@phdthesis{Ma2006,
  author    = {Ma, Hang},
  title     = {"Villages" in Shenzhen- Persistence and Transformation of an Old Social System in an Emerging Megacity},
  doi       = {10.25643/bauhaus-universitaet.771},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060806-8094},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {In the history of 'villages' in Shenzhen, rich traditional cultural resources that are directly related to the folk life in urban corporate community still exist today, synchronously agricultural economy of urban corporate community is transformed into joint-stock economy, and natural villages are transformed into 'heterogeneous' space of city. The most significant fact in the modern social transition is that modern societies have surpassed traditional societies, and cities have surpassed the country. Weber, Durkheim, T{\"o}nnies, Simmel and others devoted themselves to cultivating the essence of social transition. The most influential theory to observe and analyze it is the two-tiered approach of ideal type. T{\"o}nnies made distinction between 'Gemeinschaft and Gesellschaft', Durkheim distinguished 'mechanical solidarity and organic solidarity', and Redfield analyzed 'folk society and urban society'. In those classical theories, the former transit to the later is considered to be a general rule of transition from traditional society to modern society, and from traditional community to modern community. However, ever since Redfield used the dependent relationship and interactive framework of 'great tradition' and 'little tradition' to explain various complicated phenomena in the transition from tradition to modern in 1950s, he suggested that a folk-urban continuum can be formed in the transition from folk society to urban society. 'Both terms, 'city' and 'country', are not and have never been limited or restricted to their obvious denotations: 'city' is not and has never been only urban. As a category it always encompasses (includes, embodies, embraces) itself and its opposite, the country' (Hassenpflug 2002, 46). Generally, social groups and culture characterized by weak 'potential' will take their own 'little tradition' as 'bridge' and agency, in order to enter or melt themselves into a 'great tradition' that embodies great 'potential' to seek for space to live and develop. There are many different types of transitions that villagers enter and get melt into 'great tradition' through their individual 'little tradition'. There are exploration and development of traditional resources in 'segmentation', such as the frequent relation between a great flow of peasants to cities and the network of kinship, and of earthbound relations; alternatively, there are assistances and utilization of resources of a whole corporate network, such as the traditional corporate community's organization of local resources during the process of non-agriculturization of villages; and 'villages' in Shenzhen is of the latter situation. The following conclusion can be made based on the above analyses: urban corporate community formed in the process of non-agricultural development and urbanization is an organizing dependency on which villagers melt into city and adapt to urban life. The unique inner-structure and function determine that comparing with other organizations, it has a better performance, efficiency and more humanity care. Firstly, corporate community which is re-organized in the non-agricultural process currently is the only and the most effective organizational resources that can be utilized and has significant meanings in protecting villagers' interest and benefit; secondly, in the short term, other approaches do not have the advantage and the effect as urban corporate community has on the focusing degree of public affairs in the comprehensive urbanization process; thirdly, the 'new' key connotation of urban corporate community, including its community management functions, is the main reason for which such community has the rationality of being; fourthly, urban corporate community will inevitably face many problems in the urbanization due to its inner fixed characteristics (lack of external support), but to a certain degree it has the ability to self-repair and problem solving under the precondition that, the government and society have a fair, impersonal view of 'villages', and base on this view providing multi-supports, especially providing rational system arrangement and policy supports. Consequently, in order to preserve and protect social system and cultural heritage within the 'villages', and gradually make the coordinative development of 'great tradition' represented by cities and of 'little tradition' represented by 'villages', 'soft reconstruction' rather than 'hard reconstruction' should be adopted by the government, during the recent reconstruction of 'villages' in Shenzhen.},
  subject      = {China},
  language  = {en}
}
@techreport{GrossOemig2006,
  author    = {Gross, Tom and Oemig, Christoph},
  title     = {'Sorry, Pal---What I See is Usually Not What You Get!': The Role of Reciprocity in Information Disclosure},
  doi       = {10.25643/bauhaus-universitaet.747},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7474},
  year      = {2006},
  abstract  = {For efficient distant cooperation the members of workgroups need information about each other. This need for information disclosure often conflicts with the users' wishes for privacy. In the literature often reciprocity is suggested as a solution to this trade-off. Yet, this conception of reciprocity and its enforcement by systems does not match reality. In this paper we present our study's major findings investigating the role of reciprocity among which we found that participants greatly disregarded the above conception. Additionally we discuss their significant implications for the design of systems seeking to disclose personal information.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{StahrRuthWolkowicz,
  author    = {Stahr, Alexander and Ruth, J{\"u}rgen and Wolkowicz, Christian},
  title     = {... WITHOUT RIGHT ANGLE.},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3024},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30248},
  pages     = {8},
  abstract  = {Currently sculptural design is one of the most discussed themes in architecture. Due to their light weight, easy transportation and assembly, as well as an almost unlimited structural variety, parameterised spatial structures are excellently suited for constructive realisation of free formed claddings. They subdivide the continuous surface into a structure of small sized nodes, straight members and plane glass panels. Thus they provide an opportunity to realise arbitrary double-curved claddings with a high degree of transparency, using industrial semi-finished products (steel sections, flat glass). Digital design strategies and a huge number of similar looking but in detail unique structural members demand a continuous digital project handling. Within a research project, named MYLOMESH, a free-formed spatial structure was designed, constructed, fabricated and assembled. All required steps were carried out based on digital data. Different digital connections (scripts) between varying software tools, which are usually not used in the planning process of buildings, were created. They allow a completely digital workflow. The project, its design, meshing, constructive detailing and the above-mentioned scripts are described in this paper.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{CruzFalcaoMalonek,
  author    = {Cruz, J. F. and Falc{\~a}o, M. Irene and Malonek, Helmuth Robert},
  title     = {3D-MAPPINGS AND THEIR APPROXIMATION BY SERIES OF POWERS OF A SMALL PARAMETER},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2940},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29406},
  pages     = {14},
  abstract  = {In classical complex function theory the geometric mapping property of conformality is closely linked with complex differentiability. In contrast to the planar case, in higher dimensions the set of conformal mappings is only the set of M{\"o}bius transformations. Unfortunately, the theory of generalized holomorphic functions (by historical reasons they are called monogenic functions) developed on the basis of Clifford algebras does not cover the set of M{\"o}bius transformations in higher dimensions, since M{\"o}bius transformations are not monogenic. But on the other side, monogenic functions are hypercomplex differentiable functions and the question arises if from this point of view they can still play a special role for other types of 3D-mappings, for instance, for quasi-conformal ones. On the occasion of the 16th IKM 3D-mapping methods based on the application of Bergman's reproducing kernel approach (BKM) have been discussed. Almost all authors working before that with BKM in the Clifford setting were only concerned with the general algebraic and functional analytic background which allows the explicit determination of the kernel in special situations. The main goal of the abovementioned contribution was the numerical experiment by using a Maple software specially developed for that purpose. Since BKM is only one of a great variety of concrete numerical methods developed for mapping problems, our goal is to present a complete different from BKM approach to 3D-mappings. In fact, it is an extension of ideas of L. V. Kantorovich to the 3-dimensional case by using reduced quaternions and some suitable series of powers of a small parameter. Whereas until now in the Clifford case of BKM the recovering of the mapping function itself and its relation to the monogenic kernel function is still an open problem, this approach avoids such difficulties and leads to an approximation by monogenic polynomials depending on that small parameter.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BockGuerlebeck,
  author    = {Bock, Sebastian and G{\"u}rlebeck, Klaus},
  title     = {A Coupled Ritz-Galerkin Approach Using Holomorphic and Anti-holomorphic Functions},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2928},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29281},
  pages     = {14},
  abstract  = {The contribution focuses on the development of a basic computational scheme that provides a suitable calculation environment for the coupling of analytical near-field solutions with numerical standard procedures in the far-field of the singularity. The proposed calculation scheme uses classical methods of complex function theory, which can be generalized to 3-dimensional problems by using the framework of hypercomplex analysis. The adapted approach is mainly based on the factorization of the Laplace operator EMBED Equation.3 by the Cauchy-Riemann operator EMBED Equation.3 , where exact solutions of the respective differential equation are constructed by using an orthonormal basis of holomorphic and anti-holomorphic functions.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Nour2006,
  author    = {Nour, Mohamed},
  title     = {A Flexible Model for Incorporating Construction Product Data into Building Information Models},
  doi       = {10.25643/bauhaus-universitaet.740},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060317-7781},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work.},
  subject      = {Produktinformation},
  language  = {en}
}
@inproceedings{BaitschHartmann,
  author    = {Baitsch, Matthias and Hartmann, Dietrich},
  title     = {A FRAMEWORK FOR THE INTERACTIVE VISUALIZATION OF ENGINEERING MODELS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2919},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29194},
  pages     = {9},
  abstract  = {Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new - engineering model specific - filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@unpublished{WetzsteinBimber2006,
  author    = {Wetzstein, Gordon and Bimber, Oliver},
  title     = {A Generalized Approach to Radiometric},
  doi       = {10.25643/bauhaus-universitaet.762},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7625},
  year      = {2006},
  abstract  = {We propose a novel method that applies the light transport matrix for performing an image-based radiometric compensation which accounts for all possible types of light modulation. For practical application the matrix is decomposed into clusters of mutually influencing projector and camera pixels. The compensation is modeled as a linear system that can be solved with respect to the projector patterns. Precomputing the inverse light transport in combination with an efficient implementation on the GPU makes interactive compensation rates possible. Our generalized method unifies existing approaches that address individual problems. Based on examples, we show that it is possible to project corrected images onto complex surfaces such as an inter-reflecting statuette, glossy wallpaper, or through highly-refractive glass. Furthermore, we illustrate that a side-effect of our approach is an increase in the overall sharpness of defocused projections.},
  subject      = {Association for Computing Machinery / Special Interest Group on Graphics},
  language  = {en}
}
@inproceedings{BrackxDeKnockDeSchepper,
  author    = {Brackx, Fred and De Knock, B. and De Schepper, Hennie},
  title     = {A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2929},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29297},
  pages     = {15},
  abstract  = {In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MostBucherMacke,
  author    = {Most, Thomas and Bucher, Christian and Macke, M.},
  title     = {A NATURAL NEIGHBOR BASED MOVING LEAST SQUARES APPROACH WITH INTERPOLATING WEIGHTING FUNCTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2994},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29943},
  pages     = {17},
  abstract  = {The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares approximation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this method the obtained shape functions do not fulfill the interpolation condition, which causes additional numerical effort for the imposition of the essential boundary conditions. The application of a singular weighting function, which leads to singular coefficient matrices at the nodes, can solve this problem, but requires a very careful placement of the integration points. Special procedures for the handling of such singular matrices were proposed in literature, which require additional numerical effort. In this paper a non-singular weighting function is presented, which leads to an exact fulfillment of the interpolation condition. This weighting function leads to regular values of the weights and the coefficient matrices in the whole interpolation domain even at the nodes. Furthermore this function gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than classical weighting function types. Nevertheless, for practical applications the results are similar as these obtained with the regularized weighting type presented by the authors in previous publications. Finally a new concept will be presented, which enables an efficient analysis of systems with strongly varying node density. In this concept the nodal influence domains are adapted depending on the nodal configuration by interpolating the influence radius for each direction from the distances to the natural neighbor nodes. This approach requires a Voronoi diagram of the domain, which is available in this study since Delaunay triangles are used as integration background cells. In the numerical examples it will be shown, that this method leads to a more uniform and reduced number of influencing nodes for systems with varying node density than the classical circular influence domains, which means that the small additional numerical effort for interpolating the influence radius leads to remarkable reduction of the total numerical cost in a linear analysis while obtaining similar results. For nonlinear calculations this advantage would be even more significant.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Pham,
  author    = {Pham, Hoang Anh},
  title     = {ADAPTIVE EXCITATION FOR SELECTIVE SENSITIVITY-BASED STRUCTURAL IDENTIFICATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3001},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30015},
  pages     = {9},
  abstract  = {Major problems of applying selective sensitivity to system identification are requirement of precise knowledge about the system parameters and realization of the required system of forces. This work presents a procedure which is able to deriving selectively sensitive excitation by iterative experiments. The first step is to determine the selectively sensitive displacement and selectively sensitive force patterns. These values are obtained by introducing the prior information of system parameters into an optimization which minimizes the sensitivities of the structure response with respect to the unselected parameters while keeping the sensitivities with respect to the selected parameters as a constant. In a second step the force pattern is used to derive dynamic loads on the tested structure and measurements are carried out. An automatic control ensures the required excitation forces. In a third step, measured outputs are employed to update the prior information. The strategy is to minimize the difference between a predicted displacement response, formulated as function of the unknown parameters and the measured displacements, and the selectively sensitive displacement calculated in the first step. With the updated values of the parameters a re-analysis of selective sensitivity is performed and the experiment is repeated until the displacement response of the model and the actual structure are conformed. As an illustration a simply supported beam made of steel, vibrated by harmonic excitation is investigated, thereby demonstrating that the adaptive excitation can be obtained efficiently.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MostBucher,
