@phdthesis{Bockelmann, author = {Bockelmann, Leo}, title = {Zeit, dass sich was dreht. Windenergieanlagen aus denkmalkundlicher Perspektive}, doi = {10.25643/bauhaus-universitaet.4543}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211210-45439}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {233}, abstract = {Knapp 30.000 Windenergieanlagen zwischen Nordsee und Alpen lassen un{\"u}bersehbar erkennen, dass sich unser Energiesystem in einer umfassenden Transformation befindet. Allenthalben erf{\"a}hrt diese Entwicklung eine breite und kontroverse Rezeption und auch in der Denkmalpflege werden Windenergieanlagen aufgrund ihrer mitunter erheblichen Auswirkungen auf die Landschaft noch {\"u}berwiegend als St{\"o}rung wahrgenommen. Diese Arbeit nimmt dagegen die historische Entwicklung in den Blick und pl{\"a}diert daf{\"u}r, Windenergieanlagen als bedeutendes Kulturerbe zu verstehen. Angesichts des Voranschreitens der Energiewende wird angenommen, dass gerade {\"a}lteren Modellen als baulichen Zeugnissen umfangreicher energiepolitischer Ver{\"a}nderungen seit den 1970er Jahren eine hohe Bedeutung zugeschrieben werden kann. Daher besteht das Ziel darin, Windenergieanlagen herauszuarbeiten, welche als hervorragende Zeugnisse der Entwicklung der Windenergienutzung in Deutschland zu bewerten sind. Zur Ann{\"a}herung werden diese zun{\"a}chst als Untersuchungsgegenstand typologisch abgegrenzt. Eine wesentliche Besonderheit von Windenergieanlagen besteht darin, dass sie im Verh{\"a}ltnis zur eigentlichen Fl{\"a}chenversiegelung durch ihre vertikale Struktur erhebliche visuelle Auswirkungen auf die Landschaft haben. Anschließend wird die Entwicklung der Windenergienutzung seit den 1970er Jahren genauer betrachtet, welche insgesamt nicht linear verlief und von vielen Konflikten gekennzeichnet ist. Diese muss im Kontext eines wachsenden Umweltbewusstseins verstanden werden, das umfangreiche energiepolitische Ver{\"a}nderungen zur Folge hatte. Auf dieser Grundlage werden schließlich in einer denkmalkundlichen Reihenuntersuchung Windenergieanlagen herausgearbeitet, welche in hervorragender Weise von der Entwicklung zeugen. Die Auswahl bleibt allerdings mit sechs Objekten im Verh{\"a}ltnis zum Gesamtbestand von knapp 30.000 Anlagen relativ beschr{\"a}nkt, weil das auf die Abgrenzung von Besonderheiten ausgelegte etablierte Denkmalverst{\"a}ndnis bei einem zeitlich so dichten Bestand gleichartiger Bauwerke an eine Grenze kommt. Abschließend werden m{\"o}gliche Erhaltungsperspektiven sowie denkmaltheoretische und -praktische Schlussfolgerungen diskutiert. Dabei ist unbedingt ein Erhalt am Ursprungsstandort anzustreben, wobei im Einzelfall entschieden werden muss, ob Belange des Funktions- oder Substanzerhaltes h{\"o}her zu gewichten sind. Die skizzierten Auswahlprobleme regen dar{\"u}ber hinaus zur Diskussion zus{\"a}tzlicher denkbarer Bewertungskategorien an, wobei sich insbesondere die gesellschaftliche Wahrnehmung und {\"o}kologische Werte aufdr{\"a}ngen. Zudem kann f{\"u}r die st{\"a}rkere Ber{\"u}cksichtigung von Funktionszusammenh{\"a}ngen bei der Betrachtung technischer Infrastruktur in der Denkmalpflege pl{\"a}diert werden. Insgesamt f{\"u}hrt die denkmalkundliche Auseinandersetzung mit Windenergieanlagen damit weit {\"u}ber die Herausarbeitung einzelner Objekte hinaus und macht eindr{\"u}cklich auf aktuelle Herausforderungen der Denkmalpflege und dar{\"u}ber hinaus aufmerksam.}, subject = {Industriekultur}, language = {de} } @article{JiangRoesslerWellmannetal., author = {Jiang, Mingze and R{\"o}ßler, Christiane and Wellmann, Eva and Klaver, Jop and Kleiner, Florian and Schmatz, Joyce}, title = {Workflow for high-resolution phase segmentation of cement clinker fromcombined BSE image and EDX spectral data}, series = {Journal of Microscopy}, volume = {2021}, journal = {Journal of Microscopy}, publisher = {Wiley-Blackwell}, address = {Oxford}, doi = {10.1111/jmi.13072}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211215-45449}, pages = {1 -- 7}, abstract = {Burning of clinker is the most influencing step of cement quality during the production process. Appropriate characterisation for quality control and decision-making is therefore the critical point to maintain a stable production but also for the development of alternative cements. Scanning electron microscopy (SEM) in combination with energy dispersive X-ray spectroscopy (EDX) delivers spatially resolved phase and chemical information for cement clinker. This data can be used to quantify phase fractions and chemical composition of identified phases. The contribution aims to provide an overview of phase fraction quantification by semi-automatic phase segmentation using high-resolution backscattered electron (BSE) images and lower-resolved EDX element maps. Therefore, a tool for image analysis was developed that uses state-of-the-art algorithms for pixel-wise image segmentation and labelling in combination with a decision tree that allows searching for specific clinker phases. Results show that this tool can be applied to segment sub-micron scale clinker phases and to get a quantification of all phase fractions. In addition, statistical evaluation of the data is implemented within the tool to reveal whether the imaged area is representative for all clinker phases.}, subject = {Zementklinker}, language = {en} } @phdthesis{Potocka, author = {Potocka, Anna}, title = {Wearables: Kontrollregime zwischen Affekt und Technologie}, doi = {10.25643/bauhaus-universitaet.4459}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210713-44594}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {164}, abstract = {{\"U}berwachungspraktiken und -technologien sind in der heutigen Welt omnipr{\"a}sent und wohl nicht mehr wegzudenken. Ob CCTV-Systeme, Biometrie oder Data Mining - unsere Gesellschaft befindet sich in einem st{\"a}ndigen {\"U}berwachungsmodus, der sich weit {\"u}ber einen begrenzten Raum oder zeitlichen Rahmen hinausstreckt. {\"U}berwacht wird {\"u}berall: privat, am Arbeitsplatz oder im Cyberspace, und alles: Interaktionen, {\"A}ußerungen, Verhalten. Es werden Unmengen von Daten gesammelt, strukturiert, kombiniert, gekauft und verkauft. Dieser Modus stellt mehr als eine bloße Neuauflage des Bentham-Foucaultschen Panoptikons dar: der aktuelle {\"U}berwachungsmodus, die informationelle Asymmetrie als ihren tragenden Pfeiler beibehaltend, dient nicht nur der Disziplinierung, sondern viel mehr der Kontrolle, die nicht prim{\"a}r negativ-sanktionierend, sondern positiv-leistungssteigernd wirkt: es ist nicht das Ziel, die Individuen zu bestrafen und ein bestimmtes Verhalten zu verbieten, sondern sie durch Belohnung, Interaktion und spielerische Elemente dazu zu bringen, sich auf die gew{\"u}nschte Art zu verhalten und im Endeffekt sich selbst zu {\"u}berwachen. Die Kontrolle wird auf diese Weise zum zentralen Schauplatz der Machtaus{\"u}bung, die sich {\"u}ber das Beobachten, Speichern, Auswerten und Sortieren vollzieht. Diese Prozesse hinterlassen keinen Frei- oder Spielraum f{\"u}r Ambiguit{\"a}t; sie verwirklichen die Diktatur der klaren Kante, der Klassifizierung und Kategorisierung ohne Schattierungen. Die Macht selbst befindet sich in einem kontinuierlichen Fluss, sie ist ubiquit{\"a}r, dennoch schwer lokalisierbar. Sie fungiert nicht mehr unter dem Signum einer pseudosakralen zentralen Instanz, sondern wird durch diverse Akteure und Assemblages kolportiert. Die durch sie implizierten Praktiken der Selbstkontrolle, kulturgeschichtlich ebenfalls religi{\"o}s oder zumindest philosophisch konnotiert, sind die neuen Rituale des Sehens und Gesehen-Werdens. Im Zeitalter der elektronischen Datentechnologien gibt es diverse Agenten der {\"U}berwachung. Vom besonderen Interesse sind dabei die Wearables, weil sie intim, affektiv und haptisch arbeiten und so, {\"u}ber das Sehen und Gesehen-Werden hinaus, das Ber{\"u}hren und Ber{\"u}hrt-Werden und somit die Neuregulierung von N{\"a}he und Distanz ins Spiel bringen. Sie schreiben sich zwar in eine Vermessungstradition eins, die ihre Urspr{\"u}nge mindestens im 19. Jahrhundert hat, unterscheiden sich aber von dieser in ihrer Intensit{\"a}t und Sinnlichkeit.}, subject = {Technologie}, language = {de} } @article{StaubachMachacekSkowroneketal.2020, author = {Staubach, Patrick and Machacek, Jan and Skowronek, Josefine and Wichtmann, Torsten}, title = {Vibratory pile driving in water-saturated sand: Back-analysis of model tests using a hydro-mechanically coupled CEL method}, series = {Soils and Foundations}, volume = {2021}, journal = {Soils and Foundations}, number = {Volume 61, Issue 1}, publisher = {Elsevier, Science Direct}, address = {Amsterdam}, doi = {10.1016/j.sandf.2020.11.005}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210203-43571}, pages = {144 -- 159}, year = {2020}, abstract = {The development of a hydro-mechanically coupled Coupled-Eulerian-Lagrangian (CEL) method and its application to the back-analysisof vibratory pile driving model tests in water-saturated sand is presented. The predicted pile penetration using this approachis in good agreement with the results of the model tests as well as with fully Lagrangian simulations. In terms of pore water pressure, however, the results of the CEL simulation show a slightly worse accordance with the model tests compared to the Lagrangian simulation. Some shortcomings of the hydro-mechanically coupled CEL method in case of frictional contact problems and pore fluids with high bulk modulus are discussed. Lastly, the CEL method is applied to the simulation of vibratory driving of open-profile piles under partially drained conditions to study installation-induced changes in the soil state. It is concluded that the proposed method is capable of realistically reproducing the most important mechanisms in the soil during the driving process despite its addressed shortcomings.}, subject = {Plastische Deformation}, language = {en} } @phdthesis{Alkam, author = {Alkam, Feras}, title = {Vibration-based Monitoring of Concrete Catenary Poles using Bayesian Inference}, volume = {2021}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4433}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210526-44338}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {177}, abstract = {This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level.}, subject = {Parameteridentifikation}, language = {en} } @misc{Baron, author = {Baron, Nicole}, title = {Verflechtungen im st{\"a}dtischen Gef{\"u}ge. Rezension zu Barbara Heer (2019): Cities of entanglements. Social life in Johannesburg and Maputo through ethnographic comparison}, series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, volume = {2021}, journal = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, number = {Band 9, Heft 1/2}, publisher = {sub\urban e. V.}, address = {Berlin}, doi = {10.36900/suburban.v9i1/2.664}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44785}, pages = {235 -- 240}, abstract = {Dieser Artikel rezensiert die {\"u}berarbeitete Version von Barbara Heers Dissertation zu st{\"a}dtischen Verflechtungen in Johannesburg und Maputo. Das Buch ist 2019 im Transcript Verlag erschienen und umfasst 337 Seiten.