@book{OPUS4-3220, title = {Kino-Enthusiasmus. Die Schenkung Heimo Bachstein}, editor = {Pantenburg, Volker and Richter, Katrin}, publisher = {Lucia Verlag}, address = {Weimar}, isbn = {978-3-945301-33-3}, doi = {10.25643/bauhaus-universitaet.3220}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170522-32208}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {75}, abstract = {Heimo Bachstein, Jahrgang 1937, war Sparkassenangestellter und Filmenthusiast. Er lebte in Marktheidenfeld unweit von W{\"u}rzburg, wo er 2011 starb. In den 1960er Jahren begann er, Filmplakate und Fotografien zu sammeln, schrieb filmkritische Texte und Vortr{\"a}ge, korrespondierte mit Verleihern, Filmemachern und Festivalleitungen, agierte als Jurymitglied und wurde gelegentlich als Schauspieler besetzt. Im Laufe von f{\"u}nf Jahrzehnten entstand auf diese Weise in seiner Wohnung ein „Filmkunstarchiv" - so eine von Bachsteins Bezeichnungen -, das kurz vor seinem Tod als Schenkung an die Bauhaus-Universit{\"a}t Weimar kam.}, subject = {Film}, language = {de} } @inproceedings{OPUS4-3826, title = {Hochschulwege 2015}, editor = {Mai, Andreas}, publisher = {tredition GmbH}, address = {Hamburg}, isbn = {978-3-7439-1763-7}, doi = {10.25643/bauhaus-universitaet.3826}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181130-38263}, pages = {396}, abstract = {Die in diesem Tagungsband zusammengef{\"u}hrten Beitr{\"a}ge besch{\"a}ftigen sich mit dem Spannungsfeld, das sich zwischen externen F{\"o}rderprogrammen, Ver{\"a}nderungsprojekten und den Zielen, Strukturen und Bedingungen der jeweiligen Hochschule ergibt. In diesem Spannungsfeld kommt es unweigerlich zu Reibungen, da vorhandene Strukturen und Ziele in Konflikt mit neuen Vorhaben und Ideen geraten. Ein Teil der Projekte stellt allein durch ihr finanzielles Volumen und die daraus resultierende Wirkkraft die tradierten Verh{\"a}ltnisse zwischen Lehre, Forschung und den wissenschaftsst{\"u}tzenden Bereichen in Frage und teils auf den Kopf. Die leitenden Fragen der Tagung und der hier versammelten Beitr{\"a}ge waren daher: Wie bringen Hochschulen ihre individuellen Ziele mit denen der bundesweiten Programme oder l{\"a}nderspezfifischer F{\"o}rdermaßnahmen {\"u}berein? Wie gehen Hochschulen mit ihren Projekten um? Wie vollzieht sich Ver{\"a}nderung an den Hochschulen? Und schließlich: Was bleibt von den Impulsen, die Projekte setzen? Die in diesem Tagungsband versammelten Beitr{\"a}ge geben darauf erste, auf dem bisherigen Erfahrungswissen basierende Antworten. Sie setzen sich intensiv mit den Faktoren auseinander, die den Erfolg von Ver{\"a}nderungsprozessen und Projekten bef{\"o}rdern oder behindern k{\"o}nnen und leiten daraus Empfehlungen f{\"u}r Gestaltungsprozesse an Hochschulen ab.}, subject = {Hochschule}, language = {de} } @periodical{OPUS4-4857, title = {Schwerpunkt Inkarnieren}, volume = {2017}, number = {8.2017, Heft 1}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-8-1}, pages = {217}, abstract = {Der Themenschwerpunkt des vorliegenden Heftes der Zeitschrift f{\"u}r Medien- und Kulturforschung wird bestritten von Autoren, die der DFG-Forschergruppe »Medien und Mimesis« angeh{\"o}ren, die an der Bauhaus-Universit{\"a}t Weimar angesiedelt, aber zus{\"a}tzlich {\"u}ber die Universit{\"a}ten Basel, Bielefeld, Bochum, M{\"u}nchen und Z{\"u}rich verteilt ist. Die Forschergruppe untersucht Mimesis als Kulturtechnik vor dem Hintergrund aktueller Entwicklungen in der Medienforschung, die Praktiken und Operationsketten als vorg{\"a}ngig gegen{\"u}ber den aus ihnen hervorgehenden Subjekt-Objekt-Dichotomien bzw. Subjekt-Werkzeug-Artefakt-Kausalit{\"a}ten ansehen. Die Auffassung von Mimesis als einer vielgestaltigen Kulturtechnik geht {\"u}ber die in den Kultur- und Literaturwissenschaften ebenso wie in der Philosophie dominierende {\"a}sthetische und epistemische Betrachtung der Mimesis hinaus und stellt das geschichtsphilosophische Selbstverst{\"a}ndnis der Moderne als eine grundlegend a-mimetische kulturelle und soziale Formation infrage. Mimesis und imitatio werden nicht l{\"a}nger in die Perspektive einer zu {\"u} berwindenden Vorgeschichte der Idee des sch{\"o}pferischen Menschen und seiner Werkherrschaft gestellt (Blumenberg). Anstatt die Mimesis in einen Gegensatz zur modernen Technik und der auf ihr beruhenden Zivilisation zu man{\"o}vrieren und das konstruktivistische Selbstverst{\"a}ndnis der Neuzeit kulturell zu verallgemeinern und absolut zu setzen, gehen die Projekte der Forschergruppe auf unterschiedlichen Feldern den seinsver{\"a}ndernden, transformatorischen Wirkungen medial gekoppelter mimetischer Praktiken und Verhaltensweisen zwischen dem 15. und dem 21. Jahrhundert nach. ...}, subject = {Medienwissenschaft}, language = {de} } @periodical{OPUS4-4858, title = {Schwerpunkt Operative Ontologien}, volume = {2017}, number = {8.2017, Heft 2}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-8-2}, pages = {212}, abstract = {Die vorliegende Ausgabe der Zeitschrift f{\"u}r Medien- und Kulturforschung verdankt sich einem Experiment. In Experimenten, wenigstens soweit es sich zun{\"a}chst um k{\"u}nstlerische und philosophische Prozeduren handelt, geht es, frei nach Jean-Fran{\c{c}}ois Lyotard, darum, herauszufinden, welchen Regeln die Verfahren selbst folgen, w{\"a}hrend man sie bereits anwendet, w{\"a}hrend man also danach sucht, welchen Regeln man folgt. In eben diesem Sinne bem{\"u}ht sich das vorliegende Heft um eine Kl{\"a}rung des Verfahrens »operativer Ontologien«. W{\"a}hrend in der Kunst das Werk selbst als eine dynamische Instanz der experimentellen Prozedur gelten kann, haben die Herausgeber hier jedoch einen etwas anderen Weg eingeschlagen, indem sie n{\"a}mlich verschiedene Texte in einem experimentellen Bezugsrahmen angefragt - und wunderbarerweise auch erhalten haben. Wunderbarerweise deshalb, weil sowohl in Philosophie und Kunst als auch in den Wissenschaften jedes Experiment nicht nur mit der Freude am Aufbauen und Einstellen der Apparaturen, Instrumente und Dispositive, am Basteln also, sondern auch mit erheblicher Zumutung und vielleicht einem kleinen Wagnis verbunden ist. Zudem ist zum Zeitpunkt seiner Unternehmung {\"u}ber seinen Ausgang noch nicht das Geringste bekannt. Im vorliegenden Fall, denn die Ver{\"o}ffentlichung ist selbstverst{\"a}ndlich das eigentliche Experiment, wissen wir alle also bis jetzt nichts {\"u}ber den Ausgang.}, subject = {Medienwissenschaft}, language = {de} } @phdthesis{Abeltshauser, author = {Abeltshauser, Rainer}, title = {Identification and separation of physical effects of coupled systems by using defined model abstractions}, doi = {10.25643/bauhaus-universitaet.2860}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28600}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The thesis investigates at the computer aided simulation process for operational vibration analysis of complex coupled systems. As part of the internal methods project "Absolute Values" of the BMW Group, the thesis deals with the analysis of the structural dynamic interactions and excitation interactions. The overarching aim of the methods project is to predict the operational vibrations of engines. Simulations are usually used to analyze technical aspects (e. g. operational vibrations, strength, ...) of single components in the industrial development. The boundary conditions of submodels are mostly based on experiences. So the interactions with neighboring components and systems are neglected. To get physically more realistic results but still efficient simulations, this work wants to support the engineer during the preprocessing phase by useful criteria. At first suitable abstraction levels based on the existing literature are defined to identify structural dynamic interactions and excitation interactions of coupled systems. So it is possible to separate different effects of the coupled subsystems. On this basis, criteria are derived to assess the influence of interactions between the considered systems. These criteria can be used during the preprocessing phase and help the engineer to build up efficient models with respect to the interactions with neighboring systems. The method was developed by using several models with different complexity levels. Furthermore, the method is proved for the application in the industrial environment by using the example of a current combustion engine.}, subject = {Strukturdynamik}, language = {en} } @article{AchenbachLahmerMorgenthal, author = {Achenbach, Marcus and Lahmer, Tom and Morgenthal, Guido}, title = {Global Sensitivity Analysis of Reinforced Concrete Walls Subjected to Standard Fire - A Comparison of Methods}, series = {14th International Probabilistic Workshop}, journal = {14th International Probabilistic Workshop}, pages = {97 -- 106}, abstract = {Global Sensitivity Analysis of Reinforced Concrete Walls Subjected to Standard Fire—A Comparison of Methods}, subject = {Angewandte Mathematik}, language = {en} } @article{AchenbachLahmerMorgenthal, author = {Achenbach, Marcus and Lahmer, Tom and Morgenthal, Guido}, title = {Identification of the thermal properties of concrete for the temperature calculation of concrete slabs and columns subjected to a standard fire—Methodology and proposal for simplified formulations}, series = {Fire Safety Journal 87}, journal = {Fire Safety Journal 87}, doi = {10.1016/j.firesaf.2016.12.003}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170331-30929}, pages = {80 -- 86}, abstract = {The fire resistance of concrete members is controlled by the temperature distribution of the considered cross section. The thermal analysis can be performed with the advanced temperature dependent physical properties provided by 5EN6 1992-1-2. But the recalculation of laboratory tests on columns from 5TU6 Braunschweig shows, that there are deviations between the calculated and measured temperatures. Therefore it can be assumed, that the mathematical formulation of these thermal properties could be improved. A sensitivity analysis is performed to identify the governing parameters of the temperature calculation and a nonlinear optimization method is used to enhance the formulation of the thermal properties. The proposed simplified properties are partly validated by the recalculation of measured temperatures of concrete columns. These first results show, that the scatter of the differences from the calculated to the measured temperatures can be reduced by the proposed simple model for the thermal analysis of concrete.}, subject = {Sensitivit{\"a}tsanalyse}, language = {en} } @article{AlaladeNguyenTuanWuttkeetal., author = {Alalade, Muyiwa and Nguyen-Tuan, Long and Wuttke, Frank and Lahmer, Tom}, title = {Damage identification in gravity dams using dynamic coupled hydro-mechanical XFEM}, series = {International Journal of Mechanics and Materials in Design}, journal = {International Journal of Mechanics and Materials in Design}, doi = {10.25643/bauhaus-universitaet.3596}, pages = {1 -- 19}, abstract = {Damage identification in gravity dams using dynamic coupled hydro-mechanical XFEM.}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Arboleda, author = {Arboleda, Pablo}, title = {Reckoning with Incompiuto Siciliano: Unfinished Public Works as Modern Ruins and All which it Entails}, doi = {10.25643/bauhaus-universitaet.3265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170715-32656}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {150}, abstract = {Since the end of the 1950s, Italy has focused part of its modernization on the erection of public works. Due to corruption, mafia, and further malpractice, this form of development has occasionally failed, producing a high number of constructions that have remained unfinished for decades. In 2007, the group of artists Alterazioni Video constructed an informal survey in the form of an on-line tool open to public contributions, which revealed that there are 395 unfinished public works in Italy from which 156, approximately 39.5\%, are located in Sicily alone. In view of such a statistic, Alterazioni Video opted to coin the term 'Incompiuto Siciliano' - literally 'Sicilian Incompletion' - to refer to unfinished public works as a formal architectural style. This re-interpretation, which aims to convey the recovered dignity of these 'modern ruins', considers unfinished public works a type of heritage with the potential to represent the entirety of Italian society. Furthermore, it goes as far as to say an unfinished public work is 'Incompiuto Siciliano' despite being located in another of the Italian regions. This doctoral dissertation embraces the artists' argument to develop a complete study of Incompiuto Siciliano by embedding this architectural style/artistic project within the main debates on modern ruins at present. This is important because it is expected to contribute to the revalorization and eventual recommissioning of unfinished sites by validating Incompiuto Siciliano in the realm of academia. Furthermore, this work aspires to be a worthwhile source of information for future investigations dealing with cultural interpretations of incompletion in any other context - a not unreasonable goal considering how unfinished works are one of the key urban topics after the 2008 financial crisis. Hence, this doctoral dissertation uses Incompiuto Siciliano to discuss a different perspective in each of the five chapters and, though these can be read as independent contributions, the objective is that all chapters read together, form a clear, concise, continuous unit. And so it must be said this is not a dissertation about unfinished public works in Italy; this is a dissertation about Incompiuto Siciliano as an artistic response to unfinished public works in Italy - which clearly requires an interdisciplinary analysis involving Urban Studies, Cultural Geography, Contemporary Archaeology, Critical Heritage and Visual Arts.}, subject = {Kulturerbe}, language = {en} } @article{Assmann, author = {Assmann, Aleida}, title = {Welche Zuk{\"u}nfte?}, doi = {10.25643/bauhaus-universitaet.3613}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171130-36136}, abstract = {Vortrag, gehalten am 20.04.2017 zur Einf{\"u}hrung von Prof. Dr. Winfried Speitkamp in das Amt des Pr{\"a}sidenten der Bauhaus-Universit{\"a}t Weimar}, subject = {Fortschritt}, language = {de} } @article{ChubukovKapitanovMoninaetal., author = {Chubukov, A. and Kapitanov, Valeriy and Monina, Olga and Silyanov, Valentin and Brannolte, Ulrich}, title = {Simulation of Regional Mortality Rate in Road Accidents}, series = {Transportation Research Procedia 20}, journal = {Transportation Research Procedia 20}, doi = {10.1016/j.trpro.2017.01.031}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170331-30956}, pages = {112 -- 124}, abstract = {The paper gives the results of scientific research, which, being based on probabilistic and statistical modeling, identifies the relationship of certain socio-economic factors and the number of people killed in road accidents in the Russian Federation regions. It notes the identity of processes in various fields, in which there is loss of life. Scientific methods and techniques were used in the process of data processing and study findings: systematic approach, methods of system analysis (algorithmization, mathematical programming) and mathematical statistics. The scientific novelty lies in the formulation, formalization and solving problems related to the analysis of regional road traffic accidents, its modeling taking into account the factors of socio-economic impact.}, subject = {Modellierung}, language = {en} } @article{ChubukovKapitanovMoninaetal., author = {Chubukov, A. and Kapitanov, Valeriy and Monina, Olga and Silyanov, Valentin and Brannolte, Ulrich}, title = {Calculation of Traffic Capacity of Signaled Intersections}, series = {Transportation Research Procedia 20}, journal = {Transportation Research Procedia 20}, doi = {10.1016/j.trpro.2017.01.032}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170401-30964}, pages = {125 -- 131}, abstract = {In order to calculate traffic capacity of signaled intersections, it was suggested to apply an approach based on the concept of congestions. The paper states examples of traffic capacity calculation.