@techreport{BonhagDeRosaBoettgervonGynzRekowski, author = {Bonhag-De Rosa, Katharina and Boettger, Till and von Gynz-Rekowski, Christoph}, title = {Das Stapelhaus - Experimentelles Bauprojekt auf dem Campus der Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/BAUHAUS-UNIVERSITAET.3837}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181221-38371}, pages = {49}, abstract = {Das Stapelhaus f{\"o}rdert das experimentelle Bauen und Forschen an der Bauhaus-Universit{\"a}t Weimar. Ziel ist es, schrittweise Raummodule als Arbeitsr{\"a}ume von Studierenden f{\"u}r Studierende zu bauen. Im Zusammenhang bildet sich ein kompaktes und gestapeltes Raumgef{\"u}ge, das fakult{\"a}ts{\"u}bergreifend Raum f{\"u}r Experimente, Erlebnisse und Evaluierung l{\"a}sst.}, subject = {Architektur}, language = {de} } @unpublished{SteinerBourinetLahmer, author = {Steiner, Maria and Bourinet, Jean-Marc and Lahmer, Tom}, title = {An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression}, doi = {10.25643/BAUHAUS-UNIVERSITAET.3832}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181218-38320}, pages = {1 -- 33}, abstract = {In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly.}, subject = {Approximation}, language = {en} } @article{Vollmer, author = {Vollmer, Lisa}, title = {Mieter_innenproteste von den 1960er bis in die 1980er Jahre in der BRD. Von der Klassenallianz zur Aufspaltung und Einhegung ins neoliberale Projekt}, series = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2018}, journal = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 6, Heft 2/3}, doi = {10.25643/bauhaus-universitaet.3829}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181213-38290}, pages = {137 -- 148}, abstract = {Die sp{\"a}ten 1960er Jahre und vor allem die 1970er Jahre waren eine Hochphase der Mieter_innenproteste in der BRD. Dieser Beitrag verfolgt die These, dass die Krise der fordistischen Wohnraumversorgung in den 1960er Jahren, bzw. die von der Politik implementierten L{\"o}sungsstrategien dieser Krise, eine Klassenallianz in wohnungsbezogenen Protesten erm{\"o}glichte und, dass sich diese Klassenallianz im Laufe der 1970er und 1980er Jahre aufspaltete, was zur Einhegung des Protests in das entstehende neoliberale Projekt f{\"u}hrte. Im Folgenden beschreibe ich also zun{\"a}chst die Wohnungsfrage 1968 als Krise der fordistischen Wohnraumproduktion und damit die materielle Basis der Klassenallianz. Daran anschließend illustriere ich anhand von Protesten in den drei Bereichen Massenwohnungsbau, Sanierungsgebiete und Hausbesetzungen die Klassenallianz und vollziehe ich deren Aufspaltung nach. Und schließlich stelle ich die Frage, was heute aus dieser Geschichte gelernt werden kann.}, subject = {Soziale Bewegung}, language = {de} } @phdthesis{Goebel, author = {G{\"o}bel, Luise}, title = {Experimental and semi-analytical multiscale approaches for the characterization of the elastic and viscoelastic behavior of polymer-modified cement-based materials}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-269-9}, doi = {10.25643/bauhaus-universitaet.3827}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181211-38279}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {259}, abstract = {Polymer-modified cement concrete (PCC) is a heterogeneous building material with a hierarchically organized microstructure. Therefore, continuum micromechanics-based multiscale models represent a promising method to estimate the mechanical properties. By means of a bottom-up approach, homogenized properties at the macroscopic scale are derived considering microstructural characteristics. The extension of existing multiscale models for the application to PCC is the main objective of this work. For that, cross-scale experimental studies are required. Both macroscopic and microscopic mechanical tests are performed to characterize the elastic and viscoelastic properties of different PCC. The comparison between experiment and model prediction illustrates the success of the modeling approach.}, subject = {Elastizit{\"a}tsmodul}, language = {en} } @phdthesis{Mischke, author = {Mischke, Marcel}, title = {Keine Ahnung? Landschaft!