@article{BandJanizadehChandraPaletal., author = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Saha, Asish and Chakrabortty, Rabbin and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Novel Ensemble Approach of Deep Learning Neural Network (DLNN) Model and Particle Swarm Optimization (PSO) Algorithm for Prediction of Gully Erosion Susceptibility}, series = {Sensors}, volume = {2020}, journal = {Sensors}, number = {Volume 20, issue 19, article 5609}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s20195609}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43341}, pages = {1 -- 27}, abstract = {This study aims to evaluate a new approach in modeling gully erosion susceptibility (GES) based on a deep learning neural network (DLNN) model and an ensemble particle swarm optimization (PSO) algorithm with DLNN (PSO-DLNN), comparing these approaches with common artificial neural network (ANN) and support vector machine (SVM) models in Shirahan watershed, Iran. For this purpose, 13 independent variables affecting GES in the study area, namely, altitude, slope, aspect, plan curvature, profile curvature, drainage density, distance from a river, land use, soil, lithology, rainfall, stream power index (SPI), and topographic wetness index (TWI), were prepared. A total of 132 gully erosion locations were identified during field visits. To implement the proposed model, the dataset was divided into the two categories of training (70\%) and testing (30\%). The results indicate that the area under the curve (AUC) value from receiver operating characteristic (ROC) considering the testing datasets of PSO-DLNN is 0.89, which indicates superb accuracy. The rest of the models are associated with optimal accuracy and have similar results to the PSO-DLNN model; the AUC values from ROC of DLNN, SVM, and ANN for the testing datasets are 0.87, 0.85, and 0.84, respectively. The efficiency of the proposed model in terms of prediction of GES was increased. Therefore, it can be concluded that the DLNN model and its ensemble with the PSO algorithm can be used as a novel and practical method to predict gully erosion susceptibility, which can help planners and managers to manage and reduce the risk of this phenomenon.}, subject = {Geoinformatik}, language = {en} } @article{ReichertOlneyLahmer, author = {Reichert, Ina and Olney, Peter and Lahmer, Tom}, title = {Combined approach for optimal sensor placement and experimental verification in the context of tower-like structures}, series = {Journal of Civil Structural Health Monitoring}, volume = {2021}, journal = {Journal of Civil Structural Health Monitoring}, number = {volume 11}, publisher = {Heidelberg}, address = {Springer}, doi = {10.1007/s13349-020-00448-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44701}, pages = {223 -- 234}, abstract = {When it comes to monitoring of huge structures, main issues are limited time, high costs and how to deal with the big amount of data. In order to reduce and manage them, respectively, methods from the field of optimal design of experiments are useful and supportive. Having optimal experimental designs at hand before conducting any measurements is leading to a highly informative measurement concept, where the sensor positions are optimized according to minimal errors in the structures' models. For the reduction of computational time a combined approach using Fisher Information Matrix and mean-squared error in a two-step procedure is proposed under the consideration of different error types. The error descriptions contain random/aleatoric and systematic/epistemic portions. Applying this combined approach on a finite element model using artificial acceleration time measurement data with artificially added errors leads to the optimized sensor positions. These findings are compared to results from laboratory experiments on the modeled structure, which is a tower-like structure represented by a hollow pipe as the cantilever beam. Conclusively, the combined approach is leading to a sound experimental design that leads to a good estimate of the structure's behavior and model parameters without the need of preliminary measurements for model updating.}, subject = {Strukturmechanik}, language = {en} } @article{SchirmerOsburg, author = {Schirmer, Ulrike and Osburg, Andrea}, title = {A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study}, series = {SN Applied Sciences}, volume = {2020}, journal = {SN Applied Sciences}, number = {Volume 2, article 2061}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42452-020-03825-5}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44729}, pages = {1 -- 11}, abstract = {The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG-MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG-MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower.}, subject = {Zement}, language = {en} } @article{DokhanchiArnoldVogeletal.2020, author = {Dokhanchi, Najmeh Sadat and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Measurement of indoor air temperature distribution using acoustic travel-time tomography: Optimization of transducers location and sound-ray coverage of the room}, series = {Measurement}, volume = {2020}, journal = {Measurement}, number = {Volume 164, article 107934}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.measurement.2020.107934}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220524-46473}, year = {2020}, abstract = {Acoustic travel-time TOMography (ATOM) allows the measurement and reconstruction of air temperature distributions. Due to limiting factors, such as the challenge of travel-time estimation of the early reflections in the room impulse response, which heavily depends on the position of transducers inside the measurement area, ATOM is applied mainly outdoors. To apply ATOM in buildings, this paper presents a numerical solution to optimize the positions of transducers. This optimization avoids reflection overlaps, leading to distinguishable travel-times in the impulse response reflectogram. To increase the accuracy of the measured temperature within tomographic voxels, an additional function is employed to the proposed numerical method to minimize the number of sound-path-free voxels, ensuring the best sound-ray coverage of the room. Subsequently, an experimental set-up has been performed to verify the proposed numerical method. The results indicate the positive impact of the optimal positions of transducers on the distribution of ATOM-temperatures.}, subject = {Bauphysik}, language = {en} } @article{CerejeirasKaehlerLegatiuketal., author = {Cerejeiras, Paula and K{\"a}hler, Uwe and Legatiuk, Anastasiia and Legatiuk, Dmitrii}, title = {Discrete Hardy Spaces for Bounded Domains in Rn}, series = {Complex Analysis and Operator Theory}, volume = {2021}, journal = {Complex Analysis and Operator Theory}, number = {Volume 15, article 4}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s11785-020-01047-6}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44746}, pages = {1 -- 32}, abstract = {Discrete function theory in higher-dimensional setting has been in active development since many years. However, available results focus on studying discrete setting for such canonical domains as half-space, while the case of bounded domains generally remained unconsidered. Therefore, this paper presents the extension of the higher-dimensional function theory to the case of arbitrary bounded domains in Rn. On this way, discrete Stokes' formula, discrete Borel-Pompeiu formula, as well as discrete Hardy spaces for general bounded domains are constructed. Finally, several discrete Hilbert problems are considered.}, subject = {Dirac-Operator}, language = {en} } @article{BecherVoelkerRodehorstetal., author = {Becher, Lia and V{\"o}lker, Conrad and Rodehorst, Volker and Kuhne, Michael}, title = {Background-oriented schlieren technique for two-dimensional visualization of convective indoor air flows}, series = {Optics and Lasers in Engineering}, volume = {2020}, journal = {Optics and Lasers in Engineering}, number = {Volume 134, article 106282}, doi = {https://doi.org/10.1016/j.optlaseng.2020.106282}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220810-46972}, pages = {9}, abstract = {This article focuses on further developments of the background-oriented schlieren (BOS) technique to visualize convective indoor air flow, which is usually defined by very small density gradients. Since the light rays deflect when passing through fluids with different densities, BOS can detect the resulting refractive index gradients as integration along a line of sight. In this paper, the BOS technique is used to yield a two-dimensional visualization of small density gradients. The novelty of the described method is the implementation of a highly sensitive BOS setup to visualize the ascending thermal plume from a heated thermal manikin with temperature differences of minimum 1 K. To guarantee steady boundary conditions, the thermal manikin was seated in a climate laboratory. For the experimental investigations, a high-resolution DLSR camera was used capturing a large field of view with sufficient detail accuracy. Several parameters such as various backgrounds, focal lengths, room air temperatures, and distances between the object of investigation, camera, and structured background were tested to find the most suitable parameters to visualize convective indoor air flow. Besides these measurements, this paper presents the analyzing method using cross-correlation algorithms and finally the results of visualizing the convective indoor air flow with BOS. The highly sensitive BOS setup presented in this article complements the commonly used invasive methods that highly influence weak air flows.}, subject = {Raumklima}, language = {en} } @phdthesis{Javanmardi, author = {Javanmardi, Leila}, title = {URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979}, doi = {10.25643/bauhaus-universitaet.4597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220224-45971}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universit{\"a}t Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio-political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.}, subject = {Stadtplanung}, language = {en} } @article{SeichterNesslerKnopf, author = {Seichter, Cosima Zita and Neßler, Miriam and Knopf, Paul}, title = {Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes}, series = {Movements. Journal for Critical Migration and Border Regime Studies}, volume = {2020}, journal = {Movements. Journal for Critical Migration and Border Regime Studies}, number = {Volume 5, Issue 1}, address = {G{\"o}ttingen}, doi = {10.25643/bauhaus-universitaet.4480}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44807}, pages = {1 -- 9}, abstract = {The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union.}, subject = {Europ{\"a}ische Union}, language = {en} } @incollection{ThamerTurnheim, author = {Thamer, Florian and Turnheim, Tina}, title = {INTRAAKTIVE THEATERLABORE - Theater der Sorge im Setting des ZRM3000}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4261}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42610}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {233 -- 269}, abstract = {das Theater der sorge ist konzipiert als 3-Phasen-modell: in der 1. Phase geht es um die hersTellung einer laborsituation, in der pr{\"a}figurative lebens-, denk- und arbeitsformen in diskursiver und spielerischer weise pr{\"a}sentisch erprobt und in konstituierende Prozesse {\"u}bertragen werden k{\"o}nnen; in der 2. Phase geht es um die gemeinschaftliche Konzeption, Vorbereitung und durchf{\"u}hrung einer das labor abschließenden {\"o}ffentlichen auFsTellung, die auf den kollektiven erfahrungen und ergebnissen der labore basiert. dadurch k{\"o}nnen gesellschaftliche resonanzen erzeugt und die konstituierenden Prozesse vorl{\"a}ufig instituiert werden. in der 3.Phase geht es dann darum, Vorbereitung: alle inhaltlichen erkenntnisse und {\"a}sthetischen Versuche in eine wiederholbare Theaterinszenierung / Performance zu {\"u}berf{\"u}hren. die n{\"o}tigen Voraussetzungen und bedingungen f{\"u}r diese von uns Vorstellungen genannten Formate sind f{\"u}r die hier verhandelte Fragestellung nicht von bedeutung - respektive w{\"u}rden sie den vorhandenen rahmen {\"u}berschreiten - daher sparen wir diesen Komplex an dieser stelle aus.}, subject = {Theater}, language = {de} } @article{WolfLondong, author = {Wolf, Mario and Londong, J{\"o}rg}, title = {Transformation der Siedlungswasserwirtschaft - Steuerungsmechanismen im Diskurs ressourcenorientierter Systemans{\"a}tze am Beispiel von Th{\"u}ringen}, series = {Raumforschung und Raumordnung}, volume = {2020}, journal = {Raumforschung und Raumordnung}, number = {Band 78, Heft 4}, publisher = {Sciendo}, doi = {10.2478/rara-2020-0012}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42731}, pages = {397 -- 411}, abstract = {Neuartige Sanit{\"a}rsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilstr{\"o}men. In den Fach{\"o}ffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanit{\"a}rsysteme als ein geeigneter Ansatz f{\"u}r die zuk{\"u}nftige Sicherung der Abwasserentsorgung in l{\"a}ndlichen R{\"a}umen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch f{\"u}r Abwasserentsorger vielf{\"a}ltige Risiken die Einf{\"u}hrung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanit{\"a}rsystems im l{\"a}ndlichen Raum Th{\"u}ringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einf{\"u}hrung von ressourcenorientierten Systemans{\"a}tzen unterst{\"u}tzt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einf{\"u}hrung innovativer L{\"o}sungsans{\"a}tze, eine Erl{\"a}uterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsans{\"a}tzen,mit denen die Einf{\"u}hrung von neuartigen Sanit{\"a}rsystemen gef{\"o}rdert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanit{\"a}rsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist.}, subject = {Raumordnung}, language = {de} } @article{HarirchianKumariJadhavetal., author = {Harirchian, Ehsan and Kumari, Vandana and Jadhav, Kirti and Raj Das, Rohan and Rasulzade, Shahla and Lahmer, Tom}, title = {A Machine Learning Framework for Assessing Seismic Hazard Safety of Reinforced Concrete Buildings}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7153}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207153}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42744}, pages = {18}, abstract = {Although averting a seismic disturbance and its physical, social, and economic disruption is practically impossible, using the advancements in computational science and numerical modeling shall equip humanity to predict its severity, understand the outcomes, and equip for post-disaster management. Many buildings exist amidst the developed metropolitan areas, which are senile and still in service. These buildings were also designed before establishing national seismic codes or without the introduction of construction regulations. In that case, risk reduction is significant for developing alternatives and designing suitable models to enhance the existing structure's performance. Such models will be able to classify risks and casualties related to possible earthquakes through emergency preparation. Thus, it is crucial to recognize structures that are susceptible to earthquake vibrations and need to be prioritized for retrofitting. However, each building's behavior under seismic actions cannot be studied through performing structural analysis, as it might be unrealistic because of the rigorous computations, long period, and substantial expenditure. Therefore, it calls for a simple, reliable, and accurate process known as Rapid Visual Screening (RVS), which serves as a primary screening platform, including an optimum number of seismic parameters and predetermined performance damage conditions for structures. In this study, the damage classification technique was studied, and the efficacy of the Machine Learning (ML) method in damage prediction via a Support Vector Machine (SVM) model was explored. The ML model is trained and tested separately on damage data from four different earthquakes, namely Ecuador, Haiti, Nepal, and South Korea. Each dataset consists of varying numbers of input data and eight performance modifiers. Based on the study and the results, the ML model using SVM classifies the given input data into the belonging classes and accomplishes the performance on hazard safety evaluation of buildings.}, subject = {Erdbeben}, language = {en} } @incollection{Schnurbein, author = {Schnurbein, Stefanie von}, title = {Mehr als Anerkennung. Das Schreiblabor als Resonanzraum und Assemblage}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42656}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {141 -- 164}, abstract = {Ein "how to" von Schreibtechniken f{\"u}r Seminare und Kolloquien.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @article{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Der K{\"u}hlungseffekt der personalisierten L{\"u}ftung}, series = {Bauphysik}, volume = {2020}, journal = {Bauphysik}, number = {volume 42, issue 5}, publisher = {Ernst \& Sohn bei John Wiley \& Sons}, address = {Hoboken}, doi = {10.25643/bauhaus-universitaet.4272}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201020-42723}, pages = {218 -- 225}, abstract = {Personalisierte L{\"u}ftung (PL) kann die thermische Behaglichkeit sowie die Qualit{\"a}t der eingeatmeten Atemluft verbessern, in dem jedem Arbeitsplatz Frischluft separat zugef{\"u}hrt wird. In diesem Beitrag wird die Wirkung der PL auf die thermische Behaglichkeit der Nutzer unter sommerlichen Randbedingungen untersucht. Hierf{\"u}r wurden zwei Ans{\"a}tze zur Bewertung des K{\"u}hlungseffekts der PL untersucht: basierend auf (1) der {\"a}quivalenten Temperatur und (2) dem thermischen Empfinden. Grundlage der Auswertung sind in einer Klimakammer gemessene sowie numerisch simulierte Daten. Vor der Durchf{\"u}hrung der Simulationen wurde das numerische Modell zun{\"a}chst anhand der gemessenen Daten validiert. Die Ergebnisse zeigen, dass der Ansatz basierend auf dem thermischen Empfinden zur Evaluierung des K{\"u}hlungseffekts der PL sinnvoller sein kann, da bei diesem die komplexen physiologischen Faktoren besser ber{\"u}cksichtigt werden.}, subject = {L{\"u}ftung}, language = {de} } @incollection{Egert, author = {Egert, Gerko}, title = {Radikale Planung}, series = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4262}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42628}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {105 -- 118}, abstract = {Radikal Planen kann jede*r. Im Seminar, in der Lesegruppe, bei der Probe, im Studio, bei der politischen Aktion, bei der Textlekt{\"u}re. Man braucht nicht viel - nur viele. Denn planen macht man nicht allein. Eine Gruppe sind viele, Kommilitonen*innen wie Freund*innen, K{\"u}nstler*innen und Genoss*innen…}, subject = {Theater}, language = {de} } @misc{MacielCostadaSilva, type = {Master Thesis}, author = {Maciel Costa da Silva, Luiza}, title = {Smart Cities and Mobility Stations: Lessons learned from the Smarter Together in Vienna and Munich}, doi = {10.25643/bauhaus-universitaet.4270}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201012-42702}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {110}, abstract = {With an increasing urban population and urban problems arising from this unplanned growth, several projects aimed at promoting sustainable urban development have emerged. Smart mobility strategies, such as shared mobility and mobility stations, represent some of the solutions to promote changes in travel behavior. Despite its beneficial impacts, however, the implementation of such infrastructure is criticized for not contributing to current urban issues, as well as often disregarding knowledge about urban space and its functioning. In this context, the Smarter Together, a joint research and innovation project funded through the European Union program H2020, was implemented. The project selected three lighthouse cities to test and upscale innovative solutions: Vienna, Munich, and Lyon. This master thesis presents the main characteristics of the mobility stations systems implemented in Vienna and Munich in the scope of the project Smarter Together. Its main goal is to share what can be learned from their experiences while approaching critically the concept of smart cities. This master thesis identifies important aspects to take into account when planning, implementing, and operating mobility stations, and provides an understanding of smart cities and smart mobility that goes beyond the adoption of technology. Several methods were combined for the development of this master thesis, such as quantitative secondary data, observational studies, application of survey forms, explorative expert interviews, and literature review. This work has demonstrated that the Smarter Together has a cutting-edge scope and contributed greatly to research and innovation, by creating living laboratories to test the application of technology in the urban environment. However, from the perspective of the mobility stations assessment, many caveats were made. In short, many lessons could be learned and are presented throughout this work aiming at contributing to the improvement of the mobility stations implemented in the project areas in Munich and Vienna, as well as for inspiring other cities in Europe and worldwide.