@article{NguyenXuanNguyenBordasetal., author = {Nguyen-Xuan, Hung and Nguyen, Hiep Vinh and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon and Duflot, Marc}, title = {A cell-based smoothed finite element method for three dimensional solid structures}, series = {KSCE Journal of Civil Engineering}, journal = {KSCE Journal of Civil Engineering}, doi = {10.1007/s12205-012-1515-7}, pages = {1230 -- 1242}, abstract = {This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation.}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoWangJiangetal., author = {Zhao, Jun-Hua and Wang, L. and Jiang, Jin-Wu and Wang, Z. and Guo, Wanlin and Rabczuk, Timon}, title = {A comparative study of two molecular mechanics models based on harmonic potentials}, series = {Journal of Applied Physics}, journal = {Journal of Applied Physics}, abstract = {A comparative study of two molecular mechanics models based on harmonic potentials}, subject = {Angewandte Mathematik}, language = {en} } @article{BucherMost, author = {Bucher, Christian and Most, Thomas}, title = {A comparison of approximate response functions in structural reliability analysis}, series = {Probabilistic Engineering Mechanics}, journal = {Probabilistic Engineering Mechanics}, pages = {154 -- 163}, abstract = {A comparison of approximate response functions in structural reliability analysis}, subject = {Angewandte Mathematik}, language = {en} } @article{TalebiSilaniBordasetal., author = {Talebi, Hossein and Silani, Mohammad and Bordas, St{\´e}phane Pierre Alain and Kerfriden, Pierre and Rabczuk, Timon}, title = {A computational library for multiscale modeling of material failure}, series = {Computational Mechanics}, journal = {Computational Mechanics}, abstract = {A computational library for multiscale modeling of material failure}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhuangHuangRabczuketal., author = {Zhuang, Xiaoying and Huang, Runqiu and Rabczuk, Timon and Liang, C.}, title = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage}, series = {Mathematical Problems in Engineering}, journal = {Mathematical Problems in Engineering}, abstract = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhangWangLahmeretal., author = {Zhang, Chao and Wang, Cuixia and Lahmer, Tom and He, Pengfei and Rabczuk, Timon}, title = {A dynamic XFEM formulation for crack identification}, series = {International Journal of Mechanics and Materials in Design}, journal = {International Journal of Mechanics and Materials in Design}, pages = {427 -- 448}, abstract = {A dynamic XFEM formulation for crack identification}, subject = {Angewandte Mathematik}, language = {en} } @article{YangBudarapuMahapatraetal., author = {Yang, Shih-Wei and Budarapu, Pattabhi Ramaiah and Mahapatra, D.R. and Bordas, St{\´e}phane Pierre Alain and Zi, Goangseup and Rabczuk, Timon}, title = {A Meshless Adaptive Multiscale Method for Fracture}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {382 -- 395}, abstract = {A Meshless Adaptive Multiscale Method for Fracture}, subject = {Angewandte Mathematik}, language = {en} } @article{MostBucher, author = {Most, Thomas and Bucher, Christian}, title = {A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions}, series = {Structural Engineering and Mechanics}, journal = {Structural Engineering and Mechanics}, pages = {315 -- 332}, abstract = {A moving least squares weighting function for the element-free Galerkin method which almost fulfills essential boundary conditions}, subject = {Angewandte Mathematik}, language = {en} } @article{Most, author = {Most, Thomas}, title = {A natural neighbour-based moving least-squares approach for the element-free Galerkin method}, series = {International Journal for Numerical Methods in Engineering}, journal = {International Journal for Numerical Methods in Engineering}, pages = {224 -- 252}, abstract = {A natural neighbour-based moving least-squares approach for the element-free Galerkin method}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenXuanRabczukNguyenThanhetal., author = {Nguyen-Xuan, Hung and Rabczuk, Timon and Nguyen-Thanh, Nhon and Nguyen-Thoi, T. and Bordas, St{\´e}phane Pierre Alain}, title = {A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates}, series = {Computational Mechanics}, journal = {Computational Mechanics}, pages = {679 -- 701}, abstract = {A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates}, subject = {Angewandte Mathematik}, language = {en} } @article{JiaZhangRabczuk, author = {Jia, Yue and Zhang, Yongjie and Rabczuk, Timon}, title = {A Novel Dynamic Multilevel Technique for Image Registration}, series = {Computers and Mathematics with Applications}, journal = {Computers and Mathematics with Applications}, abstract = {A Novel Dynamic Multilevel Technique for Image Registration}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenTuanLahmerDatchevaetal., author = {Nguyen-Tuan, Long and Lahmer, Tom and Datcheva, Maria and Stoimenova, Eugenia and Schanz, Tom}, title = {A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses}, series = {Computers and Geotechnics}, journal = {Computers and Geotechnics}, pages = {23 -- 32}, abstract = {A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses}, subject = {Angewandte Mathematik}, language = {en} } @article{KerfridenGouryRabczuketal., author = {Kerfriden, Pierre and Goury, O. and Rabczuk, Timon and Bordas, St{\´e}phane Pierre Alain}, title = {A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {169 -- 188}, abstract = {A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics}, subject = {Angewandte Mathematik}, language = {en} } @article{DoeringHoffmeyerSeegeretal., author = {D{\"o}ring, R. and Hoffmeyer, J. and Seeger, T. and Vormwald, Michael}, title = {A plasticity model for calculating stress-strain sequences under multiaxial nonproportional cyclic loading}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {587 -- 596}, abstract = {A plasticity model for calculating stress-strain sequences under multiaxial nonproportional cyclic loading}, subject = {Angewandte Mathematik}, language = {en} } @article{SilaniZiaeiRadTalebietal., author = {Silani, Mohammad and Ziaei-Rad, S. and Talebi, Hossein and Rabczuk, Timon}, title = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, abstract = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukCesardeSaetal., author = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Jorge, R.N.}, title = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares}, series = {Computational Mechanics}, journal = {Computational Mechanics}, abstract = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares}, subject = {Angewandte Mathematik}, language = {en} } @article{TalebiZiSilanietal., author = {Talebi, Hossein and Zi, Goangseup and Silani, Mohammad and Samaniego, Esteban and Rabczuk, Timon}, title = {A simple circular cell method for multilevel finite element analysis}, series = {Journal of Applied Mathematics}, journal = {Journal of Applied Mathematics}, doi = {10.1155/2012/526846}, abstract = {A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed.}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhThaiHoangNguyenXuanetal., author = {Nguyen-Thanh, Nhon and Thai-Hoang, C. and Nguyen-Xuan, Hung and Rabczuk, Timon}, title = {A smoothed finite element method for the static and free vibration analysis of shells}, series = {Journal of Civil Engineering and Architecture}, journal = {Journal of Civil Engineering and Architecture}, pages = {13 -- 25}, abstract = {A smoothed finite element method for the static and free vibration analysis of shells}, subject = {Angewandte Mathematik}, language = {en} } @article{VuBacLahmerZhuangetal., author = {Vu-Bac, N. and Lahmer, Tom and Zhuang, Xiaoying and Nguyen-Thoi, T. and Rabczuk, Timon}, title = {A software framework for probabilistic sensitivity analysis for computationally expensive models}, series = {Advances in Engineering Software}, journal = {Advances in Engineering Software}, pages = {19 -- 31}, abstract = {A software framework for probabilistic sensitivity analysis for computationally expensive models}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangRabczukPark, author = {Jiang, Jin-Wu and Rabczuk, Timon and Park, Harold S.