@inproceedings{CruzFalcaoMalonek, author = {Cruz, J. F. and Falc{\~a}o, M. Irene and Malonek, Helmuth Robert}, title = {3D-MAPPINGS AND THEIR APPROXIMATION BY SERIES OF POWERS OF A SMALL PARAMETER}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2940}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29406}, pages = {14}, abstract = {In classical complex function theory the geometric mapping property of conformality is closely linked with complex differentiability. In contrast to the planar case, in higher dimensions the set of conformal mappings is only the set of M{\"o}bius transformations. Unfortunately, the theory of generalized holomorphic functions (by historical reasons they are called monogenic functions) developed on the basis of Clifford algebras does not cover the set of M{\"o}bius transformations in higher dimensions, since M{\"o}bius transformations are not monogenic. But on the other side, monogenic functions are hypercomplex differentiable functions and the question arises if from this point of view they can still play a special role for other types of 3D-mappings, for instance, for quasi-conformal ones. On the occasion of the 16th IKM 3D-mapping methods based on the application of Bergman's reproducing kernel approach (BKM) have been discussed. Almost all authors working before that with BKM in the Clifford setting were only concerned with the general algebraic and functional analytic background which allows the explicit determination of the kernel in special situations. The main goal of the abovementioned contribution was the numerical experiment by using a Maple software specially developed for that purpose. Since BKM is only one of a great variety of concrete numerical methods developed for mapping problems, our goal is to present a complete different from BKM approach to 3D-mappings. In fact, it is an extension of ideas of L. V. Kantorovich to the 3-dimensional case by using reduced quaternions and some suitable series of powers of a small parameter. Whereas until now in the Clifford case of BKM the recovering of the mapping function itself and its relation to the monogenic kernel function is still an open problem, this approach avoids such difficulties and leads to an approximation by monogenic polynomials depending on that small parameter.}, subject = {Architektur }, language = {en} } @inproceedings{BaitschHartmann, author = {Baitsch, Matthias and Hartmann, Dietrich}, title = {A FRAMEWORK FOR THE INTERACTIVE VISUALIZATION OF ENGINEERING MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2919}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29194}, pages = {9}, abstract = {Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new - engineering model specific - filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile.}, subject = {Architektur }, language = {en} } @inproceedings{BrackxDeKnockDeSchepper, author = {Brackx, Fred and De Knock, B. and De Schepper, Hennie}, title = {A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2929}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29297}, pages = {15}, abstract = {In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.}, subject = {Architektur }, language = {en} } @inproceedings{StackManzoorMenzeletal., author = {Stack, Paul and Manzoor, Farhan and Menzel, Karsten and Cahill, Brian}, title = {A SERVICE ORIENTED ARCHITECTURE FOR BUILDING PERFORMANCE MONITORING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2893}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28935}, pages = {18}, abstract = {Information technology plays a key role in the everyday operation of buildings and campuses. Many proprietary technologies and methodologies can assist in effective Building Performance Monitoring (BPM) and efficient managing of building resources. The integration of related tools like energy simulator packages, facility, energy and building management systems, and enterprise resource planning systems is of benefit to BPM. However, the complexity to integrating such domain specific systems prevents their common usage. Service Oriented Architecture (SOA) has been deployed successfully in many large multinational companies to create integrated and flexible software systems, but so far this methodology has not been applied broadly to the field of BPM. This paper envisions that SOA provides an effective integration framework for BPM. Service oriented architecture for the ITOBO framework for sustainable and optimised building operation is proposed and an implementation for a building performance monitoring system is introduced.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{CacaoConstalesKrausshar, author = {Cacao, Isabel and Constales, Denis and Kraußhar, Rolf S{\"o}ren}, title = {A UNIFIED APPROACH FOR THE TREATMENT OF SOME HIGHER DIMENSIONAL DIRAC TYPE EQUATIONS ON SPHERES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2834}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28343}, pages = {8}, abstract = {Using Clifford analysis methods, we provide a unified approach to obtain explicit solutions of some partial differential equations combining the n-dimensional Dirac and Euler operators, including generalizations of the classical time-harmonic Maxwell equations. The obtained regular solutions show strong connections between hypergeometric functions and homogeneous polynomials in the kernel of the Dirac operator.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SharmakScherer, author = {Sharmak, Wael and Scherer, Raimar J.}, title = {ADAPTABLE PROJECT MANAGEMENT PLANS USING CHANGE TEMPLATES-BASED APPROACH}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2888}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28886}, pages = {14}, abstract = {The uncertainty existing in the construction industry is bigger than in other industries. Consequently, most construction projects do not go totally as planned. The project management plan needs therefore to be adapted repeatedly within the project lifecycle to suit the actual project conditions. Generally, the risks of change in the project management plan are difficult to be identified in advance, especially if these risks are caused by unexpected events such as human errors or changes in the client preferences. The knowledge acquired from different resources is essential to identify the probable deviations as well as to find proper solutions to the faced change risks. Hence, it is necessary to have a knowledge base that contains known solutions for the common exceptional cases that may cause changes in each construction domain. The ongoing research work presented in this paper uses the process modeling technique of Event-driven Process Chains to describe different patterns of structure changes in the schedule networks. This results in several so called "change templates". Under each template different types of change risk/ response pairs can be categorized and stored in a knowledge base. This knowledge base is described as an ontology model populated with reference construction process data. The implementation of the developed approach can be seen as an iterative scheduling cycle that will be repeated within the project lifecycle as new change risks surface. This can help to check the availability of ready solutions in the knowledge base for the situation at hand. Moreover, if the solution is adopted, CPSP, "Change Project Schedule Plan „a prototype developed for the purpose of this research work, will be used to make the needed structure changes of the schedule network automatically based on the change template. What-If scenarios can be implemented using the CPSP prototype in the planning phase to study the effect of specific situations without endangering the success of the project objectives. Hence, better designed and more maintainable project schedules can be achieved.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{ZeiserDahmenRohwedderetal., author = {Zeiser, Andreas and Dahmen, W. and Rohwedder, T. and Schneider, R.}, title = {ADAPTIVE EIGENVALUE COMPUTATION FOR ELLIPTIC OPERATORS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2904}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29042}, pages = {14}, abstract = {We present recent developments of adaptive wavelet solvers for elliptic eigenvalue problems. We describe the underlying abstract iteration scheme of the preconditioned perturbed iteration. We apply the iteration to a simple model problem in order to identify the main ideas which a numerical realization of the abstract scheme is based upon. This indicates how these concepts carry over to wavelet discretizations. Finally we present numerical results for the Poisson eigenvalue problem on an L-shaped domain.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{WallFoersterNeumannetal., author = {Wall, Wolfgang A. and F{\"o}rster, Christiane and Neumann, Malte and Ramm, Ekkehard}, title = {ADVANCES IN FLUID-STRUCTURE INTERACTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2916}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29161}, pages = {17}, abstract = {For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements. Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme.}, subject = {Architektur }, language = {en} } @inproceedings{ZangSommer, author = {Zang, Di and Sommer, G.}, title = {ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3039}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30396}, pages = {10}, abstract = {We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.}, subject = {Architektur }, language = {en} } @inproceedings{SchererGrinewitschus, author = {Scherer, Klaus and Grinewitschus, Viktor}, title = {AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ F{\"U}R FACILITY MANAGEMENT UND ANWENDUNG}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2914}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29140}, pages = {9}, abstract = {Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsf{\"a}higkeit in kleinsten Formaten, mit geringsten Energien und zu g{\"u}nstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Ger{\"a}ten und Systemen ist nunmehr zur Selbstverst{\"a}ndlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir n{\"a}hern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der {\"u}berall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen t{\"a}glichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die gr{\"o}ßeren Computerkomponenten (z.B. PCs, Server) {\"u}ber Datenschnittstellen zu r{\"a}umlich verteilten Netzwerken verkn{\"u}pft (z.B. Internet, Intranet) und mit einer system{\"u}bergreifenden und ad{\"a}quaten Intelligenz (Software) programmiert, so k{\"o}nnen neuartige Funktionalit{\"a}ten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Geb{\"a}uden und R{\"a}umen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Geb{\"a}udephysik, technischer Geb{\"a}udeausr{\"u}stung (TGA) und Geb{\"a}udeautomation (GA) im Wege stehende Gewerketrennung zu {\"u}berwinden. Es entstehen f{\"u}r div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erl{\"a}uterte Beispiele f{\"u}r AmI-L{\"o}sungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notf{\"a}llen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im B{\"u}ro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Geb{\"a}uden. Im Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste L{\"o}sungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen M{\"o}glichkeiten f{\"u}r den Transfer dieser neuen Technologie in den Raum- und Geb{\"a}udebereich. Es folgt eine abschließende Zusammenfaßung und eine Einsch{\"a}tzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.}, subject = {Architektur }, language = {de} } @inproceedings{CastilloPerez, author = {Castillo-P{\´e}rez, Ra{\´u}l}, title = {AN APPLICATION OF FORMAL POWER SERIES FOR THE DEVELOPMENT OF OPTICAL FILTERS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2835}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28354}, pages = {8}, abstract = {The application of a recent method using formal power series is proposed. It is based on a new representation for solutions of Sturm-Liouville equations. This method is used to calculate the transmittance and reflectance coefficients of finite inhomogeneous layers with high accuracy and efficiency. Tailoring the refraction index profile defining the inhomogeneous media it is possible to develop very important applications such as optical filters. A number of profiles were evaluated and then some of them selected in order to perform an improvement of their characteristics via the modification of their profiles.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{WoszczynaKaminskiMajetal., author = {Woszczyna, Anna and Kaminski, Mieczysław and Maj, Marek and Ubysz, Andrzej}, title = {ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3038}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30388}, pages = {7}, abstract = {Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.}, subject = {Architektur }, language = {en} } @inproceedings{RyanKrausshar, author = {Ryan, John and Kraußhar, Rolf S{\"o}ren}, title = {ANALYSIS OF DIRAC OPERATORS ON SOME CONFORMALLY FLAT MANIFOLDS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3008}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30081}, pages = {5}, abstract = {In this paper we shall review the role of Dirac operators arising in Clifford analysis over some examples of conformally flat manifolds.}, subject = {Architektur }, language = {en} } @inproceedings{Knyziak, author = {Knyziak, Piotr}, title = {ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2979}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29792}, pages = {9}, abstract = {This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.}, subject = {Architektur }, language = {en} } @inproceedings{Krasnov, author = {Krasnov, Yakov}, title = {ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2982}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29822}, pages = {16}, abstract = {Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.}, subject = {Architektur }, language = {en} } @inproceedings{MisyuraVolkova, author = {Misyura, E. and Volkova, Viktorija}, title = {APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3031}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30313}, pages = {7}, abstract = {The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes.}, subject = {Architektur }, language = {en} } @inproceedings{Volkova, author = {Volkova, Viktorija}, title = {APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3032}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30329}, pages = {7}, abstract = {The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration - displacement". Unlike the trajectories mapping in a plane "velocity - displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.}, subject = {Architektur }, language = {en} } @inproceedings{GruberValdman, author = {Gruber, Peter and Valdman, J.}, title = {APPROXIMATE SOLUTION OF ELASTOPLASTIC PROBLEMS BASED ON THE MOREAU-YOSIDA THEOREM}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2960}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29602}, pages = {8}, abstract = {We propose a new approach to the numerical solution of quasi-static elastic-plastic problems based on the Moreau-Yosida theorem. After the time discretization, the problem is expressed as an energy minimization problem for unknown displacement and plastic strain fields. The dependency of the minimization functional on the displacement is smooth whereas the dependency on the plastic strain is non-smooth. Besides, there exists an explicit formula, how to calculate the plastic strain from a given displacement field. This allows us to reformulate the original problem as a minimization problem in the displacement only. Using the Moreau-Yosida theorem from the convex analysis, the minimization functional in the displacements turns out to be Frechet-differentiable, although the hidden dependency on the plastic strain is non-differentiable. The seconds derivative exists everywhere apart from the elastic-plastic interface dividing elastic and plastic zones of the continuum. This motivates to implement a Newton-like method, which converges super-linearly as can be observed in our numerical experiments.