@article{AreiasPintodaCostaRabczuketal.,
  author    = {Areias, Pedro and Pinto da Costa, A. and Rabczuk, Timon and Queiros de Melo, F. J. M. and Dias-da-Costa, D.},
  title     = {An alternative formulation for quasi-static frictional and cohesive contact problems},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {807 -- 824},
  abstract  = {An alternative formulation for quasi-static frictional and cohesive contact problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@misc{GarischKutznerOehleretal.,
  author    = {Garisch, Mathias and Kutzner, Eva and Oehler, Vanessa and Patzer, Nicole and Schmeing, Carolin},
  title     = {Analyse von Terminpl{\"a}nen},
  doi       = {10.25643/bauhaus-universitaet.2139},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140317-21392},
  pages     = {61},
  abstract  = {Das Bachelorprojekt „Analyse von Terminpl{\"a}nen" besch{\"a}ftigt sich mit der Analyse der Abh{\"a}ngigkeiten zwischen den unterschiedlichen Vorg{\"a}ngen des Bauablaufs. Die Problematik in der Terminplanerstellung liegt darin, dass ein Terminplan nicht alle Hintergrundinformationen abbildet und es daher zu Projektverz{\"o}gerungen und Absprachefehlern kommen kann. Dieses Bachelorprojekt macht Gebrauch von bereits aufbereiteten Informationen zur genannten Problematik in Form eines vorangegangen Bachelorprojekts und eines Masterprojekts, sowie einer Umfrage des Instituts f{\"u}r Bauwirtschaft der Universit{\"a}t Kassel. In diesem Projekt werden 50 neue und 100 bereits existierende Terminpl{\"a}ne von diversen Unternehmen aus ganz Deutschland analysiert und ausgewertet. Die Analyse der Terminpl{\"a}ne basiert auf gef{\"u}hrten Experteninterviews. Das Interview ber{\"u}cksichtigt Faktoren wie zum Beispiel Darstellungsformen, Detaillierungsgrade, Abh{\"a}ngigkeiten, Vorgangsdauern oder Planungsgrundlagen. Durch die Befragung von m{\"o}glichst vielen Firmen konnte festgestellt werden, dass jeder Terminplanentwickler eine Vorgehensweise entwickelt, nach welcher er arbeitet. Außerdem ist in den Gespr{\"a}chen deutlich geworden, dass das Theorie- Praxis-Gef{\"a}lle sehr groß ist. Das heißt, dass theoretische Modelle aus der Ausbildung an beispielsweise Hochschulen, in der Praxis heutzutage wenig angewandt werden. Nach der Analyse der Terminpl{\"a}ne und Auswertung der Interviews, werden die Daten in eine vom vorangehenden Masterprojekt erstellte Excel-Tabelle eingepflegt. Die vorhandenen Informationen werden dann anhand verschiedenster Diagramme verglichen und ausgewertet.},
  subject      = {Analyse},
  language  = {de}
}
@misc{Udrea,
  type      = {Master Thesis},
  author    = {Udrea, Mihai-Andrei},
  title     = {Assessment of Data from Dynamic Bridge Monitoring},
  doi       = {10.25643/bauhaus-universitaet.2174},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140429-21742},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {The focus of the thesis is to process measurements acquired from a continuous monitoring system at a railway bridge. Temperature, strain and ambient vibration records are analysed and two main directions of investigation are pursued. The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is studied and correlated to environmental and operational factors. The second aspect deals with the structural response to passing trains. Corresponding triggered records of strain and temperature are processed and their assessment is accomplished using the average strains induced by each train as the reference parameter. Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out.},
  subject      = {Messtechnik},
  language  = {en}
}
@article{MotraHildebrandDimmigOsburg,
  author    = {Motra, Hem Bahadur and Hildebrand, J{\"o}rg and Dimmig-Osburg, Andrea},
  title     = {Assessment of strain measurement techniques to characterise mechanical properties of structural steel},
  series = {Engineering Science and Technology, an International Journal},
  journal   = {Engineering Science and Technology, an International Journal},
  doi       = {10.1016/j.jestch.2014.07.006},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31540},
  pages     = {260 -- 269},
