@inproceedings{ZolotovAkimovSidorov,
  author    = {Zolotov, Alexander B. and Akimov, Pavel and Sidorov, Vladimir},
  title     = {DISCRETE-CONTINUAL BOUNDARY ELEMENT METHODS OF ANALYSIS FOR TWO-DIMENSIONAL AND THREE-DIMENSIONAL STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3041},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30419},
  pages     = {22},
  abstract  = {The aim of this paper is to present so-called discrete-continual boundary element method (DCBEM) of structural analysis. Its field of application comprises buildings constructions, structures and also parts and components for the residential, commercial and un-inhabitant structures with invariability of physical and geometrical parameters in some dimensions. We should mention here in particular such objects as beams, thin-walled bars, strip foundations, plates, shells, deep beams, high-rise buildings, extensional buildings, pipelines, rails, dams and others. DCBEM comes under group of semianalytical methods. Semianalytical formulations are contemporary mathematical models which currently becoming available for realization due to substantial speed-up of computer productivity. DCBEM is based on the theory of the pseudodifferential boundary equations. Corresponding pseudodifferential operators are discretely approximated using Fourier analysis or wavelet analysis. The main DCBEM advantages against the other methods of the numerical analysis is a double reduction in dimension of the problem (discrete numerical division applied not to the full region of the interest but only to the boundary of the region cross section, as a matter of fact one is solving an one-dimensional problem with the finite step on the boundary area of the region), one has opportunities to carrying out very detailed analysis of the specific chosen zones, simplified initial data preparation, simplistic and adaptive algorithms. There are two methods to define and conduct DCBEM analysis developed - indirect (IDCBEM) and direct (DDCBEM), thus indirect like in boundary element method (BEM) applied and used little bit more than direct.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ZimmermannBartels,
  author    = {Zimmermann, J{\"u}rgen and Bartels, Jan-Hendrik},
  title     = {TREE-BASED METHODS FOR RESOURCE INVESTMENT AND RESOURCE LEVELLING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3040},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30405},
  pages     = {6},
  abstract  = {The execution of project activities generally requires the use of (renewable) resources like machines, equipment or manpower. The resource allocation problem consists in assigning time intervals to the execution of the project activities while taking into account temporal constraints between activities emanating from technological or organizational requirements and costs incurred by the resource allocation. If the total procurement cost of the different renewable resources has to be minimized we speak of a resource investment problem. If the cost depends on the smoothness of the resource utilization over time the underlying problem is called a resource levelling problem. In this paper we consider a new tree-based enumeration method for solving resource investment and resource levelling problems exploiting some fundamental properties of spanning trees. The enumeration scheme is embedded in a branch-and-bound procedure using a workload-based lower bound and a depth first search. Preliminary computational results show that the proposed procedure is promising for instances with up to 30 activities.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ZangSommer,
  author    = {Zang, Di and Sommer, G.},
  title     = {ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3039},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30396},
  pages     = {10},
  abstract  = {We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WoszczynaKaminskiMajetal.,
  author    = {Woszczyna, Anna and Kaminski, Mieczysław and Maj, Marek and Ubysz, Andrzej},
  title     = {ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3038},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30388},
  pages     = {7},
  abstract  = {Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Wolny2006,
  type      = {Master Thesis},
  author    = {Wolny, Petra},
  title     = {Analyse der Trag- und Funktionsf{\"a}higkeit von Lagern und Pfeilern bei unterschiedlichen Sicherheitskonzepten},
  doi       = {10.25643/bauhaus-universitaet.751},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7516},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Bemessung der Lager und Pfeiler einer f{\"u}nffeldrigen zweistegigen vorgespannten Plattenbalkenbr{\"u}cke in Massivbauweise; Analyse der Einwirkungen, der Kr{\"a}fte und Bewegungen in den Lagerungspunkten sowie der Lager und Pfeiler;},
  subject      = {Analyse},
  language  = {de}
}
@inproceedings{WolkowiczRuthStahr,
  author    = {Wolkowicz, Christian and Ruth, J{\"u}rgen and Stahr, Alexander},
  title     = {TOOL TO CHECK TOPOLOGY AND GEOMETRY FOR SPATIAL STRUCTURES ON BASIS OF THE EXTENDED MAXWELL'S RULE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3037},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30370},
  pages     = {8},
  abstract  = {One of the simplest principle in the design of light-weight structures is to avoid bending. This can be achieved by dissolving girders into members acting purely in axial tension or compression. The employment of cables for the tensioned members leads to even lighter structures which are called cable-strut structures. They constitute a subclass of spatial structures. To give fast information about the general feasibility of an architectural concept employing cable-strut structures is a challenging task due to their sophisticated mechanical behavior. In this regard it is essential to control if the structure is stable and if pre-stress can be applied. This paper presents a tool using the spreadsheet software Microsoft (MS) Excel which can give such information. Therefore it is not necessary to purchase special software and the according time consuming training is much lower. The tool was developed on basis of the extended Maxwell's rule, which besides topology also considers the geometry of the structure. For this the rank of the node equilibrium matrix is crucial. Significance and determination of the rank and the implementation of the corresponding algorithms in MS Excel are described in the following. The presented tool is able to support the structural designer in an early stage of the project in finding a feasible architectural concept for cable-strut structures. As examples for the application of the software tool two special cable-strut structures, so called tensegrity structures, were examined for their mechanical behavior.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Wolff2006,
