@article{NguyenXuanNguyenBordasetal.,
  author    = {Nguyen-Xuan, Hung and Nguyen, Hiep Vinh and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon and Duflot, Marc},
  title     = {A cell-based smoothed finite element method for three dimensional solid structures},
  series = {KSCE Journal of Civil Engineering},
  journal   = {KSCE Journal of Civil Engineering},
  doi       = {10.1007/s12205-012-1515-7},
  pages     = {1230 -- 1242},
  abstract  = {This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoWangJiangetal.,
  author    = {Zhao, Jun-Hua and Wang, L. and Jiang, Jin-Wu and Wang, Z. and Guo, Wanlin and Rabczuk, Timon},
  title     = {A comparative study of two molecular mechanics models based on harmonic potentials},
  series = {Journal of Applied Physics},
  journal   = {Journal of Applied Physics},
  abstract  = {A comparative study of two molecular mechanics models based on harmonic potentials},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiSilaniBordasetal.,
  author    = {Talebi, Hossein and Silani, Mohammad and Bordas, St{\´e}phane Pierre Alain and Kerfriden, Pierre and Rabczuk, Timon},
  title     = {A computational library for multiscale modeling of material failure},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  abstract  = {A computational library for multiscale modeling of material failure},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhuangHuangLiangetal.,
  author    = {Zhuang, Xiaoying and Huang, Runqiu and Liang, Chao and Rabczuk, Timon},
  title     = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  doi       = {10.1155/2014/179169},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31726},
  abstract  = {Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.},
  subject      = {Energiespeicherung},
  language  = {en}
}
@article{ZhuangHuangRabczuketal.,
  author    = {Zhuang, Xiaoying and Huang, Runqiu and Rabczuk, Timon and Liang, C.},
  title     = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  abstract  = {A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhangWangLahmeretal.,
  author    = {Zhang, Chao and Wang, Cuixia and Lahmer, Tom and He, Pengfei and Rabczuk, Timon},
  title     = {A dynamic XFEM formulation for crack identification},
  series = {International Journal of Mechanics and Materials in Design},
  journal   = {International Journal of Mechanics and Materials in Design},
  pages     = {427 -- 448},
  abstract  = {A dynamic XFEM formulation for crack identification},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{YangBudarapuMahapatraetal.,
  author    = {Yang, Shih-Wei and Budarapu, Pattabhi Ramaiah and Mahapatra, D.R. and Bordas, St{\´e}phane Pierre Alain and Zi, Goangseup and Rabczuk, Timon},
  title     = {A Meshless Adaptive Multiscale Method for Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {382 -- 395},
  abstract  = {A Meshless Adaptive Multiscale Method for Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenXuanRabczukNguyenThanhetal.,
  author    = {Nguyen-Xuan, Hung and Rabczuk, Timon and Nguyen-Thanh, Nhon and Nguyen-Thoi, T. and Bordas, St{\´e}phane Pierre Alain},
  title     = {A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {679 -- 701},
  abstract  = {A node-based smoothed finite element method (NS-FEM) for analysis of Reissner-Mindlin plates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiaZhangRabczuk,
  author    = {Jia, Yue and Zhang, Yongjie and Rabczuk, Timon},
  title     = {A Novel Dynamic Multilevel Technique for Image Registration},
  series = {Computers and Mathematics with Applications},
  journal   = {Computers and Mathematics with Applications},
  abstract  = {A Novel Dynamic Multilevel Technique for Image Registration},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{KerfridenGouryRabczuketal.,
  author    = {Kerfriden, Pierre and Goury, O. and Rabczuk, Timon and Bordas, St{\´e}phane Pierre Alain},
  title     = {A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {169 -- 188},
  abstract  = {A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacNguyenXuanChenetal.,
  author    = {Vu-Bac, N. and Nguyen-Xuan, Hung and Chen, Lei and Lee, C.K. and Zi, Goangseup and Zhuang, Xiaoying and Liu, G.R. and Rabczuk, Timon},
  title     = {A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2013/978026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170426-31676},
