@article{JiangZhuangRabczuk,
  author    = {Jiang, Jin-Wu and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Orientation dependent thermal conductance in single-layer MoS 2},
  series = {Scientific Reports},
  journal   = {Scientific Reports},
  doi       = {10.1038/srep02209},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170418-31417},
  abstract  = {We investigate the thermal conductivity in the armchair and zigzag MoS2 nanoribbons, by combining the non-equilibrium Green's function approach and the first-principles method. A strong orientation dependence is observed in the thermal conductivity. Particularly, the thermal conductivity for the armchair MoS2 nanoribbon is about 673.6 Wm-1 K-1 in the armchair nanoribbon, and 841.1 Wm-1 K-1 in the zigzag nanoribbon at room temperature. By calculating the Caroli transmission, we disclose the underlying mechanism for this strong orientation dependence to be the fewer phonon transport channels in the armchair MoS2 nanoribbon in the frequency range of [150, 200] cm-1. Through the scaling of the phonon dispersion, we further illustrate that the thermal conductivity calculated for the MoS2 nanoribbon is esentially in consistent with the superior thermal conductivity found for graphene.},
  subject      = {Mechanische Eigenschaft},
  language  = {en}
}
@article{VuBacNguyenXuanChenetal.,
  author    = {Vu-Bac, N. and Nguyen-Xuan, Hung and Chen, Lei and Lee, C.K. and Zi, Goangseup and Zhuang, Xiaoying and Liu, G.R. and Rabczuk, Timon},
  title     = {A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2013/978026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170426-31676},
  abstract  = {This paper presents a novel numerical procedure based on the combination of an edge-based smoothed finite element (ES-FEM) with a phantom-node method for 2D linear elastic fracture mechanics. In the standard phantom-node method, the cracks are formulated by adding phantom nodes, and the cracked element is replaced by two new superimposed elements. This approach is quite simple to implement into existing explicit finite element programs. The shape functions associated with discontinuous elements are similar to those of the standard finite elements, which leads to certain simplification with implementing in the existing codes. The phantom-node method allows modeling discontinuities at an arbitrary location in the mesh. The ES-FEM model owns a close-to-exact stiffness that is much softer than lower-order finite element methods (FEM). Taking advantage of both the ES-FEM and the phantom-node method, we introduce an edge-based strain smoothing technique for the phantom-node method. Numerical results show that the proposed method achieves high accuracy compared with the extended finite element method (XFEM) and other reference solutions.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{VuBacLahmerZhangetal.,
  author    = {Vu-Bac, N. and Lahmer, Tom and Zhang, Yancheng and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs)},
  series = {Composites Part B Engineering},
  journal   = {Composites Part B Engineering},
  pages     = {80 -- 95},
  abstract  = {Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiRafieeZhuangetal.,
  author    = {Ghasemi, Hamid and Rafiee, Roham and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon},
  title     = {Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {295 -- 305},
  abstract  = {Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhangZhuangMuthuetal.,
  author    = {Zhang, Yancheng and Zhuang, Xiaoying and Muthu, Jacob and Mabrouki, Tarek and Fontaine, Micha{\"e}l and Gong, Yadong and Rabczuk, Timon},
  title     = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation},
  series = {Composites Part B Engineering},
  journal   = {Composites Part B Engineering},
  pages     = {27 -- 33},
  abstract  = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhMuthuZhuangetal.,
  author    = {Nguyen-Thanh, Nhon and Muthu, Jacob and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {369 -- 385},
  abstract  = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiBrighentiZhuangetal.,
  author    = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon},
  title     = {Optimization of fiber distribution in fiber reinforced composite by using NURBS functions},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {463 -- 473},
  abstract  = {Optimization of fiber distribution in fiber reinforced composite by using NURBS functions},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiBrighentiZhuangetal.,
  author    = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon},
  title     = {Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements},
  series = {Structural and Multidisciplinary Optimization},
  journal   = {Structural and Multidisciplinary Optimization},
  abstract  = {Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhuangHuangLiangetal.,
  author    = {Zhuang, Xiaoying and Huang, Runqiu and Liang, Chao and Rabczuk, Timon},
  title     = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  doi       = {10.1155/2014/179169},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31726},
  abstract  = {Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.},
  subject      = {Energiespeicherung},
  language  = {en}
}
@article{ZhuangHuangRabczuketal.,
  author    = {Zhuang, Xiaoying and Huang, Runqiu and Rabczuk, Timon and Liang, C.},
  title     = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  abstract  = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{BudarapuGracieYangetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Yang, Shih-Wei and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Efficient Coarse Graining in Multiscale Modeling of Fracture},
  series = {Theoretical and Applied Fracture Mechanics},
  journal   = {Theoretical and Applied Fracture Mechanics},
  pages     = {126 -- 143},
  abstract  = {Efficient Coarse Graining in Multiscale Modeling of Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacLahmerKeiteletal.,
  author    = {Vu-Bac, N. and Lahmer, Tom and Keitel, Holger and Zhao, Jun-Hua and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations},
  series = {Mechanics of Materials},
  journal   = {Mechanics of Materials},
  pages     = {70 -- 84},
  abstract  = {Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiBrighentiZhuangetal.,
  author    = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon},
  title     = {Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach},
  series = {Structural and Multidisciplinary Optimization},
  journal   = {Structural and Multidisciplinary Optimization},
  pages     = {99 -- 112},
  abstract  = {Optimum _ber content and distribution in _ber-reinforced solids using a reliability and NURBS based sequential optimization approach},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacSilaniLahmeretal.,
  author    = {Vu-Bac, N. and Silani, Mohammad and Lahmer, Tom and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {520 -- 535},
  abstract  = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacRafieeZhuangetal.,
  author    = {Vu-Bac, N. and Rafiee, Roham and Zhuang, Xiaoying and Lahmer, Tom and Rabczuk, Timon},
  title     = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  series = {Composites Part B: Engineering},
  journal   = {Composites Part B: Engineering},
  pages     = {446 -- 464},
  abstract  = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhValizadehNguyenetal.,
  author    = {Nguyen-Thanh, Nhon and Valizadeh, Navid and Nguyen, Manh Hung and Nguyen-Xuan, Hung and Zhuang, Xiaoying and Areias, Pedro and Zi, Goangseup and Bazilevs, Yuri and De Lorenzis, Laura and Rabczuk, Timon},
  title     = {An extended isogeometric thin shell analysis based on Kirchhoff-Love theory},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {265 -- 291},
  abstract  = {An extended isogeometric thin shell analysis based on Kirchho_-Love theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacLahmerZhuangetal.,
  author    = {Vu-Bac, N. and Lahmer, Tom and Zhuang, Xiaoying and Nguyen-Thoi, T. and Rabczuk, Timon},
  title     = {A software framework for probabilistic sensitivity analysis for computationally expensive models},
  series = {Advances in Engineering Software},
  journal   = {Advances in Engineering Software},
  pages     = {19 -- 31},
  abstract  = {A software framework for probabilistic sensitivity analysis for computationally expensive models},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Park, Harold S. and Rabczuk, Timon},
  title     = {Topology optimization of piezoelectric nanostructures},
  series = {Journal of the Mechanics and Physics of Solids},
  journal   = {Journal of the Mechanics and Physics of Solids},
  pages     = {316 -- 335},
  abstract  = {Topology optimization of piezoelectric nanostructures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  pages     = {153 -- 176},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}