}, subject = {Verkehr}, language = {en} } @phdthesis{Conrad, author = {Conrad, Lisa}, title = {Organisation im soziotechnischen Gemenge - Mediale Umschichtungen durch die Einf{\"u}hrung von SAP}, publisher = {transcript Verlag}, address = {Bielefeld}, isbn = {978-3-8376-3784-7}, doi = {10.25643/bauhaus-universitaet.3107}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180503-31079}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {211}, abstract = {Der Alltag in Organisationen besteht vor allem aus den Medien und Technologien, mit denen die Koordination zwischen einzelnen Arbeitsabl{\"a}ufen hergestellt wird. Diese ethnografische Studie begleitet den Prozess der Einf{\"u}hrung eines SAP-Systems in einem mittelst{\"a}ndischen Unternehmen und zeigt, wie das bestehende Geflecht aus Praktiken und Technologien eine Neuanordnung erf{\"a}hrt. Dabei tritt das komplexe soziotechnische Gemenge zutage, auf dem Koordination und Organisation beruhen. Es geht um Hardware, ebenso wie Software, um mechanische und elektronische Medien, um Papiere, Drucker, Akten, Interfaces und Tastaturen, aber auch um die jahrzehntelang eingespielten Routinen und das Erfahrungswissen der Angestellten.}, subject = {Organisationsforschung}, language = {de} } @misc{Eckardt, author = {Eckardt, Frank}, title = {Sich in der ‚Krise' einrichten? Rezension zu J{\"o}rg Friedrich, Peter Haslinger, Somon Takasaki und Valentina Forsch (Hg.) (2017): Zukunft: Wohnen. Migration als Impuls f{\"u}r die kooperative Stadt. Berlin: jovis.}, series = {sub/urban. Zeitschrift f{\"u}r kritische Stadtforschung}, volume = {2017}, journal = {sub/urban. Zeitschrift f{\"u}r kritische Stadtforschung}, number = {Band 5, Heft 3}, doi = {10.25643/bauhaus-universitaet.3713}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171130-37139}, pages = {181 -- 184}, abstract = {Das rezensierte Buch stellt die zweite Publikation von J{\"o}rg Friedrich und seinem Team zum Thema Architektur und Fl{\"u}chtlinge dar. Darin werden vor allem Entwurfsvorschl{\"a}ge f{\"u}r eine hybride Stadt vorgestellt, f{\"u}r die eine multifunktionale Nutzung von Raum als Grundidee vorgeschlagen wird. Zudem diskutieren konzeptionelle Beitr{\"a}ge des Bandes, wie nach der ‚Willkommenskultur' im Jahr 2015 eine l{\"a}ngerfristige Perspektive f{\"u}r Integration eingenommen werden kann. Der Band fordert ein gr{\"o}ßeres Engagement der Architektur und einen interdisziplin{\"a}ren Diskurs ein, der sich der vielf{\"a}ltigen Aufgaben der Fl{\"u}chtlingsintegration annimmt.}, subject = {Stadtforschung}, language = {de} } @article{Eckardt, author = {Eckardt, Frank}, title = {Kassel ohne Athen: die documenta 14 zerbricht an ihrer Ortslosigkeit}, series = {sub/urban. Zeitschrift f{\"u}r kritische Stadtforschung}, volume = {2017}, journal = {sub/urban. Zeitschrift f{\"u}r kritische Stadtforschung}, number = {Band 5, Heft 3}, doi = {10.25643/bauhaus-universitaet.3715}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171219-37152}, pages = {157 -- 166}, abstract = {Dieser Artikel analysiert, in welcher Weise sich die Weltkunstausstellung documenta 14 mit dem {\"o}ffentlichen Raum in Kassel auseinandersetzte. Als Kritik an globalen Unrechtszust{\"a}nden konzipiert, ging die diesj{\"a}hrige Documenta nicht auf die lokalen Umst{\"a}nde in Kassel ein und benutzte die Stadt stattdessen als B{\"u}hne. Statt sich mit den konkreten Prozessen vor Ort auseinanderzusetzen, wie die Ausstellung dies in Athen getan hat, wird die Tradition der Documenta gebrochen, einen Beitrag zur gesellschaftlichen Stadtentwicklung leisten zu wollen.}, subject = {Kassel / Documenta}, language = {de} } @phdthesis{Ehrhardt, author = {Ehrhardt, Dirk}, title = {ZUM EINFLUSS DER NACHBEHANDLUNG AUF DIE GEF{\"U}GEAUSBILDUNG UND DEN FROST-TAUMITTELWIDERSTAND DER BETONRANDZONE}, doi = {10.25643/bauhaus-universitaet.3688}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171120-36889}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {235}, abstract = {Die Festigkeitsentwicklung des Zementbetons basiert auf der chemischen Reaktion des Zementes mit dem Anmachwasser. Durch Nachbehandlungsmaßnahmen muss daf{\"u}r gesorgt werden, dass dem Zement gen{\"u}gend Wasser f{\"u}r seine Reaktion zur Verf{\"u}gung steht, da sonst ein Beton mit minderer Qualit{\"a}t entsteht. Die vorliegende Arbeit behandelt die grunds{\"a}tzlichen Fragen der Betonnachbehandlung bei Anwendung von Straßenbetonen. Im Speziellen wird die Frage des erforderlichen Nachbehandlungsbedarfs von h{\"u}ttensandhaltigen Kompositzementen betrachtet. Die Wirkung der Nachbehandlung wird anhand des erreichten Frost-Tausalz-Widerstandes und der Gef{\"u}geausbildung in der unmittelbaren Betonrandzone bewertet. Der Fokus der Untersuchungen lag auf abgezogenen Betonoberfl{\"a}chen. Es wurde ein Modell zur Austrocknung des jungen Betons erarbeitet. Es konnte gezeigt werden, dass in einer fr{\"u}hen Austrocknung (Kapillarphase) keine kritische Austrocknung der Betonrandzone einsetzt, sondern der Beton ann{\"a}hrend gleichm{\"a}ßig {\"u}ber die H{\"o}he austrocknet. Es wurde ein Nomogramm entwickelt, mit dem die Dauer der Kapillarphase in Abh{\"a}ngigkeit der Witterung f{\"u}r Straßenbetone abgesch{\"a}tzt werden kann. Eine kritische Austrocknung der wichtigen Randzone setzt nach Ende der Kapillarphase ein. F{\"u}r Betone unter Verwendung von Zementen mit langsamer Festigkeitsentwicklung ist die Austrocknung der Randzone nach Ende der Kapillarphase besonders ausgepr{\"a}gt. Im Ergebnis zeigen diese Betone dann einen geringen Frost-Tausalz-Widerstand. Mit Zementen, die eine 2d-Zementdruckfestigkeit ≥ 23,0 N/mm² aufweisen, wurde unabh{\"a}ngig von der Zementart (CEM I oder CEM II/B-S) auch dann ein hoher Frost-Tausalz-Widerstand erreicht, wenn keine oder eine schlechtere Nachbehandlung angewendet wurde. F{\"u}r die Praxis ergibt sich damit eine einfache M{\"o}glichkeit der Vorauswahl von geeigneten Zementen f{\"u}r den Verkehrsfl{\"a}chenbau. Betone, die unter Verwendung von Zementen mit langsamere Festigkeitsentwicklung hergestellt werden, erreichen einen hohen Frost-Tausalz-Widerstand nur mit einer geeigneten Nachbehandlung. Die Anwendung von fl{\"u}ssigen Nachbehandlungsmitteln (NBM gem{\"a}ß TL NBM-StB) erreicht eine {\"a}hnliche Wirksamkeit wie eine 5 t{\"a}gige Feuchtnachbehandlung. Voraussetzung f{\"u}r die Wirksamkeit der NBM ist, dass sie auf eine Betonoberfl{\"a}che ohne sichtbaren Feuchtigkeitsfilm (feuchter Glanz) aufgespr{\"u}ht werden. Besonders wichtig ist die Beachtung des richtigen Auftragszeitpunktes bei k{\"u}hler Witterung, da hier aufgrund der verlangsamten Zementreaktion der Beton l{\"a}nger Anmachwasser abst{\"o}ßt. Ein zu fr{\"u}her Auftrag des Nachbehandlungsmittels f{\"u}hrt zu einer Verschlechterung der Qualit{\"a}t der Betonrandzone. Durch Bereitstellung hydratationsabh{\"a}ngiger Transportkenngr{\"o}ßen (Feuchtetransport im Beton) konnten numerische Berechnungen zum Zusammenspiel zwischen der Austrocknung, der Nachbehandlung und der Gef{\"u}geentwicklung durchgef{\"u}hrt werden. Mit dem erstellten Berechnungsmodell wurden Parameterstudien durchgef{\"u}hrt. Die Berechnungen best{\"a}tigen die wesentlichen Erkenntnisse der Laboruntersuchungen. Dar{\"u}ber hinaus l{\"a}sst sich mit dem Berechnungsmodell zeigen, dass gerade bei langsam reagierenden Zementen und k{\"u}hler Witterung ohne eine Nachbehandlung eine sehr d{\"u}nne Randzone (ca. 500 µm - 1000 µm) mit stark erh{\"o}hter Kapillarporosit{\"a}t entsteht.}, subject = {Beton}, language = {de} } @phdthesis{Fliegler, author = {Fliegler, Dominique}, title = {Kulturlandschaft als Palimpsest. Begreifen disparater Vergangenheiten}, doi = {10.25643/bauhaus-universitaet.3178}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170508-31782}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {286}, abstract = {Das Waldhufendorf Nakl{\´e}řov (Nollendorf) geh{\"o}rt, wie eine Vielzahl weiterer Orte im bis 1945 haupts{\"a}chlich von deutschsprachiger Bev{\"o}lkerung besiedelten tschechischen »Grenzgebiet«, zu jenen Orten, die heute aus der Perspektive verschiedener Akteure als verschwunden oder untergegangen beschrieben werden. Auf Grund ihres allgegenw{\"a}rtigen fragmentarischen Erhaltungszustands und der oft fehlenden Bausubstanz scheinen sie bei einer oberfl{\"a}chlichen Schau nicht als Interessensgebiete der Denkmalpflege in Frage zu kommen. Untersucht man sie mit den wertneutralen Analyse- und Inventarisierungsverfahren der Angewandten Historischen Geografie, so kommt man zu einem differenzierteren Ergebnis, das zum einen die Darstellung als verschwundene Orte fragw{\"u}rdig erscheinen l{\"a}sst und zum anderen zu einer Neufokussierung des Aspekts der Abwesenheit aus denkmalpflegerischer Sicht f{\"u}hrt. Im Verlauf der Bestandsaufnahme der gegenw{\"a}rtigen materiellen Verfasstheit des paradigmatisch untersuchten Ortes, der Gesamtschau des Noch-Vorhandenen als komplexem Netz unterschiedlichster Indizien, die sowohl auf historische Tiefenschichtungen als auch auf Abwesenheiten verweisen, hat sich gezeigt, dass der Ort Nakl{\´e}řov {\"u}ber vielf{\"a}ltige Relikte und Spuren verf{\"u}gt, die auf seine Entstehung sowie unterschiedliche historische Epochen und Z{\"a}suren verweisen. Basierend auf dem Palimpsest als Vorstellungsger{\"u}st und der Spurensuche als Leitmotiv einer verr{\"a}umlichten Geschichtsschreibung f{\"u}hrte der am Ort erprobte mikrohistorische Blick zu einer gesch{\"a}rften Perspektive auf verborgene und verschwundene Schichten und Objekte, auf sich r{\"a}umlich ausdr{\"u}ckende Machtverh{\"a}ltnisse und politische Z{\"a}suren. Zur Veranschaulichung wurden verschiedene M{\"o}glichkeiten einer GIS-basierten kartografischen Erfassung aufgezeigt, die der Besonderheit einer Landschaft der Leerstellen des 20. Jahrhunderts mit der W{\"u}stung eines Ortes vor dem Hintergrund der Zwangsmigration der deutschen Bev{\"o}lkerung und des politischen Regimewechsels nach 1945 gerecht werden sollte. In Fortf{\"u}hrung der Denkanst{\"o}ße von Norbert HUSE, den denkmalpflegerischen Leistungsbegriff in Frage zu stellen und auch Orte der Abwesenheit hinsichtlich ihrer potentiellen Denkmalwertigkeit zu hinterfragen, sowie in Ankn{\"u}pfung an das Konzept der European Landscape Convention (2004), auch Landschaftssch{\"a}den und die Vergegenw{\"a}rtigung nicht mehr vorhandener Landschaftscharakteristika in die Inventarisierung einzubeziehen, wurde im Untersuchungsgebiet der Kartierung stark gesch{\"a}digter und verschwundener Bereiche und Objekte besondere Aufmerksamkeit gewidmet. Den Ausgangspunkt bildete die Bestandsaufnahme der Kulturlandschaftselemente mit historischem Zeugniswert, die unabh{\"a}ngig von Kriterien wie Sch{\"o}nheit oder kunsthistorischer Wert erfasst wurden. Auf der Chronotop-Karte hingegen wurde die Genese des Ortes zur{\"u}ckverfolgt. Das gleichzeitige Nebeneinander ungleichzeitiger Elemente wurde in verschiedenen r{\"a}umlichen Ausschnitten hinsichtlich seiner Entwicklungsgeschichte analysiert, historisch kontextualisiert und auf Kontinuit{\"a}ten und Z{\"a}suren hin {\"u}berpr{\"u}ft. Dabei stand nicht die Eruierung eines kulturlandschaftlichen »Urtextes« im Fokus, sondern das Herausarbeiten von Zeitschichten. Eine Gr{\"u}ndung als Waldhufendorf von deutschen Siedlern um 1100, wie in den Dorfchroniken kolportiert, war nicht nachweisbar. Zu belegen ist, dass sich das im Kern mittelalterliche Dorf mit einer sp{\"a}testens in der ersten H{\"a}lfte des 17. Jh. planm{\"a}ßig angelegten Waldhufenstruktur bis zur Z{\"a}sur von 1945 {\"u}ber ca. 350 Jahre in dieser Form auch weiterentwickelt hat. Mit der Zwangsmigration der deutschsprachigen Bev{\"o}lkerung verschwand das »Pflegepersonal« der Kulturlandschaft. Auch durch die nachfolgende genossenschaftliche und milit{\"a}rische Nutzung ver{\"a}nderte sich der Ort fl{\"a}chendeckend. Die kleinteilige und durch pflanzliche Diversit{\"a}t gekennzeichnete Bewirtschaftung wich unter den neuen sozio-{\"o}konomischen Bedingungen einer monokulturellen Fl{\"a}chenbewirtschaftung. W{\"a}hrend die Teile des Flurbildes, die in funktionalem Zusammenhang mit der d{\"o}rflichen Siedlung standen, gr{\"o}ßtenteils verloren gegangen sind, wurde der Charakter des Verkehrskorridors hingegen noch verst{\"a}rkt. Der 1938 geplante Autobahnabschnitt auf der Trasse des pr{\"a}historischen Nollendorfer Passes wurde zu Beginn des 21. Jh. als Teil der A17 realisiert. Die zentrale Lage in einer Transitlandschaft erwies als entscheidend f{\"u}r die Entwicklung des Dorfes. Neben der Bedeutung als Handels- und Poststraße war die durch den Ort f{\"u}hrende Querung des Osterzgebirges milit{\"a}rstrategisch wichtig und wurde im Verlauf verschiedener Kriege sp{\"a}testens ab dem 11. Jh. bis 1945 rege genutzt. Mehrfach wurden Teile des Dorfes zerst{\"o}rt, doch im Gegensatz zur Z{\"a}sur nach 1945 erfolgte stets ein Wiederaufbau. Ernsthafte Bem{\"u}hungen einer Neubesiedlung im Zuge der Wiederbesiedlungspolitik im Grenzgebiet sind nicht zu verzeichnen. Vielmehr wurden fast 90\% des Geb{\"a}udebestands zwischen 1949-1964 als Abbruchh{\"a}user verkauft oder dem Verfall {\"u}berlassen. Heute existieren in Nakl{\´e}řov bauliche Zeugnisse in unterschiedlichen Erhaltungsgraden, die im Zusammenhang mit verschiedenen Phasen der Expansion, Stagnation und Regression in der Siedlungsentwicklung zu sehen sind. Die historische Bedeutung des Ortes ist nicht allein aus seiner fragmentarisch erhaltenen Geb{\"a}udesubstanz abzuleiten, sondern liegt in der Kontinuit{\"a}t der Geb{\"a}udestandorte und der Verbindung von Flur und Bauparzelle. In einem Waldhufendorf stellen die Lesesteinw{\"a}lle das materialisierte Ordnungsgef{\"u}ge dar. An ihnen wird der Dorfgrundriss mit seiner Parzellenstruktur erkennbar, der zur {\"a}ltesten materiellen geschichtlichen {\"U}berlieferung auf dem Lande geh{\"o}rt. Die bauliche Substanz tritt in ihrer Bedeutung in den Hintergrund, wird zum Inventar, das auf Grund besonderer Rahmenbedingungen ausgetauscht wird. Vielmehr ist es in Nakl{\´e}řov das durch die Lesesteinr{\"u}cken markierte Nichtmehrvorhandensein vieler baulicher Strukturen, das als Bestandteil des historischen Zeugniswertes des Ortes zu bewerten ist. Die Lesesteinr{\"u}cken sind nicht nur Spuren im Sinne von siedlungsgeschichtlich relevanten {\"U}berresten, sondern zugleich auch Spuren im Sinne von materiellen Anhaltspunkten, die Abwesenheit bezeugen und {\"u}ber das impulsgebende Potential verf{\"u}gen, diese Abwesenheit zu hinterfragen und dem spurenbildenden Geschehen nachzusp{\"u}ren. Das f{\"u}r Nakl{\´e}řov pr{\"a}gnante ubiquit{\"a}re Zusammenspiel von an- und abwesenden Objekten wurde auf einer eigens entwickelten, auch auf andere Orte (im Grenzgebiet) {\"u}bertragbaren Kartierung (KE) festgehalten, in der die Materialstr{\"o}me 1945-2012 dokumentiert wurden. Aktuell durch materielle Konstellationen markierte Orte der Leere wurden dechiffriert, indem Relikte nach Zeitschichten gestaffelt mit Visualisierungen verschwundener Objekte hinterlegt wurden. Die {\"u}ber materielle {\"U}berreste transportierte Erfahrung von Abwesenheit wird auch an scheinbar kontext- und funktionslosen Elementen deutlich. Dazu geh{\"o}rt in Nakl{\´e}řov z.B. ein Parkplatz, dessen Verwendungszweck zwar eindeutig ist, wohingegen sich seine Funktion an diesem Ort nicht ohne Hinzuziehung von Quellen erschließt. Ihn als Erwartungen st{\"o}rendes Element, dem eine »verd{\"a}chtige Abwesenheit« inh{\"a}rent ist, aufzufassen und als unabsichtliche Hinterlassenschaft zu hinterfragen, hat den Anstoß zur erinnerungskulturellen Dechiffrierung der banal anmutenden Fl{\"a}che gegeben. Das Weiterverfolgen seiner Spur hat verschiedene Strategien der Verdr{\"a}ngung von erinnerungsst{\"u}tzenden und wahrnehmungslenkenden Artefakten und Zeichensetzungen sowie das dynamische und teils antagonistische Beziehungsgeflecht der sich in diesem r{\"a}umlichen Ausschnitt befindlichen Objekte offengelegt. Neben Beschriftungen an einem Aussichtsturm und einem Schlachtendenkmal, deren Wechsel sich ver{\"a}ndernde gesellschaftspolitische Bedingungen des 20. Jh. reflektieren, ist es ein »dichter Ort«, dessen geografische Lage zum Versuch einer