@article{SmarslyHartmannRueppeletal.,
  author    = {Smarsly, Kay and Hartmann, Timo and R{\"u}ppel, Uwe and K{\"o}nig, Markus},
  title     = {Positionspapier des Arbeitskreis Bauinformatik},
  editor    = {Smarsly, Kay},
  doi       = {10.25643/bauhaus-universitaet.3221},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170523-32219},
  pages     = {5},
  abstract  = {Die Bauinformatik ist eine S{\"a}ule der modernen Bau- und Umweltingenieurwissenschaften und befasst sich mit der Erforschung grundlegender informatorischer Methoden sowie mit der Anwendung und Weiterentwicklung der Informationswissenschaften im Bau- und Umweltbereich. Der Arbeitskreis Bauinformatik konstituiert sich aus Wissenschaftlern, die an Universit{\"a}ten im deutschsprachigen Raum auf dem Fachgebiet Bauinformatik lehren und forschen. Ausgehend vom erreichten Entwicklungsstand der Bauinformatik skizziert dieses Positionspapier die Aufgaben des Arbeitskreises und formuliert eine Grundlage f{\"u}r eine abgestimmte Weiterentwicklung an den deutschsprachigen Universit{\"a}ten.},
  subject      = {Bauinformatik},
  language  = {de}
}
@article{SchneiderBeucke1997,
  author    = {Schneider, Ulrich and Beucke, Karl},
  title     = {Standardisierung der Kommunikation als Integrationsansatz f{\"u}r das Bauwesen},
  doi       = {10.25643/bauhaus-universitaet.548},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5483},
  year      = {1997},
  abstract  = {Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenw{\"a}rtig die Realisierung des durchg{\"a}ngigen, fach{\"u}bergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsf{\"a}higkeit der deutschen Bauwirtschaft ist es unumg{\"a}nglich, vorhandene Effizienzpotentiale in der Bauplanung auszusch{\"o}pfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden k{\"o}nnen. Nach dem gegenw{\"a}rtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchg{\"a}ngig nutzbar sind. Diese werden in einem allgemeing{\"u}ltigen Format den speziellen Programmen der Fachplaner zur Verf{\"u}gung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu {\"u}bertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erf{\"u}llen m{\"u}ssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unver{\"a}nderter Weise erfolgen.},
  subject      = {Bauwesen},
  language  = {de}
}
@article{EirinhevskyDikhnyakEirichevskyetal.1997,
  author    = {{\^E}irinhevsky, V. V. and D{\^i}khnyak, B. M. and {\^E}irichevsky, R. V. and {\^E}{\^i}zub, Y. G.},
  title     = {Determination of the Temperature of Dissipative Warming and Parameters of Fracture in Elastomers with using of Singular Finite Elements},
  doi       = {10.25643/bauhaus-universitaet.547},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5471},
  year      = {1997},
  abstract  = {For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated.},
  subject      = {Elastomer},
  language  = {en}
}
@article{SchulzKirschkeSchatter1997,
  author    = {Schulz, Thomas and Kirschke, Heiko and Schatter, G.},
  title     = {Das Internet als Basis f{\"u}r die Produktinformation im Bauwesen},
  doi       = {10.25643/bauhaus-universitaet.546},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5468},
  year      = {1997},
  abstract  = {Die Gesamtheit der Produktinformationen im Bauwesen stellt sich als sehr inkonsistente und redundante Informationsmenge dar. Die Hersteller stehen vor der Aufgabe, diese Produktinformationen nicht nur in der {\"u}blichen Katalogform sondern auch in neuen Medien wie CD-ROM und WWW zu publizieren. Einmal betriebener Erfassungsaufwand muß sich dabei durch eine einfache Mehrfachverwendung der Daten rentieren. Wegen seiner technologischen Eigenschaften eignet sich das WWW sehr gut als prim{\"a}re Quelle f{\"u}r Produktinformationen. Vor allem wegen der m{\"o}glichen Aktualit{\"a}t sollte es Grundlage f{\"u}r Publikationen in den anderen Medien sein. Mit verh{\"a}ltnism{\"a}ßig geringem Aufwand lassen sich die WWW-Pr{\"a}sentation von Produktdaten so strukturieren, daß eine automatisierte Erfassung und Verarbeitung dieser Daten vereinfacht wird. So kann die Datenkonsistenz von der visuellen Pr{\"a}sentation in herk{\"o}mmlichen Katalogen bis zur automatisch erstellten Produktdatenbank durchg{\"a}ngig gesichert werden. Vor dem Hintergrund der von Schnittstellenproblemen, heterogener Softwarestruktur und unzureichender Ausnutzung der M{\"o}glichkeiten der Informatik gekennzeichneten Situation im Bauwesen wird in generalisierter Ansatz mittels SGML vorgestellt. Mit einem derartigen Datenangebot werden neue, verteilte und vernetzte Anwendungen auf Grundlage derselben Produktdaten erm{\"o}glicht.},
