@incollection{Hartmann, author = {Hartmann, Frank}, title = {Zwischen Leibniz und Google - Otlet der Weltbibliothekar}, series = {Vom Buch zur Datenbank. Paul Otlets Utopie der Wissensvisualisierung}, booktitle = {Vom Buch zur Datenbank. Paul Otlets Utopie der Wissensvisualisierung}, publisher = {Avinus}, address = {Berlin}, doi = {10.25643/bauhaus-universitaet.2268}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140811-22685}, pages = {11 -- 61}, abstract = {Gegen Ende des 19. Jahrhunderts geriet das Dokumentationswesen in eine Krise: wie l{\"a}sst sich das kulturelle Wissen nachhaltiger organisieren? Paul Otlet (1868-1944), ein belgischer Industriellenerbe und studierter Rechtsanwalt, entwickelte zusammen mit Henri La Fontaine ab 1895 ein Ordnungs- und Klassifikationssystem, das das millionenfach publizierte „Weltwissen" dokumentieren sollte. Otlets Anspruch war die Schaffung eines „Instrument d'ubiquit{\´e}", das zur „Hyper-Intelligence" f{\"u}hren sollte. Jahrzehnte vor Web und Wikis weisen diese Ideen auf eine globale Vernetzung des Wissens hin. Der vorliegende Titel erinnert an den Pionier Paul Otlet mit einer ausf{\"u}hrlichen Einleitung von Frank Hartmann (Bauhaus-Universit{\"a}t Weimar), Beitr{\"a}gen von W. Boyd Rayward (University of Illinois), Charles van den Heuvel (K{\"o}niglich Niederl{\"a}ndische Akademie der Wissenschaften) und Wouter Van Acker (Universit{\"a}t Gent).}, subject = {philosophy}, language = {de} } @inproceedings{LahmerGhorashi, author = {Lahmer, Tom and Ghorashi, Seyed Shahram}, title = {XFEM-BASED CRACK IDENTIFICATION APPLYING REGULARIZING METHODS IN A MULTILEVEL APPROACH}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2771}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27717}, pages = {9}, abstract = {Many structures in different engineering applications suffer from cracking. In order to make reliable prognosis about the serviceability of those structures it is of utmost importance to identify cracks as precisely as possible by non-destructive testing. A novel approach (XIGA), which combines the Isogeometric Analysis (IGA) and the Extended Finite Element Method (XFEM) is used for the forward problem, namely the analysis of a cracked material, see [1]. Applying the NURBS (Non-Uniform Rational B-Spline) based approach from IGA together with the XFEM allows to describe effectively arbitrarily shaped cracks and avoids the necessity of remeshing during the crack identification problem. We want to exploit these advantages for the inverse problem of detecting existing cracks by non-destructive testing, see e.g. [2]. The quality of the reconstructed cracks however depends on two major issues, namely the quality of the measured data (measurement error) and the discretization of the crack model. The first one will be taken into account by applying regularizing methods with a posteriori stopping criteria. The second one is critical in the sense that too few degrees of freedom, i.e. the number of control points of the NURBS, do not allow for a precise description of the crack. An increased number of control points, however, increases the number of unknowns in the inverse analysis and intensifies the ill-posedness. The trade-off between accuracy and stability is aimed to be found by applying an inverse multilevel algorithm [3, 4] where the identification is started with short knot vectors which successively will be enlarged during the identification process.}, subject = {Angewandte Informatik}, language = {en} } @article{Kalisch, author = {Kalisch, Dominik}, title = {Wissen wer wo wohnt}, doi = {10.25643/bauhaus-universitaet.2669}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160822-26695}, abstract = {In cities people live together in neighbourhoods. Here they can find the infrastructure they need, starting with shops for the daily purpose to the life-cycle based infrastructures like kindergartens or nursing homes. But not all neighbourhoods are identical. The infrastructure mixture varies from neighbourhood to neighbourhood, but different people have different needs which can change e.g. based on the life cycle situation or their affiliation to a specific milieu. We can assume that a person or family tries to settle in a specific neighbourhood that satisfies their needs. So, if the residents are happy with a neighbourhood, we can further assume that this neighbourhood satisfies their needs. The socio-oeconomic panel (SOEP) of the German Institute for Economy (DIW) is a survey that investigates the economic structure of the German population. Every four years one part of this survey includes questions about what infrastructures can be found in the respondents neighbourhood and the satisfaction of the respondent with their neighbourhood. Further, it is possible to add a milieu estimation for each respondent or household. This gives us the possibility to analyse the typical neighbourhoods in German cities as well as the infrastructure profiles of the different milieus. Therefore, we take the environment variables from the dataset and recode them into a binary variable - whether an infrastructure is available or not. According to Faust (2005), these sets can also be understood, as a network of actors in a neighbourhood, which share two, three or more infrastructures. Like these networks, this neighbourhood network can also be visualized as a bipartite affiliation network and therefore analysed using correspondence analysis. We will show how a neighbourhood analysis will benefit from an upstream correspondence analysis and how this could be done. We will also present and discuss the results of such an analysis.}, subject = {urban planning}, language = {de} } @inproceedings{AhmadZabelKoenke, author = {Ahmad, Sofyan and Zabel, Volkmar and K{\"o}nke, Carsten}, title = {WAVELET-BASED INDICATORS FOR RESPONSE SURFACE MODELS IN DAMAGE IDENTIFICATION OF STRUCTURES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2758}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170306-27588}, pages = {14}, abstract = {In this paper, wavelet energy damage indicator is used in response surface methodology to identify the damage in simulated filler beam railway bridge. The approximate model is addressed to include the operational and surrounding condition in the assessment. The procedure is split into two stages, the training and detecting phase. During training phase, a so-called response surface is built from training data using polynomial regression and radial basis function approximation approaches. The response surface is used to detect the damage in structure during detection phase. The results show that the response surface model is able to detect moderate damage in one of bridge supports while the temperatures and train velocities are varied.}, subject = {Angewandte Mathematik}, language = {en} } @article{TonnTatarin, author = {Tonn, Christian and Tatarin, Ren{\´e}}, title = {Volumen Rendering in der Architektur: {\"U}berlagerung und Kombination von 3D Voxel Volumendaten mit 3D Geb{\"a}udemodellen}, doi = {10.25643/bauhaus-universitaet.2671}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160822-26718}, abstract = {Volumerendering ist eine Darstellungstechnik, um verschiedene r{\"a}umliche Mess- und Simulationsdaten anschaulich, interaktiv grafisch darzustellen. Im folgenden Beitrag wird ein Verfahren vorgestellt, mehrere Volumendaten mit einem Architekturfl{\"a}chenmodell zu {\"u}berlagern. Diese komplexe Darstellungsberechnung findet mit hardwarebeschleunigten Shadern auf der Grafikkarte statt. Im Beitrag wird hierzu der implementierte Softwareprototyp "VolumeRendering" vorgestellt. Neben dem interaktiven Berechnungsverfahren wurde ebenso Wert auf eine nutzerfreundliche Bedienung gelegt. Das Ziel bestand darin, eine einfache Bewertung der Volumendaten durch Fachplaner zu erm{\"o}glichen. Durch die {\"U}berlagerung, z. B. verschiedener Messverfahren mit einem Fl{\"a}chenmodell, ergeben sich Synergien und neue Auswertungsm{\"o}glichkeiten. Abschließend wird anhand von Beispielen aus einem interdisziplin{\"a}ren Forschungsprojekt die Anwendung des Softwareprototyps illustriert.}, subject = {Multiple Volume Rendering}, language = {de} } @phdthesis{Wieteska, author = {Wieteska, Marcin}, title = {Untersuchungen zur Optimierung des Feuerwiderstandsverhaltens von Gipsplatten}, publisher = {Marcin Wieteska}, address = {Warszawa}, isbn = {978-83-936473-0-9}, doi = {10.25643/bauhaus-universitaet.1782}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121207-17829}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {176}, abstract = {Die Qualit{\"a}t von Beplankungselementen wirkt sich deutlich auf den Feuerwiderstand von Metallst{\"a}nder-Wandkonstruktionen aus. Daher wurde im Rahmen dieser Arbeit der Einfluss von Zus{\"a}tzen in Gipsplatten bez{\"u}glich einer m{\"o}glichen Verbesserung dieser Eigenschaft untersucht. Zu diesem Zweck wurden spezielle, den jeweiligen Untersuchungsbedingungen angepasste Probek{\"o}rper unter Verwendung verschiedenster Zus{\"a}tze gefertigt. Die Beurteilung deren Auswirkungen erfolgte insbesondere mittels nachfolgender f{\"u}nf Kriterien: 1) dem Zeitpunkt der Temperaturerh{\"o}hung nach der Probek{\"o}rperentw{\"a}sserung, 2) dem Maximalwert der Plattenr{\"u}ckseitentemperatur, 3) der Gr{\"o}ße und der Anzahl der Risse, 4) der Plattenstabilit{\"a}t nach der W{\"a}rmebeanspruchung, 5) der Verk{\"u}rzung von prismatischen Probek{\"o}rpern. Besonders wichtig war hierbei die Charakterisierung der Auswirkungen einer simulierten Brandbeanspruchung von 970 °C {\"u}ber 90 Minuten auf Labor-Gipsplatten. Dabei wurde die Temperatur{\"a}nderung auf der Plattenr{\"u}ckseite {\"u}ber den gesamten Pr{\"u}fzeitraum kontinuierlich erfasst. Die Bewertung des Zusammenhalts der Platten nach der thermischen Beanspruchung erfolgte erstmals quantitativ {\"u}ber Anzahl und Gr{\"o}ße der an den Proben entstandenen Risse. Urs{\"a}chlich f{\"u}r die Rissbildung ist die Verringerung des Probek{\"o}rpervolumens infolge des ausgetriebenen Kristallwassers. Da dieser Parameter im Plattenversuch nicht bestimmt werden kann, wurde erg{\"a}nzend das L{\"a}ngen{\"a}nderungsverhalten von Prismen im Ergebnis einer 90min{\"u}tigen Temperung bei 1000 °C im Muffelofen ermittelt. Besonders vorteilhaft hat sich die Zugabe von 80 g/m2 Glasfasern und 7,75 \% Kalksteinmehl auf das Verhalten von Gipsplatten bei Brandbeanspruchung ausgewirkt. Diese Verbesserung ist insbesondere auf h{\"o}here Stabilit{\"a}t und geringere Schrumpfung der Gipsplatte zur{\"u}ckzuf{\"u}hren. Basierend auf den im Labormaßstab erhaltenen Ergebnissen wurden Rezepturvorschl{\"a}ge zur Verbesserung des Feuerwiderstandsverhaltens von Gipsplatten unter Praxisbedingungen entwickelt. Die Herstellung der erforderlichen großformatigen Platten erfolgte auf der Bandstraße der Knauf Gips KG. Diese Platten wurden als Wandkonstruktion mit zweilagiger Beplankung einer großtechnischen Pr{\"u}fung erfolgreich unterzogen. Eine geringere Durchbiegung der Wandkonstruktion, eine verminderte Volumenreduzierung der Platten sowie eine erh{\"o}hte Plattenstabilit{\"a}t belegen die verbesserten Eigenschaften dieser modifizierten Feuerschutzplatte. Weitere durchgef{\"u}hrte Untersuchungen ergaben, dass es unerheblich ist, ob die Platten auf Basis von Natur- oder REA-Gips bzw. mit hohem oder niedrigem Fl{\"a}chengewicht gefertigt wurden. Das eindeutig beste Ergebnis mit einer Feuerwiderstandsdauer von 118 Minuten hat eine Wandkonstruktion aus Feuerschutzplatten auf Basis eines Stuckgipses aus 100 \% REA-Gips mit einem Anteil von 83,9 g/m2 Glasfasern und 1 \% Vermiculit und einem Fl{\"a}chengewicht von 10,77 kg/m2, bei einer Plattenst{\"a}rke von 12,5 mm. Die als Ziel vorgebende Feuerwiderstandsdauer von 120 Minuten bei zweilagiger Beplankung ohne D{\"a}mmstoff k{\"o}nnte k{\"u}nftig erreicht werden, wenn es gelingt, die Volumenreduzierung noch besser zu kompensieren und die Plattenstabilit{\"a}t zu steigern. Eine M{\"o}glichkeit hierzu ist die Substitution der beidseitigen Kartonlagen durch eine Glasfaser-Vliesummantelung. Die Wandkonstruktion W112 ohne D{\"a}mmstoff erreicht dabei eine Feuerwiderstandsdauer von weit {\"u}ber 120 Minuten, wobei der Gipskern mit Glasfasern armiert ist.