@inproceedings{Szolomicki,
  author    = {Szolomicki, Jerzy Pawel},
  title     = {STRUCTURAL BEHAVIOUR OF MASONRY VAULTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2896},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28966},
  pages     = {11},
  abstract  = {This paper deals with the modelling and the analysis of masonry vaults. Numerical FEM analyses are performed using LUSAS code. Two vault typologies are analysed (barrel and cross-ribbed vaults) parametrically varying geometrical proportions and constraints. The proposed model and the developed numerical procedure are implemented in a computer analysis. Numerical applications are developed to assess the model effectiveness and the efficiency of the numerical procedure. The main object of the present paper is the development of a computational procedure which allows to define 3D structural behaviour of masonry vaults. For each investigated example, the homogenized limit analysis approach has been employed to predict ultimate load and failure mechanisms. Finally, both a mesh dependence study and a sensitivity analysis are reported. Sensitivity analysis is conducted varying in a wide range mortar tensile strength and mortar friction angle with the aim of investigating the influence of the mechanical properties of joints on collapse load and failure mechanisms. The proposed computer model is validated by a comparison with experimental results available in the literature.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{GutierrezSRamirezRodriguezetal.,
  author    = {Gutierrez S, Andrei and Ramirez, Marco P. and Rodriguez, Octavio and Sanchez N., V.D.},
  title     = {ON THE SOLUTIONS OF ELECTRICAL IMPEDANCE EQUATION: A PSEUDOANALYTIC APPROACH FOR SEPARABLE-VARIABLES CONDUCTIVITY FUNCTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2847},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28478},
  pages     = {11},
  abstract  = {Using a quaternionic reformulation of the electrical impedance equation, we consider a two-dimensional separable-variables conductivity function and, posing two different techniques, we obtain a special class of Vekua equation, whose general solution can be approach by virtue of Taylor series in formal powers, for which is possible to introduce an explicit Bers generating sequence.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{LavickaDelangheSoucek,
  author    = {Lavicka, Roman and Delanghe, Richard and Soucek, Vladimir},
  title     = {THE HOWE DUALITY FOR HODGE SYSTEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2866},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28669},
  pages     = {11},
  abstract  = {In this note, we describe quite explicitly the Howe duality for Hodge systems and connect it with the well-known facts of harmonic analysis and Clifford analysis. In Section 2, we recall briefly the Fisher decomposition and the Howe duality for harmonic analysis. In Section 3, the well-known fact that Clifford analysis is a real refinement of harmonic analysis is illustrated by the Fisher decomposition and the Howe duality for the space of spinor-valued polynomials in the Euclidean space under the so-called L-action. On the other hand, for Clifford algebra valued polynomials, we can consider another action, called in Clifford analysis the H-action. In the last section, we recall the Fisher decomposition for the H-action obtained recently. As in Clifford analysis the prominent role plays the Dirac equation in this case the basic set of equations is formed by the Hodge system. Moreover, analysis of Hodge systems can be viewed even as a refinement of Clifford analysis. In this note, we describe the Howe duality for the H-action. In particular, in Proposition 1, we recognize the Howe dual partner of the orthogonal group O(m) in this case as the Lie superalgebra sl(2 1). Furthermore, Theorem 2 gives the corresponding multiplicity free decomposition with an explicit description of irreducible pieces.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{LeRueppel,
  author    = {Le, Hanh Quang and R{\"u}ppel, Uwe},
  title     = {MULTI-SITE CONSTRUCTION PROJECT SCHEDULING CONSIDERING RESOURCE MOVING TIME IN DEVELOPING COUNTRIES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2867},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28671},
  pages     = {15},
  abstract  = {Under the booming construction demands in developing countries, particularly in Vietnam situation, construction contractors often perform multiple concurrent projects in different places. In construction project scheduling processes, the existing scheduling methods often assume the resource moving time between activities/projects to be negligible. When multiple projects are deployed in different places and far from each other, this assumption has many shortcomings for properly modelling the real-world constraints. Especially, with respect to developing countries such as the Vietnam which contains transportation systems that are still in backward and low technical standards. This paper proposes a new algorithm named Multi-Site Construction Project Scheduling - MCOPS. The objective of this algorithm is to solve the problem of minimising multi-site construction project duration under limited available conditions of renewable resources (labour, machines and equipment) combining with the moving time of required resource among activities/projects. Additionally, in order to mitigate the impact of resource moving time into the multi-site project duration, this paper proposed a new priority rule: Minimum Resource Moving Time (MinRMT). The MinRMT is applied to rank the finished activities according to a priority order, to support the released resources to the scheduling activities. In order to investigate the impact of the resource moving time among activities during the scheduling process, computational experimentation was implemented. The results of the MCOPS-based computational experiments showed that, the resource moving time among projects has significantly impacted the multi-site project durations and this amount of time can not be ignored in the multi-site project scheduling process. Besides, the efficient application of the MinRMT is also demonstrated through the achieved results of the computational experiment in this paper. Though the efforts in this paper are based on the Vietnamese construction conditions, the proposed method can be usefully applied in other developing countries which have similar construction conditions.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{UbyszMajStachonetal.,
  author    = {Ubysz, Andrzej and Maj, Marek and Stachon, T. and Rogoza, Agnieszka},
  title     = {NUMERICAL ANALYSIS OF STRESS DISTRIBUTION IN THE REINFORCED CONCRETE SUPPORT BEAM BRACKET EXPOSED TO DAMAGE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2869},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28693},
  pages     = {11},
  abstract  = {The article presents analysis of stress distribution in the reinforced concrete support beam bracket which is a component of prefabricated reinforced concrete building. The building structure is spatial frame where dilatations were applied. The proper stiffness of its structure is provided by frames with stiff joints, monolithic lift shifts and staircases. The prefabricated slab floors are supported by beam shelves which are shaped as inverted letter 'T'. Beams are supported by the column brackets. In order to lower the storey height and fulfill the architectural demands at the same time, the designer lowered the height of beam at the support zone. The analyzed case refers to the bracket zone where the slant crack. on the support beam bracket was observed. It could appear as a result of overcrossing of allowable tension stresses in reinforced concrete, in the bracket zone. It should be noted that the construction solution applied, i.e. concurrent support of the "undercut" beam on the column bracket causes local concentration of stresses in the undercut zone where the strongest transverse forces and tangent stresses occur concurrently. Some additional rectangular stresses being a result of placing the slab floors on the lower part of beam shelves sum up with those described above.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BrackxDeSchepperLunaElizararrasetal.,
  author    = {Brackx, Fred and De Schepper, Hennie and Luna-Elizararras, Maria Elena and Shapiro, Michael},
  title     = {INTEGRAL REPRESENTATIONS IN HERMITEAN CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2832},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28326},
  pages     = {13},
  abstract  = {Euclidean Clifford analysis is a higher dimensional function theory offering a refinement of classical harmonic analysis. The theory is centered around the concept of monogenic functions, i.e. null solutions of a first order vector valued rotation invariant differential operator called the Dirac operator, which factorizes the Laplacian. More recently, Hermitean Clifford analysis has emerged as a new and successful branch of Clifford analysis, offering yet a refinement of the Euclidean case; it focusses on the simultaneous null solutions, called Hermitean (or h-) monogenic functions, of two Hermitean Dirac operators which are invariant under the action of the unitary group. In Euclidean Clifford analysis, the Clifford-Cauchy integral formula has proven to be a corner stone of the function theory, as is the case for the traditional Cauchy formula for holomorphic functions in the complex plane. Previously, a Hermitean Clifford-Cauchy integral formula has been established by means of a matrix approach. This formula reduces to the traditional Martinelli-Bochner formula for holomorphic functions of several complex variables when taking functions with values in an appropriate part of complex spinor space. This means that the theory of Hermitean monogenic functions should encompass also other results of several variable complex analysis as special cases. At present we will elaborate further on the obtained results and refine them, considering fundamental solutions, Borel-Pompeiu representations and the Teoderescu inversion, each of them being developed at different levels, including the global level, handling vector variables, vector differential operators and the Clifford geometric product as well as the blade level were variables and differential operators act by means of the dot and wedge products. A rich world of results reveals itself, indeed including well-known formulae from the theory of several complex variables.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{RichterIlzigRudnicki,
  author    = {Richter, Matthias and Ilzig, Katrin and Rudnicki, Andrzej},
  title     = {MODELS FOR THE BUS HEADWAY DISTRIBUTION IN THE FLOW BEHIND A TRAFFIC SIGNAL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2852},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28521},
  pages     = {17},
  abstract  = {Several results concerning the distribution of the headway of busses in the flow behind a traffic signal are presented. In the main focus of interest is the description of analytical models, which are verified by the results of Monte-Carlo-Methods. The advantage of analytical models (verified, but not derived by simulation methods) is their flexibility with respect to possible generalizations. For instance, several random distributions of the flow incoming to the traffic signal can be compared. The attention will be directed at the question, how the primary headway H (analyzed in front of the traffic signal) is mapped to the headway H' analyzed behind of the traffic signal and how the random distribution of H is mapped to that of H'. For the traffic flow in front of the traffic signal several models will be discussed. The first case considers the situation, that busses operate on a common lane with the individual motor car traffic and the traffic flow is saturated. In the second situation, busses operate on a separated bus lane. Moreover, a mixed situation is discussed to model as close to reality as possible.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Siekierski,
  author    = {Siekierski, Wojciech},
  title     = {CRITICAL STRESS ASSESSMENT IN ANGLE TO GUSSET PLATE BOLTED CONNECTION BY SIMPLIFIED FEM MODELLING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2889},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28897},
  pages     = {8},
  abstract  = {Simplified modelling of friction grip bolted connections of steel member - to - gusset plate is often applied in engineering practise. The paper deals with the simplification of pre-tensioned bolt model and simplification of load transfer within connection. Influence on normal strain (and thus stress) distribution at critical cross-section is investigated. Laboratory testing of single-angle or double-angle members - to - gusset plates bolted connections were taken as basis for numerical analysis. FE models were created using 1D and 2D elements. Angles and gusset plates were modelled with shell elements. Two methods of modelling of friction grip bolting were considered: bolt-regarding approach with 1D element systems modelling bolts and two variants of bolt-disregarding approach with special constraints over some part of member and gusset plate surfaces in contact: a) constraints over whole area of contact, b) constraints over the area around each bolt shank ("partially tied"). Modelling of friction grip bolted connections using simplified bolt modelling may be effective, especially in the case of analysis concerning elastic range only. In such a case disregarding bolts and replacing them with "partially tied" modelling seems to be more attractive. It is less time-consuming and provides results of similar accuracy in comparison to analysis utilizing simplified bolt modelling.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{CastilloPerez,
  author    = {Castillo-P{\´e}rez, Ra{\´u}l},
  title     = {AN APPLICATION OF FORMAL POWER SERIES FOR THE DEVELOPMENT OF OPTICAL FILTERS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2835},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28354},
  pages     = {8},
  abstract  = {The application of a recent method using formal power series is proposed. It is based on a new representation for solutions of Sturm-Liouville equations. This method is used to calculate the transmittance and reflectance coefficients of finite inhomogeneous layers with high accuracy and efficiency. Tailoring the refraction index profile defining the inhomogeneous media it is possible to develop very important applications such as optical filters. A number of profiles were evaluated and then some of them selected in order to perform an improvement of their characteristics via the modification of their profiles.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{ChudobaScholzenHegger,
  author    = {Chudoba, Rostislav and Scholzen, A. and Hegger, Josef},
  title     = {MICROPLANE MODEL WITH INITIAL AND DAMAGE-INDUCED ANISOTROPY APPLIED TO TEXTILE-REINFORCED CONCRETE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2836},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28367},
  pages     = {8},