ged{\"a}chtnispolitischen Umcodierung und r{\"a}umlichen Verankerung eines neuen Geschichtsnarrativs gef{\"u}hrt hat. Der heute durch ein Holzkreuz markierte Ort war 300 Jahre lang Standort einer sakralen Landschaftsdominante, die 1975 in Vorbereitung der Installation eines Sowjetdenkmals gesprengt wurde. Die Planungsunterlagen belegen, dass ein Zulassen r{\"a}umlich sichtbarer Erinnerungskonkurrenzen auszuschließen war und eine politisch motivierte Neubesetzung des Ortes unter besonderer Ber{\"u}cksichtigung seiner in die Landschaft ausgreifenden Raumwirkung angestrebt war. Einer der wenigen materiellen {\"U}berreste, die auf die Geschichte zur Errichtung des gr{\"o}ßten Sowjetdenkmals in Nordb{\"o}hmen verweisen, ist der Parkplatz. Vor allem an diesem Beispiel hat sich auch gezeigt, dass der sich aus einem feinen Gespinst unterschiedlichster materieller Konstellationen zusammensetzende Ort als Geschichtsquelle nur bedingt anschaulich und »lesbar« ist. Neben die Bestimmung des historischen Zeugniswertes des Untersuchungsgebietes durch kartierte und »erz{\"a}hlte Geschichte« trat so zwangsl{\"a}ufig auch der Subtext einer Beschreibung des Prozesses der Spureninterpretation. Dieser »dichte Ort« ist heute ein Ort aktiver objektgebundener Gedenkpraktiken, der durch eine Koexistenz von Erinnerungsstr{\"a}ngen gekennzeichnet ist und von unterschiedlichen Akteuren genutzt wird. Die zweisprachige Tafel am Schlachtendenkmal, Pl{\"a}ne zur Wiedererrichtung des Aussichtsturms und zu Baumaßnahmen unter Ber{\"u}cksichtigung der historischen Siedlungsstruktur deuten auf eine wachsende Akzeptanz des kulturhistorischen Erbes der deutschsprachigen Bev{\"o}lkerung hin. Auch verschiedene tschechische Projekte zur Dokumentation des Grenzgebiets, einschließlich der Erfassung dessen, was zerst{\"o}rt oder nur noch in {\"U}berresten vorhanden ist, belegen die Bereitschaft, sich mit der Geschichte der Landschaft auseinanderzusetzen. Orte, an denen die Erfahrung von Abwesenheit und Leere auf den fl{\"a}chendeckend offensichtlichen Bruch im Grenzland verweist, beinhalten das Potential als »storyscape« zu fungieren und ein an den Raum r{\"u}ckgebundenes Erz{\"a}hlen von erinnerungskulturell und sozial bedeutsamen »Geschichten« zu initiieren. Der m{\"o}gliche Denkmalwert eines Ortes wie Nakl{\´e}řov als repr{\"a}sentativer und zugleich singul{\"a}rer Bestandteil einer historischen Kulturlandschaft besteht in seinem Verm{\"o}gen, Fragen aufzuwerfen und eine Besch{\"a}ftigung mit der Geschichte des Ortes im lokalen, regionalen und europ{\"a}ischen Kontext einzuleiten. Das denkmalpflegerische Kriterium der Leistung manifestiert sich nicht im Objekt, sondern im Potential eines bestimmten r{\"a}umlichen Ausschnitts, erinnerungskulturelle Prozesse und angesichts »umstrittener« oder »geteilter« Objekte und Orte Dialoge in Gang zu setzen. Ein Ort, dessen historischer und erinnerungskultureller Wert aus dem Spannungsfeld zwischen an- und abwesenden Elementen, zwischen Leerstellen und Relikten resultiert, f{\"u}hrt an die Grenzen traditioneller Denkmalbegrifflichkeiten, ist aber auf der Basis der Zusammenschau verschiedener theoretischer und praktischer Ans{\"a}tze der Denkmalpflege, die unter dem Begriff »unbequeme Kulturlandschaft« zu subsumieren sind, in seiner potentiellen Denkmalw{\"u}rdigkeit zu diskutieren. Die Grenzen dessen, was Denkmal sein kann, sind zwar seit den 1970er Jahren r{\"a}umlich, substanziell und ideell durchl{\"a}ssiger geworden, werden aber immer noch von Anspr{\"u}chen an die materielle Substanz des Denkmals und an das Denkmal als Zeugnis von Leistung markiert. Auch HUSE sieht in der Bindung der Denkmalpflege »an die materielle Spur« sowohl eine St{\"a}rke als auch eine Schw{\"a}che: »Wo es diese nicht mehr gibt, kann es auch keine Denkmalpflege mehr geben.« Aber Denkmalpflege kann es auch dort geben, wo die Spur in existentieller Abh{\"a}ngigkeit vom Vorhandensein der sie umgebenden Substanz als interpretationsoffenes Zeitfenster im Raum verstanden wird. Die Spur ist an das Vorhandensein von materieller Substanz gebunden, denn ohne diese w{\"a}re die Spur weder pr{\"a}sent noch wahrnehmbar. Spuren sind dergestalt als Ensembles zu begreifen, die aus einer Leerstelle sowie der sie umgebenden, sie hervorbringenden und auf sie verweisenden materiellen Umgebung bestehen. F{\"u}r den Denkmalpfleger als Spurenleser st{\"u}nde somit das sich {\"u}ber das Materielle ausdr{\"u}ckende Spannungsfeld zwischen Absenz und Pr{\"a}senz im Fokus, das unter den Vorzeichen des Erinnerns und Vergessens f{\"u}r den kulturwissenschaftlichen Erinnerungs- und Ged{\"a}chtnisdiskurs von Bedeutung ist. Ein umfassender Spurenbegriff w{\"a}re dem Substanzbegriff als Korrektiv zur Seite zu stellen, mit dem Potential, auf Abwesenheit als Resultat von destruktiven Einwirkungen hinzuweisen, Fragen auch nach (un)freiwilligen Zeugnissen, Kontexten, Ursachen, Menschen und ihrem Handeln aufzuwerfen, und dabei dennoch den Konnex zum Materiellen halten zu k{\"o}nnen. Ein Spurenbegriff, der {\"u}ber das Oszillieren der Spur zwischen {\"a}sthetischem und historischem Wert hinausgeht, verweisend auf tiefgreifende Verluste und Zerst{\"o}rungsprozesse, scheint dazu geeignet, die Funktion des Denkmals auch als »Erinnerung an Br{\"u}che, Unsch{\"o}nes und Schwieriges, an Niederlagen und Irrwege, aber auch an Alternativen« zu st{\"a}rken, die denkmalpflegerische Kanonbildung sowie Kernbegriffe der Disziplin wie Substanz und Leistung hinsichtlich ihrer generellen Anwendbarkeit auf die bestehende und potentielle Denkmalwelt zu hinterfragen. Orte und Objekte abseits traditioneller Vorstellungen vom Denkmal erfordern eine Neufokussierung des Substanzbegriffs, um eine komplexere und vielschichtige, auch konfligierende Deutungen zulassende Kultur- und Geschichtsbetrachtung zu erm{\"o}glichen. Eine Denkmalpflege als wissenschaftlich verankerte Disziplin, die sich mit ihren vielf{\"a}ltigen materialbasierten und verorteten Medien der Erinnerung, st{\"a}rker in den f{\"a}cher- und l{\"a}ngst auch grenz{\"u}bergreifenden Erinnerungsdiskurs einbringen will, braucht zu Beginn des 21. Jh. nach den Verwerfungen des 20. Jh. noch andere Orientierungspunkte, um sich auch in disparaten, auch von Destruktion gepr{\"a}gten Kulturr{\"a}umen bewegen zu k{\"o}nnen.}, subject = {Kulturlandschaft}, language = {de} } @article{Fuchkina2017, author = {Fuchkina, Ekaterina}, title = {Pedestrian Movement Graph Analysis}, doi = {10.25643/bauhaus-universitaet.2738}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170202-27381}, pages = {21}, year = {2017}, abstract = {Development of sustainable urban environments assumes processing of large amount of data from various sources. It could be field study observations, results of simulations or information provided by modeling. This paper focuses on processing modeled data of pedestrian movement based on existed axial maps of particular environment. Introduced component allows further analysis by calculation of set of metrics based on inverted graph, which is built from given paths.}, subject = {Fussg{\"a}nger}, language = {en} } @article{GoebelLahmerOsburg, author = {G{\"o}bel, Luise and Lahmer, Tom and Osburg, Andrea}, title = {Uncertainty analysis in multiscale modeling of concrete based on continuum micromechanics}, series = {European Journal of Mechanics-A/Solids}, journal = {European Journal of Mechanics-A/Solids}, abstract = {Uncertainty analysis in multiscale modeling of concrete based on continuum micromechanics}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Hahn, author = {Hahn, S{\"o}nke}, title = {Bunker—TV, TV—Bunker: Heterotope Mechanismen am Beispiel von Schutzbauwerken und (Fernseh-)Serien}, doi = {10.25643/bauhaus-universitaet.3711}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171205-37116}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {376 + 256}, abstract = {Die vorliegende Dissertation widmet sich anhand eines kurios anmutenden, aber auf einer Metaebene fruchtbaren Vergleichs von Schutzbauwerken und Fernsehserien historischen und aktuellen Mechanismen menschlichen Denkens und Handelns. Als theoretische Basis dieser Abhandlung fungiert die Heterotopie - ein Konzept des franz{\"o}sischen Philosophen Michel Foucault. Die Heterotopie ist ein inflation{\"a}r gebrauchtes, oft nur oberfl{\"a}chlich betrachtetes Theorem. Das Konzept wird hier nun mit Blick auf das Gesamtwerk Foucaults en d{\´e}tail untersucht sowie um korrelierende Ans{\"a}tze (Aug{\´e}, Lefebvre, Soja ...) erg{\"a}nzt. Aus dieser Betrachtung l{\"a}sst sich ein {\"u}ber Foucault hinausgehender, analytisch nutzbarer Katalog ableiten. Verk{\"u}rzt wird die Heterotopie folgendermaßen bestimmt: Neben der Definition der Heterotopie als Raum des Anderen, als (gesellschaftskritischer) Gegenraum kann sie dem wie auch immer bestimmten Normalraum unterstellt sein. Die Heterotopie ist m{\"o}glicherweise eine bauliche Manifestation schwarz-weißen Denkens, von Ausgrenzung und sichtbarer Unsichtbarkeit, sie wird zur Realisation wie auch immer definierter Ideale oder Stereotypen. Die Heterotopie ist allerdings auch als ein (hybrides) Dazwischen denkbar, welches sich als katalytischer Raum, im dialektischen Sinne als Ort der Synthese {\"a}ußert. Es k{\"o}nnte als Niemandsland oder als Phase (im Leben) charakterisiert werden. Analog zum letzten Beispiel l{\"a}sst sich die Heterotopie als progressiv-seriell beschreiben. Ihre stagnierend bis variierende Serialit{\"a}t kann sich im Betreten identischer R{\"a}ume {\"a}ußern - mal als verl{\"a}sslich oder erm{\"u}dend empfunden. Nicht nur die einem entsprechenden Raum entgegengebrachten Konnotationen sind vielf{\"a}ltig bis ambivalent, die Heterotopie ist neben real-r{\"a}umlicher auch virtueller Fasson: Betonmauer finden bisweilen eine Entsprechung im einfachen Harmoniefernsehen. Einander heterotop gegen{\"u}berstehenden R{\"a}umen wird etwa mit der Figur Walter White in der komplexen Fernsehserie "Breaking Bad" entsprochen - ist er doch hin und her gerissen zwischen seiner biederen, aber geliebten Familie einerseits und der abstoßend gewaltt{\"a}tigen, aber extrovertierende Potentiale bergenden Drogenproduktion andererseits. Die sogenannte Leihk{\"o}rperschaft bzw. die Immersion lassen sich zur Beschreibung verschiedener Heterotopie-Erfahrungen nutzen. Dieses Eintauchen/Betreten wird hier als Rezeptionsph{\"a}nomen zwischen sensomotorischer Illusion und inhaltlich-narrativem Sog, zw. Fixierung des K{\"o}rpers und Einbezug desselbigen definiert. Die beiden Untersuchungsfelder werden jeweils f{\"u}r sich historisch und theoretisch umrissen. Zum noch jungen Feld serieller Theorie/der Definition narrativer Typen (im TV bzw. dem Qualit{\"a}tsfernsehen) wird ein einf{\"u}hrender {\"U}berblick geboten. Die praktischen Arbeiten setzen sich {\"a}sthetisch, narrativ und inhaltlich mit der Heterotopie auseinander: In "Habitat" und "Habitat 2" werden serielle Konzepte audiovisuell (u. a. als Fulldome-Version) erprobt. Dabei wird insbesondere das Heterotope im Konzept "Autor" untersucht - der Autor als distinkte und gleichsam konfliktbehaftete, in zahlreiche Subjekte zerlegte Figur. "Habitat 3" ist ein Publikationskonzept, welches mit etablierten (heterotopen) Strukturen des Sammelbands bricht und zugleich die heterotopen Facetten des fiktionalen Fernsehens simuliert. Band I beinhaltet sowohl den theoretischen Teil der Promotion als auch die Erl{\"a}uterung der praktischen Arbeiten. Band II erm{\"o}glicht einen Einblick in die konzeptionellen Prozesse hinter den drei k{\"u}nstlerischen Projekten.}, subject = {Heterotopie}, language = {de} } @phdthesis{Heidenreich, author = {Heidenreich, Manuel}, title = {Untersuchungen zur Sauerstoffbereitstellung mit Perowskit- Keramik-Sch{\"u}ttungen in einem Festbett-Reaktor}, doi = {10.25643/bauhaus-universitaet.3607}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171027-36077}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {154}, abstract = {Diese Arbeit belegt, dass die Belastungen auf reversibel arbeitende keramische Materialien sehr gering ausfallen. Die regenerative Sauerstoffbereitstellung stellt damit grunds{\"a}tzlich niedrigere Anforderungen an die keramischen Perowskit-Materialien zur Sauerstofferzeugung als die Membrantechnologie. Das Absinken der Diffusionskoeffizienten bei niedrigen Temperaturen ist deutlich weniger nachteilig als bei den Membranen die vergleichbare Materialien nutzen. Dies konnte gezeigt werde, indem mit der die O 2 -Entladetechnik und -Beladetechnik im Vergleich zur O 2 -Abtrennung durch keramische Membranen bei vergleichsweise niedrigen Temperaturen bereits große O 2 -Mengen erzeugt werden k{\"o}nnen. Infolge der niedrigen Temperaturen bestehen keine Probleme mit Reaktionen zwischen dem sauerstoffbereitstellenden Material und den Reaktorwerkstoffen. Dadurch gestaltet sich die Einbindung und Nutzung von Festbett-Sch{\"u}ttungen denkbar einfach. Im Vergleich dazu sind die Anbindung und der Betrieb von d{\"u}nnen keramischen Membranen in einem Reaktor deutlich aufwendiger. Es ist weniger Peripherie und verfahrenstechnischer Aufwand zur Sauerstoffabtrennung durch reversibel arbeitende Materialien n{\"o}tig als bei der kryogenen Luftzerlegung, der Druckwechseladsorption oder den Membrantechnologien. Die regenerative Sauerstoffbereitstellung kann sowohl bei neuen als auch bestehenden Anlagen, die Sauerstoff ben{\"o}tigen implementiert werden. Damit ist es m{\"o}glich den Transport des Sauerstoffs entfallen zu lassen. Eine partielle Phasenumwandlung des BSCF8020 bei erh{\"o}hter Temperatur und hohem Sauerstoffangebot spielt f{\"u}r die regenerative Sauerstoffbereitstellung eine untergeordnete Rolle, da die n{\"o}tigen Zieltemperaturen (450 ggf. bis 650 °C) zur O 2 -Beladung und -Entladung niedriger sind, als der Temperaturbereich in dem die Zersetzung auftreten kann (750 bis 800 °C). Des Weiteren ist die Zeitspanne (O 2 -Beladungsteilzyklus) in der das BSCF8020 ausreichend hohen Sauerstoffgehalten (p O2 > 10 -3 bar) ausgesetzt ist, zu kurz um diese Umwandlungen zu vollziehen. Der O 2 -Entladungsteilzyklus sorgt zus{\"a}tzlich immer daf{\"u}r, dass sich u. U. beginnende Zersetzung zur{\"u}ckbildet, da die kubische Phase in Richtung niedrigerer p O2 stabilisiert wird. Es konnte belegt werden, dass die elektronische Steuerung des zyklischen Sauerstoffausbaus und -einbaus beherrschbar ist. Der hohe Abtrenngrad der keramischen Materialien f{\"u}hrt dazu, dass der Sauerstoff elektrolytisch rein zu Verf{\"u}gung gestellt wird. Grunds{\"a}tzlich sind weitere Forschungen zur Steigerung der Sauerstoffmengen, die pro eingesetzter Masseeinheit an Keramik gewonnen werden k{\"o}nnen, immer anzustreben, da damit u. U. der Materialeinsatz weiter gesenkt oder auch die energetischen Aufwendungen weiter reduziert werden k{\"o}nnen. Bei dem, f{\"u}r die multizyklischen Untersuchungen dieser Arbeit ausgew{\"a}hlten BSCF8020(SVT) hat die Cobalt-Komponente mit ca. 80 \% den {\"u}berwiegenden Kostenanteil am Sauerstoff bereitstellenden Material. BSCF-Keramiken mit h{\"o}herem Eisen-Anteil sollten f{\"u}r multizyklische Anwendungen in Festbett-Reaktoren einer vertiefenden Charakterisierung unterzogen werden, um weitere geeignete Perowskite mit niedrigen Materialkosten zu erschließen.