  author    = {Most, Thomas and Bucher, Christian},
  title     = {ADAPTIVE RESPONSE SURFACE APPROACH USING ARTIFICIAL NEURAL NETWORKS AND MOVING LEAST SQUARES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2992},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29922},
  pages     = {13},
  abstract  = {In engineering science the modeling and numerical analysis of complex systems and relations plays an important role. In order to realize such an investigation, for example a stochastic analysis, in a reasonable computational time, approximation procedure have been developed. A very famous approach is the response surface method, where the relation between input and output quantities is represented for example by global polynomials or local interpolation schemes as Moving Least Squares (MLS). In recent years artificial neural networks (ANN) have been applied as well for such purposes. Recently an adaptive response surface approach for reliability analyses was proposed, which is very efficient concerning the number of expensive limit state function evaluations. Due to the applied simplex interpolation the procedure is limited to small dimensions. In this paper this approach is extended for larger dimensions using combined ANN and MLS response surfaces for evaluating the adaptation criterion with only one set of joined limit state points. As adaptation criterion a combination by using the maximum difference in the conditional probabilities of failure and the maximum difference in the approximated radii is applied. Compared to response surfaces on directional samples or to plain directional sampling the failure probability can be estimated with a much smaller number of limit state points.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EckardtKoenke,
  author    = {Eckardt, Stefan and K{\"o}nke, Carsten},
  title     = {ADAPTIVE SIMULATION OF THE DAMAGE BEHAVIOR OF CONCRETE USING HETEROGENEOUS MULTISCALE MODELS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2947},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29478},
  pages     = {15},
  abstract  = {In this paper an adaptive heterogeneous multiscale model, which couples two substructures with different length scales into one numerical model is introduced for the simulation of damage in concrete. In the presented approach the initiation, propagation and coalescence of microcracks is simulated using a mesoscale model, which explicitly represents the heterogeneous material structure of concrete. The mesoscale model is restricted to the damaged parts of the structure, whereas the undamaged regions are simulated on the macroscale. As a result an adaptive enlargement of the mesoscale model during the simulation is necessary. In the first part of the paper the generation of the heterogeneous mesoscopic structure of concrete, the finite element discretization of the mesoscale model, the applied isotropic damage model and the cohesive zone model are briefly introduced. Furthermore the mesoscale simulation of a uniaxial tension test of a concrete prism is presented and own obtained numerical results are compared to experimental results. The second part is focused on the adaptive heterogeneous multiscale approach. Indicators for the model adaptation and for the coupling between the different numerical models will be introduced. The transfer from the macroscale to the mesoscale and the adaptive enlargement of the mesoscale substructure will be presented in detail. A nonlinear simulation of a realistic structure using an adaptive heterogeneous multiscale model is presented at the end of the paper to show the applicability of the proposed approach to large-scale structures.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WallFoersterNeumannetal.,
  author    = {Wall, Wolfgang A. and F{\"o}rster, Christiane and Neumann, Malte and Ramm, Ekkehard},
  title     = {ADVANCES IN FLUID-STRUCTURE INTERACTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2916},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29161},
  pages     = {17},
  abstract  = {For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements. Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ZangSommer,
  author    = {Zang, Di and Sommer, G.},
  title     = {ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3039},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30396},
  pages     = {10},
  abstract  = {We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ F{\"U}R FACILITY MANAGEMENT UND ANWENDUNG},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2914},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29140},
  pages     = {9},
  abstract  = {Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsf{\"a}higkeit in kleinsten Formaten, mit geringsten Energien und zu g{\"u}nstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Ger{\"a}ten und Systemen ist nunmehr zur Selbstverst{\"a}ndlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir n{\"a}hern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der {\"u}berall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen t{\"a}glichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die gr{\"o}ßeren Computerkomponenten (z.B. PCs, Server) {\"u}ber Datenschnittstellen zu r{\"a}umlich verteilten Netzwerken verkn{\"u}pft (z.B. Internet, Intranet) und mit einer system{\"u}bergreifenden und ad{\"a}quaten Intelligenz (Software) programmiert, so k{\"o}nnen neuartige Funktionalit{\"a}ten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Geb{\"a}uden und R{\"a}umen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Geb{\"a}udephysik, technischer Geb{\"a}udeausr{\"u}stung (TGA) und Geb{\"a}udeautomation (GA) im Wege stehende Gewerketrennung zu {\"u}berwinden. Es entstehen f{\"u}r div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erl{\"a}uterte Beispiele f{\"u}r AmI-L{\"o}sungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notf{\"a}llen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im B{\"u}ro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Geb{\"a}uden. Im Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste L{\"o}sungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen M{\"o}glichkeiten f{\"u}r den Transfer dieser neuen Technologie in den Raum- und Geb{\"a}udebereich. Es folgt eine abschließende Zusammenfaßung und eine Einsch{\"a}tzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{MostEckardtSchraderetal.,
  author    = {Most, Thomas and Eckardt, Stefan and Schrader, Kai and Deckner, T.},
  title     = {AN IMPROVED COHESIVE CRACK MODEL FOR COMBINED CRACK OPENING AND SLIDING UNDER CYCLIC LOADING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2993},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29933},
  pages     = {20},
  abstract  = {The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Martin2006,
  type      = {Master Thesis},
  author    = {Martin, Karlheinz},
  title     = {Analyse der baubetrieblichen Logik und Grundlagen zur 3-D-Simulation eines U-Bahnhofs},
  doi       = {10.25643/bauhaus-universitaet.785},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7855},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Am beispiel der sich im Bau befindlichen U-Bahnstation 'Vijzelgracht' in Amsterdam werden beispielhaft Ablaufkonzepte untersucht und und durch Analyse ihrer Logik gepr{\"u}ft. Der Schwerpunkt der Untersuchung liegt in der Entwicklung von m{\"o}glichen Konzepten der Kombination von Erdaushub mit der Montage von aussteifenden Elementen. Dazu werden die wesentlichen, relevanten Arbeitsschritte identifiziert und beschrieben. Auf der Basis von Aufwandswerten werden Maschinen und Ger{\"a}te dimensioniert. Die Mengenermittlung des Erdstoffvolumens ist hierbei ebenso Grundlage f{\"u}r die Erarbeitung von Ablaufkonzepten. Auf diesen Grundlagen werden mehrere Ablaufkonzepte dargestellt. Der Nachweis der logischen Wahrheit erfolgt am Beispiel einer Ablaufvariante. Hier werden die in logische Sprache {\"u}berf{\"u}hrten Arbeitsschritte dargestellt und auf Wahrheit hin gepr{\"u}ft.},
  subject      = {Bauablauf},
  language  = {de}
}
@misc{Wolny2006,
  type      = {Master Thesis},
  author    = {Wolny, Petra},
  title     = {Analyse der Trag- und Funktionsf{\"a}higkeit von Lagern und Pfeilern bei unterschiedlichen Sicherheitskonzepten},
  doi       = {10.25643/bauhaus-universitaet.751},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7516},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Bemessung der Lager und Pfeiler einer f{\"u}nffeldrigen zweistegigen vorgespannten Plattenbalkenbr{\"u}cke in Massivbauweise; Analyse der Einwirkungen, der Kr{\"a}fte und Bewegungen in den Lagerungspunkten sowie der Lager und Pfeiler;},
  subject      = {Analyse},
  language  = {de}
}
@inproceedings{WoszczynaKaminskiMajetal.,
  author    = {Woszczyna, Anna and Kaminski, Mieczysław and Maj, Marek and Ubysz, Andrzej},
  title     = {ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3038},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30388},
  pages     = {7},
  abstract  = {Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{RyanKrausshar,
  author    = {Ryan, John and Kraußhar, Rolf S{\"o}ren},
  title     = {ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3008},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30081},
  pages     = {5},
  abstract  = {In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Knyziak,
  author    = {Knyziak, Piotr},
  title     = {ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2979},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29792},
  pages     = {9},
  abstract  = {This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Krasnov,
  author    = {Krasnov, Yakov},
  title     = {ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2982},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29822},
  pages     = {16},
  abstract  = {Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KoenigLang,
  author    = {K{\"o}nig, Markus and Lang, H.},
  title     = {ANWENDUNG DES CASE-BASED REASONING BEI DER ERMITTLUNG VON VARIANTEN F{\"u}R DEN OBERBAU VON VERKEHRSFL{\"A}CHEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2980},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29808},
  pages     = {9},
  abstract  = {F{\"u}r die Ausf{\"u}hrung des Oberbaus von Verkehrsfl{\"a}chen existiert in Abh{\"a}ngigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei {\"a}hnlichen Voraussetzungen h{\"a}ufig gleichartige Ausf{\"u}hrungsvarianten gew{\"a}hlt. Um eine m{\"o}gliche L{\"o}sungsvariante f{\"u}r den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte ber{\"u}cksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universit{\"a}t Weimar wurde die Anwendung des Case-Based Reasoning f{\"u}r die Auswahl von Ausf{\"u}hrungsvarianten f{\"u}r den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von {\"a}hnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{MisyuraVolkova,
  author    = {Misyura, E. and Volkova, Viktorija},
  title     = {APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3031},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30313},
  pages     = {7},
  abstract  = {The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KraussharConstalesGuerlebecketal.,
  author    = {Kraußhar, Rolf S{\"o}ren and Constales, Denis and G{\"u}rlebeck, Klaus and Spr{\"o}ßig, Wolfgang},
  title     = {APPLICATIONS OF QUATERNIONIC ANALYSIS IN ENGINEERING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2912},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29128},
  pages     = {8},
  abstract  = {The quaternionic operator calculus can be applied very elegantly to solve many important boundary value problems arising in fluid dynamics and electrodynamics in an analytic way. In order to set up fully explicit solutions. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one has to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. Recently the theory of quaternionic holomorphic multiperiodic functions and automorphic forms provided new impulses to set up explicit representation formulas for large classes of hyperbolic polyhedron type domains. These include block shaped domains, wedge shaped domains (with or without additional rectangular restrictions) and circular symmetric finite and infinite cylinders as particular subcases. In this talk we want to give an overview over the recent developments in this direction.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Volkova,
  author    = {Volkova, Viktorija},
  title     = {APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3032},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30329},
  pages     = {7},
  abstract  = {The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration - displacement". Unlike the trajectories mapping in a plane "velocity - displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{GruberValdman,
  author    = {Gruber, Peter and Valdman, J.},
  title     = {APPROXIMATE SOLUTION OF ELASTOPLASTIC PROBLEMS BASED ON THE MOREAU-YOSIDA THEOREM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2960},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29602},
  pages     = {8},
  abstract  = {We propose a new approach to the numerical solution of quasi-static elastic-plastic problems based on the Moreau-Yosida theorem. After the time discretization, the problem is expressed as an energy minimization problem for unknown displacement and plastic strain fields. The dependency of the minimization functional on the displacement is smooth whereas the dependency on the plastic strain is non-smooth. Besides, there exists an explicit formula, how to calculate the plastic strain from a given displacement field. This allows us to reformulate the original problem as a minimization problem in the displacement only. Using the Moreau-Yosida theorem from the convex analysis, the minimization functional in the displacements turns out to be Frechet-differentiable, although the hidden dependency on the plastic strain is non-differentiable. The seconds derivative exists everywhere apart from the elastic-plastic interface dividing elastic and plastic zones of the continuum. This motivates to implement a Newton-like method, which converges super-linearly as can be observed in our numerical experiments.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Noennig2006,
  author    = {N{\"o}nnig, J{\"o}rg Rainer},
  title     = {ARCHITEKTUR, SPRACHE, KOMPLEXIT{\"A}T : Acht Essays zur Architekturepistemologie},
  doi       = {10.25643/bauhaus-universitaet.931},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20071023-9946},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Komplexit{\"a}t ist ein genuin architektonisches Problem. Der Begriff von Architektur als einer universellen Praxis bzw. ganzheitlichen Erkenntnisweise enth{\"a}lt bereits im Kern den Begriff 'Komplexit{\"a}t'. Beide Konzepte fallen weithin zusammen - Architektur kann damit als spezifische Denkform des Komplexen betrachtet werden. Das in der Arbeit aufgezeigte Dilemma besteht darin, dass der modernen Architektur ihr urspr{\"u}nglicher Gestaltungsgegenstand - Komplexit{\"a}t - abhanden gekommen ist: 'N{\"o}nnig dekonstruiert zu Recht die hoch aggregierten Begriffe des Raumes und des Entwurfs. Die gesamte Arbeit zeigt, dass die modernen Beschreibungsformen von Komplexit{\"a}t gerade nicht in der Architektur entwickelt sind.' (Prof. Gerd Zimmermann, Weimar). Um dieses Defizit zu beheben und Architektur als eigenst{\"a}ndige Wissenstechnik ('Technoepisteme') zu etablieren, wird ausgehend von spezifischen 'Praxis- und Diskursdefiziten' ein Theorieszenario entwickelt, mit dem und in dem Architektur sich als komplexe Wissensform verwirklicht (u.a. Komplexe Systeme, Design Sciences, Operationale Heuristik). 'Vorliegende Arbeit ist der Versuch […] die Architektur gewissermaßen wieder in den Stand zu setzen, der ihr im System des Denkens eigentlich zukommt […] Der Komplexit{\"a}tsdiskurs in der Architektur ist zur{\"u}ck.' (Prof. Gerd Zimmermann, Weimar)},
  subject      = {Erkenntnistheorie},
  language  = {de}
}
@inproceedings{Wittenberg,
  author    = {Wittenberg, Reinhold},
  title     = {AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3035},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30356},
  pages     = {7},
  abstract  = {Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gr{\"u}nde hierf{\"u}r sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings fr{\"u}hzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation st{\"a}ndig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete m{\"o}glich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende erm{\"o}glicht, dass gravierende Ver{\"a}nderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management fr{\"u}hzeitig (im Sinne eines Fr{\"u}hwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelm{\"a}ßig gepr{\"u}ft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren {\"u}berpr{\"u}ft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht verg{\"u}tet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verf{\"u}gung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{RichterDonath,
  author    = {Richter, Katharina and Donath, Dirk},
  title     = {AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3004},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30047},
  pages     = {5},