  abstract  = {The presented material model reproduces the anisotropic characteristics of textile reinforced concrete in a smeared manner. This includes both the initial anisotropy introduced by the textile reinforcement, as well as the anisotropic damage evolution reflecting fine patterns of crack bridges. The model is based on the microplane approach. The direction-dependent representation of the material structure into oriented microplanes provides a flexible way to introduce the initial anisotropy. The microplanes oriented in a yarn direction are associated with modified damage laws that reflect the tension-stiffening effect due to the multiple cracking of the matrix along the yarn.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{HuhntRichter,
  author    = {Huhnt, Wolfgang and Richter, Sven},
  title     = {Modification Management for Planning and Construction Processes},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2851},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28510},
  pages     = {13},
  abstract  = {Planning and construction processes are characterized by the peculiarity that they need to be designed individually for each project. It is necessary to set up an individual schedule for each project. As a basis for a new project, schedules from already finished projects are used, but adaptions are always necessary. In practice, scheduling tools only document a process. Schedules cover a set of activities, their duration and a set of interdependencies between activities. The design of a process is up to the user. It is not necessary to specify each interdependency, and completeness and correctness need to be checked manually. No methodologies are available to guarantee properties such as correctness or completeness. The considerations presented in the paper are based on an approach where a planning and a construction process including the interdependencies between planning and construction activities are regarded as a result. Selected information need to be specified by a user, and a proposal for an order of planning and construction activities is computed. As a consequence, process properties such as correctness and completeness can be guaranteed with respect to user input. Especially in Germany, clients are allowed to modify their requirements at any time. This leads to modifications in the planning and construction processes. This paper covers a mathematical formulation for this problem based on set theory. A complex structure is set up covering objects and relations; and operations are defined that guarantee consistency in the underlying and versioned process description. The presented considerations are based on previous work. This paper can be regarded as the next step in a series of previous work describing how a suitable concept for handling, planning and construction processes in civil engineering can be formed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SharmakScherer,
  author    = {Sharmak, Wael and Scherer, Raimar J.},
  title     = {ADAPTABLE PROJECT MANAGEMENT PLANS USING CHANGE TEMPLATES-BASED APPROACH},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2888},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28886},
  pages     = {14},
  abstract  = {The uncertainty existing in the construction industry is bigger than in other industries. Consequently, most construction projects do not go totally as planned. The project management plan needs therefore to be adapted repeatedly within the project lifecycle to suit the actual project conditions. Generally, the risks of change in the project management plan are difficult to be identified in advance, especially if these risks are caused by unexpected events such as human errors or changes in the client preferences. The knowledge acquired from different resources is essential to identify the probable deviations as well as to find proper solutions to the faced change risks. Hence, it is necessary to have a knowledge base that contains known solutions for the common exceptional cases that may cause changes in each construction domain. The ongoing research work presented in this paper uses the process modeling technique of Event-driven Process Chains to describe different patterns of structure changes in the schedule networks. This results in several so called "change templates". Under each template different types of change risk/ response pairs can be categorized and stored in a knowledge base. This knowledge base is described as an ontology model populated with reference construction process data. The implementation of the developed approach can be seen as an iterative scheduling cycle that will be repeated within the project lifecycle as new change risks surface. This can help to check the availability of ready solutions in the knowledge base for the situation at hand. Moreover, if the solution is adopted, CPSP, "Change Project Schedule Plan „a prototype developed for the purpose of this research work, will be used to make the needed structure changes of the schedule network automatically based on the change template. What-If scenarios can be implemented using the CPSP prototype in the planning phase to study the effect of specific situations without endangering the success of the project objectives. Hence, better designed and more maintainable project schedules can be achieved.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{ZeiserDahmenRohwedderetal.,
  author    = {Zeiser, Andreas and Dahmen, W. and Rohwedder, T. and Schneider, R.},
  title     = {ADAPTIVE EIGENVALUE COMPUTATION FOR ELLIPTIC OPERATORS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2904},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29042},
  pages     = {14},
  abstract  = {We present recent developments of adaptive wavelet solvers for elliptic eigenvalue problems. We describe the underlying abstract iteration scheme of the preconditioned perturbed iteration. We apply the iteration to a simple model problem in order to identify the main ideas which a numerical realization of the abstract scheme is based upon. This indicates how these concepts carry over to wavelet discretizations. Finally we present numerical results for the Poisson eigenvalue problem on an L-shaped domain.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{RueppelAbolghasemzadeh,
  author    = {R{\"u}ppel, Uwe and Abolghasemzadeh, Puyan},
  title     = {BIM-BASED IMMERSIVE EVACUATION SIMULATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2884},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28845},
  pages     = {9},
  abstract  = {The changed global security situation in the last eight years has shown the importance of emergency management plans in public buildings. Therefore, the use of computer simulators for surveying fire safety design and evacuation process is increasing. The aim of these simulators is to have more realistic evacuation simulations. The challenge is, firstly, to realize the virtual simulation environment based on geometrical and material boundary conditions, secondly, to considerate the mutual interaction effects between different parameters and, finally, to have a realistic visualization of the simulated results. In order to carry out this task, an especial new software method on a BIM-platform has to be developed which can integrate all required simulations and will be able to have an immersive output BIM ISEE (Immersive Safety Engineering Environment). The new BIM-ISEE will integrate the Fire Dynamics Simulator (FDS) for fire and evacuation simulation in the Autodesk Revit which is a BIM-platform and will represent the simulation results in the immersive virtual environment at the institute (CES-Lab). With BIM-ISEE the fire safety engineer will be able to obtain more realistic visualizations in the immersive environment, to modify his concept more effectively, to evaluate the simulation results more accurately and to visualize the various simulation results. It can also give the rescue staff the opportunity to perform and evaluate emergency evacuation trainings.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{StackManzoorMenzeletal.,
  author    = {Stack, Paul and Manzoor, Farhan and Menzel, Karsten and Cahill, Brian},
  title     = {A SERVICE ORIENTED ARCHITECTURE FOR BUILDING PERFORMANCE MONITORING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2893},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28935},
  pages     = {18},
  abstract  = {Information technology plays a key role in the everyday operation of buildings and campuses. Many proprietary technologies and methodologies can assist in effective Building Performance Monitoring (BPM) and efficient managing of building resources. The integration of related tools like energy simulator packages, facility, energy and building management systems, and enterprise resource planning systems is of benefit to BPM. However, the complexity to integrating such domain specific systems prevents their common usage. Service Oriented Architecture (SOA) has been deployed successfully in many large multinational companies to create integrated and flexible software systems, but so far this methodology has not been applied broadly to the field of BPM. This paper envisions that SOA provides an effective integration framework for BPM. Service oriented architecture for the ITOBO framework for sustainable and optimised building operation is proposed and an implementation for a building performance monitoring system is introduced.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SmarslyHartmann,
  author    = {Smarsly, Kay and Hartmann, Dietrich},
  title     = {REAL-TIME MONITORING OF WIND CONVERTERS BASED ON SOFTWARE AGENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2891},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28916},
  pages     = {11},
  abstract  = {Due to increasing numbers of wind energy converters, the accurate assessment of the lifespan of their structural parts and the entire converter system is becoming more and more paramount. Lifespan-oriented design, inspections and remedial maintenance are challenging because of their complex dynamic behavior. Wind energy converters are subjected to stochastic turbulent wind loading causing corresponding stochastic structural response and vibrations associated with an extreme number of stress cycles (up to 109 according to the rotation of the blades). Currently, wind energy converters are constructed for a service life of about 20 years. However, this estimation is more or less made by rule of thumb and not backed by profound scientific analyses or accurate simulations. By contrast, modern structural health monitoring systems allow an improved identification of deteriorations and, thereupon, to drastically advance the lifespan assessment of wind energy converters. In particular, monitoring systems based on artificial intelligence techniques represent a promising approach towards cost-efficient and reliable real-time monitoring. Therefore, an innovative real-time structural health monitoring concept based on software agents is introduced in this contribution. For a short time, this concept is also turned into a real-world monitoring system developed in a DFG joint research project in the authors' institute at the Ruhr-University Bochum. In this paper, primarily the agent-based development, implementation and application of the monitoring system is addressed, focusing on the real-time monitoring tasks in the deserved detail.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{KhanCongKarstenetal.,
  author    = {Khan, Farhan Manzoor Ahmed and Cong, ZiXiang and Karsten, Menzel and Stack, Paul},
  title     = {TRACKING OCCUPANTS AND INVENTORY ITEMS IN BUILDINGS USING RADIO FREQUENCY IDENTIFICATION (RFID) TECHNOLOGY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2856},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28562},
  pages     = {13},
  abstract  = {In order to make control decisions, Smart Buildings need to collect data from multiple sources and bring it to a central location, such as the Building Management System (BMS). This needs to be done in a timely and automated fashion. Besides data being gathered from different energy using elements, information of occupant behaviour is also important for a building's requirement analysis. In this paper, the parameter of Occupant Density was considered to help find behaviour of occupants towards a building space. Through this parameter, support for building energy consumption and requirements based on occupant need and demands was provided. The demonstrator presented provides information on the number of people present in a particular building space at any time, giving the space density. Such collections of density data made over a certain period of time represents occupant behaviour towards the building space, giving its usage patterns. Similarly, inventory items were tracked and monitored for moving out or being brought into a particular read zone. For both, people and inventory items, this was achieved using small, low-cost, passive Ultra-High Frequency (UHF) Radio Frequency Identification (RFID) tags. Occupants were given the tags in a form factor of a credit card to be possessed at all times. A central database was built where occupant and inventory information for a particular building space was maintained for monitoring and providing a central data access.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BauerDudekRichter,
  author    = {Bauer, Marek and Dudek, Mariusz and Richter, Matthias},
  title     = {RELIABILITY OF TRAM - NETWORK SECTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2828},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28281},
  pages     = {16},
  abstract  = {We investigate aspects of tram-network section reliability, which operates as a part of the model of whole city tram-network reliability. Here, one of the main points of interest is the character of the chronological development of the disturbances (namely the differences between time of departure provided in schedule and real time of departure) on subsequent sections during tram line operation. These developments were observed in comprehensive measurements done in Krakow, during one of the main transportation nodes (Rondo Mogilskie) rebuilding. All taken building activities cause big disturbances in tram lines operation with effects extended to neighboring sections. In a second part, the stochastic character of section running time will be analyzed more detailed. There will be taken into consideration sections with only one beginning stop and also with two or three beginning stops located at different streets at an intersection. Possibility of adding results from sections with two beginning stops to one set will be checked with suitable statistical tests which are used to compare the means of the two samples. Section running time may depend on the value of gap between two following trams and from the value of deviation from schedule. This dependence will be described by a multi regression formula. The main measurements were done in the city center of Krakow in two stages: before and after big changes in tramway infrastructure.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{FlaigApel,
  author    = {Flaig, Thomas and Apel, Thomas},
