@misc{Almasi,
  type      = {Master Thesis},
  author    = {Almasi, Ashkan},
  title     = {Stochastic Analysis of Interfacial Effects on the Polymeric Nanocomposites},
  doi       = {10.25643/bauhaus-universitaet.2433},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150709-24339},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {The polymeric clay nanocomposites are a new class of materials of which recently have become the centre of attention due to their superior mechanical and physical properties. Several studies have been performed on the mechanical characterisation of these nanocomposites; however most of those studies have neglected the effect of the interfacial region between the clays and the matrix despite of its significant influence on the mechanical performance of the nanocomposites. There are different analytical methods to calculate the overall elastic material properties of the composites. In this study we use the Mori-Tanaka method to determine the overall stiffness of the composites for simple inclusion geometries of cylinder and sphere. Furthermore, the effect of interphase layer on the overall properties of composites is calculated. Here, we intend to get ounds for the effective mechanical properties to compare with the analytical results. Hence, we use linear displacement boundary conditions (LD) and uniform traction boundary conditions (UT) accordingly. Finally, the analytical results are compared with numerical results and they are in a good agreement. The next focus of this dissertation is a computational approach with a hierarchical multiscale method on the mesoscopic level. In other words, in this study we use the stochastic analysis and computational homogenization method to analyse the effect of thickness and stiffness of the interfacial region on the overall elastic properties of the clay/epoxy nanocomposites. The results show that the increase in interphase thickness, reduces the stiffness of the clay/epoxy naocomposites and this decrease becomes significant in higher clay contents. The results of the sensitivity analysis prove that the stiffness of the interphase layer has more significant effect on the final stiffness of nanocomposites. We also validate the results with the available experimental results from the literature which show good agreement.},
  language  = {en}
}
@misc{Habtemariam,
  type      = {Master Thesis},
  author    = {Habtemariam, Abinet Kifle},
  title     = {Numerical Demolition Analysis of a Slender Guyed Antenna Mast},
  doi       = {10.25643/bauhaus-universitaet.4460},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210723-44609},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {75},
  abstract  = {The main purpose of the thesis is to ensure the safe demolition of old guyed antenna masts that are located in different parts of Germany. The major problem in demolition of this masts is the falling down of the masts in unexpected direction because of buckling problem. The objective of this thesis is development of a numerical models using finite element method (FEM) and assuring a controlled collapse by coming up with different time setups for the detonation of explosives which are responsible for cutting down the cables. The result of this thesis will avoid unexpected outcomes during the demolition processes and prevent risk of collapsing of the mast over near by structures.},
  subject      = {Abbruch},
  language  = {en}
}
@misc{Herrmann,
  type      = {Master Thesis},
  author    = {Herrmann, Annemarie},
  title     = {Investigation of buckling behavior of carbon fiber-reinforced composite shell structures with openings},
  doi       = {10.25643/bauhaus-universitaet.1812},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130107-18129},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {79},
  abstract  = {Thin-walled cylindrical composite shell structures are often applied in aerospace for lighter and cheaper launcher transport system. These structures exhibit sensitivity to geometrical imperfection and are prone to buckling under axial compression. Today the design is based on NASA guidelines from the 1960's [1] using a conservative lower bound curve embodying many experimental results of that time. It is well known that the advantages and different characteristics of composites as well as the evolution of manufacturing standards are not considered apporopriately in this outdated approach. The DESICOS project was initiated to provide new design guidelines regarding all the advantages of composites and allow further weight reduction of space structures by guaranteeing a more precise and robust design. Therefore it is necessary among other things to understand how a cutout with different dimensions affects the buckling load of a thin-walled cylindrical shell structure in combination with initial geometric imperfections. This work is intended to identify a ratio between the cutout characteristic dimension (in this case the cutout diameter) and the structure characteristic dimension (in this case the cylinder radius) that can be used to tell if the buckling structure is dominated by initial imperfections or is dominated by the cutout.},
  subject      = {buckling},
  language  = {en}
}
@misc{Udrea,
  type      = {Master Thesis},
  author    = {Udrea, Mihai-Andrei},
  title     = {Assessment of Data from Dynamic Bridge Monitoring},
  doi       = {10.25643/bauhaus-universitaet.2174},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140429-21742},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {The focus of the thesis is to process measurements acquired from a continuous monitoring system at a railway bridge. Temperature, strain and ambient vibration records are analysed and two main directions of investigation are pursued. The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is studied and correlated to environmental and operational factors. The second aspect deals with the structural response to passing trains. Corresponding triggered records of strain and temperature are processed and their assessment is accomplished using the average strains induced by each train as the reference parameter. Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out.},
  subject      = {Messtechnik},
  language  = {en}
}
@misc{Zafar,
  type      = {Master Thesis},
  author    = {Zafar, Usman},
  title     = {Probabilistic Reliability Analysis of Wind Turbines},
  doi       = {10.25643/bauhaus-universitaet.3977},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-39773},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {Renewable energy use is on the rise and these alternative resources of energy can help combat with the climate change. Around 80\% of the world's electricity comes from coal and petroleum however, the renewables are the fastest growing source of energy in the world. Solar, wind, hydro, geothermal and biogas are the most common forms of renewable energy. Among them, wind energy is emerging as a reliable and large-scaled source of power production. The recent research and confidence in the performance has led to the construction of more and bigger wind turbines around the world. As wind turbines are getting bigger, a concern regarding their safety is also in discussion. Wind turbines are expensive machinery to construct and the enormous capital investment is one of the main reasons, why many countries are unable to adopt to the wind energy. Generally, a reliable wind turbine will result in better performance and assist in minimizing the cost of operation. If a wind turbine fails, it's a loss of investment and can be harmful for the surrounding habitat. This thesis aims towards estimating the reliability of an offshore wind turbine. A model of Jacket type offshore wind turbine is prepared by using finite element software package ABAQUS and is compared with the structural failure criteria of the wind turbine tower. UQLab, which is a general uncertainty quantification framework developed at ETH Z{\"u}rich, is used for the reliability analysis. Several probabilistic methods are included in the framework of UQLab, which include Monte Carlo, First Order Reliability Analysis and Adaptive Kriging Monte Carlo simulation. This reliability study is performed only for the structural failure of the wind turbine but it can be extended to many other forms of failures e.g. reliability for power production, or reliability for different component failures etc. It's a useful tool that can be utilized to estimate the reliability of future wind turbines, that could result in more safer and better performance of wind turbines.},
  subject      = {Windturbine},
  language  = {en}
}