}, subject = {Architektur }, language = {en} } @inproceedings{BertholdMilbradt, author = {Berthold, Tim and Milbradt, Peter}, title = {ARTIFICIAL NEURONAL NETWORKS IN ENVIRONMENTAL ENGINEERING: THEORY AND APPLICATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2830}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28304}, pages = {14}, abstract = {Models in the context of engineering can be classified in process based and data based models. Whereas the process based model describes the problem by an explicit formulation, the data based model is often used, where no such mapping can be found due to the high complexity of the problem. Artificial Neuronal Networks (ANN) is a data based model, which is able to "learn" a mapping from a set of training patterns. This paper deals with the application of ANN in time dependent bathymetric models. A bathymetric model is a geometric representation of the sea bed. Typically, a bathymetry is been measured and afterwards described by a finite set of measured data. Measuring at different time steps leads to a time dependent bathymetric model. To obtain a continuous surface, the measured data has to be interpolated by some interpolation method. Unlike the explicitly given interpolation methods, the presented time dependent bathymetric model using an ANN trains the approximated surface in space and time in an implicit way. The ANN is trained by topographic measured data, which consists of the location (x,y) and time t. In other words the ANN is trained to reproduce the mapping h = f(x,y,t) and afterwards it is able to approximate the topographic height for a given location and date. In a further step, this model is extended to take meteorological parameters into account. This leads to a model of more predictive character.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Wittenberg, author = {Wittenberg, Reinhold}, title = {AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3035}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30356}, pages = {7}, abstract = {Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gr{\"u}nde hierf{\"u}r sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings fr{\"u}hzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation st{\"a}ndig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete m{\"o}glich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende erm{\"o}glicht, dass gravierende Ver{\"a}nderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management fr{\"u}hzeitig (im Sinne eines Fr{\"u}hwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelm{\"a}ßig gepr{\"u}ft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren {\"u}berpr{\"u}ft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht verg{\"u}tet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verf{\"u}gung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.}, subject = {Architektur }, language = {de} } @inproceedings{LourensvanRooyen, author = {Lourens, Eliz-Mari and van Rooyen, G.C.}, title = {Automating Preliminary Column Force Calculations In Multy-Storey Buildings}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2986}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29864}, pages = {10}, abstract = {In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given.}, subject = {Architektur }, language = {en} } @inproceedings{CacaoConstalesKrausshar, author = {Cacao, Isabel and Constales, Denis and Kraußhar, Rolf S{\"o}ren}, title = {BESSEL FUNCTIONS AND HIGHER DIMENSIONAL DIRAC TYPE EQUATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2936}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29366}, pages = {8}, abstract = {In this paper we study the structure of the solutions to higher dimensional Dirac type equations generalizing the known λ-hyperholomorphic functions, where λ is a complex parameter. The structure of the solutions to the system of partial differential equations (D- λ) f=0 show a close connection with Bessel functions of first kind with complex argument. The more general system of partial differential equations that is considered in this paper combines Dirac and Euler operators and emphasizes the role of the Bessel functions. However, contrary to the simplest case, one gets now Bessel functions of any arbitrary complex order.}, subject = {Architektur }, language = {en} } @inproceedings{RueppelAbolghasemzadeh, author = {R{\"u}ppel, Uwe and Abolghasemzadeh, Puyan}, title = {BIM-BASED IMMERSIVE EVACUATION SIMULATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2884}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28845}, pages = {9}, abstract = {The changed global security situation in the last eight years has shown the importance of emergency management plans in public buildings. Therefore, the use of computer simulators for surveying fire safety design and evacuation process is increasing. The aim of these simulators is to have more realistic evacuation simulations. The challenge is, firstly, to realize the virtual simulation environment based on geometrical and material boundary conditions, secondly, to considerate the mutual interaction effects between different parameters and, finally, to have a realistic visualization of the simulated results. In order to carry out this task, an especial new software method on a BIM-platform has to be developed which can integrate all required simulations and will be able to have an immersive output BIM ISEE (Immersive Safety Engineering Environment). The new BIM-ISEE will integrate the Fire Dynamics Simulator (FDS) for fire and evacuation simulation in the Autodesk Revit which is a BIM-platform and will represent the simulation results in the immersive virtual environment at the institute (CES-Lab). With BIM-ISEE the fire safety engineer will be able to obtain more realistic visualizations in the immersive environment, to modify his concept more effectively, to evaluate the simulation results more accurately and to visualize the various simulation results. It can also give the rescue staff the opportunity to perform and evaluate emergency evacuation trainings.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SampaioFerreiraRosario, author = {Sampaio, Alcinia Zita and Ferreira, Miguel M. and Ros{\´a}rio, Daniel P.}, title = {BUILDING FACILITIES MANAGEMENT SUPPORT ON VIRTUAL INTERACTIVE MODEL: THE LIGHTING COMPONENT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2885}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28858}, pages = {12}, abstract = {The main aim of the research project in progress is to develop virtual models as tools to support decision-making in the planning of construction maintenance. The virtual models gives the capacity to allow them to transmit, visually and interactively, information related to the physical behaviour of materials, components of given infrastructures, defined as a function of the time variable. The interactive application allows decisions to be made on conception options in the definition of plans for maintenance, conservation or rehabilitation. The first virtual prototype that is now in progress concerns just lamps. It allows the examination of the physical model, visualizing, for each element modelled in 3D and linked to a database, the corresponding technical information concerned with the wear and tear aspects of the material, calculated for that period of time. In addition, the analysis of solutions for repair work or substitution and inherent cost are predicted, the results being obtained interactively and visualized in the virtual environment itself. The aim is that the virtual model should be able to be applied directly over the 3D models of new constructions, in situations of rehabilitation. The practical usage of these models is directed, then, towards supporting decision-making in the conception phase and the planning of maintenance. In further work other components will be analysed and incorporated into the virtual system.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SeidelGasserWerner, author = {Seidel, Tilman and Gasser, Ingenuin and Werner, Bodo}, title = {CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3018}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30187}, pages = {8}, abstract = {Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.}, subject = {Architektur }, language = {en} } @inproceedings{BrackxDeSchepperSommen, author = {Brackx, Fred and De Schepper, Nele and Sommen, Frank}, title = {Clifford-Hermite and Two-Dimensional Clifford-Gabor Filters For Early Vision}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2930}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29303}, pages = {22}, abstract = {Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.}, subject = {Architektur }, language = {en} } @inproceedings{DoganArditiGunaydin, author = {Dogan, Sevgi Zeynep and Arditi, D. and Gunaydin, H. Murat}, title = {COMPARISON OF ANN AND CBR MODELS FOR EARLY COST PREDICTION OF STRUCTURAL SYSTEMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2942}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29421}, abstract = {Reasonably accurate cost estimation of the structural system is quite desirable at the early stages of the design process of a construction project. However, the numerous interactions among the many cost-variables make the prediction difficult. Artificial neural networks (ANN) and case-based reasoning (CBR) are reported to overcome this difficulty. This paper presents a comparison of CBR and ANN augmented by genetic algorithms (GA) conducted by using spreadsheet simulations. GA was used to determine the optimum weights for the ANN and CBR models. The cost data of twenty-nine actual cases of residential building projects were used as an example application. Two different sets of cases were randomly selected from the data set for training and testing purposes. Prediction rates of 84\% in the GA/CBR study and 89\% in the GA/ANN study were obtained. The advantages and disadvantages of the two approaches are discussed in the light of the experiments and the findings. It appears that GA/ANN is a more suitable model for this example of cost estimation where the prediction of numerical values is required and only a limited number of cases exist. The integration of GA into CBR and ANN in a spreadsheet format is likely to improve the prediction rates.}, subject = {Architektur }, language = {en} } @inproceedings{SzolomickiBaranski, author = {Szolomicki, Jerzy Pawel and Baranski, Jacek}, title = {COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3026}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30265}, pages = {7}, abstract = {In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.}, subject = {Architektur }, language = {en} } @inproceedings{SikiwatBreidtHartmann, author = {Sikiwat, Tanongsak and Breidt, Michael and Hartmann, Dietrich}, title = {COMPUTATIONAL STEERING FOR COLLAPSE SIMULATION OF LARGE SCALE COMPLEX STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2890}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28908}, pages = {9}, abstract = {In order to model and simulate collapses of large scale complex structures, a user-friendly and high performance software system is essential. Because a large number of simulation experiments have to be performed, therefore, next to an appropriate simulation model and high performance computing, efficient interactive control and visualization capabilities of model parameters and simulation results are crucial. To this respect, this contribution is concerned with advancements of the software system CADCE (Computer Aided Demolition using Controlled Explosives) that is extended under particular consideration of computational steering concepts. Thereby, focus is placed on problems and solutions for the collapse simulation of real world large scale complex structures. The simulation model applied is based on a multilevel approach embedding finite element models on a local as well as a near field length scale, and multibody models on a global scale. Within the global level simulation, relevant effects of the local and the near field scale, such as fracture and failure processes of the reinforced concrete parts, are approximated by means of tailor-made multibody subsystems. These subsystems employ force elements representing nonlinear material characteristics in terms of force/displacement relationships that, in advance, are determined by finite element analysis. In particular, enhancements concerning the efficiency of the multibody model and improvements of the user interaction are presented that are crucial for the capability of the computational steering. Some scenarios of collapse simulations of real world large scale structures demonstrate the implementation of the above mentioned approaches within the computational steering.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SchoenbergerHermann, author = {Sch{\"o}nberger, Karsten and Hermann, F.}, title = {COMPUTERGEST{\"U}TZTES PORTFOLIOMANAGEMENT - EIN PRAXISBEISPIEL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3016}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30168}, pages = {10}, abstract = {Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das gr{\"o}ßte Wohnungsunternehmen in Th{\"u}ringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerst{\"a}nde und unterschiedliche Modernisierungsmaßnahmen und -st{\"a}nde unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivit{\"a}t, die Standortqualit{\"a}t und die Objektwirtschaftlichkeit f{\"a}llt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. {\"U}ber die Schritte der technischen Bestandserfassung, die Einwertung {\"u}ber ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugeh{\"o}riger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-j{\"a}hrigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist.}, subject = {Architektur }, language = {de} } @inproceedings{Schiller, author = {Schiller, Christian}, title = {CONSTRAINED TRAFFIC DEMAND MODELS - SIMULTANEOUS DISTRIBUTION AND MODE CHOICE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3014}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30148}, pages = {16}, abstract = {Unconstrained models are very often found in the broad spectrum of different theories of traffic demand models. In these models there are none or only one-sided restrictions influencing the choice of the individual. However in the traffic demand different deciding dependencies of the traffic volume with regard to the specific conditions of the territory structure potentials exist. Kichhoff and Lohse introduced bi- and tri-linearly constrained models to show these dependencies. In principle, the dependencies are described as hard, elastic and open boundary sum criteria. In this article a model is formulated which gets away from these predefined boundary sum criteria and allows a free determination of minimal and maximal boundary sum criteria. The iterative solution algorithm is shown according to a FURNESS procedure at the same time. With the approach of freely selectable minimal and maximal boundary sum criteria the modeling transport planner gets the possibility to show the traffic event even better. Furthermore all common boundary sum criteria can be calculated with this model. Therewith the often necessary and sensible standard and special cases can also be modeled.}, subject = {Architektur }, language = {en} } @inproceedings{BeranDlask, author = {Beran, V{\´a}clav and Dlask, Petr}, title = {CONSTRUCTION SPEED AND CASH FLOW OPTIMISATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2926}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29269}, pages = {10}, abstract = {Practical examples show that the improvement in cost flow and total amount of money spend in construction and further use may be cut significantly. The calculation is based on spreadsheets calculation, very easy to develop on most PC´s now a days. Construction works, are a field where the evaluation of Cash Flow can be and should be applied. Decisions about cash flow in construction are decisions with long-term impact and long-term memory. Mistakes from the distant past have a massive impact on situations in the present and into the far economic future of economic activities. Two approaches exist. The Just-in-Time (JIT) approach and life cycle costs (LCC) approach. The calculation example shows the dynamic results for the production speed in opposition to stable flow of production in duration of activities. More sophisticated rescheduling in optimal solution might bring in return extra profit. In the technologies and organizational processes for industrial buildings, railways and road reconstruction, public utilities and housing developments there are assembly procedures that are very appropriate for the given purpose, complicated research-, development-, innovation-projects are all very good aspects of these kinds of applications. The investors of large investments and all public invested money may be spent more efficiently if an optimisation speed-strategy can be calculated.