@inproceedings{WillenbacherHuebler2000, author = {Willenbacher, Heiko and H{\"u}bler, Reinhard}, title = {Relationen zwischen Dom{\"a}nenmodellen Ansatz zur Schaffung einer integrierenden computergest{\"u}tzten Bauplanungsumgebung}, doi = {10.25643/bauhaus-universitaet.617}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6178}, year = {2000}, abstract = {Die zunehmend erforderliche Kooperation verschiedener Beteiligter unterschiedlicher Fachbereiche und der Einsatz hochspezialisierter Fachapplikationen in heterogenen Systemumgebungen unterstreichen die Bedeutung und Notwendigkeit neuer Konzepte und M{\"o}glichkeiten zur Schaffung einer computergest{\"u}tzten Integrationsebene. Ziel einer computergest{\"u}tzten Integrationsebene ist die Verbesserung der Kooperation und Kommunikation unter den Beteiligten. Grundlage daf{\"u}r ist die Etablierung eines effizienten und fehlerfreien Daten- und Informationsaustausches zwischen den verschiedenen Fachplanern und -applikationen. Die Basis f{\"u}r die Datenintegrationsebene bildet ein digitales Bauwerksmodell im Sinne eines >virtuellen Bauwerks<, welches alle relevanten Daten und Informationen {\"u}ber ein zu planendes oder real existierendes Bauwerk zur Verf{\"u}gung stellt. Bei der Verwirklichung einer Bauwerksmodell-orientierten Datenintegrationsebene und deren Modellverwaltung erweist sich speziell die Definition des Bauwerksmodells also die Spezifikation der relevanten auszutauschenden Daten als {\"a}ußerst komplex. Der hier vorzustellende Relationen-orientierte Ansatz, d.h. die Realisierung des Daten- und Informationsaustauschs mittels definierter Relationen und Beziehungen zwischen dynamisch modifizierbaren Dom{\"a}nenmodellen, bietet Ans{\"a}tze zur: * Verringerung und Beherrschung der Komplexit{\"a}t des Bauwerksmodells (Teilmodellbildung) * Realisierung eines effizienten Datenaustauschs (Relationenmanagement) Somit stellt der Relationenorientierte Ansatz einen ad{\"a}quaten L{\"o}sungsweg zur Modellierung eines digitalen Bauwerksmodells als Datenintegrationsebene f{\"u}r den Lebenszyklus eines Bauwerkes dar.}, subject = {Bauwesen}, language = {de} } @inproceedings{SchlegelRautenstrauch2000, author = {Schlegel, Roger and Rautenstrauch, Karl}, title = {Numerische Simulation von Mauerwerk als Kontinuum}, doi = {10.25643/bauhaus-universitaet.610}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6106}, year = {2000}, abstract = {Im vorliegenden Beitrag wird ein in das FE-Programmsystem ANSYS implementiertes elastoplastisches Berechnungsmodell zur nichtlinearen, r{\"a}umlichen Untersuchung von Mauerwerkstrukturen vorgestellt. Die Modellierung des heterogenen Baustoffs Mauerwerk erfolgt mit Hilfe eines verschmierten Ersatzkontinuums. Das anisotrope Materialverhalten wird sowohl hinsichtlich der Spannungs-Dehnungsbeziehung als auch bei der Beschreibung der Festigkeit ber{\"u}cksichtigt. Durch die Verwendung einer zusammengesetzten Fließbedingung ist es m{\"o}glich, das Versagen der einzelnen Mauerwerkkomponenten Stein und M{\"o}rtelfugen und des Verbundes zu ber{\"u}cksichtigen. Dadurch ist die Anwendbarkeit des Modells f{\"u}r mehrere Mauerwerksarten gegeben. Die hierf{\"u}r verwendeten Materialparameter sind aus einfachen Kleink{\"o}rperversuchen bestimmbar oder innerhalb gewisser Grenzen aus empirischen Formeln berechenbar. Die notwendige Beschr{\"a}nkung der Anzahl der Materialparameter sichert die praktische Anwendbarkeit des entwickelten Berechnungsmodells. Die numerische Umsetzung des hier verwendeten impliziten Berechnungsverfahrens l{\"a}sst sich in eine lokale und eine globale Iterationsebene gliedern. Die lokale Iteration am Integrationspunkt dient der Spannungsr{\"u}ckf{\"u}hrung. Dabei sind die Besonderheiten der Verarbeitung mehrfl{\"a}chiger Fließfiguren zu beachten. Die globale Iteration auf Systemebene sichert die Umlagerung des Residuums. Mit der Nachrechnung von Versuchsergebnissen soll das entwickelte Modell verifiziert und seine physikalische Leistungsf{\"a}higkeit eingesch{\"a}tzt werden.}, subject = {Mauerwerk}, language = {de} } @inproceedings{Phirsof2000, author = {Phirsof, Alexander}, title = {Research of special models describing technological processes}, doi = {10.25643/bauhaus-universitaet.607}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6072}, year = {2000}, abstract = {The technological processes, schedules, parallel algorithms, etc., having some technological limitations and exacting increases of efficiency of their execution can be described through digraphs, on which the appropriate optimization problem (construction of optimal scheduling of tops of digraph) can be solved. The problems, researched in the given operation, have a generally following statement: The problem 1: Under the given graph G and option value h to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, l). The problem 2: Under the given graph G and option value l to construct parallel scheduling of tops of digraph of minimum width. Let's designate the problem S(G, l, h). The problem 3: Under the given graph G, option value h and periods of execution of operations di, i=1, …, n to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, di, l). The problems 1,2,3 in a case when h-arbitrary have exponential complexity. In operation the method of solution of the problem S(T, h, di, l) is offered on the basis of choice of tops having greatest weight. The approach to solution of the problem S(G, 3, l) is offered, where G the graph satisfying property : S[i] =S [i], i=1, …, l. For obtaining a rating of width of scheduling on an available estimator of length, we offer to use iterative algorithm of polynomial complexity, on which each step the current value of width of scheduling is set, which is used for specification of length of scheduling.}, subject = {Ablaufplanung}, language = {en} } @inproceedings{MilbradtRose2000, author = {Milbradt, Peter and Rose, Martin}, title = {Numerische Approximation makroskopischer Verkehrsmodelle mit der Methode der Finiten Elemente}, doi = {10.25643/bauhaus-universitaet.604}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6046}, year = {2000}, abstract = {Makroskopische Verkehrsmodelle sind ein wesentliches Hilfsmittel bei der Beurteilung und Steuerung von Verkehrsfl{\"u}ssen auf Hauptverkehrsadern. F{\"u}r die notwendige Beeinflussung des Verkehrsablaufs werden Online-Messungen und prognostische numerische Simulationen ben{\"o}tigt. F{\"u}r die Simulationen bieten sich makroskopische Verkehrsmodelle an, die den Verkehr als kontinuierliche Fahrzeugstr{\"o}meabbilden. Aufgrund der Analogie zu den Modellen der Str{\"o}mungsmechanik lassen sich die numerischen Verfahren aus diesem Bereich auch zur L{\"o}sung makroskopischer Verkehrsmodelle verwenden. Es wird eine Finite-Elemente-Approximation f{\"u}r die numerische Umsetzung makroskopischer Verkehrsmodelle vorgestellt. Exemplarisch wird sie am Verkehrsmodell von Kerner und Konh{\"a}user erl{\"a}utert. Dieses und andere makroskopische Verkehrsmodelle wurden bisher mit der Methode der Finiten Differenzen gel{\"o}st. Die vorgestellte Approximation entspricht einem Petrov-Galerkin-Verfahren, bei dem der Fehler eines Standard-Galerkin-Verfahrens mit Hilfe eines Upwinding-Koeffizienten minimiert wird. Die Wahl des Upwinding-Koeffizienten ist {\"u}bertragbar und basiert ausschließlich auf dem Charakter der zugrundeliegenden Gleichungen. Die Ergebnisse zeigen typische Ph{\"a}nomene eines Verkehrsablaufs wie die Entstehung von Stop-and-Go-Wellen oder Staus. Die Finite-Elemente-Methode erweist sich f{\"u}r unter-schiedlichste Verkehrsmodelle als ausgesprochen stabil.}, subject = {Verkehrsleitsystem}, language = {de} } @inproceedings{KuwataShinozaki2000, author = {Kuwata, Hitoshi and Shinozaki, M.}, title = {Web-based System for Visualization of Distribution Patterns of Solar Energy and Sky Factor on Outdoor Open Spaces}, doi = {10.25643/bauhaus-universitaet.602}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6026}, year = {2000}, abstract = {This study aims at constructing the simulation system of distribution patterns of solar irradiance, sunshine duration and sky factor with the user-friendly interface and sharing this system with users on the Internet. The characteristics of this simulation system are as follows: (1) Web-based user interface, (2) Accessible system through the Internet and (3) Sunlight and skylight simulation based on physically accurate equations with considering various sky conditions and the reflection from the surface of objects. As a case study, impact of the development plans are analyzed and evaluated using this system. Solar irradiance, sunshine duration and sky factor are calculated at the surface of the buildings and open spaces every 10 minutes from 8 to 16 on the winter solstice. The values of these indices are expressed as the ratio to those calculated under the condition with no buildings. In conclusion, this web-based simulation system can be useful for visualizing the sunlight and skylight conditions on outdoor open spaces and the surface of the buildings to evaluate development plans objectively. Users can make access to the system from almost all of the computers connected with the Internet and modify parameters by themselves to get desirable results. Further improvement of the user interface is necessary using more advanced technology of CGI, Java and JavaScript.