  abstract  = {Strain measurement is important in mechanical testing. A wide variety of techniques exists for measuring strain in the tensile test; namely the strain gauge, extensometer, stress and strain determined by machine crosshead motion, Geometric Moire technique, optical strain measurement techniques and others. Each technique has its own advantages and disadvantages. The purpose of this study is to quantitatively compare the strain measurement techniques. To carry out the tensile test experiments for S 235, sixty samples were cut from the web of the I-profile in longitudinal and transverse directions in four different dimensions. The geometry of samples are analysed by 3D scanner and vernier caliper. In addition, the strain values were determined by using strain gauge, extensometer and machine crosshead motion. Three techniques of strain measurement are compared in quantitative manner based on the calculation of mechanical properties (modulus of elasticity, yield strength, tensile strength, percentage elongation at maximum force) of structural steel. A statistical information was used for evaluating the results. It is seen that the extensometer and strain gauge provided reliable data, however the extensometer offers several advantages over the strain gauge and crosshead motion for testing structural steel in tension. Furthermore, estimation of measurement uncertainty is presented for the basic material parameters extracted through strain measurement.},
  subject      = {Baustahl},
  language  = {en}
}
@phdthesis{Dang,
  author    = {Dang, Trang},
  title     = {Automated Detailing of 4D Schedules},
  doi       = {10.25643/bauhaus-universitaet.2310},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141006-23103},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {120},
  abstract  = {The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30\% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization.},
  subject      = {Simulation},
  language  = {en}
}
@phdthesis{Wellnitz,
  author    = {Wellnitz, Felix},
  title     = {BAUKLIMATISCHE ERT{\"U}CHTIGUNG UND NACHHALTIGE INSTANDSETZUNG DENKMALGESCH{\"U}TZTER VERWALTUNGSBAUTEN DER 1950er JAHRE AM BEISPIEL DER EHEMALIGEN BAYERISCHEN LANDESVERTRETUNG VON SEP RUF IN BONN},
  doi       = {10.25643/bauhaus-universitaet.2303},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140919-23031},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {172},
  abstract  = {Viele Baudenkmale sind dem Konflikt aus baulichem Instandsetzungsbedarf f{\"u}r eine zeitgem{\"a}ße Nutzung und einer sich m{\"o}glicherweise daraus ergebenden Gef{\"a}hrdung der Denkmalsubstanz ausgesetzt. Gr{\"u}nde sind steigende Energiekosten f{\"u}r den Geb{\"a}udebetrieb, zeitgem{\"a}ße Anforderungen an Behaglichkeit und Arbeitsschutz, sowie die Vermeidung von Sch{\"a}den an der Substanz aufgrund baulicher M{\"a}ngel des konstruktiven W{\"a}rme- und Feuchteschutzes. Gleichzeitig gilt f{\"u}r viele Bauten aber auch die Notwendigkeit regelm{\"a}ßiger Nutzung und Bewirtschaftung, um den Erhalt {\"u}berhaupt zu sichern. Die energetische Ert{\"u}chtigung von Baudenkmalen scheitert in diesem Spannungsfeld oft am unl{\"o}sbaren Konflikt zwischen dem Erhalt der bauzeitlichen Substanz auf der einen und der notwendigen energetischen Optimierung der Geb{\"a}udeh{\"u}lle auf der anderen Seite. Zielsetzung dieser Fallstudie ist die beispielhafte Entwicklung einer bauklimatischen und denkmalgerechten Ert{\"u}chtigungsstrategie am Beispiel eines Verwaltungsgeb{\"a}udes der Nachkriegsmoderne als Beitrag zur L{\"o}sung dieses Konfliktes.},
  subject      = {Denkmalpflege},
  language  = {de}
}
@article{ZhaoLuRabczuk,
  author    = {Zhao, Jun-Hua and Lu, Lixin and Rabczuk, Timon},
  title     = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines},
  series = {The Journal of Chemical Physics},
  journal   = {The Journal of Chemical Physics},
  doi       = {10.1063/1.4878115},
  abstract  = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ChenSchwingKarlovšeketal.,
  author    = {Chen, Zhen and Schwing, Moritz and Karlovšek, Jurij and Wagner, Norman and Scheuermann, Alexander},
  title     = {Broadband Dielectric Measurement Methods for Soft Geomaterials: Coaxial Transmission Line Cell and Open-Ended Coaxial Probe},
