@inproceedings{AldaCremersBilek2004,
  author    = {Alda, Sascha and Cremers, Armin B. and Bilek, Jochen},
  title     = {Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures},
  doi       = {10.25643/bauhaus-universitaet.148},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1481},
  year      = {2004},
  abstract  = {Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent-peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{BaranskiBoron2003,
  author    = {Baranski, Jacek and Boron, Jacek},
  title     = {Computer Modeling of the Joints for WGP Construction Systems},
  doi       = {10.25643/bauhaus-universitaet.293},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2935},
  year      = {2003},
  abstract  = {Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used.},
  subject      = {Geb{\"a}ude},
  language  = {en}
}
@inproceedings{BergerGraeffWeinberg1997,
  author    = {Berger, Hans and Graeff-Weinberg, K.},
  title     = {FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-{\"U}bergangselementen},
  doi       = {10.25643/bauhaus-universitaet.426},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4267},
  year      = {1997},
  abstract  = {Detailuntersuchungen an Tragwerken f{\"u}hren bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. W{\"a}hrend in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gew{\"a}hlt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des {\"U}bergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-{\"U}bergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits {\"u}ber nur eine Stufe erzielen l{\"a}ßt. Diese neu entwickelten sogenannten pNh-Elemente erm{\"o}glichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten f{\"u}r h-Verfeinerung). Das wird durch N st{\"u}ckweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht {\"a}quidistant sein braucht. Dar{\"u}ber hinaus ist es m{\"o}glich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der {\"U}bergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung l{\"a}ßt sich dies besonders g{\"u}nstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit {\"U}bergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten {\"U}bergangselementkonzeptes umfassend demonstriert.},
  subject      = {Tragwerk},
  language  = {de}
}
@inproceedings{BoukampAkinci2004,
  author    = {Boukamp, Frank and Akinci, Burcu},
  title     = {Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications},
  doi       = {10.25643/bauhaus-universitaet.131},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1315},
  year      = {2004},
  abstract  = {This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system.},
  subject      = {Bauwerk},
  language  = {en}
}
@article{Dudek1997,
  author    = {Dudek, Mariusz},
  title     = {Modellierung der Verkehrsmittelwahl},
  doi       = {10.25643/bauhaus-universitaet.481},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4817},
  year      = {1997},
  abstract  = {Die Zielstellung der Modal­Split­Betrachtungen l{\"a}uft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel ausw{\"a}hlen. In dieser Ver{\"o}ffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgew{\"a}hlte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das f{\"u}r die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde .},
  subject      = {Verkehrsmittelwahl},
  language  = {de}
}
@inproceedings{EslimyIsfahanyPegels2004,
  author    = {Eslimy-Isfahany, S. H. R. and Pegels, Georg},
  title     = {Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran},
  doi       = {10.25643/bauhaus-universitaet.142},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1421},
  year      = {2004},
  abstract  = {The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@article{Fink2004,
  author    = {Fink, Thomas},
  title     = {Structural analysis, design and detailing using standard CAD software and standard building information model},
  doi       = {10.25643/bauhaus-universitaet.270},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2702},
  year      = {2004},
  abstract  = {This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models.},
  subject      = {Bauindustrie},
  language  = {en}
}
@article{FischerSteinhage1997,
  author    = {Fischer, A. and Steinhage, V.},
  title     = {Ein modellbasiertes Konzept zur st{\"a}dteplanerischen Kartierung durch digitale Bildanalyse},
  doi       = {10.25643/bauhaus-universitaet.487},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4870},
  year      = {1997},
  abstract  = {There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets},
  subject      = {Stadtplanung},
  language  = {de}
}
@inproceedings{Gasser2003,
  author    = {Gasser, Ingenuin},
  title     = {On A New One-Dimensional Model to Describe Tunnel Fires},