}, doi = {10.25643/bauhaus-universitaet.3824}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181122-38242}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {182}, abstract = {... soll auf den folgenden Seiten eine dritte Richtung angedeutet und vorgezeichnet werden, die ebenso Interesse am Erkenntnisgewinn durch das Thema Landschaft bekundet, dies hingegen aus der Umkehrung heraus erreichen will. Dreht man den Richtungspfeil, stehen wir ihr, der Landschaft, gegen{\"u}ber. Vom Modus des Aktiven geraten wir in die Passivit{\"a}t. Damit wird eine Korrektur der Fragestellung m{\"o}glich. Es entsteht eine Perspektive, die die {\"U}berlegungen zul{\"a}sst: Was die Landschaft eigentlich mit uns macht?, welchen Horizont sie uns er{\"o}ffnet und entstehen l{\"a}sst, welche Bedeutung und welche Qualit{\"a}t wir dem ›Landschaftlichen‹ zuschreiben k{\"o}nnen, worin die Notwendigkeit ihres Erhalts und der Nutzen f{\"u}r die gegenw{\"a}rtige Gesellschaft bestehen kann.}, subject = {Landschaft}, language = {de} } @unpublished{RezakazemiMosaviShirazian, author = {Rezakazemi, Mashallah and Mosavi, Amir and Shirazian, Saeed}, title = {ANFIS pattern for molecular membranes separation optimization}, volume = {2018}, doi = {10.25643/BAUHAUS-UNIVERSITAET.3821}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181122-38212}, pages = {1 -- 20}, abstract = {In this work, molecular separation of aqueous-organic was simulated by using combined soft computing-mechanistic approaches. The considered separation system was a microporous membrane contactor for separation of benzoic acid from water by contacting with an organic phase containing extractor molecules. Indeed, extractive separation is carried out using membrane technology where complex of solute-organic is formed at the interface. The main focus was to develop a simulation methodology for prediction of concentration distribution of solute (benzoic acid) in the feed side of the membrane system, as the removal efficiency of the system is determined by concentration distribution of the solute in the feed channel. The pattern of Adaptive Neuro-Fuzzy Inference System (ANFIS) was optimized by finding the optimum membership function, learning percentage, and a number of rules. The ANFIS was trained using the extracted data from the CFD simulation of the membrane system. The comparisons between the predicted concentration distribution by ANFIS and CFD data revealed that the optimized ANFIS pattern can be used as a predictive tool for simulation of the process. The R2 of higher than 0.99 was obtained for the optimized ANFIS model. The main privilege of the developed methodology is its very low computational time for simulation of the system and can be used as a rigorous simulation tool for understanding and design of membrane-based systems. Highlights are, Molecular separation using microporous membranes. Developing hybrid model based on ANFIS-CFD for the separation process, Optimization of ANFIS structure for prediction of separation process}, subject = {Fluid}, language = {en} } @phdthesis{Schollmeyer, author = {Schollmeyer, Andre}, title = {Efficient and High-Quality Rendering of Higher-Order Geometric Data Representations}, doi = {10.25643/bauhaus-universitaet.3823}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181120-38234}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {143}, abstract = {Computer-Aided Design (CAD) bezeichnet den Entwurf industrieller Produkte mit Hilfe von virtuellen 3D Modellen. Ein CAD-Modell besteht aus parametrischen Kurven und Fl{\"a}chen, in den meisten F{\"a}llen non-uniform rational B-Splines (NURBS). Diese mathematische Beschreibung wird ebenfalls zur Analyse, Optimierung und Pr{\"a}sentation des Modells verwendet. In jeder dieser Entwicklungsphasen wird eine unterschiedliche visuelle Darstellung ben{\"o}tigt, um den entsprechenden Nutzern ein geeignetes Feedback zu geben. Designer bevorzugen beispielsweise illustrative oder realistische Darstellungen, Ingenieure ben{\"o}tigen eine