}, subject = {0947}, language = {de} } @masterthesis{Marwitz2011, type = {Bachelor Thesis}, author = {Marwitz, Simon Jakob}, title = {Untersuchungen zur optimalen Sensorpositionierung bei der experimentellen Modalanalyse}, doi = {10.25643/bauhaus-universitaet.1531}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120128-15311}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {70}, year = {2011}, abstract = {Experimentelle Untersuchung eines Verfahrens zur optimalen Positionierung von Referenzsensoren bei der experimentellen Modalanalyse mit output-only Methoden nach Brehm (2011). Untersuchung des Einflusses der Referenzsensorpositionierung, -anzahl und der Positionierung der wandernden Sensoren unter Anwendung des Stochastic-Subspace-Verfahrens zur Auswertung der output-only Messdaten.}, subject = {Modalanalyse}, language = {de} } @phdthesis{Schneider, author = {Schneider, Jens}, title = {Untersuchungen zum Alterungsverhalten und zur Langzeitstabilit{\"a}t von Y-TZP/Al2O3-Dispersionskeramiken (ATZ) f{\"u}r die Anwendung in der H{\"u}ft-Endoprothetik}, doi = {10.25643/bauhaus-universitaet.1776}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121130-17761}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {151}, abstract = {6 Zusammenfassung und Ausblick Die hydrothermal induzierte Phasentransformation konnte f{\"u}r ATZ-Keramik mit tiefenge-mittelten und tiefenaufgel{\"o}sten Methoden charkterisiert und quantifiziert werden. Die zeit- und temperaturabh{\"a}ngige Alterungskinetik von ATZ wurde durch neun Tempera-turstufen in einem Temperaturbereich von 50 °C bis 134 °C untersucht und die kinetischen Parameter nummerisch bestimmt. F{\"u}r 3Y-TZP wurde diese Prozedur bei drei Temperaturen im Temperaturbereich von 70 °C bis 134 °C angewendet. Aufgrund des ARRHENIUS-Verhaltens der Umwandlungskinetik konnte der zeitliche Verlauf der isotherm stattfinden-den hydrothermal induzierten Phasentransformation bei K{\"o}rpertemperatur simuliert wer-den. Die Simulation dient zur Bewertung der Langzeitstabilit{\"a}t von medizinischen Implanta-ten aus ATZ bzw. 3Y-TZP. Die Untersuchungen wurden in Wasser und in Wasserdampf bzw. wasserdampfges{\"a}ttigter Luft durchgef{\"u}hrt. Die Langzeitsimulation f{\"u}r 3Y-TZP wurde an-hand von Explantat-Untersuchungen verifiziert. ATZ zeigt gegen{\"u}ber 3Y-TZP eine h{\"o}here Alterungsstabilit{\"a}t bezogen auf die zeitliche Ent-wicklung der monoklinen Phase. Im Hinblick auf die Oberfl{\"a}chenh{\"a}rte, die durch die Pha-senumwandlung stark beeinflusst wird, erweist sich ATZ {\"u}ber einen langen Alterungszeit-raum stabiler als 3Y-TZP. Bis zu einem monoklinen Gehalt von 40 \% beweist ATZ einen deutlichen H{\"a}rtevorteil gegen{\"u}ber 3Y TZP, dieser entspricht in der Langzeitsimulation f{\"u}r die Wasserlagerung ca. 35 Jahre. Das wirkt sich insbesondere bei Verschleißpaarungen wie beim k{\"u}nstlichen H{\"u}ftgelenk positiv aus. Verschleißuntersuchungen an einer neu entwickelten Kugel-auf-Scheibe-Geometrie mit li-nearer Kinematik, die dem H{\"u}ftgelenk nachempfunden wurde, belegen die vorteilhaften Verschleißeigenschaften von ATZ in Form von sehr geringen Abtragsraten und einer intak-ten Oberfl{\"a}che nach 720 000 absolvierten Zyklen. Dabei wurde sogar eine Aufh{\"a}rtung der Oberfl{\"a}che durch die Verschleißbeanspruchung um bis zu 8 \% nachgewiesen. Bei der tiefengemittelten Charakterisierung der hydrothermalen Alterung wurde in beiden Materialtypen festgestellt, dass die Geschwindigkeit der Phasentransformation neben der Temperatur merklich von der {\"A}nderung der H2O-Stoffmengenkonzentrantion an der Ober-fl{\"a}che der Keramik abh{\"a}ngig ist, was sich mit den unterschiedlichen Aktivierungsenergien f{\"u}r Wasser- bzw. Wasserdampflagerung belegen l{\"a}sst. Die Aktivierungsenergie Ea der hyd-rothermalen Phasentransformation wurde mit Hilfe der ARRHENIUS-Beziehung ermittelt und betr{\"a}gt f{\"u}r ATZ bei Wasserdampflagerung 102 kJ/mol und bei Wasserlagerung 92 kJ/mol. F{\"u}r Y-TZP betr{\"a}gt die Aktivierungsenergie 114 kJ/mol bei Wasserdampflagerung und 102 kJ/mol bei Wasserlagerung. Der resultierende pr{\"a}exponentielle Faktor k0 unterscheidet sich f{\"u}r Wasserlagerung und Wasserdampflagerung um eine Gr{\"o}ßenordnung, was auf einen leicht andersartigen thermisch aktivierten Gesamtprozess hinweist. Der Avrami-Exponent n, der einen Hinweis auf den Mechanismus der Keimbildung sowie deren geometrische Ordnung geben kann, zeigte keine signifikante Abh{\"a}ngigkeit von der Temperatur und vom Umgebungsmedium. Er ist dagegen zeitabh{\"a}ngig und f{\"a}llt mit zuneh-mender Alterungszeit, d.h. mit zunehmendem monoklinem Gehalt von ca. 4 auf 0,5 ab, was auf eine abnehmende Keimbildungsrate hindeutet. In Verbindung mit weiteren Untersu-chungen durch unabh{\"a}ngige und zum Teil tiefenaufl{\"o}sende Methoden wie GIXRD, NRA und Knoop-Mikroh{\"a}rte-Messungen l{\"a}sst sich der Alterungsmechanismus, bzw. sein zeitlicher und {\"o}rtlicher Ablauf, durch die drei Stadien A, B und C beschreiben: A 0-5 ma. \% m-ZrO2 Quasi-homogene Keimbildung an bevorzugten Orten wie Kornkan-ten und Kornecken (n≈4), Wassertransport wahrscheinlich via Korngrenzendiffusion, Aufh{\"a}rtung der Oberfl{\"a}che B 5-40 ma. \% m-ZrO2 Keimbildung an den Korngrenzfl{\"a}chen bis zur Keims{\"a}ttigung (n≈2), monokline Randschicht w{\"a}chst zeitlich linear, Wassertransport konvektiv {\"u}ber Mikrorisse, deutlicher H{\"a}rteverlust der Oberfl{\"a}che C ≥ 40 ma. \% m-ZrO2 Wachstum der monoklinen Kristallite von den Korngrenzfl{\"a}chen in die tetragonalen Kristallite unter starker Verzwillingung (n≈0,5), Abnahme der tetragonalen Kristallitgr{\"o}ße, starke Mikrorissbildung, dramatischer R{\"u}ckgang der Oberfl{\"a}chenh{\"a}rte Die Kristallitgr{\"o}ße der monoklinen Phase verbleibt im ATZ {\"u}ber alle drei Abschnitte bei 30 ±5 nm. Ein Anwachsen der Kristallite ist mechanische behindert. Kleinere monokline Kristallite sind im ATZ thermodynamisch instabil. Die Kristallitgr{\"o}ße der tetragonalen Phase f{\"a}llt in den Abschnitten A und B sehr langsam und in C sehr schnell bis auf 25 nm ab. Bei dieser Kristallitgr{\"o}ße ist die tetragonale Phase gegen{\"u}ber der monoklinen Phase thermody-namisch stabil. Diese residualen tetragonalen Kristallite weisen nach vollst{\"a}ndigem Reakti-onsablauf einem Anteil von 7 ma. \% auf. Der S{\"a}ttigungsgehalt der monoklinen Phase betrug in beiden Materialen unabh{\"a}ngig von der Temperatur bzw. dem Umgebungsmedium 75 \% der ZrO2-Phase. In Abschnitt C besitzt die residuale tetragonale Phase eine starke Orientierung. Dadurch wird die geometrische Bedingtheit der hydrothermal induzierten Phasenumwandlung ver-deutlicht. Die monokline Phase ist {\"u}ber den gesamten Alterungsprozess stark nach m(1 1  1) orientiert, was mit einer bevorzugten Umklapprichtung der c-Achse zur freien Oberfl{\"a}che hin verbunden ist. Mit Hilfe der tiefenaufgel{\"o}sten Phasenanalyse konnte die Wachstumsgeschwindigkeit der monoklinen Randschicht von der Oberfl{\"a}che in das Volumen untersucht werden. Die Ge-schwindigkeit des Schichtwachstums ist in Abschnitt B nicht zeit- und tiefenabh{\"a}ngig, son-dern konstant mit ausgepr{\"a}gtem ARRHENIUS-Verhalten (Temperaturabh{\"a}ngigkeit). Die Akti-vierungsenergie der Schichtwachstumsgeschwindigkeit km liegt in der gleichen Gr{\"o}ßenord-nung wie die der Transformationskonstante k. Die Umwandlungszone schreitet also mit konstanter Geschwindigkeit in das Volumen fort und hinterl{\"a}sst ein verzweigtes Mikro- und Nanoriss-System. FESEM-Aufnahmen best{\"a}tigen das Vorhandensein einer por{\"o}sen Randschicht, durch die das Wasser nahezu ungehindert eindringen kann. NRA Untersuchungen deuten in Stadium A auf Korngrenzendiffusion hin und best{\"a}tigen in Stadium B einen konvektiven Transport des Wassers an die Transformationszone. Eine Dif-fusion {\"u}ber Sauerstoffleerstellen im Gitter konnte anhand von Proben aus 8YSZ nicht nach-gewiesen werden. Dagegen kommt es in dem verzweigten Riss- und Porensystem in der gealterten Randschicht zum R{\"u}cktransport des Wassers an die Oberfl{\"a}che, sobald die Pro-ben aus der hydrothermalen Atmosph{\"a}re genommen, an Luft gelagert oder in die Hochva-kuumkammer der NRA-Messapparatur eingeschleust werden. Mikrostrukturelle Untersuchungen an eigens entwickelten Verschleißpaarungen zeigten nach 720000 Zyklen {\"a}hnliche Oberfl{\"a}cheneigenschaften wie im Alterungsstadium A. Man kann daher davon ausgehen, dass die Stadien B und C aus Stabilit{\"a}tsgr{\"u}nden in der tribolo-gischen Kontaktzone nicht existieren k{\"o}nnen und es dass sich im Falle einer gleichzeitigen, hydrothermalen und tribologischen Beanspruchung um einen station{\"a}ren Alterungs- und Verschleißprozess handelt. Durch quasiplastische Deformation der monoklinen und tetra-gonalen Kristallite wird die Verschleißrate und die Abriebpartikel bei einer hart /hart Paa-rung aus ATZ deutlich minimiert, so dass ATZ f{\"u}r die H{\"u}ftendoprothetik ein durchaus geeig-neten Werkstoff darstellt, der sich auf der Grundlage der in dieser Arbeit gewonnenen Daten {\"u}ber eine Imlantationsdauer von .mehr als 15 Jahre stabil verhalten kann.}, subject = {Dispersionskeramik}, language = {de} } @phdthesis{Posern, author = {Posern, Konrad}, title = {Untersuchungen von Magnesiumsulfat-Hydraten und Sulfat/Chlorid-Mischungen f{\"u}r die Eignung als Aktivstoff in Kompositmaterialien f{\"u}r die thermochemische W{\"a}rmespeicherung}, doi = {10.25643/bauhaus-universitaet.1678}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120704-16784}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {105}, abstract = {Die thermochemische W{\"a}rmespeicherung {\"u}ber reversible Salzhydratation stellt einen aussichtsreichen Weg zur Speicherung von Niedertemperaturw{\"a}rme, wie z.B. solarer Energie, dar. Untersuchungen an Magnesiumsulfat-Hydraten zeigen, dass das bei 130°C entw{\"a}sserte Magnesiumsulfat-Heptahydrat seinen thermodynamisch stabilen Endzustand w{\"a}hrend der Reaktion mit gasf{\"o}rmigem Wasser nicht wieder erreicht. Um diese kinetische Hemmung zu {\"u}berwinden und den Einfluss von unterschiedlichen Porenr{\"a}umen auf die Hydratation bzw. Sorption des Magnesiumsulfates zu charakterisieren, wurde das Magnesiumsulfat in Tr{\"a}germaterialien auf Basis offenporiger Gl{\"a}ser mit durchschnittlichen Porendurchmessern von 4 nm bis 1,4 µm eingebracht und diese Kompositmaterialien untersucht. Dabei ist festgestellt worden, dass jede salzbezogene Sorptionsw{\"a}rme im Porenraum h{\"o}her ist, als die des ungetr{\"a}gerten Salzes und mit kleiner werdendem Porenradius weiter zunimmt. Weiterhin wurden Teile des Magnesiumsulfates mit niedrig deliqueszierenden Salzen substituiert, um die Wasseraufnahme und somit die W{\"a}rmespeicherkapazit{\"a}t zu erh{\"o}hen. Dies stellt einen neuen Weg zur Herstellung von Kompositmaterialien dar, {\"u}ber den man Eigenschaften wie Deliqueszenzfeuchte und Desorptionstemperatur einstellen und an die Sorptionsbedingungen eines Speichers anpassen kann. Als niedrig deliqueszierende Salze wurden Magnesiumchlorid und Lithiumchlorid als Zus{\"a}tze untersucht, wobei ein Ansteigen der Sorptionsw{\"a}rme und Wasseraufnahme mit steigendem Chloridanteil festgestellt wurde. Aufgrund der geringeren Deliqueszenzfeuchte des Lithiumchlorides gegen{\"u}ber dem Magnesiumchlorid wurden bei gleichen Massenverh{\"a}ltnissen h{\"o}here Sorptionsw{\"a}rmen erzielt. Untersuchungen zu Zinksulfat in Verbindung mit Chloriden bescheinigen diesem Salz -speziell bei tieferen Entw{\"a}sserungstemperaturen- eine gute Eignung als Aktivstoff zur W{\"a}rmespeicherung. Zusammenfassend konnte festgestellt werden, dass sich die W{\"a}rmespeicherkapazit{\"a}ten {\"u}ber die Porengr{\"o}ße, in die das Salz eingebracht wird, und die gew{\"a}hlte Mischungszusammensetzung steuern lassen. Die gemessenen Sorptionsw{\"a}rmen erm{\"o}glichen insbesondere bei niedrigen Sorptionstemperaturen und hohen Luftfeuchtigkeiten den Schluss, dass die Verwendung von Salzmischungen als Aktivkomponente in Kompositmaterialien einen geeigneten Weg zur thermochemischen Speicherung solarer W{\"a}rme (≤130 °C) darstellt.