  subject      = {Bauwesen},
  language  = {de}
}
@article{KochkarovPopovaZinchenko1997,
  author    = {Kochkarov, A. M. and Popova, E. V. and Zinchenko, O. A.},
  title     = {Multicriteria problems of regulation when planning building processes},
  doi       = {10.25643/bauhaus-universitaet.545},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5454},
  year      = {1997},
  abstract  = {In the rpocess of project construction organization under conditions of limited resources the problem of investor arises, which in onecriteria setting is as follows N invsted projects reindexed i=1,2,...,n are considered, initial parameters of the problem are:- duraion of iproject construction, - expected profit per unit of time from i project after putting it info operation ,-the time fixed , after the expiry of it a fine is paid for each overdued unit of time units in number. The investor resources are limited, i.e., at every moment of time investor can provid delivering of necessary resources only for one project .Any admissible problem decision of investor represents one of n! permutation of of numbers 1,2,..,n. X={x}-is the set of all admissible solutions (SAS) of this problem . In works of different authors the quality of decision is evaluated either by objective function (OF) of the type MINSUM where,by the objective function of the of the type MINMAX},
  language  = {en}
}
@article{Routmann1997,
  author    = {Routmann, Y. L.},
  title     = {Pseudorigidity method for solving the problem of limit equilibrium of rigid-plastic constructions},
  doi       = {10.25643/bauhaus-universitaet.544},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5447},
  year      = {1997},
  abstract  = {1.Design calculations , based upon the theory elasticity , cannot completely satisfy engineers and designers , because cannot answer to basic question about overload capability . Only design calculations of limit equilibrium of rigid-plastic constructions can answer to this question completely enough. As a rule , such design calculations are made issue from hypothesis, that material of construction has rigid-plastic diagram Prandtl .This scheme of calculation gives qualitatively more correct results, then usual calculation, based upon law Hooke's , and allows more really estimate ultimate strength of construction due to different loads. Universal algorithms for solving the problem of limit equilibrium have been created since the middle of the 60's.These algorithms are based upon two basic theorems about limit analysis - static and kinetics. It was found , that with the help of above-mentioned theorems the problem of limit equilibrium can be formulated as a problem of linear programming (for linear yield) or nonlinear programming (for yield Guber-Mizes). The method of linear programming conformably to calculation of rod systems got the most development in the reports Prager W. [1] and Chiras A. [ 2 ]. The method of linear programming conformably to plates and shells was widely used by Rganizin A.[3]. [3[ contains more full bibliography about this problem. Calculation of limit equilibrium with the help of linear and nonlinear programming has a few significant lacks: - complexity and laboriousness preliminary preparation of problem for PC; - necessity to use special program means , which are not in usual program packet for strength analysis. Author worked out a new method about design calculation of limit equilibrium without above-mentioned lacks . The method is based upon analogy of relations between internal generalized efforts and generalized deformations in elastic system and between generalized efforts and velocities of change generalized deformations in rigid-plastic system. Because later rigid-plastic deformation would be treated as an elastic deformation in the system with special constructed rigidities , this method could be called >pseudorigidity method<.},
  subject      = {Plastizit{\"a}tstheorie},
  language  = {en}
}
@article{SalpagarovaTemirbulatov1997,
  author    = {Salpagarova, A. A. and Temirbulatov, P. I.},
  title     = {On one systemic Development of the Problem of Allocation},
