@incollection{HaivenThornton, author = {Haiven, Max and Thornton, Cassie}, title = {{\"U}ber die University of the Phoenix}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4264}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42640}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {271 -- 288}, abstract = {Wir haben die folgenden 13 Protokolle als Methodik entwickelt, die als Orientierungshilfe bei der Entstehung unserer Workshops und Interventionen dient.}, subject = {Kunst}, language = {de} } @phdthesis{Reformat, author = {Reformat, Martin}, title = {Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften}, isbn = {978-3-00-067121-0}, doi = {10.25643/bauhaus-universitaet.4279}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201102-42794}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {224}, abstract = {Die Mahlung als Zerkleinerungsprozess stellt seit den Anf{\"a}ngen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, {\"u}ber das Aufschließen von Heilkr{\"a}utern in M{\"o}rsern bis hin zur Herstellung von Tonern f{\"u}r Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein {\"o}kologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden f{\"u}r Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben r{\"u}ckt. Die Komplexit{\"a}t der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit" ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ans{\"a}tzen gefertigt. Dar{\"u}ber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsf{\"a}hige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erf{\"u}llt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei {\"u}bergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und H{\"u}ttensand angestellt. Um eine m{\"o}glichst effektive Mahlung von Zement und Kompositmaterialien zu gew{\"a}hrleisten, ist es wichtig, die Auswirkung von M{\"u}hlenparametern zu kennen. Hierf{\"u}r wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlk{\"o}rperm{\"u}hlen und mahlk{\"o}rperlosen M{\"u}hlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengef{\"u}ge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker f{\"u}hrten ung{\"u}nstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementpr{\"u}fungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und R{\"u}hrwerkskugelm{\"u}hle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie H{\"u}ttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zus{\"a}tzliche Reaktivit{\"a}t bei gleicher Granulometrie gegen{\"u}ber der herk{\"o}mmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem H{\"u}ttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberfl{\"a}chenvergr{\"o}ßerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erh{\"o}hung der Reaktivit{\"a}t zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberfl{\"a}chendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivit{\"a}tsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgef{\"u}hrt. Im Speziellen wurde untersucht, inwieweit eine R{\"u}ckf{\"u}hrung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf m{\"o}glich ist. Die hierf{\"u}r verwendete Mahltechnik umfasst sowohl konventionelle M{\"u}hlen als auch Hochenergiem{\"u}hlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualit{\"a}t wurde der sogenannte „Aktivierungskoeffizient" eingef{\"u}hrt. Es stellte sich heraus, dass die R{\"u}ckf{\"u}hrung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abh{\"a}ngt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegen{\"u}ber dem mit Gesteinsk{\"o}rnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationsw{\"a}rmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen M{\"u}hlen aufbereitet. Die hier erzielten Ergebnisse k{\"o}nnen teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend.}, subject = {Zement}, language = {de} } @misc{VollmerMichel, author = {Vollmer, Lisa and Michel, Boris}, title = {Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage: Aufruf zur Debatte}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.552}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43327}, pages = {163 -- 166}, abstract = {Die Verbindung der sozialen und der {\"o}kologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Daf{\"u}r, wie wenig das bisher gelingt, sind die {\"o}ffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der {\"o}kologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beitr{\"a}gen weiter auszuf{\"u}hren und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten.}, subject = {Wohnen}, language = {de} } @incollection{EmersonEgert, author = {Emerson, Jill and Egert, Gerko}, title = {wie den sozialen Muskel trainieren}, series = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4258}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42586}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {71 -- 89}, abstract = {Interview zum Social Muskel Club und dem "Geben und nehmen Spiel"}, subject = {Gabe}, language = {de} } @misc{MendoncadeAlmeida, type = {Master Thesis}, author = {Mendon{\c{c}}a de Almeida, Karina}, title = {Why isn't Google welcome in Kreuzberg? Social movement and the effects of Internet on urban space}, doi = {10.25643/bauhaus-universitaet.4244}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200924-42446}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {132}, abstract = {Advances in information and communication technologies such as the Internet have driven a great transformation in the interactions between individuals and the urban environment. As the use of the Internet in cities becomes more intense and diverse, there is also a restructuring of urban space, which is experienced by groups in society in various ways, according to the specificity of each context. Accordingly, large Internet companies have emerged as new players in the processes of urbanization, either through partnerships with the public administration or through various services offered directly to urban residents. Once these corporations are key actors in the digitalization of urban services, their operations can affect the patterns of urban inequality and generate a series of new struggles over the production of space. Interested in analyzing this phenomena from the perspective of civil society, the present Master Thesis examined a social movement that prevented Google to settle a new startup campus in the district of Kreuzberg, in Berlin. By asking why Google was not welcome in that context, this study also sought to understand how internet, as well as its main operators, has affected everyday life in the city. Thus, besides analyzing the movement, I investigated the particularities of the urban context where it arose and the elements that distinguish the mobilization's opponent. In pursuit of an interdisciplinary approach, I analyzed and discussed the results of empirical research in dialogue with critical theories in the fields of urban studies and the Internet, with emphasis on Castells' definitions of urban social movements and network society (1983, 2009, 2015), Couldry's and Mejias' (2019) idea of data colonialism, Lef{\`e}bvre's (1991, 1996) concepts of abstract space and the right to the city, as well as Zuboff's (2019) theory of surveillance capitalism. The case at hand has exposed that Google plays a prominent role in the way the Internet has been developed and deployed in cities. From the perspective accessed, the current appropriation of Internet technologies has been detrimental to individual autonomy and has contributed to intensifying existing inequalities in the city. The alternative vision to this relies mainly on the promotion of decentralized solidarity networks.}, subject = {Soziale Bewegung}, language = {en} } @misc{Pessoa, type = {Master Thesis}, author = {Pessoa, Suelen}, title = {Why do the Archives archive? A journey from the hunko to the counter-ethnography and back}, doi = {10.25643/bauhaus-universitaet.4328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210112-43280}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {A complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candombl{\´e}. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice.}, subject = {K{\"u}nstlerische Forschung}, language = {en} } @article{Buschow, author = {Buschow, Christopher}, title = {Why Do Digital Native News Media Fail? An Investigation of Failure in the Early Start-Up Phase}, series = {Media and Communication}, volume = {2020}, journal = {Media and Communication}, number = {Volume 8, Issue 2}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/mac.v8i2.2677}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200417-41347}, pages = {51 -- 61}, abstract = {Digital native news media have great potential for improving journalism. Theoretically, they can be the sites where new products, novel revenue streams and alternative ways of organizing digital journalism are discovered, tested, and advanced. In practice, however, the situation appears to be more complicated. Besides the normal pressures facing new businesses, entrepreneurs in digital news are faced with specific challenges. Against the background of general and journalism specific entrepreneurship literature, and in light of a practice-theoretical approach, this qualitative case study research on 15 German digital native news media outlets empirically investigates what barriers curb their innovative capacity in the early start-up phase. In the new media organizations under study here, there are—among other problems—a high degree of homogeneity within founding teams, tensions between journalistic and economic practices, insufficient user orientation, as well as a tendency for organizations to be underfinanced. The patterns of failure investigated in this study can raise awareness, help news start-ups avoid common mistakes before actually entering the market, and help industry experts and investors to realistically estimate the potential of new ventures within the digital news industry.