}, subject = {Thermische Energiespeicherung}, language = {de} } @inproceedings{MotraDimmigOsburgHildebrand, author = {Motra, Hem Bahadur and Dimmig-Osburg, Andrea and Hildebrand, J{\"o}rg}, title = {UNCERTAINTY QUANTIFICATION IN CYCLIC CREEP PREDICTION OF CONCRETE}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2780}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27803}, pages = {18}, abstract = {This paper presents a methodology for uncertainty quantification in cyclic creep analysis. Several models- , namely BP model, Whaley and Neville model, modified MC90 for cyclic loading and modified Hyperbolic function for cyclic loading are used for uncertainty quantification. Three types of uncertainty are included in Uncertainty Quantification (UQ): (i) natural variability in loading and materials properties; (ii) data uncertainty due to measurement errors; and (iii) modelling uncertainty and errors during cyclic creep analysis. Due to the consideration of all type of uncertainties, a measure for the total variation of the model response is achieved. The study finds that the BP, modified Hyperbolic and modified MC90 are best performing models for cyclic creep prediction in that order. Further, global Sensitivity Analysis (SA) considering the uncorrelated and correlated parameters is used to quantify the contribution of each source of uncertainty to the overall prediction uncertainty and to identifying the important parameters. The error in determining the input quantities and model itself can produce significant changes in creep prediction values. The variability influence of input random quantities on the cyclic creep was studied by means of the stochastic uncertainty and sensitivity analysis namely the Gartner et al. method and Saltelli et al. method. All input imperfections were considered to be random quantities. The Latin Hypercube Sampling (LHS) numerical simulation method (Monte Carlo type method) was used. It has been found by the stochastic sensitivity analysis that the cyclic creep deformation variability is most sensitive to the Elastic modulus of concrete, compressive strength, mean stress, cyclic stress amplitude, number of cycle, in that order.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MalonekFalcaoCruz, author = {Malonek, Helmuth Robert and Falc{\~a}o, M. Irene and Cruz, Carla}, title = {TOTALLY REGULAR VARIABLES AND APPELL SEQUENCES IN HYPERCOMPLEX FUNCTION THEORY}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2775}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27751}, pages = {5}, abstract = {The aim of our contribution is to clarify the relation between totally regular variables and Appell sequences of hypercomplex holomorphic polynomials (sometimes simply called monogenic power-like functions) in Hypercomplex Function Theory. After their introduction in 2006 by two of the authors of this note on the occasion of the 17th IKM, the latter have been subject of investigations by different authors with different methods and in various contexts. The former concept, introduced by R. Delanghe in 1970 and later also studied by K. G{\"u}rlebeck in 1982 for the case of quaternions, has some obvious relationship with the latter, since it describes a set of linear hypercomplex holomorphic functions all power of which are also hypercomplex holomorphic. Due to the non-commutative nature of the underlying Clifford algebra, being totally regular variables or Appell sequences are not trivial properties as it is for the integer powers of the complex variable z=x+ iy. Simple examples show also, that not every totally regular variable and its powers form an Appell sequence and vice versa. Under some very natural normalization condition the set of all para-vector valued totally regular variables which are also Appell sequences will completely be characterized. In some sense the result can also be considered as an answer to a remark of K. Habetha in chapter 16: Function theory in algebras of the collection Complex analysis. Methods, trends, and applications, Akademie-Verlag Berlin, (Eds. E. Lanckau and W. Tutschke) 225-237 (1983) on the use of exact copies of several complex variables for the power series representation of any hypercomplex holomorphic function.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Ifesanya, author = {Ifesanya, Kunle}, title = {The Role of Government Agencies in Urban Housing Delivery in Lagos}, doi = {10.25643/bauhaus-universitaet.1761}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121115-17619}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {386}, abstract = {There is a continuous exacerbation of environmental problems in big cities of today's world, thereby, diminishing the quality of life in them. Of particular concern is the fact that today's megacities are evolving in the developing world without corresponding growth in the economy, infrastructure and other human development indices. As urban population continues to grow in these cities of the Global South, governing institutions are usually unable to keep pace with their social responsibilities, thus, making the issue of urban governance very critical. This is because effective and efficient urban governance is highly essential for the creation, strengthening and sustenance of governing institutions. Lagos, a mega-city of over 15.45 million people and the most populous metropolitan area on the African continent epitomizes the fundamental grave characteristics of the emerging megacities of the Global South, thereby, constituting an apt choice in understanding the emerging megacities of the next generation. Two out of every three Lagos residents live in slums and de-humanizing physical and social conditions. Many of them sleep, work, eat and cook under highway bridges, at the mercy of weather elements. This research, therefore, evaluated urban governance through housing administration in Africa's largest megacity. It examines the extent of housing problems in the city, the causal factors and the culpability of government agencies statutorily responsible for the provision, control and management of housing development in Lagos - the tenth largest city in the world. A representative geographic part of the city which manifests classic characteristics of slum life, listed by Mike Davis as the largest slum in Africa and the 6th largest in the world - Ajegunle - was adopted for case study. The research design combined rigorous literature search (desk research) with quantitative and, especially, qualitative approaches to data collection. The qualitative approach was more intensely adopted because government officials often respond to enquiries with 'official answers and data' which may not be reliable and the study had to rely on keen observation of physical traces, social interaction and personal investigation. The cross-sectional research method was adopted. Information was solicited from house-owners, building industry professionals, sociologists and officials of relevant government agencies, through research tools like questionnaires, interviews, focused group discussions and personal observations. The analysis and discussion of these field data, in conjunction with the information from the desk research gave a better understanding of the status-quo, which informed the recommendations proposed in the dissertation for mitigating the problems. The research discovered that many of the statutory housing agencies have the capacity to effectively discharge their responsibilities. However, it was also shown that corruption and abdication of responsibilities by the staff of these agencies constitute primary causes of the chasm between the anticipated lofty outcome from the laudable building regulations/bye-laws and the appalling reality. It also discovered that lack of political will and apathy on the part of successive Governments of Lagos State to the improvement of housing conditions of the poor masses are major causes of the housing debacle in Lagos. Several germane and realistic recommendations for redressing the situation were subsequently proffered. These include amongst others, the conduction of an accurate census for Lagos, in conjunction with credible international agencies, as a requisite basis for effective planning of any sort. The process of obtaining legal titles for land should also be made less cumbersome, while the housing administration process should be computerized; in order to reduce inter-personal contacts between applicants and government officials to the barest minimum, as a means of curbing the wide spread corruption in the system.}, subject = {Housing}, language = {en} } @inproceedings{LegatiukBockGuerlebeck, author = {Legatiuk, Dmitrii and Bock, Sebastian and G{\"u}rlebeck, Klaus}, title = {THE PROBLEM OF COUPLING BETWEEN ANALYTICAL SOLUTION AND FINITE ELEMENT METHOD}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2773}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27730}, pages = {11}, abstract = {This paper is focused on the first numerical tests for coupling between analytical solution and finite element method on the example of one problem of fracture mechanics. The calculations were done according to ideas proposed in [1]. The analytical solutions are constructed by using an orthogonal basis of holomorphic and anti-holomorphic functions. For coupling with finite element method the special elements are constructed by using the trigonometric interpolation theorem.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{KulchytskyyHorokhovGubanovetal., author = {Kulchytskyy, Artem and Horokhov, Yevgen and Gubanov, Vadim and Golikov, Alexandr}, title = {THE INFLUENCE OF THE LOCAL CONCAVITY ON THE FUNCTIONING OF BEARING SHELL OF HIGH-RISE CONSTRUCTION}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2770}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27701}, pages = {10}, abstract = {Areas with various defects and damages, which reduce carrying capacity, were examined in a study of metal chimneys. In this work, the influence of the local dimples on the function of metal chimneys was considered. Modeling tasks were completed in the software packages LIRA and ANSYS. Parameters were identified, which characterize the local dimples, and a numerical study of the influence of local dimples on the stress-strain state of shells of metal chimneys was conducted. A distribution field of circular and meridional tension was analyzed in a researched area. Zones of influence of dimples on the bearing cover of metal chimneys were investigated. The bearing capacities of high-rise structures with various dimple geometries and various cover parameters were determined with respect to specified areas of the trunk. Dependent relationships are represented graphically for the decrease in bearing capacity of a cover with respect to dimples. Diameter and thickness of covers of metal chimneys were constructed according to the resulting data.