@phdthesis{Hartmann, author = {Hartmann, Veronika}, title = {Methoden zur Quantifizierung und Optimierung der Robustheit von Bauablaufpl{\"a}nen}, doi = {10.25643/bauhaus-universitaet.4579}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220204-45798}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Bauablaufpl{\"a}nen kommt bei der Realisierung von Bauprojekten eine zentrale Rolle zu. Sie dienen der Koordination von Schnittstellen und bilden f{\"u}r die am Projekt Beteiligten die Grundlage f{\"u}r ihre individuelle Planung. Eine verl{\"a}ssliche Terminplanung ist daher von großer Bedeutung, tats{\"a}chlich sind aber gerade Bauablaufpl{\"a}ne f{\"u}r ihre Unzuverl{\"a}ssigkeit bekannt. Aufgrund der langen Vorlaufzeiten bei der Planung von Bauprojekten sind zum Zeitpunkt der Planung viele Informationen nur als Sch{\"a}tzwerte bekannt. Auf der Grundlage dieser gesch{\"a}tzten und damit mit Unsicherheiten behafteten Daten werden im Bauwesen deterministische Terminpl{\"a}ne erstellt. Kommt es w{\"a}hrend der Realisierung zu Diskrepanzen zwischen Sch{\"a}tzungen und Realit{\"a}t, erfordert dies die Anpassung der Pl{\"a}ne. Aufgrund zahlreicher Abh{\"a}ngigkeiten zwischen den geplanten Aktivit{\"a}ten k{\"o}nnen einzelne Plan{\"a}nderungen vielf{\"a}ltige weitere {\"A}nderungen und Anpassungen nach sich ziehen und damit einen reibungslosen Projektablauf gef{\"a}hrden. In dieser Arbeit wird ein Vorgehen entwickelt, welches Bauablaufpl{\"a}ne erzeugt, die im Rahmen der durch das Projekt definierten Abh{\"a}ngigkeiten und Randbedingungen in der Lage sind, {\"A}nderungen m{\"o}glichst gut zu absorbieren. Solche Pl{\"a}ne, die bei auftretenden {\"A}nderungen vergleichsweise geringe Anpassungen des Terminplans erfordern, werden hier als robust bezeichnet. Ausgehend von Verfahren der Projektplanung und Methoden zur Ber{\"u}cksichtigung von Unsicherheiten werden deterministische Terminpl{\"a}ne bez{\"u}glich ihres Verhaltens bei eintretenden {\"A}nderungen betrachtet. Hierf{\"u}r werden zun{\"a}chst m{\"o}gliche Unsicherheiten als Ursachen f{\"u}r {\"A}nderungen benannt und mathematisch abgebildet. Damit kann das Verhalten von Abl{\"a}ufen f{\"u}r m{\"o}gliche {\"A}nderungen betrachtet werden, indem die durch {\"A}nderungen erzwungenen angepassten Terminpl{\"a}ne simuliert werden. F{\"u}r diese Monte-Carlo-Simulationen der angepassten Terminpl{\"a}ne wird sichergestellt, dass die angepassten Terminpl{\"a}ne logische Weiterentwicklungen des deterministischen Terminplans darstellen. Auf der Grundlage dieser Untersuchungen wird ein stochastisches Maß zur Quantifizierung der Robustheit erarbeitet, welches die F{\"a}higkeit eines Planes, {\"A}nderungen zu absorbieren, beschreibt. Damit ist es m{\"o}glich, Terminpl{\"a}ne bez{\"u}glich ihrer Robustheit zu vergleichen. Das entwickelte Verfahren zur Quantifizierung der Robustheit wird in einem Optimierungsverfahren auf Basis Genetischer Algorithmen angewendet, um gezielt robuste Terminpl{\"a}ne zu erzeugen. An Beispielen werden die Methoden demonstriert und ihre Wirksamkeit nachgewiesen.}, subject = {Bauablaufplanung}, language = {de} } @inproceedings{OPUS4-3785, title = {30. Forum Bauinformatik}, editor = {Steiner, Maria and Theiler, Michael and Mirboland, Mahsa}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180917-37854}, pages = {424}, abstract = {Die Bauhaus-Universit{\"a}t Weimar ist seit langer Zeit mit dem Forum Bauinformatik eng verbunden. So wurde die Veranstaltung 1989 hier durch den Arbeitskreis Bauinformatik ins Leben gerufen und auch das 10. und 18. Forum Bauinformatik (1998 bzw. 2006) fand in Weimar statt. In diesem Jahr freuen wir uns daher besonders, das 30. Jubil{\"a}um an der Bauhaus-Universit{\"a}t Weimar ausrichten zu d{\"u}rfen und viele interessierte Wissenschaftler und Wissenschaftlerinnen aus dem Bereich der Bauinformatik in Weimar willkommen zu heißen. Das Forum Bauinformatik hat sich l{\"a}ngst zu einem festen Bestandteil der Bauinformatik im deutschsprachigen Raum entwickelt. Dabei steht es traditionsgem{\"a}ß unter dem Motto „von jungen Forschenden f{\"u}r junge Forschende", wodurch insbesondere Nachwuchswissenschaftlerinnen und ‑wissenschaftlern die M{\"o}glichkeit geboten wird, ihre Forschungsarbeiten zu pr{\"a}sentieren, Problemstellungen fachspezifisch zu diskutieren und sich {\"u}ber den neuesten Stand der Forschung zu informieren. Zudem wird eine ausgezeichnete Gelegenheit geboten, in die wissenschaftliche Gemeinschaft im Bereich der Bauinformatik einzusteigen und Kontakte mit anderen Forschenden zu kn{\"u}pfen. In diesem Jahr erhielten wir 49 interessante und qualitativ hochwertige Beitr{\"a}ge vor allem in den Themenbereichen Simulation, Modellierung, Informationsverwaltung, Geoinformatik, Structural Health Monitoring, Visualisierung, Verkehrssimulation und Optimierung. Daf{\"u}r m{\"o}chten wir uns ganz besonders bei allen Autoren, Co-Autoren und Reviewern bedanken, die durch ihr Engagement das diesj{\"a}hrige Forum Bauinformatik erst m{\"o}glich gemacht haben. Wir danken zudem Professor Große und Professor D{\´i}az f{\"u}r die Unterst{\"u}tzung bei der Auswahl der Beitr{\"a}ge f{\"u}r die Best Paper Awards. Ein herzliches Dankesch{\"o}n geht an die Kollegen an der Professur Informatik im Bauwesen der Bauhaus-Universit{\"a}t Weimar f{\"u}r die organisatorische, technische und beratende Unterst{\"u}tzung w{\"a}hrend der Planung der Veranstaltung.}, subject = {Bauinformatik}, language = {de} } @inproceedings{FediorHamel, author = {Fedior, Marco and Hamel, Wido}, title = {Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien}, series = {30. Forum Bauinformatik}, booktitle = {30. Forum Bauinformatik}, editor = {Steiner, Maria and Theiler, Michael and Mirboland, Mahsa}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3867}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190328-38678}, pages = {6}, abstract = {Der vorliegende Beitrag beschreibt die Problematik bei der Prognose verkehrsbedingter Schadstoff-Immissionen. Im Mittelpunkt steht die Entwicklung und der Aufbau einer Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien. Die Simulationsumgebung wird {\"u}ber die drei Felder Verkehr, Emission, Immission entwickelt und findet zun{\"a}chst Anwendung in der Evaluation verkehrlicher Maßnahmen f{\"u}r die Friedberger Landstraße in Frankfurt am Main.}, subject = {Verkehr}, language = {de} } @unpublished{SteinerBourinetLahmer, author = {Steiner, Maria and Bourinet, Jean-Marc and Lahmer, Tom}, title = {An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression}, doi = {10.25643/BAUHAUS-UNIVERSITAET.3832}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181218-38320}, pages = {1 -- 33}, abstract = {In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly.}, subject = {Approximation}, language = {en} } @techreport{SmarslyWiggenbrock, type = {Working Paper}, author = {Smarsly, Kay and Wiggenbrock, Jens}, title = {Automatisierte Planung von digitalen Hochgeschwindigkeitsnetzen}, doi = {10.25643/bauhaus-universitaet.3309}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170828-33095}, pages = {5}, abstract = {Der Ausbau von digitalen Hochgeschwindigkeitsnetzen ist gekennzeichnet durch neuartige Anforderungen an den Planungsprozess. Diese Anforderungen erfordern wiederum den Einsatz von neuartigen Paradigmen, die eine effiziente und zugleich genaue Planung von fl{\"a}chendeckenden Glasfasernetzen erm{\"o}glichen. Hierbei k{\"o}nnen wiederkehrende Planungsaufgaben durch eine gezielte computergest{\"u}tzte Automatisierung effizienter und genauer ausgef{\"u}hrt, als es mit bisherigen Planungskonzepten m{\"o}glich ist. Dieses Arbeitspapier beschreibt die computergest{\"u}tzte Ausf{\"u}hrung eines Planungsprozesses auf Basis von f{\"u}nf grundlegenden, iterativen Planungsschritten und gibt Empfehlungen f{\"u}r eine effiziente und genaue Planung von Glasfasernetzen. Der hier vorgestellte Ansatz erm{\"o}glicht es Netzbetreibern und Investoren, den Ausbau beliebiger Siedlungs- und Gewerbegebiete auf der zuverl{\"a}ssigen Basis von belastbarem Faktenwissen wirtschaftlich zu priorisieren.