@article{Dudek1997, author = {Dudek, Mariusz}, title = {Zur Bewertung der Struktur von Verkehrsnetzen}, doi = {10.25643/bauhaus-universitaet.463}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4634}, year = {1997}, abstract = {In diese Ver{\"o}ffentlichung werden die Kennziffern dargestellt, die zur Beurteilung der Struktur von Verkehrsnetzen behilflich sein k{\"o}nnen. Zu diesem Zweck wurde die Graphentheorie angewendet. Eine erste Gruppe von Bewertungen st{\"u}tzt sich auf die Anzahl der Knoten und B{\"o}gen des Netzes. Detailliertere Informationen {\"u}ber Engp{\"a}sse oder Schwachstellen im Verkehrsnetz erh{\"a}lt man durch die Analyse der Kantenzusammenhangs. Die Unabh{\"a}ngigkeit der einzelnen Verkehrsarten , ihre Bewertung und Maßnahmen, sie zu verbessern werden vorgeschlagen und diskutiert. Weiteren Untersuchungen werden angeregt.}, subject = {Verkehrsnetz}, language = {de} } @article{Krzizek1997, author = {Krzizek, H.}, title = {Zur bauingenieurgerechten Speicherung von Entwurfspl{\"a}nen des konstruktiven Ingenieurbaues in Datenbanken}, doi = {10.25643/bauhaus-universitaet.485}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4850}, year = {1997}, abstract = {Es wird gezeigt, daß im allgemeinen die Zeichnungsinhalte von Entwurfspl{\"a}nen im konstruktiven Ingenieurbau in Teilzeichnungen zerlegt werden k{\"o}nnen, denen fachspezifische Objekte des Bauwesen entsprechen. Solche Objekte sind beispiels- weise Querschnitte, Tr{\"a}ger, St{\"u}tzen und Fundamente. Diese Teilobjekte werden durch eine unterschiedliche Anzahl von Parametern festgelegt werden. W{\"a}hlt man f{\"u}r diese Parameter die entsprechendnen Fachbegriffe, so hat man durch diese die M{\"o}glichkeit die Teilobjekte auch in Datenbanken zu speichern. Neben den Sachparametern m{\"u}ssen auch zeichnungs- technische Werte, wie Maßstab, gew{\"a}hlte L{\"a}ngeneinheiten (m,cm..) und Einsatzpunkt - f{\"u}r die Lage des Teilobjektes im Gesamtplan - gespeichert werden. Zeichenmodule f{\"u}r jedes Teilobjekt k{\"o}nnen dann bei Aufruf eines bestimmten Planes aus den Daten der Datenbank die Teilzeichnungen generieren, sodaß eine Planspeicherung in der {\"u}bliche Speicherform (Speicherelemente Punkt, Linie usw.) nicht mehr erforderlich ist. Neben der reinen Darstellung k{\"o}nnen die Programmodule auch dahingehend erweitert werden, daß auch die zugeh{\"o}rigen Berechnungen durchgef{\"u}hrt werden. Die numerischen Ergebnisse wie auch die Eingabewerte werden in einem alfanumerischen Dokument abgelegt. Damit ergibt sich dann ein Konstruktionsystem f{\"u}r den Entwurf, das insbesondere die Berechnung von Varianten sehr erleichertert. In Sonderf{\"a}llen k{\"o}nnen auch die Pl{\"a}ne in ein Standard CAD Programm eingelesen werden, um allf{\"a}llige Besonderheiten interaktiv zu erg{\"a}nzen. Das relationale Modell wird weiters vorgestellt, nach dem die Zeichnungsinhalte gespeichert werden. Neben reinen Teilobjekts{\"a}tzen werden auch Tabellens{\"a}tze verwendet, um unter einem Namen mehrere numersiche Daten verwalten zu k{\"o}nnen. Es werden auch sogenannte Fort- setzungss{\"a}tze besprochen, die in Entsprechung der stark unterschiedlichen Anzahl der Objektattibute verwendet werden.}, subject = {Ingenieurbau}, language = {de} } @article{DonathPetzold1997, author = {Donath, Dirk and Petzold, Frank}, title = {Zuk{\"u}nftige Techniken f{\"u}r eine computergest{\"u}tzte Planungspraxis - applikative Tools f{\"u}r die architektonische Bestandserfassung}, doi = {10.25643/bauhaus-universitaet.496}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4962}, year = {1997}, abstract = {Der Beitrag beschreibt die Entwicklung eines Softwaresystems zur strukturierten Erfassung und Verwaltung bestehender Geb{\"a}ude in der Architektur. Die Erfassung erfolgt durch die Aufnahme von geometrischen Daten und Sachdaten in unterschiedlichen Abstraktionsstufen unter Einbeziehung einer vorangehenden Dekomposition. Basis f{\"u}r die Entwicklung eines solchen Systems ist die Analyse und Systematik der Erfassungstechniken, -abl{\"a}ufe und der Gegenstand der architektonischen Bestandsaufnahme. Parallel hierzu erfolgt die Bewertung und Nutzung aktueller Techniken und Werkzeuge der applikativen Informatik. Schwerpunkte der Forschungsarbeit sind die Ableitung einer allgemeinen Geb{\"a}ude- und Bauteilstruktur, die Einbeziehung aktueller informationstechnischer Verfahren und Werkzeuge und die Entwicklung eines entsprechenden Experimentalsystems. Auf eine Auswahl softwaretechnischer Entwicklungen wird n{\"a}her eingegangen (objektspezifische Eigenschaften, flexible Geometrieerfassung und Benutzeroberfl{\"a}chen).}, subject = {Bauaufnahme}, language = {de} } @article{CerovsekTurk2004, author = {Cerovsek, Tomo and Turk, Ziga}, title = {Working Together: ICT Infrastructures to Support Collaboration}, doi = {10.25643/bauhaus-universitaet.205}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2055}, year = {2004}, abstract = {The paper summarizes a part of research carried out in ICCI project and provides a current review of ICT infrastructures supporting collaboration. It covers taxonomies, protocols, standards, components, typical subsystems as well as future trends and recommendation for two most important technologies with applications in AEC: (1) EIP (Enterprise information portal) - a single gateway to a company's information, knowledge base, and applications for all actors; (2) RTC (Real-Time Communication and Collaboration technologies) that provide means for asynchronous communication between geographically dislocated people using ICT. Proposed future developments are: orientation towards web services - with building information models, business intelligence, personalization, AEC information retrieval, p2p workspaces and grids.}, subject = {Informationstechnik}, language = {en} } @article{HallerMenzel1997, author = {Haller, P. and Menzel, R.