@phdthesis{Abbas, author = {Abbas, Tajammal}, title = {Assessment of Numerical Prediction Models for Aeroelastic Instabilities of Bridges}, publisher = {Jonas Verlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.2716}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180515-27161}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {275}, abstract = {The phenomenon of aerodynamic instability caused by the wind is usually a major design criterion for long-span cable-supported bridges. If the wind speed exceeds the critical flutter speed of the bridge, this constitutes an Ultimate Limit State. The prediction of the flutter boundary, therefore, requires accurate and robust models. The complexity and uncertainty of models for such engineering problems demand strategies for model assessment. This study is an attempt to use the concepts of sensitivity and uncertainty analyses to assess the aeroelastic instability prediction models for long-span bridges. The state-of-the-art theory concerning the determination of the flutter stability limit is presented. Since flutter is a coupling of aerodynamic forcing with a structural dynamics problem, different types and classes of structural and aerodynamic models can be combined to study the interaction. Here, both numerical approaches and analytical models are utilised and coupled in different ways to assess the prediction quality of the coupled model.}, subject = {Br{\"u}cke}, language = {en} } @phdthesis{Abeltshauser, author = {Abeltshauser, Rainer}, title = {Identification and separation of physical effects of coupled systems by using defined model abstractions}, doi = {10.25643/bauhaus-universitaet.2860}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28600}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The thesis investigates at the computer aided simulation process for operational vibration analysis of complex coupled systems. As part of the internal methods project "Absolute Values" of the BMW Group, the thesis deals with the analysis of the structural dynamic interactions and excitation interactions. The overarching aim of the methods project is to predict the operational vibrations of engines. Simulations are usually used to analyze technical aspects (e. g. operational vibrations, strength, ...) of single components in the industrial development. The boundary conditions of submodels are mostly based on experiences. So the interactions with neighboring components and systems are neglected. To get physically more realistic results but still efficient simulations, this work wants to support the engineer during the preprocessing phase by useful criteria. At first suitable abstraction levels based on the existing literature are defined to identify structural dynamic interactions and excitation interactions of coupled systems. So it is possible to separate different effects of the coupled subsystems. On this basis, criteria are derived to assess the influence of interactions between the considered systems. These criteria can be used during the preprocessing phase and help the engineer to build up efficient models with respect to the interactions with neighboring systems. The method was developed by using several models with different complexity levels. Furthermore, the method is proved for the application in the industrial environment by using the example of a current combustion engine.}, subject = {Strukturdynamik}, language = {en} } @phdthesis{AbuBakar, author = {Abu Bakar, Ilyani Akmar}, title = {Computational Analysis of Woven Fabric Composites: Single- and Multi-Objective Optimizations and Sensitivity Analysis in Meso-scale Structures}, issn = {1610-7381}, doi = {10.25643/bauhaus-universitaet.4176}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200605-41762}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {151}, abstract = {This study permits a reliability analysis to solve the mechanical behaviour issues existing in the current structural design of fabric structures. Purely predictive material models are highly desirable to facilitate an optimized design scheme and to significantly reduce time and cost at the design stage, such as experimental characterization. The present study examined the role of three major tasks; a) single-objective optimization, b) sensitivity analyses and c) multi-objective optimization on proposed weave structures for woven fabric composites. For single-objective optimization task, the first goal is to optimize the elastic properties of proposed complex weave structure under unit cells basis based on periodic boundary conditions. We predict the geometric characteristics towards skewness of woven fabric composites via Evolutionary Algorithm (EA) and a parametric study. We also demonstrate the effect of complex weave structures on the fray tendency in woven fabric composites via tightness evaluation. We utilize a procedure which does not require a numerical averaging process for evaluating the elastic properties of woven fabric composites. The fray tendency and skewness of woven fabrics depends upon the behaviour of the floats which is related to the factor of weave. Results of this study may suggest a broader view for further research into the effects of complex weave structures or may provide an alternative to the fray and skewness problems of current weave structure in woven fabric composites. A comprehensive study is developed on the complex weave structure model which adopts the dry woven fabric of the most potential pattern in singleobjective optimization incorporating the uncertainties parameters of woven fabric composites. The comprehensive study covers the regression-based and variance-based sensitivity analyses. The second task goal is to introduce the fabric uncertainties parameters and elaborate how they can be incorporated into finite element models on macroscopic material parameters such as elastic modulus and shear modulus of dry woven fabric subjected to uni-axial and biaxial deformations. Significant correlations in the study, would indicate the need for a thorough investigation of woven fabric composites under uncertainties parameters. The study describes here could serve as an alternative to identify effective material properties without prolonged time consumption and expensive experimental tests. The last part focuses on a hierarchical stochastic multi-scale optimization approach (fine-scale and coarse-scale optimizations) under geometrical uncertainties parameters for hybrid composites considering complex weave structure. The fine-scale optimization is to determine the best lamina pattern that maximizes its macroscopic elastic properties, conducted by EA under the following uncertain mesoscopic parameters: yarn spacing, yarn height, yarn width and misalignment of yarn angle. The coarse-scale optimization has been carried out to optimize the stacking sequences of symmetric hybrid laminated composite plate with uncertain mesoscopic parameters by employing the Ant Colony Algorithm (ACO). The objective functions of the coarse-scale optimization are to minimize the cost (C) and weight (W) of the hybrid laminated composite plate considering the fundamental frequency and the buckling load factor as the design constraints. Based on the uncertainty criteria of the design parameters, the appropriate variation required for the structural design standards can be evaluated using the reliability tool, and then an optimized design decision in consideration of cost can be subsequently determined.}, subject = {Verbundwerkstoff}, language = {en} } @phdthesis{Achenbach, author = {Achenbach, Marcus}, title = {Weiterentwicklung der Zonenmethode f{\"u}r den Nachweis der Feuerwiderstandsdauer von rechteckigen Stahlbetondruckgliedern}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-264-4}, doi = {10.25643/bauhaus-universitaet.3848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190119-38484}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {174}, abstract = {Die Zonenmethode nach Hertz ist ein vereinfachtes Verfahren zur Heißbemessung von Stahlbetonbauteilen. Um eine h{\"a}ndische Bemessung zu erm{\"o}glichen, werden daher verschiedene Annahmen und Vereinfachungen getroffen. Insbesondere werden die thermischen Dehnungen vernachl{\"a}ssigt und das mechanische Verhalten durch einen verkleinerten Querschnitt mit konstanten Stoffeigenschaften beschrieben. Ziel der vorliegenden Arbeit ist, dieses vereinfachte Verfahren in ein nichtlineares Verfahren zur Heißbemessung von Stahlbetondruckgliedern bei Brandbeanspruchung durch die Einheits-Temperaturzeitkurve zu {\"u}berf{\"u}hren. Dazu werden die wesentlichen Annahmen der Zonenmethode {\"u}berpr{\"u}ft und ein Vorschlag zur Weiterentwicklung vorgestellt. Dieser beruht im Wesentlichen auf der Modellierung der druckbeanspruchten Bewehrung. Diese weiterentwickelte Zonenmethode wird durch die Nachrechnung von Laborversuchen validiert und das Sicherheitsniveau durch eine vollprobabilistische Analyse und den Vergleich mit dem allgemeinen Verfahren bestimmt.}, subject = {Bautechnik}, language = {de} } @phdthesis{Adami2004, author = {Adami, Kay}, title = {Beitrag zur physikalisch nichtlinearen Analyse von Aussteifungssystemen mit Methoden der mathematischen Optimierung}, doi = {10.25643/bauhaus-universitaet.78}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040329-812}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2004}, abstract = {Das Ziel der vorliegenden Arbeit besteht in der Entwicklung einer Strategie zur physikalisch nichtlinearen Analyse von Aussteifungssystemen. Der Anwendungsschwerpunkt umfasst neben dem traditionellen Aufgabenumfang zur Analyse neu zu errichtender Tragwerke gleichzeitig auch Planungsaufgaben, die mit Umbau- und Sanierungsmaßnahmen verbunden sind. Ver{\"a}nderungen, die sich w{\"a}hrend der Nutzungsgeschichte oder im Revitalisierungsprozess ergeben, werden in den Berechnungsmodellen ber{\"u}cksichtigt. In vielen F{\"a}llen ist es aus planerischer Sicht zweckm{\"a}ßig, die Nichtlinearit{\"a}t des Materialverhaltens zur Erschließung von Tragreserven in den normativen Nachweiskonzepten mit einzubeziehen. Der damit verbundene numerische Aufwand wird durch die Verwendung separater Modelle zur Erfassung des Querschnitts- und des Systemtragverhaltens begrenzt, ohne die Komplexit{\"a}t der Aufgabenstellung zu reduzieren. Aus detaillierten Querschnittsuntersuchungen der Tragw{\"a}nde werden integrale Materialbeziehungen abgeleitet, welche die Grundlage f{\"u}r die nichtlineare Tragwerksanalyse darstellen. Die Modellbildung gegliederter Aussteifungsw{\"a}nde basiert auf deren Zerlegung in ebene finite Stabsegmente, die sich durch die Diskretisierung in L{\"a}ngs- und in Querrichtung ergeben. Zus{\"a}tzlich zu den an den Stabenden angreifenden Normalkr{\"a}ften, Querkr{\"a}ften und Biegemomenten werden an den Elementl{\"a}ngsr{\"a}ndern Schubbeanspruchungen erfasst. Die physikalische Nichtlinearit{\"a}t wird durch die Einbeziehung integraler Materialbeziehungen an den Segmentr{\"a}ndern ber{\"u}cksichtigt. Die numerische Umsetzung erfolgt mit Methoden der mathematischen Optimierung. Die Leistungsf{\"a}higkeit der Berechnungsstrategie wird exemplarisch anhand von Untersuchungen an Aussteifungssystemen in Großtafelbauweise nachgewiesen.}, subject = {Stahlbeton}, language = {de} } @phdthesis{Ahmad, author = {Ahmad, Sofyan}, title = {Reference Surface-Based System Identification}, doi = {10.25643/bauhaus-universitaet.2113}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140205-21132}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {153}, abstract = {Environmental and operational variables and their impact on structural responses have been acknowledged as one of the most important challenges for the application of the ambient vibration-based damage identification in structures. The damage detection procedures may yield poor results, if the impacts of loading and environmental conditions of the structures are not considered. The reference-surface-based method, which is proposed in this thesis, is addressed to overcome this problem. In the proposed method, meta-models are used to take into account significant effects of the environmental and operational variables. The usage of the approximation models, allows the proposed method to simply handle multiple non-damaged variable effects simultaneously, which for other methods seems to be very complex. The input of the meta-model are the multiple non-damaged variables while the output is a damage indicator. The reference-surface-based method diminishes the effect of the non-damaged variables to the vibration based damage detection results. Hence, the structure condition that is assessed by using ambient vibration data at any time would be more reliable. Immediate reliable information regarding the structure condition is required to quickly respond to the event, by means to take necessary actions concerning the future use or further investigation of the structures, for instance shortly after extreme events such as earthquakes. The critical part of the proposed damage detection method is the learning phase, where the meta-models are trained by using input-output relation of observation data. Significant problems that may encounter during the learning phase are outlined and some remedies to overcome the problems are suggested. The proposed damage identification method is applied to numerical and experimental models. In addition to the natural frequencies, wavelet energy and stochastic subspace damage indicators are used.}, subject = {System Identification}, language = {en} } @phdthesis{AhmedElSayed2003, author = {Ahmed El-Sayed, Ahmed Mohammed}, title = {One some classes and spaces of holomorphic and hyperholomorphic functions}, doi = {10.25643/bauhaus-universitaet.25}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040216-271}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2003}, abstract = {In this Thesis we study some complex and hypercomplex function spaces and classes such as hypercomplex Besov spaces, Bloch space and Op spaces as well as the class of basic sets of polynomials in several complex variables. It is shown that hyperholomorphic Besov spaces can be applied to characterize the hyperholomorphic Bloch space. Moreover, we consider BMOM and VMOM spaces.}, subject = {Funktionenraum}, language = {en} } @phdthesis{Ailland, author = {Ailland, Karin}, title = {Ereignisbasierte Abbildung von Bau-Ist-Zust{\"a}nden}, publisher = {Verlag der Bauhaus-Universit{\"a}t Weimar}, address = {Weimar}, isbn = {978-3-86068-508-2}, doi = {10.25643/bauhaus-universitaet.2065}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20131029-20651}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {220}, abstract = {Der Komplexit{\"a}t einer großen Baumaßnahme steht meist ein relativ unpr{\"a}zises Termincontrolling gegen{\"u}ber. Die Gr{\"u}nde daf{\"u}r liegen in unzureichenden Baufortschrittsinformationen und der Schwierigkeit, eine geeignete Steuerungsmaßnahme auszuw{\"a}hlen. In der Folge kommt es h{\"a}ufig zu Terminverz{\"u}gen und Mehrkosten. Ziel der Arbeit war es, die realen Bau-Ist-Zust{\"a}nde eines Bauprojektes so genau zu erfassen, dass es m{\"o}glich wird, t{\"a}glich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes zu schaffen und mit Hilfe eines Simulationswerkzeuges nachzubilden. Zu diesem Zweck sollte ein Erfassungskonzept ausgearbeitet werden, mit dessen Hilfe unter Verwendung von Erfassungstechniken aussagekr{\"a}ftige sowie belastbare Daten zu einer auf die Anforderungen der Simulation abgestimmten Datenbasis zusammengef{\"u}hrt werden. Um der Zielstellung gerecht zu werden, wurde anhand eines Beispiels ein Prozessmodell aufgebaut und definiert, welche Informationen zum Aufbau eines Simulationsmodells, das die reaktive Ablaufplanung unterst{\"u}tzt, erfasst werden m{\"u}ssen. Die einzelnen Prozessgr{\"o}ßen wurden detailliert beschrieben und die Erfassungsgr{\"o}ßen daraus abgeleitet. Weiterhin wurden Aussagen zur Prozessstrukturierung erarbeitet. Somit wurden Informationsst{\"u}tzstellen definiert. Es wurden Methoden zur Erfassung des Bau-Ist-Zustandes hinsichtlich ihrer Eignung sowie Anwendungsm{\"o}glichkeiten analysiert und ausgew{\"a}hlte Anwendungsbeispiele f{\"u}r RFID, Barcodes und Bautageb{\"u}cher dargestellt. Außerdem wurde betrachtet, welche Daten der baustelleneigenen Bauablaufdokumentation zur Belegung der Informationsst{\"u}tzstellen genutzt werden k{\"o}nnen. Diese Betrachtung stellte Dokumente in den Fokus, welche aufgrund von Vorschriften oder Vertragsbedingungen ohnehin auf Baustellen erfasst werden m{\"u}ssen. Schließlich wurden die vorangegangenen Betrachtungen hinsichtlich der Erfassungsgr{\"o}ßen und der Erfassungsmethoden in einem Erfassungskonzept zusammengef{\"u}hrt und eine geeignete Kombination von Erfassungsmethoden entwickelt. Der Baufortschritt soll anhand der Beschreibung, welchen Status die einzelnen Vorg{\"a}nge angenommen haben, mit Hilfe eines digitalen Bautagebuchs erfasst werden. Die Randbedingungen, wie die Verf{\"u}gbarkeit von Personal-, Material- und Ger{\"a}teressourcen, werden mit Hilfe von RFID-Tags identifiziert, auf denen alle weiteren ben{\"o}tigten Informationen hinterlegt sind. Informationen {\"u}ber Ressourcen, welche geplante Termine wiedergeben, m{\"u}ssen ebenfalls im digitalen Bautagebuch hinterlegt und aktuell gehalten werden. Traditionelle Lieferscheine in Papierform m{\"u}ssen durch digitale Lieferscheine ersetzt werden. Abgeschlossen wurde die Ausarbeitung des Erfassungskonzeptes durch Ans{\"a}tze, mit deren Hilfe der Erfassungsaufwand reduziert werden kann. Zu diesem Zweck wurde eine hierarchische Ordnung des Erfassungskonzeptes eingef{\"u}hrt. Im Ergebnis ist somit ein Erfassungskonzept entstanden, mit dessen Hilfe die realen Bau-Ist-Zust{\"a}nde einer Baumaßnahme so genau erfasst werden k{\"o}nnen, dass t{\"a}glich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes in einer Simulations¬umgebung generiert werden kann. Die Erfassungskonzeption liefert eine Datenbasis, die auf die Anforderungen der Simulation abgestimmt ist.}, subject = {Simulation}, language = {de} } @phdthesis{Ajjour, author = {Ajjour, Yamen}, title = {Addressing Controversial Topics in Search Engines}, doi = {10.25643/bauhaus-universitaet.6403}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230626-64037}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {133}, abstract = {Search engines are very good at answering queries that look for facts. Still, information needs that concern forming opinions on a controversial topic or making a decision remain a challenge for search engines. Since they are optimized to retrieve satisfying answers, search engines might emphasize a specific stance on a controversial topic in their ranking, amplifying bias in society in an undesired way. Argument retrieval systems support users in forming opinions about controversial topics by retrieving arguments for a given query. In this thesis, we address challenges in argument retrieval systems that concern integrating them in search engines, developing generalizable argument mining approaches, and enabling frame-guided delivery of arguments. Adapting argument retrieval systems to search engines should start by identifying and analyzing information needs that look for arguments. To identify questions that look for arguments we develop a two-step annotation scheme that first identifies whether the context of a question is controversial, and if so, assigns it one of several question types: factual, method, and argumentative. Using this annotation scheme, we create a question dataset from the logs of a major search engine and use it to analyze the characteristics of argumentative questions. The analysis shows that the proportion of argumentative questions on controversial topics is substantial and that they mainly ask for reasons and predictions. The dataset is further used to develop a classifier to uniquely map questions to the question types, reaching a convincing F1-score of 0.78. While the web offers an invaluable source of argumentative content to respond to argumentative questions, it is characterized by multiple genres (e.g., news articles and social fora). Exploiting the web as a source of arguments relies on developing argument mining approaches that generalize over genre. To this end, we approach the problem of how to extract argument units in a genre-robust way. Our experiments on argument unit segmentation show that transfer across genres is rather hard to achieve using existing sequence-to-sequence models. Another property of text which argument mining approaches should generalize over is topic. Since new topics appear daily on which argument mining approaches are not trained, argument mining approaches should be developed in a topic-generalizable way. Towards this goal, we analyze the coverage of 31 argument corpora across topics using three topic ontologies. The analysis shows that the topics covered by existing argument corpora are biased toward a small subset of easily accessible controversial topics, hinting at the inability of existing approaches to generalize across topics. In addition to corpus construction standards, fostering topic generalizability requires a careful formulation of argument mining tasks. Same side stance classification is a reformulation of stance classification that makes it less dependent on the topic. First experiments on this task show promising results in generalizing across topics. To be effective at persuading their audience, users of an argument retrieval system should select arguments from the retrieved results based on what frame they emphasize of a controversial topic. An open challenge is to develop an approach to identify the frames of an argument. To this end, we define a frame as a subset of arguments that share an aspect. We operationalize this model via an approach that identifies and removes the topic of arguments before clustering them into frames. We evaluate the approach on a dataset that covers 12,326 frames and show that identifying the topic of an argument and removing it helps to identify its frames.}, subject = {Informatik}, language = {en} } @phdthesis{AlKhatib2021, author = {Al Khatib, Khalid}, title = {Computational Analysis of Argumentation Strategies}, doi = {10.25643/bauhaus-universitaet.4461}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210719-44612}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {134}, year = {2021}, abstract = {The computational analysis of argumentation strategies is substantial for many downstream applications. It is required for nearly all kinds of text synthesis, writing assistance, and dialogue-management tools. While various tasks have been tackled in the area of computational argumentation, such as argumentation mining and quality assessment, the task of the computational analysis of argumentation strategies in texts has so far been overlooked. This thesis principally approaches the analysis of the strategies manifested in the persuasive argumentative discourses that aim for persuasion as well as in the deliberative argumentative discourses that aim for consensus. To this end, the thesis presents a novel view of argumentation strategies for the above two goals. Based on this view, new models for pragmatic and stylistic argument attributes are proposed, new methods for the identification of the modelled attributes have been developed, and a new set of strategy principles in texts according to the identified attributes is presented and explored. Overall, the thesis contributes to the theory, data, method, and evaluation aspects of the analysis of argumentation strategies. The models, methods, and principles developed and explored in this thesis can be regarded as essential for promoting the applications mentioned above, among others.}, subject = {Argumentation}, language = {en} } @phdthesis{AlYasiri2017, author = {Al-Yasiri, Zainab Riyadh Shaker}, title = {Function Theoretic Methods for the Analytical and Numerical Solution of Some Non-linear Boundary Value Problems with Singularities}, doi = {10.25643/bauhaus-universitaet.3898}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190506-38987}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {164}, year = {2017}, abstract = {The p-Laplace equation is a nonlinear generalization of the well-known Laplace equation. It is often used as a model problem for special types of nonlinearities, and therefore it can be seen as a bridge between very general nonlinear equations and the linear Laplace equation, too. It appears in many problems for instance in the theory of non-Newtonian fluids and fluid dynamics or in rockfill dam problems, as well as in special problems of image restoration and image processing. The aim of this thesis is to solve the p-Laplace equation for 1 < p < 2, as well as for 2 < p < 3 and to find strong solutions in the framework of Clifford analysis. The idea is to apply a hypercomplex integral operator and special function theoretic methods to transform the p-Laplace equation into a p-Dirac equation. We consider boundary value problems for the p-Laplace equation and transfer them to boundary value problems for a p-Dirac equation. These equations will be solved iteratively by applying Banach's fixed-point principle. Applying operator-theoretical methods for the p-Dirac equation, the existence and uniqueness of solutions in certain Sobolev spaces will be proved. In addition, using a finite difference approach on a uniform lattice in the plane, the fundamental solution of the Cauchy-Riemann operator and its adjoint based on the fundamental solution of the Laplacian will be calculated. Besides, we define gener- alized discrete Teodorescu transform operators, which are right-inverse to the discrete Cauchy-Riemann operator and its adjoint in the plane. Furthermore, a new formula for generalized discrete boundary operators (analogues of the Cauchy integral operator) will be considered. Based on these operators a new version of discrete Borel-Pompeiu formula is formulated and proved. This is the basis for an operator calculus that will be applied to the numerical solution of the p-Dirac equation. Finally, numerical results will be presented showing advantages and problems of this approach.}, subject = {Finite-Differenzen-Methode}, language = {en} } @phdthesis{Alabdullah2010, author = {Alabdullah, Jamal}, title = {Testing Unsaturated Soil for Plane Strain Conditions : A New Double-Wall Biaxial Device}, doi = {10.25643/bauhaus-universitaet.1418}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100628-15056}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {In der vorliegenden Dissertation wird durch den Autor ein neuer, einzigartiger biaxialer Versuchsstand f{\"u}r die Untersuchung unges{\"a}ttigter B{\"o}den entwickelt und die an Proben von unges{\"a}ttigtem Sand gewonnenen Versuchsergebnisse vorgestellt. Im Wesentlichen werden die Versuche an Proben von Hostun-Sand-Proben durchgef{\"u}hrt. Die Versuchsreihen umfassen die Charakterisierung (Klassifizierung) des Bodens, die Ausarbeitung von Wasserretentionskennlinien (Soil Water Characteristic Curves) und die Durchf{\"u}hrung von biaxialen Kompressionsversuchen an trockenen, ges{\"a}ttigten und unges{\"a}ttigten Proben. Desweiteren werden Modellversuche an Streifenfundamenten zur Untersuchung der Tragf{\"a}higkeit durchgef{\"u}hrt. Begr{\"u}ndet durch die Ver{\"a}nderung des Bodenverhaltens durch geringe Anteile von bindigem Material, werden zus{\"a}tzlich Versuche mit einer Mischung aus Sand und Kaolinit analysiert.}, subject = {Unges{\"a}ttigte Zone}, language = {en} } @phdthesis{Alalade, author = {Alalade, Muyiwa}, title = {An Enhanced Full Waveform Inversion Method for the Structural Analysis of Dams}, doi = {10.25643/bauhaus-universitaet.3956}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190813-39566}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Since the Industrial Revolution in the 1700s, the high emission of gaseous wastes into the atmosphere from the usage of fossil fuels has caused a general increase in temperatures globally. To combat the environmental imbalance, there is an increase in the demand for renewable energy sources. Dams play a major role in the generation of "green" energy. However, these structures require frequent and strict monitoring to ensure safe and efficient operation. To tackle the challenges faced in the application of convention dam monitoring techniques, this work proposes the inverse analysis of numerical models to identify damaged regions in the dam. Using a dynamic coupled hydro-mechanical Extended Finite Element Method (XFEM) model and a global optimization strategy, damage (crack) in the dam is identified. By employing seismic waves to probe the dam structure, a more detailed information on the distribution of heterogeneous materials and damaged regions are obtained by the application of the Full Waveform Inversion (FWI) method. The FWI is based on a local optimization strategy and thus it is highly dependent on the starting model. A variety of data acquisition setups are investigated, and an optimal setup is proposed. The effect of different starting models and noise in the measured data on the damage identification is considered. Combining the non-dependence of a starting model of the global optimization strategy based dynamic coupled hydro-mechanical XFEM method and the detailed output of the local optimization strategy based FWI method, an enhanced Full Waveform Inversion is proposed for the structural analysis of dams.}, subject = {Talsperre}, language = {en} } @phdthesis{Alexander, author = {Alexander, Anne}, title = {Quantitative Erfassung von Risiken und Simulation ihrer Auswirkungen auf den Verlauf eines Bauprojektes}, doi = {10.25643/bauhaus-universitaet.2051}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130927-20514}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {171}, abstract = {Das Bauwesen hat sich in den letzten Jahren durch die Globalisierung des Marktes verbunden mit einer verst{\"a}rkten Nutzung moderner Technologien stark gewandelt. Die Planung und die Durchf{\"u}hrung von Bauvorhaben werden zunehmend komplexer und sind mit erh{\"o}hten Risiken verbunden. Geld- und Zeitressourcen werden bei einem immer h{\"a}rter werdenden Konkurrenzkampf knapper. Das Projektmanagement stellt L{\"o}sungsans{\"a}tze bereit, um Bauvorhaben auch unter erschwerten Bedingungen und erh{\"o}hten Risiken erfolgreich zum Abschluss zu bringen. Dabei hat ein systematisches Risikomanagement beginnend bei der Projektentwicklung bis zum Projektabschluss eine f{\"u}r den Projekterfolg entscheidende Bedeutung. Ziel der Arbeit ist es, eine quantitative Risikoerfassung f{\"u}r Projektmanager als professionelle Bauherrenvertretung und die Simulation der Risikoauswirkungen auf den Verlauf eines Projektes w{\"a}hrend der Planungs- und Bauphase zu erm{\"o}glichen. Mit Hilfe eines abstrakten Modells soll eine differenzierte, praxisnahe Simulation durchf{\"u}hrbar sein, die die verschiedenen Arten der Leistungs- und Kostenentstehung widerspiegelt. Parallel dazu soll die Beschreibung von Risiken so abstrahiert werden, dass beliebige Risiken quantitativ erfassbar und anschließend ihre Auswirkungen inklusive m{\"o}gliche Gegenmaßnahmen in das Modell integrierbar sind. Anhand zweier Beispiele werden die unterschiedlichen Einsatzm{\"o}glichkeiten der quantitativen Erfassung von Projektrisiken und der anschließenden Simulation ihrer Auswirkungen aufgezeigt. Bei dem ersten Beispiel, einem realen, bereits abgeschlossenen Schieneninfrastrukturprojekt, wird die Wirksamkeit einer vorbeugenden Maßnahme gegen ein Projektrisiko untersucht. Im zweiten Beispiel wird ein Planspielansatz zur praxisnahen Aus- und Weiterbildung von Projektmanagern entwickelt. Inhalt des Planspiels ist die Planung und Errichtung eines privatfinanzierten, {\"o}ffentlichen Repr{\"a}sentationsbaus mit teilweiser Fremdnutzung.