verst{\"a}ndliche Visualisierung der Simulationsergebnisse, w{\"a}hrend eine immersive 3D Darstellung bei einer Benutzbarkeitsanalyse oder der Designauswahl hilfreich sein kann. Die interaktive Darstellung von NURBS-Modellen und -Simulationsdaten ist jedoch aufgrund des hohen Rechenaufwandes und der eingeschr{\"a}nkten Hardwareunterst{\"u}tzung eine große Herausforderung. Diese Arbeit stellt vier neuartige Verfahren vor, welche sich mit der interaktiven Darstellung von NURBS-Modellen und Simulationensdaten befassen. Die vorgestellten Algorithmen nutzen neue F{\"a}higkeiten aktueller Grafikkarten aus, um den Stand der Technik bez{\"u}glich Qualit{\"a}t, Effizienz und Darstellungsgeschwindigkeit zu verbessern. Zwei dieser Verfahren befassen sich mit der direkten Darstellung der parametrischen Beschreibung ohne Approximationen oder zeitaufw{\"a}ndige Vorberechnungen. Die dabei vorgestellten Datenstrukturen und Algorithmen erm{\"o}glichen die effiziente Unterteilung, Klassifizierung, Tessellierung und Darstellung getrimmter NURBS-Fl{\"a}chen und einen interaktiven Ray-Casting-Algorithmus f{\"u}r die Isofl{\"a}chenvisualisierung von NURBSbasierten isogeometrischen Analysen. Die weiteren zwei Verfahren beschreiben zum einen das vielseitige Konzept der programmierbaren Transparenz f{\"u}r illustrative und verst{\"a}ndliche Visualisierungen tiefenkomplexer CAD-Modelle und zum anderen eine neue hybride Methode zur Reprojektion halbtransparenter und undurchsichtiger Bildinformation f{\"u}r die Beschleunigung der Erzeugung von stereoskopischen Bildpaaren. Die beiden letztgenannten Ans{\"a}tze basieren auf rasterisierter Geometrie und sind somit ebenfalls f{\"u}r normale Dreiecksmodelle anwendbar, wodurch die Arbeiten auch einen wichtigen Beitrag in den Bereichen der Computergrafik und der virtuellen Realit{\"a}t darstellen. Die Auswertung der Arbeit wurde mit großen, realen NURBS-Datens{\"a}tzen durchgef{\"u}hrt. Die Resultate zeigen, dass die direkte Darstellung auf Grundlage der parametrischen Beschreibung mit interaktiven Bildwiederholraten und in subpixelgenauer Qualit{\"a}t m{\"o}glich ist. Die Einf{\"u}hrung programmierbarer Transparenz erm{\"o}glicht zudem die Umsetzung kollaborativer 3D Interaktionstechniken f{\"u}r die Exploration der Modelle in virtuellenUmgebungen sowie illustrative und verst{\"a}ndliche Visualisierungen tiefenkomplexer CAD-Modelle. Die Erzeugung stereoskopischer Bildpaare f{\"u}r die interaktive Visualisierung auf 3D Displays konnte beschleunigt werden. Diese messbare Verbesserung wurde zudem im Rahmen einer Nutzerstudie als wahrnehmbar und vorteilhaft befunden.}, subject = {Rendering}, language = {en} } @article{BenzTarabenLichtenheldetal., author = {Benz, Alexander and Taraben, Jakob and Lichtenheld, Thomas and Morgenthal, Guido and V{\"o}lker, Conrad}, title = {Thermisch-energetische Geb{\"a}udesimulation auf Basis eines Bauwerksinformationsmodells}, series = {Bauphysik}, journal = {Bauphysik}, number = {40, Heft 2}, doi = {10.25643/bauhaus-universitaet.3819}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181102-38190}, pages = {61 -- 67}, abstract = {F{\"u}r eine Absch{\"a}tzung des Heizw{\"a}rmebedarfs von Geb{\"a}uden und Quartieren k{\"o}nnen thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Geb{\"a}udemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Baupl{\"a}nen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Sp{\"a}tere bauliche Ver{\"a}nderungen des Geb{\"a}udes m{\"u}ssen h{\"a}ufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zus{\"a}tzlich erh{\"o}ht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einfl{\"u}sse gegeben sind. Die Verkn{\"u}pfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte {\"u}berf{\"u}hrbar. Mithilfe des Building Information Modeling (BIM) k{\"o}nnen Simulationsdaten sowohl konsistent gespeichert als auch {\"u}ber Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierf{\"u}r wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten {\"U}bergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen erm{\"o}glicht. Dabei werden geometrische und physikalische Parameter direkt aus einem {\"u}ber den gesamten Lebenszyklus aktuellen Geb{\"a}udemodell extrahiert und an die Simulation {\"u}bergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Geb{\"a}udemodellierung und nach sp{\"a}teren baulichen Ver{\"a}nderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollst{\"a}ndige {\"U}bertragbarkeit der Eingangs- und Ausgangswerte sicher. Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products. By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data.}, subject = {Geb{\"a}udeh{\"u}lle}, language = {de} } @article{FaizollahzadehArdabiliNajafiAlizamiretal., author = {Faizollahzadeh Ardabili, Sina and Najafi, Bahman and Alizamir, Meysam and Mosavi, Amir and Shamshirband, Shahaboddin and Rabczuk, Timon}, title = {Using SVM-RSM and ELM-RSM Approaches for Optimizing the Production Process of Methyl and Ethyl Esters}, series = {Energies}, journal = {Energies}, number = {11, 2889}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en11112889}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181025-38170}, pages = {1 -- 20}, abstract = {The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86\% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. \%, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46\% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. \%, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6\% for ethyl ester and 3.1\% for methyl ester, compared with those for the experimental data.}, subject = {Biodiesel}, language = {en} } @article{GhazvineiDarvishiMosavietal., author = {Ghazvinei, Pezhman Taherei and Darvishi, Hossein Hassanpour and Mosavi, Amir and Yusof, Khamaruzaman bin Wan and Alizamir, Meysam and Shamshirband, Shahaboddin and Chau, Kwok-Wing}, title = {Sugarcane growth prediction based on meteorological parameters using extreme learning machine and artificial neural network}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2018}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {12,1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2018.1526119}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181017-38129}, pages = {738 -- 749}, abstract = {Management strategies for sustainable sugarcane production need to deal with the increasing complexity and variability of the whole sugar system. Moreover, they need to accommodate the multiple goals of different industry sectors and the wider community. Traditional disciplinary approaches are unable to provide integrated management solutions, and an approach based on whole systems analysis is essential to bring about beneficial change to industry and the community. The application of this approach to water management, environmental management and cane supply management is outlined, where the literature indicates that the application of extreme learning machine (ELM) has never been explored in this realm. Consequently, the leading objective of the current research was set to filling this gap by applying ELM to launch swift and accurate model for crop production data-driven. The key learning has been the need for innovation both in the technical aspects of system function underpinned by modelling of sugarcane growth. Therefore, the current study is an attempt to establish an integrate model using ELM to predict the concluding growth amount of sugarcane. Prediction results were evaluated and further compared with artificial neural network (ANN) and genetic programming models. Accuracy of the ELM model is calculated using the statistics indicators of Root Means Square Error (RMSE), Pearson Coefficient (r), and Coefficient of Determination (R2) with promising results of 0.8, 0.47, and 0.89, respectively. The results also show better generalization ability in addition to faster learning curve. Thus, proficiency of the ELM for supplementary work on advancement of prediction model for sugarcane growth was approved with promising results.