}, subject = {Kostenoptimierung}, language = {de} } @techreport{WiggenbrockSmarsly, type = {Working Paper}, author = {Wiggenbrock, Jens and Smarsly, Kay}, title = {Kosteng{\"u}nstiger Breitbandausbau mittels automatisierter Integration von Installationspl{\"a}nen und Installationskosten}, doi = {10.25643/bauhaus-universitaet.2616}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160627-26167}, pages = {6}, abstract = {Der Bedarf an leistungsf{\"a}higen Hochgeschwindigkeits-Glasfasernetzen ist in den letzten Jahren, insbesondere aufgrund der zunehmenden Nutzung von Internet-basierten Diensten, rapide gestiegen. Eine umfassende Planung von neu zu errichtenden Glasfasernetzen im Sinne eines kosteng{\"u}nstigen Breitbandausbaus ist jedoch h{\"a}ufig mit hohem Aufwand verbunden. Die Auswahl m{\"o}glicher Kabelwege und die anschließende Kalkulation der Installationskosten werden heute in der Regel durch computerbasierte Verfahren unterst{\"u}tzt, wobei allerdings die Installationspl{\"a}ne und die Installationskosten getrennt voneinander dargestellt werden, was wiederum die computergest{\"u}tzte Planung sowie weitere Optimierungsans{\"a}tze erschwert. Dieses Arbeitspapier beschreibt ein Konzept f{\"u}r ein modulares Softwaresystem zur computergest{\"u}tzten Planung, Kostenkalkulation und Visualisierung von Glasfasernetzen, das eine integrierte Darstellung von Installationspl{\"a}nen und Installationskosten erm{\"o}glicht. Anstelle der herk{\"o}mmlichen Darstellung von Installationspl{\"a}nen, die in der Regel alle geplanten Kabelwege einfarbig auf einer Landkarte visualisiert, wird ein Farbschema zur Anzeige der Installationskosten in Installationspl{\"a}nen eingesetzt. Das Konzept wird prototypisch implementiert und durch ein Anwendungsbeispiel, das die Planung eines Glasfasernetzes innerhalb eines Siedlungsgebietes behandelt, validiert. Die integrierte, farbige Darstellung der Installationskosten in Installationspl{\"a}nen erm{\"o}glicht eine effiziente Identifikation der kostenintensiven Bauabschnitte und bef{\"o}rdert kostenoptimierte Planungsans{\"a}tze. Die intuitive Visualisierung vereinfacht somit die akkurate und kostenoptimierte Planung von Glasfasernetzen.}, subject = {Visualisierung}, language = {de} } @article{SmarslyHartmannRueppeletal., author = {Smarsly, Kay and Hartmann, Timo and R{\"u}ppel, Uwe and K{\"o}nig, Markus}, title = {Positionspapier des Arbeitskreis Bauinformatik}, editor = {Smarsly, Kay}, doi = {10.25643/bauhaus-universitaet.3221}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170523-32219}, pages = {5}, abstract = {Die Bauinformatik ist eine S{\"a}ule der modernen Bau- und Umweltingenieurwissenschaften und befasst sich mit der Erforschung grundlegender informatorischer Methoden sowie mit der Anwendung und Weiterentwicklung der Informationswissenschaften im Bau- und Umweltbereich. Der Arbeitskreis Bauinformatik konstituiert sich aus Wissenschaftlern, die an Universit{\"a}ten im deutschsprachigen Raum auf dem Fachgebiet Bauinformatik lehren und forschen. Ausgehend vom erreichten Entwicklungsstand der Bauinformatik skizziert dieses Positionspapier die Aufgaben des Arbeitskreises und formuliert eine Grundlage f{\"u}r eine abgestimmte Weiterentwicklung an den deutschsprachigen Universit{\"a}ten.}, subject = {Bauinformatik}, language = {de} } @inproceedings{IgnatovaKirschkeTauscheretal., author = {Ignatova, Elena and Kirschke, Heiko and Tauscher, Eike and Smarsly, Kay}, title = {PARAMETRIC GEOMETRIC MODELING IN CONSTRUCTION PLANNING USING INDUSTRY FOUNDATION CLASSES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2802}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28024}, pages = {8}, abstract = {One of the most promising and recent advances in computer-based planning is the transition from classical geometric modeling to building information modeling (BIM). Building information models support the representation, storage, and exchange of various information relevant to construction planning. This information can be used for describing, e.g., geometric/physical properties or costs of a building, for creating construction schedules, or for representing other characteristics of construction projects. Based on this information, plans and specifications as well as reports and presentations of a planned building can be created automatically. A fundamental principle of BIM is object parameterization, which allows specifying geometrical, numerical, algebraic and associative dependencies between objects contained in a building information model. In this paper, existing challenges of parametric modeling using the Industry Foundation Classes (IFC) as a federated model for integrated planning are shown, and open research questions are discussed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SmarslyTauscher, author = {Smarsly, Kay and Tauscher, Eike}, title = {IFC-BASED MONITORING INFORMATION MODELING FOR DATA MANAGEMENT IN STRUCTURAL HEALTH MONITORING}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2823}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28237}, pages = {7}, abstract = {This conceptual paper discusses opportunities and challenges towards the digital representation of structural health monitoring systems using the Industry Foundation Classes (IFC) standard. State-of-the-art sensor nodes, collecting structural and environmental data from civil infrastructure systems, are capable of processing and analyzing the data sets directly on-board the nodes. Structural health monitoring (SHM) based on sensor nodes that possess so called "on-chip intelligence" is, in this study, referred to as "intelligent SHM", and the infrastructure system being equipped with an intelligent SHM system is referred to as "intelligent infrastructure". Although intelligent SHM will continue to grow, it is not possible, on a well-defined formalism, to digitally represent information about sensors, about the overall SHM system, and about the monitoring strategies being implemented ("monitoring-related information"). Based on a review of available SHM regulations and guidelines as well as existing sensor models and sensor modeling languages, this conceptual paper investigates how to digitally represent monitoring-related information in a semantic model. With the Industry Foundation Classes, there exists an open standard for the digital representation of building information; however, it is not possible to represent monitoring-related information using the IFC object model. This paper proposes a conceptual approach for extending the current IFC object model in order to include monitoring-related information. Taking civil infrastructure systems as an illustrative example, it becomes possible to adequately represent, process, and exchange monitoring-related information throughout the whole life cycle of civil infrastructure systems, which is referred to as monitoring information modeling (MIM). However, since this paper is conceptual, additional research efforts are required to further investigate, implement, and validate the proposed concepts and methods.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{OPUS4-2451, title = {International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2451}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150828-24515}, pages = {230}, abstract = {The 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 20th till 22nd July 2015. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference. We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference!}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{HartmannSmarslyLahmer, author = {Hartmann, Veronika and Smarsly, Kay and Lahmer, Tom}, title = {ROBUST SCHEDULING IN CONSTRUCTION ENGINEERING}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2799}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27994}, pages = {5}, abstract = {In construction engineering, a schedule's input data, which is usually not exactly known in the planning phase, is considered deterministic when generating the schedule. As a result, construction schedules become unreliable and deadlines are often not met. While the optimization of construction schedules with respect to costs and makespan has been a matter of research in the past decades, the optimization of the robustness of construction schedules has received little attention. In this paper, the effects of uncertainties inherent to the input data of construction schedules are discussed. Possibilities are investigated to improve the reliability of construction schedules by considering alternative processes for certain tasks and by identifying the combination of processes generating the most robust schedule with respect to the makespan of a construction project.