}, subject = {Journalismus}, language = {en} } @inproceedings{RinsdorfBuschow, author = {Rinsdorf, Lars and Buschow, Christopher}, title = {Validit{\"a}t durch Agilit{\"a}t: Methodische Implikationen einerpraxistheoretisch fundierten Medieninnovationsforschung}, series = {Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medien{\"o}konomie der DGPUK 2019, K{\"o}ln}, booktitle = {Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medien{\"o}konomie der DGPUK 2019, K{\"o}ln}, editor = {Wellbrock, Christian and Zabel, Christian}, publisher = {SSOAR - Social Science Open Access Repository}, address = {Stuttgart}, organization = {Deutsche Gesellschaft f{\"u}r Publizistik- und Kommunikationswissenschaft e.V.}, doi = {10.25643/bauhaus-universitaet.4187}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200630-41874}, pages = {15}, abstract = {Das Innovationsmanagement von Medienorganisationen unterliegt derzeit erheblichen Ver{\"a}nderungen: Im ver{\"a}nderten Marktumfeld erweisen sich Flexibilit{\"a}t, schnelle Richtungswechsel und Anpassungsf{\"a}higkeit als zentral. Darauf muss auch die Medienmanagement-Forschung reagieren: Um die Agilit{\"a}t der gegenw{\"a}rtigen Unternehmenspraxis valide zu erforschen, ist eine ebenso agile, adaptive Forschung gefordert. Zu diesem Zweck schl{\"a}gt der Beitrag eine praxistheoretische Perspektive auf das Innovationsmanagement von Medienorganisationen vor. Empirische Forschungsdesigns, die aus einem solchen Zugriff resultieren, werden sowohl hinsichtlich ihrer methodischen Herausforderungen als auch ihres Forschungsprojektmanagements diskutiert. Der Beitrag greift außerdem neue M{\"o}glichkeitsr{\"a}ume des wissenschaftlichen Publizierens, des Universit{\"a}tsmanagements sowie der Forschungsorganisation auf, die praxistheoretisch gegr{\"u}ndete, empirische Innovationsforschung in der Medienwirtschaft einfordert.}, subject = {Medien{\"o}konomie}, language = {de} } @phdthesis{Javanmardi, author = {Javanmardi, Leila}, title = {URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979}, doi = {10.25643/bauhaus-universitaet.4597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220224-45971}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universit{\"a}t Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio-political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.}, subject = {Stadtplanung}, language = {en} } @unpublished{VogelBenzVoelker, author = {Vogel, Albert and Benz, Alexander and V{\"o}lker, Conrad}, title = {Untersuchung des W{\"a}rme{\"u}bergangs von zyklisch beanspruchten Betonzylindern}, volume = {2020}, number = {Volume 42, Issue 3}, publisher = {John Wiley and Sons}, doi = {10.25643/bauhaus-universitaet.4181}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200619-41813}, pages = {131 -- 138}, abstract = {Wiederkehrende Belastungen, wie sie beispielsweise an Br{\"u}cken oder Windenergieanlagen auftreten, k{\"o}nnen innerhalb der Nutzungsdauer solcher Bauwerke bis zu 1.000.000.000 Lastwechsel erreichen. Um das dadurch eintretende Erm{\"u}dungsverhalten von Beton zu untersuchen, werden diese zyklischen Beanspruchungen in mechanischen Versuchen mit Pr{\"u}fzylindern nachgestellt. Damit Versuche mit solch hohen Lastwechselzahlen in akzeptablen Zeitdauern durchgef{\"u}hrt werden k{\"o}nnen, wird die Belastungsfrequenz erh{\"o}ht. Als Folge dieser erh{\"o}hten Belas-tungsfrequenz erw{\"a}rmen sich allerdings die Betonprobek{\"o}rper, was zu einem fr{\"u}heren, unrealistischen Versagenszeitpunkt f{\"u}hren kann, weshalb die Erw{\"a}rmung begrenzt werden muss. Um die W{\"a}rmefreisetzung in der Probe zu untersuchen, wurden Versuche und Simulationen durchgef{\"u}hrt. Im Beitrag wird die analytische und messtechnische Analyse des W{\"a}rme{\"u}bergangs an erw{\"a}rmten Betonzylindern vorgestellt. Resultierend daraus wird eine M{\"o}glichkeit zur Reduktion der Erw{\"a}rmung an zyklisch beanspruchten Betonzylindern vorgestellt.}, subject = {Zyklische Beanspruchung}, language = {de} } @article{WolfLondong, author = {Wolf, Mario and Londong, J{\"o}rg}, title = {Transformation der Siedlungswasserwirtschaft - Steuerungsmechanismen im Diskurs ressourcenorientierter Systemans{\"a}tze am Beispiel von Th{\"u}ringen}, series = {Raumforschung und Raumordnung}, volume = {2020}, journal = {Raumforschung und Raumordnung}, number = {Band 78, Heft 4}, publisher = {Sciendo}, doi = {10.2478/rara-2020-0012}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42731}, pages = {397 -- 411}, abstract = {Neuartige Sanit{\"a}rsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilstr{\"o}men. In den Fach{\"o}ffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanit{\"a}rsysteme als ein geeigneter Ansatz f{\"u}r die zuk{\"u}nftige Sicherung der Abwasserentsorgung in l{\"a}ndlichen R{\"a}umen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch f{\"u}r Abwasserentsorger vielf{\"a}ltige Risiken die Einf{\"u}hrung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanit{\"a}rsystems im l{\"a}ndlichen Raum Th{\"u}ringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einf{\"u}hrung von ressourcenorientierten Systemans{\"a}tzen unterst{\"u}tzt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einf{\"u}hrung innovativer L{\"o}sungsans{\"a}tze, eine Erl{\"a}uterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsans{\"a}tzen,mit denen die Einf{\"u}hrung von neuartigen Sanit{\"a}rsystemen gef{\"o}rdert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanit{\"a}rsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist.}, subject = {Raumordnung}, language = {de} } @article{FathiSajadzadehMohammadiSheshkaletal., author = {Fathi, Sadegh and Sajadzadeh, Hassan and Mohammadi Sheshkal, Faezeh and Aram, Farshid and Pinter, Gergo and Felde, Imre and Mosavi, Amir}, title = {The Role of Urban Morphology Design on Enhancing Physical Activity and Public Health}, series = {International Journal of Environmental Research and Public Health}, volume = {2020}, journal = {International Journal of Environmental Research and Public Health}, number = {Volume 17, Issue 7, 2359}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ijerph17072359}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41225}, pages = {29}, abstract = {Along with environmental pollution, urban planning has been connected to public health. The research indicates that the quality of built environments plays an important role in reducing mental disorders and overall health. The structure and shape of the city are considered as one of the factors influencing happiness and health in urban communities and the type of the daily activities of citizens. The aim of this study was to promote physical activity in the main structure of the city via urban design in a way that the main form and morphology of the city can encourage citizens to move around and have physical activity within the city. Functional, physical, cultural-social, and perceptual-visual features are regarded as the most important and effective criteria in increasing physical activities in urban spaces, based on literature review. The environmental quality of urban spaces and their role in the physical activities of citizens in urban spaces were assessed by using the questionnaire tool and analytical network process (ANP) of structural equation modeling. Further, the space syntax method was utilized to evaluate the role of the spatial integration of urban spaces on improving physical activities. Based on the results, consideration of functional diversity, spatial flexibility and integration, security, and the aesthetic and visual quality of urban spaces plays an important role in improving the physical health of citizens in urban spaces. Further, more physical activities, including motivation for walking and the sense of public health and happiness, were observed in the streets having higher linkage and space syntax indexes with their surrounding texture.