@article{NguyenXuanNguyenBordasetal., author = {Nguyen-Xuan, Hung and Nguyen, Hiep Vinh and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon and Duflot, Marc}, title = {A cell-based smoothed finite element method for three dimensional solid structures}, series = {KSCE Journal of Civil Engineering}, journal = {KSCE Journal of Civil Engineering}, doi = {10.1007/s12205-012-1515-7}, pages = {1230 -- 1242}, abstract = {This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation.}, subject = {Angewandte Mathematik}, language = {en} } @article{TalebiSilaniBordasetal., author = {Talebi, Hossein and Silani, Mohammad and Bordas, St{\´e}phane Pierre Alain and Kerfriden, Pierre and Rabczuk, Timon}, title = {A computational library for multiscale modeling of material failure}, series = {Computational Mechanics}, journal = {Computational Mechanics}, abstract = {A computational library for multiscale modeling of material failure}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhuangHuangLiangetal., author = {Zhuang, Xiaoying and Huang, Runqiu and Liang, Chao and Rabczuk, Timon}, title = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage}, series = {Mathematical Problems in Engineering}, journal = {Mathematical Problems in Engineering}, doi = {10.1155/2014/179169}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31726}, abstract = {Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.}, subject = {Energiespeicherung}, language = {en} } @article{ZhuangHuangRabczuketal., author = {Zhuang, Xiaoying and Huang, Runqiu and Rabczuk, Timon and Liang, C.}, title = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage}, series = {Mathematical Problems in Engineering}, journal = {Mathematical Problems in Engineering}, abstract = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage}, subject = {Angewandte Mathematik}, language = {en} } @article{SilaniZiaeiRadTalebietal., author = {Silani, Mohammad and Ziaei-Rad, S. and Talebi, Hossein and Rabczuk, Timon}, title = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, abstract = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiangJiaetal., author = {Zhao, Jun-Hua and Jiang, Jin-Wu and Jia, Yue and Guo, Wanlin and Rabczuk, Timon}, title = {A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates}, series = {Carbon}, journal = {Carbon}, doi = {10.1016/j.carbon.2013.01.041}, pages = {108 -- 119}, abstract = {Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems.}, subject = {Angewandte Mathematik}, language = {en} } @article{BudarapuGracieBordasetal., author = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon}, title = {An adaptive multiscale method for quasi-static crack growth}, series = {Computational Mechanics}, journal = {Computational Mechanics}, doi = {10.1007/s00466-013-0952-6}, pages = {1129 -- 1148}, abstract = {This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom-atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement.}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThanhMuthuZhuangetal., author = {Nguyen-Thanh, Nhon and Muthu, Jacob and Zhuang, Xiaoying and Rabczuk, Timon}, title = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics}, series = {Computational Mechanics}, journal = {Computational Mechanics}, pages = {369 -- 385}, abstract = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasPintodaCostaRabczuketal., author = {Areias, Pedro and Pinto da Costa, A. and Rabczuk, Timon and Queiros de Melo, F. J. M. and Dias-da-Costa, D.}, title = {An alternative formulation for quasi-static frictional and cohesive contact problems}, series = {Computational Mechanics}, journal = {Computational Mechanics}, pages = {807 -- 824}, abstract = {An alternative formulation for quasi-static frictional and cohesive contact problems}, subject = {Angewandte Mathematik}, language = {en} } @misc{Udrea, type = {Master Thesis}, author = {Udrea, Mihai-Andrei}, title = {Assessment of Data from Dynamic Bridge Monitoring}, doi = {10.25643/bauhaus-universitaet.2174}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140429-21742}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The focus of the thesis is to process measurements acquired from a continuous monitoring system at a railway bridge. Temperature, strain and ambient vibration records are analysed and two main directions of investigation are pursued. The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is studied and correlated to environmental and operational factors. The second aspect deals with the structural response to passing trains. Corresponding triggered records of strain and temperature are processed and their assessment is accomplished using the average strains induced by each train as the reference parameter. Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out.