  doi       = {10.25643/bauhaus-universitaet.288},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2889},
  year      = {2003},
  abstract  = {We present a model derived to describe tunnel fires. The model originates in a compressible description of the air in the tunnel. It takes into account the strong buoyancy forces and at the same time the small Mach-number of the airflow. We comment on the derivation, on analytical results and on numerical simulations of the model. The model has been validated using data from real tunnel fire experiments. It shows good agreement with the real situation.},
  subject      = {Tunnel},
  language  = {en}
}
@inproceedings{GebbekenBaumhauerIonita2004,
  author    = {Gebbeken, Norbert and Baumhauer, Andreas and Ionita, Mihai},
  title     = {Increasing the Reliability and Performance through Automatization and Parallel Working},
  doi       = {10.25643/bauhaus-universitaet.139},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1397},
  year      = {2004},
  abstract  = {Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{GrigrievaLymarenko2003,
  author    = {Grigrieva, Polina and Lymarenko, Yulia},
  title     = {Mathematical modeling of nonlinear effects for vibrodiagnostics of fatigue cracks},
  doi       = {10.25643/bauhaus-universitaet.291},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2917},
  year      = {2003},
  abstract  = {The vibration control of complicated mechanical structures is impossible without proper mathematical models that allow to have a true apprehension of events occurring in structural member before the starting of the experiment and correct the diagnostic experiment in case of need. An approach that implies using of a discrete model reflecting all required features of a prototype system and permitting of an effective analytical and numerical investigation is proposed in the work. At first a discrete model of a bladed disk with flaw is considered. Taking into account the symmetry of the structure by utilization of mathematical tools of group presentation theory the number of degrees of freedom of the system is diminished. Small damage of the disk is regarded as perturbation of structure symmetry. The distinction of vibration characteristics such as natural frequencies and mode shapes of damaged and undamaged systems is determined theoretically with the help of perturbation theory and can be used as an effective diagnostic criterion of a small-scale damage of the structure. In the second part of the work a non-linear two-mass model of an acoustic emission in a damaged structure is proposed. On basis of the numerical integration of the nonlinear differential equations and expansion of the derived solution into a Fourier series free and forced vibrations of the model are investigated. It is shown that proposed model reflects all characteristic properties of vibrations of damaged structures: reduction of natural frequency, sub- and super-resonances, acoustic effects.},
  subject      = {Nichtlineare Mechanik},
  language  = {en}
}
@inproceedings{HahnWeitzmann2003,
  author    = {Hahn, Stephan and Weitzmann, R{\"u}diger},
  title     = {Nichtlineare Analyse von hybriden Konstruktionen unter Verwendung von selektiv gekoppelten Tragwerks- und Querschnittsmodellen},
  doi       = {10.25643/bauhaus-universitaet.302},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3026},
  year      = {2003},
  abstract  = {Bei der Untersuchung hybrider Strukturen kann eine Kopplung von Modellen unterschiedlicher Modellebenen vorteilhaft sein. Durch selektive Kopplung von Tragwerks- und Querschnittsmodellen in ausgew{\"a}hlten Bereichen der Konstruktion kann z.B. eine Verbesserung der Abbildungsgenauigkeit erzielt werden. Dadurch werden erweiterte Aussagen {\"u}ber das Querschnittstragverhalten in extrem beanspruchten Teilen des Tragwerks bei optionaler Skalierbarkeit des Modellumfangs m{\"o}glich. Im Beitrag werden ausgew{\"a}hlte Varianten der Modellbildung gegen{\"u}bergestellt und bewertet. Hierbei werden Aspekte der physikalischen Nichtlinearit{\"a}t von hybriden Konstruktionen insbesondere von Stahlbetonkonstruktionen ber{\"u}cksichtigt. Die Einbeziehung von Verfahren der mathematischen Optimierung in die Berechnungsstrategie erm{\"o}glicht die L{\"o}sung der zugrunde liegenden nichtlinearen Problemstellungen unter Vorgabe von Bemessungszielen und unter Beachtung von Grenzzustandsbedingungen.},
  subject      = {Tragwerk},
  language  = {de}
}
@inproceedings{HartmannMeissnerRueppel2004,
  author    = {Hartmann, Dietrich and Meißner, Udo F. and Rueppel, Uwe},
  title     = {Integration of Productmodel Databases into Multi-Agent Systems},
  doi       = {10.25643/bauhaus-universitaet.141},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1410},
  year      = {2004},