  title     = {SIMULATION AND MATHEMATICAL OPTIMIZATION OF THE HYDRATION OF CONCRETE FOR AVOIDING THERMAL CRACKS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2842},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28424},
  pages     = {15},
  abstract  = {After mixing of concrete, the hardening starts by an exothermic chemical reaction known as hydration. As the reaction rate depends on the temperature the time in the description of the hydration is replaced by the maturity which is defined as an integral over a certain function depending on the temperature. The temperature distribution is governed by the heat equation with a right hand side depending on the maturity and the temperature itself. We compare of the performance of different time integration schemes of higher order with an automatic time step control. The simulation of the heat distribution is of importance as the development of mechanical properties is driven by the hydration. During this process it is possible that the tensile stresses exceed the tensile strength and cracks occur. The goal is to produce cheap concrete without cracks. Simple crack-criterions use only temperature differences, more involved ones are based on thermal stresses. If the criterion predicts cracks some changes in the input data are needed. This can be interpreted as optimization. The final goal will be to adopt model based optimization (in contrast to simulation based optimization) to the problem of the hydration of young concrete and the avoidance of cracks. The first step is the simulation of the hydration, which we focus in this paper.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{DeSchepperBrackxSommen,
  author    = {De Schepper, Nele and Brackx, Fred and Sommen, Frank},
  title     = {THE FOURIER-BESSEL TRANSFORM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2838},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28387},
  pages     = {18},
  abstract  = {In this paper we devise a new multi-dimensional integral transform within the Clifford analysis setting, the so-called Fourier-Bessel transform. It appears that in the two-dimensional case, it coincides with the Clifford-Fourier and cylindrical Fourier transforms introduced earlier. We show that this new integral transform satisfies operational formulae which are similar to those of the classical tensorial Fourier transform. Moreover the L2-basis elements consisting of generalized Clifford-Hermite functions appear to be eigenfunctions of the Fourier-Bessel transform.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{RogozaUbysz,
  author    = {Rogoza, Agnieszka and Ubysz, Andrzej},
  title     = {NUMERICAL ANALYSIS OF THE CRACKED REINFORCED CONCRETE BEAMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2883},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28835},
  pages     = {8},
  abstract  = {We present the way of calculation of displacement in the bent reinforced concrete bar elements where rearrangement of internal forces and plastic hinge occurred. The described solution is based on prof. Borcz's mathematical model. It directly takes into consideration the effects connected with the occurrence of plastic hinge, such as for example a crack, by means of a differential equation of axis of the bent reinforced concrete beam. The EN Eurocode 2 makes it possible to consider the influence of plastic hinge on the values of the reinforced concrete structures. This influence can also be assumed using other analytical methods. However, the results obtained by the application of Eurocode 2 are higher from those received in testing. Just comparably big error level occurs when calculations are made by means of Borcz's method, but in the latter case, the results depend on the assumptions made beforehand. This method makes it possible to apply the experimental results using parameters r1 i r0. When the experimental results are taken into account, one could observe the compatibility between the calculations and actual deflections of the structure.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SampaioFerreiraRosario,
  author    = {Sampaio, Alcinia Zita and Ferreira, Miguel M. and Ros{\´a}rio, Daniel P.},
  title     = {BUILDING FACILITIES MANAGEMENT SUPPORT ON VIRTUAL INTERACTIVE MODEL: THE LIGHTING COMPONENT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2885},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28858},
  pages     = {12},
  abstract  = {The main aim of the research project in progress is to develop virtual models as tools to support decision-making in the planning of construction maintenance. The virtual models gives the capacity to allow them to transmit, visually and interactively, information related to the physical behaviour of materials, components of given infrastructures, defined as a function of the time variable. The interactive application allows decisions to be made on conception options in the definition of plans for maintenance, conservation or rehabilitation. The first virtual prototype that is now in progress concerns just lamps. It allows the examination of the physical model, visualizing, for each element modelled in 3D and linked to a database, the corresponding technical information concerned with the wear and tear aspects of the material, calculated for that period of time. In addition, the analysis of solutions for repair work or substitution and inherent cost are predicted, the results being obtained interactively and visualized in the virtual environment itself. The aim is that the virtual model should be able to be applied directly over the 3D models of new constructions, in situations of rehabilitation. The practical usage of these models is directed, then, towards supporting decision-making in the conception phase and the planning of maintenance. In further work other components will be analysed and incorporated into the virtual system.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SikiwatBreidtHartmann,
  author    = {Sikiwat, Tanongsak and Breidt, Michael and Hartmann, Dietrich},
  title     = {COMPUTATIONAL STEERING FOR COLLAPSE SIMULATION OF LARGE SCALE COMPLEX STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2890},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28908},
  pages     = {9},
  abstract  = {In order to model and simulate collapses of large scale complex structures, a user-friendly and high performance software system is essential. Because a large number of simulation experiments have to be performed, therefore, next to an appropriate simulation model and high performance computing, efficient interactive control and visualization capabilities of model parameters and simulation results are crucial. To this respect, this contribution is concerned with advancements of the software system CADCE (Computer Aided Demolition using Controlled Explosives) that is extended under particular consideration of computational steering concepts. Thereby, focus is placed on problems and solutions for the collapse simulation of real world large scale complex structures. The simulation model applied is based on a multilevel approach embedding finite element models on a local as well as a near field length scale, and multibody models on a global scale. Within the global level simulation, relevant effects of the local and the near field scale, such as fracture and failure processes of the reinforced concrete parts, are approximated by means of tailor-made multibody subsystems. These subsystems employ force elements representing nonlinear material characteristics in terms of force/displacement relationships that, in advance, are determined by finite element analysis. In particular, enhancements concerning the efficiency of the multibody model and improvements of the user interaction are presented that are crucial for the capability of the computational steering. Some scenarios of collapse simulations of real world large scale structures demonstrate the implementation of the above mentioned approaches within the computational steering.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MusialKaminskiUbysz,
  author    = {Musial, Michal and Kaminski, Mieczysław and Ubysz, Andrzej},
  title     = {FREE VIBRATION FREQUENCIES OF THE CRACKED REINFORCED CONCRETE BEAMS - METHODS OF CALCULATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2874},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28744},
  pages     = {8},
  abstract  = {The paper presents method of calculation of natural frequencies of the cracked reinforced concrete beams including discreet model of crack. The described method is based on the stiff finite elements method. It was modified in such a way as to take into account local discontinuities (ie. cracks). In addition, some theoretical studies as well as experimental tests of concrete mechanics based on discrete crack model were taken into consideration. The calculations were performed using the author's own numerical algorithm. Moreover, other calculation methods of dynamic reinforced concrete beams presented in standards and guidelines are discussed. Calculations performed by using different methods are compared with the results obtained in experimental tests.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{AbuAbedMilbradt,
  author    = {Abu Abed, Wassim and Milbradt, Peter},
  title     = {UNDERSTANDING THE ASPECT OF FUZZINESS IN INTERPOLATION METHODS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2872},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28726},
  pages     = {22},
  abstract  = {Fuzzy functions are suitable to deal with uncertainties and fuzziness in a closed form maintaining the informational content. This paper tries to understand, elaborate, and explain the problem of interpolating crisp and fuzzy data using continuous fuzzy valued functions. Two main issues are addressed here. The first covers how the fuzziness, induced by the reduction and deficit of information i.e. the discontinuity of the interpolated points, can be evaluated considering the used interpolation method and the density of the data. The second issue deals with the need to differentiate between impreciseness and hence fuzziness only in the interpolated quantity, impreciseness only in the location of the interpolated points and impreciseness in both the quantity and the location. In this paper, a brief background of the concept of fuzzy numbers and of fuzzy functions is presented. The numerical side of computing with fuzzy numbers is concisely demonstrated. The problem of fuzzy polynomial interpolation, the interpolation on meshes and mesh free fuzzy interpolation is investigated. The integration of the previously noted uncertainty into a coherent fuzzy valued function is discussed. Several sets of artificial and original measured data are used to examine the mentioned fuzzy interpolations.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Franssens,
  author    = {Franssens, Ghislain R.},
  title     = {INTRODUCTION TO CLIFFORD ANALYSIS OVER PSEUDO-EUCLIDEAN SPACE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2843},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28433},
  pages     = {16},
  abstract  = {An introduction is given to Clifford Analysis over pseudo-Euclidean space of arbitrary signature, called for short Ultrahyperbolic Clifford Analysis (UCA). UCA is regarded as a function theory of Clifford-valued functions, satisfying a first order partial differential equation involving a vector-valued differential operator, called a Dirac operator. The formulation of UCA presented here pays special attention to its geometrical setting. This permits to identify tensors which qualify as geometrically invariant Dirac operators and to take a position on the naturalness of contravariant and covariant versions of such a theory. In addition, a formal method is described to construct the general solution to the aforementioned equation in the context of covariant UCA.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Suzuki,
  author    = {Suzuki, Osamu},
  title     = {RECENT RESULTS ON ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2895},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28954},
  pages     = {13},
  abstract  = {The recent development on the mathematical theory and the computer simulations of iteration dynamical system of discrete Laplacian on the plane lattice is reviewed and the future problem is discussed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Randrianarivony,
  author    = {Randrianarivony, Maharavo},
  title     = {ON THE GENERATION OF HIERARCHICAL MESHES FOR MULTILEVEL FEM AND BEM SOLVERS FROM CAD DATA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2879},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28795},
  pages     = {20},
  abstract  = {As numerical techniques for solving PDE or integral equations become more sophisticated, treatments of the generation of the geometric inputs should also follow that numerical advancement. This document describes the preparation of CAD data so that they can later be applied to hierarchical BEM or FEM solvers. For the BEM case, the geometric data are described by surfaces which we want to decompose into several curved foursided patches. We show the treatment of untrimmed and trimmed surfaces. In particular, we provide prevention of smooth corners which are bad for diffeomorphism. Additionally, we consider the problem of characterizing whether a Coons map is a diffeomorphism from the unit square onto a planar domain delineated by four given curves. We aim primarily at having not only theoretically correct conditions but also practically efficient methods. As for FEM geometric preparation, we need to decompose a 3D solid into a set of curved tetrahedra. First, we describe some method of decomposition without adding too many Steiner points (additional points not belonging to the initial boundary nodes of the boundary surface). Then, we provide a methodology for efficiently checking whether a tetrahedral transfinite interpolation is regular. That is done by a combination of degree reduction technique and subdivision. Along with the method description, we report also on some interesting practical results from real CAD data.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SmithGarloffWerkle,
  author    = {Smith, Andrew Paul and Garloff, J{\"u}rgen and Werkle, Horst},
  title     = {VERIFIED SOLUTION OF FINITE ELEMENT MODELS WITH UNCERTAIN NODE LOCATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2901},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29010},
  pages     = {15},
  abstract  = {We consider a structural truss problem where all of the physical model parameters are uncertain: not just the material values and applied loads, but also the positions of the nodes are assumed to be inexact but bounded and are represented by intervals. Such uncertainty may typically arise from imprecision during the process of manufacturing or construction, or round-off errors. In this case the application of the finite element method results in a system of linear equations with numerous interval parameters which cannot be solved conventionally. Applying a suitable variable substitution, an iteration method for the solution of a parametric system of linear equations is firstly employed to obtain initial bounds on the node displacements. Thereafter, an interval tightening (pruning) technique is applied, firstly on the element forces and secondly on the node displacements, in order to obtain tight guaranteed enclosures for the interval solutions for the forces and displacements.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Soucek,