}, subject = {S{\"u}dafrika}, language = {de} } @inproceedings{KleinerRoessler, author = {Kleiner, Florian and R{\"o}ßler, Christiane}, title = {Utilizing Modern FIB/SEM Technology and EDS for 3D Imaging of Hydrated Alite and its Pore Space}, series = {ERICA-CASH II Final Converence}, booktitle = {ERICA-CASH II Final Converence}, doi = {10.25643/bauhaus-universitaet.4455}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210702-44555}, pages = {2}, abstract = {The exploration of cementitious materials using scanning electron microscopes (SEM) is mainly done using fractured or polished surfaces. This leads to high-resolution 2D-images that can be combined using EDX and EBSD to unveil details of the microstructure and composition of materials. Nevertheless, this does not provide a quantitative insight into the three-dimensional fine structure of for example C-S-H phases. The focused ion beam (FIB) technology can cut a block of material in thin layers of less than 10 nm. This gives us a volume of 1000 μm³ with a voxel resolution of down to 4 x 4 x 10 nm³. The results can be combined with simultaneously acquired EDX data to improve image segmentation. Results of the investigation demonstrate that it is possible to obtain close-to-native 3D-visualisation of the spatial distribution of unreacted C3S, C-S-H and CH. Additionally, an optimized preparation method allows us to quantify the fine structure of C-S-H phases (length, aspect ratio, …) and the pore space.}, subject = {Rasterelektronenmikroskop}, language = {en} } @phdthesis{Reshetnikova, author = {Reshetnikova, Tatiana}, title = {Transformation of the Environment: Influence of "Urban Reagents." German and Russian Case Studies}, doi = {10.25643/bauhaus-universitaet.4351}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210128-43517}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {256 (thesis) + 23 (Folder) + 83 (CD)}, abstract = {An urban regeneration manifests itself through urban objects operating as change agents. The en-tailed diverse effects on the surroundings demonstrate experimental origin - an experiment as a preplanned but unpredictable method. An understanding of influences and features of urban ob-jects requires scrutiny due to a high potential of the elements to force an alteration and reactions. This dissertation explores the transformation of the milieu and mechanisms of this transformation.}, subject = {Stadtentwicklung}, language = {en} } @article{BecherGenaAlsaadetal., author = {Becher, Lia and Gena, Amayu Wakoya and Alsaad, Hayder and Richter, Bernhard and Spahn, Claudia and V{\"o}lker, Conrad}, title = {The spread of breathing air from wind instruments and singers using schlieren techniques}, series = {Indoor Air}, volume = {2021}, journal = {Indoor Air}, number = {volume 31, issue 6}, publisher = {Wiley Blackwell}, address = {Oxford}, doi = {10.1111/ina.12869}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220209-45817}, pages = {1798 -- 1814}, abstract = {The spread of breathing air when playing wind instruments and singing was investigated and visualized using two methods: (1) schlieren imaging with a schlieren mirror and (2) background-oriented schlieren (BOS). These methods visualize airflow by visualizing density gradients in transparent media. The playing of professional woodwind and brass instrument players, as well as professional classical trained singers were investigated to estimate the spread distances of the breathing air. For a better comparison and consistent measurement series, a single high note, a single low note, and an extract of a musical piece were investigated. Additionally, anemometry was used to determine the velocity of the spreading breathing air and the extent to which it was quantifiable. The results showed that the ejected airflow from the examined instruments and singers did not exceed a spreading range of 1.2 m into the room. However, differences in the various instruments have to be considered to assess properly the spread of the breathing air. The findings discussed below help to estimate the risk of cross-infection for wind instrument players and singers and to develop efficacious safety precautions, which is essential during critical health periods such as the current COVID-19 pandemic.}, subject = {Covid-19}, language = {en} } @phdthesis{Foka, author = {Foka, Zinovia}, title = {The Space In-Between. Tracing Transformative Processes in Nicosia's Buffer Zone.}, doi = {10.25643/bauhaus-universitaet.4444}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210531-44447}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {266}, abstract = {This thesis examines urban partition in Nicosia, the capital of Cyprus, and how its changing roles and shifting perceptions in a post-conflict setting reflect power relations, and their constant renegotiation. Nicosia, the capital of Cyprus, was officially divided in 1974 in the aftermath of an eighteen-year-long conflict between the island's Turkish- and Greek-Cypriot communities. As a result, a heavily militarized Buffer Zone, established as an emergency measure against perpetuation of intercommunal violence, has been cutting through its historic centre ever since. This thesis departs from a genuine interest in the material and ideational dimensions of urban partition. How is it constructed, not merely in physical terms but in the minds of the societies affected by conflict? How is it established in official and everyday discourses? What kinds of mechanisms have been developed to maintain it, and make an inseparable part of the urban experience? Moreover, taking into account the consensus in relevant literature pertaining to the imperative for its removal, this thesis is inquiring into the relevance of peace agreements to overcoming urban partition. For this purpose, it also looks at narratives and practices that have attempted to contest it. The examples examined in this thesis offer pregnant analytical moments to understand Nicosia's Buffer Zone as a dynamic social construct, accommodating multiple visions of and for the city. Its space 'in-between' facilitates encounters between various actors, accommodates new meanings, socio-spatial practices and diverse imaginaries. In this sense, urban partition is explored in this thesis as a phenomenon that transcends scales as well as temporalities, entwining past, present, and future.}, subject = {Stadtforschung}, language = {en} } @article{EhlersGrimmerStracketal., author = {Ehlers, Jan and Grimmer, Janine and Strack, Veronika and Huckauf, Anke}, title = {The influence of sham feedback on physiological processing during fear-driven stimulation}, series = {PLOS ONE}, journal = {PLOS ONE}, number = {Volume 16, issue 5, article e0251211}, publisher = {PLOS}, address = {San Francisco, Calif.}, doi = {10.1371/journal.pone.0251211}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210510-44249}, pages = {1 -- 17}, abstract = {Biofeedback constitutes a well-established, non-invasive method to voluntary interfere in emotional processing by means of cognitive strategies. However, treatment durations exhibit strong inter-individual variations and first successes can often be achieved only after a large number of sessions. Sham feedback constitutes a rather untapped approach by providing feedback that does not correspond to the participant's actual state. The current study aims to gain insights into mechanisms of sham feedback processing in order to support new techniques in biofeedback therapy. We carried out two experiments and applied different types of sham feedback on skin conductance responses and pupil size changes during affective processing. Results indicate that standardized but context-sensitive sham signals based on skin conductance responses exert a stronger influence on emotional regulation compared to individual sham feedback from ongoing pupil dynamics. Also, sham feedback should forego unnatural signal behavior to avoid irritation and skepticism among participants. Altogether, a reasonable combination of stimulus features and sham feedback characteristics enables to considerably reduce the actual bodily responsiveness already within a single session.}, subject = {Biofeedback}, language = {en} } @article{AlsaadHartmannVoelker, author = {Alsaad, Hayder and Hartmann, Maria and Voelker, Conrad}, title = {The effect of a living wall system designated for greywater treatment on the hygrothermal performance of the facade}, series = {Energy and Buildings}, volume = {2022}, journal = {Energy and Buildings}, number = {volume 255, article 111711}, doi = {10.1016/j.enbuild.2021.111711}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240116-65299}, pages = {17}, abstract = {Besides their multiple known benefits regarding urban microclimate, living walls can be used as decentralized stand-alone systems to treat greywater locally at the buildings. While this offers numerous environmental advantages, it can have a considerable impact on the hygrothermal performance of the facade as such systems involve bringing large quantities of water onto the facade. As it is difficult to represent complex entities such as plants in the typical simulation tools used for heat and moisture transport, this study suggests a new approach to tackle this challenge by coupling two tools: ENVI-Met and Delphin. ENVI-Met was used to simulate the impact of the plants to determine the local environmental parameters at the living wall. Delphin, on the other hand, was used to conduct the hygrothermal simulations using the local parameters calculated by ENVI-Met. Four wall constructions were investigated in this study: an uninsulated brick wall, a precast concrete plate, a sandy limestone wall, and a double-shell wall. The results showed that the living wall improved the U-value, the exterior surface temperature, and the heat flux through the wall. Moreover, the living wall did not increase the risk of moisture in the wall during winter and eliminated the risk of condensation.}, subject = {Feuchteleitung}, language = {en} } @techreport{VollmerCalbetiEliasRaabetal., type = {Working Paper}, author = {Vollmer, Lisa and Calbet i Elias, Laura and Raab, Susanna and Aya, Kleine and Zanders, Theresa}, title = {Teilhabe und Gemeinwohl - ihre Krisen im deutschen Wohlfahrtsregime. Begriffsdefinitionen und aktuelle Verortungen}, doi = {10.25643/bauhaus-universitaet.4432}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210519-44320}, pages = {32}, abstract = {Im ersten Working Paper des Forschungsprojekts „St{\"a}dtische Ko-Produktion von Teilhabe und Gemeinwohl. Aushandlungsprozesse zwischen zivilgesellschaft lichen Akteuren und kommunalen Verwaltungen" m{\"o}chten wir die von uns verwendeten zentralen Begrifflichkeiten definieren sowie einige Grundannahmen erl{\"a}utern. Im Anschluss an Definitionen der Begriff e Wohlfahrtsregime, Teilhabe, Gemeinwohl, Governance, Zivilgesellschaft und soziale Bewegungen erfolgt eine Analyse der heutigen Krise von Teilhabe, die wir als Ausgangspunkt zur Untersuchung unserer Fallstudien definieren. Das Working Paper dient sowohl der internen Selbstverst{\"a}ndigung im Projekt als auch dem Austausch mit anderen Forschenden in der F{\"o}rderlinie „Teilhabe und Gemeinwohl" des Bundesministeriums f{\"u}r Bildung und Forschung (BMBF) sowie dar{\"u}ber hinaus mit Projekten, die sich {\"a}hnlichen Themen widmen.