  author    = {Wolff, Ulrich},
  title     = {Die richtige Weiterbildung f{\"u}r den systematischen Kompetenzaufbau},
  doi       = {10.25643/bauhaus-universitaet.848},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8480},
  year      = {2006},
  subject      = {Weimar / Bauhaus-Universit{\"a}t / Professur Baubetrieb und Bauverfahren},
  language  = {de}
}
@inproceedings{WittwerBecker,
  author    = {Wittwer, Christof and Becker, Rainer},
  title     = {MODELLBASIERTE ERTRAGSKONTROLLE F{\"U}R PV ANLAGEN IN VERNETZTEN GEB{\"A}UDEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3036},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30363},
  pages     = {5},
  abstract  = {Subject of the paper is the realisation of a model based efficiency control system for PV generators using a simulation model. A standard 2-diodes model of PV generator is base of the ColSim model, which is implemented in ANSI C code for flexible code exporting. The algorithm is based on discretisized U-I characteristics, which allows the calculation of string topologies witch parallel and serial PV cells and modules. Shadowing effects can be modelled down to cell configuration using polar horizon definitions. The simulation model was ported to a real time environment, to calculate the efficiency of a PV system. Embedded System technology allows the networked operation and the integration of standard I/O devices. Futher work focus on the adaption of shadowing routine, which will be adapted to get the environment conditions from the real operation.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Wittenberg,
  author    = {Wittenberg, Reinhold},
  title     = {AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3035},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30356},
  pages     = {7},
  abstract  = {Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gr{\"u}nde hierf{\"u}r sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings fr{\"u}hzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation st{\"a}ndig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete m{\"o}glich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende erm{\"o}glicht, dass gravierende Ver{\"a}nderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management fr{\"u}hzeitig (im Sinne eines Fr{\"u}hwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelm{\"a}ßig gepr{\"u}ft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren {\"u}berpr{\"u}ft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht verg{\"u}tet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verf{\"u}gung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@unpublished{WetzsteinBimber2006,
  author    = {Wetzstein, Gordon and Bimber, Oliver},
  title     = {A Generalized Approach to Radiometric},
  doi       = {10.25643/bauhaus-universitaet.762},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7625},
  year      = {2006},
  abstract  = {We propose a novel method that applies the light transport matrix for performing an image-based radiometric compensation which accounts for all possible types of light modulation. For practical application the matrix is decomposed into clusters of mutually influencing projector and camera pixels. The compensation is modeled as a linear system that can be solved with respect to the projector patterns. Precomputing the inverse light transport in combination with an efficient implementation on the GPU makes interactive compensation rates possible. Our generalized method unifies existing approaches that address individual problems. Based on examples, we show that it is possible to project corrected images onto complex surfaces such as an inter-reflecting statuette, glossy wallpaper, or through highly-refractive glass. Furthermore, we illustrate that a side-effect of our approach is an increase in the overall sharpness of defocused projections.},
  subject      = {Association for Computing Machinery / Special Interest Group on Graphics},
  language  = {en}
}
@misc{Wetzstein2006,
  type      = {Master Thesis},
  author    = {Wetzstein, Gordon},
  title     = {Radiometric Compensation of Global Illumination Effects with Projector-Camera Systems},
  doi       = {10.25643/bauhaus-universitaet.810},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8106},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Projector-based displays have been evolving tremendously in the last decade. Reduced costs and increasing capabilities have let to a widespread use for home entertainment and scientific visualization. The rapid development is continuing - techniques that allow seamless projection onto complex everyday environments such as textured walls, window curtains or bookshelfs have recently been proposed. Although cameras enable a completely automatic calibration of the systems, all previously described techniques rely on a precise mapping between projector and camera pixels. Global illumination effects such as reflections, refractions, scattering, dispersion etc. are completely ignored since only direct illumination is taken into account. We propose a novel method that applies the light transport matrix for performing an image-based radiometric compensation which accounts for all possible lighting effects. For practical application the matrix is decomposed into clusters of mutually influencing projector and camera pixels. The compensation is modeled as a linear equation system that can be solved separately for each cluster. For interactive compensation rates this model is adapted to enable an efficient implementation on programmable graphics hardware. Applying the light transport matrix's pseudo-inverse allows to separate the compensation into a computational expensive preprocessing step (computing the pseudo-inverse) and an on-line matrix-vector multiplication. The generalized mathematical foundation for radiometric compensation with projector-camera systems is validated with several experiments. We show that it is possible to project corrected imagery onto complex surfaces such as an inter-reflecting statuette and glass. The overall sharpness of defocused projections is increased as well. Using the proposed optimization for GPUs, real-time framerates are achieved.},
  subject      = {Association for Computing Machinery / Special Interest Group on Graphics},
  language  = {en}
}
@inproceedings{WenderWillenbacherHuebler,
  author    = {Wender, K. and Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {BENUTZERAD{\"A}QUATE NAVIGATIONS- UND RECHERCHETECHNOLOGIEN F{\"U}R VERTEILTE DYNAMISCHE DIGITALE BAUWERKSMODELLE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3034},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30349},
  pages     = {13},