  abstract  = {This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LourensvanRooyen,
  author    = {Lourens, Eliz-Mari and van Rooyen, G.C.},
  title     = {Automating Preliminary Column Force Calculations In Multy-Storey Buildings},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2986},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29864},
  pages     = {10},
  abstract  = {In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WenderWillenbacherHuebler,
  author    = {Wender, K. and Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {BENUTZERAD{\"A}QUATE NAVIGATIONS- UND RECHERCHETECHNOLOGIEN F{\"U}R VERTEILTE DYNAMISCHE DIGITALE BAUWERKSMODELLE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3034},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30349},
  pages     = {13},
  abstract  = {Hinsichtlich der Integration einzelner Bauwerkslebensphasen und der verschiedenen Beteiligten, insbesondere innerhalb von Bauplanungs- und Revitalisierungsprozessen, bestehen aktuell entscheidende Defizite. Die generelle Zielstellung der in diesem Beitrag vorgestellten Forschungsarbeiten besteht in der Unterst{\"u}tzung und Verbesserung der Integration durch die disziplin- und lebensphasen{\"u}bergreifende Bereitstellung s{\"a}mtlicher bauwerksbezogener Informationen. Dies erfordert einerseits geeignete Ans{\"a}tze zur Modellierung und Integration der vielf{\"a}ltigen disziplinspezifischen Daten, andererseits geeignete L{\"o}sungen, die einen globalen Zugriff, Navigation und Recherche im Gesamtdatenbestand erm{\"o}glichen. Die Modellierung und Verwaltung bauwerksbezogener Daten ist seit l{\"a}ngerem Gegenstand diverser Forschungsarbeiten. Im Rahmen des SFB 524 wurde ein eigener Ansatz basierend auf einem laufzeitdynamischen Partialmodellverbund entwickelt. Dieser wird in den wesentlichen Grundz{\"u}gen anderen Ans{\"a}tzen gegen{\"u}bergestellt. Den Schwerpunkt dieses Beitrags bildet jedoch die Entwicklung einer geeigneten flexiblen Navigations- und Rechercheschicht zu Realisierung projektglobaler Informationsrecherche. Aus der Sicht der Modellierung und Datenverwaltung wie auch aus der Sicht der Informationsrecherche und Informationspr{\"a}sentation in Planungsprozessen ergeben sich verschiedene Anforderungen an derartige Recherchewerkzeuge, wobei der wesentlichste Grundsatz maximale Flexibilit{\"a}t hinsichtlich verf{\"u}gbarer Darstellungstechniken und deren freie Kombination mit Techniken formaler Suchanfragen ist. Das entwickelte Systemkonzept basiert auf einem Framework, welches verschiedene Grundtypen von Recherchemodulen und deren Interaktionsprinzipien vorgibt. Einzelne Recherchemodule werden als Auspr{\"a}gungen dieser Modultypen realisiert und k{\"o}nnen je nach Bedarf laufzeitdynamisch in die Navigationsschicht integriert werden. Die technische Realisierung des Systems erfolgt im Umfeld vorhandener Prototypen aus vorangegangenen Forschungsaktivit{\"a}ten. Dieses technische Umfeld gibt verschiedene Rahmenbedingungen vor, welche im Vorfeld prototypischer Implementierungen verschiedene Adaptionen des generellen Systemkonzepts notwendig machen. Der vorliegende Beitrag stellt den aktuellen Entwicklungsstand der Systeml{\"o}sung aus konzeptioneller und technischer Sicht sowie erste prototypische Realisierungen von Recherchemodulen vor.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{KoenigTauscher,
  author    = {K{\"o}nig, Markus and Tauscher, Eike},
  title     = {BERECHNUNG VON BAUABL{\"A}UFEN MIT VERSCHIEDENEN AUSF{\"U}HRUNGSVARIANTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2981},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29816},
  pages     = {11},
  abstract  = {Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abh{\"a}ngigkeiten. Basierend auf diesen projektspezifischen Abh{\"a}ngigkeiten wird gew{\"o}hnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabl{\"a}ufe um ein Projekt zu realisieren. Welche dieser Ausf{\"u}hrungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls {\"A};nderungen oder St{\"o}rungen w{\"a}hrend des Bauablaufs auftreten, m{\"u}ssen die davon betroffenen Aufgaben und Abl{\"a}ufe per Hand modifiziert und alternative Aufgaben sowie Abl{\"a}ufe stattdessen ausgef{\"u}hrt werden. Diese Vorgehensweise ist oft sehr aufw{\"a}ndig und teuer. Aktuelle Forschungsans{\"a}tze besch{\"a}ftigen sich mit der automatischen Generierung von Bauabl{\"a}ufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabl{\"a}ufe mit Ausf{\"u}hrungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu k{\"o}nnen. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{CacaoConstalesKrausshar,
  author    = {Cacao, Isabel and Constales, Denis and Kraußhar, Rolf S{\"o}ren},
  title     = {BESSEL FUNCTIONS AND HIGHER DIMENSIONAL DIRAC TYPE EQUATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2936},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29366},
  pages     = {8},
  abstract  = {In this paper we study the structure of the solutions to higher dimensional Dirac type equations generalizing the known λ-hyperholomorphic functions, where λ is a complex parameter. The structure of the solutions to the system of partial differential equations (D- λ) f=0 show a close connection with Bessel functions of first kind with complex argument. The more general system of partial differential equations that is considered in this paper combines Dirac and Euler operators and emphasizes the role of the Bessel functions. However, contrary to the simplest case, one gets now Bessel functions of any arbitrary complex order.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SeidelGasserWerner,
  author    = {Seidel, Tilman and Gasser, Ingenuin and Werner, Bodo},
  title     = {CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3018},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30187},
  pages     = {8},
  abstract  = {Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BrackxDeSchepperSommen,
  author    = {Brackx, Fred and De Schepper, Nele and Sommen, Frank},
  title     = {Clifford-Hermite and Two-Dimensional Clifford-Gabor Filters For Early Vision},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2930},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29303},
  pages     = {22},
  abstract  = {Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@techreport{GrossMarquardt2006,
  author    = {Gross, Tom and Marquardt, Nicolai},
  title     = {CollaborationBus: An Editor for the Easy Configuration of Complex Ubiquitous Environment},
  doi       = {10.25643/bauhaus-universitaet.746},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7463},
  year      = {2006},
  abstract  = {Early sensor-based infrastructures were often developed by experts with a thorough knowledge of base technology for sensing information, for processing the captured data, and for adapting the system's behaviour accordingly. In this paper we argue that also end-users should be able to configure Ubiquitous Computing environments. We introduce the CollaborationBus application: a graphical editor that provides abstractions from base technology and thereby allows multifarious users to configure Ubiquitous Computing environments. By composing pipelines users can easily specify the information flows from selected sensors via optional filters for processing the sensor data to actuators changing the system behaviour according to the users' wishes. Users can compose pipelines for both home and work environments. An integrated sharing mechanism allows them to share their own compositions, and to reuse and build upon others' compositions. Real-time visualisations help them understand how the information flows through their pipelines. In this paper we present the concept, implementation, and early user feedback of the CollaborationBus application.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{DoganArditiGunaydin,
  author    = {Dogan, Sevgi Zeynep and Arditi, D. and Gunaydin, H. Murat},
  title     = {COMPARISON OF ANN AND CBR MODELS FOR EARLY COST PREDICTION OF STRUCTURAL SYSTEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2942},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29421},
  abstract  = {Reasonably accurate cost estimation of the structural system is quite desirable at the early stages of the design process of a construction project. However, the numerous interactions among the many cost-variables make the prediction difficult. Artificial neural networks (ANN) and case-based reasoning (CBR) are reported to overcome this difficulty. This paper presents a comparison of CBR and ANN augmented by genetic algorithms (GA) conducted by using spreadsheet simulations. GA was used to determine the optimum weights for the ANN and CBR models. The cost data of twenty-nine actual cases of residential building projects were used as an example application. Two different sets of cases were randomly selected from the data set for training and testing purposes. Prediction rates of 84\% in the GA/CBR study and 89\% in the GA/ANN study were obtained. The advantages and disadvantages of the two approaches are discussed in the light of the experiments and the findings. It appears that GA/ANN is a more suitable model for this example of cost estimation where the prediction of numerical values is required and only a limited number of cases exist. The integration of GA into CBR and ANN in a spreadsheet format is likely to improve the prediction rates.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SzolomickiBaranski,
  author    = {Szolomicki, Jerzy Pawel and Baranski, Jacek},
  title     = {COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30265},
  pages     = {7},
  abstract  = {In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BauriedelDonathKoenig,
  author    = {Bauriedel, Christian and Donath, Dirk and K{\"o}nig, Reinhard},
  title     = {COMPUTER-SUPPORTED SIMULATIONS FOR URBAN PLANNING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2923},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29235},
  pages     = {10},
  abstract  = {The idea about a simulation program to support urban planning is explained: Four different, clearly defined developing paths can be calculated for the rebuilding of a shrinking town. Aided by self-organization principles, a complex system can be created. The dynamics based on the action patterns of single actors, whose behaviour is cyclically depends on the generated structure. Global influences, which control the development, can be divided at a spatial, socioeconomic, and organizational-juridical level. The simulation model should offer conclusions on new planning strategies, especially in the context of the creation process of rebuilding measures. An example of a transportation system is shown by means of prototypes for the visualisation of the dynamic development process.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BraunesDonath,
  author    = {Braunes, J{\"o}rg and Donath, Dirk},
  title     = {COMPUTERGEST{\"U}TZTE PLANUNG IM BESTAND VON DER DIGITALEN BESTANDSERFASSUNG ZUR PLANUNGSUNTERST{\"U}TZUNG IM CAAD},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2933},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29338},
  pages     = {10},
  abstract  = {F{\"u}r eine gesicherte Planung im Bestand, sind eine F{\"u}lle verschiedenster Informationen zu ber{\"u}cksichtigen, welche oft erst w{\"a}hrend des Planungs- oder Bauprozesses gewonnen werden. Voraussetzung hierf{\"u}r bildet immer eine Bestandserfassung. Zwar existieren Computerprogramme zur Unterst{\"u}tzung der Bestandserfassung, allerdings handelt es sich hierbei ausschließlich um Insell{\"o}sungen. Der Export der aufgenommenen Daten in ein Planungssystem bedingt Informationsverluste. Trotz der potentiellen M{\"o}glichkeit aktueller CAAD/BIM Systeme zur Verwaltung von Bestandsdaten, sind diese vorrangig f{\"u}r die Neubauplanung konzipiert. Die durchg{\"a}ngige Bearbeitung von Sanierungsprojekten von der Erfassung des Bestandes {\"u}ber die Entwurfs- und Genehmigungsplanung bis zur Ausf{\"u}hrungsplanung innerhalb eines CAAD/BIM Systems wird derzeit nicht ad{\"a}quat unterst{\"u}tzt. An der Professur Informatik in der Architektur (InfAR) der Fakult{\"a}t Architektur der Bauhaus-Universit{\"a}t Weimar entstanden im Rahmen des DFG Sonderforschungsbereich 524 "Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken" in den letzten Jahren Konzepte und Prototypen zur fachlich orientierten Unterst{\"u}tzung der Planung im Bestand. Der Fokus lag dabei in der Erfassung aller planungsrelevanter Bestandsdaten und der Abbildung dieser in einem dynamischen Bauwerksmodell. Aufbauend auf diesen Forschungsarbeiten befasst sich der Artikel mit der kontextbezogenen Weiterverwendung und gezielten Bereitstellung von Bestandsdaten im Prozess des Planens im Bestand und der Integration von Konzepten der planungsrelevanten Bestandserfassung in markt{\"u}bliche CAAD/BIM Systeme.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchoenbergerHermann,
  author    = {Sch{\"o}nberger, Karsten and Hermann, F.},
  title     = {COMPUTERGEST{\"U}TZTES PORTFOLIOMANAGEMENT - EIN PRAXISBEISPIEL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3016},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30168},
  pages     = {10},
  abstract  = {Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das gr{\"o}ßte Wohnungsunternehmen in Th{\"u}ringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerst{\"a}nde und unterschiedliche Modernisierungsmaßnahmen und -st{\"a}nde unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivit{\"a}t, die Standortqualit{\"a}t und die Objektwirtschaftlichkeit f{\"a}llt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. {\"U}ber die Schritte der technischen Bestandserfassung, die Einwertung {\"u}ber ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugeh{\"o}riger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-j{\"a}hrigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Schiller,
  author    = {Schiller, Christian},
  title     = {CONSTRAINED TRAFFIC DEMAND MODELS - SIMULTANEOUS DISTRIBUTION AND MODE CHOICE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3014},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30148},
  pages     = {16},
  abstract  = {Unconstrained models are very often found in the broad spectrum of different theories of traffic demand models. In these models there are none or only one-sided restrictions influencing the choice of the individual. However in the traffic demand different deciding dependencies of the traffic volume with regard to the specific conditions of the territory structure potentials exist. Kichhoff and Lohse introduced bi- and tri-linearly constrained models to show these dependencies. In principle, the dependencies are described as hard, elastic and open boundary sum criteria. In this article a model is formulated which gets away from these predefined boundary sum criteria and allows a free determination of minimal and maximal boundary sum criteria. The iterative solution algorithm is shown according to a FURNESS procedure at the same time. With the approach of freely selectable minimal and maximal boundary sum criteria the modeling transport planner gets the possibility to show the traffic event even better. Furthermore all common boundary sum criteria can be calculated with this model. Therewith the often necessary and sensible standard and special cases can also be modeled.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BeranDlask,
  author    = {Beran, V{\´a}clav and Dlask, Petr},
  title     = {CONSTRUCTION SPEED AND CASH FLOW OPTIMISATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2926},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29269},
  pages     = {10},
  abstract  = {Practical examples show that the improvement in cost flow and total amount of money spend in construction and further use may be cut significantly. The calculation is based on spreadsheets calculation, very easy to develop on most PC´s now a days. Construction works, are a field where the evaluation of Cash Flow can be and should be applied. Decisions about cash flow in construction are decisions with long-term impact and long-term memory. Mistakes from the distant past have a massive impact on situations in the present and into the far economic future of economic activities. Two approaches exist. The Just-in-Time (JIT) approach and life cycle costs (LCC) approach. The calculation example shows the dynamic results for the production speed in opposition to stable flow of production in duration of activities. More sophisticated rescheduling in optimal solution might bring in return extra profit. In the technologies and organizational processes for industrial buildings, railways and road reconstruction, public utilities and housing developments there are assembly procedures that are very appropriate for the given purpose, complicated research-, development-, innovation-projects are all very good aspects of these kinds of applications. The investors of large investments and all public invested money may be spent more efficiently if an optimisation speed-strategy can be calculated.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Kasparek,
  author    = {Kasparek, Eva},
  title     = {CONVERGENCE OF A NEW CONSISTENT FOLDED PLATE THEORY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2972},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29724},
  pages     = {10},