}, title = {Wissensbasierte Tragwerksplanung im Ingenieurholzbau mit ICAD}, doi = {10.25643/bauhaus-universitaet.497}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4976}, year = {1997}, abstract = {Der Entwurf einfacher Konstruktionen stellt f{\"u}r den Tragwerksplaner zumeist eine Routineaufgabe dar. {\"U}blicherweise werden Statik, Zeichnungen sowie Elementelisten separat voneinander erstellt. Das Programmsystem ICAD bietet die M{\"o}glichkeit, diese Arbeiten in einer Bearbeitungsstufe durchzuf{\"u}hren. Die Programmierung der Bemessung, Darstellung und Auswertung von Bauteilen wird mit dem Editor Emacs vorgenommen, die grafische Umsetzung des compilierten Quelltextes erfolgt im ICAD-Browser. Innerhalb dieser Benutzeroberfl{\"a}che steht eine Reihe von Werkzeugen f{\"u}r die Eingabe und Visualisierung von Daten zur Verf{\"u}gung. Betrachtet man die zu bearbeitenden Bauteile und Anschl{\"u}sse als bekannte Konstruktionen des Ingenieurholzbaus, f{\"u}r die es eine festgelegte Anzahl von Abmessungen und Kennwerten gibt, so l{\"a}ßt sich jede dieser Konstruktionen als eigenst{\"a}ndiger Modul programmieren. Der Tragwerksplaner ist somit in der Lage, aus einem Katalog an Bauteilen und Anschl{\"u}ssen die Gesamtkonstruktion zusammenzustellen. Allgemeing{\"u}ltige Kennwerte, Berechnungsverfahren und h{\"a}ufig verwendete Unterprogramme stehen modular als Wissensbasis zur Verf{\"u}gung und werden von den einzelnen Tragelementen bedarfsgerecht eingebunden. Eine weitere M{\"o}glichkeit der wissensbasierten Tragwerksplanung stellt die sogenannte Multi-Criteria-Analyse dar. Bei diesem Verfahren nimmt das Programm selbst{\"a}ndig eine Entscheidungsfindung f{\"u}r eine oder mehrere g{\"u}nstige Konstruktionsl{\"o}sungen vor. Dazu sind lediglich Wichtungen verschiedener Randbedingungen durch den Anwender erforderlich.}, subject = {Ingenieurholzbau}, language = {de} } @article{Steinhage1997, author = {Steinhage, V.}, title = {Wissensbasierte Mustererkennung zur Erfassung von Baupl{\"a}nen}, doi = {10.25643/bauhaus-universitaet.488}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4881}, year = {1997}, abstract = {Due to technological progress and European standardization (e.g. ISO certification) there is an increasing demand to automate the digital recording of building plans. Currently there are two approaches available: (1) labour-intensive redrawing with digitizing tablets or by screen digitizing, (2) automatic scanning and vectorizing where vectorization generally demands an interactive follow-up treatment due to incomplete or ambigues results. This paper proposes a knowledge-based approach for building plan analysis. The procedure reveals the following processing steps: scanning of the building plan, enhancing the image quality and binarization, extraction of lines, line junctions and character fields, knowledge-based interpretation and grouping of image features to domain specific feature aggregates like door symbols, stair symbols etc., optical character recognition and lexicon-based interpretation of character fields, matching of feature aggregates with dimension sets. First results of a prototype implementation are presented. At last an extension of the approach towards a semantic modeling concept showing a coupling between 3D object modeling and an explict 2D modeling of images and technical drawings is presented}, subject = {Bauzeichnung}, language = {de} } @article{KaapkeMilbradt2004, author = {Kaapke, Kai and Milbradt, Peter}, title = {Voronoi-based finite volume method for transport problems}, doi = {10.25643/bauhaus-universitaet.255}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2558}, year = {2004}, abstract = {Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples.}, subject = {Finite-Elemente-Methode}, language = {en} } @article{SteinmannHuebler1997, author = {Steinmann, Frank and H{\"u}bler, Reinhard}, title = {Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme}, doi = {10.25643/bauhaus-universitaet.456}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4568}, year = {1997}, abstract = {F{\"u}r die Gestaltung einer durchg{\"a}ngigen Unterst{\"u}tzung des Entwurfsprozesses stehen gegenw{\"a}rtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repr{\"a}sentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen ber{\"u}cksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. F{\"u}r ein echtes CADesign bildet dessen Kl{\"a}rung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise {\"a}hnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivit{\"a}ten ergeben sich f{\"u}r: die Systematisierung computergest{\"u}tzter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsf{\"a}higen UNDO- bzw. TMS-Mechanismen.}, subject = {CAD}, language = {de} } @article{SemenovAlekseevaTarlapan2004, author = {Semenov, Vitaly and Alekseeva, Elena and Tarlapan, Oleg}, title = {Virtual Construction using Map-based Approach}, doi = {10.25643/bauhaus-universitaet.244}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2447}, year = {2004}, abstract = {The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility...}, subject = {Produktmodell}, language = {en} } @article{IlievaPahl1997, author = {Ilieva, D. and Pahl, Peter Jan}, title = {Verteilte Bearbeitung von Zeichnungen im Bauwesen}, doi = {10.25643/bauhaus-universitaet.486}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4860}, year = {1997}, abstract = {Eine Bauunterlage ist in der Regel an mehreren Orten vorhanden. Sie wird von verschiedenen Personen an verschiedenen Orten zu verschiedenen Zeitpunkten ge{\"a}ndert. Die {\"A}nderungen sind h{\"a}ufig und in vielen F{\"a}llen von geringem Umfang. Die Verteilung solcher Unterlagen in Computernetzen, sowie die Durchf{\"u}hrung und die Verwaltung von {\"A}nderungen stellen hohe Anforderungen an die Informations- und Kommunikationstechnik. Insbesondere ist die Konsistenz der Unterlagen unter Ber{\"u}cksichtigung der typischen Merkmale des Arbeitsablaufes im Bauwesen zu sichern. Im Vortrag wird ein Konzept f{\"u}r die Bearbeitung von Bauunterlagen, insbesondere f{\"u}r Zeichnungen, in Computernetzen vorgestellt. Grundlage dieses Konzeptes ist die Norm ISO 10303 STEP (The standard for exchange of product model data). Das AP 201 >Explicit draughting< der ISO 10303 wurde als Austauschformat f{\"u}r Zeichnungen festgelegt. Im Rahmen des Vortrages wird ein Projektmodell vorgestellt. Das Projektmodell bildet den Informationsfluß w{\"a}hrend des Bauprozesses ab und erm{\"o}glicht die Sicherung der Konsistenz einer Zeichnung w{\"a}hrend der Bearbeitung der verschiedenen Fachleute. Bei {\"A}nderung einer Zeichnung wird ausschließlich die Differenzmenge als Information {\"u}bertragen. Da die Arbeitsweise des Ingenieurs im Bauwesen eine Vollauthomatisierung des Datenaustausches nicht zul{\"a}ßt, werden {\"A}nderungen nur nach Entscheidung des zust{\"a}ndigen Fachmanns in die urspr{\"u}ngliche Fassung der Zeichnung {\"u}bernommen. Werkzeuge f{\"u}r die Unterst{\"u}tzung der Aufl{\"o}sung von Widerspr{\"u}chen in einem Dokument werden vorgestellt.}, subject = {Bauzeichnung}, language = {de} } @article{KatranuschkovGehreScherer2004, author = {Katranuschkov, Peter and Gehre, Alexander and Scherer, Raimar J.