  author    = {Soucek, Vladimir},
  title     = {ON MASSLESS FIELD EQUATION IN HIGHER DIMENSIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2892},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28925},
  pages     = {13},
  abstract  = {The paper is devoted to a study of properties of homogeneous solutions of massless field equation in higher dimensions. We first treat the case of dimension 4. Here we use the two-component spinor language (developed for purposes of general relativity). We describe how are massless field operators related to a higher spin analogues of the de Rham sequence - the so called Bernstein-Gel'fand-Gel'fand (BGG) complexes - and how are they related to the twisted Dirac operators. Then we study similar question in higher (even) dimensions. Here we have to use more tools from representation theory of the orthogonal group. We recall the definition of massless field equations in higher dimensions and relations to higher dimensional conformal BGG complexes. Then we discuss properties of homogeneous solutions of massless field equation. Using some recent techniques for decomposition of tensor products of irreducible \$Spin(m)\$-modules, we are able to add some new results on a structure of the spaces of homogenous solutions of massless field equations. In particular, we show that the kernel of the massless field equation in a given homogeneity contains at least on specific irreducible submodule.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MeschkeGrytz,
  author    = {Meschke, G{\"u}nther and Grytz, Rafael},
  title     = {MULTISCALE MODELING AND COMPUTATIONAL REMODELING OF HUMAN EYE TISSUES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2871},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28712},
  pages     = {7},
  abstract  = {A stress based remodeling approach is used to investigate the sensitivity of the collagen architecture in humane eye tissues on the biomechanical response of the lamina cribrosa with a particular focus on the stress environment of the nerve fibers. This approach is based on a multi-level biomechanical framework, where the biomechanical properties of eye tissues are derived from a single crimped fibril at the micro-scale via the collagen network of distributed fibrils at the meso-scale to the incompressible and anisotropic soft tissue at the macro-scale. Biomechanically induced remodeling of the collagen network is captured on the meso-scale by allowing for a continuous reorientation of collagen fibrils. To investigate the multi-scale phenomena related to glaucomatous neuropathy a generalized computational homogenization scheme is applied to a coupled two-scale analysis of the human eye considering a numerical macro- and meso-scale model of the lamina cribrosa.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{GokceBrowneGokceetal.,
  author    = {Gokce, Hasan Ufuk and Browne, Donal and Gokce, Kamil Umut and Menzel, Karsten},
  title     = {IMPROVING ENERGY EFFICIENT OPERATION OF BUILDINGS WITH WIRELESS IT SYSTEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2845},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28453},
  pages     = {19},
  abstract  = {Reducing energy consumption is one of the major challenges for present day and will continue for future generations. The emerging EU directives relating to energy (EU EPBD and the EU Directive on Emissions Trading) now place demands on building owners to rate the energy performance of their buildings for efficient energy management. Moreover European Legislation (Directive 2006/32/EC) requires Facility Managers to reduce building energy consumption and operational costs. Currently sophisticated building services systems are available integrating off-the-shelf building management components. However this ad-hoc combination presents many difficulties to building owners in the management and upgrade of these systems. This paper addresses the need for integration concepts, holistic monitoring and analysis methodologies, life-cycle oriented decision support and sophisticated control strategies through the seamless integration of people, ICT-devices and computational resources via introducing the newly developed integrated system architecture. The first concept was applied to a residential building and the results were elaborated to improve current building conditions.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BauerRichterWeiss,
  author    = {Bauer, Marek and Richter, Matthias and Weiß, Hendrik},
  title     = {SIMULATION MODEL OF TRAM ROUTE OPERATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2829},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28295},
  pages     = {19},
  abstract  = {From passenger's perspective, punctuality is one of the most important features of tram route operation. We present a stochastic simulation model with special focus on determining important factors of influence. The statistical analysis bases on large samples (sample size is nearly 2000) accumulated from comprehensive measurements on eight tram routes in Cracow. For the simulation, we are not only interested in average values but also in stochastic characteristics like the variance and other properties of the distribution. A realization of trams operations is assumed to be a sequence of running times between successive stops and times spent by tram at the stops divided in passengers alighting and boarding times and times waiting for possibility of departure . The running time depends on the kind of track separation including the priorities in traffic lights, the length of the section and the number of intersections. For every type of section, a linear mixed regression model describes the average running time and its variance as functions of the length of the section and the number of intersections. The regression coefficients are estimated by the iterative re-weighted least square method. Alighting and boarding time mainly depends on type of vehicle, number of passengers alighting and boarding and occupancy of vehicle. For the distribution of the time waiting for possibility of departure suitable distributions like Gamma distribution and Lognormal distribution are fitted.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BertholdMilbradt,
  author    = {Berthold, Tim and Milbradt, Peter},
  title     = {ARTIFICIAL NEURONAL NETWORKS IN ENVIRONMENTAL ENGINEERING: THEORY AND APPLICATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2830},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28304},
  pages     = {14},
  abstract  = {Models in the context of engineering can be classified in process based and data based models. Whereas the process based model describes the problem by an explicit formulation, the data based model is often used, where no such mapping can be found due to the high complexity of the problem. Artificial Neuronal Networks (ANN) is a data based model, which is able to "learn" a mapping from a set of training patterns. This paper deals with the application of ANN in time dependent bathymetric models. A bathymetric model is a geometric representation of the sea bed. Typically, a bathymetry is been measured and afterwards described by a finite set of measured data. Measuring at different time steps leads to a time dependent bathymetric model. To obtain a continuous surface, the measured data has to be interpolated by some interpolation method. Unlike the explicitly given interpolation methods, the presented time dependent bathymetric model using an ANN trains the approximated surface in space and time in an implicit way. The ANN is trained by topographic measured data, which consists of the location (x,y) and time t. In other words the ANN is trained to reproduce the mapping h = f(x,y,t) and afterwards it is able to approximate the topographic height for a given location and date. In a further step, this model is extended to take meteorological parameters into account. This leads to a model of more predictive character.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{DeBieSommen,
  author    = {De Bie, Hendrik and Sommen, Frank},
  title     = {VECTOR AND BIVECTOR FOURIER TRANSFORMS IN CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2837},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28371},
  pages     = {11},
  abstract  = {In the past, several types of Fourier transforms in Clifford analysis have been studied. In this paper, first an overview of these different transforms is given. Next, a new equation in a Clifford algebra is proposed, the solutions of which will act as kernels of a new class of generalized Fourier transforms. Two solutions of this equation are studied in more detail, namely a vector-valued solution and a bivector-valued solution, as well as the associated integral transforms.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{HarbrechtEppler,
  author    = {Harbrecht, Helmut and Eppler, K.},
  title     = {SHAPE OPTIMIZATION FOR FREE BOUNDARY PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2850},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28508},
  pages     = {8},
  abstract  = {In this paper three different formulations of a Bernoulli type free boundary problem are discussed. By analyzing the shape Hessian in case of matching data it is distinguished between well-posed and ill-posed formulations. A nonlinear Ritz-Galerkin method is applied for discretizing the shape optimization problem. In case of well-posedness existence and convergence of the approximate shapes is proven. In combination with a fast boundary element method efficient first and second order shape optimization algorithms are obtained.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{DjordjevicPetkovicZivkovic,
  author    = {Djordjevic, Djordje and Petkovic, Dusan and Zivkovic, Darko},
  title     = {THE APPLICATION OF INTERVAL CALCULUS TO ESTIMATION OF PLATE DEFLECTION BY SOLVING POISSON'S PARTIAL DIFFERENTIAL EQUATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2839},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28397},
  pages     = {12},
  abstract  = {This paper describes the application of interval calculus to calculation of plate deflection, taking in account inevitable and acceptable tolerance of input data (input parameters). The simply supported reinforced concrete plate was taken as an example. The plate was loaded by uniformly distributed loads. Several parameters that influence the plate deflection are given as certain closed intervals. Accordingly, the results are obtained as intervals so it was possible to follow the direct influence of a change of one or more input parameters on output (in our example, deflection) values by using one model and one computing procedure. The described procedure could be applied to any FEM calculation in order to keep calculation tolerances, ISO-tolerances, and production tolerances in close limits (admissible limits). The Wolfram Mathematica has been used as tool for interval calculation.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Kunoth,
  author    = {Kunoth, Angela},
  title     = {MULTISCALE ANALYSIS OF MULTIVARIATE DATA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2864},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28644},
  pages     = {20},
  abstract  = {For many applications, nonuniformly distributed functional data is given which lead to large-scale scattered data problems. We wish to represent the data in terms of a sparse representation with a minimal amount of degrees of freedom. For this, an adaptive scheme which operates in a coarse-to-fine fashion using a multiscale basis is proposed. Specifically, we investigate hierarchical bases using B-splines and spline-(pre)wavelets. At each stage a leastsquares approximation of the data is computed. We take into account different requests arising in large-scale scattered data fitting: we discuss the fast iterative solution of the least square systems, regularization of the data, and the treatment of outliers. A particular application concerns the approximate continuation of harmonic functions, an issue arising in geodesy.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Schneider,
  author    = {Schneider, David},
  title     = {QUALITY OPTIMIZATION USING LOCALLY REFINED META MODELS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2886},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28864},
  pages     = {17},
  abstract  = {Quality is one of the most important properties of a product. Providing the optimal quality can reduce costs for rework, scrap, recall or even legal actions while satisfying customers demand for reliability. The aim is to achieve ``built-in'' quality within product development process (PDP). The common approach therefore is the robust design optimization (RDO). It uses stochastic values as constraint and/or objective to obtain a robust and reliable optimal design. In classical approaches the effort required for stochastic analysis multiplies with the complexity of the optimization algorithm. The suggested approach shows that it is possible to reduce this effort enormously by using previously obtained data. Therefore the support point set of an underlying metamodel is filled iteratively during ongoing optimization in regions of interest if this is necessary. In a simple example, it will be shown that this is possible without significant loss of accuracy.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Tomaz,
  author    = {Tomaz, Gra{\c{c}}a Maria},
  title     = {ON BLOCK MATRICES OF PASCAL TYPE IN CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2897},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28979},
  pages     = {8},
  abstract  = {Since the 90-ties the Pascal matrix, its generalizations and applications have been in the focus of a great amount of publications. As it is well known, the Pascal matrix, the symmetric Pascal matrix and other special matrices of Pascal type play an important role in many scientific areas, among them Numerical Analysis, Combinatorics, Number Theory, Probability, Image processing, Sinal processing, Electrical engineering, etc. We present a unified approach to matrix representations of special polynomials in several hypercomplex variables (new Bernoulli, Euler etc. polynomials), extending results of H. Malonek, G.Tomaz: Bernoulli polynomials and Pascal matrices in the context of Clifford Analysis, Discrete Appl. Math. 157(4)(2009) 838-847. The hypercomplex version of a new Pascal matrix with block structure, which resembles the ordinary one for polynomials of one variable will be discussed in detail.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Wolff,
  author    = {Wolff, Sebastian},
  title     = {NODALLY INTEGRATED FINITE ELEMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2902},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29028},
  pages     = {16},
