@inproceedings{DzwigonHempel,
  author    = {Dzwigon, Wieslaw and Hempel, Lorenz},
  title     = {ZUR SYNCHRONISATION VON LINIEN IM {\"O}PNV},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2944},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29442},
  pages     = {12},
  abstract  = {Wir betrachten im {\"O}PNV ({\"O}ffentlichen Personennahverkehr) diejenige Situation, daß zwei Bus- oder Straßenbahnlinien gemeinsame Haltestellen haben. Ziel unserer Untersuchungen ist es, f{\"u}r beide Linien einen solchen Fahrplan zu finden, der f{\"u}r die Fahrg{\"a}ste m{\"o}glichst viel Bequemlichkeit bietet. Die Bedarfsstruktur - die Anzahl von Personen, die die beiden Linien benutzen - setzt dabei gewisse Beschr{\"a}nkungen f{\"u}r die Taktzeiten der beiden Linien. Die verbleibenden Entscheidungsfreiheiten sollen im Sinne der Zielstellung ausgenutzt werden. Im Vortrag wird folgenden Fragen nachgegangen: - nach welchen Kriterien kann man die "Bequemlichkeit" oder die "Synchonisationsg{\"u}te" messen? - wie kann man die einzelnen "Synchronisationsmaße" berechnen ? - wie kann man die verbleibenden Entscheidungsfreiheiten nutzen, um eine m{\"o}glichst gute Synchronisation zu erreichen ? Die Ergebnisse werden dann auf einige Beispiele angewandt und mit den bereitgestellten Methoden L{\"o}sungsvorschl{\"a}ge unterbreitet.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@article{HallerMenzel1997,
  author    = {Haller, P. and Menzel, R.},
  title     = {Wissensbasierte Tragwerksplanung im Ingenieurholzbau mit ICAD},
  doi       = {10.25643/bauhaus-universitaet.497},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4976},
  year      = {1997},
  abstract  = {Der Entwurf einfacher Konstruktionen stellt f{\"u}r den Tragwerksplaner zumeist eine Routineaufgabe dar. {\"U}blicherweise werden Statik, Zeichnungen sowie Elementelisten separat voneinander erstellt. Das Programmsystem ICAD bietet die M{\"o}glichkeit, diese Arbeiten in einer Bearbeitungsstufe durchzuf{\"u}hren. Die Programmierung der Bemessung, Darstellung und Auswertung von Bauteilen wird mit dem Editor Emacs vorgenommen, die grafische Umsetzung des compilierten Quelltextes erfolgt im ICAD-Browser. Innerhalb dieser Benutzeroberfl{\"a}che steht eine Reihe von Werkzeugen f{\"u}r die Eingabe und Visualisierung von Daten zur Verf{\"u}gung. Betrachtet man die zu bearbeitenden Bauteile und Anschl{\"u}sse als bekannte Konstruktionen des Ingenieurholzbaus, f{\"u}r die es eine festgelegte Anzahl von Abmessungen und Kennwerten gibt, so l{\"a}ßt sich jede dieser Konstruktionen als eigenst{\"a}ndiger Modul programmieren. Der Tragwerksplaner ist somit in der Lage, aus einem Katalog an Bauteilen und Anschl{\"u}ssen die Gesamtkonstruktion zusammenzustellen. Allgemeing{\"u}ltige Kennwerte, Berechnungsverfahren und h{\"a}ufig verwendete Unterprogramme stehen modular als Wissensbasis zur Verf{\"u}gung und werden von den einzelnen Tragelementen bedarfsgerecht eingebunden. Eine weitere M{\"o}glichkeit der wissensbasierten Tragwerksplanung stellt die sogenannte Multi-Criteria-Analyse dar. Bei diesem Verfahren nimmt das Programm selbst{\"a}ndig eine Entscheidungsfindung f{\"u}r eine oder mehrere g{\"u}nstige Konstruktionsl{\"o}sungen vor. Dazu sind lediglich Wichtungen verschiedener Randbedingungen durch den Anwender erforderlich.},
  subject      = {Ingenieurholzbau},
  language  = {de}
}
@inproceedings{Markwardt,
  author    = {Markwardt, Klaus},
  title     = {WAVELET ANALYSIS AND FREQUENCY BAND DECOMPOSITIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2989},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29895},
  pages     = {22},
  abstract  = {In many applications such as parameter identification of oscillating systems in civil enginee-ring, speech processing, image processing and others we are interested in the frequency con-tent of a signal locally in time. As a start wavelet analysis provides a time-scale decomposition of signals, but this wavelet transform can be connected with an appropriate time-frequency decomposition. For instance in Matlab are defined pseudo-frequencies of wavelet scales as frequency centers of the corresponding bands. This frequency bands overlap more or less which depends on the choice of the biorthogonal wavelet system. Such a definition of frequency center is possible and useful, because different frequencies predominate at different dyadic scales of a wavelet decomposition or rather at different nodes of a wavelet packet decomposition tree. The goal of this work is to offer better algorithms for characterising frequency band behaviour and for calculating frequency centers of orthogonal and biorthogonal wavelet systems. This will be done with some product formulas in frequency domain. Now the connecting procedu-res are more analytical based, better connected with wavelet theory and more assessable. This procedures doesn't need any time approximation of the wavelet and scaling functions. The method only works in the case of biorthogonal wavelet systems, where scaling functions and wavelets are defined over discrete filters. But this is the practically essential case, because it is connected with fast algorithms (FWT, Mallat Algorithm). At the end corresponding to the wavelet transform some closed formulas of pure oscillations are given. They can generally used to compare the application of different wavelets in the FWT regarding it's frequency behaviour.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@article{SteinmannHuebler1997,
  author    = {Steinmann, Frank and H{\"u}bler, Reinhard},
  title     = {Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme},
  doi       = {10.25643/bauhaus-universitaet.456},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4568},
  year      = {1997},
  abstract  = {F{\"u}r die Gestaltung einer durchg{\"a}ngigen Unterst{\"u}tzung des Entwurfsprozesses stehen gegenw{\"a}rtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repr{\"a}sentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen ber{\"u}cksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. F{\"u}r ein echtes CADesign bildet dessen Kl{\"a}rung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise {\"a}hnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivit{\"a}ten ergeben sich f{\"u}r: die Systematisierung computergest{\"u}tzter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsf{\"a}higen UNDO- bzw. TMS-Mechanismen.},
  subject      = {CAD},
  language  = {de}
}
@inproceedings{SchleinkoferSchaefervanTreecketal.,
  author    = {Schleinkofer, Matthias and Sch{\"a}fer, T. and van Treeck, Christoph and Rank, Ernst},
  title     = {VOM LASERSCAN ZUM PLANUNGSTAUGLICHEN PRODUKTMODELL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3015},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30159},
  pages     = {18},
  abstract  = {Im Bereich der Altbausanierung und der Bestandserfassung im Bauwesen ist es h{\"a}ufig notwendig, bestehende Pl{\"a}ne hinsichtlich des Bauwerkszustandes zu aktualisieren oder, wenn diese Pl{\"a}ne nicht (mehr) zug{\"a}nglich sind, g{\"a}nzlich neue Planunterlagen des Ist-Zustandes zu erstellen. Ein komfortabler Weg, diese Bauwerksdaten zu erheben, er{\"o}ffnet die Technologie der Laservermessung. Der vorliegende Artikel stellt in diesem Zusammenhang Ans{\"a}tze zur Teilautomatisierung der Generierung eines dreidimensionalen Computermodells eines Bauwerkes vor. Als Ergebnis wird ein Volumenmodell bereitgestellt, in dem zun{\"a}chst die geometrischen und topologischen Informationen {\"u}ber Fl{\"a}chen, Kanten und Punkte im Sinne eines B-rep Modells beschrieben sind. Die Objekte dieses Volumenmodells werden mit Verfahren aus dem Bereich der k{\"u}nstlichen Intelligenz analysiert und in Bauteilklassen systematisch kategorisiert. Die Kenntnis der Bauteilsemantik erlaubt es somit, aus den Daten ein Bauwerks-Produktmodell abzuleiten und dieses einzelnen Fachplanern - etwa zur Erstellung eines Energiepasses - zug{\"a}nglich zu machen. Der Aufsatz zeigt den erfolgreichen Einsatz virtueller neuronaler Netze im Bereich der Bestandserfassung anhand eines komplexen Beispiels.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{ThurowDonathPetzold2003,
  author    = {Thurow, Torsten and Donath, Dirk and Petzold, Frank},
  title     = {Vision eines mitwachsenden Geometriemodells f{\"u}r die computergest{\"u}tzte Bauaufnahme},
  doi       = {10.25643/bauhaus-universitaet.365},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3655},
  year      = {2003},
  abstract  = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells f{\"u}r das computergest{\"u}tzte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale {\"U}bersicht zu verlieren oder entsprechende r{\"a}umliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterst{\"u}tzt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberfl{\"a}chen},
  subject      = {Bauaufnahme},
  language  = {de}
}
@inproceedings{SampaioHenriquesStuderetal.,
  author    = {Sampaio, Alcinia Zita and Henriques, Pedro and Studer, P. and Luizi, Rui},