}, subject = {Gemeinwohl}, language = {de} } @article{BuschowPosslerScheper, author = {Buschow, Christopher and Possler, Daniel and Scheper, Jule}, title = {Teaching Media Entrepreneurship: How A Start-up Simulation Can Increase Students' Knowledge and Encourage Them to Work in Entrepreneurial Contexts}, series = {Teaching Journalism and Mass Communication}, volume = {2021}, journal = {Teaching Journalism and Mass Communication}, number = {Volume 11, Nr. 1}, publisher = {Small Programs Interest Group}, doi = {10.25643/bauhaus-universitaet.4462}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210729-44628}, pages = {65 -- 69}, abstract = {Entrepreneurship and start-up activities are seen as a key response to recent upheavals in the media industry: Newly founded ventures can act as important drivers for industry transformation and renewal, pioneering new products, business models, and organizational designs (e.g. Achtenhagen, 2017; Buschow \& Laugemann, 2020). In principle, media students represent a crucial population of nascent entrepreneurs: individuals who will likely become founders of start-ups (Casero-Ripoll{\´e}s et al., 2016). However, their willingness to start a new business is generally considered to be rather low (Goyanes, 2015), and for journalism students, the idea of innovation tends to be conservative, following traditional norms and professional standards (Singer \& Broersma, 2020). In a sample of Spanish journalism students, L{\´o}pez-Meri et al. (2020) found that one of the main barriers to entrepreneurial intentions is that students feel they lack knowledge and training in entrepreneurship. In the last 10 years, a wide variety of entrepreneurship education courses have been set up in media departments of colleges and universities worldwide. These programs have been designed to sensitize and prepare communications, media and journalism students to think and act entrepreneurially (e.g. Caplan et al., 2020; Ferrier, 2013; Ferrier \& Mays, 2017; Hunter \& Nel, 2011). Entrepreneurial competencies and practices not only play a crucial role for start-ups, but, in imes of digital transformation, are increasingly sought after by legacy media companies as well (K{\"u}ng, 2015). At the Department of Journalism and Communication Research, Hanover University of Music, Drama and Media, Germany, we have been addressing these developments with the "Media Entrepreneurship" program. The course, established in 2013, aims to provide fundamental knowledge of entrepreneurship, as well as promoting students' entrepreneurial thinking and behavior. This article presents the pedagogical approach of the program and investigates learning outcomes. By outlining and evaluating the Media Entrepreneurship program, this article aims to promote good practices of entrepreneurship education in communications, media and journalism, and to reflect on the limitations of such programs.}, subject = {Medienwirtschaft}, language = {en} } @phdthesis{KhademiZahedi, author = {Khademi Zahedi, Reza}, title = {Stress Distribution in Buried Defective PE Pipes and Crack Propagation in Nanosheets}, doi = {10.25643/bauhaus-universitaet.4481}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210803-44814}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {235}, abstract = {Buried PE pipelines are the main choice for transporting hazardous hydrocarbon fluids and are used in urban gas distribution networks. Molecular dynamics (MD) simulations used to investigate material behavior at nanoscale.}, subject = {Gasleitung}, language = {en} } @book{BrokowLogaEckardt2021, author = {Brokow-Loga, Anton and Eckardt, Frank}, title = {Stadtpolitik f{\"u}r alle}, publisher = {Graswurzelrevolution}, address = {Heidelberg}, doi = {10.25643/bauhaus-universitaet.4390}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43904}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {68}, year = {2021}, abstract = {Die Corona-Krise hat die Erosion st{\"a}dtischer Solidarit{\"a}t offen zu Tage treten lassen. Dagegen bringen Anton Brokow-Loga und Frank Eckardt in dieser Schrift die praktische Utopie einer solidarischen Postwachstumsstadt „auf den Punkt". Vom Commoning {\"u}ber die Umverteilung der st{\"a}dtischen Fl{\"a}chen bis zu einer sozial-{\"o}kologischen Verkehrswende: Eine progressive Stadtpolitik f{\"u}r alle {\"u}berwindet bisheriges Schubladendenken. Sie setzt stattdessen auf heterogene Zusammenh{\"a}nge und ungew{\"o}hnliche B{\"u}ndnisse. Zu dem hier umrissenen Vorhaben geh{\"o}rt auch, eine basisdemokratisch orientierte Stadtpolitik mit dem Ziel einer umfassenden Transformation von Stadt und Gesellschaft zu verkn{\"u}pfen. Wie kann ein Blick auf die kommunale Ebene helfen, globalen Ungerechtigkeiten zu begegnen? Welchen Weg weisen munizipalistische Plattformen und Vergemeinschaftungen jenseits von Privat- oder Staatseigentum?}, subject = {Transformation}, language = {de} } @article{KrausCrişanWittor, author = {Kraus, Matthias and Cri{\c{s}}an, Nicolae-Andrei and Wittor, Bj{\"o}rn}, title = {Stability Study of Cantilever-Beams - Numerical Analysis and Analytical Calculation (LTB)}, series = {ce/papers}, volume = {2021}, journal = {ce/papers}, number = {Volume 4, issue 2-4}, publisher = {Ernst \& Sohn, a Wiley brand}, address = {Berlin}, doi = {10.1002/cepa.1539}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220112-45637}, pages = {2199 -- 2206}, abstract = {According to Eurocode, the computation of bending strength for steel cantilever beams is a straightforward process. The approach is based on an Ayrton-Perry formula adaptation of buckling curves for steel members in compression, which involves the computation of an elastic critical buckling load for considering the instability. NCCI documents offer a simplified formula to determine the critical bending moment for cantilevers beams with symmetric cross-section. Besides the NCCI recommendations, other approaches, e.g. research literature or Finite-Element-Analysis, may be employed to determine critical buckling loads. However, in certain cases they render different results. Present paper summarizes and compares the abovementioned analytical and numerical approaches for determining critical loads and it exemplarily analyses corresponding cantilever beam capacities using numerical approaches based on plastic zones theory (GMNIA).}, subject = {Tr{\"a}ger}, language = {en} } @article{MuellerLudwigTangeHasholt, author = {M{\"u}ller, Matthias and Ludwig, Horst-Michael and Tange Hasholt, Marianne}, title = {Salt frost attack on concrete: the combined effect of cryogenic suction and chloride binding on ice formation}, series = {Materials and Structures}, volume = {2021}, journal = {Materials and Structures}, number = {issue 54, article 189}, doi = {10.1617/s11527-021-01779-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211207-45392}, pages = {1 -- 16}, abstract = {Scaling of concrete due to salt frost attack is an important durability issue in moderate and cold climates. The actual damage mechanism is still not completely understood. Two recent damage theories—the glue spall theory and the cryogenic suction theory—offer plausible, but conflicting explanations for the salt frost scaling mechanism. The present study deals with the cryogenic suction theory, which assumes that freezing concrete can take up unfrozen brine from a partly frozen deicing solution during salt frost attack. According to the model hypothesis, the resulting saturation of the concrete surface layer intensifies the ice formation in this layer and causes salt frost scaling. In this study an experimental technique was developed that makes it possible to quantify to which extent brine uptake can increase ice formation in hardened cement paste (used as a model material for concrete). The experiments were carried out with low temperature differential scanning calorimetry, where specimens were subjected to freeze-thaw cycles while being in contact with NaCl brine. Results showed that the ice content in the specimens increased with subsequent freeze-thaw cycles due to the brine uptake at temperatures below 0 °C. The ability of the hardened cement paste to bind chlorides from the absorbed brine at the same time affected the freezing/melting behavior of the pore solution and the magnitude of the ice content.}, subject = {Beton}, language = {en} } @phdthesis{Arzmi, author = {Arzmi, Azmah}, title = {Reinterpreting Marzahn, Berlin \& Petržalka, Bratislava: From Process of State Socialist Utopia to Utopia of State Capitalist Process}, doi = {10.25643/bauhaus-universitaet.4392}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43927}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Housing estates were fundamentally conceived upon state socialist utopia ideas to provide standard housing for citizens. While former state socialist housing estates have been extensively researched in the field of architecture, urban and sociology studies, there is still a gap in identifying how production processes affect morphological changes during the post-socialist era. This thesis compares the processes in the production of the largest housing estates of Marzahn in GDR and Petržalka in Czechoslovakia from 1970 to 1989 through contextual analysis of primary and secondary sources, which include visual maps, diagrams from professional architecture and planning journals, government documents and textbooks, as well as academic journals, books and newspaper articles. Then it discusses how these processes inadvertently created conducive conditions affecting their development in the market economy after 1989. It then interprets the results through application of Actor-Network Theory and Historical Institutionalism, while conceptualising them through David Harvey's dialectical utopianism theory. Harvey (2000) delineates two types of utopia, one of spatial form and one of process. The former refers to materialised ideals in physical forms whereas the latter refers to the ongoing process of spatializing. The thesis aims to show how the production of Marzahn in GDR was more path dependent on policies established in 1950s and 1960s whereas Petržalka was a product of new Czechoslovakian policies in 1970s, changing aspects of the urban planning process, a manifestation of a more emphatic technocratic thinking on a wider scale. This ultimately influences the trajectories of development after 1989, showing more effects in Petržalka.}, subject = {Kulturerbe}, language = {en} } @inproceedings{Dokhanchi, author = {Dokhanchi, Najmeh Sadat}, title = {Reconstruction of the indoor air temperature distribution using acoustic travel-time tomography}, editor = {Arnold, J{\"o}rg}, doi = {10.25643/bauhaus-universitaet.4659}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220622-46593}, abstract = {Acoustic travel-time tomography (ATOM) is being increasingly considered recently as a remote sensing methodology to determine the indoor air temperatures distribution. It employs the relationship between the sound velocities along sound-paths and their related travel-times through measured room-impulse-response (RIR). Thus, the precise travel-time estimation is of critical importance which can be performed by applying an analysis time-window method. In this study, multiple analysis time-windows with different lengths are proposed to overcome the challenge of accurate detection of the travel-times at RIR. Hence, the ATOM-temperatures distribution has been measured at the climate chamber lab of the Bauhaus-University Weimar. As a benchmark, the temperatures of NTC thermistors are compared to the reconstructed temperatures derived from the ATOM technique illustrating this technique can be a reliable substitute for traditional thermal sensors. The numerical results indicate that the selection of an appropriate analysis time-window significantly enhances the accuracy of the reconstructed temperatures distribution.