  doi       = {10.25643/bauhaus-universitaet.543},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5431},
  year      = {1997},
  abstract  = {Problem of discretic programming in conditions of manycriterial is considered. Set of work, being subject to fulfilment, is available. Are certain also: set of the executors; set, machines; set of resources (materials, semifinished items and etc.) and other set. As a functional complex name set, which will be formed, when on one representative of each of the specified sets is nominated to one working place. The allowable decision of a examined problem represents set of not crossed complexes provided that, for each working place one functional complex is certain in the accuracy. The elementary case of a formulated above problem is known under the name >a problem about purposes< [1], when the complex is defined as a pair >an executor - working place<. In case of three-element complexes we come to a problem about three-combinations. In a general case the complex consists from m of elements and the problem of formation of m-element complexes is formulated on the m-colour column.},
  subject      = {Entscheidung bei mehrfacher Zielsetzung},
  language  = {en}
}
@article{PiskunovMarchuk1997,
  author    = {Piskunov, V. G. and Marchuk, A. V.},
  title     = {Model of stressed-strained State of Multilayer Masses with regard for Non-Ideal Contact of Layers},
  doi       = {10.25643/bauhaus-universitaet.542},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5427},
  year      = {1997},
  abstract  = {Thus, mathematical model stressed- strained of a condition of layered masses is constructed. The model has high accuracy. It allows to simulate slippery contact of layers without friction. Thus not the order of permitting system of the equations is increased, and at its realization the method of fenite elements does not increase quantity of required degrees freedom. The differential operators included in system the equations are similar known in the classical theory of shells. It facilitates construction of a finite element. Presence in system of the differential equations of derivative of external forces allows to use her for the decision of contact problems with a stain of contact commensurable with thickness of a masses.},
  subject      = {Geschichtetes Medium},
  language  = {en}
}
@article{Lizounov1997,
  author    = {Lizounov, P. P.},
  title     = {Dynamics of solid and deformable Bodies Systems at complex Movements},
  doi       = {10.25643/bauhaus-universitaet.541},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5410},
  year      = {1997},
  abstract  = {Analytical models, describing oscillations of systems of interconnected solid and deformable bodies,making a complex movement in fields of inertia forces and gravitation forces, are resulted. Method of numerical investigation of dynamics of the specified systems, based on sharing of parameter prolongation method, Newton-Kantorovich algorithm, Flocke and Liapunov hteories, is developed. On the basis of constructed analytical models and numerical techniques a new, practically important problems of dynamics of systems, consisting of solid bodies, flexible rods, membranes and soft shells, which make a complex movement in fields of forces of inertia and gravity are solved. The received results are used during designing of responsible elements of structures, making a complex movement, which find application in construction and mechanical engineering.},
  subject      = {Festk{\"o}rpermechanik},
  language  = {en}
}
@article{MelnikovKadashevichSemenov1997,
  author    = {Melnikov, B. E. and Kadashevich, I. Y. and Semenov, Artem},
  title     = {Damage of Metalworkses under the Complex Varying Loading},
  doi       = {10.25643/bauhaus-universitaet.540},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5409},
  year      = {1997},