}, subject = {Architektur }, language = {en} } @inproceedings{Kasparek, author = {Kasparek, Eva}, title = {CONVERGENCE OF A NEW CONSISTENT FOLDED PLATE THEORY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2972}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29724}, pages = {10}, abstract = {The design of challenging space structures frequently relies on the theory of folded plates. The models are composed of plane facets of which the bending and membrane stiffness are coupled along the folds. In conventional finite element analysis of faceted structures the continuity of the displacement field is enforced exclusively at the nodes. Since approximate solutions for transverse and for in-plane displacements are not members of the same function space, separation occurs in between the common nodes of adjacent elements. It is shown that the kinematic assumptions of Bernoulli are accounted for this incompatibility along the edges in facet models. A general answer to this problem involves substantial modification of plate and membrane theory, but a straight forward formulation can be derived for simply folded plates, structures, whose folds do not intersect. A broad class of faceted structures, including models of various curved shells, belong to this category and can be calculated consistently. The additional requirements to assure continuity concern the mapping of displacement derivatives on the edges. An appropriate finite facet element provides node and edge-oriented degrees of freedom, whose transformation to system degrees of freedom, depends on the geometric configuration at each node. The concept is implemented using conform triangular elements. To evaluate the new approach, the energy norm of representative structures for refined meshes is calculated. The focus is placed on the mathematical convergence towards reliable solutions obtained from finite volume models.}, subject = {Architektur }, language = {en} } @inproceedings{Siekierski, author = {Siekierski, Wojciech}, title = {CRITICAL STRESS ASSESSMENT IN ANGLE TO GUSSET PLATE BOLTED CONNECTION BY SIMPLIFIED FEM MODELLING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2889}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28897}, pages = {8}, abstract = {Simplified modelling of friction grip bolted connections of steel member - to - gusset plate is often applied in engineering practise. The paper deals with the simplification of pre-tensioned bolt model and simplification of load transfer within connection. Influence on normal strain (and thus stress) distribution at critical cross-section is investigated. Laboratory testing of single-angle or double-angle members - to - gusset plates bolted connections were taken as basis for numerical analysis. FE models were created using 1D and 2D elements. Angles and gusset plates were modelled with shell elements. Two methods of modelling of friction grip bolting were considered: bolt-regarding approach with 1D element systems modelling bolts and two variants of bolt-disregarding approach with special constraints over some part of member and gusset plate surfaces in contact: a) constraints over whole area of contact, b) constraints over the area around each bolt shank ("partially tied"). Modelling of friction grip bolted connections using simplified bolt modelling may be effective, especially in the case of analysis concerning elastic range only. In such a case disregarding bolts and replacing them with "partially tied" modelling seems to be more attractive. It is less time-consuming and provides results of similar accuracy in comparison to analysis utilizing simplified bolt modelling.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{HelbingKestingTreiberetal., author = {Helbing, D. and Kesting, A. and Treiber, M. and L{\"a}mmer, S. and Sch{\"o}nhof, M.}, title = {DECENTRALIZED APPROACHES TO ADAPTIVE TRAFFIC CONTROL AND AN EXTENDED LEVEL OF SERVICE CONCEPT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2910}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29107}, pages = {19}, abstract = {Traffic systems are highly complex multi-component systems suffering from instabilities and non-linear dynamics, including chaos. This is caused by the non-linearity of interactions, delays, and fluctuations, which can trigger phenomena such as stop-and-go waves, noise-induced breakdowns, or slower-is-faster effects. The recently upcoming information and communication technologies (ICT) promise new solutions leading from the classical, centralized control to decentralized approaches in the sense of collective (swarm) intelligence and ad hoc networks. An interesting application field is adaptive, self-organized traffic control in urban road networks. We present control principles that allow one to reach a self-organized synchronization of traffic lights. Furthermore, vehicles will become automatic traffic state detection, data management, and communication centers when forming ad hoc networks through inter-vehicle communication (IVC). We discuss the mechanisms and the efficiency of message propagation on freeways by short-range communication. Our main focus is on future adaptive cruise control systems (ACC), which will not only increase the comfort and safety of car passengers, but also enhance the stability of traffic flows and the capacity of the road ("traffic assistance"). We present an automated driving strategy that adapts the operation mode of an ACC system to the autonomously detected, local traffic situation. The impact on the traffic dynamics is investigated by means of a multi-lane microscopic traffic simulation. The simulation scenarios illustrate the efficiency of the proposed driving strategy. Already an ACC equipment level of 10\% improves the traffic flow quality and reduces the travel times for the drivers drastically due to delaying or preventing a breakdown of the traffic flow. For the evaluation of the resulting traffic quality, we have recently developed an extended level of service concept (ELOS). We demonstrate our concept on the basis of travel times as the most important variable for a user-oriented quality of service.}, subject = {Architektur }, language = {en} } @inproceedings{ZolotovAkimovSidorov, author = {Zolotov, Alexander B. and Akimov, Pavel and Sidorov, Vladimir}, title = {DISCRETE-CONTINUAL BOUNDARY ELEMENT METHODS OF ANALYSIS FOR TWO-DIMENSIONAL AND THREE-DIMENSIONAL STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3041}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30419}, pages = {22}, abstract = {The aim of this paper is to present so-called discrete-continual boundary element method (DCBEM) of structural analysis. Its field of application comprises buildings constructions, structures and also parts and components for the residential, commercial and un-inhabitant structures with invariability of physical and geometrical parameters in some dimensions. We should mention here in particular such objects as beams, thin-walled bars, strip foundations, plates, shells, deep beams, high-rise buildings, extensional buildings, pipelines, rails, dams and others. DCBEM comes under group of semianalytical methods. Semianalytical formulations are contemporary mathematical models which currently becoming available for realization due to substantial speed-up of computer productivity. DCBEM is based on the theory of the pseudodifferential boundary equations. Corresponding pseudodifferential operators are discretely approximated using Fourier analysis or wavelet analysis. The main DCBEM advantages against the other methods of the numerical analysis is a double reduction in dimension of the problem (discrete numerical division applied not to the full region of the interest but only to the boundary of the region cross section, as a matter of fact one is solving an one-dimensional problem with the finite step on the boundary area of the region), one has opportunities to carrying out very detailed analysis of the specific chosen zones, simplified initial data preparation, simplistic and adaptive algorithms. There are two methods to define and conduct DCBEM analysis developed - indirect (IDCBEM) and direct (DDCBEM), thus indirect like in boundary element method (BEM) applied and used little bit more than direct.}, subject = {Architektur }, language = {en} } @inproceedings{DeaconvanRooyen, author = {Deacon, Michael-John and van Rooyen, G.C.}, title = {DISTRIBUTED COLLABORATION: ENGINEERING PRACTICE REQUIREMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2941}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29410}, pages = {8}, abstract = {Designing a structure follows a pattern of creating a structural design concept, executing a finite element analysis and developing a design model. A project was undertaken to create computer support for executing these tasks within a collaborative environment. This study focuses on developing a software architecture that integrates the various structural design aspects into a seamless functional collaboratory that satisfies engineering practice requirements. The collaboratory is to support both homogeneous collaboration i.e. between users operating on the same model and heterogeneous collaboration i.e. between users operating on different model types. Collaboration can take place synchronously or asynchronously, and the information exchange is done either at the granularity of objects or at the granularity of models. The objective is to determine from practicing engineers which configurations they regard as best and what features are essential for working in a collaborative environment. Based on the suggestions of these engineers a specification of a collaboration configuration that satisfies engineering practice requirements will be developed.}, subject = {Architektur }, language = {en} } @inproceedings{EygelaarvanRooyen, author = {Eygelaar, Anton and van Rooyen, G.C.}, title = {ENGINEERING PROCESS MODEL SPECIFICATION AND RESOURCE LEVELING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2952}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29529}, pages = {18}, abstract = {The use of process models in the analysis, optimization and simulation of processes has proven to be extremely beneficial in the instances where they could be applied appropriately. However, the Architecture/Engineering/Construction (AEC) industries present unique challenges that complicate the modeling of their processes. A simple Engineering process model, based on the specification of Tasks, Datasets, Persons and Tools, and certain relations between them, have been developed, and its advantages over conventional techniques have been illustrated. Graph theory is used as the mathematical foundation mapping Tasks, Datasets, Persons and Tools to vertices and the relations between them to edges forming a directed graph. The acceptance of process modeling in AEC industries not only depends on the results it can provide, but the ease at which these results can be attained. Specifying a complex AEC process model is a dynamic exercise that is characterized by many modifications over the process model's lifespan. This article looks at reducing specification complexity, reducing the probability for erroneous input and allowing consistent model modification. Furthermore, the problem of resource leveling is discussed. Engineering projects are often executed with limited resources and determining the impact of such restrictions on the sequence of Tasks is important. Resource Leveling concerns itself with these restrictions caused by limited resources. This article looks at using Task shifting strategies to find a near-optimal sequence of Tasks that guarantees consistent Dataset evolution while resolving resource restrictions.}, subject = {Architektur }, language = {en} } @inproceedings{Kisil, author = {Kisil, Vladimir}, title = {FILLMORE-SPRINGER-CNOPS CONSTRUCTION IMPLEMENTED IN GINAC}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2974}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29744}, pages = {103}, abstract = {This is an implementation of the Fillmore-Springer-Cnops construction (FSCc) based on the Clifford algebra capacities of the GiNaC computer algebra system. FSCc linearises the linear-fraction action of the Mobius group. This turns to be very useful in several theoretical and applied fields including engineering. The core of this realisation of FSCc is done for an arbitrary dimension, while a subclass for two dimensional cycles add some 2D-specific routines including a visualisation to PostScript files through the MetaPost or Asymptote software. This library is a backbone of many result published in, which serve as illustrations of its usage. It can be ported (with various level of required changes) to other CAS with Clifford algebras capabilities.}, subject = {Architektur }, language = {en} } @inproceedings{Faustino, author = {Faustino, Nelson}, title = {FISCHER DECOMPOSITION FOR DIFFERENCE DIRAC OPERATORS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2955}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29551}, pages = {10}, abstract = {We establish the basis of a discrete function theory starting with a Fischer decomposition for difference Dirac operators. Discrete versions of homogeneous polynomials, Euler and Gamma operators are obtained. As a consequence we obtain a Fischer decomposition for the discrete Laplacian. For the sake of simplicity we consider in the first part only Dirac operators which contain only forward or backward finite differences. Of course, these Dirac operators do not factorize the classic discrete Laplacian. Therefore, we will consider a different definition of a difference Dirac operator in the quaternionic case which do factorizes the discrete Laplacian.}, subject = {Architektur }, language = {en} } @inproceedings{MusialKaminskiUbysz, author = {Musial, Michal and Kaminski, Mieczysław and Ubysz, Andrzej}, title = {FREE VIBRATION FREQUENCIES OF THE CRACKED REINFORCED CONCRETE BEAMS - METHODS OF CALCULATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2874}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28744}, pages = {8}, abstract = {The paper presents method of calculation of natural frequencies of the cracked reinforced concrete beams including discreet model of crack. The described method is based on the stiff finite elements method. It was modified in such a way as to take into account local discontinuities (ie. cracks). In addition, some theoretical studies as well as experimental tests of concrete mechanics based on discrete crack model were taken into consideration. The calculations were performed using the author's own numerical algorithm. Moreover, other calculation methods of dynamic reinforced concrete beams presented in standards and guidelines are discussed. Calculations performed by using different methods are compared with the results obtained in experimental tests.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Bilchuk, author = {Bilchuk, Irina}, title = {GEOMETRIC IDENTIFICATION OF OBJECTS IN CIVIL ENGINEERING APPLICATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2927}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29274}, pages = {21}, abstract = {Objects for civil engineering applications can be identified with their reference in memory, their alpha-numeric name or their geometric location. Particularly in graphic user interfaces, it is common to identify objects geometrically by selection with the mouse. As the number of geometric objects in a graphic user interface grows, it becomes increasingly more important to treat the basic operations add, search and remove for geometric objects with great efficiency. Guttmann has proposed the Region-Tree (R-tree) for geometric identification in an environment which uses pages on disc as data structure. Minimal bounding rectangles are used to structure the data in such a way that neighborhood relations can be described effectively. The literature shows that the parameters which influence the efficiency of the R-trees have been studied extensively, but without conclusive results. The goal of the research which is reported in this paper is to determine reliably the parameters which significantly influence the efficiency of R-trees for geometric identification in technical drawings. In order to make this investigation conclusive, it must be performed with the best available software technology. Therefore an object-oriented software for the method is developed. This implementation is tested with technical drawings containing many thousands of geometric objects. These drawings are created automatically by a stochastic generator which is incorporated into a test bed consisting of an editor and a visualisor. This test bed is used to obtain statistics for the main factors which affect the efficiency of R-trees. The investigation shows that the following main factors which affect the efficiency can be identified reliably : number of geometric objects on the drawing the minimum und maximum number of children of a node of the tree the maximum width and height of the minimal bounding rectangles of the geometric objects relative to the size of the drawing.