}, subject = {Sonnenstrahlung}, language = {en} } @inproceedings{Molkenthin2000, author = {Molkenthin, Frank}, title = {WWW based Simulation Systems and Project Platforms in Civil Engineering}, doi = {10.25643/bauhaus-universitaet.597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5972}, year = {2000}, abstract = {The availability of the WWW technology and the introduction of the Internet as basic resource like water, electricity or gas changes dramatically normal live, business and of course civil engineering. New technologies enable innovative technical solutions and offer new potential for improvements towards support of humans nature appropriate ways of working. This demands a new culture of work and collaboration. To contribute to theses challenges is a matter the discipline 'Bauinformatik' by supporting related research, development, education and training in civil engineering. This contribution to the IKM Conference 2000 in Weimar sketches selected research and education activities of the institutes of the authors on the topics of WWW based simulation systems (example WEASEL) and of WWW based project platforms (projects MorWin and TaiGer as well as an European education experiment). Both topics supports the collaboration by new ways of tele cooperation in international, heterogeneous and interdisciplinary engineering. Demonstration from this developments and projects will be used to illustrate the dimension of changes in civil engineering in due to modern ICT.}, subject = {Bauwesen}, language = {en} } @inproceedings{Huhnt2000, author = {Huhnt, Wolfgang}, title = {Modellierung der Prozesse als Basis der Informationssysteme f{\"u}r Bauunternehmen}, doi = {10.25643/bauhaus-universitaet.596}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5969}, year = {2000}, abstract = {Die fachlichen Grundlagen der Aufgaben, die in einem Bauunternehmen zu bearbeiten sind, wurden in verschiedenen Disziplinen entwickelt. Maßgeblich waren der Baubetrieb und die Betriebswirtschaftslehre. Die parallele Entwicklung hat jedoch dazu gef{\"u}hrt, dass grundlegende Begriff und Verfahren zwischen den Disziplinen nicht aufeinander abgestimmt sind. Die verschiedenen Aufgaben beeinflussen jedoch einander. Innerhalb der jeweiligen Disziplin wurden Informationssysteme entwickelt, mit denen sich die Aufgaben aus der jeweiligen Disziplin bearbeiten lassen. Zur Verbindung der "verschiedenen Welten" existieren zwar ausgew{\"a}hlte Schnittstellen, eine durchg{\"a}ngige verteilte Bearbeitung der verschiedenen Aufgaben wird jedoch noch nicht umfassend unterst{\"u}tzt. Im vorliegenden Beitrag wird ein Vorgehen vorgestellt, auf dessen Grundlage eine verteilte Bearbeitung der fachgebiets{\"u}bergreifenden Aufgaben erfolgen kann. Das Vorgehen beruht auf der Modellierung der Prozesse sowie der zur Bearbeitung der als Bestandteil der Prozesse spezifizierten Aufgaben ben{\"o}tigten Informationen. Dieses Modell wird auf der Grundlage der Mengenlehre mit einem entsprechenden Werkzeug aufgebaut. Die Spezifikation der Informationen wird genutzt, um Datenbankschemata zu generieren, die Spezifikation der Aufgaben wird genutzt, um Werkzeuge zur Bearbeitung zu identifizieren. Diese Werkzeuge sind in Java als Applets implementiert und k{\"o}nnen {\"u}ber entsprechende Treiber auf die Datenbanken zugreifen. Das Prozessmodell wird in einem n{\"a}chsten Schritt erweitert. Personen werden eingef{\"u}hrt. Diesen Personen werden Aufgaben zugewiesen, deren Bearbeitung sie ausf{\"u}hren sollen. Auf der Grundlage des erweiterten Prozessmodells werden die Applets, die eine Person ben{\"o}tigt, auf einer entsprechenden Internet-Seite zusammengestellt. Damit kann projektspezifisch ein Informationssystem zusammengestellt werden, das eine verteilte Bearbeitung der verschiedenartigen Aufgaben unterst{\"u}tzt.}, subject = {Baubetrieb}, language = {de} } @article{PiskunovMarchuk1997, author = {Piskunov, V. G. and Marchuk, A. V.}, title = {Model of stressed-strained State of Multilayer Masses with regard for Non-Ideal Contact of Layers}, doi = {10.25643/bauhaus-universitaet.542}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5427}, year = {1997}, abstract = {Thus, mathematical model stressed- strained of a condition of layered masses is constructed. The model has high accuracy. It allows to simulate slippery contact of layers without friction. Thus not the order of permitting system of the equations is increased, and at its realization the method of fenite elements does not increase quantity of required degrees freedom. The differential operators included in system the equations are similar known in the classical theory of shells. It facilitates construction of a finite element. Presence in system of the differential equations of derivative of external forces allows to use her for the decision of contact problems with a stain of contact commensurable with thickness of a masses.}, subject = {Geschichtetes Medium}, language = {en} } @article{ZhakSidorenko1997, author = {Zhak, S. V. and Sidorenko, V. S.}, title = {Optimized Models of Modes Choice for Displacement of technical Systems Objects}, doi = {10.25643/bauhaus-universitaet.534}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5347}, year = {1997}, abstract = {The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.}, subject = {Modellierung}, language = {en} } @article{MinchTrochanowski1997, author = {Minch, M. J. and Trochanowski, A.}, title = {The numerical Modelling and Analysis of RC cracked Structures}, doi = {10.25643/bauhaus-universitaet.527}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5278}, year = {1997}, abstract = {The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown.}, subject = {Tragwerk}, language = {en} } @article{KazakevitchKulyabkoDubichvost1997, author = {Kazakevitch, M. I. and Kulyabko, V. V. and Dubichvost, A. A.}, title = {The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads}, doi = {10.25643/bauhaus-universitaet.521}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5219}, year = {1997}, abstract = {In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.}, subject = {Verbundtragwerk}, language = {en} } @article{FischerSteinhage1997, author = {Fischer, A. and Steinhage, V.}, title = {Ein modellbasiertes Konzept zur st{\"a}dteplanerischen Kartierung durch digitale Bildanalyse}, doi = {10.25643/bauhaus-universitaet.487}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4870}, year = {1997}, abstract = {There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets}, subject = {Stadtplanung}, language = {de} } @article{Rudnicki1997, author = {Rudnicki, Andrzej}, title = {Investigation by Computer Simulation - some aspect of transportation service reliability in urban public transport}, doi = {10.25643/bauhaus-universitaet.482}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4829}, year = {1997}, abstract = {Essence of service unreliability on account of irregularity has been given. The reasons of occurance of overcrowded vehicles have been listed. The factor of service unreliability on account of irregularity has been determined. It is probability of the event, that the passenger finds departing vehicle fully filled, i.e. when all places seating and standing are occupied or condition of the travel, which would be not acceptable for passenger. Large dispersion of headways (i.e. irregularity) increases probability of such situations. To calculate the mentioned factor, the computer simulation was used. Both, passenger arrivals and vehicle operation have been modelled as stochastic interacted processes. Distributions of headways and passenger arrivals have been fixed by statistical methods. The >maximal capacity< of a vehicle has been determined. The set of parameters values for simulation runs has been given. The transformed results of computer simulation are series of nomographs for determination of a factor value. They were prepared for many types of trams and city buses, but only one nomograph has been presented. Difficulties in verification of model were discussed. Recommendations for rational utilisation level of public transport means capacity in the condition of randomness of passenger arrivals and disturbances in vehicle operation have been proposed. The other possibilities of service unreliability have been mentioned. General conclusions have been given}, subject = {{\"O}ffentlicher Personennahverkehr}, language = {en} } @article{Dudek1997, author = {Dudek, Mariusz}, title = {Modellierung der Verkehrsmittelwahl}, doi = {10.25643/bauhaus-universitaet.481}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4817}, year = {1997}, abstract = {Die Zielstellung der Modal­Split­Betrachtungen l{\"a}uft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel ausw{\"a}hlen. In dieser Ver{\"o}ffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgew{\"a}hlte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das f{\"u}r die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde .}, subject = {Verkehrsmittelwahl}, language = {de} } @article{Rebolj1997, author = {Rebolj, D.}, title = {A Product Model of a Road}, doi = {10.25643/bauhaus-universitaet.458}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4584}, year = {1997}, abstract = {Many errors and delays frequently appear when data is exchanged between particular tasks in the lifecycle of the road. Inter-task connections are therefore of great importance for the quality of the final product. The article describes a product model of a road wich is the kernel of an integrated information system intended to support all important stages of the road lifecycle: design, evaluation (through different analysis procedures), construction, and maintainance. Since particular tasks are often executed at different places and in different companies, the interconnections are supported by a special metafile which contains all specific data of the product model. The concept of the integrated system is object and component oriented. Additionally, existing conventional program packages are included to support some common tasks (methods). A conventional relational database system as well as an open spatial database system with the relevant GIS functionality are included to support the data structures of the model.}, subject = {Straße}, language = {en} } @article{WehnerSteinmannHuebler1997, author = {Wehner, R. and Steinmann, Frank and H{\"u}bler, Reinhard}, title = {FLEXOB - Entwicklungstool f{\"u}r dynamische, modellbasierte CAD-Systeme}, doi = {10.25643/bauhaus-universitaet.457}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4571}, year = {1997}, abstract = {Objektorientierte Modellierungstechniken werden gegenw{\"a}rtig vor allem Entwicklern von CAD-Systemen angeboten. Sie erzeugen {\"u}ber die Schritte OO-Modellanalyse und OO-Softwaredesign OO-Programme, die mit ihrer Compilation das durch den Softwareingenieur gefundene Modell festschreiben. Generell, aber insbesondere im Bauwerksdesign, ist dieses Vorgehen unbefriedigend, da hier eine Normung von Modellen nicht gelingt, der Entwurfsprozeß vergleichsweise lang ist und eine Kooperation von Ingenieurgewerken mit verschiedenen Modelldom{\"a}nen die Regel sind. Dar{\"u}ber hinaus weisen die Modelle in fr{\"u}hen Phasen ein hohes Maß an Unsch{\"a}rfe und Abstraktion auf. CAD-Tools, die diese Phasen unterst{\"u}tzen, ben{\"o}tigen deshalb: statt eines genormten Produktmodells ein einheitliches, kognitiv begr{\"u}ndetes Modellstrukturierungsparadigma, f{\"u}r das mit der Objektorientierung eine m{\"o}gliche Auspr{\"a}gung gegeben ist, ein explizites, verf{\"u}gbares Dom{\"a}nenmodell zur fortw{\"a}hrenden Interpretation von Bauwerksmodellen, deskriptive Elemente, die die Interpretation von Objekten und Attributen erleichtern, ein Konzept zur Behandlung von Unsch{\"a}rfe und Abstraktion. Hieraus ergeben sich f{\"u}r die Entwicklung von CAD-Systemen folgende Forderungen : Explizite Verf{\"u}gbarkeit von Klassenobjekten und deren Erzeugung und Ver{\"a}nderung zur Laufzeit, Vererbung auf Klassen- und Instanzniveau, Erweiterte Attributkonzepte (Facetten), Unterst{\"u}tzung der Aggregation als einer wesentlichen Modellstrukturierungsrelation, Verf{\"u}gbarkeit von OO-Schnittstellen zum Aufbau von CAD-Systemen aus Tools einerseits, sowie zur Trennung von Modellverwaltung und Modellrepr{\"a}sentation andererseits. Als ein herausragendes Merkmal des Objektorientierten Paradigmas wird die Anwendungsn{\"a}he genannt, da Erscheinungen der behandelten Dom{\"a}ne sich analog in Modellen und Programmen wiederfinden (sollen). Unter der Grundannahme, daß dieses Paradigma auch durch den Anwender zur Erstellung seiner Modellwelten verwendet wird, will FLEXOB eine homogene Umgebung schaffen, die die Modellwelt des Softwareingenieurs zu Analysezwecken dem Anwender zur Verf{\"u}gung stellt und die die Erweiterung dieser Modellwelt auf deskriptivem Niveau erm{\"o}glicht. Das Tool FLEXOB und einige wesentliche Implementationsdetails werden im Beitrag vorgestellt. Es handelt sich bei diesem Tools um eine C++ Klassenbibliothek, die entweder als Objektmodul oder als Windows-DLL verwendet werden kann. Aspekte des Nutzungsregimes solch flexibler Modellverwaltungen werden im Beitrag ebenfalls angespochen.}, subject = {CAD}, language = {de} } @article{SteinmannHuebler1997, author = {Steinmann, Frank and H{\"u}bler, Reinhard}, title = {Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme}, doi = {10.25643/bauhaus-universitaet.456}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4568}, year = {1997}, abstract = {F{\"u}r die Gestaltung einer durchg{\"a}ngigen Unterst{\"u}tzung des Entwurfsprozesses stehen gegenw{\"a}rtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repr{\"a}sentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen ber{\"u}cksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. F{\"u}r ein echtes CADesign bildet dessen Kl{\"a}rung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise {\"a}hnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivit{\"a}ten ergeben sich f{\"u}r: die Systematisierung computergest{\"u}tzter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsf{\"a}higen UNDO- bzw. TMS-Mechanismen.}, subject = {CAD}, language = {de} } @inproceedings{RaueTimmlerSchueler1997, author = {Raue, Erich and Timmler, Hans-Georg and Sch{\"u}ler, H.}, title = {Anwendung der mathematischen Optimierung bei der physikalisch und geometrisch nichtlinearen Analyse und Bemessung seismisch beanspruchter Tragwerke}, doi = {10.25643/bauhaus-universitaet.442}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4421}, year = {1997}, abstract = {Moderne Bemessungskonzepte f{\"u}r seismisch beanspruchte Hochbauten, wie die Methode der Kapazit{\"a}ts-bemessung, planen inelastisches Verhalten einzelner Bereiche der Konstruktion beim Entwurf bewußt ein, um so einen Teil der durch das Beben eingetragenen Energie als inelastische Form{\"a}nderungsarbeit zu absorbieren. Wird bei Akzeptanz inelastischen Verhaltens eine bestimmte Belastungsintensit{\"a}t, die als adaptive Grenzlast oder Einspiellast bezeichnet wird, {\"u}berschritten, kann es infolge zyklischer Einwirkungen zu einer unbe-grenzten Akkumulation inelastischer Deformationen kommen. Die adaptive Grenzlast stellt damit f{\"u}r zyklische Einwirkungen eine geeignete Kenngr{\"o}ße zur Bewertung der Tragwerksqualit{\"a}t dar, bei der neben der Sicherung des Gleichgewichts ein bestimmtes Sch{\"a}digungsniveau nicht {\"u}berschritten wird. Im vorliegenden Beitrag werden die Grundz{\"u}ge eines Bemessungs- und Nachweiskonzeptes f{\"u}r seismisch beanspruchte Stahlbetontragwerke, das unter Einbeziehung der Grundprinzipe der Kapazit{\"a}tsbemessung von einem einheitlichen Kriterium zur Beschreibung des Grenzzustandes der Tragf{\"a}higkeit auf der Basis der adaptive Grenzlast ausgeht, vorgestellt. Dabei ist die Absch{\"a}tzung der Verformungen notwendiger Bestandteil des Nachweis- bzw. Bemessungskonzeptes. Bei Druckgliedern ist die Ber{\"u}cksichtigung des Einflusses der Verformungen notwendiger Bestandteil des Bemessungskonzeptes. Entsprechende Erweiterungen der Berechnungsmodelle zur Ber{\"u}cksichtigung des Einflusses geometrisch nichtlinearer Effekte im Sinne einer Theorie II. Ordnung werden vorgestellt.}, subject = {Bauwerk}, language = {de} } @inproceedings{KirichukKoeppler1997, author = {Kirichuk, A. and K{\"o}ppler, H.}, title = {Numerical Algorithms and Computer Modeling for nonlinear Analysis of Shell Structures}, doi = {10.25643/bauhaus-universitaet.438}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4382}, year = {1997}, abstract = {The dynamic behaviour of shells, which are widely used in construction and mechanical engineering as critical components of machinery and 3-D structures, under static and dynamic loadings is described by system of deep nonlinear differential equations. Solution of these equations can be received with assistance of technique basing on a modern numerical algorithms and computer modeling.. The system of nonlinear differential equations of vibration of the shells is proposed taking into account the inertia forces in the tangential and normal directions. Its solution is based on combination of parameter prolongation method, finite-difference method and the Newton-Kantorovich iterative algorithm that allows plotting the loading trajectories and determination of bifurcation points on them. Package of Applied Programs >SEVSOR< is a computation means to be used in research of deformation, stability and vibration in thin axically-symmetric shells of complicated shape Input data include information on shell geometry, physical and mechanical properties, bearing conditions, types of loadings and load application. Frame output of motion forms in real time or either in decelerated or accelerated time scales for creating cartoons or video films is used for analysis of the compound dynamic processes in shell-type structures.