}, subject = {Bauphysik}, language = {en} } @article{KleinerRoesslerVogtetal., author = {Kleiner, Florian and R{\"o}ßler, Christiane and Vogt, Franziska and Osburg, Andrea and Ludwig, Horst-Michael}, title = {Reconstruction of calcium silicate hydrates using multiple 2D and 3D imaging techniques: Light microscopy, μ-CT, SEM, FIB-nT combined with EDX}, series = {Journal of Microscopy}, volume = {2021}, journal = {Journal of Microscopy}, publisher = {John Wiley \& Sons Ltd}, address = {Oxford}, doi = {10.1111/jmi.13081}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220106-45458}, pages = {1 -- 6}, abstract = {This study demonstrates the application and combination of multiple imaging techniques [light microscopy, micro-X-ray computer tomography (μ-CT), scanning electron microscopy (SEM) and focussed ion beam - nano-tomography (FIB-nT)] to the analysis of the microstructure of hydrated alite across multiple scales. However, by comparing findings with mercury intrusion porosimetry (MIP), it becomes obvious that the imaged 3D volumes and 2D images do not sufficiently overlap at certain scales to allow a continuous quantification of the pore size distribution (PSD). This can be overcome by improving the resolution and increasing the measured volume. Furthermore, results show that the fibrous morphology of calcium-silicate-hydrates (C-S-H) phases is preserved during FIB-nT. This is a requirement for characterisation of nano-scale porosity. Finally, it was proven that the combination of FIB-nT with energy-dispersive X-ray spectroscopy (EDX) data facilitates the phase segmentation of a 11 × 11 × 7.7 μm3 volume of hydrated alite.}, subject = {Zementklinker}, language = {en} } @article{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Qualitative evaluation of the flow supplied by personalized ventilation using schlieren imaging and thermography}, series = {Building and Environment}, volume = {2020}, journal = {Building and Environment}, number = {Volume 167, article 106450}, publisher = {Elsevier}, address = {New York}, doi = {10.25643/bauhaus-universitaet.4511}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211008-45117}, pages = {11}, abstract = {Personalized ventilation (PV) is a mean of delivering conditioned outdoor air into the breathing zone of the occupants. This study aims to qualitatively investigate the personalized flows using two methods of visualization: (1) schlieren imaging using a large schlieren mirror and (2) thermography using an infrared camera. While the schlieren imaging was used to render the velocity and mass transport of the supplied flow, thermography was implemented to visualize the air temperature distribution induced by the PV. Both studies were conducted using a thermal manikin to simulate an occupant facing a PV outlet. As a reference, the flow supplied by an axial fan and a cased axial fan was visualized with the schlieren system as well and compared to the flow supplied by PV. Schlieren visualization results indicate that the steady, low-turbulence flow supplied by PV was able to penetrate the thermal convective boundary layer encasing the manikin's body, providing clean air for inhalation. Contrarily, the axial fan diffused the supplied air over a large target area with high turbulence intensity; it only disturbed the convective boundary layer rather than destroying it. The cased fan supplied a flow with a reduced target area which allowed supplying more air into the breathing zone compared to the fan. The results of thermography visualization showed that the supplied cool air from PV penetrated the corona-shaped thermal boundary layer. Furthermore, the supplied air cooled the surface temperature of the face, which indicates the large impact of PV on local thermal sensation and comfort.}, subject = {Bildverarbeitung}, language = {en} } @techreport{MuellerSeidelLudwigetal., author = {M{\"u}ller, Christoph and Seidel, Maik and Ludwig, Horst-Michael and M{\"u}ller, Matthias}, title = {Pr{\"u}fung des Frost-Tausalz-Widerstandes von Beton f{\"u}r die Expositionsklasse XF2}, doi = {10.25643/bauhaus-universitaet.4887}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240226-48877}, pages = {34}, abstract = {In cold and moderate climates concrete can be subjected to a combined salt frost attack, which can cause scaling damage. Consequently, numerous test procedures were developed to determine the resistance of concrete compositions against this kind of attack. These tests typically mimic a severe attack with high levels of saturation, e.g. as for concrete pavements. Very few approaches exist for testing the salt frost scaling resistance of concretes, which are subjected only to medium levels of saturation, as such concrete elements typically don't show notable scaling damage. However, the increasing use of low carbon cements with high clinker substitution rates might affect the salt frost scaling resistance of such concrete elements to some extent. To ensure adequate durability of such concretes it is thus desirable to determine their performance in an actual test procedure instead of relying on past experience. Thus, less severe test methods was developed, which are based on the Slab test and the CDF test, repectively.}, subject = {Beton}, language = {de} } @unpublished{KhosraviSheikhKhozaniCooper, author = {Khosravi, Khabat and Sheikh Khozani, Zohreh and Cooper, James R.}, title = {Predicting stable gravel-bed river hydraulic geometry: A test of novel, advanced, hybrid data mining algorithms}, volume = {2021}, doi = {10.25643/bauhaus-universitaet.4499}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211004-44998}, abstract = {Accurate prediction of stable alluvial hydraulic geometry, in which erosion and sedimentation are in equilibrium, is one of the most difficult but critical topics in the field of river engineering. Data mining algorithms have been gaining more attention in this field due to their high performance and flexibility. However, an understanding of the potential for these algorithms to provide fast, cheap, and accurate predictions of hydraulic geometry is lacking. This study provides the first quantification of this potential. Using at-a-station field data, predictions of flow depth, water-surface width and longitudinal water surface slope are made using three standalone data mining techniques -, Instance-based Learning (IBK), KStar, Locally Weighted Learning (LWL) - along with four types of novel hybrid algorithms in which the standalone models are trained with Vote, Attribute Selected Classifier (ASC), Regression by Discretization (RBD), and Cross-validation Parameter Selection (CVPS) algorithms (Vote-IBK, Vote-Kstar, Vote-LWL, ASC-IBK, ASC-Kstar, ASC-LWL, RBD-IBK, RBD-Kstar, RBD-LWL, CVPSIBK, CVPS-Kstar, CVPS-LWL). Through a comparison of their predictive performance and a sensitivity analysis of the driving variables, the results reveal: (1) Shield stress was the most effective parameter in the prediction of all geometry dimensions; (2) hybrid models had a higher prediction power than standalone data mining models, empirical equations and traditional machine learning algorithms; (3) Vote-Kstar model had the highest performance in predicting depth and width, and ASC-Kstar in estimating slope, each providing very good prediction performance. Through these algorithms, the hydraulic geometry of any river can potentially be predicted accurately and with ease using just a few, readily available flow and channel parameters. Thus, the results reveal that these models have great potential for use in stable channel design in data poor catchments, especially in developing nations where technical modelling skills and understanding of the hydraulic and sediment processes occurring in the river system may be lacking.}, subject = {Maschinelles Lernen}, language = {en} } @article{VakkariVoelskePotthastetal., author = {Vakkari, Pertti and V{\"o}lske, Michael and Potthast, Martin and Hagen, Matthias and Stein, Benno}, title = {Predicting essay quality from search and writing behavior}, series = {Journal of Association for Information Science and Technology}, volume = {2021}, journal = {Journal of Association for Information Science and Technology}, number = {volume 72, issue 7}, publisher = {Wiley}, address = {Hoboken, NJ}, doi = {10.1002/asi.24451}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44692}, pages = {839 -- 852}, abstract = {Few studies have investigated how search behavior affects complex writing tasks. We analyze a dataset of 150 long essays whose authors searched the ClueWeb09 corpus for source material, while all querying, clicking, and writing activity was meticulously recorded. We model the effect of search and writing behavior on essay quality using path analysis. Since the boil-down and build-up writing strategies identified in previous research have been found to affect search behavior, we model each writing strategy separately. Our analysis shows that the search process contributes significantly to essay quality through both direct and mediated effects, while the author's writing strategy moderates this relationship. Our models explain 25-35\% of the variation in essay quality through rather simple search and writing process characteristics alone, a fact that has implications on how search engines could personalize result pages for writing tasks. Authors' writing strategies and associated searching patterns differ, producing differences in essay quality. In a nutshell: essay quality improves if search and writing strategies harmonize—build-up writers benefit from focused, in-depth querying, while boil-down writers fare better with a broader and shallower querying strategy.}, subject = {Information Retrieval}, language = {en} } @article{SchmitzKraft, author = {Schmitz, Tonia and Kraft, Eckhard}, title = {Pilot scale photobioreactor system for land-based macroalgae cultivation}, series = {Journal of Applied Phycology}, volume = {2021}, journal = {Journal of Applied Phycology}, doi = {10.1007/s10811-021-02617-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211207-45401}, pages = {1 -- 10}, abstract = {Marine macroalgae such as Ulva intestinalis have promising properties as feedstock for cosmetics and pharmaceuticals. However, since the quantity and quality of naturally grown algae vary widely, their exploitability is reduced - especially for producers in high-priced markets. Moreover, the expansion of marine or shore-based cultivation systems is unlikely in Europe, since promising sites either lie in fishing zones, recreational areas, or natural reserves. The aim was therefore to develop a closed photobioreactor system enabling full control of abiotic environmental parameters and an effective reconditioning of the cultivation medium in order to produce marine macroalgae at sites distant from the shore. To assess the feasibility and functionality of the chosen technological concept, a prototypal plant has been implemented in central Germany - a site distant from the sea. Using a newly developed, submersible LED light source, cultivation experiments with Ulva intestinalis led to growth rates of 7.72 ± 0.04 \% day-1 in a cultivation cycle of 28 days. Based on the space demand of the production system, this results in fresh mass productivity of 3.0 kg m-2, respectively, of 1.1 kg m-2 per year. Also considering the ratio of biomass to energy input amounting to 2.76 g kWh-1, significant future improvements of the developed photobioreactor system should include the optimization of growth parameters, and the reduction of the system's overall energy demand.