  abstract  = {This paper deals with two different agent-based approaches aimed at the incorporation of complex design information into multi-agent planning systems. The first system facilitates collaborative structural design processes, the second one supports fire engineering in buildings. Both approaches are part of two different research projects that belong to the DFG1 priority program 1103 entitled "Network-based Co-operative Planning Processes in Structural Engineering" (DFG 2000). The two approaches provide similar database wrapper agents to integrate relevant design information into two multi-agent systems: Database wrapper agents make the relevant product model data usable for further agents in the multi-agent system, independent on their physical location. Thus, database wrapper agents act as an interface between multi-agent system and heterogeneous database systems. The communication between the database wrapper agents and other requesting agents presumes a common vocabulary: a specific database ontology that maps database related message contents into database objects. Hereby, the software-wrapping technology enables the various design experts to plug in existing database systems and data resources into a specific multi-agent system easily. As a consequence, dynamic changes in the design information of large collaborative engineering projects are adequately supported. The flexible architecture of the database wrapper agent concept is demonstrated by the integration of an XML and a relational database system.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{Hartmann2004,
  author    = {Hartmann, Ulrich C.},
  title     = {Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator},
  doi       = {10.25643/bauhaus-universitaet.138},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1386},
  year      = {2004},
  abstract  = {A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{HauschildBorrmannHuebler2004,
  author    = {Hauschild, Thomas and Borrmann, Andr{\´e} and H{\"u}bler, Reinhard},
  title     = {Integration of Constraints into Digital Building Models for Cooperative Planning Processes},
  doi       = {10.25643/bauhaus-universitaet.177},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1775},
  year      = {2004},
  abstract  = {The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{HubeWittwer2003,
  author    = {Hube, Werner and Wittwer, Christof},
  title     = {Pr{\"a}diktive W{\"a}rmeflussregelung solaroptimierter Wohngeb{\"a}ude - Thermische Simulation komplexer Geb{\"a}ude},
  doi       = {10.25643/bauhaus-universitaet.310},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3106},
  year      = {2003},
  abstract  = {Moderne Wohngeb{\"a}ude heute, besonders aber die der Zukunft, werden sich zu einem großen Teil selbst mit W{\"a}rme versorgen. Hierbei spielen Entwicklungen im Bereich der Fassadenkonstruktionen eine zentrale Rolle. Zum erh{\"o}hten solaren W{\"a}rmeeintrag kommen die Eigenschaften der W{\"a}rmespeicherung und verz{\"o}gerten W{\"a}rmeabgabe hinzu. Aufgrund dieser Eigenschaften definiert sich das Geb{\"a}udeverhalten neu und komplexer. Im Rahmen der Entwicklungen von W{\"a}rmeflussregelungen in solarthermisch beheizten Wohngeb{\"a}uden mit neuartigen Fassaden wird in diesem Beitrag auf die Modellentwicklung moderner Fassadenkonstruktionen hinsichtlich Transparenter W{\"a}rmed{\"a}mmung und Phasenwechselmaterialien im Wandverbund, kombiniert mit der regelungstechnisch interessanten Neuentwicklung von Verschattungseinrichtungen {\"u}ber schaltbare Schichten am Fenster, eingegangen. Der Beitrag beschreibt den Entwurf eines Regelungskonzeptes f{\"u}r die thermische Raumklimaregelung. Diese Untersuchungen basieren auf komplexen Simulationsmodellen, wobei bei der Modellentwicklung der neuartigen Fassadenelemente auf reale Messwerte zur{\"u}ckgegriffen werden konnte.},
  subject      = {Haus},
  language  = {de}
}
@inproceedings{Huhnt2000,
  author    = {Huhnt, Wolfgang},
  title     = {Modellierung der Prozesse als Basis der Informationssysteme f{\"u}r Bauunternehmen},
  doi       = {10.25643/bauhaus-universitaet.596},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5969},
  year      = {2000},