  series = {International Journal of Engineering and Technology},
  volume    = {2014},
  journal   = {International Journal of Engineering and Technology},
  number    = {volume 6, number 5},
  doi       = {10.7763/IJET.2014.V6.728},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210408-43984},
  pages     = {373 -- 380},
  abstract  = {Broadband dielectric measurement methods based on vector network analyzer coupled with coaxial transmission line cell (CC) and open-ended coaxial probe (OC) are simply reviewed, by which the dielectric behaviors in the frequency range of 1 MHz to 3 GHz of two practical geomaterials are investigated. Kaolin after modified compaction with different water contents is measured by using CC. The results are consistent with previous study on standardized compacted kaolin and suggest that the dielectric properties at frequencies below 100 MHz are not only a function of water content but also functions of other soil state parameters including dry density. The hydration process of a commercial grout is monitored in real time by using OC. It is found that the time dependent dielectric properties can accurately reveal the different stages of the hydration process. These measurement results demonstrate the practicability of the introduced methods in determining dielectric properties of soft geomaterials.},
  subject      = {Impedanzspektroskopie},
  language  = {en}
}
@phdthesis{Wiedemeyer,
  author    = {Wiedemeyer, Nina},
  title     = {Buchfalten: Material Technik Gef{\"u}ge der K{\"u}nstlerb{\"u}cher},
  doi       = {10.25643/bauhaus-universitaet.2333},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141210-23337},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {215},
  abstract  = {B{\"u}cher werden nicht erst seit ihrer industriellen Produktion aus gefalzten Papierbogen zusammengesetzt - schon mittelalterliche Codices wurden aus gefalteten Pergamenth{\"a}uten konstruiert. Fokus dieser Studie {\"u}ber das Medium Buch ist daher die Kulturtechnik der Faltung. Anders als in der philosophischen Auseinandersetzung mit dem Begriff der Falte, ist die Buchfalte keine anti-lineare Figur, sondern ein operationales Falzscharnier, welches Anordnungen im Buchraum bestimmt und Ornamente hervorbringt. Mediengeschichtliche Fragestellungen sind auf Analysen von Buchmaterial und K{\"u}nstlerb{\"u}chern vom 19. Jahrhundert bis zur Gegenwart basiert. Mit den B{\"u}chern u.a. von Christian Boltanski, Hanne Darboven und Hans-Peter Feldmann werden Erkenntnisse {\"u}ber buchgeschichtliche Zusammenh{\"a}nge gewonnen und das K{\"u}nstlerbuch in eine Geschichte des Mediums Buch eingestellt.},
  subject      = {Buch; Buchkunst; Falte; Ornament; Papier},
  language  = {de}
}
@phdthesis{Wiedemeyer,
  author    = {Wiedemeyer, Nina},
  title     = {Buchfalten: Material Technik Gef{\"u}ge der K{\"u}nstlerb{\"u}cher},
  doi       = {10.25643/bauhaus-universitaet.2252},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140806-22527},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {215},
  abstract  = {B{\"u}cher werden nicht erst seit ihrer industriellen Produktion aus gefalzten Papierbogen zusammengesetzt - schon mittelalterliche Codices wurden aus gefalteten Pergamenth{\"a}uten konstruiert. Fokus dieser Studie {\"u}ber das Medium Buch ist daher die Kulturtechnik der Faltung. Anders als in der philosophischen Auseinandersetzung mit dem Begriff der Falte, ist die Buchfalte keine anti-lineare Figur, sondern ein operationales Falzscharnier, welches Anordnungen im Buchraum bestimmt und Ornamente hervorbringt. Mediengeschichtliche Fragestellungen sind auf Analysen von Buchmaterial und K{\"u}nstlerb{\"u}chern vom 19. Jahrhundert bis zur Gegenwart basiert. Mit den B{\"u}chern u.a. von Christian Boltanski, Hanne Darboven und Hans-Peter Feldmann werden Erkenntnisse {\"u}ber buchgeschichtliche Zusammenh{\"a}nge gewonnen und das K{\"u}nstlerbuch in eine Geschichte des Mediums Buch eingestellt.},
  subject      = {Papier},
  language  = {de}
}
@article{JoshiHildebrandAloraieretal.,
  author    = {Joshi, Suraj and Hildebrand, J{\"o}rg and Aloraier, Abdulkareem S. and Rabczuk, Timon},