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Gerold, author = {Gerold, Fabian}, title = {Konzepte zur interaktiven Entwurfsraum-Exploration im Tragwerksentwurf}, doi = {10.25643/bauhaus-universitaet.2153}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140408-21532}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {101}, abstract = {Der Entwurfsraum f{\"u}r den Entwurf eines Tragwerks ist ein n-dimensionaler Raum, der aus allen freien Parametern des Modells aufgespannt wird. Traditionell werden nur wenige Punkte dieses Raumes durch eine numerische (computergest{\"u}tzte) Simulation evaluiert, meist auf Basis der Finite-Elemente-Methode. Mehrere Faktoren f{\"u}hren dazu, dass heute oft viele Revisionen eines Simulationsmodells durchlaufen werden: Zum einen ergeben sich oft Planungs{\"a}nderungen, zum anderen ist oft die Untersuchung von Planungsalternativen und die Suche nach einem Optimum w{\"u}nschenswert. In dieser Arbeit soll f{\"u}r ein vorhandenes Finite-Elemente-Framework die sequentielle Datei-Eingabeschnittstelle durch eine Netzwerkschnittstelle ersetzt werden, die den Erfordernissen einer interaktiven Arbeitsweise entspricht. So erlaubt die hier konzipierte Schnittstelle interaktive, inkrementelle Modell{\"a}nderungen sowie Status- und Berechnungsergebnis-Abfragen durch eine bidirektionale Schnittstelle. Die Kombination aus interaktiver numerischer Simulation und Interoperabilit{\"a}t durch die Anwendung von Konzepten zur Bauwerks-Informations-Modellierung im Tragwerksentwurf ist Ziel dieser Dissertation. Die Beschreibung der Konzeption und prototypischen Umsetzung ist Gegenstand der schriftlichen Arbeit.}, subject = {Interaktive numerische Simulation}, language = {de} } @phdthesis{Stein, author = {Stein, Peter}, title = {Procedurally generated models for Isogeometric Analysis}, publisher = {Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-86068-488-7}, doi = {10.25643/bauhaus-universitaet.1848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130212-18483}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {82}, abstract = {Increasingly powerful hard- and software allows for the numerical simulation of complex physical phenomena with high levels of detail. In light of this development the definition of numerical models for the Finite Element Method (FEM) has become the bottleneck in the simulation process. Characteristic features of the model generation are large manual efforts and a de-coupling of geometric and numerical model. In the highly probable case of design revisions all steps of model preprocessing and mesh generation have to be repeated. This includes the idealization and approximation of a geometric model as well as the definition of boundary conditions and model parameters. Design variants leading to more resource-efficient structures might hence be disregarded due to limited budgets and constrained time frames. A potential solution to above problem is given with the concept of Isogeometric Analysis (IGA). Core idea of this method is to directly employ a geometric model for numerical simulations, which allows to circumvent model transformations and the accompanying data losses. Basis for this method are geometric models described in terms of Non-uniform rational B-Splines (NURBS). This class of piecewise continuous rational polynomial functions is ubiquitous in computer graphics and Computer-Aided Design (CAD). It allows the description of a wide range of geometries using a compact mathematical representation. The shape of an object thereby results from the interpolation of a set of control points by means of the NURBS functions, allowing efficient representations for curves, surfaces and solid bodies alike. Existing software applications, however, only support the modeling and manipulation of the former two. The description of three-dimensional solid bodies consequently requires significant manual effort, thus essentially forbidding the setup of complex models. This thesis proposes a procedural approach for the generation of volumetric NURBS models. That is, a model is not described in terms of its data structures but as a sequence of modeling operations applied to a simple initial shape. In a sense this describes the "evolution" of the geometric model under the sequence of operations. In order to adapt this concept to NURBS geometries, only a compact set of commands is necessary which, in turn, can be adapted from existing algorithms. A model then can be treated in terms of interpretable model parameters. This leads to an abstraction from its data structures and model variants can be set up by variation of the governing parameters. The proposed concept complements existing template modeling approaches: templates can not only be defined in terms of modeling commands but can also serve as input geometry for said operations. Such templates, arranged in a nested hierarchy, provide an elegant model representation. They offer adaptivity on each tier of the model hierarchy and allow to create complex models from only few model parameters. This is demonstrated for volumetric fluid domains used in the simulation of vertical-axis wind turbines. Starting from a template representation of airfoil cross-sections, the complete "negative space" around the rotor blades can be described by a small set of model parameters, and model variants can be set up in a fraction of a second. NURBS models offer a high geometric flexibility, allowing to represent a given shape in different ways. Different model instances can exhibit varying suitability for numerical analyses. For their assessment, Finite Element mesh quality metrics are regarded. The considered metrics are based on purely geometric criteria and allow to identify model degenerations commonly used to achieve certain geometric features. They can be used to decide upon model adaptions and provide a measure for their efficacy. Unfortunately, they do not reveal a relation between mesh distortion and ill-conditioning of the equation systems resulting from the numerical model.}, subject = {NURBS}, language = {en} } @phdthesis{Tauscher2011, author = {Tauscher, Eike}, title = {Vom Bauwerksinformationsmodell zur Terminplanung - Ein Modell zur Generierung von Bauablaufpl{\"a}nen}, isbn = {978-3-86068-452-8}, doi = {10.25643/bauhaus-universitaet.1466}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110927-15572}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2011}, abstract = {Die effiziente und zielgerichtete Ausf{\"u}hrung von Bauvorhaben wird in hohem Maße von der zugrunde liegenden Bauablaufplanung beeinflusst. Dabei ist unter Verwendung herk{\"o}mmlicher Methoden und Modelle die Planung des Bauablaufs ein zumeist aufw{\"a}ndiger und fehlertr{\"a}chtiger Prozess. Am Ende der gegenw{\"a}rtig {\"u}blichen Vorgehensweise f{\"u}r die Planung eines Bauablaufs erfolgt lediglich die Dokumentation des Endergebnisses. M{\"o}gliche Ablaufalternativen, die im Verlauf der Planung betrachtet wurden, sind im resultierenden Bauablaufplan nicht enthalten und gehen verloren. Eine formale Kontrolle des geplanten Bauablaufs hinsichtlich seiner Vollst{\"a}ndigkeit ist nur begrenzt m{\"o}glich, da beispielsweise existierende Methoden der 4D-Visualisierung derzeit nicht ausreichend in den Prozess der Planung von Bauabl{\"a}ufen integriert sind. Gegenstand der vorliegenden Arbeit ist die Entwicklung eines neuen Modells f{\"u}r die Unterst{\"u}tzung der Bauablaufplanung. Daf{\"u}r wird der gr{\"o}ßtenteils manuelle Vorgang der Bauablaufplanung auf Basis verf{\"u}gbarer Bauwerksinformationsmodelle (BIM) weitestgehend automatisiert und die Methodik der 4D-Animation in den Prozess der Bauablaufplanung integriert. Ausgehend von in einer Erfahrungsdatenbank gespeicherten Informationen werden auf Basis einer {\"A}hnlichkeitsermittlung Bauteilen des betrachteten BIM geeignete Vorg{\"a}nge zugeordnet und mittels Algorithmen der Graphentheorie ein Workflowgraph aller m{\"o}g\-lichen Bauablaufvarianten generiert. Aufgrund der vorgenommenen Kopplung des Bauablaufplans mit Bauteilen eines BIM und der visuellen Darstellung des Bauablaufs kann vom Planer im Rahmen der Modellierungsgenauigkeit des BIM auf die Vollst{\"a}ndigkeit des Bauablaufplans geschlossen werden. Dies erm{\"o}glicht dem Anwender ein hohes Maß an Kontrolle des geplanten Bauablaufs bereits innerhalb der Planungsphase. Weiterhin unterst{\"u}tzt das entwickelte Modell die Integration von Ablaufvarianten, was deren Gegen{\"u}berstellung erm{\"o}glicht und die Wiederverwendbarkeit bereits geplanter Bauabl{\"a}ufe durch eine entsprechend ausgerichtete Abbildung des Modells. Die Anwendbarkeit des erarbeiteten Modells wird anhand einer prototypischen Implementierung nachgewiesen und anhand eines Praxisbeispiels verifiziert.