}, subject = {Messtechnik}, language = {en} } @article{ZhaoLuRabczuk, author = {Zhao, Jun-Hua and Lu, Lixin and Rabczuk, Timon}, title = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines}, series = {The Journal of Chemical Physics}, journal = {The Journal of Chemical Physics}, doi = {10.1063/1.4878115}, abstract = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines}, subject = {Angewandte Mathematik}, language = {en} } @article{JoshiHildebrandAloraieretal., author = {Joshi, Suraj and Hildebrand, J{\"o}rg and Aloraier, Abdulkareem S. and Rabczuk, Timon}, title = {Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate}, series = {Computational Materials Science}, journal = {Computational Materials Science}, doi = {10.1016/j.commatsci.2012.11.029}, pages = {559 -- 565}, abstract = {This paper presents several aspects of characterization of welding heat source parameters in Goldak's double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40\% to 80\% in increments of 10\%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak's double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters.}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiangWangetal., author = {Zhao, Jiyun and Jiang, Jin-Wu and Wang, L. and Guo, Wanlin and Rabczuk, Timon}, title = {Coarse-grained potentials of single-walled carbon nanotubes}, series = {Journal of the Mechanics and Physics of Solids}, journal = {Journal of the Mechanics and Physics of Solids}, abstract = {Coarse-grained potentials of single-walled carbon nanotubes}, subject = {Angewandte Mathematik}, language = {en} } @article{NanthakumarLahmerRabczuk, author = {Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon}, title = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {98 -- 112}, abstract = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets}, subject = {Angewandte Mathematik}, language = {en} } @article{BudarapuGracieYangetal., author = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Yang, Shih-Wei and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Efficient Coarse Graining in Multiscale Modeling of Fracture}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, pages = {126 -- 143}, abstract = {Efficient Coarse Graining in Multiscale Modeling of Fracture}, subject = {Angewandte Mathematik}, language = {en} } @article{AmaniBagherzadehRabczuk, author = {Amani, Jafar and Bagherzadeh, Amir Saboor and Rabczuk, Timon}, title = {Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method}, series = {Mathematical Problems in Engineering}, journal = {Mathematical Problems in Engineering}, abstract = {Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method}, subject = {Angewandte Mathematik}, language = {en} } @article{AmaniSaboorBagherzadehRabczuk, author = {Amani, Jafar and Saboor Bagherzadeh, Amir and Rabczuk, Timon}, title = {Error estimate and adaptive refinement in mixed discrete least squares meshless method}, series = {Mathematical Problems in Engineering}, journal = {Mathematical Problems in Engineering}, doi = {10.1155/2014/721240}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31181}, abstract = {The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method.}, subject = {Elastizit{\"a}t}, language = {en} } @article{ChenNguyenThanhNguyenXuanetal., author = {Chen, Lei and Nguyen-Thanh, Nhon and Nguyen-Xuan, Hung and Rabczuk, Timon and Bordas, St{\´e}phane Pierre Alain and Limbert, Georges}, title = {Explicit finite deformation analysis of isogeometric membranes}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {104 -- 130}, abstract = {Explicit finite deformation analysis of isogeometric membranes}, subject = {Angewandte Mathematik}, language = {en} } @article{JiaAnitescuGhorashietal., author = {Jia, Yue and Anitescu, Cosmin and Ghorashi, Seyed Shahram and Rabczuk, Timon and Dias-da-Costa, D.}, title = {Extended Isogeometric Analysis for Material Interface Problems}, series = {Journal of Applied Mathematics}, journal = {Journal of Applied Mathematics}, abstract = {Extended Isogeometric Analysis for Material Interface Problems}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukCamanho, author = {Areias, Pedro and Rabczuk, Timon and Camanho, P.P.}, title = {Finite strain fracture of 2D problems with injected anisotropic softening elements}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, abstract = {Finite strain fracture of 2D problems with injected anisotropic softening elements}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenThoiRabczukLamPhatetal., author = {Nguyen-Thoi, T. and Rabczuk, Timon and Lam-Phat, T. and Ho-Huu, V. and Phung-Van, P.