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Hitzer, author = {Hitzer, Eckhard}, title = {THE CLIFFORD FOURIER TRANSFORM IN REAL CLIFFORD ALGEBRAS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2765}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27652}, pages = {11}, abstract = {We briefly review and use the recent comprehensive research on the manifolds of square roots of -1 in real Clifford geometric algebras Cl(p,q) in order to construct the Clifford Fourier transform. Basically in the kernel of the complex Fourier transform the complex imaginary unit j is replaced by a square root of -1 in Cl(p,q). The Clifford Fourier transform (CFT) thus obtained generalizes previously known and applied CFTs, which replaced the complex imaginary unit j only by blades (usually pseudoscalars) squaring to -1. A major advantage of real Clifford algebra CFTs is their completely real geometric interpretation. We study (left and right) linearity of the CFT for constant multivector coefficients in Cl(p,q), translation (x-shift) and modulation (w -shift) properties, and signal dilations. We show an inversion theorem. We establish the CFT of vector differentials, partial derivatives, vector derivatives and spatial moments of the signal. We also derive Plancherel and Parseval identities as well as a general convolution theorem.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{DeebZabel, author = {Deeb, Maher and Zabel, Volkmar}, title = {THE APPLICATION OF POD CURVES TO DAMAGE DETECTION BASED ON PARTIAL MODELS- A NUMERICAL AND EXPERIMENTAL STUDY}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2761}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170306-27615}, pages = {18}, abstract = {Non-destructive techniques for damage detection became the focus of engineering interests in the last few years. However, applying these techniques to large complex structures like civil engineering buildings still has some limitations since these types of structures are unique and the methodologies often need a large number of specimens for reliable results. For this reason, cost and time can greatly influence the final results. Model Assisted Probability Of Detection (MAPOD) has taken its place among the ranks of damage identification techniques, especially with advances in computer capacity and modeling tools. Nevertheless, the essential condition for a successful MAPOD is having a reliable model in advance. This condition is opening the door for model assessment and model quality problems. In this work, an approach is proposed that uses Partial Models (PM) to compute the Probability Of damage Detection (POD). A simply supported beam, that can be structurally modified and tested under laboratory conditions, is taken as an example. The study includes both experimental and numerical investigations, the application of vibration-based damage detection approaches and a comparison of the results obtained based on tests and simulations. Eventually, a proposal for a methodology to assess the reliability and the robustness of the models is given.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Potthast, author = {Potthast, Martin}, title = {Technologies for Reusing Text from the Web}, doi = {10.25643/bauhaus-universitaet.1566}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120217-15663}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {Texts from the web can be reused individually or in large quantities. The former is called text reuse and the latter language reuse. We first present a comprehensive overview of the different ways in which text and language is reused today, and how exactly information retrieval technologies can be applied in this respect. The remainder of the thesis then deals with specific retrieval tasks. In general, our contributions consist of models and algorithms, their evaluation, and for that purpose, large-scale corpus construction. The thesis divides into two parts. The first part introduces technologies for text reuse detection, and our contributions are as follows: (1) A unified view of projecting-based and embedding-based fingerprinting for near-duplicate detection and the first time evaluation of fingerprint algorithms on Wikipedia revision histories as a new, large-scale corpus of near-duplicates. (2) A new retrieval model for the quantification of cross-language text similarity, which gets by without parallel corpora. We have evaluated the model in comparison to other models on many different pairs of languages. (3) An evaluation framework for text reuse and particularly plagiarism detectors, which consists of tailored detection performance measures and a large-scale corpus of automatically generated and manually written plagiarism cases. The latter have been obtained via crowdsourcing. This framework has been successfully applied to evaluate many different state-of-the-art plagiarism detection approaches within three international evaluation competitions. The second part introduces technologies that solve three retrieval tasks based on language reuse, and our contributions are as follows: (4) A new model for the comparison of textual and non-textual web items across media, which exploits web comments as a source of information about the topic of an item. In this connection, we identify web comments as a largely neglected information source and introduce the rationale of comment retrieval. (5) Two new algorithms for query segmentation, which exploit web n-grams and Wikipedia as a means of discerning the user intent of a keyword query. Moreover, we crowdsource a new corpus for the evaluation of query segmentation which surpasses existing corpora by two orders of magnitude. (6) A new writing assistance tool called Netspeak, which is a search engine for commonly used language. Netspeak indexes the web in the form of web n-grams as a source of writing examples and implements a wildcard query processor on top of it.}, subject = {Information Retrieval}, language = {en} } @inproceedings{GhorashiRabczukRodenasGarciaetal., author = {Ghorashi, Seyed Shahram and Rabczuk, Timon and R{\´o}denas Garc{\´i}a, Juan Jos{\´e} and Lahmer, Tom}, title = {T-SPLINE BASED XIGA FOR ADAPTIVE MODELING OF CRACKED BODIES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2763}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27637}, pages = {13}, abstract = {Safety operation of important civil structures such as bridges can be estimated by using fracture analysis. Since the analytical methods are not capable of solving many complicated engineering problems, numerical methods have been increasingly adopted. In this paper, a part of isotropic material which contains a crack is considered as a partial model and the proposed model quality is evaluated. EXtended IsoGeometric Analysis (XIGA) is a new developed numerical approach [1, 2] which benefits from advantages of its origins: eXtended Finite Element Method (XFEM) and IsoGeometric Analysis (IGA). It is capable of simulating crack propagation problems with no remeshing necessity and capturing singular field at the crack tip by using the crack tip enrichment functions. Also, exact representation of geometry is possible using only few elements. XIGA has also been successfully applied for fracture analysis of cracked orthotropic bodies [3] and for simulation of curved cracks [4]. XIGA applies NURBS functions for both geometry description and solution field approximation. The drawback of NURBS functions is that local refinement cannot be defined regarding that it is based on tensorproduct constructs unless multiple patches are used which has also some limitations. In this contribution, the XIGA is further developed to make the local refinement feasible by using Tspline basis functions. Adopting a recovery based error estimator in the proposed approach for evaluation of the model quality and performing the adaptive processes is in progress. Finally, some numerical examples with available analytical solutions are investigated by the developed scheme.}, subject = {Angewandte Informatik}, language = {en} } @masterthesis{Linda, type = {Bachelor Thesis}, author = {Linda, Luthardt}, title = {Systematik von Interaktionen zwischen mehreren Spielern in Social Network Spielen}, doi = {10.25643/bauhaus-universitaet.1661}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120530-16610}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {92}, abstract = {Herausarbeitung sozialer Interaktionen in Social Games und deren m{\"o}gliche Anwendung um fachspezifische Lehrinhalte,z.B. aus dem Bereich der Bauphysik zu vermitteln.}, subject = {Gesellschaftsspiel}, language = {de} } @inproceedings{LiuLeimbachHartmann, author = {Liu, Xiangqin and Leimbach, Robert and Hartmann, Dietrich}, title = {SYSTEM IDENTIFICATION OF A WIND TURBINE STRUCTURE USING ROBUST MODEL UPDATING STRATEGY}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2774}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27744}, pages = {11}, abstract = {This paper presents a robust model updating strategy for system identification of wind turbines. To control the updating parameters and to avoid ill-conditioning, the global sensitivity analysis using the elementary effects method is conducted. The formulation of the objective function is based on M¨uller-Slany's strategy for multi-criteria functions. As a simulationbased optimization, a simulation adapter is developed to interface the simulation software ANSYS and the locally developed optimization software MOPACK. Model updating is firstly tested on the beam model of the rotor blade. The defect between the numerical model and the reference has been markedly reduced by the process of model updating. The effect of model updating becomes more pronounced in the comparison of the measured and the numerical properties of the wind turbine model. The deviations of the frequencies of the updated model are rather small. The complete comparison including the free vibration modes by the modal assurance criteria shows the excellent coincidence of the modal parameters of the updated model with the ones from the measurements. By successful implementation of the model validation via model updating, the applicability and effectiveness of the solution concept has been demonstrated.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MiroHartmannSchanzetal., author = {Miro, Shorash and Hartmann, Dietrich and Schanz, Tom and Zarev, Veselin}, title = {SYSTEM IDENTIFICATION METHODS FOR GROUND MODELS IN MECHANIZED TUNNELING}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2777}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27771}, pages = {13}, abstract = {Due to the complex interactions between the ground, the driving machine, the lining tube and the built environment, the accurate assignment of in-situ system parameters for numerical simulation in mechanized tunneling is always subject to tremendous difficulties. However, the more accurate these parameters are, the more applicable the responses gained from computations will be. In particular, if the entire length of the tunnel lining is examined, then, the appropriate selection of various kinds of ground parameters is accountable for the success of a tunnel project and, more importantly, will prevent potential casualties. In this context, methods of system identification for the adaptation of numerical simulation of ground models are presented. Hereby, both deterministic and probabilistic approaches are considered for typical scenarios representing notable variations or changes in the ground model.