}, subject = {Schale}, language = {en} } @inproceedings{LaabsPahl1997, author = {Laabs, Andreas and Pahl, Peter Jan}, title = {Das Beobachterkonzept zum Erhalt der Konsistenz in Datenmodellen}, doi = {10.25643/bauhaus-universitaet.431}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4310}, year = {1997}, abstract = {Die Aufgaben des Bauingenieurwesens sind dadurch gepr{\"a}gt, daß sowohl die Planung als auch die Ausf{\"u}hrung von Bauwerken h{\"a}ufigen {\"A}nderungen unterliegen. Beschreibt man das Verhalten der Bauwerke und den Bauprozeß im Computer mit Modellen, so {\"a}ndern sich Umfang und Struktur der Modelle als Folge der {\"A}nderung in Planung und Ausf{\"u}hrung. Diesen Vorgang nennt man Dynamisierung des Modells. Die Dynamisierung f{\"u}hrt zu Ver{\"a}nderungen und Inkonsistenzen in den Modellen der Anwendungen. Die Aktualisierung und Abstimmung von Beziehungen innerhalb eines Modells sowie die Sicherung der Konsistenz der Modelle untereinander sind daher von zentraler Bedeutung f{\"u}r die L{\"o}sung von Bauingenieuraufgaben. Seit den letzten 10 Jahren wird die objektorientierte Methode in der Modellierung f{\"u}r Anwendungen im Bauingenieurwesen intensiv entwickelt und eingesetzt. Es hat sich gezeigt, daß die Anwendung dieser Methode in wichtigen Bereichen der Modellierung zu Verbesserungen f{\"u}hrt. Gleichzeitig hat sich aber auch herausgestellt, daß die f{\"u}r das Bauingenieurwesen wichtigen Aspekte der Aktualisierung und der Konsistenz nicht zweckm{\"a}ßig beschreibbar sind. In diesem Beitrag wird eine einfache Modelliermethode in ihrem Konzept und ihrer Realisierung gezeigt, mit der sich die Aktualisierung von Objekten und Modellen sowie die Sicherstellung der Konsistenz in Systemen des Bauingenieurwesens bearbeiten lassen.}, subject = {Bauwerk}, language = {de} } @inproceedings{BergerGraeffWeinberg1997, author = {Berger, Hans and Graeff-Weinberg, K.}, title = {FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-{\"U}bergangselementen}, doi = {10.25643/bauhaus-universitaet.426}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4267}, year = {1997}, abstract = {Detailuntersuchungen an Tragwerken f{\"u}hren bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. W{\"a}hrend in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gew{\"a}hlt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des {\"U}bergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-{\"U}bergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits {\"u}ber nur eine Stufe erzielen l{\"a}ßt. Diese neu entwickelten sogenannten pNh-Elemente erm{\"o}glichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten f{\"u}r h-Verfeinerung). Das wird durch N st{\"u}ckweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht {\"a}quidistant sein braucht. Dar{\"u}ber hinaus ist es m{\"o}glich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der {\"U}bergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung l{\"a}ßt sich dies besonders g{\"u}nstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit {\"U}bergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten {\"U}bergangselementkonzeptes umfassend demonstriert.}, subject = {Tragwerk}, language = {de} } @inproceedings{Wittwer2003, author = {Wittwer, Christof}, title = {ColSim - Eine modulare Simulationsumgebung zur Entwicklung von Regelungsalgorithmen f{\"u}r Embedded Systems in Energieversorgungsanlagen}, doi = {10.25643/bauhaus-universitaet.380}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3803}, year = {2003}, abstract = {Am Fraunhofer ISE wurde in den letzten Jahren die Simulationsumgebung ColSim entwickelt, die sich speziell zur Untersuchung von Regelungssystemen in Geb{\"a}udeenergieversorgungssystemen eignet. Zielsetzung des Designs ist die Umsetzung des simulationsbasierten Regelungsentwurfs, der einen unmittelbaren Einsatz der Regelungsmodule auf sog. Enbedded Systems gestattet. Das Simulationswerkzeug zeichnet sich durch die modulare offene Struktur aus, die eine flexible Erweiterung erm{\"o}glicht (vgl. TRNSYS [1]). Die Implementierung erfolgte im genormten ANSI-C Code, der einen plattform- unabh{\"a}nigen Einsatz gew{\"a}hrleistet. Entwicklungsplattform stellt derzeit ein Linux Cluster dar, als Zielplattform wurden bisher sowohl eingebettete Industrie-PCs wie auch klassische Micro- controller Boards verwendet. Die Entwurfsmethode wird anhand einer Systemregelung f{\"u}r eine solarthermische Anlage mit 120m2 Kollektorfl{\"a}che (SolarThermie2000 Anlage) demonstriert, bei der ein vernetztes Regelungssystem mit Internet-Integration zum Einsatz kommt. Das Regelungssystem verf{\"u}gt seinerseits {\"u}ber ein Betriebssystem (schlankes embedded linux system), das die Kommunikation nach aussen gestattet. Das Regelungssystem vef{\"u}gt somit {\"u}ber Klima- bzw Strahlungsdaten, die f{\"u}r den Regelungsprozess von Bedeutung sind. Die externen Informationen k{\"o}nnen einerseits zur >Einsparung< von Sensorik genutzt werden, andererseits gestatten sie den Einsatz von pr{\"a}diktiver Regelungsmethodik, um den fossilen (Nachheiz-) Energieeinsatz zu minimieren. Mit Hilfe von simulationstechnischen Systemstudien kann ein adaptives Verhalten des Regelungssystems erprobt werden, das eine selbstst{\"a}ndige Strecken- identifikation realieren kann. Beispielsweise soll beim n{\"a}her beschriebenen solarthermischen System die Totzeit bestimmt werden, die sich infolge der Verrohrung zwischen Speicher und Entladegruppe ergibt. Der Betrieb der Entlade- pumpe wird einerseits in Abh{\"a}ngigkeit der Verf{\"u}gbarkeit des Pufferwassers erfolgen, andererseits in Abh{\"a}ngigkeit des erwarteten Zapfvolumens durch den Verbraucher. Die vernetzten Regelungssysteme, die auf Basis der Simulationsmodelle ent- wickelt werden, sollen k{\"u}nftig die gesamte Energieflußanalyse des Geb{\"a}udes realisieren, wobei eine transparente Darstellung des Systemverhaltens auf Basis einer Internet Visualisierung erfolgt. Der Betreiber und Nutzer wird unmittel- bar durch die Online Dienste (SMS,Email,Fax) {\"u}ber das (fehlerhafte) Anlagen- verhalten informiert. Gerade die sensitiven regenerativen Systeme neigen durch ihre Komplexit{\"a}t zu St{\"o}rungen, die oftmals nicht erkannt werden, weil die konventionellen Teilsysteme (z.B. Ergasbrenner) den Ausfall in der Regel >kompensieren<.}, subject = {Geb{\"a}ude}, language = {de} } @inproceedings{WeferlingDonathPetzoldetal.2003, author = {Weferling, Ulrich and Donath, Dirk and Petzold, Frank and Thurow, Torsten}, title = {Neue Techniken in der Bestandserfassung}, doi = {10.25643/bauhaus-universitaet.373}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3734}, year = {2003}, abstract = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. Als ein Teilaspekt wird in diesem Beitrag gezeigt, wie das Handaufmaß unter Einsatz modernen taktiler Erfassungsmethoden eine ganz neue Bedeutung f{\"u}r die Datenerfassung gewinnen kann. Das Potenzial der verschiedenen Verfahren zur Koordinatenbestimmung mit taktilen Werkzeugen wird evaluiert. Daraus wird eine Strategie entwickelt, die f{\"u}r die unterschiedlichen Notwendigkeiten im Planungsfortschritt den optimierten Einsatz der taktilen Erfassung in Kombination mit klassischen Erfassungsmethoden aufzeigt. Die Realisierbarkeit eines derartigen Konzeptes wird durch Fallstudien und m{\"o}gliche Ablaufszenarien f{\"u}r einzelne Verfahren nachgewiesen. Durch die Integration taktiler Messverfahren in die Bestandserfassung kann erreicht werden, dass - relevante (Geometrie-) Informationen in ein umfassendes Bauwerksmodell integriert werden k{\"o}nnen, - die Bauaufnahme wieder im direkten Kontakt zum Bauaufnahmeobjekt erfolgen kann und - die Verfahren so einfach und leicht von allen Beteiligten eingesetzt werden k{\"o}nnen, um die Bauaufnahme und die Planung wieder miteinander zu verzahnen.}, subject = {Geb{\"a}ude}, language = {de} } @inproceedings{Walukiewicz2003, author = {Walukiewicz, Henryk}, title = {Identification of Structural Models as a Problem of Group Representation Theory}, doi = {10.25643/bauhaus-universitaet.372}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3725}, year = {2003}, abstract = {It has been shown that symmetries of moment functions of stochastic processes play an important role in identification of systems. They provide the group-theoretic method of choice of the model structure and model parameters. In the first stage the group-theoretic analysis of some fundamental concepts of stochastic dynamics: stochastic processes and functional series of Volterra-Wiener type has been undertaken. The analysis of group representations of the moment functions of order m for stochastic processes is the basic, original concept of the work. The following groups: symmetric Sm, special affine SAff(m), general linear GL(n, R), GL(n,C) and their subgroups play the main role in the models. In the second stage the informational entropy has been introduced as a measure of the randomness in the identified models. The group-theoretic approach underlines the unity of the nonlinear system identification and leads to useful engineering results in the range of the second-order (stochastic) theory.