}, subject = {Makroalgen}, language = {en} } @article{MehlingSchnabelLondong, author = {Mehling, Simon and Schnabel, Tobias and Londong, J{\"o}rg}, title = {Photocatalytic ozonation in an immersion rotary body reactor for the removal of micro-pollutants from the effluent of wastewater treatment plants}, series = {Water Science \& Technology}, volume = {2022}, journal = {Water Science \& Technology}, number = {volume 85, issue 1}, publisher = {IWA Publishing}, address = {London}, doi = {10.2166/wst.2021.617}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220209-45865}, pages = {535 -- 548}, abstract = {Carrier-bound titanium dioxide catalysts were used in a photocatalytic ozonation reactor for the degradation of micro-pollutants in real wastewater. A photocatalytic immersion rotary body reactor with a 36-cm disk diameter was used, and was irradiated using UV-A light-emitting diodes. The rotating disks were covered with catalysts based on stainless steel grids coated with titanium dioxide. The dosing of ozone was carried out through the liquid phase via an external enrichment and a supply system transverse to the flow direction. The influence of irradiation power and ozone dose on the degradation rate for photocatalytic ozonation was investigated. In addition, the performance of the individual processes photocatalysis and ozonation were studied. The degradation kinetics of the parent compounds were determined using liquid chromatography tandem mass spectrometry. First-order kinetics were determined for photocatalysis and photocatalytic ozonation. A maximum reaction rate of the reactor was determined, which could be achieved by both photocatalysis and photocatalytic ozonation. At a dosage of 0.4 mg /mg DOC, the maximum reaction rate could be achieved using 75\% of the irradiation power used for sole photocatalysis, allowing increases in the energetic efficiency of photocatalytic wastewater treatment processes. The process of photocatalytic ozonation is suitable to remove a wide spectrum of micro-pollutants from wastewater.}, subject = {Abwasserreinigung}, language = {en} } @phdthesis{Goswami, author = {Goswami, Somdatta}, title = {Phase field modeling of fracture with isogeometric analysis and machine learning methods}, doi = {10.25643/bauhaus-universitaet.4384}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210304-43841}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {168}, abstract = {This thesis presents the advances and applications of phase field modeling in fracture analysis. In this approach, the sharp crack surface topology in a solid is approximated by a diffusive crack zone governed by a scalar auxiliary variable. The uniqueness of phase field modeling is that the crack paths are automatically determined as part of the solution and no interface tracking is required. The damage parameter varies continuously over the domain. But this flexibility comes with associated difficulties: (1) a very fine spatial discretization is required to represent sharp local gradients correctly; (2) fine discretization results in high computational cost; (3) computation of higher-order derivatives for improved convergence rates and (4) curse of dimensionality in conventional numerical integration techniques. As a consequence, the practical applicability of phase field models is severely limited. The research presented in this thesis addresses the difficulties of the conventional numerical integration techniques for phase field modeling in quasi-static brittle fracture analysis. The first method relies on polynomial splines over hierarchical T-meshes (PHT-splines) in the framework of isogeometric analysis (IGA). An adaptive h-refinement scheme is developed based on the variational energy formulation of phase field modeling. The fourth-order phase field model provides increased regularity in the exact solution of the phase field equation and improved convergence rates for numerical solutions on a coarser discretization, compared to the second-order model. However, second-order derivatives of the phase field are required in the fourth-order model. Hence, at least a minimum of C1 continuous basis functions are essential, which is achieved using hierarchical cubic B-splines in IGA. PHT-splines enable the refinement to remain local at singularities and high gradients, consequently reducing the computational cost greatly. Unfortunately, when modeling complex geometries, multiple parameter spaces (patches) are joined together to describe the physical domain and there is typically a loss of continuity at the patch boundaries. This decrease of smoothness is dictated by the geometry description, where C0 parameterizations are normally used to deal with kinks and corners in the domain. Hence, the application of the fourth-order model is severely restricted. To overcome the high computational cost for the second-order model, we develop a dual-mesh adaptive h-refinement approach. This approach uses a coarser discretization for the elastic field and a finer discretization for the phase field. Independent refinement strategies have been used for each field. The next contribution is based on physics informed deep neural networks. The network is trained based on the minimization of the variational energy of the system described by general non-linear partial differential equations while respecting any given law of physics, hence the name physics informed neural network (PINN). The developed approach needs only a set of points to define the geometry, contrary to the conventional mesh-based discretization techniques. The concept of `transfer learning' is integrated with the developed PINN approach to improve the computational efficiency of the network at each displacement step. This approach allows a numerically stable crack growth even with larger displacement steps. An adaptive h-refinement scheme based on the generation of more quadrature points in the damage zone is developed in this framework. For all the developed methods, displacement-controlled loading is considered. The accuracy and the efficiency of both methods are studied numerically showing that the developed methods are powerful and computationally efficient tools for accurately predicting fractures.}, subject = {Phasenfeldmodell}, language = {en} } @phdthesis{Shamskooshki, author = {Shamskooshki, Hanieh}, title = {Perception of Socio-Spatial Segregation: The Interaction of Physical and Social Urban Space-Study case of Tehran Neighborhoods}, doi = {10.25643/bauhaus-universitaet.4466}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210802-44666}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {"How to understand the interaction between urban space and social processes" is a significant question in urban studies. To answer that, the city needs to be recognized as both a physical and a social entity and urban theory and practice need to connect these (Hillier 2007). The present research aims to re-examine the complex correlation between spatial and social inequality manifestations in the city of Tehran regarding the concept of segregation. It observes the causes and consequences of segregation in Tehran and provides an insight into both concepts of socio-spatial segregation and neighborhood effects and creates a link between them. First, I argue when, where, and for whom spatial locations affect the chances of social networks in Tehran. Then, I discuss how neighborhood effects can emerge via social network mechanisms and thus affect the perceptions of residents in the neighborhoods.}, subject = {Soziales Netzwerk}, language = {en} } @phdthesis{Chawdhury, author = {Chawdhury, Samir}, title = {Partitioned Algorithms using Vortex Particle Methods for Fluid-Structure Interaction of Thin-walled Flexible Structures}, publisher = {arts + science weimar GmbH}, address = {Weimar}, isbn = {978-3-95773-297-2}, doi = {10.25643/bauhaus-universitaet.6404}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230703-64042}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {256}, abstract = {Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid-structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size.}, subject = {Windenergie}, language = {en} } @article{Kleiner, author = {Kleiner, Florian}, title = {Optimization and semi-automatic evaluation of a frosting process for a soda lime silicate glass based on phosphoric acid}, series = {International Journal of Applied Glass Science}, journal = {International Journal of Applied Glass Science}, publisher = {John Wiley \& Sons}, doi = {10.1111/ijag.15866}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210701-44548}, pages = {1 -- 8}, abstract = {Chemical glass frosting processes are widely used to create visual attractive glass surfaces. A commonly used frosting bath mainly contains ammonium bifluoride (NH4HF2) mixed with hydrochloric acid (HCl). The frosting process consists of several baths. Firstly, the preliminary bath to clean the object. Secondly, the frosting bath which etches the rough light scattering structure into the glass surface. Finally, the washing baths to clean the frosted object. This is where the constituents of the preceding steps accumulate and have to be filtered from the sewage. In the present contribution, phosphoric acid (H3PO4) was used as a substitute for HCl to reduce the amount of ammonium (NH4+) and chloride (Cl-) dissolved in the waste water. In combination with magnesium carbonate (MgCO3), it allows the precipitation of ammonium within the sewage as ammonium magnesium phosphate (MgNH4PO4). However, a trivial replacement of HCl by H3PO4 within the frosting process causes extensive frosting errors, such as inhomogeneous size distributions of the structures or domains that are not fully covered by these structures. By modifying the preliminary bath composition, it was possible to improve the frosting result considerably. To determine the optimal composition of the preliminary bath, a semi-automatic evaluation method has been developed. This method renders the objective comparison of the resulting surface quality possible.}, subject = {Silicatglas}, language = {en} } @article{WiegmannKerstenSenaratneetal., author = {Wiegmann, Matti and Kersten, Jens and Senaratne, Hansi and Potthast, Martin and Klan, Friederike and Stein, Benno}, title = {Opportunities and risks of disaster data from social media: a systematic review of incident information}, series = {Natural Hazards and Earth System Sciences}, volume = {2021}, journal = {Natural Hazards and Earth System Sciences}, number = {Volume 21, Issue 5}, publisher = {European Geophysical Society}, address = {Katlenburg-Lindau}, doi = {10.5194/nhess-21-1431-2021}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44634}, pages = {1431 -- 1444}, abstract = {Compiling and disseminating information about incidents and disasters are key to disaster management and relief. But due to inherent limitations of the acquisition process, the required information is often incomplete or missing altogether. To fill these gaps, citizen observations spread through social media are widely considered to be a promising source of relevant information, and many studies propose new methods to tap this resource. Yet, the overarching question of whether and under which circumstances social media can supply relevant information (both qualitatively and quantitatively) still remains unanswered. To shed some light on this question, we review 37 disaster and incident databases covering 27 incident types, compile a unified overview of the contained data and their collection processes, and identify the missing or incomplete information. The resulting data collection reveals six major use cases for social media analysis in incident data collection: (1) impact assessment and verification of model predictions, (2) narrative generation, (3) recruiting citizen volunteers, (4) supporting weakly institutionalized areas, (5) narrowing surveillance areas, and (6) reporting triggers for periodical surveillance. Furthermore, we discuss the benefits and shortcomings of using social media data for closing information gaps related to incidents and disasters.