}, title = {User Requirements Capture in Distributed Project Environments: A Process-centred Approach}, doi = {10.25643/bauhaus-universitaet.202}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2029}, year = {2004}, abstract = {Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives.}, subject = {Informationstechnik}, language = {en} } @article{GanevMarinov1997, author = {Ganev, T. and Marinov, M.}, title = {Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency}, doi = {10.25643/bauhaus-universitaet.537}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5375}, year = {1997}, abstract = {Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed.}, subject = {Platte}, language = {en} } @article{AzizAnumbaMiles2004, author = {Aziz, Zeeshan and Anumba, Chimay and Miles, John}, title = {Towards a Semantic Grid Computing Platform for Disaster Management in Built Environment}, doi = {10.25643/bauhaus-universitaet.208}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2084}, year = {2004}, abstract = {Current disaster management procedures rely primarily on heuristics which result in their strategies being very cautious and sub-optimum in terms of saving life, minimising damage and returning the building to its normal function. Also effective disaster management demands decentralized, dynamic, flexible, short term and across domain resource sharing, which is not well supported by existing distributing computing infrastructres. The paper proposes a conceptual framework for emergency management in the built environment, using Semantic Grid as an integrating platform for different technologies. The framework supports a distributed network of specialists in built environment, including structural engineers, building technologists, decision analysts etc. It brings together the necessary technology threads, including the Semantic Web (to provide a framework for shared definitions of terms, resources and relationships), Web Services (to provide dynamic discovery and integration) and Grid Computing (for enhanced computational power, high speed access, collaboration and security control) to support rapid formation of virtual teams for disaster management. The proposed framework also make an extensive use of modelling and simulation (both numerical and using visualisations), data mining (to find resources in legacy data sets) and visualisation. It also include a variety of hardware instruments with access to real time data. Furthermore the whole framework is centred on collaborative working by the virtual team. Although focus of this paper is on disaster management, many aspects of the discussed Grid and Visualisation technologies will be useful for any other forms of collaboration. Conclusions are drawn about the possible future impact on the built environment.}, subject = {Mehragentensystem}, language = {en} } @article{MinchTrochanowski1997, author = {Minch, M. J. and Trochanowski, A.}, title = {The numerical Modelling and Analysis of RC cracked Structures}, doi = {10.25643/bauhaus-universitaet.527}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5278}, year = {1997}, abstract = {The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown.}, subject = {Tragwerk}, language = {en} } @article{TolokTolokGomenyuk1997, author = {Tolok, V. A. and Tolok, A. V. and Gomenyuk, S. I.}, title = {The instrumental System of Mechanics Problems Analysis of the deformed Solid Body}, doi = {10.25643/bauhaus-universitaet.536}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5361}, year = {1997}, abstract = {In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics.}, subject = {Festk{\"o}rpermechanik}, language = {en} } @article{KazakevitchVolkova1997, author = {Kazakevitch, M. I. and Volkova, Viktorija}, title = {The exact Solution of the free pre-stressed Bar-Oscillations}, doi = {10.25643/bauhaus-universitaet.535}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5356}, year = {1997}, abstract = {In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force}, subject = {Bauteil}, language = {en} } @article{StrukeljSkrinar1997, author = {Strukelj, A. and Skrinar, Matjaz}, title = {The Evaluation of the Dynamical Soil-Bridge Interaction}, doi = {10.25643/bauhaus-universitaet.539}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5397}, year = {1997}, abstract = {In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1\%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts.}, subject = {Boden-Bauwerk-Wechselwirkung}, language = {en} } @article{KazakevitchKulyabkoDubichvost1997, author = {Kazakevitch, M. I. and Kulyabko, V. V. and Dubichvost, A. A.}, title = {The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads}, doi = {10.25643/bauhaus-universitaet.521}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5219}, year = {1997}, abstract = {In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.}, subject = {Verbundtragwerk}, language = {en} } @article{Volkova2004, author = {Volkova, Viktorija}, title = {The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations}, doi = {10.25643/bauhaus-universitaet.265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2656}, year = {2004}, abstract = {Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application.}, subject = {Verkehrsplanung}, language = {en} } @article{KeJianMing2004, author = {Ke, Chen and Jian Ming, Lu}, title = {Study of Analysis System for Bridge Test}, doi = {10.25643/bauhaus-universitaet.254}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2547}, year = {2004}, abstract = {Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail.}, subject = {Finite-Elemente-Methode}, language = {en} } @article{Fink2004, author = {Fink, Thomas}, title = {Structural analysis, design and detailing using standard CAD software and standard building information model}, doi = {10.25643/bauhaus-universitaet.270}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2702}, year = {2004}, abstract = {This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models.}, subject = {Bauindustrie}, language = {en} } @article{RombergNigglvanTreeck2004, author = {Romberg, Richard and Niggl, Andreas and van Treeck, Christoph}, title = {Structural Analysis based on the Product Model Standard IFC}, doi = {10.25643/bauhaus-universitaet.243}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2433}, year = {2004}, abstract = {In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example.}, subject = {Produktmodell}, language = {en} } @article{GirlichKovalevZaporozhets1997, author = {Girlich, E. and Kovalev, M. and Zaporozhets, A.