}, subject = {Morphologie}, language = {en} } @phdthesis{Camerin, author = {Camerin, Federico}, title = {THE ROLE OF THE GREAT PROPERTY IN THE EUROPEAN CITY-MAKING PROCESS IN THE LAST THIRD OF THE 20th CENTURY. MILITARY PROPERTY AS REFERENCE}, doi = {10.25643/bauhaus-universitaet.4201}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200714-42018}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {453}, abstract = {The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called 'great property' in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being 'capital in land', I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century. I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new 'areas of centrality' intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality.}, subject = {Stadtplanung}, language = {en} } @phdthesis{Lee, author = {Lee, Sihyo}, title = {The making of totalitarian city in Pyongyang: The spatial transition from free to ideology, and for marketization}, doi = {10.25643/bauhaus-universitaet.4173}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200526-41731}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {238}, abstract = {Space is a social product and a social producer. The main aim of this thesis is to reveal 'the process of totalitarian city making in Pyongyang', especially in the light of the interaction between the power and urban space. The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot. After the 1945 independence, Kim's regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens. After entry to the market, to keep Kim's controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives' gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang. This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society.}, subject = {Pyongyang}, language = {en} } @article{IşıkBueyueksaracLeventEkincietal., author = {I{\c{s}}{\i}k, Ercan and B{\"u}y{\"u}ksara{\c{c}}, Ayd{\i}n and Levent Ekinci, Yunus and Ayd{\i}n, Mehmet Cihan and Harirchian, Ehsan}, title = {The Effect of Site-Specific Design Spectrum on Earthquake-Building Parameters: A Case Study from the Marmara Region (NW Turkey)}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7247}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207247}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42758}, pages = {23}, abstract = {The Marmara Region (NW Turkey) has experienced significant earthquakes (M > 7.0) to date. A destructive earthquake is also expected in the region. To determine the effect of the specific design spectrum, eleven provinces located in the region were chosen according to the Turkey Earthquake Building Code updated in 2019. Additionally, the differences between the previous and updated regulations of the country were investigated. Peak Ground Acceleration (PGA) and Peak Ground Velocity (PGV) were obtained for each province by using earthquake ground motion levels with 2\%, 10\%, 50\%, and 68\% probability of exceedance in 50-year periods. The PGA values in the region range from 0.16 to 0.7 g for earthquakes with a return period of 475 years. For each province, a sample of a reinforced-concrete building having two different numbers of stories with the same ground and structural characteristics was chosen. Static adaptive pushover analyses were performed for the sample reinforced-concrete building using each province's design spectrum. The variations in the earthquake and structural parameters were investigated according to different geographical locations. It was determined that the site-specific design spectrum significantly influences target displacements for performance-based assessments of buildings due to seismicity characteristics of the studied geographic location.}, subject = {Erdbeben}, language = {en} } @techreport{BonhagDeRosaBoettgerGynzRekowski, author = {Bonhag-De Rosa, Katharina and Boettger, Till and Gynz-Rekowski, Christoph von}, title = {The "Stapelhaus": Experimental building project on the campus of the Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.4113}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200325-41139}, pages = {49}, abstract = {The project is a cooperation between the bauhaus.ifex and MFPA Weimar and is intended to develop step by step as an experimental student village. Special focus is given to sustainability and construction using different building materials. For the construction of the first room module, CemCel was chosen as a new, lightweight and fibre-based building material.}, subject = {Architecture}, language = {en} } @phdthesis{Kavrakov, author = {Kavrakov, Igor}, title = {Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-284-2}, doi = {10.25643/bauhaus-universitaet.4109}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200316-41099}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {314}, abstract = {Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles' strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind-bridge interaction and suggest appropriate modeling strategies for an enhanced design.}, subject = {Br{\"u}cke}, language = {en} } @article{ArtusKoch, author = {Artus, Mathias and Koch, Christian}, title = {State of the art in damage information modeling for RC bridges - A literature review}, series = {Advanced Engineering Informatics}, volume = {2020}, journal = {Advanced Engineering Informatics}, number = {volume 46, article 101171}, publisher = {Elsevier Science}, address = {Amsterdam}, doi = {10.1016/j.aei.2020.101171}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220506-46390}, pages = {1 -- 16}, abstract = {In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4\% and 2\% of its construction cost per year over its entire life cycle. This means that up to 80\% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.}, subject = {Building Information Modeling}, language = {de} } @article{DehghaniSalehiMosavietal., author = {Dehghani, Majid and Salehi, Somayeh and Mosavi, Amir and Nabipour, Narjes and Shamshirband, Shahaboddin and Ghamisi, Pedram}, title = {Spatial Analysis of Seasonal Precipitation over Iran: Co-Variation with Climate Indices}, series = {ISPRS, International Journal of Geo-Information}, volume = {2020}, journal = {ISPRS, International Journal of Geo-Information}, number = {Volume 9, Issue 2, 73}, publisher = {MDPI}, doi = {10.3390/ijgi9020073}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200128-40740}, pages = {23}, abstract = {Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing the variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Ni{\~n}o-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO), and North Atlantic Oscillation (NAO) on seasonal precipitation over Iran was investigated. For this purpose, 103 synoptic stations with at least 30 years of data were utilized. The Spearman correlation coefficient between the indices in the previous 12 months with seasonal precipitation was calculated, and the meaningful correlations were extracted. Then, the month in which each of these indices has the highest correlation with seasonal precipitation was determined. Finally, the overall amount of increase or decrease in seasonal precipitation due to each of these indices was calculated. Results indicate the Southern Oscillation Index (SOI), NAO, and PDO have the most impact on seasonal precipitation, respectively. Additionally, these indices have the highest impact on the precipitation in winter, autumn, spring, and summer, respectively. SOI has a diverse impact on winter precipitation compared to the PDO and NAO, while in the other seasons, each index has its special impact on seasonal precipitation. Generally, all indices in different phases may decrease the seasonal precipitation up to 100\%. However, the seasonal precipitation may increase more than 100\% in different seasons due to the impact of these indices. The results of this study can be used effectively in water resources management and especially in dam operation.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Chan, author = {Chan, Chiu Ling}, title = {Smooth representation of thin shells and volume structures for isogeometric analysis}, doi = {10.25643/bauhaus-universitaet.4208}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200812-42083}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {162}, abstract = {The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of "isoparametric", for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.