}, subject = {Katastrophe}, language = {en} } @article{RenZhuangOterkusetal., author = {Ren, Huilong and Zhuang, Xiaoying and Oterkus, Erkan and Zhu, Hehua and Rabczuk, Timon}, title = {Nonlocal strong forms of thin plate, gradient elasticity, magneto-electro-elasticity and phase-field fracture by nonlocal operator method}, series = {Engineering with Computers}, volume = {2021}, journal = {Engineering with Computers}, doi = {10.1007/s00366-021-01502-8}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211207-45388}, pages = {1 -- 22}, abstract = {The derivation of nonlocal strong forms for many physical problems remains cumbersome in traditional methods. In this paper, we apply the variational principle/weighted residual method based on nonlocal operator method for the derivation of nonlocal forms for elasticity, thin plate, gradient elasticity, electro-magneto-elasticity and phase-field fracture method. The nonlocal governing equations are expressed as an integral form on support and dual-support. The first example shows that the nonlocal elasticity has the same form as dual-horizon non-ordinary state-based peridynamics. The derivation is simple and general and it can convert efficiently many local physical models into their corresponding nonlocal forms. In addition, a criterion based on the instability of the nonlocal gradient is proposed for the fracture modelling in linear elasticity. Several numerical examples are presented to validate nonlocal elasticity and the nonlocal thin plate.}, subject = {Bruchmechanik}, language = {en} } @phdthesis{Baron, author = {Baron, Nicole}, title = {Natural Urban Resilience: Understanding general urban resilience through Addis Ababa's inner city}, doi = {10.25643/bauhaus-universitaet.4416}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210428-44166}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This dissertation describes the urban actors and spatial practices that contribute to natural urban resilience in Addis Ababa's inner city. Natural urban resilience is a non-strategical and bottom-up, everyday form of general urban resilience - an urban system's ability to maintain its essential characteristics under any change. This study gains significance by exposing conceptual gaps in the current un-derstanding of general urban resilience and highlighting its unconvincing applicability to African cities. This study attains further relevance by highlighting the danger of the ongoing large-scale redevelopment of the inner city. The inner city has naturally formed, and its urban memory, spaces, and social cohesion contribute to its primarily low-income population's resilience. This thesis argues that the inner city's demolition poses an incalculable risk of maladaptation to future stresses and shocks for Addis Ababa. The city needs a balanced urban discourse that highlights the inner city's qualities and suggests feasible urban transformation measures. "Natural Urban Resilience" contributes an empirical study to the debate by identifying those aspects of the inner city that contribute to general resilience and identifies feasible action areas. This study develops a qualitative research design for a single case study in Addis Ababa. The data is obtained through expert interviews, interviews with resi-dents, and the analysis of street scene photos, which are abstracted using Grounded Theory. That way, this thesis provides first-time knowledge about who and what generates urban resilience in the inner city of Addis Ababa and how. Furthermore, the study complements existing theories on general urban resilience. It provides a detailed understanding of the change mechanisms in resilience, of which it identifies four: adaptation, upgrading, mitigation, and resistance. It also adapts the adaptive cycle, a widely used concept in resilience thinking, conceptually for urban environments. The study concludes that the inner city's continued redevelopment poses an incalculable threat to the entire city. Therefore, "Natural urban resilience" recommends carefully weighing any intervention in the inner city to promote Addis Ababa's overall resilience. This dissertation proposes a pattern language for natural urban resilience to support these efforts and to translate the model of natural urban resilience into practice.}, subject = {Stadtforschung}, language = {en} } @article{NooriMortazaviKeshtkarietal., author = {Noori, Hamidreza and Mortazavi, Bohayra and Keshtkari, Leila and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Nanopore creation in MoS2 and graphene monolayers by nanoparticles impact: a reactive molecular dynamics study}, series = {Applied Physics A}, volume = {2021}, journal = {Applied Physics A}, number = {volume 127, article 541}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s00339-021-04693-5}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44756}, pages = {1 -- 13}, abstract = {In this work, extensive reactive molecular dynamics simulations are conducted to analyze the nanopore creation by nano-particles impact over single-layer molybdenum disulfide (MoS2) with 1T and 2H phases. We also compare the results with graphene monolayer. In our simulations, nanosheets are exposed to a spherical rigid carbon projectile with high initial velocities ranging from 2 to 23 km/s. Results for three different structures are compared to examine the most critical factors in the perforation and resistance force during the impact. To analyze the perforation and impact resistance, kinetic energy and displacement time history of the projectile as well as perforation resistance force of the projectile are investigated. Interestingly, although the elasticity module and tensile strength of the graphene are by almost five times higher than those of MoS2, the results demonstrate that 1T and 2H-MoS2 phases are more resistive to the impact loading and perforation than graphene. For the MoS2nanosheets, we realize that the 2H phase is more resistant to impact loading than the 1T counterpart. Our reactive molecular dynamics results highlight that in addition to the strength and toughness, atomic structure is another crucial factor that can contribute substantially to impact resistance of 2D materials. The obtained results can be useful to guide the experimental setups for the nanopore creation in MoS2or other 2D lattices.}, subject = {Nanomechanik}, language = {en} } @article{CappachionePartschefeldOsburgetal., author = {Cappachione, Clotilde and Partschefeld, Stephan and Osburg, Andrea and Gliubizzi, Rocco and Gaeta, Carmine}, title = {Modified Carboxymethylcellulose-Based Scaffolds as New Potential Ecofriendly Superplasticizers with a Retardant Effect for Mortar: From the Synthesis to the Application}, series = {Materials}, volume = {2021}, journal = {Materials}, number = {volume 14, issue 13, article 3569}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma14133569}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44689}, pages = {1 -- 17}, abstract = {This article is focused on the research and development of new cellulose ether derivatives as innovative superplasticizers for mortar systems. Several synthetic strategies have been pursued to obtain new compounds to study their properties on cementitious systems as new bio-based additives. The new water-soluble admixtures were synthesized using a complex carboxymethylcellulose-based backbone that was first hydrolyzed and then sulfo-ethylated in the presence of sodium vinyl sulphonate. Starting with a complex biopolymer that is widely known as a thickening agent was very challenging. Only by varying the hydrolysis times and temperatures of the reactions was achieved the aimed goal. The obtained derivatives showed different molecular weight (Mw) and anionic charges on their backbones. An improvement in shear stress and dynamic viscosity values of CEM II 42.5R cement was observed with the samples obtained with a longer time of higher temperature hydrolysis and sulfo-ethylation. Investigations into the chemical nature of the pore solution, calorimetric studies and adsorption experiments clearly showed the ability of carboxymethyl cellulose superplasticizer (CMC SP) to interact with cement grains and influence hydration processes within a 48-h time window, causing a delay in hydration reactions in the samples. The fluidity of the cementitious matrices was ascertained through slump test and preliminary studies of mechanical and flexural strength of the hardened mortar formulated with the new ecological additives yielded values in terms of mechanical properties. Finally, the computed tomography (CT) images completed the investigation of the pore network structure of hardened specimens, highlighting their promising structure porosity.}, subject = {M{\"o}rtel}, language = {en} } @article{MeiabadiMoradiKaramimoghadametal., author = {Meiabadi, Mohammad Saleh and Moradi, Mahmoud and Karamimoghadam, Mojtaba and Ardabili, Sina and Bodaghi, Mahdi and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Modeling the Producibility of 3D Printing in Polylactic Acid Using Artificial Neural Networks and Fused Filament Fabrication}, series = {polymers}, volume = {2021}, journal = {polymers}, number = {Volume 13, issue 19, article 3219}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym13193219}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220110-45518}, pages = {1 -- 21}, abstract = {Polylactic acid (PLA) is a highly applicable material that is used in 3D printers due to some significant features such as its deformation property and affordable cost. For improvement of the end-use quality, it is of significant importance to enhance the quality of fused filament fabrication (FFF)-printed objects in PLA. The purpose of this investigation was to boost toughness and to reduce the production cost of the FFF-printed tensile test samples with the desired part thickness. To remove the need for numerous and idle printing samples, the response surface method (RSM) was used. Statistical analysis was performed to deal with this concern by considering extruder temperature (ET), infill percentage (IP), and layer thickness (LT) as controlled factors. The artificial intelligence method of artificial neural network (ANN) and ANN-genetic algorithm (ANN-GA) were further developed to estimate the toughness, part thickness, and production-cost-dependent variables. Results were evaluated by correlation coefficient and RMSE values. According to the modeling results, ANN-GA as a hybrid machine learning (ML) technique could enhance the accuracy of modeling by about 7.5, 11.5, and 4.5\% for toughness, part thickness, and production cost, respectively, in comparison with those for the single ANN method. On the other hand, the optimization results confirm that the optimized specimen is cost-effective and able to comparatively undergo deformation, which enables the usability of printed PLA objects.