}, subject = {Architektur }, language = {en} } @inproceedings{AhmedElSayedRashwanKamal, author = {Ahmed El-Sayed, Ahmed and Rashwan, R. A. and Kamal, A.}, title = {HADAMARD GAPS IN WEIGHTED LOGARITHMIC BLOCH SPACE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2827}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28275}, pages = {20}, abstract = {We give a sufficient and a necessary condition for an analytic function "f" on the unit disk "D" with Hadamard gap to belong to a class of weighted logarithmic Bloch space as well as to the corresponding little weighted logarithmic Bloch space under some conditions posed on the defined weight function. Also, we study the relations between the class of weighted logarithmic Bloch functions and some other classes of analytic functions by the help of analytic functions in the Hadamard gap class.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{BrackxDeSchepperDeSchepperetal., author = {Brackx, Fred and De Schepper, Hennie and De Schepper, Nele and Sommen, Frank}, title = {HERMITIAN CLIFFORD-HERMITE WAVELETS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2931}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29313}, pages = {13}, abstract = {The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.}, subject = {Architektur }, language = {en} } @inproceedings{Jahnke, author = {Jahnke, Georg}, title = {HISTORISCHE BAUSUBSTANZ IN MECKLENBURG}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2971}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29719}, pages = {11}, abstract = {Mit diesen Ausf{\"u}hrungen wird ein Beitrag zum weiteren Erhalt der historischen Bausubstanz in Mecklenburg aus der Sicht der Tragwerksanalyse geleistet. Dabei best{\"a}tigt es sich immer mehr, dass mit dem Modell der Geometrie, der Belastung und des Materials gleichberechtigte Modelle f{\"u}r eine wirklichkeitsnahe Einsch{\"a}tzung des Tragverhaltens eines Tragwerks vorliegen m{\"u}ssen. Es zeigt sich, dass dabei die besten Berechnungsprogramme nur die Ergebnisse liefern k{\"o}nnen, die mit den Eingabedaten zu erzielen sind. So hat sich der Forschungsschwerpunkt im Lehrgebiet Tragwerkslehre des FB Architektur an der Hochschule Wismar in den letzten Jahren auf die realistische Abbildung der Wechselwirkung zwischen der Bauaufnahme und der geometrischen Modellierung konzentriert. In diesem Bereich zeigen sich als Schwerpunkte die Wechselwirkung zwischen Sch{\"a}den und Tragwerksanalyse und die Wechselwirkung zwischen der aufgenommenen Geometrie und dem geometrischen Modell f{\"u}r die Tragwerksanalyse. Die F{\"u}lle der aufgenommenen Daten sind dabei in der Regel mehr hinderlich als ein Segen f{\"u}r die Tragwerksanalyse. Hier wurde gezeigt, welche und wie viele geometrische Daten f{\"u}r das geometrische Modell f{\"u}r die Tragwerksanalyse sinnvoll sind. Da die eigene Datenaufnahme relativ viel Zeit beansprucht, wurde eine "geistige" Bauaufnahme durchgef{\"u}hrt. Dazu wird der historische Planungsprozess in den einzelnen Formfindungsschritten nachvollzogen und in die virtuelle Realit{\"a}t {\"u}berf{\"u}hrt. Mit dieser Methode ergeben sich unterschiedliche Bauzust{\"a}nde und es lassen sich auch m{\"o}gliche Bauphasen abbilden. Die Tragwerksanalyse dieser virtuellen Realit{\"a}t zeigt dann m{\"o}gliche Schw{\"a}chen der Tragwerke und/oder die Notwendigkeit konstruktiver Ver{\"a}nderungen. Ein Vergleich der Ergebnisse der Tragwerksanalyse mit der Realit{\"a}t anhand des vorliegenden Datenbestands liefert die Grundlage f{\"u}r den aktuellen Handlungsbedarf. Da der Bauzustand eines Bauwerkes unter einer zeitlichen Ver{\"a}nderung steht, werden Methoden {\"u}berpr{\"u}ft, die es erm{\"o}glichen, einen einmal vorgelegten Datenbestand aufzubereiten und weiter zu verwalten.}, subject = {Architektur }, language = {de} } @inproceedings{Goettlicher, author = {G{\"o}ttlicher, Manfred}, title = {HYBRID SOLID-LIQUID MODEL FOR GRANULAR MATERIAL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2959}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29596}, pages = {20}, abstract = {Solid behavior as well as liquid behavior characterizes the flow of granular material in silos. The presented model is based on an appropriate interaction of a displacement field and a velocity field. The constitutive equations and the applied algorithm are developed from the exact solution for a standard case. The standard case evolves from a very tall vertical plane strain silo containing material that flows at a constant speed. No horizontal displacements and velocities take place. No changes regarding the field values arise in the vertical direction and in time. Tension is not allowed at any point. Coulomb friction represents the effects of the vertical walls. The interaction between the flowing material and the walls is covered by a forced boundary condition resulting in an additional matrix for the solid component as well as for the liquid component. The resulting integral equations are designed to be solved directly. Three coefficients describe the properties of the granular material. They govern elastic solid behavior in combination with viscous liquid behavior.}, subject = {Architektur }, language = {de} } @inproceedings{ErikssonKettunen, author = {Eriksson, Sirkka-Liisa and Kettunen, Jarkko}, title = {HYPERMONOGENIC POLYNOMIALS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2950}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29509}, pages = {22}, abstract = {It is well know that the power function is not monogenic. There are basically two ways to include the power function into the set of solutions: The hypermonogenic functions or holomorphic Cliffordian functions. L. Pernas has found out the dimension of the space of homogenous holomorphic Cliffordian polynomials of degree m, but his approach did not include a basis. It is known that the hypermonogenic functions are included in the space of holomorphic Cliffordian functions. As our main result we show that we can construct a basis for the right module of homogeneous holomorphic Cliffordian polynomials of degree m using hypermonogenic polynomials and their derivatives. To that end we first recall the function spaces of monogenic, hypermonogenic and holomorphic Cliffordian functions and give the results needed in the proof of our main theorem. We list some basic polynomials and their properties for the various function spaces. In particular, we consider recursive formulas, rules of differentiation and properties of linear independency for the polynomials.}, subject = {Architektur }, language = {en} } @inproceedings{GokceBrowneGokceetal., author = {Gokce, Hasan Ufuk and Browne, Donal and Gokce, Kamil Umut and Menzel, Karsten}, title = {IMPROVING ENERGY EFFICIENT OPERATION OF BUILDINGS WITH WIRELESS IT SYSTEMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2845}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28453}, pages = {19}, abstract = {Reducing energy consumption is one of the major challenges for present day and will continue for future generations. The emerging EU directives relating to energy (EU EPBD and the EU Directive on Emissions Trading) now place demands on building owners to rate the energy performance of their buildings for efficient energy management. Moreover European Legislation (Directive 2006/32/EC) requires Facility Managers to reduce building energy consumption and operational costs. Currently sophisticated building services systems are available integrating off-the-shelf building management components. However this ad-hoc combination presents many difficulties to building owners in the management and upgrade of these systems. This paper addresses the need for integration concepts, holistic monitoring and analysis methodologies, life-cycle oriented decision support and sophisticated control strategies through the seamless integration of people, ICT-devices and computational resources via introducing the newly developed integrated system architecture. The first concept was applied to a residential building and the results were elaborated to improve current building conditions.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{BrackxDeSchepperLunaElizararrasetal., author = {Brackx, Fred and De Schepper, Hennie and Luna-Elizararras, Maria Elena and Shapiro, Michael}, title = {INTEGRAL REPRESENTATIONS IN HERMITEAN CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2832}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28326}, pages = {13}, abstract = {Euclidean Clifford analysis is a higher dimensional function theory offering a refinement of classical harmonic analysis. The theory is centered around the concept of monogenic functions, i.e. null solutions of a first order vector valued rotation invariant differential operator called the Dirac operator, which factorizes the Laplacian. More recently, Hermitean Clifford analysis has emerged as a new and successful branch of Clifford analysis, offering yet a refinement of the Euclidean case; it focusses on the simultaneous null solutions, called Hermitean (or h-) monogenic functions, of two Hermitean Dirac operators which are invariant under the action of the unitary group. In Euclidean Clifford analysis, the Clifford-Cauchy integral formula has proven to be a corner stone of the function theory, as is the case for the traditional Cauchy formula for holomorphic functions in the complex plane. Previously, a Hermitean Clifford-Cauchy integral formula has been established by means of a matrix approach. This formula reduces to the traditional Martinelli-Bochner formula for holomorphic functions of several complex variables when taking functions with values in an appropriate part of complex spinor space. This means that the theory of Hermitean monogenic functions should encompass also other results of several variable complex analysis as special cases. At present we will elaborate further on the obtained results and refine them, considering fundamental solutions, Borel-Pompeiu representations and the Teoderescu inversion, each of them being developed at different levels, including the global level, handling vector variables, vector differential operators and the Clifford geometric product as well as the blade level were variables and differential operators act by means of the dot and wedge products. A rich world of results reveals itself, indeed including well-known formulae from the theory of several complex variables.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Ostrowski, author = {Ostrowski, M.}, title = {INTEGRATED MATHEMATICAL MODELLING AS A BASIS FOR DECISION MAKING IN WATER MANAGEMENT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2997}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29979}, pages = {9}, abstract = {Water resources development and management is a complex problem. It includes the design and operation of single system components, often as part of larger interrelated systems and usually on the basis of river basins. While several decades ago the dominant objective was the maximization of economic benefit, other objectives have evolved as part of the sustainable development envisaged. Today, planning and operation of larger water resources systems is practically impossible without adequate computer tools, normally being one or several models, increasingly combined with data bank management systems and multi criteria assessment procedures in decision support systems. The use of models in civil engineering already has a long history when structural engineering is considered. These design support models, however, must rather be seen as expert systems made to support the engineer with his daily work. They often have no direct link to stakeholders and the decision makers community. The scale of investigation is often much larger in water resources engineering than in structural engineering which is related to different stakeholders and decision making procedures. Still, several similarities are obvious which can be summarized as the search for a compromise solution on a complex, i.e. multiobjective and interdisciplinary decision problem. While in structural engineering e.g. aestetics, stability and energy consumption might be important evaluation criteria in addition to construction and maintenance cost other or additional criteria have to be considered in water resources planning such as political, environmental and social criteria. In this respect civil engineers tend to overemphasize technical criteria. For the future the existing expert systems should be embedded into an improved decision support shell, keeping in mind that decision makers are hardly interested in numerical modelling results. The paper will introduce into the problem and demonstrate the state of the art by means of an example.}, subject = {Architektur }, language = {en} } @inproceedings{KlawitterOstrowski, author = {Klawitter, Arne and Ostrowski, M.}, title = {INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2976}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29767}, pages = {12}, abstract = {A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes.}, subject = {Architektur }, language = {en} } @inproceedings{SchererGrinewitschus, author = {Scherer, Klaus and Grinewitschus, Viktor}, title = {INTEGRIERTE SYSTEMBEDIENUNG IN GEB{\"A}UDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3013}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30132}, pages = {7}, abstract = {R{\"a}ume und Geb{\"a}ude sind heute wegen der enormen Funktionalit{\"a}t der technischen Geb{\"a}udeausr{\"u}stung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl f{\"u}r Wohn- als auch f{\"u}r Zweckimmobilien. Die Geb{\"a}udeleittechnik (GLT) und die Geb{\"a}udeautomation (GA) k{\"o}nnen hier unter sinnvoller Integration der M{\"o}glichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsb{\"u}ndelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Geb{\"a}udeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Ger{\"a}ten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil v{\"o}llig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausr{\"u}stungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundz{\"u}ge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterf{\"u}hrende Aktivit{\"a}ten.}, subject = {Architektur }, language = {de} } @inproceedings{Franssens, author = {Franssens, Ghislain R.}, title = {INTRODUCTION TO CLIFFORD ANALYSIS OVER PSEUDO-EUCLIDEAN SPACE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2843}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28433}, pages = {16}, abstract = {An introduction is given to Clifford Analysis over pseudo-Euclidean space of arbitrary signature, called for short Ultrahyperbolic Clifford Analysis (UCA). UCA is regarded as a function theory of Clifford-valued functions, satisfying a first order partial differential equation involving a vector-valued differential operator, called a Dirac operator. The formulation of UCA presented here pays special attention to its geometrical setting. This permits to identify tensors which qualify as geometrically invariant Dirac operators and to take a position on the naturalness of contravariant and covariant versions of such a theory. In addition, a formal method is described to construct the general solution to the aforementioned equation in the context of covariant UCA.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{KimuraMakinoMaegaitoetal., author = {Kimura, Atsushi and Makino, Y. and Maegaito, Kentaro and Suzuki, Osamu}, title = {ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE (II) (THE VISUAL IMPRESSIONS GIVEN BY DESIGN-PATTERNS)}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2973}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29731}, pages = {4}, abstract = {The present study was designed to investigate the underlying factors determining the visual impressions of design-patterns that have complex textures. Design-patterns produced by "the dynamical system defined by iterations of discrete Laplacians on the plane lattice" were adopted as stimuli because they were not only complex, but also defined mathematically. In the experiment, 21 graduate and undergraduate students sorted 102 design-patterns into several groups by visual impressions. Those 102 patterns were classified into 12 categories by the cluster analysis. The results showed that the regularity of pattern was a most efficient factor for determining visual impressions of design-pattern, and there were some correspondence between visual impressions and mathematical variables of design-pattern. Especially, the visual impressions were influenced greatly by the neighborhood, and less influenced by steps of iterations.