}, subject = {Modellierung}, language = {en} } @misc{MacielCostadaSilva, type = {Master Thesis}, author = {Maciel Costa da Silva, Luiza}, title = {Smart Cities and Mobility Stations: Lessons learned from the Smarter Together in Vienna and Munich}, doi = {10.25643/bauhaus-universitaet.4270}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201012-42702}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {110}, abstract = {With an increasing urban population and urban problems arising from this unplanned growth, several projects aimed at promoting sustainable urban development have emerged. Smart mobility strategies, such as shared mobility and mobility stations, represent some of the solutions to promote changes in travel behavior. Despite its beneficial impacts, however, the implementation of such infrastructure is criticized for not contributing to current urban issues, as well as often disregarding knowledge about urban space and its functioning. In this context, the Smarter Together, a joint research and innovation project funded through the European Union program H2020, was implemented. The project selected three lighthouse cities to test and upscale innovative solutions: Vienna, Munich, and Lyon. This master thesis presents the main characteristics of the mobility stations systems implemented in Vienna and Munich in the scope of the project Smarter Together. Its main goal is to share what can be learned from their experiences while approaching critically the concept of smart cities. This master thesis identifies important aspects to take into account when planning, implementing, and operating mobility stations, and provides an understanding of smart cities and smart mobility that goes beyond the adoption of technology. Several methods were combined for the development of this master thesis, such as quantitative secondary data, observational studies, application of survey forms, explorative expert interviews, and literature review. This work has demonstrated that the Smarter Together has a cutting-edge scope and contributed greatly to research and innovation, by creating living laboratories to test the application of technology in the urban environment. However, from the perspective of the mobility stations assessment, many caveats were made. In short, many lessons could be learned and are presented throughout this work aiming at contributing to the improvement of the mobility stations implemented in the project areas in Munich and Vienna, as well as for inspiring other cities in Europe and worldwide.}, subject = {Intelligente Stadt}, language = {en} } @misc{Ansari, type = {Master Thesis}, author = {Ansari, Meisam}, title = {Simulation methods for functional and microstructured composite materials}, doi = {10.25643/bauhaus-universitaet.4278}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201103-42783}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {110}, abstract = {In this thesis, a generic model for the post-failure behavior of concrete in tension is proposed. A mesoscale model of concrete representing the heterogeneous nature of concrete is formulated. The mesoscale model is composed of three phases: aggregate, mortar matrix, and the Interfacial Transition Zone between them. Both local and non-local formulations of the damage are implemented and the results are compared. Three homogenization schemes from the literature are employed to obtain the homogenized constitutive relationship for the macroscale model. Three groups of numerical examples are provided.}, subject = {Simulation}, language = {en} } @article{NabipourDehghaniMosavietal., author = {Nabipour, Narjes and Dehghani, Majid and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Short-Term Hydrological Drought Forecasting Based on Different Nature-Inspired Optimization Algorithms Hybridized With Artificial Neural Networks}, series = {IEEE Access}, volume = {2020}, journal = {IEEE Access}, number = {volume 8}, publisher = {IEEE}, doi = {10.1109/ACCESS.2020.2964584}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40796}, pages = {15210 -- 15222}, abstract = {Hydrological drought forecasting plays a substantial role in water resources management. Hydrological drought highly affects the water allocation and hydropower generation. In this research, short term hydrological drought forecasted based on the hybridized of novel nature-inspired optimization algorithms and Artificial Neural Networks (ANN). For this purpose, the Standardized Hydrological Drought Index (SHDI) and the Standardized Precipitation Index (SPI) were calculated in one, three, and six aggregated months. Then, three states where proposed for SHDI forecasting, and 36 input-output combinations were extracted based on the cross-correlation analysis. In the next step, newly proposed optimization algorithms, including Grasshopper Optimization Algorithm (GOA), Salp Swarm algorithm (SSA), Biogeography-based optimization (BBO), and Particle Swarm Optimization (PSO) hybridized with the ANN were utilized for SHDI forecasting and the results compared to the conventional ANN. Results indicated that the hybridized model outperformed compared to the conventional ANN. PSO performed better than the other optimization algorithms. The best models forecasted SHDI1 with R2 = 0.68 and RMSE = 0.58, SHDI3 with R 2 = 0.81 and RMSE = 0.45 and SHDI6 with R 2 = 0.82 and RMSE = 0.40.}, subject = {Maschinelles Lernen}, language = {en} } @periodical{OPUS4-4864, title = {Schwerpunkt Schalten und Walten}, volume = {2020}, number = {11.2020}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-11-20}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48644}, pages = {184}, abstract = {What you are about to read is the very last issue of the ZMK. Since our overall research enterprise, the IKKM, has to cease all of its activities due to the end of its twelve years' funding by the German federal government, the ZMK will also come to an end. Its last topic, Schalten und Walten has also been the subject of the concluding biannual conference of the IKKM, and we hope it will be a fitting topic to resume the research of the IKKM on Operative Ontologies. Although this final issue is in English, we decided to leave its title in German: Schalten und Walten. As it is the case for the name of the IKKM, (Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie), the term seems untranslatable to us, not only for the poetic reason of the rhyming sound of the words. Switching and Ruling might be accepted as English versions, but quite an unbridgeable difference remains. In German, Schalten und Walten is a rather common and quite widespread idiom that can be found in everyday life. Whoever, the idiom stipulates, is able to execute Schalten und Walten has the power to act, has freedom of decision and power of disposition. Although both terms are mentioned together and belong together in the German expression Schalten und Walten, they are nevertheless complements to each other. They both refer to the exercise and existence of domination, disposal or power, but they nonetheless designate two quite different modes of being. Schalten is not so much sheer command over something, but government or management. It is linked to control, intervention and change, in short: it is operative and goes along with distinctive measures and cause-and-effect relations. The English equivalent switching reflects this more or less adequately.}, subject = {Medienwissenschaft}, language = {mul} } @phdthesis{Markert, author = {Markert, Michael}, title = {R{\"a}umliche Navigation durch richtungsgebundene Stereofonie}, doi = {10.25643/bauhaus-universitaet.4303}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201214-43038}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {394}, abstract = {Die Verbreitung mobiler Smartphones und besonders deren allgegenw{\"a}rtige Lokalisierungstechnologien ver{\"a}ndern das Navigationsverhalten im Raum nachhaltig. Parallel zur schnell voranschreitenden Entwicklung allt{\"a}glicher Ger{\"a}te, die mitgef{\"u}hrt werden, setzt der {\"U}bergang der bereits l{\"a}nger dauernden Entwicklung von Virtual-Reality-Technik in eine erweiterte und augmentierte Mixed Reality ein. In diesem Spannungsfeld untersucht die vorliegende Arbeit, inwieweit richtungsgebundene und binaural wiedergegebene Stereofonie die menschliche Bewegung im Raum beeinflussen kann und versucht zu er{\"o}rtern, welche Potenziale in der Wiederentdeckung einer relativ lange bekannten Technik liegen. Der Autor hat im Rahmen dieser Arbeit eine binaurale mobile Applikation f{\"u}r richtungsgebundene Stereofonie entwickelt, mit der virtuelle bewegte oder statische Audio-Hotspots im Raum platziert werden k{\"o}nnen. So kann links, rechts oder 30 Meter vor einer Person ein virtueller oder tats{\"a}chlicher Klang im Raum verortet sein. Durch die in Echtzeit berechnete binaurale Wiedergabe der Klangquellen mit einem Stereo-Kopfh{\"o}rer k{\"o}nnen diese r{\"a}umlich verorteten Kl{\"a}nge mit zwei Ohren dreidimensional wahrgenommen werden, {\"a}hnlich dem r{\"a}umlichen Sehen mit zwei Augen. Durch den Einsatz mehrerer lokalisierter Klangquellen als Soundscape entsteht eine augmentierte auditive Realit{\"a}t, die die physische Realit{\"a}t erweitert. Die Position und Navigation des Nutzers wird durch binaurale Lautst{\"a}rkenmodulation (die Lautst{\"a}rke nimmt bei abnehmender Distanz zur Quelle zu) und Stereopanning mit Laufzeitmodulation (die Richtung wird {\"u}ber ein Stereosignal auf beiden Ohren r{\"a}umlich links-rechts-vorne verortet) interaktiv und kybernetisch beeinflusst. Die Nutzer navigieren — durch ihr Interesse an den h{\"o}rbaren virtuellen Klangquellen geleitet — durch einen dynamisch erzeugten, dreidimensionalen akustischen Raum, der gleichzeitig ein virtueller und kybernetischer Raum ist, da die Repr{\"a}sentation der Kl{\"a}nge an die