}, subject = {Terminplanung}, language = {de} } @inproceedings{TheilerTauscherTulkeetal., author = {Theiler, Michael and Tauscher, Eike and Tulke, Jan and Riedel, Thomas}, title = {Boolesche Operationen f{\"u}r die Visualisierung von IFC-Geb{\"a}udemodellen}, series = {Forum Bauinformatik 2010}, booktitle = {Forum Bauinformatik 2010}, editor = {Kr{\"a}mer, Torsten}, publisher = {Shaker Verlag}, address = {Aachen}, isbn = {978-3-8322-9456-4}, doi = {10.25643/bauhaus-universitaet.1815}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130107-18151}, pages = {251 -- 258}, abstract = {Die Planung von komplexen Bauwerken erfolgt zunehmend mit Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der IFC (Industry Foundation Classes) erlauben. Durch die Verf{\"u}gbarkeit dieser Schnittstelle ist es m{\"o}glich, Bauwerksinformationen f{\"u}r die weiterf{\"u}hrende Verarbeitung zu verwenden. Zur Visualisierung der geometrischen Daten stehen innerhalb der IFC verschiedene geometrische Modelle f{\"u}r die Darstellung von Bauteilen zur Verf{\"u}gung. Unter anderem werden f{\"u}r das „Ausschneiden" von {\"O}ffnungen aus Bauteilen (z.B. f{\"u}r Fenster und T{\"u}ren) geometrische boolesche Operationen ben{\"o}tigt. Gegenstand des Beitrags ist die Vorstellung eines Algorithmus zur Berechnung von booleschen Operationen auf Basis eines triangulierten B-Rep (Boundary Representation) Modells nach HUBBARD (1990). Da innerhalb von IFC-Geb{\"a}udemodellen Bauteile oft das Resultat mehrerer boolescher Operationen sind (z.B. um mehrere Fenster{\"o}ffnungen von einer gegebenen Wand abzuziehen), wurde der Algorithmus von Hubbard angepasst, sodass mehrere boolesche Operationen gleichzeitig berechnet werden k{\"o}nnen. Durch diese Optimierung wird eine deutliche Reduzierung der ben{\"o}tigten Berechnungen und somit der Rechenzeit erreicht.}, subject = {IFC}, language = {de} } @misc{Theiler, author = {Theiler, Michael}, title = {Documentation and conceptual development of software components for the execution of geometric Boolean set operations on the basis of Java3D}, doi = {10.25643/bauhaus-universitaet.1943}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130603-19430}, pages = {50}, abstract = {Complex buildings and other structures are cumulatively planned with software that supports the export of building information in the STEP-format on the basis of the IFC (Industry Foundation Classes). Because of the availability of this interface, it is possible to use the data of a building for further processing. Within the IFC, several geometrical models for the visualization of building elements are provided. Among others, geometric Boolean set operations are needed to "subtract" openings from building elements (e.g. for windows or doors) - CSG (Constructive Solid Geometry). Therefore, software components based on the algorithms [Laidlaw86] and [Hubbard90] were developed at the professorship Informatik im Bauwesen that support these functionalities on the basis of Java3D. However, it turned out in praxis, that these components are numerically instable and that there is no acceptable robustness or tolerance of errors. This is caused by mistakes in the implementation (bugs) as well as the insufficient handling of numerical inaccuracies. Further, a verification and, where applicable, a correction of qualitative substandard initial data is missing. Prior to this student research project, the implementation of a self-contained application for a visual error control was initiated. This tool visualizes several program steps and their corresponding data. With use of this tool, the implemented algorithms can be analyzed in detail. The papers [Laidlaw86] and [Hubbard90] are unsatisfactory describing some essential steps of the algorithm as well as implementation details to execute Boolean set operations on the basis of a B-rep (Boundary Representation) model. Hence, the algorithm should be documented comprehensible with the help of figures and pseudo code. Moreover, problems within the existing implementation shall be identified and possible solution strategies shall be provided.}, subject = {Boolean Operations}, language = {en} } @misc{Theiler, type = {Master Thesis}, author = {Theiler, Michael}, title = {Interaktive Visualisierung von Qualit{\"a}tsdefiziten komplexer Bauwerksinformationsmodelle auf Basis der Industry Foundation Classes (IFC) in einer webbasierten Umgebung}, doi = {10.25643/bauhaus-universitaet.1786}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121214-17869}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {93}, abstract = {Der inhaltlichen Qualit{\"a}tssicherung von Bauwerksinformationsmodellen (BIM) kommt im Zuge einer stetig wachsenden Nutzung der verwendeten BIM f{\"u}r unterschiedliche Anwen-dungsf{\"a}lle eine große Bedeutung zu. Diese ist f{\"u}r jede am Datenaustausch beteiligte Software dem Projektziel entsprechend durchzuf{\"u}hren. Mit den Industry Foundation Classes (IFC) steht ein etabliertes Format f{\"u}r die Beschreibung und den Austausch eines solchen Modells zur Verf{\"u}gung. F{\"u}r den Prozess der Qualit{\"a}tssicherung wird eine serverbasierte Testumgebung Bestandteil des neuen Zertifizierungsverfahrens der IFC sein. Zu diesem Zweck wurde durch das „iabi - Institut f{\"u}r angewandte Bauinformatik" in Zusammenarbeit mit „buildingSMART e.V." (http://www.buildingsmart.de) ein Global Testing Documentation Server (GTDS) implementiert. Der GTDS ist eine, auf einer Datenbank basierte, Web-Applikation, die folgende Intentionen verfolgt: • Bereitstellung eines Werkzeugs f{\"u}r das qualitative Testen IFC-basierter Modelle • Unterst{\"u}tzung der Kommunikation zwischen IFC Entwicklern und Anwendern • Dokumentation der Qualit{\"a}t von IFC-basierten Softwareanwendungen • Bereitstellung einer Plattform f{\"u}r die Zertifizierung von IFC Anwendungen Gegenstand der Arbeit ist die Planung und exemplarische Umsetzung eines Werkzeugs zur interaktiven Visualisierung von Qualit{\"a}tsdefiziten, die vom GTDS im Modell erkannt wurden. Die exemplarische Umsetzung soll dabei aufbauend auf den OPEN IFC TOOLS (http://www.openifctools.org) erfolgen.}, subject = {BIM}, language = {de} } @inproceedings{TheilerTauscherTulkeetal., author = {Theiler, Michael and Tauscher, Eike and Tulke, Jan and Riedel, Thomas}, title = {Visualisierung von IFC-Objekten mittels Java3D}, series = {Forum Bauinformatik 2009}, booktitle = {Forum Bauinformatik 2009}, editor = {von Both, Petra and Koch, Volker}, publisher = {Universit{\"a}tsverlag}, address = {Karlsruhe}, isbn = {978-3-86644-396-9}, doi = {10.25643/bauhaus-universitaet.1814}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130107-18149}, pages = {149 -- 159}, abstract = {Die Planung komplexer Bauwerke erfolgt zunehmend mit rechnergest{\"u}tzten Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der Industry Foundation Classes (IFC) erm{\"o}glichen. Durch die Verf{\"u}gbarkeit dieser Schnittstelle ist es m{\"o}glich, Bauwerksinformationen f{\"u}r eine weiterf{\"u}hrende applikations{\"u}bergreifende Verarbeitung bereitzustellen. Ein großer Teil der bereitgestellten Informationen bezieht sich auf die geometrische Beschreibung der einzelnen Bauteile. Um den am Bauprozess Beteiligten eine optimale Auswertung und Analyse der Bauwerksinformationen zu erm{\"o}glichen, ist deren Visualisierung unumg{\"a}nglich. Das IFC-Modell stellt diese Daten mit Hilfe verschiedener Geometriemodelle bereit. Der vorliegende Beitrag beschreibt die Visualisierung von IFC-Objekten mittels Java3D. Er beschr{\"a}nkt sich dabei auf die Darstellung von Objekten, deren Geometrie mittels Boundary Representation (Brep) oder Surface-Model-Repr{\"a}sentation beschrieben wird.