@article{KaklauskasCervenkaCervenka2004,
  author    = {Kaklauskas, Gintaris and Cervenka, Vladimir and Cervenka, Jan},
  title     = {Deflection Calculation of RC Beams: Finite Element Software versus Design Code Methods},
  doi       = {10.25643/bauhaus-universitaet.249},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2498},
  year      = {2004},
  abstract  = {The paper investigates accuracy of deflection predictions made by the finite element package ATENA and design code methods ACI and EC2. Deflections have been calculated for a large number of experimental reinforced concrete beams reported by three investigators. Statistical parameters have been established for each of the technique at different load levels, separately for the beams with small and moderate reinforcement ratio.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{PickHeimsundMilbradt2004,
  author    = {Pick, Tobias and Heimsund, Bjoern-Ove and Milbradt, Peter},
  title     = {Development and Analysis of Sparse Matrix Concepts for Finite Element Approximation on general Cells},
  doi       = {10.25643/bauhaus-universitaet.250},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2500},
  year      = {2004},
  abstract  = {In engineering and computing, the finite element approximation is one of the most well-known computational solution techniques. It is a great tool to find solutions for mechanic, fluid mechanic and ecological problems. Whoever works with the finite element method will need to solve a large system of linear equations. There are different ways to find a solution. One way is to use a matrix decomposition technique such as LU or QR. The other possibility is to use an iterative solution algorithm like Conjugate Gradients, Gauß-Seidel, Multigrid Methods, etc. This paper will focus on iterative solvers and the needed storage techniques...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MotawaAnumbaElHamalawi2004,
  author    = {Motawa, Ibrahim and Anumba, Chimay and El-Hamalawi, A.},
  title     = {Development of a Fuzzy System for Change Prediction in Construction Projects},
  doi       = {10.25643/bauhaus-universitaet.218},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2180},
  year      = {2004},
  abstract  = {Change management has been the focus of different IT systems. These IT systems were developed to represent design information, record design rationale, facilitate design coordination and changes. They are largely based on managing reactive changes, particularly design changes, in which changes are recorded and then propagated to the relevant project members. However, proactive changes are hardly dealt with in IT systems. Proactive changes require estimating the likelihood of occurrence of a change event as well as estimating the degree of change impacts on project parameters. Changes in construction projects often result from the uncertainty associated with the imprecise and vague knowledge of much project information at the early stages of projects. This is a major outcome of the case studies carried out as part of this research. Therefore, the proposed model considers that incomplete knowledge and certain project characteristics are always behind change causes. For proactive changes, predicting a change event is the main task for modelling. The prediction model should strive to integrate these main elements: 1) project characteristics that lead to change 2) causes of change, 3) the likelihood of change occurrence, and 4) the change consequences. It should also define the dependency relationships between these elements. However, limited data (documented) are only available from previous projects for change cases and many of the above elements can only be expressed in linguistic terms. This means that the model will simulate the uncertainty and subjectivity associated with these sets of elements. Therefore, a fuzzy model is proposed in this research to capture these elements. The model analyses the impact of each set of elements on the other by assigning fuzzy values for these elements that express the uncertainty and subjectivity of their impact. The main aim is to predict change events and evaluate change effects on project parameters. The fuzzy model described above was developed in an IT system for operational purposes and was designed as a Java package of components with their supporting classes, beans, and files. This paper describes the development and the architecture of the proposed IT system to achieve these requirements. The system is intended to help project teams in dealing with change causes and then the change consequences in construction projects.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{MonobeTanakaFuruta2004,
  author    = {Monobe, Kantaro and Tanaka, Shigenori and Furuta, Hitoshi},
  title     = {Development of a System for Making Guide Maps based on the Idea of the Cognitive Map},
  doi       = {10.25643/bauhaus-universitaet.268},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2688},
  year      = {2004},
  abstract  = {Digital maps are very easily applied as route guide maps. Route guide maps are provided through Web or a mobile phone services, and demand for such services is increasing. However, the production of a route guide map requires a great deal of time. Therefore, it is difficult for general users to make route guide maps. The purpose of the present research is the development of a system that can generate a route guide map using the Digital Map 2500 (Spatial Data Framework) published by the Geographical Survey Institute. This system will not require advanced equipment or expert knowledge. Therefore, anyone can produce route guide maps easily and quickly. By using the Digital Map 2500, the time and cost required in order to generate a map are reduced. Moreover, a useful route guide map can be created by simplifying the map form based on the human cognitive map.},
