@inproceedings{HartmannAlsaadVoelker,
  author    = {Hartmann, Maria and Alsaad, Hayder and V{\"o}lker, Conrad},
  title     = {Das Potential von Fassadenbegr{\"u}nungen zur Verringerung des W{\"a}rmeinseleffekts: Simulation eines Beispielquartiers},
  series = {Bauphysiktage Kaiserslautern 2022},
  booktitle = {Bauphysiktage Kaiserslautern 2022},
  address   = {Kaiserslautern},
  isbn      = {978-3-95974-176-7},
  issn      = {2363-8206},
  doi       = {10.25643/bauhaus-universitaet.4667},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220713-46676},
  pages     = {147-149},
  abstract  = {Die Auswirkungen einer Fassadenbegr{\"u}nung auf den W{\"a}rmeinseleffekt in Stuttgart wurde f{\"u}r eine Hitzeperiode numerisch simuliert und bewertet. Die Ergebnisse zeigten positive Auswirkungen innerhalb des Simulationsgebiets sowie eine geringe Fernwirkung auf benachbarte Stadtquartiere. Diese {\"A}nderungen k{\"o}nnen zur Verbesserung des thermischen Komforts im Außenraum beitragen. Eine reduzierte Temperatur der Außenoberfl{\"a}che f{\"u}hrt dar{\"u}ber hinaus auch zu einer geringeren Oberfl{\"a}chentemperatur der Wandinnenseite, welche die Innenraumtemperatur beeinflusst. Folglich kann die thermische Behaglichkeit auch im Innenraum erh{\"o}ht werden.},
  subject      = {Mikroklima},
  language  = {de}
}
@article{VoelkerAlsaad,
  author    = {V{\"o}lker, Conrad and Alsaad, Hayder},
  title     = {Simulating the human body's microclimate using automatic coupling of CFD and an advanced thermoregulation model},
  series = {Indoor Air},
  volume    = {2018},
  journal   = {Indoor Air},
  number    = {28, Heft 3},
  doi       = {10.25643/bauhaus-universitaet.3851},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190218-38517},
  pages     = {415 -- 425},
  abstract  = {This study aims to develop an approach to couple a computational fluid dynamics (CFD) solver to the University of California, Berkeley (UCB) thermal comfort model to accurately evaluate thermal comfort. The coupling was made using an iterative JavaScript to automatically transfer data for each individual segment of the human body back and forth between the CFD solver and the UCB model until reaching convergence defined by a stopping criterion. The location from which data are transferred to the UCB model was determined using a new approach based on the temperature difference between subsequent points on the temperature profile curve in the vicinity of the body surface. This approach was used because the microclimate surrounding the human body differs in thickness depending on the body segment and the surrounding environment. To accurately simulate the thermal environment, the numerical model was validated beforehand using experimental data collected in a climate chamber equipped with a thermal manikin. Furthermore, an example of the practical implementations of this coupling is reported in this paper through radiant floor cooling simulation cases, in which overall and local thermal sensation and comfort were investigated using the coupled UCB model.},
  subject      = {Numerische Str{\"o}mungssimulation},
  language  = {en}
}
@article{VoelkerMaempelKornadt,
  author    = {V{\"o}lker, Conrad and M{\"a}mpel, Silvio and Kornadt, Oliver},
  title     = {Measuring the human body's micro-climate using a thermal manikin},
  series = {Indoor Air},
  journal   = {Indoor Air},
  number    = {24, 6},
  doi       = {10.25643/bauhaus-universitaet.3815},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181025-38153},
  pages     = {567 -- 579},
  abstract  = {The human body is surrounded by a micro-climate which results from its convective release of heat. In this study, the air temperature and flow velocity of this micro-climate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the micro-climate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the micro-climate shape strongly depends not only on the body segment, but also on boundary conditions: the higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the air flow in the micro-climate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient.},
  subject      = {Raumklima},
  language  = {en}
}