}, subject = {K{\"u}nstliche Intelligenz}, language = {en} } @phdthesis{Vesper, author = {Vesper, Andreas}, title = {Entwicklung eines Berechnungsverfahrens zur Ermittlung der Kapazit{\"a}t in lichtsignalgeregelten Zufahrten mit zus{\"a}tzlichen Aufstellstreifen bei gleichzeitiger Freigabezeit}, doi = {10.25643/bauhaus-universitaet.3789}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180925-37895}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {338}, abstract = {Im Rahmen der Dissertation ist ein analytisches Berechnungsverfahren zur Ermittlung der Kapazit{\"a}t in lichtsignalgeregelten Zufahrten mit zus{\"a}tzlichen Aufstellstreifen bei gleichzeitiger Freigabezeit entwickelt worden, dass sich durch folgende Eigenschaften auszeichnet: a) einfaches Berechnungsverfahren - Ansatz eines einfachen linearen Berechnungsansatzes, der auf den Grundzusammenh{\"a}ngen des Verkehrsablaufs in lichtsignalgeregelten Zufahrten aufbaut, b) breites Anwendungsgebiet - Berechnungsverfahren kann in Zufahrten mit bis zu zwei zus{\"a}tzlichen Aufstellstreifen angewendet werden, c) hohe Genauigkeit - Im Rahmen eines direkten Vergleichs konnte u. a. gezeigt werden, dass mit dem hergeleiteten analytischen Berechnungsverfahren genauere Kapazit{\"a}tswerte ermittelt werden k{\"o}nnen, als mit dem Berechnungsverfahren nach HBS 2015.}, subject = {Verkehrssignalanlage}, language = {de} } @phdthesis{Michel, author = {Michel, Ralf}, title = {Licht - Farbe - Licht : Zur Integration von Design und Technik in der Designforschung mit Licht und Farbe}, doi = {10.25643/bauhaus-universitaet.3794}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180921-37941}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {224}, abstract = {Die Thesis untersucht am Beispiel von Farb-Licht Forschungen (Interaktion dynamischen Lichts mit farbigen Oberfl{\"a}chen) und der Designforschungen am Potenzial der organisch Licht emittierenden Dioden (OLED) integrierende Aspekte des Designs im Kontext dieser Technologien. Des weiteren reflektiert die Thesis am Beispiel dieser Designforschungen das Verh{\"a}ltnis von Designforschung und Innovation f{\"u}r die gestalterischen Disziplinen.}, subject = {Design}, language = {de} } @phdthesis{Hawranke, author = {Hawranke, Thomas}, title = {Modding - K{\"u}nstlerische Forschung in Computerspielen}, doi = {10.25643/bauhaus-universitaet.3788}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180919-37886}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {299}, abstract = {Die hier vorliegende Arbeit befasst sich mit dem Modifizieren von Computerspielen (Modding). Die Ann{\"a}herung an das Modding geschieht aus zwei unterschiedlichen Blickrichtungen: Zum einen wird mit einem analytischen Blick auf das Themenfeld geschaut, der das bereits Erforschte mit den eigenen Suchbewegungen kombiniert. Zum anderen wird die Perspektive der Handlung eingenommen, die sich in der Widerst{\"a}ndigkeit des Materials, der Werkzeuge und der Spieltechnologie {\"a}ußert. Im Mittelpunkt der Auseinandersetzung stehen das Modding als Praxis, die Mods als Derivate und die Erforschung des Computerspiels mit den Praktiken und Derivaten des Modifizierens. Das Modding wird so zu einer epistemischen Praxis des Computerspiels. Die hier formulierten {\"U}berlegungen zum Modding, als eine forschende Praxis des Computerspiels, pr{\"a}sentieren eine Vorgehensweise, die {\"a}sthetische, widerst{\"a}ndige und stabilisierende Aspekte in sich vereint. Sie dient der Erforschung des Computerspiels entlang seiner Diskussionen, Materialien, Technologien und Praktiken und fokussiert hierbei auf das Abseitige, dass als integraler Bestandteil des Computerspiels verstanden wird. Mit diesem Blick auf die Grenzen des Computerspielens werden Dinge sichtbar, die zwar Teil der synthetischen Computerspielwelten sind, durch dessen Inszenierungen und Atmosph{\"a}ren jedoch verschleiert werden. Der hier entwickelte Ansatz erm{\"o}glicht einen Perspektivenwechsel innerhalb dieser Welten und die Erforschung des Computerspiels unter besonderer Ber{\"u}cksichtigung seiner eingeschriebenen Normen und Machtverh{\"a}ltnissen. Das Modding dient hierbei als eine kritische Praxis zur Entschl{\"u}sselung dieser medial vermittelten Konstellationen.