}, subject = {Intelligente Stadt}, language = {en} } @inproceedings{PaulRodehorst, author = {Paul, Debus and Rodehorst, Volker}, title = {Multi-Scale Flight Path Planning for UAS Building Inspection}, series = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, volume = {2020}, booktitle = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, editor = {Santos, Toledo}, publisher = {Springer}, doi = {10.25643/bauhaus-universitaet.4205}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42053}, pages = {19}, abstract = {Unmanned aircraft systems (UAS) show large potential for the construction industry. Their use in condition assessment has increased significantly, due to technological and computational progress. UAS play a crucial role in developing a digital maintenance strategy for infrastructure, saving cost and effort, while increasing safety and reliability. Part of that strategy are automated visual UAS inspections of the building's condition. The resulting images can automatically be analyzed to identify and localize damages to the structure that have to be monitored. Further interest in parts of a structure can arise from events like accidents or collisions. Areas of low interest exist, where low resolution monitoring is sufficient. From different requirements for resolution, different levels of detail can be derived. They require special image acquisition parameters that differ mainly in the distance between camera and structure. Areas with a higher level of detail require a smaller distance to the object, producing more images. This work proposes a multi-scale flight path planning procedure, enabling higher resolution requirements for areas of special interest, while reducing the number of required images to a minimum. Careful selection of the camera positions maintains the complete coverage of the structure, while achieving the required resolution in all areas. The result is an efficient UAS inspection, reducing effort for the maintenance of infrastructure.}, subject = {Drohne}, language = {en} } @incollection{HaivenThornton, author = {Haiven, Max and Thornton, Cassie}, title = {{\"U}ber die University of the Phoenix}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4264}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42640}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {271 -- 288}, abstract = {Wir haben die folgenden 13 Protokolle als Methodik entwickelt, die als Orientierungshilfe bei der Entstehung unserer Workshops und Interventionen dient.}, subject = {Kunst}, language = {de} } @article{HarirchianLahmerRasulzade, author = {Harirchian, Ehsan and Lahmer, Tom and Rasulzade, Shahla}, title = {Earthquake Hazard Safety Assessment of Existing Buildings Using Optimized Multi-Layer Perceptron Neural Network}, series = {Energies}, volume = {2020}, journal = {Energies}, number = {Volume 13, Issue 8, 2060}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en13082060}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200504-41575}, pages = {16}, abstract = {The latest earthquakes have proven that several existing buildings, particularly in developing countries, are not secured from damages of earthquake. A variety of statistical and machine-learning approaches have been proposed to identify vulnerable buildings for the prioritization of retrofitting. The present work aims to investigate earthquake susceptibility through the combination of six building performance variables that can be used to obtain an optimal prediction of the damage state of reinforced concrete buildings using artificial neural network (ANN). In this regard, a multi-layer perceptron network is trained and optimized using a database of 484 damaged buildings from the D{\"u}zce earthquake in Turkey. The results demonstrate the feasibility and effectiveness of the selected ANN approach to classify concrete structural damage that can be used as a preliminary assessment technique to identify vulnerable buildings in disaster risk-management programs.}, subject = {Erdbeben}, language = {en} } @article{Haefner, author = {H{\"a}fner, Lukas}, title = {Common Ground. Kommentar zu Lisa Vollmer und Boris Michel „Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage"}, series = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.565}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200507-41655}, pages = {177 -- 182}, abstract = {Die im Jahr 2020 in Deutschland praktizierte Siedlungs- und Wohnungspolitik erh{\"a}lt in Anbetracht ihrer Auswirkungen auf die soziale und {\"o}kologische Lage einen bitteren Beigeschmack. Arm und Reich triften weiter auseinander und einer zielgerichteten {\"o}kologischen Transformation der Art und Weise, wie Stadtentwicklung und Wohnungspolitik gestaltet werden,stehen noch immer historisch und systemisch bedingte Pfadabh{\"a}ngigkeiten im Weg. Diese werden nur durch eine integrierte Betrachtung sozialer und {\"o}konomischer Aspekte sichtbar und deuten auf eine der urspr{\"u}nglichen Fragen linker Gesellschaftsforschung hin: Die Auseinandersetzung mit dem Verh{\"a}ltnis von Eigentum und Gerechtigkeit. Im Ergebnis stehen drei wesentliche Befunde: Der Diskurs zum Schutz des Klimas und der Biodiversit{\"a}t ber{\"u}hrt direkt die Parameter Dichte, Nutzungsmischung und Fl{\"a}cheninanspruchnahme; zweitens steigt letztere relativ mit erh{\"o}htem, individuell verf{\"u}gbaren Kapital und insbesondere im selbstgenutztem Eigentum gegen{\"u}ber Mietwohnungen; und drittens w{\"a}chst der Eigentumsanteil mit fortschreitender Finanzialisierung des Wohnungsmarktes, sodass das Risiko sozialer und {\"o}kologischer Krisen sich versch{\"a}rft.}, subject = {Umweltgerechtigkeit}, language = {de} } @phdthesis{Schmitz, author = {Schmitz, Tonia Annick}, title = {Entwicklung und Bilanzierung eines Photobioreaktorsystems zur Makroalgenkultivierung am Standort einer landwirtschaftlichen Biogasanlage}, doi = {10.25643/bauhaus-universitaet.4177}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200604-41774}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {220}, abstract = {Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe f{\"u}r die Verwendung als Energietr{\"a}ger, Nahrungsmittel oder als Ausgangsstoff f{\"u}r Pharmazeutika. Dass die Quantit{\"a}t und Qualit{\"a}t der in nat{\"u}rlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und k{\"u}stennahen Aquakulturen in Europa gegenw{\"a}rtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabh{\"a}ngige Algenproduktion zu erm{\"o}glichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt. Im Ergebnis wird f{\"u}r den gegenw{\"a}rtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz f{\"u}r die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz f{\"u}r die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erh{\"o}ht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf j{\"a}hrlich 460.869€ f{\"u}r Ulva intestinalis, 4.010€ f{\"u}r Fucus vesiculosus und 16.913€ f{\"u}r Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gez{\"u}chteten Gr{\"u}nalge Ulva intestinalis anzustreben und die Produktivit{\"a}t der Zuchtanlage im Sinne des Optimalszenarios zu steigern.}, subject = {Makroalgen}, language = {de} } @phdthesis{AbuBakar, author = {Abu Bakar, Ilyani Akmar}, title = {Computational Analysis of Woven Fabric Composites: Single- and Multi-Objective Optimizations and Sensitivity Analysis in Meso-scale Structures}, issn = {1610-7381}, doi = {10.25643/bauhaus-universitaet.4176}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200605-41762}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {151}, abstract = {This study permits a reliability analysis to solve the mechanical behaviour issues existing in the current structural design of fabric structures. Purely predictive material models are highly desirable to facilitate an optimized design scheme and to significantly reduce time and cost at the design stage, such as experimental characterization. The present study examined the role of three major tasks; a) single-objective optimization, b) sensitivity analyses and c) multi-objective optimization on proposed weave structures for woven fabric composites. For single-objective optimization task, the first goal is to optimize the elastic properties of proposed complex weave structure under unit cells basis based on periodic boundary conditions. We predict the geometric characteristics towards skewness of woven fabric composites via Evolutionary Algorithm (EA) and a parametric study. We also demonstrate the effect of complex weave structures on the fray tendency in woven fabric composites via tightness evaluation. We utilize a procedure which does not require a numerical averaging process for evaluating the elastic properties of woven fabric composites. The fray tendency and skewness of woven fabrics depends upon the behaviour of the floats which is related to the factor of weave. Results of this study may suggest a broader view for further research into the effects of complex weave structures or may provide an alternative to the fray and skewness problems of current weave structure in woven fabric composites. A comprehensive study is developed on the complex weave structure model which adopts the dry woven fabric of the most potential pattern in singleobjective optimization incorporating the uncertainties parameters of woven fabric composites. The comprehensive study covers the regression-based and variance-based sensitivity analyses. The second task goal is to introduce the fabric uncertainties parameters and elaborate how they can be incorporated into finite element models on macroscopic material parameters such as elastic modulus and shear modulus of dry woven fabric subjected to uni-axial and biaxial deformations. Significant correlations in the study, would indicate the need for a thorough investigation of woven fabric composites under uncertainties parameters. The study describes here could serve as an alternative to identify effective material properties without prolonged time consumption and expensive experimental tests. The last part focuses on a hierarchical stochastic multi-scale optimization approach (fine-scale and coarse-scale optimizations) under geometrical uncertainties parameters for hybrid composites considering complex weave structure. The fine-scale optimization is to determine the best lamina pattern that maximizes its macroscopic elastic properties, conducted by EA under the following uncertain mesoscopic parameters: yarn spacing, yarn height, yarn width and misalignment of yarn angle. The coarse-scale optimization has been carried out to optimize the stacking sequences of symmetric hybrid laminated composite plate with uncertain mesoscopic parameters by employing the Ant Colony Algorithm (ACO). The objective functions of the coarse-scale optimization are to minimize the cost (C) and weight (W) of the hybrid laminated composite plate considering the fundamental frequency and the buckling load factor as the design constraints. Based on the uncertainty criteria of the design parameters, the appropriate variation required for the structural design standards can be evaluated using the reliability tool, and then an optimized design decision in consideration of cost can be subsequently determined.}, subject = {Verbundwerkstoff}, language = {en} } @phdthesis{Lee, author = {Lee, Sihyo}, title = {The making of totalitarian city in Pyongyang: The spatial transition from free to ideology, and for marketization}, doi = {10.25643/bauhaus-universitaet.4173}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200526-41731}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {238}, abstract = {Space is a social product and a social producer. The main aim of this thesis is to reveal 'the process of totalitarian city making in Pyongyang', especially in the light of the interaction between the power and urban space. The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot. After the 1945 independence, Kim's regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens. After entry to the market, to keep Kim's controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives' gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang. This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society.}, subject = {Pyongyang}, language = {en} } @article{SadeghzadehMaddahAhmadietal., author = {Sadeghzadeh, Milad and Maddah, Heydar and Ahmadi, Mohammad Hossein and Khadang, Amirhosein and Ghazvini, Mahyar and Mosavi, Amir Hosein and Nabipour, Narjes}, title = {Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network}, series = {Nanomaterials}, volume = {2020}, journal = {Nanomaterials}, number = {Volume 10, Issue 4, 697}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/nano10040697}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200421-41308}, abstract = {In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol-gel method. The results indicated that 1.5 vol.\% of nanofluids enhanced the thermal conductivity by up to 25\%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable. View Full-Text}, subject = {W{\"a}rmeleitf{\"a}higkeit}, language = {en} } @article{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Performance evaluation of ductless personalized ventilation in comparison with desk fans using numerical simulations}, series = {Indoor Air}, volume = {2020}, journal = {Indoor Air}, publisher = {John Wiley \& Sons Ltd}, doi = {10.1111/ina.12672}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200422-41407}, pages = {14}, abstract = {The performance of ductless personalized ventilation (DPV) was compared to the performance of a typical desk fan since they are both stand-alone systems that allow the users to personalize their indoor environment. The two systems were evaluated using a validated computational fluid dynamics (CFD) model of an office room occupied by two users. To investigate the impact of DPV and the fan on the inhaled air quality, two types of contamination sources were modelled in the domain: an active source and a passive source. Additionally, the influence of the compared systems on thermal comfort was assessed using the coupling of CFD with the comfort model developed by the University of California, Berkeley (UCB model). Results indicated that DPV performed generally better than the desk fan. It provided better thermal comfort and showed a superior performance in removing the exhaled contaminants. However, the desk fan performed better in removing the contaminants emitted from a passive source near the floor level. This indicates that the performance of DPV and desk fans depends highly on the location of the contamination source. Moreover, the simulations showed that both systems increased the spread of exhaled contamination when used by the source occupant.}, subject = {Behaglichkeit}, language = {en} } @article{SaadatfarKhosraviHassannatajJoloudarietal., author = {Saadatfar, Hamid and Khosravi, Samiyeh and Hassannataj Joloudari, Javad and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {A New K-Nearest Neighbors Classifier for Big Data Based on Efficient Data Pruning}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {volume 8, issue 2, article 286}, publisher = {MDPI}, doi = {10.3390/math8020286}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200225-40996}, pages = {12}, abstract = {The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{HosseinNezhadShirazi, author = {Hossein Nezhad Shirazi, Ali}, title = {Multi-Scale Modeling of Lithium ion Batteries: a thermal management approach and molecular dynamic studies}, doi = {10.25643/bauhaus-universitaet.4098}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200214-40986}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low. Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs. Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite. It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.}, subject = {Akkumulator}, language = {en} } @phdthesis{Truemer, author = {Tr{\"u}mer, Andr{\´e}}, title = {Calcinierte Tone als Puzzolane der Zukunft - Von den Rohstoffen bis zur Wirkung im Beton}, isbn = {978-3-00-065011-6}, doi = {10.25643/bauhaus-universitaet.4096}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200214-40968}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {222}, abstract = {Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanit{\"a}t soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verf{\"u}gbarkeit sowie der {\"a}ußerst geringe rohstoffbedingte CO2-Ausstoß w{\"a}hrend der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Variet{\"a}t der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die {\"U}bertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivit{\"a}t auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung f{\"u}r die Anwendung im Beton herauszuarbeiten. In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus f{\"u}r Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivit{\"a}t der Brennprodukte als auch umgekehrt die H{\"o}he der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von r{\"o}ntgenamorph und hochreaktiv zu glasig und reaktionstr{\"a}ge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanit{\"a}t festgestellt werden. Dies best{\"a}tigte sich anschließend in Parameterversuchen, bei denen die Einfl{\"u}sse von Rohstoffqualit{\"a}t, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivit{\"a}tsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualit{\"a}ten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die f{\"u}r Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorg{\"a}ngen abh{\"a}ngige Schadmechanismen unterdr{\"u}ckt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bem{\"a}ngeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die f{\"u}r Puzzolane stark ausgepr{\"a}gte Carbonatisierungsneigung. Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bez{\"u}glich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln k{\"o}nnen. So kann selbst ein stark verunreinigter Illit-Ton die Qualit{\"a}t von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Pr{\"a}sens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanit{\"a}ten bis hin zur hochreaktiven Metakaolin-Qualit{\"a}t. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsf{\"a}higkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen f{\"u}r eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend k{\"o}nnen Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten.}, subject = {Beton}, language = {de} } @phdthesis{Kavrakov, author = {Kavrakov, Igor}, title = {Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-284-2}, doi = {10.25643/bauhaus-universitaet.4109}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200316-41099}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {314}, abstract = {Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles' strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind-bridge interaction and suggest appropriate modeling strategies for an enhanced design.}, subject = {Br{\"u}cke}, language = {en} } @phdthesis{Jentzsch, author = {Jentzsch, Sina}, title = {Appell der Dinge. K{\"u}nstlerische Zuwendung zu den Dingen in den 1960er-Jahren}, doi = {10.25643/bauhaus-universitaet.4112}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200323-41129}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {261}, abstract = {Diese Dissertation besch{\"a}ftigt sich mit Kunstwerken, die das allt{\"a}gliche Ding in den Blick nehmen. N{\"a}hrboden dieser Kunstform sind die soziokulturellen Entwicklungen des 20. Jahrhunderts, mit denen wesentliche Ver{\"a}nderungen hinsichtlich des Verh{\"a}ltnisses von Mensch und Ding einhergingen. Daraus resultierte eine allgemeine k{\"u}nstlerische Zuwendung zu den Dingen und eine einzigartige Kulmination aus verschiedenartigen Auseinandersetzungen mit ihnen als kunstf{\"a}hige Gegenst{\"a}nde, {\"u}ber die sich die neue Dingwelt erschlossen wurde und deren Kunstwerke einen Spiegel dieser Entwicklungen darstellen. Die Dissertation stellt ebenfalls die Dinge selbst in den Fokus. Vier Aspekte von Dingen (Materialit{\"a}t, Funktionalit{\"a}t, Repr{\"a}sentationalit{\"a}t und Relationalit{\"a}t) werden gesondert ins Auge gefasst und in den theoretischen Diskurs des 20. Jahrhunderts eingeordnet, um sie als Teil der gelebten Realit{\"a}t besser zu verstehen, von der sich der {\"a}sthetische Blick nicht trennen l{\"a}sst. Anhand der k{\"u}nstlerischen Positionen von Robert Rauschenberg, Christo und Jeanne-Claude, Daniel Spoerri und Arman sowie Claes Oldenburg werden die verschiedenen Aspekte der Dinge n{\"a}her betrachtet und analysiert, wie diese speziell in den Kunstwerken thematisiert werden und welche Relevanz sie f{\"u}r deren Rezeptionserfahrung haben. Die Korrelation dieser beiden Ebenen - die Dinge als konstitutiver Bestandteil im sozialen Raum und die Dinge als Elemente in Kunstwerken -, die im Fokus der vorliegenden Untersuchung steht, erm{\"o}glicht es, die k{\"u}nstlerische Zuwendung zu den Dingen in den 1960er-Jahren neu einzuordnen. Dar{\"u}ber hinaus wird dadurch ein differenziertes Bild von der Kunst dieser Zeit sowie den Dingen in der Kunst im Allgemeinen gezeichnet.}, subject = {Ding}, language = {de} } @book{OPUS4-4106, title = {Postwachstumsstadt. Konturen einer solidarischen Stadtpolitik}, editor = {Brokow-Loga, Anton and Eckardt, Frank}, publisher = {oekom verlag}, address = {M{\"u}nchen}, isbn = {978-3-96238-696-2}, doi = {10.14512/9783962386962}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200311-41061}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {344}, abstract = {St{\"a}dte ohne Wachstum - eine bislang kaum vorstellbare Vision. Doch Klimawandel, Ressourcenverschwendung, wachsende soziale Ungleichheiten und viele andere Zukunftsgefahren stellen das bisherige Allheilmittel Wachstum grunds{\"a}tzlich infrage. Wie wollen wir heute und morgen zusammenleben? Wie gestalten wir ein gutes Leben f{\"u}r alle in der Stadt? W{\"a}hrend in einzelnen Nischen diese Fragen bereits ansatzweise beantwortet werden, fehlt es noch immer an umfassenden Entw{\"u}rfen und Transformationsans{\"a}tzen, die eine fundamental andere, solidarische Stadt konturieren. Diesen Versuch wagt das Projekt Postwachstumsstadt. In diesem Buch werden konzeptionelle und pragmatische Aspekte aus verschiedenen Bereichen der Stadtpolitik zusammengebracht, die neue Pfade aufzeigen und verkn{\"u}pfen. Die Beitr{\"a}ge diskutieren st{\"a}dtische Wachstumskrisen, transformative Planung und Konflikte um Gestaltungsmacht. Nicht zuletzt wird dabei auch die Frage nach der Rolle von Stadtutopien neu gestellt. Dadurch soll eine l{\"a}ngst f{\"a}llige Debatte dar{\"u}ber angestoßen werden, wie sich notwendige st{\"a}dtische Wenden durch eine sozial{\"o}kologische Neuorientierung vor Ort verwirklichen lassen.