  title     = {VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30090},
  pages     = {9},
  abstract  = {The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{RueppelMeissnerGreb2003,
  author    = {R{\"u}ppel, Uwe and Meißner, Udo F. and Greb, Steffen},
  title     = {Vernetzte Bauprozesssteuerung auf der Basis bauteilspezifischer Prozessmuster f{\"u}r geotechnische Konstruktionselemente},
  doi       = {10.25643/bauhaus-universitaet.355},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3556},
  year      = {2003},
  abstract  = {Der Beitrag basiert auf den Ans{\"a}tzen und Ergebnissen des Forschungsprojekts >Prozessorientierte Vernetzung von Ingenieurplanungen am Beispiel der Geotechnik<, des DFG-Schwerpunktprogramms 1103 >Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau<. Ziel ist die Entwicklung einer netzwerkbasierten Kooperationsplattform zur Unterst{\"u}tzung von Ingenieurplanungen. Methodische Grundlagen hierf{\"u}r stellen die Petri-Netze mit individuellen Marken in Verbindung mit einer semantischen Informationsbewertung dar. Der Beitrag zeigt an einem Beispiel die grundlegenden M{\"o}glichkeiten der Petri-Netze auf und stellt die Steuerung der Planungsprozesse aufgrund von Metainformationen dar. Dar{\"u}ber hinaus wird der Ansatz verfolgt, auf der Basis bauteilorientierter Prozessmuster f{\"u}r geotechnische Konstruktionselemente den ver{\"a}nderlichen Prozessablauf zu erfassen. Abschließend wird ein Weg zur Implementierung gezeigt.},
  subject      = {Geotechnik},
  language  = {de}
}
@inproceedings{Siekierski,
  author    = {Siekierski, Wojciech},
  title     = {VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3021},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30217},
  pages     = {8},
  abstract  = {The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one - on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection - with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{HapurneNistor,
  author    = {Hapurne, Tania Mariana and Nistor, S.},
  title     = {USING MODERN TECHNOLOGIES TO UPGRADE EDILITARY URBAN INFRASTRUCTURE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2965},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29650},
  pages     = {6},
  abstract  = {Adopting the European laws concerning environmental protection will require sustained efforts of the authorities and communities from Romania; implementing modern solutions will become a fast and effective option for the improvement of the functioning systems, in order to prevent disasters. As a part of the urban infrastructure, the drainage networks of pluvial and residual waters are included in the plan of promoting the systems which protect the environmental quality, with the purpose of integrated and adaptive management. The paper presents a distributed control system for sewer network of Iasi town. Unsatisfactory technical state of the actual sewer system is exposed, focusing on objectives related to implementation of the control system. The proposed distributed control system of Iasi drainage network is based on the implementation of the hierarchic control theory for diagnose, sewer planning and management. There are proposed two control levels: coordinating and local execution. Configuration of the distributed control system, including data acquisition and conversion equipment, interface characteristics, local data bus, data communication network, station configuration are widely described. The project wish to be an useful instrument for the local authorities in the preventing and reducing the impact of future natural disasters over the urban areas by means of modern technologies.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LehnerHartmann,
  author    = {Lehner, Karlheinz and Hartmann, Dietrich},
  title     = {USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2984},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29844},
  pages     = {10},
  abstract  = {Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{DudekRichter,
  author    = {Dudek, Mariusz and Richter, Matthias},
  title     = {UNTERSUCHUNGEN ZUR ZUVERL{\"A}SSIGKEIT DES STRAßENBAHNNETZES IN KRAKAU},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2943},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29432},
  pages     = {19},
  abstract  = {Der Begriff der Zuverl{\"a}ssigkeit spielt eine zentrale Rolle bei der Bewertung von Verkehrsnetzen. Aus der Sicht der Nutzer des {\"o}ffentlichen Personennahverkehrs ({\"O}PNV) ist eines der wichtigsten Kriterien zur Beurteilung der Qualit{\"a}t des Liniennetzes, ob es m{\"o}glich ist, mit einer großen Sicherheit das Reiseziel in einer vorgegebenen Zeit zu erreichen. Im Vortrag soll dieser Zuverl{\"a}ssigkeitsbegriff mathematisch gefasst werden. Dabei wird zun{\"a}chst auf den {\"u}blichen Begriff der Zuverl{\"a}ssigkeit eines Netzes im Sinne paarweiser Zusammenhangswahrscheinlichkeiten eingegangen. Dieser Begriff wird erweitert durch die Betrachtung der Zuverl{\"a}ssigkeit unter Einbeziehung einer maximal zul{\"a}ssigen Reisezeit. In vergangenen Arbeiten hat sich die Ring-Radius-Struktur als bew{\"a}hrtes Modell f{\"u}r die theoretische Beschreibung von Verkehrsnetzen erwiesen. Diese {\"U}berlegungen sollen nun durch Einbeziehung realer Verkehrsnetzstrukturen erweitert werden. Als konkretes Beispiel dient das Straßenbahnnetz von Krakau. Hier soll insbesondere untersucht werden, welche Auswirkungen ein geplanter Ausbau des Netzes auf die Zuverl{\"a}ssigkeit haben wird. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@phdthesis{Spiekermann2008,
  author    = {Spiekermann, Christoph},
  title     = {Unterst{\"u}tzung der Material- und Produktauswahl in der Architektur durch Plausibilit{\"a}t der Entscheidung},
  doi       = {10.25643/bauhaus-universitaet.1350},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080925-14253},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2008},
  abstract  = {Architektur wird vorwiegend {\"u}ber die den Raum begrenzenden Oberfl{\"a}chen wahrgenommen. Das Oberfl{\"a}chenmaterial kann daher mit seinen sinnlichen Eigenschaften die Entwurfsintention unterst{\"u}tzen, zugleich muss es aber auch zahlreiche technische, {\"o}konomische und {\"o}kologische Anforderungen erf{\"u}llen. Materialwahl in der Architektur bedeutet somit das Abw{\"a}gen einer Vielzahl von Parametern, die sich sowohl inhaltlich als auch hinsichtlich ihrer Relevanz stark unterscheiden. Die Entscheidung f{\"u}r ein Material kann dabei durch verschiedene analoge und digitale Ans{\"a}tze unterst{\"u}tzt werden. Die vorhandenen Systeme sind jedoch allesamt begrenzt: in den von ihnen ber{\"u}cksichtigten Aspekten, den m{\"o}glichen Suchwegen oder ihren Inhalten. Keines der in dieser Arbeit untersuchten Systeme ber{\"u}cksichtigt zudem die unterschiedliche Wichtigkeit oder gegenseitige Abh{\"a}ngigkeiten und Unsch{\"a}rfen der in die Materialwahl einfließenden Kriterien. Die vorliegende Arbeit formuliert daher eine Gesamtstrategie zur besseren Unterst{\"u}tzung der Entscheidung f{\"u}r ein Oberfl{\"a}chenmaterial. Im Wesentlichen wird dabei eine Methode vorgestellt, wie die inhaltlich h{\"o}chst unterschiedlichen Kriterien, welche Einfluss auf die Materialwahl aus{\"u}ben, mit ihrer jeweiligen Relevanz gegeneinander in Ansatz gebracht werden k{\"o}nnen, um eine umfassende Bewertung der Materialalternativen zu erm{\"o}glichen. In einem zweiten Schritt wird mit Multidimensional Scaling eine Technik der Informationsvisualisierung benutzt, die eine zus{\"a}tzliche Unterst{\"u}tzung durch weitere Analysem{\"o}glichkeiten und andere Suchwege er{\"o}ffnet. Das vorgeschlagene Verfahren ist in einem Software-Prototyp umgesetzt. Die Arbeit leistet damit einen Beitrag, die Auswahl eines geeigneten Materials in der Architektur zu erleichtern, diese Entscheidung plausibel begr{\"u}nden zu k{\"o}nnen und den Weg der Entscheidungsfindung nachvollziehbar werden zu lassen.},
  subject      = {Entscheidungsbegr{\"u}ndung},
  language  = {de}
}
@inproceedings{PaulPfeifferMuelle2003,
  author    = {Paul, Norbert and Pfeiffer, Daniel and M{\"u}lle, Jutta},
  title     = {Unterst{\"u}tzung der integrierten Geb{\"a}udeplanung und -verwaltung mit einem topologischen Kerndatenmodell},
  doi       = {10.25643/bauhaus-universitaet.342},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3424},
  year      = {2003},
  abstract  = {An einem Teil der Topologie architektonischer R{\"a}ume, dem Volumenadjazenzgraphen (VAG), wird gezeigt wie topologisches Modellieren Anwendungen der Bauplanung integrieren kann. Dazu wird ein Prototyp vorgestellt, der im wesentlichen aus drei Komponenten besteht: Mit dem Anforderungsmanager werden Anforderungen eigegeben, die formal gut handhabbar sind. Mit dem Topologiemanager werden diese Anforderungen mit gezeichneten R{\"a}umen kombiniert. Die topologischen Relationen in den Zeichnungen werden mit den entsprechenden Mitteln des GIS berechnet und in eine Datenbank exportiert. Der Anforderungspr{\"u}fer vergleicht dann die Anforderungsdaten, die mit Hilfe des Anforderungsmanagers erzeugt wurden, mit den Topologiedaten. Dieser Ansatz soll zeigen, wie topologische Modelle eine Formalisierung semantisch hochstehender Informationen erm{\"o}glichen, indem sie als Eigenschaften von Graphen dargestellt werden},