}, subject = {Risiko}, language = {de} } @phdthesis{Alkam, author = {Alkam, Feras}, title = {Vibration-based Monitoring of Concrete Catenary Poles using Bayesian Inference}, volume = {2021}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4433}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210526-44338}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {177}, abstract = {This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level.}, subject = {Parameteridentifikation}, language = {en} } @phdthesis{Alt2000, author = {Alt, Dieter von}, title = {Ausbruchverhalten von Porenbetonplatten bei randnaher Punktst{\"u}tzung}, doi = {10.25643/bauhaus-universitaet.56}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040310-591}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2000}, abstract = {Schwerpunkt dieser Arbeit ist die Untersuchung des Ausbruchverhaltens von unbewehrten Porenbetonplatten bei konzentrierter Lasteintragung in Randn{\"a}he. In der Praxis tritt diese Problematik bei Befestigungen oder Verankerungen auf, die eine punktuelle Beanspruchung bewirken. Hauptziel der durchgef{\"u}hrten experimentellen und numerischen Untersuchungen war das Erkennen von Gesetzm{\"a}ßigkeiten f{\"u}r Versagenserscheinungen und f{\"u}r Bruchlasten in Abh{\"a}ngigkeit von variierenden Geometrie- und Materialparametern. Dabei waren Gr{\"o}ße und Lage der Lasteinleitungsstelle sowie die Materialfestigkeit die wichtigsten Einflussfaktoren. Von besonderem Interesse war auch das spr{\"o}de Verhalten des Porenbetonmaterials auf das Ausbruchverhalten. Die Arbeit gliedert sich in drei Hauptteile: die Experimente mit anschließend weiterf{\"u}hrenden numerischen Untersuchungen, sowie Bemessungskonzepten mit Ausbruchgleichungen. Ein weiteres Kapitel behandelt die Zugfestigkeit von Porenbeton. Die Experimente wurde an f{\"u}r Wand- oder Deckenplatten originaldicken Versuchsk{\"o}rpern durchgef{\"u}hrt. Dabei waren die Lagerbedingungen so festgelegt, dass sich m{\"o}glichst ein ungest{\"o}rter Ausbruchk{\"o}rper ausbilden konnte. Numerische Spannungsuntersuchungen {\"u}ber eine r{\"a}umliche Idealisierung der Versuchsk{\"o}rper mit dem Finite- Element- Programmsystem ANSYS gaben Aufschl{\"u}sse {\"u}ber Ort und Gr{\"o}ße von bruchverursachenden Spannungen. Des weiteren wurden {\"u}ber die Versuchsergebnisse hinaus Berechnungen {\"u}ber den Einfluss von Variationen bei der Plattengeometrie durchgef{\"u}hrt. Es wurden Betrachtungen {\"u}ber die Zugfestigkeit als einen maßgebenden Faktor f{\"u}r das Ausbruchverhalten gef{\"u}hrt. Numerische Risssimulationen gaben Aufschluss {\"u}ber den Spannungszustand und den Ablauf der Rissentwicklung.}, subject = {Platte}, language = {de} } @phdthesis{Altenmueller2008, author = {Altenm{\"u}ller, Ulrike}, title = {Koulu - Schule auf Finnisch : Funktions-, Raum- und Gestaltungskonzepte f{\"u}r neue Schulen in Finnland}, doi = {10.25643/bauhaus-universitaet.1300}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080822-13866}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Beginnend mit einem historischen R{\"u}ckblick auf die Entwicklung des Schulbaus in Finnland sowie einen {\"U}berblick zu den rechtlichen und organisatorischen Rahmenbedingungen f{\"u}r den Schulbau, wird in der Untersuchung dargestellt, dass in Finnland ein traditioneller Grundkonsens dar{\"u}ber besteht, dass Bildung eine besonders wichtige gesellschaftliche Aufgabe darstellt und Art sowie Umfang ihrer Erf{\"u}llung von herausragender Bedeutung f{\"u}r die Zukunft des Landes ist. Daher wird dem Thema „Schule" nicht nur in der Theorie, sondern auch im praktischen Alltag ein ausgesprochen hoher Stellenwert beigemessen. Auch die Lernumgebung wird mit besonderer Sorgfalt gestaltet. Die Gestaltung zahlreicher finnischer Bildungsanstalten ist transparent und flexibel. Das Schulgeb{\"a}ude ist somit f{\"u}r zuk{\"u}nftige Anforderungen leicht adaptierbar. Zu diesem Zweck wird architektonische Vielfalt mit einem hohen Grad an Funktionalit{\"a}t verbunden, die gleichzeitig lokale Gegebenheiten und Bed{\"u}rfnisse ber{\"u}cksichtigt. Pr{\"a}gend f{\"u}r die Funktions-, Raum- und Gestaltungskonzepte sind insbesondere der Bauk{\"o}rper und seine Form, die Erschließung der Schule und die Raumfolge innerhalb des Geb{\"a}udes, die Raumfunktion und Nutzung einzelner Bereiche sowie ein hohes Maß an r{\"a}umlich-visueller Kommunikation und Transparenz, sowohl innerhalb der Klassencluster als auch zwischen unterschiedlichen Funktionsbereichen der Schulen. Diese Parameter wurden in der vorliegenden Studie anhand von zahlreichen Fallbeispielen eingehend untersucht und dokumentiert. Durch einen fr{\"u}hzeitig gef{\"u}hrten, intensiven Dialog zwischen Beh{\"o}rden, P{\"a}dagogen und Architekten sind r{\"a}umliche Konzepte entstanden, die das Erlernen von sozialen Kompetenzen, Teamf{\"a}higkeit und Gruppenarbeit unterst{\"u}tzen und f{\"o}rdern.}, subject = {Schule}, language = {de} } @phdthesis{Amiri, author = {Amiri, Fatemeh}, title = {Computational modelling of fracture with local maximum entropy approximations}, doi = {10.25643/bauhaus-universitaet.2631}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160719-26310}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {130}, abstract = {The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME) shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes near the crack such as blending or shifting. As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation. In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected pipes.}, language = {en} } @phdthesis{Anderka, author = {Anderka, Maik}, title = {Analyzing and Predicting Quality Flaws in User-generated Content: The Case of Wikipedia}, doi = {10.25643/bauhaus-universitaet.1977}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130709-19778}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Web applications that are based on user-generated content are often criticized for containing low-quality information; a popular example is the online encyclopedia Wikipedia. The major points of criticism pertain to the accuracy, neutrality, and reliability of information. The identification of low-quality information is an important task since for a huge number of people around the world it has become a habit to first visit Wikipedia in case of an information need. Existing research on quality assessment in Wikipedia either investigates only small samples of articles, or else deals with the classification of content into high-quality or low-quality. This thesis goes further, it targets the investigation of quality flaws, thus providing specific indications of the respects in which low-quality content needs improvement. The original contributions of this thesis, which relate to the fields of user-generated content analysis, data mining, and machine learning, can be summarized as follows: (1) We propose the investigation of quality flaws in Wikipedia based on user-defined cleanup tags. Cleanup tags are commonly used in the Wikipedia community to tag content that has some shortcomings. Our approach is based on the hypothesis that each cleanup tag defines a particular quality flaw. (2) We provide the first comprehensive breakdown of Wikipedia's quality flaw structure. We present a flaw organization schema, and we conduct an extensive exploratory data analysis which reveals (a) the flaws that actually exist, (b) the distribution of flaws in Wikipedia, and, (c) the extent of flawed content. (3) We present the first breakdown of Wikipedia's quality flaw evolution. We consider the entire history of the English Wikipedia from 2001 to 2012, which comprises more than 508 million page revisions, summing up to 7.9 TB. Our analysis reveals (a) how the incidence and the extent of flaws have evolved, and, (b) how the handling and the perception of flaws have changed over time. (4) We are the first who operationalize an algorithmic prediction of quality flaws in Wikipedia. We cast quality flaw prediction as a one-class classification problem, develop a tailored quality flaw model, and employ a dedicated one-class machine learning approach. A comprehensive evaluation based on human-labeled Wikipedia articles underlines the practical applicability of our approach.}, subject = {Data Mining}, language = {en} } @phdthesis{Arboleda, author = {Arboleda, Pablo}, title = {Reckoning with Incompiuto Siciliano: Unfinished Public Works as Modern Ruins and All which it Entails}, doi = {10.25643/bauhaus-universitaet.3265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170715-32656}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {150}, abstract = {Since the end of the 1950s, Italy has focused part of its modernization on the erection of public works. Due to corruption, mafia, and further malpractice, this form of development has occasionally failed, producing a high number of constructions that have remained unfinished for decades. In 2007, the group of artists Alterazioni Video constructed an informal survey in the form of an on-line tool open to public contributions, which revealed that there are 395 unfinished public works in Italy from which 156, approximately 39.5\%, are located in Sicily alone. In view of such a statistic, Alterazioni Video opted to coin the term 'Incompiuto Siciliano' - literally 'Sicilian Incompletion' - to refer to unfinished public works as a formal architectural style. This re-interpretation, which aims to convey the recovered dignity of these 'modern ruins', considers unfinished public works a type of heritage with the potential to represent the entirety of Italian society. Furthermore, it goes as far as to say an unfinished public work is 'Incompiuto Siciliano' despite being located in another of the Italian regions. This doctoral dissertation embraces the artists' argument to develop a complete study of Incompiuto Siciliano by embedding this architectural style/artistic project within the main debates on modern ruins at present. This is important because it is expected to contribute to the revalorization and eventual recommissioning of unfinished sites by validating Incompiuto Siciliano in the realm of academia. Furthermore, this work aspires to be a worthwhile source of information for future investigations dealing with cultural interpretations of incompletion in any other context - a not unreasonable goal considering how unfinished works are one of the key urban topics after the 2008 financial crisis. Hence, this doctoral dissertation uses Incompiuto Siciliano to discuss a different perspective in each of the five chapters and, though these can be read as independent contributions, the objective is that all chapters read together, form a clear, concise, continuous unit. And so it must be said this is not a dissertation about unfinished public works in Italy; this is a dissertation about Incompiuto Siciliano as an artistic response to unfinished public works in Italy - which clearly requires an interdisciplinary analysis involving Urban Studies, Cultural Geography, Contemporary Archaeology, Critical Heritage and Visual Arts.}, subject = {Kulturerbe}, language = {en} } @phdthesis{Arganaraz, author = {Arga{\~n}araz, Cecilia Magdalena}, title = {Tiempos imaginados y espacios {\´a}ridos: controversias en torno al agua en el Valle de Catamarca (siglos XIX-XX)}, doi = {10.25643/bauhaus-universitaet.4681}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220803-46817}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it. The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime - in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion. These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history.}, subject = {Anthologie}, language = {es} } @phdthesis{Arifin2008, author = {Arifin, Yulian Firmana}, title = {Thermo-hydro-mechanical behavior of compacted bentonite-sand mixtures: an experimental study}, doi = {10.25643/bauhaus-universitaet.852}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20081006-14288}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Heat, gas, and leachate are primary by-products of landfill processes in municipal solid waste landfills. In nuclear waste repository, temperature of the waste also raises due to radioactivity processes. Temperature increase in the repository induces hydro-mechanical processes of its sealing material. Moderate to high temperature is expected to be encountered in the field situation. In this thesis, a study on the thermo-hydro-mechanical behavior of compacted bentonite-sand mixtures which are among the materials proposed to be used as sealing material for landfills and hazardous waste repository is presented. Mixtures of a calcium-type bentonite, Calcigel, and quartz sand were used in this study. Series of tests including suction and swelling pressure measurement, drying-wetting under unconfined and confined conditions were conducted at a moderately high temperature. Tests at room temperature including basic and physico-chemical characterization, microstructure and fabric studies, and osmotic suction were conducted in order to provide insight into understanding the hydro-mechanical processes taking place in the bentonite. The experimental data obtained are presented and compared to the result of the previous tests for the same material performed by other researchers at room temperature. The changes in hydro-mechanical behavior due to elevated temperature were analyzed and discussed based on the suction components of soil which are influenced by temperature. At the end, conclusions concerning the temperature effects on the hydro-mechanical behavior of the materials are drawn and suggestions for future studies are made.}, subject = {Temperatur}, language = {en} } @phdthesis{Arkarapotiwong, author = {Arkarapotiwong, Piyadech}, title = {THE INVESTIGATION OF LIVING HERITAGE ATTRIBUTES IN LIVING HERITAGE SITES}, doi = {10.25643/bauhaus-universitaet.2408}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150619-24086}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {303}, abstract = {The conservation of living heritage sites is a highly complex process. Two factors need careful consideration in order to achieve a balance in the management of such sites: the conservation demands of conservation experts for built heritage and the needs of local people for development of their heritage living space. The complexity of factors involved make for an interesting study of living heritage, taken up by this research in its main case study of the town of Nan in Thailand. Research into the historical background of Nan and its cultural heritage reveals a living heritage site, which is both unique and diverse. Present day Nan was examined using a variety of analysis tools, which were applied to data from interviews, empirical data, field surveys, and documents, in order to better understand the nature of the living heritage site and changing trends over time. Luang Prabang in Lao PDR, a World Heritage site since 1995, was also selected as a further case study with which to compare Nan's potential World Heritage status from a point of view of changes to living heritage attributes. The outcomes of the research indicate the importance of the management of the sites, which can be at risk of losing balance by focusing on one aspect of heritage to the detriment of the other. The conservation perspective, if allowed to dominate, as in Luang Prabang, can cause irreparable damage to the social fabric, where the development needs of the town are not met. This research concludes that a balance of power amongst stakeholders in the collaborative networks managing such sites is vital to sustaining a balance of living heritage attributes.}, subject = {Kulturerbe}, language = {en} } @phdthesis{Arzmi, author = {Arzmi, Azmah}, title = {Reinterpreting Marzahn, Berlin \& Petržalka, Bratislava: From Process of State Socialist Utopia to Utopia of State Capitalist Process}, doi = {10.25643/bauhaus-universitaet.4392}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43927}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Housing estates were fundamentally conceived upon state socialist utopia ideas to provide standard housing for citizens. While former state socialist housing estates have been extensively researched in the field of architecture, urban and sociology studies, there is still a gap in identifying how production processes affect morphological changes during the post-socialist era. This thesis compares the processes in the production of the largest housing estates of Marzahn in GDR and Petržalka in Czechoslovakia from 1970 to 1989 through contextual analysis of primary and secondary sources, which include visual maps, diagrams from professional architecture and planning journals, government documents and textbooks, as well as academic journals, books and newspaper articles. Then it discusses how these processes inadvertently created conducive conditions affecting their development in the market economy after 1989. It then interprets the results through application of Actor-Network Theory and Historical Institutionalism, while conceptualising them through David Harvey's dialectical utopianism theory. Harvey (2000) delineates two types of utopia, one of spatial form and one of process. The former refers to materialised ideals in physical forms whereas the latter refers to the ongoing process of spatializing. The thesis aims to show how the production of Marzahn in GDR was more path dependent on policies established in 1950s and 1960s whereas Petržalka was a product of new Czechoslovakian policies in 1970s, changing aspects of the urban planning process, a manifestation of a more emphatic technocratic thinking on a wider scale. This ultimately influences the trajectories of development after 1989, showing more effects in Petržalka.}, subject = {Kulturerbe}, language = {en} } @phdthesis{Ashour, author = {Ashour, Mohammed}, title = {Electromechanics and Hydrodynamics of Single Vesicles and Vesicle Doublet Using Phase-Field Isogeometric Analysis}, doi = {10.25643/bauhaus-universitaet.6400}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230628-64003}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {175}, abstract = {Biomembranes are selectively permeable barriers that separate the internal components of the cell from its surroundings. They have remarkable mechanical behavior which is characterized by many phenomena, but most noticeably their fluid-like in-plane behavior and solid-like out-of-plane behavior. Vesicles have been studied in the context of discrete models, such as Molecular Dynamics, Monte Carlo methods, Dissipative Particle Dynamics, and Brownian Dynamics. Those methods, however, tend to have high computational costs, which limited their uses for studying atomistic details. In order to broaden the scope of this research, we resort to the continuum models, where the atomistic details of the vesicles are neglected, and the focus shifts to the overall morphological evolution. Under the umbrella of continuum models, vesicles morphology has been studied extensively. However, most of those studies were limited to the mechanical response of vesicles by considering only the bending energy and aiming for the solution by minimizing the total energy of the system. Most of the literature is divided between two geometrical representation methods; the sharp interface methods and the diffusive interface methods. Both of those methods track the boundaries and interfaces implicitly. In this research, we focus our attention on solving two non-trivial problems. In the first one, we study a constrained Willmore problem coupled with an electrical field, and in the second one, we investigate the hydrodynamics of a vesicle doublet suspended in an external viscous fluid flow. For the first problem, we solve a constrained Willmore problem coupled with an electrical field using isogeometric analysis to study the morphological evolution of vesicles subjected to static electrical fields. The model comprises two phases, the lipid bilayer, and the electrolyte. This two-phase problem is modeled using the phase-field method, which is a subclass of the diffusive interface methods mentioned earlier. The bending, flexoelectric, and dielectric energies of the model are reformulated using the phase-field parameter. A modified Augmented-Lagrangian (ALM) approach was used to satisfy the constraints while maintaining numerical stability and a relatively large time step. This approach guarantees the satisfaction of the constraints at each time step over the entire temporal domain. In the second problem, we study the hydrodynamics of vesicle doublet suspended in an external viscous fluid flow. Vesicles in this part of the research are also modeled using the phase-field model. The bending energy and energies associated with enforcing the global volume and area are considered. In addition, the local inextensibility condition is ensured by introducing an additional equation to the system. To prevent the vesicles from numerically overlapping, we deploy an interaction energy definition to maintain a short-range repulsion between the vesicles. The fluid flow is modeled using the incompressible Navier-Stokes equations and the vesicle evolution in time is modeled using two advection equations describing the process of advecting each vesicle by the fluid flow. To overcome the velocity-pressure saddle point system, we apply the Residual-Based Variational MultiScale (RBVMS) method to the Navier-Stokes equations and solve the coupled systems using isogeometric analysis. We study vesicle doublet hydrodynamics in shear flow, planar extensional flow, and parabolic flow under various configurations and boundary conditions. The results reveal several interesting points about the electrodynamics and hydrodynamics responses of single vesicles and vesicle doublets. But first, it can be seen that isogeometric analysis as a numerical tool has the ability to model and solve 4th-order PDEs in a primal variational framework at extreme efficiency and accuracy due to the abilities embedded within the NURBS functions without the need to reduce the order of the PDE by creating an intermediate environment. Refinement whether by knot insertion, order increasing or both is far easier to obtain than traditional mesh-based methods. Given the wide variety of phenomena in natural sciences and engineering that are mathematically modeled by high-order PDEs, the isogeometric analysis is among the most robust methods to address such problems as the basis functions can easily attain high global continuity. On the applicational side, we study the vesicle morphological evolution based on the electromechanical liquid-crystal model in 3D settings. This model describing the evolution of vesicles is composed of time-dependent, highly nonlinear, high-order PDEs, which are nontrivial to solve. Solving this problem requires robust numerical methods, such as isogeometric analysis. We concluded that the vesicle tends to deform under increasing magnitudes of electric fields from the original sphere shape to an oblate-like shape. This evolution is affected by many factors and requires fine-tuning of several parameters, mainly the regularization parameter which controls the thickness of the diffusive interface width. But it is most affected by the method used for enforcing the constraints. The penalty method in presence of an electrical field tends to lock on the initial phase-field and prevent any evolution while a modified version of the ALM has proven to be sufficiently stable and accurate to let the phase-field evolve while satisfying the constraints over time at each time step. We show additionally the effect of including the flexoelectric nature of the Biomembranes in the computation and how it affects the shape evolution as well as the effect of having different conductivity ratios. All the examples were solved based on a staggered scheme, which reduces the computational cost significantly. For the second part of the research, we consider vesicle doublet suspended in a shear flow, in a planar extensional flow, and in a parabolic flow. When the vesicle doublet is suspended in a shear flow, it can either slip past each other or slide on top of each other based on the value of the vertical displacement, that is the vertical distance between the center of masses between the two vesicles, and the velocity profile applied. When the vesicle doublet is suspended in a planar extensional flow in a configuration that resembles a junction, the time in which both vesicles separate depends largely on the value of the vertical displacement after displacing as much fluid from between the two vesicles. However, when the vesicles are suspended in a tubular channel with a parabolic fluid flow, they develop a parachute-like shape upon converging towards each other before exiting the computational domain from the predetermined outlets. This shape however is affected largely by the height of the tubular channel in which the vesicle is suspended. The velocity essential boundary conditions are imposed weakly and strongly. The weak implementation of the boundary conditions was used when the velocity profile was defined on the entire boundary, while the strong implementation was used when the velocity profile was defined on a part of the boundary. The strong implementation of the essential boundary conditions was done by selectively applying it to the predetermined set of elements in a parallel-based code. This allowed us to simulate vesicle hydrodynamics in a computational domain with multiple inlets and outlets. We also investigate the hydrodynamics of oblate-like shape vesicles in a parabolic flow. This work has been done in 2D configuration because of the immense computational load resulting from a large number of degrees of freedom, but we are actively seeking to expand it to 3D settings and test a broader set of parameters and geometrical configurations.}, subject = {Isogeometrische Analyse}, language = {en} } @phdthesis{Aurin, author = {Aurin, Ingo}, title = {Spurencodierung und Ber{\"u}hrungsmessung}, doi = {10.25643/bauhaus-universitaet.2397}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150526-23975}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {148}, abstract = {In der vorliegenden Ph.D.-Arbeit werden die Bereiche Materialit{\"a}t, Objektkultur und Physical Computing adressiert. Der Autor erkennt nun durch die durchlaufene intensive theoretische Betrachtungsweise des Themas Materialit{\"a}t die Bedeutung von Tastsinn und Objektoberfl{\"a}chen f{\"u}r den Alltag des praktizierenden Gestalters und proklamiert eine Wende und Hinwendung der Designpraxis zu den Potenzialen von Materialit{\"a}t und deren Bedeutung f{\"u}r die Akteure. Die Aufgabe der Praxisforschung ist es, eine inklusive Optimierungsmethode des Produktdesigns zu gestalten, mit der Designentwicklungen durch {\"u}berpr{\"u}fbare Nutzungsdaten optimiert werden k{\"o}nnen. Die taktile Pilotmethode ergab auf Basis der Generierung von Nutzerkarten Erkenntnisse {\"u}ber biometrische Werte, individuelle K{\"o}rpergr{\"o}ßen und unterschiedliche Handhabungsprinzipien.}, subject = {Materialit{\"a}t}, language = {de} } @phdthesis{Azari, author = {Azari, Banafsheh}, title = {Bidirectional Texture Functions: Acquisition, Rendering and Quality Evaluation}, doi = {10.25643/bauhaus-universitaet.3779}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180820-37790}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {As one of its primary objectives, Computer Graphics aims at the simulation of fabrics' complex reflection behaviour. Characteristic surface reflectance of fabrics, such as highlights, anisotropy or retro-reflection arise the difficulty of synthesizing. This problem can be solved by using Bidirectional Texture Functions (BTFs), a 2D-texture under various light and view direction. But the acquisition of Bidirectional Texture Functions requires an expensive setup and the measurement process is very time-consuming. Moreover, the size of BTF data can range from hundreds of megabytes to several gigabytes, as a large number of high resolution pictures have to be used in any ideal cases. Furthermore, the three-dimensional textured models rendered through BTF rendering method are subject to various types of distortion during acquisition, synthesis, compression, and processing. An appropriate image quality assessment scheme is a useful tool for evaluating image processing algorithms, especially algorithms designed to leave the image visually unchanged. In this contribution, we present and conduct an investigation aimed at locating a robust threshold for downsampling BTF images without loosing perceptual quality. To this end, an experimental study on how decreasing the texture resolution influences perceived quality of the rendered images has been presented and discussed. Next, two basic improvements to the use of BTFs for rendering are presented: firstly, the study addresses the cost of BTF acquisition by introducing a flexible low-cost step motor setup for BTF acquisition allowing to generate a high quality BTF database taken at user-defined arbitrary angles. Secondly, the number of acquired textures to the perceptual quality of renderings is adapted so that the database size is not overloaded and can fit better in memory when rendered. Although visual attention is one of the essential attributes of HVS, it is neglected in most existing quality metrics. In this thesis an appropriate objective quality metric based on extracting visual attention regions from images and adequate investigation of the influence of visual attention on perceived image quality assessment, called Visual Attention Based Image Quality Metric (VABIQM), has been proposed. The novel metric indicates that considering visual saliency can offer significant benefits with regard to constructing objective quality metrics to predict the visible quality differences in images rendered by compressed and non-compressed BTFs and also outperforms straightforward existing image quality metrics at detecting perceivable differences.}, subject = {Wahrnehmung}, language = {en} } @phdthesis{Bachtijor2003, author = {Bachtijor, Abdussaljamov Abdusasamatowitsch}, title = {Untersuchungen zur hygro-mechanischen Stabilit{\"a}t von kristallinem Calciumsulfat-Halbhydrat : Kornzerfall von Stuckgips im Wasser}, doi = {10.25643/bauhaus-universitaet.77}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040319-807}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2003}, abstract = {Bei der direkten thermische Umwandlung von Gips in Stuckgips entstehen texturierte Halbhydratkristallite von geringer Best{\"a}ndigkeit gegen hygro-mechnische Beanspruchung. {\"U}berl{\"a}sst man diese texturierten Kristallite einer nat{\"u}rlichen Alterung, werden \"Heilungseffekte\" beobachtet, die durch lokale Umkristallisierungsreaktion an Oberfl{\"a}chendefekten erkl{\"a}rt werden k{\"o}nnen. Die gealterten Stuckgipse sind stabiler gegen hygro-mechanische Beanspruchungen. Durch Bespr{\"u}hung von Gips mit verd{\"u}nnten w{\"a}ssrigen Salzl{\"o}sungen vor der Calcivierung entsteht aridisierter Stuck geringer texturiert und damit stabiler gegen hygro-mechanische Beanspruchungen.