  subject      = {Geoinformationssystem},
  language  = {en}
}
@article{KoikeMorimotoNomura2004,
  author    = {Koike, Hirotaka and Morimoto, Akinori and Nomura, Kazuhiro},
  title     = {Development of Urban Land Use Model to Compare Transit-Oriented and Automobile-Oriented Cities},
  doi       = {10.25643/bauhaus-universitaet.262},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2621},
  year      = {2004},
  abstract  = {This study is an attempt to develop a simple simulation model that can compare the differences between automobile-oriented and transit-oriented cities, and clarify the difference between city forms by transportation modes. Following a theoretical model development, a series of simulation runs are tried. The model allocates people who commute to CBD from residential zones along a transportation corridor. As a result of many simulation analyses, it is shown that automobiles need much more traffic space in comparison with the transit as is shown by the proposed traffic space ratio both in CBD and along the corridor.},
  subject      = {Verkehrsplanung},
  language  = {en}
}
@article{KicingerArciszewskiDeJong2004,
  author    = {Kicinger, Rafal and Arciszewski, Tomasz and De Jong, Kenneth},
  title     = {Distributed Evolutionary Design: Island-Model-based Optimization of Steel Skeleton Structures in Tall Buildings},
  doi       = {10.25643/bauhaus-universitaet.219},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2195},
  year      = {2004},
  abstract  = {This paper presents results of a study on distributed, or parallel, evolutionary computation in the topological design of steel structural systems in tall buildings. It describes results of extensive experimental research on various parallel evolutionary architectures applied to a complex structural design problem. The experiments were conducted using Inventor 2003, a networkbased evolutionary design support tool developed at George Mason University. First, a general introduction to evolutionary computation is provided with an emphasis on recent developments in parallel evolutionary architectures. Next, a discussion of conceptual design of steel structural systems in tall buildings is presented. Further, Inventor 2003 is briefly introduced as well as its design representation and evolutionary computation characteristics. Next, the results obtained from systematic design experiments conducted with Inventor 2003 are discussed. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems in tall buildings during a distributed evolutionary design process as well as to compare efficiency and effectiveness of various parallel evolutionary architectures with the traditional evolutionary design approaches. Two connectivity topologies (ring topology and fully-connected topology) have been investigated for four populations of structural designs evolving in parallel and using various migration strategies. Also, results of the initial sensitivity studies are reported in which two ways of initializing distributed evolutionary design processes were investigated, using either arbitrarily selected designs as initial parents or randomly generated ones. Finally, initial research conclusions are presented.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{SemenovBazhanMorozov2004,
  author    = {Semenov, Vitaly and Bazhan, Andrew and Morozov, Sergey},
  title     = {Distributed STEP-Compliant Platform for Multimodal Collaboration in Architecture, Engineering, and Construction},
  doi       = {10.25643/bauhaus-universitaet.261},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2616},
  year      = {2004},
  abstract  = {This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction.},
  subject      = {Framework <Informatik>},
  language  = {en}
}
@article{MostBucherSchorling,
  author    = {Most, Thomas and Bucher, Christian and Schorling, York},
  title     = {Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading},
  series = {Journal of Sound and Vibration},
  journal   = {Journal of Sound and Vibration},
  pages     = {381 -- 400},
  abstract  = {Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{BargstaedtBlickling2004,
  author    = {Bargst{\"a}dt, Hans-Joachim and Blickling, Arno},
  title     = {Effective cost estimate and construction processes with 3D interactive technologies: Towards a virtual world of construction sites},
  doi       = {10.25643/bauhaus-universitaet.232},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2320},
  year      = {2004},