  subject      = {Bauplanung},
  language  = {de}
}
@inproceedings{ZimmermannBartels,
  author    = {Zimmermann, J{\"u}rgen and Bartels, Jan-Hendrik},
  title     = {TREE-BASED METHODS FOR RESOURCE INVESTMENT AND RESOURCE LEVELLING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3040},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30405},
  pages     = {6},
  abstract  = {The execution of project activities generally requires the use of (renewable) resources like machines, equipment or manpower. The resource allocation problem consists in assigning time intervals to the execution of the project activities while taking into account temporal constraints between activities emanating from technological or organizational requirements and costs incurred by the resource allocation. If the total procurement cost of the different renewable resources has to be minimized we speak of a resource investment problem. If the cost depends on the smoothness of the resource utilization over time the underlying problem is called a resource levelling problem. In this paper we consider a new tree-based enumeration method for solving resource investment and resource levelling problems exploiting some fundamental properties of spanning trees. The enumeration scheme is embedded in a branch-and-bound procedure using a workload-based lower bound and a depth first search. Preliminary computational results show that the proposed procedure is promising for instances with up to 30 activities.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{HuhntGielsdorf,
  author    = {Huhnt, Wolfgang and Gielsdorf, F.},
  title     = {TOPOLOGICAL INFORMATION AS LEADING INFORMATION IN BUILDING PRODUCT MODELS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2911},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29110},
  pages     = {11},
  abstract  = {Digital models of buildings are widely used in civil engineering. In these models, geometric information is used as leading information. Engineers are used to have geometric information, and, for instance, it is state of the art to specify a point by its three coordinates. However, the traditional approaches have disadvantages. Geometric information is over-determined. Thus, more geometric information is specified and stored than needed. In addition, engineers already deal with topological information. A denotation of objects in buildings is of topological nature. It has to be answered whether approaches where topological information becomes a leading role would be more efficient in civil engineering. This paper presents such an approach. Topological information is modelled independently of geometric information. It is used for denoting the objects of a building. Geometric information is associated to topological information so that geometric information "weights" a topology. The concept presented in this paper has already been used in surveying existing buildings. Experiences in the use of this concept showed that the number of geometric information that is required for a complete specification of a building could be reduced by a factor up to 100. Further research will show how this concept can be used in planning processes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WolkowiczRuthStahr,
  author    = {Wolkowicz, Christian and Ruth, J{\"u}rgen and Stahr, Alexander},
  title     = {TOOL TO CHECK TOPOLOGY AND GEOMETRY FOR SPATIAL STRUCTURES ON BASIS OF THE EXTENDED MAXWELL'S RULE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3037},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30370},
  pages     = {8},
  abstract  = {One of the simplest principle in the design of light-weight structures is to avoid bending. This can be achieved by dissolving girders into members acting purely in axial tension or compression. The employment of cables for the tensioned members leads to even lighter structures which are called cable-strut structures. They constitute a subclass of spatial structures. To give fast information about the general feasibility of an architectural concept employing cable-strut structures is a challenging task due to their sophisticated mechanical behavior. In this regard it is essential to control if the structure is stable and if pre-stress can be applied. This paper presents a tool using the spreadsheet software Microsoft (MS) Excel which can give such information. Therefore it is not necessary to purchase special software and the according time consuming training is much lower. The tool was developed on basis of the extended Maxwell's rule, which besides topology also considers the geometry of the structure. For this the rank of the node equilibrium matrix is crucial. Significance and determination of the rank and the implementation of the corresponding algorithms in MS Excel are described in the following. The presented tool is able to support the structural designer in an early stage of the project in finding a feasible architectural concept for cable-strut structures. As examples for the application of the software tool two special cable-strut structures, so called tensegrity structures, were examined for their mechanical behavior.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ChangChang,
  author    = {Chang, Wei-Tsang and Chang, Teng-Wen},
  title     = {TIME-BASED FORM TRANSFORMATION WITH FOLDING SPACE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2937},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29371},
  pages     = {10},
  abstract  = {Design activity could be treated as state transition computationally. In stepwise processing, in-between form-states are not easily observed. However, in this research time-based concept is introduced and applied in order to bridge the gap. In architecture, folding is one method of form manipulation and architects also want to search for alternatives by this operation. Besides, folding operation has to be defined and parameterized before time factor is involved as a variable of folding. As a result, time-based transformation provides sequential form states and redirects design activity.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Heuer,
  author    = {Heuer, Andreas},
  title     = {THREE-DIMENSIONAL MODELING OF CONCRETE WITH DAMAGE AND PLASTICITY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2967},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29671},
  pages     = {15},
  abstract  = {The concrete is modeled as a material with damage and plasticity, whereat the viscoplastic and the viscoelastic behaviour depends on the rate of the total strains. Due to the damage behaviour the compliance tensor develops different properties in tension and compression. There have been tested various yield surfaces and flow rules, damage rules respectively to their usability in a concrete model. One three-dimensional yield surface was developed from a failure surface based on the Willam--Warnke five-parameter model by the author. Only one general uni-axial stress-strain-relation is used for the numeric control of the yield surface. From that curve all necessary parameters for different strengths of concrete and different strain rates can be derived by affine transformations. For the flow rule in the compression zone a non associated inelastic potential is used, in the tension zone a Rankine potential. Conditional on the time-dependent formulation, the symmetry of the system equations is maintained in spite of the usage of non-associated potentials for the derivation of the inelastic strains. In case of quasi statical computations a simple viscoplastic law is used that is rested on an approach to Perzyna. The principle of equality of dissipation power in the uni-axial and the three-axial state of stress is used. It is modified by a factor that depends on the actual stress ratio and in comparison with the Kupfer experiments it implicates strains that are more realistic. The implementation of the concrete model is conducted in a mixed hybrid finite element. Examples in the structural level are introduced for verification of the concrete model.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Klingert,
  author    = {Klingert, Maik},
  title     = {THE USAGE OF IMAGE PROCESSING METHODS FOR INTERPRETATION OF THERMOGRAPHY DATA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2977},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29777},
  pages     = {13},