}, subject = {Angewandte Informatik}, language = {en} } @article{JiangZhaoZhouetal., author = {Jiang, Jin-Wu and Zhao, Jun-Hua and Zhou, K. and Rabczuk, Timon}, title = {Superior thermal conductivity and extremely high mechanical strength in polyethylene chains from ab initio calculation}, series = {Journal of Applied Physics}, journal = {Journal of Applied Physics}, doi = {10.1063/1.4729489}, abstract = {The upper limit of the thermal conductivity and the mechanical strength are predicted for the polyethylene chain, by performing the ab initio calculation and applying the quantum mechanical non-equilibrium Green's function approach. Specially, there are two main findings from our calculation: (1) the thermal conductivity can reach a high value of 310 Wm-1 K-1 in a 100 nm polyethylene chain at room temperature and the thermal conductivity increases with the length of the chain; (2) the Young's modulus in the polyethylene chain is as high as 374.5 GPa, and the polyethylene chain can sustain 32.85\%±0.05\% (ultimate) strain before undergoing structural phase transition into gaseous ethylene.}, subject = {Angewandte Mathematik}, language = {en} } @inproceedings{MuellerLudwig, author = {M{\"u}ller, Matthias and Ludwig, Horst-Michael}, title = {Sulfatangriff magnesiumhaltiger W{\"a}sser auf M{\"o}rtel unterschiedlicher Zusammensetzung}, series = {Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar}, booktitle = {Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar}, editor = {Ludwig, Horst-Michael}, organization = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar}, isbn = {978-3-00-034075-8 (Bauhaus-Universit{\"a}tsverlag Weimar)}, doi = {10.25643/bauhaus-universitaet.4873}, pages = {489-496}, abstract = {Die besondere Aggressivit{\"a}t von hochkonzentrierten Magnesiumsulfatl{\"o}sungen bei Einwirkung auf Beton ist seit vielen Jahrzehnten bekannt. Neben dem Sulfat greift zus{\"a}tzlich auch das Magnesium den Zementstein an. Bei hohen L{\"o}sungskonzentrationen nimmt der Magnesiumangriff gegen{\"u}ber dem Sulfatangriff sogar eine dominante Rolle ein. Magnesiumgehalte unter 300 mg/l im Grundwasser gelten allerdings bislang als nicht angreifend. In Auslagerungs- und Laborversuchen wurde jedoch festgestellt, dass auch bei praxisrelevanten Magnesium- (<300 mg/l) und Sulfatgehalten (1.500 mg/l) das Magnesium zu einer deutlichen Versch{\"a}rfung des Sulfatangriffes bei niedrigen Temperaturen f{\"u}hrte. Diese Versch{\"a}rfung trat bei M{\"o}rteln und Betonen auf, bei denen der erh{\"o}hte Sulfatwiderstand durch einen teilweisen Zementersatz mit 20 \% Flugasche zu einem CEM II/A-LL erreicht werden sollte, gem{\"a}ß der Flugascheregelung nach EN 206-1/DIN 1045-2. Bei einem teilweisen Zementersatz durch 30 \% Flugasche konnte auch in magnesiumhaltigen Sulfatl{\"o}sungen eine deutliche Verbesserung des Sulfatwiderstandes erreicht werden. M{\"o}rtel mit HS-Zement als Bindemittel wiesen keinerlei Sch{\"a}den auf. Schadensverursachend war eine Kombination mehrerer Einfl{\"u}sse. Zum einen wurde der Sulfatwiderstand des Zement-Flugasche-Systems durch die unzureichende Reaktion der Flugasche infolge der niedrigen Lagerungstemperatur geschw{\"a}cht. Zum anderen konnte durch die Einwirkung des Magnesiums in der Randzone vermutlich eine Destabilisierung der C-S-H-Phasen erfolgen, wodurch die Thaumasitbildung an dieser Stelle forciert wurde. Zus{\"a}tzlich wurde durch den Portlanditverbrauch und die pH-Wert-Absenkung in der Randzone die puzzolanische Reaktion der Flugasche behindert.}, subject = {Beton}, language = {de} } @article{ThaiNguyenXuanNguyenThanhetal., author = {Thai, Chien H. and Nguyen-Xuan, Hung and Nguyen-Thanh, Nhon and Le, T.H. and Nguyen-Thoi, T. and Rabczuk, Timon}, title = {Static, free vibration and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach}, series = {International Journal for Numerical Methods in Engineering}, journal = {International Journal for Numerical Methods in Engineering}, doi = {10.1002/nme.4282}, pages = {571 -- 603}, abstract = {This paper presents a novel numerical procedure based on the framework of isogeometric analysis for static, free vibration, and buckling analysis of laminated composite plates using the first-order shear deformation theory. The isogeometric approach utilizes non-uniform rational B-splines to implement for the quadratic, cubic, and quartic elements. Shear locking problem still exists in the stiffness formulation, and hence, it can be significantly alleviated by a stabilization technique. Several numerical examples are presented to show the performance of the method, and the results obtained are compared with other available ones.}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Kegler, author = {Kegler, Harald}, title = {Spiel-R{\"a}ume - demokratisch basierte Landesplanung in Mitteldeutschland zwischen 1923 und 1932 sowie 1990 und 2000: Ein Beitrag zur Geschichte und Theorie strategischer, nicht-linearer Planung}, doi = {10.25643/bauhaus-universitaet.1700}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120914-17009}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {631}, abstract = {Die Arbeit behandelt die Geschichte der Landesplanung in Mitteldeutschland und besteht aus zwei Teilen: den Zeitr{\"a}umen der 1920 und 1990 Jahre. Dabei wird die Herausbildung der Landesplanung im mitteldeutschen Industriegebiet (um Merseburg) bzw. Th{\"u}ringen behandelt. Die kognitiven, institutionellen und planerischen Grundlagen der Landesplanung werden herausgearbeitet. Dabei spielen die paradigmatischen Grundlagen (Dezentralisierung) sowie die internationalen Beziehungen (insbes. zu den USA) eine besondere Rolle. Schließlich werden das Wirken von Schl{\"u}sselpersonen (u.a. Prager, Luthardt, Langen) und die Bez{\"u}ge zum Bauhaus untersucht. Die Analyse des Planwerks f{\"u}r Mitteldeutschland (1932) wird umfassend gef{\"u}hrt. In der Analyse der Entstehung k{\"o}nnen erste Ans{\"a}tze nicht-linearer Planung herausgearbeitet werden. Der zweite Teil der Arbeit widmet sich dem Industriellen Gartenreich, einem Projekt der Stiftung Bauhaus Dessau, das als Korrespondenzregion zur EXPO anerkannt worden war. Hier stehen das Gesamtkonzept, aber auch Projekte wie Ferropolis im Zentrum der Betrachtung. Die Analysen der Landesplanung werden in ihren Bez{\"u}gen zur gesellschaftlichen und konkret wirtschaftlichen Entwicklung behandelt. Schließlich werden beide Entwicklungsphasen und deren landesplanerischen Resultate {\"u}bergreifend bewertet und in einem Modell emergent-adaptiver Planung verortet und ein Ausblick auf die Entwicklung der Landesplanung als nicht-lineare Planung gegeben.}, subject = {Landesplanung}, language = {de} } @inproceedings{Krausshar, author = {Kraußhar, Rolf S{\"o}ren}, title = {SOME HARMONIC ANALYSIS ON M{\"O}BIUS STRIP DOMAINS AND THE KLEIN BOTTLE IN Rn}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2769}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27692}, pages = {10}, abstract = {The aim of this paper we discuss explicit series constructions for the fundamental solution of the Helmholtz operator on some important examples non-orientable conformally at manifolds. In the context of this paper we focus on higher dimensional generalizations of the Klein bottle which in turn generalize higher dimensional M{\"o}bius strips that we discussed in preceding works. We discuss some basic properties of pinor valued solutions to the Helmholtz equation on these manifolds.}, subject = {Angewandte Informatik}, language = {en} } @article{NatarajanChakrabortyThangaveletal., author = {Natarajan, S. and Chakraborty, S. and Thangavel, M. and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon}, title = {Size dependent free flexural vibration behavior of functionally graded nanoplates}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {74 -- 80}, abstract = {Size dependent free flexural vibration behavior of functionally graded nanoplates}, subject = {Angewandte Mathematik}, language = {en} } @periodical{OPUS4-4848, title = {Schwerpunkt Kollektiv}, volume = {2012}, number = {3.2012, Heft 2}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-3-2}, pages = {208}, abstract = {Die neuere und h{\"o}chst produktive Konjunktur des »Kollektiv«-Begriffs in Soziologie und Kulturtheorie, wie sie sich insbesondere durch die Ent-faltung der Akteur-Netzwerk-Theorie herausgebildet hat, ist zun{\"a}chst durch vier miteinander zusammenh{\"a}ngende Eigent{\"u}mlichkeiten gekennzeichnet. Erstens bezeichnet das »Kollektiv« in diesem Sinne vor allem anderen eine Ansammlung von Entit{\"a}ten zu einem als Ganzem operativen, m{\"o}glicherweise sogar handlungs- und reflexionsf{\"a}higen Komplex. Die Operationen werden dabei erstens im »Kollektiv« und durch das »Kollektiv« ausgef{\"u}hrt, gleichzeitig jedoch sind sie es, die das »Kollektiv« {\"u}berhaupt erst aufspannen und relationieren und so zusammenhalten und reproduzieren bzw. variieren. Das Besondere daran ist zweitens - und das unterscheidet den »Kollektiv«-Begriff etwa von demjenigen des Systems -, dass es keine Subsumption der beteiligten Entit{\"a}ten unter das kollektive Gebilde gibt. Die Operationsf{\"a}higkeit und der Zusammenschluss f{\"u}hren weder zu einem Aufgehen des Einzelnen im Ganzen, noch zerf{\"a}llt im R{\"u}ckfall das Ganze in eine bloße Gesamtheit aufsummierbarer Teile und Effekte. Kurz: Das »Kollektiv« kann nicht {\"u}ber die Beziehung von Ganzem und Teil definiert und schon gar nicht nach einer dieser beiden Seiten hin aufgel{\"o}st werden. Drittens, und das ist der vermutlich plakativste Zug des neuen »Kollektiv«-Begriffs, umfasst das »Kollektiv« Entit{\"a}ten v{\"o}llig heterogener Art, genauer: Es bringt solche Gegebenheiten zusammen, die nach klassischer ontologischer Tradition verschiedenen Seinsbezirken zugerechnet worden w{\"a}ren. Das sind vor allem die ber{\"u}hmten menschlichen und nichtmenschlichen Akteure Bruno Latours, das sind also Personen und Artefakte, Kultur- und Naturdinge, Intelligibles und Sensibles, Reflexives und Irreflexives, Technisches und {\"A}sthetisches, Bilder und Objekte oder sogar Materielles und Immaterielles wie Geister, G{\"o}tter und Ahnen, so bei Descola oder Gell. Und viertens schließlich ist der »Kollektiv«-Begriff speziell ein Kontrastbegriff , der innerhalb der »neuen Soziologie« der Akteur-Netzwerk-Theorie an die Stelle des Gesellschaftsbegriff s treten soll, eben um dessen humanozentrische Pr{\"a}gung einerseits und seine subsumptive, generalisierende und anti-partikulare Tradition andererseits abzustreifen.}, subject = {Medienwissenschaft}, language = {de} } @periodical{OPUS4-4847, title = {Schwerpunkt Entwerfen}, volume = {2012}, number = {3.2012, Heft 1}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-3-1}, pages = {225}, abstract = {Entwerfen ist ein {\"a}usserst unscharfer Begriff. Mit ihm kann je nach Kontext ebenso Zeichnen, Planen, Modellieren, Projektieren oder Darstellen gemeint sein wie Erfi nden, Entwickeln, Konzipieren, Komponieren und {\"a}hnliches. Wenn Architekten vom Entwurf reden, verwenden sie das Wort meist in einer Bedeutung, die auf den kunsttheoretischen Diskurs zur{\"u}ckgeht, der im Florenz des 16. Jahrhunderts entstanden ist: Entwurf als disegno. Dementsprechend konnte Entwerfen in der kunsthermeneutischen Rezeption schließlich mit dem ›k{\"u}nstlerischen Schaff ensprozess‹ selbst synonym werden. Im Entwerfen meint man der geistigen Verm{\"o}gen und Prozesse im k{\"u}nstlerischen Subjekt habhaft zu werden. An diese Tradition soll hier bewusst nicht angekn{\"u}pft werden. Um das Entwerfen als Kulturtechnik in seiner historischen Bedingtheit zu beschreiben, muss es aus dem anthropozentrischen Ursprung herausger{\"u}ckt werden, an den es der florentinische kunsttheoretische Diskurs versetzt hat. Statt das Entwerfen als fundamentalen Akt k{\"u}nstlerischen Schaff ens zu begreifen und als anthropologische Konstante der Geschichte zu entziehen, w{\"a}re eben diese Konzeption als historisches Resultat von diskursiven, technischen und institutionellen Praktiken zu befragen.