}, subject = {Gips}, language = {de} } @phdthesis{Bakir, author = {Bakir, Mirette}, title = {Technologies of Expression, Originality and the Techniques of the Observer}, doi = {10.25643/bauhaus-universitaet.2584}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160531-25844}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Inhaltliche Struktur: Theoretischer Teil: Um Kulturtechniken des k{\"u}nstlerischen Ausdruckes, und damit den Bezug zwischen Kunst und Medientechnologie zu ergr{\"u}nden, wurde das Verh{\"a}ltnis zwischen dem Betrachter und dem Betrachteten erforscht. Begriffe wie Originalit{\"a}t, Repr{\"a}sentation, Imitation sowie Aneignung und Rezeption kommen an historischen Beispielen zur Diskussion. Praktischer Teil: Mit zwei Ausstellungen (Malerei, Installation) wurden verschiedene Modelle des Sehens problematisiert, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur begr{\"u}nden. Außerdem wurden die Unterschiede zwischen Beobachter und Betrachter/Zuschauer in Ausstellungssituationen hinterfragt. Kurzfassung: Medientechnologie hat sich selbst zu einer Kunstform entwickelt. Sie kann K{\"u}nstler dabei unterst{\"u}tzen, ihre Ideen handwerklich umzusetzen (Beispiel: Camera Obscura) und zu reflektieren. Dabei geht es um mehr als um technische Hilfmittel f{\"u}r den k{\"u}nstlerischen Ausdruck. Wird die Beziehung zwischen Betrachter und Betrachtetem als eine Transaktion gesehen, in der beide Begriffe gleichermaßen aufs Spiel gesetzt werden, dann ist es notwendig eine Visualit{\"a}t zu bestimmen, an der der Betrachter (im Sinne von Jonathan Crary) aktiv teilnimmt. Das Sehen darf nicht als absolute Erfahrung verstanden werden, denn einzeln analysiert - ohne Einbeziehung anderer Sinneswahrnehmungen und deren mediale Erweiterungen - f{\"u}hrt es zu keinem ad{\"a}quaten Verst{\"a}ndnis davon, wie Bedeutungen produziert werden. Daraus ergibt sich die Forschungsfrage, wie die k{\"u}nstlerische Reaktion auf die im 19. Jahrhundert aufstrebenden Fotografie die Ausdrucksformen beeinflusste und ob sich die gegenseitige Abh{\"a}ngigkeit von Malerei und Fotografie wissenschaftlich-k{\"u}nstlerisch rekonstruieren l{\"a}sst. Die theoretische Referenz f{\"u}r diese Forschung bildeten Theorieans{\"a}tze nicht der Kunstgeschichte, sondern der „Visual Culture Studies", konkret: Martin Jay („Scopic Regimes of Modernity"), Jonathan Crary („Techniques of the Observer") und Rosalind Krauss („Originality"). Dazu wurde die Rezeption der aufkommenden Fotografie in der k{\"u}nstlerischen Produktion beispielhaft untersucht, wobei mit Eug{\`e}ne Delacroix, Gustave Caillebotte sowie dem k{\"u}nstlerischen Dialog zwischen Henri Matisse und Brassai die Problematik herausgearbeitet wurde, mit der sich die bildende Kunst im Lauf jener Jahrzehnte, in denen die Fotografie sich etabliert hat, konfrontiert sah. Sie war eine medientechnische Neuheit mit {\"a}lteren Wurzeln und diente der Malerei als Hilfsmittel (Camera Obscura) und hat durch ihr technische Potenzial dennoch das Verst{\"a}ndnis von Kunst radikal ver{\"a}ndert: sie l{\"o}ste das Ideal einer bestimmten Maltechnik ab, die sich mit dem Verbergen des Pinselstriches verband, und bedeutete in diesem gewissen Sinn das „Ende der Kunst" (nach Paul Delaroche). Bis in die heutige Kunstproduktion zieht sich die Frage, was nach dem Ende der Perfektionierung von Reproduktion durch ihre {\"U}bernahme mittels medientechnischer Apparatur, die nun selbst zum Ausdruck strebt, {\"u}berhaupt noch ein „Kunstwerk" ist oder sein kann. Technisch gest{\"u}tzte Formen der Aneignung und Imitation stellen das klassische Wertemodell der meisterlich ausgef{\"u}hrten Repr{\"a}sentation von Wirklichkeit in Frage, obwohl „Originalit{\"a}t" angesichts der Flut von Reproduktionen doch immer noch - oder gerade deswegen - eine Wertsch{\"a}tzung erf{\"a}hrt. Daher wurden dann auch im k{\"u}nstlerischen Teil verschiedene Modelle des Sehens getestet, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur beeinflussen und festlegen. Dabei wurde vor allem auch die Rolle der Beobachter reflektiert - die anders als bei Unterhaltungsmedien - in Kunstkontexten eben keine passiven Zuschauer sind. Was den K{\"u}nstler, und was den Betrachter von Kunst definiert, l{\"a}sst sich gleichwohl weder auf ein bestimmte Sinnlichkeit noch eine bestimmte Medientechnologie reduzieren. Wie schon nach dem Aufkommen der Fotografie werden K{\"u}nstler weiterhin auf der Suche nach neuen Ausdrucksformen sein, um andere Weltwahrnehmungen und neue, andere Perspektiven menschlicher Existenz zu erlangen. Mediale Technologien haben sie dabei immer schon unterst{\"u}tzt. Aus meiner Untersuchung schließe ich, dass neue Technologien Kunst nicht definitv beeinflussen, wohl aber ihren Entstehungsprozess ver{\"a}ndern und beeinflussen k{\"o}nnen. Die Frage, wie das geschieht und welche Effekte es zeitigt, bedarf einer stets erneuerten Verhandlung. Daraus folgt die Schlussfolgerung, dass man von K{\"u}nstlern verlangen kann oder sogar muss, sich vor der Wirklichkeit der Technologie nicht zur{\"u}ckzuziehen, sondern sich medientechnische Kompetenzen anzueignen und sich aktiv am Diskurs um neue Technologien zu beteiligen.}, subject = {Beobachter}, language = {en} } @phdthesis{Baron, author = {Baron, Nicole}, title = {Natural Urban Resilience: Understanding general urban resilience through Addis Ababa's inner city}, doi = {10.25643/bauhaus-universitaet.4416}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210428-44166}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This dissertation describes the urban actors and spatial practices that contribute to natural urban resilience in Addis Ababa's inner city. Natural urban resilience is a non-strategical and bottom-up, everyday form of general urban resilience - an urban system's ability to maintain its essential characteristics under any change. This study gains significance by exposing conceptual gaps in the current un-derstanding of general urban resilience and highlighting its unconvincing applicability to African cities. This study attains further relevance by highlighting the danger of the ongoing large-scale redevelopment of the inner city. The inner city has naturally formed, and its urban memory, spaces, and social cohesion contribute to its primarily low-income population's resilience. This thesis argues that the inner city's demolition poses an incalculable risk of maladaptation to future stresses and shocks for Addis Ababa. The city needs a balanced urban discourse that highlights the inner city's qualities and suggests feasible urban transformation measures. "Natural Urban Resilience" contributes an empirical study to the debate by identifying those aspects of the inner city that contribute to general resilience and identifies feasible action areas. This study develops a qualitative research design for a single case study in Addis Ababa. The data is obtained through expert interviews, interviews with resi-dents, and the analysis of street scene photos, which are abstracted using Grounded Theory. That way, this thesis provides first-time knowledge about who and what generates urban resilience in the inner city of Addis Ababa and how. Furthermore, the study complements existing theories on general urban resilience. It provides a detailed understanding of the change mechanisms in resilience, of which it identifies four: adaptation, upgrading, mitigation, and resistance. It also adapts the adaptive cycle, a widely used concept in resilience thinking, conceptually for urban environments. The study concludes that the inner city's continued redevelopment poses an incalculable threat to the entire city. Therefore, "Natural urban resilience" recommends carefully weighing any intervention in the inner city to promote Addis Ababa's overall resilience. This dissertation proposes a pattern language for natural urban resilience to support these efforts and to translate the model of natural urban resilience into practice.}, subject = {Stadtforschung}, language = {en} } @phdthesis{Baselau2005, author = {Baselau, Christian}, title = {Entwicklung eines Verfahrens zur Beurteilung der Verkehrsqualit{\"a}t auf Straßen mit 2+1-Verkehrsf{\"u}hrung}, doi = {10.25643/bauhaus-universitaet.737}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060221-7754}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2005}, abstract = {Die vorliegende Arbeit hatte zum Ziel, f{\"u}r Strecken mit 2+1-Verkehrsf{\"u}hrung (Straßentyp RQ 15,5) ein Verfahren zum Nachweis der Verkehrsqualit{\"a}t zu entwickeln. Dabei wurden in einem ersten Schritt zun{\"a}chst f{\"u}r freie Streckenabschnitte Beziehungen zwischen den Verkehrsst{\"a}rken (q) und den mittleren Pkw-Reisegeschwindigkeiten (v) ermittelt und darauf aufbauend ein Bemessungsverfahren abgeleitet. In einem zweiten Schritt wurde das Verfahren erweitert, um f{\"u}r den Fall der Einbindung planfreier Knotenpunkte ebenfalls eine Bewertung vornehmen zu k{\"o}nnen. Bislang standen in Deutschland keine ausreichenden Erkenntnisse {\"u}ber den Zusammenhang zwischen q und v f{\"u}r Strecken mit einem RQ 15,5 zur Verf{\"u}gung. Eine Literaturanalyse ergab, dass sich fr{\"u}here Untersuchungen mehrheitlich mit dem Aspekt der Verkehrssicherheit besch{\"a}ftigten. Somit stellten die eigenen Messungen und die daran anschließende Erg{\"a}nzung von Daten mit Hilfe einer mikroskopischen Verkehrsflusssimulation den Schwerpunkt der Untersuchung dar. Die empirischen Untersuchungen hatten - verglichen mit q-v-Beziehungen f{\"u}r herk{\"o}mmliche Landstraßenabschnitte - ein zum Teil deutlich h{\"o}heres Geschwindigkeitsniveau bei vergleichbaren Verkehrsst{\"a}rken zum Ergebnis. Dar{\"u}ber hinaus konnten zum Teil wesentlich h{\"o}here {\"U}berholraten festgestellt werden als bei einbahnig zweistreifigen Streckenabschnitten, bei denen ein {\"U}berholen im Gegenverkehr erlaubt ist. Zweifellos tragen auch die zweistreifigen Abschnitte eines RQ 15,5 dazu bei, Fahrzeugpulks aufzul{\"o}sen. F{\"u}r die aus mehreren aufeinander folgenden ein- und zweistreifigen Abschnitten bestehenden Untersuchungsstrecken, konnte jedoch insgesamt keine bedeutsame Pulkaufl{\"o}sung festgestellt werden. Dies ist vor allem dadurch begr{\"u}ndet, dass die Strecken mit einem einstreifigen Abschnitt endeten. Das Simulationsprogramm LASI2+1 wurde speziell auf die Simulation des Verkehrsablaufs auf einer Strecke mit 2+1-Verkehrsf{\"u}hrung abgestimmt. Die Kalibrierung des Modells erfolgte auf Basis von Erkenntnissen lokaler Messungen (insbesondere Zeitl{\"u}cken und Geschwindigkeitsverteilungen). Im Rahmen der Validierung erfolgte ein Abgleich zwischen den Ergebnissen der Messungen mit den mit LASI2+1 simulierten f{\"u}r jede einzelne nachgebildete Untersuchungsstrecke anhand der Parameter q und v. Mit LASI2+1 wurden zahlreiche Simulationsl{\"a}ufe durchgef{\"u}hrt, bei denen eine Vielzahl von Kombinationen der Streckenparameter sowie der Verkehrszusammensetzung bei einem m{\"o}glichst breiten Spektrum von Verkehrsbelastungen betrachtet wurden. Die Ergebnisse lagen zun{\"a}chst in „Punktwolken" vor, wobei jeweils ein Punkt beschrieben wird durch eine in einem 5-Minuten-Intervall g{\"u}ltige Verkehrsst{\"a}rke q und der zu diesem Intervall geh{\"o}rigen mittleren Reisegeschwindigkeit der Pkw v. Zur Darstellung der den Verkehrsablauf beschreibenden Punktwolken wurden verschiedene makroskopische Modelle getestet. Dabei wurden ein- und zweistreifige Abschnitte getrennt voneinander betrachtet. Nach Anwendung mathematischer Verfahren zur Kurvenanpassung ergaben f{\"u}r die einstreifigen Abschnitte Wurzelfunktionen die besten N{\"a}herungen zur Beschreibung der Zusammenh{\"a}nge zwischen q und v. F{\"u}r die leicht konvexen Auspr{\"a}gungen in den q-v-Punktwolken der zweistreifigen Abschnitte lieferten lineare Funktionen, die {\"u}ber Verkehrsdichte (k)-Geschwindigkeits-Relationen hergeleitet wurden, die besten Ergebnisse. Mit Hilfe von varianzanalytischen Berechnungen konnten außerdem die Einfl{\"u}sse der verschiedenen Trassierungsparameter quantifiziert werden. L{\"a}ngsneigung und Schwerverkehrsanteile wurden direkt in den insgesamt zehn q-v-Diagrammen dargestellt. Einfl{\"u}sse durch die L{\"a}ngen der Teilabschnitte bzw. die Anzahl der Abschnitte wurden {\"u}ber Abminderungen bzw. Erh{\"o}hungen der Pkw-Reisegeschwindigkeiten ber{\"u}cksichtigt. Daraus wurden in einem weiteren Schritt Korrekturfaktoren ermittelt. F{\"u}r den konkreten Fall eines planfreien Knotenpunkttyps im so genannten unkritischen Wechselbereich wurden weitere Einfl{\"u}sse auf die Pkw-Reisegeschwindigkeit ermittelt, die die Auswirkungen der sich im Knotenpunkt {\"a}ndernden Verkehrsst{\"a}rke (n{\"a}mlich deutlich geringere Geschwindigkeiten gegen{\"u}ber dem durchgehenden Fahrstreifen) ber{\"u}cksichtigen. Durch die Ergebnisse dieser Arbeit liegen erstmals abgesicherte q-v-Diagramme f{\"u}r freie Strecken mit 2+1-Verkehrsf{\"u}hrung einschließlich planfreier Knotenpunkte in unkritischen Wechselbereichen vor, die einen Diskussionsbeitrag f{\"u}r eine Aufnahme in Fortschreibungen der derzeit g{\"u}ltigen Regelwerke darstellen.}, subject = {Verkehrsablauf}, language = {de} } @phdthesis{Bauer1997, author = {Bauer, Klaus-J{\"u}rgen}, title = {Minima Aesthetica - Banalit{\"a}t als Stragegische Subversion der Architektur}, doi = {10.25643/bauhaus-universitaet.39}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040220-414}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1997}, abstract = {Die europ{\"a}ische Gegenwartsarchitektur, die sich exemplarisch etwa in Arbeiten von Herzog \& deMeuron, Adolf Krischanitz oder Rem Kohlhaas manifestiert, verbindet eine Beziehung zum Gew{\"o}hnlichen, Allt{\"a}glichen, Banalen. Diese Beziehung ist unklar und problematisch, da {\"u}blicherweise Architektur auf der einen Seite und Banalit{\"a}t auf der anderen Seite einander ausschliessende Begriffspaare bezeichnen. Diese Hinwendung der Architektur zum Gew{\"o}hnlichen entwickelt sich historisch als ein Modell, welches Gew{\"o}hnlichkeit als ethisches Prinzip etabliert, das unabdingbar mit der Entwicklung der Kultur verbunden ist. Besonders im zwanzigsten Jahrhundert werden solcherart einflußreiche Alternativen zu einer Architektur des Besten, Gr{\"o}ßten und Sch{\"o}nsten vorgestellt. Der Regelfall f{\"u}r die Beurteilung der Beziehungen zwischen Architektur und Banalit{\"a}t ist allerdings die Kritik der Banalit{\"a}t. Hier gibt es zwei haupts{\"a}chliche Kritikmuster, n{\"a}mlich die Kritik von Banalit{\"a}t als Bedeutungslosigkeit und die Kritik der Banalit{\"a}t als Wertlosigkeit. Problematisch ist eine Kritik der Banalit{\"a}t dann, wenn sie objektorientiert argumentiert, anstatt Interpretationsmodelle zu untersuchen, da in Gegenst{\"a}nden keine Bedeutungen liegen, sondern nur Unterschiede, die es dem Betrachter m{\"o}glich machen, ihnen Bedeutung zuzuschreiben. Genauso wie eine objektorientierte Kritik an Banalit{\"a}t nicht zielf{\"u}hrend sein kann, so sind auch Versuche, eine {\"A}sthetik des Banalen zu begr{\"u}nden, fragw{\"u}rdig. Ein Kunstwerk oder auch Architektur definiert sich nicht {\"u}ber seine Neutralit{\"a}t, sondern {\"u}ber seine Differenz zum Allt{\"a}glichen, Gew{\"o}hnlichen, Banalen. Eine Wechselwirkung zwischen Architektur und Banalit{\"a}t ist also nur {\"u}ber die Effekte des Gew{\"o}hnlichen untersuchbar, da das Gew{\"o}hnliche selbst uninterpretiert und unsichtbar bleiben muß. Entscheidend ist letztlich die Frage, auf welche Art Architektur Banalit{\"a}t f{\"u}r ihre Transformationen ben{\"u}tzt. Ein Erkl{\"a}rungsmodell ist der Kantsche Begriff des Parergon, der zeigt, wie sich Architektur durch R{\"a}nder, das Sekund{\"a}re, das Gew{\"o}hnliche konstituiert. Das Parergon ist dabei subversiv und sinister, weil es die herk{\"o}mmliche Einheit der Architektur zerst{\"o}rt. Letztlich also ist die Ann{\"a}herung der zeitgen{\"o}ssischen Architektur an die Banalit{\"a}t eine subversive Differenzierungsstrategie, mit der durch scheinbare N{\"a}he gr{\"o}ßtm{\"o}gliche Distanzierung erreicht wird.}, subject = {Architektur / {\"A}sthetik}, language = {de} } @phdthesis{Baumbusch1998, author = {Baumbusch, J{\"u}rgen}, title = {Zur Kontaktsituation zwischen mineralischen Basiserdstoffen und geosynthetischen Filterelementen}, doi = {10.25643/bauhaus-universitaet.60}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040310-632}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1998}, subject = {Bodenfilter}, language = {de} } @phdthesis{Bauriedel2009, author = {Bauriedel, Christian}, title = {Ein computergest{\"u}tztes Modellsystem f{\"u}r die Generierung von st{\"a}dtischen Raumstrukturen}, doi = {10.25643/bauhaus-universitaet.1396}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090729-14818}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {Die Arbeit besch{\"a}ftigt sich mit der komplexen Aufgabe Stadtstrukturen mit einem Simulationsmodell im Rechner erzeugen zu k{\"o}nnen. Daf{\"u}r wird ein Vierebenenmodell als Untermodellebene eingef{\"u}hrt, um mit allgemeinen Informationen, Parzellierung, Geb{\"a}uden und Optimierung der Struktur arbeiten zu k{\"o}nnen.}, subject = {Stadtstruktur}, language = {de} } @phdthesis{Bayer1999, author = {Bayer, Veit}, title = {Zur Zuverl{\"a}ssigkeitsbeurteilung von Baukonstruktionen unter dynamischen Einwirkungen}, doi = {10.25643/bauhaus-universitaet.19}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040205-215}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1999}, abstract = {Die Arbeit befaßt sich mit varianzmindernden Verfahren zur Monte Carlo Simulation von stochastischen Prozessen, zum Zweck der Zuverl{\"a}ssigkeitsbeurteilung von Baukonstruktionen mit nichtlinearem Systemverhalten. Kap. 2 ist eine Literaturstudie zu varianzmindernden Monte Carlo Methoden. In Kap. 3 wird die Spektrale Darstellung eines station{\"a}ren, skalaren Gauß - Prozesses hergeleitet. Auf dieser Grundlage werden verschiedene Simulationsmodelle diskutiert. Das in Kap. 4 entwickelte varianzmindernde Simulationsverfahren basiert auf der Spektralen Darstellung. Nach einer ersten Pilotsimulation werden die Frequenzen f{\"u}r die Einf{\"u}hrung zuf{\"a}lliger Amplituden bestimmt und deren Parameter angepaßt. Der zweite Lauf erfolgt mit diesen Parametern nach dem Prinzip des Importance Sampling. Das Verfahren wird in Kap. 5 f{\"u}r eine Br{\"u}cke unter Erdbebenbelastung angewendet. Die Br{\"u}cke ist mit sog. Hysteretic Devices zur Energiedissipation ausger{\"u}stet. Es werden einerseits die Genauigkeit und Effizienz des Simulationsverfahrens, andererseits die Leistungsf{\"a}higkeit der Hysteretic Devices zur Erdbebenert{\"u}chtigung von Bauwerken demonstriert.}, subject = {Baukonstruktion}, language = {de} } @phdthesis{Beck, author = {Beck, Stephan}, title = {Immersive Telepresence Systems and Technologies}, doi = {10.25643/bauhaus-universitaet.3856}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190218-38569}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {149}, abstract = {Modern immersive telepresence systems enable people at different locations to meet in virtual environments using realistic three-dimensional representations of their bodies. For the realization of such a three-dimensional version of a video conferencing system, each user is continuously recorded in 3D. These 3D recordings are exchanged over the network between remote sites. At each site, the remote recordings of the users, referred to as 3D video avatars, are seamlessly integrated into a shared virtual scenery and displayed in stereoscopic 3D for each user from his or her perspective. This thesis reports on algorithmic and technical contributions to modern immersive telepresence systems and presents the design, implementation and evaluation of the first immersive group-to-group telepresence system in which each user is represented as realistic life-size 3D video avatar. The system enabled two remote user groups to meet and collaborate in a consistent shared virtual environment. The system relied on novel methods for the precise calibration and registration of color- and depth- sensors (RGBD) into the coordinate system of the application as well as an advanced distributed processing pipeline that reconstructs realistic 3D video avatars in real-time. During the course of this thesis, the calibration of 3D capturing systems was greatly improved. While the first development focused on precisely calibrating individual RGBD-sensors, the second stage presents a new method for calibrating and registering multiple color and depth sensors at a very high precision throughout a large 3D capturing volume. This method was further refined by a novel automatic optimization process that significantly speeds up the manual operation and yields similarly high accuracy. A core benefit of the new calibration method is its high runtime efficiency by directly mapping from raw depth sensor measurements into an application coordinate system and to the coordinates of its associated color sensor. As a result, the calibration method is an efficient solution in terms of precision and applicability in virtual reality and immersive telepresence applications. In addition to the core contributions, the results of two case studies which address 3D reconstruction and data streaming lead to the final conclusion of this thesis and to directions of future work in the rapidly advancing field of immersive telepresence research.}, subject = {Virtuelle Realit{\"a}t}, language = {en} } @phdthesis{BeckerLamers2007, author = {Becker-Lamers, Cornelie}, title = {Die nationalen Umweltzeichen. Zur Entstehung einer globalen Tradition}, doi = {10.25643/bauhaus-universitaet.942}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20071120-10066}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2007}, abstract = {Die Dissertation erschließt der deutschen Forschung die derzeit weltweit vergebenen nationalen Umweltzeichen. Dabei steht nicht der politische Kontext, sondern die gestalterisch-formale und inhaltliche Standortbestimmung, Analyse und Interpretation der Zeichenfamilie im Vordergrund. Teil I der Arbeit unterwirft den Untersuchungsgegenstand einer semiotischen Analyse nach Umberto Eco und diskutiert die Umweltzeichen im Kontext von graphischen Zeichen, Markenzeichen, Piktogrammen und Emblemen. Ein kurzer Abriss der Geschichte von Natur- und Welt-, d.h. Globusdarstellungen lotet den Bildervorrat aus, auf den zur Darstellung von 'Umwelt' zur{\"u}ckgegriffen werden kann. Das Umweltzeichen-Design, so zeigt sich, arbeitet mit den rhetorischen Figuren des pars pro toto bzw. des totum pro parte, um die kulturelle Einheit von /Umwelt/ und /Umweltschutz/ graphisch zu fassen. Teil II, der Hauptteil der Arbeit, besteht aus der ikonographischen Analyse und ikonologischen Interpretation aller nationalen Umweltzeichen gem{\"a}ß Theorie und Methode von Aby Warburg und Erwin Panofsky. In 30 Kapiteln werden f{\"u}r jedes Zeichen Informationen zu Design und Designer/in, Entstehungsjahr, Abbildungsvorschriften und Intentionen der Vergabeinstitutionen zusammengestellt und die Vor-Bilder und Hintergr{\"u}nde zu einer ikonographisch-ikonologischen Deutung zusammengetragen. Insbesondere f{\"u}r die in der Arbeit detaillierter analysierten Zeichen aus Deutschland, Japan, Kanada, den USA, {\"O}sterreich und Skandinavien erm{\"o}glicht die Untersuchung tiefe Einsichten in die Kulturgeschichte des jeweiligen Vergabelandes. Erkenntnisinteresse der Arbeit ist f{\"u}r jedes einzelne Zeichen die Entschl{\"u}sselung des (inter)kulturellen Bildged{\"a}chtnisses zum Thema /Umweltschutz/ vor dem Hintergrund der Herkunftskultur und ihrer nationalen Mythen. Farbgebung und Zeichenbildungsstrategien zeigen beim Untersuchungsgegenstand den Verzicht auf Signalement und Originalit{\"a}t. Neue nationale Umweltzeichen werden mehr und mehr aus dem Bildervorrat bestehender Umweltzeichen geschaffen. Die synchrone Vernetzung der Zeichen tritt gegen{\"u}ber der diachronen Verankerung im Bildervorrat der Herkunftskultur immer st{\"a}rker in den Vordergrund. Obwohl international einheitliche Gestaltungsrichtlinien fehlen, entsteht so eine globale Zeichentradition. Angesichts insbesondere des Designs und Re-Designs asiatischer Zeichen dr{\"a}ngt sich abschließend die Frage auf, ob die eigentliche Zielgruppe der nationalen Umweltzeichen noch der einheimische Konsument ist oder ob - insbesondere in den Schwellenl{\"a}ndern - die nationalen Umweltzeichenprogramme zum außenpolitischen Instrumentarium geworden sind, mit dem man sich in der Staatengemeinschaft positioniert.}, subject = {Umweltzeichen}, language = {de} } @phdthesis{Beer2005, author = {Beer, Daniel G.}, title = {Systementwurf f{\"u}r verteilte Applikationen und Modelle im Bauplanungsprozess}, doi = {10.25643/bauhaus-universitaet.750}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060418-7892}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2005}, abstract = {Der Planungsprozess im Konstruktiven Ingenieurbau ist gekennzeichnet durch drei sich zyklisch wiederholende Phasen: die Phase der Aufgabenverteilung, die Phase der parallelen Bearbeitung mit entsprechenden Abstimmungen und die Phase der Zusammenf{\"u}hrung der Ergebnisse. Die verf{\"u}gbare Planungssoftware unterst{\"u}tzt {\"u}berwiegend nur die Bearbeitung in der zweiten Phase und den Austausch der Datenbest{\"a}nde durch Dokumente. Gegenstand der Arbeit ist die Entwicklung einer Systemarchitektur, die in ihrem Grundsatz alle Phasen der verteilten Bearbeitung und unterschiedliche Arten der Kooperation (asynchron, parallel, wechselseitig) ber{\"u}cksichtigt und bestehende Anwendungen integriert. Das gemeinsame Arbeitsmaterial der Beteiligten wird nicht als Dokumentmenge, sondern als Menge von Objekt- und Elementversionen und deren Beziehungen abstrahiert. Elemente erweitern Objekte um applikationsunabh{\"a}ngige Eigenschaften (Features). F{\"u}r die Bearbeitung einer Aufgabe werden Teilmengen auf Basis der Features gebildet, f{\"u}r deren Elemente neue Versionen abgeleitet und in einen privaten Arbeitsbereich geladen werden. Die Bearbeitung wird auf Operationen zur{\"u}ckgef{\"u}hrt, mit denen das gemeinsame Arbeitsmaterial konsistent zu halten ist. Die Systemarchitektur wird formal mit Mitteln der Mathematik beschrieben, verf{\"u}gbare Technologie beschrieben und deren Einsatz in einem Umsetzungskonzept dargestellt. Das Umsetzungskonzept wird pilothaft implementiert. Dies erfolgt in der Umgebung des Internet in der Sprache Java unter Verwendung eines Versionsverwaltungswerkzeuges und relationalen Datenbanken.}, subject = {Planungsprozess}, language = {de} } @phdthesis{Behkalam, author = {Behkalam, Kaya}, title = {Seeing History - The Augmented Archive}, doi = {10.25643/bauhaus-universitaet.3781}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180822-37818}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {SEEING HISTORY - THE AUGMENTED ARCHIVE erforscht - in Theorie und Praxis - die Medialit{\"a}ten des Archivs in Zeiten des {\"U}bergangs vom Speichermedium hin zum Modus des {\"U}bertragens. Am Beispiel {\"A}gyptens seit den politischen Umw{\"a}lzungen 2011 wird ein neues Archivsystem entwickelt, das mit Hilfe von Augmented Reality Technologie - d.h. der virtuellen Erweiterung des Realraums von mobiler Videotechnik durch Metainformationen - das umfassendste bestehende Videoarchiv zur {\"a}gyptischen Revolution im Stadtraum Kairos per GPS-Kodierung zur Verf{\"u}gung stellt.}, subject = {Medienkunst}, language = {de} } @phdthesis{Berger2004, author = {Berger, Martin}, title = {Typologiebildung und Erkl{\"a}rung des Aktivit{\"a}ten-(Verkehrs-)verhaltens - ein Multimethodenansatz unter Verwendung der Optimal Matching Technik}, doi = {10.25643/bauhaus-universitaet.203}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20041115-2108}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2004}, abstract = {Vor dem Hintergrund des gesellschaftlichen Wandels sieht sich die Verkehrsforschung mit neuen Anforderungen an die Konzeption, Anpassung, Anwendung usw. von statistischen Ans{\"a}tzen zur Analyse des Aktivit{\"a}ten-(Verkehrs-)verhaltens konfrontiert, um auf Basis empirischer Daten ad{\"a}quat Zusammenh{\"a}nge der Verkehrsentstehung zu erforschen. Ausgehend von der musterorientierten Perspektive - das heißt Untersuchungsgegenstand sind chronologische Abfolgen von Ortsver{\"a}nderungen und T{\"a}tigkeiten in Form von Wege-Aktivit{\"a}tenmustern - besteht das Ziel einer m{\"o}glichst realit{\"a}tsnahen Abbildung und Erkl{\"a}rung von individuellen Unterschieden im Raum-Zeit-Verhalten. Neu bzw. kaum etabliert sind in diesem Kontext der eigens konzipierte Multimethodenansatz sowie die Optimal Matching Technik, die erweiterte Abbildungseigenschaften zur Distanzmessung zwischen Wege-Aktivit{\"a}tenmustern aufweist. Erkannt werden durch jene Methode gleiche T{\"a}tigkeiten bzw. Ortsver{\"a}nderungen, die zeitlich an unterschiedlichen Stellen der zu vergleichenden Muster angeordnet sind sowie identische Subsequenzen. Zielf{\"u}hrend in der Datenanalyse ist nachstehende Abfolge von Verfahren: Die Klassifikation von Wege-Aktivit{\"a}tenmustern zur Reduktionen deren immenser Komplexit{\"a}t gelingt durch Einsatz der Optimal Matching Technik. Diese quantifiziert (Un-){\"a}hnlichkeiten zwischen Wege-Aktivit{\"a}tenmustern („Abstandsmessung") unterschiedlicher Personen oder zu vergleichender Zeitabschnitte einer Person. Die dadurch berechnete Distanzmatrix bildet den Ausgangspunkt des clusteranalytischen Fusions-algorithmus, dessen Aufgabe die Zusammenfassung der Wege-Aktivit{\"a}tenmuster ist (explorative Stufe). Die Anwendung eines multinomialen Logit-Modells erm{\"o}glicht auf Individualebene die Vorhersage der Affinit{\"a}t zu Wege-Aktivit{\"a}tenmuster-Typen anhand von Merkmalswerten identifizierter Erkl{\"a}rungsgr{\"o}ßen der Personen, des Haushaltes usw. (induktive Stufe). Im Gegensatz zu einschl{\"a}gigen Forschungsarbeiten zeichnet sich die gew{\"a}hlte Untersuchungsstrategie durch die Objektivit{\"a}t des Vorgehens aus, da eine a-priori Bildung von Personen-kategorien nicht notwendig ist. Ebenso grenzt die Ber{\"u}cksichtigung der zuf{\"a}lligen und nicht-erkl{\"a}rbaren Verhaltensvariabilit{\"a}t durch das Wahrscheinlichkeitsprinzip des gew{\"a}hlten Logit-Modells das eigene Vorgehen von anderen Untersuchungen ab. Aufgrund der weitgehend ungekl{\"a}rten Anwendungsgrundlagen der Optimal Matching Technik befasst sich die vorliegende Arbeit zun{\"a}chst mit dessen inhaltlicher Ausrichtung am Untersuchungsgegenstand. Die Anpassung der festzulegenden Aufwandswerte, welche f{\"u}r die ben{\"o}tigten Aktionen angesetzt werden, um ein Wege-Aktivit{\"a}tenmuster in ein anderes zu transformieren, erfolgt mit Hilfe einer empirisch Absch{\"a}tzung, die weit {\"u}ber ein argumentatives Vorgehen hinausgeht. Der ermittelte Sequenzabstand inkludiert dabei die operationsspezifische Distanz bei {\"U}berg{\"a}ngen zwischen den konstituierenden Zust{\"a}nden der zu vergleichenden Wege-Aktivit{\"a}tenmuster („Zustands{\"a}hnlichkeit"). Abstandsmaß f{\"u}r die qualitativen Zust{\"a}nde ist dabei die ermittelte Priorit{\"a}t von wege- und t{\"a}tigkeitenbezogenen Handlungen. Die Relevanz einer Ausrichtung belegt auch die durchgef{\"u}hrte Sensitivit{\"a}tsanalyse: Das Ausmaß der Empfindlichkeit der Optimal Matching Technik ist insbesondere gegen{\"u}ber der Festlegung der Aufwandswerte betr{\"a}chtlich. Um die Analysepotenziale des Multimethodenansatzes zu demonstrieren, werden exemplarisch interpersonelle Unterschiede im w{\"o}chentlichen Aktivit{\"a}ten-(Verkehrs-)verhaltens (Datenbasis: deutsches Mobilit{\"a}tspanel) analysiert. Ergebnis der Klassifikation (explorative Analysestufe) ist eine auf den ersten Blick inhaltlich stichhaltige Wege-Aktivit{\"a}tenmuster-Typologie charakteristischer Wochenabl{\"a}ufe des Aktivit{\"a}ten-(Verkehrs-)verhaltens: Unterschiedliche Arten, zeitlicher Umfang und zeitliche Lage der Haupt-aktivit{\"a}ten, unterschiedliche Verkehrsverhaltensweisen sowie unterschiedliche clusterspezifische Tag zu Tag Rhythmen, Gleichf{\"o}rmigkeiten, Schwankungen usw. des Raum-Zeit-Verhaltens kennzeichnen die Wege-Aktivit{\"a}tenmuster-Typen. Die Abbildungs-eigenschaften der Optimal-Matching Technik zeichnen sich in den erstellten Clustern nur teilweise ab: W{\"a}hrend die Zustandselementkomposition - augenscheinlich betrachtet - passabel durch die Wege-Aktivit{\"a}tenmuster-Typologie abgebildet wird, bleibt ungewiss, ob und inwieweit dies f{\"u}r die Abfolge{\"a}hnlichkeit gilt. Aus dem induktiven Analyseschritt geht hervor: Alter, Geschlecht, Verf{\"u}gbarkeit einer {\"O}PNV-Zeitkarte, F{\"u}hrerscheinbesitz und mit herausragender Bedeutung der Erwerbsstatus signalisieren als maßgebende Erkl{\"a}rungsgr{\"o}ßen eine Trennwirkung. {\"U}berdies zeigt das Gesamtbild der ermittelten Wirkungsrichtungen und Effektst{\"a}rken {\"u}berzeugende Erkl{\"a}rungszusammenh{\"a}nge auf. Damit ist ein Nachweis der Praktikabilit{\"a}t des eigens konzipierten Multimethodenansatzes unter Verwendung der Optimal Matching Technik zur musterorientierten Analyse des Raum-Zeit-Verhaltens erbracht.