  abstract  = {For assessment of old buildings, thermal graphic analysis aided with infra-red camera have been employed in a wide range nowadays. Image processing and evaluation can be economically practicable only if the image evaluation can also be automated to the largest extend. For that reason methods of computer vision are presented in this paper to evaluate thermal images. To detect typical thermal image elements, such as thermal bridges and lintels in thermal images respectively gray value images, methods of digital image processing have been applied, of which numerical procedures are available to transform, modify and encode images. At the same time, image processing can be regarded as a multi-stage process. In order to be able to accomplish the process of image analysis from image formation through perfecting and segmentation to categorization, appropriate functions must be implemented. For this purpose, different measuring procedures and methods for automated detection and evaluation have been tested.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KnauerDammeierMeffert,
  author    = {Knauer, Uwe and Dammeier, T. and Meffert, Beate},
  title     = {THE STRUCTURE OF ROAD TRAFFIC SCENES AS REVEALED BY UNSUPERVISED ANALYSIS OF THE TIME AVERAGED OPTICAL FLOW},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2978},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29780},
  pages     = {9},
  abstract  = {The Lucas-Kanade tracker has proven to be an efficient and accurate method for calculation of the optical flow. However, this algorithm can reliably track only suitable image features like corners and edges. Therefore, the optical flow can only be calculated for a few points in each image, resulting in sparse optical flow fields. Accumulation of these vectors over time is a suitable method to retrieve a dense motion vector field. However, the accumulation process limits application of the proposed method to fixed camera setups. Here, a histogram based approach is favored to allow more than a single typical flow vector per pixel. The resulting vector field can be used to detect roads and prescribed driving directions which constrain object movements. The motion structure can be modeled as a graph. The nodes represent entry and exit points for road users as well as crossings, while the edges represent typical paths.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EblingScheuermann,
  author    = {Ebling, Julia and Scheuermann, G.},
  title     = {TEMPLATE MATCHING ON VECTOR FIELDS USING CLIFFORD ALGEBRA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2946},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29464},
  pages     = {25},
  abstract  = {Due to the amount of flow simulation and measurement data, automatic detection, classification and visualization of features is necessary for an inspection. Therefore, many automated feature detection methods have been developed in recent years. However, only one feature class is visualized afterwards in most cases, and many algorithms have problems in the presence of noise or superposition effects. In contrast, image processing and computer vision have robust methods for feature extraction and computation of derivatives of scalar fields. Furthermore, interpolation and other filter can be analyzed in detail. An application of these methods to vector fields would provide a solid theoretical basis for feature extraction. The authors suggest Clifford algebra as a mathematical framework for this task. Clifford algebra provides a unified notation for scalars and vectors as well as a multiplication of all basis elements. The Clifford product of two vectors provides the complete geometric information of the relative positions of these vectors. Integration of this product results in Clifford correlation and convolution which can be used for template matching of vector fields. For frequency analysis of vector fields and the behavior of vector-valued filters, a Clifford Fourier transform has been derived for 2D and 3D. Convolution and other theorems have been proved, and fast algorithms for the computation of the Clifford Fourier transform exist. Therefore the computation of Clifford convolution can be accelerated by computing it in Clifford Fourier domain. Clifford convolution and Fourier transform can be used for a thorough analysis and subsequent visualization of flow fields.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@article{KoenigThurowBraunesetal.2010,
  author    = {K{\"o}nig, Reinhard and Thurow, Torsten and Braunes, J{\"o}rg and Donath, Dirk and Schneider, Sven},
  title     = {Technische Einf{\"u}hrung in FREAC: A Framework for Enhancing Research in Architectural Design and Communication},
  doi       = {10.25643/bauhaus-universitaet.1449},
  url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201105183216},
  year      = {2010},
  abstract  = {Im vorliegenden Beitrag wird ein Framework f{\"u}r ein verteiltes dynamisches Produktmodell (FREAC) vorgestellt, welches der experimentellen Softwareentwicklung dient. Bei der Entwicklung von FREAC wurde versucht, folgende Eigenschaften umzusetzen, die bei herk{\"o}mmlichen Systemen weitgehend fehlen: Erstens eine hohe Flexibilit{\"a}t, also eine m{\"o}glichst hohe Anpassbarkeit f{\"u}r unterschiedliche Fachdisziplinen; Zweitens die M{\"o}glichkeit, verschiedene Tools nahtlos miteinander zu verkn{\"u}pfen; Drittens die verteilte Modellbearbeitung in Echtzeit; Viertens das Abspeichern des gesamten Modell-Bearbeitungsprozesses; F{\"u}nftens eine dynamische Erweiterbarkeit sowohl f{\"u}r Softwareentwickler, als auch f{\"u}r die Nutzer der Tools. Die Bezeichnung FREAC umfasst sowohl das Framework zur Entwicklung und Pflege eines Produktmodells (FREAC-Development) als auch die entwickelten Tools selbst (FREAC-Tools).},
  subject      = {CAD},
  language  = {de}
}
@inproceedings{BultheelJansenMaesetal.,
  author    = {Bultheel, Adhemar and Jansen, M. and Maes, J. and Van Aerschot, W. and Vanraes, E.},
  title     = {SUBDIVIDE AND CONQUER RESOLUTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2909},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29091},
  pages     = {47},
  abstract  = {This contribution will be freewheeling in the domain of signal, image and surface processing and touch briefly upon some topics that have been close to the heart of people in our research group. A lot of the research of the last 20 years in this domain that has been carried out world wide is dealing with multiresolution. Multiresolution allows to represent a function (in the broadest sense) at different levels of detail. This was not only applied in signals and images but also when solving all kinds of complex numerical problems. Since wavelets came into play in the 1980's, this idea was applied and generalized by many researchers. Therefore we use this as the central idea throughout this text. Wavelets, subdivision and hierarchical bases are the appropriate tools to obtain these multiresolution effects. We shall introduce some of the concepts in a rather informal way and show that the same concepts will work in one, two and three dimensions. The applications in the three cases are however quite different, and thus one wants to achieve very different goals when dealing with signals, images or surfaces. Because completeness in our treatment is impossible, we have chosen to describe two case studies after introducing some concepts in signal processing. These case studies are still the subject of current research. The first one attempts to solve a problem in image processing: how to approximate an edge in an image efficiently by subdivision. The method is based on normal offsets. The second case is the use of Powell-Sabin splines to give a smooth multiresolution representation of a surface. In this context we also illustrate the general method of construction of a spline wavelet basis using a lifting scheme.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Coulon1997,
  author    = {Coulon, Carl-Helmut},
  title     = {Strukurorientiertes Fallbasiertes Schließen},
  doi       = {10.25643/bauhaus-universitaet.24},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040212-265},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {1997},
  abstract  = {Das Ziel dieser Arbeit war es, durch Verwendung geeigneter vorhandener CAD-Pl{\"a}ne die Bearbeitung neuer CAD-Pl{\"a}ne zu unterst{\"u}tzen. Entstanden ist ein generischer Ansatz zum fallbasierten Schließens. Da in CAD-Pl{\"a}nen die r{\"a}umliche Struktur eine wichtige Rolle spielt, ist das Konzept auf strukturorientierte Anwendungen ausgerichtet. Deshalb bezeichne ich es als ein Konzept zum " strukturorientierten fallbasierten Schließen". Die Arbeit spezifiziert das Minimum an Wissen, welches zur Suche und Wiederverwendung von F{\"a}llen ben{\"o}tigt wird, wie das dar{\"u}ber hinausgehende Wissen verarbeitet wird, welche Zusammenh{\"a}nge es zum Beispiel zwischen Vergleichs- und Anpassungswissen gibt und wie man das Wissen modellieren kann. Zur Erl{\"a}uterung wird das ben{\"o}tigte Wissen anhand verschiedener Anwendungen dargestellt. Das in der Arbeit vorgestellte Konzept erlaubt die Erg{\"a}nzung, Detaillierung und Korrektur einer Anfrage. Die beiden entscheidenden Algorithmen dienen dem Vergleich von Anfrage und Fall und der Anpassung der Information des Falles zur Modifikation der Anfrage.},