}, subject = {Medienwissenschaft}, language = {de} } @inproceedings{MusialUbysz, author = {Musial, Michal and Ubysz, Andrzej}, title = {ROTATIONAL DUCTILITY OF CRACK IN STATIC AND DYNAMIC CALCULATIONS OF REINFORCED CONCRETE BAR STRUCTURES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2781}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27813}, pages = {9}, abstract = {In this paper experimental studies and numerical analysis carried out on reinforced concrete beam are partially reported. They aimed to apply the rigid finite element method to calculations for reinforced concrete beams using discrete crack model. Hence rotational ductility resulting from crack occurrence had to be determined. A relationship for calculating it in static equilibrium was proposed. Laboratory experiments proved that dynamic ductility is considerably smaller. Therefore scaling of the empirical parameter was carried out. Consequently a formula for its value depending on reinforcement ratio was obtained.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Scheiber, author = {Scheiber, Frank}, title = {ROBUSTNESS IN CIVIL ENGINEERING - INFLUENCES OF THE STRUCTURAL MODEL ON THE EVALUATION OF THE STRUCTURAL ROBUSTNESS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2784}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27845}, pages = {13}, abstract = {The topic of structural robustness is covered extensively in current literature in structural engineering. A few evaluation methods already exist. Since these methods are based on different evaluation approaches, the comparison is difficult. But all the approaches have one in common, they need a structural model which represents the structure to be evaluated. As the structural model is the basis of the robustness evaluation, there is the question if the quality of the chosen structural model is influencing the estimation of the structural robustness index. This paper shows what robustness in structural engineering means and gives an overview of existing assessment methods. One is the reliability based robustness index, which uses the reliability indices of a intact and a damaged structure. The second one is the risk based robustness index, which estimates the structural robustness by the usage of direct and indirect risk. The paper describes how these approaches for the evaluation of structural robustness works and which parameters will be used. Since both approaches needs a structural model for the estimation of the structural behavior and the probability of failure, it is necessary to think about the quality of the chosen structural model. Nevertheless, the chosen model has to represent the structure, the input factors and reflect the damages which occur. On the example of two different model qualities, it will be shown, that the model choice is really influencing the quality of the robustness index.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Krishnamurthy, author = {Krishnamurthy, Sukanya}, title = {Reading Architecture - Remembering - Forgetting interplay: Development of a Framework to Study Urban and Object Level Cases}, doi = {10.25643/bauhaus-universitaet.1802}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121219-18025}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This thesis explores how architecture aids in the performance of open-ended narratives by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architecture old and new stems from specific cultural and social forms, and is dictated by processes of remembering and forgetting. It is through interaction (between inhabitant and object) that architecture is given innate meanings within an urban environment that makes its role in the interplay one of investigative interest. To enable the study of this performance, I develop a framework based on various theoretical paradigms to investigate three broad questions: 1) How does one study the performance of memory and forgetting through architecture in dynamic urban landscapes? 2) Is there a way to identify markers and elements within the urban environment that enable such a study? 3) What is the role that urban form plays within this framework and does the transformation of urban form imply the transformation of memory and forgetting? The developed framework is applied to a macro (an urban level study of Bangalore, India) and micro level study (a singular or object level study of Stari Most/ Old Bridge, Mostar, BiH), to analyse the performance of remembering and forgetting in various urban spheres through interaction with architecture and form. By means of observations, archival research, qualitative mapping, drawings and narrative interviews, the study demonstrates that certain sites and characteristics of architecture enable the performance of remembering and the questioning of forgetting by embodying features that support this act. Combining theory and empirical studies this thesis is an attempt to elucidate on the processes through which remembering and forgetting is initiated and experienced through architectural forms. The thesis argues for recognising the potential of architecture as one that embodies and supports the performance of memory and forgetting, by acting as an auratic contact zone.}, subject = {Stadtlandschaft}, language = {en} } @inproceedings{Keitel, author = {Keitel, Holger}, title = {QUANTIFYING THE QUALITY OF PARTIAL MODEL COUPLING AND ITS EFFECT ON THE SIMULATED STRUCTURAL BEHAVIOR}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2768}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27689}, pages = {11}, abstract = {The process of analysis and design in structural engineering requires the consideration of different partial models, for example loading, structural materials, structural elements, and analysis types. The various partial models are combined by coupling several of their components. Due to the large number of available partial models describing similar phenomena, many different model combinations are possible to simulate the same aspects of a structure. The challenging task of an engineer is to select a model combination that ensures a sufficient, reliable prognosis. In order to achieve this reliable prognosis of the overall structural behavior, a high individual quality of the partial models and an adequate coupling of the partial models is required. Several methodologies have been proposed to evaluate the quality of partial models for their intended application, but a detailed study of the coupling quality is still lacking. This paper proposes a new approach to assess the coupling quality of partial models in a quantitative manner. The approach is based on the consistency of the coupled data and applies for uni- and bidirectional coupled partial models. Furthermore, the influence of the coupling quality on the output quantities of the partial models is considered. The functionality of the algorithm and the effect of the coupling quality are demonstrated using an example of coupled partial models in structural engineering.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Nikulla, author = {Nikulla, Susanne}, title = {Quality assessment of kinematical models by means of global and goal-oriented error estimation techniques}, publisher = {Verlag der Bauhaus-Universit{\"a}t Weimar}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.1616}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120419-16161}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {117}, abstract = {Methods for model quality assessment are aiming to find the most appropriate model with respect to accuracy and computational effort for a structural system under investigation. Model error estimation techniques can be applied for this purpose when kinematical models are investigated. They are counted among the class of white box models, which means that the model hierarchy and therewith the best model is known. This thesis gives an overview of discretisation error estimators. Deduced from these, methods for model error estimation are presented. Their general goal is to make a prediction of the inaccuracies that are introduced using the simpler model without knowing the solution of a more complex model. This information can be used to steer an adaptive process. Techniques for linear and non-linear problems as well as global and goal-oriented errors are introduced. The estimation of the error in local quantities is realised by solving a dual problem, which serves as a weight for the primal error. So far, such techniques have mainly been applied in material modelling and for dimensional adaptivity. Within the scope of this thesis, available model error estimators are adapted for an application to kinematical models. Their applicability is tested regarding the question of whether a geometrical non-linear calculation is necessary or not. The analysis is limited to non-linear estimators due to the structure of the underlying differential equations. These methods often involve simplification, e.g linearisations. It is investigated to which extent such assumptions lead to meaningful results, when applied to kinematical models.}, subject = {Model quality, Model error estimation, Kinematical model, Geometric non-linearity, Finite Element method}, language = {en} } @phdthesis{Stein, author = {Stein, Peter}, title = {Procedurally generated models for Isogeometric Analysis}, publisher = {Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-86068-488-7}, doi = {10.25643/bauhaus-universitaet.1848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130212-18483}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {82}, abstract = {Increasingly powerful hard- and software allows for the numerical simulation of complex physical phenomena with high levels of detail. In light of this development the definition of numerical models for the Finite Element Method (FEM) has become the bottleneck in the simulation process. Characteristic features of the model generation are large manual efforts and a de-coupling of geometric and numerical model. In the highly probable case of design revisions all steps of model preprocessing and mesh generation have to be repeated. This includes the idealization and approximation of a geometric model as well as the definition of boundary conditions and model parameters. Design variants leading to more resource-efficient structures might hence be disregarded due to limited budgets and constrained time frames. A potential solution to above problem is given with the concept of Isogeometric Analysis (IGA). Core idea of this method is to directly employ a geometric model for numerical simulations, which allows to circumvent model transformations and the accompanying data losses. Basis for this method are geometric models described in terms of Non-uniform rational B-Splines (NURBS). This class of piecewise continuous rational polynomial functions is ubiquitous in computer graphics and Computer-Aided Design (CAD). It allows the description