@article{MostEckardt2004,
  author    = {Most, Thomas and Eckardt, Stefan},
  title     = {Application of a hybrid parallelization technique to accelerate the numerical simulation of nonlinear mechanical problems},
  doi       = {10.25643/bauhaus-universitaet.259},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2599},
  year      = {2004},
  abstract  = {This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique.},
  subject      = {Framework <Informatik>},
  language  = {en}
}
@article{PalaneeswaranKumaraswamyNg2004,
  author    = {Palaneeswaran, Ekambaram and Kumaraswamy, Mohan and Ng, Thomas},
  title     = {Knowledge Management for Small and Medium Contractors},
  doi       = {10.25643/bauhaus-universitaet.258},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2582},
  year      = {2004},
  abstract  = {Effective knowledge management is increasingly considered as a cornerstone of sustainable business success. Knowledge management systems are strategically valuable for both ensuring consistency and continuous improvement of various aspects such as quality delivery, productivity and competitiveness. The small and medium enterprises (SMEs) in the construction industry are mostly operating under tighter timeframes, narrower profit margins and more constrained resources. Hence the recently commenced SMILE-SMC (Strategic Management with Information Leveraged Excellece for Small and Medium Contractors) project aims to support the information and knowledge management needs of the small and medium contractors in Hong Kong. This paper presents some snapshots on the SMILE-SMC project, and its conceptualized deliverables with some highlights of recent developments.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@article{ZavadskasKaklauskas2004,
  author    = {Zavadskas, Edmundas Kazimieras and Kaklauskas, Arturas},
  title     = {Civil Engineering Decision Support Systems in Lithuania},
  doi       = {10.25643/bauhaus-universitaet.257},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2579},
  year      = {2004},
  abstract  = {Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@article{YabukiYoshimura2004,
  author    = {Yabuki, Nobuyoshi and Yoshimura, Yutaka},
  title     = {An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps},
  doi       = {10.25643/bauhaus-universitaet.256},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2564},
  year      = {2004},
  abstract  = {This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@article{KaapkeMilbradt2004,
  author    = {Kaapke, Kai and Milbradt, Peter},
  title     = {Voronoi-based finite volume method for transport problems},
  doi       = {10.25643/bauhaus-universitaet.255},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2558},
  year      = {2004},
  abstract  = {Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KeJianMing2004,
  author    = {Ke, Chen and Jian Ming, Lu},
  title     = {Study of Analysis System for Bridge Test},
  doi       = {10.25643/bauhaus-universitaet.254},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2547},
  year      = {2004},
  abstract  = {Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{GalffyWellmannJelicHartmann2004,
  author    = {Galffy, Mozes and Wellmann Jelic, Andres and Hartmann, Dietrich},
  title     = {Lifetime-oriented modelling of vortex-induced across-wind vibrations on bridge tie rods},
  doi       = {10.25643/bauhaus-universitaet.253},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2536},
  year      = {2004},
  abstract  = {The influence of vortex-induces vibrations on vertical tie rods has been proved as a determinant load factor in the lifetime-oriented dimensioning of arched steel bridges. Particularly, the welded connection plates between the suspenders and the arches often exhibit cracks induced primarily rods. In this context, the synchronization of the vortex-shedding to the rod motion in a critical wind velocity range, the so-called lock-in effect, is of essential interest.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MilbradtSchierbaumSchwoeppe2004,
  author    = {Milbradt, Peter and Schierbaum, Jochen and Schw{\"o}ppe, Axel},
  title     = {Finite Cell-Elements of Higher Order},
  doi       = {10.25643/bauhaus-universitaet.252},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2524},
  year      = {2004},
  abstract  = {The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KwakKim2004,
  author    = {Kwak, Hyo-Gyoung and Kim, Jin-Kook},
  title     = {Efficient Shoring System in RC Frame Structures},
  doi       = {10.25643/bauhaus-universitaet.251},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2511},
  year      = {2004},