  abstract  = {Hinsichtlich der Integration einzelner Bauwerkslebensphasen und der verschiedenen Beteiligten, insbesondere innerhalb von Bauplanungs- und Revitalisierungsprozessen, bestehen aktuell entscheidende Defizite. Die generelle Zielstellung der in diesem Beitrag vorgestellten Forschungsarbeiten besteht in der Unterst{\"u}tzung und Verbesserung der Integration durch die disziplin- und lebensphasen{\"u}bergreifende Bereitstellung s{\"a}mtlicher bauwerksbezogener Informationen. Dies erfordert einerseits geeignete Ans{\"a}tze zur Modellierung und Integration der vielf{\"a}ltigen disziplinspezifischen Daten, andererseits geeignete L{\"o}sungen, die einen globalen Zugriff, Navigation und Recherche im Gesamtdatenbestand erm{\"o}glichen. Die Modellierung und Verwaltung bauwerksbezogener Daten ist seit l{\"a}ngerem Gegenstand diverser Forschungsarbeiten. Im Rahmen des SFB 524 wurde ein eigener Ansatz basierend auf einem laufzeitdynamischen Partialmodellverbund entwickelt. Dieser wird in den wesentlichen Grundz{\"u}gen anderen Ans{\"a}tzen gegen{\"u}bergestellt. Den Schwerpunkt dieses Beitrags bildet jedoch die Entwicklung einer geeigneten flexiblen Navigations- und Rechercheschicht zu Realisierung projektglobaler Informationsrecherche. Aus der Sicht der Modellierung und Datenverwaltung wie auch aus der Sicht der Informationsrecherche und Informationspr{\"a}sentation in Planungsprozessen ergeben sich verschiedene Anforderungen an derartige Recherchewerkzeuge, wobei der wesentlichste Grundsatz maximale Flexibilit{\"a}t hinsichtlich verf{\"u}gbarer Darstellungstechniken und deren freie Kombination mit Techniken formaler Suchanfragen ist. Das entwickelte Systemkonzept basiert auf einem Framework, welches verschiedene Grundtypen von Recherchemodulen und deren Interaktionsprinzipien vorgibt. Einzelne Recherchemodule werden als Auspr{\"a}gungen dieser Modultypen realisiert und k{\"o}nnen je nach Bedarf laufzeitdynamisch in die Navigationsschicht integriert werden. Die technische Realisierung des Systems erfolgt im Umfeld vorhandener Prototypen aus vorangegangenen Forschungsaktivit{\"a}ten. Dieses technische Umfeld gibt verschiedene Rahmenbedingungen vor, welche im Vorfeld prototypischer Implementierungen verschiedene Adaptionen des generellen Systemkonzepts notwendig machen. Der vorliegende Beitrag stellt den aktuellen Entwicklungsstand der Systeml{\"o}sung aus konzeptioneller und technischer Sicht sowie erste prototypische Realisierungen von Recherchemodulen vor.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Weitzmann,
  author    = {Weitzmann, R{\"u}diger},
  title     = {SIMPLIFIED CYCLE-BASED DESIGN OF EXTREMELY LOADED STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3033},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30338},
  pages     = {14},
  abstract  = {The design of safety-critical structures, exposed to cyclic excitations demands for non-degrading or limited-degrading behavior during extreme events. Among others, the structural behavior is mainly determined by the amount of plastic cycles, completed during the excitation. Existing simplified methods often ignore this dependency, or assume/request sufficient cyclic capacity. The paper introduces a new performance based design method that considers explicitly a predefined number of re-plastifications. Hereby approaches from the shakedown theory and signal processing methods are utilized. The paper introduces the theoretical background, explains the steps of the design procedure and demonstrates the applicability with help of an example. This project was supported by German Science Foundation (Deutsche Forschungsgemeinschaft, DFG)},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Wehner2006,
  type      = {Master Thesis},
  author    = {Wehner, Diana},
  title     = {Dynamische Analyse der Dreiturmanlage der St. Severikirche in Erfurt},
  doi       = {10.25643/bauhaus-universitaet.741},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7410},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Im Zusammenhang mit der gegenw{\"a}rtigen Zustandsbewertung und geplanten Sanierung der Dreiturmanlage der St. Severikirche in Erfurt wird eine dynamische Analyse unter Glockenl{\"a}uten mit Hilfe eines Finite-Elemente-Modells durchgef{\"u}hrt. Mit diesem unter Verwendung des Programms SLang erstellten FE-Modell wird das Schwingungsverhalten der Dreiturmanlage nachgebildet. Dabei dient als Grundlage die zuvor erfolgte Schwingungsmessung. Mit dem angepassten Modell werden schwingungsreduzierende Maßnahmen hinsichtlich ihrer Wirksamkeit untersucht und bewertet. Weiterhin wird an Ersatzsystemen die aktive Schwingungsisolierung mittels Glockenstuhlunterkonstruktion und der Einbau eines passiven Tilgerd{\"a}mpfers betrachtet.},
  subject      = {Dynamische Analyse},
  language  = {de}
}
@inproceedings{WallFoersterNeumannetal.,
  author    = {Wall, Wolfgang A. and F{\"o}rster, Christiane and Neumann, Malte and Ramm, Ekkehard},
  title     = {ADVANCES IN FLUID-STRUCTURE INTERACTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2916},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29161},
  pages     = {17},
  abstract  = {For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements. Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Volkova,
  author    = {Volkova, Viktorija},
  title     = {APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3032},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30329},
  pages     = {7},
  abstract  = {The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration - displacement". Unlike the trajectories mapping in a plane "velocity - displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@article{UngerTeughelsDeRoeck,
  author    = {Unger, J{\"o}rg F. and Teughels, A. and De Roeck, G.},
  title     = {System identification and damage detection of a prestressed concrete beam},
  series = {Journal of Structural Engineering},
  journal   = {Journal of Structural Engineering},
  pages     = {1691 -- 1698},
  abstract  = {System identification and damage detection of a prestressed concrete beam},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{UngerKoenke,
  author    = {Unger, J{\"o}rg F. and K{\"o}nke, Carsten},
  title     = {DISCRETE CRACK SIMULATION OF CONCRETE USING THE EXTENDED FINITE ELEMENTMETHOD},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3030},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30303},
  pages     = {12},
  abstract  = {The extended finite element method (XFEM) offers an elegant tool to model material discontinuities and cracks within a regular mesh, so that the element edges do not necessarily coincide with the discontinuities. This allows the modeling of propagating cracks without the requirement to adapt the mesh incrementally. Using a regular mesh offers the advantage, that simple refinement strategies based on the quadtree data structure can be used to refine the mesh in regions, that require a high mesh density. An additional benefit of the XFEM is, that the transmission of cohesive forces through a crack can be modeled in a straightforward way without introducing additional interface elements. Finally different criteria for the determination of the crack propagation angle are investigated and applied to numerical tests of cracked concrete specimens, which are compared with experimental results.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Ubysz,