}, subject = {Perowskit}, language = {de} } @phdthesis{Hogan, author = {Hogan, Trevor}, title = {Data and Dasein - A Phenomenology of Human-Data Relations}, doi = {10.25643/bauhaus-universitaet.2905}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170323-29056}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In contemporary society, data representation is an important and essential part of many aspects of our daily lives. This thesis aims to contribute to our understanding on how people experience data and what role representational modality plays in the process of perception and interpretation. This research is grounded in phenomenology - I align my theoretical exploration to ideas and concepts from philosophical phenomenology, while also respecting the essence of a phenomenological approach in the choice and application of methods. Alongside offering a rich description of people's experience of data representation, the key contributions I claim transcend four areas: theory, methods, design, and empirical findings. From a theoretical perspective, besides describing a phenomenology of human-data relations, I define, for the first time, multisensory data representation and establish a design space for the study of this class of representation. In relation to methodologies, I describe and deploy two methods to investigate different aspects of data experience. I blend the Repertory Grid technique with a focus group session and show how this adaption can be used to elicit rich design relevant insight. I also introduce the Elicitation Interview technique as a method for gathering detailed and precise accounts of human experience. Furthermore, I describe for the first time, how this technique can be used to elicit accounts of experience with data. My contribution to design relates to the creation of a series of bespoke data-driven artefacts, as well as describing an approach to design that I call Design Probes, which allows researchers to focus their enquiry on specific design features. To answer the research questions I set out in this thesis, I report on a series of empirical studies that used the aforementioned methods. The findings of these studies show, for instance, how certain representational modalities cause us to have heightened awareness of our body, some are more difficult to interpret than others, some rely heavily on instinct and each of them solicit us to reference external events during the process of interpretation. I conclude that a phenomenology of human-data relations show how representational modality affects the way we experience data, it also shows how this experience unfolds and it offers insight into particular moments such as the formation of meaning.}, subject = {Design}, language = {en} } @phdthesis{Hollberg, author = {Hollberg, Alexander}, title = {A parametric method for building design optimization based on Life Cycle Assessment}, doi = {10.25643/bauhaus-universitaet.3800}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180928-38000}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {262}, abstract = {The building sector is responsible for a large share of human environmental impacts. Architects and planners are the key players for reducing the environmental impacts of buildings, as they define them to a large extent. Life Cycle Assessment (LCA) allows for the holistic environmental analysis of a building. However, it is currently not employed to improve the environmental performance of buildings during the design process, although the potential for optimization is greatest there. One main reason is the lack of an adequate means of applying LCA in the architectural design process. As such, the main objective of this thesis is to develop a method for environmental building design optimization that is applicable in the design process. The key concept proposed in this thesis is to combine LCA with parametric design, because it proved to have a high potential for design optimization. The research approach includes the analysis of the characteristics of LCA for buildings and the architectural design stages to identify the research gap, the establishment of a requirement catalogue, the development of a method based on a digital, parametric model, and an evaluation of the method. An analysis of currently available approaches for LCA of buildings indicates that they are either holistic but very complex or simple but not holistic. Furthermore, none of them provide the opportunity for optimization in the architectural design process, which is the main research gap. The requirements derived from the analysis have been summarized in the form of a catalogue. This catalogue can be used to evaluate both existing approaches and potential methods developed in the future. In this thesis, it served as guideline for the development of the parametric method - Parametric Life Cycle Assessment (PLCA). The unique main feature of PLCA is that embodied and operational environmental impact are calculated together. In combination with the self-contained workflow of the method, this provides the basis for holistic, time-efficient environmental design optimization. The application of PLCA to three examples indicated that all established mandatory requirements are met. In all cases, environmental impact could be significantly reduced. In comparison to conventional approaches, PLCA was shown to be much more time-efficient. PLCA allows architects to focus on their main task of designing the building, and finally makes LCA practically useful as one of several criteria for design optimization. With PLCA, the building design can be time-efficiently optimized from the beginning of the most influential early design stages, which has not been possible until now. PLCA provides a good starting point for further research. In the future, it could be extended by integrating the social and economic aspects of sustainability.}, subject = {Bauentwurf}, language = {en} } @article{JentschKulleBodeetal., author = {Jentsch, Mark F. and Kulle, Christoph and Bode, Tobias and Pauer, Toni and Osburg, Andrea and Namgyel, Karma and Euthra, Karma and Dukjey, Jamyang and Tenzin, Karma}, title = {Field study of the building physics properties of common building types in the Inner Himalayan valleys of Bhutan}, series = {Energy for Sustainable Development 38}, journal = {Energy for Sustainable Development 38}, doi = {10.25643/bauhaus-universitaet.3139}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170419-31393}, pages = {48 -- 66}, abstract = {Traditionally, buildings in the Inner Himalayan valleys of Bhutan were constructed from rammed earth in the western regions and quarry stone in the central and eastern regions. Whilst basic architectural design elements have been retained, the construction methods have however changed over recent decades alongside expectations for indoor thermal comfort. Nevertheless, despite the need for space heating, thermal building performance remains largely unknown. Furthermore, no dedicated climate data is available for building performance assessments. This paper establishes such climatological information for the capital Thimphu and presents an investigation of building physics properties of traditional and contemporary building types. In a one month field study 10 buildings were surveyed, looking at building air tightness, indoor climate, wall U-values and water absorption of typical wall construction materials. The findings highlight comparably high wall U-values of 1.0 to 1.5 W/m²K for both current and historic constructions. Furthermore, air tightness tests show that, due to poorly sealed joints between construction elements, windows and doors, many buildings have high infiltration rates, reaching up to 5 air changes per hour. However, the results also indicate an indoor climate moderating effect of more traditional earth construction techniques. Based on these survey findings basic improvements are being suggested.}, subject = {Luftdichtheit}, language = {en} } @phdthesis{JimenezGonzalez, author = {Jim{\´e}nez Gonz{\´a}lez, Camilo Arturo}, title = {Bogot{\´a} as a Spatial Sign: A Semiotic Reading of Urban Centrality in Latin America}, doi = {10.25643/bauhaus-universitaet.3249}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170711-32492}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This project proposes and applies a research strategy to understand types of cities using the case study of Bogot{\´a}. This strategy combines a conceptual framework developed around the notion of 'centrality' and 'urban semiotics' as a method of qualitative enquiry in order to comprehend complex spatial arrangements as significant constituents of cultural geographies. In this sense, this study problematizes current tendencies such as spatial fragmentation and challenges the argument that contemporary urban ensembles in Latin America are either homogenized within globalization trends or illegible entities with no structural coherence. Bogot{\´a} is addressed as an instrumental case study to redraw generalizations developed from different methodological frameworks about the configuration process of spatial structures and their significance within the Latin American geography. Thus the study questions how urban centrality has evolved as an essential socio-cultural phenomenon and in this manner decodes the messages transmitted by main spatial arrangements. As a first step, the study discusses the construction of spatial meaning and its structural interpretation. In addition, the concept of centrality is examined in depth and an urban centrality typology is introduced to enable the analysis of spatial structures in socio-cultural terms. These contents are followed by the discussion of the existing approaches to the topic and their limitations. Subsequently, this research reconstructs the configuration of Bogot{\´a}'s spatial structure which is decoded in the last chapter. The study concludes that the highly fragmented and uneven condition of urban space in Latin America can be read. The case study of Bogot{\´a} substantiates that there is a code that paradoxically provides spatial cohesiveness within unstable socio-spatial hierarchies. Such a spatial code is deciphered through the reading of Bogot{\´a}'s spatial structure whose super-centre denotes 'the sacralisation of authoritarianism'. This is a 'structural meaning' related to a specific or intrinsic logic of spatial concentration that is useful for the further discussion of socio-spatial patterns and the meanings of Latin American cities. The concluding remarks integrate the main arguments and outline lines of action in spatial planning processes.}, subject = {Stadtentwicklung}, language = {en} } @article{KaernBiederstedt, author = {Kaern-Biederstedt, Franz}, title = {Materialien zum Aufsatz "Zwei Pater noster-Vertonungen von Melchior Vulpius und die Missa V. vocum super Pater noster qui es in Coelis Melchioris Vulpii von Georg Vintz" - Begleitmaterial zum Aufsatz im Tagungsband}, editor = {Goltz, Maren}, doi = {10.25643/bauhaus-universitaet.3250}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170711-32501}, abstract = {Im Aufsatz "Zwei Pater noster-Vertonungen von Melchior Vulpius und die Missa V. vocum super Pater noster qui es in Coelis Melchioris Vulpii von Georg Vintz" werden Pater noster-Vertonungen aus dem OPUSCULUM NOVUM SELECTISSIMARVUM CANTIONVM SACRARVM (Erfurt 1610) und aus der PARS PRIMA CANTIONVM SACRARVM (Jena 1602) des Weimarer Kantors und Komponisten Melchior Vulpius (1570 - 1615) besprochen und miteinander verglichen. Ebenso wird untersucht, in welcher Weise der Naumburger Organist Georg Vintz (ca. 1580 - ca. 1635) eine dieser Motetten als Grundlage f{\"u}r die Parodiemesse "MISSA V. VOCUM,Super Pater noster [...] Melchioris Vulpii" genutzt und bearbeitet hat. Der Aufsatz beruht auf einem Vortrag bei einer Tagung {\"u}ber Vulpius, die 2015 in Meiningen stattfand. Der Tagungsband, den Maren Goltz herausgeben wird, erscheint vermutlich 2018. Da im Band nicht gen{\"u}gend Platz f{\"u}r ausf{\"u}hrliche Notenbeispiele ist, werden die besprochenen Kompositionen vollst{\"a}ndig als Noten- und Klangdateien durch diesen Permalink zur Verf{\"u}gung gestellt.}, subject = {Musikwissenschaft}, language = {de} } @inproceedings{KleinerWiegandOsburg, author = {Kleiner, Florian and Wiegand, Torben and Osburg, Andrea}, title = {Eigenschaftsentwicklung epoxidharzmodifizierter M{\"o}rtel auf Zementbasis bei unterschiedlichen klimatischen Bedingungen}, series = {Tagung Bauchemie der GDCh-Fachgruppe Bauchemie, 18.-20. September 2017 in Weimar}, booktitle = {Tagung Bauchemie der GDCh-Fachgruppe Bauchemie, 18.-20. September 2017 in Weimar}, publisher = {Gesellschaft Deutscher Chemiker}, isbn = {978-3-947197-02-6}, doi = {10.25643/bauhaus-universitaet.4506}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211004-45067}, pages = {4}, abstract = {Zur Erstellung von dekorativen Plastiken sollten M{\"o}rtel entwickelt werden, die eine hohe Biegezugfestigkeit aufweisen und eine breite Palette von Konsistenzen f{\"u}r verschiedene Anwendungsarten, wie Gießen, Spachteln oder Stampfen abdecken. Als Basis f{\"u}r die Rezepturen wurde ein niedrigviskoses Epoxidharzsystem gew{\"a}hlt, dessen Aminh{\"a}rter einen Wasseranteil von 44 \% beinhaltet. Dies erm{\"o}glichte es, durch Wasserzugabe verschiedene Viskosit{\"a}ten einzustellen. Um dieses Wasser in massiveren Bauteilen zu binden, wurde neben Sand auch Zement als F{\"u}llstoff eingesetzt. Die erstellten Rezepturen zeigten nach 56 Tagen hohe Druckfestigkeiten von {\"u}ber 50 N/mm². Mit zunehmendem Epoxidharzgehalt ergaben sich zwar steigende Biegezugfestigkeiten, jedoch unter Laborlagerung auch gr{\"o}ßere L{\"a}ngen{\"a}nderungen. Diese konnten durch den Einsatz eines PCE-Fließmittels, PVA-Kurzfasern und einer optimierten Sieblinie verringert werden. Das Fließmittel verl{\"a}ngerte die Erh{\"a}rtungszeiten jedoch auf bis zu 1,5 Tage. Zur Ermittlung der Dauerhaftigkeit des Materials wurde es f{\"u}r drei Wochen Temperaturen von -20 bis +60 °C, einer k{\"u}nstlichen Sonnenbestrahlung sowie k{\"u}nstlicher Beregnung ausgesetzt. Im Vergleich zur Laborlagerung ergab sich bei steigendem Epoxidharzanteil ein geringerer Schwund, w{\"a}hrend die Biegezugfestigkeit der Probek{\"o}per nur geringf{\"u}gig abnahm. Rasterelektronenmikroskopische Untersuchungen zeigten, dass auch bei geringeren Epoxidharzzus{\"a}tzen St{\"o}rungen der Zementhydratation auftraten. Weiterhin zeigen sich bei geringen Epoxidharzzus{\"a}tzen in der Matrix kugelf{\"o}rmige Einschl{\"u}sse, die von dispergierten Epoxidharzpartikeln stammen.}, subject = {Bauchemie}, language = {de} } @phdthesis{MartinezSoto, author = {Martinez Soto, Aner}, title = {Analyse und Erweiterung von bestehenden Prognosemodellen zur Bestimmung des Endenergiebedarfs im Wohnungssektor}, doi = {10.25643/bauhaus-universitaet.3225}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170607-32251}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {291}, abstract = {Die wachsende Notwendigkeit zur Energieeinsparung hat in verschiedenen L{\"a}ndern zur Entwicklung von Prognosemodellen zur Bestimmung des Energiebedarfs im Wohnungssektor gef{\"u}hrt. Obwohl Prognosemodelle prinzipiell eine L{\"o}sung zur Bestimmung des Energiebedarfs und zur Beurteilung der Auswirkungen von zuk{\"u}nftigen Energieeinsparmaßnahmen darstellen, sind die bestehenden Modelle jedoch mit Unw{\"a}gbarkeiten in der Modellierung und M{\"a}ngeln bez{\"u}glich der verwendeten Daten und Methodik behaftet. In dieser Arbeit werden die {\"U}bertragbarkeit, Genauigkeit und stochastische Unsicherheit von zw{\"o}lf Prognosemodellen (MAED-2, FfE-Geb{\"a}udemodell, CDEM, REM, CREEM, ECCABS, REEPS, BREHOMES, LEAP, DECM, CHM, BSM) analysiert, wobei Deutschland als Fallbeispiel verwendet wird. Zur Verbesserung der {\"U}bertragbarkeit der bestehenden Modelle werden Anpassungen vorgeschlagen. Außerdem wird f{\"u}r jedes Modell eine Bestimmung der einflussreichsten Parameter auf den simulierten Endenergiebedarf mit Hilfe einer Sensitivit{\"a}tsanalyse vorgenommen. Es konnte gezeigt werden, dass Modelle mit einem hohen Detaillierungsgrad nicht zwangsl{\"a}ufig genauere Ergebnisse f{\"u}r den Endenergiebedarf garantieren. Dennoch wurde festgestellt, dass Modelle mit einem niedrigen Detaillierungsgrad Ergebnisse mit gr{\"o}ßeren Unsicherheiten liefern als Modelle mit einem h{\"o}heren Detaillierungsgrad. Es wurde weiterhin festgestellt, dass die einflussreichsten Parameter zur Bestimmung des Endenergiebedarfs im Wohnungssektor Innenraumtemperatur, Außentemperatur (Gradtagzahl), Bev{\"o}lkerungsentwicklung und Anzahl der Geb{\"a}ude/Wohnungen sind. Auf der Grundlage der Erkenntnisse zur Bewertung bestehender Modelle und der Bestimmung der einflussreichsten Parameter wurde ein optimiertes Prognosemodell (Transferable Residential Energy Model, TREM) entwickelt. Mit dessen Hilfe wurde die Entwicklung des Endenergiebedarfs im deutschen Wohnungssektor sowie in anderen L{\"a}ndern (Vereinigtes K{\"o}nigsreich und Chile) prognostiziert. Diese Ergebnisse wurden anschließend mit statistischen Daten verglichen. Das TREM-Modell bestimmt den Endenergiebedarf auf der Grundlage der wahrscheinlichsten Variationen der einflussreichsten Eingangsparameter mit Hilfe einer Monte-Carlo-Simulation. Im Gegensatz zu bestehenden Modellierungsans{\"a}tzen liefert das Modell damit auch einen Bereich mit Wahrscheinlichkeitsb{\"a}ndern f{\"u}r den zuk{\"u}nftigen Endenergiebedarf. Die Ergebnisse des TREM-Modells zeigen, dass das Modell genauere Ergebnisse liefern kann als derzeitige Modelle mit einem Mittelwert der prozentualen Differenz niedriger als 5\% und einem Korrelationskoeffizienten r h{\"o}her als 0,35 und dar{\"u}ber hinaus dazu geeignet ist, ohne Anpassungen eine Prognose der Entwicklung des zuk{\"u}nftigen Endenergiebedarfs im Wohnungssektor f{\"u}r unterschiedliche L{\"a}nder zu erstellen.