}, subject = {Verkehrsverhalten}, language = {de} } @phdthesis{Berhe, author = {Berhe, Asgedom Haile}, title = {Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia}, doi = {10.25643/bauhaus-universitaet.4517}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211007-45175}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {336}, abstract = {This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that. However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes. Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings. By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors' as an opportunity for corruption. In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects' value chain. These propositions are made in reliance on BIM's present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM's synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies.}, subject = {Building Information Modeling}, language = {en} } @phdthesis{Berninger2004, author = {Berninger, Anna Maria}, title = {Mikrostrukturelle Eigenschaften von Quarz als Bestandteil sp{\"a}t reagierender, alkaliempfindlicher Zuschl{\"a}ge}, doi = {10.25643/bauhaus-universitaet.478}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20050310-4494}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2004}, abstract = {Zwischen den Jahren 1920 und 1930 kam es an der kalifornischen K{\"u}ste zu Bausch{\"a}den an Br{\"u}cken und Fahrbahnen, die sich vor allem in einer deutlichen Rissbildung {\"a}ußerten. Seither werden immer wieder Bausch{\"a}den beschrieben, deren Ursache in der Reaktion von Zuschl{\"a}gen, die „reaktive" Kiesels{\"a}ure enthalten, mit der Porenl{\"o}sung des Betons zu sehen ist. Diese Reaktion wird als Alkali-Kiesels{\"a}ure Reaktion (AKR) bezeichnet. Seit der ersten Ver{\"o}ffentlichung von Stanton {\"u}ber die „alkali-aggregate reaction" an opalhaltigen Zuschl{\"a}gen sind hunderte von Forschungsarbeiten zu diesem Thema durchgef{\"u}hrt und deren Ergebnisse ver{\"o}ffentlicht worden. Trotz eingehender Forschung seit mehr als 8o Jahren ist weder der Mechanismus der AKR vollst{\"a}ndig gekl{\"a}rt noch eine eindeutige Voraussage {\"u}ber die Gef{\"a}hrdung von Bauwerken oder Bauteilen mit potentiell AKR-empfindlichen Zuschl{\"a}gen m{\"o}glich. Das liegt vor allen Dingen daran, das es sich bei der AKR um eine Reaktion handelt, die aus einer komplexen Abfolge chemischer und physikalischer Prozesse besteht, die in ihrer Gesamtheit zu einer Sch{\"a}digung von Beton bzw. Betonbauteilen und Bauwerken f{\"u}hren k{\"o}nnen. Eine geschlossene Beschreibung und Behandlung dieser Reaktion ist nicht m{\"o}glich, solange keine befriedigende Kenntnis {\"u}ber den Ablauf der einzelnen Schritte vorliegt. Dazu bedarf es grunds{\"a}tzlicher Untersuchungen der einzelnen chemischen und physikalischen Reaktionsschritte sowie einer m{\"o}glichst quantitativen Bewertung der verschiedenen Einflussfaktoren. Grunds{\"a}tzlich gibt es weltweit eine ganze Reihe von Richtlinien und Normen , die dazu verhelfen sollen, Sch{\"a}digungen an Bauwerken durch AKR zu verhindern. In Deutschland ist das momentan g{\"u}ltige Regelwerk die sogenannte Alkali-Richtlinie des deutschen Ausschusses f{\"u}r Stahlbeton (DAfStb). Sie dient zur Beurteilung von Zuschlag nach DIN 4226 [6, 7, 8] mit alkaliempfindlichen Bestandteilen. Dabei bezieht sich der Teil 2 der Richtlinie auf Zuschl{\"a}ge mit Opalsandstein, Kieselkreide und Flint aus bestimmten Gewinnungsgebieten. Hier wird eine reine Zuschlagpr{\"u}fung gefordert. Teil 3 der Richtlinie bezieht sich auf pr{\"a}kambrische Grauwacken und andere alkaliempfindliche Gesteine. Gefordert werden hier Pr{\"u}fungen der Zuschl{\"a}ge selbst sowie Pr{\"u}fung an Betonbalken und 30er W{\"u}rfeln in der Nebelkammer. F{\"u}r die meisten in der Richtlinie genannten Zuschl{\"a}ge bilden die Pr{\"u}fungen und Vorschriften eine ausreichende Sicherheit, um eine AKR zu vermeiden. Dennoch treten immer wieder Sch{\"a}den mit Zuschl{\"a}gen auf, die nach der Alkali-Richtlinie als unempfindlich eingestuft werden m{\"u}ssten. Dabei handelt es sich in der Regel um Schadensf{\"a}lle, die erst nach mehreren Jahren mit sp{\"a}t reagierenden AKR-empfindlichen Zuschl{\"a}gen auftreten. Zu diesen Zuschl{\"a}gen, die gegebenenfalls speziell im Nebelkammertest innerhalb von neun Monaten keine signifikante Dehnung (<0,6mm/m) aufweisen, geh{\"o}ren Stressquarze, Kieselkalk, Granit, Porphyr, Kieselschiefer und Grauwacke. Die vorliegende Arbeit dient speziell der Beurteilung und Einordnung von unterschiedlichen kristallinen Quarzmodifikationen sowie der Ermittlung geeigneter Untersuchungsmethoden f{\"u}r die Beurteilung der AKR-Empfindlichkeit von Quarz.}, subject = {Quarz}, language = {de} } @phdthesis{Bianco, author = {Bianco, Marcelo Jos{\´e}}, title = {Coupling between Shell and Generalized Beam Theory (GBT) elements}, doi = {10.25643/bauhaus-universitaet.4391}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43914}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {265}, abstract = {In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible. Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution. Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance. Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis. Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements. Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction. For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem. Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field. From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element. As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section. Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.}, subject = {Biegetheorie}, language = {en} } @phdthesis{Bielik, author = {Bielik, Martin}, title = {FORM-ACTIVITY-MOVEMENT INTERACTION MODEL}, doi = {10.25643/bauhaus-universitaet.4397}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210407-43970}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {269}, abstract = {This dissertation investigates the interactions between urban form, allocation of activities, and pedestrian movement in the context of urban planning. The ability to assess the long-term impact of urban planning decisions on what people do and how they get there is of central importance, with various disciplines addressing this topic. This study focuses on approaches proposed by urban morphologists, urban economists, and transportation planners, each aiming the attention at a different part of the form-activity-movement interaction. Even though there is no doubt about the advantages of these highly focused approaches, it remains unclear what is the cost of ignoring the effect of some interactions while considering others. The general aim of this dissertation is to empirically test the validity of the individual models and quantify the impact of this isolationist approach on their precision and bias. For this purpose, we propose a joined form-activity-movement interaction model and conduct an empirical study in Weimar, Germany. We estimate how the urban form and activities affect movement as well as how movement and urban form affect activities. By estimating these effects in isolation and simultaneously, we assess the bias of the individual models. On the one hand, the empirical study results confirm the significance of all interactions suggested by the individual models. On the other hand, we were able to show that when these interactions are estimated in isolation, the resulting predictions are biased. To conclude, we do not question the knowledge brought by transportation planners, urban morphologists, and urban economists. However, we argue that it might be of little use on its own. We see the relevance of this study as being twofold. On the one hand, we proposed a novel methodological framework for the simultaneous estimation of the form-activity-movement interactions. On the other hand, we provide empirical evidence about the strengths and limitations of current approaches.}, subject = {Stadtplanung}, language = {en} } @phdthesis{Bittrich2001, author = {Bittrich, Daniel}, title = {Verbunddokumente als Nutzeroberfl{\"a}che von Software f{\"u}r die Tragwerksplanung}, doi = {10.25643/bauhaus-universitaet.20}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040212-229}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2001}, abstract = {Das Ziel der Arbeit besteht in der Entwicklung von Konzepten zur effizienten Implementierung von ingenieurgem{\"a}ßer Tragwerksplanungs-Software. Der vorgeschlagene L{\"o}sungsansatz basiert auf einer optimalen Anpassung der Nutzeroberfl{\"a}che an den spezifischen Arbeitsablauf, der Erh{\"o}hung des Wiederverwendungsgrades sowie der M{\"o}glichkeit der unabh{\"a}ngigen Erweiterbarkeit von Software-Systemen. Verbunddokumente werden als Nutzeroberfl{\"a}che und Software-Architektur benutzt, um eine Zusammenf{\"u}hrung von Standard-Software und fachspezifischen Software-Komponenten zu ingenieurgem{\"a}ßer Tragwerksplanungs-Software zu erm{\"o}glichen. Die Umsetzbarkeit des Konzeptes wird durch eine Pilotimplementierung verifiziert.}, subject = {Tragwerk}, language = {de} } @phdthesis{Bleichner2008, author = {Bleichner, Stephan M.}, title = {Das elektronisch virtualisierte Baudenkmal}, doi = {10.25643/bauhaus-universitaet.1352}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080930-14261}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Die elektronische Virtualisierung von Baudenkmalen ist neues, außergew{\"o}hnlich vielf{\"a}ltiges medientechnisches Ph{\"a}nomen; es beschreibt die urspr{\"u}ngliche Form substanziell-realer Baudenkmale, transformiert sie von einer abstrakten Beschreibung in Wort und Bild in eine immaterielle Realit{\"a}t. Die Dissertation versucht Antworten zu geben auf folgende Fragen: Ist die elektronische Virtualisierung eine Methode der Stimulation der {\"O}ffentlichkeit im Umgang mit Baudenkmalen? Ist das elektronisch virtualisierte Baudenkmal ein immaterielles Zeugnis der Kulturgeschichte in der Zukunft? Ist das substanziell-reale und das virtualisierte Baudenkmal uneingeschr{\"a}nkt gegenseitig austauschbar, ist ersteres durch letzteres ersetzbar? Die Beantwortung der Fragen h{\"a}ngt ab von den Stufen der Perfektion der elektronischen Virtualsierung von Baudenkmalen.}, subject = {Baudenkmal}, language = {de} } @phdthesis{Bleichner2011, author = {Bleichner, Stephan M.}, title = {Das axiologische Ph{\"a}nomen der Re-Inszenierung der Landshuter F{\"u}rstenhochzeit 1475 als immaterielles Kulturgut}, doi = {10.25643/bauhaus-universitaet.1453}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110620-15481}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2011}, abstract = {Das im Jahre 2003 verabschiedete und 2006 in Kraft getretene UNESCO-{\"U}bereinkommen zur Bewahrung des immateriellen Kulturerbes erweitert das Kulturverst{\"a}ndnis von gebautem Kulturerbe gem{\"a}ß der Konvention aus dem Jahre 1972 durch gelebtes Kulturerbe. Die Dissertation zeigt beispielhaft, wie sich B{\"u}rger einer Stadt und einer Region mit ihrer historischen Vergangenheit befassen und dass es lohnenswert ist, sich mit ihrem ererbten immateriellen Kulturerbe auseinander zu setzen. Sie bezeugt, dass eine moderne popul{\"a}re Kultur die Pflege des immateriellen Kulturerbes voranbringt, dass personalisierte und vergesellschaftete Individuen die Sorge um den drohenden Kulturverlust ernst nehmen und diesem aktiv, eigenst{\"a}ndig und unpolitisch entgegen treten. Ausgehend von der wertphilosophischen und kulturtheoretischen Ann{\"a}herung werden im zweiten und dritten Kapitel beispielhaft die Ur-Inszenierung im Jahre 1475 und die Re-Inszenierung im 21. Jahrhundert gegen{\"u}bergestellt. Die Ergebnisse aus der Untersuchung werden im vierten Kapitel diskutiert. An Hand der Promotionsschrift wird versucht, Antworten auf folgende Fragen zu finden: - Hat die Re-Inszenierung der „Landshuter F{\"u}rstenhochzeit 1475" des 21. Jahrhunderts das Potential eines immateriellen Kulturerbes? - Kann sie den negativen Begleiterscheinungen des Generations- wechsels und der Globalisierung entgegentreten? - Ist sie eine zeitgen{\"o}ssische Transformationsmethode von (Denkmal)Werten? - Was sind die Schutzkomponenten? - Tr{\"a}gt die Re-Inszenierung zu der kulturellen Identit{\"a}t einer Stadt an authentischem Ort bei und hat sie Einfluss auf die Gestaltung der baulich-r{\"a}umlichen Umwelt?}, subject = {Wertphilosophie}, language = {de} } @phdthesis{Blickling2006, author = {Blickling, Arno}, title = {Spezifikation des Bau-Solls durch interaktive Modellierung auf virtuellen Baustellen}, doi = {10.25643/bauhaus-universitaet.790}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20061105-8311}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2006}, abstract = {Heutige Methoden zur Soll-Spezifikation von Bauleistungen (Kostenermittlung und zeitliche Ablaufplanung) gehen von einer abstrahierten und vereinfachten Betrachtung der Zusammenh{\"a}nge bei Bauprojekten aus. Leistungsverzeichnisse, Kostenermittlungen und Bauzeitpl{\"a}ne orientieren sich nur indirekt an der Geometrie des Bauwerks und der Baustelle. Die dabei verwendeten Medien wie Papier, 2D-Dateien, digitale Leistungsbeschreibungen oder 3D-Darstellungen lassen die Suche nach Informationen auf der Baustelle zu einem zeitaufw{\"a}ndigen und in Anbetracht existierender Medientechnologien ineffizienten Prozess werden. Interaktive virtuelle Umgebungen erlauben die Aufl{\"o}sung starrer Zusammenh{\"a}nge durch interaktive Eingriffe des Anwenders und visualisieren komplexe bauproduktionstechnische Vorg{\"a}nge. Das Konzept der visuellen interaktiven Simulation der Bauproduktion sieht vor, die Soll-Spezifikation anhand eines interaktiven 3D-Modells zu entwickeln, um r{\"a}umliche Ver{\"a}nderungen und parallele Prozesse auf der virtuellen Baustelle im Rahmen der Entscheidungsfindung zum Bauablauf besser ber{\"u}cksichtigen zu k{\"o}nnen. Verlangt man einen hohen Grad an Interaktivit{\"a}t mit dem 3D-Modell, dann bieten sich Computerspieltechnologien sehr gut zu Verifikationszwecken an. Die visuelle interaktive Simulation der Bauproduktion ist damit als eine 3D-modellbasierte Methode der Prozessmodellierung zu verstehen, die Entscheidungen als Input ben{\"o}tigt und die Kostenermittlung sowie die zeitliche Ablaufplanung als Output liefert.}, subject = {Virtuelle Realit{\"a}t}, language = {de} } @phdthesis{Boccolini, author = {Boccolini, Sara}, title = {La microdensificaci{\´o}n emergente de los barrios pericentrales de C{\´o}rdoba, Argentina. Una alternativa sostenible y eficiente para la revitalizaci{\´o}n de la ciudad construida}, doi = {10.25643/bauhaus-universitaet.3745}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180427-37459}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {C{\´o}rdoba es la segunda ciudad m{\´a}s poblada de la Argentina, y posee el ejido municipal m{\´a}s extenso del pa{\´i}s, siendo un importante centro industrial y de servicios del centro del pa{\´i}s. Es adem{\´a}s la cabecera de la segunda regi{\´o}n metropolitana argentina, el {\´A}rea Metropolitana de C{\´o}rdoba (AMCBA). Si bien el desarrollo de sus {\´a}reas centrales y periurbanas es un tema bastante desarrollado acad{\´e}micamente, actualmente hay un vac{\´i}o de conocimiento en la situaci{\´o}n actual de las {\´a}reas pericentrales e intermedias de esta ciudad -aun cuando ocupan m{\´a}s del 30\% del {\´a}rea urbanizada y donde habita la mayor parte de su poblaci{\´o}n-. Es en estas {\´a}reas donde se ubica el objeto de estudio de esta tesis: los barrios pericentrales que forman un anillo alrededor del {\´a}rea central. Originados como extensiones suburbanas alrededor de 1940, y consolidados como barrios residenciales de clase media y media alta de baja densidad antes de 1970, ocupan lo que son hoy algunas de las {\´a}reas con mejor calidad ambiental y urbana de la ciudad. Los barrios pericentrales son considerados generalmente consolidados y estables; sin embargo, analizados en detalle, muestran complejas transformaciones: un vaciamiento poblacional constante, a pesar del crecimiento demogr{\´a}fico en general de C{\´o}rdoba y el AMCBA; aumento de inmuebles abandonados; y a diferencia de sectores en una similar posici{\´o}n, no son objeto de grandes inversiones inmobiliarias de renovaci{\´o}n urbana. Esta situaci{\´o}n es invisibilizada, en parte por ser resultado de procesos con poco impacto relativo en la ciudad, y en parte porque estos procesos no est{\´a}n contemplados por los modelos urbanos locales vigentes -basados en la teor{\´i}a racionalista y determinista de principios del siglo XX-, que conceptualizan a los barrios pericentrales como una "panacea urbana". Esta tesis puso en disputa estos modelos, partiendo de la discusi{\´o}n sobre un fen{\´o}meno informal detectado indefectiblemente (aunque no exclusivamente) en estos barrios pericentrales: la microdensificaci{\´o}n emergente. La imposibilidad de colocar los inmuebles existentes en el mercado hace que los propietarios busquen nuevas formas de valorizar sus propiedades, de facilitar el acceso a la vivienda a sus hijos o de invertir sus ahorros de forma segura, obteniendo una fuente adicional de ingresos: en cada parcela edificada se aumenta la cantidad de unidades funcionales, aprovechando la superficie construible vacante o refuncionalizando las construcciones obsoletas, aunque manteniendo el grano y la escala de intervenci{\´o}n respecto al tejido existente. La oferta de h{\´a}bitat en estos barrios se diversifica, y no s{\´o}lo evita la expulsi{\´o}n de poblaci{\´o}n, sino que tambi{\´e}n atrae a nuevos habitantes. Adem{\´a}s, en un tejido originalmente s{\´o}lo residencial, incorpora actividades de comercio y servicios que enriquecen el tejido funcional. El proceso se realiza sin planificaci{\´o}n general (y por supuesto fuera del marco legal): es la suma de acciones individuales que se reconstruyen como una "tendencia" o "patr{\´o}n emergente", revitalizando el tejido urbano de forma sutil pero definitiva. Se plante{\´o} como hip{\´o}tesis que la microdensificaci{\´o}n emergente es un proceso de revitalizaci{\´o}n que aprovecha el potencial del tejido de estos barrios de forma m{\´a}s sostenible y eficiente que el modelo impuesto formalmente. 10 La tesis se encuadr{\´o} bajo el enfoque sist{\´e}mico de la complejidad. Este enfoque entiende a la ciudad como un sistema complejo y din{\´a}mico, en desarrollo constante; determinado m{\´a}s por las interrelaciones entre sus componentes y entre esos componentes y el contexto, que por las condiciones de cada elemento individualmente. La calidad y cantidad de estas interacciones es primordial, al punto de definir la condici{\´o}n urbana de una aglomeraci{\´o}n. Seg{\´u}n estas premisas, un sistema urbano sostenible y eficiente ser{\´a} aquel que, maximizando recursos materiales y humanos (y de acuerdo a la capacidad de carga del sistema) desarrolle de redes de intercambio m{\´u}ltiples, diversas y descentralizadas, que generen procesos de sinergia y desarrollo inclusivos. La investigaci{\´o}n se estructur{\´o} entonces de forma tal de responder las siguientes preguntas: • En primer lugar, ?'cu{\´a}les son las condiciones espec{\´i}ficas que catalizan la microdensificaci{\´o}n en los barrios pericentrales de C{\´o}rdoba? • Siendo la microdensificaci{\´o}n una respuesta a una situaci{\´o}n particular dentro del sistema urbano, ?'Cu{\´a}l es el grado de sostenibilidad y eficiencia que aporta a los barrios pericentrales (en particular) y a C{\´o}rdoba (en general)? • Y tras haber identificado su impacto en la estructura urbana, su potencial transformador y organizativo, ?'puede el estudio de los procesos emergentes hacer un aporte conceptual e instrumental a los modelos locales de planeamiento urbano? Primeramente, un an{\´a}lisis documental reconstruy{\´o} la condici{\´o}n espec{\´i}fica de los barrios pericentrales, y el escenario actual de C{\´o}rdoba con respecto a la producci{\´o}n y acceso al h{\´a}bitat urbano. Luego se infiri{\´o} un escenario tendencial a corto y mediano plazo, que sirvi{\´o} para definir distintos patrones de territorializaci{\´o}n, incluyendo el patr{\´o}n "formal" de los barrios pericentrales. Se continu{\´o} con el an{\´a}lisis espec{\´i}fico de la microdensificaci{\´o}n, proponiendo un escenario posible a mediano plazo donde el patr{\´o}n de microdensificaci{\´o}n ha sido plenamente desarrollado, transformando cuali y cuantitativamente el tejido espacio-funcional y socioecon{\´o}mico. A partir de estos resultados, se realiz{\´o} un an{\´a}lisis comparativo de los distintos patrones de desarrollo urbano de C{\´o}rdoba en cuanto a su sostenibilidad y eficiencia. Se demostr{\´o} que el patr{\´o}n de microdensificaci{\´o}n en los barrios pericentrales es mucho m{\´a}s sostenible y eficiente que los patrones formales existentes, y se abri{\´o} la discusi{\´o}n que se desarrolla en la {\´u}ltima parte de esta tesis: El argumento desarrollado en esta investigaci{\´o}n y los resultados que de {\´e}l se desprenden tienen un car{\´a}cter anal{\´i}tico y explicativo {\´u}til para el an{\´a}lisis de otros escenarios en el contexto urbano argentino y latinoamericano. En primer lugar, sobre preferir la revitalizaci{\´o}n progresiva frente a la renovaci{\´o}n total o la creaci{\´o}n de nuevo suelo urbano en la periferia; promover una ciudad compacta, diversa e inclusiva tanto social como funcionalmente; basada en la multiplicaci{\´o}n y diversificaci{\´o}n de los agentes productores de ciudad; que considera estos procesos, as{\´i} como los mecanismos de empoderamiento, participaci{\´o}n y gobernanza como instrumentos para lograr mayor sostenibilidad y eficiencia en el desarrollo urbano. Por otro lado, esta tesis puso en relevancia el rol de los procesos emergentes en un sistema urbano como mecanismo vital para generar esta revitalizaci{\´o}n. Finalmente, se discute el aporte del enfoque sist{\´e}mico para comprender, explicar y proponer intervenciones a la disciplina.}, subject = {Stadtsanierung}, language = {es} } @phdthesis{Bock2010, author = {Bock, Sebastian}, title = {{\"U}ber funktionentheoretische Methoden in der r{\"a}umlichen Elastizit{\"a}tstheorie}, doi = {10.25643/bauhaus-universitaet.1417}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100407-15030}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {Die Behandlung von geometrischen Singularit{\"a}ten bei der L{\"o}sung von Randwertaufgaben der Elastostatik stellt erh{\"o}hte Anforderungen an die mathematische Modellierung des Randwertproblems und erfordert f{\"u}r eine effiziente Auswertung speziell angepasste Berechnungsverfahren. Diese Arbeit besch{\"a}ftigt sich mit der systematischen Verallgemeinerung der Methode der komplexen Spannungsfunktionen auf den Raum, wobei der Schwerpunkt in erster Linie auf der Begr{\"u}ndung des mathematischen Verfahrens unter besonderer Ber{\"u}cksichtigung der praktischen Anwendbarkeit liegt. Den theoretischen Rahmen hierf{\"u}r bildet die Theorie quaternionenwertiger Funktionen. Dementsprechend wird die Klasse der monogenen Funktionen als Grundlage verwendet, um im ersten Teil der Arbeit ein r{\"a}umliches Analogon zum Darstellungssatz von Goursat zu beweisen und verallgemeinerte Kolosov-Muskhelishvili Formeln zu konstruieren. Im Hinblick auf die vielf{\"a}ltigen Anwendungsbereiche der Methode besch{\"a}ftigt sich der zweite Teil der Arbeit mit der lokalen und globalen Approximation von monogenen Funktionen. Hierzu werden vollst{\"a}ndige Orthogonalsysteme monogener Kugelfunktionen konstruiert, infolge dessen neuartige Darstellungen der kanonischen Reihenentwicklungen (Taylor, Fourier, Laurent) definiert werden. In Analogie zu den komplexen Potenz- und Laurentreihen auf der Grundlage der holomorphen z-Potenzen werden durch diese monogenen Orthogonalreihen alle wesentlichen Eigenschaften bez{\"u}glich der hyperkomplexen Ableitung und der monogenen Stammfunktion verallgemeinert. Anhand repr{\"a}sentativer Beispiele werden die qualitativen und numerischen Eigenschaften der entwickelten funktionentheoretischen Verfahren abschließend evaluiert. In diesem Kontext werden ferner einige weiterf{\"u}hrende Anwendungsbereiche im Rahmen der r{\"a}umlichen Funktionentheorie betrachtet, welche die speziellen Struktureigenschaften der monogenen Potenz- und Laurentreihenentwicklungen ben{\"o}tigen.}, subject = {Lineare Elastizit{\"a}tstheorie}, language = {de} } @phdthesis{Bockelmann, author = {Bockelmann, Leo}, title = {Zeit, dass sich was dreht. Windenergieanlagen aus denkmalkundlicher Perspektive}, doi = {10.25643/bauhaus-universitaet.4543}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211210-45439}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {233}, abstract = {Knapp 30.000 Windenergieanlagen zwischen Nordsee und Alpen lassen un{\"u}bersehbar erkennen, dass sich unser Energiesystem in einer umfassenden Transformation befindet. Allenthalben erf{\"a}hrt diese Entwicklung eine breite und kontroverse Rezeption und auch in der Denkmalpflege werden Windenergieanlagen aufgrund ihrer mitunter erheblichen Auswirkungen auf die Landschaft noch {\"u}berwiegend als St{\"o}rung wahrgenommen. Diese Arbeit nimmt dagegen die historische Entwicklung in den Blick und pl{\"a}diert daf{\"u}r, Windenergieanlagen als bedeutendes Kulturerbe zu verstehen. Angesichts des Voranschreitens der Energiewende wird angenommen, dass gerade {\"a}lteren Modellen als baulichen Zeugnissen umfangreicher energiepolitischer Ver{\"a}nderungen seit den 1970er Jahren eine hohe Bedeutung zugeschrieben werden kann. Daher besteht das Ziel darin, Windenergieanlagen herauszuarbeiten, welche als hervorragende Zeugnisse der Entwicklung der Windenergienutzung in Deutschland zu bewerten sind. Zur Ann{\"a}herung werden diese zun{\"a}chst als Untersuchungsgegenstand typologisch abgegrenzt. Eine wesentliche Besonderheit von Windenergieanlagen besteht darin, dass sie im Verh{\"a}ltnis zur eigentlichen Fl{\"a}chenversiegelung durch ihre vertikale Struktur erhebliche visuelle Auswirkungen auf die Landschaft haben. Anschließend wird die Entwicklung der Windenergienutzung seit den 1970er Jahren genauer betrachtet, welche insgesamt nicht linear verlief und von vielen Konflikten gekennzeichnet ist. Diese muss im Kontext eines wachsenden Umweltbewusstseins verstanden werden, das umfangreiche energiepolitische Ver{\"a}nderungen zur Folge hatte. Auf dieser Grundlage werden schließlich in einer denkmalkundlichen Reihenuntersuchung Windenergieanlagen herausgearbeitet, welche in hervorragender Weise von der Entwicklung zeugen. Die Auswahl bleibt allerdings mit sechs Objekten im Verh{\"a}ltnis zum Gesamtbestand von knapp 30.000 Anlagen relativ beschr{\"a}nkt, weil das auf die Abgrenzung von Besonderheiten ausgelegte etablierte Denkmalverst{\"a}ndnis bei einem zeitlich so dichten Bestand gleichartiger Bauwerke an eine Grenze kommt. Abschließend werden m{\"o}gliche Erhaltungsperspektiven sowie denkmaltheoretische und -praktische Schlussfolgerungen diskutiert. Dabei ist unbedingt ein Erhalt am Ursprungsstandort anzustreben, wobei im Einzelfall entschieden werden muss, ob Belange des Funktions- oder Substanzerhaltes h{\"o}her zu gewichten sind. Die skizzierten Auswahlprobleme regen dar{\"u}ber hinaus zur Diskussion zus{\"a}tzlicher denkbarer Bewertungskategorien an, wobei sich insbesondere die gesellschaftliche Wahrnehmung und {\"o}kologische Werte aufdr{\"a}ngen. Zudem kann f{\"u}r die st{\"a}rkere Ber{\"u}cksichtigung von Funktionszusammenh{\"a}ngen bei der Betrachtung technischer Infrastruktur in der Denkmalpflege pl{\"a}diert werden. Insgesamt f{\"u}hrt die denkmalkundliche Auseinandersetzung mit Windenergieanlagen damit weit {\"u}ber die Herausarbeitung einzelner Objekte hinaus und macht eindr{\"u}cklich auf aktuelle Herausforderungen der Denkmalpflege und dar{\"u}ber hinaus aufmerksam.}, subject = {Industriekultur}, language = {de} } @phdthesis{Bode2009, author = {Bode, Kay-Andr{\´e}}, title = {Aspekte der koh{\"a}siven und adh{\"a}siven Eigenschaften von PCC}, doi = {10.25643/bauhaus-universitaet.1385}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090513-14696}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {Die Abk{\"u}rzung PCC bezieht sie sich hier auf Polymer modified Cement Concrete, also mit Kunststoffen modifizierte M{\"o}rtel und Betone. Hierf{\"u}r hat sich diese Abk{\"u}rzung auch international durchgesetzt. Sie bezeichnet Baustoffe, die neben dem mineralischen Bindemittel Zement auch Kunststoffe enthalten. Zement und Kunststoff erzielen im sp{\"a}teren M{\"o}rtel bzw. Beton eine gemeinschaftliche Bindemittelwirkung. Wiederholter Gegenstand von Schadensf{\"a}llen ist das Versagen des Haftverbundes zu anderer Bausubstanz. Da PCC h{\"a}ufig als d{\"u}nne Schutzschicht auf vorhandenen Beton aufgetragen werden, f{\"u}hrt ein Versagen der Adh{\"a}sion fr{\"u}her oder sp{\"a}ter auch zu einem Versagen dieser Schutzfunktion. Umgekehrt kann ein Versagen des Schutzes infolge von Rissen im PCC auch im Nachhinein zum Abl{\"o}sen der Beschichtung f{\"u}hren. Urs{\"a}chlich f{\"u}r dieses koh{\"a}sive Versagen sind dabei i. d. R. die Auswahl falscher bzw. nicht aufeinander abgestimmter Baustoffsysteme oder schlicht Verarbeitungsfehler. Das Ziel dieser Arbeit war es zu untersuchen, welchen Einfluss die koh{\"a}siven und adh{\"a}siven Eigenschaften von PCC auf deren Dauerhaftigkeit, insbesondere bei der Anwendung als Beschichtungsmaterial, haben. Dazu wurden vier maßgebliche Schwerpunkte bearbeitet. Eine zentrale Rolle f{\"u}r die Dauerhaftigkeit eines Beschichtungsmaterials spielt dessen L{\"a}ngen{\"a}nderungsverhalten. Der Betrag der positiven und negativen L{\"a}ngen{\"a}nderungen ist bestimmend f{\"u}r die Spannungen, die im Beschichtungsmaterial entstehen k{\"o}nnen. Sind die auftretenden Spannungen h{\"o}her als die Zugfestigkeit des PCC erfolgt der Spannungsabbau durch Risse. Es kommt also zum Koh{\"a}sionsversagen im M{\"o}rtel. Wird der PCC als Beschichtungsmaterial genutzt, werden die Spannungen im Idealfall {\"u}ber die Verbundebene zum Beschichtungsuntergrund {\"u}bertragen. {\"U}bersteigen dabei diese Spannungen die maximal aufnehmbaren Verbundspannungen, kommt es zum Adh{\"a}sionsversagen zwischen Beschichtung und Untergrund. In Modellversuchen werden die Effekte des L{\"a}ngen{\"a}nderungsverhaltens kunststoffmodifizierter Zementsteine auf den Haftverbund zu einer Gesteinsk{\"o}rnung untersucht. Dadurch werden R{\"u}ckschl{\"u}sse auf die Koh{\"a}sion innerhalb der PCC durch die Beschreibung des adh{\"a}siven Verbundes zwischen Zementsteinmatrix und Gesteinsk{\"o}rnung gezogen. Neben der L{\"a}ngen{\"a}nderung sind auch die Festigkeitseigenschaften der PCC bedeutsam f{\"u}r deren Dauerhaftigkeit. Es werden die Festigkeitseigenschaften kunststoffmodifizierter M{\"o}rtel und Betone nicht nur von der mechanischen Seite betrachtet. Der Focus liegt vielmehr auf der Beschreibung der durch die Kunststoffe beeinflussten koh{\"a}siven Eigenschaften bei mechanischer Belastung. Es wird das Verhalten der polymeren Matrix nach einer Kurzzeitbelastung untersucht. Damit werden die Vorg{\"a}nge, die letztlich zu einer Beeinflussung der Festigkeitseigenschaften f{\"u}hren, dargestellt. In diesem Zusammenhang wird auch der Einfluss der Temperatur auf die Festigkeit der PCC betrachtet. Die Untersuchung des Frost-Taumittel-Widerstandes mittels CDF- bzw. CIF-Verfahrens ist eine gute M{\"o}glichkeit, neben der Beurteilung der Dauerhaftigkeit auch R{\"u}ckschl{\"u}sse auf die koh{\"a}siven als auch, im mikroskopischen Maßstab betrachtet, die adh{\"a}siven Eigenschaften der PCC zu ziehen. Damit ist gemeint, dass die Koh{\"a}sion von PCC durch deren adh{\"a}sive Eigenschaften zwischen kunststoffmodifizierter Zementsteinmatrix und Gesteinsk{\"o}rnern maßgeblich bestimmt wird. Einerseits kann bei starkem Abfall des relativen dynamischen E-Moduls von einer geringeren Koh{\"a}sion des PCC ausgegangen werden. Dies w{\"u}rde dann bei einem M{\"o}rtel eher zu Rissen f{\"u}hren, {\"u}ber die wiederum betonaggressive Medien eindringen k{\"o}nnen. Im Gegensatz dazu deutet ein konstant bleibender relativer dynamischer E-Modul auf eine hohe Koh{\"a}sion und damit, bei Anwendung des PCC als Beschichtungsmaterial, auf ein h{\"o}heres adh{\"a}sives Versagensrisiko der Beschichtung hin. Andererseits stellt eine h{\"o}here Abwitterung, also sozusagen das schichtenweise koh{\"a}sive Versagen, eine Gefahr bei d{\"u}nnen Beschichtungen dar. Dies k{\"o}nnte noch durch die Anwendung anderer Taumittel (z. B. organischer) verst{\"a}rkt werden. Unter diesen Gesichtspunkten wurden Untersuchungen auf der Basis des CDF-Testes sowie zur L{\"o}sungsaufnahmef{\"a}higkeit der PCC durchgef{\"u}hrt. Der adh{\"a}sive Verbund von PCC zu Beton ist von vielen Faktoren abh{\"a}ngig. Bisher kaum betrachtet wurde die Art des Aufbringens oder der Einfluss der Probengeometrie bei Laborversuchen. Diese sowie der Einfluss einer Salzbelastung des Untergrundes bzw. der Beschichtung wurden untersucht. Ein Teil der durchgef{\"u}hrten Untersuchungen wurde im Rahmen des Teilprojektes B3 „Dauerhaftigkeit polymermodifizierter M{\"o}rtel und Betone" des von der DFG gef{\"o}rderten Sonderforschungsbereiches 524 „Werkstoffe und Konstruktionen f{\"u}r die Revitalisierung von Bau-werken" realisiert.