}, subject = {IFC}, language = {de} } @phdthesis{Richter2009, author = {Richter, Torsten}, title = {Konzepte f{\"u}r den Einsatz versionierter Objektmodelle im Bauwesen}, doi = {10.25643/bauhaus-universitaet.1413}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100115-14935}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {Bauwerke sind in der Regel Unikate, f{\"u}r die meist eine komplette und aufw{\"a}ndige Neuplanung durchzuf{\"u}hren ist. Der Umfang und die Verschiedenartigkeit der einzelnen Planungsaufgaben bedingen ein paralleles Arbeiten der beteiligten Fachplaner. Dar{\"u}ber hinaus ist die Bauplanung ein kreativer und iterativer Prozess, der durch h{\"a}ufige {\"A}nderungen des Planungsmaterials und Abstimmungen zwischen den Fachplanern gekennzeichnet ist. Mithilfe von speziellen Fachanwendungen erstellen die Planungsbeteiligten verschiedene Datenmodelle, zwischen denen fachliche Abh{\"a}ngigkeiten bestehen. Ziel der Arbeit ist es, die Konsistenz der einzelnen Fachmodelle eines Bauwerks sicherzustellen, indem Abh{\"a}ngigkeiten auf Basis von Objektversionen definiert werden. Voraussetzung daf{\"u}r ist, dass die Fachanwendungen nach dem etablierten Paradigma der objektorientierten Programmierung entwickelt wurden. Das sequentielle und parallele Arbeiten mehrerer Fachplaner wird auf Basis eines optimistischen Zugriffsmodells unterst{\"u}tzt, das ohne Schreibsperren auskommt. Weiterhin wird die Historie des Planungsmaterials gespeichert und die Definition von rechtsverbindlichen Freigabest{\"a}nden erm{\"o}glicht. Als Vorbild f{\"u}r die Systemarchitektur diente das Softwarekonfigurationsmanagement, dessen Versionierungsansatz meist auf einem Client-Server-Modell beruht. Die formale Beschreibung des verwendeten Ansatzes wird {\"u}ber die Mengenlehre und Relationenalgebra vorgenommen, so dass er allgemeing{\"u}ltig und technologieunabh{\"a}ngig ist. Auf Grundlage dieses Ansatzes werden Konzepte f{\"u}r den Einsatz versionierter Objektmodelle im Bauwesen erarbeitet und mit einer Pilotimplementierung basierend auf einer Open-Source-Ingenieurplattform an einem praxisnahen Szenario verifiziert. Beim Entwurf der Konzepte wird besonderer Wert auf die Handhabbarkeit der Umsetzung gelegt. Das betrifft im Besonderen die hierarchische Strukturierung des Projektmaterials, die ergonomische Gestaltung der Benutzerschnittstellen und der Erzielung von geringen Anwortzeiten. Diese Aspekte sind eine wichtige Voraussetzung f{\"u}r die Effizienz und Akzeptanz von Software im praktischen Einsatz. Bestehende Fachanwendungen k{\"o}nnen durch geringen Entwicklungsaufwand einfach in die verteilte Umgebung integriert werden, ohne sie von Grund auf programmieren zu m{\"u}ssen.}, subject = {Computer Supported Cooperative Work}, language = {de} } @phdthesis{Tulke2009, author = {Tulke, Jan}, title = {Kollaborative Terminplanung auf Basis von Bauwerksinformationsmodellen}, isbn = {978-3-86068-416-0}, doi = {10.25643/bauhaus-universitaet.1424}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100805-15135}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {Im Rahmen des sich derzeit vollziehenden Wandels von der segmentierten, zeichnungsorientierten zur integrierten, modellbasierten Arbeitsweise bei der Planung von Bauwerken und ihrer Erstellung werden Computermodelle nicht mehr nur f{\"u}r die physikalische Simulation des Bauwerksverhaltens, sondern auch zur Koordination zwischen den einzelnen Planungsdisziplinen und Projektbeteiligten genutzt. Die gemeinsame Erstellung und Nutzung dieses Modells zur virtuellen Abbildung des Bauwerks und seiner Erstellungsprozesse, das sog. Building Information Modeling (BIM), ist dabei zentraler Bestandteil der Planung. Die Integration der Terminplanung in diese Arbeitsweise erfolgt bisher jedoch nur unzureichend, meist lediglich in der Form einer nachgelagerten 4D-Simulation zur Kommunikation der Planungsergebnisse. Sie weist damit im Verh{\"a}ltnis zum entstehenden Zusatzaufwand einen zu geringen Nutzen f{\"u}r den Terminplaner auf. Gegenstand der vorliegenden Arbeit ist die tiefere Einbettung der Terminplanung in die modellbasierte Arbeitsweise. Auf Basis einer umfassende Analyse der Rahmenbedingungen und des Informationsbedarfs der Terminplanung werden Konzepte zur effizienten Wiederverwendung von im Modell gespeicherten Daten mit Hilfe einer Verkn{\"u}pfungssprache, zum umfassenden Datenaustausch auf Basis der Industry Foundation Classes (IFC) und f{\"u}r das {\"A}nderungsmanagement mittels einer Versionierung auf Objektebene entwickelt.Die f{\"u}r die modellbasierte Terminplanung relevanten Daten und ihre Beziehungen zueinander werden dabei formal beschrieben sowie die Kompatibilit{\"a}t ihrer Granularit{\"a}t durch eine Funktionalit{\"a}t zur Objektteilung sichergestellt. Zur zielgenauen Extraktion von Daten werden zudem Algorithmen f{\"u}r r{\"a}umliche Anfragen entwickelt. Die vorgestellten Konzepte und ihre Anwendbarkeit werden mittels einer umfangreichen Pilotimplementierung anhand von mehreren Praxisbeispielen demonstriert und somit deren praktische Relevanz und Nutzen nachgewiesen.}, subject = {Terminplanung}, language = {de} } @phdthesis{Nour2006, author = {Nour, Mohamed}, title = {A Flexible Model for Incorporating Construction Product Data into Building Information Models}, doi = {10.25643/bauhaus-universitaet.740}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060317-7781}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2006}, abstract = {When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work.}, subject = {Produktinformation}, language = {en} } @phdthesis{Beer2005, author = {Beer, Daniel G.}, title = {Systementwurf f{\"u}r verteilte Applikationen und Modelle im Bauplanungsprozess}, doi = {10.25643/bauhaus-universitaet.750}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060418-7892}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2005}, abstract = {Der Planungsprozess im Konstruktiven Ingenieurbau ist gekennzeichnet durch drei sich zyklisch wiederholende Phasen: die Phase der Aufgabenverteilung, die Phase der parallelen Bearbeitung mit entsprechenden Abstimmungen und die Phase der Zusammenf{\"u}hrung der Ergebnisse. Die verf{\"u}gbare Planungssoftware unterst{\"u}tzt {\"u}berwiegend nur die Bearbeitung in der zweiten Phase und den Austausch der Datenbest{\"a}nde durch Dokumente. Gegenstand der Arbeit ist die Entwicklung einer Systemarchitektur, die in ihrem Grundsatz alle Phasen der verteilten Bearbeitung und unterschiedliche Arten der Kooperation (asynchron, parallel, wechselseitig) ber{\"u}cksichtigt und bestehende Anwendungen integriert. Das gemeinsame Arbeitsmaterial der Beteiligten wird nicht als Dokumentmenge, sondern als Menge von Objekt- und Elementversionen und deren Beziehungen abstrahiert. Elemente erweitern Objekte um applikationsunabh{\"a}ngige Eigenschaften (Features). F{\"u}r die Bearbeitung einer Aufgabe werden Teilmengen auf Basis der Features gebildet, f{\"u}r deren Elemente neue Versionen abgeleitet und in einen privaten Arbeitsbereich geladen werden. Die Bearbeitung wird auf Operationen zur{\"u}ckgef{\"u}hrt, mit denen das gemeinsame Arbeitsmaterial konsistent zu halten ist. Die Systemarchitektur wird formal mit Mitteln der Mathematik beschrieben, verf{\"u}gbare Technologie beschrieben und deren Einsatz in einem Umsetzungskonzept dargestellt. Das Umsetzungskonzept wird pilothaft implementiert. Dies erfolgt in der Umgebung des Internet in der Sprache Java unter Verwendung eines Versionsverwaltungswerkzeuges und relationalen Datenbanken.}, subject = {Planungsprozess}, language = {de} } @inproceedings{HauschildBorrmannHuebler2004, author = {Hauschild, Thomas and Borrmann, Andr{\´e} and H{\"u}bler, Reinhard}, title = {Integration of Constraints into Digital Building Models for Cooperative Planning Processes}, doi = {10.25643/bauhaus-universitaet.177}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1775}, year = {2004}, abstract = {The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given.}, subject = {Architektur}, language = {en} } @inproceedings{SoibelmanO'BrienElvin2004, author = {Soibelman, Lucio and O'Brien, William and Elvin, George}, title = {Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design}, doi = {10.25643/bauhaus-universitaet.194}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1948}, year = {2004}, abstract = {The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students.}, subject = {Hochschulbildung}, language = {en} } @inproceedings{KellerAntoniadisMenzel2004, author = {Keller, Martin and Antoniadis, George and Menzel, Karsten}, title = {Resource Management for the Construction Industry}, doi = {10.25643/bauhaus-universitaet.167}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1679}, year = {2004}, abstract = {The management of resources is an essential task in each construction company. Today, ERP systems and e-Business systems are available to assist construction companies to efficiently organise the allocation of their personnel and equipment within the company, but they cannot provide the company with the idle resources for every single task that has to be performed during a construction project. Therefore, companies should have an alternative solution to better exploit expensive resources and compensate their fixed costs, but also have them available at the right time for their own business activities. This paper outlines the approach taken by the EU funded project "e-Sharing" (IST-2001-33325) to support resource management between construction companies. It will describe requirements for the management of construction resources, its core features, and the integration approach. Therefore, we will outline the approach of an integrated resource type model supporting the management and classification of construction equipment, construction tasks and qualification profiles. The development is based on a cross-domain analysis and evaluation of existing models. ...