}, subject = {3D-Druck}, language = {en} } @article{LondongBarthSoebke, author = {Londong, J{\"o}rg and Barth, Marcus and S{\"o}bke, Heinrich}, title = {Modeling and Simulation of Source Separation in Sanitation Systems for Reducing Emissions of Antimicrobial Resistances}, series = {Water}, volume = {2021}, journal = {Water}, number = {Volume 13, issue 23, article 3342}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/w13233342}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211202-45338}, pages = {1 -- 19}, abstract = {Antimicrobial resistance (AMR) is identified by the World Health Organization (WHO) as one of the top ten threats to public health worldwide. In addition to public health, AMR also poses a major threat to food security and economic development. Current sanitation systems contribute to the emergence and spread of AMR and lack effective AMR mitigation measures. This study assesses source separation of blackwater as a mitigation measure against AMR. A source-separation-modified combined sanitation system with separate collection of blackwater and graywater is conceptually described. Measures taken at the source, such as the separate collection and discharge of material flows, were not considered so far on a load balance basis, i.e., they have not yet been evaluated for their effectiveness. The sanitation system described is compared with a combined system and a separate system regarding AMR emissions by means of simulation. AMR is represented in the simulation model by one proxy parameter each for antibiotics (sulfamethoxa-zole), antibiotic-resistant bacteria (extended-spectrum beta-lactamase E. Coli), and antibiotic re-sistance genes (blaTEM). The simulation results suggest that the source-separation-based sanitation system reduces emissions of antibiotic-resistant bacteria and antibiotic resistance genes into the aquatic environment by more than six logarithm steps compared to combined systems. Sulfa-methoxazole emissions can be reduced by 75.5\% by keeping blackwater separate from graywater and treating it sufficiently. In summary, sanitation systems incorporating source separation are, to date, among the most effective means of preventing the emission of AMR into the aquatic envi-ronment.}, subject = {Abwasser}, language = {en} } @phdthesis{Berhe, author = {Berhe, Asgedom Haile}, title = {Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia}, doi = {10.25643/bauhaus-universitaet.4517}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211007-45175}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {336}, abstract = {This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that. However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes. Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings. By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors' as an opportunity for corruption. In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects' value chain. These propositions are made in reliance on BIM's present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM's synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies.}, subject = {Building Information Modeling}, language = {en} } @phdthesis{Stang, author = {Stang, Ren{\´e}}, title = {Methode zur {\"O}koeffizienzbewertung w{\"a}rmetechnischer Anlagen in Geb{\"a}uden}, publisher = {VDI Verlag}, address = {D{\"u}sseldorf}, isbn = {978-3-18-300623-6 (print)}, doi = {10.25643/bauhaus-universitaet.4528}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211119-45280}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {222}, abstract = {Die vorliegende Arbeit richtet sich an Ingenieur*innen und Wissenschaftler*innen der technischen Geb{\"a}udeausr{\"u}stung. Sie greift einen sich abzeichnenden {\"A}nderungsbedarf in der Umwelt- und Nachhaltigkeitsbewertung von Geb{\"a}uden und w{\"a}rmetechnischen Anlagen auf. Der aktuell genutzte nicht erneuerbare Prim{\"a}renergiebedarf wird insbesondere hinsichtlich k{\"u}nftiger politischer Klima- und Umweltschutzziele als alleinige Bewertungsgr{\"o}ße nicht ausreichend sein. Die mit dieser Arbeit vorgestellte {\"O}koeffizienzbewertungsmethode kann als geeignetes Instrument zur L{\"o}sung der Probleme beitragen. Sie erm{\"o}glicht systematische, ganzheitliche Bewertungen und reproduzierbare Vergleiche w{\"a}rmetechnischer Anlagen bez{\"u}glich ihrer {\"o}kologischen und {\"o}konomischen Nachhaltigkeit. Die wesentlichsten Neuentwicklungen sind die spezifische Umweltleistung, in Erweiterung zum genutzten Prim{\"a}renergiefaktor, und der {\"O}koeffizienzindikator UWI.}, subject = {Energiewirtschaft}, language = {de} } @inproceedings{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Measuring and visualizing the flow supplied by personalized ventilation}, series = {Proceedings Book Roomvent 2020}, booktitle = {Proceedings Book Roomvent 2020}, address = {Turin, Italy}, doi = {10.25643/bauhaus-universitaet.4657}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220622-46573}, abstract = {This study investigates the flow supplied by personalized ventilation (PV) by means of anemometer measurements and schlieren visualization. The study was conducted using a thermal manikin to simulate a seated occupant facing a PV outlet. Air velocity was measured at multiple points in the flow field; the collected velocity values were used to calculate the turbulence intensity. Results indicated that PV was supplying air with low turbulence intensity that was able to penetrate the convective boundary layer of the manikin to supply clean air for inhalation. The convective boundary layer, however, obstructed the supplied flow and reduced its velocity by a total of 0.26 m/s. The PV flow preserved its value until about 10 cm from the face where velocity started to drop. Further investigations were conducted to test a PV diffuser with a relatively large outlet diameter (18 cm). This diffuser was developed using 3d-modelling and 3d-printing. The diffuser successfully distributed the flow over the larger outlet area. However, the supplied velocity and turbulence fields were not uniform across the section.}, subject = {Bel{\"u}ftung}, language = {en} } @article{Legatiuk, author = {Legatiuk, Dmitrii}, title = {Mathematical Modelling by Help of Category Theory: Models and Relations between Them}, series = {mathematics}, volume = {2021}, journal = {mathematics}, number = {volume 9, issue 16, article 1946}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math9161946}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210817-44844}, pages = {17}, abstract = {The growing complexity of modern practical problems puts high demand on mathematical modelling. Given that various models can be used for modelling one physical phenomenon, the role of model comparison and model choice is becoming particularly important. Methods for model comparison and model choice typically used in practical applications nowadays are computationbased, and thus time consuming and computationally costly. Therefore, it is necessary to develop other approaches to working abstractly, i.e., without computations, with mathematical models. An abstract description of mathematical models can be achieved by the help of abstract mathematics, implying formalisation of models and relations between them. In this paper, a category theory-based approach to mathematical modelling is proposed. In this way, mathematical models are formalised in the language of categories, relations between the models are formally defined and several practically relevant properties are introduced on the level of categories. Finally, an illustrative example is presented, underlying how the category-theory based approach can be used in practice. Further, all constructions presented in this paper are also discussed from a modelling point of view by making explicit the link to concrete modelling scenarios.}, subject = {Kategorientheorie}, language = {en} } @misc{Koenigshofen, author = {K{\"o}nigshofen, Max}, title = {Mahnmal oder Tanztempel? Das Funkhaus und seine Rolle in der Weimarer Clubkultur}, volume = {2021}, publisher = {Lucia Verlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4437}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210603-44377}, pages = {40}, abstract = {Im S{\"u}dwesten Weimars befindet sich ein leerstehender Geb{\"a}udekomplex, der im Stadtraum heute unter dem Namen Funkhaus und vor allem f{\"u}r studentisch organisierte Partys bekannt ist. Doch das Geb{\"a}ude entstand urspr{\"u}nglich nicht als Radiostation, sondern zwischen 1937 und 1944 als Prestigeprojekt des nationalsozialistisch zugespitzten Nietzsche-Kults. Diese Projektarbeit beleuchtet anhand von Archivalien und Expertinneninterviews die Nutzungsgeschichte der ehemaligen »Nietzsche-Ged{\"a}chtnishalle« und wirft die Frage auf, ob und wie ein solcher NS-Bau als Partylocation genutzt werden kann.}, subject = {Funkhaus}, language = {de} } @phdthesis{Hoerold, author = {H{\"o}rold, Stefan}, title = {Leistungsbezogene Musterjahresganglinien f{\"u}r den Straßenbetriebsdienst}, doi = {10.25643/bauhaus-universitaet.4491}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210830-44910}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {124}, abstract = {In den letzten Jahrzehnten unterlag der Straßenbetriebsdienst tiefgreifenden Ver{\"a}nderungen. Diese Ver{\"a}nderungen schließt auch die betriebliche Steuerungsphilosophie ein, um eine planungsrationale und {\"o}konomische Gestaltung des Straßenbetriebsdienstes zu unterst{\"u}tzen. Dabei erfolgt eine verbindliche Vorgabe der Leistungsinhalte und -umf{\"a}nge und erm{\"o}glicht eine Budgetierung f{\"u}r das vorgesehene Jahresarbeitsprogramm. Ziel der Untersuchung ist die Entwicklung eines Modells f{\"u}r die Ermittlung von leistungsbezogenen Musterjahresganglinien zur Unterst{\"u}tzung der Jahresarbeitsplanung. Daf{\"u}r lagen f{\"u}r jede Leistung des Leistungsbereiches „Gr{\"u}npflege" jeweils 260 einzelne Jahresganglinien vor. Im Ergebnis der Untersuchung wird die leistungsbezogene Musterjahresganglinie in vier Schritten ermittelt. Im ersten Schritt erfolgt die Pr{\"u}fung der Datenqualit{\"a}t; im zweiten Schritt eine Korrelationsanalyse; im dritten Schritt die fachliche {\"U}berpr{\"u}fung der Leistungsauspr{\"a}gung und im vierten Schritt die Ermittlung der leistungsbezogenen Musterjahresganglinie aus den verbliebenen leistungsbezogenen Jahresganglinien.}, subject = {Straßenbetriebsdienst}, language = {de} } @book{OPUS4-4280, title = {Klangwelten gestalten. Zur Aktualit{\"a}t des Bauhauses in Sound Design und auditiver Stadtplanung}, volume = {2021}, editor = {Czolbe, Fabian and Pfleiderer, Martin}, publisher = {Mensch und Buch Verlag}, address = {Berlin}, isbn = {978-3-96729-089-9}, doi = {10.25643/bauhaus-universitaet.4280}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210219-42808}, publisher = {Hochschule f{\"u}r Musik FRANZ LISZT}, pages = {169}, abstract = {Die Gestaltung von Klangwelten ist in den letzten Jahrzehnten in den Fokus von Stadtplanern und Architekten, Produkt-Designern und Musikproduzenten, aber auch der historischen und kulturwissenschaftlichen Forschung ger{\"u}ckt. Der Tagungsband versteht sich als ein Beitrag zu diesem neuen Praxis- und Forschungsfeld. Er will zugleich Bezugspunkte zu Konzepten des Bauhauses als einem historischen Vorl{\"a}ufer aufzeigen.}, subject = {Sound Design}, language = {de} } @masterthesis{Pantzier, type = {Bachelor Thesis}, author = {Pantzier, Richard}, title = {In Neuer Frische. Die Sommerfrische Schwarzatal als regional selbstbestimmte Form des historischen Ph{\"a}nomens Sommerfrische?