  title     = {Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  doi       = {10.1016/j.commatsci.2012.11.029},
  pages     = {559 -- 565},
  abstract  = {This paper presents several aspects of characterization of welding heat source parameters in Goldak's double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40\% to 80\% in increments of 10\%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak's double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@misc{Kleiner,
  author    = {Kleiner, Florian},
  title     = {Charakterisierung des Einflusses der W{\"a}rmeleitf{\"a}higkeit von Kompositmaterialien auf die thermochemische W{\"a}rmespeicherung},
  doi       = {10.25643/bauhaus-universitaet.4496},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210921-44968},
  pages     = {86},
  abstract  = {Mit dem stetigen Steigen des Anteils an erneuerbaren Energien wird der Einsatz von Speichern immer bedeutsamer. Neben der Speicherung elektrischer Energie ist die Speicherung anfallender solarer bzw. industrieller W{\"a}rme eine wichtige Herausforderung. Aufgrund der hohen Energiespeicherdichte kommt dabei der thermochemischen W{\"a}rmespeicherung eine entscheidende Rolle zu. Eine Klasse dieser Speichermaterialien bilden Kompositmaterialien, die aus einer offenporigen Matrix und einem darin eingelagerten Salzhydrat bestehen. Ausschlaggebend f{\"u}r eine hohe Speicherdichte ist bei dieser Materialklasse der schnelle Abtransport der durch Wasserdampfsorption entstandenen W{\"a}rme. Das entscheidende Kriterium f{\"u}r eine Anwendung als Speichermaterial ist somit die W{\"a}rmeleitf{\"a}higkeit des Materials. Im Rahmen der Arbeit wurden deshalb die W{\"a}rmeleitf{\"a}higkeiten ausgew{\"a}hlter Salze (NaCl, MgSO4 und ZnSO4) mit verschiedenen Kristallwassergehalten, Tr{\"a}germaterialien wie Aktivkohle (Pellets und Pulver) und Zeolitpulver und an den daraus hergestellten Kompositmaterialien untersucht. Ziel war es außerdem Aussagen zu einer g{\"u}nstigen Materialkombination aus offenporigem Tr{\"a}germaterial und Salzhydrat sowie eines geeigneten Porenf{\"u}llgrades zu treffen und Ans{\"a}tze f{\"u}r die Modellierung der W{\"a}rmeleitf{\"a}higkeit der Komposite zu liefern.},
  subject      = {W{\"a}rmespeicher},
  language  = {de}
}
@article{ZhaoJiangWangetal.,
  author    = {Zhao, Jiyun and Jiang, Jin-Wu and Wang, L. and Guo, Wanlin and Rabczuk, Timon},
  title     = {Coarse-grained potentials of single-walled carbon nanotubes},
  series = {Journal of the Mechanics and Physics of Solids},
  journal   = {Journal of the Mechanics and Physics of Solids},
  abstract  = {Coarse-grained potentials of single-walled carbon nanotubes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{KoenigKnecht,
  author    = {K{\"o}nig, Reinhard and Knecht, Katja},
  title     = {Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision},
  series = {Artificial Intelligence for Engineering Design, Analysis and Manufacturing},
  journal   = {Artificial Intelligence for Engineering Design, Analysis and Manufacturing},
  pages     = {285 -- 299},
  abstract  = {We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties.},
  subject      = {Architektur},
  language  = {en}
}
@article{AtaollahiOshkourTalebiSeyedShirazietal.,
  author    = {Ataollahi Oshkour, Azim and Talebi, Hossein and Seyed Shirazi, Seyed Farid and Bayat, Mehdi and Yau, Yat Huang and Tarlochan, Faris and Abu Osman, Noor Azuan},
  title     = {Comparison of various functionally graded femoral prostheses by finite element analysis},
  series = {Scientific World Journal},
  journal   = {Scientific World Journal},
  doi       = {10.1155/2014/807621},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31194},
  abstract  = {This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{Massaretti,
  author    = {Massaretti, Pier Giorgio},
  title     = {Dagli inizi dell'urbanismo teorico alla citt{\`a} moderna. Visioni urbanistiche del totalitarismo - Italia},
  series = {Anthologie zum St{\"a}dtebau. Das Ph{\"a}nomen Großstadt und die Entstehung der Stadt der Moderne},
  journal   = {Anthologie zum St{\"a}dtebau. Das Ph{\"a}nomen Großstadt und die Entstehung der Stadt der Moderne},