  author    = {Ubysz, Andrzej},
  title     = {MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3029},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30294},
  pages     = {7},
  abstract  = {The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro-creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{TrummerDenzlerSuesse,
  author    = {Trummer, Michael and Denzler, J. and S{\"u}ße, Herbert},
  title     = {PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3028},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30282},
  pages     = {8},
  abstract  = {The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Traversoni,
  author    = {Traversoni, Leonardo},
  title     = {MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3027},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30274},
  pages     = {8},
  abstract  = {We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic {\O}lms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Trautermann2006,
  type      = {Master Thesis},
  author    = {Trautermann, Ronny},
  title     = {Numerische Untersuchungen zum Verzug eines Feinkornbaustahles beim MAG-Schweißen},
  doi       = {10.25643/bauhaus-universitaet.755},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7550},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Die Diplomarbeit leistet einen Betrag zur numerischen Untersuchung des Verzuges eines Feinkornbaustahles beim MAG-Schweißen. Ziel dabei war es, Informationen zu dem schweißbedingten Verzug beeinflussenden Gr{\"o}ßen zusammenzustellen, Angaben zu m{\"o}glichen Berechnungsformeln des an einer T-Stoßverbindung durch das Schweißen entstehenden Winkelverzuges des Gurtes zu recherchieren und die Grundlagen f{\"u}r eine Verzugsberechnung mit Hilfe der Finite-Element-Methode darzustellen. Das Hauptinteresse lag dabei jedoch auf den durch das Schweißen von Kehln{\"a}hten entstehenden Winkelverzuges des Gurtes an T-Stoßverbindungen. Dieser wurde mit Hilfe numerischer Berechnungen untersucht. Dabei wurden die Einfl{\"u}sse, welche geometrischen, werkstofflichen oder verfahrensbedingten Ursprungs seien k{\"o}nnen, betrachtet.},
  subject      = {MAG-Schweißen},
  language  = {de}
}
@inproceedings{SzolomickiBaranski,
  author    = {Szolomicki, Jerzy Pawel and Baranski, Jacek},
  title     = {COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30265},
  pages     = {7},
  abstract  = {In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SzarataStarostina,
  author    = {Szarata, Andrzej and Starostina, T.},
  title     = {MAMDANI'S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3025},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30257},
  pages     = {1},
  abstract  = {This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{StoimenovaLinsDatchevaetal.,
  author    = {Stoimenova, Eugenia and Lins, Yvonne and Datcheva, Maria and Schanz, Tom},
  title     = {INVERSE MODELLING OF SOIL HYDRAULIC CHARACTERISTIC FUNCTIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2985},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29858},
  pages     = {12},
  abstract  = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content θ and suction ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of θ for any position along the column and (b) give the functional form for the scanning curves.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Stangenberg,
  author    = {Stangenberg, Friedhelm},
  title     = {LIFETIME ORIENTED DESIGN CONCEPTS UNDER ASPECTS OF DEGRADATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2915},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170328-29154},
  pages     = {25},
  abstract  = {Optimum technological solutions must take into account the entire life cycle of structures including design procedures as well as quality assurance, inspection, maintenance, and repair strategies. Unfortunately, current design standards do not provide a satisfactory basis to ensure expected structural lifetimes. The latter may vary from only a few years for temporary structures to over a century for bridges, water dams or nuclear repositories. Consistent scientific concepts are urgently required to cover this wide spectrum of lifetimes in structural design and maintenance. This was a motivation for a group of scientists at the Ruhr-University Bochum (RUB) to start a special research program supported by the German Research Foundation (DFG) within the Cooperative Research Center SFB 398 since 1996. Institutes of the University Wuppertal and of the University Essen-Duisburg joined the research group. The goal of the Center is to study sources of damage and deterioration in materials and structures, to develop consistent models and simulation methods, to predict structural lifetimes and finally to integrate this predictions into new lifetime-oriented design strategies. Research activities in our center are organised in three Project Groups as follows: - Modelling of lifetime effects - Methods for lifetime-oriented structural analyses - Future lifespan-oriented design strategies.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{StahrRuthWolkowicz,
  author    = {Stahr, Alexander and Ruth, J{\"u}rgen and Wolkowicz, Christian},
  title     = {... WITHOUT RIGHT ANGLE.},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3024},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30248},
  pages     = {8},
  abstract  = {Currently sculptural design is one of the most discussed themes in architecture. Due to their light weight, easy transportation and assembly, as well as an almost unlimited structural variety, parameterised spatial structures are excellently suited for constructive realisation of free formed claddings. They subdivide the continuous surface into a structure of small sized nodes, straight members and plane glass panels. Thus they provide an opportunity to realise arbitrary double-curved claddings with a high degree of transparency, using industrial semi-finished products (steel sections, flat glass). Digital design strategies and a huge number of similar looking but in detail unique structural members demand a continuous digital project handling. Within a research project, named MYLOMESH, a free-formed spatial structure was designed, constructed, fabricated and assembled. All required steps were carried out based on digital data. Different digital connections (scripts) between varying software tools, which are usually not used in the planning process of buildings, were created. They allow a completely digital workflow. The project, its design, meshing, constructive detailing and the above-mentioned scripts are described in this paper.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SpiekermannDonath,