}, title = {Standardization problem: Ressource Allocation in a Network}, doi = {10.25643/bauhaus-universitaet.517}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5172}, year = {1997}, abstract = {We consider the standardization problem (SP) which can be formulated as follows. It is known demand bi in each type i in {1, 2, ..., n} of items. Production of yi items of the ith type brings a profit fi (yi), where fi is a nondecreasing concave function for each i in {1, 2, ..., n}.It is necessary to satisfy the demand and to maximize the total profit provided that there exist >standardization possibilities< . These possibilities means that some types of items can be replaced by some another types. We introduce generalized standardization problem (GSP) in which titems demand is given as the set of admissible demand vectors. We show that GSP and SP are special cases of the resource allocation problem over a network polymatroid. Ibasing on this observation we propose a polynomial time solution algorithm for GSP and SP.}, subject = {Ressourcenallokation}, language = {en} } @article{SchneiderBeucke1997, author = {Schneider, Ulrich and Beucke, Karl}, title = {Standardisierung der Kommunikation als Integrationsansatz f{\"u}r das Bauwesen}, doi = {10.25643/bauhaus-universitaet.548}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5483}, year = {1997}, abstract = {Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenw{\"a}rtig die Realisierung des durchg{\"a}ngigen, fach{\"u}bergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsf{\"a}higkeit der deutschen Bauwirtschaft ist es unumg{\"a}nglich, vorhandene Effizienzpotentiale in der Bauplanung auszusch{\"o}pfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden k{\"o}nnen. Nach dem gegenw{\"a}rtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchg{\"a}ngig nutzbar sind. Diese werden in einem allgemeing{\"u}ltigen Format den speziellen Programmen der Fachplaner zur Verf{\"u}gung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu {\"u}bertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erf{\"u}llen m{\"u}ssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unver{\"a}nderter Weise erfolgen.}, subject = {Bauwesen}, language = {de} } @article{Strukelj1997, author = {Strukelj, A.}, title = {Some Problems in Obtaining the Green's Function of the Layered Soil}, doi = {10.25643/bauhaus-universitaet.538}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5388}, year = {1997}, abstract = {The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process}, subject = {Bodenmechanik}, language = {en} } @article{BucherSchorling1997, author = {Bucher, Christian and Schorling, York}, title = {SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics}, doi = {10.25643/bauhaus-universitaet.495}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4957}, year = {1997}, abstract = {Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account.}, subject = {Baustatik}, language = {en} } @article{MoellerBeerGrafetal.1997, author = {M{\"o}ller, B. and Beer, M. and Graf, W. and Hoffmann, Alfred}, title = {Sicherheitsbeurteilung von Tragwerken mit Fuzzy-Modellen}, doi = {10.25643/bauhaus-universitaet.462}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4625}, year = {1997}, abstract = {Die Sicherheit von Tragwerken h{\"a}ngt von der zuverl{\"a}ssigen Modellierung s{\"a}mtlicher Tragwerksparameter ab. {\"U}blicherweise werden diese Parameter als deterministische oder stochastische Gr{\"o}ßen beschrieben. Stochastische Gr{\"o}ßen sind Zufallsgr{\"o}ßen, die unscharfe Informationen {\"u}ber Tragwerksparameter mit Hilfe von Dichtefunktionen erfassen. Nicht alle unscharfen Tragwerksparameter lassen sich als Zufallsgr{\"o}ßen darstellen. Sie k{\"o}nnen jedoch als Fuzzy-Gr{\"o}ßen modelliert werden. Fuzzy-Gr{\"o}ßen beschreiben unscharfe Tragwerksparameter als unscharfe Menge mit Bewertungsfunktion (Zugeh{\"o}rigkeitsfunktion). Die Fuzzy-Modellierung im Bauingenieurwesen umfaßt die Fuzzifizierung, die Fuzzy-Analyse, die Defuzzifizierung und die Sicherheitsbeurteilung. Sie erlaubt es, Tragwerke mit nicht-stochastischen unscharfen Eingangsinformationen zu untersuchen. Nicht-stochastische Eingangsinformationen treten sowohl bei bestehenden als auch bei neuen Tragwerken auf. Die unscharfen Ergebnisse der Fuzzy-Modellierung gestatten es, das Systemverhalten zutreffender zu beurteilen; sie sind die Ausgangspunkte f{\"u}r eine neue Sicherheitsbeurteilung auf der Grundlage der M{\"o}glichkeitstheorie. Bei der Fuzzy-Analyse ist die alpha-Diskretisierung vorteilhaft einsetzbar. Bei fehlender Monotonie der deterministischen Berechnungen und unter Ber{\"u}cksichtigung der Nichtlinearit{\"a}t wird die Fuzzy-Analyse mit Optimierungsalgorithmen durchgef{\"u}hrt. Zwei Beispiele werden diskutiert: die L{\"o}sung eines transzendenten Eigenwertproblems und eines linearen Gleichungssystems. Die Systemantworten der Fuzzy-Analyse werden der Sicherheitsbeurteilung zugrunde gelegt. F{\"u}r ausgew{\"a}hlte physikalische Gr{\"o}ßen werden Versagensfunktionen definiert. Diese bewerten die M{\"o}glichkeit des Versagens. Mit Hilfe von Min-max-Operationen der Fuzzy-Set-Theorie erh{\"a}lt man aus Versagensfunktion und Fuzzy-Antwort die Versagensm{\"o}glichkeit bzw. die {\"U}berlebensm{\"o}glichkeit. Die ermittelte Versagensm{\"o}glichkeit repr{\"a}sentiert die subjektive Beurteilung der M{\"o}glichkeit, daß das Ereignis \&qout;Versagen\&qout; eintritt. Beispiele zeigen die Unterschiede zwischen der Sicherheitsbeurteilung mittels Fuzzy-Modells und mittels deterministischen Modells.}, subject = {Tragwerk}, language = {de} } @article{EmelichevGirlichPodkopaev1997, author = {Emelichev, V. A. and Girlich, E. and Podkopaev, D. P.}, title = {Several kinds of Stability of efficient Solutions in Vector Trajectorial discrete Optimization Problem}, doi = {10.25643/bauhaus-universitaet.503}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5030}, year = {1997}, abstract = {This work was partially supported by DAAD, Fundamental Researches Foundation of Belarus and International Soros Science Education Program We consider a vector discrete optimization problem on a system of non- empty subsets (trajectories) of a finite set. The vector criterion of the pro- blem consists partial criterias of the kinds MINSUM, MINMAX and MIN- MIN. The stability of eficient (Pareto optimal, Slater optimal and Smale op- timal) trajectories to perturbations of vector criterion parameters has been investigated. Suficient and necessary conditions of eficient trajectories local stability have been obtained. Lower evaluations of eficient trajectories sta- bility radii, and formulas in several cases, have been found for the case when l(inf) -norm is defined in the space of vector criterion parameters.