}, title = {A Stillinger-Weber Potential for Single-Layer Black Phosphorus, and the Importance of Cross-Pucker Interactions for Negative Poisson's Ratio and Edge Stress-Induced Bending}, series = {Nanoscale}, journal = {Nanoscale}, doi = {10.1039/C4NR07341J}, abstract = {The distinguishing structural feature of single-layered black phosphorus is its puckered structure, which leads to many novel physical properties. In this work, we first present a new parameterization of the Stillinger-Weber potential for single-layered black phosphorus. In doing so, we reveal the importance of a cross-pucker interaction term in capturing its unique mechanical properties, such as a negative Poisson's ratio. In particular, we show that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction. As a consequence, single-layered black phosphorus has a negative Poisson's ratio in the direction perpendicular to the atomic plane. As an additional demonstration of the impact of the cross-pucker interaction, we show that it is also the key factor that enables capturing the edge stress-induced bending of single-layered black phosphorus that has been reported in ab initio calculations.}, subject = {Angewandte Mathematik}, language = {en} } @article{GhorashiLahmerBagherzadehetal., author = {Ghorashi, Seyed Shahram and Lahmer, Tom and Bagherzadeh, Amir Saboor and Zi, Goangseup and Rabczuk, Timon}, title = {A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials}, series = {Engineering Geology}, journal = {Engineering Geology}, abstract = {A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangParkGalletal., author = {Jiang, Jin-Wu and Park, Harold S. and Gall, K. and Leach, A. and Rabczuk, Timon}, title = {A Surface Stacking Fault Energy Approach to Predicting Defect Nucleation in Surface-Dominated Nanostructures}, series = {Journal of the Mechanics and Physics of Solids}, journal = {Journal of the Mechanics and Physics of Solids}, abstract = {A Surface Stacking Fault Energy Approach to Predicting Defect Nucleation in Surface-Dominated Nanostructures}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiangJiaetal., author = {Zhao, Jun-Hua and Jiang, Jin-Wu and Jia, Yue and Guo, Wanlin and Rabczuk, Timon}, title = {A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates}, series = {Carbon}, journal = {Carbon}, doi = {10.1016/j.carbon.2013.01.041}, pages = {108 -- 119}, abstract = {Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems.}, subject = {Angewandte Mathematik}, language = {en} } @article{SilaniTalebiZiaeiRadetal., author = {Silani, Mohammad and Talebi, Hossein and Ziaei-Rad, S. and Hamouda, A.M.S. and Zi, Goangseup and Rabczuk, Timon}, title = {A three dimensional Extended Arlequin Method for Dynamic Fracture}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {425 -- 431}, abstract = {A three dimensional Extended Arlequin Method for Dynamic Fracture}, subject = {Angewandte Mathematik}, language = {en} } @article{VuBacSilaniLahmeretal., author = {Vu-Bac, N. and Silani, Mohammad and Lahmer, Tom and Zhuang, Xiaoying and Rabczuk, Timon}, title = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {520 -- 535}, abstract = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)}, subject = {Angewandte Mathematik}, language = {en} } @article{MsekhSargadoJamshidianetal., author = {Msekh, Mohammed Abdulrazzak and Sargado, M. and Jamshidian, M. and Areias, Pedro and Rabczuk, Timon}, title = {ABAQUS implementation of phase_field model for brittle fracture}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {472 -- 484}, abstract = {ABAQUS implementation of phase_field model for brittle fracture}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangWangRabczuk, author = {Jiang, Jin-Wu and Wang, Bing-Shen and Rabczuk, Timon}, title = {Acoustic and breathing phonon modes in bilayer graphene with Moire-acute patterns}, series = {Applied Physics Letters}, journal = {Applied Physics Letters}, doi = {10.1063/1.4735246}, abstract = {The lattice dynamics properties are investigated for twisting bilayer graphene. There are big jumps for the inter-layer potential at twisting angle θ=0° and 60°, implying the stability of Bernal-stacking and the instability of AA-stacking structures, while a long platform in [8,55]° indicates the ease of twisting bilayer graphene in this wide angle range. Significant frequency shifts are observed for the z breathing mode around θ=0° and 60°, while the frequency is a constant in a wide range [8,55]°. Using the z breathing mode, a mechanical nanoresonator is proposed to operate on a robust resonant frequency in terahertz range.