  abstract  = {In this paper, systematic analyses for the shoring systems installed to support the applied loads during construction are performed on the basis of the numerical approach. On the basis of a rigorous time-dependent analysis, structural behaviors of reinforced concrete (RC) frame structures according to the changes in design variables such as the types of shoring systems, shore stiffness and shore spacing are analyzed and discussed. The time-dependent deformations of concrete such as creep and shrinkage and construction sequences of frame structures are also taken into account to minimize the structural instability and to reach to an improved design of shoring system because these effects may increase the axial forces delivered to the shores. In advance, the influence of the column shortening effect, generally mentioned in a tall building structure, is analyzed. From many parametric studies, it has been finally concluded that the most effective shoring system in RC frame structures is 2S1R (two shores and one reshore) regardless of the changes in design variables.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{PickHeimsundMilbradt2004,
  author    = {Pick, Tobias and Heimsund, Bjoern-Ove and Milbradt, Peter},
  title     = {Development and Analysis of Sparse Matrix Concepts for Finite Element Approximation on general Cells},
  doi       = {10.25643/bauhaus-universitaet.250},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2500},
  year      = {2004},
  abstract  = {In engineering and computing, the finite element approximation is one of the most well-known computational solution techniques. It is a great tool to find solutions for mechanic, fluid mechanic and ecological problems. Whoever works with the finite element method will need to solve a large system of linear equations. There are different ways to find a solution. One way is to use a matrix decomposition technique such as LU or QR. The other possibility is to use an iterative solution algorithm like Conjugate Gradients, Gauß-Seidel, Multigrid Methods, etc. This paper will focus on iterative solvers and the needed storage techniques...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KaklauskasCervenkaCervenka2004,
  author    = {Kaklauskas, Gintaris and Cervenka, Vladimir and Cervenka, Jan},
  title     = {Deflection Calculation of RC Beams: Finite Element Software versus Design Code Methods},
  doi       = {10.25643/bauhaus-universitaet.249},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2498},
  year      = {2004},
  abstract  = {The paper investigates accuracy of deflection predictions made by the finite element package ATENA and design code methods ACI and EC2. Deflections have been calculated for a large number of experimental reinforced concrete beams reported by three investigators. Statistical parameters have been established for each of the technique at different load levels, separately for the beams with small and moderate reinforcement ratio.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MelnikovSemenov2004,
  author    = {Melnikov, B. E. and Semenov, Artem},
  title     = {Application of Multimodel Method of Elasto-Plastic Analysis for the Multilevel Computation of Structures},
  doi       = {10.25643/bauhaus-universitaet.248},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2487},
  year      = {2004},
  abstract  = {Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{LeeLee2004,
  author    = {Lee, Kangkun and Lee, Kijang},
  title     = {Additional bending moment for shear-lag phenomenon in tube structures},
  doi       = {10.25643/bauhaus-universitaet.247},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2472},
  year      = {2004},
  abstract  = {Framed-tube system with multiple internal tubes is analysed using an orthotropic box beam analogy approach in which each tube is individually modelled by a box beam that accounts for the flexural and shear deformations, as well as the shear-lag effects. A simple numerical modeling technique is proposed for estimating the shear-lag phenomenon in tube structures with multiple internal tubes. The proposed method idealizes the framed-tube structures with multiple internal tubes as equivalent multiple tubes, each composed of four equivalent orthotropic plate panels. The numerical analysis is based on the minimum potential energy principle in conjunction with the variational approach. The shear-lag phenomenon of such structures is studied taking into account the additional bending moments in the tubes. A detailed work is carried out through the numerical analysis of the additional bending moment. The moment factor is further introduced to identify the shear lag phenomenon along with the additional moment.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MironovPahl2004,
  author    = {Mironov, Vadim and Pahl, Peter Jan},
  title     = {A Prismatic Finite Element for Accurate Arch Dam Analysis},
  doi       = {10.25643/bauhaus-universitaet.246},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2467},
  year      = {2004},
  abstract  = {The displacements and stresses in arch dams and their abutments are frequently determined with 20-node brick elements. The elements are distorted near the contact plane between the wall and the abutment. A cantilever beam testbed has been developed to investigate the consequences of this distortion. It is shown that the deterioration of the accuracy in the computed stresses is significant. A compatible 18-node wedge element with linear stress variation is developed as an alternative to the brick element. The shape of this element type is readily adapted to the shape of the contact plane. It is shown that the accuracy of the computed stresses in the vicinity of the contact plane is improved significantly by the use of wedge elements.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{NohPark2004,