}, subject = {Bauwerk}, language = {en} } @inproceedings{Raue2003, author = {Raue, Erich}, title = {Anwendung der mathematischen Optimierung bei der Modellbildung und Analyse des nichtlinearen Tragverhaltens von Stahlbetontragwerken}, doi = {10.25643/bauhaus-universitaet.371}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3717}, year = {2003}, abstract = {In den zur{\"u}ckliegenden Jahren wurden an der Professur Massivbau I umfangreiche Untersuchungen zur Modellbildung und rechnerischen Erfassung des Tragverhaltens von Tragwerken und Tragwerkselementen aus Stahlbeton und Spannbeton unter Ber{\"u}cksichtigung von Rißbildungen und Plastizierungen durchgef{\"u}hrt. Diesen Untersuchungen liegt als einheitliches methodisches Konzept der mathematischen Problembeschreibung und Probleml{\"o}sung die mathematische Optimierung zugrunde. Bereits anl{\"a}ßlich des IKM 1994 [1] hatte der Verfasser Gelegenheit, zusammenfassend {\"u}ber Ergebnisse bei der Anwendung der mathematischen Optimierung im Bereich der nichtlinearen Tragwerksanalyse zu berichten. Der vorliegende Beitrag, soll einen {\"U}berblick {\"u}ber seitdem untersuchte Problemkreise und dabei gewonnene Ergebnisse und Erfahrungen vermitteln. Bei der Anwendung der linearen und quadratischen Optimierung sind wegen der geforderten Linearit{\"a}t der Nebenbedingungen Vereinfachungen bei der Modellbildung des stahlbetonspezifischen Tragverhaltens unumg{\"a}nglich. Besonders betroffen sind die Ans{\"a}tze zur Beschreibungen des Materialverhaltens. Durch den Einsatz allgemeiner nichtlinearer mathematischer Optimierungsmethoden l{\"a}sst sich eine methodisch bedingte Linearisierung des Berechnungsmodells umgehen....}, subject = {Tragwerk}, language = {de} } @inproceedings{Vasilkov2003, author = {Vasilkov, Dmitry M.}, title = {Surface design based upon a combined mesh}, doi = {10.25643/bauhaus-universitaet.367}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3671}, year = {2003}, abstract = {The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points.}, subject = {Oberfl{\"a}che}, language = {en} } @inproceedings{ThurowDonathPetzold2003, author = {Thurow, Torsten and Donath, Dirk and Petzold, Frank}, title = {Vision eines mitwachsenden Geometriemodells f{\"u}r die computergest{\"u}tzte Bauaufnahme}, doi = {10.25643/bauhaus-universitaet.365}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3655}, year = {2003}, abstract = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells f{\"u}r das computergest{\"u}tzte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale {\"U}bersicht zu verlieren oder entsprechende r{\"a}umliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterst{\"u}tzt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberfl{\"a}chen}, subject = {Bauaufnahme}, language = {de} } @inproceedings{RueppelMeissnerGutzke2003, author = {R{\"u}ppel, Uwe and Meißner, Iris and Gutzke, Thomas}, title = {Mobile Computing in der Grundwasserbewirtschaftung}, doi = {10.25643/bauhaus-universitaet.354}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3547}, year = {2003}, abstract = {Die Bewirtschaftung von Grundwasser umfasst zum einen die Nutzungserfordernisse und Versorgungsbed{\"u}rfnisse und zum andern den Schutz des Grundwassers als Bestandteil des Naturhaushaltes. Die Verwendung von Informations- und Kommunikationsmethoden zur numerischen Grundwassermodellierung und zur Verwaltung von großfl{\"a}chigen qualitativen und quantitativen Grundwasserinformationen er{\"o}ffnen die M{\"o}glichkeit einer nachhaltigen wasserwirtschaftlichen Planung sowie einer gezielten Steuerung der Auswirkungen von Grundwasserentnahmen und -versickerungen. Im Rahmen des Pilotprojektes Grundwasser-Online im Hessischen Ried (www.grundwasser-online.de) wurden gezielt die Arbeitsabl{\"a}ufe bei der Erfassung der Daten zur Grundwasserbewirtschaftung sowie der anschließenden Verarbeitung analysiert, bewertet und software-technisch umgesetzt. Ein wichtiger Aspekt dabei ist die Datenerfassung an den r{\"a}umlich verteilten Grundwassermessstellen. Der vorliegende Beitrag zeigt auf, wie mobile EDV Ger{\"a}te mit einer geeigneten Software die Arbeitsabl{\"a}ufe beim Einsatz vor Ort effizienter gestalten und die Einhaltung der Messvorgaben unterst{\"u}tzen k{\"o}nnen. Durch die Minimierung von Fehlerquellen kann dabei eine Qualit{\"a}tsverbesserung des Datenbestandes erreicht werden. Es wird ein Konzept zur mobilen Erfassung von Grundwasserdaten unter Verwendung von GPS-Positionsdaten und Plausibilit{\"a}tspr{\"u}fungen vorgestellt. Die Technologien und Herausforderungen bei der prototypischen Umsetzung werden aufgezeigt.}, subject = {Grundwasser}, language = {de} } @inproceedings{RaueTimmlerAdami2003, author = {Raue, Erich and Timmler, Hans-Georg and Adami, Kay}, title = {Physikalisch nichtlineare Analyse von Aussteifungssystemen unter Einbeziehung von Lastfolgeeffekten}, doi = {10.25643/bauhaus-universitaet.349}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3498}, year = {2003}, abstract = {Die physikalisch nichtlineare Analyse von Stahlbetontragwerken unter Ber{\"u}cksichtigung des Einspielverhaltens (adaptives Tragverhalten) mit Methoden der mathematischen Optimierung ist seit Jahren Gegenstand intensiver Forschungsarbeiten am Lehrstuhl Massivbau I der Bauhaus-Universit{\"a}t Weimar. Die dabei entwickelten Modelle und Algorithmen werden im folgenden Beitrag exemplarisch auf die Untersuchung von Aussteifungssystemen in Großtafelbauweise angewendet. Da bei diesen Geb{\"a}uden die aussteifende Konstruktion aus zusammengesetzten großformatigen Betonfertigteilen besteht, wird das Gesamttragverhalten maßgebend durch das Fugentragverhalten bestimmt. Die physikalische Nichtlinearit{\"a}t wird durch das Aufreißen der unbewehrten Horizontalfugen und den verschieblichen Verbund in den Vertikalfugen charakterisiert und entsprechend im Berechnungsmodell ber{\"u}cksichtigt. Beispielrechnungen belegen, dass f{\"u}r die beschriebenen Aussteifungssysteme signifikante Spannungsumlagerungen infolge des nichtlinearen Fugentragverhaltens auftreten. Weiterhin k{\"o}nnen Lastfolgeeffekte rechnerisch nachgewiesen werden. Im Gegensatz zu seismisch beanspruchten Systemen, die in k{\"u}rzester Zeit wiederholt extrem beansprucht werden, ist die Eintrittswahrscheinlichkeit bemessungsrelevanter Windlasten gering.}, subject = {Geb{\"a}ude}, language = {de} } @inproceedings{PopovaDatchevaIankov2003, author = {Popova, E. D. and Datcheva, Maria and Iankov, Roumen}, title = {Mechanical Models with Interval Parameters}, doi = {10.25643/bauhaus-universitaet.348}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3482}, year = {2003}, abstract = {In this paper we consider modelling of composite material with inclusions where the elastic material properties of both matrix and inclusions are uncertain and vary within prescribed bounds. Such mechanical systems, involving interval uncertainties and modelled by finite element method, can be described by parameter dependent systems of linear interval equations and process variables depending on the system solution. A newly developed hybrid interval approach for solving parametric interval linear systems is applied to the considered model and the results are compared to other interval methods. The hybrid approach provides very sharp bounds for the process variables - element strains and stresses. The sources for overestimation when dealing with interval computations are demonstrated. Based on the element strains and stresses, we introduce a definition for the values of nodal strains and stresses by using a set-theoretic approach.