}, subject = {Angewandte Mathematik}, language = {en} } @article{EckardtKoenke, author = {Eckardt, Stefan and K{\"o}nke, Carsten}, title = {Adaptive damage simulation of concrete using heterogeneous multiscale models}, series = {Journal of Algorithms \& Computational Technology}, journal = {Journal of Algorithms \& Computational Technology}, pages = {275 -- 297}, abstract = {Adaptive damage simulation of concrete using heterogeneous multiscale models}, subject = {Angewandte Mathematik}, language = {en} } @article{BudarapuGracieBordasetal., author = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon}, title = {An adaptive multiscale method for quasi-static crack growth}, series = {Computational Mechanics}, journal = {Computational Mechanics}, doi = {10.1007/s00466-013-0952-6}, pages = {1129 -- 1148}, abstract = {This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom-atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement.}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenXuanLiuBordasetal., author = {Nguyen-Xuan, Hung and Liu, G.R. and Bordas, St{\´e}phane Pierre Alain and Natarajan, S. and Rabczuk, Timon}, title = {An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {252 -- 273}, abstract = {An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhMuthuZhuangetal., author = {Nguyen-Thanh, Nhon and Muthu, Jacob and Zhuang, Xiaoying and Rabczuk, Timon}, title = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics}, series = {Computational Mechanics}, journal = {Computational Mechanics}, pages = {369 -- 385}, abstract = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhRabczukNguyenXuanetal., author = {Nguyen-Thanh, Nhon and Rabczuk, Timon and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain}, title = {An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes}, series = {Journal of Computational and Applied Mathematics}, journal = {Journal of Computational and Applied Mathematics}, pages = {2112 -- 2135}, abstract = {An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhRabczukNguyenXuanetal., author = {Nguyen-Thanh, Nhon and Rabczuk, Timon and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain}, title = {An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates}, series = {Finite Elements in Analysis \& Design}, journal = {Finite Elements in Analysis \& Design}, pages = {519 -- 535}, abstract = {An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasPintodaCostaRabczuketal., author = {Areias, Pedro and Pinto da Costa, A. and Rabczuk, Timon and Queiros de Melo, F. J. M. and Dias-da-Costa, D.}, title = {An alternative formulation for quasi-static frictional and cohesive contact problems}, series = {Computational Mechanics}, journal = {Computational Mechanics}, pages = {807 -- 824}, abstract = {An alternative formulation for quasi-static frictional and cohesive contact problems}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoGuoRabczuk, author = {Zhao, Jun-Hua and Guo, Wanlin and Rabczuk, Timon}, title = {An analytical molecular mechanics model for the elastic properties of crystalline polyethylene}, series = {Journal of Applied Physics}, journal = {Journal of Applied Physics}, doi = {10.1063/1.4745035}, abstract = {We present an analytical model to relate the elastic properties of crystalline polyethylene based on a molecular mechanics approach. Along the polymer chains direction, the united-atom (UA) CH2-CH2 bond stretching, angle bending potentials are replaced with equivalent Euler-Bernoulli beams. Between any two polymer chains, the explicit formulae are derived for the van der Waals interaction represented by the linear springs of different stiffness. Then, the nine independent elastic constants are evaluated systematically using the formulae. The analytical model is finally validated by present united-atom molecular dynamics (MD) simulations and against available all-atom molecular dynamics results in the literature. The established analytical model provides an efficient route for mechanical characterization of crystalline polymers and related materials.