}, subject = {Diskrete Optimierung}, language = {en} } @article{Dzwigon1997, author = {Dzwigon, Wieslaw}, title = {Sch{\"a}tzung der Verkehrs-Verteilung (O-D Matrix) bei der Anwendung der Verkehrsst{\"a}rkemessung in den Straßenquerschnitten}, doi = {10.25643/bauhaus-universitaet.464}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4647}, year = {1997}, abstract = {O-D Matrix sind die wichtigste Informationsquelle, die den Bedarf an Transport in der Stadt betrifft. Sie dienen den richtigen Bildung von Straßennetz und {\"O}ffentlichen Personen Verkehrslinien. Anhand diesen Grundlagen gerechnet man Verkehrsst{\"a}rken, die zur Dimensionierung der Verkehrsinfrastruktur benutzt werden. Im Verkehrsplannung zur Rechnung O-D Matrix wird Vier - Stufen - Methode angewendet. In dieser Methode verwendet man die Angaben aus den Haushaltsumfragen und aus den Kordonumfragen. Diese Methode fordert einen großen Arbeitsaufwand und Kosten. Hier wird die andere Methode dargestellt. Bei Sch{\"a}tzung der O-D Matrix verwendet man die Verkehrsst{\"a}rken, die in den Straßenquerschnitten gemessen werden. Wir brauchen gemessene Verkehrsst{\"a}rken auch f{\"u}r andere Ziele (z. B. f{\"u}r Signalsteuerung, f{\"u}r Beobachtung des Motorisierungstrendes). Darum ist diese Methode billiger als das traditionelle Verfahren. In diesen Methode haben wir zwei M{\"o}glichkeiten. Die erste - von Verkehrsst{\"a}rkemessungen kann man O-D Matrix direkt sch{\"a}tzen. Und zweite M{\"o}glichkeit - zuerst rechnen wir die Verkehrserzeugungen und sp{\"a}ter O-D Matrix. Das zweite Verfahren hat einen wesentlichen Vorteil und zwar, anhand der Verkehrserzeugungen ist es m{\"o}glich alle Elemente O-D Matrix zu rechnen. Bei der Sch{\"a}tzung der O-D Matrix unmittelbar von den Messungen (das erste Verfahren) bekommt man nur diese Elemente, die in den beobachtenen Straßenquerschnitten auftreten.}, subject = {Stadtverkehr}, language = {de} } @article{LikhitruangsilpIoannou2004, author = {Likhitruangsilp, Veerasak and Ioannou, Photios}, title = {Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating}, doi = {10.25643/bauhaus-universitaet.224}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2247}, year = {2004}, abstract = {This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor's risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor's risk preference.}, subject = {Mehragentensystem}, language = {en} } @article{TakagiTaniKawamura2004, author = {Takagi, Kousuke and Tani, Akinori and Kawamura, Hiroshi}, title = {Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces}, doi = {10.25643/bauhaus-universitaet.223}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2238}, year = {2004}, abstract = {Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified.}, subject = {Mehragentensystem}, language = {en} } @article{OsadaKoikeMorimoto2004, author = {Osada, Teppei and Koike, Hirotaka and Morimoto, Akinori}, title = {Research on Establishment of a Standard of Traffic Impact Assessment with Integrated Database System}, doi = {10.25643/bauhaus-universitaet.264}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2647}, year = {2004}, abstract = {Planning support systems, such as geographical information system (GIS) and traffic flow simulation models, are widely in use in recent urban planning research. In this paper we propose a method to apply traffic impact assessment (TIA) to large-scale, commercial developments. In TIA research we often encounter the problem of increasing amount of data that is necessary for detailed investigation and analysis, as the scale of commercial developments become larger and more complex. As a result, TIA presents two problems. The first problem is the difficulty of data acquisition. The second problem is the reliability of data. As a solution, we developed an integrated database system.}, subject = {Verkehrsplanung}, language = {en} } @article{BakurovaPerepelitsaZin'kovskaya1997, author = {Bakurova, A. V. and Perepelitsa, V. A. and Zin'kovskaya, J. S.}, title = {Research of Stability of Vector Problem of spanning Tree with topological Criteria}, doi = {10.25643/bauhaus-universitaet.515}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5159}, year = {1997}, abstract = {A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model}, subject = {Spannender Baum}, language = {en} } @article{GongHuangChen2004, author = {Gong, Dejun and Huang, Limang and Chen, Xi}, title = {Research and Application on Highway Construction Visual Management Information System based on the Network and GIS}, doi = {10.25643/bauhaus-universitaet.266}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2661}, year = {2004}, abstract = {The paper introduced the research and application of the highway construction management information integrated system. Explained the development and application of highway survey applet run on mobile telephone supporting Java and the technique of transmitting engineering data by GPRS wireless network technology. And expounded the development and application of highway engineering construction field data collecting software run on Pocket-PC. Recommended the technique of engineering long distance data transmitting based on C/S structure adopting VPN (Virtual Private Networks) technology. Especially expatiated on the research on the platform of highway construction management information integrated system adopting geography information system (GIS) technique, database technique and network technique. And said all to subsystem about bid manage, contract management, engineering design drawing, engineering survey calculation, measure and pay, data processing on engineering experiment, quantity assessing, project plan and progress, engineering document management etc. Besides? proposed highway construction project visual analysis and inquiry system based on Web-GIS; Explained the research and application of highway engineering construction OA based on B/S structure; real-time workflow and information processing such as the management of administration, business and procedure of authorization and information distribution. At last, the author described the prospect of the application of C/S and B/S structure in trade software development in the highway construction management.