  abstract  = {The development of 3D technologies during the last decades in many different areas, leads us towards the complete 3D representation of planet earth on a high level of detail. On the lowest level we have geographical information systems (GIS) representing the outer layer of our planet as a 3D model. In the meantime these systems do not only give a geographical model but also present additional information like ownership, infrastructure and others that might be of interest for the construction business. In future these systems will serve as basis for virtual environments for planning and simulation of construction sites. In addition to this work is done on the integration of GIS systems with 3D city models in the area of urban planning and thus integration of different levels of detail. This article presents research work on the use of 3D models in construction on the next level of detail below the level of urban planning. The 3D city model is taken as basis for the 3D model of the construction site. In this virtual nD-world a contractor can organize and plan his resources, simulate different variants of construction processes and thus find out the most effective solution for the consideration of costs and time. On the basis of former researches the authors present a new approach for cost estimation and simulation using development technologies from game software.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KwakKim2004,
  author    = {Kwak, Hyo-Gyoung and Kim, Jin-Kook},
  title     = {Efficient Shoring System in RC Frame Structures},
  doi       = {10.25643/bauhaus-universitaet.251},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2511},
  year      = {2004},
  abstract  = {In this paper, systematic analyses for the shoring systems installed to support the applied loads during construction are performed on the basis of the numerical approach. On the basis of a rigorous time-dependent analysis, structural behaviors of reinforced concrete (RC) frame structures according to the changes in design variables such as the types of shoring systems, shore stiffness and shore spacing are analyzed and discussed. The time-dependent deformations of concrete such as creep and shrinkage and construction sequences of frame structures are also taken into account to minimize the structural instability and to reach to an improved design of shoring system because these effects may increase the axial forces delivered to the shores. In advance, the influence of the column shortening effect, generally mentioned in a tall building structure, is analyzed. From many parametric studies, it has been finally concluded that the most effective shoring system in RC frame structures is 2S1R (two shores and one reshore) regardless of the changes in design variables.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{Abdalla2004,
  author    = {Abdalla, Jamal},
  title     = {Elements of an Agent-based Mediative Communication Protocol for Design Objects},
  doi       = {10.25643/bauhaus-universitaet.220},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2207},
  year      = {2004},
  abstract  = {Integrated structural engineering system usually consists of large number of design objects that may be distributed across different platforms. These design objects need to communicate data and information among each other. For efficient communication among design objects a common communication protocol need to be defined. This paper presents the elements of a communication protocol that uses a mediator agent to facilitate communication among design objects. This protocol is termed the Mediative Communication Protocol (MCP). The protocol uses certain design communication performatives and the semantics of an Agent Communication language (ACL) mainly the Knowledge and Query Manipulation Language (KQML) to implement its steps. Details of a Mediator Agent, that will facilitate the communication among design objects, is presented. The Unified Modeling Language (UML) is used to present the Meditative protocol and show how the mediator agent can be use to execute the steps of the meditative communication protocol. An example from structural engineering application is presented to demonstrate and validate the protocol. It is concluded that the meditative protocol is a viable protocol to facilitate object-to-object communication and also has potential to facilitate communication among the different project participants at the higher level of integrated structural engineering systems.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{StaubFrench2004,
  author    = {Staub-French, Sheryl},
  title     = {Feature-based Product Modeling for Building Construction},
  doi       = {10.25643/bauhaus-universitaet.233},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2331},
  year      = {2004},
  abstract  = {Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{MilbradtSchierbaumSchwoeppe2004,
  author    = {Milbradt, Peter and Schierbaum, Jochen and Schw{\"o}ppe, Axel},
  title     = {Finite Cell-Elements of Higher Order},
  doi       = {10.25643/bauhaus-universitaet.252},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2524},
  year      = {2004},
  abstract  = {The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{WeiseKatranuschkovScherer2004,
  author    = {Weise, Matthias and Katranuschkov, Peter and Scherer, Raimar J.},
  title     = {Generic Services for the Support of Evolving Building Model Data},
  doi       = {10.25643/bauhaus-universitaet.207},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2077},
  year      = {2004},
  abstract  = {Many problems related to data integration in AEC can be better tackled by an approach that takes into account the heterogeneity of tasks, models and applications but does not require continuous consistency of the evolving design data, at each data management operation. Such an approach must incorporate adequate services that can facilitate reintegration of concurrently modified data at reasonably selected coordination points. In this paper we present a set of methods which, used in combination, can achieve that goal. After a description of the principal envisaged cooperative work scenario each of these methods is discussed in detail and current observations drawn from their software realisation are given. Whilst the suggested approach is valid for any EXPRESS-based data model, the practical focus of work has been on facilitating IFC-driven integration.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{Makanae2004,