  author    = {Spiekermann, Christoph and Donath, Dirk},
  title     = {DIGITAL SUPPORT OF MATERIAL- AND PRODUCT SELECTION IN THE ARCHITECTURAL DESIGN- AND PLANNING PROCESS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3023},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30235},
  pages     = {10},
  abstract  = {Architecture is predominantly perceived over the surfaces limiting the space. The used surface materials thereby should support the design intention and have to fulfil various technical and economical requirements. If the architect wants to select the "right" or the "best" material he has to play with very different and sometimes contradicting criteria and must weight these individually for the special purpose. This selection process is supported only insufficiently by today's digital systems. If it would be possible to illustrate all the various parameters by numerical values, the method of multidimensional scaling will offer a solution for architects to find the material which is best fitting on basis of his individual weighting of criteria. By displaying the result of the architect's multidimensional query in a spatial arrangement multidimensional scaling can support an interactive selection process with additional feedback over the applied search strategy.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Sorge2006,
  author    = {Sorge, Hans-Christian},
  title     = {Technische Zustandsbewertung metallischer Wasserversorgungsleitungen als Beitrag zur Rehabilitationsplanung},
  doi       = {10.25643/bauhaus-universitaet.813},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070516-8681},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Die Instandhaltung der st{\"a}dtischen Trinkwassernetze ist Aufgabenschwerpunkt der Wasserversorgungsunternehmen bzw. Netzbetreiber. Dazu notwendige Rehabilitationsplanungen st{\"u}tzen sich zurzeit weitgehend auf die Trendprognose von Schadensraten und die Erfahrungen der Mitarbeiter. Der Einfluss wesentlicher Kenngr{\"o}ßen wie Werkstoffeigenschaften oder die Resttragf{\"a}higkeit des Rohres bleiben hierbei gr{\"o}ßtenteils unber{\"u}cksichtigt. {\"U}ber materialtechnische Untersuchungen werden die notwendigen Kenngr{\"o}ßen ermittelt, die eine zuverl{\"a}ssige Bewertung des technischen Zustands des Rohrstrangs erm{\"o}glichen. So lassen sich die Prognose der technischen Nutzungsdauer und Rehabilitationsplanungen auf eine solide Basis stellen. In dieser Dissertationsschrift wird hierzu ein Untersuchungs- und Bewertungsalgorithmus mit integrierten Prognoseverfahren erarbeitet.},
  subject      = {Instandhaltungsplanung},
  language  = {de}
}
@inproceedings{Skowronek,
  author    = {Skowronek, Marek},
  title     = {PROBABILISTIC LIMIT STATE ANALYSIS OF MONUMENTAL STRUCTURE BY MONTE CARLO SIMULATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3022},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30222},
  pages     = {10},
  abstract  = {The concept is presented of the sensitivity analysis of the limit state of the structure with respect to selected basic variables. The sensitivity is presented in the form of the probability distribution of the limit state of the structure. The analysis is performed by the problem-oriented Monte Carlo simulation procedure. The procedure is based on the problem's definition of the elementary event, as a structural limit state. Thus the sample space consists of limit states of the structure. Defined on the sample space the one-dimensional random multiplier is introduced. This multiplier refers to the dominant basic variable (group of variables) of the problem. Numerical procedure results in the set of random numbers. Normalized relative histogram of this set is an estimator of the PDF of the limit state of the structure. Estimators of reliability, or the probability of failure are statistical characteristics of this histogram. The procedure is illustrated by the example of sensitivity analysis of the serviceability limit state of monumental structure. It is the colonnade of Licheń Basilica, situated in central Poland. Limit state of the structure is examined with reference to the upper deck horizontal deflection. Wind actions are taken as dominant variables. An assumption is made that the wind load intensities acting on the lower and on the upper storey of the colonnade, respectively, are identically distributed, but correlated random variables. Three correlation variants of these variables are considered. Relevant limit state histograms are analysed thereafter. The paper ends with the conclusions referring to the method and some general remarks on the fully probabilistic design.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Siekierski,
  author    = {Siekierski, Wojciech},
  title     = {VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3021},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30217},
  pages     = {8},
  abstract  = {The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one - on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection - with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Shapiro,
  author    = {Shapiro, Michael},
  title     = {ON HYPERHOLOMORPHIC POLYNOMIALS FOR THE CAUCHY-RIEMANN AND THE DIRAC OPERATORS OF CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3020},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30201},
  pages     = {1},
  abstract  = {Clifford Analysis, hyperholomorphic polynomials, Taylor Series.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SeylerSchwarz,
  author    = {Seyler, Steve and Schwarz, W.},
  title     = {MODERN PHOTOGRAMMETRY IN CIVIL ENGINEERING - EXAMPLES FOR MONITORING AND EVALUATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3019},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30192},
  pages     = {13},