  abstract  = {The design of challenging space structures frequently relies on the theory of folded plates. The models are composed of plane facets of which the bending and membrane stiffness are coupled along the folds. In conventional finite element analysis of faceted structures the continuity of the displacement field is enforced exclusively at the nodes. Since approximate solutions for transverse and for in-plane displacements are not members of the same function space, separation occurs in between the common nodes of adjacent elements. It is shown that the kinematic assumptions of Bernoulli are accounted for this incompatibility along the edges in facet models. A general answer to this problem involves substantial modification of plate and membrane theory, but a straight forward formulation can be derived for simply folded plates, structures, whose folds do not intersect. A broad class of faceted structures, including models of various curved shells, belong to this category and can be calculated consistently. The additional requirements to assure continuity concern the mapping of displacement derivatives on the edges. An appropriate finite facet element provides node and edge-oriented degrees of freedom, whose transformation to system degrees of freedom, depends on the geometric configuration at each node. The concept is implemented using conform triangular elements. To evaluate the new approach, the energy norm of representative structures for refined meshes is calculated. The focus is placed on the mathematical convergence towards reliable solutions obtained from finite volume models.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{HaefnerKoenke,
  author    = {H{\"a}fner, Stefan and K{\"o}nke, Carsten},
  title     = {DAMAGE SIMULATION OF HETEROGENEOUS SOLIDS BY NONLOCAL FORMULATIONS ON ORTHOGONAL GRIDS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2963},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29638},
  pages     = {15},
  abstract  = {The present paper is part of a comprehensive approach of grid-based modelling. This approach includes geometrical modelling by pixel or voxel models, advanced multiphase B-spline finite elements of variable order and fast iterative solver methods based on the multigrid method. So far, we have only presented these grid-based methods in connection with linear elastic analysis of heterogeneous materials. Damage simulation demands further considerations. The direct stress solution of standard bilinear finite elements is severly defective, especially along material interfaces. Besides achieving objective constitutive modelling, various nonlocal formulations are applied to improve the stress solution. Such a corrective data processing can either refer to input data in terms of Young's modulus or to the attained finite element stress solution, as well as to a combination of both. A damage-controlled sequentially linear analysis is applied in connection with an isotropic damage law. Essentially by a high resolution of the heterogeneous solid, local isotropic damage on the material subscale allows to simulate complex damage topologies such as cracks. Therefore anisotropic degradation of a material sample can be simulated. Based on an effectively secantial global stiffness the analysis is numerically stable. The iteration step size is controlled for an adequate simulation of the damage path. This requires many steps, but in the iterative solution process each new step starts with the solution of the prior step. Therefore this method is quite effective. The present paper provides an introduction of the proposed concept for a stable simulation of damage in heterogeneous solids.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Bubner2006,
  author    = {Bubner, Andr{\´e}},
  title     = {Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnh{\"a}usern in Stahlbauweise},
  doi       = {10.25643/bauhaus-universitaet.808},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070423-8580},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Modelle bilden die Grundlage der Planung. Sie repr{\"a}sentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenh{\"a}nge bez{\"u}glich der darin abgebildeten Aspekte. Diese Abh{\"a}ngigkeiten werden in der praktischen Planungsbearbeitung gegenw{\"a}rtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen ber{\"u}cksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften f{\"u}hrt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Anspr{\"u}chen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine {\"u}ber den Zweck der Bereitstellung ausgew{\"a}hlter Informationen zum Bauwerk und der Unterst{\"u}tzung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnh{\"a}usern in Stahlbauweise gef{\"u}hrt.},
  subject      = {Modellierung},
  language  = {de}
}
@inproceedings{HelbingKestingTreiberetal.,
  author    = {Helbing, D. and Kesting, A. and Treiber, M. and L{\"a}mmer, S. and Sch{\"o}nhof, M.},
  title     = {DECENTRALIZED APPROACHES TO ADAPTIVE TRAFFIC CONTROL AND AN EXTENDED LEVEL OF SERVICE CONCEPT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2910},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29107},
  pages     = {19},
  abstract  = {Traffic systems are highly complex multi-component systems suffering from instabilities and non-linear dynamics, including chaos. This is caused by the non-linearity of interactions, delays, and fluctuations, which can trigger phenomena such as stop-and-go waves, noise-induced breakdowns, or slower-is-faster effects. The recently upcoming information and communication technologies (ICT) promise new solutions leading from the classical, centralized control to decentralized approaches in the sense of collective (swarm) intelligence and ad hoc networks. An interesting application field is adaptive, self-organized traffic control in urban road networks. We present control principles that allow one to reach a self-organized synchronization of traffic lights. Furthermore, vehicles will become automatic traffic state detection, data management, and communication centers when forming ad hoc networks through inter-vehicle communication (IVC). We discuss the mechanisms and the efficiency of message propagation on freeways by short-range communication. Our main focus is on future adaptive cruise control systems (ACC), which will not only increase the comfort and safety of car passengers, but also enhance the stability of traffic flows and the capacity of the road ("traffic assistance"). We present an automated driving strategy that adapts the operation mode of an ACC system to the autonomously detected, local traffic situation. The impact on the traffic dynamics is investigated by means of a multi-lane microscopic traffic simulation. The simulation scenarios illustrate the efficiency of the proposed driving strategy. Already an ACC equipment level of 10\% improves the traffic flow quality and reduces the travel times for the drivers drastically due to delaying or preventing a breakdown of the traffic flow. For the evaluation of the resulting traffic quality, we have recently developed an extended level of service concept (ELOS). We demonstrate our concept on the basis of travel times as the most important variable for a user-oriented quality of service.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Bargstaedt2006,
  author    = {Bargst{\"a}dt, Hans-Joachim},
  title     = {Der Bauvertrag sagt dazu leider nichts! - Was tun?},
  doi       = {10.25643/bauhaus-universitaet.849},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8498},
  year      = {2006},
  subject      = {Weimar / Bauhaus-Universit{\"a}t / Professur Baubetrieb und Bauverfahren},
  language  = {de}
}
@inproceedings{Wolff2006,
  author    = {Wolff, Ulrich},
  title     = {Die richtige Weiterbildung f{\"u}r den systematischen Kompetenzaufbau},
  doi       = {10.25643/bauhaus-universitaet.848},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8480},
  year      = {2006},
  subject      = {Weimar / Bauhaus-Universit{\"a}t / Professur Baubetrieb und Bauverfahren},
  language  = {de}
}
@article{BimberGrundhoeferZollmannetal.2006,
  author    = {Bimber, Oliver and Grundh{\"o}fer, Anselm and Zollmann, Stefanie and Kolster, Daniel},
  title     = {Digital Illumination for Augmented Studios},
  doi       = {10.25643/bauhaus-universitaet.857},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8576},
  year      = {2006},
  abstract  = {Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computergenerated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination - opening new possibilities for TV studios.},
  subject      = {Studiotechnik},
  language  = {en}
}
@inproceedings{SpiekermannDonath,
  author    = {Spiekermann, Christoph and Donath, Dirk},
  title     = {DIGITAL SUPPORT OF MATERIAL- AND PRODUCT SELECTION IN THE ARCHITECTURAL DESIGN- AND PLANNING PROCESS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3023},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30235},
  pages     = {10},
  abstract  = {Architecture is predominantly perceived over the surfaces limiting the space. The used surface materials thereby should support the design intention and have to fulfil various technical and economical requirements. If the architect wants to select the "right" or the "best" material he has to play with very different and sometimes contradicting criteria and must weight these individually for the special purpose. This selection process is supported only insufficiently by today's digital systems. If it would be possible to illustrate all the various parameters by numerical values, the method of multidimensional scaling will offer a solution for architects to find the material which is best fitting on basis of his individual weighting of criteria. By displaying the result of the architect's multidimensional query in a spatial arrangement multidimensional scaling can support an interactive selection process with additional feedback over the applied search strategy.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{UngerKoenke,
  author    = {Unger, J{\"o}rg F. and K{\"o}nke, Carsten},
  title     = {DISCRETE CRACK SIMULATION OF CONCRETE USING THE EXTENDED FINITE ELEMENTMETHOD},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3030},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30303},
  pages     = {12},
  abstract  = {The extended finite element method (XFEM) offers an elegant tool to model material discontinuities and cracks within a regular mesh, so that the element edges do not necessarily coincide with the discontinuities. This allows the modeling of propagating cracks without the requirement to adapt the mesh incrementally. Using a regular mesh offers the advantage, that simple refinement strategies based on the quadtree data structure can be used to refine the mesh in regions, that require a high mesh density. An additional benefit of the XFEM is, that the transmission of cohesive forces through a crack can be modeled in a straightforward way without introducing additional interface elements. Finally different criteria for the determination of the crack propagation angle are investigated and applied to numerical tests of cracked concrete specimens, which are compared with experimental results.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ZolotovAkimovSidorov,
  author    = {Zolotov, Alexander B. and Akimov, Pavel and Sidorov, Vladimir},
  title     = {DISCRETE-CONTINUAL BOUNDARY ELEMENT METHODS OF ANALYSIS FOR TWO-DIMENSIONAL AND THREE-DIMENSIONAL STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3041},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30419},
  pages     = {22},
  abstract  = {The aim of this paper is to present so-called discrete-continual boundary element method (DCBEM) of structural analysis. Its field of application comprises buildings constructions, structures and also parts and components for the residential, commercial and un-inhabitant structures with invariability of physical and geometrical parameters in some dimensions. We should mention here in particular such objects as beams, thin-walled bars, strip foundations, plates, shells, deep beams, high-rise buildings, extensional buildings, pipelines, rails, dams and others. DCBEM comes under group of semianalytical methods. Semianalytical formulations are contemporary mathematical models which currently becoming available for realization due to substantial speed-up of computer productivity. DCBEM is based on the theory of the pseudodifferential boundary equations. Corresponding pseudodifferential operators are discretely approximated using Fourier analysis or wavelet analysis. The main DCBEM advantages against the other methods of the numerical analysis is a double reduction in dimension of the problem (discrete numerical division applied not to the full region of the interest but only to the boundary of the region cross section, as a matter of fact one is solving an one-dimensional problem with the finite step on the boundary area of the region), one has opportunities to carrying out very detailed analysis of the specific chosen zones, simplified initial data preparation, simplistic and adaptive algorithms. There are two methods to define and conduct DCBEM analysis developed - indirect (IDCBEM) and direct (DDCBEM), thus indirect like in boundary element method (BEM) applied and used little bit more than direct.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{DeaconvanRooyen,
  author    = {Deacon, Michael-John and van Rooyen, G.C.},
  title     = {DISTRIBUTED COLLABORATION: ENGINEERING PRACTICE REQUIREMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2941},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29410},
  pages     = {8},
  abstract  = {Designing a structure follows a pattern of creating a structural design concept, executing a finite element analysis and developing a design model. A project was undertaken to create computer support for executing these tasks within a collaborative environment. This study focuses on developing a software architecture that integrates the various structural design aspects into a seamless functional collaboratory that satisfies engineering practice requirements. The collaboratory is to support both homogeneous collaboration i.e. between users operating on the same model and heterogeneous collaboration i.e. between users operating on different model types. Collaboration can take place synchronously or asynchronously, and the information exchange is done either at the granularity of objects or at the granularity of models. The objective is to determine from practicing engineers which configurations they regard as best and what features are essential for working in a collaborative environment. Based on the suggestions of these engineers a specification of a collaboration configuration that satisfies engineering practice requirements will be developed.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Wehner2006,
  type      = {Master Thesis},
  author    = {Wehner, Diana},
  title     = {Dynamische Analyse der Dreiturmanlage der St. Severikirche in Erfurt},
  doi       = {10.25643/bauhaus-universitaet.741},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7410},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Im Zusammenhang mit der gegenw{\"a}rtigen Zustandsbewertung und geplanten Sanierung der Dreiturmanlage der St. Severikirche in Erfurt wird eine dynamische Analyse unter Glockenl{\"a}uten mit Hilfe eines Finite-Elemente-Modells durchgef{\"u}hrt. Mit diesem unter Verwendung des Programms SLang erstellten FE-Modell wird das Schwingungsverhalten der Dreiturmanlage nachgebildet. Dabei dient als Grundlage die zuvor erfolgte Schwingungsmessung. Mit dem angepassten Modell werden schwingungsreduzierende Maßnahmen hinsichtlich ihrer Wirksamkeit untersucht und bewertet. Weiterhin wird an Ersatzsystemen die aktive Schwingungsisolierung mittels Glockenstuhlunterkonstruktion und der Einbau eines passiven Tilgerd{\"a}mpfers betrachtet.},
  subject      = {Dynamische Analyse},
  language  = {de}
}
@inproceedings{EygelaarvanRooyen,
  author    = {Eygelaar, Anton and van Rooyen, G.C.},
  title     = {ENGINEERING PROCESS MODEL SPECIFICATION AND RESOURCE LEVELING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2952},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29529},
  pages     = {18},
  abstract  = {The use of process models in the analysis, optimization and simulation of processes has proven to be extremely beneficial in the instances where they could be applied appropriately. However, the Architecture/Engineering/Construction (AEC) industries present unique challenges that complicate the modeling of their processes. A simple Engineering process model, based on the specification of Tasks, Datasets, Persons and Tools, and certain relations between them, have been developed, and its advantages over conventional techniques have been illustrated. Graph theory is used as the mathematical foundation mapping Tasks, Datasets, Persons and Tools to vertices and the relations between them to edges forming a directed graph. The acceptance of process modeling in AEC industries not only depends on the results it can provide, but the ease at which these results can be attained. Specifying a complex AEC process model is a dynamic exercise that is characterized by many modifications over the process model's lifespan. This article looks at reducing specification complexity, reducing the probability for erroneous input and allowing consistent model modification. Furthermore, the problem of resource leveling is discussed. Engineering projects are often executed with limited resources and determining the impact of such restrictions on the sequence of Tasks is important. Resource Leveling concerns itself with these restrictions caused by limited resources. This article looks at using Task shifting strategies to find a near-optimal sequence of Tasks that guarantees consistent Dataset evolution while resolving resource restrictions.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Fuss2006,