}, subject = {Energieverbrauch}, language = {de} } @article{Metzner, author = {Metzner, Steffen}, title = {Regional Influences on Yields of Logistics Properties}, doi = {10.25643/bauhaus-universitaet.3181}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170516-31817}, pages = {1 -- 14}, abstract = {By allocating real estate investments into the logistics sector, investors highly participate in the economic development of the respective country or city. However, the submarket is very cyclical and special economic influences - such as growing online trade and new logistic networks - affect the performance of the properties. Important parameters on the potential returns are found not only within the real estate market, but also within the global economy and the development of specific industries. This paper aims at examining factors affecting the performance of logistics properties. Expected dependencies between macroeconomic factors and real estate economic indicators are examined for six major European logistics locations using econometric models, especially correlation and regression. Data series over a period of 25 years were used. The construction of an econometric model was an iterative process integrating both the statistical result and the economic causality.}, subject = {Grundst{\"u}ck}, language = {en} } @phdthesis{MeyerKohlstock, author = {Meyer-Kohlstock, Daniel}, title = {Prospects for Biochar in a Bio-Waste Cascade}, doi = {10.25643/bauhaus-universitaet.3631}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171108-36310}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {118}, abstract = {In the early 2000s the pre-Columbian, anthropologically produced black soil in the Amazon basin, „Terra Preta de {\´I}ndio", received greater scientific attention. Compared to the surrounding poor soils, this very fertile anthrosol contains significantly higher levels of microorganisms and nutrients. The reason for this was determined to be the likewise high levels of charred biomass. This stable carbon, now called biochar, has since been intensively examined as an option to improve soil and to store carbon. Although the creation of Terra Preta was most likely based on a purposeful utilization of organic residues from households and gardens, biochar plays no role in the current recycling of bio-waste. However, the implementation of biochar could lead to many improvements. Results from agricultural research suggest that not only the yield capacity of soils can be increased but also the process performance of composting and biogas plants. The latter is especially relevant since currently about 40\% of all collected bio-waste in Germany is recycled in an energy-material cascade consisting of anaerobic digestion and composting. The use of biochar in this cascade could then sequentially increase biogas yields, reduce greenhouse gas emissions, and improve compost quality. To realize the aforementioned advantages, the concept of biochar has to be integrated into the existing bio-waste cascade as practically as possible. This was done by the development of a theoretical scenario that allowed the analysis of energy and material flows to evaluate biochar's recycling performance. Furthermore, the legal and economic framework were examined to assess the feasibility of the extended cascade and to suggest possible adjustments to the frameworks.}, subject = {Kompost}, language = {en} } @phdthesis{Msekh, author = {Msekh, Mohammed Abdulrazzak}, title = {Phase Field Modeling for Fracture with Applications to Homogeneous and Heterogeneous Materials}, doi = {10.25643/bauhaus-universitaet.3229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170615-32291}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {190}, abstract = {The thesis presents an implementation including different applications of a variational-based approach for gradient type standard dissipative solids. Phase field model for brittle fracture is an application of the variational-based framework for gradient type solids. This model allows the prediction of different crack topologies and states. Of significant concern is the application of theoretical and numerical formulation of the phase field modeling into the commercial finite element software Abaqus in 2D and 3D. The fully coupled incremental variational formulation of phase field method is implemented by using the UEL and UMAT subroutines of Abaqus. The phase field method considerably reduces the implementation complexity of fracture problems as it removes the need for numerical tracking of discontinuities in the displacement field that are characteristic of discrete crack methods. This is accomplished by replacing the sharp discontinuities with a scalar damage phase field representing the diffuse crack topology wherein the amount of diffusion is controlled by a regularization parameter. The nonlinear coupled system consisting of the linear momentum equation and a diffusion type equation governing the phase field evolution is solved simultaneously via a Newton- Raphson approach. Post-processing of simulation results to be used as visualization module is performed via an additional UMAT subroutine implemented in the standard Abaqus viewer. In the same context, we propose a simple yet effective algorithm to initiate and propagate cracks in 2D geometries which is independent of both particular constitutive laws and specific element technology and dimension. It consists of a localization limiter in the form of the screened Poisson equation with, optionally, local mesh refinement. A staggered scheme for standard equilibrium and screened Cauchy equations is used. The remeshing part of the algorithm consists of a sequence of mesh subdivision and element erosion steps. Element subdivision is based on edge split operations using a given constitutive quantity (either damage or void fraction). Mesh smoothing makes use of edge contraction as function of a given constitutive quantity such as the principal stress or void fraction. To assess the robustness and accuracy of this algorithm, we use both quasi-brittle benchmarks and ductile tests. Furthermore, we introduce a computational approach regarding mechanical loading in microscale on an inelastically deforming composite material. The nanocomposites material of fully exfoliated clay/epoxy is shaped to predict macroscopic elastic and fracture related material parameters based on their fine-scale features. Two different configurations of polymer nanocomposites material (PNCs) have been studied. These configurations are fully bonded PNCs and PNCs with an interphase zone formation between the matrix and the clay reinforcement. The representative volume element of PNCs specimens with different clay weight contents, different aspect ratios, and different interphase zone thicknesses are generated by adopting Python scripting. Different constitutive models are employed for the matrix, the clay platelets, and the interphase zones. The brittle fracture behavior of the epoxy matrix and the interphase zones material are modeled using the phase field approach, whereas the stiff silicate clay platelets of the composite are designated as a linear elastic material. The comprehensive study investigates the elastic and fracture behavior of PNCs composites, in addition to predict Young's modulus, tensile strength, fracture toughness, surface energy dissipation, and cracks surface area in the composite for different material parameters, geometry, and interphase zones properties and thicknesses.}, subject = {Finite-Elemente-Methode}, language = {en} } @phdthesis{Nariman, author = {Nariman, Nazim}, title = {Numerical Methods for the Multi-Physical Analysis of Long Span Cable-Stayed Bridges}, doi = {10.25643/bauhaus-universitaet.3710}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171122-37105}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {236}, abstract = {The main categories of wind effects on long span bridge decks are buffeting, flutter, vortex-induced vibrations (VIV) which are often critical for the safety and serviceability of the structure. With the rapid increase of bridge spans, research on controlling wind-induced vibrations of long span bridges has been a problem of great concern.The developments of vibration control theories have led to the wide use of tuned mass dampers (TMDs) which has been proven to be effective for suppressing these vibrations both analytically and experimentally. Fire incidents are also of special interest in the stability and safety of long span bridges due to significant role of the complex phenomenon through triple interaction between the deck with the incoming wind flow and the thermal boundary of the surrounding air. This work begins with analyzing the buffeting response and flutter instability of three dimensional computational structural dynamics (CSD) models of a cable stayed bridge due to strong wind excitations using ABAQUS finite element commercial software. Optimization and global sensitivity analysis are utilized to target the vertical and torsional vibrations of the segmental deck through considering three aerodynamic parameters (wind attack angle, deck streamlined length and viscous damping of the stay cables). The numerical simulations results in conjunction with the frequency analysis results emphasized the existence of these vibrations and further theoretical studies are possible with a high level of accuracy. Model validation is performed by comparing the results of lift and moment coefficients between the created CSD models and two benchmarks from the literature (flat plate theory) and flat plate by (Xavier and co-authors) which resulted in very good agreements between them. Optimum values of the parameters have been identified. Global sensitivity analysis based on Monte Carlo sampling method was utilized to formulate the surrogate models and calculate the sensitivity indices. The rational effect and the role of each parameter on the aerodynamic stability of the structure were calculated and efficient insight has been constructed for the stability of the long span bridge. 2D computational fluid dynamics (CFD) models of the decks are created with the support of MATLAB codes to simulate and analyze the vortex shedding and VIV of the deck. Three aerodynamic parameters (wind speed, deck streamlined length and dynamic viscosity of the air) are dedicated to study their effects on the kinetic energy of the system and the vortices shapes and patterns. Two benchmarks from the literature (Von Karman) and (Dyrbye and Hansen) are used to validate the numerical simulations of the vortex shedding for the CFD models. A good consent between the results was detected. Latin hypercube experimental method is dedicated to generate the surrogate models for the kinetic energy of the system and the generated lift forces. Variance based sensitivity analysis is utilized to calculate the main sensitivity indices and the interaction orders for each parameter. The kinetic energy approach performed very well in revealing the rational effect and the role of each parameter in the generation of vortex shedding and predicting the early VIV and the critical wind speed. Both one-way fluid-structure interaction (one-way FSI) simulations and two-way fluid-structure interaction (two-way FSI) co-simulations for the 2D models of the deck are executed to calculate the shedding frequencies for the associated wind speeds in the lock-in region in addition to the lift and drag coefficients. Validation is executed with the results of (Simiu and Scanlan) and the results of flat plate theory compiled by (Munson and co-authors) respectively. High levels of agreements between all the results were detected. A decrease in the critical wind speed and the shedding frequencies considering (two-way FSI) was identified compared to those obtained in the (one-way FSI). The results from the (two-way FSI) approach predicted appreciable decrease in the lift and drag forces as well as prediction of earlier VIV for lower critical wind speeds and lock-in regions which exist at lower natural frequencies of the system. These conclusions help the designers to efficiently plan and consider for the design and safety of the long span bridge before and after construction. Multiple tuned mass dampers (MTMDs) system has been applied in the three dimensional CSD models of the cable stayed bridge to analyze their control efficiency in suppressing both wind -induced vertical and torsional vibrations of the deck by optimizing three design parameters (mass ratio, frequency ratio and damping ratio) for the (TMDs) supporting on actual field data and minimax optimization technique in addition to MATLAB codes and Fast Fourier Transform technique. The optimum values of each parameter were identified and validated with two benchmarks from the literature, first with (Wang and co-authors) and then with (Lin and co-authors). The validation procedure detected a good agreement between the results. Box-Behnken experimental method is dedicated to formulate the surrogate models to represent the control efficiency of the vertical and torsional vibrations. Sobol's sensitivity indices are calculated for the design parameters in addition to their interaction orders. The optimization results revealed better performance of the MTMDs in controlling both the vertical and the torsional vibrations for higher mode shapes. Furthermore, the calculated rational effect of each design parameter facilitates to increase the control efficiency of the MTMDs in conjunction with the support of the surrogate models which simplifies the process of analysis for vibration control to a great extent. A novel structural modification approach has been adopted to eliminate the early coupling between the bending and torsional mode shapes of the cable stayed bridge. Two lateral steel beams are added to the middle span of the structure. Frequency analysis is dedicated to obtain the natural frequencies of the first eight mode shapes of vibrations before and after the structural modification. Numerical simulations of wind excitations are conducted for the 3D model of the cable stayed bridge. Both vertical and torsional displacements are calculated at the mid span of the deck to analyze the bending and the torsional stiffness of the system before and after the structural modification. The results of the frequency analysis after applying lateral steel beams declared that the coupling between the vertical and torsional mode shapes of vibrations has been removed to larger natural frequencies magnitudes and higher rare critical wind speeds with a high factor of safety. Finally, thermal fluid-structure interaction (TFSI) and coupled thermal-stress analysis are utilized to identify the effects of transient and steady state heat-transfer on the VIV and fatigue of the deck due to fire incidents. Numerical simulations of TFSI models of the deck are dedicated to calculate the lift and drag forces in addition to determining the lock-in regions once using FSI models and another using TFSI models. Vorticity and thermal fields of three fire scenarios are simulated and analyzed. The benchmark of (Simiu and Scanlan) is used to validate the TFSI models, where a good agreement was manifested between the two results. Extended finite element method (XFEM) is adopted to create 3D models of the cable stayed bridge to simulate the fatigue of the deck considering three fire scenarios. The benchmark of (Choi and Shin) is used to validate the damaged models of the deck in which a good coincide was seen between them. The results revealed that the TFSI models and the coupled thermal-stress models are significant in detecting earlier vortex induced vibration and lock-in regions in addition to predicting damages and fatigue of the deck and identifying the role of wind-induced vibrations in speeding up the damage generation and the collapse of the structure in critical situations.