}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhangZhaoJiaetal., author = {Zhang, Yancheng and Zhao, Jun-Hua and Jia, Yue and Mabrouki, Tarek and Gong, Yadong and Wei, Ning and Rabczuk, Timon}, title = {An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase}, series = {Composite Structures}, journal = {Composite Structures}, pages = {261 -- 269}, abstract = {An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase}, subject = {Angewandte Mathematik}, language = {en} } @article{Zabel, author = {Zabel, Volkmar}, title = {An application of discrete wavelet analysis and connection coefficients to parametric system identification}, series = {Structural Health Monitoring}, journal = {Structural Health Monitoring}, pages = {5 -- 18}, abstract = {An application of discrete wavelet analysis and connection coefficients to parametric system identification}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThoiPhungVanRabczuketal., author = {Nguyen-Thoi, T. and Phung-Van, P. and Rabczuk, Timon and Nguyen-Xuan, Hung and Le-Van, C.}, title = {An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems}, series = {International Journal of Computational Methods}, journal = {International Journal of Computational Methods}, abstract = {An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems}, subject = {Angewandte Mathematik}, language = {en} } @article{BrehmZabelBucher, author = {Brehm, Maik and Zabel, Volkmar and Bucher, Christian}, title = {An automatic mode pairing strategy using an enhanced modal assurance citerion based on modal strain energies}, series = {Journal of Sound and Vibration}, journal = {Journal of Sound and Vibration}, doi = {10.1016/j.jsv.2010.07.006}, pages = {5375 -- 5392}, abstract = {In the context of finite element model updating using output-only vibration test data, natural frequencies and mode shapes are used as validation criteria. Consequently, the correct pairing of experimentally obtained and numerically derived natural frequencies and mode shapes is important. In many cases, only limited spatial information is available and noise is present in the measurements. Therefore, the automatic selection of the most likely numerical mode shape corresponding to a particular experimentally identified mode shape can be a difficult task. The most common criterion for indicating corresponding mode shapes is the modal assurance criterion. Unfortunately, this criterion fails in certain cases and is not reliable for automatic approaches. In this paper, the purely mathematical modal assurance criterion will be enhanced by additional physical information from the numerical model in terms of modal strain energies. A numerical example and a benchmark study with experimental data are presented to show the advantages of the proposed energy-based criterion in comparison to the traditional modal assurance criterion.}, subject = {Angewandte Mathematik}, language = {en} } @article{PhanDaoNguyenXuanThaiHoangetal., author = {Phan-Dao, H. and Nguyen-Xuan, Hung and Thai-Hoang, C. and Nguyen-Thoi, T. and Rabczuk, Timon}, title = {An edge-based smoothed finite element method for analysis of laminated composite plates}, series = {International Journal of Computational Methods}, journal = {International Journal of Computational Methods}, abstract = {An edge-based smoothed finite element method for analysis of laminated composite plates}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhValizadehNguyenetal., author = {Nguyen-Thanh, Nhon and Valizadeh, Navid and Nguyen, Manh Hung and Nguyen-Xuan, Hung and Zhuang, Xiaoying and Areias, Pedro and Zi, Goangseup and Bazilevs, Yuri and De Lorenzis, Laura and Rabczuk, Timon}, title = {An extended isogeometric thin shell analysis based on Kirchhoff-Love theory}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {265 -- 291}, abstract = {An extended isogeometric thin shell analysis based on Kirchho_-Love theory}, subject = {Angewandte Mathematik}, language = {en} } @article{SimpsonBordasTrevelyanetal., author = {Simpson, R. and Bordas, St{\´e}phane Pierre Alain and Trevelyan, J. and Kerfriden, Pierre and Rabczuk, Timon}, title = {An Isogeometric Boundary Element Method for elastostatic analysis}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, doi = {10.1016/j.cma.2011.08.008}, abstract = {The concept of isogeometric analysis, where functions that are used to describe geometry in CAD software are used to approximate the unknown fields in numerical simulations, has received great attention in recent years. The method has the potential to have profound impact on engineering design, since the task of meshing, which in some cases can add significant overhead, has been circumvented. Much of the research effort has been focused on finite element implementations of the isogeometric concept, but at present, little has been seen on the application to the Boundary Element Method. The current paper proposes an Isogeometric Boundary Element Method (BEM), which we term IGABEM, applied to two-dimensional elastostatic problems using Non-Uniform Rational B-Splines (NURBS). We find it is a natural fit with the isogeometric concept since both the NURBS approximation and BEM deal with quantities entirely on the boundary. The method is verified against analytical solutions where it is seen that superior accuracies are achieved over a conventional quadratic isoparametric BEM implementation.