Bewegung und Ausrichtung der Nutzer im Raum angepasst wird. Diese Arbeit untersucht, ob die Bewegung von Menschen durch (virtuelle) Kl{\"a}nge beeinflusst werden kann und wie groß oder messbar dieser Einfluss ist. Dabei k{\"o}nnen nicht alle k{\"u}nstlerischen, architektonischen und philosophischen Fragen im Rahmen der vorliegenden Schrift er{\"o}rtert werden, obwohl sie dennoch als raumtheoretische Fragestellung von Interesse sind. Hauptgegenstand der vorliegenden Arbeit liegt in der Erforschung, ob richtungsgebundene Stereofonie einen relevanten Beitrag zur menschlichen Navigation, haupts{\"a}chlich zu Fuß, in urbanen Gebieten — vorwiegend im Außenraum — leisten kann. Der erste Teil gliedert sich in »Raum und Klang«, es werden raumtheoretische {\"U}berlegungen zur menschlichen Bewegung im Raum, Raumvorstellungen, r{\"a}umliche Kl{\"a}nge und Klangwahrnehmung sowie die Entwicklung stereofoner Apparaturen und Aspekte der Augmented Audio Reality besprochen. Im zweiten Teil werden drei Demonstratoren als Anwendungsszenarien und drei Evaluierungen im Außenraum vorgestellt. Die Tests untersuchen, ob sich das Verfahren zur Navigation f{\"u}r Fußg{\"a}nger eignet und inwieweit eine Einflussnahme auf das Bewegungsverhalten von Nutzern getroffen werden kann. Die Auswertungen der Tests zeigen, dass sich stereofone Kl{\"a}nge grunds{\"a}tzlich als Navigationssystem eignen, da eine große Mehrzahl der Teilnehmer die akustisch markierten Ziele leicht gefunden hat. Ebenso zeigt sich ein klarer Einfluss auf die Bewegungsmuster, allerdings ist dieser abh{\"a}ngig von individuellen Interessen und Vorlieben. Abschließend werden die Ergebnisse der Untersuchungen im Kontext der vorgestellten Theorien diskutiert und die Potenziale stereofoner Anwendungen in einem Ausblick behandelt. Bei der Gestaltung, Erzeugung und Anwendung mobiler Systeme sind unterschiedliche mentale und r{\"a}umliche Modelle und Vorstellungen der Entwickler und Anwender zu beachten. Da eine umfassende transdisziplin{\"a}re Betrachtung klare Begrifflichkeiten erfordert, werden Argumente f{\"u}r ein raumtheoretisches Vokabular diskutiert. Diese sind f{\"u}r einen gestalterischen Einsatz von richtungsgebundener Stereofonie — besonders im Kontext mobiler Navigation durch akustisch augmentierte R{\"a}ume — {\"a}ußerst relevant.}, subject = {Raum}, language = {de} } @incollection{Egert, author = {Egert, Gerko}, title = {Radikale Planung}, series = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4262}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42628}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {105 -- 118}, abstract = {Radikal Planen kann jede*r. Im Seminar, in der Lesegruppe, bei der Probe, im Studio, bei der politischen Aktion, bei der Textlekt{\"u}re. Man braucht nicht viel - nur viele. Denn planen macht man nicht allein. Eine Gruppe sind viele, Kommilitonen*innen wie Freund*innen, K{\"u}nstler*innen und Genoss*innen…}, subject = {Theater}, language = {de} } @article{GenaVoelkerSettles, author = {Gena, Amayu Wakoya and V{\"o}lker, Conrad and Settles, Gary}, title = {Qualitative and quantitative schlieren optical measurement of the human thermal plume}, series = {Indoor Air}, volume = {2020}, journal = {Indoor Air}, number = {volume 30, issue 4}, publisher = {John Wiley \& Sons}, doi = {10.1111/ina.12674}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200709-41936}, pages = {757 -- 766}, abstract = {A new large-field, high-sensitivity, single-mirror coincident schlieren optical instrument has been installed at the Bauhaus-Universit{\"a}t Weimar for the purpose of indoor air research. Its performance is assessed by the non-intrusive measurement of the thermal plume of a heated manikin. The schlieren system produces excellent qualitative images of the manikin's thermal plume and also quantitative data, especially schlieren velocimetry of the plume's velocity field that is derived from the digital cross-correlation analysis of a large time sequence of schlieren images. The quantitative results are compared with thermistor and hot-wire anemometer data obtained at discrete points in the plume. Good agreement is obtained, once the differences between path-averaged schlieren data and planar anemometry data are reconciled.}, subject = {Raumklima}, language = {en} } @incollection{EckertLinke, author = {Eckert, Lena and Linke, Maja}, title = {Pr{\"a}ludium zur {\"O}ffnung von Denkr{\"a}umen - Kritische Lehre / K{\"u}nstlerisches Forschen}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4269}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42699}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {335 -- 351}, abstract = {Schreibwalzer GeradekanonischeTexteumgibteine Aura der Unantastbarkeit und es scheint, als br{\"a}uchte man eine gewisse Art der Legitimation, sich diesen auch kritisch anzun{\"a}hern oder mit eigenen Gedanken auf eine Stufe zu stellen. Im Pr{\"a}ludium tasten wir uns phy- sisch mit Schere, Bleistift, Klebestift an diese Schwer- gewichte heran und dar{\"u}ber hinaus; mit Respekt, doch ohne Einsch{\"u}chterung.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @article{MousaviSteinkeJuniorTeixeiraetal., author = {Mousavi, Seyed Nasrollah and Steinke J{\´u}nior, Renato and Teixeira, Eder Daniel and Bocchiola, Daniele and Nabipour, Narjes and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Predictive Modeling the Free Hydraulic Jumps Pressure through Advanced Statistical Methods}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {Volume 8, Issue 3, 323}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math8030323}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41140}, pages = {16}, abstract = {Pressure fluctuations beneath hydraulic jumps potentially endanger the stability of stilling basins. This paper deals with the mathematical modeling of the results of laboratory-scale experiments to estimate the extreme pressures. Experiments were carried out on a smooth stilling basin underneath free hydraulic jumps downstream of an Ogee spillway. From the probability distribution of measured instantaneous pressures, pressures with different probabilities could be determined. It was verified that maximum pressure fluctuations, and the negative pressures, are located at the positions near the spillway toe. Also, minimum pressure fluctuations are located at the downstream of hydraulic jumps. It was possible to assess the cumulative curves of pressure data related to the characteristic points along the basin, and different Froude numbers. To benchmark the results, the dimensionless forms of statistical parameters include mean pressures (P*m), the standard deviations of pressure fluctuations (σ*X), pressures with different non-exceedance probabilities (P*k\%), and the statistical coefficient of the probability distribution (Nk\%) were assessed. It was found that an existing method can be used to interpret the present data, and pressure distribution in similar conditions, by using a new second-order fractional relationships for σ*X, and Nk\%. The values of the Nk\% coefficient indicated a single mean value for each probability.}, subject = {Maschinelles Lernen}, language = {en} } @article{SadeghzadehMaddahAhmadietal., author = {Sadeghzadeh, Milad and Maddah, Heydar and Ahmadi, Mohammad Hossein and Khadang, Amirhosein and Ghazvini, Mahyar and Mosavi, Amir Hosein and Nabipour, Narjes}, title = {Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network}, series = {Nanomaterials}, volume = {2020}, journal = {Nanomaterials}, number = {Volume 10, Issue 4, 697}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/nano10040697}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200421-41308}, abstract = {In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol-gel method. The results indicated that 1.5 vol.\% of nanofluids enhanced the thermal conductivity by up to 25\%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable. View Full-Text}, subject = {W{\"a}rmeleitf{\"a}higkeit}, language = {en} } @article{ShamshirbandBabanezhadMosavietal., author = {Shamshirband, Shahaboddin and Babanezhad, Meisam and Mosavi, Amir and Nabipour, Narjes and Hajnal, Eva and Nadai, Laszlo and Chau, Kwok-Wing}, title = {Prediction of flow characteristics in the bubble column reactor by the artificial pheromone-based communication of biological ants}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {volume 14, issue 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1715842}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200227-41013}, pages = {367 -- 378}, abstract = {A novel combination of the ant colony optimization algorithm (ACO)and computational fluid dynamics (CFD) data is proposed for modeling the multiphase chemical reactors. The proposed intelligent model presents a probabilistic computational strategy for predicting various levels of three-dimensional bubble column reactor (BCR) flow. The results prove an enhanced communication between ant colony prediction and CFD data in different sections of the BCR.