}, subject = {Stabilit{\"a}t}, language = {en} } @article{NguyenTuanKoenkeBettziecheetal., author = {Nguyen-Tuan, Long and K{\"o}nke, Carsten and Bettzieche, Volker and Lahmer, Tom}, title = {Numerical modeling and validation for 3D coupled-nonlinear thermo-hydro-mechanical problems in masonry dams}, series = {Computers \& Structures}, journal = {Computers \& Structures}, pages = {143 -- 154}, abstract = {Numerical modeling and validation for 3D coupled-nonlinear thermo-hydro-mechanical problems in masonry dams}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Oroz, author = {Oroz, Gonzalo}, title = {Die Wege der Ungleichheit. Eine Studie {\"u}ber die Beziehung zwischen sozial-r{\"a}umlicher Segregation und Verkehrsinfrastruktur. Der Fall Santiago de Chile}, doi = {10.25643/bauhaus-universitaet.2924}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170412-29244}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {353}, abstract = {Die Arbeit besch{\"a}ftigt sich mit den Auswirkungen des Baus von neuen Stadtautobahnen in Santiago de Chile. Ziel der Studie ist, die Ver{\"a}nderungen im Segregationsmuster der Hauptstadt Chiles, die durch den Bau dieser Autobahnen entstanden sind, zu beschreiben. Die Arbeit betrachtet die Entstehung von Segregationsmustern als kulturell-historisches Ph{\"a}nomen urbaner Bedeutung, weswegen die Entwicklung der Stadt Santiago und deren Segregationsmuster nicht nur aus der Perspektive der Stadtsoziologie und der Stadtgeographie, sondern auch aus einer historischen Perspektive analysiert wird. Dabei liegt der Schwerpunkt der Arbeit auf der Wechselbeziehung zwischen Verkehrsinfrastruktur und sozial-r{\"a}umlicher Verteilung der verschiedenen sozialen Gruppen. Die Entstehung der neuen Stadtautobahnen in Santiago de Chile l{\"a}sst sich nur durch eine mehrdimensionale Betrachtung erkl{\"a}ren. Diese Bauten und die besondere Art in der sie gebaut und betrieben werden, konnten nur durch die Einf{\"u}hrung von Konzessionsmechanismen innerhalb einer neoliberalen Markwirtschaft entstehen. In diesem sozial-{\"o}konomischer Rahmen, bei dem die B{\"u}rger lediglich als potenzielle Kunden betrachtet werden, sind die Infrastrukturbauten - darunter auch die Stadtautobahnen - maßgeschneiderte Produkte f{\"u}r eine Minderheit. Dieses Konzept hat gravierende Folgen f{\"u}r das Sozialgef{\"u}ge der Stadt Santiago. Die Folgen der Einf{\"u}hrung der Stadtautobahnen auf das Segregationsmuster und das Sozialgef{\"u}ge der Hauptstadt Chiles werden anhand zweier Fallstudien veranschaulicht. Mittels einer mehrschichtigen qualitativen Methodik werden die Auswirkungen des Baus von Stadtautobahnen im Armenviertel »Santo Tom{\´a}s« des s{\"u}dlichen Stadtbezirk »La Pintana« und im elit{\"a}ren »Condominio La Reserva« im n{\"o}rdlichen Ausdehnungsgebiet »Chacabuco« analysiert. Anschließend wird ein neues Beschreibungsmodell f{\"u}r die lateinamerikanische Stadt vorgeschlagen; das »symbiotische Stadtmodell« st{\"u}tzt sich zum gr{\"o}ßten Teil auf den Ausbau des Autobahnnetzes.}, subject = {Segregation}, language = {de} } @article{PervyshinYakovlevGordinaetal., author = {Pervyshin, G.N. and Yakovlev, G.I. and Gordina, A.F. and Keriene, J. and Polyanskikh, I.S. and Fischer, Hans-Bertram and Rachimova, N.R. and Buryanov, A.F.}, title = {Water-resistant Gypsum Compositions with Man-made Modifiers}, series = {Procedia Engineering}, journal = {Procedia Engineering}, doi = {10.1016/j.proeng.2017.02.087}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31580}, pages = {867 -- 874}, abstract = {The work has studied the structure and properties of gypsum compositions modified with the manmade modifier based on metallurgical dust and multi-walled carbon nanotubes. The results show that changing the structure of solid gypsum leads to the increase in bending and compressive strength by 70,5\% and 138\% correspondingly, the water resistance increasing and the softening factor reaching 0,85. Modifying gypsum composition with complex additive leads to the formation of amorphous structures based on calcium hydrosilicates on the surface of primary gypsum crystallohydrates that bond gypsum crystals and reduce the access of water.}, subject = {Gips}, language = {en} } @phdthesis{Peters, author = {Peters, Simone}, title = {The Influence of Power Ultrasound on Setting and Strength Development of Cement Suspensions}, isbn = {ISBN 978-3-00-055602-9}, doi = {10.25643/bauhaus-universitaet.2744}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170210-27446}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {146}, abstract = {Ein aktuelles Thema in der Forschung der Betonindustrie ist die gezielte Steuerung des Erstarrens und der Entwicklung der (Fr{\"u}h)Festigkeit von Betonen und M{\"o}rteln. Aus {\"o}konomischer Sicht sind außerdem die Reduktion der CO2-Emission und die Schonung von Ressourcen und Energie wichtige Forschungsschwerpunkte. Eine M{\"o}glichkeit zum Erreichen dieser Ziele ist es, die Reaktivit{\"a}t/Hydratation der silikatischen Klinkerphasen gezielt anzuregen. Neben den bereits bekannten M{\"o}glichkeiten der Hydratationsbeschleunigung (u.a. W{\"a}rmebehandlung, Zugabe von Salzen) bietet die Anwendung von Power-Ultraschall (PUS) eine weitere Alternative zur Beschleunigung der Zementhydratation. Da bis zum jetzigen Zeitpunkt noch keine Erfahrungen zum Einsatz von PUS in der Zementchemie vorliegen, sollen mit der vorliegenden Arbeit grundlegende Kenntnisse zum Einfluss von PUS auf das Fließ- und Erstarrungsverhalten von Zementsuspensionen erarbeitet werden. Dazu wurde die Arbeit in f{\"u}nf Hauptuntersuchungsabschnitte aufgeteilt. Im ersten Teil wurden optimale PUS-Parameter wie Amplitude und Energieeintrag ermittelt, die eine effiziente Beschleunigung der Portlandzement(CEM I)hydratation bei kurzen Beschallzeiten und begrenzter Zementleimtemperaturerh{\"o}hung erlauben. Mit Hilfe unabh{\"a}ngiger Untersuchungsmethoden (Bestimmung des Erstarrungsbeginns, der Festigkeitsentwicklung, zerst{\"o}rungsfreier Ultraschallpr{\"u}fung, isothermer W{\"a}rmeflusskalorimetrie, hochaufl{\"o}sender Rasterelektronmikroskopie (REM) wurde die Wirkung von PUS auf den Hydratationsverlauf von CEM I-Suspensionen charakterisiert. Die Ergebnisse zeigen, dass die Behandlung von CEM I-Suspensionen mit PUS grunds{\"a}tzlich ein beschleunigtes Erstarren und eine beschleunigte (Fr{\"u}h)Festigkeitsentwicklung hervorruft. Anhand von REM-Untersuchungen konnte eindeutig nachgewiesen werden, dass die Beschleunigung der CEM I-Hydratation mit einer beschleunigten Hydratation der Hauptklinkerphase Alit korreliert. Auf Grundlage dieser Erkenntnisse wurden die Ursachen der Aktivierung der Alithydratation untersucht. Dazu wurden Untersuchungen an Einzelsystemen des CEM I (silikatische Klinkerphase) durchgef{\"u}hrt. Es ist bekannt, das die Hydratation der Hauptklinkerphase Alit (in der reinen Form Tricalciumsilikat 3CaO*SiO2; C3S) durch L{\"o}sungs-/F{\"a}llungsreaktionen (Bildung von Calcium-Silikat-Hydrat Phasen, C-S-H Phasen) bestimmt wird. Mit Hilfe von Untersuchungen zur Aufl{\"o}sung (C3S) und Kristallbildung (C-S-H Phasen) in L{\"o}sungen und Suspensionen (Aufzeichnung der elektrischen Leitf{\"a}higkeit sowie Bestimmung der Ionenkonzentrationen der w{\"a}ssrigen Phase, REM-Charakterisierung der Pr{\"a}zipitate) wurde die Beeinflussung dieser durch eine PUS-Behandlung charakterisiert. Die Ergebnisse zeigen, dass in partikelfreien L{\"o}sungen (prim{\"a}re Keimbildung) eine PUS-Behandlung keinen Einfluss auf die Kinetik der Kristallisation von C-S-H Phasen hervorruft. Das heißt, auch die durch PUS eingetragene Energie reicht offensichtlich nicht aus, um in Abwesenheit von Oberfl{\"a}chen die C-S-H Phasen Bildung zu beschleunigen. Das weist darauf hin, dass die Bildung von C-S-H Phasen nicht durch eine Beschleunigung von Ionen in der L{\"o}sung (erh{\"o}hte Diffusion durch Anwendung von PUS) hervorgerufen wird. Eine Beschleunigung des Kristallisationsprozesses (Keimbildung und Wachstum von C-S-H Phasen) durch PUS wird nur in Anwesenheit von Partikeln in der L{\"o}sung (Suspension) erzielt. Das belegen Ergebnisse, bei denen die Bildung erster C-S-H Phasen bei geringer {\"U}bers{\"a}ttigung (heterogene Keimbildung, in Anwesenheit von Oberfl{\"a}chen) erfolgt. Unter diesen Bedingungen konnte gezeigt werden, dass PUS innerhalb der ersten 30 Minuten der Hydratation eine erh{\"o}hte F{\"a}llung von ersten C-S-H Phasen bewirkt. Diese fungieren dann vermutlich w{\"a}hrend der Haupthydratation als Keim bzw. geeignete Oberfl{\"a}che zum beschleunigten Aufwachsen von weiteren C-S-H Phasen. Weiterhin ist vorstellbar, dass (in Analogie zu anderen Bereichen der Sonochemie) PUS durch Kavitation Schockwellen hervorruft, welche Partikel und w{\"a}ssriges Medium beschleunigen und damit erh{\"o}hte Partikelbewegungen und -kollisionen induziert. Dies wiederum bewirkt, dass die anf{\"a}nglich auf der C3S-Oberfl{\"a}che gebildeten C-S-H Phasen teilweise wieder entfernt werden. Damit ist das Inl{\"o}sunggehen von Ca- und Si-Ionen aus dem C3S weiterhin m{\"o}glich. Um den genauen Mechanismus weiter zu charakterisieren sollten mit geeigneten Methoden weitere Untersuchungen durchgef{\"u}hrt werden. Im zweiten Teil der Arbeit wurde der Einfluss von PUS auf das Fließverhalten von CEM I-Suspensionen untersucht. Aus der Anwendung von PUS in anderen technischen Bereichen sind unter anderem Effekte wie das Entl{\"u}ften, das Homogenisieren und das Dispergieren von Suspensionen und Emulsionen mittels PUS bekannt. Mit Hilfe der Bestimmung des Luftporengehaltes, Sedimentationsversuchen und cryo-SEM Untersuchungen wurde der Einfluss von PUS auf CEM I-Suspensionen charakterisiert. Die Ergebnisse belegen, dass durch PUS eine verbesserte Homogenit{\"a}t und Dispergierung der CEM I-Suspension erzielt wird. Damit wird f{\"u}r CEM I-Suspensionen unterschiedlichster w/z-Werte eine verbesserte Fließf{\"a}higkeit festgestellt. Ergebnisse der Bestimmung von Ausbreitmaßen und Trichterauslaufzeiten zeigen, dass PUS einen direkten Einfluss vor allem auf die Viskosit{\"a}t der CEM I-Suspensionen besitzt. Werden Fließmitteln (FM) der CEM I-Suspension zugegeben, wird nicht in jedem Fall eine verbesserte Fließf{\"a}higkeit festgestellt. Hier scheint unter bestimmten Voraussetzungen (w/z-Wert, FM-Gehalt, PUS) die Reaktion zwischen Aluminat- und Sulfatphase des Klinkers gest{\"o}rt. Zur eindeutigen Kl{\"a}rung dieses Sachverhaltes bedarf es jedoch weiterer quantitativer Untersuchungen zum Reaktionsumsatz. Im dritten Teil der Arbeit wurden die am CEM I gewonnenen Erkenntnisse zum Einfluss von PUS auf die Hydratation an Portland-H{\"u}ttensand(H{\"U}S)-Zement-Systemen verifiziert. Daf{\"u}r wurden auch in diesem Teil der Arbeit zun{\"a}chst die optimalen PUS-Parameter festgelegt und der Einfluss auf das Erstarrung- und Erh{\"a}rtungsverhalten dokumentiert. Untersuchungsmethoden sind unter anderem die Bestimmung des Erstarrungsbeginns und der (Fr{\"u}h)Festigkeitsentwicklung, Temperaturaufzeichnungen und isothermale W{\"a}rmeflusskalorimetrie sowie REM. Die Ergebnisse zeigen, dass auch die Reaktion von H{\"U}S-Zementen durch PUS beschleunigt wird. Weiterf{\"u}hrende Untersuchungen belegen, dass die erzielte Beschleunigung vorwiegend auf der Beschleunigung der Alitkomponente des CEM I beruht. Im Fokus der Teile vier und f{\"u}nf dieser Arbeit stand die Anwendbarkeit der PUS-Technik unter praktischen Bedingungen. Zum einen wurde die Anwendbarkeit von PUS in fertig gemischten M{\"o}rteln beurteilt. Anhand des Vergleichs wichtiger Frisch- und Festm{\"o}rteleigenschaften unterschiedlich hergestellter M{\"o}rtel (beschallt im Anschluss an konventionelle Mischtechnik, beschallt im Anschluss an Suspensionsmischtechnik mit anschließender Zumischung der Gesteinsk{\"o}rnung und nicht beschallt) wird gezeigt, dass im Fall von M{\"o}rteln mit hohem Leimanteil eine durch PUS induzierte beschleunigte Festigkeitsentwicklung auch mit herk{\"o}mmlichen Mischabl{\"a}ufen (ohne aufwendige Umstellung des Mischprozesses) m{\"o}glich ist. Abschließend wird untersucht, ob der Herstellungsprozess von Wandbauteilen im Fertigteilwerk durch den Einsatz von PUS optimiert werden kann und ob eine Einbindung der PUS-Technik in den Fertigungsprozess ohne gr{\"o}ßeren Aufwand m{\"o}glich ist. Dazu wurden in einem ersten Schritt die Frisch- und Festbetoneigenschaften eines aktuell angewendeten selbstverdichtenden Betons im Labormaßstab (M{\"o}rtel) in Abh{\"a}ngigkeit einer PUS-Behandlung dokumentiert und mit der seiner unbeschallten Referenz verglichen. Aufgrund der durch PUS verursachten verbesserten Fließ- und Festigkeitseigenschaften kann die beschallte M{\"o}rtelrezeptur hinsichtlich Fließmittelgehalt und Dauer der W{\"a}rmebehandlung optimiert werden. Somit werden ca. 30 \% der Fließmittelzugabe und 40 \% der Dauer der W{\"a}rmebehandlung eigespart. Eine Einbindung der PUS-Technik in das betrachtete Fertigteilwerk ist nach {\"U}berpr{\"u}fung der konstruktiven Gegebenheiten der Fertigungsstrukturen ohne gr{\"o}ßeren Aufwand m{\"o}glich.}, subject = {Cement}, language = {en} } @phdthesis{Podlaszewska, author = {Podlaszewska, Rizky Suci Ammalia}, title = {The Placemaking of Destination. Localization and Commoditization process of Urban Tourism. Study case Palembang Indonesia}, doi = {10.25643/bauhaus-universitaet.3699}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171201-36995}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This research addresses the discourse of tourism as a tool for place-making of urban destination. Relevant to the study of place-making is the analysis of the commoditization and localization process dependent upon the appropriation of urban landscape and local cultures. In the research, localization is interpreted as the act of determining the attributes of locality, while commoditization is defined as the process by which local attributes that have commercial potential end up in becoming tourism commodity. Following this, the commoditization of intrinsic cultural value is disseminated within a branding strategy and intervention reflecting social and political relations. Therefore, the research suggests that tourism place-making has not only been constructed through the top-down regulatory body, but has been also generated through the attributes of its locality. By utilizing the critical and constructivist paradigm, the research depicts the conditions of the localization and commoditization process in establishing the base line of its realization within the symbolic economy. Thus, a qualitative case study approach was adopted. The study area of this dissertation is Palembang, as one of the capital cities in Indonesia advancing in its overall urban development. To investigate urban tourism as a tool for development strategy, it is useful to investigate the role of tourism which embodies (1) spatial transformation; how tourism gives significant impacts on urban form, and (2) the socio-cultural aspect; how neighbourhood is related to tourism industry. The findings suggest that tourism place-making involves the reciprocity of urban dynamics: cities take on tourism as a reference model of development, and tourist areas adopt the proliferation of cultural lifestyle to meet the industry's demands.}, subject = {Urbanistik}, language = {en} } @phdthesis{Romallosa, author = {Romallosa, Aries Roda D.