}, subject = {Geoinformationssystem}, language = {en} } @article{KiviniemiFischer2004, author = {Kiviniemi, Arto and Fischer, Martin}, title = {Requirements Management Interface to Building Product Models}, doi = {10.25643/bauhaus-universitaet.242}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2427}, year = {2004}, abstract = {In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...}, subject = {Produktmodell}, language = {en} } @article{Voronin1997, author = {Voronin, V. P.}, title = {Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency}, doi = {10.25643/bauhaus-universitaet.529}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5296}, year = {1997}, abstract = {Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations.}, subject = {Bauwerk}, language = {en} } @article{VenturinoRaciti1997, author = {Venturino, Ezio and Raciti, F.}, title = {Quaternion methods for random matrices in quantum physics}, doi = {10.25643/bauhaus-universitaet.502}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5029}, year = {1997}, abstract = {The theory of random matrices, or random matrix theory, RMT in what follows, has been developed at the beginning of the fties to describe the sta- tistical properties of energy levels of complex quantum systems, [1], [2], [3]. In the early eighties it has enjoyed renewed interest since it has been recognized as a very useful tool in the study of numerous physical systems. Specically, it is very useful in the analysis of chaotic quantum systems. In fact, in the last years many papers appeared about the problem of quantum chaos which implies the quantization of systems whose underlying classical dynamics is irregular (i.e. chaotic). The simplest models considered in this eld are billi- ards of various shapes. From the the classical point of view, a point particle in a 2-dimensional billiard displays regular or irregular motion depending on the shape of the billiard; for instance motion in a rectangular or circular billi- ard is regular thanks to the symmetries of the boundary. On the other hand, billiards of arbitrary shapes imply chaotic motion, i.e. exponential diver- gence of initially nearby trajectories. In order to study quantum billiards we have to consider the Schroedinger equation in various 2-dimensional domains. The eigenvalues of the Schroedinger equation represent the allowed energy levels of our quantum particle in the billiard under consideration, while the eigenfunction norms represent the probability density of nding the particle in a certain position. The question of quantum chaos is whether the charac- ter of the classical motion (regular or chaotic) can in uence some properties}, subject = {Quantenphysik}, language = {en} } @article{Routmann1997, author = {Routmann, Y. L.}, title = {Pseudorigidity method for solving the problem of limit equilibrium of rigid-plastic constructions}, doi = {10.25643/bauhaus-universitaet.544}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5447}, year = {1997}, abstract = {1.Design calculations , based upon the theory elasticity , cannot completely satisfy engineers and designers , because cannot answer to basic question about overload capability . Only design calculations of limit equilibrium of rigid-plastic constructions can answer to this question completely enough. As a rule , such design calculations are made issue from hypothesis, that material of construction has rigid-plastic diagram Prandtl .This scheme of calculation gives qualitatively more correct results, then usual calculation, based upon law Hooke's , and allows more really estimate ultimate strength of construction due to different loads. Universal algorithms for solving the problem of limit equilibrium have been created since the middle of the 60's.These algorithms are based upon two basic theorems about limit analysis - static and kinetics. It was found , that with the help of above-mentioned theorems the problem of limit equilibrium can be formulated as a problem of linear programming (for linear yield) or nonlinear programming (for yield Guber-Mizes). The method of linear programming conformably to calculation of rod systems got the most development in the reports Prager W. [1] and Chiras A. [ 2 ]. The method of linear programming conformably to plates and shells was widely used by Rganizin A.[3]. [3[ contains more full bibliography about this problem. Calculation of limit equilibrium with the help of linear and nonlinear programming has a few significant lacks: - complexity and laboriousness preliminary preparation of problem for PC; - necessity to use special program means , which are not in usual program packet for strength analysis. Author worked out a new method about design calculation of limit equilibrium without above-mentioned lacks . The method is based upon analogy of relations between internal generalized efforts and generalized deformations in elastic system and between generalized efforts and velocities of change generalized deformations in rigid-plastic system. Because later rigid-plastic deformation would be treated as an elastic deformation in the system with special constructed rigidities , this method could be called >pseudorigidity method<.}, subject = {Plastizit{\"a}tstheorie}, language = {en} } @article{Firmenich2004, author = {Firmenich, Berthold}, title = {Product Models in Network Based Co-operation in Structural Engineering}, doi = {10.25643/bauhaus-universitaet.211}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2119}, year = {2004}, abstract = {The Priority Programme 'Network Based Co-operation in Structural Engineering' of the 'German Research Foundation' (DFG) has been established in the year 2000. This paper describes and discusses the main research directions and first results of the workgroup 'Distributed Product Models'. The five projects of the workgroup have developed completely different solutions for specific application domains. Each solution concept deals with a consistent product modeling and knowledge processing in a distributed environment in the planning process. The individual solution approaches of the projects are described and the underlying basic assumptions are discussed. A unified system architecture is described for all projects of the workgroup. Two different approaches (object-oriented and graph-based models) have been introduced for product and knowledge modeling. The common structure of these models will be explained to fully understand the differences of these modeling approaches. Finally the concepts for co-operative work and conflict management in a distributed environment are described: The solution approaches will be distinguished by classifying the supported co-operation according to time. A final scientific summary describes the state-of-the-art in network based co-operation in structural engineering: The role of research directions like knowledge modeling, standard product modeling and versioning in the distributed planning process will be explained.