}, subject = {Architektur}, language = {de} } @article{AhmadiBaghbanSadeghzadehetal., author = {Ahmadi, Mohammad Hossein and Baghban, Alireza and Sadeghzadeh, Milad and Zamen, Mohammad and Mosavi, Amir and Shamshirband, Shahaboddin and Kumar, Ravinder and Mohammadi-Khanaposhtani, Mohammad}, title = {Evaluation of electrical efficiency of photovoltaic thermal solar collector}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {volume 14, issue 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1734094}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200304-41049}, pages = {545 -- 565}, abstract = {In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for thermal performance of a photovoltaic-thermal solar collector (PV/T). In the proposed models, the inlet temperature, flow rate, heat, solar radiation, and the sun heat have been considered as the input variables. Data set has been extracted through experimental measurements from a novel solar collector system. Different analyses are performed to examine the credibility of the introduced models and evaluate their performances. The proposed LSSVM model outperformed the ANFIS and ANNs models. LSSVM model is reported suitable when the laboratory measurements are costly and time-consuming, or achieving such values requires sophisticated interpretations.}, subject = {Fotovoltaik}, language = {en} } @article{ShamshirbandBabanezhadMosavietal., author = {Shamshirband, Shahaboddin and Babanezhad, Meisam and Mosavi, Amir and Nabipour, Narjes and Hajnal, Eva and Nadai, Laszlo and Chau, Kwok-Wing}, title = {Prediction of flow characteristics in the bubble column reactor by the artificial pheromone-based communication of biological ants}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {volume 14, issue 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1715842}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200227-41013}, pages = {367 -- 378}, abstract = {A novel combination of the ant colony optimization algorithm (ACO)and computational fluid dynamics (CFD) data is proposed for modeling the multiphase chemical reactors. The proposed intelligent model presents a probabilistic computational strategy for predicting various levels of three-dimensional bubble column reactor (BCR) flow. The results prove an enhanced communication between ant colony prediction and CFD data in different sections of the BCR.}, subject = {Maschinelles Lernen}, language = {en} } @misc{Freire, type = {Master Thesis}, author = {Freire, Kamai}, title = {Panafricanism and African Revolution in Brazilian Music}, doi = {10.25643/bauhaus-universitaet.4353}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210216-43536}, school = {Hochschule f{\"u}r Musik FRANZ LISZT}, pages = {163}, abstract = {This research departs from the teachings of Kwame Ture on the difference between mobilization and organization in the panafricanist struggle to analyze then the use of Music within the anti-racist and anti-colonialist struggle in Brazil.}, subject = {Saz}, language = {en} } @article{HarirchianJadhavMohammadetal., author = {Harirchian, Ehsan and Jadhav, Kirti and Mohammad, Kifaytullah and Aghakouchaki Hosseini, Seyed Ehsan and Lahmer, Tom}, title = {A Comparative Study of MCDM Methods Integrated with Rapid Visual Seismic Vulnerability Assessment of Existing RC Structures}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 18, article 6411}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10186411}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200918-42360}, pages = {24}, abstract = {Recently, the demand for residence and usage of urban infrastructure has been increased, thereby resulting in the elevation of risk levels of human lives over natural calamities. The occupancy demand has rapidly increased the construction rate, whereas the inadequate design of structures prone to more vulnerability. Buildings constructed before the development of seismic codes have an additional susceptibility to earthquake vibrations. The structural collapse causes an economic loss as well as setbacks for human lives. An application of different theoretical methods to analyze the structural behavior is expensive and time-consuming. Therefore, introducing a rapid vulnerability assessment method to check structural performances is necessary for future developments. The process, as mentioned earlier, is known as Rapid Visual Screening (RVS). This technique has been generated to identify, inventory, and screen structures that are potentially hazardous. Sometimes, poor construction quality does not provide some of the required parameters; in this case, the RVS process turns into a tedious scenario. Hence, to tackle such a situation, multiple-criteria decision-making (MCDM) methods for the seismic vulnerability assessment opens a new gateway. The different parameters required by RVS can be taken in MCDM. MCDM evaluates multiple conflicting criteria in decision making in several fields. This paper has aimed to bridge the gap between RVS and MCDM. Furthermore, to define the correlation between these techniques, implementation of the methodologies from Indian, Turkish, and Federal Emergency Management Agency (FEMA) codes has been done. The effects of seismic vulnerability of structures have been observed and compared.}, subject = {Erdbebensicherheit}, language = {en} } @incollection{Bee, author = {Bee, Julia}, title = {Collagen, Montagen, Anordnen, Umordnen - Wie mit Bildern experimentieren}, series = {Experimente lernen, Techniken tauschen, ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen, ein spekulatives Handbuch}, publisher = {Noturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4250}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42504}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {29 -- 49}, abstract = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch Das spekulative Handbuch bietet vielf{\"a}ltige Techniken f{\"u}r ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische {\"U}berlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einf{\"u}hrt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Bank{\"u}berf{\"a}llen, der Universit{\"a}t der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem K{\"o}rperstreik.}, subject = {Montage}, language = {de} } @incollection{BeeEgert, author = {Bee, Julia and Egert, Gerko}, title = {Experimente lernen, techniken tauschen, zur Einleitung}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4255}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42553}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {7 -- 26}, abstract = {Experimente lernen, Techniken tauschen Ein spekulatives Handbuch Das spekulative Handbuch bietet vielf{\"a}ltige Techniken f{\"u}r ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische {\"U}berlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einf{\"u}hrt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Bank{\"u}berf{\"a}llen, der Universit{\"a}t der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem K{\"o}rperstreik.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @incollection{Hoelscher, author = {H{\"o}lscher, Stefan}, title = {Im Workshop des Sinnlichen}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4252}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42523}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {167 -- 185}, abstract = {Folgende fiktive Situation soll ein Problem markieren, das in diesem Beitrag diskutiert wird und nach Ansicht seines Autors ein an Kunsthochschulen weit verbreitetes Ph{\"a}nomen darstellt. Im Rahmen eines Mentoring-Workshops stellt eine Gruppe Studierender Arbeitsmaterial ihres aktuellen Projekts vor, um es anschließend in der Gruppe zu besprechen. Ziel des Veranstaltungsformats ist es, die Studierenden w{\"a}hrend der Entwicklung ihrer k{\"u}nstlerischen Praktiken zu begleiten und diese nicht anhand handwerklicher Kriterien {\"u}berzudeterminieren, sondern ihrer Eigenlogik zu folgen, den ihnen inh{\"a}renten {\"a}sthetischen Potentialen nachzugehen und ein Bewusstsein f{\"u}r die Kontexte und Diskurse zu schaffen, in denen sie verortet sind. Die Studierenden, die heute ihr Projekt vorstellen, haben ein Photoalbum mitgebracht, in das sie, der Anordnungslogik von Urlaubsaufnahmen folgend, eine Reihe analoger Photographien geklebt haben, die Dutzende Schnappsch{\"u}sse einer entfernten Insel zeigen, die sich hinter der den Vordergrund des Bildes einnehmenden Meeresoberfl{\"a}che abzeichnet.}, subject = {Workshop}, language = {de} } @misc{MendoncadeAlmeida, type = {Master Thesis}, author = {Mendon{\c{c}}a de Almeida, Karina}, title = {Why isn't Google welcome in Kreuzberg? Social movement and the effects of Internet on urban space}, doi = {10.25643/bauhaus-universitaet.4244}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200924-42446}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {132}, abstract = {Advances in information and communication technologies such as the Internet have driven a great transformation in the interactions between individuals and the urban environment. As the use of the Internet in cities becomes more intense and diverse, there is also a restructuring of urban space, which is experienced by groups in society in various ways, according to the specificity of each context. Accordingly, large Internet companies have emerged as new players in the processes of urbanization, either through partnerships with the public administration or through various services offered directly to urban residents. Once these corporations are key actors in the digitalization of urban services, their operations can affect the patterns of urban inequality and generate a series of new struggles over the production of space. Interested in analyzing this phenomena from the perspective of civil society, the present Master Thesis examined a social movement that prevented Google to settle a new startup campus in the district of Kreuzberg, in Berlin. By asking why Google was not welcome in that context, this study also sought to understand how internet, as well as its main operators, has affected everyday life in the city. Thus, besides analyzing the movement, I investigated the particularities of the urban context where it arose and the elements that distinguish the mobilization's opponent. In pursuit of an interdisciplinary approach, I analyzed and discussed the results of empirical research in dialogue with critical theories in the fields of urban studies and the Internet, with emphasis on Castells' definitions of urban social movements and network society (1983, 2009, 2015), Couldry's and Mejias' (2019) idea of data colonialism, Lef{\`e}bvre's (1991, 1996) concepts of abstract space and the right to the city, as well as Zuboff's (2019) theory of surveillance capitalism. The case at hand has exposed that Google plays a prominent role in the way the Internet has been developed and deployed in cities. From the perspective accessed, the current appropriation of Internet technologies has been detrimental to individual autonomy and has contributed to intensifying existing inequalities in the city. The alternative vision to this relies mainly on the promotion of decentralized solidarity networks.}, subject = {Soziale Bewegung}, language = {en} } @article{MosaviShamshirbandEsmaeilbeikietal., author = {Mosavi, Amir and Shamshirband, Shahaboddin and Esmaeilbeiki, Fatemeh and Zarehaghi, Davoud and Neyshabouri, Mohammadreza and Samadianfard, Saeed and Ghorbani, Mohammad Ali and Nabipour, Narjes and Chau, Kwok-Wing}, title = {Comparative analysis of hybrid models of firefly optimization algorithm with support vector machines and multilayer perceptron for predicting soil temperature at different depths}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {Volume 14, Issue 1}, doi = {10.1080/19942060.2020.1788644}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200911-42347}, pages = {939 -- 953}, abstract = {This research aims to model soil temperature (ST) using machine learning models of multilayer perceptron (MLP) algorithm and support vector machine (SVM) in hybrid form with the Firefly optimization algorithm, i.e. MLP-FFA and SVM-FFA. In the current study, measured ST and meteorological parameters of Tabriz and Ahar weather stations in a period of 2013-2015 are used for training and testing of the studied models with one and two days as a delay. To ascertain conclusive results for validation of the proposed hybrid models, the error metrics are benchmarked in an independent testing period. Moreover, Taylor diagrams utilized for that purpose. Obtained results showed that, in a case of one day delay, except in predicting ST at 5 cm below the soil surface (ST5cm) at Tabriz station, MLP-FFA produced superior results compared with MLP, SVM, and SVM-FFA models. However, for two days delay, MLP-FFA indicated increased accuracy in predicting ST5cm and ST 20cm of Tabriz station and ST10cm of Ahar station in comparison with SVM-FFA. Additionally, for all of the prescribed models, the performance of the MLP-FFA and SVM-FFA hybrid models in the testing phase was found to be meaningfully superior to the classical MLP and SVM models.}, subject = {Bodentemperatur}, language = {en} } @book{WellbrockBuschow, author = {Wellbrock, Christian-Mathias and Buschow, Christopher}, title = {Money for Nothing and Content for Free?}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-7489-0725-1}, doi = {10.5771/9783748907251}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201001-42475}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {209}, abstract = {Wie k{\"o}nnen journalistische Angebote nachhaltig finanziert werden? Dies bleibt die Kernfrage f{\"u}r Medienh{\"a}user und journalistische Neugr{\"u}ndungen bei der Entwicklung und beim Aufbau tragf{\"a}higer digitaler Gesch{\"a}ftsmodelle. Die Autoren des vorliegenden Bandes vermitteln einen breiten {\"U}berblick {\"u}ber den Wissensstand zum Thema Paid Content, Plattformen und Zahlungsbereitschaft im Journalismus und er{\"o}ffnen innovative Blickwinkel auf neuartige Plattformmodelle ebenso wie auf Motive und Bed{\"u}rfnisse der Nutzerinnen und Nutzer digitaljournalistischer Inhalte. Auf Grundlage empirischer Forschung werden Handlungsempfehlungen f{\"u}r die nutzerzentrierte Ausgestaltung von Paid-Content-Angeboten sowie neue Perspektiven auf Zahlungsbereitschaft im digitalen Journalismus erschlossen - relevant sowohl f{\"u}r die Wissenschaft wie auch f{\"u}r die Medienpraxis.}, subject = {Digitaljournalismus}, language = {de} } @book{EgertBee, author = {Egert, Gerko and Bee, Julia}, title = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, editor = {Bee, Julia and Egert, Gerko}, publisher = {Nocturne}, address = {Weimar und Berlin}, isbn = {978-3-00-066190-7}, doi = {10.25643/bauhaus-universitaet.4249}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201005-42494}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {183}, abstract = {Das spekulative Handbuch bietet vielf{\"a}ltige Techniken f{\"u}r ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische {\"U}berlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einf{\"u}hrt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Bank{\"u}berf{\"a}llen, der Universit{\"a}t der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem K{\"o}rperstreik.}, subject = {Experimente}, language = {de} } @phdthesis{Krtilova, author = {Krtilova, Katerina}, title = {Gesten des Denkens. Vil{\´e}m Flussers Medienphilosophie}, doi = {10.25643/bauhaus-universitaet.4067}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200123-40679}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {202}, abstract = {In einer systematischen Interpretation von Vil{\´e}m Flussers Werk schl{\"a}gt die Arbeit vor, Flussers Ansatz als einen medienphilosophischen zu verstehen, insofern er das „wie" der medienphilosophischen Fragestellung in den Mittelpunkt r{\"u}ckt. Medien werden nicht erst dann zu einem wesentlichen Bestandteil von Flussers Philosophie, wenn er sie explizit zum Gegenstand seiner Untersuchungen der gegenw{\"a}rtigen Kultur und Gesellschaft oder historischer R{\"u}ckblicke macht; Denken vollzieht sich immer in Medien oder medialen Praktiken, es wird nicht nur von ihnen (mit) gepr{\"a}gt - ohne Medien g{\"a}be es kein Denken und umgekehrt ver{\"a}ndert sich Philosophie mit den (jeweils) neuen Medien. Ausgehend von Begriffen oder eher Denkfiguren, die neben dem „was" des jeweils verhandelten Themas auch das „wie" der Reflexion selbst adressieren, wird der „Umbruch in der Struktur des Denkens" zugleich als Beschreibung von Medienumbr{\"u}chen verstanden - mit dem Fluchtpunkt des Sprungs in das Universum der Komputation - und als Vollzug der gegenw{\"a}rtigen Ver{\"a}nderung der „Methode des Denkens". Flussers (Ver)Suche einer Reflexion, die nicht mehr durch das Medium Schrift strukturiert ist, sondern sowohl alten Medien wie dem Bild - bzw. Praktiken des Abbildens, Darstellens, Einbildens usw. - als auch neuen Medien - dem Komputieren - Geltung verschafft, laufen auf eine widerspr{\"u}chliche Diagnose des neuen Universums der Komputation (anders: der technischen Bilder) hinaus : eine kybermetisch inspirierte Vision der frei modellierbaren Wirklichkeit(en) einerseits und die Dystopie einer Welt, in der Apparaten Denken, Wahrnehmen und Handeln beherrschen andererseits. Die Arbeit zeigt auf, wie Flusser zu dieser Aporie der Medienreflexion - die weit {\"u}ber Flussers Werk hinaus virulent bleibt - gelangt und wie sie, ausgehend von seiner Figur der Geste, im Sinne einer performativen Medienreflexion gel{\"o}st werden k{\"o}nnte.}, subject = {Medientheorie}, language = {de} } @article{AmirinasabShamshirbandChronopoulosetal., author = {Amirinasab, Mehdi and Shamshirband, Shahaboddin and Chronopoulos, Anthony Theodore and Mosavi, Amir and Nabipour, Narjes}, title = {Energy-Efficient Method for Wireless Sensor Networks Low-Power Radio Operation in Internet of Things}, series = {electronics}, volume = {2020}, journal = {electronics}, number = {volume 9, issue 2, 320}, publisher = {MDPI}, doi = {10.3390/electronics9020320}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40954}, pages = {20}, abstract = {The radio operation in wireless sensor networks (WSN) in Internet of Things (IoT)applications is the most common source for power consumption. Consequently, recognizing and controlling the factors affecting radio operation can be valuable for managing the node power consumption. Among essential factors affecting radio operation, the time spent for checking the radio is of utmost importance for monitoring power consumption. It can lead to false WakeUp or idle listening in radio duty cycles and ContikiMAC. ContikiMAC is a low-power radio duty-cycle protocol in Contiki OS used in WakeUp mode, as a clear channel assessment (CCA) for checking radio status periodically. This paper presents a detailed analysis of radio WakeUp time factors of ContikiMAC. Furthermore, we propose a lightweight CCA (LW-CCA) as an extension to ContikiMAC to reduce the Radio Duty-Cycles in false WakeUps and idle listening though using dynamic received signal strength indicator (RSSI) status check time. The simulation results in the Cooja simulator show that LW-CCA reduces about 8\% energy consumption in nodes while maintaining up to 99\% of the packet delivery rate (PDR).}, subject = {Internet der Dinge}, language = {en} } @article{HomaeiSoleimaniShamshirbandetal., author = {Homaei, Mohammad Hossein and Soleimani, Faezeh and Shamshirband, Shahaboddin and Mosavi, Amir and Nabipour, Narjes and Varkonyi-Koczy, Annamaria R.}, title = {An Enhanced Distributed Congestion Control Method for Classical 6LowPAN Protocols Using Fuzzy Decision System}, series = {IEEE Access}, journal = {IEEE Access}, number = {volume 8}, publisher = {IEEE}, doi = {10.1109/ACCESS.2020.2968524}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40805}, pages = {20628 -- 20645}, abstract = {The classical Internet of things routing and wireless sensor networks can provide more precise monitoring of the covered area due to the higher number of utilized nodes. Because of the limitations in shared transfer media, many nodes in the network are prone to the collision in simultaneous transmissions. Medium access control protocols are usually more practical in networks with low traffic, which are not subjected to external noise from adjacent frequencies. There are preventive, detection and control solutions to congestion management in the network which are all the focus of this study. In the congestion prevention phase, the proposed method chooses the next step of the path using the Fuzzy decision-making system to distribute network traffic via optimal paths. In the congestion detection phase, a dynamic approach to queue management was designed to detect congestion in the least amount of time and prevent the collision. In the congestion control phase, the back-pressure method was used based on the quality of the queue to decrease the probability of linking in the pathway from the pre-congested node. The main goals of this study are to balance energy consumption in network nodes, reducing the rate of lost packets and increasing quality of service in routing. Simulation results proved the proposed Congestion Control Fuzzy Decision Making (CCFDM) method was more capable in improving routing parameters as compared to recent algorithms.