  abstract  = {Monitoring und Bewertung sind Hauptaufgaben im Management bzw. der Revitalisierung von Bauwerken. Unterschiedliche Verfahren k{\"o}nnen bei der Akquisition der erforderlichen geometrischen Information, wie z. B. Gr{\"o}ße oder Verformung eines Geb{\"a}udes, eingesetzt werden. Da das Potenzial der digitalen Fotografie kontinuierlich w{\"a}chst, stellt die Industriephotogrammetrie heute eine bedeutende Alternative zu den klassischen Verfahren wie Dehnmessstreifen oder anderen taktilen Sensoren dar. Moderne Industriephotogrammetrie erfasst die Bilder mittels digitaler Systeme. Dies bedeutet, dass die Information digitaler Bilder mit Hilfe der digitalen Bildverarbeitung untersucht werden muss, um die Bildkoordinaten der Messpunkte zu erhalten. Eine der Aufgaben der Bildverarbeitung f{\"u}r photogrammetrische Zwecke besteht somit darin, den Mittelpunkt von kreisf{\"o}rmigen Marken zu lokalisieren. Die modernen Operatoren liefern Subpixelgenauigkeit f{\"u}r die Koordinaten des Punktes. Das optische Messverfahren der Industriephotogrammetrie erfordert hinsichtlich der Hardware in erster Linie hochaufl{\"o}sende digitale Kameras. Dabei lassen sich die Kameras in Videokameras, HighSpeed-Kameras, intelligente Kameras sowie so genannte Consumer und Professionelle Kameras unterscheiden. Die geometrische Aufl{\"o}sung digitaler HighEnd-Kameras liegt heute bei {\"u}ber 10 Megapixel. In punkto Datentransfer zum Rechner sind verschiedene Standards am Markt verf{\"u}gbar, z. B. USB2.0, GigE-Vision, CameraLink oder Firewire. Die Wahl des Standards h{\"a}ngt immer von der spezifischen Aufgabenstellung ab, da keine der Techniken eine f{\"u}hrende Position einnimmt. Die moderne Photogrammetrie bietet viele neue M{\"o}glichkeiten f{\"u}r das Monitoring und die Bewertung von Bauwerken. Sie kann ein-, zwei-, drei- oder vierdimensionale Informationen liefern, falls erforderlich auch in Echtzeit. Als ber{\"u}hrungsloses Messverfahren ist der Einsatz der Photogrammetrie noch m{\"o}glich, wenn die taktilen Sensoren z. B. aufgrund ihres Platzbedarfes nicht mehr eingesetzt werden k{\"o}nnen. Hochaufl{\"o}sende Videokameras erlauben es, selbst dynamische Untersuchungen mit großer Pr{\"a}zision durchzuf{\"u}hren.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SeidelGasserWerner,
  author    = {Seidel, Tilman and Gasser, Ingenuin and Werner, Bodo},
  title     = {CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3018},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30187},
  pages     = {8},
  abstract  = {Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchoenbergerHermann,
  author    = {Sch{\"o}nberger, Karsten and Hermann, F.},
  title     = {COMPUTERGEST{\"U}TZTES PORTFOLIOMANAGEMENT - EIN PRAXISBEISPIEL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3016},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30168},
  pages     = {10},
  abstract  = {Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das gr{\"o}ßte Wohnungsunternehmen in Th{\"u}ringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerst{\"a}nde und unterschiedliche Modernisierungsmaßnahmen und -st{\"a}nde unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivit{\"a}t, die Standortqualit{\"a}t und die Objektwirtschaftlichkeit f{\"a}llt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. {\"U}ber die Schritte der technischen Bestandserfassung, die Einwertung {\"u}ber ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugeh{\"o}riger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-j{\"a}hrigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchleinkoferSchaefervanTreecketal.,
  author    = {Schleinkofer, Matthias and Sch{\"a}fer, T. and van Treeck, Christoph and Rank, Ernst},
  title     = {VOM LASERSCAN ZUM PLANUNGSTAUGLICHEN PRODUKTMODELL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3015},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30159},
  pages     = {18},
  abstract  = {Im Bereich der Altbausanierung und der Bestandserfassung im Bauwesen ist es h{\"a}ufig notwendig, bestehende Pl{\"a}ne hinsichtlich des Bauwerkszustandes zu aktualisieren oder, wenn diese Pl{\"a}ne nicht (mehr) zug{\"a}nglich sind, g{\"a}nzlich neue Planunterlagen des Ist-Zustandes zu erstellen. Ein komfortabler Weg, diese Bauwerksdaten zu erheben, er{\"o}ffnet die Technologie der Laservermessung. Der vorliegende Artikel stellt in diesem Zusammenhang Ans{\"a}tze zur Teilautomatisierung der Generierung eines dreidimensionalen Computermodells eines Bauwerkes vor. Als Ergebnis wird ein Volumenmodell bereitgestellt, in dem zun{\"a}chst die geometrischen und topologischen Informationen {\"u}ber Fl{\"a}chen, Kanten und Punkte im Sinne eines B-rep Modells beschrieben sind. Die Objekte dieses Volumenmodells werden mit Verfahren aus dem Bereich der k{\"u}nstlichen Intelligenz analysiert und in Bauteilklassen systematisch kategorisiert. Die Kenntnis der Bauteilsemantik erlaubt es somit, aus den Daten ein Bauwerks-Produktmodell abzuleiten und dieses einzelnen Fachplanern - etwa zur Erstellung eines Energiepasses - zug{\"a}nglich zu machen. Der Aufsatz zeigt den erfolgreichen Einsatz virtueller neuronaler Netze im Bereich der Bestandserfassung anhand eines komplexen Beispiels.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Schiller,
  author    = {Schiller, Christian},
  title     = {CONSTRAINED TRAFFIC DEMAND MODELS - SIMULTANEOUS DISTRIBUTION AND MODE CHOICE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3014},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30148},
  pages     = {16},
  abstract  = {Unconstrained models are very often found in the broad spectrum of different theories of traffic demand models. In these models there are none or only one-sided restrictions influencing the choice of the individual. However in the traffic demand different deciding dependencies of the traffic volume with regard to the specific conditions of the territory structure potentials exist. Kichhoff and Lohse introduced bi- and tri-linearly constrained models to show these dependencies. In principle, the dependencies are described as hard, elastic and open boundary sum criteria. In this article a model is formulated which gets away from these predefined boundary sum criteria and allows a free determination of minimal and maximal boundary sum criteria. The iterative solution algorithm is shown according to a FURNESS procedure at the same time. With the approach of freely selectable minimal and maximal boundary sum criteria the modeling transport planner gets the possibility to show the traffic event even better. Furthermore all common boundary sum criteria can be calculated with this model. Therewith the often necessary and sensible standard and special cases can also be modeled.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {INTEGRIERTE SYSTEMBEDIENUNG IN GEB{\"A}UDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3013},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30132},
  pages     = {7},
  abstract  = {R{\"a}ume und Geb{\"a}ude sind heute wegen der enormen Funktionalit{\"a}t der technischen Geb{\"a}udeausr{\"u}stung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl f{\"u}r Wohn- als auch f{\"u}r Zweckimmobilien. Die Geb{\"a}udeleittechnik (GLT) und die Geb{\"a}udeautomation (GA) k{\"o}nnen hier unter sinnvoller Integration der M{\"o}glichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsb{\"u}ndelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Geb{\"a}udeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Ger{\"a}ten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil v{\"o}llig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausr{\"u}stungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundz{\"u}ge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterf{\"u}hrende Aktivit{\"a}ten.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ F{\"U}R FACILITY MANAGEMENT UND ANWENDUNG},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2914},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29140},