}, subject = {Produktmodell}, language = {en} } @article{HoltzhauerSaal2004, author = {Holtzhauer, Eric and Saal, Helmut}, title = {Product modelling in the steel construction domain}, doi = {10.25643/bauhaus-universitaet.241}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2415}, year = {2004}, abstract = {The complexity of the relationships between the actors of a building project requires high efficiency in communication. Among other things, data sharing is crucial. The exchange of data is made possible by interfaces between expert programs, which rely on product models. The latter are neutral standards with formal definitions of building objects and their attributes. This paper deals with the state of the art and the research activities concerning product models in the steel construction domain and the advantages provided by this technology for the sector.}, subject = {Produktmodell}, language = {en} } @article{SmarslyHartmannRueppeletal., author = {Smarsly, Kay and Hartmann, Timo and R{\"u}ppel, Uwe and K{\"o}nig, Markus}, title = {Positionspapier des Arbeitskreis Bauinformatik}, editor = {Smarsly, Kay}, doi = {10.25643/bauhaus-universitaet.3221}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170523-32219}, pages = {5}, abstract = {Die Bauinformatik ist eine S{\"a}ule der modernen Bau- und Umweltingenieurwissenschaften und befasst sich mit der Erforschung grundlegender informatorischer Methoden sowie mit der Anwendung und Weiterentwicklung der Informationswissenschaften im Bau- und Umweltbereich. Der Arbeitskreis Bauinformatik konstituiert sich aus Wissenschaftlern, die an Universit{\"a}ten im deutschsprachigen Raum auf dem Fachgebiet Bauinformatik lehren und forschen. Ausgehend vom erreichten Entwicklungsstand der Bauinformatik skizziert dieses Positionspapier die Aufgaben des Arbeitskreises und formuliert eine Grundlage f{\"u}r eine abgestimmte Weiterentwicklung an den deutschsprachigen Universit{\"a}ten.}, subject = {Bauinformatik}, language = {de} } @article{KangMiranda2004, author = {Kang, Shihchung and Miranda, Eduardo}, title = {Physics Based Model for Simulating the Dynamics of Tower Cranes}, doi = {10.25643/bauhaus-universitaet.240}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2409}, year = {2004}, abstract = {The goal of the research is to increase the understanding of dynamic behaviors during the crane operation, and develops computer-aided methods to improve the training of crane operators. There are approximately 125,000 cranes in operation today in the construction industry, responsible for major portion of erection activities. Unfortunately, many accidents occur every year in the U.S. and other countries related to the operation of cranes in construction sites. For example on November 28, 1989 a tower crane collapse during the construction of a building in San Francisco killing four construction workers, one civilian and injuring 28. According to the statistics from Occupational Safety Health Administration (OSHA), there were 137 crane-related fatalities from 1992 to 2001 in the US. A well-known internet website that keeps track of crane-related accidents (craneaccidents.com), reports 516 accidents and 277 fatalities from 2000 to 2002. These statistics show that even though many measures have been taken to decrease the number of crane-related accidents (Braam, 2002), the number of crane related accidents is still very large. It is important to recognize that each construction related fatality is not only a great human loss but also increases the costs of insurance, lawsuits, and the construction budget due to delay of a project (Paulson 1992)...}, subject = {Produktmodell}, language = {en} } @article{GaoWuRen2004, author = {Gao, Zuoren and Wu, Weiyu and Ren, Aizhu}, title = {Physically Based Modeling and Multi-Physical Simulation System for Wood Structure Fire Performance}, doi = {10.25643/bauhaus-universitaet.238}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2381}, year = {2004}, abstract = {This research is devoted to promoting the performance-based engineering in wood structure fire. It looks into the characteristic of the material, structural composing and collapse detecting to find out the main factors in the wood structure collapse in fire. The aim of the research is to provide an automatic simulation platform for the complicated circulation. A physically based model for slim member for beams and columns and a frame of multi-physical simulation are provided to implement the system. The physically based model contains material model, structural mechanics model, material mechanics model, as well as geometry model for the compositive simulation. The multi-physical simulation is built on the model and has the capacity to carry out a simulation combining structural, fire (thermal, CFD) and material degradation simulation. The structural and fire simulation rely on two sophisticated software respectively, ANSYS (an FEA software) and FDS (with a core of CFD). Researchers of the paper develop system by themselves to combine the two existing ones. The system has the capability to calculate the wood char to find out the loss of cross-section and to detect the collapse caused in different ways. The paper gives a sample of Chinese traditional house to show how this simulation system works.}, subject = {Produktmodell}, language = {en} } @article{Kaplinski1997, author = {Kaplinski, O.}, title = {Phenomenon of inhertia in the Production Systems reliability Analysis}, doi = {10.25643/bauhaus-universitaet.532}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5320}, year = {1997}, abstract = {The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve.}, subject = {Zuverl{\"a}ssigkeitstheorie}, language = {en} } @article{Hering1997, author = {Hering, F.