  type      = {Master Thesis},
  author    = {Fuß, Michael},
  title     = {Erstellung eines geeigneten Web-Content Management-Systems zugeschnitten auf die Anforderungen der Internetpr{\"a}sentation von Lehr- und Forschungseinrichtungen.},
  doi       = {10.25643/bauhaus-universitaet.743},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7436},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Die heute erh{\"a}ltlichen Web-Content Management-Systeme (WCMS) verf{\"u}gen {\"u}ber ein umfangreiches und breit gef{\"a}chertes Angebot an Funktionen, die weit {\"u}ber die, zur Redaktion und zum Management von Internetpr{\"a}sentationen, not-wendigen Grundanforderungen hinausgehen. Das macht diese Systeme in ih-ren Einsatz sehr flexibel und deckt vielf{\"a}ltige Anforderungen der Endanwender ab. Andererseits steigt durch die dadurch bedingte Komplexit{\"a}t der Arbeitsauf-wand erheblich und die Bedien- und Benutzerfreundlichkeit sinkt. Gerade f{\"u}r kleinere Internetpr{\"a}sentationen, die ohne aufwendige Interaktionsm{\"o}glichkeiten aber auf h{\"a}ufig wechselndem Informationsangeboten aufwarten, w{\"a}re dies in seiner Grundfunktionalit{\"a}t reduziertes System vorteilhaft. Ein solches reduziertes Web-Content Management-System soll w{\"a}hrend der Diplomarbeit entworfen und beispielhaft implementiert werden. Als Ausgangs- und Orientierungspunkt soll hierzu die Internetpr{\"a}sentation der Professur Informations- und Wissensverarbeitung dienen. Zur softwaretechnischen Umsetzung sind PHP und MySQL in Verbindung mit regul{\"a}ren HTML und CSS zu be-nutzen. F{\"u}r das weitere Vorgehen m{\"u}ssen zun{\"a}chst die Struktur und der Aufbau der Internetpr{\"a}sentation der Professur analysiert, strukturiert und formalisiert werden. Anschließend sind die am h{\"a}ufigsten professionell genutzten Webcontent-Managementsysteme (TYPO3 und weitere siehe www.opensourcecms.com) hinsichtlich der durch sie angebotenen Grundfunktionalit{\"a}ten und der verwen-deten Templates und Vorlagen zu untersuchen. Die aus dieser Analyse resultierenden Ergebnisse sind Ausgangspunkt f{\"u}r die Anforderungsdefinition des zu erstellenden Mini-WCMS. Anschließend ist eine prototypische Implementierung des theoretisch entstan-denen Systems, zugeschnitten auf die speziellen Bed{\"u}rfnisse der Professur, vorzunehmen und hinsichtlich seiner Eignung zu diskutieren.},
  subject      = {Content Management},
  language  = {de}
}
@inproceedings{Kisil,
  author    = {Kisil, Vladimir},
  title     = {FILLMORE-SPRINGER-CNOPS CONSTRUCTION IMPLEMENTED IN GINAC},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2974},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29744},
  pages     = {103},
  abstract  = {This is an implementation of the Fillmore-Springer-Cnops construction (FSCc) based on the Clifford algebra capacities of the GiNaC computer algebra system. FSCc linearises the linear-fraction action of the Mobius group. This turns to be very useful in several theoretical and applied fields including engineering. The core of this realisation of FSCc is done for an arbitrary dimension, while a subclass for two dimensional cycles add some 2D-specific routines including a visualisation to PostScript files through the MetaPost or Asymptote software. This library is a backbone of many result published in, which serve as illustrations of its usage. It can be ported (with various level of required changes) to other CAS with Clifford algebras capabilities.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Faustino,
  author    = {Faustino, Nelson},
  title     = {FISCHER DECOMPOSITION FOR DIFFERENCE DIRAC OPERATORS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2955},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29551},
  pages     = {10},
  abstract  = {We establish the basis of a discrete function theory starting with a Fischer decomposition for difference Dirac operators. Discrete versions of homogeneous polynomials, Euler and Gamma operators are obtained. As a consequence we obtain a Fischer decomposition for the discrete Laplacian. For the sake of simplicity we consider in the first part only Dirac operators which contain only forward or backward finite differences. Of course, these Dirac operators do not factorize the classic discrete Laplacian. Therefore, we will consider a different definition of a difference Dirac operator in the quaternionic case which do factorizes the discrete Laplacian.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Bilchuk,
  author    = {Bilchuk, Irina},
  title     = {GEOMETRIC IDENTIFICATION OF OBJECTS IN CIVIL ENGINEERING APPLICATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2927},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29274},
  pages     = {21},
  abstract  = {Objects for civil engineering applications can be identified with their reference in memory, their alpha-numeric name or their geometric location. Particularly in graphic user interfaces, it is common to identify objects geometrically by selection with the mouse. As the number of geometric objects in a graphic user interface grows, it becomes increasingly more important to treat the basic operations add, search and remove for geometric objects with great efficiency. Guttmann has proposed the Region-Tree (R-tree) for geometric identification in an environment which uses pages on disc as data structure. Minimal bounding rectangles are used to structure the data in such a way that neighborhood relations can be described effectively. The literature shows that the parameters which influence the efficiency of the R-trees have been studied extensively, but without conclusive results. The goal of the research which is reported in this paper is to determine reliably the parameters which significantly influence the efficiency of R-trees for geometric identification in technical drawings. In order to make this investigation conclusive, it must be performed with the best available software technology. Therefore an object-oriented software for the method is developed. This implementation is tested with technical drawings containing many thousands of geometric objects. These drawings are created automatically by a stochastic generator which is incorporated into a test bed consisting of an editor and a visualisor. This test bed is used to obtain statistics for the main factors which affect the efficiency of R-trees. The investigation shows that the following main factors which affect the efficiency can be identified reliably : number of geometric objects on the drawing the minimum und maximum number of children of a node of the tree the maximum width and height of the minimal bounding rectangles of the geometric objects relative to the size of the drawing.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Haefner2006,
  author    = {H{\"a}fner, Stefan},
  title     = {Grid-based procedures for the mechanical analysis of heterogeneous solids},
  doi       = {10.25643/bauhaus-universitaet.858},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070830-9185},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {The importance of modern simulation methods in the mechanical analysis of heterogeneous solids is presented in detail. Thereby the problem is noted that even for small bodies the required high-resolution analysis reaches the limits of today's computational power, in terms of memory demand as well as acceptable computational effort. A further problem is that frequently the accuracy of geometrical modelling of heterogeneous bodies is inadequate. The present work introduces a systematic combination and adaption of grid-based methods for achieving an essentially higher resolution in the numerical analysis of heterogeneous solids. Grid-based methods are as well primely suited for developing efficient and numerically stable algorithms for flexible geometrical modeling. A key aspect is the uniform data management for a grid, which can be utilized to reduce the effort and complexity of almost all concerned methods. A new finite element program, called Mulgrido, was just developed to realize this concept consistently and to test the proposed methods. Several disadvantages which generally result from grid discretizations are selectively corrected by modified methods. The present work is structured into a geometrical model, a mechanical model and a numerical model. The geometrical model includes digital image-based modeling and in particular several methods for the theory-based generation of inclusion-matrix models. Essential contributions refer to variable shape, size distribution, separation checks and placement procedures of inclusions. The mechanical model prepares the fundamentals of continuum mechanics, homogenization and damage modeling for the following numerical methods. The first topic of the numerical model introduces to a special version of B-spline finite elements. These finite elements are entirely variable in the order k of B-splines. For homogeneous bodies this means that the approximation quality can arbitrarily be scaled. In addition, the multiphase finite element concept in combination with transition zones along material interfaces yields a valuable solution for heterogeneous bodies. As the formulation is element-based, the storage of a global stiffness matrix is superseded such that the memory demand can essentially be reduced. This is possible in combination with iterative solver methods which represent the second topic of the numerical model. Here, the focus lies on multigrid methods where the number of required operations to solve a linear equation system only increases linearly with problem size. Moreover, for badly conditioned problems quite an essential improvement is achieved by preconditioning. The third part of the numerical model discusses certain aspects of damage simulation which are closely related to the proposed grid discretization. The strong efficiency of the linear analysis can be maintained for damage simulation. This is achieved by a damage-controlled sequentially linear iteration scheme. Finally a study on the effective material behavior of heterogeneous bodies is presented. Especially the influence of inclusion shapes is examined. By means of altogether more than one hundred thousand random geometrical arrangements, the effective material behavior is statistically analyzed and assessed.},
  subject      = {B-Spline},
  language  = {en}
}
@inproceedings{BrackxDeSchepperDeSchepperetal.,
  author    = {Brackx, Fred and De Schepper, Hennie and De Schepper, Nele and Sommen, Frank},
  title     = {HERMITIAN CLIFFORD-HERMITE WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2931},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29313},
  pages     = {13},
  abstract  = {The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Jahnke,
  author    = {Jahnke, Georg},
  title     = {HISTORISCHE BAUSUBSTANZ IN MECKLENBURG},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2971},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29719},
  pages     = {11},
  abstract  = {Mit diesen Ausf{\"u}hrungen wird ein Beitrag zum weiteren Erhalt der historischen Bausubstanz in Mecklenburg aus der Sicht der Tragwerksanalyse geleistet. Dabei best{\"a}tigt es sich immer mehr, dass mit dem Modell der Geometrie, der Belastung und des Materials gleichberechtigte Modelle f{\"u}r eine wirklichkeitsnahe Einsch{\"a}tzung des Tragverhaltens eines Tragwerks vorliegen m{\"u}ssen. Es zeigt sich, dass dabei die besten Berechnungsprogramme nur die Ergebnisse liefern k{\"o}nnen, die mit den Eingabedaten zu erzielen sind. So hat sich der Forschungsschwerpunkt im Lehrgebiet Tragwerkslehre des FB Architektur an der Hochschule Wismar in den letzten Jahren auf die realistische Abbildung der Wechselwirkung zwischen der Bauaufnahme und der geometrischen Modellierung konzentriert. In diesem Bereich zeigen sich als Schwerpunkte die Wechselwirkung zwischen Sch{\"a}den und Tragwerksanalyse und die Wechselwirkung zwischen der aufgenommenen Geometrie und dem geometrischen Modell f{\"u}r die Tragwerksanalyse. Die F{\"u}lle der aufgenommenen Daten sind dabei in der Regel mehr hinderlich als ein Segen f{\"u}r die Tragwerksanalyse. Hier wurde gezeigt, welche und wie viele geometrische Daten f{\"u}r das geometrische Modell f{\"u}r die Tragwerksanalyse sinnvoll sind. Da die eigene Datenaufnahme relativ viel Zeit beansprucht, wurde eine "geistige" Bauaufnahme durchgef{\"u}hrt. Dazu wird der historische Planungsprozess in den einzelnen Formfindungsschritten nachvollzogen und in die virtuelle Realit{\"a}t {\"u}berf{\"u}hrt. Mit dieser Methode ergeben sich unterschiedliche Bauzust{\"a}nde und es lassen sich auch m{\"o}gliche Bauphasen abbilden. Die Tragwerksanalyse dieser virtuellen Realit{\"a}t zeigt dann m{\"o}gliche Schw{\"a}chen der Tragwerke und/oder die Notwendigkeit konstruktiver Ver{\"a}nderungen. Ein Vergleich der Ergebnisse der Tragwerksanalyse mit der Realit{\"a}t anhand des vorliegenden Datenbestands liefert die Grundlage f{\"u}r den aktuellen Handlungsbedarf. Da der Bauzustand eines Bauwerkes unter einer zeitlichen Ver{\"a}nderung steht, werden Methoden {\"u}berpr{\"u}ft, die es erm{\"o}glichen, einen einmal vorgelegten Datenbestand aufzubereiten und weiter zu verwalten.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchanzWuttkeDineva,
  author    = {Schanz, Tom and Wuttke, Frank and Dineva, Petia},
  title     = {HYBRID APPROACH OF WAVE NUMBER INTEGRATION-BOUNDARY INTEGRAL EQUATION METHOD FOR SITE EFFECT ESTIMATION OF A LATERALLY VARYING SEISMIC REGION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2913},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29132},
  pages     = {15},
  abstract  = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content Θ and suction Ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable Θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of Θ for any position along the column and (b) give the functional form for the scanning curves.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Goettlicher,
  author    = {G{\"o}ttlicher, Manfred},
  title     = {HYBRID SOLID-LIQUID MODEL FOR GRANULAR MATERIAL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2959},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29596},
  pages     = {20},
  abstract  = {Solid behavior as well as liquid behavior characterizes the flow of granular material in silos. The presented model is based on an appropriate interaction of a displacement field and a velocity field. The constitutive equations and the applied algorithm are developed from the exact solution for a standard case. The standard case evolves from a very tall vertical plane strain silo containing material that flows at a constant speed. No horizontal displacements and velocities take place. No changes regarding the field values arise in the vertical direction and in time. Tension is not allowed at any point. Coulomb friction represents the effects of the vertical walls. The interaction between the flowing material and the walls is covered by a forced boundary condition resulting in an additional matrix for the solid component as well as for the liquid component. The resulting integral equations are designed to be solved directly. Three coefficients describe the properties of the granular material. They govern elastic solid behavior in combination with viscous liquid behavior.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@phdthesis{Roessler2006,
  author    = {R{\"o}ßler, Christiane},
  title     = {Hydratation, Fließf{\"a}higkeit und Festigkeitsentwicklung von Portlandzement - Einfluss von Fließmitteln, Alkalisulfaten und des Abbindereglers},
  doi       = {10.25643/bauhaus-universitaet.799},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070206-8425},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Eine zielf{\"u}hrende Anwendung von Zusatzmitteln bei der Ausf{\"u}hrung anspruchsvoller Betonbauten setzt einen hohen Kenntnisstand bez{\"u}glich der Wirkungsmechanismen und Interaktionen der einzelnen Betonkomponenten voraus. In der vorliegenden Arbeit wurden einige Aspekte der Zementhydratation in Abh{\"a}ngigkeit von der Fließmittelzugabe diskutiert. Im Ergebnis liefern die Teile eins und zwei der vorliegenden Arbeit einen Beitrag dazu, Ver{\"a}nderungen der Fließf{\"a}higkeit von Zementleim in Abh{\"a}ngigkeit der Zementhydratation und Fließmittelzugabe besser zu verstehen. Es konnte so z.B. gezeigt werden, dass Bildung langprismatischer Kristalle (z.B. Syngenit, Gips) die Fließf{\"a}higkeit von Zementleim und Beton vermindert. Infolge anhaltender Scherung von Zementleimen / Betonen mit langprismatischen Kristallen wird ein Zuwachs an Fließf{\"a}higkeit erzielt. Elektronenmikroskopische Untersuchungen zeigen, dass dies darauf zur{\"u}ckzuf{\"u}hren ist, dass die Kristalle in eine Vorzugsorientierung relativ zur Scherbewegung rotieren. Weiterhin wurde der Mechanismus einer so genannten Zement-Fließmittel-Inkompatibilit{\"a}t aufgezeigt. Durch diese Erweiterung des Kenntnisstandes zum Einfluss von Fließmitteln auf die Zementhydratation ist es m{\"o}glich der Zement-Fließmittel-Inkompatibilit{\"a}t durch gezielte Auswahl des Zementes vorzubeugen. Dabei ist besonders darauf zu achten, dass der Zement ein ausgewogenes Verh{\"a}ltnis an zur Reaktion zur Verf{\"u}gung stehendem C3A und Menge / L{\"o}slichkeit des Abbindereglers besitzt. Fließmittel ver{\"a}ndern nicht nur die Verarbeitungseigenschaften sondern auch die Festigkeit und Dauerhaftigkeit von Zementstein und Beton. Im dritten Teil der vorliegenden Arbeit wird daher der Einfluss der Fließmittel und deren verfl{\"u}ssigender Wirkung auf die Festigkeitsentwicklung von Zementstein und C3S untersucht. Es konnte gezeigt werden, dass durch die dispergierende Wirkung der Fließmittel auch ohne Verminderung des Wasserzementwertes, eine Verdichtung des Zementsteingef{\"u}ges erzielt werden kann. Es konnte weiterhin gezeigt werden, dass durch die Erh{\"o}hung der Partikelpackungsdichte am Anfang der Hydratation die Ausbildung der festigkeitsgebenden C-S-H Phasen ver{\"a}ndert wird. Ein dichteres Verwachsen dieser nanostrukturierten C-S-H Phasen erm{\"o}glicht einen zus{\"a}tzlichen Festigkeitszuwachs.},