  abstract  = {The phenomenological and computational aspects of the various damage models applications for the low and multi cyclic fatigue processes are investigated. Damage is considered as internal state variable, describing macroscopic effects of the progressive material degradation, within the framework of continuum damage mechanics. Present analysis is restricted to the case of isotropic damage, which can be modeled by a scalar variable. The strain, force and power types of kinetic equations for the damage evolution description are considered. The original mixed strain-power type damage model is developed for taking into account the different physical fracture mechanism in monotone and cyclic loading. The constitutive equations of plastic flow theory coupled and uncoupled to damage has been considered. The rational algorithm of implementation into finite element code is considered for developed damage models. Set of the computational experiments has been carried out for the various structures (huge aerials, pipelines, fastening units, vessel of nuclear reactor) and cases of loading. The comparison of the predictions of the developed model with experimental data is performed for 1X18H10T steel tubular specimens for complex paths of loading and for complex profiles beams under cyclic loading. Damage field distribution is the basic information for the prediction of crack initiation in structures. The developed method of structural parameter for stress concentration zones is discussed for correcting of crack location. It allows to describe the crack initiation near surface domain as observe in numerous experiments.},
  subject      = {Stahlkonstruktion},
  language  = {en}
}
@article{StrukeljSkrinar1997,
  author    = {Strukelj, A. and Skrinar, Matjaz},
  title     = {The Evaluation of the Dynamical Soil-Bridge Interaction},
  doi       = {10.25643/bauhaus-universitaet.539},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5397},
  year      = {1997},
  abstract  = {In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1\%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts.},
  subject      = {Boden-Bauwerk-Wechselwirkung},
  language  = {en}
}
@article{Strukelj1997,
  author    = {Strukelj, A.},
  title     = {Some Problems in Obtaining the Green's Function of the Layered Soil},
  doi       = {10.25643/bauhaus-universitaet.538},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5388},
  year      = {1997},
  abstract  = {The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process},
  subject      = {Bodenmechanik},
  language  = {en}
}
@article{GanevMarinov1997,
  author    = {Ganev, T. and Marinov, M.},
  title     = {Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency},
  doi       = {10.25643/bauhaus-universitaet.537},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5375},
  year      = {1997},
  abstract  = {Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed.},
  subject      = {Platte},
  language  = {en}
}
@article{TolokTolokGomenyuk1997,
  author    = {Tolok, V. A. and Tolok, A. V. and Gomenyuk, S. I.},
  title     = {The instrumental System of Mechanics Problems Analysis of the deformed Solid Body},
  doi       = {10.25643/bauhaus-universitaet.536},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5361},
  year      = {1997},
  abstract  = {In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics.},
  subject      = {Festk{\"o}rpermechanik},
  language  = {en}
}
@article{KazakevitchVolkova1997,
  author    = {Kazakevitch, M. I. and Volkova, Viktorija},
  title     = {The exact Solution of the free pre-stressed Bar-Oscillations},
  doi       = {10.25643/bauhaus-universitaet.535},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5356},
  year      = {1997},
  abstract  = {In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force},
  subject      = {Bauteil},
  language  = {en}
}
@article{ZhakSidorenko1997,
  author    = {Zhak, S. V. and Sidorenko, V. S.},
  title     = {Optimized Models of Modes Choice for Displacement of technical Systems Objects},
  doi       = {10.25643/bauhaus-universitaet.534},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5347},
  year      = {1997},
  abstract  = {The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.},
  subject      = {Modellierung},
  language  = {en}
}
@article{Skrinar1997,
  author    = {Skrinar, Matjaz},
  title     = {Computation of Stresses and Settlements under an arbitrary Point in Homogenous, elastic, isotropic Half-Space, under the Load described by a uniform Load over a general quadrilateral},
  doi       = {10.25643/bauhaus-universitaet.533},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5338},
  year      = {1997},