}, title = {Penrose-Pflasterungen in der Architektur - die k{\"u}nstlerische Umsetzung eines mathematischen Modells im Gemeindeverwaltungs-Zentrum von B{\"u}tgenbach, Belgien}, doi = {10.25643/bauhaus-universitaet.524}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5247}, year = {1997}, abstract = {Der englische Physiker und Mathematiker Roger Penrose hat eine mathematische Pflasterung entdeckt, deren Formenreichtum neue Impulse in der Architektur setzen kann. In der Gemeinde B{\"u}tgenbach im Hohen Venn, Belgien, wurde das Verwaltungszentrum durch den Essener Architekten Ernst Burghartz mit mehrereren Penrose-Pflasterungen versehen. Diese beruhen auf einem Computer-Programm, welches der Vortragende zusammen mit Dr. Frank Martini entwickelt hat. Herr Burghartz hat jedoch diesen Vorentwurf nach seinen k{\"u}nstlerischen Vorstellungen abgewandelt.}, subject = {Anwendung}, language = {de} } @article{ShihLee2004, author = {Shih, Naai-Jung and Lee, Wen-Pang}, title = {Particle Simulation and Evaluation of Personal Exposure to Contaminant Sources in an Elevation Space}, doi = {10.25643/bauhaus-universitaet.237}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2376}, year = {2004}, abstract = {An elevator, which figures a small volume, is normally used by everyone for a short period of time and equipped with simple ventilation system..Any contaminant released within it may cause serious problem. This research adapt a fire and smoke simulation software (FDS) into non-fire indoor airflow scario. Differently from previous research, particles are chosen as a risk evalution unit. A personal and multi-personal exposure model is proposed. The model takes the influence of the human thermal boundary, coughing, inhalation, exhalation, standing position, and the fan factor into account. The model is easy-to-use and suitable for the design of elevator system in practice.}, subject = {Produktmodell}, language = {en} } @article{LaemmerBurghardtMeissner1997, author = {L{\"a}mmer, Lutz and Burghardt, Michael and Meißner, Udo F.}, title = {Parallele Netzgenerierung}, doi = {10.25643/bauhaus-universitaet.531}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5315}, year = {1997}, abstract = {Bei der Berechnung von statischen oder dynamischen Problemen mit Hilfe der Methode der Finiten Elemente ist eine Diskretisierung des zu berechnenden Gebietes notwendig. Bei einer sinnvollen Modellierung des Gebietes ist die Elementgr{\"o}ße meist nicht konstant, sondern ist an kritischen Stellen kleiner. Die Vorgaben hierf{\"u}r k{\"o}nnen einerseits aus Erfahrungen des Anwenders, andererseits aus einer Fehlerabsch{\"a}tzung einer vorangegangenen FE-Berechnung resultieren [5]. Soll die FE-Berechnung auf einem Parallelrechner geschehen, ist eine Partitionierung des Gebietes, d.h. eine Zuordnung der Elemente zu den Prozessoren, notwendig. Bei dem hier beschriebenen Ansatz werden nun im Gegensatz zu den {\"u}blichen Verfahren erst die Eingangsdaten f{\"u}r den Netzgenerator umgewandelt und dann das Elementnetz direkt auf dem Parallelrecher gleichzeitig auf allen Prozessoren erzeugt. Eine Aufteilung der Elemente auf die Prozessoren entsteht als Nebenprodukt der Netzaufteilung. Die entstehenden Teilgebietsgrenzen werden geometrisch minimiert. Die Lastbalance der Netzaufteilung sowie der FE-Rechnung wird durch ein ann{\"a}hernd gleiche Anzahl der Elemente je Partition gew{\"a}hrleistet. Als Eingabedaten wird eine Beschreibung des Gebietes durch Polygonz{\"u}ge, sowie einer Netzdichtefunktion, z.B. durch Punkte mit Angaben {\"u}ber die angestrebte Elementgr{\"o}ße, ben{\"o}tigt.}, subject = {Finite-Elemente-Methode}, language = {de} } @article{ZhakSidorenko1997, author = {Zhak, S. V. and Sidorenko, V. S.}, title = {Optimized Models of Modes Choice for Displacement of technical Systems Objects}, doi = {10.25643/bauhaus-universitaet.534}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5347}, year = {1997}, abstract = {The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.}, subject = {Modellierung}, language = {en} } @article{VogelBreitMaerki2004, author = {Vogel, Manfred and Breit, Manfred and M{\"a}rki, Fabian}, title = {Optimization of 4D Process Planning using Genetic Algorithms}, doi = {10.25643/bauhaus-universitaet.236}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2360}, year = {2004}, abstract = {The presented work focuses on the presentation of a discrete event simulator which can be used for automated sequencing and optimization of building processes. The sequencing is based on the commonly used component-activity-resource relations taking structural and process constraints into account. For the optimization a genetic algorithm approach was developed, implemented and successfully applied to several real life steel constructions. In this contribution we discuss the application of the discrete event simulator including its optimization capabilities on a 4D process model of a steel structure of an automobile recycling facility.}, subject = {Produktmodell}, language = {en} } @article{Kaehler1997, author = {K{\"a}hler, Uwe}, title = {On the solution of spatial generalizations of Beltrami equations}, doi = {10.25643/bauhaus-universitaet.501}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5018}, year = {1997}, abstract = {With the help of functional analytical methods complex analysis is a powerful tool in treating non-linear first-order partial differential equations in the plane. Some of the most important of these equations are the Beltrami equations. This is due to the fact that the theory of Beltrami systems is related to many problems of geometry and analysis, like non-linear subsonic two-dimensional hydrodynamics, problems of conformal and quasiconformal mappings of two-dimensional Riemannian manifolds, or complex analytic dynamics. The theory of Beltrami equations is strongly connected with the -operator. This singular integral operator is immediately recognized as two-dimensional Hilbert-transform, known also under the name of integral operator with Beurling kernel, acting as an isometry of L2(C) onto L2(C). In hypercomplex function theory the Beltrami equations have not yet this importance, but nevertheless, they are a basic condition for the transfer of complex methods and efforts for solving partial differential equations, especially of non-linear type, to the spatial case. Here we deal with hypercomplex Beltrami systems. For this we restrict ourselves to the quaternionic case, but without any loss of generality. We will show how a spatial generalization of the complex -operator can be used to solve systems of non-linear partial differential equations, in particular different types of spatial Beltrami systems. Also, the for practical purposes so important norm estimates will be derived. Some of our results are stronger as known results in the complex case, but they are applicable in the complex situation, too.}, language = {en} }