  subject      = {Zement},
  language  = {de}
}
@inproceedings{ErikssonKettunen,
  author    = {Eriksson, Sirkka-Liisa and Kettunen, Jarkko},
  title     = {HYPERMONOGENIC POLYNOMIALS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2950},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29509},
  pages     = {22},
  abstract  = {It is well know that the power function is not monogenic. There are basically two ways to include the power function into the set of solutions: The hypermonogenic functions or holomorphic Cliffordian functions. L. Pernas has found out the dimension of the space of homogenous holomorphic Cliffordian polynomials of degree m, but his approach did not include a basis. It is known that the hypermonogenic functions are included in the space of holomorphic Cliffordian functions. As our main result we show that we can construct a basis for the right module of homogeneous holomorphic Cliffordian polynomials of degree m using hypermonogenic polynomials and their derivatives. To that end we first recall the function spaces of monogenic, hypermonogenic and holomorphic Cliffordian functions and give the results needed in the proof of our main theorem. We list some basic polynomials and their properties for the various function spaces. In particular, we consider recursive formulas, rules of differentiation and properties of linear independency for the polynomials.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Ostrowski,
  author    = {Ostrowski, M.},
  title     = {INTEGRATED MATHEMATICAL MODELLING AS A BASIS FOR DECISION MAKING IN WATER MANAGEMENT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2997},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29979},
  pages     = {9},
  abstract  = {Water resources development and management is a complex problem. It includes the design and operation of single system components, often as part of larger interrelated systems and usually on the basis of river basins. While several decades ago the dominant objective was the maximization of economic benefit, other objectives have evolved as part of the sustainable development envisaged. Today, planning and operation of larger water resources systems is practically impossible without adequate computer tools, normally being one or several models, increasingly combined with data bank management systems and multi criteria assessment procedures in decision support systems. The use of models in civil engineering already has a long history when structural engineering is considered. These design support models, however, must rather be seen as expert systems made to support the engineer with his daily work. They often have no direct link to stakeholders and the decision makers community. The scale of investigation is often much larger in water resources engineering than in structural engineering which is related to different stakeholders and decision making procedures. Still, several similarities are obvious which can be summarized as the search for a compromise solution on a complex, i.e. multiobjective and interdisciplinary decision problem. While in structural engineering e.g. aestetics, stability and energy consumption might be important evaluation criteria in addition to construction and maintenance cost other or additional criteria have to be considered in water resources planning such as political, environmental and social criteria. In this respect civil engineers tend to overemphasize technical criteria. For the future the existing expert systems should be embedded into an improved decision support shell, keeping in mind that decision makers are hardly interested in numerical modelling results. The paper will introduce into the problem and demonstrate the state of the art by means of an example.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KlawitterOstrowski,
  author    = {Klawitter, Arne and Ostrowski, M.},
  title     = {INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2976},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29767},
  pages     = {12},
  abstract  = {A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@article{Both2006,
  author    = {Both, Petra von},
  title     = {Integration von Informationsprozessen auf der Basis von Nemetschek Technologien},
  doi       = {10.25643/bauhaus-universitaet.851},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8511},
  year      = {2006},
  subject      = {Weimar / Bauhaus-Universit{\"a}t / Professur Baubetrieb und Bauverfahren},
  language  = {de}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {INTEGRIERTE SYSTEMBEDIENUNG IN GEB{\"A}UDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3013},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30132},
  pages     = {7},
  abstract  = {R{\"a}ume und Geb{\"a}ude sind heute wegen der enormen Funktionalit{\"a}t der technischen Geb{\"a}udeausr{\"u}stung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl f{\"u}r Wohn- als auch f{\"u}r Zweckimmobilien. Die Geb{\"a}udeleittechnik (GLT) und die Geb{\"a}udeautomation (GA) k{\"o}nnen hier unter sinnvoller Integration der M{\"o}glichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsb{\"u}ndelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Geb{\"a}udeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Ger{\"a}ten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil v{\"o}llig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausr{\"u}stungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundz{\"u}ge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterf{\"u}hrende Aktivit{\"a}ten.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{StoimenovaLinsDatchevaetal.,
  author    = {Stoimenova, Eugenia and Lins, Yvonne and Datcheva, Maria and Schanz, Tom},
  title     = {INVERSE MODELLING OF SOIL HYDRAULIC CHARACTERISTIC FUNCTIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2985},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29858},
  pages     = {12},
  abstract  = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content θ and suction ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of θ for any position along the column and (b) give the functional form for the scanning curves.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LutherKoenke,
  author    = {Luther, Torsten and K{\"o}nke, Carsten},
  title     = {INVESTIGATION OF CRACK GROWTH IN POLYCRYSTALLINE MESOSTRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2988},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29886},
  pages     = {11},
  abstract  = {The design and application of high performance materials demands extensive knowledge of the materials damage behavior, which significantly depends on the meso- and microstructural complexity. Numerical simulations of crack growth on multiple length scales are promising tools to understand the damage phenomena in complex materials. In polycrystalline materials it has been observed that the grain boundary decohesion is one important mechanism that leads to micro crack initiation. Following this observation the paper presents a polycrystal mesoscale model consisting of grains with orthotropic material behavior and cohesive interfaces along grain boundaries, which is able to reproduce the crack initiation and propagation along grain boundaries in polycrystalline materials. With respect to the importance of modeling the geometry of the grain structure an advanced Voronoi algorithm is proposed to generate realistic polycrystalline material structures based on measured grain size distribution. The polycrystal model is applied to investigate the crack initiation and propagation in statically loaded representative volume elements of aluminum on the mesoscale without the necessity of initial damage definition. Future research work is planned to include the mesoscale model into a multiscale model for the damage analysis in polycrystalline materials.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KimuraMakinoMaegaitoetal.,
  author    = {Kimura, Atsushi and Makino, Y. and Maegaito, Kentaro and Suzuki, Osamu},
  title     = {ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE (II) (THE VISUAL IMPRESSIONS GIVEN BY DESIGN-PATTERNS)},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2973},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29731},
  pages     = {4},
  abstract  = {The present study was designed to investigate the underlying factors determining the visual impressions of design-patterns that have complex textures. Design-patterns produced by "the dynamical system defined by iterations of discrete Laplacians on the plane lattice" were adopted as stimuli because they were not only complex, but also defined mathematically. In the experiment, 21 graduate and undergraduate students sorted 102 design-patterns into several groups by visual impressions. Those 102 patterns were classified into 12 categories by the cluster analysis. The results showed that the regularity of pattern was a most efficient factor for determining visual impressions of design-pattern, and there were some correspondence between visual impressions and mathematical variables of design-pattern. Especially, the visual impressions were influenced greatly by the neighborhood, and less influenced by steps of iterations.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{AibaMaegaitoSuzuki,
  author    = {Aiba, Yoshihisa and Maegaito, Kentaro and Suzuki, Osamu},
  title     = {Iteration dynamical systems of discrete Laplacians on the plane lattice(I) (Basic properties and computer simulations of the dynamical systems)},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2917},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29178},
  pages     = {3},
  abstract  = {In this study we introduce a concept of discrete Laplacian on the plane lattice and consider its iteration dynamical system. At first we discuss some basic properties on the dynamical system to be proved. Next making their computer simulations, we show that we can realize the following phenomena quite well:(1) The crystal of waters (2) The designs of carpets, embroideries (3) The time change of the numbers of families of extinct animals, and (4) The echo systems of life things. Hence we may expect that we can understand the evolutions and self organizations by use of the dynamical systems. Here we want to make a stress on the following fact: Although several well known chaotic dynamical systems can describe chaotic phenomena, they have difficulties in the descriptions of the evolutions and self organizations.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Heinrich,
  author    = {Heinrich, Timo},
  title     = {KENNZEICHNUNGSBASIERTER ZUGRIFF VON PROZESSMODELLEN AUF OBJEKTBEST{\"A}NDE DES BAUWESENS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2966},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29669},
  pages     = {13},
  abstract  = {F{\"u}r eine beherrschbare Koordination und Durchf{\"u}hrung von Planungsaufgaben in Bauprojekten wird der Planungsprozess zunehmend in formalisierten Modellen - Prozessmodellen - beschrieben. Die Produktmodellforschung ihrerseits widmet sich der Speicherung von Planungsdaten in Form von objektorientierten Modellen im Rechner. Hauptaugenmerk sind dabei die Wahrung der Konsistenz und die Modellierung von Abh{\"a}ngigkeiten innerhalb dieses Planungsmaterials. Der Bezug zu den Akteuren der Planung wird nicht direkt hergestellt. Ein formal beschriebener Planungsprozesses kann in der Praxis noch nicht derart realisiert werden, dass ein Zugriff auf Einzelobjekte des Planungsprozesses gew{\"a}hrleistet ist. Bestehende Planungsunterst{\"u}tzungs- und Workflowmanagement-Systeme abstrahieren und ordnen das Planungsmaterial nach wie vor auf Dateiebene. Der vorliegende Artikel beschreibt eine Methode f{\"u}r die geeignete Verbindung von formalisierten Prozessmodellen in der Bauplanung mit den Einzelobjekten, die in den modellorientierten Objektmengen kodiert sind. Dabei wird die Zugeh{\"o}rigkeit bestimmter Objekte zu Pl{\"a}nen und Dokumenten (zum Zwecke des Datenaustauschs) nicht l{\"a}nger durch die physische Zuordnung zu Dateien festgelegt. Es wird ein formales Beschreibungsmittel vorgestellt, welches die entsprechende Teilmengenbildung aus der Gesamtheit der Planungsobjekte erm{\"o}glicht. F{\"u}r die bisherigen Formen des Datenaustausches werden aus den Objektmodellen der Planung Teilmengen herausgel{\"o}st und physikalisch zwischen den Planern transportiert. Das neue Beschreibungsmittel hingegen erlaubt es, die Bildungsvorschrift f{\"u}r Objektteilmengen statt der Mengen selbst zwischen den Planern auszutauschen. Der Zugriff auf die konkreten Objekte findet dann direkt modellbasiert statt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{RueppelMeissnerLange,
  author    = {R{\"u}ppel, Uwe and Meißner, Udo F. and Lange, Michael},
  title     = {KOOPERATIVE BRANDSCHUTZPLANUNG MIT SOFTWARE-AGENTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3007},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30071},
  pages     = {10},
  abstract  = {Die effektive Kooperation aller beteiligten Fachplaner im Bauplanungsprozess ist die Voraussetzung f{\"u}r wirtschaftliches und qualitativ hochwertiges Bauen. Bauprojektorganisationen bestehen in der Regel aus zahlreichen unabh{\"a}ngigen Planungspartnern, die {\"o}rtlich verteilt spezifische Planungsaufgaben bearbeiten und die Ergebnisse in Teilproduktmodellen ablegen. Da Planungsprozesse im Bauwesen stark arbeitsteilig ablaufen, sind die Teilproduktmodelle der einzelnen Fachplanungen in hohem Maße voneinander abh{\"a}ngig. Ziel des hier vorgestellten Ansatzes ist die Integration der Teilproduktmodelle der Geb{\"a}udeplanung in einem netzwerkbasierten Modellverbund am Beispiel der Brandschutzplanung. Im Beitrag werden die Probleme der Verteiltheit und insbesondere der semantischen Heterogenit{\"a}t der involvierten Teilproduktmodelle betrachtet. Der verteilte Zugriff wird mithilfe mobiler Software-Agenten realisiert. Die Agenten k{\"o}nnen sich dabei frei im netzwerkbasierten Planungsverbund bewegen und agieren als Vertreter der Fachplaner. Das Problem der semantischen Heterogenit{\"a}t der Teilproduktmodelle wird auf der Basis von Ontologien gel{\"o}st. Dazu werden erstens Dom{\"a}nenontologien entwickelt, die Objekte der realen Welt einer abgeschlossenen Dom{\"a}ne, hier des Brandschutzes, abbilden. Zweitens werden Applikationsontologien entwickelt, die die einzelnen propriet{\"a}ren Datenhaltungen (im Sinne von Teilproduktmodellen) der jeweiligen Fachplanungen repr{\"a}sentieren. Beide Ontologien werden mit einem regelbasierten Ansatz verkn{\"u}pft. Im vorgestellten Anwendungsfall Brandschutz dient die Dom{\"a}nenontologie als einheitliche Schnittstelle f{\"u}r den Zugriff auf die verteilten Modelle und abstrahiert dabei von deren Datenbankspezifika und propriet{\"a}ren Schemata. Mithilfe von mobilen Agenten und semantischen Technologien kann so eine Plattform zur Verf{\"u}gung gestellt werden, die erstens die dynamische Integration von Ressourcen in den Planungsverbund erlaubt und zweitens auf deren Basis unabh{\"a}ngig von der Verteiltheit und Heterogenit{\"a}t der eingebundenen Ressourcen ingenieurgerechte Verarbeitungsmethoden realisiert werden k{\"o}nnen.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@phdthesis{Brandstetter2006,
  author    = {Brandstetter, Thomas},
  title     = {Kr{\"a}fte messen. Die Maschine von Marly und die Kultur der Technik 1680-1840},