}, subject = {Angewandte Mathematik}, language = {en} } @article{AnitescuJiaZhangetal., author = {Anitescu, Cosmin and Jia, Yue and Zhang, Yongjie and Rabczuk, Timon}, title = {An isogeometric collocation method using superconvergent points}, series = {Computer Methods in Applied Mechanics and Engineer-ing}, journal = {Computer Methods in Applied Mechanics and Engineer-ing}, pages = {1073 -- 1097}, abstract = {An isogeometric collocation method using superconvergent points}, subject = {Angewandte Mathematik}, language = {en} } @article{RabizadehSaboorBagherzadehRabczuk, author = {Rabizadeh, Ehsan and Saboor Bagherzadeh, Amir and Rabczuk, Timon}, title = {Application of goal-oriented error estimation and adaptive mesh refinement on thermo-mechanical multifield problems}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {27 -- 44}, abstract = {Application of goal-oriented error estimation and adaptive mesh re_nement on thermo-mechanical multi_eld problems}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukDiasdaCosta, author = {Areias, Pedro and Rabczuk, Timon and Dias-da-Costa, D.}, title = {Assumed-metric spherically-interpolated quadrilateral shell element}, series = {Finite Elements in Analysis and Design}, journal = {Finite Elements in Analysis and Design}, pages = {53 -- 67}, abstract = {Assumed-metric spherically-interpolated quadrilateral shell element}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukDiasdaCosta, author = {Areias, Pedro and Rabczuk, Timon and Dias-da-Costa, D.}, title = {Asymmetric Shell Elements Based on a Corrected Updated-Lagrangian Approach}, series = {CMES: Computer Modeling in Engineering and Sciences}, journal = {CMES: Computer Modeling in Engineering and Sciences}, abstract = {Asymmetric Shell Elements Based on a Corrected Updated-Lagrangian Approach}, subject = {Angewandte Mathematik}, language = {en} } @article{LahmerKnabeNikullaetal., author = {Lahmer, Tom and Knabe, Tina and Nikulla, Susanne and Reuter, Markus}, title = {Bewertungsmethoden f{\"u}r Modelle des konstruktiven Ingenieurbaus}, series = {Bautechnik}, journal = {Bautechnik}, pages = {60 -- 64}, abstract = {Bewertungsmethoden f{\"u}r Modelle des konstruktiven Ingenieurbaus}, subject = {Angewandte Mathematik}, language = {de} } @article{ZhaoLuRabczuk, author = {Zhao, Jun-Hua and Lu, Lixin and Rabczuk, Timon}, title = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines}, series = {The Journal of Chemical Physics}, journal = {The Journal of Chemical Physics}, doi = {10.1063/1.4878115}, abstract = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiaWeietal., author = {Zhao, Jun-Hua and Jia, Yue and Wei, Ning and Rabczuk, Timon}, title = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes}, series = {Journal of Applied Mechanics}, journal = {Journal of Applied Mechanics}, abstract = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes}, subject = {Angewandte Mathematik}, language = {en} } @article{JoshiHildebrandAloraieretal., author = {Joshi, Suraj and Hildebrand, J{\"o}rg and Aloraier, Abdulkareem S. and Rabczuk, Timon}, title = {Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate}, series = {Computational Materials Science}, journal = {Computational Materials Science}, doi = {10.1016/j.commatsci.2012.11.029}, pages = {559 -- 565}, abstract = {This paper presents several aspects of characterization of welding heat source parameters in Goldak's double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40\% to 80\% in increments of 10\%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak's double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters.}, subject = {Angewandte Mathematik}, language = {en} }