}, title = {Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3)}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, abstract = {Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3)}, subject = {Angewandte Mathematik}, language = {en} } @article{XuMourrainGalligoetal., author = {Xu, G. and Mourrain, B. and Galligo, A. and Rabczuk, Timon}, title = {High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods}, series = {Computational Mechanics}, journal = {Computational Mechanics}, abstract = {High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods}, subject = {Angewandte Mathematik}, language = {en} } @article{LuuMartinezRodrigoZabeletal., author = {Luu, M. and Martinez-Rodrigo, M.D. and Zabel, Volkmar and K{\"o}nke, Carsten}, title = {H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges}, series = {Journal of Sound and Vibration}, journal = {Journal of Sound and Vibration}, pages = {2421 -- 2442}, abstract = {H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges}, subject = {Angewandte Mathematik}, language = {en} } @article{ThaiFerreiraBordasetal., author = {Thai, Chien H. and Ferreira, A.J.M. and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon and Nguyen-Xuan, Hung}, title = {Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory}, series = {European Journal of Mechanics}, journal = {European Journal of Mechanics}, pages = {89 -- 108}, abstract = {Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory}, subject = {Angewandte Mathematik}, language = {en} } @article{NguyenKerfridenBordasetal., author = {Nguyen, V.P. and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon}, title = {Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm}, series = {Computer-Aided Design}, journal = {Computer-Aided Design}, abstract = {Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhangZhuangMuthuetal., author = {Zhang, Yancheng and Zhuang, Xiaoying and Muthu, Jacob and Mabrouki, Tarek and Fontaine, Micha{\"e}l and Gong, Yadong and Rabczuk, Timon}, title = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation}, series = {Composites Part B Engineering}, journal = {Composites Part B Engineering}, pages = {27 -- 33}, abstract = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangParkRabczuk, author = {Jiang, Jin-Wu and Park, Harold S. and Rabczuk, Timon}, title = {MoS2 nanoresonators: intrinsically better than graphene?}, series = {Nanoscale}, journal = {Nanoscale}, pages = {3618 -- 3625}, abstract = {MoS2 nanoresonators: intrinsically better than graphene?}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Zhao, author = {Zhao, Jun-Hua}, title = {Multiscale modeling of nanodevices based on carbon nanotubes and polymers}, doi = {10.25643/bauhaus-universitaet.2107}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140130-21078}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {175}, abstract = {This thesis concerns the physical and mechanical interactions on carbon nanotubes and polymers by multiscale modeling. CNTs have attracted considerable interests in view of their unique mechanical, electronic, thermal, optical and structural properties, which enable them to have many potential applications. Carbon nanotube exists in several structure forms, from individual single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) to carbon nanotube bundles and networks. The mechanical properties of SWCNTs and MWCNTs have been extensively studied by continuum modeling and molecular dynamics (MD) simulations in the past decade since the properties could be important in the CNT-based devices. CNT bundles and networks feature outstanding mechanical performance and hierarchical structures and network topologies, which have been taken as a potential saving-energy material. In the synthesis of nanocomposites, the formation of the CNT bundles and networks is a challenge to remain in understanding how to measure and predict the properties of such large systems. Therefore, a mesoscale method such as a coarse-grained (CG) method should be developed to study the nanomechanical characterization of CNT bundles and networks formation. In this thesis, the main contributions can be written as follows: (1) Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. (2) The CG potentials of SWCNTs are established by a molecular mechanics model. (3) The binding energy between two parallel and crossing SWCNTs and MWCNTs is obtained by continuum modeling of the van der Waals interaction between them. Crystalline and amorphous polymers are increasingly used in modern industry as tructural materials due to its important mechanical and physical properties. For crystalline polyethylene (PE), despite its importance and the studies of available MD simulations and continuum models, the link between molecular and continuum descriptions of its mechanical properties is still not well established. For amorphous polymers, the chain length and temperature effect on their elastic and elastic-plastic properties has been reported based on the united-atom (UA) and CG MD imulations in our previous work. However, the effect of the CL and temperature on the failure behavior is not understood well