}, subject = {Betonzusatz}, language = {de} } @phdthesis{Bolle1999, author = {Bolle, Guido}, title = {Zur Bewertung des Belastungsgrades biegebeanspruchter Stahlbetonkonstruktionen anhand von Last-Verformungs-Informationen}, doi = {10.25643/bauhaus-universitaet.22}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040212-245}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1999}, abstract = {Die Beurteilung des Beanspruchungsgrades w{\"a}hrend eines Versuchs zur experimentellen Tragsicherheitsbewertung erfolgt auf Grundlage der zeitgleich dargestellten Beanspruchungs-Verformungsbeziehung. F{\"u}r ein fr{\"u}hzeitiges Erkennen von Strukturver{\"a}nderungen (Rißbildung/Plastizierung) eignen sich jedoch insbesondere Energiebetrachtungen w{\"a}hrend der verschiedenen Versuchsphasen, da diese das Zusammenspiel von Einwirkung und Tragwerksreaktion vollst{\"a}ndig widerspiegeln und auch geringe irreversible Struktur{\"a}nderungen immer mit Energiedissipation verbunden sind. In der Arbeit wird der Versuchsgrenzlastindikator deltaS (normierte Strukturver{\"a}nderungsenergie) vorgestellt. Dieser Parameter erfaßt nur die bei Belastungsversuchen interessanten Strukturver{\"a}nderungen und erm{\"o}glicht damit eine objektive Beurteilung des eingereichten Beanspruchungsgrades und eine zuverl{\"a}ssige Identifikation der Versuchsgrenzlast. Anhand von Versuchen im Labor und am realen Bauwerk wird die Anwendung des Indikators erl{\"a}utert und seine Eignung nachgewiesen.}, subject = {Stahlbetonkonstruktion}, language = {de} } @phdthesis{Bollmann2000, author = {Bollmann, Katrin}, title = {Ettringitbildung in nicht w{\"a}rmebehandelten Betonen}, doi = {10.25643/bauhaus-universitaet.61}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040311-645}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2000}, subject = {Zementbeton}, language = {de} } @phdthesis{Borth2002, author = {Borth, Olaf}, title = {Absch{\"a}tzung der Tragf{\"a}higkeit von Queranschl{\"u}ssen an Tr{\"a}gern aus Voll- und Brett-schichtholz im Rahmen der Linear-Elastischen Bruchmechanik}, doi = {10.25643/bauhaus-universitaet.23}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040212-250}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2002}, abstract = {In der Arbeit werden M{\"o}glichkeiten aufgezeigt, die Tragf{\"a}higkeit von Queranschl{\"u}ssen an Tr{\"a}gern aus Voll- und Brettschichtholz abzusch{\"a}tzen. Die Tragf{\"a}higkeit dieser Anschl{\"u}sse wird nicht allein durch die Tragf{\"a}higkeit der mechanischen Verbindungsmittel selbst begrenzt. Die Tragf{\"a}higkeit der Verbindungsmittel wird in dieser Arbeit a priori als hinreichend betrachtet. Sie kann z. B. nach der Theorie von JOHANSEN bestimmt werden. Insbesondere bei solchen Anschl{\"u}ssen, welche unterhalb der Schwerachse von Tr{\"a}gern angeordnet sind, erzeugen die durch die Verbindungsmittel eingeleiteten Lasten Beanspruchungen, welche die Tragf{\"a}higkeiten dieser Anschl{\"u}sse bestimmen. Die Absch{\"a}tzung der Tragf{\"a}higkeit auf der Basis von Spannungen hat bei dieser Problemstellung methodische Schw{\"a}chen. Bauteile aus Holz k{\"o}nnen unter Gebrauchsbedingungen rißbehaftet sein. Mit den Methoden der Linear-Elastischen Bruchmechanik kann die Tragf{\"a}higkeit von rißbehafteten Bauteilen beurteilt werden. Es werden wegen der Vielzahl m{\"o}glicher Ausf{\"u}hrungvarianten lediglich Anschl{\"u}sse betrachtet, welche mit stiftf{\"o}rmigen Verbindungsmitteln hergestellt werden. Zur Bestimmung bruchmechanischer Kennwerte werden numerische Methoden angewendet. Es werden wichtige Parameter dieser Anschl{\"u}sse untersucht und hinsichtlich ihrer Ber{\"u}cksichtigung im Rechenmodell bewertet. Zur Verifizierung des Rechenmodells werden Vergleiche mit experimentellen Untersuchungen anderer Wissenschaftler angestellt. Der Einsatz verschiedener Versagenskriterien wird diskutiert. Schließlich wird ein formaler Zusammenhang zur Absch{\"a}tzung der Tragf{\"a}higkeit f{\"u}r einzelne Verbindungsmittel hergestellt. Weiterhin wird die Tragf{\"a}higkeit von praxis{\"u}blichen Anschl{\"u}ssen anhand einfacher Zusammenh{\"a}nge aufgezeigt.}, subject = {Tr{\"a}ger}, language = {de} } @phdthesis{Brandstetter2006, author = {Brandstetter, Thomas}, title = {Kr{\"a}fte messen. Die Maschine von Marly und die Kultur der Technik 1680-1840}, doi = {10.25643/bauhaus-universitaet.760}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060702-7984}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2006}, abstract = {Die Arbeit besch{\"a}ftigt sich mit der Entstehung eines {\"o}konomischen Kraftmaßes am Beispiel der Maschine von Marly im Zeitraum von ca. 1680 bis 1840. Die Leitthese der Dissertation besagt, dass vom 17. zum 19. Jahrhundert eine grundlegende Transformation des Maschinenbegriffs stattfand, die als {\"U}bergang vom Substanzbegriff zum Funktionsbegriff der Maschine bezeichnet werden kann. Im 17. Jahrhundert wurden mechanische Apparate als in sich geschlossene, selbstbez{\"u}gliche Strukturen aufgefasst. Als anschaulich erfahrbare Objekte konnten sie als Bildgeber dienen, die mittels des Verfahrens der Strukturanalogie Erkl{\"a}rungsmuster f{\"u}r verschiedenste Ph{\"a}nomene (K{\"o}rper, Staat, Welt) boten. Demzufolge galten sie als selbstevident: sie waren erkl{\"a}rend und mussten selbst nicht erkl{\"a}rt werden. Ihr etwaiger Zweck und ihre Einbettung in gesellschaftliche Zusammenh{\"a}nge spielten dabei keine Rolle. Wie anhand der Beschreibungen und Darstellungen aus jener Zeit nachgewiesen werden kann, wurde die Maschine von Marly innerhalb dieser Episteme als architektonisches Objekt wahrgenommen, bei dem vor allem das Zusammenspiel der einzelnen Elemente Aufmerksamkeit erregte. Wie andere Maschinen auch stand sie unter dem Primat der Sichtbarkeit. Man war davon {\"u}berzeugt, dass die Eigenschaften einer Maschine von der strukturellen Anordnung ihrer Bauteile abhingen und glaubte, ihre Qualit{\"a}t an ihrer Gestalt ablesen zu k{\"o}nnen. Ab der Mitte des 18. Jahrhunderts tauchte die Maschine von Marly in den Schriften physiokratischer Autoren auf. Zuerst diente sie dort als Beispiel f{\"u}r die Verschwendungssucht Louis' XIV. und als Metapher f{\"u}r eine schlechte Einrichtung des Staates. Doch zunehmend begann man, sie auch in ihrer Faktizit{\"a}t als technisch-politisches Objekt zu begreifen. Man kritisierte ihre aktuelle Nutzung und schlug andere M{\"o}glichkeiten ihrer Verwendung vor, etwa die Bew{\"a}sserung von Feldern oder die st{\"a}dtische Trinkwasserversorgung. Damit war die Maschine von Marly nicht l{\"a}nger ein Modell f{\"u}r die Einrichtung des Staates, das nur am Maßstab der immanenten Perfektion beurteilt werden konnte. Vielmehr war sie nun ein Instrument der Regierung, das sich als Teil eines staatlich verfassten Gemeinwesens verantworten musste. Als solches wurde sie auch zu einem bevorzugten Gegenstand aufkl{\"a}rerischer Reformprojekte. Das zeigt sich besonders deutlich am Wettbewerb, den die Pariser Akademie der Wissenschaften 1784-1786 organisiert hatte und der Vorschl{\"a}ge zur Verbesserung oder Ersetzung der Maschine von Marly zum Gegenstand hatte. Die Auswertung der mehr als 100 eingereichten Projekte und Memoranden erm{\"o}glicht einen einzigartigen Blick auf die Hoffnungen und W{\"u}nsche, die Ende des 18. Jahrhunderts an die Erfindung technischer Ger{\"a}te gekoppelt waren. Um 1800 kann man die allm{\"a}hliche Entstehung eines Funktionsbegriffs der Maschine bemerken. Lazare Carnots Essai sur les machines en g{\´e}n{\´e}ral, der eine in der Sprache der Algebra artikulierte Definition der Maschine beinhaltete, trug maßgeblich dazu bei, die Anschaulichkeit zugunsten eines operativen Symbolismus zu delegitimieren. Erst dadurch war die Formulierung eines Effizienzkalk{\"u}ls m{\"o}glich. Erg{\"a}nzt wurde diese Formalisierung durch den Diskurs der Industrialisierung, in dem technische Apparate zunehmend als Produktionsmittel verstanden wurden. Die Maschine von Marly war ein wichtiger Schauplatz f{\"u}r die Entstehung eines {\"o}konomischen Kraftmaßes. Nicht nur wurden dort Experimente mit verschiedenen Messinstrumenten (Dynamometern) durchgef{\"u}hrt, auch diente sie Joseph Montgolfier als Beispiel um zu beweisen, dass Kraft als Geldwert ausgedr{\"u}ckt werden k{\"o}nne. In den ersten Jahrzehnten des 19. Jahrhundert wurden Maschinen schließlich relational als Positionen innerhalb eines nationalen Produktionssystems definiert. Sie galten als Krafttransformatoren, bei denen ein bestimmter Input von ‚force motrice' einen entsprechenden Output von ‚travail utile' ergeben w{\"u}rde. Ihre vornehmlichste Aufgabe war die m{\"o}glichst effiziente Ausnutzung der Kraftressourcen. Den vorl{\"a}ufigen Endpunkt erreichte die Entstehung des {\"o}konomischen Kraftmaßes um 1830 mit der Formulierung des Begriffs der ‚mechanischen Arbeit'.}, subject = {Technik / Geschichte}, language = {de} } @phdthesis{Brasil2011, author = {Brasil, Daniela}, title = {EXPERIMENTING WITH THE URBAN EXPERIENCE: Rio, Lisbon and Weimar. A (re)search for creative collaborations and active exercises of citizenship}, doi = {10.25643/bauhaus-universitaet.1456}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110811-15525}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2011}, abstract = {This practice-based research examines platforms and encounters that have a participatory character as a strategy to create lived and shared experiences where new forms of appropriation of the city can emerge. The selected case studies propose and initiate certain urban experiences that induce changes in perception, the exchange of perspectives, and that denaturalize habits and patterns of behavior. I suggest that when these sensitive experiences become imprinted in body memory, they can empower citizens to have more active, creative, and/or critical attitudes towards their environments. Searching for new repertoires of everyday practices that contest commodification of both the body and the city, this thesis is oriented towards open-ended processes of constructing mentalities rather than those of planning changes on the material conditions of public space. It uses forms of academic investigation that merge intellectual debate and experimental practice, joining art, urbanism and social engaged practices in an extradisciplinary (Howes 2007) attitude towards the city. Based on the materials generated by the case studies (combining theoretical knowledge with artistic sensibility), the affective and corporeal involvement of researchers in the situations they analyze and co-create, is sustained in opposition to the traditional academic critical distance.}, subject = {Erlebnis}, language = {en} } @phdthesis{Brauns2003, author = {Brauns, J{\"o}rg}, title = {»Schaupl{\"a}tze«. Untersuchungen zur Theorie und Geschichte der Dispositive visueller Medien}, doi = {10.25643/bauhaus-universitaet.75}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040317-785}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2003}, abstract = {Das zentrale Problem der Arbeit ist die Untersuchung der Rolle von Orten und R{\"a}umen f{\"u}r die Evolution bestimmter visueller Medien im 19. Jahrhundert. Die historische Schwelle wird mit der Erfindung des Panoramas, der Geburt der Passage und der Reform der Bibliothek um 1800 markiert. Ausgehend von der Systemtheorie Luhmanns und dem franz{\"o}sischen Poststrukturalismus (Baudry, Lyotard, Foucault) entwickelt die Arbeit dazu einen Begriff des Dispositivs, der zur Untersuchung des Verh{\"a}ltnisses von Objekt, Betrachter und Apparat verwendet wird. Im Mittelpunkt steht dabei das Wechselverh{\"a}ltnis von Wahrnehmung und Kommunikation. Mit Bezug auf Kants »Kritik der Urteilskraft« wird dabei ein neuer Vorschlag f{\"u}r den Code des Kunstsystems - gestaltet/nicht gestaltet - entwickelt. Die zentralen Begriffe f{\"u}r die Definition des Dispositivs sind Abschirmung, Distanzierung und Inszenierung. Damit wird der Versuch unternommen, die Frage des Raumes in der Systemtheorie zu kl{\"a}ren. Die historische Analyse beschreibt die Entwicklung vom Theater zum Kino im 19. und fr{\"u}hen 20. Jahrhundert und fokussiert dabei vor allem auf das Festspielhaus Wagners in Bayreuth. Abschließend wird der Beitrag der Warenh{\"a}user und des Schaufensters zur Evolution des Wirtschaftsystems untersucht.}, subject = {Soziologie / Systemtheorie}, language = {de} } @phdthesis{Brehm2011, author = {Brehm, Maik}, title = {Vibration-based model updating: Reduction and quantification of uncertainties}, doi = {10.25643/bauhaus-universitaet.1465}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110926-15553}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2011}, abstract = {Numerical models and their combination with advanced solution strategies are standard tools for many engineering disciplines to design or redesign structures and to optimize designs with the purpose to improve specific requirements. As the successful application of numerical models depends on their suitability to represent the behavior related to the intended use, they should be validated by experimentally obtained results. If the discrepancy between numerically derived and experimentally obtained results is not acceptable, a model revision or a revision of the experiment need to be considered. Model revision is divided into two classes, the model updating and the basic revision of the numerical model. The presented thesis is related to a special branch of model updating, the vibration-based model updating. Vibration-based model updating is a tool to improve the correlation of the numerical model by adjusting uncertain model input parameters by means of results extracted from vibration tests. Evidently, uncertainties related to the experiment, the numerical model, or the applied numerical solving strategies can influence the correctness of the identified model input parameters. The reduction of uncertainties for two critical problems and the quantification of uncertainties related to the investigation of several nominally identical structures are the main emphases of this thesis. First, the reduction of uncertainties by optimizing reference sensor positions is considered. The presented approach relies on predicted power spectral amplitudes and an initial finite element model as a basis to define the assessment criterion for predefined sensor positions. In combination with geometry-based design variables, which represent the sensor positions, genetic and particle swarm optimization algorithms are applied. The applicability of the proposed approach is demonstrated on a numerical benchmark study of a simply supported beam and a case study of a real test specimen. Furthermore, the theory of determining the predicted power spectral amplitudes is validated with results from vibration tests. Second, the possibility to reduce uncertainties related to an inappropriate assignment for numerically derived and experimentally obtained modes is investigated. In the context of vibration-based model updating, the correct pairing is essential. The most common criterion for indicating corresponding mode shapes is the modal assurance criterion. Unfortunately, this criterion fails in certain cases and is not reliable for automatic approaches. Hence, an alternative criterion, the energy-based modal assurance criterion, is proposed. This criterion combines the mathematical characteristic of orthogonality with the physical properties of the structure by modal strain energies. A numerical example and a case study with experimental data are presented to show the advantages of the proposed energy-based modal assurance criterion in comparison to the traditional modal assurance criterion. Third, the application of optimization strategies combined with information theory based objective functions is analyzed for the purpose of stochastic model updating. This approach serves as an alternative to the common sensitivity-based stochastic model updating strategies. Their success depends strongly on the defined initial model input parameters. In contrast, approaches based on optimization strategies can be more flexible. It can be demonstrated, that the investigated nature inspired optimization strategies in combination with Bhattacharyya distance and Kullback-Leibler divergence are appropriate. The obtained accuracies and the respective computational effort are comparable with sensitivity-based stochastic model updating strategies. The application of model updating procedures to improve the quality and suitability of a numerical model is always related to additional costs. The presented innovative approaches will contribute to reduce and quantify uncertainties within a vibration-based model updating process. Therefore, the increased benefit can compensate the additional effort, which is necessary to apply model updating procedures.}, subject = {Dynamik}, language = {en} } @phdthesis{Bruns2010, author = {Bruns, Erich}, title = {Adaptive Image Classification on Mobile Phones}, doi = {10.25643/bauhaus-universitaet.1421}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100707-15092}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {The advent of high-performance mobile phones has opened up the opportunity to develop new context-aware applications for everyday life. In particular, applications for context-aware information retrieval in conjunction with image-based object recognition have become a focal area of recent research. In this thesis we introduce an adaptive mobile museum guidance system that allows visitors in a museum to identify exhibits by taking a picture with their mobile phone. Besides approaches to object recognition, we present different adaptation techniques that improve classification performance. After providing a comprehensive background of context-aware mobile information systems in general, we present an on-device object recognition algorithm and show how its classification performance can be improved by capturing multiple images of a single exhibit. To accomplish this, we combine the classification results of the individual pictures and consider the perspective relations among the retrieved database images. In order to identify multiple exhibits in pictures we present an approach that uses the spatial relationships among the objects in images. They make it possible to infer and validate the locations of undetected objects relative to the detected ones and additionally improve classification performance. To cope with environmental influences, we introduce an adaptation technique that establishes ad-hoc wireless networks among the visitors' mobile devices to exchange classification data. This ensures constant classification rates under varying illumination levels and changing object placement. Finally, in addition to localization using RF-technology, we present an adaptation technique that uses user-generated spatio-temporal pathway data for person movement prediction. Based on the history of previously visited exhibits, the algorithm determines possible future locations and incorporates these predictions into the object classification process. This increases classification performance and offers benefits comparable to traditional localization approaches but without the need for additional hardware. Through multiple field studies and laboratory experiments we demonstrate the benefits of each approach and show how they influence the overall classification rate.}, subject = {Kontextbezogenes System}, language = {en} } @phdthesis{Bubner2006, author = {Bubner, Andr{\´e}}, title = {Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnh{\"a}usern in Stahlbauweise}, doi = {10.25643/bauhaus-universitaet.808}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20070423-8580}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2006}, abstract = {Modelle bilden die Grundlage der Planung. Sie repr{\"a}sentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenh{\"a}nge bez{\"u}glich der darin abgebildeten Aspekte. Diese Abh{\"a}ngigkeiten werden in der praktischen Planungsbearbeitung gegenw{\"a}rtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen ber{\"u}cksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften f{\"u}hrt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Anspr{\"u}chen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine {\"u}ber den Zweck der Bereitstellung ausgew{\"a}hlter Informationen zum Bauwerk und der Unterst{\"u}tzung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnh{\"a}usern in Stahlbauweise gef{\"u}hrt.}, subject = {Modellierung}, language = {de} } @phdthesis{Budarapu, author = {Budarapu, Pattabhi Ramaiah}, title = {Adaptive multiscale methods for fracture}, doi = {10.25643/bauhaus-universitaet.2391}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150507-23918}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour. Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere. Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks. Key contributions The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture. A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable. A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed.}, subject = {Material}, language = {en} } @phdthesis{Bunte, author = {Bunte, Andreas}, title = {Entwicklung einer ontologiebasierten Beschreibung zur Erh{\"o}hung des Automatisierungsgrades in der Produktion}, doi = {10.25643/bauhaus-universitaet.4315}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201215-43156}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {189}, abstract = {Die zu beobachtenden k{\"u}rzeren Produktlebenszyklen und eine schnellere Marktdurchdringung von Produkttechnologien erfordern adaptive und leistungsf{\"a}hige Produktionsanlagen. Die Adaptivit{\"a}t erm{\"o}glicht eine Anpassung der Produktionsanlage an neue Produkte, und die Leistungsf{\"a}higkeit der Anlage stellt sicher, dass ausreichend Produkte in kurzer Zeit und zu geringen Kosten hergestellt werden k{\"o}nnen. Durch eine Modularisierung der Produktionsanlage kann die Adaptivit{\"a}t erreicht werden. Jedoch erfordert heutzutage jede Adaption manuellen Aufwand, z.B. zur Anpassung von propriet{\"a}ren Signalen oder zur Anpassung {\"u}bergeordneter Funktionen. Dadurch sinkt die Leistungsf{\"a}higkeit der Anlage. Das Ziel dieser Arbeit ist es, die Interoperabilit{\"a}t in Bezug auf die Informationsverwendung in modularen Produktionsanlagen zu gew{\"a}hrleisten. Dazu werden Informationen durch semantische Modelle beschrieben. Damit wird ein einheitlicher Informationszugriff erm{\"o}glicht, und {\"u}bergeordnete Funktionen erhalten Zugriff auf alle Informationen der Produktionsmodule, unabh{\"a}ngig von dem Typ, dem Hersteller und dem Alter des Moduls. Dadurch entf{\"a}llt der manuelle Aufwand bei Anpassungen des modularen Produktionssystems, wodurch die Leistungsf{\"a}higkeit der Anlage gesteigert und Stillstandszeiten reduziert werden. Nach dem Ermitteln der Anforderungen an einen Modellierungsformalismus wurden potentielle Formalismen mit den Anforderungen abgeglichen. OWL DL stellte sich als geeigneter Formalismus heraus und wurde f{\"u}r die Erstellung des semantischen Modells in dieser Arbeit verwendet. Es wurde exemplarisch ein semantisches Modell f{\"u}r die drei Anwendungsf{\"a}lle Interaktion, Orchestrierung und Diagnose erstellt. Durch einen Vergleich der Modellierungselemente von unterschiedlichen Anwendungsf{\"a}llen wurde die Allgemeing{\"u}ltigkeit des Modells bewertet. Dabei wurde gezeigt, dass die Erreichung eines allgemeinen Modells f{\"u}r technische Anwendungsf{\"a}lle m{\"o}glich ist und lediglich einige Hundert Begriffe ben{\"o}tigt. Zur Evaluierung der erstellten Modelle wurde ein wandlungsf{\"a}higes Produktionssystem der SmartFactoryOWL verwendet, an dem die Anwendungsf{\"a}lle umgesetzt wurden. Dazu wurde eine Laufzeitumgebung erstellt, die die semantischen Modelle der einzelnen Module zu einem Gesamtmodell vereint, Daten aus der Anlage in das Modell {\"u}bertr{\"a}gt und eine Schnittstelle f{\"u}r die Services bereitstellt. Die Services realisieren {\"u}bergeordnete Funktionen und verwenden die Informationen des semantischen Modells. In allen drei Anwendungsf{\"a}llen wurden die semantischen Modelle korrekt zusammengef{\"u}gt und mit den darin enthaltenen Informationen konnte die Aufgabe des jeweiligen Anwendungsfalles ohne zus{\"a}tzlichen manuellen Aufwand gel{\"o}st werden.}, subject = {Ontologie}, language = {de} } @phdthesis{Boelling2007, author = {B{\"o}lling, Lars}, title = {Das Bild der Zwischenstadt. Dekodierung und Inszenierung "r{\"a}umlicher Identit{\"a}t" als Potenzial zur Qualifizierung der verst{\"a}dterten Landschaft.}, doi = {10.25643/bauhaus-universitaet.1377}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090122-14598}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2007}, abstract = {Die Arbeit „Das Bild der Zwischenstadt" sucht nach M{\"o}glichkeiten zur Qualifizierung der verst{\"a}dterten Landschaft, f{\"u}r die Thomas Sieverts den Begriff „Zwischenstadt" gepr{\"a}gt hat. Die Auseinandersetzung mit „r{\"a}umlicher Identit{\"a}t" steht dabei im Mittelpunkt: In deren Dekodierung und Inszenierung wird ein Potenzial erkannt, die Aufenthalts- und Erlebnisqualit{\"a}t der Zwischenstadt zu verbessern. Der Betrachtungsraum der Arbeit zwischen Frankfurt am Main und seinen prosperierenden Umlandgemeinden eignet sich in besonderer Weise, die „Anatomie der Zwischenstadt" zu dekodieren. Schicht f{\"u}r Schicht wird der Versuch unternommen, die eigene Sprache dieses Raumes zu entziffern. Dabei werden Methoden der Beschreibung und Darstellung entwickelt, die den spezifischen r{\"a}umlichen Eigenschaft der Zwischenstadt gerecht zu werden suchen. Die Ergebnisse dieser Auseinandersetzung lassen deutliche Transformationen in der Zwischenstadt erkennen und entheben sie aus ihrer vermeintlichen Eigenschaftslosigkeit. Orte mit Bedeutung, Zusammenh{\"a}nge und Raumgeschichten werden lesbar, es zeigen sich Ans{\"a}tze eigener Urbanit{\"a}t und Zentralit{\"a}t. Die Zwischenstadt hat sich von ihrer einseitigen Dependenz zur Kernstadt gel{\"o}st, tritt aber gleichzeitig in einen umfassenden Wandel, um sich ge{\"a}nderten Lebensformen und Bed{\"u}rfnissen anzupassen. {\"A}ltere, den Raum pr{\"a}gende Einfamilienhausgebiete und Großsiedlungen, aber auch monofunktionale Gewerbegebiete und die typischen suburbanen Einkaufszentren erf{\"u}llen keineswegs mehr automatisch die Wohnw{\"u}nsche und Anforderungen einer Dienstleistungs- und Freizeitgesellschaft. Die Arbeit greift die unverkennbare Transformation des Bildes der Zwischenstadt als Chance zur Qualifizierung dieses Raumes auf. Entwickelt werden Qualifizierungsmodelle, die der Tendenz zu Segregation und Abtrennung mit einer neuen Integrationskultur f{\"u}r die Zwischenstadt begegnen: Als pr{\"a}gender Lebensraum der Stadtregion muss die Zwischenstadt einen großen Teil der Bed{\"u}rfnisse Ihrer Bewohner und Benutzer an den Raum befriedigen. Zunehmend sind diese Bed{\"u}rfnisse nicht nur funktioneller Art, sondern werden {\"u}berlagert von einem Bed{\"u}rfnis nach Raumqualit{\"a}t, Verortung und Identifikationsm{\"o}glichkeiten. F{\"u}r diese Bed{\"u}rfnisse angemessene und auratische Raumbilder zu finden oder zu inszenieren, ist im Angesicht des Status Quo der Stadtlandschaft eine wichtige Herausforderung.}, subject = {Architektur}, language = {de} } @phdthesis{Camerin, author = {Camerin, Federico}, title = {THE ROLE OF THE GREAT PROPERTY IN THE EUROPEAN CITY-MAKING PROCESS IN THE LAST THIRD OF THE 20th CENTURY. MILITARY PROPERTY AS REFERENCE}, doi = {10.25643/bauhaus-universitaet.4201}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200714-42018}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {453}, abstract = {The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called 'great property' in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being 'capital in land', I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century. I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new 'areas of centrality' intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality.}, subject = {Stadtplanung}, language = {en} } @phdthesis{CamposMedina, author = {Campos Medina, Fernando}, title = {The Role of Individuals in Socio-Urban Exclusion : A case study on the School Institution in Santiago de Chile}, doi = {10.25643/bauhaus-universitaet.2388}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150505-23888}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {184}, abstract = {This is a work concerned with the increasing processes of social exclusion in cities nowadays. In approaching this phenomenon, the research highlights how people interact with their institutional environments. This is also, perhaps centrally, an investigation into the possibility to engage an individual perspective to understand the transformation in urban experience, which is orienting society to new uses and forms of exclusion. Following the perspective deployed by the so-called "sociology of individuals" in French sociology or "reengagement of agency" in the Anglo-Saxon world; I claim that individuals as well as collectives are gaining increasing power to question and re-organize institutions. This re-organization, in the case of socio-urban institutions, is no guarantee for major levels in integration, cohesion, and equality. Unfortunately, social institutions are becoming hard in its exclusionary capabilities under people intervention during the last four decades. I believe that urban sociology is a field of struggle between different perspectives competing to "make sense" of social phenomena in cities. The orientation supported in this research is just one on many and it follows the roots of people and their life experiences within cities and how they influence the processes that shape the city. The last formulation is possibly not the clearest, because as we all know, references to "inhabitants" are presented in every variant of urban sociology. Nevertheless, there are not many variants focusing on peoples' capability to influence institutional environments and by this way affecting the urban condition in which they find themselves. The particular institution selected for this study is the "School". This thesis is organized around two parts: part one includes the conceptual framework, methodological approach, and historical contextualization; part two describes three case studies produced to analyse the forms of and the relations between individuals and school institution. Part one starts from a premise: within the context of declining welfare State in the case of industrialized countries, an important part of urban studies focuses on economic and spatial restructuration. Confronted with the same situation, a part of social sciences shifts to the individuals' agency and social uncertainty. This research is embedded in the last theoretical description presented above, thus, because it tries to observe urban processes from the perspective of the individual and outside of developed economies. In this sense, Latin America represents a fundamental reference because urban conditions are historically marked by weak institutional arrangements to integrating people and large levels of marginality and exclusion among population. In this scenario individuals' practices around inclusion-exclusion have an essential meaning in everyday life. Part two offers three study cases in which the relation between individuals and school institutions has been analyzed for the Metropolitan area of Santiago de Chile (MAS). Using different methodological resources an exhaustive account on three levels is presented: i) geo-referencing State intervention in public policies connected with neighborhood and schools to understand the form and extent of socio-urban exclusion in MAS, ii) narrative biographies applied to parents with children attending primary school, in order to reconstruct the familiar process of school selection and describing its impacts on the stabilization of school as an exclusionary device, and iii) autoethnography to describe in detail the temporal dimension involved in stabilizing actions which reinforces social mechanisms of urban integration-exclusion during the last three decades in Chile. A key argument advanced by this research proposes that: the way in which the idea of integration is enacted by people in their biographical careers imprints changes on the institutional orientation and by this way, contributes to the reorganization urban life. The high level of social exclusion in Santiago de Chile is not accountable without considering transformation in all socio-urban institutions, especially the school. No family considers social integration with people from a low social, economical or cultural background as relevant orientation for school selection. This particularity of the Chilean social reality is not derivable from any big capitalistic or modernization processes impacting our cities. Within the light of the thesis findings, I conclude that socio-urban institutions logics must be reassessment under the influences of people actions and representations. I also propose a consideration to major complementarities between urban studies and urban-institutions analysis. The school institutions is not just a sectorial field reserved to the researcher in education, on the contrary, it represent a key entrance to address people's experience in their institutional urban environments. The re-emergence of social and urban movements in 2010, under the "Arab Spring" or the "Chilean Student Movements", is not only a demonstration in the public space as result of major global trends. These situations are in essence, for this research, individuals gathering together and calling for recognition and autonomy inside institutional environment that tends to reject them. Similar situation was the focus of the Latin American urban sociology research, within the focus on grassroots and urban social movements at the end of the 1960s and beginning of the 1970s. In both cases, socio-urban institutions, unaware of recognition requirements claimed by inhabitants, are not beyond individual or collective reach. My main concern is to show that socio-urban institutions are constantly re-shaped as a result of individual action, what makes the difference, is the spirit that we all, socially, imprint on the logics of our socio-urban institutions, moving them to inclusion or exclusion.}, subject = {urban studies}, language = {en} } @phdthesis{CarvajalBermudez, author = {Carvajal Berm{\´u}dez, Juan Carlos}, title = {New methods of citizen participation based on digital technologies}, doi = {10.25643/bauhaus-universitaet.4712}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220906-47124}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis. The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods. The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation.}, subject = {Partizipation}, language = {en} } @phdthesis{Cervantes, author = {Cervantes, Juan}, title = {Liberal or coordinated Sustainability? Environmental Governance in Different Capitalist Schemes: Germany and the United Kingdom.}, doi = {10.25643/bauhaus-universitaet.2334}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141218-23343}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {179}, abstract = {This research represents an effort made towards contribute to the critical thinking from an analysis of the hegemonic neoliberal ideology, which supports the idea of the end of history and the technocratic universalism which in turn implies the imposition of a single model of life, denying, in the name of realism and the end of utopias, any other alternative possibility. This makes it necessary to recover the critical thinking to analyze and understand the reality, thus overcoming the ideological barrier towards claiming that things can be otherwise. It is clear from this research that the discourse of sustainable development has unquestionably transformed the context and content of political activity in Europe. This discourse has exercised and obvious influence in the Governance processes, mainly because it has contributed to the introduction of a new political field, which was then promoted, either explicitly or implicitly by policy-makers, researchers on the field and practitioners during the last three decades. Though it may be bold to affirm that the discourse of sustainable development is the sole driver of these whole set of changes, there is no doubt that it has played a key part in the way in which the governance priorities have been handled in the European continent.}, language = {en} } @phdthesis{Chan, author = {Chan, Chiu Ling}, title = {Smooth representation of thin shells and volume structures for isogeometric analysis}, doi = {10.25643/bauhaus-universitaet.4208}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200812-42083}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {162}, abstract = {The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of "isoparametric", for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.}, subject = {Modellierung}, language = {en} } @phdthesis{Chawdhury, author = {Chawdhury, Samir}, title = {Partitioned Algorithms using Vortex Particle Methods for Fluid-Structure Interaction of Thin-walled Flexible Structures}, publisher = {arts + science weimar GmbH}, address = {Weimar}, isbn = {978-3-95773-297-2}, doi = {10.25643/bauhaus-universitaet.6404}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230703-64042}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {256}, abstract = {Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid-structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size.}, subject = {Windenergie}, language = {en} } @phdthesis{Che, author = {Che, Fei}, title = {The Socio-spatial transition of Beijing, in between communal space and associative space}, doi = {10.25643/bauhaus-universitaet.2436}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150721-24368}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {290}, abstract = {Abstract In this research, based on socio-spatiality as the starting point, it has conducted extensive city space analysis to advance a new urban social space theory. Resting upon the basis of traditional continent philosophy, this social space theory has adopted the structuration methods, at the same time trying to build certain combination between theoretical frame work establishment and empirical observations. Therefore, the socio-spatial transition study is neither a macro theory of traditional structuralism nor a typology of urban planning theory, or a positivism social geography, but an operative theory on practical purpose. Firstly, what's distinct from the traditional structuralism is that this study examines the endless transiting structural relations, not macroscopic narrations of absolute definition and structure. In fact, any city and space are always co-existed in their structurational transiting relationship, thus research in transition has become the main body of this study. And case study is a must for research in transition, as part of efforts to apply the structuration concept into practice reason. Secondly, this study first establishes the fundamental structuration concept of socio-spatial transition, which, as an operative tool, is applied to conduct transition analysis on specific case about the City of Beijing. Therefore, as a social space theory, referring to as science, remains criticism of traditional continent philosophy. However, this criticism did not working on the level of ideology or conceptions, but on transiting under structural relations, keeping it from incompetent ideology criticism of continental critical theory. Unfortunately contemporary urban and space development have now gone extremely unbalanced under a background of globalization; yet traditional macro theories are incapable of either producing significant impact on practice or helping people identify practical problems. While facing general issues, particularly the Chinese urban issue category established on a meta-structured city mode, the micro-case study has plunged into dilemma for unknowing either to ask questions or to answer questions. Therefore, this study is set to identify dilemma and find direction for future relevant research. In this dissertation, Beijing is used as a model, and structuration methods as tools. It has extensively analyzed the social-spatial transition of the city space of Beijing, acquiring brand-new knowledge of its urban space development. It is helpful to an in-depth understanding of the city space development not only in Beijing, but also in many other cities that were influenced by the capital model of Beijing. Since the start of reform and opening-up, China has created a unique development mode of the new-styled metropolitan and urbanization in history. This research is expected to analyze or decode what China's urban development in between communal space and associative space.}, subject = {Stadtsoziologie}, language = {en} } @phdthesis{Chen2009, author = {Chen, Fang}, title = {The Chinese Shopping Centre: Integration of a Western Commercial Format into Chinese Urban Space}, doi = {10.25643/bauhaus-universitaet.1386}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090525-14705}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {Being transposed to China and absorbed by its urban space, the Western shopping centre undergoes a process of "Sinicisation", which turns it into a spatial hybrid: a Western retail format shaped by distinctive features of Chinese space production and space use. To a large extent, this study can be regarded as a marginal number of its kind which tries to scientifically understand the impact of a socially, culturally and economically absolutely different urban environment on the model (ideal type) of the Western shopping centre.}, subject = {Einkaufszentrum}, language = {en} } @phdthesis{Chen, author = {Chen, Hsi-Jen}, title = {Kulturelle Unterschiede bei der Nutzung von Smartphones in Deutschland, China und Taiwan}, doi = {10.25643/bauhaus-universitaet.2351}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150223-23517}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {230}, abstract = {Theoretischer Teil: Durch den Vergleich der Daten, die sowohl von den Instituten bzw. Statistikunternehmen z. B. Google, Bundesnetzagentur und Statista in Deutschland, 中国互联网络信息中心 in China, FIND in Taiwan usw. zur Verf{\"u}gung gestellt wurden, als auch durch die von mir durchgef{\"u}hrten Umfragen in den jeweiligen L{\"a}ndern, sowie durch die Interviews in Weimar, zeigen sich die kulturellen Unterschiede sowie die Gemeinsamkeiten bei der Nutzung des Smartphones. Dar{\"u}ber hinaus ergaben sich noch einige Konsequenzen bei den Interpretationen dieser Ergebnisse, die eng mit der Entstehung der kulturellen Unterschiede zusammenh{\"a}ngen. Praktischer Teil: Der erste Entwurf ist eine visuelle Tastatur. Um die Bildschirmtastatur zu verbessern, versucht type right ! (der Name meines Entwurfs) das Problem von Vertippen beim Eingeben zu l{\"o}sen. type right ! hat zwei Schwerpunkte: 1. ge{\"a}nderte Positionen der Buchstaben und Zeichen und 2. ge{\"a}nderte Form der Taste. Der zweite Entwurf handelt von einem Konzept einer App f{\"u}r die Integrationsm{\"o}glichkeit der Kommunikation.}, subject = {Smartphone}, language = {de} } @phdthesis{Chen, author = {Chen, Na}, title = {A Balance between Ideals and Reality — Establishing and Evaluating a Resilient City Indicator System for Central Chinese Cities}, doi = {10.25643/bauhaus-universitaet.4030}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20191121-40309}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {212}, abstract = {Recent years have seen a gradual shift in focus of international policies from a national and regional perspective to that of cities, a shift which is closely related to the rapid urbanization of developing countries. As revealed in the 2011 Revision of the World Urbanization Prospects published by the United Nations, 51\% of the global population (approximately 3.6 billion people) lives in cities. The report predicts that by 2050, the world's urban population will increase by 2.3 billion, making up 68\% of the population. The growth of urbanization in the next few decades is expected to primarily come from developing countries, one third of which will be in China and India. With rapid urbanization and the ongoing growth of mega cities, cities must become increasingly resilient and intelligent to cope with numerous challenges and crises like droughts and floods arising from extreme climate, destruction brought by severe natural disasters, and aggregated social contradictions resulting from economic crises. All cities face the urban development dynamics and uncertainties arising from these problems. Under such circumstances, cities are considered the critical path from crisis to prosperity, so scholars and organizations have proposed the construction of "resilient cities." On the one hand, this theory emphasizes cities' defenses and buffering capacity against disasters, crises and uncertainties, as well as recovery after destruction; on the other hand, it highlights the learning capacity of urban systems, identification of opportunities amid challenges, and maintenance of development vitality. Some scholars even believe that urban resilience is a powerful supplement to sustainable development. Hence, resilience assessment has become the latest and most important perspective for evaluating the development and crisis defense capacity of cities. Rather than a general abstract concept, urban resilience is a comprehensive measurement of a city's level of development. The dynamic development of problems is reflected through quantitative indicators and appraisal systems not only from the perspective of academic research, but also governmental policy, so as to scientifically guide development, and measure and compare cities' development levels. Although international scholars have proposed quantitative methods for urban resilience assessment, they are however insufficiently systematic and regionally adaptive for China's current urban development needs. On the basis of comparative study on European and North American resilient city theories, therefore, this paper puts forwards a theoretical framework for resilient city systems consistent with China's national conditions in light of economic development pressure, natural resource depletion, pollution, and other salient development crises in China. The key factors influencing urban resilience are taken into full consideration; expert appraisal is conducted based on the Delphi Method and the analytic hierarchy process (AHP) to design an extensible and updatable resilient city evaluation system which is sufficiently systematic, geographically adaptable, and sustainable for China's current urban development needs. Finally, Changsha is taken as the main case for empirical study on comprehensive evaluation of similar cities in Central China to improve the indicator system.}, subject = {Stadtplanung}, language = {en} } @phdthesis{Chen, author = {Chen, Pu}, title = {Die Reise der Zeichen - Eine Studie zur symbolischen Bildwelt der Xiy{\"u}-Kultur an der Seidenstraße}, doi = {10.25643/bauhaus-universitaet.2355}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150225-23553}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {281}, abstract = {The present study focuses on the traditional visual Xiyu-Signs of various ethnic groups with the example of Xinjiang in northwest China, along the ancient path of the Silk Road. The research should be understood as an experiment to a systematic presentation of the symbolic visual world in Xinjiang and therefore in a broader sense as an experiment to preserve the endangered Xiyu-Cultural Heritage. Due to the profound change in China and the Go-West-Strategy of China's economic programme an efficient way must be found to bring modernization and tradition in harmony. This study describes, analyses and evaluates exemplarily, how signs and symbols of knowledge and culture have been mixed between eastern and western cultures along the Silk Road in Xinjiang. It displays how they have been transferred and how far the Xiyu-Culture reflects, that Xinjiang was a meeting point of eastern and western cultures. In the process of my research three main questions arose: Firstly, what can the experience model of the ancient Silk Road contribute to the understanding of cultural development in today's information age? Secondly, what does cultural diversity mean for communication in Xinjiang? Is there an increase of media technology in the field of visual communication because of international influences? Thirdly, how can Xinjiang benefit from the opportunities given by the Go-West-Strategy of China's economic programme in an increasingly globalized world and find a balance between culture and economic prosperity? Therefore, this study uses a method that integrates a cultural-anthropological perspective. Characteristics of the traditional visual Xiyu-Signs, their significance for the ethnic groups in Xinjiang and cultural exchanges between Europe and Asia are discussed based on a field work, and the particular influence of trade and transport routes is presented. The visual signs of the Xiyu-Culture are shown from the time before the Islamization to today's Islamic period. The research shows that the signs are not place-bound cultural phenomena or local tradition; they are rather influenced by regional, national and international cultures consciously or unconsciously. They are a result of cultural communication. Finally the signs of Xiyu-Culture of Xinjiang are thoroughly researched with the Go-West-Strategy of the Chinese government. Economic development brings to Xinjiang not only modernization and prosperity, but also a cultural and ecological imbalance. Mankind formed everything into structure, what he perceives around him, with signs. The Xiyu-Signs create a visual structure. The Xiyu-Culture still has influence on the lifestyle of the ethnic groups in Xinjiang. Today, the confrontation between the traditional Xiyu-Culture and economic development has led to a serious conflict in Xinjiang. This study is a critical interpretation of the current situation of Xiyu-Culture and the Chinese economic program in Xinjiang. It also contributes to the analysis of the hitherto insufficiently recognized interactions between history, culture, politics and economics of cultural globalization in Xinjiang.}, subject = {Seidenstraße}, language = {de} } @phdthesis{Chilingaryan, author = {Chilingaryan, Naira}, title = {Industrial Heritage: In-Between Memory and Transformation}, doi = {10.25643/bauhaus-universitaet.2229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140624-22291}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Exploratory Research into Transformation Processes of Former Industrial Complexes of Leipziger Baumwollspinnerei (Leipzig) and Mattatoio di Testaccio (Rome); New Meanings of Industrial Heritage Physical manifestations of the Industrial Revolution left a permanent imprint on the complexion of cities. Abandonment that followed the deindustrialization contributed to an estrangement, turning derelict industrial spaces and run-down factories into a ballast to conjure with. At present, industrial heritage management applies flexibility and creativity, partially overcoming the essentially traditional paradigm of heritage preservation. This approach permits sustainable conservation - utilization and integration of disused industrial constructs in the contemporary urban landscape. Being a part of the European cultural stock, industrial heritage is an exciting and unique setting from many perspectives. It is defined and consumed by many markets, ranging from the industrial heritage tourism to the market of special events and festivals. Reused industrial buildings and factories come into view as products of post-industrial societies, fitting to the Western post-industrial (consumer) culture, offering a field of activities that are at an interface between the industrial history and contemporary socio-cultural milieu. Alteration of values, growth of new roles and definitions of industrial heritage, generated by functional restructuring, is a subject which is often left behind the general discussion about sustainable conservation and adaptive reuse of industrial heritage. Yet, in the modified state, industrial heritage is very complex to understand and to define. By conducting a desk and a case study research of former industrial complexes - Leipziger Baumwollspinnerei and Mattatoio di Testaccio, this doctoral thesis aims to identify industrial heritage as a contemporary (post-industrial) concept. Observation of ideas, values and definitions that emerge as a consequence of the transformation and re-conceptualization of industrial heritage are intended to raise awareness and appreciation of industrial heritage in the full richness of its contemporary interpretation.}, subject = {Denkmal}, language = {en} } @phdthesis{Cicek, author = {Cicek, Burhan}, title = {Revisiting vernacular technique: Engineering a low environmental impact earth stabilisation method}, doi = {10.25643/bauhaus-universitaet.4698}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220803-46989}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {195}, abstract = {The major drawbacks of earth as a construction material — such as its low water stability and moderate strength — have led mankind to stabilize earth. Different civilizations developed vernacular techniques mainly focussing on lime, pozzolan or gypsum stabilization. Recently, cement has become the most commonly used additive in earth stabilization as it improves the strength and durability of plain earth. Also, it is a familiar and globally available construction material. However, using cement as an additive reduces the environmental advantages of earth and run counter to global targets regarding the reduction of CO2 emissions. Alternatives to cement stabilization are currently neither efficient enough to reduce its environmental impact nor allow the possibility of obtaining better results than those of cement. As such, this thesis deals with the rediscovery of a reverse engineering approach for a low environmental impact earth stabilization technique, aiming to replace cement in earth stabilization. The first step in the method consists in a comprehensive review of earth stabilization with regards to earthen building standards and soil classification, which allows us to identify the research gap. The review showed that there is great potential in using other additives which result in similar improvements as those achieved by cement. However, the studies that have been conducted so far either use expansive soils, which are not suitable for earth constructions or artificial pozzolans that indirectly contribute to CO2 emissions. This is the main research gap. The key concept for the development in the second step of the method is to combine vernacular additives to both improve the strength and durability of plain earth and to reduce the CO2 emissions. Various earth-mixtures were prepared and both development and performance tests were done to investigate the performance of this technique. The laboratory analyses on mix-design have proven a high durability and the results show a remarkable increase in strength performance. Furthermore, a significant reduction in CO2 emissions in comparison to cement stabilization could be shown. The third step of the method discusses the results drawn from the experimental programme. In addition, the potential of the new earth mixture with regards to its usability in the field of building construction and architectural design is further elaborated on. The method used in this study is the first of its kind that allows investors to avoid the very time-consuming processes such as finding a suitable source for soil excavation and soil classification. The developed mixture has significant workability and suitability for production of stabilized earthen panels — the very first of its kind. Such a panel is practically feasible, reasonable, and could be integrated into earthen building standards in general and in particular to DIN 18948, which is related to earthen boards and published in 2018.}, subject = {Lehm}, language = {en} } @phdthesis{Ciesla, author = {Ciesla, Agnieszka}, title = {"Shrinking city" in Eastern Germany. The Term in the context of urban development in Poland}, doi = {10.25643/bauhaus-universitaet.1869}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130325-18694}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {170}, abstract = {The aim of this doctoral thesis was to investigate whether the German term "shrinking city" is appropriate to depopulating Polish cities. In order to do so an attempt to define the currently still vague notion of "shrinking city" was made. The urban development of Eastern Germany was thoroughly examined both in a short term perspective and in a wide historical as well as international context, with the Polish urban development used as reference. 25 cities (kreisfreie St{\"a}dte) in Eastern Germany and depopulating Polish cities: Ł{\´o}d{\'{z}} and the Metropolis Silesia were chosen as case studies. On the basis of the gathered information a "shrinking city" in Eastern Germany was defined as a city with a long-lasting population decrease coupled with over-dimensioned, growth-oriented development policies carried out for decades. Such a development path is triggering negative consequences in the spatial, economic and also demographic dimension, which tend to intensify each other. The thesis postulates that the definition of the "shrinking city in Eastern Germany" is not appropriate to depopulating cities in Poland. Polish cities are characterized by a short-lasting population decrease and this trend is not triggering negative spatial and economic consequences. Oversized growth development policies were never present in the cities and they still suffer from great deficiencies in housing and other basic infrastructure, which derive from the socialist period. Furthermore, radical de-economization, known from Eastern German cities, did not occur in the Polish cities. Both Ł{\´o}d{\'{z}} and the Metropolis Silesia remain main production centers of the country. This doctoral thesis presents a contradictory view to contemporary publications on "shrinking cities", in which this phenomenon is regarded as having occurred suddenly after the collapse of the socialism. It proved that "shrinking cities" in Eastern Germany are not the outcome of short-lasting processes, but are deeply rooted in the past. Moreover, they represent a very distinct development pattern that highly differentiates from the one found in Central Eastern Europe and the one in Western Europe. In this way the doctoral thesis provided a new, critical approach to the discourse on "shrinking cities" in Germany. It also draws attention to the importance of the historical analysis in cities' development research, particularly in cross border studies. In time of European integration peculiarities resulting from centuries of different spatial, economic and social development paths should not be underestimated.}, subject = {Stadtplanung}, language = {en} } @phdthesis{Conrad, author = {Conrad, Lisa}, title = {Organisation im soziotechnischen Gemenge - Mediale Umschichtungen durch die Einf{\"u}hrung von SAP}, publisher = {transcript Verlag}, address = {Bielefeld}, isbn = {978-3-8376-3784-7}, doi = {10.25643/bauhaus-universitaet.3107}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180503-31079}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {211}, abstract = {Der Alltag in Organisationen besteht vor allem aus den Medien und Technologien, mit denen die Koordination zwischen einzelnen Arbeitsabl{\"a}ufen hergestellt wird. Diese ethnografische Studie begleitet den Prozess der Einf{\"u}hrung eines SAP-Systems in einem mittelst{\"a}ndischen Unternehmen und zeigt, wie das bestehende Geflecht aus Praktiken und Technologien eine Neuanordnung erf{\"a}hrt. Dabei tritt das komplexe soziotechnische Gemenge zutage, auf dem Koordination und Organisation beruhen. Es geht um Hardware, ebenso wie Software, um mechanische und elektronische Medien, um Papiere, Drucker, Akten, Interfaces und Tastaturen, aber auch um die jahrzehntelang eingespielten Routinen und das Erfahrungswissen der Angestellten.}, subject = {Organisationsforschung}, language = {de} } @phdthesis{Cordes2008, author = {Cordes, Susann}, title = {Die Rolle von Immobilieninvestoren auf dem deutschen Markt f{\"u}r Public Private Partnerships (PPPs) : Eine institutionen{\"o}konomische Betrachtung}, isbn = {978-3-86068-387-3}, doi = {10.25643/bauhaus-universitaet.1381}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090416-14671}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Die Arbeit untersucht auf der Basis der Neuen Institutionen{\"o}konomik die Rolle von Immobilieninvestoren, d.h. offene und geschlossene Immobilienfonds, Real Estate Investment Trusts, Real Estate Private Equity Fonds und Lebensversicherungen, auf dem deutschen Markt f{\"u}r Public Private Partnership Projekte im {\"o}ffentlichen Hochbau. Daf{\"u}r werden Immobilienanlagevehikel als institutionelle Ausgestaltung einer Prinzipal-Agent-Beziehung aufgefasst, bei der der Anleger als Prinzipal die Kapitalanlage an den Immobilieninvestor als Agent delegiert. Die gesch{\"a}ftlichen Aktivit{\"a}ten eines Immobilieninvestors werden durch den normierten Handlungsspielraum, d.h. die rechtlichen Vorgaben, determiniert. Daneben beeinflusst auch die Ausgestaltung der PA-Beziehung, d.h. die Rechte des Prinzipals und die Anreize f{\"u}r den Agenten, die gesch{\"a}ftlichen Aktivit{\"a}ten eines Immobilieninvestors. Zusammengef{\"u}hrt werden diese beiden Kategorien unter dem Begriff des „definierten Gestaltungsrahmens", der als Rahmen der gesch{\"a}ftlichen Aktivit{\"a}ten eines Immobilieninvestors verstanden wird, der dessen PPP-Investitionsm{\"o}glichkeiten bestimmt. So ist die Eignung eines Immobilieninvestors f{\"u}r eine PPP-Investition davon abh{\"a}ngig, ob sein „definierter Gestaltungsrahmen" zum „erforderlichen Gesamtgestaltungsrahmen" des PPP-Projektes passt. Letzterer wird dabei durch das PPP-Vertragsmodell, die PPP-Immobilienart, die PPP-Wertsch{\"o}pfungsphase sowie die gew{\"a}hlte Handlungsoption des Investors auf dem PPP-Markt determiniert. In der Arbeit werden theoretische PPP-Investitionsmodelle entwickelt, in denen dargelegt wird, welche Immobilieninvestoren in welche PPP-Projekte investieren sollten. Dabei werden Empfehlungen zu den geeigneten Handlungsoptionen des jeweiligen Investors auf dem PPP-Markt erarbeitet und dargelegt, in welcher PPP-Wertsch{\"o}pfungsphase dieser investieren sollte und welche der PPP-Vertragsmodelle und PPP-Immobilienarten f{\"u}r eine Investition geeignet sind. Zudem werden Gestaltungsempfehlungen zum rechtlichen Rahmen hergeleitet. Des Weiteren werden die Immobilieninvestoren auch f{\"u}r die bisher schon auf dem PPP-Markt agierenden Bau- und Betreiberunternehmen, insbesondere den Mittelstand, als potentielle Kooperationspartner auf dem Erstmarkt (Prim{\"a}rmarkt), als Exitpartner auf dem Zweitmarkt (Sekund{\"a}rmarkt) oder als Wettbewerber klassifiziert. Die Thematik ist auch f{\"u}r die {\"o}ffentliche Hand von Interesse, da der durch den Markteintritt neuer Investoren erh{\"o}hte Wettbewerb die Konditionen der PPP-Vertr{\"a}ge verbessern kann und die Einbindung des Mittelstandes in PPP-Projekte ausdr{\"u}ckliches Ziel der Bundesregierung ist.