  abstract  = {Nodal integration of finite elements has been investigated recently. Compared with full integration it shows better convergence when applied to incompressible media, allows easier remeshing and highly reduces the number of material evaluation points thus improving efficiency. Furthermore, understanding it may help to create new integration schemes in meshless methods as well. The new integration technique requires a nodally averaged deformation gradient. For the tetrahedral element it is possible to formulate a nodal strain which passes the patch test. On the downside, it introduces non-physical low energy modes. Most of these "spurious modes" are local deformation maps of neighbouring elements. Present stabilization schemes rely on adding a stabilizing potential to the strain energy. The stabilization is discussed within this article. Its drawbacks are easily identified within numerical experiments: Nonlinear material laws are not well represented. Plastic strains may often be underestimated. Geometrically nonlinear stabilization greatly reduces computational efficiency. The article reinterpretes nodal integration in terms of imposing a nonconforming C0-continuous strain field on the structure. By doing so, the origins of the spurious modes are discussed and two methods are presented that solve this problem. First, a geometric constraint is formulated and solved using a mixed formulation of Hu-Washizu type. This assumption leads to a consistent representation of the strain energy while eliminating spurious modes. The solution is exact, but only of theoretical interest since it produces global support. Second, an integration scheme is presented that approximates the stabilization criterion. The latter leads to a highly efficient scheme. It can even be extended to other finite element types such as hexahedrals. Numerical efficiency, convergence behaviour and stability of the new method is validated using linear tetrahedral and hexahedral elements.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Vorechovsky,
  author    = {Vorechovsk{\´y}, Miroslav},
  title     = {SIMULATION OF SIMPLY CROSS CORRELATED RANDOM FIELDS BY SERIES EXPANSION METHODS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2899},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28995},
  pages     = {13},
  abstract  = {A practical framework for generating cross correlated fields with a specified marginal distribution function, an autocorrelation function and cross correlation coefficients is presented in the paper. The contribution promotes a recent journal paper [1]. The approach relies on well known series expansion methods for simulation of a Gaussian random field. The proposed method requires all cross correlated fields over the domain to share an identical autocorrelation function and the cross correlation structure between each pair of simulated fields to be simply defined by a cross correlation coefficient. Such relations result in specific properties of eigenvectors of covariance matrices of discretized field over the domain. These properties are used to decompose the eigenproblem which must normally be solved in computing the series expansion into two smaller eigenproblems. Such decomposition represents a significant reduction of computational effort. Non-Gaussian components of a multivariate random field are proposed to be simulated via memoryless transformation of underlying Gaussian random fields for which the Nataf model is employed to modify the correlation structure. In this method, the autocorrelation structure of each field is fulfilled exactly while the cross correlation is only approximated. The associated errors can be computed before performing simulations and it is shown that the errors happen especially in the cross correlation between distant points and that they are negligibly small in practical situations.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{AhmedElSayedRashwanKamal,
  author    = {Ahmed El-Sayed, Ahmed and Rashwan, R. A. and Kamal, A.},
  title     = {HADAMARD GAPS IN WEIGHTED LOGARITHMIC BLOCH SPACE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2827},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28275},
  pages     = {20},
  abstract  = {We give a sufficient and a necessary condition for an analytic function "f" on the unit disk "D" with Hadamard gap to belong to a class of weighted logarithmic Bloch space as well as to the corresponding little weighted logarithmic Bloch space under some conditions posed on the defined weight function. Also, we study the relations between the class of weighted logarithmic Bloch functions and some other classes of analytic functions by the help of analytic functions in the Hadamard gap class.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{EbertBernsteinCerejeirasetal.,
  author    = {Ebert, Svend and Bernstein, Swanhild and Cerejeiras, Paula and K{\"a}hler, Uwe},
  title     = {NONZONAL WAVELETS ON S^N},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2840},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28406},
  pages     = {18},
  abstract  = {In the present article we will construct wavelets on an arbitrary dimensional sphere S^n due the approach of approximate Identities. There are two equivalently approaches to wavelets. The group theoretical approach formulates a square integrability condition for a group acting via unitary, irreducible representation on the sphere. The connection to the group theoretical approach will be sketched. The concept of approximate identities uses the same constructions in the background, here we select an appropriate section of dilations and translations in the group acting on the sphere in two steps. At First we will formulate dilations in terms of approximate identities and than we call in translations on the sphere as rotations. This leads to the construction of an orthogonal polynomial system in L²(SO(n+1)). That approach is convenient to construct concrete wavelets, since the appropriate kernels can be constructed form the heat kernel leading to the approximate Identity of Gauss-Weierstra\ss. We will work out conditions to functions forming a family of wavelets, subsequently we formulate how we can construct zonal wavelets from a approximate Identity and the relation to admissibility of nonzonal wavelets. Eventually we will give an example of a nonzonal Wavelet on \$S^n\$, which we obtain from the approximate identity of Gauss-Weierstraß.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{ConstalesKrausshar,
  author    = {Constales, Denis and Kraußhar, Rolf S{\"o}ren},
  title     = {ON THE KLEIN-GORDON EQUATION ON THE 3-TORUS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2863},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28639},
  pages     = {10},
  abstract  = {In this paper we consider the time independent Klein-Gordon equation on some conformally flat 3-tori with given boundary data. We set up an explicit formula for the fundamental solution. We show that we can represent any solution to the homogeneous Klein-Gordon equation on the torus as finite sum over generalized 3-fold periodic elliptic functions that are in the kernel of the Klein-Gordon operator. Furthermore we prove Cauchy and Green type integral formulas and set up a Teodorescu and Cauchy transform for the toroidal Klein-Gordon operator. These in turn are used to set up explicit formulas for the solution to the inhomogeneous version of the Klein-Gordon equation on the 3-torus.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{CacaoConstalesKrausshar,
  author    = {Cacao, Isabel and Constales, Denis and Kraußhar, Rolf S{\"o}ren},
  title     = {A UNIFIED APPROACH FOR THE TREATMENT OF SOME HIGHER DIMENSIONAL DIRAC TYPE EQUATIONS ON SPHERES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2834},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28343},
  pages     = {8},
  abstract  = {Using Clifford analysis methods, we provide a unified approach to obtain explicit solutions of some partial differential equations combining the n-dimensional Dirac and Euler operators, including generalizations of the classical time-harmonic Maxwell equations. The obtained regular solutions show strong connections between hypergeometric functions and homogeneous polynomials in the kernel of the Dirac operator.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{GrobConstalesKrausshar,
  author    = {Grob, Dennis and Constales, Denis and Kraußhar, Rolf S{\"o}ren},
  title     = {THE HYPERCOMPLEX SZEG{\"O} KERNEL METHOD FOR 3D MAPPING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2846},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28464},
  pages     = {7},
  abstract  = {In this paper we present rudiments of a higher dimensional analogue of the Szeg{\"o} kernel method to compute 3D mappings from elementary domains onto the unit sphere. This is a formal construction which provides us with a good substitution of the classical conformal Riemann mapping. We give explicit numerical examples and discuss a comparison of the results with those obtained alternatively by the Bergman kernel method.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Malonek,
  author    = {Malonek, Helmuth Robert},
  title     = {SPECIAL FUNCTIONS VERSUS ELEMENTARY FUNCTIONS IN HYPERCOMPLEX FUNCTION THEORY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2870},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28702},
  pages     = {3},
  abstract  = {In recent years special hypercomplex Appell polynomials have been introduced by several authors and their main properties have been studied by different methods and with different objectives. Like in the classical theory of Appell polynomials, their generating function is a hypercomplex exponential function. The observation that this generalized exponential function has, for example, a close relationship with Bessel functions confirmed the practical significance of such an approach to special classes of hypercomplex differentiable functions. Its usefulness for combinatorial studies has also been investigated. Moreover, an extension of those ideas led to the construction of complete sets of hypercomplex Appell polynomial sequences. Here we show how this opens the way for a more systematic study of the relation between some classes of Special Functions and Elementary Functions in Hypercomplex Function Theory.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{NguyenTuanDatchevaSchanz,
  author    = {Nguyen-Tuan, Long and Datcheva, Maria and Schanz, Tom},
  title     = {NUMERICAL SIMULATION AND INVERSE ANALYSIS OF THERMO-HYDRO-MECHANICAL BEHAVIOR OF SAND-BENTONITE MIXTURE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2876},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28767},
  pages     = {18},
  abstract  = {Sand-bentonite mixtures are well recognized as buffer and sealing material in nuclear waste repository constructions. The behaviour of compacted sand-bentonite mixture needs to be well understood in order to guarantee the safety and the efficiency of the barrier construction. This paper presents numerical simulations of swelling test and coupled thermo-hydro-mechanical (THM) test on compacted sand-bentonite mixture in order to reveal the influence of the temperature and hydraulic gradients on the distribution of temperature, mechanical stress and water content in such materials. Sensitivity analysis is carried out to identify the parameters which influence the most the response of the numerical model. Results of back analysis of the model parameters are reported and critically assessed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BaitschHartmann,
  author    = {Baitsch, Matthias and Hartmann, Dietrich},
  title     = {A FRAMEWORK FOR THE INTERACTIVE VISUALIZATION OF ENGINEERING MODELS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2919},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29194},
  pages     = {9},
  abstract  = {Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new - engineering model specific - filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Eickelkamp,
  author    = {Eickelkamp, Jens Peter},
  title     = {LIQUIDIT{\"A}TSPLANUNG VON BAUPROJEKTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2948},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29483},
  pages     = {12},
  abstract  = {Die Liquidit{\"a}tsplanung von Bauunternehmen XE "Liquidit{\"a}tsplanung" gilt als ein wesentliches Steuerungs-, Kontroll- sowie Informationsinstrument f{\"u}r interne und externe Adressaten und {\"u}bt eine Entscheidungsunterst{\"u}tzungsfunktion aus. Da die einzelnen Bauprojekte einen wesentlichen Anteil an den Gesamtkosten des Unternehmens ausmachen, besitzen diese auch einen erheblichen Einfluß auf die Liquidit{\"a}t und die Zahlungsf{\"a}higkeit der Bauunternehmung. Dem folgend ist es in der Baupraxis eine {\"u}bliche Verfahrensweise, die Liquidit{\"a}tsplanung zuerst projektbezogen zu erstellen und anschließend auf Unternehmensebene zu verdichten. Ziel der Ausf{\"u}hrungen ist es, die Zusammenh{\"a}nge von Arbeitskalkulation XE "Arbeitskalkulation" , Ergebnisrechnung XE "Ergebnisrechnung" und Finanzrechnung XE "Finanzrechnung" in Form eines deterministischen XE "Erkl{\"a}rungsmodells" Planungsmodells auf Projektebene darzustellen. Hierbei soll das Verst{\"a}ndnis und die Bedeutung der Verkn{\"u}pfungen zwischen dem technisch-orientierten Bauablauf und dessen Darstellung im Rechnungs- und Finanzwesen herausgestellt werden. Die Vorg{\"a}nge aus der Bauabwicklung, das heißt die Abarbeitung der Bauleistungsverzeichnispositionen und deren zeitliche Darstellung in einem Bauzeitenplan sind periodisiert in Gr{\"o}ßen der Betriebsbuchhaltung (Leistung, Kosten) zu transformieren und anschließend in der Finanzrechnung (Einzahlungen., Auszahlungen) nach Kreditoren und Debitoren aufzuschl{\"u}sseln.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchapkeSchererKatranuschkov,
  author    = {Schapke, Sven-Eric and Scherer, Raimar J. and Katranuschkov, Peter},
  title     = {SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3012},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30125},
  pages     = {10},
  abstract  = {In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{TrummerDenzlerSuesse,
  author    = {Trummer, Michael and Denzler, J. and S{\"u}ße, Herbert},
  title     = {PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3028},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30282},
  pages     = {8},
  abstract  = {The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MisyuraVolkova,
  author    = {Misyura, E. and Volkova, Viktorija},
  title     = {APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3031},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30313},
  pages     = {7},
  abstract  = {The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KimuraMakinoMaegaitoetal.,
  author    = {Kimura, Atsushi and Makino, Y. and Maegaito, Kentaro and Suzuki, Osamu},
  title     = {ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE (II) (THE VISUAL IMPRESSIONS GIVEN BY DESIGN-PATTERNS)},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2973},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29731},
  pages     = {4},