}, doi = {10.25643/bauhaus-universitaet.4505}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210924-45055}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {202}, abstract = {Als Fr{\"u}hform des Tourismus war die Sommerfrische ab Mitte des 19. Jahrhunderts eng mit der fl{\"a}chendeckenden Verst{\"a}dterung in Mitteleuropa und der Herausbildung eines urbanen B{\"u}rgertums verkn{\"u}pft. Nachdem sich der Begriff in der zweiten H{\"a}lfte des 20. Jahrhunderts im Sprachgebrauch verlor, erf{\"a}hrt er gegenw{\"a}rtig - auch im Zuge einer neuen positiven Konnotation des L{\"a}ndlichen - eine Art Renaissance. Im Schwarzatal als einer historischen Zielregion dieser Reisepraxis arbeitet der lokale Verein Zukunftswerkstatt Schwarzatal gemeinsam mit der IBA Th{\"u}ringen an einer zeitgen{\"o}ssischen Form der Sommerfrische, die auch Antworten auf den tiefgreifenden Strukturwandel nach 1989 geben soll. Die Arbeit thematisiert die programmatische Renaissance der Sommerfrische im Schwarzatal und stellt sie dem historischen Ph{\"a}nomen der Sommerfrische des 19. und 20. Jahrhunderts unter den drei Forschungsfragen gegen{\"u}ber. Die Forschungsfragen nehmen Bezug auf die soziale, die materielle sowie die symbolische Dimension der Raumkonstitution beider Sommerfrischen, indem nach den jeweiligen Akteuren, den Regeln der physischen Umgestaltung sowie den hegemonialen Vorstellungen {\"u}ber die Zielorte gefragt wird. Die Arbeit ordnet sich entsprechend in eine sozialkonstruktivistische Geographie des L{\"a}ndlichen ein. Sie gibt schließlich Auskunft dar{\"u}ber, warum es sich bei der Sommerfrische Schwarzatal um eine regional selbstbestimmte Form der Sommerfrische handelt.}, subject = {Sommerfrische}, language = {de} } @misc{Vollmer, author = {Vollmer, Lisa}, title = {In die G{\"a}nge gekommen: Kooperation von Zivilgesellschaft und Stadtpolitik. Rezension zu Michael Ziehl (2020): Koproduktion urbaner Resilienz. Das G{\"a}ngeviertel in Hamburg als Reallabor f{\"u}r eine zukunftsf{\"a}hige Stadtentwicklung mittels Kooperation von Zivilgesellschaft, Politik und Verwaltung.}, series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, volume = {2021}, journal = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, number = {Band 9, Heft 1/2}, publisher = {sub\urban e. V.}, address = {Berlin}, doi = {10.36900/suburban.v9i1/2.681}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44798}, pages = {241 -- 247}, abstract = {Schlagworte wir Kooperation, Koproduktion und Kollaboration sind in Planungswissenschaften und Architektur schwer in Mode. Selten wird allerdings dargelegt, was diese Art(en) der Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren auf der einen Seite und staatlichen Akteuren aus Politik und Verwaltung auf der anderen Seite von gew{\"o}hnlichen Formen der Partizipation und B{\"u}rger_innenbeteiligung unterscheidet. Anders im Buch von Michael Ziehl: Ihm gelingt es, anhand eines Fallbeispiels die intensive Zusammenarbeit zwischen Aktivist_innen rund ums Hamburger G{\"a}ngeviertel und verschiedenen st{\"a}dtischen Institutionen detailliert nachzuzeichnen und damit den qualitativen Unterschied zwischen Kooperation und Beteiligung nachvollziehbar zu machen.}, subject = {Hamburg}, language = {de} } @phdthesis{Harirchian, author = {Harirchian, Ehsan}, title = {Improved Rapid Assessment of Earthquake Hazard Safety of Existing Buildings Using a Hierarchical Type-2 Fuzzy Logic Model}, doi = {10.25643/bauhaus-universitaet.4396}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210326-43963}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {143}, abstract = {Although it is impractical to avert subsequent natural disasters, advances in simulation science and seismological studies make it possible to lessen the catastrophic damage. There currently exists in many urban areas a large number of structures, which are prone to damage by earthquakes. These were constructed without the guidance of a national seismic code, either before it existed or before it was enforced. For instance, in Istanbul, Turkey, as a high seismic area, around 90\% of buildings are substandard, which can be generalized into other earthquakeprone regions in Turkey. The reliability of this building stock resulting from earthquake-induced collapse is currently uncertain. Nonetheless, it is also not feasible to perform a detailed seismic vulnerability analysis on each building as a solution to the scenario, as it will be too complicated and expensive. This indicates the necessity of a reliable, rapid, and computationally easy method for seismic vulnerability assessment, commonly known as Rapid Visual Screening (RVS). In RVS methodology, an observational survey of buildings is performed, and according to the data collected during the visual inspection, a structural score is calculated without performing any structural calculations to determine the expected damage of a building and whether the building needs detailed assessment. Although this method might save time and resources due to the subjective/qualitative judgments of experts who performed the inspection, the evaluation process is dominated by vagueness and uncertainties, where the vagueness can be handled adequately through the fuzzy set theory but do not cover all sort of uncertainties due to its crisp membership functions. In this study, a novel method of rapid visual hazard safety assessment of buildings against earthquake is introduced in which an interval type-2 fuzzy logic system (IT2FLS) is used to cover uncertainties. In addition, the proposed method provides the possibility to evaluate the earthquake risk of the building by considering factors related to the building importance and exposure. A smartphone app prototype of the method has been introduced. For validation of the proposed method, two case studies have been selected, and the result of the analysis presents the robust efficiency of the proposed method.}, subject = {Fuzzy-Logik}, language = {en} } @phdthesis{Sproete, author = {Spr{\"o}te, Daniel}, title = {Immobilienportfoliomanagement {\"o}ffentlicher musealer Schl{\"o}sserverwaltungen - Daten zur Investitionssteuerung}, doi = {10.25643/bauhaus-universitaet.4426}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210510-44260}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {220}, abstract = {Die Arbeit leistet einen wissenschaftlichen Beitrag zur Erforschung der Einsatzm{\"o}glichkeiten eines Immobilienportfoliomanagements f{\"u}r {\"o}ffentliche museale Schl{\"o}sserverwaltungen in Deutschland. Insbesondere wird ein f{\"u}r deren Organisation spezifisches Modell zur Investitionssteuerung herausgearbeitet und dessen Anwendbarkeit in der Praxis mit Experten diskutiert.}, subject = {Unbewegliche Sache}, language = {de} } @phdthesis{Weissker, author = {Weißker, Tim}, title = {Group Navigation in Multi-User Virtual Reality}, doi = {10.25643/bauhaus-universitaet.4530}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211124-45305}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {148}, abstract = {Multi-user virtual reality systems enable collocated as well as distributed users to perform collaborative activities in immersive virtual environments. A common activity in this context is to move from one location to the next as a group to explore the environment together. The simplest solution to realize these multi-user navigation processes is to provide each participant with a technique for individual navigation. However, this approach entails some potentially undesirable consequences such as the execution of a similar navigation sequence by each participant, a regular need for coordination within the group, and, related to this, the risk of losing each other during the navigation process. To overcome these issues, this thesis performs research on group navigation techniques that move group members together through a virtual environment. The presented work was guided by four overarching research questions that address the quality requirements for group navigation techniques, the differences between collocated and distributed settings, the scalability of group navigation, and the suitability of individual and group navigation for various scenarios. This thesis approaches these questions by introducing a general conceptual framework as well as the specification of central requirements for the design of group navigation techniques. The design, implementation, and evaluation of corresponding group navigation techniques demonstrate the applicability of the proposed framework. As a first step, this thesis presents ideas for the extension of the short-range teleportation metaphor, also termed jumping, for multiple users. It derives general quality requirements for the comprehensibility of the group jumping process and introduces a corresponding technique for two collocated users. The results of two user studies indicate that sickness symptoms are not affected by user roles during group jumping and confirm improved planning accuracy for the navigator, increased spatial awareness for the passenger, and reduced cognitive load for both user roles. Next, this thesis explores the design space of group navigation techniques in distributed virtual environments. It presents a conceptual framework to systematize the design decisions for group navigation techniques based on Tuckman's model of small-group development and introduces the idea of virtual formation adjustments as part of the navigation process. A quantitative user study demonstrates that the corresponding extension of Multi-Ray Jumping for distributed dyads leads to more efficient travel sequences and reduced workload. The results of a qualitative expert review confirm these findings and provide further insights regarding the complementarity of individual and group navigation in distributed virtual environments. Then, this thesis investigates the navigation of larger groups of distributed users in the context of guided museum tours and establishes three central requirements for (scalable) group navigation techniques. These should foster the awareness of ongoing navigation activities as well as facilitate the predictability of their consequences for all group members (Comprehensibility), assist the group with avoiding collisions in the virtual environment (Obstacle Avoidance), and support placing the group in a meaningful spatial formation for the joint observation and discussion of objects (View Optimization). The work suggests a new technique to address these requirements and reports on its evaluation in an initial usability study with groups of five to ten (partially simulated) users. The results indicate easy learnability for navigators and high comprehensibility for passengers. Moreover, they also provide valuable insights for the development of group navigation techniques for even larger groups. Finally, this thesis embeds the previous contributions in a comprehensive literature overview and emphasizes the need to study larger, more heterogeneous, and more diverse group compositions including the related social factors that affect group dynamics. In summary, the four major research contributions of this thesis are as follows: - the framing of group navigation as a specific instance of Tuckman's model of small-group development - the derivation of central requirements for effective group navigation techniques beyond common quality factors known from single-user navigation - the introduction of virtual formation adjustments during group navigation and their integration into concrete group navigation techniques - evidence that appropriate pre-travel information and virtual formation adjustments lead to more efficient travel sequences for groups and lower workloads for both navigators and passengers Overall, the research of this thesis confirms that group navigation techniques are a valuable addition to the portfolio of interaction techniques in multi-user virtual reality systems. The conceptual framework, the derived quality requirements, and the development of novel group navigation techniques provide effective guidance for application developers and inform future research in this area.}, subject = {Virtuelle Realit{\"a}t}, language = {en} }