  subject      = {Fallbasiertes Schließen},
  language  = {de}
}
@article{Fink2004,
  author    = {Fink, Thomas},
  title     = {Structural analysis, design and detailing using standard CAD software and standard building information model},
  doi       = {10.25643/bauhaus-universitaet.270},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2702},
  year      = {2004},
  abstract  = {This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models.},
  subject      = {Bauindustrie},
  language  = {en}
}
@inproceedings{BrossmannMueller,
  author    = {Broßmann, Marko and M{\"u}ller, Karl-Heinz},
  title     = {STOCHASTISCHE ANALYSE VON STAHLBETONBALKEN IM GRENZZUSTAND DER ADAPTION UNTER BER{\"u}CKSICHTIGUNG DER STEIFIGKEITSDEGRADATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2934},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29341},
  pages     = {20},
  abstract  = {Am Beispiel eines 3-feldrigen Durchlauftr{\"a}gers wird die Versagenswahrscheinlichkeit von wechselnd belasteten Stahlbetonbalken bez{\"u}glich des Grenzzustandes der Adaption (Einspielen, shakedown) untersucht. Die Adaptionsanalyse erfolgt unter Ber{\"u}cksichtigung der beanspruchungschabh{\"a}ngigen Degradation der Biegesteifigkeit infolge Rissbildung. Die damit verbundene mechanische Problemstellung kann auf die Adaptionsanalyse linear elastisch - ideal plastischer Balkentragwerke mit unbekannter aber begrenzter Biegesteifigkeit zur{\"u}ckgef{\"u}hrt werden. Die Versagenswahrscheinlichkeit wird unter Ber{\"u}cksichtigung stochastischer Tragwerks- und Belastungsgr{\"o}ßen berechnet. Tragwerkseigenschaften und st{\"a}ndige Lasten gelten als zeitunabh{\"a}ngige Zufallsgr{\"o}ßen. Zeitlich ver{\"a}nderliche Lasten werden als nutzungsdauerbezogene Extremwerte POISSONscher Rechteck-Pulsprozesse unter Ber{\"u}cksichtigung zeitlicher {\"U}berlagerungseffekte modelliert, so dass die Versagenswahrscheinlichkeit ebenfalls eine nutzungsdauerbezogene Gr{\"o}ße ist. Die mechanischen Problemstellungen werden numerisch mit der mathematischen Optimierung gel{\"o}st. Die Versagenswahrscheinlichkeit wird auf statistischem Weg mit der Monte-Carlo-Methode gesch{\"a}tzt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{BauerRichter,
  author    = {Bauer, Marek and Richter, Matthias},
  title     = {STATISTICAL ANALYSIS OF TIME LOST BY TRAMS BEFORE DEPARTURE FROM STOPS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2922},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29226},
  pages     = {18},
  abstract  = {The ride of the tram along the line, defined by a time-table, consists of the travel time between the subsequent sections and the time spent by tram on the stops. In the paper, statistical data collected in the city of Krakow is presented and evaluated. In polish conditions, for trams the time spent on stops makes up the remarkable amount of 30 \% of the total time of tram line operation. Moreover, this time is characterized by large variability. The time spent by tram on a stop consists of alighting and boarding time and time lost by tram on stop after alighting and boarding time ending, but before departure. Alighting and boarding time itself usually depends on the random number of alighting and boarding passengers and also on the number of passengers which are inside the vehicle. However, the time spent by tram on stop after alighting and boarding time ending is an effect of certain random events, mainly because of impossibility of departure from stop, caused by lack of priorities for public transport vehicles. The main focus of the talk lies on the description and the modelling of these effects. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Petrova,
  author    = {Petrova, Lyllia B.},
  title     = {STATIC ANALYSIS ON MODELS OF CONTINUOUS ORTHOTROPIC THIN-WALLED PRISMATIC SHELL STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3000},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30007},
  pages     = {8},
  abstract  = {The paper presents a linear static analysis on continuous orthotropic thin-walled shell structures simply supported at the transverse ends with a random deformable contour of the cross section. The external loads can be random as well. The class of this structures involves most of the bridges, scaffold bridges, some roof structures etc. A numerical example of steel continuous structures on five spans with an open contour of the cross-section has been solved. The examination of the structure has used the following two computation models: a prismatic structure consisting of isotropic strips, a plates and ribs, with considering their real interaction, and a smooth orthotropic plate equivalent to the structure in the first model. The displacements and forces of the structure characterizing its stressed and deformed condition have been determined. The results obtained from the two solutions have been analyzed. The study on the structure is made with the force method in combination with the analytical finite strip method (AFSM) in displacements. The basic system is obtained by separating the superstructure from the understructure at the places of intermediate supports and consists of two parts. The first part is a single span thin-walled prismatic shell structure; the second part presents supports (columns, space frames etc.). The connection between the superstructure and intermediate supports is made under random supporting conditions. The forces at the supporting points in the direction of the connections removed are assumed to be the basic unknowns of the force method. The solution of the superstructure has been accomplished by the AFSM in displacements. The structure is divided in only one (transverse) direction into a finite number of plain strips connected to each other in longitudinal linear nodes. The three displacements of the points on the node lines and the rotation around those lines have been assumed to be the basic unknown in each node. The boundary conditions of each strip of the basic system correspond to the simply support along the transverse ends and the restraint along the longitudinal ones. The particular strip of the basic system has been solved by the method of the single trigonometric series. The method is reduced to solving a discrete structure in displacements and restoring its continuity at the places of the sections made in respect to both the displacements and forces. The two parts of the basic system have been solved in sequence under the action of single values of each of the basic unknowns and with the external load. The solution of the support part is accomplished using software for analyzing structures by the FEM. The basic unknown forces have been determined from system of canonic equations, the conditions of the deformations continuity on the places of the removed connections under superstructure and intermediate supports. The final displacements and forces at a random point of a continuous superstructure have been determined using the principle of superposition. The computations have been carried by software developed with Visual Fortran version 5.0 for PC.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Loemker,
  author    = {L{\"o}mker, Thorsten Michael},
  title     = {SOLVING REVITALIZATION-PROBLEMS BY THE USE OF A CONSTRAINT PROGRAMING LANGUAGE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2987},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29874},
  pages     = {13},
  abstract  = {This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that "design" is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{PerepelitsaTebuevaShenkao,
  author    = {Perepelitsa, V. A. and Tebueva, F.B. and Shenkao, Timour},
  title     = {SOLVABILITY EXPLORATION OF SEGMENTATION PROBLEM WITH LINEAR CONVOLUTION ALGORITHMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2999},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29999},
  pages     = {13},
  abstract  = {The paper is dedicated to decidability exploration of market segmentation problem with the help of linear convolution algorithms. Mathematical formulation of this problem represents interval task of bipartite graph cover by stars. Vertices of the first partition correspond to types of commodities, vertices of the second - to customers groups. Appropriate method is offered for interval problem reduction to two-criterion task that has one implemented linear convolution algorithm. Unsolvability with the help of linear convolution algorithm of multicriterion, and consequently interval, market segmentation problem is proved.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EiermannErnstUllmann,
  author    = {Eiermann, Michael and Ernst, O. and Ullmann, Elisabeth},
  title     = {SOLUTION STRATEGIES FOR STOCHASTIC FINITE ELEMENT DISCRETIZATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2949},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29493},
  pages     = {11},