}, subject = {Internet der dinge}, language = {en} } @article{HassannatajJoloudariHassannatajJoloudariSaadatfaretal., author = {Hassannataj Joloudari, Javad and Hassannataj Joloudari, Edris and Saadatfar, Hamid and GhasemiGol, Mohammad and Razavi, Seyyed Mohammad and Mosavi, Amir and Nabipour, Narjes and Shamshirband, Shahaboddin and Nadai, Laszlo}, title = {Coronary Artery Disease Diagnosis: Ranking the Significant Features Using a Random Trees Model}, series = {International Journal of Environmental Research and Public Health, IJERPH}, volume = {2020}, journal = {International Journal of Environmental Research and Public Health, IJERPH}, number = {Volume 17, Issue 3, 731}, publisher = {MDPI}, doi = {10.3390/ijerph17030731}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40819}, pages = {24}, abstract = {Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of side effects. Hence, the purpose of this study is to increase the accuracy of coronary heart disease diagnosis through selecting significant predictive features in order of their ranking. In this study, we propose an integrated method using machine learning. The machine learning methods of random trees (RTs), decision tree of C5.0, support vector machine (SVM), and decision tree of Chi-squared automatic interaction detection (CHAID) are used in this study. The proposed method shows promising results and the study confirms that the RTs model outperforms other models.}, subject = {Maschinelles Lernen}, language = {en} } @misc{Hamzah, type = {Master Thesis}, author = {Hamzah, Abdulrazzak}, title = {L{\"o}sung von Randwertaufgaben der Bruchmechanik mit Hilfe einer approximationsbasierten Kopplung zwischen der Finite-Elemente-Methode und Methoden der komplexen Analysis}, doi = {10.25643/bauhaus-universitaet.4093}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200211-40936}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Das Hauptziel der vorliegenden Arbeit war es, eine stetige Kopplung zwischen der ananlytischen und numerischen L{\"o}sung von Randwertaufgaben mit Singularit{\"a}ten zu realisieren. Durch die inter-polationsbasierte gekoppelte Methode kann eine globale C0 Stetigkeit erzielt werden. F{\"u}r diesen Zweck wird ein spezielle finite Element (Kopplungselement) verwendet, das die Stetigkeit der L{\"o}sung sowohl mit dem analytischen Element als auch mit den normalen CST Elementen gew{\"a}hrleistet. Die interpolationsbasierte gekoppelte Methode ist zwar f{\"u}r beliebige Knotenanzahl auf dem Interface ΓAD anwendbar, aber es konnte durch die Untersuchung von der Interpolationsmatrix und numerische Simulationen festgestellt werden, dass sie schlecht konditioniert ist. Um das Problem mit den numerischen Instabilit{\"a}ten zu bew{\"a}ltigen, wurde eine approximationsbasierte Kopplungsmethode entwickelt und untersucht. Die Stabilit{\"a}t dieser Methode wurde anschließend anhand der Untersuchung von der Gramschen Matrix des verwendeten Basissystems auf zwei Intervallen [-π,π] und [-2π,2π] beurteilt. Die Gramsche Matrix auf dem Intervall [-2π,2π] hat einen g{\"u}nstigeren Konditionszahl in der Abh{\"a}ngigkeit von der Anzahl der Kopplungsknoten auf dem Interface aufgewiesen. Um die dazu geh{\"o}rigen numerischen Instabilit{\"a}ten ausschließen zu k{\"o}nnen wird das Basissystem mit Hilfe vom Gram-Schmidtschen Orthogonalisierungsverfahren auf beiden Intervallen orthogonalisiert. Das orthogonale Basissystem l{\"a}sst sich auf dem Intervall [-2π,2π] mit expliziten Formeln schreiben. Die Methode des konsistentes Sampling, die h{\"a}ufig in der Nachrichtentechnik verwendet wird, wurde zur Realisierung von der approximationsbasierten Kopplung herangezogen. Eine Beschr{\"a}nkung dieser Methode ist es, dass die Anzahl der Sampling-Basisfunktionen muss gleich der Anzahl der Wiederherstellungsbasisfunktionen sein. Das hat dazu gef{\"u}hrt, dass das eingef{\"u}hrt Basissys-tem (mit 2 n Basisfunktionen) nur mit n Basisfunktion verwendet werden kann. Zur L{\"o}sung diese Problems wurde ein alternatives Basissystems (Variante 2) vorgestellt. F{\"u}r die Verwendung dieses Basissystems ist aber eine Transformationsmatrix M n{\"o}tig und bei der Orthogonalisierung des Basissystems auf dem Intervall [-π,π] kann die Herleitung von dieser Matrix kompliziert und aufwendig sein. Die Formfunktionen wurden anschließend f{\"u}r die beiden Varianten hergeleitet und grafisch (f{\"u}r n = 5) dargestellt und wurde gezeigt, dass diese Funktionen die Anforderungen an den Formfunktionen erf{\"u}llen und k{\"o}nnen somit f{\"u}r die FE- Approximation verwendet werden. Anhand numerischer Simulationen, die mit der Variante 1 (mit Orthogonalisierung auf dem Intervall [-2π,2π]) durchgef{\"u}hrt wurden, wurden die grundlegenden Fragen (Beispielsweise: Stetigkeit der Verformungen auf dem Interface ΓAD, Spannungen auf dem analytischen Gebiet) {\"u}ber- pr{\"u}ft.}, subject = {Mathematik}, language = {de} } @phdthesis{Sung, author = {Sung, Younkyoung}, title = {Cultural Tourism and Social Resilience: Discourse of Historic Cities in East Germany, the Case of Gotha and Eisenach}, doi = {10.25643/bauhaus-universitaet.4092}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200212-40920}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created. To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process. The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents' lives? The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience. Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants.}, subject = {Stadtmarketing}, language = {en} } @article{KargarSamadianfardParsaetal., author = {Kargar, Katayoun and Samadianfard, Saeed and Parsa, Javad and Nabipour, Narjes and Shamshirband, Shahaboddin and Mosavi, Amir and Chau, Kwok-Wing}, title = {Estimating longitudinal dispersion coefficient in natural streams using empirical models and machine learning algorithms}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {Volume 14, No. 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1712260}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200128-40775}, pages = {311 -- 322}, abstract = {The longitudinal dispersion coefficient (LDC) plays an important role in modeling the transport of pollutants and sediment in natural rivers. As a result of transportation processes, the concentration of pollutants changes along the river. Various studies have been conducted to provide simple equations for estimating LDC. In this study, machine learning methods, namely support vector regression, Gaussian process regression, M5 model tree (M5P) and random forest, and multiple linear regression were examined in predicting the LDC in natural streams. Data sets from 60 rivers around the world with different hydraulic and geometric features were gathered to develop models for LDC estimation. Statistical criteria, including correlation coefficient (CC), root mean squared error (RMSE) and mean absolute error (MAE), were used to scrutinize the models. The LDC values estimated by these models were compared with the corresponding results of common empirical models. The Taylor chart was used to evaluate the models and the results showed that among the machine learning models, M5P had superior performance, with CC of 0.823, RMSE of 454.9 and MAE of 380.9. The model of Sahay and Dutta, with CC of 0.795, RMSE of 460.7 and MAE of 306.1, gave more precise results than the other empirical models. The main advantage of M5P models is their ability to provide practical formulae. In conclusion, the results proved that the developed M5P model with simple formulations was superior to other machine learning models and empirical models; therefore, it can be used as a proper tool for estimating the LDC in rivers.}, subject = {Maschinelles Lernen}, language = {en} } @article{DehghaniSalehiMosavietal., author = {Dehghani, Majid and Salehi, Somayeh and Mosavi, Amir and Nabipour, Narjes and Shamshirband, Shahaboddin and Ghamisi, Pedram}, title = {Spatial Analysis of Seasonal Precipitation over Iran: Co-Variation with Climate Indices}, series = {ISPRS, International Journal of Geo-Information}, volume = {2020}, journal = {ISPRS, International Journal of Geo-Information}, number = {Volume 9, Issue 2, 73}, publisher = {MDPI}, doi = {10.3390/ijgi9020073}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200128-40740}, pages = {23}, abstract = {Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing the variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Ni{\~n}o-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO), and North Atlantic Oscillation (NAO) on seasonal precipitation over Iran was investigated. For this purpose, 103 synoptic stations with at least 30 years of data were utilized. The Spearman correlation coefficient between the indices in the previous 12 months with seasonal precipitation was calculated, and the meaningful correlations were extracted. Then, the month in which each of these indices has the highest correlation with seasonal precipitation was determined. Finally, the overall amount of increase or decrease in seasonal precipitation due to each of these indices was calculated. Results indicate the Southern Oscillation Index (SOI), NAO, and PDO have the most impact on seasonal precipitation, respectively. Additionally, these indices have the highest impact on the precipitation in winter, autumn, spring, and summer, respectively. SOI has a diverse impact on winter precipitation compared to the PDO and NAO, while in the other seasons, each index has its special impact on seasonal precipitation. Generally, all indices in different phases may decrease the seasonal precipitation up to 100\%. However, the seasonal precipitation may increase more than 100\% in different seasons due to the impact of these indices. The results of this study can be used effectively in water resources management and especially in dam operation.}, subject = {Maschinelles Lernen}, language = {en} } @article{NabipourDehghaniMosavietal., author = {Nabipour, Narjes and Dehghani, Majid and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Short-Term Hydrological Drought Forecasting Based on Different Nature-Inspired Optimization Algorithms Hybridized With Artificial Neural Networks}, series = {IEEE Access}, volume = {2020}, journal = {IEEE Access}, number = {volume 8}, publisher = {IEEE}, doi = {10.1109/ACCESS.2020.2964584}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40796}, pages = {15210 -- 15222}, abstract = {Hydrological drought forecasting plays a substantial role in water resources management. Hydrological drought highly affects the water allocation and hydropower generation. In this research, short term hydrological drought forecasted based on the hybridized of novel nature-inspired optimization algorithms and Artificial Neural Networks (ANN). For this purpose, the Standardized Hydrological Drought Index (SHDI) and the Standardized Precipitation Index (SPI) were calculated in one, three, and six aggregated months. Then, three states where proposed for SHDI forecasting, and 36 input-output combinations were extracted based on the cross-correlation analysis. In the next step, newly proposed optimization algorithms, including Grasshopper Optimization Algorithm (GOA), Salp Swarm algorithm (SSA), Biogeography-based optimization (BBO), and Particle Swarm Optimization (PSO) hybridized with the ANN were utilized for SHDI forecasting and the results compared to the conventional ANN. Results indicated that the hybridized model outperformed compared to the conventional ANN. PSO performed better than the other optimization algorithms. The best models forecasted SHDI1 with R2 = 0.68 and RMSE = 0.58, SHDI3 with R 2 = 0.81 and RMSE = 0.45 and SHDI6 with R 2 = 0.82 and RMSE = 0.40.}, subject = {Maschinelles Lernen}, language = {en} } @article{ArtusKoch, author = {Artus, Mathias and Koch, Christian}, title = {State of the art in damage information modeling for RC bridges - A literature review}, series = {Advanced Engineering Informatics}, volume = {2020}, journal = {Advanced Engineering Informatics}, number = {volume 46, article 101171}, publisher = {Elsevier Science}, address = {Amsterdam}, doi = {10.1016/j.aei.2020.101171}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220506-46390}, pages = {1 -- 16}, abstract = {In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4\% and 2\% of its construction cost per year over its entire life cycle. This means that up to 80\% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.}, subject = {Building Information Modeling}, language = {de} } @article{LandauToland, author = {Landau, Friederike and Toland, Alexandra}, title = {Luft sehen, sprechen, sch{\"u}tzen. Das Anthropoz{\"a}n der (post-)politischen Stadt}, series = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.579}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43305}, pages = {117 -- 136}, abstract = {Der Beitrag verbindet die Diskussion um die postpolitische Stadt mit der zunehmenden wissenschaftlichen und aktivistischen Auseinandersetzung mit dem Anthropoz{\"a}n, ein Konzept, das die {\"o}kologischen und sozialpolitischen Implikationen menschlichen Handelns auf die Erdoberfl{\"a}che beschreibt. Anhand von drei ausgew{\"a}hlten Fallstudien erkunden wir, wie die spezifisch anthropogene, also menschengemachte, Krise urbaner Luftverschmutzung in k{\"u}nstlerischen Positionen problematisiert wird. Im Kontext des potenziellen Vormarschs von Postpolitik besprechen wir, wie der ambivalente Diskurs des Anthropoz{\"a}ns einerseits Depolitisierung beg{\"u}nstigt und andererseits neue M{\"o}glichkeiten f{\"u}r die Repolitisierung globaler Umweltherausforderungen erm{\"o}glicht.}, subject = {Anthropoz{\"a}n}, language = {de} } @article{TutalPartschefeldSchneideretal., author = {Tutal, Adrian and Partschefeld, Stephan and Schneider, Jens and Osburg, Andrea}, title = {Effects of Bio-Based Plasticizers, Made From Starch, on the Properties of Fresh and Hardened Metakaolin-Geopolymer Mortar: Basic Investigations}, series = {Clays and Clay Minerals}, volume = {2020}, journal = {Clays and Clay Minerals}, number = {volume 68, No. 5}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42860-020-00084-8}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44737}, pages = {413 -- 427}, abstract = {Conventional superplasticizers based on polycarboxylate ether (PCE) show an intolerance to clay minerals due to intercalation of their polyethylene glycol (PEG) side chains into the interlayers of the clay mineral. An intolerance to very basic media is also known. This makes PCE an unsuitable choice as a superplasticizer for geopolymers. Bio-based superplasticizers derived from starch showed comparable effects to PCE in a cementitious system. The aim of the present study was to determine if starch superplasticizers (SSPs) could be a suitable additive for geopolymers by carrying out basic investigations with respect to slump, hardening, compressive and flexural strength, shrinkage, and porosity. Four SSPs were synthesized, differing in charge polarity and specific charge density. Two conventional PCE superplasticizers, differing in terms of molecular structure, were also included in this study. The results revealed that SSPs improved the slump of a metakaolin-based geopolymer (MK-geopolymer) mortar while the PCE investigated showed no improvement. The impact of superplasticizers on early hardening (up to 72 h) was negligible. Less linear shrinkage over the course of 56 days was seen for all samples in comparison with the reference. Compressive strengths of SSP specimens tested after 7 and 28 days of curing were comparable to the reference, while PCE led to a decline. The SSPs had a small impact on porosity with a shift to the formation of more gel pores while PCE caused an increase in porosity. Throughout this research, SSPs were identified as promising superplasticizers for MK-geopolymer mortar and concrete.}, subject = {Geopolymere}, language = {en} } @article{BrokowLogaNessler, author = {Brokow-Loga, Anton and Neßler, Miriam}, title = {Eine Frage der Fl{\"a}chengerechtigkeit! Kommentar zu Lisa Vollmer und Boris Michel „Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage"}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.572}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43333}, pages = {183 -- 192}, abstract = {Die derzeitige Wohnungskrise hat eine sozial-{\"o}kologische Kernproblematik. Dabei ist die sozial ungerechte und {\"o}kologisch problematische Verteilung von Wohnfl{\"a}che meist unsichtbar und wird weder in wissenschaftlichen noch in aktivistischen Kontexten ausreichend als Frage der Fl{\"a}chengerechtigkeit problematisiert. Denn Wohnraum und Fl{\"a}che in einer Stadt sind keine endlos verf{\"u}gbaren G{\"u}ter: Wenn einige Menschen auf viel Raum leben, bleibt f{\"u}r andere Menschen weniger Fl{\"a}che {\"u}brig. Und die Menschen, die am wenigstens f{\"u}r eine Verknappung von Wohnraum verantwortlich sind, leiden am meisten darunter. Dieser Artikel arbeitet zun{\"a}chst den Begriff der Wohnfl{\"a}chengerechtigkeit heraus, wobei auf die Ungleichverteilung von Wohnfl{\"a}che und deren gesellschaftliche Implikationen unter derzeitigen Wohnungsverteilungsmechanismen Bezug genommen wird. Anschließend wird der Verbrauch von (Wohn-)Fl{\"a}che aus {\"o}kologischer Perspektive problematisiert. Der Artikel diskutiert scheinbare und transformationsorientierte L{\"o}sungs- und Handlungsans{\"a}tze. Abschließend fordert er in der kritischen Stadtforschung und in aktivistischen Kontexten eine st{\"a}rkere Debatte um eine Wohnfl{\"a}chengerechtigkeit, deren Verwirklichung gleichermaßen eine soziale wie {\"o}kologische Dimension hat.}, subject = {Wohnen}, language = {de} } @article{Schoenig, author = {Sch{\"o}nig, Barbara}, title = {Ererbte Transformation. Kommentar zu Matthias Bernt und Andrej Holm „Die Ostdeutschlandforschung muss das Wohnen in den Blick nehmen"}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 3}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i3.620}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43296}, pages = {115 -- 122}, abstract = {Matthias Bernt und Andrej Holm weisen zu Recht darauf hin, dass es einer Forschung zu ostdeutschen St{\"a}dten als konzeptionell eigenst{\"a}ndigem Feld bedarf, die die spezifische Verr{\"a}umlichung des tiefgreifenden gesellschaftlichen Transformationsprozesses nach 1990 ins Zentrum stellt. Dabei betrachten sie insbesondere das Feld des Wohnens als produktiv, um Kenntnis {\"u}ber die Struktur und Wirkung dieses Prozesses zu erlangen. Allerdings bleiben sie vage dabei, wie eine solche spezifisch auf Ostdeutschland gerichtete Wohnungsforschung zu konzipieren w{\"a}re und in welcher Weise die Besonderheiten und Parallelit{\"a}ten ostdeutscher Entwicklungen zu den Transformationen von Wohnungs- und Stadtentwicklungspolitik in Westdeutschland, aber auch international, in Bezug zu setzen w{\"a}ren.}, subject = {Deutschland <{\"O}stliche L{\"a}nder>}, language = {de} } @misc{Coenen, author = {Coenen, Ekkehard}, title = {Hans Ruin: Being with the Dead—Burial, ancestral politics, and the roots of historical consciousness}, series = {Human Studies}, volume = {2020}, journal = {Human Studies}, number = {Volume 43}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s10746-020-09565-0}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44712}, pages = {683 -- 689}, abstract = {How can society be thought of as something in which the living and the dead interact throughout history? In Being with the Dead. Burial, Ancestral Politics, and the Roots of Historical Consciousness, Hans Ruin turns to the relationship between the living and the dead as well as 'historical consciousness'. He is referring to the expression 'being with the dead' (Mitsein mit dem Toten). Rather en passant, Martin Heidegger (1962: 282) shaped this existential-ontological term, which so far has hardly received any consideration. But for Ruin, it now forms the starting point for his "expanded phenomenological social ontology" (p. XI). By illuminating history and historical consciousness with the category 'being with the dead,' he gains remarkable insights into the meaning of ancestrality. Concerning 'necropolitics,' Ruin shows that the political space includes the living as well as the dead and how they constitute it. The foci of his considerations are the human sciences, above all sociology, anthropology, archaeology, philology and history. Ruin's book aims at a "metacritical thanatology," which he elaborates as "an exploration of the social ontology of being with the dead mediated through critical analyses of the human-historical sciences themselves" (p. XII). As a result, in a total of seven chapters, he succeeds astonishingly in emphasizing the political and ethical importance of a scientific gaze that cultivates the interaction of the living and the dead.}, subject = {Geschichtswissenschaft}, language = {en} } @misc{VollmerMichel, author = {Vollmer, Lisa and Michel, Boris}, title = {Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage: Aufruf zur Debatte}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.552}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43327}, pages = {163 -- 166}, abstract = {Die Verbindung der sozialen und der {\"o}kologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Daf{\"u}r, wie wenig das bisher gelingt, sind die {\"o}ffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der {\"o}kologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beitr{\"a}gen weiter auszuf{\"u}hren und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten.}, subject = {Wohnen}, language = {de} } @article{BandJanizadehChandraPaletal., author = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Chowdhuri, Indrajit and Siabi, Zhaleh and Norouzi, Akbar and Melesse, Assefa M. and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Comparative Analysis of Artificial Intelligence Models for Accurate Estimation of Groundwater Nitrate Concentration}, series = {Sensors}, volume = {2020}, journal = {Sensors}, number = {Volume 20, issue 20, article 5763}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s20205763}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43364}, pages = {1 -- 23}, abstract = {Prediction of the groundwater nitrate concentration is of utmost importance for pollution control and water resource management. This research aims to model the spatial groundwater nitrate concentration in the Marvdasht watershed, Iran, based on several artificial intelligence methods of support vector machine (SVM), Cubist, random forest (RF), and Bayesian artificial neural network (Baysia-ANN) machine learning models. For this purpose, 11 independent variables affecting groundwater nitrate changes include elevation, slope, plan curvature, profile curvature, rainfall, piezometric depth, distance from the river, distance from residential, Sodium (Na), Potassium (K), and topographic wetness index (TWI) in the study area were prepared. Nitrate levels were also measured in 67 wells and used as a dependent variable for modeling. Data were divided into two categories of training (70\%) and testing (30\%) for modeling. The evaluation criteria coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and Nash-Sutcliffe efficiency (NSE) were used to evaluate the performance of the models used. The results of modeling the susceptibility of groundwater nitrate concentration showed that the RF (R2 = 0.89, RMSE = 4.24, NSE = 0.87) model is better than the other Cubist (R2 = 0.87, RMSE = 5.18, NSE = 0.81), SVM (R2 = 0.74, RMSE = 6.07, NSE = 0.74), Bayesian-ANN (R2 = 0.79, RMSE = 5.91, NSE = 0.75) models. The results of groundwater nitrate concentration zoning in the study area showed that the northern parts of the case study have the highest amount of nitrate, which is higher in these agricultural areas than in other areas. The most important cause of nitrate pollution in these areas is agriculture activities and the use of groundwater to irrigate these crops and the wells close to agricultural areas, which has led to the indiscriminate use of chemical fertilizers by irrigation or rainwater of these fertilizers is washed and penetrates groundwater and pollutes the aquifer.}, subject = {Grundwasser}, language = {en} } @article{SaqlaiGhaniKhanetal., author = {Saqlai, Syed Muhammad and Ghani, Anwar and Khan, Imran and Ahmed Khan Ghayyur, Shahbaz and Shamshirband, Shahaboddin and Nabipour, Narjes and Shokri, Manouchehr}, title = {Image Analysis Using Human Body Geometry and Size Proportion Science for Action Classification}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {volume 10, issue 16, article 5453}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10165453}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200904-42322}, pages = {24}, abstract = {Gestures are one of the basic modes of human communication and are usually used to represent different actions. Automatic recognition of these actions forms the basis for solving more complex problems like human behavior analysis, video surveillance, event detection, and sign language recognition, etc. Action recognition from images is a challenging task as the key information like temporal data, object trajectory, and optical flow are not available in still images. While measuring the size of different regions of the human body i.e., step size, arms span, length of the arm, forearm, and hand, etc., provides valuable clues for identification of the human actions. In this article, a framework for classification of the human actions is presented where humans are detected and localized through faster region-convolutional neural networks followed by morphological image processing techniques. Furthermore, geometric features from human blob are extracted and incorporated into the classification rules for the six human actions i.e., standing, walking, single-hand side wave, single-hand top wave, both hands side wave, and both hands top wave. The performance of the proposed technique has been evaluated using precision, recall, omission error, and commission error. The proposed technique has been comparatively analyzed in terms of overall accuracy with existing approaches showing that it performs well in contrast to its counterparts.}, subject = {Bildanalyse}, language = {en} } @article{Buschow, author = {Buschow, Christopher}, title = {Practice-driven journalism research: Impulses for a dynamic understanding of journalism in the context of its reorganization}, series = {Studies in Communication Sciences}, volume = {2020}, journal = {Studies in Communication Sciences}, doi = {10.24434/j.scoms.2020.02.006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200819-42162}, pages = {1 -- 15}, abstract = {This paper proposes a practice-theoretical journalism research approach for an alternate and innovative perspective of digital journalism's current empirical challenges. The practice-theoretical approach is introduced by demonstrating its explanatory power in relation to demarcation problems, technological changes, economic challenges and challenges to journalism's legitimacy. Its respective advantages in dealing with these problems are explained and then compared to established journalism theories. The particular relevance of the theoretical perspective is due to (1) its central decision to observe journalistic practices, (2) the transgression of conventional journalistic boundaries, (3) the denaturalization of journalistic norms and laws, (4) the explicit consideration of a material, socio-technical dimension of journalism, (5) a focus on the conflicting relationship between journalistic practices and media management practices, and (6) prioritizing order generation over stability.}, subject = {Journalismus}, language = {en} } @article{AlsaadVoelker, author = {Alsaad, Hayder and V{\"o}lker, Conrad}, title = {Could the ductless personalized ventilation be an alternative to the regular ducted personalized ventilation?}, series = {Indoor Air}, volume = {2020}, journal = {Indoor Air}, publisher = {John Wiley \& Sons Ltd}, doi = {10.1111/ina.12720}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200805-42072}, pages = {13}, abstract = {This study investigates the performance of two systems: personalized ventilation (PV) and ductless personalized ventilation (DPV). Even though the literature indicates a compelling performance of PV, it is not often used in practice due to its impracticality. Therefore, the present study assesses the possibility of replacing the inflexible PV with DPV in office rooms equipped with displacement ventilation (DV) in the summer season. Numerical simulations were utilized to evaluate the inhaled concentration of pollutants when PV and DPV are used. The systems were compared in a simulated office with two occupants: a susceptible occupant and a source occupant. Three types of pollution were simulated: exhaled infectious air, dermally emitted contamination, and room contamination from a passive source. Results indicated that PV improved the inhaled air quality regardless of the location of the pollution source; a higher PV supply flow rate positively impacted the inhaled air quality. Contrarily, the performance of DPV was highly sensitive to the source location and the personalized flow rate. A higher DPV flow rate tends to decrease the inhaled air quality due to increased mixing of pollutants in the room. Moreover, both systems achieved better results when the personalized system of the source occupant was switched off.}, subject = {Str{\"o}mungsmechanik}, language = {en} } @article{MengNomanQasemShokrietal., author = {Meng, Yinghui and Noman Qasem, Sultan and Shokri, Manouchehr and Shamshirband, Shahaboddin}, title = {Dimension Reduction of Machine Learning-Based Forecasting Models Employing Principal Component Analysis}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {volume 8, issue 8, article 1233}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math8081233}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200811-42125}, pages = {15}, abstract = {In this research, an attempt was made to reduce the dimension of wavelet-ANFIS/ANN (artificial neural network/adaptive neuro-fuzzy inference system) models toward reliable forecasts as well as to decrease computational cost. In this regard, the principal component analysis was performed on the input time series decomposed by a discrete wavelet transform to feed the ANN/ANFIS models. The models were applied for dissolved oxygen (DO) forecasting in rivers which is an important variable affecting aquatic life and water quality. The current values of DO, water surface temperature, salinity, and turbidity have been considered as the input variable to forecast DO in a three-time step further. The results of the study revealed that PCA can be employed as a powerful tool for dimension reduction of input variables and also to detect inter-correlation of input variables. Results of the PCA-wavelet-ANN models are compared with those obtained from wavelet-ANN models while the earlier one has the advantage of less computational time than the later models. Dealing with ANFIS models, PCA is more beneficial to avoid wavelet-ANFIS models creating too many rules which deteriorate the efficiency of the ANFIS models. Moreover, manipulating the wavelet-ANFIS models utilizing PCA leads to a significant decreasing in computational time. Finally, it was found that the PCA-wavelet-ANN/ANFIS models can provide reliable forecasts of dissolved oxygen as an important water quality indicator in rivers.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Oucif, author = {Oucif, Chahmi}, title = {Analytical Modeling of Self-Healing and Super Healing in Cementitious Materials}, doi = {10.25643/bauhaus-universitaet.4229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200831-42296}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {208}, abstract = {Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken. The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history. In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain. Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics. In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied.}, subject = {Schaden}, language = {en} } @phdthesis{Chan, author = {Chan, Chiu Ling}, title = {Smooth representation of thin shells and volume structures for isogeometric analysis}, doi = {10.25643/bauhaus-universitaet.4208}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200812-42083}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {162}, abstract = {The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of "isoparametric", for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.}, subject = {Modellierung}, language = {en} } @phdthesis{Roeder, author = {R{\"o}der, Nina}, title = {Formen des Lassens: Performative Strategien der Bildwerdung in der Inszenierten Fotografie}, doi = {10.25643/bauhaus-universitaet.4214}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200817-42142}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {149}, abstract = {Der Forschungsgegenstand dieser Arbeit basiert auf einer ph{\"a}nomenologischen Beobachtung internationaler fotografischer Positionen des Selbstportraits, welche seit den 1960er-Jahren verwandte Inhalte, gleichartige bild{\"a}sthetische Merkmale und {\"a}hnliche Prozesse im fotografischen Herstellungsprozess aufweisen. Gemeinsam haben die in dieser Arbeit besprochenen K{\"u}nstler*innen, dass sich ihre Bildwerdung am eigenen K{\"o}rper vollzieht und an einen durch Bewegung gekennzeichneten Handlungsablauf gekn{\"u}pft ist. Die jeweilige Bildsprache weist eine ephemere {\"A}sthetik aus, in welcher inhaltlich sowohl der physische als auch der philosophisch gemeinte Begriff des (Los-)lassens eine Rolle spielt. Die k{\"u}nstlerischen Positionen, die Gegenstand dieser Ph.D.-Arbeit sind, umfassen Arbeiten von Bas Jan Ader (1942 - 1975), Francesca Woodman (1958 - 1981), Bernhard (1937 - 2011) und Anna Blume (*1937), Antoine d'Agata (*1961) und Tom Pope (*1986).}, subject = {Fotografie}, language = {de} } @book{BieberBuskeElertetal., author = {Bieber, Constanze and Buske, Johann and Elert, Robert and G{\"o}bel, Hannah and Gripp, David and Hempel, Anne-Mareike and Hummitzsch, Ruben and Kamigashima Kohmann, Laelia and Klocke, Johanna and Mann, Michael and Mitzenheim, Robert and Oehler, Louis and Pfeffer, Edna and Pfeiffer, Julia and Pieper, Kai and Schwarz, Philipp and Zeyse, Samuel}, title = {Barf{\"u}ßerkirche Erfurt: Weiterbauen an der Ruine}, editor = {Angermann, Kirsten and Engelmann, Iris and Horn, Karsten}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4203}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200727-42037}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {119}, abstract = {Die Ruine der Barf{\"u}ßerkirche in Erfurt stellt eine der letzten Erinnerungen an die Zerst{\"o}rungen der Stadt im Zweiten Weltkrieg dar. Sie wird bis heute tempor{\"a}r und saisonal kulturell genutzt. Im Rahmen eines Studienprojektes im Sommersemester 2019 wurden an der Bauhaus-Universit{\"a}t Weimar, betreut durch die Professur Denkmalpflege und Baugeschichte und unterst{\"u}tzt vom Initiativkreis Barf{\"u}ßerkirche, Nutzungskonzepte f{\"u}r ein Museum f{\"u}r Mittelalterkunst und f{\"u}r einen Tagungsort untersucht. Der vorliegende Band dokumentiert die 14 studentischen Entw{\"u}rfe, die f{\"u}r ein Weiterbauen an der Barf{\"u}ßerkirche entstanden sind.}, subject = {Architektur}, language = {de} } @phdthesis{Gretzki, author = {Gretzki, Allan}, title = {BundeskunstHall of Fame - Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext}, doi = {10.25643/bauhaus-universitaet.4215}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200818-42158}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {228}, abstract = {Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext}, subject = {Graffito}, language = {de} } @article{Buschow, author = {Buschow, Christopher}, title = {Why Do Digital Native News Media Fail? An Investigation of Failure in the Early Start-Up Phase}, series = {Media and Communication}, volume = {2020}, journal = {Media and Communication}, number = {Volume 8, Issue 2}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/mac.v8i2.2677}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200417-41347}, pages = {51 -- 61}, abstract = {Digital native news media have great potential for improving journalism. Theoretically, they can be the sites where new products, novel revenue streams and alternative ways of organizing digital journalism are discovered, tested, and advanced. In practice, however, the situation appears to be more complicated. Besides the normal pressures facing new businesses, entrepreneurs in digital news are faced with specific challenges. Against the background of general and journalism specific entrepreneurship literature, and in light of a practice-theoretical approach, this qualitative case study research on 15 German digital native news media outlets empirically investigates what barriers curb their innovative capacity in the early start-up phase. In the new media organizations under study here, there are—among other problems—a high degree of homogeneity within founding teams, tensions between journalistic and economic practices, insufficient user orientation, as well as a tendency for organizations to be underfinanced. The patterns of failure investigated in this study can raise awareness, help news start-ups avoid common mistakes before actually entering the market, and help industry experts and investors to realistically estimate the potential of new ventures within the digital news industry.}, subject = {Journalismus}, language = {en} } @article{HarirchianLahmerBuddhirajuetal., author = {Harirchian, Ehsan and Lahmer, Tom and Buddhiraju, Sreekanth and Mohammad, Kifaytullah and Mosavi, Amir}, title = {Earthquake Safety Assessment of Buildings through Rapid Visual Screening}, series = {Buildings}, volume = {2020}, journal = {Buildings}, number = {Volume 10, Issue 3}, publisher = {MDPI}, doi = {10.3390/buildings10030051}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200331-41153}, pages = {15}, abstract = {Earthquake is among the most devastating natural disasters causing severe economical, environmental, and social destruction. Earthquake safety assessment and building hazard monitoring can highly contribute to urban sustainability through identification and insight into optimum materials and structures. While the vulnerability of structures mainly depends on the structural resistance, the safety assessment of buildings can be highly challenging. In this paper, we consider the Rapid Visual Screening (RVS) method, which is a qualitative procedure for estimating structural scores for buildings suitable for medium- to high-seismic cases. This paper presents an overview of the common RVS methods, i.e., FEMA P-154, IITK-GGSDMA, and EMPI. To examine the accuracy and validation, a practical comparison is performed between their assessment and observed damage of reinforced concrete buildings from a street survey in the Bing{\"o}l region, Turkey, after the 1 May 2003 earthquake. The results demonstrate that the application of RVS methods for preliminary damage estimation is a vital tool. Furthermore, the comparative analysis showed that FEMA P-154 creates an assessment that overestimates damage states and is not economically viable, while EMPI and IITK-GGSDMA provide more accurate and practical estimation, respectively.}, subject = {Maschinelles Lernen}, language = {en} } @article{HarirchianLahmer, author = {Harirchian, Ehsan and Lahmer, Tom}, title = {Improved Rapid Visual Earthquake Hazard Safety Evaluation of Existing Buildings Using a Type-2 Fuzzy Logic Model}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, Issue 3, 2375}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10072375}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200331-41161}, pages = {14}, abstract = {Rapid Visual Screening (RVS) is a procedure that estimates structural scores for buildings and prioritizes their retrofit and upgrade requirements. Despite the speed and simplicity of RVS, many of the collected parameters are non-commensurable and include subjectivity due to visual observations. This might cause uncertainties in the evaluation, which emphasizes the use of a fuzzy-based method. This study aims to propose a novel RVS methodology based on the interval type-2 fuzzy logic system (IT2FLS) to set the priority of vulnerable building to undergo detailed assessment while covering uncertainties and minimizing their effects during evaluation. The proposed method estimates the vulnerability of a building, in terms of Damage Index, considering the number of stories, age of building, plan irregularity, vertical irregularity, building quality, and peak ground velocity, as inputs with a single output variable. Applicability of the proposed method has been investigated using a post-earthquake damage database of reinforced concrete buildings from the Bing{\"o}l and D{\"u}zce earthquakes in Turkey.}, subject = {Fuzzy-Logik}, language = {en} } @article{MousaviSteinkeJuniorTeixeiraetal., author = {Mousavi, Seyed Nasrollah and Steinke J{\´u}nior, Renato and Teixeira, Eder Daniel and Bocchiola, Daniele and Nabipour, Narjes and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Predictive Modeling the Free Hydraulic Jumps Pressure through Advanced Statistical Methods}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {Volume 8, Issue 3, 323}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math8030323}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41140}, pages = {16}, abstract = {Pressure fluctuations beneath hydraulic jumps potentially endanger the stability of stilling basins. This paper deals with the mathematical modeling of the results of laboratory-scale experiments to estimate the extreme pressures. Experiments were carried out on a smooth stilling basin underneath free hydraulic jumps downstream of an Ogee spillway. From the probability distribution of measured instantaneous pressures, pressures with different probabilities could be determined. It was verified that maximum pressure fluctuations, and the negative pressures, are located at the positions near the spillway toe. Also, minimum pressure fluctuations are located at the downstream of hydraulic jumps. It was possible to assess the cumulative curves of pressure data related to the characteristic points along the basin, and different Froude numbers. To benchmark the results, the dimensionless forms of statistical parameters include mean pressures (P*m), the standard deviations of pressure fluctuations (σ*X), pressures with different non-exceedance probabilities (P*k\%), and the statistical coefficient of the probability distribution (Nk\%) were assessed. It was found that an existing method can be used to interpret the present data, and pressure distribution in similar conditions, by using a new second-order fractional relationships for σ*X, and Nk\%. The values of the Nk\% coefficient indicated a single mean value for each probability.}, subject = {Maschinelles Lernen}, language = {en} } @article{JilteAhmadiKumaretal., author = {Jilte, Ravindra and Ahmadi, Mohammad Hossein and Kumar, Ravinder and Kalamkar, Vilas and Mosavi, Amir}, title = {Cooling Performance of a Novel Circulatory Flow Concentric Multi-Channel Heat Sink with Nanofluids}, series = {Nanomaterials}, volume = {2020}, journal = {Nanomaterials}, number = {Volume 10, Issue 4, 647}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/nano10040647}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200401-41241}, pages = {12}, abstract = {Heat rejection from electronic devices such as processors necessitates a high heat removal rate. The present study focuses on liquid-cooled novel heat sink geometry made from four channels (width 4 mm and depth 3.5 mm) configured in a concentric shape with alternate flow passages (slot of 3 mm gap). In this study, the cooling performance of the heat sink was tested under simulated controlled conditions.The lower bottom surface of the heat sink was heated at a constant heat flux condition based on dissipated power of 50 W and 70 W. The computations were carried out for different volume fractions of nanoparticles, namely 0.5\% to 5\%, and water as base fluid at a flow rate of 30 to 180 mL/min. The results showed a higher rate of heat rejection from the nanofluid cooled heat sink compared with water. The enhancement in performance was analyzed with the help of a temperature difference of nanofluid outlet temperature and water outlet temperature under similar operating conditions. The enhancement was ~2\% for 0.5\% volume fraction nanofluids and ~17\% for a 5\% volume fraction.