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @misc{NawazKhan, author = {Nawaz Khan, Shah}, title = {Numerical analysis of deformation and stability in the formation for railway tracks}, doi = {10.25643/bauhaus-universitaet.3786}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180907-37867}, abstract = {Over the past few decades, the increasing demands of railways operations in the form of heavy loading and high speed have been noticed. Railway formation and ballast deform progressive under heavy axle cyclic loading, therefore the rail track needs proper design of ballast and formation bed to achieve the desire stiffness and stability for the safe and sound serviceability of the track. For the overall stability of the track on soft formation, the ground is improved by different techniques prior to the construction on that, in order to avoid the failure and differential settlement during the designed trains operation. The numerical analyses illustrate that the total deformation and bearing capacity of the railway tracks mostly depend on the changes in the friction angle and cohesion of the selected soils of the subgrade. To avoid failure in the formation of track under the design loads, the proper selection of types of soils, its layer thickness, well compaction during construction and provision of proper track drainage system are extremely important. For the construction of new railway tracks the soils having greater values of friction angle, cohesion and elastic stiffness with the well graded ballast cushion under the sleepers of designed side slopes can be used to reduce the maintenance cost, considerably increase the life time of the components of the tracks and ultimately give better performance of the tracks.}, subject = {Eisenbahnstrecke}, language = {en} } @unpublished{MosaviMoeiniAhmadpouretal., author = {Mosavi, Amir and Moeini, Iman and Ahmadpour, Mohammad and Alharbi, Naif and E. Gorji, Nima}, title = {Modeling the time-dependent characteristics of perovskite solar cells}, doi = {10.25643/bauhaus-universitaet.3757}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180907-37573}, abstract = {We proposed two different time-dependent modeling approaches for variation of device characteristics of perovskite solar cells under stress conditions. The first approach follows Sah-Noyce-Shockley (SNS) model based on Shockley-Read-Hall recombination/generation across the depletion width of pn junction and the second approach is based on thermionic emission model for Schottky diodes. The connecting point of these approaches to time variation is the time-dependent defect generation in depletion width (W) of the junction. We have fitted the two models with experimental data reported in the literature to perovskite solar cell and found out that each model has a superior explanation for degradation of device metrics e.g. current density and efficiency by time under stress conditions. Nevertheless, the Sah-Noyce-Shockley model is more reliable than thermionic emission at least for solar cells.}, subject = {Solarzelle}, language = {en} } @unpublished{MosaviTorabiHashemietal., author = {Mosavi, Amir and Torabi, Mehrnoosh and Hashemi, Sattar and Saybani, Mahmoud Reza and Shamshirband, Shahaboddin}, title = {A Hybrid Clustering and Classification Technique for Forecasting Short-Term Energy Consumption}, doi = {10.25643/bauhaus-universitaet.3755}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180907-37550}, abstract = {Electrical energy distributor companies in Iran have to announce their energy demand at least three 3-day ahead of the market opening. Therefore, an accurate load estimation is highly crucial. This research invoked methodology based on CRISP data mining and used SVM, ANN, and CBA-ANN-SVM (a novel hybrid model of clustering with both widely used ANN and SVM) to predict short-term electrical energy demand of Bandarabbas. In previous studies, researchers introduced few effective parameters with no reasonable error about Bandarabbas power consumption. In this research we tried to recognize all efficient