}, subject = {Verbundwerkstoff}, language = {en} } @inproceedings{PetzoldWenderDonathetal.2003, author = {Petzold, Frank and Wender, Katrin and Donath, Dirk and Weferling, Ulrich}, title = {Das Bauwerk als Informationscontainer in den fr{\"u}hen Phasen der Bauaufnahme - Ausgangspunkt f{\"u}r die Projektentwicklung und Entwurfsformulierung}, doi = {10.25643/bauhaus-universitaet.347}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3479}, year = {2003}, abstract = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. In dem Beitrag wird ein Konzept und prototypische Realisierung f{\"u}r die durchg{\"a}ngige Unterst{\"u}tzung des gesamten Bauaufnahmeprozesses f{\"u}r Altbausubstanz vorgestellt und diskutiert. Der Fokus liegt auf der fr{\"u}he Phase in der Bauaufnahme als ein Baustein in einer gesamtheitlichen IT-gest{\"u}tzen Planungsumgebung eingegangen. Durch gezielte Aufnahme planungsrelevanter Parameter und Auswertung hinsichtlich Wirtschaftlichkeit und Wiederverwendbarkeit bzw. der Varianten{\"u}berpr{\"u}fung von Nutungskonzepten, werden gerade in dieser Phase wesentliche Entscheidungen f{\"u}r eine kosteng{\"u}nstige Planung getroffen werden. In der Ver{\"o}ffentlichung wird der Fokus auf folgende Punkte gesetzt: - Strukturierung und Aufnahme der Informationen w{\"a}hrend der Erstbegehung - Skizzenhafte Abbildung als Basis f{\"u}r die Formulierung erster Entwurfsintensionen/ Variantenuntersuchungen - Navigations- und Informationsumgebung - gezielte Auswertungsm{\"o}glichkeiten (bspw. Wirtschaftlichkeitsberechnung, Wiederverwendung von Bauteilen, Kalkulation von Abrissmengen)}, subject = {Geb{\"a}ude}, language = {de} } @inproceedings{MostBucher2003, author = {Most, Thomas and Bucher, Christian}, title = {Application of the "fictious crack model" to meshless crack growth simulations}, doi = {10.25643/bauhaus-universitaet.335}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3359}, year = {2003}, abstract = {In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading.}, subject = {Bruchmechanik}, language = {en} } @inproceedings{Loemker2003, author = {L{\"o}mker, Thorsten Michael}, title = {Plausibilit{\"a}t im Planungsprozess - Digitale Planungshilfen f{\"u}r die Bebaubarkeit von Grundst{\"u}cken}, doi = {10.25643/bauhaus-universitaet.329}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3296}, year = {2003}, abstract = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< werden Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung entwickelt. Die Vielfalt der unterschiedlichen Faktoren, die Einfluss auf den Planungsprozess nehmen k{\"o}nnen, sowie deren Abh{\"a}ngigkeiten voneinander werden von heutigen Planungssystemen in nur unzureichender Weise aufbereitet und verwaltet. Diese Faktoren bedingen Planungstools, deren Aufgabe die Beschaffung, Verarbeitung, Integration und Verwaltung von Informationen sowie die Veranschaulichung der komplexen Informationszusammenh{\"a}nge ist. Die Entwicklung solcher Systeme ist technisch m{\"o}glich. Die Schwierigkeit liegt in der Beschaffung und Strukturierung der f{\"u}r den Planungsprozess relevanten Informationen sowie in ihrer Aufbereitung und Integration in eine digitale Planungsumgebung. Das Bestreben des Forschungsprojektes ist es, Grundlagen f{\"u}r digitale Werkzeuge zu entwickeln die zu plausiblen L{\"o}sungen im Planungsprozess und somit zu erh{\"o}hter Planungssicherheit f{\"u}r die am Bau beteiligten Auftragnehmer und Auftraggeber f{\"u}hren. Es wird angestrebt Programm-Module zu entwickeln, die den Planer bei der Ermittlung von L{\"o}sungswegen zu einer Fachfrage inhaltlich unterst{\"u}tzen und die Nachvollziehbarkeit und Richtigkeit einer Planungsentscheidung gew{\"a}hrleisten und plausibel darlegen. Mit Hilfe der Module sollen Entscheidungsfindungen katalysiert werden. Die Bauvorhaben der Zukunft werden zu einem großen Teil im Bestand liegen. Dieses Faktum erfordert planerische Maßnahmen, f{\"u}r die vollends Werkzeuge und Hilfsmittel fehlen, die zu plausiblen und sicheren Planungsentscheidungen f{\"u}hren. Die Entwicklung solcher Hilfsmittel ist Ziel dieser Forschung. Der Beitrag stellt prototypische Software-Module vor, die sich mit der Problematik der potenziellen Bebaubarkeit einer Grundst{\"u}cksfl{\"a}che auseinander setzen. Die Module verarbeiten Regeln, die den einschl{\"a}gigen Normen und Verordnungen entnommen sind, die bei der Erarbeitung einer Planungsl{\"o}sung eingehalten werden m{\"u}ssen.}, subject = {Bauplanung}, language = {de} } @inproceedings{LepeniesRichterZastrau2003, author = {Lepenies, Ingolf and Richter, Mike and Zastrau, Bernd W.}, title = {Numerische Simulation des mechanischen Verhaltens von Textilbeton unter Ber{\"u}cksichtigung mehrerer Strukturebenen}, doi = {10.25643/bauhaus-universitaet.328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3281}, year = {2003}, abstract = {The failure mechanisms of textile reinforced concrete (TRC), which is a composite of bundles of long fibers and fine concrete, are complex. Most important for the ductility is the successive debonding of the fibers from the surrounding matrix when the brittle matrix is cracking. Therefore, one of the main issues is the simulation of the bond behavior between the reinforcement and the matrix. By introducing a hierarchical material model for TRC the mechanical behavior is simulated by means of representative volume elements modelled on the meso scale. Finite element analysis is used to determine the effective properties of TRC within a periodic homogenization framework. Further, a multiscale finite element technique is suggested, where constitutive equation are formulated only on the meso level.}, subject = {Beton}, language = {en} } @inproceedings{LaemmerMeissnerRuben2003, author = {L{\"a}mmer, Lutz and Meißner, Udo F. and Ruben, Jochen}, title = {Modellierung von Baugrund-Tragwerk-Systemen f{\"u}r die parallele numerische Simulation unter Ber{\"u}cksichtigung dynamischer Aspekte}, doi = {10.25643/bauhaus-universitaet.327}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3276}, year = {2003}, abstract = {Bei der Gr{\"u}ndung von schweren Bauwerken (z.B. Hochh{\"a}usern auf Gr{\"u}ndungsplatten und pf{\"a}hlen) wird der Lastabtrag in den Baugrund durch eine starke Interaktion zwischen Bauwerk und Baugrund bestimmt. Der Baugrund kann ph{\"a}nomenologisch als Mehrphasenkontinuum beschrieben werden, bei dem die Phasen Feststoff, Fl{\"u}ssigkeit und Gas in mechanische Wechselwirkung treten. Die Wechselwirkung zwischen der Deformation des Feststoffes und der Str{\"o}mung des Porenwassers spielt unter der Lasteinwirkung des Bauwerks und unter dynamischer Erregung eine zentrale Rolle. Bei komplexen Gr{\"u}ndungsverh{\"a}ltnissen k{\"o}nnen die Deformations- und Spannungszust{\"a}nde realit{\"a}tsnah nur durch dreidimensionale Modelle erfasst werden. Je nach Baufortschritt stellen sich die Probleme dabei unterschiedlich dar. Der vorliegende Beitrag besch{\"a}ftigt sich mit der f{\"u}r die mit der Simulation mit der Methode der finiten Elemente notwendigen Modellierung und der rechnergest{\"u}tzten Netzgenerierung f{\"u}r die Baugrund-Tragwerk-Strukturen. Bei komplexen dreidimensionalen Gr{\"u}ndungskonstruktionen ist eine solche rechnergest{\"u}tzte Diskretisierung mit finiten Elementen zweckm{\"a}ßig, die das geotechnische System und dessen Randbedingungen und Lasten umfassend beschreiben und verwalten kann. Daf{\"u}r werden geeignete Software-Werkzeuge vorgestellt, mit denen sich dreidimensionale, zeitabh{\"a}ngige Systeme modellieren und diskretisieren lassen. Die Kontaktproblematik zwischen Baugrund und Tragwerk und die Besonderheiten des Mehrphasenkontinuums stellen besondere Anspr{\"u}che an die Diskretisierung. Zudem werden Methoden vorgestellt, die das akkumulierte Gr{\"u}ndungsmodell, das sich {\"u}ber den Bauablauf ergibt, verwalten und die verschiedenen Bauzust{\"a}nde in einem dynamischen Modell bereitstellen.}, subject = {Boden-Bauwerk-Wechselwirkung}, language = {de} } @inproceedings{HuebnerWalhornKoelke2003, author = {H{\"u}bner, Bj{\"o}rn and Walhorn, Elmar and K{\"o}lke, Andreas}, title = {Simultane L{\"o}sung gekoppelter Struktur-Fluid-Systeme}, doi = {10.25643/bauhaus-universitaet.311}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3114}, year = {2003}, abstract = {Ein simultanes L{\"o}sungsverfahren f{\"u}r Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizit{\"a}tstheorie in total Lagrangescher Formulierung. Die Str{\"o}mung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberfl{\"a}chen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode f{\"u}hrt zu einem konsistenten Berechnungsmodell f{\"u}r das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung {\"a}ndern k{\"o}nnen, erlaubt die Methode eine nat{\"u}rliche Beschreibung des infolge der Strukturbewegung zeitver{\"a}nderlichen Str{\"o}mungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten f{\"u}r die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgew{\"a}hlte Anwendungsbeispiele zeigen die Leistungsf{\"a}higkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen L{\"o}sungsverfahrens.