}, subject = {Maschinelles Lernen}, language = {en} } @unpublished{AbbasKavrakovMorgenthaletal., author = {Abbas, Tajammal and Kavrakov, Igor and Morgenthal, Guido and Lahmer, Tom}, title = {Prediction of aeroelastic response of bridge decks using artificial neural networks}, doi = {10.25643/bauhaus-universitaet.4097}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200225-40974}, abstract = {The assessment of wind-induced vibrations is considered vital for the design of long-span bridges. The aim of this research is to develop a methodological framework for robust and efficient prediction strategies for complex aerodynamic phenomena using hybrid models that employ numerical analyses as well as meta-models. Here, an approach to predict motion-induced aerodynamic forces is developed using artificial neural network (ANN). The ANN is implemented in the classical formulation and trained with a comprehensive dataset which is obtained from computational fluid dynamics forced vibration simulations. The input to the ANN is the response time histories of a bridge section, whereas the output is the motion-induced forces. The developed ANN has been tested for training and test data of different cross section geometries which provide promising predictions. The prediction is also performed for an ambient response input with multiple frequencies. Moreover, the trained ANN for aerodynamic forcing is coupled with the structural model to perform fully-coupled fluid--structure interaction analysis to determine the aeroelastic instability limit. The sensitivity of the ANN parameters to the model prediction quality and the efficiency has also been highlighted. The proposed methodology has wide application in the analysis and design of long-span bridges.}, subject = {Aerodynamik}, language = {en} } @article{Buschow, author = {Buschow, Christopher}, title = {Practice-driven journalism research: Impulses for a dynamic understanding of journalism in the context of its reorganization}, series = {Studies in Communication Sciences}, volume = {2020}, journal = {Studies in Communication Sciences}, doi = {10.24434/j.scoms.2020.02.006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200819-42162}, pages = {1 -- 15}, abstract = {This paper proposes a practice-theoretical journalism research approach for an alternate and innovative perspective of digital journalism's current empirical challenges. The practice-theoretical approach is introduced by demonstrating its explanatory power in relation to demarcation problems, technological changes, economic challenges and challenges to journalism's legitimacy. Its respective advantages in dealing with these problems are explained and then compared to established journalism theories. The particular relevance of the theoretical perspective is due to (1) its central decision to observe journalistic practices, (2) the transgression of conventional journalistic boundaries, (3) the denaturalization of journalistic norms and laws, (4) the explicit consideration of a material, socio-technical dimension of journalism, (5) a focus on the conflicting relationship between journalistic practices and media management practices, and (6) prioritizing order generation over stability.}, subject = {Journalismus}, language = {en} } @book{OPUS4-4106, title = {Postwachstumsstadt. Konturen einer solidarischen Stadtpolitik}, editor = {Brokow-Loga, Anton and Eckardt, Frank}, publisher = {oekom verlag}, address = {M{\"u}nchen}, isbn = {978-3-96238-696-2}, doi = {10.14512/9783962386962}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200311-41061}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {344}, abstract = {St{\"a}dte ohne Wachstum - eine bislang kaum vorstellbare Vision. Doch Klimawandel, Ressourcenverschwendung, wachsende soziale Ungleichheiten und viele andere Zukunftsgefahren stellen das bisherige Allheilmittel Wachstum grunds{\"a}tzlich infrage. Wie wollen wir heute und morgen zusammenleben? Wie gestalten wir ein gutes Leben f{\"u}r alle in der Stadt? W{\"a}hrend in einzelnen Nischen diese Fragen bereits ansatzweise beantwortet werden, fehlt es noch immer an umfassenden Entw{\"u}rfen und Transformationsans{\"a}tzen, die eine fundamental andere, solidarische Stadt konturieren. Diesen Versuch wagt das Projekt Postwachstumsstadt. In diesem Buch werden konzeptionelle und pragmatische Aspekte aus verschiedenen Bereichen der Stadtpolitik zusammengebracht, die neue Pfade aufzeigen und verkn{\"u}pfen. Die Beitr{\"a}ge diskutieren st{\"a}dtische Wachstumskrisen, transformative Planung und Konflikte um Gestaltungsmacht. Nicht zuletzt wird dabei auch die Frage nach der Rolle von Stadtutopien neu gestellt. Dadurch soll eine l{\"a}ngst f{\"a}llige Debatte dar{\"u}ber angestoßen werden, wie sich notwendige st{\"a}dtische Wenden durch eine sozial{\"o}kologische Neuorientierung vor Ort verwirklichen lassen.}, subject = {Architektur}, language = {de} } @article{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Performance evaluation of ductless personalized ventilation in comparison with desk fans using numerical simulations}, series = {Indoor Air}, volume = {2020}, journal = {Indoor Air}, publisher = {John Wiley \& Sons Ltd}, doi = {10.1111/ina.12672}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200422-41407}, pages = {14}, abstract = {The performance of ductless personalized ventilation (DPV) was compared to the performance of a typical desk fan since they are both stand-alone systems that allow the users to personalize their indoor environment. The two systems were evaluated using a validated computational fluid dynamics (CFD) model of an office room occupied by two users. To investigate the impact of DPV and the fan on the inhaled air quality, two types of contamination sources were modelled in the domain: an active source and a passive source. Additionally, the influence of the compared systems on thermal comfort was assessed using the coupling of CFD with the comfort model developed by the University of California, Berkeley (UCB model). Results indicated that DPV performed generally better than the desk fan. It provided better thermal comfort and showed a superior performance in removing the exhaled contaminants. However, the desk fan performed better in removing the contaminants emitted from a passive source near the floor level. This indicates that the performance of DPV and desk fans depends highly on the location of the contamination source. Moreover, the simulations showed that both systems increased the spread of exhaled contamination when used by the source occupant.}, subject = {Behaglichkeit}, language = {en} } @masterthesis{Wild, type = {Bachelor Thesis}, author = {Wild, Lena}, title = {Patient l{\"a}ndlicher Raum. Planungen und F{\"o}rdermaßnahmen zur Sicherstellung der medizinischen Versorgung in Th{\"u}ringen}, doi = {10.25643/bauhaus-universitaet.4340}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210121-43400}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {83}, abstract = {Die Sicherstellung der medizinischen Versorgung in der Bundesrepublik wird seit einigen Jahren verst{\"a}rkt diskutiert. Besonders in l{\"a}ndliche Regionen ist die Gew{\"a}hrleistung einer bedarfsgerechten medizinischen Versorgung problematisch. L{\"a}ngst ist dies zu einem gesamtgesellschaftlichen Thema geworden. Die Bachelorarbeit von Lena Wild untersucht die Schnittstelle von r{\"a}umlicher Planung und medizinischer Planung mit der Frage „Inwiefern leisten die derzeitigen Planungen und F{\"o}rderprogramme einen positiven Beitrag zur Sicherstellung der medizinischen Versorgung im l{\"a}ndlichen Raum Th{\"u}ringens?" Neben einer Literatur- und Datenanalyse stehen Expert:inneninterviews mit verschiedenen kommunalen und medizinischen Akteur:innen aus ausgew{\"a}hlten Landkreisen in Th{\"u}ringen im Fokus der Arbeit. Nach einer Einordnung der medizinischen Versorgung in den Kontext der r{\"a}umlichen Planung wird eine {\"U}bersicht {\"u}ber das Gesundheitssystem der Bundesrepublik und die Besonderheiten in Ostdeutschland gegeben. Darauffolgend werden Instrumente zur Steuerung der medizinischen Versorgung genauer untersucht. Besonders die kassen{\"a}rztliche Bedarfsplanung als zentrales Steuerungsinstrument und die F{\"o}rderm{\"o}glichkeiten in Th{\"u}ringen und deren Wirkungsweisen stehen dabei im Fokus. Im Weiteren wird auf l{\"a}ndliche R{\"a}ume und deren Herausforderungen f{\"u}r die Sicherstellung der medizinischen Versorgung und die Kommunikation und Zusammenarbeit der Akteur:innen eingegangen. Die Arbeit ist als Exkurs der Raumplanung in eine Fachplanung zu verstehen. Zwischen medizinischer Fachplanung und r{\"a}umlicher Planung bestehen Wechselwirkungen. Das Kennen von Instrumenten und Wirkungsweisen der anderen Disziplin schafft dabei einen Mehrwert, um gemeinsame Ziele, wie die fl{\"a}chendeckende medizinische Versorgung und damit einhergehend eine nachhaltige r{\"a}umliche Entwicklung, zu erreichen.