  abstract  = {We consider efficient numerical methods for the solution of partial differential equations with stochastic coefficients or right hand side. The discretization is performed by the stochastic finite element method (SFEM). Separation of spatial and stochastic variables in the random input data is achieved via a Karhunen-Lo{\`e}ve expansion or Wiener's polynomial chaos expansion. We discuss solution strategies for the Galerkin system that take advantage of the special structure of the system matrix. For stochastic coefficients linear in a set of independent random variables we employ Krylov subspace recycling techniques after having decoupled the large SFEM stiffness matrix.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BeranHromada,
  author    = {Beran, V{\´a}clav and Hromada, E.},
  title     = {SOFTWARE FOR PROJECT RELIABILITY ESTIMATION AND RISK EVALUATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2925},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29255},
  pages     = {16},
  abstract  = {The contribution presents a model that is able to simulate construction duration and cost for a building project. This model predicts set of expected project costs and duration schedule depending on input parameters such as production speed, scope of work, time schedule, bonding conditions and maximum and minimum deviations from scope of work and production speed. The simulation model is able to calculate, on the basis of input level of probability, the adequate construction cost and time duration of a project. The reciprocal view attends to finding out the adequate level of probability for construction cost and activity durations. Among interpretive outputs of the application software belongs the compilation of a presumed dynamic progress chart. This progress chart represents the expected scenario of development of a building project with the mapping of potential time dislocations for particular activities. The calculation of a presumed dynamic progress chart is based on an algorithm, which calculates mean values as a partial result of the simulated building project. Construction cost and time models are, in many ways, useful tools in project management. Clients are able to make proper decisions about the time and cost schedules of their investments. Consequently, building contractors are able to schedule predicted project cost and duration before any decision is finalized.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@article{Colomina2003,
  author    = {Colomina, Beatriz},
  title     = {Skinless architecture},
  doi       = {10.25643/bauhaus-universitaet.1254},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080304-13222},
  year      = {2003},
  abstract  = {Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universit{\"a}t zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{Weitzmann,
  author    = {Weitzmann, R{\"u}diger},
  title     = {SIMPLIFIED CYCLE-BASED DESIGN OF EXTREMELY LOADED STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3033},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30338},
  pages     = {14},
  abstract  = {The design of safety-critical structures, exposed to cyclic excitations demands for non-degrading or limited-degrading behavior during extreme events. Among others, the structural behavior is mainly determined by the amount of plastic cycles, completed during the excitation. Existing simplified methods often ignore this dependency, or assume/request sufficient cyclic capacity. The paper introduces a new performance based design method that considers explicitly a predefined number of re-plastifications. Hereby approaches from the shakedown theory and signal processing methods are utilized. The paper introduces the theoretical background, explains the steps of the design procedure and demonstrates the applicability with help of an example. This project was supported by German Science Foundation (Deutsche Forschungsgemeinschaft, DFG)},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Meis,
  author    = {Meis, Jochen},
  title     = {SERVICE DESIGN AND SERVICE MANAGEMENT WITH THE SERVICE BLUEPRINTING METHODOLOGY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2990},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29908},
  pages     = {11},
  abstract  = {A new application of software technology is the application area of smart living or sustainable living. Within this area application platforms are designed and realized with the goal to support value added services. In this context value added services integrates microelectronics, home automation and services to enhance the attractiveness of flats, homes and buildings. Especially real estate companies or service providers dealing with home services are interested in an effective design and management of their services. Service Engineering is the approved approach for designing customer oriented service processes. Service engineering consists of several phases; from situation analysis to service creation and service design to service management. This article will describe how the method service blueprint can be used to design service processes. Smart living includes all actions to enlarge a flat to a smart home for living. One special requirement of this application domain is the use of local components (actuators, sensors) within service processes. This article will show how this extended method supports service providers to improve the quality of customer oriented service processes and the derivation of needed interfaces of involved actors. For the civil engineering process it will be possible to derive needed information from a built in home automation system. The aim is to show, how to get needed smart local components to fullfill later offered it-supported value added services. Value added services focused on inhabitants are grouped to consulting and information, care and supervision, leisure time activities, repairs, mobility and delivery, safety and security, supply and disposal.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchapkeSchererKatranuschkov,
  author    = {Schapke, Sven-Eric and Scherer, Raimar J. and Katranuschkov, Peter},
  title     = {SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3012},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30125},
  pages     = {10},
  abstract  = {In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{GurtovyTynchuk,
  author    = {Gurtovy, O. G. and Tynchuk, S.O.},
  title     = {RESEARCH OF DEFORMATION OF MULTILAYERED PLATES ON UNDEFORMABLE BASIS BY UNFLEXURAL SPECIFIED MODEL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2961},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29613},
  pages     = {6},
  abstract  = {Stress-strain state (SSS) of multilayered plates on undeformable foundation is investigated. The settlement circuit of transverse loaded plate is formed by symmetrical attaching of a plate concerning a surface of contact to the foundation. The plate of the double thickness becomes bilateral symmetrically loaded concerning its median surface. It allows to model only unflexural deformation that reduces amount of unknown and the general order of differentiation of resolving system of the equations. The developed refined continual model takes into account deformations of transverse shear and transverse compression in high iterative approximation. Rigid contact between the foundation and a plate, and also shear without friction on a surface of contact of a plate with the foundation is considered. Calculations confirm efficiency of such approach, allowing to receive decisions which is qualitative and quantitatively close to three-dimensional solutions.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{FalcaoCruzMalonek,
  author    = {Falc{\~a}o, M. Irene and Cruz, J. F. and Malonek, Helmuth Robert},
  title     = {REMARKS ON THE GENERATION OF MONOGENIC FUNCTIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2939},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29390},
  pages     = {18},
  abstract  = { In this paper we consider three different methods for generating monogenic functions. The first one is related to Fueter's well known approach to the generation of monogenic quaternion-valued functions by means of holomorphic functions, the second one is based on the solution of hypercomplex differential equations and finally the third one is a direct series approach, based on the use of special homogeneous polynomials. We illustrate the theory by generating three different exponential functions and discuss some of their properties. Formula que se usa em preprints e artigos da nossa UI\&D (acho demasiado completo): Partially supported by the R\\&D unit \emph{Matem\'atica a Aplica\c\~es} (UIMA) of the University of Aveiro, through the Portuguese Foundation for Science and Technology (FCT), co-financed by the European Community fund FEDER.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WillenbacherHuebler2000,