  pages     = {9},
  abstract  = {Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsf{\"a}higkeit in kleinsten Formaten, mit geringsten Energien und zu g{\"u}nstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Ger{\"a}ten und Systemen ist nunmehr zur Selbstverst{\"a}ndlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir n{\"a}hern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der {\"u}berall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen t{\"a}glichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die gr{\"o}ßeren Computerkomponenten (z.B. PCs, Server) {\"u}ber Datenschnittstellen zu r{\"a}umlich verteilten Netzwerken verkn{\"u}pft (z.B. Internet, Intranet) und mit einer system{\"u}bergreifenden und ad{\"a}quaten Intelligenz (Software) programmiert, so k{\"o}nnen neuartige Funktionalit{\"a}ten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Geb{\"a}uden und R{\"a}umen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Geb{\"a}udephysik, technischer Geb{\"a}udeausr{\"u}stung (TGA) und Geb{\"a}udeautomation (GA) im Wege stehende Gewerketrennung zu {\"u}berwinden. Es entstehen f{\"u}r div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erl{\"a}uterte Beispiele f{\"u}r AmI-L{\"o}sungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notf{\"a}llen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im B{\"u}ro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Geb{\"a}uden. Im Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste L{\"o}sungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen M{\"o}glichkeiten f{\"u}r den Transfer dieser neuen Technologie in den Raum- und Geb{\"a}udebereich. Es folgt eine abschließende Zusammenfaßung und eine Einsch{\"a}tzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchapkeSchererKatranuschkov,
  author    = {Schapke, Sven-Eric and Scherer, Raimar J. and Katranuschkov, Peter},
  title     = {SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3012},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30125},
  pages     = {10},
  abstract  = {In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchanzWuttkeDineva,
  author    = {Schanz, Tom and Wuttke, Frank and Dineva, Petia},
  title     = {HYBRID APPROACH OF WAVE NUMBER INTEGRATION-BOUNDARY INTEGRAL EQUATION METHOD FOR SITE EFFECT ESTIMATION OF A LATERALLY VARYING SEISMIC REGION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2913},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29132},
  pages     = {15},
  abstract  = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content Θ and suction Ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable Θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of Θ for any position along the column and (b) give the functional form for the scanning curves.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@techreport{Schaber2006,
  author    = {Schaber, Carsten},
  title     = {Strategic Developments},
  series = {Yearbook of Model Projects 2005 / 2006},
  journal   = {Yearbook of Model Projects 2005 / 2006},
  doi       = {10.25643/bauhaus-universitaet.820},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8207},
  year      = {2006},
  abstract  = {The report is about the role of Regional Development Agencies (RDAs)in England. These were founded in 1999. At first their concept, aims and orgins are addressed. Secondly the work of such an agency is explained exemplary by introducing the monitoring report Strategic Developments.},
  subject      = {Landesentwicklungsgesellschaft},
  language  = {en}
}
@misc{Schaber,
  type      = {Master Thesis},
  author    = {Schaber, Carsten},
  title     = {Space Syntax als Werkzeug zur Analyse des Stadtraums und menschlicher Fortbewegung unter besonderer Ber{\"u}cksichtigung schienengebundener Verkehrssysteme},
  doi       = {10.25643/bauhaus-universitaet.2112},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140204-21129},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {109},
  abstract  = {F{\"u}r das st{\"a}dtische Leben hat die Existenz sich ver{\"a}ndernder Personenstr{\"o}me eine grundlegende Bedeutung. Ein Werkzeug, das solche kollektiven Bewegungsmuster sichtbar machen kann, w{\"a}re dabei ein bedeutendes Hilfsmittel f{\"u}r die Stadtplanung. Im Mittelpunkt der vorliegenden Arbeit steht die Auseinandersetzung mit der Space Syntax Methode. Diese untersucht den Zusammenhang r{\"a}umlicher Strukturen mit deren Nutzung. Eine wichtige Erkenntnis ist, dass das kollektive menschliche Verhalten im {\"o}ffentlichen Raum berechenbar ist. Die Tatsache, dass Passanten bestimmte Wege bevorzugen und andere meiden, f{\"u}hrt Space Syntax dabei auf stadtr{\"a}umliche Ursachen zur{\"u}ck. Der Begriff des Natural Movement beschreibt den Anteil dieser r{\"a}umlich bedingten Nutzung. Die vorliegende Arbeit gliedert sich in einen theoretischen und einen praktischen Teil. Zun{\"a}chst werden die f{\"u}r das Verst{\"a}ndnis der Space Syntax Methode wichtigen Begriffe und Maßgr{\"o}ßen beschrieben. Der methodische Teil wird erg{\"a}nzt durch eine Gegen{\"u}berstellung nutzer-basierter wissenschaftlicher Ans{\"a}tze mit der r{\"a}umlich-orientierten Space Syntax Methode. Im zweiten Teil der Arbeit wird die praktische Anwendung der Space Syntax Methode am Beispiel des Leipziger City-Tunnels vorgenommen. Das Fallbeispiel ist pr{\"a}destiniert f{\"u}r die Untersuchung, wie die regionale Vernetzung des Schienenverkehrs aktuell betrieben wird. Von Interesse ist dabei sowohl die Konzeption des zuk{\"u}nftigen Liniennetzes als auch dessen stadtr{\"a}umliche Einbindung.},
  subject      = {Urbanistik},
  language  = {de}
}
@inproceedings{SampaioHenriquesStuderetal.,
  author    = {Sampaio, Alcinia Zita and Henriques, Pedro and Studer, P. and Luizi, Rui},
  title     = {VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30090},
  pages     = {9},
  abstract  = {The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{RueppelMeissnerLange,
  author    = {R{\"u}ppel, Uwe and Meißner, Udo F. and Lange, Michael},
  title     = {KOOPERATIVE BRANDSCHUTZPLANUNG MIT SOFTWARE-AGENTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3007},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30071},
  pages     = {10},