  abstract  = {The present study was designed to investigate the underlying factors determining the visual impressions of design-patterns that have complex textures. Design-patterns produced by "the dynamical system defined by iterations of discrete Laplacians on the plane lattice" were adopted as stimuli because they were not only complex, but also defined mathematically. In the experiment, 21 graduate and undergraduate students sorted 102 design-patterns into several groups by visual impressions. Those 102 patterns were classified into 12 categories by the cluster analysis. The results showed that the regularity of pattern was a most efficient factor for determining visual impressions of design-pattern, and there were some correspondence between visual impressions and mathematical variables of design-pattern. Especially, the visual impressions were influenced greatly by the neighborhood, and less influenced by steps of iterations.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Faustino,
  author    = {Faustino, Nelson},
  title     = {FISCHER DECOMPOSITION FOR DIFFERENCE DIRAC OPERATORS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2955},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29551},
  pages     = {10},
  abstract  = {We establish the basis of a discrete function theory starting with a Fischer decomposition for difference Dirac operators. Discrete versions of homogeneous polynomials, Euler and Gamma operators are obtained. As a consequence we obtain a Fischer decomposition for the discrete Laplacian. For the sake of simplicity we consider in the first part only Dirac operators which contain only forward or backward finite differences. Of course, these Dirac operators do not factorize the classic discrete Laplacian. Therefore, we will consider a different definition of a difference Dirac operator in the quaternionic case which do factorizes the discrete Laplacian.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SeidelGasserWerner,
  author    = {Seidel, Tilman and Gasser, Ingenuin and Werner, Bodo},
  title     = {CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3018},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30187},
  pages     = {8},
  abstract  = {Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Shapiro,
  author    = {Shapiro, Michael},
  title     = {ON HYPERHOLOMORPHIC POLYNOMIALS FOR THE CAUCHY-RIEMANN AND THE DIRAC OPERATORS OF CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3020},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30201},
  pages     = {1},
  abstract  = {Clifford Analysis, hyperholomorphic polynomials, Taylor Series.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ErikssonKettunen,
  author    = {Eriksson, Sirkka-Liisa and Kettunen, Jarkko},
  title     = {HYPERMONOGENIC POLYNOMIALS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2950},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29509},
  pages     = {22},
  abstract  = {It is well know that the power function is not monogenic. There are basically two ways to include the power function into the set of solutions: The hypermonogenic functions or holomorphic Cliffordian functions. L. Pernas has found out the dimension of the space of homogenous holomorphic Cliffordian polynomials of degree m, but his approach did not include a basis. It is known that the hypermonogenic functions are included in the space of holomorphic Cliffordian functions. As our main result we show that we can construct a basis for the right module of homogeneous holomorphic Cliffordian polynomials of degree m using hypermonogenic polynomials and their derivatives. To that end we first recall the function spaces of monogenic, hypermonogenic and holomorphic Cliffordian functions and give the results needed in the proof of our main theorem. We list some basic polynomials and their properties for the various function spaces. In particular, we consider recursive formulas, rules of differentiation and properties of linear independency for the polynomials.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{DzwigonHempel,
  author    = {Dzwigon, Wieslaw and Hempel, Lorenz},
  title     = {ZUR SYNCHRONISATION VON LINIEN IM {\"O}PNV},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2944},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29442},
  pages     = {12},
  abstract  = {Wir betrachten im {\"O}PNV ({\"O}ffentlichen Personennahverkehr) diejenige Situation, daß zwei Bus- oder Straßenbahnlinien gemeinsame Haltestellen haben. Ziel unserer Untersuchungen ist es, f{\"u}r beide Linien einen solchen Fahrplan zu finden, der f{\"u}r die Fahrg{\"a}ste m{\"o}glichst viel Bequemlichkeit bietet. Die Bedarfsstruktur - die Anzahl von Personen, die die beiden Linien benutzen - setzt dabei gewisse Beschr{\"a}nkungen f{\"u}r die Taktzeiten der beiden Linien. Die verbleibenden Entscheidungsfreiheiten sollen im Sinne der Zielstellung ausgenutzt werden. Im Vortrag wird folgenden Fragen nachgegangen: - nach welchen Kriterien kann man die "Bequemlichkeit" oder die "Synchonisationsg{\"u}te" messen? - wie kann man die einzelnen "Synchronisationsmaße" berechnen ? - wie kann man die verbleibenden Entscheidungsfreiheiten nutzen, um eine m{\"o}glichst gute Synchronisation zu erreichen ? Die Ergebnisse werden dann auf einige Beispiele angewandt und mit den bereitgestellten Methoden L{\"o}sungsvorschl{\"a}ge unterbreitet.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{RogożaStachonUbysz,
  author    = {Rogoża, Agnieszka and Stachon, T. and Ubysz, Andrzej},
  title     = {MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3005},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30050},
  pages     = {6},
  abstract  = {The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EngelkeSchuster,
  author    = {Engelke, Gerald and Schuster, Otmar},
  title     = {OPENING THE RESERVE OF ECONOMIC EFFICIENCY IN LOGISTICAL AND FACILITY MANAGEMENT SERVICES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3017},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30177},
  pages     = {8},
  abstract  = {In many branches companies often lose the visibility of their human and technical resources of their field service. On the one hand the people in the fieldservice are often free like kings on the other hand they do not take part of the daily communication in the central office and suffer under the lacking involvement in the decisions inside the central office. The result is inefficiency. Reproaches in both directions follow. With the radio systems and then mobile phones the ditch began to dry up. But the solutions are far from being productive.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {INTEGRIERTE SYSTEMBEDIENUNG IN GEB{\"A}UDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3013},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30132},
  pages     = {7},
  abstract  = {R{\"a}ume und Geb{\"a}ude sind heute wegen der enormen Funktionalit{\"a}t der technischen Geb{\"a}udeausr{\"u}stung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl f{\"u}r Wohn- als auch f{\"u}r Zweckimmobilien. Die Geb{\"a}udeleittechnik (GLT) und die Geb{\"a}udeautomation (GA) k{\"o}nnen hier unter sinnvoller Integration der M{\"o}glichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsb{\"u}ndelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Geb{\"a}udeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Ger{\"a}ten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil v{\"o}llig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausr{\"u}stungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundz{\"u}ge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterf{\"u}hrende Aktivit{\"a}ten.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{WoszczynaKaminskiMajetal.,
  author    = {Woszczyna, Anna and Kaminski, Mieczysław and Maj, Marek and Ubysz, Andrzej},
  title     = {ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3038},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30388},
  pages     = {7},
  abstract  = {Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Siekierski,
  author    = {Siekierski, Wojciech},
  title     = {VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3021},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30217},
  pages     = {8},
  abstract  = {The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one - on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection - with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SchoenbergerHermann,
  author    = {Sch{\"o}nberger, Karsten and Hermann, F.},
  title     = {COMPUTERGEST{\"U}TZTES PORTFOLIOMANAGEMENT - EIN PRAXISBEISPIEL},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3016},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30168},
  pages     = {10},
  abstract  = {Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das gr{\"o}ßte Wohnungsunternehmen in Th{\"u}ringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerst{\"a}nde und unterschiedliche Modernisierungsmaßnahmen und -st{\"a}nde unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivit{\"a}t, die Standortqualit{\"a}t und die Objektwirtschaftlichkeit f{\"a}llt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. {\"U}ber die Schritte der technischen Bestandserfassung, die Einwertung {\"u}ber ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugeh{\"o}riger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-j{\"a}hrigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{SchererGrinewitschus,
  author    = {Scherer, Klaus and Grinewitschus, Viktor},
  title     = {AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ F{\"U}R FACILITY MANAGEMENT UND ANWENDUNG},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2914},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29140},
  pages     = {9},
  abstract  = {Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsf{\"a}higkeit in kleinsten Formaten, mit geringsten Energien und zu g{\"u}nstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Ger{\"a}ten und Systemen ist nunmehr zur Selbstverst{\"a}ndlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir n{\"a}hern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der {\"u}berall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen t{\"a}glichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die gr{\"o}ßeren Computerkomponenten (z.B. PCs, Server) {\"u}ber Datenschnittstellen zu r{\"a}umlich verteilten Netzwerken verkn{\"u}pft (z.B. Internet, Intranet) und mit einer system{\"u}bergreifenden und ad{\"a}quaten Intelligenz (Software) programmiert, so k{\"o}nnen neuartige Funktionalit{\"a}ten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Geb{\"a}uden und R{\"a}umen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Geb{\"a}udephysik, technischer Geb{\"a}udeausr{\"u}stung (TGA) und Geb{\"a}udeautomation (GA) im Wege stehende Gewerketrennung zu {\"u}berwinden. Es entstehen f{\"u}r div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erl{\"a}uterte Beispiele f{\"u}r AmI-L{\"o}sungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notf{\"a}llen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im B{\"u}ro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Geb{\"a}uden. Im Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste L{\"o}sungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen M{\"o}glichkeiten f{\"u}r den Transfer dieser neuen Technologie in den Raum- und Geb{\"a}udebereich. Es folgt eine abschließende Zusammenfaßung und eine Einsch{\"a}tzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{ErlemannHartmann,
  author    = {Erlemann, Kai and Hartmann, Dietrich},
  title     = {PARALLELIZATION OF A MICROSCOPIC TRAFFIC SIMULATION SYSTEM USING MPIJAVA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2951},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29516},
  pages     = {8},
  abstract  = {Traffic simulation is a valuable tool for the design and evaluation of road networks. Over the years, the level of detail to which urban and freeway traffic can be simulated has increased steadily, shifting from a merely qualitative macroscopic perspective to a very detailed microscopic view, where the behavior of individual vehicles is emulated realistically. With the improvement of behavioral models, however, the computational complexity has also steadily increased, as more and more aspects of real-life traffic have to be considered by the simulation environment. Despite the constant increase in computing power of modern personal computers, microscopic simulation stays computationally expensive, limiting the maximum network size than can be simulated on a single-processor computer in reasonable time. Parallelization can distribute the computing load from a single computer system to a cluster of several computing nodes. To this end, the exisiting simulation framework had to be adapted to allow for a distributed approach. As the simulation is ultimately targeted to be executed in real-time, incorporating real traffic data, only a spatial partition of the simulation was considered, meaning the road network has to be partitioned into subnets of comparable complexity, to ensure a homogenous load balancing. The partition process must also ensure, that the division between subnets does only occur in regions, where no strong interaction between the separated road segments occurs (i.e. not in the direct vicinity of junctions). In this paper, we describe a new microscopic reasoning voting strategy, and discuss in how far the increasing computational costs of these more complex behaviors lend themselves to a parallelized approach. We show the parallel architecture employed, the communication between computing units using MPIJava, and the benefits and pitfalls of adapting a single computer application to be used on a multi-node computing cluster.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Muschalla,
  author    = {Muschalla, Dirk},
  title     = {OPTIMIZATION OF WATER RESOURCES SYSTEMS USING MULTI-OBJECTIVE EVOLUTION STRATEGIES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2995},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29953},
  pages     = {10},
  abstract  = {This paper deals with the development of a new multi-objective evolution strategy in combination with an integrated pollution-load and water-quality model. The optimization algorithm combines the advantages of the Non-Dominated Sorting Genetic Algorithm and Self-Adaptive Evolution Strategies. The identification of a good spread of solutions on the pareto-optimum front and the optimization of a large number of decision variables equally demands numerous simulation runs. In addition, statements with regard to the frequency of critical concentrations and peak discharges require continuous long-term simulations. Therefore, a fast operating integrated simulation model is needed providing the required precision of the results. For this purpose, a hydrological deterministic pollution-load model has been coupled with a river water-quality and a rainfall-runoff model. Wastewater treatment plants are simulated in a simplified way. The functionality of the optimization and simulation tool has been validated by analyzing a real catchment area including sewer system, WWTP, water body and natural river basin. For the optimization/rehabilitation of the urban drainage system, both innovative and approved measures have been examined and used as decision variables. As objective functions, investment costs and river water quality criteria have been used.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EblingScheuermann,