}, subject = {Architektur }, language = {en} } @inproceedings{AibaMaegaitoSuzuki, author = {Aiba, Yoshihisa and Maegaito, Kentaro and Suzuki, Osamu}, title = {Iteration dynamical systems of discrete Laplacians on the plane lattice(I) (Basic properties and computer simulations of the dynamical systems)}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2917}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29178}, pages = {3}, abstract = {In this study we introduce a concept of discrete Laplacian on the plane lattice and consider its iteration dynamical system. At first we discuss some basic properties on the dynamical system to be proved. Next making their computer simulations, we show that we can realize the following phenomena quite well:(1) The crystal of waters (2) The designs of carpets, embroideries (3) The time change of the numbers of families of extinct animals, and (4) The echo systems of life things. Hence we may expect that we can understand the evolutions and self organizations by use of the dynamical systems. Here we want to make a stress on the following fact: Although several well known chaotic dynamical systems can describe chaotic phenomena, they have difficulties in the descriptions of the evolutions and self organizations.}, subject = {Architektur }, language = {en} } @inproceedings{RueppelMeissnerLange, author = {R{\"u}ppel, Uwe and Meißner, Udo F. and Lange, Michael}, title = {KOOPERATIVE BRANDSCHUTZPLANUNG MIT SOFTWARE-AGENTEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3007}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30071}, pages = {10}, abstract = {Die effektive Kooperation aller beteiligten Fachplaner im Bauplanungsprozess ist die Voraussetzung f{\"u}r wirtschaftliches und qualitativ hochwertiges Bauen. Bauprojektorganisationen bestehen in der Regel aus zahlreichen unabh{\"a}ngigen Planungspartnern, die {\"o}rtlich verteilt spezifische Planungsaufgaben bearbeiten und die Ergebnisse in Teilproduktmodellen ablegen. Da Planungsprozesse im Bauwesen stark arbeitsteilig ablaufen, sind die Teilproduktmodelle der einzelnen Fachplanungen in hohem Maße voneinander abh{\"a}ngig. Ziel des hier vorgestellten Ansatzes ist die Integration der Teilproduktmodelle der Geb{\"a}udeplanung in einem netzwerkbasierten Modellverbund am Beispiel der Brandschutzplanung. Im Beitrag werden die Probleme der Verteiltheit und insbesondere der semantischen Heterogenit{\"a}t der involvierten Teilproduktmodelle betrachtet. Der verteilte Zugriff wird mithilfe mobiler Software-Agenten realisiert. Die Agenten k{\"o}nnen sich dabei frei im netzwerkbasierten Planungsverbund bewegen und agieren als Vertreter der Fachplaner. Das Problem der semantischen Heterogenit{\"a}t der Teilproduktmodelle wird auf der Basis von Ontologien gel{\"o}st. Dazu werden erstens Dom{\"a}nenontologien entwickelt, die Objekte der realen Welt einer abgeschlossenen Dom{\"a}ne, hier des Brandschutzes, abbilden. Zweitens werden Applikationsontologien entwickelt, die die einzelnen propriet{\"a}ren Datenhaltungen (im Sinne von Teilproduktmodellen) der jeweiligen Fachplanungen repr{\"a}sentieren. Beide Ontologien werden mit einem regelbasierten Ansatz verkn{\"u}pft. Im vorgestellten Anwendungsfall Brandschutz dient die Dom{\"a}nenontologie als einheitliche Schnittstelle f{\"u}r den Zugriff auf die verteilten Modelle und abstrahiert dabei von deren Datenbankspezifika und propriet{\"a}ren Schemata. Mithilfe von mobilen Agenten und semantischen Technologien kann so eine Plattform zur Verf{\"u}gung gestellt werden, die erstens die dynamische Integration von Ressourcen in den Planungsverbund erlaubt und zweitens auf deren Basis unabh{\"a}ngig von der Verteiltheit und Heterogenit{\"a}t der eingebundenen Ressourcen ingenieurgerechte Verarbeitungsmethoden realisiert werden k{\"o}nnen.}, subject = {Architektur }, language = {de} } @inproceedings{Stangenberg, author = {Stangenberg, Friedhelm}, title = {LIFETIME ORIENTED DESIGN CONCEPTS UNDER ASPECTS OF DEGRADATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2915}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170328-29154}, pages = {25}, abstract = {Optimum technological solutions must take into account the entire life cycle of structures including design procedures as well as quality assurance, inspection, maintenance, and repair strategies. Unfortunately, current design standards do not provide a satisfactory basis to ensure expected structural lifetimes. The latter may vary from only a few years for temporary structures to over a century for bridges, water dams or nuclear repositories. Consistent scientific concepts are urgently required to cover this wide spectrum of lifetimes in structural design and maintenance. This was a motivation for a group of scientists at the Ruhr-University Bochum (RUB) to start a special research program supported by the German Research Foundation (DFG) within the Cooperative Research Center SFB 398 since 1996. Institutes of the University Wuppertal and of the University Essen-Duisburg joined the research group. The goal of the Center is to study sources of damage and deterioration in materials and structures, to develop consistent models and simulation methods, to predict structural lifetimes and finally to integrate this predictions into new lifetime-oriented design strategies. Research activities in our center are organised in three Project Groups as follows: - Modelling of lifetime effects - Methods for lifetime-oriented structural analyses - Future lifespan-oriented design strategies.}, subject = {Architektur }, language = {en} } @inproceedings{GalffyBaitschWellmannJelicetal., author = {Galffy, Mozes and Baitsch, Matthias and Wellmann Jelic, Andres and Hartmann, Dietrich}, title = {LIFETIME-ORIENTED OPTIMIZATION OF BRIDGE TIE RODS EXPOSED TO VORTEX-INDUCED ACROSS-WIND VIBRATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2956}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29561}, pages = {12}, abstract = {In recent years, damages in welded connections plates of vertical tie rods of several arched steel bridges have been reported. These damages are due to fatigue caused by wind-induced vibrations. In the present study, such phenomena are examined, and the corresponding lifetime of a reference bridge in M{\"u}nster-Hiltrup, Germany, is estimated, based on the actual shape of the connection plate. Also, the results obtained are compared to the expected lifetime of a connection plate, whose geometry has been optimized separately. The structural optimization, focussing on the shape of the cut at the hanger ends, has been carried out using evolution strategies. The oscillation amplitudes have been computed by means of the Newmark-Wilson time-step method, using an appropriate load model, which has been validated by on-site experiments on the selected reference bridge. Corresponding stress-amplitudes are evaluated by multiplying the oscillation amplitudes with a stress concentration factor. This factor has been computed on the basis of a finite element model of the system "hanger-welding-connection plate", applying solid elements, according to the notch stress approach. The damage estimation takes into account the stochastics of the exciting wind process, as well as the stochastics of the material parameters (fatigue strength) given in terms of Woehler-curves. The shape optimization results in a substantial increase of the estimated hanger lifetime. The comparison of the lifetimes of the bulk plate and of the welding revealed that, in the optimized structure, the welding, being the most sensitive part in the original structure, shows much more resistance against potential damages than the bulk material.}, subject = {Architektur }, language = {en} } @inproceedings{Eickelkamp, author = {Eickelkamp, Jens Peter}, title = {LIQUIDIT{\"A}TSPLANUNG VON BAUPROJEKTEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2948}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29483}, pages = {12}, abstract = {Die Liquidit{\"a}tsplanung von Bauunternehmen XE "Liquidit{\"a}tsplanung" gilt als ein wesentliches Steuerungs-, Kontroll- sowie Informationsinstrument f{\"u}r interne und externe Adressaten und {\"u}bt eine Entscheidungsunterst{\"u}tzungsfunktion aus. Da die einzelnen Bauprojekte einen wesentlichen Anteil an den Gesamtkosten des Unternehmens ausmachen, besitzen diese auch einen erheblichen Einfluß auf die Liquidit{\"a}t und die Zahlungsf{\"a}higkeit der Bauunternehmung. Dem folgend ist es in der Baupraxis eine {\"u}bliche Verfahrensweise, die Liquidit{\"a}tsplanung zuerst projektbezogen zu erstellen und anschließend auf Unternehmensebene zu verdichten. Ziel der Ausf{\"u}hrungen ist es, die Zusammenh{\"a}nge von Arbeitskalkulation XE "Arbeitskalkulation" , Ergebnisrechnung XE "Ergebnisrechnung" und Finanzrechnung XE "Finanzrechnung" in Form eines deterministischen XE "Erkl{\"a}rungsmodells" Planungsmodells auf Projektebene darzustellen. Hierbei soll das Verst{\"a}ndnis und die Bedeutung der Verkn{\"u}pfungen zwischen dem technisch-orientierten Bauablauf und dessen Darstellung im Rechnungs- und Finanzwesen herausgestellt werden. Die Vorg{\"a}nge aus der Bauabwicklung, das heißt die Abarbeitung der Bauleistungsverzeichnispositionen und deren zeitliche Darstellung in einem Bauzeitenplan sind periodisiert in Gr{\"o}ßen der Betriebsbuchhaltung (Leistung, Kosten) zu transformieren und anschließend in der Finanzrechnung (Einzahlungen., Auszahlungen) nach Kreditoren und Debitoren aufzuschl{\"u}sseln.}, subject = {Architektur }, language = {de} } @inproceedings{SzarataStarostina, author = {Szarata, Andrzej and Starostina, T.}, title = {MAMDANI'S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3025}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30257}, pages = {1}, abstract = {This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology.}, subject = {Architektur }, language = {en} } @inproceedings{MalonekFalcaoSilva, author = {Malonek, Helmuth Robert and Falc{\~a}o, M. Irene and Silva, Ant{\´o}nio}, title = {MAPLE TOOLS FOR MODIFIED QUATERNIONIC ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2953}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29535}, pages = {7}, abstract = {At the 16th IKM Bock, Falc{\~a}o and G{\"u}rlebeck presented examples of the application of some specially developed Maple-Software in hypercomplex analysis. Other papers of those authors continued this work and showed the efficiency of such tools for concrete numerical calculations as well as for numerical experiments, supporting the detection of new relationships and even theorems in a highly technical theoretical work. The mentioned software has been developed mainly for the use on mapping problems in the Euclidean spaces of dimension 3 and 4 by means of Bergman kernel methods (BKM), which are related to monogenic functions as solutions of generalized Cauchy-Riemann equations with respect to the Euclidean metric (Riesz system). The developed procedures concerning generalized powers of totally regular variables and the corresponding homogeneous polynomials basically rely on results and conventions introduced in the paper "Power series representation for monogenic functions in Rm+1 based on a permutational product", Complex Variables, 15, No.3, 181-191 (1990) by H. Malonek. Since 1992 H. Leutwiler, S. L. Eriksson and others developed in a number of papers a modified Clifford analysis and, particularly, a modified quaternionic analysis. The modification mainly consists in considering generalized Cauchy-Riemann equations with respect to a hyperbolic metric in a half space. The aim of this contribution is to show how through a change of the basic combinatorial relations used in the modified quaternionic analysis the aforementioned Maple-software (that has been recently published on CD-Rom as integrated part of the text book "Funktionentheorie in der Ebene und im Raum" by K. G{\"u}rlebeck, K. Habetha, and W. Spr{\"o}ssig, in the series "Grundstudium Mathematik" of Birkh{\"a}user Verlag, 2006) can directly be used for numerical calculations in the modified theory.}, subject = {Architektur }, language = {en} } @inproceedings{Ubysz, author = {Ubysz, Andrzej}, title = {MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3029}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30294}, pages = {7}, abstract = {The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro-creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well.}, subject = {Architektur }, language = {en} } @inproceedings{MusialUbyszUlatowski, author = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr}, title = {METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2996}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29965}, pages = {8}, abstract = {The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns.}, subject = {Architektur }, language = {en} } @inproceedings{ChudobaScholzenHegger, author = {Chudoba, Rostislav and Scholzen, A. and Hegger, Josef}, title = {MICROPLANE MODEL WITH INITIAL AND DAMAGE-INDUCED ANISOTROPY APPLIED TO TEXTILE-REINFORCED CONCRETE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2836}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28367}, pages = {8}, abstract = {The presented material model reproduces the anisotropic characteristics of textile reinforced concrete in a smeared manner. This includes both the initial anisotropy introduced by the textile reinforcement, as well as the anisotropic damage evolution reflecting fine patterns of crack bridges. The model is based on the microplane approach. The direction-dependent representation of the material structure into oriented microplanes provides a flexible way to introduce the initial anisotropy. The microplanes oriented in a yarn direction are associated with modified damage laws that reflect the tension-stiffening effect due to the multiple cracking of the matrix along the yarn.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{BartelsZimmermann, author = {Bartels, Jan-Hendrik and Zimmermann, J{\"u}rgen}, title = {MINIMIZING THE TOTAL DISCOUNTED COST OF DISMANTLING A NUCLEAR POWER PLANT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2920}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29200}, pages = {9}, abstract = {Due to economical, technical or political reasons all over the world about 100 nuclear power plants have been disconnected until today. All these power stations are still waiting for their complete dismantling which, considering one reactor, causes cost of up to one Bil. Euros and lasts up to 15 years. In our contribution we present a resource-constrained project scheduling approach minimizing the total discounted cost of dismantling a nuclear power plant. A project of dismantling a nuclear power plant can be subdivided into a number of disassembling activities. The execution of these activities requires time and scarce resources like manpower, special equipment or storage facilities for the contaminated material arising from the dismantling. Moreover, we have to regard several minimum and maximum time lags (temporal constraints) between the start times of the different activities. Finally, each disassembling activity can be processed in two alternative execution modes, which lead to different disbursements and determine the resource requirements of the considered activity. The optimization problem is to determine a start time and an execution mode for each activity, such that the discounted cost of the project is minimum, and neither the temporal constraints are violated nor the activities' resource requirements exceed the availability of any scarce resource at any point in time. In our contribution we introduce an appropriate multi-mode project scheduling model with minimum and maximum time lags as well as renewable and cumulative resources for the described optimization problem. Furthermore, we show that the considered optimization problem is NP-hard in the strong sense. For small problem instances, optimal solutions can be gained from a relaxation based enumeration approach which is incorporated into a branch and bound algorithm. In order to be able to solve large problem instances, we also propose a truncated version of the devised branch and bound algorithm.}, subject = {Architektur }, language = {en} } @inproceedings{Klauer, author = {Klauer, Thomas}, title = {MOBILE FACILITY MANAGEMENT ZUR INSPEKTION UND INSTANDHALTUNG VON INGENIEURBAUWERKEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2975}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29759}, pages = {10}, abstract = {In diesem Beitrag wird eine mobile Software-Komponente zur Vor-Ort-Unterst{\"u}tzung von Bauwerkspr{\"u}fungen gem{\"a}ß DIN 1076 „Ingenieurbauwerke im Zuge von Strassen und Wegen, {\"U}berwachung und Pr{\"u}fung" vorgestellt, welche sich im praktischen Einsatz bei der Hochbahn AG Hamburg befindet. Mit Hilfe dieses Werkzeugs kann die Aktivit{\"a}t am Bauwerk in den gesamten softwaregest{\"u}tzten Gesch{\"a}ftsprozess der auwerksinstandhaltung integriert und somit die Bearbeitungszeit einer Bauwerkspr{\"u}fung von der Vorbereitung bis zur Pr{\"u}fbericht-Erstellung reduziert werden. Die Technologie des Mobile Computing wird unter Ber{\"u}cksichtigung spezieller fachlicher Randbedingungen, wie z.B. dem Einsatzort unter freiem Himmel, erl{\"a}utert und es werden Methoden zur effizienten Datenerfassung mit Stift und Sprache vorgestellt und bewertet. Ferner wird die Einschr{\"a}nkung der Hardware durch die geringere Gr{\"o}ße der Endger{\"a}te, die sich durch die Bedingung der Mobilit{\"a}t ergibt, untersucht.