  abstract  = {Die effektive Kooperation aller beteiligten Fachplaner im Bauplanungsprozess ist die Voraussetzung f{\"u}r wirtschaftliches und qualitativ hochwertiges Bauen. Bauprojektorganisationen bestehen in der Regel aus zahlreichen unabh{\"a}ngigen Planungspartnern, die {\"o}rtlich verteilt spezifische Planungsaufgaben bearbeiten und die Ergebnisse in Teilproduktmodellen ablegen. Da Planungsprozesse im Bauwesen stark arbeitsteilig ablaufen, sind die Teilproduktmodelle der einzelnen Fachplanungen in hohem Maße voneinander abh{\"a}ngig. Ziel des hier vorgestellten Ansatzes ist die Integration der Teilproduktmodelle der Geb{\"a}udeplanung in einem netzwerkbasierten Modellverbund am Beispiel der Brandschutzplanung. Im Beitrag werden die Probleme der Verteiltheit und insbesondere der semantischen Heterogenit{\"a}t der involvierten Teilproduktmodelle betrachtet. Der verteilte Zugriff wird mithilfe mobiler Software-Agenten realisiert. Die Agenten k{\"o}nnen sich dabei frei im netzwerkbasierten Planungsverbund bewegen und agieren als Vertreter der Fachplaner. Das Problem der semantischen Heterogenit{\"a}t der Teilproduktmodelle wird auf der Basis von Ontologien gel{\"o}st. Dazu werden erstens Dom{\"a}nenontologien entwickelt, die Objekte der realen Welt einer abgeschlossenen Dom{\"a}ne, hier des Brandschutzes, abbilden. Zweitens werden Applikationsontologien entwickelt, die die einzelnen propriet{\"a}ren Datenhaltungen (im Sinne von Teilproduktmodellen) der jeweiligen Fachplanungen repr{\"a}sentieren. Beide Ontologien werden mit einem regelbasierten Ansatz verkn{\"u}pft. Im vorgestellten Anwendungsfall Brandschutz dient die Dom{\"a}nenontologie als einheitliche Schnittstelle f{\"u}r den Zugriff auf die verteilten Modelle und abstrahiert dabei von deren Datenbankspezifika und propriet{\"a}ren Schemata. Mithilfe von mobilen Agenten und semantischen Technologien kann so eine Plattform zur Verf{\"u}gung gestellt werden, die erstens die dynamische Integration von Ressourcen in den Planungsverbund erlaubt und zweitens auf deren Basis unabh{\"a}ngig von der Verteiltheit und Heterogenit{\"a}t der eingebundenen Ressourcen ingenieurgerechte Verarbeitungsmethoden realisiert werden k{\"o}nnen.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@phdthesis{Roessler2006,
  author    = {R{\"o}ßler, Christiane},
  title     = {Hydratation, Fließf{\"a}higkeit und Festigkeitsentwicklung von Portlandzement - Einfluss von Fließmitteln, Alkalisulfaten und des Abbindereglers},
  doi       = {10.25643/bauhaus-universitaet.799},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070206-8425},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Eine zielf{\"u}hrende Anwendung von Zusatzmitteln bei der Ausf{\"u}hrung anspruchsvoller Betonbauten setzt einen hohen Kenntnisstand bez{\"u}glich der Wirkungsmechanismen und Interaktionen der einzelnen Betonkomponenten voraus. In der vorliegenden Arbeit wurden einige Aspekte der Zementhydratation in Abh{\"a}ngigkeit von der Fließmittelzugabe diskutiert. Im Ergebnis liefern die Teile eins und zwei der vorliegenden Arbeit einen Beitrag dazu, Ver{\"a}nderungen der Fließf{\"a}higkeit von Zementleim in Abh{\"a}ngigkeit der Zementhydratation und Fließmittelzugabe besser zu verstehen. Es konnte so z.B. gezeigt werden, dass Bildung langprismatischer Kristalle (z.B. Syngenit, Gips) die Fließf{\"a}higkeit von Zementleim und Beton vermindert. Infolge anhaltender Scherung von Zementleimen / Betonen mit langprismatischen Kristallen wird ein Zuwachs an Fließf{\"a}higkeit erzielt. Elektronenmikroskopische Untersuchungen zeigen, dass dies darauf zur{\"u}ckzuf{\"u}hren ist, dass die Kristalle in eine Vorzugsorientierung relativ zur Scherbewegung rotieren. Weiterhin wurde der Mechanismus einer so genannten Zement-Fließmittel-Inkompatibilit{\"a}t aufgezeigt. Durch diese Erweiterung des Kenntnisstandes zum Einfluss von Fließmitteln auf die Zementhydratation ist es m{\"o}glich der Zement-Fließmittel-Inkompatibilit{\"a}t durch gezielte Auswahl des Zementes vorzubeugen. Dabei ist besonders darauf zu achten, dass der Zement ein ausgewogenes Verh{\"a}ltnis an zur Reaktion zur Verf{\"u}gung stehendem C3A und Menge / L{\"o}slichkeit des Abbindereglers besitzt. Fließmittel ver{\"a}ndern nicht nur die Verarbeitungseigenschaften sondern auch die Festigkeit und Dauerhaftigkeit von Zementstein und Beton. Im dritten Teil der vorliegenden Arbeit wird daher der Einfluss der Fließmittel und deren verfl{\"u}ssigender Wirkung auf die Festigkeitsentwicklung von Zementstein und C3S untersucht. Es konnte gezeigt werden, dass durch die dispergierende Wirkung der Fließmittel auch ohne Verminderung des Wasserzementwertes, eine Verdichtung des Zementsteingef{\"u}ges erzielt werden kann. Es konnte weiterhin gezeigt werden, dass durch die Erh{\"o}hung der Partikelpackungsdichte am Anfang der Hydratation die Ausbildung der festigkeitsgebenden C-S-H Phasen ver{\"a}ndert wird. Ein dichteres Verwachsen dieser nanostrukturierten C-S-H Phasen erm{\"o}glicht einen zus{\"a}tzlichen Festigkeitszuwachs.},
  subject      = {Zement},
  language  = {de}
}
@inproceedings{RyanKrausshar,
  author    = {Ryan, John and Kraußhar, Rolf S{\"o}ren},
  title     = {ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3008},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30081},
  pages     = {5},
  abstract  = {In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Rohr,
  author    = {Rohr, Stefan},
  title     = {NEUE M{\"O}GLICHKEITEN IN DER ABLAUFPLANUNG DURCH DIE EREIGNISORIENTIERTE SIMULATION VON PRODUKTIONSPROZESSEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3006},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30060},
  pages     = {63},
  abstract  = {Durch die Betrachtung des Produktions-Prozesses als zentrales Transformationselement wird die Struktur der Bauproduktion realit{\"a}tsnah gefasst. Die Integration der prozessorientierten Kostendefinition setzt relevante Kostenparameter und Produktionsfaktoren so in Beziehung, dass sie im Einklang mit der realen Kostenstruktur und Kostendynamik einer Baustelle stehen. Die Beziehung zwischen Bauzeit und Kosten wird direkt erfasst und ausgewertet. Der hohen Dynamik der Bauproduktion zwischen kapazit{\"a}tsbeschr{\"a}nkten Einsatzmitteln und Produktionsprozessen wurde durch das Poolmodell und der Simulation als Berechnungsmethode Rechnung getragen. Eine einfache Modellierung von sich zyklusartig wiederholenden Arbeitsvorg{\"a}ngen (Taktplanung) ist m{\"o}glich. Die Taktbildung vollzieht sich bei der Simulation durch Kapazit{\"a}tsbeschr{\"a}nkungen ohne Zutun des Benutzers. Durch eine Optimierungsmethode kann automatisiert nach der kosteng{\"u}nstigsten oder zeitlich schnellsten Produktionsvariante gesucht werden},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{RogożaStachonUbysz,
  author    = {Rogoża, Agnieszka and Stachon, T. and Ubysz, Andrzej},
  title     = {MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3005},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30050},
  pages     = {6},
  abstract  = {The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{RichterDonath,
  author    = {Richter, Katharina and Donath, Dirk},
  title     = {AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3004},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30047},
  pages     = {5},
  abstract  = {This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}