  doi       = {10.25643/bauhaus-universitaet.3222},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170529-32228},
  pages     = {1 -- 45},
  abstract  = {La prima edizione di questo testo {\`e} apparsa, in tedesco, nel volume II.2.: Anthologie zum St{\"a}dtebau. Das Ph{\"a}nomen Großstadt und die Entstehung der Stadt der Moderne, a cura di Vittorio Magnago Lampugnani, Katia Frey, Eliana Perotti, con il sostegno di Departement Architektur der Eidgen{\"o}ssischen Technischen Hochschule, Z{\"u}rich (Gebr. Mann Verlag, Berlin 2014, pp. 1307-1390). Previ specifici accordi con l'editore, viene qui presentata la versione originaria, in italiano, dell'intero capitolo: Modernit{\"a}t und Emphase. St{\"a}dtebau im italienischen Faschismus, e comprendente: i) una capiente saggio introduttivo - in una versione pi{\`u} ampia ed articolata (comprensiva della "Bibliografia sistematica", di riferimento) del testo in tedesco; ii) la versione in italiano del repertorio antologico di riferimento - e comprensiva di una "Scheda introduttiva", sull'Autore-Opera, e di una selezione del testo in esame.},
  subject      = {St{\"a}dtebau},
  language  = {it}
}
@phdthesis{Faschingeder,
  author    = {Faschingeder, Kristian},
  title     = {Das Unheimliche in der Stadt. Die urbane Vision Ludwig Hilberseimers},
  doi       = {10.25643/bauhaus-universitaet.2133},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140226-21333},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {454},
  abstract  = {Ausgangspunkt der Arbeit ist der Aspekt des Unheimlichen in jener Hochhausstadt, deren Entwurf Ludwig Hilberseimer 1924 zum ersten Mal publizierte und die sp{\"a}ter zum Synonym f{\"u}r die Aberrationen modernistischen St{\"a}dtebaus wurde. Daraus geht die Forschungsfrage hervor, wie der Eindruck des Unheimlichen evoziert wird und an welchen Elementen des Entwurfs und/oder der Darstellung dieser festgemacht werden kann. Hier geht es nicht um eine Analyse der Intentionen des Autors der Hochhausstadt, der diese ja als Verbesserung zu den herrschenden Wohnverh{\"a}ltnissen anpries; stattdessen wird eine Reihe von unterschiedlichen interpretatorischen Ans{\"a}tzen gew{\"a}hlt (von Nelson Goodmans Theorie der Notation {\"u}ber Norman Brysons visuelles Zeichensystem bis hin zu Adornos Negativer Dialektik; von der „Bildwissenschaft" bis hin zur „visual theory"). In diesem Zusammenhang werden schließlich auch jene Divergenzen herausgearbeitet, die zwischen der Architektur der Moderne und der Kunst der Avantgarde herrschten. Da aufgrund der Frage nach der Bildwirkung der beiden Perspektiven der Hochhausstadt die {\"A}sthetik des Erhabenen eine besondere Rolle spielt, reicht der Fokus der Arbeit bis in den kunst- und architekturtheoretischen Diskurs des 18. Jahrhundert zur{\"u}ck. Zuletzt m{\"u}ndet die Arbeit in eine Diskussion von Interpretation selbst und der M{\"o}glichkeit einer kritischen Architekturtheorie.},
  subject      = {Architekturtheorie},
  language  = {de}
}
@phdthesis{Buchwald,
  author    = {Buchwald, Anja},
  title     = {Der Einfluss des Kalziums auf die Kondensation von (Alumo-)Silikaten in alkali-aktivierten Bindern},
  doi       = {10.25643/bauhaus-universitaet.2104},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140124-21046},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {35},
  abstract  = {Es werden geopolymere und alkali-aktivierte Bindemittel definiert und ihre prinzipiellen technischen und {\"o}kologischen Eigenschaften diskutiert.},
  subject      = {Bindemittel},
  language  = {de}
}
@article{NanthakumarLahmerRabczuk,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {98 -- 112},
  abstract  = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Nayono,
  author    = {Nayono, Suwartanti},
  title     = {Development of a Sustainability-based Sanitation Planning Tool (SusTA) for Developing Countries},
  doi       = {10.25643/bauhaus-universitaet.2222},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140619-22227},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {153; mit Anh{\"a}ngen 209},