}, subject = {Architektur }, language = {de} } @inproceedings{BauerKandlerWeiss, author = {Bauer, Marek and Kandler, A. and Weiß, Hendrik}, title = {MODEL OF TRAM LINE OPERATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2921}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29217}, pages = {11}, abstract = {From passenger's perspective punctuality is one of the most important features of trams operations. Unfortunately in most cases this feature is only insufficiently fulfilled. In this paper we present a simulation model for trams operation with special focus on punctuality. The aim is to get a helpful tool for designing time-tables and for analyzing the effects by changing priorities for trams in traffic lights respectively the kind of track separation. A realization of trams operations is assumed to be a sequence of running times between successive stops and times spent by tram at the stops. In this paper the running time is modeled by the sum of its mean value and a zero-mean random variable. With the help of multiple regression we find out that the average running time is a function depending on the length of the sections and the number of intersections. The random component is modeled by a sum of two independent zero-mean random variables. One of these variables describes the disturbance caused by the process of waiting at an intersection and the other the disturbance caused by the process of driving. The time spent at a stop is assumed to be a random variable, too. Its distribution is estimated from given measurements of these stop times for different tram lines in Krak{\´o}w. Finally a special case of the introduced model is considered and numerical results are presented. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.}, subject = {Architektur }, language = {en} } @inproceedings{WittwerBecker, author = {Wittwer, Christof and Becker, Rainer}, title = {MODELLBASIERTE ERTRAGSKONTROLLE F{\"U}R PV ANLAGEN IN VERNETZTEN GEB{\"A}UDEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3036}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30363}, pages = {5}, abstract = {Subject of the paper is the realisation of a model based efficiency control system for PV generators using a simulation model. A standard 2-diodes model of PV generator is base of the ColSim model, which is implemented in ANSI C code for flexible code exporting. The algorithm is based on discretisized U-I characteristics, which allows the calculation of string topologies witch parallel and serial PV cells and modules. Shadowing effects can be modelled down to cell configuration using polar horizon definitions. The simulation model was ported to a real time environment, to calculate the efficiency of a PV system. Embedded System technology allows the networked operation and the integration of standard I/O devices. Futher work focus on the adaption of shadowing routine, which will be adapted to get the environment conditions from the real operation.}, subject = {Architektur }, language = {de} } @inproceedings{RogożaStachonUbysz, author = {Rogoża, Agnieszka and Stachon, T. and Ubysz, Andrzej}, title = {MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3005}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30050}, pages = {6}, abstract = {The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation.}, subject = {Architektur }, language = {en} } @inproceedings{Geyer, author = {Geyer, Philipp}, title = {MODELS FOR MULTIDISCIPLINARY DESIGN OPTIMIZATION: AN EXEMPLARY OFFICE BUILDING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2957}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29574}, pages = {10}, abstract = {The mathematical and technical foundations of optimization have been developed to a large extent. In the design of buildings, however, optimization is rarely applied because of insufficient adaptation of this method to the needs of building design. The use of design optimization requires the consideration of all relevant objectives in an interactive and multidisciplinary process. Disciplines such as structural, light, and thermal engineering, architecture, and economics impose various objectives on the design. A good solution calls for a compromise between these often contradictory objectives. This presentation outlines a method for the application of Multidisciplinary Design Optimization (MDO) as a tool for the designing of buildings. An optimization model is established considering the fact that in building design the non-numerical aspects are of major importance than in other engineering disciplines. A component-based decomposition enables the designer to manage the non-numerical aspects in an interactive design optimization process. A fa{\c{c}}ade example demonstrates a way how the different disciplines interact and how the components integrate the disciplines in one optimization model. In this grid-based fa{\c{c}}ade example, the materials switch between a discrete number of materials and construction types. For light and thermal engineering, architecture, and economics, analysis functions calculate the performance; utility functions serve as an important means for the evaluation since not every increase or decrease of a physical value improves the design. For experimental purposes, a genetic algorithm applied to the exemplary model demonstrates the use of optimization in this design case. A component-based representation first serves to manage non-numerical characteristics such as aesthetics. Furthermore, it complies with usual fabrication methods in building design and with object-oriented data handling in CAD. Therefore, components provide an important basis for an interactive MDO process in building design.}, subject = {Architektur }, language = {en} } @inproceedings{RichterIlzigRudnicki, author = {Richter, Matthias and Ilzig, Katrin and Rudnicki, Andrzej}, title = {MODELS FOR THE BUS HEADWAY DISTRIBUTION IN THE FLOW BEHIND A TRAFFIC SIGNAL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2852}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28521}, pages = {17}, abstract = {Several results concerning the distribution of the headway of busses in the flow behind a traffic signal are presented. In the main focus of interest is the description of analytical models, which are verified by the results of Monte-Carlo-Methods. The advantage of analytical models (verified, but not derived by simulation methods) is their flexibility with respect to possible generalizations. For instance, several random distributions of the flow incoming to the traffic signal can be compared. The attention will be directed at the question, how the primary headway H (analyzed in front of the traffic signal) is mapped to the headway H' analyzed behind of the traffic signal and how the random distribution of H is mapped to that of H'. For the traffic flow in front of the traffic signal several models will be discussed. The first case considers the situation, that busses operate on a common lane with the individual motor car traffic and the traffic flow is saturated. In the second situation, busses operate on a separated bus lane. Moreover, a mixed situation is discussed to model as close to reality as possible.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{HuhntRichter, author = {Huhnt, Wolfgang and Richter, Sven}, title = {Modification Management for Planning and Construction Processes}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2851}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28510}, pages = {13}, abstract = {Planning and construction processes are characterized by the peculiarity that they need to be designed individually for each project. It is necessary to set up an individual schedule for each project. As a basis for a new project, schedules from already finished projects are used, but adaptions are always necessary. In practice, scheduling tools only document a process. Schedules cover a set of activities, their duration and a set of interdependencies between activities. The design of a process is up to the user. It is not necessary to specify each interdependency, and completeness and correctness need to be checked manually. No methodologies are available to guarantee properties such as correctness or completeness. The considerations presented in the paper are based on an approach where a planning and a construction process including the interdependencies between planning and construction activities are regarded as a result. Selected information need to be specified by a user, and a proposal for an order of planning and construction activities is computed. As a consequence, process properties such as correctness and completeness can be guaranteed with respect to user input. Especially in Germany, clients are allowed to modify their requirements at any time. This leads to modifications in the planning and construction processes. This paper covers a mathematical formulation for this problem based on set theory. A complex structure is set up covering objects and relations; and operations are defined that guarantee consistency in the underlying and versioned process description. The presented considerations are based on previous work. This paper can be regarded as the next step in a series of previous work describing how a suitable concept for handling, planning and construction processes in civil engineering can be formed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Traversoni, author = {Traversoni, Leonardo}, title = {MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3027}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30274}, pages = {8}, abstract = {We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic {\O}lms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras.}, subject = {Architektur }, language = {en} } @inproceedings{LeRueppel, author = {Le, Hanh Quang and R{\"u}ppel, Uwe}, title = {MULTI-SITE CONSTRUCTION PROJECT SCHEDULING CONSIDERING RESOURCE MOVING TIME IN DEVELOPING COUNTRIES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2867}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28671}, pages = {15}, abstract = {Under the booming construction demands in developing countries, particularly in Vietnam situation, construction contractors often perform multiple concurrent projects in different places. In construction project scheduling processes, the existing scheduling methods often assume the resource moving time between activities/projects to be negligible. When multiple projects are deployed in different places and far from each other, this assumption has many shortcomings for properly modelling the real-world constraints. Especially, with respect to developing countries such as the Vietnam which contains transportation systems that are still in backward and low technical standards. This paper proposes a new algorithm named Multi-Site Construction Project Scheduling - MCOPS. The objective of this algorithm is to solve the problem of minimising multi-site construction project duration under limited available conditions of renewable resources (labour, machines and equipment) combining with the moving time of required resource among activities/projects. Additionally, in order to mitigate the impact of resource moving time into the multi-site project duration, this paper proposed a new priority rule: Minimum Resource Moving Time (MinRMT). The MinRMT is applied to rank the finished activities according to a priority order, to support the released resources to the scheduling activities. In order to investigate the impact of the resource moving time among activities during the scheduling process, computational experimentation was implemented. The results of the MCOPS-based computational experiments showed that, the resource moving time among projects has significantly impacted the multi-site project durations and this amount of time can not be ignored in the multi-site project scheduling process. Besides, the efficient application of the MinRMT is also demonstrated through the achieved results of the computational experiment in this paper. Though the efforts in this paper are based on the Vietnamese construction conditions, the proposed method can be usefully applied in other developing countries which have similar construction conditions.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MelnikovSemenov, author = {Melnikov, B. E. and Semenov, Artem}, title = {MULTILEVEL COMPUTATION IN CIVIL ENGINEERING BASED ON MULTIMODEL ELASTO-PLASTIC ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2991}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29911}, pages = {11}, abstract = {Requires for reliability and durability of structures and their elements with simultaneous material economy have stimulated improvement of constitutive equations for description of elasto-plastic deformation processes. This has led to the development of phenomenological modelling of complex phenomena of irreversible deformation including history-dependent and rate-dependent effects. During the last several decades many works have been devoted to the development of elasto-plastic models, in order to better predict the material behavior under combined variable thermo-mechanical loading. The increase of accuracy of stress analysis and safety factors for complex structures with the help of modern finite-element packages (ABAQUS, ANSYS, COSMOS, LS-DYNA, MSC.MARC, MSC.NASTRAN, PERMAS and other) can be provided only by use of complex and special variants of plasticity theories, which are adequate for the considered loading conditions and based on authentic information about properties of materials. The areas of application of the various theories (models) are as a rule unknown to the users of finite-element packages at the existing variety loading condition sin machine-building designs. At the moment a universal theory of inelasticity is absent and even the most accomplished theories can not guarantee adequate description of deformation processes for arbitrary structure under wide range of loading programs. The classifier of materials, loading conditions, effects (phenomena) and list of basic experiments are developed by the authors. Use of these classifiers for an establishment of hierarchy of models is a first step for introduction of the multimodel analysis into computational practice. The set of the classic and modern inelasticity theories is considered, so that they are applicable for stress analysis of structures under complex loading programs. Among them there are plastic flow theories with linear and nonlinear isotropic and kinematic hardening, multisurface theories, endochronic theory, holonomic theory, rheologic models, theory of elasto-plastic processes, slip theory, physical theories (single crystal and polycrystalline models) and others. The classification of materials provides rearranging by a degree of homogeneous, chemical composition, level of strength and plasticity, behavior under cyclic loading, anisotropy of properties at initial condition, anisotropy of properties during deformation process, structural stability. The classification of loading conditions takes into consideration proportional and non-proportional loading, temperature range, combination of cyclic and monotonous loading, one-axial, two-axial and complex stress state, curvature of strain path, presence of stress concentrators and level of strain gradient. A unified general form of constitutive equations is presented for all used material models based upon the concept of internal state variables. The wide range of mentioned above inelastic material models has been implemented into finite element program PANTOCRATOR developed by authors (see for details www.pantocrator.narod.ru). Application possibility of different material models is considered both for material element and for complex structures subjected to complex non-proportional loading.