}, subject = {L{\"a}ndlicher Raum}, language = {de} } @article{Schoenig, author = {Sch{\"o}nig, Barbara}, title = {Paradigm Shifts in Social Housing After Welfare-State Transformation : Learning from the German Experience}, series = {International Journal of Urban and Regional Research}, volume = {2020}, journal = {International Journal of Urban and Regional Research}, publisher = {John Wiley \& Sons}, doi = {10.1111/1468-2427.12914}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200709-41966}, pages = {18}, abstract = {Welfare-state transformation and entrepreneurial urban politics in Western welfare states since the late 1970s have yielded converging trends in the transformation of the dominant Fordist paradigm of social housing in terms of its societal function and institutional and spatial form. In this article I draw from a comparative case study on two cities in Germany to show that the resulting new paradigm is simultaneously shaped by the idiosyncrasies of the country's national housing regime and local housing policies. While German governments have successively limited the societal function of social housing as a legitimate instrument only for addressing exceptional housing crises, local policies on providing and organizing social housing within this framework display significant variation. However, planning and design principles dominating the spatial forms of social housing have been congruent. They may be interpreted as both an expression of the marginalization of social housing within the restructured welfare housing regime and a tool of its implementation according to the logics of entrepreneurial urban politics.}, subject = {Deutschland}, language = {en} } @misc{Freire, type = {Master Thesis}, author = {Freire, Kamai}, title = {Panafricanism and African Revolution in Brazilian Music}, doi = {10.25643/bauhaus-universitaet.4353}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210216-43536}, school = {Hochschule f{\"u}r Musik FRANZ LISZT}, pages = {163}, abstract = {This research departs from the teachings of Kwame Ture on the difference between mobilization and organization in the panafricanist struggle to analyze then the use of Music within the anti-racist and anti-colonialist struggle in Brazil.}, subject = {Saz}, language = {en} } @misc{Froehlich, type = {Master Thesis}, author = {Fr{\"o}hlich, Jan}, title = {On systematic approaches for interpreted information transfer of inspection data from bridge models to structural analysis}, doi = {10.25643/bauhaus-universitaet.4131}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200416-41310}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {82}, abstract = {In conjunction with the improved methods of monitoring damage and degradation processes, the interest in reliability assessment of reinforced concrete bridges is increasing in recent years. Automated imagebased inspections of the structural surface provide valuable data to extract quantitative information about deteriorations, such as crack patterns. However, the knowledge gain results from processing this information in a structural context, i.e. relating the damage artifacts to building components. This way, transformation to structural analysis is enabled. This approach sets two further requirements: availability of structural bridge information and a standardized storage for interoperability with subsequent analysis tools. Since the involved large datasets are only efficiently processed in an automated manner, the implementation of the complete workflow from damage and building data to structural analysis is targeted in this work. First, domain concepts are derived from the back-end tasks: structural analysis, damage modeling, and life-cycle assessment. The common interoperability format, the Industry Foundation Class (IFC), and processes in these domains are further assessed. The need for usercontrolled interpretation steps is identified and the developed prototype thus allows interaction at subsequent model stages. The latter has the advantage that interpretation steps can be individually separated into either a structural analysis or a damage information model or a combination of both. This approach to damage information processing from the perspective of structural analysis is then validated in different case studies.}, subject = {Br{\"u}ckenbau}, language = {en} } @article{BandJanizadehChandraPaletal., author = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Saha, Asish and Chakrabortty, Rabbin and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Novel Ensemble Approach of Deep Learning Neural Network (DLNN) Model and Particle Swarm Optimization (PSO) Algorithm for Prediction of Gully Erosion Susceptibility}, series = {Sensors}, volume = {2020}, journal = {Sensors}, number = {Volume 20, issue 19, article 5609}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s20195609}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43341}, pages = {1 -- 27}, abstract = {This study aims to evaluate a new approach in modeling gully erosion susceptibility (GES) based on a deep learning neural network (DLNN) model and an ensemble particle swarm optimization (PSO) algorithm with DLNN (PSO-DLNN), comparing these approaches with common artificial neural network (ANN) and support vector machine (SVM) models in Shirahan watershed, Iran. For this purpose, 13 independent variables affecting GES in the study area, namely, altitude, slope, aspect, plan curvature, profile curvature, drainage density, distance from a river, land use, soil, lithology, rainfall, stream power index (SPI), and topographic wetness index (TWI), were prepared. A total of 132 gully erosion locations were identified during field visits. To implement the proposed model, the dataset was divided into the two categories of training (70\%) and testing (30\%). The results indicate that the area under the curve (AUC) value from receiver operating characteristic (ROC) considering the testing datasets of PSO-DLNN is 0.89, which indicates superb accuracy. The rest of the models are associated with optimal accuracy and have similar results to the PSO-DLNN model; the AUC values from ROC of DLNN, SVM, and ANN for the testing datasets are 0.87, 0.85, and 0.84, respectively. The efficiency of the proposed model in terms of prediction of GES was increased. Therefore, it can be concluded that the DLNN model and its ensemble with the PSO algorithm can be used as a novel and practical method to predict gully erosion susceptibility, which can help planners and managers to manage and reduce the risk of this phenomenon.}, subject = {Geoinformatik}, language = {en} } @phdthesis{Salavati, author = {Salavati, Mohammad}, title = {Multi-Scale Modeling of Mechanical and Electrochemical Properties of 1D and 2D Nanomaterials, Application in Battery Energy Storage Systems}, doi = {10.25643/bauhaus-universitaet.4183}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200623-41830}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {166}, abstract = {Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods. Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method. Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD. Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schr{\"o}dinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA. The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries. Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials.}, subject = {Batterie}, language = {en} } @phdthesis{HosseinNezhadShirazi, author = {Hossein Nezhad Shirazi, Ali}, title = {Multi-Scale Modeling of Lithium ion Batteries: a thermal management approach and molecular dynamic studies}, doi = {10.25643/bauhaus-universitaet.4098}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200214-40986}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low. Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs. Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite. It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.}, subject = {Akkumulator}, language = {en} } @inproceedings{PaulRodehorst, author = {Paul, Debus and Rodehorst, Volker}, title = {Multi-Scale Flight Path Planning for UAS Building Inspection}, series = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, volume = {2020}, booktitle = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, editor = {Santos, Toledo}, publisher = {Springer}, doi = {10.25643/bauhaus-universitaet.4205}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42053}, pages = {19}, abstract = {Unmanned aircraft systems (UAS) show large potential for the construction industry. Their use in condition assessment has increased significantly, due to technological and computational progress. UAS play a crucial role in developing a digital maintenance strategy for infrastructure, saving cost and effort, while increasing safety and reliability. Part of that strategy are automated visual UAS inspections of the building's condition. The resulting images can automatically be analyzed to identify and localize damages to the structure that have to be monitored. Further interest in parts of a structure can arise from events like accidents or collisions. Areas of low interest exist, where low resolution monitoring is sufficient. From different requirements for resolution, different levels of detail can be derived. They require special image acquisition parameters that differ mainly in the distance between camera and structure. Areas with a higher level of detail require a smaller distance to the object, producing more images. This work proposes a multi-scale flight path planning procedure, enabling higher resolution requirements for areas of special interest, while reducing the number of required images to a minimum. Careful selection of the camera positions maintains the complete coverage of the structure, while achieving the required resolution in all areas. The result is an efficient UAS inspection, reducing effort for the maintenance of infrastructure.