  author    = {Ebling, Julia and Scheuermann, G.},
  title     = {TEMPLATE MATCHING ON VECTOR FIELDS USING CLIFFORD ALGEBRA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2946},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29464},
  pages     = {25},
  abstract  = {Due to the amount of flow simulation and measurement data, automatic detection, classification and visualization of features is necessary for an inspection. Therefore, many automated feature detection methods have been developed in recent years. However, only one feature class is visualized afterwards in most cases, and many algorithms have problems in the presence of noise or superposition effects. In contrast, image processing and computer vision have robust methods for feature extraction and computation of derivatives of scalar fields. Furthermore, interpolation and other filter can be analyzed in detail. An application of these methods to vector fields would provide a solid theoretical basis for feature extraction. The authors suggest Clifford algebra as a mathematical framework for this task. Clifford algebra provides a unified notation for scalars and vectors as well as a multiplication of all basis elements. The Clifford product of two vectors provides the complete geometric information of the relative positions of these vectors. Integration of this product results in Clifford correlation and convolution which can be used for template matching of vector fields. For frequency analysis of vector fields and the behavior of vector-valued filters, a Clifford Fourier transform has been derived for 2D and 3D. Convolution and other theorems have been proved, and fast algorithms for the computation of the Clifford Fourier transform exist. Therefore the computation of Clifford convolution can be accelerated by computing it in Clifford Fourier domain. Clifford convolution and Fourier transform can be used for a thorough analysis and subsequent visualization of flow fields.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EbertLenzen,
  author    = {Ebert, Carsten and Lenzen, Armin},
  title     = {OUTPUT-ONLY ANALYSIS FOR EXPERIMENTAL DAMAGE DETECTION OF A TIED-ARCH BRIDGE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2945},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29452},
  pages     = {13},
  abstract  = {In civil engineering it is very difficult and often expensive to excite constructions such as bridges and buildings with an impulse hammer or shaker. This problem can be avoided with the output-only method as special feature of stochastic system identification. The permanently existing ambient noise (e.g. wind, traffic, waves) is sufficient to excite the structures in their operational conditions. The output-only method is able to estimate the observable part of a state-space-model which contains the dynamic characteristics of the measured mechanical system. Because of the assumption that the ambient excitation is white there is no requirement to measure the input. Another advantage of the output-only method is the possibility to get high detailed models by a special method, called polyreference setup. To pretend the availability of a much larger set of sensors the data from varying sensor locations will be collected. Several successive data sets are recorded with sensors at different locations (moving sensors) and fixed locations (reference sensors). The covariance functions of the reference sensors are bases to normalize the moving sensors. The result of the following subspace-based system identification is a high detailed black-box-model that contains the weighting function including the well-known dynamic parameters eigenfrequencies and mode shapes of the mechanical system. Emphasis of this lecture is the presentation of an extensive damage detection experiment. A 53-year old prestressed concrete tied-arch-bridge in H{\"u}nxe (Germany) was deconstructed in 2005. Preliminary numerous vibration measurements were accomplished. The first experiment for system modification was an additional support near the bridge bearing of one main girder. During a further experiment one hanger from one tied arch was cut through as an induced damage. Some first outcomes of the described experiments will be presented.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SampaioHenriquesStuderetal.,
  author    = {Sampaio, Alcinia Zita and Henriques, Pedro and Studer, P. and Luizi, Rui},
  title     = {VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30090},
  pages     = {9},
  abstract  = {The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BrackxDeSchepperSommen,
  author    = {Brackx, Fred and De Schepper, Nele and Sommen, Frank},
  title     = {Clifford-Hermite and Two-Dimensional Clifford-Gabor Filters For Early Vision},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2930},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29303},
  pages     = {22},
  abstract  = {Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BrackxDeKnockDeSchepper,
  author    = {Brackx, Fred and De Knock, B. and De Schepper, Hennie},
  title     = {A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2929},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29297},
  pages     = {15},
  abstract  = {In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BrackxDeSchepperDeSchepperetal.,
  author    = {Brackx, Fred and De Schepper, Hennie and De Schepper, Nele and Sommen, Frank},
  title     = {HERMITIAN CLIFFORD-HERMITE WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2931},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29313},
  pages     = {13},
  abstract  = {The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{WittwerBecker,
  author    = {Wittwer, Christof and Becker, Rainer},
  title     = {MODELLBASIERTE ERTRAGSKONTROLLE F{\"U}R PV ANLAGEN IN VERNETZTEN GEB{\"A}UDEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3036},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30363},
  pages     = {5},
  abstract  = {Subject of the paper is the realisation of a model based efficiency control system for PV generators using a simulation model. A standard 2-diodes model of PV generator is base of the ColSim model, which is implemented in ANSI C code for flexible code exporting. The algorithm is based on discretisized U-I characteristics, which allows the calculation of string topologies witch parallel and serial PV cells and modules. Shadowing effects can be modelled down to cell configuration using polar horizon definitions. The simulation model was ported to a real time environment, to calculate the efficiency of a PV system. Embedded System technology allows the networked operation and the integration of standard I/O devices. Futher work focus on the adaption of shadowing routine, which will be adapted to get the environment conditions from the real operation.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Geyer,
  author    = {Geyer, Philipp},
  title     = {MODELS FOR MULTIDISCIPLINARY DESIGN OPTIMIZATION: AN EXEMPLARY OFFICE BUILDING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2957},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29574},
  pages     = {10},
  abstract  = {The mathematical and technical foundations of optimization have been developed to a large extent. In the design of buildings, however, optimization is rarely applied because of insufficient adaptation of this method to the needs of building design. The use of design optimization requires the consideration of all relevant objectives in an interactive and multidisciplinary process. Disciplines such as structural, light, and thermal engineering, architecture, and economics impose various objectives on the design. A good solution calls for a compromise between these often contradictory objectives. This presentation outlines a method for the application of Multidisciplinary Design Optimization (MDO) as a tool for the designing of buildings. An optimization model is established considering the fact that in building design the non-numerical aspects are of major importance than in other engineering disciplines. A component-based decomposition enables the designer to manage the non-numerical aspects in an interactive design optimization process. A fa{\c{c}}ade example demonstrates a way how the different disciplines interact and how the components integrate the disciplines in one optimization model. In this grid-based fa{\c{c}}ade example, the materials switch between a discrete number of materials and construction types. For light and thermal engineering, architecture, and economics, analysis functions calculate the performance; utility functions serve as an important means for the evaluation since not every increase or decrease of a physical value improves the design. For experimental purposes, a genetic algorithm applied to the exemplary model demonstrates the use of optimization in this design case. A component-based representation first serves to manage non-numerical characteristics such as aesthetics. Furthermore, it complies with usual fabrication methods in building design and with object-oriented data handling in CAD. Therefore, components provide an important basis for an interactive MDO process in building design.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ChangChang,
  author    = {Chang, Wei-Tsang and Chang, Teng-Wen},
  title     = {TIME-BASED FORM TRANSFORMATION WITH FOLDING SPACE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2937},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29371},
  pages     = {10},
  abstract  = {Design activity could be treated as state transition computationally. In stepwise processing, in-between form-states are not easily observed. However, in this research time-based concept is introduced and applied in order to bridge the gap. In architecture, folding is one method of form manipulation and architects also want to search for alternatives by this operation. Besides, folding operation has to be defined and parameterized before time factor is involved as a variable of folding. As a result, time-based transformation provides sequential form states and redirects design activity.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Kisil,
  author    = {Kisil, Vladimir},
  title     = {FILLMORE-SPRINGER-CNOPS CONSTRUCTION IMPLEMENTED IN GINAC},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2974},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29744},
  pages     = {103},
  abstract  = {This is an implementation of the Fillmore-Springer-Cnops construction (FSCc) based on the Clifford algebra capacities of the GiNaC computer algebra system. FSCc linearises the linear-fraction action of the Mobius group. This turns to be very useful in several theoretical and applied fields including engineering. The core of this realisation of FSCc is done for an arbitrary dimension, while a subclass for two dimensional cycles add some 2D-specific routines including a visualisation to PostScript files through the MetaPost or Asymptote software. This library is a backbone of many result published in, which serve as illustrations of its usage. It can be ported (with various level of required changes) to other CAS with Clifford algebras capabilities.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Krasnov,
  author    = {Krasnov, Yakov},
  title     = {ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2982},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29822},
  pages     = {16},
  abstract  = {Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LehnerHartmann,
  author    = {Lehner, Karlheinz and Hartmann, Dietrich},
  title     = {USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2984},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29844},
  pages     = {10},
  abstract  = {Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LourensvanRooyen,
  author    = {Lourens, Eliz-Mari and van Rooyen, G.C.},
  title     = {Automating Preliminary Column Force Calculations In Multy-Storey Buildings},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2986},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29864},
  pages     = {10},
  abstract  = {In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Knyziak,
  author    = {Knyziak, Piotr},
  title     = {ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2979},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29792},
  pages     = {9},
  abstract  = {This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Kravchenko,
  author    = {Kravchenko, Vladislav},
  title     = {NEW APPLICATIONS OF PSEUDOANALYTIC FUNCTION THEORY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2983},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29835},
  pages     = {3},
  abstract  = {We show a close relation between the Schr{\"o}dinger equation and the conductivity equation to a Vekua equation of a special form. Under quite general conditions we propose an algorithm for explicit construction of pseudoanalytic positive formal powers for the Vekua equation that as a consequence gives us a complete system of solutions for the Schr{\"o}dinger and the conductivity equations. Besides the construction of complete systems of exact solutions for the above mentioned second order equations and the Dirac equation, we discuss some other applications of pseudoanalytic function theory.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{EygelaarvanRooyen,
  author    = {Eygelaar, Anton and van Rooyen, G.C.},
  title     = {ENGINEERING PROCESS MODEL SPECIFICATION AND RESOURCE LEVELING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2952},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29529},
  pages     = {18},
  abstract  = {The use of process models in the analysis, optimization and simulation of processes has proven to be extremely beneficial in the instances where they could be applied appropriately. However, the Architecture/Engineering/Construction (AEC) industries present unique challenges that complicate the modeling of their processes. A simple Engineering process model, based on the specification of Tasks, Datasets, Persons and Tools, and certain relations between them, have been developed, and its advantages over conventional techniques have been illustrated. Graph theory is used as the mathematical foundation mapping Tasks, Datasets, Persons and Tools to vertices and the relations between them to edges forming a directed graph. The acceptance of process modeling in AEC industries not only depends on the results it can provide, but the ease at which these results can be attained. Specifying a complex AEC process model is a dynamic exercise that is characterized by many modifications over the process model's lifespan. This article looks at reducing specification complexity, reducing the probability for erroneous input and allowing consistent model modification. Furthermore, the problem of resource leveling is discussed. Engineering projects are often executed with limited resources and determining the impact of such restrictions on the sequence of Tasks is important. Resource Leveling concerns itself with these restrictions caused by limited resources. This article looks at using Task shifting strategies to find a near-optimal sequence of Tasks that guarantees consistent Dataset evolution while resolving resource restrictions.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Klauer,