}, subject = {Nanostrukturiertes Material}, language = {en} } @article{FathiSajadzadehMohammadiSheshkaletal., author = {Fathi, Sadegh and Sajadzadeh, Hassan and Mohammadi Sheshkal, Faezeh and Aram, Farshid and Pinter, Gergo and Felde, Imre and Mosavi, Amir}, title = {The Role of Urban Morphology Design on Enhancing Physical Activity and Public Health}, series = {International Journal of Environmental Research and Public Health}, volume = {2020}, journal = {International Journal of Environmental Research and Public Health}, number = {Volume 17, Issue 7, 2359}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ijerph17072359}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41225}, pages = {29}, abstract = {Along with environmental pollution, urban planning has been connected to public health. The research indicates that the quality of built environments plays an important role in reducing mental disorders and overall health. The structure and shape of the city are considered as one of the factors influencing happiness and health in urban communities and the type of the daily activities of citizens. The aim of this study was to promote physical activity in the main structure of the city via urban design in a way that the main form and morphology of the city can encourage citizens to move around and have physical activity within the city. Functional, physical, cultural-social, and perceptual-visual features are regarded as the most important and effective criteria in increasing physical activities in urban spaces, based on literature review. The environmental quality of urban spaces and their role in the physical activities of citizens in urban spaces were assessed by using the questionnaire tool and analytical network process (ANP) of structural equation modeling. Further, the space syntax method was utilized to evaluate the role of the spatial integration of urban spaces on improving physical activities. Based on the results, consideration of functional diversity, spatial flexibility and integration, security, and the aesthetic and visual quality of urban spaces plays an important role in improving the physical health of citizens in urban spaces. Further, more physical activities, including motivation for walking and the sense of public health and happiness, were observed in the streets having higher linkage and space syntax indexes with their surrounding texture.}, subject = {Morphologie}, language = {en} } @misc{Froehlich, type = {Master Thesis}, author = {Fr{\"o}hlich, Jan}, title = {On systematic approaches for interpreted information transfer of inspection data from bridge models to structural analysis}, doi = {10.25643/bauhaus-universitaet.4131}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200416-41310}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {82}, abstract = {In conjunction with the improved methods of monitoring damage and degradation processes, the interest in reliability assessment of reinforced concrete bridges is increasing in recent years. Automated imagebased inspections of the structural surface provide valuable data to extract quantitative information about deteriorations, such as crack patterns. However, the knowledge gain results from processing this information in a structural context, i.e. relating the damage artifacts to building components. This way, transformation to structural analysis is enabled. This approach sets two further requirements: availability of structural bridge information and a standardized storage for interoperability with subsequent analysis tools. Since the involved large datasets are only efficiently processed in an automated manner, the implementation of the complete workflow from damage and building data to structural analysis is targeted in this work. First, domain concepts are derived from the back-end tasks: structural analysis, damage modeling, and life-cycle assessment. The common interoperability format, the Industry Foundation Class (IFC), and processes in these domains are further assessed. The need for usercontrolled interpretation steps is identified and the developed prototype thus allows interaction at subsequent model stages. The latter has the advantage that interpretation steps can be individually separated into either a structural analysis or a damage information model or a combination of both. This approach to damage information processing from the perspective of structural analysis is then validated in different case studies.}, subject = {Br{\"u}ckenbau}, language = {en} } @phdthesis{RadmardRahmani, author = {Radmard Rahmani, Hamid}, title = {Artificial Intelligence Approach for Seismic Control of Structures}, doi = {10.25643/bauhaus-universitaet.4135}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200417-41359}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Abstract In the first part of this research, the utilization of tuned mass dampers in the vibration control of tall buildings during earthquake excitations is studied. The main issues such as optimizing the parameters of the dampers and studying the effects of frequency content of the target earthquakes are addressed. Abstract The non-dominated sorting genetic algorithm method is improved by upgrading generic operators, and is utilized to develop a framework for determining the optimum placement and parameters of dampers in tall buildings. A case study is presented in which the optimal placement and properties of dampers are determined for a model of a tall building under different earthquake excitations through computer simulations. Abstract In the second part, a novel framework for the brain learning-based intelligent seismic control of smart structures is developed. In this approach, a deep neural network learns how to improve structural responses during earthquake excitations using feedback control. Abstract Reinforcement learning method is improved and utilized to develop a framework for training the deep neural network as an intelligent controller. The efficiency of the developed framework is examined through two case studies including a single-degree-of-freedom system and a high-rise building under different earthquake excitation records. Abstract The results show that the controller gradually develops an optimum control policy to reduce the vibrations of a structure under an earthquake excitation through a cyclical process of actions and observations. Abstract It is shown that the controller efficiently improves the structural responses under new earthquake excitations for which it was not trained. Moreover, it is shown that the controller has a stable performance under uncertainties.}, subject = {Erdbeben}, language = {en} } @techreport{BonhagDeRosaBoettgerGynzRekowski, author = {Bonhag-De Rosa, Katharina and Boettger, Till and Gynz-Rekowski, Christoph von}, title = {The "Stapelhaus": Experimental building project on the campus of the Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.4113}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200325-41139}, pages = {49}, abstract = {The project is a cooperation between the bauhaus.ifex and MFPA Weimar and is intended to develop step by step as an experimental student village. Special focus is given to sustainability and construction using different building materials. For the construction of the first room module, CemCel was chosen as a new, lightweight and fibre-based building material.}, subject = {Architecture}, language = {en} } @masterthesis{Wild, type = {Bachelor Thesis}, author = {Wild, Lena}, title = {Patient l{\"a}ndlicher Raum. Planungen und F{\"o}rdermaßnahmen zur Sicherstellung der medizinischen Versorgung in Th{\"u}ringen}, doi = {10.25643/bauhaus-universitaet.4340}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210121-43400}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {83}, abstract = {Die Sicherstellung der medizinischen Versorgung in der Bundesrepublik wird seit einigen Jahren verst{\"a}rkt diskutiert. Besonders in l{\"a}ndliche Regionen ist die Gew{\"a}hrleistung einer bedarfsgerechten medizinischen Versorgung problematisch. L{\"a}ngst ist dies zu einem gesamtgesellschaftlichen Thema geworden. Die Bachelorarbeit von Lena Wild untersucht die Schnittstelle von r{\"a}umlicher Planung und medizinischer Planung mit der Frage „Inwiefern leisten die derzeitigen Planungen und F{\"o}rderprogramme einen positiven Beitrag zur Sicherstellung der medizinischen Versorgung im l{\"a}ndlichen Raum Th{\"u}ringens?" Neben einer Literatur- und Datenanalyse stehen Expert:inneninterviews mit verschiedenen kommunalen und medizinischen Akteur:innen aus ausgew{\"a}hlten Landkreisen in Th{\"u}ringen im Fokus der Arbeit. Nach einer Einordnung der medizinischen Versorgung in den Kontext der r{\"a}umlichen Planung wird eine {\"U}bersicht {\"u}ber das Gesundheitssystem der Bundesrepublik und die Besonderheiten in Ostdeutschland gegeben. Darauffolgend werden Instrumente zur Steuerung der medizinischen Versorgung genauer untersucht. Besonders die kassen{\"a}rztliche Bedarfsplanung als zentrales Steuerungsinstrument und die F{\"o}rderm{\"o}glichkeiten in Th{\"u}ringen und deren Wirkungsweisen stehen dabei im Fokus. Im Weiteren wird auf l{\"a}ndliche R{\"a}ume und deren Herausforderungen f{\"u}r die Sicherstellung der medizinischen Versorgung und die Kommunikation und Zusammenarbeit der Akteur:innen eingegangen. Die Arbeit ist als Exkurs der Raumplanung in eine Fachplanung zu verstehen. Zwischen medizinischer Fachplanung und r{\"a}umlicher Planung bestehen Wechselwirkungen. Das Kennen von Instrumenten und Wirkungsweisen der anderen Disziplin schafft dabei einen Mehrwert, um gemeinsame Ziele, wie die fl{\"a}chendeckende medizinische Versorgung und damit einhergehend eine nachhaltige r{\"a}umliche Entwicklung, zu erreichen.}, subject = {L{\"a}ndlicher Raum}, language = {de} } @article{Batra, author = {Batra, Ritika}, title = {Gauging the stakeholders' perspective: towards PPP in building sectors and housing}, series = {Journal of Housing and the Built Environment}, volume = {2020}, journal = {Journal of Housing and the Built Environment}, number = {volume 35}, publisher = {SpringerNature}, address = {Cham}, doi = {10.1007/s10901-020-09754-4}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210413-44124}, pages = {1123 -- 1156}, abstract = {While Public-Private Partnership (PPP) is widely adopted across various sectors, it raises a question on its meagre utilisation in the housing sector. This paper, therefore, gauges the perspective of the stakeholders in the building industry towards the application of PPP in various building sectors together with housing. It assesses the performance reliability of PPP for housing by learning possible take-aways from other sectors. The role of key stakeholders in the industry becomes highly responsible for an informed understanding and decision-making. To this end, a two-tier investigation was conducted including surveys and expert interviews, with several stakeholders in the PPP industry in Europe, involving the public sector, private sector, consultants, as well as other community/user representatives. The survey results demonstrated the success rate with PPPs, major factors important for PPPs such as profitability or end-user acceptability, the prevalent practices and trends in the PPP world, and the majority of support expressed in favour of the suitability of PPP for housing. The interviews added more detailed dimensions to the understanding of the PPP industry, its functioning and enabling the formation of a comprehensive outlook. The results present the perspective, approaches, and experiences of stakeholders over PPP practices, current trends and scenarios and their take on PPP in housing. It shall aid in understanding the challenges prevalent in the PPP approach for implementation in housing and enable the policymakers and industry stakeholders to make provisions for higher uptake to accelerate housing provision.}, subject = {{\"O}ffentlich-private Partnerschaft}, language = {en} } @article{WellbrockArangoKureBuschow, author = {Wellbrock, Christian-Mathias and Arango Kure, Maria and Buschow, Christopher}, title = {Competition and Media Performance: A Cross-National Analysis of Corporate Goals of Media Companies in 12 Countries}, series = {International Journal of Communication}, volume = {2020}, journal = {International Journal of Communication}, number = {Vol 14 (2020)}, publisher = {USC, University of Southern California}, address = {Annenberg, California}, doi = {10.25643/bauhaus-universitaet.4317}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201221-43175}, pages = {6154 -- 6181}, abstract = {Despite digitization and platformization, mass media and established media companies still play a crucial role in the provision of journalistic content in democratic societies. Competition is one key driver of (media) company behavior and is considered to have an impact on the media's performance. However, theory and empirical research are ambiguous about the relationship. The objective of this article is to empirically analyze the effect of competition on media performance in a cross-national context. We assessed media performance of media companies as the importance of journalistic goals within their stated corporate goal system. We conducted a content analysis of letters to the shareholders in annual reports of more than 50 media companies from 2000 to 2014 to operationalize journalistic goal importance. When employing a fixed effects regression analysis, as well as a fuzzy set qualitative comparative analysis, results suggest that competition has a positive effect on the importance of journalistic goals, while the existence of a strong public service media sector appears to have the effect of "crowding out" commercial media companies.}, subject = {{\"O}ffentlich-rechtlicher Rundfunk}, language = {en} } @article{MosaviShokriMansoretal., author = {Mosavi, Amir Hosein and Shokri, Manouchehr and Mansor, Zulkefli and Qasem, Sultan Noman and Band, Shahab S. and Mohammadzadeh, Ardashir}, title = {Machine Learning for Modeling the Singular Multi-Pantograph Equations}, series = {Entropy}, volume = {2020}, journal = {Entropy}, number = {volume 22, issue 9, article 1041}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/e22091041}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43436}, pages = {1 -- 18}, abstract = {In this study, a new approach to basis of intelligent systems and machine learning algorithms is introduced for solving singular multi-pantograph differential equations (SMDEs). For the first time, a type-2 fuzzy logic based approach is formulated to find an approximated solution. The rules of the suggested type-2 fuzzy logic system (T2-FLS) are optimized by the square root cubature Kalman filter (SCKF) such that the proposed fineness function to be minimized. Furthermore, the stability and boundedness of the estimation error is proved by novel approach on basis of Lyapunov theorem. The accuracy and robustness of the suggested algorithm is verified by several statistical examinations. It is shown that the suggested method results in an accurate solution with rapid convergence and a lower computational cost.}, subject = {Fuzzy-Regelung}, language = {en} } @phdthesis{Bunte, author = {Bunte, Andreas}, title = {Entwicklung einer ontologiebasierten Beschreibung zur Erh{\"o}hung des Automatisierungsgrades in der Produktion}, doi = {10.25643/bauhaus-universitaet.4315}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201215-43156}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {189}, abstract = {Die zu beobachtenden k{\"u}rzeren Produktlebenszyklen und eine schnellere Marktdurchdringung von Produkttechnologien erfordern adaptive und leistungsf{\"a}hige Produktionsanlagen. Die Adaptivit{\"a}t erm{\"o}glicht eine Anpassung der Produktionsanlage an neue Produkte, und die Leistungsf{\"a}higkeit der Anlage stellt sicher, dass ausreichend Produkte in kurzer Zeit und zu geringen Kosten hergestellt werden k{\"o}nnen. Durch eine Modularisierung der Produktionsanlage kann die Adaptivit{\"a}t erreicht werden. Jedoch erfordert heutzutage jede Adaption manuellen Aufwand, z.B. zur Anpassung von propriet{\"a}ren Signalen oder zur Anpassung {\"u}bergeordneter Funktionen. Dadurch sinkt die Leistungsf{\"a}higkeit der Anlage. Das Ziel dieser Arbeit ist es, die Interoperabilit{\"a}t in Bezug auf die Informationsverwendung in modularen Produktionsanlagen zu gew{\"a}hrleisten. Dazu werden Informationen durch semantische Modelle beschrieben. Damit wird ein einheitlicher Informationszugriff erm{\"o}glicht, und {\"u}bergeordnete Funktionen erhalten Zugriff auf alle Informationen der Produktionsmodule, unabh{\"a}ngig von dem Typ, dem Hersteller und dem Alter des Moduls. Dadurch entf{\"a}llt der manuelle Aufwand bei Anpassungen des modularen Produktionssystems, wodurch die Leistungsf{\"a}higkeit der Anlage gesteigert und Stillstandszeiten reduziert werden. Nach dem Ermitteln der Anforderungen an einen Modellierungsformalismus wurden potentielle Formalismen mit den Anforderungen abgeglichen. OWL DL stellte sich als geeigneter Formalismus heraus und wurde f{\"u}r die Erstellung des semantischen Modells in dieser Arbeit verwendet. Es wurde exemplarisch ein semantisches Modell f{\"u}r die drei Anwendungsf{\"a}lle Interaktion, Orchestrierung und Diagnose erstellt. Durch einen Vergleich der Modellierungselemente von unterschiedlichen Anwendungsf{\"a}llen wurde die Allgemeing{\"u}ltigkeit des Modells bewertet. Dabei wurde gezeigt, dass die Erreichung eines allgemeinen Modells f{\"u}r technische Anwendungsf{\"a}lle m{\"o}glich ist und lediglich einige Hundert Begriffe ben{\"o}tigt. Zur Evaluierung der erstellten Modelle wurde ein wandlungsf{\"a}higes Produktionssystem der SmartFactoryOWL verwendet, an dem die Anwendungsf{\"a}lle umgesetzt wurden. Dazu wurde eine Laufzeitumgebung erstellt, die die semantischen Modelle der einzelnen Module zu einem Gesamtmodell vereint, Daten aus der Anlage in das Modell {\"u}bertr{\"a}gt und eine Schnittstelle f{\"u}r die Services bereitstellt. Die Services realisieren {\"u}bergeordnete Funktionen und verwenden die Informationen des semantischen Modells. In allen drei Anwendungsf{\"a}llen wurden die semantischen Modelle korrekt zusammengef{\"u}gt und mit den darin enthaltenen Informationen konnte die Aufgabe des jeweiligen Anwendungsfalles ohne zus{\"a}tzlichen manuellen Aufwand gel{\"o}st werden.}, subject = {Ontologie}, language = {de} } @article{KarimimoshaverHajivalieiShokrietal., author = {Karimimoshaver, Mehrdad and Hajivaliei, Hatameh and Shokri, Manouchehr and Khalesro, Shakila and Aram, Farshid and Shamshirband, Shahaboddin}, title = {A Model for Locating Tall Buildings through a Visual Analysis Approach}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 17, article 6072}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10176072}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43350}, pages = {1 -- 25}, abstract = {Tall buildings have become an integral part of cities despite all their pros and cons. Some current tall buildings have several problems because of their unsuitable location; the problems include increasing density, imposing traffic on urban thoroughfares, blocking view corridors, etc. Some of these buildings have destroyed desirable views of the city. In this research, different criteria have been chosen, such as environment, access, social-economic, land-use, and physical context. These criteria and sub-criteria are prioritized and weighted by the analytic network process (ANP) based on experts' opinions, using Super Decisions V2.8 software. On the other hand, layers corresponding to sub-criteria were made in ArcGIS 10.3 simultaneously, then via a weighted overlay (map algebra), a locating plan was created. In the next step seven hypothetical tall buildings (20 stories), in the best part of the locating plan, were considered to evaluate how much of theses hypothetical buildings would be visible (fuzzy visibility) from the street and open spaces throughout the city. These processes have been modeled by MATLAB software, and the final fuzzy visibility plan was created by ArcGIS. Fuzzy visibility results can help city managers and planners to choose which location is suitable for a tall building and how much visibility may be appropriate. The proposed model can locate tall buildings based on technical and visual criteria in the future development of the city and it can be widely used in any city as long as the criteria and weights are localized.}, subject = {Geb{\"a}ude}, language = {en} } @article{BandJanizadehSahaetal., author = {Band, Shahab S. and Janizadeh, Saeid and Saha, Sunil and Mukherjee, Kaustuv and Khosrobeigi Bozchaloei, Saeid and Cerd{\`a}, Artemi and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Evaluating the Efficiency of Different Regression, Decision Tree, and Bayesian Machine Learning Algorithms in Spatial Piping Erosion Susceptibility Using ALOS/PALSAR Data}, series = {Land}, volume = {2020}, journal = {Land}, number = {volume 9, issue 10, article 346}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/land9100346}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43424}, pages = {1 -- 22}, abstract = {Piping erosion is one form of water erosion that leads to significant changes in the landscape and environmental degradation. In the present study, we evaluated piping erosion modeling in the Zarandieh watershed of Markazi province in Iran based on random forest (RF), support vector machine (SVM), and Bayesian generalized linear models (Bayesian GLM) machine learning algorithms. For this goal, due to the importance of various geo-environmental and soil properties in the evolution and creation of piping erosion, 18 variables were considered for modeling the piping erosion susceptibility in the Zarandieh watershed. A total of 152 points of piping erosion were recognized in the study area that were divided into training (70\%) and validation (30\%) for modeling. The area under curve (AUC) was used to assess the effeciency of the RF, SVM, and Bayesian GLM. Piping erosion susceptibility results indicated that all three RF, SVM, and Bayesian GLM models had high efficiency in the testing step, such as the AUC shown with values of 0.9 for RF, 0.88 for SVM, and 0.87 for Bayesian GLM. Altitude, pH, and bulk density were the variables that had the greatest influence on the piping erosion susceptibility in the Zarandieh watershed. This result indicates that geo-environmental and soil chemical variables are accountable for the expansion of piping erosion in the Zarandieh watershed.