  abstract  = {Die fachlichen Grundlagen der Aufgaben, die in einem Bauunternehmen zu bearbeiten sind, wurden in verschiedenen Disziplinen entwickelt. Maßgeblich waren der Baubetrieb und die Betriebswirtschaftslehre. Die parallele Entwicklung hat jedoch dazu gef{\"u}hrt, dass grundlegende Begriff und Verfahren zwischen den Disziplinen nicht aufeinander abgestimmt sind. Die verschiedenen Aufgaben beeinflussen jedoch einander. Innerhalb der jeweiligen Disziplin wurden Informationssysteme entwickelt, mit denen sich die Aufgaben aus der jeweiligen Disziplin bearbeiten lassen. Zur Verbindung der "verschiedenen Welten" existieren zwar ausgew{\"a}hlte Schnittstellen, eine durchg{\"a}ngige verteilte Bearbeitung der verschiedenen Aufgaben wird jedoch noch nicht umfassend unterst{\"u}tzt. Im vorliegenden Beitrag wird ein Vorgehen vorgestellt, auf dessen Grundlage eine verteilte Bearbeitung der fachgebiets{\"u}bergreifenden Aufgaben erfolgen kann. Das Vorgehen beruht auf der Modellierung der Prozesse sowie der zur Bearbeitung der als Bestandteil der Prozesse spezifizierten Aufgaben ben{\"o}tigten Informationen. Dieses Modell wird auf der Grundlage der Mengenlehre mit einem entsprechenden Werkzeug aufgebaut. Die Spezifikation der Informationen wird genutzt, um Datenbankschemata zu generieren, die Spezifikation der Aufgaben wird genutzt, um Werkzeuge zur Bearbeitung zu identifizieren. Diese Werkzeuge sind in Java als Applets implementiert und k{\"o}nnen {\"u}ber entsprechende Treiber auf die Datenbanken zugreifen. Das Prozessmodell wird in einem n{\"a}chsten Schritt erweitert. Personen werden eingef{\"u}hrt. Diesen Personen werden Aufgaben zugewiesen, deren Bearbeitung sie ausf{\"u}hren sollen. Auf der Grundlage des erweiterten Prozessmodells werden die Applets, die eine Person ben{\"o}tigt, auf einer entsprechenden Internet-Seite zusammengestellt. Damit kann projektspezifisch ein Informationssystem zusammengestellt werden, das eine verteilte Bearbeitung der verschiedenartigen Aufgaben unterst{\"u}tzt.},
  subject      = {Baubetrieb},
  language  = {de}
}
@inproceedings{HuebnerWalhornKoelke2003,
  author    = {H{\"u}bner, Bj{\"o}rn and Walhorn, Elmar and K{\"o}lke, Andreas},
  title     = {Simultane L{\"o}sung gekoppelter Struktur-Fluid-Systeme},
  doi       = {10.25643/bauhaus-universitaet.311},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3114},
  year      = {2003},
  abstract  = {Ein simultanes L{\"o}sungsverfahren f{\"u}r Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizit{\"a}tstheorie in total Lagrangescher Formulierung. Die Str{\"o}mung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberfl{\"a}chen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode f{\"u}hrt zu einem konsistenten Berechnungsmodell f{\"u}r das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung {\"a}ndern k{\"o}nnen, erlaubt die Methode eine nat{\"u}rliche Beschreibung des infolge der Strukturbewegung zeitver{\"a}nderlichen Str{\"o}mungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten f{\"u}r die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgew{\"a}hlte Anwendungsbeispiele zeigen die Leistungsf{\"a}higkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen L{\"o}sungsverfahrens.},
  subject      = {Bauwerk},
  language  = {de}
}
@article{KazakevitchKulyabkoDubichvost1997,
  author    = {Kazakevitch, M. I. and Kulyabko, V. V. and Dubichvost, A. A.},
  title     = {The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads},
  doi       = {10.25643/bauhaus-universitaet.521},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5219},
  year      = {1997},
  abstract  = {In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.},
  subject      = {Verbundtragwerk},
  language  = {en}
}
@inproceedings{KirichukKoeppler1997,
  author    = {Kirichuk, A. and K{\"o}ppler, H.},
  title     = {Numerical Algorithms and Computer Modeling for nonlinear Analysis of Shell Structures},
  doi       = {10.25643/bauhaus-universitaet.438},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4382},
  year      = {1997},
  abstract  = {The dynamic behaviour of shells, which are widely used in construction and mechanical engineering as critical components of machinery and 3-D structures, under static and dynamic loadings is described by system of deep nonlinear differential equations. Solution of these equations can be received with assistance of technique basing on a modern numerical algorithms and computer modeling.. The system of nonlinear differential equations of vibration of the shells is proposed taking into account the inertia forces in the tangential and normal directions. Its solution is based on combination of parameter prolongation method, finite-difference method and the Newton-Kantorovich iterative algorithm that allows plotting the loading trajectories and determination of bifurcation points on them. Package of Applied Programs >SEVSOR< is a computation means to be used in research of deformation, stability and vibration in thin axically-symmetric shells of complicated shape Input data include information on shell geometry, physical and mechanical properties, bearing conditions, types of loadings and load application. Frame output of motion forms in real time or either in decelerated or accelerated time scales for creating cartoons or video films is used for analysis of the compound dynamic processes in shell-type structures.},
  subject      = {Schale},
  language  = {en}
}