}, title = {Briquette Production By The Informal Sector: The Case of UCLA in Iloilo City, Philippines}, doi = {10.25643/bauhaus-universitaet.3233}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170620-32335}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {156}, abstract = {The construction and operation of a sanitary landfill (SLF) in the Philippines presents concerns on the regulation of the activities of the informal sector in the area. In anticipation of these directives, an association of informal waste reclaimers group called Uswag Calajunan Livelihood Association, Inc. (UCLA) was formed in May 2009. One option identified was the waste-to-energy activity through the production of fuel briquettes. With the availability of raw materials in the area, what was lacking then was an appropriate technology that would cater to their needs. This study, therefore, presented the case of UCLA on how socio-economic and technical aspects was integrated for the development and improvement of a briquetting technology needed in the production of quality briquettes as part of their income generating activities. A non-experimental posttest only design was utilized for the collection of descriptive information. Descriptions and discussions were also made on the enhancement of the briquetting machine from the first hand-press molder developed until the finalized design was attained. Results revealed that the improved briquetting technology withstood the wear and tear of operation showing a significant (P<0.01) increase on the production rate (220 pcs/hr; 4 kg/hr) and bulk density (444.83 kg/m3) of briquettes produced. The quality of cylindrical briquettes produced in terms of bulk density, heating value (15.13 MJ/kg), moisture (6.2\%), N and S closely met or has met the requirements of DIN 51731. Based on the operating expenses, the briquettes may be marked-up to Php0.25/pc (USD0.006) or Php15.00/kg (USD0.34) for profit generation. The potential daily earnings of Php130.00 (USD2.95) to Php288.56 (USD6.56) generated in producing briquettes are higher when compared to the majority of waste reclaimers' daily income of Php124.00 (USD2.82). The high positive response (93\%) on the usability of briquettes and the willingness of the respondents (81\%) to buy them when sold in the market indicates its promising potential as fuel in the nearby communities. Results of briquette production citing the case of UCLA could be considered as potential source of income given the social, technical, economic and environmental feasibility of the experiment. This method of utilizing wastes in an urban setting of a developing country with similar socio-economic and physical set-ups may also be recommended for testing or replication.}, subject = {Biotechnologie}, language = {en} } @article{SchuchKaps, author = {Schuch, Kai and Kaps, Christian}, title = {Reifungs- und Strukturbildungsprozesse bei Bindern mit w{\"a}ssrigen Alkalisilikat-L{\"o}sungen}, doi = {10.25643/bauhaus-universitaet.3268}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170728-32682}, pages = {1 -- 17}, abstract = {Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder.}, subject = {Alkalisilikat}, language = {de} } @article{SchuchKaps, author = {Schuch, Kai and Kaps, Christian}, title = {Reifungs- und Strukturbildungsprozesse bei Bindern mit w{\"a}ssrigen Alkalisilikat-L{\"o}sungen}, doi = {10.25643/bauhaus-universitaet.3267}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170718-32675}, pages = {1 -- 17}, abstract = {Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder}, subject = {Alkalisilikat}, language = {de} } @article{SchuchKaps, author = {Schuch, Kai and Kaps, Christian}, title = {Maturation and Structure Formation Processes in Binders with Aqueous Alkali-Silicate Solutions}, doi = {10.25643/bauhaus-universitaet.3597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170907-35979}, pages = {1 -- 16}, abstract = {Maturation and structure formation processes can lead to crack formation in silicate and aluminosilicate binders (e.g. for coating materials...) through restricted deformation, loss of strength and thus to loss of durability. These processes are evaluated with silicate materials with an outlook on aluminosilicate binders.}, subject = {Waterglass}, language = {en} } @phdthesis{Schwedler, author = {Schwedler, Michael}, title = {Integrated structural analysis using isogeometric finite element methods}, doi = {10.25643/bauhaus-universitaet.2737}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170130-27372}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {209}, abstract = {The gradual digitization in the architecture, engineering, and construction industry over the past fifty years led to an extremely heterogeneous software environment, which today is embodied by the multitude of different digital tools and proprietary data formats used by the many specialists contributing to the design process in a construction project. Though these projects become increasingly complex, the demands on financial efficiency and the completion within a tight schedule grow at the same time. The digital collaboration of project partners has been identified as one key issue in successfully dealing with these challenges. Yet currently, the numerous software applications and their respective individual views on the design process severely impede that collaboration. An approach to establish a unified basis for the digital collaboration, regardless of the existing software heterogeneity, is a comprehensive digital building model contributed to by all projects partners. This type of data management known as building information modeling (BIM) has many benefits, yet its adoption is associated with many difficulties and thus, proceeds only slowly. One aspect in the field of conflicting requirements on such a digital model is the cooperation of architects and structural engineers. Traditionally, these two disciplines use different abstractions of reality for their models that in consequence lead to incompatible digital representations thereof. The onset of isogeometric analysis (IGA) promised to ease the discrepancy in design and analysis model representations. Yet, that initial focus quickly shifted towards using these methods as a more powerful basis for numerical simulations. Furthermore, the isogeometric representation alone is not capable of solving the model abstraction problem. It is thus the intention of this work to contribute to an improved digital collaboration of architects and engineers by exploring an integrated analysis approach on the basis of an unified digital model and solid geometry expressed by splines. In the course of this work, an analysis framework is developed that utilizes such models to automatically conduct numerical simulations commonly required in construction projects. In essence, this allows to retrieve structural analysis results from BIM models in a fast and simple manner, thereby facilitating rapid design iterations and profound design feedback. The BIM implementation Industry Foundation Classes (IFC) is reviewed with regard to its capabilities of representing the unified model. The current IFC schema strongly supports the use of redundant model data, a major pitfall in digital collaboration. Additionally, it does not allow to describe the geometry by volumetric splines. As the pursued approach builds upon a unique model for both, architectural and structural design, and furthermore requires solid geometry, necessary schema modifications are suggested. Structural entities are modeled by volumetric NURBS patches, each of which constitutes an individual subdomain that, with regard to the analysis, is incompatible with the remaining full model. The resulting consequences for numerical simulation are elaborated in this work. The individual subdomains have to be weakly coupled, for which the mortar method is used. Different approaches to discretize the interface traction fields are implemented and their respective impact on the analysis results is evaluated. All necessary coupling conditions are automatically derived from the related geometry model. The weak coupling procedure leads to a linear system of equations in saddle point form, which, owed to the volumetric modeling, is large in size and, the associated coefficient matrix has, due to the use of higher degree basis functions, a high bandwidth. The peculiarities of the system require adapted solution methods that generally cause higher numerical costs than the standard procedures for symmetric, positive-definite systems do. Different methods to solve the specific system are investigated and an efficient parallel algorithm is finally proposed. When the structural analysis model is derived from the unified model in the BIM data, it does in general initially not meet the requirements on the discretization that are necessary to obtain sufficiently accurate analysis results. The consequently necessary patch refinements must be controlled automatically to allowfor an entirely automatic analysis procedure. For that purpose, an empirical refinement scheme based on the geometrical and possibly mechanical properties of the specific entities is proposed. The level of refinement may be selectively manipulated by the structural engineer in charge. Furthermore, a Zienkiewicz-Zhu type error estimator is adapted for the use with isogeometric analysis results. It is shown that also this estimator can be used to steer an adaptive refinement procedure.}, subject = {Finite-Elemente-Methode}, language = {en} } @inproceedings{Schuetz, author = {Sch{\"u}tz, Stephan}, title = {Folded Cardboard Sandwiches for Load-bearing Architectural Components}, series = {WSBE17 Hong Kong - Conference Proceedings}, booktitle = {WSBE17 Hong Kong - Conference Proceedings}, publisher = {Construction Industry Council, Hong Kong Green Building Council Limited}, address = {Hong Kong}, isbn = {978-988-77943-0-1}, doi = {10.25643/bauhaus-universitaet.3805}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181029-38052}, pages = {8}, abstract = {The high resource demand of the building sector clearly indicates the need to search for alternative, renewable and energy-efficient materials. This work presents paper-laminated sandwich elements with a core of corrugated paperboard that can serve as architectural components with a load-bearing capacity after a linear folding process. Conventional methods either use paper tubes or glued layers of honeycomb panels. In contrast, the folded components are extremely lightweight, provide the material strength exactly where it is statically required and offer many possibilities for design variants. After removing stripes of the paper lamination, the sandwich can be folded in a linear way at this position. Without the resistance of the missing paper, the sandwich core can be easily compressed. The final angle of the folding correlates with the width of the removed paper stripe. As such, this angle can be described by a simple geometric equation. The geometrical basis for the production of folded sandwich elements was established and many profile types were generated such as triangular, square or rectangular shapes. The method allows the easy planning and fast production of components that can be used in the construction sector. A triangle profile was used to create a load-bearing frame as supporting structure for an experimental building. This first permanent building completely made of corrugated cardboard was evaluated in a two-year test to confirm the efficiency of the developed components. In addition to the frame shown in this paper, large-scale sandwich elements with a core of folded components can be used to fabricate lightweight ceilings and large-scale sandwich components. The method enables the efficient production of linearly folded cardboard elements which can replace normal wooden components like beams, pillars or frames and bring a fully recycled material in the context of architectural construction.}, subject = {Tragendes Teil}, language = {en} } @unpublished{SimonRitzRudolf, author = {Simon-Ritz, Frank and Rudolf, Sylvelin}, title = {Ein Schaufenster f{\"u}r die Kunst}, volume = {69}, number = {Heft 6}, doi = {10.25643/bauhaus-universitaet.3230}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170711-32307}, pages = {312 -- 317}, abstract = {Kunstausstellungen in Bibliotheken}, subject = {Ausstellung}, language = {de} } @techreport{SmarslyWiggenbrock, type = {Working Paper}, author = {Smarsly, Kay and Wiggenbrock, Jens}, title = {Automatisierte Planung von digitalen Hochgeschwindigkeitsnetzen}, doi = {10.25643/bauhaus-universitaet.3309}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170828-33095}, pages = {5}, abstract = {Der Ausbau von digitalen Hochgeschwindigkeitsnetzen ist gekennzeichnet durch neuartige Anforderungen an den Planungsprozess. Diese Anforderungen erfordern wiederum den Einsatz von neuartigen Paradigmen, die eine effiziente und zugleich genaue Planung von fl{\"a}chendeckenden Glasfasernetzen erm{\"o}glichen. Hierbei k{\"o}nnen wiederkehrende Planungsaufgaben durch eine gezielte computergest{\"u}tzte Automatisierung effizienter und genauer ausgef{\"u}hrt, als es mit bisherigen Planungskonzepten m{\"o}glich ist. Dieses Arbeitspapier beschreibt die computergest{\"u}tzte Ausf{\"u}hrung eines Planungsprozesses auf Basis von f{\"u}nf grundlegenden, iterativen Planungsschritten und gibt Empfehlungen f{\"u}r eine effiziente und genaue Planung von Glasfasernetzen. Der hier vorgestellte Ansatz erm{\"o}glicht es Netzbetreibern und Investoren, den Ausbau beliebiger Siedlungs- und Gewerbegebiete auf der zuverl{\"a}ssigen Basis von belastbarem Faktenwissen wirtschaftlich zu priorisieren.}, subject = {Kostenoptimierung}, language = {de} } @phdthesis{Smirnova, author = {Smirnova, Elena}, title = {"Kennst du das Land, wo bl{\"u}ht Oranienbaum?" - A Case Study on Strategic and Territorial Planning in St. Petersburg (Russia)}, doi = {10.25643/bauhaus-universitaet.3255}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170711-32556}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The research examines the system of strategic and territorial planning of St. Petersburg focusing on Lomonosov (Oranienbaum) as its case study. The study provides the analysis of the planning documentation developed for the city in the post-Soviet period. In particular, it elaborates on the currently enforced Strategy of Economic and Social Development of St. Petersburg-2030 (2014) and the City General Plan (2005), discussing the aspects of their development and implementation, as well as complex interrelation. Thereby, peculiarities of the spatial development of the St. Petersburg agglomeration are also investigated, elaborating on the state policy on agglomerations, historic development of St. Petersburg and relations with the Leningrad Region, governance and imbalances of the St. Petersburg spatial development, including proposed development scenarios. Consequently, the study employs a highly indicative case of the Lomonosov town municipal unit aiming to illustrate the practical implementation of administrative, territorial and strategic policies in a given context within a system of the state planning adopted in St. Petersburg, in particular, taking into consideration recently proclaimed necessity for the transition to a polycentric city model following an innovative scenario for the socioeconomic and spatial development. In particular, Lomonosov (Oranienbaum) is explored egarding its current socio-economic situation and development scenarios: industrial site and cultural tourism. The Oranienbaum museum and nature-reserve is also thoroughly assessed with regard to its cultural tourism potential. Finally, the urban environment of Lomonosov (Oranienbaum) is comprehensively scrutinized in terms of its historic development, residential housing typology, UNESCO World Heritage preservation and local urban heritage. In conclusion, the data on Lomonosov present in the St. Petersburg strategic and territorial planning documents is provided.