}, subject = {Maschinelles Lernen}, language = {en} } @article{MosaviQasemShokrietal., author = {Mosavi, Amir Hosein and Qasem, Sultan Noman and Shokri, Manouchehr and Band, Shahab S. and Mohammadzadeh, Ardashir}, title = {Fractional-Order Fuzzy Control Approach for Photovoltaic/Battery Systems under Unknown Dynamics, Variable Irradiation and Temperature}, series = {Electronics}, volume = {2020}, journal = {Electronics}, number = {Volume 9, issue 9, article 1455}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/electronics9091455}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43381}, pages = {1 -- 19}, abstract = {For this paper, the problem of energy/voltage management in photovoltaic (PV)/battery systems was studied, and a new fractional-order control system on basis of type-3 (T3) fuzzy logic systems (FLSs) was developed. New fractional-order learning rules are derived for tuning of T3-FLSs such that the stability is ensured. In addition, using fractional-order calculus, the robustness was studied versus dynamic uncertainties, perturbation of irradiation, and temperature and abruptly faults in output loads, and, subsequently, new compensators were proposed. In several examinations under difficult operation conditions, such as random temperature, variable irradiation, and abrupt changes in output load, the capability of the schemed controller was verified. In addition, in comparison with other methods, such as proportional-derivative-integral (PID), sliding mode controller (SMC), passivity-based control systems (PBC), and linear quadratic regulator (LQR), the superiority of the suggested method was demonstrated.}, subject = {Fuzzy-Logik}, language = {en} } @article{PartschefeldWiegandBellmannetal., author = {Partschefeld, Stephan and Wiegand, Torben and Bellmann, Frank and Osburg, Andrea}, title = {Formation of Geopolymers Using Sodium Silicate Solution and Aluminum Orthophosphate}, series = {Materials}, volume = {2020}, journal = {Materials}, number = {Volume 13, issue 18, article 4202}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma13184202}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43378}, pages = {1 -- 16}, abstract = {This paper reports the formation and structure of fast setting geopolymers activated by using three sodium silicate solutions with different modules (1.6, 2.0 and 2.4) and a berlinite-type aluminum orthophosphate. By varying the concentration of the aluminum orthophosphate, different Si/Al-ratios were established (6, 3 and 2). Reaction kinetics of binders were determined by isothermal calorimetric measurements at 20 °C. X-ray diffraction analysis as well as nuclear magnetic resonance (NMR) measurements were performed on binders to determine differences in structure by varying the alkalinity of the sodium silicate solutions and the Si/Al-ratio. The calorimetric results indicated that the higher the alkalinity of the sodium silicate solution, the higher the solubility and degree of conversion of the aluminum orthophosphate. The results of X-ray diffraction and Rietveldt analysis, as well as the NMR measurements, confirmed the assumption of the calorimetric experiments that first the aluminum orthophosphate was dissolved and then a polycondensation to an amorphous aluminosilicate network occurred. The different amounts of amorphous phases formed as a function of the alkalinity of the sodium silicate solution, indicate that tetrahydroxoaluminate species were formed during the dissolution of the aluminum orthophosphate, which reduce the pH value. This led to no further dissolution of the aluminum orthophosphate, which remained unreacted.}, subject = {Geopolymere}, language = {en} } @misc{Pessoa, type = {Master Thesis}, author = {Pessoa, Suelen}, title = {Why do the Archives archive? A journey from the hunko to the counter-ethnography and back}, doi = {10.25643/bauhaus-universitaet.4328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210112-43280}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {A complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candombl{\´e}. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice.}, subject = {K{\"u}nstlerische Forschung}, language = {en} } @phdthesis{Rabizadeh, author = {Rabizadeh, Ehsan}, title = {Goal-oriented A Posteriori Error Estimation and Adaptive Mesh Refinement in 2D/3D Thermoelasticity Problems}, doi = {10.25643/bauhaus-universitaet.4286}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201113-42864}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In recent years, substantial attention has been devoted to thermoelastic multifield problems and their numerical analysis. Thermoelasticity is one of the important categories of multifield problems which deals with the effect of mechanical and thermal disturbances on an elastic body. In other words, thermoelasticity encompasses the phenomena that describe the elastic and thermal behavior of solids and their interactions under thermo-mechanical loadings. Since providing an analytical solution for general coupled thermoelasticity problems is mathematically complicated, the development of alternative numerical solution techniques seems essential. Due to the nature of numerical analysis methods, presence of error in results is inevitable, therefore in any numerical simulation, the main concern is the accuracy of the approximation. There are different error estimation (EE) methods to assess the overall quality of numerical approximation. In many real-life numerical simulations, not only the overall error, but also the local error or error in a particular quantity of interest is of main interest. The error estimation techniques which are developed to evaluate the error in the quantity of interest are known as "goal-oriented" error estimation (GOEE) methods. This project, for the first time, investigates the classical a posteriori error estimation and goal-oriented a posteriori error estimation in 2D/3D thermoelasticity problems. Generally, the a posteriori error estimation techniques can be categorized into two major branches of recovery-based and residual-based error estimators. In this research, application of both recovery- and residual-based error estimators in thermoelasticity are studied. Moreover, in order to reduce the error in the quantity of interest efficiently and optimally in 2D and 3D thermoelastic problems, goal-oriented adaptive mesh refinement is performed. As the first application category, the error estimation in classical Thermoelasticity (CTE) is investigated. In the first step, a rh-adaptive thermo-mechanical formulation based on goal-oriented error estimation is proposed.The developed goal-oriented error estimation relies on different stress recovery techniques, i.e., the superconvergent patch recovery (SPR), L2-projection patch recovery (L2-PR), and weighted superconvergent patch recovery (WSPR). Moreover, a new adaptive refinement strategy (ARS) is presented that minimizes the error in a quantity of interest and refines the discretization such that the error is equally distributed in the refined mesh. The method is validated by numerous numerical examples where an analytical solution or reference solution is available. After investigating error estimation in classical thermoelasticity and evaluating the quality of presented error estimators, we extended the application of the developed goal-oriented error estimation and the associated adaptive refinement technique to the classical fully coupled dynamic thermoelasticity. In this part, we present an adaptive method for coupled dynamic thermoelasticity problems based on goal-oriented error estimation. We use dimensionless variables in the finite element formulation and for the time integration we employ the acceleration-based Newmark-_ method. In this part, the SPR, L2-PR, and WSPR recovery methods are exploited to estimate the error in the quantity of interest (QoI). By using adaptive refinement in space, the error in the quantity of interest is minimized. Therefore, the discretization is refined such that the error is equally distributed in the refined mesh. We demonstrate the efficiency of this method by numerous numerical examples. After studying the recovery-based error estimators, we investigated the residual-based error estimation in thermoelasticity. In the last part of this research, we present a 3D adaptive method for thermoelastic problems based on goal-oriented error estimation where the error is measured with respect to a pointwise quantity of interest. We developed a method for a posteriori error estimation and mesh adaptation based on dual weighted residual (DWR) method relying on the duality principles and consisting of an adjoint problem solution. Here, we consider the application of the derived estimator and mesh refinement to two-/three-dimensional (2D/3D) thermo-mechanical multifield problems. In this study, the goal is considered to be given by singular pointwise functions, such as the point value or point value derivative at a specific point of interest (PoI). An adaptive algorithm has been adopted to refine the mesh to minimize the goal in the quantity of interest. The mesh adaptivity procedure based on the DWR method is performed by adaptive local h-refinement/coarsening with allowed hanging nodes. According to the proposed DWR method, the error contribution of each element is evaluated. In the refinement process, the contribution of each element to the goal error is considered as the mesh refinement criterion. In this study, we substantiate the accuracy and performance of this method by several numerical examples with available analytical solutions. Here, 2D and 3D problems under thermo-mechanical loadings are considered as benchmark problems. To show how accurately the derived estimator captures the exact error in the evaluation of the pointwise quantity of interest, in all examples, considering the analytical solutions, the goal error effectivity index as a standard measure of the quality of an estimator is calculated. Moreover, in order to demonstrate the efficiency of the proposed method and show the optimal behavior of the employed refinement method, the results of different conventional error estimators and refinement techniques (e.g., global uniform refinement, Kelly, and weighted Kelly techniques) are used for comparison.}, subject = {Mesh Refinement}, language = {en} } @phdthesis{Reformat, author = {Reformat, Martin}, title = {Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften}, isbn = {978-3-00-067121-0}, doi = {10.25643/bauhaus-universitaet.4279}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201102-42794}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {224}, abstract = {Die Mahlung als Zerkleinerungsprozess stellt seit den Anf{\"a}ngen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, {\"u}ber das Aufschließen von Heilkr{\"a}utern in M{\"o}rsern bis hin zur Herstellung von Tonern f{\"u}r Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein {\"o}kologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden f{\"u}r Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben r{\"u}ckt. Die Komplexit{\"a}t der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit" ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ans{\"a}tzen gefertigt. Dar{\"u}ber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsf{\"a}hige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erf{\"u}llt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei {\"u}bergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und H{\"u}ttensand angestellt. Um eine m{\"o}glichst effektive Mahlung von Zement und Kompositmaterialien zu gew{\"a}hrleisten, ist es wichtig, die Auswirkung von M{\"u}hlenparametern zu kennen. Hierf{\"u}r wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlk{\"o}rperm{\"u}hlen und mahlk{\"o}rperlosen M{\"u}hlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengef{\"u}ge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker f{\"u}hrten ung{\"u}nstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementpr{\"u}fungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und R{\"u}hrwerkskugelm{\"u}hle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie H{\"u}ttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zus{\"a}tzliche Reaktivit{\"a}t bei gleicher Granulometrie gegen{\"u}ber der herk{\"o}mmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem H{\"u}ttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberfl{\"a}chenvergr{\"o}ßerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erh{\"o}hung der Reaktivit{\"a}t zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberfl{\"a}chendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivit{\"a}tsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgef{\"u}hrt. Im Speziellen wurde untersucht, inwieweit eine R{\"u}ckf{\"u}hrung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf m{\"o}glich ist. Die hierf{\"u}r verwendete Mahltechnik umfasst sowohl konventionelle M{\"u}hlen als auch Hochenergiem{\"u}hlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualit{\"a}t wurde der sogenannte „Aktivierungskoeffizient" eingef{\"u}hrt. Es stellte sich heraus, dass die R{\"u}ckf{\"u}hrung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abh{\"a}ngt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegen{\"u}ber dem mit Gesteinsk{\"o}rnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationsw{\"a}rmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen M{\"u}hlen aufbereitet. Die hier erzielten Ergebnisse k{\"o}nnen teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend.}, subject = {Zement}, language = {de} } @phdthesis{Kunert, author = {Kunert, Andr{\´e}}, title = {3D Interaction Techniques in Multi-User Virtual Reality : towards scalable templates and implementation patterns for cooperative interfaces}, doi = {10.25643/bauhaus-universitaet.4296}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201204-42962}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {147}, abstract = {Multi-user projection systems provide a coherent 3D interaction space for multiple co-located users that facilitates mutual awareness, full-body interaction, and the coordination of activities. The users perceive the shared scene from their respective viewpoints and can directly interact with the 3D content. This thesis reports on novel interaction patterns for collaborative 3D interaction for local and distributed user groups based on such multi-user projection environments. A particular focus of our developments lies in the provision of multiple independent interaction territories in our workspaces and their tight integration into collaborative workflows. The motivation for such multi-focus workspaces is grounded in research on social cooperation patterns, specifically in the requirement for supporting phases of loose and tight collaboration and the emergence of dedicated orking territories for private usage and public exchange. We realized independent interaction territories in the form of handheld virtual viewing windows and multiple co-located hardware displays in a joint workspace. They provide independent views of a shared virtual environment and serve as access points for the exploration and manipulation of the 3D content. Their tight integration into our workspace supports fluent transitions between individual work and joint user engagement. The different affordances of various displays in an exemplary workspace consisting of a large 3D wall, a 3D tabletop, and handheld virtual viewing windows, promote different usage scenarios, for instance for views from an egocentric perspective, miniature scene representations, close-up views, or storage and transfer areas. This work shows that this versatile workspace can make the cooperation of multiple people in joint tasks more effective, e.g. by parallelizing activities, distributing subtasks, and providing mutual support. In order to create, manage, and share virtual viewing windows, this thesis presents the interaction technique of Photoportals, a tangible interface based on the metaphor of digital photography. They serve as configurable viewing territories and enable the individual examination of scene details as well as the immediate sharing of the prepared views. Photoportals are specifically designed to complement other interface facets and provide extended functionality for scene navigation, object manipulation, and for the creation of temporal recordings of activities in the virtual scene. A further objective of this work is the realization of a coherent interaction space for direct 3D input across the independent interaction territories in multi-display setups. This requires the simultaneous consideration of user input in several potential interaction windows as well as configurable disambiguation schemes for the implicit selection of distinct interaction contexts. We generalized the required implementation structures into a high-level software pattern and demonstrated its versatility by means of various multi-context 3D interaction tools. Additionally, this work tackles specific problems related to group navigation in multiuser projection systems. Joint navigation of a collocated group of users can lead to unintentional collisions when passing narrow scene sections. In this context, we suggest various solutions that prevent individual collisions during group navigation and discuss their effect on the perceived integrity of the travel group and the 3D scene. For collaboration scenarios involving distributed user groups, we furthermore explored different configurations for joint and individual travel. Last but not least, this thesis provides detailed information and implementation templates for the realization of the proposed interaction techniques and collaborative workspaces in scenegraph-based VR systems. These contributions to the abstraction of specific interaction patterns, such as group navigation and multi-window interaction, facilitate their reuse in other virtual reality systems and their adaptation to further collaborative scenarios.