}, subject = {Drohne}, language = {en} } @book{WellbrockBuschow, author = {Wellbrock, Christian-Mathias and Buschow, Christopher}, title = {Money for Nothing and Content for Free?}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-7489-0725-1}, doi = {10.5771/9783748907251}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201001-42475}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {209}, abstract = {Wie k{\"o}nnen journalistische Angebote nachhaltig finanziert werden? Dies bleibt die Kernfrage f{\"u}r Medienh{\"a}user und journalistische Neugr{\"u}ndungen bei der Entwicklung und beim Aufbau tragf{\"a}higer digitaler Gesch{\"a}ftsmodelle. Die Autoren des vorliegenden Bandes vermitteln einen breiten {\"U}berblick {\"u}ber den Wissensstand zum Thema Paid Content, Plattformen und Zahlungsbereitschaft im Journalismus und er{\"o}ffnen innovative Blickwinkel auf neuartige Plattformmodelle ebenso wie auf Motive und Bed{\"u}rfnisse der Nutzerinnen und Nutzer digitaljournalistischer Inhalte. Auf Grundlage empirischer Forschung werden Handlungsempfehlungen f{\"u}r die nutzerzentrierte Ausgestaltung von Paid-Content-Angeboten sowie neue Perspektiven auf Zahlungsbereitschaft im digitalen Journalismus erschlossen - relevant sowohl f{\"u}r die Wissenschaft wie auch f{\"u}r die Medienpraxis.}, subject = {Digitaljournalismus}, language = {de} } @article{ShabaniSamadianfardSattarietal., author = {Shabani, Sevda and Samadianfard, Saeed and Sattari, Mohammad Taghi and Mosavi, Amir and Shamshirband, Shahaboddin and Kmet, Tibor and V{\´a}rkonyi-K{\´o}czy, Annam{\´a}ria R.}, title = {Modeling Pan Evaporation Using Gaussian Process Regression K-Nearest Neighbors Random Forest and Support Vector Machines; Comparative Analysis}, series = {Atmosphere}, volume = {2020}, journal = {Atmosphere}, number = {Volume 11, Issue 1, 66}, doi = {10.3390/atmos11010066}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200110-40561}, pages = {17}, abstract = {Evaporation is a very important process; it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, evaporation is considered as a complex and nonlinear phenomenon to model. Thus, machine learning methods have gained popularity in this realm. In the present study, four machine learning methods of Gaussian Process Regression (GPR), K-Nearest Neighbors (KNN), Random Forest (RF) and Support Vector Regression (SVR) were used to predict the pan evaporation (PE). Meteorological data including PE, temperature (T), relative humidity (RH), wind speed (W), and sunny hours (S) collected from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error (RMSE), correlation coefficient (R) and Mean Absolute Error (MAE). Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. The results of this study showed that at Gonbad-e Kavus, Gorgan and Bandar Torkman stations, GPR with RMSE of 1.521 mm/day, 1.244 mm/day, and 1.254 mm/day, KNN with RMSE of 1.991 mm/day, 1.775 mm/day, and 1.577 mm/day, RF with RMSE of 1.614 mm/day, 1.337 mm/day, and 1.316 mm/day, and SVR with RMSE of 1.55 mm/day, 1.262 mm/day, and 1.275 mm/day had more appropriate performances in estimating PE values. It was found that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W and S had the most accurate predictions and were proposed for precise estimation of PE. The findings of the current study indicated that the PE values may be accurately estimated with few easily measured meteorological parameters.}, subject = {Maschinelles Lernen}, language = {en} } @unpublished{VogelVoelkerBodeetal., author = {Vogel, Albert and V{\"o}lker, Conrad and Bode, Matthias and Marx, Steffen}, title = {Messung und Simulation der Erw{\"a}rmung von erm{\"u}dungsbeanspruchten Betonprobek{\"o}rpern}, series = {Bauphysik}, volume = {2020}, journal = {Bauphysik}, number = {Volume 42, Issue 2}, publisher = {John Wiley and Sons}, doi = {10.25643/bauhaus-universitaet.4147}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200425-41471}, pages = {86 -- 93}, abstract = {Im vorliegenden Beitrag werden Messungen und Berechnungen vorgestellt, die die Temperaturentwicklung in Betonzylindern aufgrund zyklischer Beanspruchung genau beschreiben. Die Messungen wurden in einem Versuchsstand, die Berechnungen im FEM-Programm ANSYS durchgef{\"u}hrt. Mit Hilfe der Temperaturmessungen konnten die Simulationen f{\"u}r die Temperaturentwicklung der Betonzylinder mit der verwendeten Betonrezeptur validiert werden. Die Untersuchungen lassen den Schluss zu, dass bei zyklischer Probek{\"o}rperbelastung und der einhergehenden Probek{\"o}rperdehnung Energie dissipiert wird und diese maßgeblich f{\"u}r die Erw{\"a}rmung der Probe verantwortlich ist.}, subject = {zyklische Beanspruchung}, language = {de} } @incollection{Schnurbein, author = {Schnurbein, Stefanie von}, title = {Mehr als Anerkennung. Das Schreiblabor als Resonanzraum und Assemblage}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42656}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {141 -- 164}, abstract = {Ein "how to" von Schreibtechniken f{\"u}r Seminare und Kolloquien.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @incollection{Linseisen, author = {Linseisen, Elisa}, title = {Medien/Denken/Um/Formatieren}, series = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4257}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42574}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {51 -- 69}, abstract = {Die medienwissenschaftliche Praxis des Um / Formatierens wurde im Wintersemester 2017 / 18 mit vierzig Bache- lor-Studierenden der Medien-, Theaterwissenschaft und den Gender Studies entwickelt und erprobt. Inhalt des Seminars waren konkrete mediale Standardformate, wie z. B. die Carte de Visite, die Schallplatte, der 16- oder 35mm Filmstreifen, digitale Dateiformate, wie das JPEG, GIF, MP3, die Videokassette oder auch Papierformate wie DIN A0 oder A8.}, subject = {Format}, language = {de} } @article{DokhanchiArnoldVogeletal.2020, author = {Dokhanchi, Najmeh Sadat and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Measurement of indoor air temperature distribution using acoustic travel-time tomography: Optimization of transducers location and sound-ray coverage of the room}, series = {Measurement}, volume = {2020}, journal = {Measurement}, number = {Volume 164, article 107934}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.measurement.2020.107934}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220524-46473}, year = {2020}, abstract = {Acoustic travel-time TOMography (ATOM) allows the measurement and reconstruction of air temperature distributions. Due to limiting factors, such as the challenge of travel-time estimation of the early reflections in the room impulse response, which heavily depends on the position of transducers inside the measurement area, ATOM is applied mainly outdoors. To apply ATOM in buildings, this paper presents a numerical solution to optimize the positions of transducers. This optimization avoids reflection overlaps, leading to distinguishable travel-times in the impulse response reflectogram. To increase the accuracy of the measured temperature within tomographic voxels, an additional function is employed to the proposed numerical method to minimize the number of sound-path-free voxels, ensuring the best sound-ray coverage of the room. Subsequently, an experimental set-up has been performed to verify the proposed numerical method. The results indicate the positive impact of the optimal positions of transducers on the distribution of ATOM-temperatures.}, subject = {Bauphysik}, language = {en} } @article{SeichterNesslerKnopf, author = {Seichter, Cosima Zita and Neßler, Miriam and Knopf, Paul}, title = {Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes}, series = {Movements. Journal for Critical Migration and Border Regime Studies}, volume = {2020}, journal = {Movements. Journal for Critical Migration and Border Regime Studies}, number = {Volume 5, Issue 1}, address = {G{\"o}ttingen}, doi = {10.25643/bauhaus-universitaet.4480}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44807}, pages = {1 -- 9}, abstract = {The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union.}, subject = {Europ{\"a}ische Union}, language = {en} }