}, subject = {Bauwerk}, language = {de} } @inproceedings{HubeWittwer2003, author = {Hube, Werner and Wittwer, Christof}, title = {Pr{\"a}diktive W{\"a}rmeflussregelung solaroptimierter Wohngeb{\"a}ude - Thermische Simulation komplexer Geb{\"a}ude}, doi = {10.25643/bauhaus-universitaet.310}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3106}, year = {2003}, abstract = {Moderne Wohngeb{\"a}ude heute, besonders aber die der Zukunft, werden sich zu einem großen Teil selbst mit W{\"a}rme versorgen. Hierbei spielen Entwicklungen im Bereich der Fassadenkonstruktionen eine zentrale Rolle. Zum erh{\"o}hten solaren W{\"a}rmeeintrag kommen die Eigenschaften der W{\"a}rmespeicherung und verz{\"o}gerten W{\"a}rmeabgabe hinzu. Aufgrund dieser Eigenschaften definiert sich das Geb{\"a}udeverhalten neu und komplexer. Im Rahmen der Entwicklungen von W{\"a}rmeflussregelungen in solarthermisch beheizten Wohngeb{\"a}uden mit neuartigen Fassaden wird in diesem Beitrag auf die Modellentwicklung moderner Fassadenkonstruktionen hinsichtlich Transparenter W{\"a}rmed{\"a}mmung und Phasenwechselmaterialien im Wandverbund, kombiniert mit der regelungstechnisch interessanten Neuentwicklung von Verschattungseinrichtungen {\"u}ber schaltbare Schichten am Fenster, eingegangen. Der Beitrag beschreibt den Entwurf eines Regelungskonzeptes f{\"u}r die thermische Raumklimaregelung. Diese Untersuchungen basieren auf komplexen Simulationsmodellen, wobei bei der Modellentwicklung der neuartigen Fassadenelemente auf reale Messwerte zur{\"u}ckgegriffen werden konnte.}, subject = {Haus}, language = {de} } @inproceedings{HahnWeitzmann2003, author = {Hahn, Stephan and Weitzmann, R{\"u}diger}, title = {Nichtlineare Analyse von hybriden Konstruktionen unter Verwendung von selektiv gekoppelten Tragwerks- und Querschnittsmodellen}, doi = {10.25643/bauhaus-universitaet.302}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3026}, year = {2003}, abstract = {Bei der Untersuchung hybrider Strukturen kann eine Kopplung von Modellen unterschiedlicher Modellebenen vorteilhaft sein. Durch selektive Kopplung von Tragwerks- und Querschnittsmodellen in ausgew{\"a}hlten Bereichen der Konstruktion kann z.B. eine Verbesserung der Abbildungsgenauigkeit erzielt werden. Dadurch werden erweiterte Aussagen {\"u}ber das Querschnittstragverhalten in extrem beanspruchten Teilen des Tragwerks bei optionaler Skalierbarkeit des Modellumfangs m{\"o}glich. Im Beitrag werden ausgew{\"a}hlte Varianten der Modellbildung gegen{\"u}bergestellt und bewertet. Hierbei werden Aspekte der physikalischen Nichtlinearit{\"a}t von hybriden Konstruktionen insbesondere von Stahlbetonkonstruktionen ber{\"u}cksichtigt. Die Einbeziehung von Verfahren der mathematischen Optimierung in die Berechnungsstrategie erm{\"o}glicht die L{\"o}sung der zugrunde liegenden nichtlinearen Problemstellungen unter Vorgabe von Bemessungszielen und unter Beachtung von Grenzzustandsbedingungen.}, subject = {Tragwerk}, language = {de} } @inproceedings{BaranskiBoron2003, author = {Baranski, Jacek and Boron, Jacek}, title = {Computer Modeling of the Joints for WGP Construction Systems}, doi = {10.25643/bauhaus-universitaet.293}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2935}, year = {2003}, abstract = {Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used.}, subject = {Geb{\"a}ude}, language = {en} } @inproceedings{GrigrievaLymarenko2003, author = {Grigrieva, Polina and Lymarenko, Yulia}, title = {Mathematical modeling of nonlinear effects for vibrodiagnostics of fatigue cracks}, doi = {10.25643/bauhaus-universitaet.291}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2917}, year = {2003}, abstract = {The vibration control of complicated mechanical structures is impossible without proper mathematical models that allow to have a true apprehension of events occurring in structural member before the starting of the experiment and correct the diagnostic experiment in case of need. An approach that implies using of a discrete model reflecting all required features of a prototype system and permitting of an effective analytical and numerical investigation is proposed in the work. At first a discrete model of a bladed disk with flaw is considered. Taking into account the symmetry of the structure by utilization of mathematical tools of group presentation theory the number of degrees of freedom of the system is diminished. Small damage of the disk is regarded as perturbation of structure symmetry. The distinction of vibration characteristics such as natural frequencies and mode shapes of damaged and undamaged systems is determined theoretically with the help of perturbation theory and can be used as an effective diagnostic criterion of a small-scale damage of the structure. In the second part of the work a non-linear two-mass model of an acoustic emission in a damaged structure is proposed. On basis of the numerical integration of the nonlinear differential equations and expansion of the derived solution into a Fourier series free and forced vibrations of the model are investigated. It is shown that proposed model reflects all characteristic properties of vibrations of damaged structures: reduction of natural frequency, sub- and super-resonances, acoustic effects.}, subject = {Nichtlineare Mechanik}, language = {en} } @inproceedings{Gasser2003, author = {Gasser, Ingenuin}, title = {On A New One-Dimensional Model to Describe Tunnel Fires}, doi = {10.25643/bauhaus-universitaet.288}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2889}, year = {2003}, abstract = {We present a model derived to describe tunnel fires. The model originates in a compressible description of the air in the tunnel. It takes into account the strong buoyancy forces and at the same time the small Mach-number of the airflow. We comment on the derivation, on analytical results and on numerical simulations of the model. The model has been validated using data from real tunnel fire experiments. It shows good agreement with the real situation.}, subject = {Tunnel}, language = {en} } @article{Fink2004, author = {Fink, Thomas}, title = {Structural analysis, design and detailing using standard CAD software and standard building information model}, doi = {10.25643/bauhaus-universitaet.270}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2702}, year = {2004}, abstract = {This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models.}, subject = {Bauindustrie}, language = {en} } @article{KiviniemiFischer2004, author = {Kiviniemi, Arto and Fischer, Martin}, title = {Requirements Management Interface to Building Product Models}, doi = {10.25643/bauhaus-universitaet.242}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2427}, year = {2004}, abstract = {In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...}, subject = {Produktmodell}, language = {en} } @article{StaubFrench2004, author = {Staub-French, Sheryl}, title = {Feature-based Product Modeling for Building Construction}, doi = {10.25643/bauhaus-universitaet.233}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2331}, year = {2004}, abstract = {Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective.}, subject = {Produktmodell}, language = {en} } @inproceedings{HauschildBorrmannHuebler2004, author = {Hauschild, Thomas and Borrmann, Andr{\´e} and H{\"u}bler, Reinhard}, title = {Integration of Constraints into Digital Building Models for Cooperative Planning Processes}, doi = {10.25643/bauhaus-universitaet.177}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1775}, year = {2004}, abstract = {The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given.}, subject = {Architektur}, language = {en} } @inproceedings{AldaCremersBilek2004, author = {Alda, Sascha and Cremers, Armin B. and Bilek, Jochen}, title = {Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures}, doi = {10.25643/bauhaus-universitaet.148}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1481}, year = {2004}, abstract = {Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent-peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{LehnerHartmann2004, author = {Lehner, Karlheinz and Hartmann, Dietrich}, title = {Scenarios for the deployment of distributed engineering applications}, doi = {10.25643/bauhaus-universitaet.147}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1476}, year = {2004}, abstract = {Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{MundaniBungartz2004, author = {Mundani, Ralf-Peter and Bungartz, Hans-Joachim}, title = {Octrees for Cooperative Work in a Network-Based Environment}, doi = {10.25643/bauhaus-universitaet.146}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1460}, year = {2004}, abstract = {Assuring global consistency in a cooperative working environment is the main focus of many nowaday research projects in the field of civil engineering and others. In this paper, a new approach based on octrees will be discussed. It will be shown that by the usage of octrees not only the management and control of processes in a network-based working environment can be optimised but also an efficient integration platform for processes from various disciplines - such as architecture and civil engineering - can be provided. By means of an octree-based collision detection resp. consistency assurance a client-server-architecture will be described as well as sophisticated information services for a further support of cooperative work.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{vanRooyenOlivier2004, author = {van Rooyen, G.C. and Olivier, A. H.