}, subject = {Architektur }, language = {en} } @inproceedings{Kunoth, author = {Kunoth, Angela}, title = {MULTISCALE ANALYSIS OF MULTIVARIATE DATA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2864}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28644}, pages = {20}, abstract = {For many applications, nonuniformly distributed functional data is given which lead to large-scale scattered data problems. We wish to represent the data in terms of a sparse representation with a minimal amount of degrees of freedom. For this, an adaptive scheme which operates in a coarse-to-fine fashion using a multiscale basis is proposed. Specifically, we investigate hierarchical bases using B-splines and spline-(pre)wavelets. At each stage a leastsquares approximation of the data is computed. We take into account different requests arising in large-scale scattered data fitting: we discuss the fast iterative solution of the least square systems, regularization of the data, and the treatment of outliers. A particular application concerns the approximate continuation of harmonic functions, an issue arising in geodesy.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MeschkeGrytz, author = {Meschke, G{\"u}nther and Grytz, Rafael}, title = {MULTISCALE MODELING AND COMPUTATIONAL REMODELING OF HUMAN EYE TISSUES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2871}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28712}, pages = {7}, abstract = {A stress based remodeling approach is used to investigate the sensitivity of the collagen architecture in humane eye tissues on the biomechanical response of the lamina cribrosa with a particular focus on the stress environment of the nerve fibers. This approach is based on a multi-level biomechanical framework, where the biomechanical properties of eye tissues are derived from a single crimped fibril at the micro-scale via the collagen network of distributed fibrils at the meso-scale to the incompressible and anisotropic soft tissue at the macro-scale. Biomechanically induced remodeling of the collagen network is captured on the meso-scale by allowing for a continuous reorientation of collagen fibrils. To investigate the multi-scale phenomena related to glaucomatous neuropathy a generalized computational homogenization scheme is applied to a coupled two-scale analysis of the human eye considering a numerical macro- and meso-scale model of the lamina cribrosa.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Rohr, author = {Rohr, Stefan}, title = {NEUE M{\"O}GLICHKEITEN IN DER ABLAUFPLANUNG DURCH DIE EREIGNISORIENTIERTE SIMULATION VON PRODUKTIONSPROZESSEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30060}, pages = {63}, abstract = {Durch die Betrachtung des Produktions-Prozesses als zentrales Transformationselement wird die Struktur der Bauproduktion realit{\"a}tsnah gefasst. Die Integration der prozessorientierten Kostendefinition setzt relevante Kostenparameter und Produktionsfaktoren so in Beziehung, dass sie im Einklang mit der realen Kostenstruktur und Kostendynamik einer Baustelle stehen. Die Beziehung zwischen Bauzeit und Kosten wird direkt erfasst und ausgewertet. Der hohen Dynamik der Bauproduktion zwischen kapazit{\"a}tsbeschr{\"a}nkten Einsatzmitteln und Produktionsprozessen wurde durch das Poolmodell und der Simulation als Berechnungsmethode Rechnung getragen. Eine einfache Modellierung von sich zyklusartig wiederholenden Arbeitsvorg{\"a}ngen (Taktplanung) ist m{\"o}glich. Die Taktbildung vollzieht sich bei der Simulation durch Kapazit{\"a}tsbeschr{\"a}nkungen ohne Zutun des Benutzers. Durch eine Optimierungsmethode kann automatisiert nach der kosteng{\"u}nstigsten oder zeitlich schnellsten Produktionsvariante gesucht werden}, subject = {Architektur }, language = {de} } @inproceedings{Kravchenko, author = {Kravchenko, Vladislav}, title = {NEW APPLICATIONS OF PSEUDOANALYTIC FUNCTION THEORY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2983}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29835}, pages = {3}, abstract = {We show a close relation between the Schr{\"o}dinger equation and the conductivity equation to a Vekua equation of a special form. Under quite general conditions we propose an algorithm for explicit construction of pseudoanalytic positive formal powers for the Vekua equation that as a consequence gives us a complete system of solutions for the Schr{\"o}dinger and the conductivity equations. Besides the construction of complete systems of exact solutions for the above mentioned second order equations and the Dirac equation, we discuss some other applications of pseudoanalytic function theory.}, subject = {Architektur }, language = {en} } @inproceedings{Wolff, author = {Wolff, Sebastian}, title = {NODALLY INTEGRATED FINITE ELEMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2902}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29028}, pages = {16}, abstract = {Nodal integration of finite elements has been investigated recently. Compared with full integration it shows better convergence when applied to incompressible media, allows easier remeshing and highly reduces the number of material evaluation points thus improving efficiency. Furthermore, understanding it may help to create new integration schemes in meshless methods as well. The new integration technique requires a nodally averaged deformation gradient. For the tetrahedral element it is possible to formulate a nodal strain which passes the patch test. On the downside, it introduces non-physical low energy modes. Most of these "spurious modes" are local deformation maps of neighbouring elements. Present stabilization schemes rely on adding a stabilizing potential to the strain energy. The stabilization is discussed within this article. Its drawbacks are easily identified within numerical experiments: Nonlinear material laws are not well represented. Plastic strains may often be underestimated. Geometrically nonlinear stabilization greatly reduces computational efficiency. The article reinterpretes nodal integration in terms of imposing a nonconforming C0-continuous strain field on the structure. By doing so, the origins of the spurious modes are discussed and two methods are presented that solve this problem. First, a geometric constraint is formulated and solved using a mixed formulation of Hu-Washizu type. This assumption leads to a consistent representation of the strain energy while eliminating spurious modes. The solution is exact, but only of theoretical interest since it produces global support. Second, an integration scheme is presented that approximates the stabilization criterion. The latter leads to a highly efficient scheme. It can even be extended to other finite element types such as hexahedrals. Numerical efficiency, convergence behaviour and stability of the new method is validated using linear tetrahedral and hexahedral elements.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{PaolucciVenturino, author = {Paolucci, Anna Maria and Venturino, Ezio}, title = {NONLINEAR DYNAMICS AND WAVELETS IN DISCRETE BIOMATHEMATICAL MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2998}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29984}, pages = {25}, abstract = {A discrete ecoepidemiological model is considered. Its dynamics is studied by using wavelet decomposition.}, subject = {Architektur }, language = {en} } @inproceedings{EbertBernsteinCerejeirasetal., author = {Ebert, Svend and Bernstein, Swanhild and Cerejeiras, Paula and K{\"a}hler, Uwe}, title = {NONZONAL WAVELETS ON S^N}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2840}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28406}, pages = {18}, abstract = {In the present article we will construct wavelets on an arbitrary dimensional sphere S^n due the approach of approximate Identities. There are two equivalently approaches to wavelets. The group theoretical approach formulates a square integrability condition for a group acting via unitary, irreducible representation on the sphere. The connection to the group theoretical approach will be sketched. The concept of approximate identities uses the same constructions in the background, here we select an appropriate section of dilations and translations in the group acting on the sphere in two steps. At First we will formulate dilations in terms of approximate identities and than we call in translations on the sphere as rotations. This leads to the construction of an orthogonal polynomial system in L²(SO(n+1)). That approach is convenient to construct concrete wavelets, since the appropriate kernels can be constructed form the heat kernel leading to the approximate Identity of Gauss-Weierstra\ss. We will work out conditions to functions forming a family of wavelets, subsequently we formulate how we can construct zonal wavelets from a approximate Identity and the relation to admissibility of nonzonal wavelets. Eventually we will give an example of a nonzonal Wavelet on \$S^n\$, which we obtain from the approximate identity of Gauss-Weierstraß.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{UbyszMajStachonetal., author = {Ubysz, Andrzej and Maj, Marek and Stachon, T. and Rogoza, Agnieszka}, title = {NUMERICAL ANALYSIS OF STRESS DISTRIBUTION IN THE REINFORCED CONCRETE SUPPORT BEAM BRACKET EXPOSED TO DAMAGE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2869}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28693}, pages = {11}, abstract = {The article presents analysis of stress distribution in the reinforced concrete support beam bracket which is a component of prefabricated reinforced concrete building. The building structure is spatial frame where dilatations were applied. The proper stiffness of its structure is provided by frames with stiff joints, monolithic lift shifts and staircases. The prefabricated slab floors are supported by beam shelves which are shaped as inverted letter 'T'. Beams are supported by the column brackets. In order to lower the storey height and fulfill the architectural demands at the same time, the designer lowered the height of beam at the support zone. The analyzed case refers to the bracket zone where the slant crack. on the support beam bracket was observed. It could appear as a result of overcrossing of allowable tension stresses in reinforced concrete, in the bracket zone. It should be noted that the construction solution applied, i.e. concurrent support of the "undercut" beam on the column bracket causes local concentration of stresses in the undercut zone where the strongest transverse forces and tangent stresses occur concurrently. Some additional rectangular stresses being a result of placing the slab floors on the lower part of beam shelves sum up with those described above.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{RogozaUbysz, author = {Rogoza, Agnieszka and Ubysz, Andrzej}, title = {NUMERICAL ANALYSIS OF THE CRACKED REINFORCED CONCRETE BEAMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2883}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28835}, pages = {8}, abstract = {We present the way of calculation of displacement in the bent reinforced concrete bar elements where rearrangement of internal forces and plastic hinge occurred. The described solution is based on prof. Borcz's mathematical model. It directly takes into consideration the effects connected with the occurrence of plastic hinge, such as for example a crack, by means of a differential equation of axis of the bent reinforced concrete beam. The EN Eurocode 2 makes it possible to consider the influence of plastic hinge on the values of the reinforced concrete structures. This influence can also be assumed using other analytical methods. However, the results obtained by the application of Eurocode 2 are higher from those received in testing. Just comparably big error level occurs when calculations are made by means of Borcz's method, but in the latter case, the results depend on the assumptions made beforehand. This method makes it possible to apply the experimental results using parameters r1 i r0. When the experimental results are taken into account, one could observe the compatibility between the calculations and actual deflections of the structure.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{NguyenTuanDatchevaSchanz, author = {Nguyen-Tuan, Long and Datcheva, Maria and Schanz, Tom}, title = {NUMERICAL SIMULATION AND INVERSE ANALYSIS OF THERMO-HYDRO-MECHANICAL BEHAVIOR OF SAND-BENTONITE MIXTURE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2876}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28767}, pages = {18}, abstract = {Sand-bentonite mixtures are well recognized as buffer and sealing material in nuclear waste repository constructions. The behaviour of compacted sand-bentonite mixture needs to be well understood in order to guarantee the safety and the efficiency of the barrier construction. This paper presents numerical simulations of swelling test and coupled thermo-hydro-mechanical (THM) test on compacted sand-bentonite mixture in order to reveal the influence of the temperature and hydraulic gradients on the distribution of temperature, mechanical stress and water content in such materials. Sensitivity analysis is carried out to identify the parameters which influence the most the response of the numerical model. Results of back analysis of the model parameters are reported and critically assessed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Tomaz, author = {Tomaz, Gra{\c{c}}a Maria}, title = {ON BLOCK MATRICES OF PASCAL TYPE IN CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2897}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28979}, pages = {8}, abstract = {Since the 90-ties the Pascal matrix, its generalizations and applications have been in the focus of a great amount of publications. As it is well known, the Pascal matrix, the symmetric Pascal matrix and other special matrices of Pascal type play an important role in many scientific areas, among them Numerical Analysis, Combinatorics, Number Theory, Probability, Image processing, Sinal processing, Electrical engineering, etc. We present a unified approach to matrix representations of special polynomials in several hypercomplex variables (new Bernoulli, Euler etc. polynomials), extending results of H. Malonek, G.Tomaz: Bernoulli polynomials and Pascal matrices in the context of Clifford Analysis, Discrete Appl. Math. 157(4)(2009) 838-847. The hypercomplex version of a new Pascal matrix with block structure, which resembles the ordinary one for polynomials of one variable will be discussed in detail.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Shapiro, author = {Shapiro, Michael}, title = {ON HYPERHOLOMORPHIC POLYNOMIALS FOR THE CAUCHY-RIEMANN AND THE DIRAC OPERATORS OF CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3020}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30201}, pages = {1}, abstract = {Clifford Analysis, hyperholomorphic polynomials, Taylor Series.}, subject = {Architektur }, language = {en} } @inproceedings{Soucek, author = {Soucek, Vladimir}, title = {ON MASSLESS FIELD EQUATION IN HIGHER DIMENSIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2892}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28925}, pages = {13}, abstract = {The paper is devoted to a study of properties of homogeneous solutions of massless field equation in higher dimensions. We first treat the case of dimension 4. Here we use the two-component spinor language (developed for purposes of general relativity). We describe how are massless field operators related to a higher spin analogues of the de Rham sequence - the so called Bernstein-Gel'fand-Gel'fand (BGG) complexes - and how are they related to the twisted Dirac operators. Then we study similar question in higher (even) dimensions. Here we have to use more tools from representation theory of the orthogonal group. We recall the definition of massless field equations in higher dimensions and relations to higher dimensional conformal BGG complexes. Then we discuss properties of homogeneous solutions of massless field equation. Using some recent techniques for decomposition of tensor products of irreducible \$Spin(m)\$-modules, we are able to add some new results on a structure of the spaces of homogenous solutions of massless field equations. In particular, we show that the kernel of the massless field equation in a given homogeneity contains at least on specific irreducible submodule.