  abstract  = {The problem of the computation of stresses and settlements in the half-space under various types of loads is often presented in geotechnical engineering. In 1885 Boussinesq advanced theoretical expressions to determine stresses at a point within an ideal mass. His equation considers a point load on the surface of a semi-infinite, homogeneous, isotropic, weightless, elastic half-space. Newmark in 1942 performed the integration of Boussinesq's equations for the vertical stress under a corner of a rectangular area loaded with a uniform load. The problem of the determination of vertical stresses under a rectangular shaped footing has been satisfactorily solved with renewal integration of the Boussinesq's equation over the arbitrary rectangle on surface of the half-space, with a non-uniform load represented with piecewise linear interpolation functions. The problem of the determination of stresses in the case when the footing shape is an arbitrary quadrilateral however remains unsolved. The paper discusses an approach to the computation of vertical stresses and settlements in an arbitrary point of the half-space, loaded with a uniform load, which shape in the ground plan can be a general four noded form with straight edges. Since the form is transformed into a biunit square and all integrations are performed over this area, all solutions are valid also for an arbitrary triangle by the implementation of the degeneration rule.},
  subject      = {Halbraum},
  language  = {en}
}
@article{Kaplinski1997,
  author    = {Kaplinski, O.},
  title     = {Phenomenon of inhertia in the Production Systems reliability Analysis},
  doi       = {10.25643/bauhaus-universitaet.532},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5320},
  year      = {1997},
  abstract  = {The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve.},
  subject      = {Zuverl{\"a}ssigkeitstheorie},
  language  = {en}
}
@article{LaemmerBurghardtMeissner1997,
  author    = {L{\"a}mmer, Lutz and Burghardt, Michael and Meißner, Udo F.},
  title     = {Parallele Netzgenerierung},
  doi       = {10.25643/bauhaus-universitaet.531},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5315},
  year      = {1997},
  abstract  = {Bei der Berechnung von statischen oder dynamischen Problemen mit Hilfe der Methode der Finiten Elemente ist eine Diskretisierung des zu berechnenden Gebietes notwendig. Bei einer sinnvollen Modellierung des Gebietes ist die Elementgr{\"o}ße meist nicht konstant, sondern ist an kritischen Stellen kleiner. Die Vorgaben hierf{\"u}r k{\"o}nnen einerseits aus Erfahrungen des Anwenders, andererseits aus einer Fehlerabsch{\"a}tzung einer vorangegangenen FE-Berechnung resultieren [5]. Soll die FE-Berechnung auf einem Parallelrechner geschehen, ist eine Partitionierung des Gebietes, d.h. eine Zuordnung der Elemente zu den Prozessoren, notwendig. Bei dem hier beschriebenen Ansatz werden nun im Gegensatz zu den {\"u}blichen Verfahren erst die Eingangsdaten f{\"u}r den Netzgenerator umgewandelt und dann das Elementnetz direkt auf dem Parallelrecher gleichzeitig auf allen Prozessoren erzeugt. Eine Aufteilung der Elemente auf die Prozessoren entsteht als Nebenprodukt der Netzaufteilung. Die entstehenden Teilgebietsgrenzen werden geometrisch minimiert. Die Lastbalance der Netzaufteilung sowie der FE-Rechnung wird durch ein ann{\"a}hernd gleiche Anzahl der Elemente je Partition gew{\"a}hrleistet. Als Eingabedaten wird eine Beschreibung des Gebietes durch Polygonz{\"u}ge, sowie einer Netzdichtefunktion, z.B. durch Punkte mit Angaben {\"u}ber die angestrebte Elementgr{\"o}ße, ben{\"o}tigt.},
  subject      = {Finite-Elemente-Methode},
  language  = {de}
}
@article{MisztalMisztal1997,
  author    = {Misztal, S. and Misztal, G.},
  title     = {Anwendung von Delta-Dirac-Funktion und Heviside-Funktion zur Berechnung der inneren Kr{\"a}fte und Verschiebungen in gebogenen Balken},
  doi       = {10.25643/bauhaus-universitaet.530},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5308},
  year      = {1997},
  abstract  = {Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erw{\"a}hnten Funktionen dargestellt. Dar{\"u}ber hinaus wird die M{\"o}glichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle F{\"a}lle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen L{\"o}sungen geben die M{\"o}glichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen erm{\"o}glicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die M{\"o}glichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen.},
  subject      = {Balken},
  language  = {de}
}