of a wide range of geometries using a compact mathematical representation. The shape of an object thereby results from the interpolation of a set of control points by means of the NURBS functions, allowing efficient representations for curves, surfaces and solid bodies alike. Existing software applications, however, only support the modeling and manipulation of the former two. The description of three-dimensional solid bodies consequently requires significant manual effort, thus essentially forbidding the setup of complex models. This thesis proposes a procedural approach for the generation of volumetric NURBS models. That is, a model is not described in terms of its data structures but as a sequence of modeling operations applied to a simple initial shape. In a sense this describes the "evolution" of the geometric model under the sequence of operations. In order to adapt this concept to NURBS geometries, only a compact set of commands is necessary which, in turn, can be adapted from existing algorithms. A model then can be treated in terms of interpretable model parameters. This leads to an abstraction from its data structures and model variants can be set up by variation of the governing parameters. The proposed concept complements existing template modeling approaches: templates can not only be defined in terms of modeling commands but can also serve as input geometry for said operations. Such templates, arranged in a nested hierarchy, provide an elegant model representation. They offer adaptivity on each tier of the model hierarchy and allow to create complex models from only few model parameters. This is demonstrated for volumetric fluid domains used in the simulation of vertical-axis wind turbines. Starting from a template representation of airfoil cross-sections, the complete "negative space" around the rotor blades can be described by a small set of model parameters, and model variants can be set up in a fraction of a second. NURBS models offer a high geometric flexibility, allowing to represent a given shape in different ways. Different model instances can exhibit varying suitability for numerical analyses. For their assessment, Finite Element mesh quality metrics are regarded. The considered metrics are based on purely geometric criteria and allow to identify model degenerations commonly used to achieve certain geometric features. They can be used to decide upon model adaptions and provide a measure for their efficacy. Unfortunately, they do not reveal a relation between mesh distortion and ill-conditioning of the equation systems resulting from the numerical model.}, subject = {NURBS}, language = {en} } @article{ChauDinhZiLeeetal., author = {Chau-Dinh, T. and Zi, Goangseup and Lee, P.S. and Song, Jeong-Hoon and Rabczuk, Timon}, title = {Phantom-node method for shell models with arbitrary cracks}, series = {Computers \& Structures}, journal = {Computers \& Structures}, doi = {10.1016/j.compstruc.2011.10.021}, abstract = {A phantom-node method is developed for three-node shell elements to describe cracks. This method can treat arbitrary cracks independently of the mesh. The crack may cut elements completely or partially. Elements are overlapped on the position of the crack, and they are partially integrated to implement the discontinuous displacement across the crack. To consider the element containing a crack tip, a new kinematical relation between the overlapped elements is developed. There is no enrichment function for the discontinuous displacement field. Several numerical examples are presented to illustrate the proposed method.}, subject = {Angewandte Mathematik}, language = {en} } @incollection{Lucius, author = {Lucius, Wulf D. von}, title = {Perspektiven f{\"u}r Verlage im digitalen Zeitalter}, series = {Alles digital? : E-Books in Studium und Lehre}, booktitle = {Alles digital? : E-Books in Studium und Lehre}, publisher = {Verlag der Bauhaus-Universit{\"a}t}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.1581}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120327-15813}, pages = {32 -- 41}, abstract = {Beitrag w{\"a}hrend der Weimarer EDOC-Tage 2011}, subject = {Verlag}, language = {de} } @inproceedings{LeMoraisSproessig, author = {Le, Hoai Thu and Morais, Joao and Spr{\"o}ßig, Wolfgang}, title = {ORTHOGONAL DECOMPOSITIONS AND THEIR APPLICATIONS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2772}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27729}, pages = {10}, abstract = {It is well known that complex quaternion analysis plays an important role in the study of higher order boundary value problems of mathematical physics. Following the ideas given for real quaternion analysis, the paper deals with certain orthogonal decompositions of the complex quaternion Hilbert space into its subspaces of null solutions of Dirac type operator with an arbitrary complex potential. We then apply them to consider related boundary value problems, and to prove the existence and uniqueness as well as the explicit representation formulae of the underlying solutions.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MuellerEhrhardtLudwig, author = {M{\"u}ller, Matthias and Ehrhardt, Dirk and Ludwig, Horst-Michael}, title = {Optimierung der Nachbehandlung von Waschbetonoberfl{\"a}chen}, series = {Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar}, booktitle = {Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar}, editor = {Ludwig, Horst-Michael}, organization = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar}, isbn = {978-3-00-034075-8}, doi = {10.25643/bauhaus-universitaet.4872}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240226-48722}, pages = {794-781}, abstract = {Der Nachbehandlung eines Fahrbahndeckenbetons kommt zum Erzielen eines hohen Frost-Tausalz-Widerstandes der fertigen Betondecke eine besondere Bedeutung zu. Bei der Waschbetonbauweise erfolgt die Nachbehandlung in mehreren Schritten. Eine erste Nachbehandlung gew{\"a}hrleistet den Verdunstungsschutz des Betons bis zum Zeitpunkt des Ausb{\"u}rstens des verz{\"o}gerten Oberfl{\"a}chenm{\"o}rtels. Daran schließt sich die zweite Nachbehandlung an, in der Regel durch Aufspr{\"u}hen eines fl{\"u}ssigen Nachbehandlungsmittels. Der zweite Nachbehandlungsschritt ist entscheidend f{\"u}r den Frost-Tausalz-Widerstand der Betondecke. Im Rahmen eines Forschungsprojektes wurde daher untersucht, inwiefern durch eine Optimierung der zweiten Nachbehandlung der Frost-Tausalz-Widerstand von Waschbetonoberfl{\"a}chen erh{\"o}ht werden kann, insbesondere bei Verwendung h{\"u}ttensandhaltiger Zemente. Schon durch eine einmalige Nassnachbehandlung wurde eine deutlich h{\"o}herer Widerstand der Waschbetons gegen Frost-Tausalz-Angriff erzielt.}, subject = {Beton}, language = {de} } @article{TalebiSamaniegoSamaniegoetal., author = {Talebi, Hossein and Samaniego, C. and Samaniego, Esteban and Rabczuk, Timon}, title = {On the numerical stability and mass-lumping schemes for explicit enriched meshfree methods}, series = {International Journal for Numerical Methods in Engineering}, journal = {International Journal for Numerical Methods in Engineering}, doi = {10.1002/nme.3275}, pages = {1009 -- 1027}, abstract = {Meshfree methods (MMs) such as the element free Galerkin (EFG)method have gained popularity because of some advantages over other numerical methods such as the finite element method (FEM). A group of problems that have attracted a great deal of attention from the EFG method community includes the treatment of large deformations and dealing with strong discontinuities such as cracks. One efficient solution to model cracks is adding special enrichment functions to the standard shape functions such as extended FEM, within the FEM context, and the cracking particles method, based on EFG method. It is well known that explicit time integration in dynamic applications is conditionally stable. Furthermore, in enriched methods, the critical time step may tend to very small values leading to computationally expensive simulations. In this work, we study the stability of enriched MMs and propose two mass-lumping strategies. Then we show that the critical time step for enriched MMs based on lumped mass matrices is of the same order as the critical time step of MMs without enrichment. Moreover, we show that, in contrast to extended FEM, even with a consistent mass matrix, the critical time step does not vanish even when the crack directly crosses a node.}, subject = {Angewandte Mathematik}, language = {en} } @inproceedings{NguyenGuerlebeck, author = {Nguyen, Manh Hung and G{\"u}rlebeck, Klaus}, title = {ON M-CONFORMAL MAPPINGS AND GEOMETRIC PROPERTIES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2783}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27833}, pages = {7}, abstract = {Monogenic functions play a role in quaternion analysis similarly to that of holomorphic functions in complex analysis. A holomorphic function with nonvanishing complex derivative is a conformal mapping. It is well-known that in Rn+1, n ≥ 2 the set of conformal mappings is restricted to the set of M{\"o}bius transformations only and that the M{\"o}bius transformations are not monogenic. The paper deals with a locally geometric mapping property of a subset of monogenic functions with nonvanishing hypercomplex derivatives (named M-conformal mappings). It is proved that M-conformal mappings orthogonal to all monogenic constants admit a certain change of solid angles and vice versa, that change can characterize such mappings. In addition, we determine planes in which those mappings behave like conformal mappings in the complex plane.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Simsek, author = {Simsek, Yilmaz}, title = {ON INTERPOLATION FUNCTION OF THE BERNSTEIN POLYNOMIALS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2786}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27867}, pages = {8}, abstract = {The Bernstein polynomials are used for important applications in many branches of Mathematics and the other sciences, for instance, approximation theory, probability theory, statistic theory, num- ber theory, the solution of the di\ierential equations, numerical analysis, constructing Bezier curves, q-calculus, operator theory and applications in computer graphics. The Bernstein polynomials are used to construct Bezier curves. Bezier was an engineer with the Renault car company and set out in the early 1960's to develop a curve formulation which would lend itself to shape design. Engineers may …nd it most understandable to think of Bezier curves in terms of the center of mass of a set of point masses. Therefore, in this paper, we study on generating functions and functional equations for these polynomials. By applying these functions, we investigate interpolation function and many properties of these polynomials.