yet. Especially, the failure behavior under shear has been scarcely reported in previous work. Therefore, understanding the molecular origins of macroscopic fracture behavior such as fracture energy is a fundamental scientific challenge. In this thesis, the main contributions can be written as follows: (1) An analytical molecular mechanics model is developed to obtain the size-dependent elastic properties of crystalline PE. (2) We show that the two molecular mechanics models, the stick-spiral and the beam models, predict considerably different mechanical properties of materials based on energy equivalence. The difference between the two models is independent of the materials. (3) The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers are scrutinized using molecular dynamics simulations. Finally, the influence of polymer wrapped two neighbouring SWNTs' dispersion on their load transfer is investigated by molecular dynamics (MD) simulations, in which the SWNTs' position, the polymer chain length and the temperature on the interaction force is systematically studied.}, subject = {Mehrskalenmodell}, language = {en} } @misc{Habtemariam, type = {Master Thesis}, author = {Habtemariam, Abinet Kifle}, title = {Numerical Demolition Analysis of a Slender Guyed Antenna Mast}, doi = {10.25643/bauhaus-universitaet.4460}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210723-44609}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {75}, abstract = {The main purpose of the thesis is to ensure the safe demolition of old guyed antenna masts that are located in different parts of Germany. The major problem in demolition of this masts is the falling down of the masts in unexpected direction because of buckling problem. The objective of this thesis is development of a numerical models using finite element method (FEM) and assuring a controlled collapse by coming up with different time setups for the detonation of explosives which are responsible for cutting down the cables. The result of this thesis will avoid unexpected outcomes during the demolition processes and prevent risk of collapsing of the mast over near by structures.}, subject = {Abbruch}, language = {en} } @article{GhasemiBrighentiZhuangetal., author = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon}, title = {Optimization of fiber distribution in fiber reinforced composite by using NURBS functions}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {463 -- 473}, abstract = {Optimization of fiber distribution in fiber reinforced composite by using NURBS functions}, subject = {Angewandte Mathematik}, language = {en} } @article{JamshidianRabczuk, author = {Jamshidian, M. and Rabczuk, Timon}, title = {Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale}, series = {Journal of Computational Physics}, journal = {Journal of Computational Physics}, pages = {23 -- 35}, abstract = {Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale}, subject = {Angewandte Mathematik}, language = {en} } @article{AmiriMillanShenetal., author = {Amiri, Fatemeh and Mill{\´a}n, D. and Shen, Y. and Rabczuk, Timon and Arroyo, M.}, title = {Phase-field modeling of fracture in linear thin shells}, series = {Theoretical and Applied Fracture Mechanics}, journal = {Theoretical and Applied Fracture Mechanics}, pages = {102 -- 109}, abstract = {Phase-field modeling of fracture in linear thin shells}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangWangRabczuk, author = {Jiang, Jin-Wu and Wang, Bing-Shen and Rabczuk, Timon}, title = {Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation}, series = {Nanotechnology}, journal = {Nanotechnology}, abstract = {Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation}, subject = {Angewandte Mathematik}, language = {en} } @article{BeexKerfridenRabczuketal., author = {Beex, L.A.A. and Kerfriden, Pierre and Rabczuk, Timon and Bordas, St{\´e}phane Pierre Alain}, title = {Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, abstract = {Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation}, subject = {Angewandte Mathematik}, language = {en} } @article{GhasemiBrighentiZhuangetal., author = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon}, title = {Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements}, series = {Structural and Multidisciplinary Optimization}, journal = {Structural and Multidisciplinary Optimization}, abstract = {Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements}, subject = {Angewandte Mathematik}, language = {en} } @article{VuBacLahmerKeiteletal., author = {Vu-Bac, N. and Lahmer, Tom and Keitel, Holger and Zhao, Jun-Hua and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations}, series = {Mechanics of Materials}, journal = {Mechanics of Materials}, pages = {70 -- 84}, abstract = {Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations}, subject = {Angewandte