}, subject = {Baubetrieb}, language = {en} } @article{LikhitruangsilpIoannou2004, author = {Likhitruangsilp, Veerasak and Ioannou, Photios}, title = {Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating}, doi = {10.25643/bauhaus-universitaet.224}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2247}, year = {2004}, abstract = {This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor's risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor's risk preference.}, subject = {Mehragentensystem}, language = {en} } @article{YabukiKotaniShitani2004, author = {Yabuki, Nobuyoshi and Kotani, Jun and Shitani, Tomoaki}, title = {A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents}, doi = {10.25643/bauhaus-universitaet.214}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2146}, year = {2004}, abstract = {This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system.}, subject = {Mehragentensystem}, language = {en} } @inproceedings{MenzelDittrichDomschke2004, author = {Menzel, Karsten and Dittrich, J{\"o}rg and Domschke, Sven}, title = {About the implantation process of mobile computing in AEC}, doi = {10.25643/bauhaus-universitaet.110}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1106}, year = {2004}, abstract = {The AEC industry is conscious of the potentials arising from the usage of mobile computer systems to increase productivity by streamlining their business processes. Discussions are no longer on whether or not to use a mobile computer solution, but rather, on how it should be used. However, the implantation process of this new technology in Architecture, Engineering and Construction (AEC) and Facility Management (FM) practise is very slow and should be improved. One way to encourage and ease the usage of mobile computer systems in AEC is a more process-oriented usability and context appropriateness of mobile computer solutions. Context-sensitivity is defined as a crucial feature to be taken into account for further research in the area of Mobile Computing. Context-sensitive, mobile IT-solutions depend on two features: (1) flexible definitions of (construction) processes describing the context and (2) tools for flexible, multi-dimensional information management representing the context. It is on this premise that the authors propose the n-dimensional data management approach for the implementation of mobile computing solutions. In this paper, we analyse working scenarios in the AEC and FM sector, defining context aspects which are transformed and formalized as dimension hierarchies of the envisaged context model.}, subject = {Mobile Computing}, language = {en} } @article{vanTreeckRank2004, author = {van Treeck, Christoph and Rank, Ernst}, title = {Analysis of building structure and topology based on Graph Theory}, doi = {10.25643/bauhaus-universitaet.230}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2308}, year = {2004}, abstract = {Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation.}, subject = {Produktmodell}, language = {en} } @inproceedings{GordonAkinciGarrett2004, author = {Gordon, Chris and Akinci, Burcu and Garrett, James H.}, title = {An Approach for Planning Sensor-Based Inspection of the Built Environment}, doi = {10.25643/bauhaus-universitaet.150}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1500}, year = {2004}, abstract = {The promise of lower costs for sensors that can be used for construction inspection means that inspectors will continue to have new choices to consider in creating inspection plans. However, these emerging inspection methods can require different activities, resources, and decisions such that it can be difficult to compare the emerging methods with other methods that satisfy the same inspection needs. Furthermore, the context in which inspection is performed can significantly influence how well certain inspection methods are suited for a given set of goals for inspection. Context information, such as weather, security, and the regulatory environment, can be used to understand what information about a component should be collected and how an inspection should be performed. The research described in this paper is aimed at developing an approach for comparing and selecting inspection plans. This approach consists of (1) refinement of given goals for inspection, if necessary, in order to address any additional information needs due to a given context and in order to reach a level of detail that can be addressed by an inspection activity; (2) development of constraints to describe how an inspection should be achieved; (3) matching of goals to available inspection methods, and generation of activities and resource plans in order to address the goals; and (4) selection of an inspection plan from among the possible plans that have been identified. The authors illustrate this approach with observations made at a local construction site.}, subject = {Monitor{\"u}berwachung}, language = {en} } @inproceedings{vanRooyenOlivier2004, author = {van Rooyen, G.C. and Olivier, A. H.}, title = {Notes on structural analysis in a distributed collaboratory}, doi = {10.25643/bauhaus-universitaet.145}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1451}, year = {2004}, abstract = {The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{ChengLauLaw2004, author = {Cheng, Jinxing and Lau, Gloria and Law, Kincho}, title = {A simulation access language and framework for project management applications}, doi = {10.25643/bauhaus-universitaet.156}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1567}, year = {2004}, abstract = {As computer programs become ever more complex, software development has shifted from focusing on programming towards focusing on integration. This paper describes a simulation access language (SimAL) that can be used to access and compose software applications over the Internet. Specifically, the framework is developed for the integration of tools for project management applications. The infrastructure allows users to specify and to use existing heterogeneous tools (e.g., Microsoft Project, Microsoft Excel, Primavera Project Planner, and AutoCAD) for simulation of project scenarios. This paper describes the components of the SimAL language and the implementation efforts required in the development of the SimAL framework. An illustration example bringing on-line weather forecasting service for project scheduling and management applications is provided to demonstrate the use of the simulation language and the infrastructure framework.}, subject = {Hochschulbildung}, language = {en} } @inproceedings{JianpingTianyiQiping2004, author = {Jianping, Zhang and Tianyi, Ma and Qiping, Shen}, title = {Application of Data Warehouse and Data Mining in Construction Management}, doi = {10.25643/bauhaus-universitaet.124}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1247}, year = {2004}, abstract = {All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper.}, subject = {Bauwerk}, language = {en} } @article{WeiseKatranuschkovScherer2004, author = {Weise, Matthias and Katranuschkov, Peter and Scherer, Raimar J.}, title = {Generic Services for the Support of Evolving Building Model Data}, doi = {10.25643/bauhaus-universitaet.207}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2077}, year = {2004}, abstract = {Many problems related to data integration in AEC can be better tackled by an approach that takes into account the heterogeneity of tasks, models and applications but does not require continuous consistency of the evolving design data, at each data management operation. Such an approach must incorporate adequate services that can facilitate reintegration of concurrently modified data at reasonably selected coordination points. In this paper we present a set of methods which, used in combination, can achieve that goal. After a description of the principal envisaged cooperative work scenario each of these methods is discussed in detail and current observations drawn from their software realisation are given. Whilst the suggested approach is valid for any EXPRESS-based data model, the practical focus of work has been on facilitating IFC-driven integration.