}, subject = {Public Private Partnership}, language = {de} } @phdthesis{Coulon1997, author = {Coulon, Carl-Helmut}, title = {Strukurorientiertes Fallbasiertes Schließen}, doi = {10.25643/bauhaus-universitaet.24}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040212-265}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1997}, abstract = {Das Ziel dieser Arbeit war es, durch Verwendung geeigneter vorhandener CAD-Pl{\"a}ne die Bearbeitung neuer CAD-Pl{\"a}ne zu unterst{\"u}tzen. Entstanden ist ein generischer Ansatz zum fallbasierten Schließens. Da in CAD-Pl{\"a}nen die r{\"a}umliche Struktur eine wichtige Rolle spielt, ist das Konzept auf strukturorientierte Anwendungen ausgerichtet. Deshalb bezeichne ich es als ein Konzept zum " strukturorientierten fallbasierten Schließen". Die Arbeit spezifiziert das Minimum an Wissen, welches zur Suche und Wiederverwendung von F{\"a}llen ben{\"o}tigt wird, wie das dar{\"u}ber hinausgehende Wissen verarbeitet wird, welche Zusammenh{\"a}nge es zum Beispiel zwischen Vergleichs- und Anpassungswissen gibt und wie man das Wissen modellieren kann. Zur Erl{\"a}uterung wird das ben{\"o}tigte Wissen anhand verschiedener Anwendungen dargestellt. Das in der Arbeit vorgestellte Konzept erlaubt die Erg{\"a}nzung, Detaillierung und Korrektur einer Anfrage. Die beiden entscheidenden Algorithmen dienen dem Vergleich von Anfrage und Fall und der Anpassung der Information des Falles zur Modifikation der Anfrage.}, subject = {Fallbasiertes Schließen}, language = {de} } @phdthesis{Dahl2010, author = {Dahl, Alexander}, title = {Ber{\"u}cksichtigung externer Kosten bei der Ermittlung von Straßenbenutzungsgeb{\"u}hren auf deutschen Autobahnen}, isbn = {978-3-86068-434-4}, doi = {10.25643/bauhaus-universitaet.1447}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110221-15343}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {Seit 1969 werden f{\"u}r die Bundesrepublik kontinuierlich Berechnungen zu den Gesamtkosten des Straßenverkehrs der Bundesfernstraßen und deren Verteilung auf die Verkehrsteilnehmer durchgef{\"u}hrt. Die Ergebnisse der Wegekostenrechnungen der Jahre 2002 und 2007 sind die Grundlage f{\"u}r die mittlerweile f{\"u}r das deutsche Autobahnnetz eingef{\"u}hrte fahrleistungsbezogene Benutzungsgeb{\"u}hr f{\"u}r Lkw mit einem zul{\"a}ssigen Gesamtgewicht von mindestens zw{\"o}lf Tonnen. Damit wird die Forderung der EU-Richtlinie 1999/62/EG umgesetzt, nach der sich die durchschnittlichen Straßenbenutzungsgeb{\"u}hren an den Kosten f{\"u}r den Bau, den Betrieb und den Ausbau des betreffenden Verkehrswegenetzes orientieren sollen. Mit der EU-Richtlinie 2006/38/EG k{\"u}ndigt sich die weitere Entwicklung bei der Berechnung von Straßenbenutzungsgeb{\"u}hren an. Zuk{\"u}nftig sollen auch externe Kosten in die Berechnung einfließen. Ein erster Schritt zur Ber{\"u}cksichtigung dieser externen Kosten erfolgte mit Erstellung eines Handbuchs im Rahmen eines EU-Forschungsprojektes. Das Handbuch enth{\"a}lt aufgrund der unterschiedlichen Rahmenbedingungen in den Mitgliedsstaaten der EU keine exakten Berechnungsvorschriften, sondern stellt verschiedene methodische Ans{\"a}tze bisher durchgef{\"u}hrter Studien zu externen Kosten vor, gibt Empfehlungen hinsichtlich der Methodenwahl und beinhaltet Sch{\"a}tzungen {\"u}ber die H{\"o}he der externen Kosten. Die im europ{\"a}ischen Raum in den vergangenen Jahren durchgef{\"u}hrten Studien zur Ermittlung externer Kosten des Verkehrs zeichnen sich durch einander {\"a}hnelnde Vorgehensweisen aus, die aber vor allem hinsichtlich der Kostenrechnungsart und der verwendeten Kostens{\"a}tze aus Sicht des Verfassers der vorliegenden Arbeit kritische Aspekte aufweisen. In der vorliegenden Dissertationsschrift wird daher eine alternative Berechnungsmethodik zur Ermittlung abschnitts-, fahrzeugklassen- und fahrleistungsbezogener externer Kosten f{\"u}r Autobahnen entwickelt und an einem ausgew{\"a}hlten Beispielnetz zur Anwendung gebracht. Dabei wird in einigen wesentlichen Punkten von der in aktuellen Studien {\"u}berwiegend gew{\"a}hlten Vorgehensweise abgewichen, um eine andere Sichtweise darzustellen. Damit tr{\"a}gt die vorliegende Arbeit substanziell zur Erweiterung des Erkenntnisstands zu Berechnungsmethoden externer Kosten des Straßenverkehrs bei. Die hier entwickelte Berechnungsmethodik ist außerdem als Grundlage f{\"u}r ein in der Praxis anwendbares Verfahren zu verstehen und zeichnet sich auch daher durch eine einfach zu handhabende {\"U}bertragbarkeit auf das gesamte Autobahnnetz Deutschlands aus. Die Abschnitte entsprechen den Teilstrecken zwischen zwei Autobahnanschlussstellen. Es wird zwischen den beiden Fahrzeugklassen "Lkw ab 12 t zul{\"a}ssigem Gesamtgewicht" und "Sonstigen Fahrzeugen" unterschieden. Obwohl momentan nur eine Benutzungsgeb{\"u}hr f{\"u}r Lkw ab 12 t zul{\"a}ssigem Gesamtgewicht erhoben wird, ist es mit der entwickelten Methodik m{\"o}glich, fahrleistungsbezogene externe Kosten f{\"u}r alle Kfz angeben zu k{\"o}nnen. Die Einbeziehung externer Nutzen wird in diesem Zusammenhang andiskutiert; der Schwerpunkt liegt allerdings auf den externen Kosten. Im Rahmen der Arbeit werden zun{\"a}chst Definitionen wesentlicher Terminologien dargestellt, soweit diese f{\"u}r das Verst{\"a}ndnis der sich anschließenden Diskussion und Festlegung der Grundlagen der entwickelten Berechnungsmethodik notwendig erscheinen. Diese Diskussion und Festlegung umfasst die Bereiche Kostenrechnungsart, Bewertungsverfahren zur Ermittlung des Werteger{\"u}sts, Diskontrate, zu betrachtende Kostenbereiche, Mengenger{\"u}st und Allokationsrechnung. Darauf folgend werden die betrachteten Kostenbereiche anhand vorliegender Studien und eigener {\"U}berlegungen detailliert dargestellt und das Werteger{\"u}st bestimmt. Außerdem wird die Allokationsrechnung und das f{\"u}r die Berechnung heranzuziehende Mengenger{\"u}st f{\"u}r jeden Bereich separat vorgestellt. Anschließend wird die entwickelte Berechnungsmethodik auf ein Beispielnetz (Autobahnnetz Th{\"u}ringen) angewendet. Neben der Vorstellung des Untersuchungsgebiets, der Berechnung der externen Kosten und der disaggregierten Ergebnisdarstellung wird die Einteilung des Beispielnetzes in unterschiedliche Preiskategorien auf der Grundlage der abschnittsbezogen vorliegenden Ergebnisse diskutiert, auf deren Basis die externen Kosten {\"u}ber Straßenbenutzungsgeb{\"u}hren internalisiert werden k{\"o}nnten. Im Rahmen einer Sensitivit{\"a}tsanalyse werden einzelne Annahmen der Berechnungsmethodik bzw. Kostens{\"a}tze des Werteger{\"u}sts variiert. Die Auswirkungen dieser Variationen werden wiederum am Beispielnetz, f{\"u}r das erneute Kostenberechnungen vorgenommen werden, dargelegt. Abschließend werden offen gebliebene Fragestellungen und Empfehlungen f{\"u}r weitere Untersuchungen benannt.}, subject = {Soziale Kosten}, language = {de} } @phdthesis{Damir, author = {Damir, Mirhan}, title = {Recalling the Omitted: Exploring the Spatial Development of the Modern Industrial Legacies in Egypt. The Case of Alexandria.}, doi = {10.25643/bauhaus-universitaet.4619}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220329-46196}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The modern industries of the 19th and 20th centuries had multiple effects on the spatial transformation of cities and regions. The past decade has witnessed increasing scholarly and governmental attempts toward conserving modern industrial heritage in the so-called Global North, with the goal, among others, of leveraging this heritage as a driver for urban economic development. In Egypt, the process continues to lag behind; on the one hand, this is due to the perplexing official recognition of the (in)tangible witnesses of modern industries. On the other hand, the official recognition and previous publications focus predominantly on weighing the significance of industrial structures based on their monumental architectural aesthetics. Their historical urban role and spatial attributes as part of urban heritage have yet to be seriously acknowledged. Accordingly, this hinders the integration of the extant industrial sites into the broader debate surrounding urban conservation, leaving them vulnerable to decay and destruction. This dissertation steers away from the singular investigation of selective modern industrial sites to recall their historical spatial development on a city scale. This is effected by investigating a case study - the Egyptian port city of Alexandria. With the limited secondary data available on modern industries in Alexandria, this dissertation relied predominantly on primary sources. The author collected and leveraged both quantitative and qualitative data to recontextualize modern industries in terms of their spatial dynamics, order, and rationale within cities' transformation. By recalling historical spatial development in Alexandria, the contribution of this dissertation lies in highlighting what the author refers to as the Omitted Heritage. This is defined by the modern industries in Egypt that are intentionally, unintentionally, and forgetfully excluded in terms of physical documentation, evaluation, appreciation, and integration within urban development plans. The method used excavated the richness of the established modern industries in Alexandria in terms of their quantity and diversity, which would have otherwise remained largely forgotten. The contextualization of modern industries unveiled spatial periodization, spatial dynamics, and conceptual development. The study draws on important analytical aspects that transcend the sites' boundaries, elevating their significance to the municipal, regional, national, and even global levels. Its recommendations for further research are also divided into those levels.}, subject = {{\"A}gypten}, language = {en} } @phdthesis{Danckwerth, author = {Danckwerth, Julia}, title = {Strategien der Sichtbarkeit und Sichtbarmachung von ‚Wearable Enhancement' im Bereich Smart Health}, doi = {10.25643/bauhaus-universitaet.4576}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220202-45768}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Die vorliegende Forschungsarbeit befasst sich mit der Entwicklung und Gestaltung von k{\"o}rpernahen, tragbaren Artefakten f{\"u}r den digitalisierten Gesundheitsbereich. Unter dem entwickelten Begriff des Wearable Enhancements werden die verschiedenen Termini aus smarten Textilien, Fashion Technologies, Wearable Technologies sowie elektronischen Textilien zusammengefasst und zwei zentrale Forschungsfragen untersucht. Wie kann Wearable Enhancement im Bereich Smart Health ethisch, sozial und ökologisch entwickelt und gestaltet werden? Inwiefern können textile Schnittstellen die Wahrnehmung und die Wahrnehmbarkeit des Körpers verändern? Mit der ersten Forschungsfrage sollen vorrangig Ansätze und Strategien der Sichtbarkeit f{\"u}r die Entwicklung und Gestaltung diskutiert werden, welche Aussagen f{\"u}r die Designpraxis, den Gestaltungs- und Designforschungsprozess sowie die Designlösungen selbst generieren sollen. Die zweite Forschungsfrage zielt darauf, Formen der Sichtbarmachung von sowie f{\"u}r Wearable Enhancement zu untersuchen. Anhand von drei konkreten Fallstudien werden wesentliche Aspekte der Rezeption, Perzeption, Konstruktion, Konfiguration und Konzeption von soziotechnischen Artefakten zur Funktionssteigerung des menschlichen K{\"o}rpers untersucht und verschiedene Formen der Sichtbarkeit und Sichtbarmachung entwickelt. In der Arbeit wird ein dual-angelegter transdisziplin{\"a}rer Designforschungsansatz entwickelt und praktiziert, welcher sowohl die menschlichen Bed{\"u}rfnisse der Nutzer*innen als auch die Weiterentwicklung von Technologien ber{\"u}cksichtigt. Auf dieser Grundlage wird versucht Anregungen f{\"u}r ein zukunftsf{\"a}higes und zugleich verantwortungsorientiertes Design zu geben.}, subject = {Design}, language = {de} } @phdthesis{Dang, author = {Dang, Trang}, title = {Automated Detailing of 4D Schedules}, doi = {10.25643/bauhaus-universitaet.2310}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141006-23103}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {120}, abstract = {The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30\% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization.}, subject = {Simulation}, language = {en} } @phdthesis{Daube2010, author = {Daube, Dirk}, title = {Public Private Partnership (PPP) f{\"u}r Immobilien {\"o}ffentlicher Krankenh{\"a}user - Entwicklung eines PPP-Eignungstests als Entscheidungshilfe f{\"u}r kommunale Krankenh{\"a}user und Universit{\"a}tsklinika}, isbn = {978-3-86068-439-9}, doi = {10.25643/bauhaus-universitaet.4}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110309-15369}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {Public Private Partnership (PPP) setzt sich zunehmend als alternative Beschaffungsvariante f{\"u}r die {\"o}ffentliche Hand durch. Im Krankenhausbereich bestehen erste Erfahrungen mit PPP, allerdings kann hier im Gegensatz zu anderen {\"o}ffentlichen Bereichen noch nicht von einer Etablierung gesprochen werden. In vielen Krankenh{\"a}usern besteht Unklarheit {\"u}ber dieses neue Organisationskonzept. Was steckt hinter diesem Begriff, der teilweise synonym zur „Privatisierung" verwendet wird? Ausgehend von dieser Fragestellung wird in der vorliegenden Arbeit gezeigt, dass PPP bei richtiger Anwendung eine Alternative zum Verkauf eines {\"o}ffentlichen Krankenhauses darstellt. PPP ist ein Instrument, mit dem privates Know-how und Kapital f{\"u}r den {\"o}ffentlichen Krankenhaustr{\"a}ger nutzbar gemacht wird. Die {\"o}ffentliche Tr{\"a}gerschaft des Krankenhauses bleibt dabei, im Gegensatz zu einer materiellen Privatisierung, erhalten. Die Rahmenbedingungen des Gesundheitswesens stellen insbesondere die {\"o}ffentlichen Krankenh{\"a}user vor große Herausforderungen. Die Lage ist zunehmend gepr{\"a}gt von Mittelknappheit, Sanierungsstau und stetig steigendem Wettbewerbsdruck um die Patienten. Die Reformbem{\"u}hungen der Bundesregierung zur Senkung der Gesundheitsausgaben haben in den letzten Jahrzehnten zu immer neuen Gesetzesregelungen in immer k{\"u}rzeren Zeitabst{\"a}nden gef{\"u}hrt. Den bisher letzten großen Schritt in dieser Entwicklung stellt die Umstellung der Krankenhausverg{\"u}tung auf DRG-Fallpauschalen dar. Die Auswirkungen sind insbesondere in den {\"o}ffentlichen Krankenh{\"a}usern zu sp{\"u}ren. Defizit{\"a}re Einrichtungen, die bisher durch Subventionen gest{\"u}tzt wurden, werden nun nicht mehr „k{\"u}nstlich am Leben" erhalten. Alle Krankenh{\"a}user erhalten eine leistungsorientierte Verg{\"u}tung, weitgehend unabh{\"a}ngig von den krankenhausspezifisch anfallenden Kosten. Durch diese Entwicklungen wurde das Bestreben in den Krankenh{\"a}user, die internen Leistungsprozesse zu optimieren, weiter forciert. Dabei kommt den mit der Geb{\"a}udesubstanz verbundenen Leistungen eine besondere Bedeutung zu. Aufgrund hoher Investitionskosten und bedeutender Aufwendungen in der Nutzungsphase erreichen die nicht-medizinischen Leistungen in einem Krankenhaus einen beachtlichen Anteil an den Gesamtkosten. Fast ein Drittel der Krankenhaus-Kosten steht nicht in direkter Beziehung zum Heilungsprozess. In Deutschland macht dieser Anteil der nicht-medizinischen Abl{\"a}ufe j{\"a}hrlich rd. 18 Mrd. Euro aus. Das Optimierungspotenzial des nicht-medizinischen Leistungsbereichs, der auch die bau- und immobilienwirtschaftlichen Leistungen umfasst, wird bisher oft noch untersch{\"a}tzt und ist in den meisten F{\"a}llen noch nicht ausgesch{\"o}pft. Allein schon aufgrund dessen finanzieller Bedeutung bedarf es einer verst{\"a}rkten wissenschaftlichen Auseinandersetzung. Dieser Notwendigkeit ist bisher noch unzureichend Rechnung getragen wurden. Die vorliegende Arbeit will mit der Erforschung der Anwendbarkeit von PPP f{\"u}r Krankenaus-Immobilien einen Beitrag dazu leisten, diese L{\"u}cke zu schließen. Mit dieser f{\"u}r den deutschen Krankenhausbereich neuartigen Beschaffungsvariante wird ein Weg aufgezeigt, wie bei den nicht-medizinischen Leistungen nachhaltig Effizienzpotenziale erschlossen werden k{\"o}nnen und auf diese Weise ein Beitrag zum wirtschaftlichen Erfolg des gesamten Krankenhauses erzielt werden kann.}, subject = {Public Private Partnership}, language = {de} } @phdthesis{Dief, author = {Dief, Shaima}, title = {Ancient Egyptian Hybrid Deities in Visual Form as Mediator in Cultural Transmission}, doi = {10.25643/bauhaus-universitaet.4933}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230220-49337}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {170}, abstract = {The most fundamental understating of hybridization methodology takes the form of stable but dynamic notions, accumulated over time in the memory of individuals. Schematized and abstracted, the hybrids representation needs to be reproduced and reused in order to reconstruct and bring back other memories. Reinvented, or reused hybrids can support getting access to social, traditional, religious understanding of nations. In this manner, they take the form of the messenger / the mediator an innate, equivalent to the use of mental places in the art of memory. We remember mythology in order to remember other things. From individual memory perspective, or group collective memory, the act of recollection is assumed to be an individual act, biologically based in the brain, but by definition conditioned by social collectives. Following Halbwachs, this thesis does not recognize a dichotomy between individual and collective memory as two different types of remembering. Conversely, the collective is thought of as inherent to individual thought, questioning perspectives that regard individual recollection as isolated from social settings. The individual places himself in relation to the group and makes use of the collective frameworks of thought when he localizes and reconstructs the past, whether in private or in social settings. The frameworks of social relations, of time, and of space are constructs originating in social interaction and distributed in the memory of the group members. The individual has his own perspective on the collective frameworks of the group, and the group's collective frameworks can be regarded as a common denominator of the individual outlooks on the framework. In acts of remembering, the individual may actualize the depicted symbols in memory, but he could also employ precepts from the environment. The latter have been referred to as material or external frameworks of memory, suggesting their similar role as catalysts for processes of remembrance such as that of the hybrids in my paintings. It is only with reference to the hybrids, who work as messengers / mediators with a dual nature, that communicate between the past and the present, the internal and external space, that individual memory and group memory is in focus. The exhibition at the Egyptian museum in Leipzig is my practical method to create a communicative memory, using hybrids as mediators in cultural transimission, as when the act refers to informal and everyday situations in which group members informally search for the past, it takes place in the communicative 162 memory. As explained in chapter one, the exhibition at the Egyptian museum in Leipzig is an act of remembering in search for the past with support of my paintings, which then can considered as part of the cultural memory. In addition to the theoretical framework summarized above, I have applied my hypothesis practically in the form of the public exhibition, and shared the methodology with public audience from Cairo / Egypt and Leipzig / German in the form of visual art workshops and open discussions. I have also suggested an analyzed description of the meaning of hybrids in my artwork as mediators and messengers for the purpose of cultural transmission, as well as in relation to other artists' work and use of a similar concept. By using my hybrid creatures in my visual artwork, I am creating a bridge, mediators to represent both the past and the present, what we remember of the past, and how we understand the past. It is as explained in chapter two; that the hybridization methodology in terms of double membership represented in different cultures -Cairo / Egypt and Leipzig / Germany- can provide a framework which allows artistic discussions and could be individually interpreted, so individual cultures / individual memory can become transparent without losing their identities and turn into communicative memory. This transmission through the hybridization theoretical approech was explicitly clarified with the support of Kr{\"a}mer's hypothesis. The practical attempt was examined by creating a relationship between the witness -me as an artist- and the audience -the exhibition visitors-, to cross space and time, not to bridge differences, rather to represent the contrasts transparently. The Kin-making proposition is adopted by many academics and scholars in modern society and theoretical research; the topic was represented in the roots of the ancient Egyptian mindset and supported theoretically by similar understandings such as Haraway's definition of kin-making. The practical implementation of kin- making can be observed in many of my artwork and was analyzed visually and artistically in chapter three. My practical project outcome tested success by using hybrids in my paintings as mediators, it opened a communicative artistic discussion. This methodology gave a possible path of communication through paintings / visual analyses, and offered relativity through image self-interpretation.}, subject = {Kollektives Ged{\"a}chtnis}, language = {en} } @phdthesis{Diemar2007, author = {Diemar, Andreas}, title = {Simulation des Einsatzh{\"a}rtens und Absch{\"a}tzung der Dauerfestigkeit einsatzgeh{\"a}rteter Bauteile}, doi = {10.25643/bauhaus-universitaet.1109}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080213-12945}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2007}, abstract = {Die vorliegende Arbeit besitzt zwei Schwerpunkte. Zum einen wird das Einsatzh{\"a}rten von Bauteilen basierend auf vorhandenen Materialmodellen simuliert. Zum anderen wird ein Konzept zur Absch{\"a}tzung der Dauerfestigkeit einsatzgeh{\"a}rteter Bauteile vorgestellt, in dem wesentliche Ergebnisse der W{\"a}rmebehandlungssimulation als neue Ausgangsgr{\"o}ßen verwendet werden. Damit konnte erstmals ein geschlossenes werkstoffmechanisches Dauerfestigkeitskonzept f{\"u}r einsatzgeh{\"a}rtete Bauteile erarbeitet werden. F{\"u}r die Analyse beliebiger Bauteilgeometrien ist eine Implementation der Materialmodelle in die FEM notwendig. Im Rahmen dieser Arbeit wurde das FE-Programm ABAQUS verwendet. Speziell f{\"u}r dieses FE-Programm wurde innerhalb dieser Arbeit das Subroutine-System ANTRI zur Simulation des Einsatzh{\"a}rtens und Absch{\"a}tzung der Dauerfestigkeit f{\"u}r einsatzgeh{\"a}rtete Bauteile entwickelt. Zur Verifikation des Subroutine-Systems ANTRI wurden experimenteller Ergebnisse aus der Literatur herangezogen. F{\"u}r alle untersuchten Beispiele wurde eine sehr gute {\"U}bereinstimmung zwischen experimentell ermittelten Daten und simulierten Daten festgestellt.}, subject = {W{\"a}rmebehandlung}, language = {de} } @phdthesis{Diener1998, author = {Diener, J{\"o}rg}, title = {Beitrag zur physikalisch und geometrisch nichtlinearen Berechnung langzeitbelasteter Bauteile aus Stahlbeton und Spannbeton unter besonderer Ber{\"u}cksichtigung des nichtlinearen Kriechens und der Rißbildung}, doi = {10.25643/bauhaus-universitaet.42}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040220-446}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {1998}, abstract = {Der Schwerpunkt der Arbeit ist die Entwicklung eines Berechnungskonzeptes, mit dem die Auswirkungen des zeitabh{\"a}ngigen Materialverhaltens des Betons und der Spannbewehrung auf das Tragverhalten von Stahlbeton und Spannbetonbauteilen wirklichkeitsnah abgesch{\"a}tzt werden k{\"o}nnen. Dabei wird auf die Ber{\"u}cksichtigung des nichtlinearen Kriechens und der Rißbildung besonderer Wert gelegt. Das Konzept basiert auf der sukzessiven Ermittlung der Schnittgr{\"o}ßenanteile und der Deformationen zu festgelegten Zeitpunkten, wobei die Ergebnisse der vorausgehenden Zeitschritte ber{\"u}cksichtigt werden k{\"o}nnen. Ausgehend von der Formulierung des mechanischen Problems als Extremalaufgabe wird die Berechnung innerhalb eines Zeitschritts auf die L{\"o}sung einer quadratischen Optimierungsaufgabe zur{\"u}ckgef{\"u}hrt, wobei die Rißbildung des Betons und geometrisch nichtlineare Einfl{\"u}sse ber{\"u}cksichtigt werden k{\"o}nnen. Die Einbeziehung des nichtlinearen Kriechens erfolgt durch Beschleunigung der linearen Kriechgeschwindigkeit mit einem, von der aktuellen Betonspannung abh{\"a}ngigen Kriechzahlerh{\"o}hungsfaktor. Das Berechnungsmodell wird anhand von Langzeitversuchen an hochbelasteten Betonprismen und Stahlbetonst{\"u}tzen verifiziert. In umfangreichen numerischen Untersuchungen wird der Einfluß des nichtlinearen Kriechens auf das Tragverhalten von vorgespannten Querschnitten und Stahlbetonst{\"u}tzen analysiert.}, subject = {Stahlbetonbauteil}, language = {de} } @phdthesis{Dimmig2002, author = {Dimmig, Andrea}, title = {Einfl{\"u}sse von Polymeren auf die Mikrostruktur und die Dauerhaftigkeit kunststoffmodifizierter M{\"o}rtel (PCC)}, doi = {10.25643/bauhaus-universitaet.62}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040311-653}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2002}, abstract = {Die Einfl{\"u}sse polymerer Zus{\"a}tze auf die Ausbildung der Mikrostruktur im fr{\"u}hen Stadium der Erh{\"a}rtung und auf die Eigenschaften, insbesondere die Dauerhaftigkeit der modifizierten M{\"o}rtel wurden erforscht. Es sollte die Frage beantwortet werden, ob durch die Modifizierung die Dauerhaftigkeit von M{\"o}rteln mehr verbessert werden kann, als dies durch {\"u}bliche betontechnologische Maßnahmen m{\"o}glich ist. Die Ausbildung der Mikrostruktur in den ersten 24 Stunden der Erh{\"a}rtung wurde mit verschiedenen Methoden, u.a. mittels ESEM, untersucht. Es wurden Modellvorstellungen zur Ausbildung der organischen Matrix und der anorganischen Matrix entwickelt: Interaktionen sind Adsorptionsreaktionen, Agglomerationen und Behinderung der Hydratation. Es wurden Frisch- und Festm{\"o}rteluntersuchungen beschrieben und interpretiert. Unterschiedliche Dauerhaftigkeitsuntersuchungen wurden durchgef{\"u}hrt und bewertet. Die Mikrostruktur der Festm{\"o}rtel wurde hinsichtlich ihres Einflusses auf die Dauerhaftigkeit betrachtet.}, subject = {Kunststoffm{\"o}rtel}, language = {de} } @phdthesis{Doering, author = {Doering, Chris}, title = {Die Informationsarchitektur der kommunalen Energiewende}, doi = {10.25643/bauhaus-universitaet.4051}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20191219-40514}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {278}, abstract = {Die kommunale Energiewende stellt die beteiligten Akteure vor große Herausforderungen: Auf Grundlage strukturierter Daten sollen Maßnahmen
 f{\"u}r eine nachhaltige Infrastruktur geplant und umgesetzt werden. Oft fehlt