  author    = {Noh, Jung-Hwi and Park, Jong-Heon},
  title     = {A Calculation of Initial Cable Force for Ko-Ha Grand Bridge},
  doi       = {10.25643/bauhaus-universitaet.245},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2459},
  year      = {2004},
  abstract  = {The primary objective of initial shape analysis of a cable stayed bridge is to calculate initial installation cable tension forces and to evaluate fabrication camber of main span and pylon providing the final longitudinal profile of the bridge at the end of construction. In addition, the initial cable forces depending on the alternation of the bridge's shape can be obtained from the analysis, and will be used to provide construction safety during construction. In this research, we conducted numerical experiments for initial shape of Ko-ha bridge, which will be constructed in the near future, using three different typical methods such as continuous beam method, linear truss method, and IIMF (Introducing Initial Member Force) method},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{SemenovAlekseevaTarlapan2004,
  author    = {Semenov, Vitaly and Alekseeva, Elena and Tarlapan, Oleg},
  title     = {Virtual Construction using Map-based Approach},
  doi       = {10.25643/bauhaus-universitaet.244},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2447},
  year      = {2004},
  abstract  = {The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{RombergNigglvanTreeck2004,
  author    = {Romberg, Richard and Niggl, Andreas and van Treeck, Christoph},
  title     = {Structural Analysis based on the Product Model Standard IFC},
  doi       = {10.25643/bauhaus-universitaet.243},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2433},
  year      = {2004},
  abstract  = {In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KiviniemiFischer2004,
  author    = {Kiviniemi, Arto and Fischer, Martin},
  title     = {Requirements Management Interface to Building Product Models},
  doi       = {10.25643/bauhaus-universitaet.242},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2427},
  year      = {2004},
  abstract  = {In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{HoltzhauerSaal2004,
  author    = {Holtzhauer, Eric and Saal, Helmut},
  title     = {Product modelling in the steel construction domain},
  doi       = {10.25643/bauhaus-universitaet.241},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2415},
  year      = {2004},
  abstract  = {The complexity of the relationships between the actors of a building project requires high efficiency in communication. Among other things, data sharing is crucial. The exchange of data is made possible by interfaces between expert programs, which rely on product models. The latter are neutral standards with formal definitions of building objects and their attributes. This paper deals with the state of the art and the research activities concerning product models in the steel construction domain and the advantages provided by this technology for the sector.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KangMiranda2004,
  author    = {Kang, Shihchung and Miranda, Eduardo},
  title     = {Physics Based Model for Simulating the Dynamics of Tower Cranes},
  doi       = {10.25643/bauhaus-universitaet.240},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2409},
  year      = {2004},
  abstract  = {The goal of the research is to increase the understanding of dynamic behaviors during the crane operation, and develops computer-aided methods to improve the training of crane operators. There are approximately 125,000 cranes in operation today in the construction industry, responsible for major portion of erection activities. Unfortunately, many accidents occur every year in the U.S. and other countries related to the operation of cranes in construction sites. For example on November 28, 1989 a tower crane collapse during the construction of a building in San Francisco killing four construction workers, one civilian and injuring 28. According to the statistics from Occupational Safety Health Administration (OSHA), there were 137 crane-related fatalities from 1992 to 2001 in the US. A well-known internet website that keeps track of crane-related accidents (craneaccidents.com), reports 516 accidents and 277 fatalities from 2000 to 2002. These statistics show that even though many measures have been taken to decrease the number of crane-related accidents (Braam, 2002), the number of crane related accidents is still very large. It is important to recognize that each construction related fatality is not only a great human loss but also increases the costs of insurance, lawsuits, and the construction budget due to delay of a project (Paulson 1992)...},
  subject      = {Produktmodell},
  language  = {en}
}