  author    = {Klauer, Thomas},
  title     = {MOBILE FACILITY MANAGEMENT ZUR INSPEKTION UND INSTANDHALTUNG VON INGENIEURBAUWERKEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2975},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29759},
  pages     = {10},
  abstract  = {In diesem Beitrag wird eine mobile Software-Komponente zur Vor-Ort-Unterst{\"u}tzung von Bauwerkspr{\"u}fungen gem{\"a}ß DIN 1076 „Ingenieurbauwerke im Zuge von Strassen und Wegen, {\"U}berwachung und Pr{\"u}fung" vorgestellt, welche sich im praktischen Einsatz bei der Hochbahn AG Hamburg befindet. Mit Hilfe dieses Werkzeugs kann die Aktivit{\"a}t am Bauwerk in den gesamten softwaregest{\"u}tzten Gesch{\"a}ftsprozess der auwerksinstandhaltung integriert und somit die Bearbeitungszeit einer Bauwerkspr{\"u}fung von der Vorbereitung bis zur Pr{\"u}fbericht-Erstellung reduziert werden. Die Technologie des Mobile Computing wird unter Ber{\"u}cksichtigung spezieller fachlicher Randbedingungen, wie z.B. dem Einsatzort unter freiem Himmel, erl{\"a}utert und es werden Methoden zur effizienten Datenerfassung mit Stift und Sprache vorgestellt und bewertet. Ferner wird die Einschr{\"a}nkung der Hardware durch die geringere Gr{\"o}ße der Endger{\"a}te, die sich durch die Bedingung der Mobilit{\"a}t ergibt, untersucht.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{BultheelJansenMaesetal.,
  author    = {Bultheel, Adhemar and Jansen, M. and Maes, J. and Van Aerschot, W. and Vanraes, E.},
  title     = {SUBDIVIDE AND CONQUER RESOLUTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2909},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29091},
  pages     = {47},
  abstract  = {This contribution will be freewheeling in the domain of signal, image and surface processing and touch briefly upon some topics that have been close to the heart of people in our research group. A lot of the research of the last 20 years in this domain that has been carried out world wide is dealing with multiresolution. Multiresolution allows to represent a function (in the broadest sense) at different levels of detail. This was not only applied in signals and images but also when solving all kinds of complex numerical problems. Since wavelets came into play in the 1980's, this idea was applied and generalized by many researchers. Therefore we use this as the central idea throughout this text. Wavelets, subdivision and hierarchical bases are the appropriate tools to obtain these multiresolution effects. We shall introduce some of the concepts in a rather informal way and show that the same concepts will work in one, two and three dimensions. The applications in the three cases are however quite different, and thus one wants to achieve very different goals when dealing with signals, images or surfaces. Because completeness in our treatment is impossible, we have chosen to describe two case studies after introducing some concepts in signal processing. These case studies are still the subject of current research. The first one attempts to solve a problem in image processing: how to approximate an edge in an image efficiently by subdivision. The method is based on normal offsets. The second case is the use of Powell-Sabin splines to give a smooth multiresolution representation of a surface. In this context we also illustrate the general method of construction of a spline wavelet basis using a lifting scheme.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KlawitterOstrowski,
  author    = {Klawitter, Arne and Ostrowski, M.},
  title     = {INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2976},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29767},
  pages     = {12},
  abstract  = {A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BeranDlask,
  author    = {Beran, V{\´a}clav and Dlask, Petr},
  title     = {CONSTRUCTION SPEED AND CASH FLOW OPTIMISATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2926},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29269},
  pages     = {10},
  abstract  = {Practical examples show that the improvement in cost flow and total amount of money spend in construction and further use may be cut significantly. The calculation is based on spreadsheets calculation, very easy to develop on most PC´s now a days. Construction works, are a field where the evaluation of Cash Flow can be and should be applied. Decisions about cash flow in construction are decisions with long-term impact and long-term memory. Mistakes from the distant past have a massive impact on situations in the present and into the far economic future of economic activities. Two approaches exist. The Just-in-Time (JIT) approach and life cycle costs (LCC) approach. The calculation example shows the dynamic results for the production speed in opposition to stable flow of production in duration of activities. More sophisticated rescheduling in optimal solution might bring in return extra profit. In the technologies and organizational processes for industrial buildings, railways and road reconstruction, public utilities and housing developments there are assembly procedures that are very appropriate for the given purpose, complicated research-, development-, innovation-projects are all very good aspects of these kinds of applications. The investors of large investments and all public invested money may be spent more efficiently if an optimisation speed-strategy can be calculated.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{ZangSommer,
  author    = {Zang, Di and Sommer, G.},
  title     = {ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3039},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30396},
  pages     = {10},
  abstract  = {We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Wittenberg,
  author    = {Wittenberg, Reinhold},
  title     = {AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3035},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30356},
  pages     = {7},
  abstract  = {Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gr{\"u}nde hierf{\"u}r sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings fr{\"u}hzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation st{\"a}ndig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete m{\"o}glich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende erm{\"o}glicht, dass gravierende Ver{\"a}nderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management fr{\"u}hzeitig (im Sinne eines Fr{\"u}hwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelm{\"a}ßig gepr{\"u}ft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren {\"u}berpr{\"u}ft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht verg{\"u}tet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verf{\"u}gung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{MelnikovSemenov,
  author    = {Melnikov, B. E. and Semenov, Artem},
  title     = {MULTILEVEL COMPUTATION IN CIVIL ENGINEERING BASED ON MULTIMODEL ELASTO-PLASTIC ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2991},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29911},
  pages     = {11},
  abstract  = {Requires for reliability and durability of structures and their elements with simultaneous material economy have stimulated improvement of constitutive equations for description of elasto-plastic deformation processes. This has led to the development of phenomenological modelling of complex phenomena of irreversible deformation including history-dependent and rate-dependent effects. During the last several decades many works have been devoted to the development of elasto-plastic models, in order to better predict the material behavior under combined variable thermo-mechanical loading. The increase of accuracy of stress analysis and safety factors for complex structures with the help of modern finite-element packages (ABAQUS, ANSYS, COSMOS, LS-DYNA, MSC.MARC, MSC.NASTRAN, PERMAS and other) can be provided only by use of complex and special variants of plasticity theories, which are adequate for the considered loading conditions and based on authentic information about properties of materials. The areas of application of the various theories (models) are as a rule unknown to the users of finite-element packages at the existing variety loading condition sin machine-building designs. At the moment a universal theory of inelasticity is absent and even the most accomplished theories can not guarantee adequate description of deformation processes for arbitrary structure under wide range of loading programs. The classifier of materials, loading conditions, effects (phenomena) and list of basic experiments are developed by the authors. Use of these classifiers for an establishment of hierarchy of models is a first step for introduction of the multimodel analysis into computational practice. The set of the classic and modern inelasticity theories is considered, so that they are applicable for stress analysis of structures under complex loading programs. Among them there are plastic flow theories with linear and nonlinear isotropic and kinematic hardening, multisurface theories, endochronic theory, holonomic theory, rheologic models, theory of elasto-plastic processes, slip theory, physical theories (single crystal and polycrystalline models) and others. The classification of materials provides rearranging by a degree of homogeneous, chemical composition, level of strength and plasticity, behavior under cyclic loading, anisotropy of properties at initial condition, anisotropy of properties during deformation process, structural stability. The classification of loading conditions takes into consideration proportional and non-proportional loading, temperature range, combination of cyclic and monotonous loading, one-axial, two-axial and complex stress state, curvature of strain path, presence of stress concentrators and level of strain gradient. A unified general form of constitutive equations is presented for all used material models based upon the concept of internal state variables. The wide range of mentioned above inelastic material models has been implemented into finite element program PANTOCRATOR developed by authors (see for details www.pantocrator.narod.ru). Application possibility of different material models is considered both for material element and for complex structures subjected to complex non-proportional loading.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{GalffyBaitschWellmannJelicetal.,
  author    = {Galffy, Mozes and Baitsch, Matthias and Wellmann Jelic, Andres and Hartmann, Dietrich},
  title     = {LIFETIME-ORIENTED OPTIMIZATION OF BRIDGE TIE RODS EXPOSED TO VORTEX-INDUCED ACROSS-WIND VIBRATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2956},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29561},
  pages     = {12},
  abstract  = {In recent years, damages in welded connections plates of vertical tie rods of several arched steel bridges have been reported. These damages are due to fatigue caused by wind-induced vibrations. In the present study, such phenomena are examined, and the corresponding lifetime of a reference bridge in M{\"u}nster-Hiltrup, Germany, is estimated, based on the actual shape of the connection plate. Also, the results obtained are compared to the expected lifetime of a connection plate, whose geometry has been optimized separately. The structural optimization, focussing on the shape of the cut at the hanger ends, has been carried out using evolution strategies. The oscillation amplitudes have been computed by means of the Newmark-Wilson time-step method, using an appropriate load model, which has been validated by on-site experiments on the selected reference bridge. Corresponding stress-amplitudes are evaluated by multiplying the oscillation amplitudes with a stress concentration factor. This factor has been computed on the basis of a finite element model of the system "hanger-welding-connection plate", applying solid elements, according to the notch stress approach. The damage estimation takes into account the stochastics of the exciting wind process, as well as the stochastics of the material parameters (fatigue strength) given in terms of Woehler-curves. The shape optimization results in a substantial increase of the estimated hanger lifetime. The comparison of the lifetimes of the bulk plate and of the welding revealed that, in the optimized structure, the welding, being the most sensitive part in the original structure, shows much more resistance against potential damages than the bulk material.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{MusialUbyszUlatowski,
  author    = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr},
  title     = {METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2996},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29965},
  pages     = {8},
  abstract  = {The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Volkova,
  author    = {Volkova, Viktorija},
  title     = {APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3032},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30329},
  pages     = {7},
  abstract  = {The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration - displacement". Unlike the trajectories mapping in a plane "velocity - displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SzolomickiBaranski,
  author    = {Szolomicki, Jerzy Pawel and Baranski, Jacek},
  title     = {COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30265},
  pages     = {7},
  abstract  = {In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Traversoni,
  author    = {Traversoni, Leonardo},
  title     = {MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3027},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30274},
  pages     = {8},
  abstract  = {We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic {\O}lms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{SzarataStarostina,
  author    = {Szarata, Andrzej and Starostina, T.},
  title     = {MAMDANI'S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3025},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30257},
  pages     = {1},
  abstract  = {This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Ubysz,
  author    = {Ubysz, Andrzej},
  title     = {MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.3029},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30294},
  pages     = {7},
  abstract  = {The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro-creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Loemker,
  author    = {L{\"o}mker, Thorsten Michael},
  title     = {SOLVING REVITALIZATION-PROBLEMS BY THE USE OF A CONSTRAINT PROGRAMING LANGUAGE},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2987},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29874},
  pages     = {13},
  abstract  = {This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that "design" is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}