  author    = {Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {Relationen zwischen Dom{\"a}nenmodellen Ansatz zur Schaffung einer integrierenden computergest{\"u}tzten Bauplanungsumgebung},
  doi       = {10.25643/bauhaus-universitaet.617},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6178},
  year      = {2000},
  abstract  = {Die zunehmend erforderliche Kooperation verschiedener Beteiligter unterschiedlicher Fachbereiche und der Einsatz hochspezialisierter Fachapplikationen in heterogenen Systemumgebungen unterstreichen die Bedeutung und Notwendigkeit neuer Konzepte und M{\"o}glichkeiten zur Schaffung einer computergest{\"u}tzten Integrationsebene. Ziel einer computergest{\"u}tzten Integrationsebene ist die Verbesserung der Kooperation und Kommunikation unter den Beteiligten. Grundlage daf{\"u}r ist die Etablierung eines effizienten und fehlerfreien Daten- und Informationsaustausches zwischen den verschiedenen Fachplanern und -applikationen. Die Basis f{\"u}r die Datenintegrationsebene bildet ein digitales Bauwerksmodell im Sinne eines >virtuellen Bauwerks<, welches alle relevanten Daten und Informationen {\"u}ber ein zu planendes oder real existierendes Bauwerk zur Verf{\"u}gung stellt. Bei der Verwirklichung einer Bauwerksmodell-orientierten Datenintegrationsebene und deren Modellverwaltung erweist sich speziell die Definition des Bauwerksmodells also die Spezifikation der relevanten auszutauschenden Daten als {\"a}ußerst komplex. Der hier vorzustellende Relationen-orientierte Ansatz, d.h. die Realisierung des Daten- und Informationsaustauschs mittels definierter Relationen und Beziehungen zwischen dynamisch modifizierbaren Dom{\"a}nenmodellen, bietet Ans{\"a}tze zur: * Verringerung und Beherrschung der Komplexit{\"a}t des Bauwerksmodells (Teilmodellbildung) * Realisierung eines effizienten Datenaustauschs (Relationenmanagement) Somit stellt der Relationenorientierte Ansatz einen ad{\"a}quaten L{\"o}sungsweg zur Modellierung eines digitalen Bauwerksmodells als Datenintegrationsebene f{\"u}r den Lebenszyklus eines Bauwerkes dar.},
  subject      = {Bauwesen},
  language  = {de}
}
@inproceedings{Krzizek2000,
  author    = {Krzizek, H.},
  title     = {Reduktion der Konstruktionsparameter von Schal- und Werkpl{\"a}nen des konstruktiven Ingenieurbaues mit rechteckigen Bauteilen durch Ber{\"u}hr- und B{\"u}ndigkeitsbedingungen},
  doi       = {10.25643/bauhaus-universitaet.601},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6013},
  year      = {2000},
  abstract  = {F{\"u}r den Entwurf der i.a. aus langen schmalen Rechtecken bestehenden Schal- bzw. Werkpl{\"a}ne wird eine Entwurfsunterst{\"u}tzung vorgestellt, bei der die Gr{\"o}ße der Rechtecke wie immer festgelegt wird, die Lage der Rechtecke aber durch topologische Angaben. Letztere bilden programmtechnisch Bedingungen, wobei zwischen Ber{\"u}hr- und B{\"u}ndigkeitsbedingen unterschieden wird. Diese Angaben positionieren das neue Rechteck im Bezug zu einem bereits platzierten. Zum Beispiel erlaubt die Angabe, die S{\"a}ule ist oberhalb des Fundamentes und belastet dieses mittig, eine eindeutige Festlegung der Lage der S{\"a}ule bei gegebener Lage des Fundamentes und gegebenen Abmessungen beider Rechtecke. Die Formulierung mittels Bedingungen hat den Vorteil daß diese auch bei {\"A}nderung von Abmessungen g{\"u}ltig bleiben. Die hier vorgestellte Eingabeart der relativen Positionierung ist eine Erweiterung des Orthomodus, wie er bei Bau-CAD-Programmen stets gefunden wird.},
  subject      = {CAD},
  language  = {de}
}
@inproceedings{MahdaviMathewHartkopf1997,
  author    = {Mahdavi, A. and Mathew, P. and Hartkopf, V.},
  title     = {Real-time Coupling of Multi-Domain Representational and Analytical Building Object Models via Homology-based Mapping},
  doi       = {10.25643/bauhaus-universitaet.446},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4461},
  year      = {1997},
  abstract  = {Ideally, multiple computational building evaluation routines (particularly simulation tools) should be coupled in real-time to the representational design model to provide timely performance feed-back to the system user. In this paper we demonstrate how this can be achieved effectively and conveniently via homology-based mapping. We consider two models as homologous if they entail isomorphic topological information. If the general design representation (i.e., a shared object model) is generated in a manner so as to include both the topological building information and pointers to the semantic information base, it can be used to directly derive the domain representations (>enriched< object models with detailed configurational information and filtered semantic data) needed for evaluation purposes. As a proof of concept, we demonstrate a computational design environment that dynamically links an object-oriented space-based design model, with structurally homologous object models of various simulation routines.},
  subject      = {Geb{\"a}ude},
  language  = {en}
}
@inproceedings{MenzelGarrettMahdavietal.1997,
  author    = {Menzel, Karsten and Garrett, James H. and Mahdavi, A. and Ries, R.},
  title     = {Processing "fuzzy" materials sets for environmental impact analysis of buildings},
  doi       = {10.25643/bauhaus-universitaet.450},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4500},
  year      = {1997},
  abstract  = {Processing technical and environmental data on building materials, components, and systems has become more important during the last few years. Increased sensitivity towards environmental and energy problems has lead to the demand for simulation and evaluation of the long term behavior of buildings. The results of such simulations are expected to enable architects and engineers to develop a broader, interdisciplinary understanding of the impact of their products (buildings) on the environment. However, conducting such evaluations is currently hampered by the lack of comprehensive, up-to-date, and ecologically relevant data on building materials, components, and systems. To address this problem, this paper proposes an approach to deal with the absent or uncertain attributes of building materials, components, and systems. In the past, various information systems have been developed to provide data on a limited set of building materials, including precise values pertaining to some of their characteristics, such as availability, manufacturers, costs, etc. These traditional information systems have difficulty in dealing with uncertain, incomplete and sparse data. However, uncertainty and incompleteness characterize the nature of most of the available and environmentally related characteristics of materials, components, and systems. In this paper, a fuzzy-logic-based augmentation of traditional information systems is proposed towards providing management, utilization and manipulation of incomplete and uncertain data.},
  subject      = {Bauwerk},
  language  = {en}
}
@article{Naginskaja1987,
  author    = {Naginskaja, Valentina},
  title     = {Probleme der Nutzung der Rechentechnik in der Projektierung},
  doi       = {10.25643/bauhaus-universitaet.1045},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-10451},
  year      = {1987},
  abstract  = {Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule f{\"u}r Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche'},
  subject      = {CAD},
  language  = {de}
}
@inproceedings{Skowronek,
  author    = {Skowronek, Marek},
  title     = {PROBABILISTIC LIMIT STATE ANALYSIS OF MONUMENTAL STRUCTURE BY MONTE CARLO SIMULATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3022},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30222},
  pages     = {10},
  abstract  = {The concept is presented of the sensitivity analysis of the limit state of the structure with respect to selected basic variables. The sensitivity is presented in the form of the probability distribution of the limit state of the structure. The analysis is performed by the problem-oriented Monte Carlo simulation procedure. The procedure is based on the problem's definition of the elementary event, as a structural limit state. Thus the sample space consists of limit states of the structure. Defined on the sample space the one-dimensional random multiplier is introduced. This multiplier refers to the dominant basic variable (group of variables) of the problem. Numerical procedure results in the set of random numbers. Normalized relative histogram of this set is an estimator of the PDF of the limit state of the structure. Estimators of reliability, or the probability of failure are statistical characteristics of this histogram. The procedure is illustrated by the example of sensitivity analysis of the serviceability limit state of monumental structure. It is the colonnade of Licheń Basilica, situated in central Poland. Limit state of the structure is examined with reference to the upper deck horizontal deflection. Wind actions are taken as dominant variables. An assumption is made that the wind load intensities acting on the lower and on the upper storey of the colonnade, respectively, are identically distributed, but correlated random variables. Three correlation variants of these variables are considered. Relevant limit state histograms are analysed thereafter. The paper ends with the conclusions referring to the method and some general remarks on the fully probabilistic design.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{TrummerDenzlerSuesse,