}, title = {Notes on structural analysis in a distributed collaboratory}, doi = {10.25643/bauhaus-universitaet.145}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1451}, year = {2004}, abstract = {The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{MeissnerRueppelTheiss2004, author = {Meißner, Udo F. and Rueppel, Uwe and Theiss, Mirko}, title = {Network-Based Fire Engineering Supported by Agents}, doi = {10.25643/bauhaus-universitaet.144}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1447}, year = {2004}, abstract = {Building design in Civil Engineering is characterized by the cooperation of experts in multiple disciplines. Close cooperation of engineers in different fields is the basis of high product quality, short development periods and a minimum of investment costs. For each building the engineers have to create a new fire engineering model. The consistent realization of the fire engineering model in all details has high demands on communication, collaboration and building models. Thereby, to preserve the related design models consistent to each other and compatible with the rules of fire engineering is a complex task. In addition, regulations and guidelines vary according to the building location, so the knowledge base must be integrated dynamically into the planning process. This contribution covers the integration of engineers and design models into a cooperation network on the basis of mobile agents. The distributed models of architectural design, structural planning and fire engineering are supported. These models are implemented as XML-based models which can be accessed by mobile agents for information retrieval and for processing tasks. Agents are provided to all planners, they are enabled to check up the distributed design models with the knowledge base of the fire protection regulations,. With the use of such an agent each planner is supported to check up his planning for accordance with the fire protection requirements. The fire-engineering-agent analyzes the design and detects inconsistencies by processing fire protection requirements and design model facts in a rule-based expert system. The possibility to check the planning information at an early state in the sense of compatibility to the fire protection regulations enables a comprehensive diagnosis of the design and the reduction of planning errors.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{SchleyMejstrikHolz2004, author = {Schley, Frank and Mejstrik, Marcus and Holz, K.-Peter}, title = {Network Based Co-operation Platform for Geotechnical Engineering}, doi = {10.25643/bauhaus-universitaet.143}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1431}, year = {2004}, abstract = {This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{EslimyIsfahanyPegels2004, author = {Eslimy-Isfahany, S. H. R. and Pegels, Georg}, title = {Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran}, doi = {10.25643/bauhaus-universitaet.142}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1421}, year = {2004}, abstract = {The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{HartmannMeissnerRueppel2004, author = {Hartmann, Dietrich and Meißner, Udo F. and Rueppel, Uwe}, title = {Integration of Productmodel Databases into Multi-Agent Systems}, doi = {10.25643/bauhaus-universitaet.141}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1410}, year = {2004}, abstract = {This paper deals with two different agent-based approaches aimed at the incorporation of complex design information into multi-agent planning systems. The first system facilitates collaborative structural design processes, the second one supports fire engineering in buildings. Both approaches are part of two different research projects that belong to the DFG1 priority program 1103 entitled "Network-based Co-operative Planning Processes in Structural Engineering" (DFG 2000). The two approaches provide similar database wrapper agents to integrate relevant design information into two multi-agent systems: Database wrapper agents make the relevant product model data usable for further agents in the multi-agent system, independent on their physical location. Thus, database wrapper agents act as an interface between multi-agent system and heterogeneous database systems. The communication between the database wrapper agents and other requesting agents presumes a common vocabulary: a specific database ontology that maps database related message contents into database objects. Hereby, the software-wrapping technology enables the various design experts to plug in existing database systems and data resources into a specific multi-agent system easily. As a consequence, dynamic changes in the design information of large collaborative engineering projects are adequately supported. The flexible architecture of the database wrapper agent concept is demonstrated by the integration of an XML and a relational database system.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{GebbekenBaumhauerIonita2004, author = {Gebbeken, Norbert and Baumhauer, Andreas and Ionita, Mihai}, title = {Increasing the Reliability and Performance through Automatization and Parallel Working}, doi = {10.25643/bauhaus-universitaet.139}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1397}, year = {2004}, abstract = {Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{Hartmann2004, author = {Hartmann, Ulrich C.}, title = {Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator}, doi = {10.25643/bauhaus-universitaet.138}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1386}, year = {2004}, abstract = {A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{LaehrBletzinger2004, author = {L{\"a}hr, Andr{\´e} and Bletzinger, Kai-Uwe}, title = {Design of an Analysis Environment for Planning Decision Support}, doi = {10.25643/bauhaus-universitaet.1370}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1370}, year = {2004}, abstract = {In this contribution, the design of an analysis environment is presented, that supports an analyst to come to a decision within a gradual collaborative planning process. An analyst represents a project manager, planner or any other person, involved in the planning process. Today, planning processes are managed by several geographically distributed planners and project managers. Thus, complexity of such a process rises even more. Prediction of consequences of many planning decisions is not possible, in particular since assessment of a planning advance is not trivial. There have to be considered several viewpoints, that depend on individual perceptions. In the following, methods are presented to realize planning decision support.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{MilesJoitaBurnap2004, author = {Miles, John and Joita, Liviu and Burnap, Peter}, title = {Collaborative Engineering: Virtual Teams in a Grid Environment Supporting Consortia in the Construction Industry}, doi = {10.25643/bauhaus-universitaet.136}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1362}, year = {2004}, abstract = {In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI).}, subject = {Ingenieurbau}, language = {en} } @inproceedings{Olivier2004, author = {Olivier, A. H.}, title = {An application-centred framework for distributed engineering applications}, doi = {10.25643/bauhaus-universitaet.135}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1353}, year = {2004}, abstract = {The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{YahiaouiHensenSoethout2004, author = {Yahiaoui, Azzedine and Hensen, Jan and Soethout, Luc}, title = {Developing CORBA-based distributed control and building performance environments by run-time coupling}, doi = {10.25643/bauhaus-universitaet.134}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1347}, year = {2004}, abstract = {Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{RueppelMeissnerGreb2004, author = {Rueppel, Uwe and Meißner, Udo F. and Greb, Steffen}, title = {A Petri Net based Method for Distributed Process Modelling in Structural Engineering}, doi = {10.25643/bauhaus-universitaet.133}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1338}, year = {2004}, abstract = {The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes.}, subject = {Ingenieurbau}, language = {en} } @inproceedings{BoukampAkinci2004, author = {Boukamp, Frank and Akinci, Burcu}, title = {Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications}, doi = {10.25643/bauhaus-universitaet.131}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1315}, year = {2004}, abstract = {This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system.}, subject = {Bauwerk}, language = {en} } @inproceedings{Weitzmann2003, author = {Weitzmann, R{\"u}diger}, title = {Limit state design of hybrid structures with meshless methods using mathematical optimization}, doi = {10.25643/bauhaus-universitaet.6}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-67}, year = {2003}, abstract = {The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization.}, subject = {Geb{\"a}ude}, language = {de} }