}, subject = {Produktmodell}, language = {en} } @inproceedings{KoenigKlingerBerkhahn2004, author = {K{\"o}nig, Markus and Klinger, Axel and Berkhahn, Volker}, title = {Structural Correctness of Planning Processes in Building Engineering}, doi = {10.25643/bauhaus-universitaet.169}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1690}, year = {2004}, abstract = {The planning of projects in building engineering is a complex process which is characterized by a dynamical composition and many modifications during the definition and execution time of processes. For a computer-aided and network-based cooperation a formal description of the planning process is necessary. In the research project "Relational Process Modelling in Cooperative Building Planning" a process model is described by three parts: an organizational structure with participants, a building structure with states and a process structure with activities. This research project is part of the priority program 1103 "Network-Based Cooperative Planning Processes in Structural Engineering" promoted by the German Research Foundation (DFG). Planning processes in civil engineering can be described by workflow graphs. The process structure describes the logical planning process and can be formally defined by a bipartite graph. This structure consists of activities, transitions and relationships between activities and transitions. In order to minimize errors at execution time of a planning process a consistent and structurally correct process model must be guaranteed. This contribution considers the concept and the algorithms for checking the consistency and the correctness of the process structure.}, subject = {Baubetrieb}, language = {de} } @article{Abdalla2004, author = {Abdalla, Jamal}, title = {Elements of an Agent-based Mediative Communication Protocol for Design Objects}, doi = {10.25643/bauhaus-universitaet.220}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2207}, year = {2004}, abstract = {Integrated structural engineering system usually consists of large number of design objects that may be distributed across different platforms. These design objects need to communicate data and information among each other. For efficient communication among design objects a common communication protocol need to be defined. This paper presents the elements of a communication protocol that uses a mediator agent to facilitate communication among design objects. This protocol is termed the Mediative Communication Protocol (MCP). The protocol uses certain design communication performatives and the semantics of an Agent Communication language (ACL) mainly the Knowledge and Query Manipulation Language (KQML) to implement its steps. Details of a Mediator Agent, that will facilitate the communication among design objects, is presented. The Unified Modeling Language (UML) is used to present the Meditative protocol and show how the mediator agent can be use to execute the steps of the meditative communication protocol. An example from structural engineering application is presented to demonstrate and validate the protocol. It is concluded that the meditative protocol is a viable protocol to facilitate object-to-object communication and also has potential to facilitate communication among the different project participants at the higher level of integrated structural engineering systems.}, subject = {Mehragentensystem}, language = {en} } @article{GaoWuRen2004, author = {Gao, Zuoren and Wu, Weiyu and Ren, Aizhu}, title = {Physically Based Modeling and Multi-Physical Simulation System for Wood Structure Fire Performance}, doi = {10.25643/bauhaus-universitaet.238}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2381}, year = {2004}, abstract = {This research is devoted to promoting the performance-based engineering in wood structure fire. It looks into the characteristic of the material, structural composing and collapse detecting to find out the main factors in the wood structure collapse in fire. The aim of the research is to provide an automatic simulation platform for the complicated circulation. A physically based model for slim member for beams and columns and a frame of multi-physical simulation are provided to implement the system. The physically based model contains material model, structural mechanics model, material mechanics model, as well as geometry model for the compositive simulation. The multi-physical simulation is built on the model and has the capacity to carry out a simulation combining structural, fire (thermal, CFD) and material degradation simulation. The structural and fire simulation rely on two sophisticated software respectively, ANSYS (an FEA software) and FDS (with a core of CFD). Researchers of the paper develop system by themselves to combine the two existing ones. The system has the capability to calculate the wood char to find out the loss of cross-section and to detect the collapse caused in different ways. The paper gives a sample of Chinese traditional house to show how this simulation system works.}, subject = {Produktmodell}, language = {en} } @inproceedings{Suzuki2004, author = {Suzuki, Aketo}, title = {Numerical Analysis for Prediction as to Influence of Digging a Tunnel on Groundwater}, doi = {10.25643/bauhaus-universitaet.113}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1133}, year = {2004}, abstract = {This paper describes monitoring of the in-valley discharge and underground water level at the place where the tunnel will be constructed and also, the numerical analysis for prediction applying the Tank Model and Linear Filter Method to calculate the prediction. The application of these analyses has actually allowed the change of underground water level to be grasped and more effective information system to be established by comparing the real-time monitoring data with the real-time calculation of prediction.}, subject = {Mobile Computing}, language = {en} } @inproceedings{XieIssaO'Brien2004, author = {Xie, Haiyan and Issa, Raja and O'Brien, William}, title = {Structure of a Formal User Model for Construction Information Retrieval}, doi = {10.25643/bauhaus-universitaet.129}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1296}, year = {2004}, abstract = {Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction.}, subject = {Bauwerk}, language = {en} } @article{TakagiTaniKawamura2004, author = {Takagi, Kousuke and Tani, Akinori and Kawamura, Hiroshi}, title = {Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces}, doi = {10.25643/bauhaus-universitaet.223}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2238}, year = {2004}, abstract = {Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified.}, subject = {Mehragentensystem}, language = {en} } @article{WillenbacherHuebler2004, author = {Willenbacher, Heiko and H{\"u}bler, Reinhard}, title = {Intelligent Link-Management for the Support of Integration in Building Life Cycle}, doi = {10.25643/bauhaus-universitaet.222}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2223}, year = {2004}, abstract = {The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its "intelligent" link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants.}, subject = {Mehragentensystem}, language = {en} } @inproceedings{MilesCenTaylor2004, author = {Miles, John and Cen, Mei and Taylor, Mark}, title = {Linking Sketching and Constraint Checking for Early Conceptual Design}, doi = {10.25643/bauhaus-universitaet.1548}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1547}, year = {2004}, abstract = {At the start of the conceptual design process, designers start to give tangible form to their thoughts by sketching. This helps with reasoning and communicates ideas to other members of the team. Sketches are gradually worked up into more formal drawings which are then passed to the other stages of the design process. There are however some problems with basing early ideas on sketching. For example, due to their ad-hoc nature, sketches tend only to be diagrammatic representations and so designers cannot be sure that their ideas are feasible and what is being proposed meets the constraints described in the client brief. This can result in designers wasting time working up ideas which prove to be unsuitable. Also the process of constraint checking is complex and time consuming and so designers tend limit their search of possible options and instead choose satisfying rather than good solutions. This paper describes the INTEGRA project which examines the role of sketching in early conceptual design and how this can be linked to other aspects of the process and particularly automated constraint checking using an IT based approach. The focus for the work is the design of framed buildings. A multi-disciplinary approach has been adopted and the work has been undertaken in close collaboration with practising designers and clients.}, subject = {Konzipieren }, language = {en} } @article{MotawaAnumbaElHamalawi2004, author = {Motawa, Ibrahim and Anumba, Chimay and El-Hamalawi, A.