  author    = {Trummer, Michael and Denzler, J. and S{\"u}ße, Herbert},
  title     = {PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3028},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30282},
  pages     = {8},
  abstract  = {The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Loemker2003,
  author    = {L{\"o}mker, Thorsten Michael},
  title     = {Plausibilit{\"a}t im Planungsprozess - Digitale Planungshilfen f{\"u}r die Bebaubarkeit von Grundst{\"u}cken},
  doi       = {10.25643/bauhaus-universitaet.329},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3296},
  year      = {2003},
  abstract  = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< werden Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung entwickelt. Die Vielfalt der unterschiedlichen Faktoren, die Einfluss auf den Planungsprozess nehmen k{\"o}nnen, sowie deren Abh{\"a}ngigkeiten voneinander werden von heutigen Planungssystemen in nur unzureichender Weise aufbereitet und verwaltet. Diese Faktoren bedingen Planungstools, deren Aufgabe die Beschaffung, Verarbeitung, Integration und Verwaltung von Informationen sowie die Veranschaulichung der komplexen Informationszusammenh{\"a}nge ist. Die Entwicklung solcher Systeme ist technisch m{\"o}glich. Die Schwierigkeit liegt in der Beschaffung und Strukturierung der f{\"u}r den Planungsprozess relevanten Informationen sowie in ihrer Aufbereitung und Integration in eine digitale Planungsumgebung. Das Bestreben des Forschungsprojektes ist es, Grundlagen f{\"u}r digitale Werkzeuge zu entwickeln die zu plausiblen L{\"o}sungen im Planungsprozess und somit zu erh{\"o}hter Planungssicherheit f{\"u}r die am Bau beteiligten Auftragnehmer und Auftraggeber f{\"u}hren. Es wird angestrebt Programm-Module zu entwickeln, die den Planer bei der Ermittlung von L{\"o}sungswegen zu einer Fachfrage inhaltlich unterst{\"u}tzen und die Nachvollziehbarkeit und Richtigkeit einer Planungsentscheidung gew{\"a}hrleisten und plausibel darlegen. Mit Hilfe der Module sollen Entscheidungsfindungen katalysiert werden. Die Bauvorhaben der Zukunft werden zu einem großen Teil im Bestand liegen. Dieses Faktum erfordert planerische Maßnahmen, f{\"u}r die vollends Werkzeuge und Hilfsmittel fehlen, die zu plausiblen und sicheren Planungsentscheidungen f{\"u}hren. Die Entwicklung solcher Hilfsmittel ist Ziel dieser Forschung. Der Beitrag stellt prototypische Software-Module vor, die sich mit der Problematik der potenziellen Bebaubarkeit einer Grundst{\"u}cksfl{\"a}che auseinander setzen. Die Module verarbeiten Regeln, die den einschl{\"a}gigen Normen und Verordnungen entnommen sind, die bei der Erarbeitung einer Planungsl{\"o}sung eingehalten werden m{\"u}ssen.},
  subject      = {Bauplanung},
  language  = {de}
}
@inproceedings{HoffmannKornadt,
  author    = {Hoffmann, Sabine and Kornadt, Oliver},
  title     = {PHASEN{\"U}BERGANGSMATERIALIEN ALS PASSIVE W{\"A}RMESPEICHER IN REVITALISIERUNGSOBJEKTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2969},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29699},
  pages     = {12},
  abstract  = {Summer overheating in buildings is a common problem, especially in office buildings with large glazed facades, high internal loads and low thermal mass. Phase change materials (PCM) that undergo a phase transition in the temperature range of thermal comfort can add thermal mass without increasing the structural load of the building. The investigated PCM were micro-encapsulated and mixed into gypsum plaster. The experiments showed a reduction of indoor-temperature of up to 4 K when using a 3 cm layer of PCM-plaster with micro-encapsulated paraffin. The measurement results could validate a numerical model that is based on a temperature dependent function for heat capacity. Thermal building simulation showed that a 3 cm layer of PCM-plaster can help to fulfil German regulations concerning heat protection of buildings in summer for most office rooms.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{ErlemannHartmann,
  author    = {Erlemann, Kai and Hartmann, Dietrich},
  title     = {PARALLELIZATION OF A MICROSCOPIC TRAFFIC SIMULATION SYSTEM USING MPIJAVA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2951},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29516},
  pages     = {8},
  abstract  = {Traffic simulation is a valuable tool for the design and evaluation of road networks. Over the years, the level of detail to which urban and freeway traffic can be simulated has increased steadily, shifting from a merely qualitative macroscopic perspective to a very detailed microscopic view, where the behavior of individual vehicles is emulated realistically. With the improvement of behavioral models, however, the computational complexity has also steadily increased, as more and more aspects of real-life traffic have to be considered by the simulation environment. Despite the constant increase in computing power of modern personal computers, microscopic simulation stays computationally expensive, limiting the maximum network size than can be simulated on a single-processor computer in reasonable time. Parallelization can distribute the computing load from a single computer system to a cluster of several computing nodes. To this end, the exisiting simulation framework had to be adapted to allow for a distributed approach. As the simulation is ultimately targeted to be executed in real-time, incorporating real traffic data, only a spatial partition of the simulation was considered, meaning the road network has to be partitioned into subnets of comparable complexity, to ensure a homogenous load balancing. The partition process must also ensure, that the division between subnets does only occur in regions, where no strong interaction between the separated road segments occurs (i.e. not in the direct vicinity of junctions). In this paper, we describe a new microscopic reasoning voting strategy, and discuss in how far the increasing computational costs of these more complex behaviors lend themselves to a parallelized approach. We show the parallel architecture employed, the communication between computing units using MPIJava, and the benefits and pitfalls of adapting a single computer application to be used on a multi-node computing cluster.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EbertLenzen,
  author    = {Ebert, Carsten and Lenzen, Armin},
  title     = {OUTPUT-ONLY ANALYSIS FOR EXPERIMENTAL DAMAGE DETECTION OF A TIED-ARCH BRIDGE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2945},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29452},
  pages     = {13},
  abstract  = {In civil engineering it is very difficult and often expensive to excite constructions such as bridges and buildings with an impulse hammer or shaker. This problem can be avoided with the output-only method as special feature of stochastic system identification. The permanently existing ambient noise (e.g. wind, traffic, waves) is sufficient to excite the structures in their operational conditions. The output-only method is able to estimate the observable part of a state-space-model which contains the dynamic characteristics of the measured mechanical system. Because of the assumption that the ambient excitation is white there is no requirement to measure the input. Another advantage of the output-only method is the possibility to get high detailed models by a special method, called polyreference setup. To pretend the availability of a much larger set of sensors the data from varying sensor locations will be collected. Several successive data sets are recorded with sensors at different locations (moving sensors) and fixed locations (reference sensors). The covariance functions of the reference sensors are bases to normalize the moving sensors. The result of the following subspace-based system identification is a high detailed black-box-model that contains the weighting function including the well-known dynamic parameters eigenfrequencies and mode shapes of the mechanical system. Emphasis of this lecture is the presentation of an extensive damage detection experiment. A 53-year old prestressed concrete tied-arch-bridge in H{\"u}nxe (Germany) was deconstructed in 2005. Preliminary numerous vibration measurements were accomplished. The first experiment for system modification was an additional support near the bridge bearing of one main girder. During a further experiment one hanger from one tied arch was cut through as an induced damage. Some first outcomes of the described experiments will be presented.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}