Mathematik}, language = {en} } @article{VuBacLahmerZhangetal., author = {Vu-Bac, N. and Lahmer, Tom and Zhang, Yancheng and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs)}, series = {Composites Part B Engineering}, journal = {Composites Part B Engineering}, pages = {80 -- 95}, abstract = {Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs)}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Mai, author = {Mai, Luu}, title = {Structural Control Systems in High-speed Railway Bridges}, issn = {1610-7381}, doi = {10.25643/bauhaus-universitaet.2339}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141223-23391}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {147}, abstract = {Structural vibration control of high-speed railway bridges using tuned mass dampers, semi-active tuned mass dampers, fluid viscous dampers and magnetorheological dampers to reduce resonant structural vibrations is studied. In this work, the addressed main issues include modeling of the dynamic interaction of the structures, optimization of the parameters of the dampers and comparison of their efficiency. A new approach to optimize multiple tuned mass damper systems on an uncertain model is proposed based on the H-infinity optimization criteria and the DK iteration procedure with norm-bounded uncertainties in frequency domain. The parameters of tuned mass dampers are optimized directly and simultaneously on different modes contributing significantly to the multi-resonant peaks to explore the different possible combinations of parameters. The effectiveness of the present method is also evaluated through comparison with a previous method. In the case of semi-active tuned mass dampers, an optimization algorithm is derived to control the magnetorheological damper in these semi-active damping systems. The use of the proposed algorithm can generate various combinations of control gains and state variables. This can lead to the improvement of the ability of MR dampers to track the desired control forces. An uncertain model to reduce detuning effects is also considered in this work. Next, for fluid viscous dampers, in order to tune the optimal parameters of fluid viscous dampers to the vicinity of the exact values, analytical formulae which can include structural damping are developed based on the perturbation method. The proposed formulae can also be considered as an improvement of the previous analytical formulae, especially for bridge beams with large structural damping. Finally, a new combination of magnetorheological dampers and a double-beam system to improve the performance of the primary structure vibration is proposed. An algorithm to control magnetorheological dampers in this system is developed by using standard linear matrix inequality techniques. Weight functions as a loop shaping procedure are also introduced in the feedback controllers to improve the tracking ability of magnetorheological damping forces. To this end, the effectiveness of magnetorheological dampers controlled by the proposed scheme, along with the effects of the uncertain and time-delay parameters on the models, are evaluated through numerical simulations. Additionally, a comparison of the dampers based on their performance is also considered in this work.}, subject = {High-speed railway bridge}, language = {en} } @article{ZhaoKouJiangetal., author = {Zhao, Jun-Hua and Kou, Liangzhi and Jiang, Jin-Wu and Rabczuk, Timon}, title = {Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures}, series = {Nanotechnology}, journal = {Nanotechnology}, doi = {10.1088/0957-4484/25/29/295701}, abstract = {Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukBarbosa, author = {Areias, Pedro and Rabczuk, Timon and Barbosa, J.I.}, title = {The extended unsymmetric frontal solution for multiple-point constraints}, series = {Engineering Computations}, journal = {Engineering Computations}, abstract = {The extended unsymmetric frontal solution for multiple-point constraints}, subject = {Angewandte Mathematik}, language = {en} } @article{GhasemiRafieeZhuangetal., author = {Ghasemi, Hamid and Rafiee, Roham and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon}, title = {Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {295 -- 305}, abstract = {Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling}, subject = {Angewandte Mathematik}, language = {en} } @article{IlyaniAkmarLahmerBordasetal., author = {Ilyani Akmar, A.B. and Lahmer, Tom and Bordas, St{\´e}phane Pierre Alain and Beex, L.A.A. and Rabczuk, Timon}, title = {Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties}, series = {Composite Structures}, journal = {Composite Structures}, doi = {10.1016/j.compstruct.2014.04.014}, pages = {1 -- 17}, abstract = {Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties}, subject = {Angewandte Mathematik}, language = {en} }