}, title = {Development of a Fuzzy System for Change Prediction in Construction Projects}, doi = {10.25643/bauhaus-universitaet.218}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2180}, year = {2004}, abstract = {Change management has been the focus of different IT systems. These IT systems were developed to represent design information, record design rationale, facilitate design coordination and changes. They are largely based on managing reactive changes, particularly design changes, in which changes are recorded and then propagated to the relevant project members. However, proactive changes are hardly dealt with in IT systems. Proactive changes require estimating the likelihood of occurrence of a change event as well as estimating the degree of change impacts on project parameters. Changes in construction projects often result from the uncertainty associated with the imprecise and vague knowledge of much project information at the early stages of projects. This is a major outcome of the case studies carried out as part of this research. Therefore, the proposed model considers that incomplete knowledge and certain project characteristics are always behind change causes. For proactive changes, predicting a change event is the main task for modelling. The prediction model should strive to integrate these main elements: 1) project characteristics that lead to change 2) causes of change, 3) the likelihood of change occurrence, and 4) the change consequences. It should also define the dependency relationships between these elements. However, limited data (documented) are only available from previous projects for change cases and many of the above elements can only be expressed in linguistic terms. This means that the model will simulate the uncertainty and subjectivity associated with these sets of elements. Therefore, a fuzzy model is proposed in this research to capture these elements. The model analyses the impact of each set of elements on the other by assigning fuzzy values for these elements that express the uncertainty and subjectivity of their impact. The main aim is to predict change events and evaluate change effects on project parameters. The fuzzy model described above was developed in an IT system for operational purposes and was designed as a Java package of components with their supporting classes, beans, and files. This paper describes the development and the architecture of the proposed IT system to achieve these requirements. The system is intended to help project teams in dealing with change causes and then the change consequences in construction projects.}, subject = {Mehragentensystem}, language = {en} } @inproceedings{MilesJoitaBurnap2004, author = {Miles, John and Joita, Liviu and Burnap, Peter}, title = {Collaborative Engineering: Virtual Teams in a Grid Environment Supporting Consortia in the Construction Industry}, doi = {10.25643/bauhaus-universitaet.136}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1362}, year = {2004}, abstract = {In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI).}, subject = {Ingenieurbau}, language = {en} } @inproceedings{Palm2004, author = {Palm, Johan}, title = {Integrated Engineering Workflow focused on the Structural Engineering in the Industrial Environment}, doi = {10.25643/bauhaus-universitaet.162}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1625}, year = {2004}, abstract = {The engineering and construction industry has been slow to exploit the full potential of information technology. The industry is highly fragmented, price sensitive, risk-adverse, and profit margins are small. Each project is unique with a small amount of technological innovation opportunities to capitalise on from one project to the next. Technological innovations that have been taking place are just simulating the old traditional paper workflow. Engineering information in digital form is being conveyed using traditional paper representations, which have to be interpreted by humans before the information can be used in other applications, thereby creating 'islands of information'. It can be seen that poorly implemented IT strategies are duplicating paperwork, rather than reducing or eliminating it (Crowley et al., 2000). This paper will introduce the Integrated Engineering Workflow (IEW) concept to re-organise a structural discipline working on multi-disciplinary projects so as to maximise the advantages offered by new information technology.}, subject = {Baubetrieb}, language = {en} } @inproceedings{Olivier2004, author = {Olivier, A. H.}, title = {An application-centred framework for distributed engineering applications}, doi = {10.25643/bauhaus-universitaet.135}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1353}, year = {2004}, abstract = {The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality.}, subject = {Ingenieurbau}, language = {en} } @article{YabukiYoshimura2004, author = {Yabuki, Nobuyoshi and Yoshimura, Yutaka}, title = {An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps}, doi = {10.25643/bauhaus-universitaet.256}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2564}, year = {2004}, abstract = {This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations.}, subject = {Wissensmanagement}, language = {en} } @inproceedings{CheungNoruziaanLi2004, author = {Cheung, Moe M. S. and Noruziaan, Bahman and Li, W. C.}, title = {Data acquisition, processing and management systems for a Canadian bridge monitoring project}, doi = {10.25643/bauhaus-universitaet.123}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1235}, year = {2004}, abstract = {This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials.}, subject = {Bauwerk}, language = {en} } @inproceedings{ChouHsieh2004, author = {Chou, Yu-Hur and Hsieh, Shang-Hsien}, title = {Design of Partial Scoring Assessment System for Reinforcement Concrete Design Course : Development of Partial Scoring Assessment System for Reinforcement Concrete Design Course}, doi = {10.25643/bauhaus-universitaet.90}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-905}, year = {2004}, abstract = {In the field of Civil Engineering, the content of reinforcement concrete design course (RC course) has complicated design procedures and many difficult specifications to recognize, so most of the students regard the RC course a tough course, and teachers very often find the class time insufficient. Also, teachers of the RC course usually spend a lot of time in organizing the examinations for handling tedious calculations and complicated logical reasoning. Furthermore, correcting examination papers with partial scoring takes even more time of the teacher's. Therefore, the objective of this research is to design and develop a partial scoring assessment system to meet the needs in engineering design courses, such as the RC course. This assessment system can generate test items with variable parameters. It also supports inference diagnosis on the examinee's misconceptions and gives partial scores in grading the examination. In this research, the example test subject is the analysis of rectangular reinforced concrete beam with single layer steel bars.}, subject = {Bautechnik}, language = {en} } @inproceedings{BuergyGarrett2004, author = {B{\"u}rgy, Christian and Garrett, James H.}, title = {Supporting Domain Experts in Determining Viable User Interface Designs for Wearable Computers Used in AEC Work Situations}, doi = {10.25643/bauhaus-universitaet.116}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1168}, year = {2004}, abstract = {The design of mobile IT systems, especially the design of wearable computer systems, is a complex task that requires computer science knowledge, such as that related to hardware configuration and software development, in addition to knowledge of the domain in which the system is intended to be used. Particularly in the AEC sector, it is necessary that the support from mobile information technology fit the work situation at hand. Ideally, the domain expert alone can adjust the wearable computer system to achieve this fit without having to consult IT experts. In this paper, we describe a model that helps in transferring existing design knowledge from non-AEC domains to new projects in the construction area. The base for this is a model and a methodology that describes the usage scenarios of said computer systems in an application-neutral and domain-independent way. Thus, the actual design information and experience will be transferable between different applications and domains.}, subject = {Mobile Computing}, language = {en} }