  doi       = {10.25643/bauhaus-universitaet.760},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060702-7984},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {Die Arbeit besch{\"a}ftigt sich mit der Entstehung eines {\"o}konomischen Kraftmaßes am Beispiel der Maschine von Marly im Zeitraum von ca. 1680 bis 1840. Die Leitthese der Dissertation besagt, dass vom 17. zum 19. Jahrhundert eine grundlegende Transformation des Maschinenbegriffs stattfand, die als {\"U}bergang vom Substanzbegriff zum Funktionsbegriff der Maschine bezeichnet werden kann. Im 17. Jahrhundert wurden mechanische Apparate als in sich geschlossene, selbstbez{\"u}gliche Strukturen aufgefasst. Als anschaulich erfahrbare Objekte konnten sie als Bildgeber dienen, die mittels des Verfahrens der Strukturanalogie Erkl{\"a}rungsmuster f{\"u}r verschiedenste Ph{\"a}nomene (K{\"o}rper, Staat, Welt) boten. Demzufolge galten sie als selbstevident: sie waren erkl{\"a}rend und mussten selbst nicht erkl{\"a}rt werden. Ihr etwaiger Zweck und ihre Einbettung in gesellschaftliche Zusammenh{\"a}nge spielten dabei keine Rolle. Wie anhand der Beschreibungen und Darstellungen aus jener Zeit nachgewiesen werden kann, wurde die Maschine von Marly innerhalb dieser Episteme als architektonisches Objekt wahrgenommen, bei dem vor allem das Zusammenspiel der einzelnen Elemente Aufmerksamkeit erregte. Wie andere Maschinen auch stand sie unter dem Primat der Sichtbarkeit. Man war davon {\"u}berzeugt, dass die Eigenschaften einer Maschine von der strukturellen Anordnung ihrer Bauteile abhingen und glaubte, ihre Qualit{\"a}t an ihrer Gestalt ablesen zu k{\"o}nnen. Ab der Mitte des 18. Jahrhunderts tauchte die Maschine von Marly in den Schriften physiokratischer Autoren auf. Zuerst diente sie dort als Beispiel f{\"u}r die Verschwendungssucht Louis' XIV. und als Metapher f{\"u}r eine schlechte Einrichtung des Staates. Doch zunehmend begann man, sie auch in ihrer Faktizit{\"a}t als technisch-politisches Objekt zu begreifen. Man kritisierte ihre aktuelle Nutzung und schlug andere M{\"o}glichkeiten ihrer Verwendung vor, etwa die Bew{\"a}sserung von Feldern oder die st{\"a}dtische Trinkwasserversorgung. Damit war die Maschine von Marly nicht l{\"a}nger ein Modell f{\"u}r die Einrichtung des Staates, das nur am Maßstab der immanenten Perfektion beurteilt werden konnte. Vielmehr war sie nun ein Instrument der Regierung, das sich als Teil eines staatlich verfassten Gemeinwesens verantworten musste. Als solches wurde sie auch zu einem bevorzugten Gegenstand aufkl{\"a}rerischer Reformprojekte. Das zeigt sich besonders deutlich am Wettbewerb, den die Pariser Akademie der Wissenschaften 1784-1786 organisiert hatte und der Vorschl{\"a}ge zur Verbesserung oder Ersetzung der Maschine von Marly zum Gegenstand hatte. Die Auswertung der mehr als 100 eingereichten Projekte und Memoranden erm{\"o}glicht einen einzigartigen Blick auf die Hoffnungen und W{\"u}nsche, die Ende des 18. Jahrhunderts an die Erfindung technischer Ger{\"a}te gekoppelt waren. Um 1800 kann man die allm{\"a}hliche Entstehung eines Funktionsbegriffs der Maschine bemerken. Lazare Carnots Essai sur les machines en g{\´e}n{\´e}ral, der eine in der Sprache der Algebra artikulierte Definition der Maschine beinhaltete, trug maßgeblich dazu bei, die Anschaulichkeit zugunsten eines operativen Symbolismus zu delegitimieren. Erst dadurch war die Formulierung eines Effizienzkalk{\"u}ls m{\"o}glich. Erg{\"a}nzt wurde diese Formalisierung durch den Diskurs der Industrialisierung, in dem technische Apparate zunehmend als Produktionsmittel verstanden wurden. Die Maschine von Marly war ein wichtiger Schauplatz f{\"u}r die Entstehung eines {\"o}konomischen Kraftmaßes. Nicht nur wurden dort Experimente mit verschiedenen Messinstrumenten (Dynamometern) durchgef{\"u}hrt, auch diente sie Joseph Montgolfier als Beispiel um zu beweisen, dass Kraft als Geldwert ausgedr{\"u}ckt werden k{\"o}nne. In den ersten Jahrzehnten des 19. Jahrhundert wurden Maschinen schließlich relational als Positionen innerhalb eines nationalen Produktionssystems definiert. Sie galten als Krafttransformatoren, bei denen ein bestimmter Input von ‚force motrice' einen entsprechenden Output von ‚travail utile' ergeben w{\"u}rde. Ihre vornehmlichste Aufgabe war die m{\"o}glichst effiziente Ausnutzung der Kraftressourcen. Den vorl{\"a}ufigen Endpunkt erreichte die Entstehung des {\"o}konomischen Kraftmaßes um 1830 mit der Formulierung des Begriffs der ‚mechanischen Arbeit'.},
  subject      = {Technik / Geschichte},
  language  = {de}
}
@inproceedings{Stangenberg,
  author    = {Stangenberg, Friedhelm},
  title     = {LIFETIME ORIENTED DESIGN CONCEPTS UNDER ASPECTS OF DEGRADATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2915},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170328-29154},
  pages     = {25},
  abstract  = {Optimum technological solutions must take into account the entire life cycle of structures including design procedures as well as quality assurance, inspection, maintenance, and repair strategies. Unfortunately, current design standards do not provide a satisfactory basis to ensure expected structural lifetimes. The latter may vary from only a few years for temporary structures to over a century for bridges, water dams or nuclear repositories. Consistent scientific concepts are urgently required to cover this wide spectrum of lifetimes in structural design and maintenance. This was a motivation for a group of scientists at the Ruhr-University Bochum (RUB) to start a special research program supported by the German Research Foundation (DFG) within the Cooperative Research Center SFB 398 since 1996. Institutes of the University Wuppertal and of the University Essen-Duisburg joined the research group. The goal of the Center is to study sources of damage and deterioration in materials and structures, to develop consistent models and simulation methods, to predict structural lifetimes and finally to integrate this predictions into new lifetime-oriented design strategies. Research activities in our center are organised in three Project Groups as follows: - Modelling of lifetime effects - Methods for lifetime-oriented structural analyses - Future lifespan-oriented design strategies.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{GalffyBaitschWellmannJelicetal.,
  author    = {Galffy, Mozes and Baitsch, Matthias and Wellmann Jelic, Andres and Hartmann, Dietrich},
  title     = {LIFETIME-ORIENTED OPTIMIZATION OF BRIDGE TIE RODS EXPOSED TO VORTEX-INDUCED ACROSS-WIND VIBRATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2956},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29561},
  pages     = {12},
  abstract  = {In recent years, damages in welded connections plates of vertical tie rods of several arched steel bridges have been reported. These damages are due to fatigue caused by wind-induced vibrations. In the present study, such phenomena are examined, and the corresponding lifetime of a reference bridge in M{\"u}nster-Hiltrup, Germany, is estimated, based on the actual shape of the connection plate. Also, the results obtained are compared to the expected lifetime of a connection plate, whose geometry has been optimized separately. The structural optimization, focussing on the shape of the cut at the hanger ends, has been carried out using evolution strategies. The oscillation amplitudes have been computed by means of the Newmark-Wilson time-step method, using an appropriate load model, which has been validated by on-site experiments on the selected reference bridge. Corresponding stress-amplitudes are evaluated by multiplying the oscillation amplitudes with a stress concentration factor. This factor has been computed on the basis of a finite element model of the system "hanger-welding-connection plate", applying solid elements, according to the notch stress approach. The damage estimation takes into account the stochastics of the exciting wind process, as well as the stochastics of the material parameters (fatigue strength) given in terms of Woehler-curves. The shape optimization results in a substantial increase of the estimated hanger lifetime. The comparison of the lifetimes of the bulk plate and of the welding revealed that, in the optimized structure, the welding, being the most sensitive part in the original structure, shows much more resistance against potential damages than the bulk material.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Eickelkamp,
  author    = {Eickelkamp, Jens Peter},
  title     = {LIQUIDIT{\"A}TSPLANUNG VON BAUPROJEKTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2948},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29483},
  pages     = {12},
  abstract  = {Die Liquidit{\"a}tsplanung von Bauunternehmen XE "Liquidit{\"a}tsplanung" gilt als ein wesentliches Steuerungs-, Kontroll- sowie Informationsinstrument f{\"u}r interne und externe Adressaten und {\"u}bt eine Entscheidungsunterst{\"u}tzungsfunktion aus. Da die einzelnen Bauprojekte einen wesentlichen Anteil an den Gesamtkosten des Unternehmens ausmachen, besitzen diese auch einen erheblichen Einfluß auf die Liquidit{\"a}t und die Zahlungsf{\"a}higkeit der Bauunternehmung. Dem folgend ist es in der Baupraxis eine {\"u}bliche Verfahrensweise, die Liquidit{\"a}tsplanung zuerst projektbezogen zu erstellen und anschließend auf Unternehmensebene zu verdichten. Ziel der Ausf{\"u}hrungen ist es, die Zusammenh{\"a}nge von Arbeitskalkulation XE "Arbeitskalkulation" , Ergebnisrechnung XE "Ergebnisrechnung" und Finanzrechnung XE "Finanzrechnung" in Form eines deterministischen XE "Erkl{\"a}rungsmodells" Planungsmodells auf Projektebene darzustellen. Hierbei soll das Verst{\"a}ndnis und die Bedeutung der Verkn{\"u}pfungen zwischen dem technisch-orientierten Bauablauf und dessen Darstellung im Rechnungs- und Finanzwesen herausgestellt werden. Die Vorg{\"a}nge aus der Bauabwicklung, das heißt die Abarbeitung der Bauleistungsverzeichnispositionen und deren zeitliche Darstellung in einem Bauzeitenplan sind periodisiert in Gr{\"o}ßen der Betriebsbuchhaltung (Leistung, Kosten) zu transformieren und anschließend in der Finanzrechnung (Einzahlungen., Auszahlungen) nach Kreditoren und Debitoren aufzuschl{\"u}sseln.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SzarataStarostina,
  author    = {Szarata, Andrzej and Starostina, T.},
  title     = {MAMDANI'S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3025},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30257},
  pages     = {1},
  abstract  = {This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MalonekFalcaoSilva,
  author    = {Malonek, Helmuth Robert and Falc{\~a}o, M. Irene and Silva, Ant{\´o}nio},
  title     = {MAPLE TOOLS FOR MODIFIED QUATERNIONIC ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2953},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29535},
  pages     = {7},
  abstract  = {At the 16th IKM Bock, Falc{\~a}o and G{\"u}rlebeck presented examples of the application of some specially developed Maple-Software in hypercomplex analysis. Other papers of those authors continued this work and showed the efficiency of such tools for concrete numerical calculations as well as for numerical experiments, supporting the detection of new relationships and even theorems in a highly technical theoretical work. The mentioned software has been developed mainly for the use on mapping problems in the Euclidean spaces of dimension 3 and 4 by means of Bergman kernel methods (BKM), which are related to monogenic functions as solutions of generalized Cauchy-Riemann equations with respect to the Euclidean metric (Riesz system). The developed procedures concerning generalized powers of totally regular variables and the corresponding homogeneous polynomials basically rely on results and conventions introduced in the paper "Power series representation for monogenic functions in Rm+1 based on a permutational product", Complex Variables, 15, No.3, 181-191 (1990) by H. Malonek. Since 1992 H. Leutwiler, S. L. Eriksson and others developed in a number of papers a modified Clifford analysis and, particularly, a modified quaternionic analysis. The modification mainly consists in considering generalized Cauchy-Riemann equations with respect to a hyperbolic metric in a half space. The aim of this contribution is to show how through a change of the basic combinatorial relations used in the modified quaternionic analysis the aforementioned Maple-software (that has been recently published on CD-Rom as integrated part of the text book "Funktionentheorie in der Ebene und im Raum" by K. G{\"u}rlebeck, K. Habetha, and W. Spr{\"o}ssig, in the series "Grundstudium Mathematik" of Birkh{\"a}user Verlag, 2006) can directly be used for numerical calculations in the modified theory.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Ubysz,
  author    = {Ubysz, Andrzej},
  title     = {MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3029},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30294},
  pages     = {7},
  abstract  = {The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro-creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@phdthesis{Gehrmann2006,
  author    = {Gehrmann, Hans-Joachim},
  title     = {Mathematische Modellierung und experimentelle Untersuchungen zur Pyrolyse von Abf{\"a}llen in Drehrohrsystemen},
  doi       = {10.25643/bauhaus-universitaet.772},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060806-8119},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2006},
  abstract  = {F{\"u}r die Optimierung eines bereits bestehenden Prozesses, z.B. im Hinblick auf den maximal m{\"o}glichen Durchsatz bei gleich bleibender Qualit{\"a}t der Pyrolyseprodukte oder f{\"u}r die Einstellung der Betriebsparameter bei einem unbekannten Einsatzstoff, kann ein mathematisches Modell eine erste Absch{\"a}tzung f{\"u}r die Einstellung betrieblicher Parameter, wie z.B. Temperaturprofile im Gas und Feststoff, geben. Dar{\"u}ber hinaus kann man mit einem Modell f{\"u}r neu zu konzipierende Anlagen konstruktive Parameter ermitteln oder {\"u}berpr{\"u}fen. In dem hier dargestellten vereinfachten Modellansatz werden u. a. die Umsatzvorg{\"a}nge f{\"u}r ein Partikelkollektiv mit Hilfe von Summenparametern aus Untersuchungen an einer Thermowaage und erg{\"a}nzend im Drehrohr ermittelt. Das Prozessmodell basiert auf einem Reaktormodell, das das Verweilzeitverhalten des Einsatzstoffes im Reaktor beschreibt und einem Basismodell, bestehend aus Massen- und Energiebilanzen f{\"u}r Solid und Gas sowie Ans{\"a}tzen zur Trocknung und zum Umsatz. Im Hinblick auf die Verf{\"u}gbarkeit von stoffspezifischen Daten von Abf{\"a}llen sind insbesondere zur Berechnung des Verweilzeitverhaltens und des Umsatzes im Heißbetrieb vereinfachende Ans{\"a}tze durch die Bildung von Summenparametern hilfreich. Das Prozessmodell wurde schrittweise validiert: Zun{\"a}chst wurde in Kaltversuchen ein Summenparameter, der u.a. die unbekannten Reibungsverh{\"a}ltnisse im Drehrohr ber{\"u}cksichtigt, durch Vergleich von Experiment und Rechnung f{\"u}r Sand ermittelt. F{\"u}r heterogene Abfallgemische kann dieser Materialfaktor zwar f{\"u}r Kaltversuche bestimmt werden (soweit dies f{\"u}r Abf{\"a}lle m{\"o}glich ist), im Heißbetrieb {\"a}ndern sich jedoch alle wesentlichen Stoffparameter wie Partikeldurchmesser, Sch{\"u}ttdichte und Sch{\"u}ttwinkel sowie die Reibungsverh{\"a}ltnisse. F{\"u}r diesen Fall wird der Materialfaktor zu Eins gesetzt und die wesentlichen Stoffgr{\"o}ßen umsatzabh{\"a}ngig modelliert. Dazu ist die Kenntnis der Sch{\"u}ttdichten, statischen Sch{\"u}ttwinkel und mittleren Partikeldurchmesser vom Abfall und Koks aus dem Abfall notwendig. Die mit diesen Stoffdaten berechnete Verweilzeit wurde in einem Heißversuch bei der Pyrolyse von Brennstoff aus M{\"u}ll- (BRAM) Pellets mit einem Fehler von ca. 20 \% erreicht. Das Basismodell wurde zun{\"a}chst ohne Umsatz an Messergebnisse mit Sand im Drehrohr unter Variation von Temperaturen und Massenstrom angepasst bevor mit diesem Modell die Pyrolyse von einem homogenen Einsatzstoff (Polyethylen mit Sand) im Drehrohr berechnet wurde. Hier konnte bereits gezeigt werden, dass mit diesem vereinfachten Modellansatz gute Ergebnisse beim Vergleich von Modell und Experiment erzielt werden k{\"o}nnen. Im n{\"a}chsten Schritt wurde der Sand angefeuchtet, um die Teilmodelle der Trocknung unterhalb und bei Siedetemperatur zu validieren. Die Mess- und Modellierungsergebnisse stimmen gut miteinander {\"u}berein. F{\"u}r ein Abfallgemisch aus BRAM-Pellets konnte der Verlauf der Solidtemperaturen unter der Ber{\"u}cksichtigung variabler Stoffwerte des Solids und eines Verschmutzungsfaktors, der den Belag des Drehrohres mit anklebendem Pellets bis zur Verkokung ber{\"u}cksichtigt, gut wiedergegeben werden. Die Gastemperaturen k{\"o}nnen in erster N{\"a}herung ausreichend genau durch das mathematische Modell beschrieben werden. Mit diesem vereinfachten mathematischen Modellansatz steht nun ein Hilfsmittel zur Auslegung und Optimierung von indirekt beheizten Drehrohren zur Verf{\"u}gung, um bei einem neuen Einsatzstoff mit Daten aus experimentellen Basisuntersuchungen, die Temperaturverl{\"a}ufe im Feststoff und Gas sowie die Gaszusammensetzung in Abh{\"a}ngigkeit der wesentlichen Einflussgr{\"o}ßen abzusch{\"a}tzen.},
  subject      = {Pyrolyse},
  language  = {de}
}
@article{HaefnerEckardtLutheretal.,
  author    = {H{\"a}fner, Stefan and Eckardt, Stefan and Luther, Torsten and K{\"o}nke, Carsten},
  title     = {Mesoscale modeling of concrete: Geometry and numerics},
  series = {Computers and Structures},
  journal   = {Computers and Structures},
  pages     = {450 -- 461},
  abstract  = {Mesoscale modeling of concrete: Geometry and numerics},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{MusialUbyszUlatowski,
  author    = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr},
  title     = {METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2996},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29965},
  pages     = {8},
  abstract  = {The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BartelsZimmermann,
  author    = {Bartels, Jan-Hendrik and Zimmermann, J{\"u}rgen},
  title     = {MINIMIZING THE TOTAL DISCOUNTED COST OF DISMANTLING A NUCLEAR POWER PLANT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2920},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29200},
  pages     = {9},
  abstract  = {Due to economical, technical or political reasons all over the world about 100 nuclear power plants have been disconnected until today. All these power stations are still waiting for their complete dismantling which, considering one reactor, causes cost of up to one Bil. Euros and lasts up to 15 years. In our contribution we present a resource-constrained project scheduling approach minimizing the total discounted cost of dismantling a nuclear power plant. A project of dismantling a nuclear power plant can be subdivided into a number of disassembling activities. The execution of these activities requires time and scarce resources like manpower, special equipment or storage facilities for the contaminated material arising from the dismantling. Moreover, we have to regard several minimum and maximum time lags (temporal constraints) between the start times of the different activities. Finally, each disassembling activity can be processed in two alternative execution modes, which lead to different disbursements and determine the resource requirements of the considered activity. The optimization problem is to determine a start time and an execution mode for each activity, such that the discounted cost of the project is minimum, and neither the temporal constraints are violated nor the activities' resource requirements exceed the availability of any scarce resource at any point in time. In our contribution we introduce an appropriate multi-mode project scheduling model with minimum and maximum time lags as well as renewable and cumulative resources for the described optimization problem. Furthermore, we show that the considered optimization problem is NP-hard in the strong sense. For small problem instances, optimal solutions can be gained from a relaxation based enumeration approach which is incorporated into a branch and bound algorithm. In order to be able to solve large problem instances, we also propose a truncated version of the devised branch and bound algorithm.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Klauer,