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Randrianarivony, author = {Randrianarivony, Maharavo}, title = {ON THE GENERATION OF HIERARCHICAL MESHES FOR MULTILEVEL FEM AND BEM SOLVERS FROM CAD DATA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2879}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28795}, pages = {20}, abstract = {As numerical techniques for solving PDE or integral equations become more sophisticated, treatments of the generation of the geometric inputs should also follow that numerical advancement. This document describes the preparation of CAD data so that they can later be applied to hierarchical BEM or FEM solvers. For the BEM case, the geometric data are described by surfaces which we want to decompose into several curved foursided patches. We show the treatment of untrimmed and trimmed surfaces. In particular, we provide prevention of smooth corners which are bad for diffeomorphism. Additionally, we consider the problem of characterizing whether a Coons map is a diffeomorphism from the unit square onto a planar domain delineated by four given curves. We aim primarily at having not only theoretically correct conditions but also practically efficient methods. As for FEM geometric preparation, we need to decompose a 3D solid into a set of curved tetrahedra. First, we describe some method of decomposition without adding too many Steiner points (additional points not belonging to the initial boundary nodes of the boundary surface). Then, we provide a methodology for efficiently checking whether a tetrahedral transfinite interpolation is regular. That is done by a combination of degree reduction technique and subdivision. Along with the method description, we report also on some interesting practical results from real CAD data.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{ConstalesKrausshar, author = {Constales, Denis and Kraußhar, Rolf S{\"o}ren}, title = {ON THE KLEIN-GORDON EQUATION ON THE 3-TORUS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2863}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28639}, pages = {10}, abstract = {In this paper we consider the time independent Klein-Gordon equation on some conformally flat 3-tori with given boundary data. We set up an explicit formula for the fundamental solution. We show that we can represent any solution to the homogeneous Klein-Gordon equation on the torus as finite sum over generalized 3-fold periodic elliptic functions that are in the kernel of the Klein-Gordon operator. Furthermore we prove Cauchy and Green type integral formulas and set up a Teodorescu and Cauchy transform for the toroidal Klein-Gordon operator. These in turn are used to set up explicit formulas for the solution to the inhomogeneous version of the Klein-Gordon equation on the 3-torus.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{ConstalesKrausshar, author = {Constales, Denis and Kraußhar, Rolf S{\"o}ren}, title = {ON THE NAVIER-STOKES EQUATION WITH FREE CONVECTION IN STRIP DOMAINS AND 3D TRIANGULAR CHANNELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2938}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29387}, pages = {12}, abstract = {The Navier-Stokes equations and related ones can be treated very elegantly with the quaternionic operator calculus developed in a series of works by K. Guerlebeck, W. Sproeossig and others. This study will be extended in this paper. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one basically needs to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. With special variants of quaternionic holomorphic multiperiodic functions we obtain explicit formulas for three dimensional parallel plate channels, rectangular block domains and regular triangular channels. The explicit knowledge of the integral kernels makes it then possible to evaluate the operator equations in order to determine the solutions of the boundary value problem explicitly.}, subject = {Architektur }, language = {en} } @inproceedings{GutierrezSRamirezRodriguezetal., author = {Gutierrez S, Andrei and Ramirez, Marco P. and Rodriguez, Octavio and Sanchez N., V.D.}, title = {ON THE SOLUTIONS OF ELECTRICAL IMPEDANCE EQUATION: A PSEUDOANALYTIC APPROACH FOR SEPARABLE-VARIABLES CONDUCTIVITY FUNCTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2847}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28478}, pages = {11}, abstract = {Using a quaternionic reformulation of the electrical impedance equation, we consider a two-dimensional separable-variables conductivity function and, posing two different techniques, we obtain a special class of Vekua equation, whose general solution can be approach by virtue of Taylor series in formal powers, for which is possible to introduce an explicit Bers generating sequence.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{EngelkeSchuster, author = {Engelke, Gerald and Schuster, Otmar}, title = {OPENING THE RESERVE OF ECONOMIC EFFICIENCY IN LOGISTICAL AND FACILITY MANAGEMENT SERVICES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3017}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30177}, pages = {8}, abstract = {In many branches companies often lose the visibility of their human and technical resources of their field service. On the one hand the people in the fieldservice are often free like kings on the other hand they do not take part of the daily communication in the central office and suffer under the lacking involvement in the decisions inside the central office. The result is inefficiency. Reproaches in both directions follow. With the radio systems and then mobile phones the ditch began to dry up. But the solutions are far from being productive.}, subject = {Architektur }, language = {en} } @inproceedings{Muschalla, author = {Muschalla, Dirk}, title = {OPTIMIZATION OF WATER RESOURCES SYSTEMS USING MULTI-OBJECTIVE EVOLUTION STRATEGIES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2995}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29953}, pages = {10}, abstract = {This paper deals with the development of a new multi-objective evolution strategy in combination with an integrated pollution-load and water-quality model. The optimization algorithm combines the advantages of the Non-Dominated Sorting Genetic Algorithm and Self-Adaptive Evolution Strategies. The identification of a good spread of solutions on the pareto-optimum front and the optimization of a large number of decision variables equally demands numerous simulation runs. In addition, statements with regard to the frequency of critical concentrations and peak discharges require continuous long-term simulations. Therefore, a fast operating integrated simulation model is needed providing the required precision of the results. For this purpose, a hydrological deterministic pollution-load model has been coupled with a river water-quality and a rainfall-runoff model. Wastewater treatment plants are simulated in a simplified way. The functionality of the optimization and simulation tool has been validated by analyzing a real catchment area including sewer system, WWTP, water body and natural river basin. For the optimization/rehabilitation of the urban drainage system, both innovative and approved measures have been examined and used as decision variables. As objective functions, investment costs and river water quality criteria have been used.}, subject = {Architektur }, language = {en} } @inproceedings{EbertLenzen, author = {Ebert, Carsten and Lenzen, Armin}, title = {OUTPUT-ONLY ANALYSIS FOR EXPERIMENTAL DAMAGE DETECTION OF A TIED-ARCH BRIDGE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2945}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29452}, pages = {13}, abstract = {In civil engineering it is very difficult and often expensive to excite constructions such as bridges and buildings with an impulse hammer or shaker. This problem can be avoided with the output-only method as special feature of stochastic system identification. The permanently existing ambient noise (e.g. wind, traffic, waves) is sufficient to excite the structures in their operational conditions. The output-only method is able to estimate the observable part of a state-space-model which contains the dynamic characteristics of the measured mechanical system. Because of the assumption that the ambient excitation is white there is no requirement to measure the input. Another advantage of the output-only method is the possibility to get high detailed models by a special method, called polyreference setup. To pretend the availability of a much larger set of sensors the data from varying sensor locations will be collected. Several successive data sets are recorded with sensors at different locations (moving sensors) and fixed locations (reference sensors). The covariance functions of the reference sensors are bases to normalize the moving sensors. The result of the following subspace-based system identification is a high detailed black-box-model that contains the weighting function including the well-known dynamic parameters eigenfrequencies and mode shapes of the mechanical system. Emphasis of this lecture is the presentation of an extensive damage detection experiment. A 53-year old prestressed concrete tied-arch-bridge in H{\"u}nxe (Germany) was deconstructed in 2005. Preliminary numerous vibration measurements were accomplished. The first experiment for system modification was an additional support near the bridge bearing of one main girder. During a further experiment one hanger from one tied arch was cut through as an induced damage. Some first outcomes of the described experiments will be presented.}, subject = {Architektur }, language = {en} } @inproceedings{ErlemannHartmann, author = {Erlemann, Kai and Hartmann, Dietrich}, title = {PARALLELIZATION OF A MICROSCOPIC TRAFFIC SIMULATION SYSTEM USING MPIJAVA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2951}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29516}, pages = {8}, abstract = {Traffic simulation is a valuable tool for the design and evaluation of road networks. Over the years, the level of detail to which urban and freeway traffic can be simulated has increased steadily, shifting from a merely qualitative macroscopic perspective to a very detailed microscopic view, where the behavior of individual vehicles is emulated realistically. With the improvement of behavioral models, however, the computational complexity has also steadily increased, as more and more aspects of real-life traffic have to be considered by the simulation environment. Despite the constant increase in computing power of modern personal computers, microscopic simulation stays computationally expensive, limiting the maximum network size than can be simulated on a single-processor computer in reasonable time. Parallelization can distribute the computing load from a single computer system to a cluster of several computing nodes. To this end, the exisiting simulation framework had to be adapted to allow for a distributed approach. As the simulation is ultimately targeted to be executed in real-time, incorporating real traffic data, only a spatial partition of the simulation was considered, meaning the road network has to be partitioned into subnets of comparable complexity, to ensure a homogenous load balancing. The partition process must also ensure, that the division between subnets does only occur in regions, where no strong interaction between the separated road segments occurs (i.e. not in the direct vicinity of junctions). In this paper, we describe a new microscopic reasoning voting strategy, and discuss in how far the increasing computational costs of these more complex behaviors lend themselves to a parallelized approach. We show the parallel architecture employed, the communication between computing units using MPIJava, and the benefits and pitfalls of adapting a single computer application to be used on a multi-node computing cluster.}, subject = {Architektur }, language = {en} } @inproceedings{TrummerDenzlerSuesse, author = {Trummer, Michael and Denzler, J. and S{\"u}ße, Herbert}, title = {PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3028}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30282}, pages = {8}, abstract = {The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time.}, subject = {Architektur }, language = {en} } @inproceedings{Skowronek, author = {Skowronek, Marek}, title = {PROBABILISTIC LIMIT STATE ANALYSIS OF MONUMENTAL STRUCTURE BY MONTE CARLO SIMULATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3022}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30222}, pages = {10}, abstract = {The concept is presented of the sensitivity analysis of the limit state of the structure with respect to selected basic variables. The sensitivity is presented in the form of the probability distribution of the limit state of the structure. The analysis is performed by the problem-oriented Monte Carlo simulation procedure. The procedure is based on the problem's definition of the elementary event, as a structural limit state. Thus the sample space consists of limit states of the structure. Defined on the sample space the one-dimensional random multiplier is introduced. This multiplier refers to the dominant basic variable (group of variables) of the problem. Numerical procedure results in the set of random numbers. Normalized relative histogram of this set is an estimator of the PDF of the limit state of the structure. Estimators of reliability, or the probability of failure are statistical characteristics of this histogram. The procedure is illustrated by the example of sensitivity analysis of the serviceability limit state of monumental structure. It is the colonnade of Licheń Basilica, situated in central Poland. Limit state of the structure is examined with reference to the upper deck horizontal deflection. Wind actions are taken as dominant variables. An assumption is made that the wind load intensities acting on the lower and on the upper storey of the colonnade, respectively, are identically distributed, but correlated random variables. Three correlation variants of these variables are considered. Relevant limit state histograms are analysed thereafter. The paper ends with the conclusions referring to the method and some general remarks on the fully probabilistic design.}, subject = {Architektur }, language = {en} } @inproceedings{Schneider, author = {Schneider, David}, title = {QUALITY OPTIMIZATION USING LOCALLY REFINED META MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2886}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28864}, pages = {17}, abstract = {Quality is one of the most important properties of a product. Providing the optimal quality can reduce costs for rework, scrap, recall or even legal actions while satisfying customers demand for reliability. The aim is to achieve ``built-in'' quality within product development process (PDP). The common approach therefore is the robust design optimization (RDO). It uses stochastic values as constraint and/or objective to obtain a robust and reliable optimal design. In classical approaches the effort required for stochastic analysis multiplies with the complexity of the optimization algorithm. The suggested approach shows that it is possible to reduce this effort enormously by using previously obtained data. Therefore the support point set of an underlying metamodel is filled iteratively during ongoing optimization in regions of interest if this is necessary. In a simple example, it will be shown that this is possible without significant loss of accuracy.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SmarslyHartmann, author = {Smarsly, Kay and Hartmann, Dietrich}, title = {REAL-TIME MONITORING OF WIND CONVERTERS BASED ON SOFTWARE AGENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2891}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28916}, pages = {11}, abstract = {Due to increasing numbers of wind energy converters, the accurate assessment of the lifespan of their structural parts and the entire converter system is becoming more and more paramount. Lifespan-oriented design, inspections and remedial maintenance are challenging because of their complex dynamic behavior. Wind energy converters are subjected to stochastic turbulent wind loading causing corresponding stochastic structural response and vibrations associated with an extreme number of stress cycles (up to 109 according to the rotation of the blades). Currently, wind energy converters are constructed for a service life of about 20 years. However, this estimation is more or less made by rule of thumb and not backed by profound scientific analyses or accurate simulations. By contrast, modern structural health monitoring systems allow an improved identification of deteriorations and, thereupon, to drastically advance the lifespan assessment of wind energy converters. In particular, monitoring systems based on artificial intelligence techniques represent a promising approach towards cost-efficient and reliable real-time monitoring. Therefore, an innovative real-time structural health monitoring concept based on software agents is introduced in this contribution. For a short time, this concept is also turned into a real-world monitoring system developed in a DFG joint research project in the authors' institute at the Ruhr-University Bochum. In this paper, primarily the agent-based development, implementation and application of the monitoring system is addressed, focusing on the real-time monitoring tasks in the deserved detail.}, subject = {Angewandte Informatik}, language = {en} }