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{GonzalezCalvet, author = {Gonzalez Calvet, Ramon}, title = {NEW FOUNDATIONS FOR GEOMETRIC ALGEBRA}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2764}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27644}, pages = {12}, abstract = {New foundations for geometric algebra are proposed based upon the existing isomorphisms between geometric and matrix algebras. Each geometric algebra always has a faithful real matrix representation with a periodicity of 8. On the other hand, each matrix algebra is always embedded in a geometric algebra of a convenient dimension. The geometric product is also isomorphic to the matrix product, and many vector transformations such as rotations, axial symmetries and Lorentz transformations can be written in a form isomorphic to a similarity transformation of matrices. We collect the idea that Dirac applied to develop the relativistic electron equation when he took a basis of matrices for the geometric algebra instead of a basis of geometric vectors. Of course, this way of understanding the geometric algebra requires new definitions: the geometric vector space is defined as the algebraic subspace that generates the rest of the matrix algebra by addition and multiplication; isometries are simply defined as the similarity transformations of matrices as shown above, and finally the norm of any element of the geometric algebra is defined as the nth root of the determinant of its representative matrix of order n×n. The main idea of this proposal is an arithmetic point of view consisting of reversing the roles of matrix and geometric algebras in the sense that geometric algebra is a way of accessing, working and understanding the most fundamental conception of matrix algebra as the algebra of transformations of multilinear quantities.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MarzbanSchwarz, author = {Marzban, Samira and Schwarz, Jochen}, title = {MODEL QUALITY EVALUATION OF COUPLED RC FRAME-WALL SYSTEMS FOR GLOBAL DAMAGE ASSESSMENT}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2776}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27769}, pages = {14}, abstract = {Civil engineers take advantage of models to design reliable structures. In order to fulfill the design goal with a certain amount of confidence, the utilized models should be able to predict the probable structural behavior under the expected loading schemes. Therefore, a major challenge is to find models which provide less uncertain and more robust responses. The problem gets even twofold when the model to be studied is a global model comprised of different interacting partial models. This study aims at model quality evaluation of global models with a focus on frame-wall systems as the case study. The paper, presents the results of the first step taken toward accomplishing this goal. To start the model quality evaluation of the global frame-wall system, the main element (i.e. the wall) was studied through nonlinear static and dynamic analysis using two different modeling approaches. The two selected models included the fiber section model and the Multiple-Vertical-Line-Element-Model (MVLEM). The influence of the wall aspect ratio (H=L) and the axial load on the response of the models was studied. The results from nonlinear static and dynamic analysis of both models are presented and compared. The models resulted in quite different responses in the range of low aspect ratio walls under large axial loads due to different contribution of the shear deformations to the top displacement. In the studied cases, the results implied that careful attention should be paid to the model quality evaluation of the wall models specifically when they are supposed to be coupled to other partial models such as a moment frame or a soil-footing substructure which their response is sensitive to shear deformations. In this case, even a high quality wall model would not result in a high quality coupled system since it fails to interact properly with the rest of the system.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MusialUbyszUlatowski, author = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr}, title = {MODEL DESCRIBING STATIC AND DYNAMIC DISPLACEMENTS OF SILOS WALL DURING THE FLOW OF LOOSE MATERIAL}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2789}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27896}, pages = {16}, abstract = {Correct evaluation of wall displacements is a key matter when designing silos. This issue is important from both the standpoint of design engineer (load-bearing capacity of structures) and end-consumer (durability of structures). Commonplace methods of silo design mainly focus on satisfying limit states of load-bearing capacity. Current standards fail to specify methods of dynamic displacements analysis. Measurements of stressacting on silo walls prove that the actual stress is sum of static and dynamic stresses. Janssen came up with differential equation describing state of static equilibrium in cross-section of a silo. By solving the equation static stress of granular solid on silo walls can be determined. Equations of motion were determined from equilibrium equations of feature objects. General solution, describing dynamic stresses was presented as parametric model. This paper presents particular integrals of differential equation, which enable analysing displacements and vibrations for different rigidities of silo walls, types of granular solid and its flow rate.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{AbbasMorgenthal, author = {Abbas, Tajammal and Morgenthal, Guido}, title = {Model combinations for assessing the flutter stability of suspension bridges}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2757}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170306-27574}, pages = {11}, abstract = {Long-span cable supported bridges are prone to aerodynamic instabilities caused by wind and this phenomenon is usually a major design criterion. If the wind speed exceeds the critical flutter speed of the bridge, this constitutes an Ultimate Limit State. The prediction of the flutter boundary therefore requires accurate and robust models. This paper aims at studying various combinations of models to predict the flutter phenomenon. Since flutter is a coupling of aerodynamic forcing with a structural dynamics problem, different types and classes of models can be combined to study the interaction. Here, both numerical approaches and analytical models are utilised and coupled in different ways to assess the prediction quality of the hybrid model. Models for aerodynamic forces employed are the analytical Theodorsen expressions for the motion-enduced aerodynamic forces of a flat plate and Scanlan derivatives as a Meta model. Further, Computational Fluid Dynamics (CFD) simulations using the Vortex Particle Method (VPM) were used to cover numerical models. The structural representations were dimensionally reduced to two degree of freedom section models calibrated from global models as well as a fully three-dimensional Finite Element (FE) model. A two degree of freedom system was analysed analytically as well as numerically. Generally, all models were able to predict the flutter phenomenon and relatively close agreement was found for the particular bridge. In conclusion, the model choice for a given practical analysis scenario will be discussed in the context of the analysis findings.}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{PhungThi, author = {Phung Thi, Thu Ha}, title = {Metakaolin as an Additive in Composite Cement}, publisher = {F. A. Finger-Institut f{\"u}r Baustoffkunde}, address = {Weimar}, isbn = {978-3-00-042655-1}, doi = {10.25643/bauhaus-universitaet.1976}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130705-19764}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {119}, abstract = {Metakaolin made from kaolin is used around the world but rarely in Vietnam where abundant deposits of kaolin is found. The first studies of producing metakaolin were conducted with high quality Vietnamese kaolins. The results showed the potential to produce metakaolin, and its effect has on strength development of mortars and concretes. However, utilisation of a low quality kaolin for producing Vietnamese metakaolin has not been studied so far. The objectives of this study were to produce a good quality metakaolin made from low quality Vietnamese kaolin and to facilitate the utilisation of Vietnamese metakaolin in composite cements. In order to reach such goals, the optimal thermal conversion of Vietnamese kaolin into metakaolin was carried out by many investigations, and as such the optimal conversion is found using the analysis results of DSC/TGA, XRD and CSI. During the calcination in a range of 500 - 800 oC lasting for 1 - 5 hours, the characterisation of calcinated kaolin was also monitored for mass loss, BET surface, PSD, density as well as the presence of the residual water. It is found to have a well correlation between residual water and BET surface. The pozzolanic activity of metakaolin was tested by various methods regarding to the saturated lime method, mCh and TGA-CaO method. The results of the study showed which method is the most suitable one to characterise the real activity of metakaolin and can reach the greatest agreement with concrete performance. Furthermore, the pozzolanic activity results tested using methods were also analysed and compared to each other with respect to the BET surface. The properties of Vietnam metakaolin was established using investigations on water demand, setting time, spread-flowability, and strength. It is concluded that depending on the intended use of composite cement and weather conditions of cure, each Vietnamese metakaolin can be used appropriately to produce (1) a composite cement with a low water demand (2) a high strength of composite cement (3) a composite cement that aims to reduce CO2 emissions and to improve economics of cement products (4) a high performance mortar. The durability of metakaolin mortar was tested to find the needed metakaolin content against ASR, sulfat and sulfuric acid attacks successfully.}, subject = {metakaolin}, language = {en} } @inproceedings{Eriksson, author = {Eriksson, Sirkka-Liisa}, title = {MEAN VALUE PROPERTIES FOR THE WEINSTEIN EQUATION AND MODIFIED DIRAC OPERATORS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2762}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27621}, pages = {16}, abstract = {We study the Weinstein equation u on the upper half space R3+. The Weinstein equation is connected to the axially symmetric potentials. We compute solutions of the Weinstein equation depending on the hyperbolic distance and x2. These results imply the explicit mean value properties. We also compute the fundamental solution. The main tools are the hyperbolic metric and its invariance properties.}, subject = {Angewandte Informatik}, language = {en} } @incollection{MaierRichter, author = {Maier, Matthias and Richter, Nancy}, title = {Lesen - Schreiben - Apparate}, series = {Alles digital? : E-Books in Studium und Lehre}, booktitle = {Alles digital? : E-Books in Studium und Lehre}, publisher = {Verlag der Bauhaus-Universit{\"a}t}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.1580}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120316-15800}, pages = {12 -- 29}, abstract = {Beitrag w{\"a}hrend der Weimarer EDOC-Tage 2011}, subject = {Elektronisches Buch}, language = {de} } @book{KoenigSchneiderKnecht, author = {K{\"o}nig, Reinhard and Schneider, Sven and Knecht, Katja}, title = {KREMLAS: Entwicklung einer kreativen evolution{\"a}ren Entwurfsmethode f{\"u}r Layoutprobleme in Architektur und St{\"a}dtebau}, editor = {K{\"o}nig, Reinhard and Donath, Dirk and Petzold, Frank}, publisher = {Verlag der Bauhaus-Universit{\"a}t Weimar}, address = {Weimar}, isbn = {978-3-86068-471-9}, doi = {10.25643/bauhaus-universitaet.1650}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120509-16504}, pages = {211}, abstract = {Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen L{\"o}sung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung r{\"a}umlicher Elemente, z.B. von Parzellen, Geb{\"a}uden, R{\"a}umen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft gef{\"o}rderten Forschungsprojekts entstanden.}, subject = {Grundriss}, language = {de} }