}, subject = {Lomonossow}, language = {en} } @article{Speitkamp, author = {Speitkamp, Winfried}, title = {Identit{\"a}t durch Erbe? Historische Jubil{\"a}en und Jahrestage in der Erinnerungskultur}, doi = {10.25643/bauhaus-universitaet.3646}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171130-36467}, abstract = {Vortrag, gehalten am 13.12.2016 im Rahmen der Ringvorlesung des Graduiertenkollegs "Identit{\"a}t und Erbe" an der Bauhaus-Universit{\"a}t Weimar}, subject = {Kulturerbe}, language = {de} } @phdthesis{Staeudel, author = {St{\"a}udel, J{\"u}rgen}, title = {Development, Implementation and Operation of Integrated Sanitation Systems Based on Material-Flows - Integrated Sanitation in the City of Darkhan, Mongolia - A Practicable Example}, doi = {10.25643/bauhaus-universitaet.3179}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170512-31794}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The world society faces a huge challenge to implement the human right of "access to sanitation". More and more it is accepted that the conventional approach towards providing sanitation services is not suitable to solve this problem. This dissertation examines the possibility to enhance "access to sanitation" for people who are living in areas with underdeveloped water and wastewater infrastructure systems. The idea hereby is to follow an integrated approach for sanitation, which allows for a mutual completion of existing infrastructure with resource-based sanitation systems. The notion "integrated sanitation system (iSaS)" is defined in this work and guiding principles for iSaS are formulated. Further on the implementation of iSaS is assessed at the example of a case study in the city of Darkhan in Mongolia. More than half of Mongolia's population live in settlements where yurts (tents of Nomadic people) are predominant. In these settlements (or "ger areas") sanitation systems are not existent and the hygienic situation is precarious. An iSaS has been developed for the ger areas in Darkhan and tested over more than two years. Further on a software-based model has been developed with the goal to describe and assess different variations of the iSaS. The results of the assessment of material-flows, monetary-flows and communication-flows within the iSaS are presented in this dissertation. The iSaS model is adaptable and transferable to the socio-economic conditions in other regions and climate zones.}, subject = {Abwasser}, language = {en} } @masterthesis{Tschernyschkow, type = {Bachelor Thesis}, author = {Tschernyschkow, Anton}, title = {Instation{\"a}re W{\"a}rmeleitung in geschichteten W{\"a}nden}, doi = {10.25643/bauhaus-universitaet.3601}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170914-36014}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {61}, abstract = {Analytische L{\"o}sung der W{\"a}rmeleitungsgleichung f{\"u}r inhomogene Medien um ortsver{\"a}nderliche Materialeigenschaften zuzulassen, womit die sprunghafte {\"A}nderung der Stoffkennwerte n{\"a}herungsweise erfasst werden kann. Dazu ist ein Sturm-Liouville-Problem zu l{\"o}sen.}, subject = {W{\"a}rmeleitung}, language = {de} } @article{Vogl, author = {Vogl, Joseph}, title = {{\"U}ber Axel Maliks "skripturale Methode"}, doi = {10.25643/bauhaus-universitaet.3668}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171130-36683}, abstract = {Vortrag, gehalten am 20.08.2017 zur Er{\"o}ffnung der Ausstellung "Die Bibliothek der unlesbaren Zeichen" im Audimax der Bauhaus-Universit{\"a}t Weimar}, subject = {Kunst}, language = {de} } @article{Vollmer, author = {Vollmer, Lisa}, title = {Keine Angst vor Alternativen. Ein neuer Munizipalismus}, series = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2017}, journal = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 5, Heft 3}, doi = {10.25643/bauhaus-universitaet.3712}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171130-37124}, pages = {147 -- 156}, abstract = {Die Idee eines neuen Munizipalismus wird in den linken sozialen Bewegungen Europas und dar{\"u}ber hinaus breit diskutiert. Munizipalistische Bewegungen streben es an, kommunale Regierungen zu {\"u}bernehmen oder zu beeinflussen, um lokale Institutionen (wieder) gemeinwohlorientiert auszurichten, ein neues Verh{\"a}ltnis zwischen kommunalen Regierungen und sozialen Bewegungen zu schaffen und so die Art wie Politik gestaltet wird von unten her zu demokratisieren und institutionelle Rahmenbedingungen zu ver{\"a}ndern. Sie entstehen in Reaktion auf die aktuelle {\"o}konomische und politische Krise - ebenso wie neue rechte und rechtspopulistische Bewegungen, als deren Gegenpart sie sich verstehen. Mit Mut und konkreten Utopien will man der multiplen st{\"a}dtischen Krise begegnen, statt mit Angst und Angstmacherei wie rechte Bewegungen. Deshalb trafen sich im Juni 2017 {\"u}ber 600 Vertreter_innen dieser munizipalistischen Bewegungen auf Einladung Barcelona en Com{\´u}s.}, subject = {Stadtforschung}, language = {de} } @phdthesis{Wenzel, author = {Wenzel, Jakob}, title = {Design and Analysis of Cryptographic Algorithms for Authentication}, doi = {10.25643/bauhaus-universitaet.3714}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171208-37140}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {During the previous decades, the upcoming demand for security in the digital world, e.g., the Internet, lead to numerous groundbreaking research topics in the field of cryptography. This thesis focuses on the design and analysis of cryptographic primitives and schemes to be used for authentication of data and communication endpoints, i.e., users. It is structured into three parts, where we present the first freely scalable multi-block-length block-cipher-based compression function (Counter-bDM) in the first part. The presented design is accompanied by a thorough security analysis regarding its preimage and collision security. The second and major part is devoted to password hashing. It is motivated by the large amount of leaked password during the last years and our discovery of side-channel attacks on scrypt - the first modern password scrambler that allowed to parameterize the amount of memory required to compute a password hash. After summarizing which properties we expect from a modern password scrambler, we (1) describe a cache-timing attack on scrypt based on its password-dependent memory-access pattern and (2) outline an additional attack vector - garbage-collector attacks - that exploits optimization which may disregard to overwrite the internally used memory. Based on our observations, we introduce Catena - the first memory-demanding password-scrambling framework that allows a password-independent memory-access pattern for resistance to the aforementioned attacks. Catena was submitted to the Password Hashing Competition (PHC) and, after two years of rigorous analysis, ended up as a finalist gaining special recognition for its agile framework approach and side-channel resistance. We provide six instances of Catena suitable for a variety of applications. We close the second part of this thesis with an overview of modern password scramblers regarding their functional, security, and general properties; supported by a brief analysis of their resistance to garbage-collector attacks. The third part of this thesis is dedicated to the integrity (authenticity of data) of nonce-based authenticated encryption schemes (NAE). We introduce the so-called j-IV-Collision Attack, allowing to obtain an upper bound for an adversary that is provided with a first successful forgery and tries to efficiently compute j additional forgeries for a particular NAE scheme (in short: reforgeability). Additionally, we introduce the corresponding security notion j-INT-CTXT and provide a comparative analysis (regarding j-INT-CTXT security) of the third-round submission to the CAESAR competition and the four classical and widely used NAE schemes CWC, CCM, EAX, and GCM.}, subject = {Kryptologie}, language = {en} } @phdthesis{Yuli, author = {Yuli, Nensi Golda}, title = {The Spatial Concept at Moslem Settlements in Current Context of Modern Indonesia Using Phenomenology Method . Case Study: Pathok Negoro Area in Yogyakarta, Indonesia}, doi = {10.25643/bauhaus-universitaet.3125}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170419-31257}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {206}, abstract = {Settlement is human place to live and do various activities (Finch, 1980). Concept of settlement layout is closely associated with human and a set of thoughts and behaviors. In this case, idea of pattern of activities in a society that is core of a culture becomes main factor in process of formation of houses and environment in a settlement. Factors which affecting form (physical) of architecture in a settlement environment are socio-cultural, economic, and religious determinant factor that manifested architectural realization (Rapoport, 1969). Yogyakarta as the continuation of kingdom city in the Java Island finally exists as an Islamic kingdom that still remain to survive up to now. Impacts of this issue is appearance of various Moslem settlements to support typical character of an Islamic Kingdom. Mlangi is an area of oldest Moslem settlements in Yogyakarta has not been explored in details for progress especially in physical glasses recently. Everything basic group and individual who arrange houses and residences, starts from how it has spatial concept alone. Although concept is a very abstract thing to explain in details, but its existence can be detected by how they created their physical environment. This research conducted by these research questions: (1) What are spatial concepts owned by people in Mlangi and (2) How do spatial concepts owned by the people affect the settlements pattern? Process to search spatial concept owned by the people in Moslem residence, making Mlangi as study area, was approached by using phenomenological research method. The researcher have to self-involved directly in unstructured interviews, but remained in guideline framework of in interviews to make research process effective. Fistly, the researcher interviewed the key person, they are the head of Mlangi administration (pak Dukuh) in Mlangi and Sawahan. They were then give advices to who was capable person that could draw the spatial concept and had many story and knew the history of the settlements. Step by step of interview guided from one informant to next informant when the information had been told repeatedly. The next informant based on the last informant advice or who had close relationship with the last theme appeared. To complete the narration and draw the result of interview, researcher have to add additional information with photograph and descriptive picture that can be draw the settlement empirically. In process, 17 information units which found in field were consistent with sequence of interview events and flowing of theme to theme associated with Moslem residence of residence. Finally the interviews succeeded in abstracting 16 themes that may be classified into historic, socio-cultural, and spatial-concept dimensions in Mlangi. Process of analysis to find spatial concept owned by the people in Moslem settlements was carried out by dialogue of themes to find available substantive relationship. Four concepts successfully analyzed consist of concepts of personage, concept of religious implementation, concept of Jero-Jaba and concept of Interest. The four concepts are really associated with one and others in understanding how spatial concept owned by the people affects residence they occupy. Yet, concept of Jero-Jaba bases all concepts of people in Mlangi . This concept can be used to draw red yarn on how they utilize communal spaces in residence and layout rooms of their individual houses. This concept also eternalize residence patterns existing in Mlangi now where residence does not experience many changes from starting of this residence existence (from detection of generation currently still living), namely residence patterns concentrate on orientation to Masjid Pathok Negoro of Mlangi. This research was opening the potential research area, at least for the sociology, anthropology and demography research interest. So many unique character in Mlangi if looked at from how they maintain their spatial concept and manifested in their daily activities. How the people will concern only for the religious activities and the economic concern only for survival aspect in live. Keywords: spatial concept, moslem settlements, phenomenology method, Indonesia,}, subject = {Siedlung}, language = {en} } @article{ZanderWetzelKuehletal., author = {Zander, Steffi and Wetzel, Stefanie and K{\"u}hl, Tim and Bertel, Sven}, title = {Underlying Processes of an Inverted Personalization Effect in Multimedia Learning - An Eye-Tracking Study}, series = {Frontiers in Psychology}, volume = {2017}, journal = {Frontiers in Psychology}, number = {Volume 8, Article 2202}, doi = {10.3389/fpsyg.2017.02202}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180312-37342}, pages = {1 -- 16}, abstract = {One of the frequently examined design principles recommendations in multimedia learning is the personalization principle. Based on empirical evidence this principle states that using personalised messages in multimedia learning is more beneficial than using formal language (e.g. using 'you' instead of 'the'). Although there is evidence that these slight changes in regard to the language style affect learning, motivation and the perceived cognitive load, it remains unclear, (1) whether the positive effects of personalised language can be transferred to all kinds of content of learning materials (e.g. specific potentially aversive health issues) and (2) which are the underlying processes (e.g. attention allocation) of the personalization effect. German university students (N= 37) learned symptoms and causes of cerebral haemorrhages either with a formal or a personalised version of the learning material. Analysis revealed comparable results to the few existing previous studies, indicating an inverted personalization effect for potentially aversive learning material. This effect was specifically revealed in regard to decreased average fixation duration and the number of fixations exclusively on the images in the personalised compared to the formal version. This result can be seen as indicators for an inverted effect of personalization on the level of visual attention.}, subject = {Lernen}, language = {en} } @article{ZhangHaoWangetal., author = {Zhang, Chao and Hao, Xiao-Li and Wang, Cuixia and Wei, Ning and Rabczuk, Timon}, title = {Thermal conductivity of graphene nanoribbons under shear deformation: A molecular dynamics simulation}, series = {Scientific Reports}, journal = {Scientific Reports}, doi = {10.1038/srep41398}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31718}, abstract = {Tensile strain and compress strain can greatly affect the thermal conductivity of graphene nanoribbons (GNRs). However, the effect of GNRs under shear strain, which is also one of the main strain effect, has not been studied systematically yet. In this work, we employ reverse nonequilibrium molecular dynamics (RNEMD) to the systematical study of the thermal conductivity of GNRs (with model size of 4 nm × 15 nm) under the shear strain. Our studies show that the thermal conductivity of GNRs is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16\% before the pristine structure is broken. Furthermore, the phonon frequency and the change of the micro-structure of GNRs, such as band angel and bond length, are analyzed to explore the tendency of thermal conductivity. The results show that the main influence of shear strain is on the in-plane phonon density of states (PDOS), whose G band (higher frequency peaks) moved to the low frequency, thus the thermal conductivity is decreased. The unique thermal properties of GNRs under shear strains suggest their great potentials for graphene nanodevices and great potentials in the thermal managements and thermoelectric applications.}, subject = {W{\"a}rmeleitf{\"a}higkeit}, language = {en} } @article{ZhangNanthakumarLahmeretal., author = {Zhang, Chao and Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon}, title = {Multiple cracks identification for piezoelectric structures}, series = {International Journal of Fracture}, journal = {International Journal of Fracture}, pages = {1 -- 19}, abstract = {Multiple cracks identification for piezoelectric structures}, subject = {Angewandte Mathematik}, language = {en} }