  author    = {Makanae, Koji},
  title     = {Highway Sequence Editor based on the Length-based Highway Product Model},
  doi       = {10.25643/bauhaus-universitaet.234},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2347},
  year      = {2004},
  abstract  = {The highway product model based on the length information of the centerline, and the application system is developed. This paper shows the schema and the modeling process of the product model, which includes geometric elements such as an alignment, lanes, sidewalks, shoulders and sprits, and accessories such as guard fences, plantings and signs. Furthermore, The Highway Sequence Editor (HSE) is developed as an application system to verify the model.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{GeibigSchnellenbachHeld2004,
  author    = {Geibig, Oliver and Schnellenbach-Held, Martina},
  title     = {Implementation of an Agent-based Bidding Consortium in the Architecture of an Agent-based Virtual Marketplace},
  doi       = {10.25643/bauhaus-universitaet.221},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2214},
  year      = {2004},
  abstract  = {In this research project we intend to transfer the whole AEC-Bidding process to an agent-based virtual marketplace. Hereby, the existing legal regulations have to be considered. Important aspects in developing the virtual marketplace are to provide the possibility to realize an agentbased bidding consortium as well as to integrate subcontractors.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{NeubergFankEkkerlein2004,
  author    = {Neuberg, Frank and Fank, Ernst and Ekkerlein, Christian},
  title     = {Integrated Life Cycle Simulation and Assessment of Buildings},
  doi       = {10.25643/bauhaus-universitaet.235},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2351},
  year      = {2004},
  abstract  = {Buildings require both for construction and, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. So far available knowledge about resource consumption during an entire life cycle of a building is still quite rare, because various criteria affect each other and/or overlay mutually. In this contribution a model based software concept is presented using an integrated approach for life cycle simulation and assessment of buildings. The essential point of the development consists of connecting an IFC compliant product model of a building via the Internet with data bases for the resource and energy requirement of building materials. Furthermore, numerical simulations allow calculating and minimizing the energy consumption, the resource requirement, the waste streams and also the noxious emissions. In the context of this paper we present the first release of software programs for architects and engineers, which help them to evaluate their design decisions objectively in early planning steps. Additionally the usage of the software is demonstrated by a test case study for a real world building. By applying this software in practice a substantial contribution for saving energy and natural resources can be provided in the sense of sustainable and ecological building design.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{WillenbacherHuebler2004,
  author    = {Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {Intelligent Link-Management for the Support of Integration in Building Life Cycle},
  doi       = {10.25643/bauhaus-universitaet.222},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2223},
  year      = {2004},
  abstract  = {The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its "intelligent" link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{KraftWilhelms2004,
  author    = {Kraft, Bodo and Wilhelms, Nils},
  title     = {Interactive Distributed Knowledge Support for Conceptual Building Design},
  doi       = {10.25643/bauhaus-universitaet.209},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2094},
  year      = {2004},
  abstract  = {In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual design. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the industrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is ensured by the constraint checker, another extension to ArchiCAD.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{SchnellenbachHeldHartmann2004,
  author    = {Schnellenbach-Held, Martina and Hartmann, Markus},
  title     = {Knowledge Based Systems in Distributed Desgin Environments},
  doi       = {10.25643/bauhaus-universitaet.210},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2106},
  year      = {2004},
  abstract  = {Today's building industry not only demands more and more reduced construction time on building site, but also an advanced and mostly construction attendant design phase. Even though there is software available to support design processes in distributed environments, most applications only support simple document based exchange of information. In this paper a knowledge based system is presented to support cooperative, comprehensive design processes in distributed environments. The presented research project is financially supported by the German Research Community (DFG - Deutsche Forschungsgemeinschaft).},
  subject      = {Produktmodell},
  language  = {en}
}