parameters and with the use of CBA-ANN-SVM model, the rate of error has been minimized. After consulting with experts in the field of power consumption and plotting daily power consumption for each week, this research showed that official holidays and weekends have impact on the power consumption. When the weather gets warmer, the consumption of electrical energy increases due to turning on electrical air conditioner. Also, con-sumption patterns in warm and cold months are different. Analyzing power consumption of the same month for different years had shown high similarity in power consumption patterns. Factors with high impact on power consumption were identified and statistical methods were utilized to prove their impacts. Using SVM, ANN and CBA-ANN-SVM, the model was built. Sine the proposed method (CBA-ANN-SVM) has low MAPE 5 1.474 (4 clusters) and MAPE 5 1.297 (3 clusters) in comparison with SVM (MAPE 5 2.015) and ANN (MAPE 5 1.790), this model was selected as the final model. The final model has the benefits from both models and the benefits of clustering. Clustering algorithm with discovering data structure, divides data into several clusters based on similarities and differences between them. Because data inside each cluster are more similar than entire data, modeling in each cluster will present better results. For future research, we suggest using fuzzy methods and genetic algorithm or a hybrid of both to forecast each cluster. It is also possible to use fuzzy methods or genetic algorithms or a hybrid of both without using clustering. It is issued that such models will produce better and more accurate results. This paper presents a hybrid approach to predict the electric energy usage of weather-sensitive loads. The presented methodutilizes the clustering paradigm along with ANN and SVMapproaches for accurate short-term prediction of electric energyusage, using weather data. Since the methodology beinginvoked in this research is based on CRISP data mining, datapreparation has received a gr eat deal of attention in thisresear ch. Once data pre-processing was done, the underlyingpattern of electric energy consumption was extracted by themeans of machine learning methods to precisely forecast short-term energy consumption. The proposed approach (CBA-ANN-SVM) was applied to real load data and resulting higher accu-racy comparing to the existing models. 2018 American Institute of Chemical Engineers Environ Prog, 2018 https://doi.org/10.1002/ep.12934}, subject = {Data Mining}, language = {en} } @article{BumbergerMaiSchmidtetal., author = {Bumberger, Jan and Mai, Juliane and Schmidt, Felix and L{\"u}nenschloß, Peter and Wagner, Norman and T{\"o}pfer, Hannes}, title = {Spatial Retrieval of Broadband Dielectric Spectra}, series = {Sensors}, journal = {Sensors}, doi = {10.3390/s18092780}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180906-37831}, pages = {1 -- 22}, abstract = {A broadband soil dielectric spectra retrieval approach ( 1 MHz- 2 GHz) has been implemented for a layered half space. The inversion kernel consists of a two-port transmission line forward model in the frequency domain and a constitutive material equation based on a power law soil mixture rule (Complex Refractive Index Model - CRIM). The spatially-distributed retrieval of broadband dielectric spectra was achieved with a global optimization approach based on a Shuffled Complex Evolution (SCE) algorithm using the full set of the scattering parameters. For each layer, the broadband dielectric spectra were retrieved with the corresponding parameters thickness, porosity, water saturation and electrical conductivity of the aqueous pore solution. For the validation of the approach, a coaxial transmission line cell measured with a network analyzer was used. The possibilities and limitations of the inverse parameter estimation were numerically analyzed in four scenarios. Expected and retrieved layer thicknesses, soil properties and broadband dielectric spectra in each scenario were in reasonable agreement. Hence, the model is suitable for an estimation of in-homogeneous material parameter distributions. Moreover, the proposed frequency domain approach allows an automatic adaptation of layer number and thickness or regular grids in time and/or space.