}, subject = {Virtuelle Realit{\"a}t}, language = {en} } @phdthesis{Rost, author = {Rost, Grit}, title = {Entwicklung eines Toolboxmodells als Planungswerkzeug f{\"u}r ein transdisziplin{\"a}res Wasserressourcenmanagement am Beispiel der Stadt Darkhan, Mongolei}, publisher = {Rhombus}, address = {Berlin}, isbn = {978-3-941216-94-5}, doi = {10.25643/bauhaus-universitaet.4287}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201113-42874}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {172}, abstract = {Im Rahmen der Dissertation wurde ein Toolboxmodell f{\"u}r transdisziplin{\"a}res Wasserressourcenmanagement entwickelt. Das Modell liefert den methodischen Rahmen Wasserressourcen nachhaltig und transdisziplin{\"a}r zu bewirtschaften. Der Begriff der Nachhaltigkeit und eine Konkretisierung der nachhaltigen Bewirtschaftung globaler Wasserressourcen scheinen un{\"u}berschaubar und suggerieren die Forderung nach einer neuen Weltformel. Die globale Bedeutung der Wasserressourcen, die f{\"u}r Regionen spezifischen Besonderheiten des nat{\"u}rlichen Wasserhaushalts und der anthropogenen Nutzung, die Zeitskala und die Kontextualisierung in alle betroffenen und benachbarten Disziplinen deuten auf die Komplexit{\"a}t der Thematik hin. Es wird eine Systematisierung des Planungsprozesses von Wasserressourcen notwendig, anhand derer eine holistische Herangehensweise mit einer Strategieentwicklung f{\"u}r Regionen spezifischer Schwerpunktprobleme erfolgt. Ziel der Arbeit ist die Erarbeitung einer Strategie zur Systematisierung nach diesen Forderungen und die Bereitstellung eines Toolboxmodelles als Planungswerkzeug f{\"u}r das transdisziplin{\"a}re Wasserressourcenmanagement. Das Toolboxmodell stellt den konzeptionellen Rahmen f{\"u}r die Bewirtschaftung von Wasserressourcen mit der Anwendung transdisziplin{\"a}rer Forschungsmethoden bereit. Wesentliche Herausforderung bei der Anwendung der transdisziplin{\"a}ren Methode sind die Implementierung verschiedener Skalenbereiche, der Umgang mit der Komplexit{\"a}t von Daten, das Bewahren von Transparenz und Objektivit{\"a}t sowie die Erm{\"o}glichung eines auf andere Regionen {\"u}bertragbaren Planungsprozesses. Die theoretischen Grundlagen naturwissenschaftlicher Forschung zur Nachhaltigkeit haben ihren Ursprung in den biologischen und geographischen Disziplinen. Das Ineinandergreifen naturr{\"a}umlicher Zusammenh{\"a}nge und der Einfluss anthropogener Nutzung und technischer Innovationen auf den Naturhaushalt sind Kern der Kausalit{\"a}t {\"u}bergreifenden Denkens und Verstehens. Mit dem Ansatz des integrierten Wasserressourcenmanagements (IWRM) erfolgt die Ber{\"u}cksichtigung wirtschaftlicher und sozio{\"o}konomischer Ziele in den Planungsprozess f{\"u}r {\"o}kologisch nachhaltige Wasserwirtschaft. Das Instrument der Wasserrahmenrichtlinie (EU-WRRL) ist auf eine Gew{\"a}sser{\"o}kologie ausgerichtete Richtlinie, welche die Integration verschiedener Interessenvertreter in den Planungsprozess vorsieht. Das Konzept der neuartigen Sanit{\"a}rsysteme basiert auf Stofffl{\"u}ssen zwischen konkurrierenden Handlungsbereichen, wie Abfall-, Ressourcen- und Landwirtschaft. Den integrierten Ans{\"a}tzen fehlt eine {\"u}bergeordnete gemeinsame Zielstrategie - eine sogenannte Phase Null. Diese Phase Null - das Lernen aller 7 Zusammenfassung 157 relevanten, konkurrierenden und harmonisierenden Handlungsfelder eines Planungshorizontes wird durch eine transdisziplin{\"a}re Perspektive erm{\"o}glicht. W{\"a}hrend bei der integralen Perspektive eine disziplinorientierte Kooperation im Vordergrund steht, verlangt die transdisziplin{\"a}re Perspektive nach einer problemorientierten Kooperation zwischen den Interessenvertretern (Werlen 2015). Die bestehenden Konzepte und Richtlinien f{\"u}r das nachhaltige Management von Wasserressourcen sind etabliert und evaluiert. Der Literatur zur Folge ist eine Weiterentwicklung nach der Perspektive der Transdisziplinarit{\"a}t erforderlich. Das Toolboxmodell f{\"u}r integrales Wasserressourcenmanagement entspricht einem Planungstool bestehend aus Werkzeugen f{\"u}r die Anwendung wissenschaftlicher Methoden. Die Zusammenstellung der Methoden/Werkzeuge erf{\"u}llt im Rahmen die Methode transdisziplin{\"a}rer Forschung. Das Werkzeug zum Aufstellen der relevanten Handlungsfelder umfasst die Charakterisierung eines Untersuchungsgebietes und Planungsrahmens, die kausale Verkn{\"u}pfung des Bewirtschaftungskonzeptes und konkurrierender sowie sich unterst{\"u}tzender Stakeholder. Mit dem Werkzeug der Kontextualisierung und Indikatorenaufstellung wird eine Methode der stufenweisen und von einer Skala unabh{\"a}ngigen Bewertung des Umweltzustandes f{\"u}r die Zielpriorisierung vorgenommen. Damit wird das Toolboxmodell dem Problem der Komplexit{\"a}t und Datenverf{\"u}gbarkeit gerecht. Anhand der eingesetzten ABC Methode, werden die Bewertungsgr{\"o}ßen differenziert strukturiert auf verschiedene Skalen und Datenressourcen (A=Ersterkennung,B=Zeigerwerte, C=Modell/Index). Die ABC-Methode erm{\"o}glicht die Planung bereits mit unsicherer und l{\"u}ckenhafter Datengrundlage, ist jederzeit erweiterbar und bietet somit eine operative Wissensgenerierung w{\"a}hrend des Gestaltungsprozesses. F{\"u}r das Werkzeug zur Bewertung und Priorisierung wird der Algorithmus der Composite Programmierung angewandt. Diese Methode der Mehrfachzielplanung erf{\"u}llt den Anspruch der permanenten Erweiterbarkeit und der transparenten und objektiven Entscheidungsfindung. Die Komplexit{\"a}t des transdisziplin{\"a}ren Wasserressourcenmanagements kann durch die Methode der Composite Programmierung systematisiert werden. Das wesentliche Ergebnis der Arbeit stellt die erfolgreiche Erarbeitung und Anwendung des Tool-boxmodells f{\"u}r das transdisziplin{\"a}re Wasserressourcenmanagement im Untersuchungsgebiet Stadt Darkhan in der Mongolei dar. Auf Grund seiner besonderen hydrologischen und strukturellen Situa-tion wird die Relevanz eines nachhaltigen Bewirtschaftungskonzeptes deutlich. Im Rahmen des Querschnittsmoduls des MoMo-Projektes wurde eine f{\"u}r das Toolboxmodell geeignete Datengrundlage erarbeitet. Planungsrelevante Handlungsfelder wurden im Rahmen eines Workshops mit verschiedenen Interessenvertretern erarbeitet. Im Ergebnis dessen wurde die Systematik eines Zielbaumes mit Hauptzielen und untergeordneten Teilzielen als Grundlage der Priorisierung nach den holistischen Anspruch der transdisziplin{\"a}ren Forschung aufgestellt. F{\"u}r die Messbarkeit, in-wieweit Teilziele erreicht sind oder Handlungsbedarf besteht, wurden Indikatoren erarbeitet. Die Indikatoren-Aufstellung erfolgte exemplarisch f{\"u}r das Handlungsfeld Siedlungswasserwirtschaft in allen Skalen des ABC-Systems. Die im BMBF-MoMo Projekt generierte umfassende Datengrundlage erm{\"o}glichte die Anwendung und Evaluierung des Toolboxmodells mit unterschiedlichem quantitativem und qualitativem Dateninput. Verschiedene Kombination von A (Ersterkennung), B (Zeigerwerte) und C (Modell/Index) als Grundlage der Priorisierung mit der Compostite Programmierung erm{\"o}glichten die Durchf{\"u}hrung und Bewertung des transdisziplin{\"a}ren Planungstools. Die er-mittelten Rangfolgen von Teilzielen mit unterschiedlichen Bewertungsvarianten ergaben {\"a}hnliche Tendenzen. Das ist ein Hinweis daf{\"u}r, dass f{\"u}r die zuk{\"u}nftige Anwendung des Toolboxmodells die operative Wissensgenerierung, d.h. das schrittweise Hinzuf{\"u}gen neu ermittelter, gesicherterer Daten, funktioniert. Eine schwierige Datenverf{\"u}gbarkeit oder eine noch im Prozess befindliche wissenschaftliche Analyse sollen keine Hindernisse f{\"u}r eine schrittweise und erweiterbare Zielpriorisierung und Maßnahmenplanung sein. Trotz der Komplexit{\"a}t des transdisziplin{\"a}ren Ansatzes wird durch die Anwendung des Toolboxmodells eine effiziente und zielorientierte Handlungspriorisierung erm{\"o}glicht. Die Effizienz wird erreicht durch ressourcenschonende und flexible, Ziel fokussierte Datenermittlung. Zeit und Kosten im Planungsprozess k{\"o}nnen eingespart werden. Die erzielte Priorisierung von letztlich Handlungsempfehlungen erfolgt individuell auf die Eigenart des Untersuchungsgebietes angepasst, was hinsichtlich seiner Wirkung als erfolgsversprechend gilt.}, subject = {Wasserreserve}, language = {de} } @phdthesis{Markert, author = {Markert, Michael}, title = {R{\"a}umliche Navigation durch richtungsgebundene Stereofonie}, doi = {10.25643/bauhaus-universitaet.4303}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201214-43038}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {394}, abstract = {Die Verbreitung mobiler Smartphones und besonders deren allgegenw{\"a}rtige Lokalisierungstechnologien ver{\"a}ndern das Navigationsverhalten im Raum nachhaltig. Parallel zur schnell voranschreitenden Entwicklung allt{\"a}glicher Ger{\"a}te, die mitgef{\"u}hrt werden, setzt der {\"U}bergang der bereits l{\"a}nger dauernden Entwicklung von Virtual-Reality-Technik in eine erweiterte und augmentierte Mixed Reality ein. In diesem Spannungsfeld untersucht die vorliegende Arbeit, inwieweit richtungsgebundene und binaural wiedergegebene Stereofonie die menschliche Bewegung im Raum beeinflussen kann und versucht zu er{\"o}rtern, welche Potenziale in der Wiederentdeckung einer relativ lange bekannten Technik liegen. Der Autor hat im Rahmen dieser Arbeit eine binaurale mobile Applikation f{\"u}r richtungsgebundene Stereofonie entwickelt, mit der virtuelle bewegte oder statische Audio-Hotspots im Raum platziert werden k{\"o}nnen. So kann links, rechts oder 30 Meter vor einer Person ein virtueller oder tats{\"a}chlicher Klang im Raum verortet sein. Durch die in Echtzeit berechnete binaurale Wiedergabe der Klangquellen mit einem Stereo-Kopfh{\"o}rer k{\"o}nnen diese r{\"a}umlich verorteten Kl{\"a}nge mit zwei Ohren dreidimensional wahrgenommen werden, {\"a}hnlich dem r{\"a}umlichen Sehen mit zwei Augen. Durch den Einsatz mehrerer lokalisierter Klangquellen als Soundscape entsteht eine augmentierte auditive Realit{\"a}t, die die physische Realit{\"a}t erweitert. Die Position und Navigation des Nutzers wird durch binaurale Lautst{\"a}rkenmodulation (die Lautst{\"a}rke nimmt bei abnehmender Distanz zur Quelle zu) und Stereopanning mit Laufzeitmodulation (die Richtung wird {\"u}ber ein Stereosignal auf beiden Ohren r{\"a}umlich links-rechts-vorne verortet) interaktiv und kybernetisch beeinflusst. Die Nutzer navigieren — durch ihr Interesse an den h{\"o}rbaren virtuellen Klangquellen geleitet — durch einen dynamisch erzeugten, dreidimensionalen akustischen Raum, der gleichzeitig ein virtueller und kybernetischer Raum ist, da die Repr{\"a}sentation der Kl{\"a}nge an die Bewegung und Ausrichtung der Nutzer im Raum angepasst wird. Diese Arbeit untersucht, ob die Bewegung von Menschen durch (virtuelle) Kl{\"a}nge beeinflusst werden kann und wie groß oder messbar dieser Einfluss ist. Dabei k{\"o}nnen nicht alle k{\"u}nstlerischen, architektonischen und philosophischen Fragen im Rahmen der vorliegenden Schrift er{\"o}rtert werden, obwohl sie dennoch als raumtheoretische Fragestellung von Interesse sind. Hauptgegenstand der vorliegenden Arbeit liegt in der Erforschung, ob richtungsgebundene Stereofonie einen relevanten Beitrag zur menschlichen Navigation, haupts{\"a}chlich zu Fuß, in urbanen Gebieten — vorwiegend im Außenraum — leisten kann. Der erste Teil gliedert sich in »Raum und Klang«, es werden raumtheoretische {\"U}berlegungen zur menschlichen Bewegung im Raum, Raumvorstellungen, r{\"a}umliche Kl{\"a}nge und Klangwahrnehmung sowie die Entwicklung stereofoner Apparaturen und Aspekte der Augmented Audio Reality besprochen. Im zweiten Teil werden drei Demonstratoren als Anwendungsszenarien und drei Evaluierungen im Außenraum vorgestellt. Die Tests untersuchen, ob sich das Verfahren zur Navigation f{\"u}r Fußg{\"a}nger eignet und inwieweit eine Einflussnahme auf das Bewegungsverhalten von Nutzern getroffen werden kann. Die Auswertungen der Tests zeigen, dass sich stereofone Kl{\"a}nge grunds{\"a}tzlich als Navigationssystem eignen, da eine große Mehrzahl der Teilnehmer die akustisch markierten Ziele leicht gefunden hat. Ebenso zeigt sich ein klarer Einfluss auf die Bewegungsmuster, allerdings ist dieser abh{\"a}ngig von individuellen Interessen und Vorlieben. Abschließend werden die Ergebnisse der Untersuchungen im Kontext der vorgestellten Theorien diskutiert und die Potenziale stereofoner Anwendungen in einem Ausblick behandelt. Bei der Gestaltung, Erzeugung und Anwendung mobiler Systeme sind unterschiedliche mentale und r{\"a}umliche Modelle und Vorstellungen der Entwickler und Anwender zu beachten. Da eine umfassende transdisziplin{\"a}re Betrachtung klare Begrifflichkeiten erfordert, werden Argumente f{\"u}r ein raumtheoretisches Vokabular diskutiert. Diese sind f{\"u}r einen gestalterischen Einsatz von richtungsgebundener Stereofonie — besonders im Kontext mobiler Navigation durch akustisch augmentierte R{\"a}ume — {\"a}ußerst relevant.}, subject = {Raum}, language = {de} } @phdthesis{Mueller, author = {M{\"u}ller, Jan Philip}, title = {Audiovision und Synchronisation. Sehen, H{\"o}ren und Gleichzeitigkeit in Anordnungen vom Observatorium {\"u}ber psychologische Experimente bis zum Tonfilm im 19. und 20. Jahrhundert}, doi = {10.25643/bauhaus-universitaet.4290}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201123-42906}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {516}, abstract = {In dieser Untersuchung wird eine Geschichte von Problemen der Gleichzeitigkeit zwischen Sehen und H{\"o}ren, beziehungsweise der Synchronit{\"a}t von Bild und Ton, bis zur Entstehung des Tonfilms rekonstruiert. Dabei werden Linien gezogen zwischen diskursiven Konfigurationen und medialen Anordnungen, in denen das Verh{\"a}ltnis von Sehen und H{\"o}ren oder Bild und Ton als zeitliches erscheint - in denen Sehen und H{\"o}ren, Bild und Ton zwischen Mannigfaltigkeit und Einheit verschmelzen, auseinanderfallen, interagieren, redundant oder spezifisch werden, einander erg{\"a}nzen, dominieren, verfehlen verdr{\"a}ngen, aufspalten… Tonfilm ist in der Kinogeschichte eben nicht nur eine Erg{\"a}nzung. Vielmehr {\"a}hnelt er dem Auftritt eines Gespensts, das das Wissen und die Techniken der Trennung der Sinne schon l{\"a}nger, vielleicht schon immer begleitet hatte. Das Auftreten des Tonfilms ist auch {\"u}berhaupt fr{\"u}her Anlass eines weitreichenden Diskurses dar{\"u}ber, was Audiovision eigentlich sein k{\"o}nnte und sollte. Noch allgemeiner k{\"o}nnte auch davon gesprochen werden, dass Tonfilm eins der ersten großen Projekte der Konvergenz technischer Medien ist, die heute - besonders angesichts des Computers - als entscheidender Aspekt von Mediengeschichte erscheint. Die Linien der Probleme von Gleichzeitigkeit/Ungleichzeitigkeit an den Schnittstellen von Wissen, Technik und {\"A}sthetik werden insbesondere durch drei Felder hindurch nachgezeichnet: 1) Die Geschichte von Intermodalit{\"a}t in Bezug auf die Frage nach Gleichzeitigkeit und Ungleichzeitigkeit als Problem und Gegenstand von Wissenschaft seit dem 19. Jahrhundert, vornehmlich in zwei Gebieten: Als Fehlerquelle im astronomischen Observatorium bei der Messung, Feststellung und Vereinheitlichung von Raum und Zeit, die auf individuelle Abweichungen Intermodaler Wahrnehmung verweist und als Problem der „pers{\"o}nlichen Gleichung" weit {\"u}ber die Astronomie hinaus Karriere macht. Als heiße Zone wahrnehmungspsychologischer Experimente und ihrer Apparate seit der Mitte des 19. Jahrhunderts, die mit dem Konzept der „Komplikation" Fragen nach einer Synthese der Sinneswahrnehmungen und damit letztlich nach der Selbstgegenwart des Menschen stellt. 2) Eine Technikgeschichte des Problems auditive und visuelle Zeitmedien - wie Phonograph und Film - zu koppeln, zu synchronisieren. Darin eskalieren zwei zeitkritische Relationen: Einerseits zwischen diskreter, intermittierender Bewegung des Films und stetiger, kontinuierlicher Bewegung des Phonographen, andererseits in Bezug darauf, an welcher Stelle - wo und wann - audiovisuelle Gegenwart des Kinos ensteht; oder auch verfehlt wird. 3) Eine Geschichte von Filmtheorie und -{\"a}sthetik, in der sich mit der Durchsetzung des Tonfilms um 1930 die Frage stellt, was dieses neue Medium sei und was damit zu tun. Diese Verhandlungen spannen sich zwischen dem formulierten Ziel einer spezifischen Illusion oder Pr{\"a}senz von Tonfilm durch Synchronit{\"a}t auf der einen Seite und der sich aus dem Verdacht des Betrugs durch Synchronit{\"a}t ergebenden Forderung nach „Asynchronismus" als kritischer Methode auf der anderen Seite auf. Ausgehend von der These, dass im 19. Jahrhundert die Sinne aufgeteilt werden, dann wird in diesen Anordnungen an irgendeiner Stelle Heterogenes gleichzeitig passieren. An welcher Stelle? Und was bedeuten diese (Un-)Gleichzeitigkeiten? Was dabei - sehr allgemein gesprochen - auf dem Spiel steht, sind M{\"o}glichkeiten einer audiovisuell geteilten - getrennten oder gemeinsamen - Welt und Gegenwart.}, subject = {Tonfilm}, language = {de} } @phdthesis{Winkel, author = {Winkel, Benjamin}, title = {A three-dimensional model of skeletal muscle for physiological, pathological and experimental mechanical simulations}, doi = {10.25643/bauhaus-universitaet.4300}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201211-43002}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In recent decades, a multitude of concepts and models were developed to understand, assess and predict muscular mechanics in the context of physiological and pathological events. Most of these models are highly specialized and designed to selectively address fields in, e.g., medicine, sports science, forensics, product design or CGI; their data are often not transferable to other ranges of application. A single universal model, which covers the details of biochemical and neural processes, as well as the development of internal and external force and motion patterns and appearance could not be practical with regard to the diversity of the questions to be investigated and the task to find answers efficiently. With reasonable limitations though, a generalized approach is feasible. The objective of the work at hand was to develop a model for muscle simulation which covers the phenomenological aspects, and thus is universally applicable in domains where up until now specialized models were utilized. This includes investigations on active and passive motion, structural interaction of muscles within the body and with external elements, for example in crash scenarios, but also research topics like the verification of in vivo experiments and parameter identification. For this purpose, elements for the simulation of incompressible deformations were studied, adapted and implemented into the finite element code SLang. Various anisotropic, visco-elastic muscle models were developed or enhanced. The applicability was demonstrated on the base of several examples, and a general base for the implementation of further material models was developed and elaborated.}, subject = {Biomechanik}, language = {en} } @article{IşıkBueyueksaracLeventEkincietal., author = {I{\c{s}}{\i}k, Ercan and B{\"u}y{\"u}ksara{\c{c}}, Ayd{\i}n and Levent Ekinci, Yunus and Ayd{\i}n, Mehmet Cihan and Harirchian, Ehsan}, title = {The Effect of Site-Specific Design Spectrum on Earthquake-Building Parameters: A Case Study from the Marmara Region (NW Turkey)}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7247}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207247}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42758}, pages = {23}, abstract = {The Marmara Region (NW Turkey) has experienced significant earthquakes (M > 7.0) to date. A destructive earthquake is also expected in the region. To determine the effect of the specific design spectrum, eleven provinces located in the region were chosen according to the Turkey Earthquake Building Code updated in 2019. Additionally, the differences between the previous and updated regulations of the country were investigated. Peak Ground Acceleration (PGA) and Peak Ground Velocity (PGV) were obtained for each province by using earthquake ground motion levels with 2\%, 10\%, 50\%, and 68\% probability of exceedance in 50-year periods. The PGA values in the region range from 0.16 to 0.7 g for earthquakes with a return period of 475 years. For each province, a sample of a reinforced-concrete building having two different numbers of stories with the same ground and structural characteristics was chosen. Static adaptive pushover analyses were performed for the sample reinforced-concrete building using each province's design spectrum. The variations in the earthquake and structural parameters were investigated according to different geographical locations. It was determined that the site-specific design spectrum significantly influences target displacements for performance-based assessments of buildings due to seismicity characteristics of the studied geographic location.}, subject = {Erdbeben}, language = {en} } @misc{Ansari, type = {Master Thesis}, author = {Ansari, Meisam}, title = {Simulation methods for functional and microstructured composite materials}, doi = {10.25643/bauhaus-universitaet.4278}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201103-42783}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {110}, abstract = {In this thesis, a generic model for the post-failure behavior of concrete in tension is proposed. A mesoscale model of concrete representing the heterogeneous nature of concrete is formulated. The mesoscale model is composed of three phases: aggregate, mortar matrix, and the Interfacial Transition Zone between them. Both local and non-local formulations of the damage are implemented and the results are compared. Three homogenization schemes from the literature are employed to obtain the homogenized constitutive relationship for the macroscale model. Three groups of numerical examples are provided.}, subject = {Simulation}, language = {en} } @incollection{Linseisen, author = {Linseisen, Elisa}, title = {Medien/Denken/Um/Formatieren}, series = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4257}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42574}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {51 -- 69}, abstract = {Die medienwissenschaftliche Praxis des Um / Formatierens wurde im Wintersemester 2017 / 18 mit vierzig Bache- lor-Studierenden der Medien-, Theaterwissenschaft und den Gender Studies entwickelt und erprobt. Inhalt des Seminars waren konkrete mediale Standardformate, wie z. B. die Carte de Visite, die Schallplatte, der 16- oder 35mm Filmstreifen, digitale Dateiformate, wie das JPEG, GIF, MP3, die Videokassette oder auch Papierformate wie DIN A0 oder A8.}, subject = {Format}, language = {de} } @incollection{BerndtBogojević, author = {Berndt, Arpana Aischa and Bogojević, Maja}, title = {How to be an ally? Gespr{\"a}ch {\"u}ber ein Format f{\"u}r rasssimuskritische Lehre und aktiven Support}, series = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4267}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42679}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {291 -- 311}, abstract = {Gespr{\"a}ch {\"u}ber die intersektionalen Workshops von Arpana Berndt und Maja Bogojević, antirassistische Arbeit an der Hochschule und Allyship.}, subject = {Antirassismus}, language = {de} } @incollection{KynastBaute, author = {Kynast, Katja and Baute, Michael}, title = {Lekt{\"u}rem{\"o}glichkeiten schaffen, Autor*innenschaft generieren. Ein Gespr{\"a}ch zwischen Michael Baute und Katja Kynast zum studentischen Videoessay}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4268}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42688}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {313 -- 332}, abstract = {Ein Gespr{\"a}ch zwischen Michael Baute und Katja Kynast zum studentischen Videoessay}, subject = {Film}, language = {de} } @incollection{EckertLinke, author = {Eckert, Lena and Linke, Maja}, title = {Pr{\"a}ludium zur {\"O}ffnung von Denkr{\"a}umen - Kritische Lehre / K{\"u}nstlerisches Forschen}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4269}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42699}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {335 -- 351}, abstract = {Schreibwalzer GeradekanonischeTexteumgibteine Aura der Unantastbarkeit und es scheint, als br{\"a}uchte man eine gewisse Art der Legitimation, sich diesen auch kritisch anzun{\"a}hern oder mit eigenen Gedanken auf eine Stufe zu stellen. Im Pr{\"a}ludium tasten wir uns phy- sisch mit Schere, Bleistift, Klebestift an diese Schwer- gewichte heran und dar{\"u}ber hinaus; mit Respekt, doch ohne Einsch{\"u}chterung.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @incollection{EmersonEgert, author = {Emerson, Jill and Egert, Gerko}, title = {wie den sozialen Muskel trainieren}, series = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4258}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42586}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {71 -- 89}, abstract = {Interview zum Social Muskel Club und dem "Geben und nehmen Spiel"}, subject = {Gabe}, language = {de} }