 den Beteiligten jedoch das n{\"o}tige Wissen {\"u}ber die lokalen Potentiale und Rahmenbedingungen—und an geeigneten Methoden der Informationsvermittlung. Gegenstand dieser Arbeit ist die Analyse der Planungsstrukturen und der Entwurf eines visuellen Informationssystems. Mit der vorliegenden Untersuchung wird gezeigt, wie mit Hilfe von Befragungen, partizipativen Visualisierungen, fiktionalen Szenarien und der systematischen Anwendung visueller Variablen eine fundierte Grundlage geschaffen werden kann f{\"u}r eine nutzerorientierte Gestaltung.}, subject = {Design}, language = {de} } @phdthesis{Dokhanchi, author = {Dokhanchi, Najmeh Sadat}, title = {Measurement of the Indoor Air Temperature Distribution using Acoustic Travel-Time Tomography}, isbn = {978-3-00-075344-2 (print)}, doi = {10.25643/bauhaus-universitaet.4956}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230414-49567}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {155}, abstract = {One of the main criteria determining the thermal comfort of occupants is the air temperature. To monitor this parameter, a thermostat is traditionally mounted in the indoor environment for instance in office rooms in the workplaces, or directly on the radiator or in another location in a room. One of the drawbacks of this conventional method is the measurement at a certain location instead of the temperature distribution in the entire room including the occupant zone. As a result, the climatic conditions measured at the thermostat point may differ from those at the user's location. This not only negatively impacts the thermal comfort assessment but also leads to a waste of energy due to unnecessary heating and cooling. Moreover, for measuring the distribution of the air temperature under laboratory conditions, multiple thermal sensors should be installed in the area under investigation. This requires high effort in both installation and expense. To overcome the shortcomings of traditional sensors, Acoustic travel-time TOMography (ATOM) offers an alternative based on measuring the transmission sound velocity signals. The basis of the ATOM technique is the first-order dependency of the sound velocity on the medium's temperature. The average sound velocity, along the propagation paths, can be determined by travel-times estimation of a defined acoustic signal between transducers. After the travel-times collection, the room is divided into several volumetric grid cells, i.e. voxels, whose sizes are defined depending on the dimension of the room and the number of sound paths. Accordingly, the spatial air temperature in each voxel can be determined using a suitable tomographic algorithm. Recent studies indicate that despite the great potential of this technique to detect room climate, few experiments have been conducted. This thesis aims to develop the ATOM technique for indoor climatic applications while coupling the analysis methods of tomography and room acoustics. The method developed in this thesis uses high-energy early reflections in addition to the direct paths between transducers for travel time estimation. In this way, reflections can provide multiple sound paths that allow the room coverage to be maintained even when a few or even only one transmitter and receiver are used. In the development of the ATOM measurement system, several approaches have been employed, including the development of numerical methods and simulations and conducting experimental measurements, each of which has contributed to the improvement of the system's accuracy. In order to effectively separate the early reflections and ensure adequate coverage of the room with sound paths, a numerical method was developed based on the optimization of the coordinates of the sound transducers in the test room. The validation of the optimal positioning method shows that the reconstructed temperatures were significantly improved by placing the transducers at the optimal coordinates derived from the developed numerical method. The other numerical method developed is related to the selection of the travel times of the early reflections. Accordingly, the detection of the travel times has been improved by adjusting the lengths of the multiple analysis time-windows according to the individual travel times in the reflectogram of the room impulse response. This can reduce the probability of trapping faulty travel times in the analysis time-windows. The simulation model used in this thesis is based on the image source model (ISM) method for simulating the theoretical travel times of early reflection sound paths. The simulation model was developed to simulate the theoretical travel times up to third-order reflections. The empirical measurements were carried out in the climate lab of the Chair of Building Physics under different boundary conditions, i.e., combinations of different room air temperatures under both steady-state and transient conditions, and different measurement setups. With the measurements under controllable conditions in the climate lab, the validity of the developed numerical methods was confirmed. In this thesis, the performance of the ATOM measurement system was evaluated using two measurement setups. The setup for the initial investigations consists of an omnidirectional receiver and a near omnidirectional sound source, keeping the number of transducers as few as possible. This has led to accurately identify the sources of error that could occur in each part of the measuring system. The second measurement setup consists of two directional sound sources and one omnidirectional receiver. This arrangement of transducers allowed a higher number of well-detected travel times for tomography reconstruction, a better travel time estimation due to the directivity of the sound source, and better space utilization. Furthermore, this new measurement setup was tested to determine an optimal selection of the excitation signal. The results showed that for the utilized setup, a linear chirp signal with a frequency range of 200 - 4000 Hz and a signal duration of t = 1 s represents an optimal selection with respect to the reliability of the measured travel times and higher signal-to-noise ratio (SNR). To evaluate the performance of the measuring setups, the ATOM temperatures were always compared with the temperatures of high-resolution NTC thermistors with an accuracy of ±0.2 K. The entire measurement program, including acoustic measurements, simulation, signal processing, and visualization of measurement results are performed in MATLAB software. In addition, to reduce the uncertainty of the positioning of the transducers, the acoustic centre of the loudspeaker was determined experimentally for three types of excitation signals, namely MLS (maximum length sequence) signals with different lengths and duration, linear and logarithmic chirp signals with different defined frequency ranges. For this purpose, the climate lab was converted into a fully anechoic chamber by attaching absorption panels to the entire surfaces of the room. The measurement results indicated that the measurement of the acoustic centre of the sound source significantly reduces the displacement error of the transducer position. Moreover, to measure the air temperature in an occupied room, an algorithm was developed that can convert distorted signals into pure reference signals using an adaptive filter. The measurement results confirm the validity of the approach for a temperature interval of 4 K inside the climate lab. Accordingly, the accuracy of the reconstructed temperatures indicated that ATOM is very suitable for measuring the air temperature distribution in rooms.}, subject = {Bauphysik}, language = {en} } @phdthesis{Dombrowski2003, author = {Dombrowski, Katja}, title = {Einfluss von Gesteinsk{\"o}rnungen auf die Dauerhaftigkeit von Beton}, doi = {10.25643/bauhaus-universitaet.18}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040205-200}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2003}, abstract = {Die Untersuchungen zu Frost-Tau-Widerstand und Alkali-Zuschlag-Reaktionen an Gesteinen, Gesteinsk{\"o}rnungen sowie daraus hergestelltem Beton erfolgen jeweils mit und ohne Taumitteleinfluss. Neben Untersuchungen nach in Deutschland gebr{\"a}uchlichen Normen und Richtlinien werden auch Pr{\"u}fverfahren nach US-Standards und -Richtlinien einbezogen und kritisch analysiert, Modifikationsvorschl{\"a}ge unterbreitet sowie Klimawechsellagerungen und Auslagerungsversuche durchgef{\"u}hrt. Ziel war u.a. festzustellen, ob anhand von Pr{\"u}fergebnissen an Gesteinsk{\"o}rnungen tats{\"a}chlich auf deren Dauerhaftigkeitsverhalten im Beton zu schließen ist. Im Ergebnis erwies sich der Washington Hydraulic Fracture Test als optimales Frostpr{\"u}fverfahren. Eine Alkali-Carbontat-Reaktion kann theoretisch und praktisch ablaufen, war aber in M{\"o}rtel und Beton nicht nachweisbar. Mittels Klimawechsellagerung konnte die Pr{\"u}fzeit f{\"u}r AKR-gef{\"a}hrdete Gesteine in Beton drastisch verk{\"u}rzt werden. Zudem f{\"o}rdern alkalihaltige Taumittel eine AKR.}, subject = {Betonzuschlag}, language = {de} } @phdthesis{Drescher, author = {Drescher, Marcel}, title = {Open Innovation in KMU - Eine empirische Analyse der offenen Innovationsaktivit{\"a}ten im Kontext der Entrepreneurial Orientation}, doi = {10.25643/bauhaus-universitaet.4946}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230314-49463}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {211}, abstract = {Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivit{\"a}ten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erkl{\"a}ren, warum sich die {\"O}ffnung von Innovationsprozessen in KMU unterscheidet. Daf{\"u}r wurde auf eine multiple Fallstudienanalyse zur{\"u}ckgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesl{\"a}ndern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Ber{\"u}cksichtigung von formenden Innovationsaktivit{\"a}ten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gr{\"u}nden f{\"u}r und gegen Open Innovation vermitteln ein {\"u}ber den bisherigen Forschungsstand hinausgehendes Verst{\"a}ndnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erkl{\"a}rt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen f{\"u}r die Unternehmenspraxis.}, subject = {Open Innovation}, language = {de} } @phdthesis{Du2010, author = {Du, Juan}, title = {The Shaping of People's Space - An Inquiry of Human Environmental Experiences and Planning Practice, China}, doi = {10.25643/bauhaus-universitaet.1432}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100913-15191}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {One of the main focuses of recent Chinese urban development is the creation and retrofitting of public spaces driven by the market force and demand. However, researches concerning human and cultural influences on shaping public spaces have been scanty. There still exist many undefined ambiguous planning aspects institutionally and legislatively. This is an explanatory research to address interactions, incorporations and interrelationship between the lived environment and its peoples. It is knowledge-seeking and normative. Theoretically, public space in a Chinese context is conceptualized; empirically, a selected case is inquired. The research has unfolded a comparatively complete understanding of China's planning evolution and on-going practices. Data collection emphasizes the concept of 'people' and 'space'. First-hand data is derived from the intensive fieldwork and observatory and participatory documentations. The ample detailed authentic empirical data empowers space syntax as a strong analysis tool in decoding how human's activities influence the public space. Findings fall into two categories but interdependent. Firstly, it discloses the studied settlement as a generic, organic and incremental development model. Its growth and established environment is evolutionary and incremental, based on its intrinsic traditions, life values and available resources. As a self-sustaining settlement, it highlights certain vernacular traits of spatial development out of lifestyles and cultural practices. Its spatial articulation appears as a process parallel to socio-economic transitions. Secondly, crucial planning aspects are theoretically summarized to address the existing gap between current planning methodology and practicalities. It pinpoints several most significant and particular issues, namely, disintegrated land use system and urban planning; missing of urban design in the planning system, loss of a human-responsive environment resulted from standardized planning and under-estimation of heritage in urban development. The research challenges present Chinese planning laws and regulations through urban public space study; and pinpoints to yield certain growth leverage for planning and development. Thus, planning is able to empower inhabitants to make decisions along the process of shaping and sustaining their space. Therefore, it discusses not only legislative issues, concerning land use planning, urban design and heritage conservation. It leads to a pivotal proposal, i.e., the integration of human and their social spaces in formulating a new spatial strategy. It expects to inform policymakers of underpinning social values and cultural practices in reconfiguring postmodern Chinese spatiality. It propounds that social context endemic to communities shall be integrated as a crucial tool in spatial strategy design, hence to strengthen spatial attributes and improve life quality.}, subject = {{\"O}ffentlicher Raum}, language = {en} } @phdthesis{Dwaji, author = {Dwaji, Bahaa}, title = {Stadthotels in Deutschland zwischen Energieeffizienz und Wirtschaftlichkeit - Studie auf Grundlagen der EnEV-Anforderungen}, doi = {10.25643/bauhaus-universitaet.2685}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20161020-26855}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {264}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit dem Thema Stadthotels in Deutschland zwischen Energieeffizienz und Wirtschaftlichkeit - Studie auf Grundlagen der EnEV-Anforderungen. Die Arbeit setzt sich mit einer qualitativen und quantitativen Analyse {\"u}ber die Energieeffizienz auf Grundlagen der EnEV-Anforderungen und deren Wirtschaftlichkeit bei Stadthotels in Deutschland auseinander. Die Analyse wurde anhand von verschiedenen Untersuchungen bei Hotels aufgebaut. Diese umfassen empirische, energetische und wirtschaftliche Untersuchungen. Die durchgef{\"u}hrten Untersuchungen kommen schließlich zu eindeutigen Ergebnissen auf verschiedenen Ebenen. Im Ergebnis wird deutlich, dass die Optimierung der Geb{\"a}udetechnik sowie auch die Verbesserung der energetischen Qualit{\"a}t der Geb{\"a}udeh{\"u}lle der Hotels bedeutende Einflussfaktoren zur Steigerung der Energieeffizienz darstellen. Dabei ist jedoch festzuhalten, dass sich die Optimierung der Geb{\"a}udetechnik der Hotels insbesondere im Bereich der L{\"u}ftungs- und Klimatechnik als besonders wirksam erwiesen hat. Die Effektivit{\"a}t dieser Maßnahmen konnte sowohl in Hinsicht auf die Steigerung der Energieeffizienz als auch in Bezug auf die Wirtschaftlichkeit bewiesen werden.}, subject = {Stadthotels; Energieeffizienz; Wirtschaftlichkeit}, language = {de} } @phdthesis{Eberhardt2010, author = {Eberhardt, Arnd Bernd}, title = {On the mechanisms of shrinkage reducing admixtures in self con-solidating mortars and concretes}, isbn = {978-3-8440-0027-6}, doi = {10.25643/bauhaus-universitaet.1454}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110620-15491}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2010}, abstract = {'Zur Wirkungsweise schwindreduzierender Zusatzmittel in selbstverdichtenden M{\"o}rteln und Betonen' Problemstellung und Zielsetzung 1. Der Einsatz selbstverdichtender M{\"o}rtel und Betone im Bauwesen erbringt klare Vorteile. Dies sind im Wesentlichen eine erh{\"o}hte Betonierleistung, verbesserte Betonierqualit{\"a}t f{\"u}r bewehrten Beton im Allgemeinen und f{\"u}r filigrane, eng bewehrte Bauteile im Besonderen. Die mit den traditionellen Methoden des Betonbaus verbundenen L{\"a}rmemissionen werden erheblich reduziert. Der Wegfall der f{\"u}r herk{\"o}mmlichen Beton notwendigen Verdichtungsarbeit reduziert den manuellen Aufwand und die damit verbundenen Gesundheitsrisiken. Das im selbstverdichtenden Beton ben{\"o}tigte hohe Bindemittelleimvolumen ist der Betondauerhaftigkeit abtr{\"a}glich. Es bewirkt, dass selbstverdichtende Betone ein erh{\"o}htes Schwindmaß sowie eine h{\"o}here Rissneigung aufweisen. Ersteres kann f{\"u}r Betonbauteile zu erheblichen Verformungen oder Zwangsspannungen f{\"u}hren, w{\"a}hrend Letzteres die Dauerhaftigkeit des Baustoffes Beton aufgrund einer Beg{\"u}nstigung rissinduzierter Sch{\"a}digungsmechanismen stark beeintr{\"a}chtigt. 2. Herk{\"o}mmliche Methoden zur Schwindreduktion und Rissvermeidung verfolgen haupts{\"a}chlich das Ziel, die im Beton einzusetzenden Bindemittelmengen zu reduzieren. F{\"u}r selbstverdichtende Betone ist dieses Konzept nur sehr begrenzt anwendbar, da die Selbstverdichtung dieser Betone relativ hohe Bindemittelleimvolumen erfordert. Eine M{\"o}glichkeit das Ausmaß des Schwindens und damit die Rissanf{\"a}lligkeit selbstverdichtender Betone zu senken, besteht in der Anwendung schwindreduzierender Betonzusatzmittel. Eingef{\"u}hrt in den achtziger Jahren des 20ten Jahrhunderts in Japan, erweisen sich diese Zusatzmittel als effiziente Methode zur Verbesserung der Qualit{\"a}t bindemittelreicher Hochleistungsbetone im Allgemeinen und selbstverdichtender Betone im Besonderen. 3. W{\"a}hrend die Wirksamkeit schwindreduzierender Betonzusatzmittel in zahlreichen anwendungsorientierten Studien nachgewiesen werden konnte, ist das Wirkprinzip nur unzureichend erforscht. Eines der Hauptziele dieser Arbeit ist deshalb die gr{\"u}ndliche Erforschung des Wirkmechanismus schwindreduzierender Betonzusatzmittel. 4. Weiterhin besteht Unklarheit, wie diese Zus{\"a}tze in den Chemismus der Zementhydratation eingreifen und ob dies der allgemeinen Dauerhaftigkeit des Baustoffes Beton abtr{\"a}glich ist. Ein wichtiges Ziel dieser Arbeit ist deshalb die gr{\"u}ndliche Erforschung der Zementhydratation in Gegenwart einer repr{\"a}sentativen Auswahl verschiedener Typen schwindreduzierender Betonzusatzmittel. 5. Die Nachhaltigkeit der Anwendung schwindreduzierender Zusatzmittel ist bedeutend f{\"u}r die Betondauerhaftigkeit. Ob schwindreduzierende Zusatzmittel auslaugbar sind und ob eine Auslaugung die Schwindreduktion langfristig beeintr{\"a}chtigt, sind weitere Fragen, denen im Rahmen dieser Arbeit nachgegangen wird. Stand der Wissenschaft 6. Schwinden und Quellen von zement{\"a}ren Baustoffen wird im Allgemeinen mittels makroskopisch-thermodynamischer Ans{\"a}tze beschrieben. Der stark vereinfachte Ansatz kapillaren Unterdrucks bzw. hydrostatischen Drucks als treibende Kraft f{\"u}r hygrische Verformungen wird weitgehend abgelehnt. Vielmehr wird im Bereich moderater Luftfeuchten der Spaltdruck und im Bereich niedriger Luftfeuchten die Oberfl{\"a}chenenergie zur Beschreibung der hygrischen Volumenstabilit{\"a}t herangezogen. 7. Schwindreduzierende Betonzusatzmittel bestehen {\"u}berwiegend aus synergistischen Abmischungen nicht-ionischer Tenside mit Glykolen. Die amphiphilen Eigenschaften der nicht-ionischen Tenside f{\"u}hren zu einer Senkung der Oberfl{\"a}chenspannung des Zementporenwassers. In Abh{\"a}ngigkeit ihrer Konzentration in w{\"a}ssrigen Elektrolyten bilden nicht-ionische Tenside Mizellen und/oder Fl{\"u}ssigkristalle. Beobachtet wurden Mischungsl{\"u}cken und Aussalzungen dieser organischen, oberfl{\"a}chenaktiven Substanzen. Durch die Zugabe von Glykolen wird die Mischbarkeit nicht-ionischer Tenside mit w{\"a}ssrigen Elektrolyten stark erh{\"o}ht und f{\"u}hrt zu einer Absenkung der Bildung von Fl{\"u}ssigkristallen und organischen Aussalzungen sowie zu einer verminderten Adsorption des Tensides an Feststoffoberfl{\"a}chen. Der ausschließlich in der Patentliteratur erw{\"a}hnte Synergieeffekt bei der Abmischung nicht-ionischer Tenside mit Glykolen zu Schwindreduzierern bezieht sich auf eine erh{\"o}hte Schwindreduktionskapazit{\"a}t des Zusatzmittels und beruht auf der Abmilderung aller Effekte, die zu einer Abscheidung des Tensides aus der w{\"a}ssrigen L{\"o}sung f{\"u}hren. 8. Eine Implementierung der spezifischen chemisch-physikalischen Eigenschaften schwind-reduzierender Zusatzmittel in bestehende Modelle zur Beschreibung des Trocknungsschwindens ist der Fachliteratur nicht zu entnehmen. Mit Ausnahme des Kapillardruckmodells zur Vorhersage des Trocknungsschwindens lassen sich Charakteristika schwindreduzierender Betonzusatzmittel, im Speziellen ihrer Oberfl{\"a}chenaktivit{\"a}t, nicht bzw. nur unzureichend in bestehende Modelle zum Trocknungsschwinden implementieren. Methodik 9. Die Oberfl{\"a}chenaktivit{\"a}t einer repr{\"a}sentativen Auswahl an Schwindreduzierern wurde in makroskopischen Versuchen an synthetischen als auch an extrahierten Zementporenw{\"a}ssern quantifiziert. Dies umfasste auch die Quantifizierung von Mischungsl{\"u}cken und organischen Aussalzungen. 10. Ein in dieser Arbeit entwickelter theoretischer Ansatz zur Auswertung herk{\"o}mmlicher Messungen der Oberfl{\"a}chenspannung erlaubt eine Absch{\"a}tzung der Oberfl{\"a}chenspannung der Porenl{\"o}sung im trocknenden, zement{\"a}ren Porensystem. 11. Der Einfluss schwindreduzierender Zusatzmittel auf den Hydratationsmechanismus, d.h. Hydratphasenbestand und Hydratationskinetik, wurde mittels Thermogravimetrie, R{\"o}ntgenphasenanalyse bzw. isothermer W{\"a}rmeleitungskalorimetrie erfasst. Zus{\"a}tzlich wurde Elektronenmikroskopie zur Beschreibung der Mikrostrukturen und energiedispersive R{\"o}ntgenspektroskopie zur qualitativen Bestimmung von niedrig konzentrierten Hydratphasen eingesetzt. Die Ver{\"a}nderungen der Komposition des Zementporenwassers in Gegenwart schwindreduzierender Zusatzmittel wurden analysiert. Die spezifische Adsorption schwindreduzierender Zusatzmittel an Zementhydraten wurde an hydratisierendem Zement als auch an synthetischen Hydratphasen untersucht. 12. Der Mechanismus der Auslaugung schwindreduzierender Zusatzmittel wurde in Standtests untersucht, w{\"a}hrend praxisnahe Konditionen mittels zyklischer Auslaugung und Trocknung in Langzeittests simuliert wurden. 13. Die Beschreibung der hygrischen Eigenschaften von Zementstein und M{\"o}rteln erfolgte anhand von Schwind- und Desorptionsisothermen. Basierend auf thermodynamischen Ans{\"a}tzen wurden unter Verwendung dieser Schwind- und Desorptionsisothermen Energiebilanzen erstellt, die eine Unterscheidung zwischen Verformungsenergie und Energie zur Erzeugung von Oberfl{\"a}che im Trocknungsprozess zement{\"a}rer Baustoffe zulassen und somit eine Abgrenzung der Einflussnahme von Schwindreduzierern auf diese spezifische Energieverteilung erm{\"o}glichen. Im Wesentlichen erzielte Ergebnisse 14. Schwindreduzierende Betonzusatzmittel nehmen aufgrund ihrer amphiphilen Eigenschaften Einfluss auf den Hydratationsmechanismus von Portlandzementen. In Gegenwart dieser Zusatzmittel ist die L{\"o}slichkeit f{\"u}r anorganische Salze verringert. Die Konzentration von Calcium-, Kalium- und Sulfationen sinkt mit zunehmender Konzentration des Zusatzmittels. W{\"a}hrend der Induktionsperiode der Portlandzementhydratation f{\"u}hrt dies zur tempor{\"a}ren Ausf{\"a}llung von Calcium-Kalium-Sulfathydrat. Eine Ver{\"a}nderung des Hydratphasenbestandes in Gegenwart von schwindreduzierenden Zusatzmitteln kann nicht signifikant unterschieden werden. Somit sind nachteilige Auswirkungen auf die Dauerhaftigkeit derartig modifizierter Betone aufgrund eines ver{\"a}nderten Hydratphasenbestandes nicht zu erwarten. 15. Die stark verz{\"o}gernde Wirkung von Schwindreduzierern in Kombination mit polycarboxylat-basierten Fließmitteln beruht nicht auf der Adsorption des Schwindreduzierers am hydratisierenden Klinker. Vielmehr kann davon ausgegangen werden, dass die verminderte L{\"o}slichkeit f{\"u}r Salze in der Porenl{\"o}sung den Reaktionsumsatz absenkt und/oder eine spezifische Adsorption des nicht-ionischen Tensides an Portlanditkeimen deren Wachstum hemmt und damit die Aufl{\"o}sung von silikatischen Klinkerphasen. 16. Schwindreduzierende Zusatzmittel weisen eine spezifische Adsorption an Portlandit auf, einem Nebenprodukt der Hydratationsreaktionen eines Hauptbestandteils von Portlandzement. Ein verst{\"a}rktes Kristallwachstum von Portlandit in lateraler Dimension f{\"u}hrt zu einer Zunahme der spezifischen Oberfl{\"a}che des hydratisierten Zementsteines. F{\"u}r nass nachbehandelte Zementsteine bedeutet dies eine Zunahme der Gelporosit{\"a}t auf Kosten der Kapillarporosit{\"a}t. Eine Einflussnahme auf die Gesamtporosit{\"a}t l{\"a}sst sich nicht feststellen. 17. Die Zunahme der spezifischen Oberfl{\"a}che von Zementstein in Gegenwart von Schwindreduzierern bewirkt eine verst{\"a}rkte physikalische Adsorption von Zementporenwasser am Feststoff. F{\"u}r Betone mit niedrigem w/z-Wert oder unzureichender Nachbehandlung kann dieser Prozess zu einer Reduktion des f{\"u}r die Hydratation verf{\"u}gbaren Wassers f{\"u}hren und in einem vermindertem Hydratationsgrad resultieren. Dies k{\"o}nnte eine Ursache f{\"u}r die in der Literatur beschriebenen Einbußen bez{\"u}glich mechanischer Eigenschaften beim Einsatz von Schwindreduzieren sein. 18. Schwindreduzierer sind im hohen Maße auslaugbar. Jedoch zeigen zyklische Langzeittests, dass ein signifikanter Austrag des Zusatzmittels in vorwiegend trockener Exposition nicht zu erwarten ist. Die Nachhaltigkeit des Einsatzes dieser Zusatzmittel ist gegeben, wenn die Anwendung im Beton das Ziel der Reduktion des Trocknungsschwindens verfolgt. 19. Die schwindreduzierende Wirkung der nicht-ionischen Tenside beruht vorwiegend auf der Reduktion der Oberfl{\"a}chenspannung der Grenzfl{\"a}che „fl{\"u}ssig/gasf{\"o}rmig" des trocknenden Zementsteines. Inwieweit diese Oberfl{\"a}chenspannung durch das nicht-ionischeTensid herabgesetzt wird, ist von der Gesamtkonzentration im Allgemeinen und im Speziellen von der Konzentration des Tensides in der Oberfl{\"a}che abh{\"a}ngig. Da im Zuge des Trocknens diese Grenzfl{\"a}che w{\"a}chst, kann bei gegebener Gesamtkonzentration des Zusatzmittels im Beton dessen Konzentration in der Grenzfl{\"a}che sinken, woraufhin die Oberfl{\"a}chenspannung ansteigt und die Schwindreduktion sinkt. 20. Im Ergebnis dieser Arbeit ist es m{\"o}glich, die Entwicklung sowohl der Oberfl{\"a}che als auch ihrer Oberfl{\"a}chenspannung im Trocknungsprozess zu quantifizieren und diese Ergebnisse in einen einfachen konzeptionellen, thermodynamischen Ansatz zur Minimierung der freien Energie des trocknenden, zement{\"a}ren Porensystems zu {\"u}berf{\"u}hren. Die Verwendung dieses konzeptionellen Ansatzes erlaubt es, den Wirkmechanismus schwindreduzierender Betonzusatzmittel zu beschreiben.}, subject = {Schwinden}, language = {en} } @phdthesis{Ebert2002, author = {Ebert, Matthias}, title = {Experimentelle und numerische Untersuchung des dynamischen Verhaltens von Stahlbetontragwerken unter Ber{\"u}cksichtigung stochastischer Eigenschaften}, doi = {10.25643/bauhaus-universitaet.51}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040302-531}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2002}, abstract = {Der Zusammenhang zwischen Sch{\"a}digung und der Ver{\"a}nderung dynamischer und statischer Eigenschaften von Stahlbetonstrukturen wird untersucht. Auf der einen Seite stehen die statischen Lastversuche in Verbindung mit dynamischen Experimenten an Stahlbetonstrukturen (Platten und Balken). Auf der anderen Seite wird f{\"u}r die Balkenstrukturen ein nichtlineares Stochastisches Finite Elemente Modell entwickelt. Dies ber{\"u}cksichtigt zuf{\"a}llige Material- und Festigkeitseigenschaften durch r{\"a}umlich korrelierte Zufallsfelder. So werden stochastische Rissentwicklungen f{\"u}r den Stahlbeton simuliert. F{\"u}r die Berechnungen vieler Realisationen und damit verschiedenartige "Lebensgeschichten" einer Struktur wird als Monte Carlo Methode Latin Hypercube Sampling verwendet. Die Auswertung der Strukturantworten f{\"u}r die Lastgeschichte zeigt den Einfluss der zuf{\"a}lligen Eigenschaften auf die Sch{\"a}digungsentwicklung. Die Arbeit leistet einen Beitrag zur Bewertung und zum zuk{\"u}nftigen Einsatz dynamischer Untersuchungsmethoden im Bauwesen.}, subject = {Stahlbetonkonstruktion}, language = {de} } @phdthesis{Eckardt2009, author = {Eckardt, Stefan}, title = {Adaptive heterogeneous multiscale models for the nonlinear simulation of concrete}, doi = {10.25643/bauhaus-universitaet.1416}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20100317-15023}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2009}, abstract = {The nonlinear behavior of concrete can be attributed to the propagation of microcracks within the heterogeneous internal material structure. In this thesis, a mesoscale model is developed which allows for the explicit simulation of these microcracks. Consequently, the actual physical phenomena causing the complex nonlinear macroscopic behavior of concrete can be represented using rather simple material formulations. On the mesoscale, the numerical model explicitly resolves the components of the internal material structure. For concrete, a three-phase model consisting of aggregates, mortar matrix and interfacial transition zone is proposed. Based on prescribed grading curves, an efficient algorithm for the generation of three-dimensional aggregate distributions using ellipsoids is presented. In the numerical model, tensile failure of the mortar matrix is described using a continuum damage approach. In order to reduce spurious mesh sensitivities, introduced by the softening behavior of the matrix material, nonlocal integral-type material formulations are applied. The propagation of cracks at the interface between aggregates and mortar matrix is represented in a discrete way using a cohesive crack approach. The iterative solution procedure is stabilized using a new path following constraint within the framework of load-displacement-constraint methods which allows for an efficient representation of snap-back phenomena. In several examples, the influence of the randomly generated heterogeneous material structure on the stochastic scatter of the results is analyzed. Furthermore, the ability of mesoscale models to represent size effects is investigated. Mesoscale simulations require the discretization of the internal material structure. Compared to simulations on the macroscale, the numerical effort and the memory demand increases dramatically. Due to the complexity of the numerical model, mesoscale simulations are, in general, limited to small specimens. In this thesis, an adaptive heterogeneous multiscale approach is presented which allows for the incorporation of mesoscale models within nonlinear simulations of concrete structures. In heterogeneous multiscale models, only critical regions, i.e. regions in which damage develops, are resolved on the mesoscale, whereas undamaged or sparsely damage regions are modeled on the macroscale. A crucial point in simulations with heterogeneous multiscale models is the coupling of sub-domains discretized on different length scales. The sub-domains differ not only in the size of the finite elements but also in the constitutive description. In this thesis, different methods for the coupling of non-matching discretizations - constraint equations, the mortar method and the arlequin method - are investigated and the application to heterogeneous multiscale models is presented. Another important point is the detection of critical regions. An adaptive solution procedure allowing the transfer of macroscale sub-domains to the mesoscale is proposed. In this context, several indicators which trigger the model adaptation are introduced. Finally, the application of the proposed adaptive heterogeneous multiscale approach in nonlinear simulations of concrete structures is presented.}, subject = {Beton}, language = {en} } @phdthesis{Ehrhardt, author = {Ehrhardt, Dirk}, title = {ZUM EINFLUSS DER NACHBEHANDLUNG AUF DIE GEF{\"U}GEAUSBILDUNG UND DEN FROST-TAUMITTELWIDERSTAND DER BETONRANDZONE}, doi = {10.25643/bauhaus-universitaet.3688}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171120-36889}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {235}, abstract = {Die Festigkeitsentwicklung des Zementbetons basiert auf der chemischen Reaktion des Zementes mit dem Anmachwasser. Durch Nachbehandlungsmaßnahmen muss daf{\"u}r gesorgt werden, dass dem Zement gen{\"u}gend Wasser f{\"u}r seine Reaktion zur Verf{\"u}gung steht, da sonst ein Beton mit minderer Qualit{\"a}t entsteht. Die vorliegende Arbeit behandelt die grunds{\"a}tzlichen Fragen der Betonnachbehandlung bei Anwendung von Straßenbetonen. Im Speziellen wird die Frage des erforderlichen Nachbehandlungsbedarfs von h{\"u}ttensandhaltigen Kompositzementen betrachtet. Die Wirkung der Nachbehandlung wird anhand des erreichten Frost-Tausalz-Widerstandes und der Gef{\"u}geausbildung in der unmittelbaren Betonrandzone bewertet. Der Fokus der Untersuchungen lag auf abgezogenen Betonoberfl{\"a}chen. Es wurde ein Modell zur Austrocknung des jungen Betons erarbeitet. Es konnte gezeigt werden, dass in einer fr{\"u}hen Austrocknung (Kapillarphase) keine kritische Austrocknung der Betonrandzone einsetzt, sondern der Beton ann{\"a}hrend gleichm{\"a}ßig {\"u}ber die H{\"o}he austrocknet. Es wurde ein Nomogramm entwickelt, mit dem die Dauer der Kapillarphase in Abh{\"a}ngigkeit der Witterung f{\"u}r Straßenbetone abgesch{\"a}tzt werden kann. Eine kritische Austrocknung der wichtigen Randzone setzt nach Ende der Kapillarphase ein. F{\"u}r Betone unter Verwendung von Zementen mit langsamer Festigkeitsentwicklung ist die Austrocknung der Randzone nach Ende der Kapillarphase besonders ausgepr{\"a}gt. Im Ergebnis zeigen diese Betone dann einen geringen Frost-Tausalz-Widerstand. Mit Zementen, die eine 2d-Zementdruckfestigkeit ≥ 23,0 N/mm² aufweisen, wurde unabh{\"a}ngig von der Zementart (CEM I oder CEM II/B-S) auch dann ein hoher Frost-Tausalz-Widerstand erreicht, wenn keine oder eine schlechtere Nachbehandlung angewendet wurde. F{\"u}r die Praxis ergibt sich damit eine einfache M{\"o}glichkeit der Vorauswahl von geeigneten Zementen f{\"u}r den Verkehrsfl{\"a}chenbau. Betone, die unter Verwendung von Zementen mit langsamere Festigkeitsentwicklung hergestellt werden, erreichen einen hohen Frost-Tausalz-Widerstand nur mit einer geeigneten Nachbehandlung. Die Anwendung von fl{\"u}ssigen Nachbehandlungsmitteln (NBM gem{\"a}ß TL NBM-StB) erreicht eine {\"a}hnliche Wirksamkeit wie eine 5 t{\"a}gige Feuchtnachbehandlung. Voraussetzung f{\"u}r die Wirksamkeit der NBM ist, dass sie auf eine Betonoberfl{\"a}che ohne sichtbaren Feuchtigkeitsfilm (feuchter Glanz) aufgespr{\"u}ht werden. Besonders wichtig ist die Beachtung des richtigen Auftragszeitpunktes bei k{\"u}hler Witterung, da hier aufgrund der verlangsamten Zementreaktion der Beton l{\"a}nger Anmachwasser abst{\"o}ßt. Ein zu fr{\"u}her Auftrag des Nachbehandlungsmittels f{\"u}hrt zu einer Verschlechterung der Qualit{\"a}t der Betonrandzone. Durch Bereitstellung hydratationsabh{\"a}ngiger Transportkenngr{\"o}ßen (Feuchtetransport im Beton) konnten numerische Berechnungen zum Zusammenspiel zwischen der Austrocknung, der Nachbehandlung und der Gef{\"u}geentwicklung durchgef{\"u}hrt werden. Mit dem erstellten Berechnungsmodell wurden Parameterstudien durchgef{\"u}hrt. Die Berechnungen best{\"a}tigen die wesentlichen Erkenntnisse der Laboruntersuchungen. Dar{\"u}ber hinaus l{\"a}sst sich mit dem Berechnungsmodell zeigen, dass gerade bei langsam reagierenden Zementen und k{\"u}hler Witterung ohne eine Nachbehandlung eine sehr d{\"u}nne Randzone (ca. 500 µm - 1000 µm) mit stark erh{\"o}hter Kapillarporosit{\"a}t entsteht.}, subject = {Beton}, language = {de} }