}, subject = {Theoretische Elektrotechnik}, language = {en} } @inproceedings{OPUS4-3785, title = {30. Forum Bauinformatik}, editor = {Steiner, Maria and Theiler, Michael and Mirboland, Mahsa}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180917-37854}, pages = {424}, abstract = {Die Bauhaus-Universit{\"a}t Weimar ist seit langer Zeit mit dem Forum Bauinformatik eng verbunden. So wurde die Veranstaltung 1989 hier durch den Arbeitskreis Bauinformatik ins Leben gerufen und auch das 10. und 18. Forum Bauinformatik (1998 bzw. 2006) fand in Weimar statt. In diesem Jahr freuen wir uns daher besonders, das 30. Jubil{\"a}um an der Bauhaus-Universit{\"a}t Weimar ausrichten zu d{\"u}rfen und viele interessierte Wissenschaftler und Wissenschaftlerinnen aus dem Bereich der Bauinformatik in Weimar willkommen zu heißen. Das Forum Bauinformatik hat sich l{\"a}ngst zu einem festen Bestandteil der Bauinformatik im deutschsprachigen Raum entwickelt. Dabei steht es traditionsgem{\"a}ß unter dem Motto „von jungen Forschenden f{\"u}r junge Forschende", wodurch insbesondere Nachwuchswissenschaftlerinnen und ‑wissenschaftlern die M{\"o}glichkeit geboten wird, ihre Forschungsarbeiten zu pr{\"a}sentieren, Problemstellungen fachspezifisch zu diskutieren und sich {\"u}ber den neuesten Stand der Forschung zu informieren. Zudem wird eine ausgezeichnete Gelegenheit geboten, in die wissenschaftliche Gemeinschaft im Bereich der Bauinformatik einzusteigen und Kontakte mit anderen Forschenden zu kn{\"u}pfen. In diesem Jahr erhielten wir 49 interessante und qualitativ hochwertige Beitr{\"a}ge vor allem in den Themenbereichen Simulation, Modellierung, Informationsverwaltung, Geoinformatik, Structural Health Monitoring, Visualisierung, Verkehrssimulation und Optimierung. Daf{\"u}r m{\"o}chten wir uns ganz besonders bei allen Autoren, Co-Autoren und Reviewern bedanken, die durch ihr Engagement das diesj{\"a}hrige Forum Bauinformatik erst m{\"o}glich gemacht haben. Wir danken zudem Professor Große und Professor D{\´i}az f{\"u}r die Unterst{\"u}tzung bei der Auswahl der Beitr{\"a}ge f{\"u}r die Best Paper Awards. Ein herzliches Dankesch{\"o}n geht an die Kollegen an der Professur Informatik im Bauwesen der Bauhaus-Universit{\"a}t Weimar f{\"u}r die organisatorische, technische und beratende Unterst{\"u}tzung w{\"a}hrend der Planung der Veranstaltung.}, subject = {Bauinformatik}, language = {de} } @phdthesis{Hommel, author = {Hommel, Angela}, title = {Diskret holomorphe Funktionen und deren Bedeutung bei der L{\"o}sung von Differenzengleichungen}, doi = {10.25643/bauhaus-universitaet.3784}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180827-37846}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Auf der Grundlage diskreter Cauchy-Riemann Operatoren werden diskret holomorphe Funktionen definiert und detailliert studiert. Darauf aufbauend wird die L{\"o}sung von Differenzengleichungen mit Hilfe der diskret holomorphen Funktionen beschrieben.}, subject = {Differenzengleichung}, language = {de} } @phdthesis{Behkalam, author = {Behkalam, Kaya}, title = {Seeing History - The Augmented Archive}, doi = {10.25643/bauhaus-universitaet.3781}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180822-37818}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {SEEING HISTORY - THE AUGMENTED ARCHIVE erforscht - in Theorie und Praxis - die Medialit{\"a}ten des Archivs in Zeiten des {\"U}bergangs vom Speichermedium hin zum Modus des {\"U}bertragens. Am Beispiel {\"A}gyptens seit den politischen Umw{\"a}lzungen 2011 wird ein neues Archivsystem entwickelt, das mit Hilfe von Augmented Reality Technologie - d.h. der virtuellen Erweiterung des Realraums von mobiler Videotechnik durch Metainformationen - das umfassendste bestehende Videoarchiv zur {\"a}gyptischen Revolution im Stadtraum Kairos per GPS-Kodierung zur Verf{\"u}gung stellt.}, subject = {Medienkunst}, language = {de} }