  author    = {Klauer, Thomas},
  title     = {MOBILE FACILITY MANAGEMENT ZUR INSPEKTION UND INSTANDHALTUNG VON INGENIEURBAUWERKEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2975},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29759},
  pages     = {10},
  abstract  = {In diesem Beitrag wird eine mobile Software-Komponente zur Vor-Ort-Unterst{\"u}tzung von Bauwerkspr{\"u}fungen gem{\"a}ß DIN 1076 „Ingenieurbauwerke im Zuge von Strassen und Wegen, {\"U}berwachung und Pr{\"u}fung" vorgestellt, welche sich im praktischen Einsatz bei der Hochbahn AG Hamburg befindet. Mit Hilfe dieses Werkzeugs kann die Aktivit{\"a}t am Bauwerk in den gesamten softwaregest{\"u}tzten Gesch{\"a}ftsprozess der auwerksinstandhaltung integriert und somit die Bearbeitungszeit einer Bauwerkspr{\"u}fung von der Vorbereitung bis zur Pr{\"u}fbericht-Erstellung reduziert werden. Die Technologie des Mobile Computing wird unter Ber{\"u}cksichtigung spezieller fachlicher Randbedingungen, wie z.B. dem Einsatzort unter freiem Himmel, erl{\"a}utert und es werden Methoden zur effizienten Datenerfassung mit Stift und Sprache vorgestellt und bewertet. Ferner wird die Einschr{\"a}nkung der Hardware durch die geringere Gr{\"o}ße der Endger{\"a}te, die sich durch die Bedingung der Mobilit{\"a}t ergibt, untersucht.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{BauerKandlerWeiss,
  author    = {Bauer, Marek and Kandler, A. and Weiß, Hendrik},
  title     = {MODEL OF TRAM LINE OPERATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2921},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29217},
  pages     = {11},
  abstract  = {From passenger's perspective punctuality is one of the most important features of trams operations. Unfortunately in most cases this feature is only insufficiently fulfilled. In this paper we present a simulation model for trams operation with special focus on punctuality. The aim is to get a helpful tool for designing time-tables and for analyzing the effects by changing priorities for trams in traffic lights respectively the kind of track separation. A realization of trams operations is assumed to be a sequence of running times between successive stops and times spent by tram at the stops. In this paper the running time is modeled by the sum of its mean value and a zero-mean random variable. With the help of multiple regression we find out that the average running time is a function depending on the length of the sections and the number of intersections. The random component is modeled by a sum of two independent zero-mean random variables. One of these variables describes the disturbance caused by the process of waiting at an intersection and the other the disturbance caused by the process of driving. The time spent at a stop is assumed to be a random variable, too. Its distribution is estimated from given measurements of these stop times for different tram lines in Krak{\´o}w. Finally a special case of the introduced model is considered and numerical results are presented. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WittwerBecker,
  author    = {Wittwer, Christof and Becker, Rainer},
  title     = {MODELLBASIERTE ERTRAGSKONTROLLE F{\"U}R PV ANLAGEN IN VERNETZTEN GEB{\"A}UDEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3036},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30363},
  pages     = {5},
  abstract  = {Subject of the paper is the realisation of a model based efficiency control system for PV generators using a simulation model. A standard 2-diodes model of PV generator is base of the ColSim model, which is implemented in ANSI C code for flexible code exporting. The algorithm is based on discretisized U-I characteristics, which allows the calculation of string topologies witch parallel and serial PV cells and modules. Shadowing effects can be modelled down to cell configuration using polar horizon definitions. The simulation model was ported to a real time environment, to calculate the efficiency of a PV system. Embedded System technology allows the networked operation and the integration of standard I/O devices. Futher work focus on the adaption of shadowing routine, which will be adapted to get the environment conditions from the real operation.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{RogożaStachonUbysz,
  author    = {Rogoża, Agnieszka and Stachon, T. and Ubysz, Andrzej},
  title     = {MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3005},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30050},
  pages     = {6},
  abstract  = {The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@misc{Kohout2006,
  author    = {Kohout, Christian},
  title     = {Modelluntersuchungen zum HWS der Stadt D{\"o}beln / Freiberger Mulde},
  doi       = {10.25643/bauhaus-universitaet.792},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7922},
  year      = {2006},
  abstract  = {Die Arbeit beinhaltet die Planungsgrundlage (Modellgesetze)und Herstellung (Modellbau) eines physikalischen Modells eines Flußabschnittes in den Grenzen seiner hydraulischen Wirkung. Ziel der Untersuchungen ist die Ert{\"u}chtigung derim Modell dargestellten Hochwasserschutzanlagen unter vorgegebenen Auflagen. Es werden Modelluntersuchungen durchgef{\"u}hrt, die zur Erfassung der Wasserst{\"a}nde bei verschiedenen Durchfl{\"u}ssen dienen. Die daf{\"u}r eingesetzte Messtechnik wird dokumentiert. Die Messdaten werden hinsichtlich Messgenauigkeit und Messfehlerbehaftung untersucht, um die Ergebnisse im Vergleich mit einem numerischen Modell aufzubereiten.},
  subject      = {Hochwasserschutz},
  language  = {de}
}
@inproceedings{Geyer,
  author    = {Geyer, Philipp},
  title     = {MODELS FOR MULTIDISCIPLINARY DESIGN OPTIMIZATION: AN EXEMPLARY OFFICE BUILDING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2957},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29574},
  pages     = {10},
  abstract  = {The mathematical and technical foundations of optimization have been developed to a large extent. In the design of buildings, however, optimization is rarely applied because of insufficient adaptation of this method to the needs of building design. The use of design optimization requires the consideration of all relevant objectives in an interactive and multidisciplinary process. Disciplines such as structural, light, and thermal engineering, architecture, and economics impose various objectives on the design. A good solution calls for a compromise between these often contradictory objectives. This presentation outlines a method for the application of Multidisciplinary Design Optimization (MDO) as a tool for the designing of buildings. An optimization model is established considering the fact that in building design the non-numerical aspects are of major importance than in other engineering disciplines. A component-based decomposition enables the designer to manage the non-numerical aspects in an interactive design optimization process. A fa{\c{c}}ade example demonstrates a way how the different disciplines interact and how the components integrate the disciplines in one optimization model. In this grid-based fa{\c{c}}ade example, the materials switch between a discrete number of materials and construction types. For light and thermal engineering, architecture, and economics, analysis functions calculate the performance; utility functions serve as an important means for the evaluation since not every increase or decrease of a physical value improves the design. For experimental purposes, a genetic algorithm applied to the exemplary model demonstrates the use of optimization in this design case. A component-based representation first serves to manage non-numerical characteristics such as aesthetics. Furthermore, it complies with usual fabrication methods in building design and with object-oriented data handling in CAD. Therefore, components provide an important basis for an interactive MDO process in building design.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SeylerSchwarz,
  author    = {Seyler, Steve and Schwarz, W.},
  title     = {MODERN PHOTOGRAMMETRY IN CIVIL ENGINEERING - EXAMPLES FOR MONITORING AND EVALUATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3019},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30192},
  pages     = {13},
  abstract  = {Monitoring und Bewertung sind Hauptaufgaben im Management bzw. der Revitalisierung von Bauwerken. Unterschiedliche Verfahren k{\"o}nnen bei der Akquisition der erforderlichen geometrischen Information, wie z. B. Gr{\"o}ße oder Verformung eines Geb{\"a}udes, eingesetzt werden. Da das Potenzial der digitalen Fotografie kontinuierlich w{\"a}chst, stellt die Industriephotogrammetrie heute eine bedeutende Alternative zu den klassischen Verfahren wie Dehnmessstreifen oder anderen taktilen Sensoren dar. Moderne Industriephotogrammetrie erfasst die Bilder mittels digitaler Systeme. Dies bedeutet, dass die Information digitaler Bilder mit Hilfe der digitalen Bildverarbeitung untersucht werden muss, um die Bildkoordinaten der Messpunkte zu erhalten. Eine der Aufgaben der Bildverarbeitung f{\"u}r photogrammetrische Zwecke besteht somit darin, den Mittelpunkt von kreisf{\"o}rmigen Marken zu lokalisieren. Die modernen Operatoren liefern Subpixelgenauigkeit f{\"u}r die Koordinaten des Punktes. Das optische Messverfahren der Industriephotogrammetrie erfordert hinsichtlich der Hardware in erster Linie hochaufl{\"o}sende digitale Kameras. Dabei lassen sich die Kameras in Videokameras, HighSpeed-Kameras, intelligente Kameras sowie so genannte Consumer und Professionelle Kameras unterscheiden. Die geometrische Aufl{\"o}sung digitaler HighEnd-Kameras liegt heute bei {\"u}ber 10 Megapixel. In punkto Datentransfer zum Rechner sind verschiedene Standards am Markt verf{\"u}gbar, z. B. USB2.0, GigE-Vision, CameraLink oder Firewire. Die Wahl des Standards h{\"a}ngt immer von der spezifischen Aufgabenstellung ab, da keine der Techniken eine f{\"u}hrende Position einnimmt. Die moderne Photogrammetrie bietet viele neue M{\"o}glichkeiten f{\"u}r das Monitoring und die Bewertung von Bauwerken. Sie kann ein-, zwei-, drei- oder vierdimensionale Informationen liefern, falls erforderlich auch in Echtzeit. Als ber{\"u}hrungsloses Messverfahren ist der Einsatz der Photogrammetrie noch m{\"o}glich, wenn die taktilen Sensoren z. B. aufgrund ihres Platzbedarfes nicht mehr eingesetzt werden k{\"o}nnen. Hochaufl{\"o}sende Videokameras erlauben es, selbst dynamische Untersuchungen mit großer Pr{\"a}zision durchzuf{\"u}hren.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Traversoni,
  author    = {Traversoni, Leonardo},
  title     = {MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3027},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30274},
  pages     = {8},
  abstract  = {We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic {\O}lms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{HaefnerKoenke,
  author    = {H{\"a}fner, Stefan and K{\"o}nke, Carsten},
  title     = {MULTIGRID PRECONDITIONED CONJUGATE GRADIENT METHOD IN THE MECHANICAL ANALYSIS OF HETEROGENEOUS SOLIDS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2962},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29626},
  pages     = {29},
  abstract  = {A fast solver method called the multigrid preconditioned conjugate gradient method is proposed for the mechanical analysis of heterogeneous materials on the mesoscale. Even small samples of a heterogeneous material such as concrete show a complex geometry of different phases. These materials can be modelled by projection onto a uniform, orthogonal grid of elements. As one major problem the possible resolution of the concrete specimen is generally restricted due to (a) computation times and even more critical (b) memory demand. Iterative solvers can be based on a local element-based formulation while orthogonal grids consist of geometrical identical elements. The element-based formulation is short and transparent, and therefore efficient in implementation. A variation of the material properties in elements or integration points is possible. The multigrid method is a fast iterative solver method, where ideally the computational effort only increases linear with problem size. This is an optimal property which is almost reached in the implementation presented here. In fact no other method is known which scales better than linear. Therefore the multigrid method gains in importance the larger the problem becomes. But for heterogeneous models with very large ratios of Young's moduli the multigrid method considerably slows down by a constant factor. Such large ratios occur in certain heterogeneous solids, as well as in the damage analysis of solids. As solution to this problem the multigrid preconditioned conjugate gradient method is proposed. A benchmark highlights the multigrid preconditioned conjugate gradient method as the method of choice for very large ratio's of Young's modulus. A proposed modified multigrid cycle shows good results, in the application as stand-alone solver or as preconditioner.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MelnikovSemenov,
  author    = {Melnikov, B. E. and Semenov, Artem},
  title     = {MULTILEVEL COMPUTATION IN CIVIL ENGINEERING BASED ON MULTIMODEL ELASTO-PLASTIC ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2991},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29911},
  pages     = {11},
  abstract  = {Requires for reliability and durability of structures and their elements with simultaneous material economy have stimulated improvement of constitutive equations for description of elasto-plastic deformation processes. This has led to the development of phenomenological modelling of complex phenomena of irreversible deformation including history-dependent and rate-dependent effects. During the last several decades many works have been devoted to the development of elasto-plastic models, in order to better predict the material behavior under combined variable thermo-mechanical loading. The increase of accuracy of stress analysis and safety factors for complex structures with the help of modern finite-element packages (ABAQUS, ANSYS, COSMOS, LS-DYNA, MSC.MARC, MSC.NASTRAN, PERMAS and other) can be provided only by use of complex and special variants of plasticity theories, which are adequate for the considered loading conditions and based on authentic information about properties of materials. The areas of application of the various theories (models) are as a rule unknown to the users of finite-element packages at the existing variety loading condition sin machine-building designs. At the moment a universal theory of inelasticity is absent and even the most accomplished theories can not guarantee adequate description of deformation processes for arbitrary structure under wide range of loading programs. The classifier of materials, loading conditions, effects (phenomena) and list of basic experiments are developed by the authors. Use of these classifiers for an establishment of hierarchy of models is a first step for introduction of the multimodel analysis into computational practice. The set of the classic and modern inelasticity theories is considered, so that they are applicable for stress analysis of structures under complex loading programs. Among them there are plastic flow theories with linear and nonlinear isotropic and kinematic hardening, multisurface theories, endochronic theory, holonomic theory, rheologic models, theory of elasto-plastic processes, slip theory, physical theories (single crystal and polycrystalline models) and others. The classification of materials provides rearranging by a degree of homogeneous, chemical composition, level of strength and plasticity, behavior under cyclic loading, anisotropy of properties at initial condition, anisotropy of properties during deformation process, structural stability. The classification of loading conditions takes into consideration proportional and non-proportional loading, temperature range, combination of cyclic and monotonous loading, one-axial, two-axial and complex stress state, curvature of strain path, presence of stress concentrators and level of strain gradient. A unified general form of constitutive equations is presented for all used material models based upon the concept of internal state variables. The wide range of mentioned above inelastic material models has been implemented into finite element program PANTOCRATOR developed by authors (see for details www.pantocrator.narod.ru). Application possibility of different material models is considered both for material element and for complex structures subjected to complex non-proportional loading.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}