  abstract  = {Background and Research Goal Despite all the efforts in the sanitation sector, it is acknowledged that the world is not on track to meet the MDG sanitation target to reduce the number of people without access to sanitation by 2015. Furthermore, a large number of existing sanitation facilities in developing countries is out of order. This leads to the conclusion that, besides technical failures, the planning process in the sanitation sector was ineffective. This ineffectiveness may be attributed to the lack of knowledge of the sanitation planners about the local conditions of the sanitation project. In addition, sustainability of a technology is often approached from a fragmented perspective that often leads to an unsustainable solution. The dissertation is conducted within the framework of the Integrated Water Resources Management (IWRM) Indonesia project. The goal of this work is to contribute to the development of a methodology of a planning tool for sustainable sanitation technology. The tool is designed for sanitation planners in developing countries, where a top-down planning approach is common practice. The proposed tool enables comprehensive sustainability assessments (using the Helmholtz Concept of Sustainability as reference), taking into account local conditions. State of the Science In the planning practice, many sanitation planning tools focus on technology selection. However, it has become evident that the selection criteria for sustainable technologies are not always considered in the tools' framework. In other cases, when the criteria are provided by the tool, there is no clear indication of the conditions to be fulfilled in order to meet these criteria. Specifically, there is no reference to what is meant by sustainable technology in a particular context and how to comprehensively assess the sustainability of different technology options. Research Methodology Developing a planning tool is an empirical process, combining theory and practical experience. Hence, the development process of such a tool requires extensive observations, particularly on the interaction between stakeholders in the sanitation sector as well as between technology and its environment. For this purpose, a case study within the project area was carried out. Pucanganom, a village representing common strategic problems in developing countries (e.g. top-down planning approaches, lack of involvement of beneficiaries in the planning process, lack of sustainability assessments) was finally selected as the case study area. After the in-depth case study, an analytical generalisation was developed to enable the tool's application to a broader context. Results The result of this research is a new tool - the Sustainability-based Sanitation Planning Tool (SusTA). SusTA enables comprehensive sustainability assessment in its five generic steps, namely: (1) analysis of stakeholders and sanitation policy in the region, (2) distance-to-target analysis on sanitation conditions in the region, (3) examination of physical and socio-economic conditions in the project area, (4) contextualisation of the technology assessment process in the project area, and (5) sustainability-oriented technology assessment at the project level. These steps are conducted at two levels of planning - the region and the project area - in order to identify the specific problems and interests which influence the selection of a sanitation system. Each planning step is equipped with tool elements (e.g. set of indicators, household questionnaires, technology assessment matrices) to support the analysis. From the development of SusTA, it can be concluded that four elements are required for an effective and widely applicable sanitation planning tool: sustainability concept, participatory approach, contextualisation framework and modification framework. SusTA provides both a theoretical and a practical basis for assessing the sustainability of sanitation technologies in developing countries. The tool's main advantages for decision makers in these countries are: It is simple and transparent in its steps, does not require vast amounts of data and does not need a sophisticated computer program.},
  subject      = {sanitation planning, sustainable technology, sustainability assessment},
  language  = {en}
}