  abstract  = {This paper presents a novel numerical procedure based on the combination of an edge-based smoothed finite element (ES-FEM) with a phantom-node method for 2D linear elastic fracture mechanics. In the standard phantom-node method, the cracks are formulated by adding phantom nodes, and the cracked element is replaced by two new superimposed elements. This approach is quite simple to implement into existing explicit finite element programs. The shape functions associated with discontinuous elements are similar to those of the standard finite elements, which leads to certain simplification with implementing in the existing codes. The phantom-node method allows modeling discontinuities at an arbitrary location in the mesh. The ES-FEM model owns a close-to-exact stiffness that is much softer than lower-order finite element methods (FEM). Taking advantage of both the ES-FEM and the phantom-node method, we introduce an edge-based strain smoothing technique for the phantom-node method. Numerical results show that the proposed method achieves high accuracy compared with the extended finite element method (XFEM) and other reference solutions.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{SilaniZiaeiRadTalebietal.,
  author    = {Silani, Mohammad and Ziaei-Rad, S. and Talebi, Hossein and Rabczuk, Timon},
  title     = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites},
  series = {Theoretical and Applied Fracture Mechanics},
  journal   = {Theoretical and Applied Fracture Mechanics},
  abstract  = {A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukCesardeSaetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Jorge, R.N.},
  title     = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  abstract  = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiZiSilanietal.,
  author    = {Talebi, Hossein and Zi, Goangseup and Silani, Mohammad and Samaniego, Esteban and Rabczuk, Timon},
  title     = {A simple circular cell method for multilevel finite element analysis},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2012/526846},
  abstract  = {A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiZiSilanietal.,
  author    = {Talebi, Hossein and Zi, Goangseup and Silani, Mohammad and Samaniego, Esteban and Rabczuk, Timon},
  title     = {A simple circular cell method for multilevel finite element analysis},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2012/526846},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170426-31639},
  abstract  = {A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{NguyenThanhThaiHoangNguyenXuanetal.,
  author    = {Nguyen-Thanh, Nhon and Thai-Hoang, C. and Nguyen-Xuan, Hung and Rabczuk, Timon},
  title     = {A smoothed finite element method for the static and free vibration analysis of shells},
  series = {Journal of Civil Engineering and Architecture},
  journal   = {Journal of Civil Engineering and Architecture},
  pages     = {13 -- 25},
  abstract  = {A smoothed finite element method for the static and free vibration analysis of shells},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{NguyenThanhRabczuk,
  author    = {Nguyen-Thanh, Nhon and Rabczuk, Timon},
  title     = {A SMOOTHED FINITE ELEMENT METHOD FOR THE STATIC AND FREE VIBRATION ANALYSIS OF SHELLS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2877},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28777},
  pages     = {24},
  abstract  = {A four-node quadrilateral shell element with smoothed membrane-bending based on Mindlin-Reissner theory is proposed. The element is a combination of a plate bending and membrane element. It is based on mixed interpolation where the bending and membrane stiffness matrices are calculated on the boundaries of the smoothing cells while the shear terms are approximated by independent interpolation functions in natural coordinates. The proposed element is robust, computationally inexpensive and free of locking. Since the integration is done on the element boundaries for the bending and membrane terms, the element is more accurate than the MITC4 element for distorted meshes. This will be demonstrated for several numerical examples.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{VuBacLahmerZhuangetal.,
  author    = {Vu-Bac, N. and Lahmer, Tom and Zhuang, Xiaoying and Nguyen-Thoi, T. and Rabczuk, Timon},
  title     = {A software framework for probabilistic sensitivity analysis for computationally expensive models},
  series = {Advances in Engineering Software},
  journal   = {Advances in Engineering Software},
  pages     = {19 -- 31},
  abstract  = {A software framework for probabilistic sensitivity analysis for computationally expensive models},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangRabczukPark,
  author    = {Jiang, Jin-Wu and Rabczuk, Timon and Park, Harold S.},
  title     = {A Stillinger-Weber Potential for Single-Layer Black Phosphorus, and the Importance of Cross-Pucker Interactions for Negative Poisson's Ratio and Edge Stress-Induced Bending},
  series = {Nanoscale},
  journal   = {Nanoscale},
  doi       = {10.1039/C4NR07341J},
  abstract  = {The distinguishing structural feature of single-layered black phosphorus is its puckered structure, which leads to many novel physical properties. In this work, we first present a new parameterization of the Stillinger-Weber potential for single-layered black phosphorus. In doing so, we reveal the importance of a cross-pucker interaction term in capturing its unique mechanical properties, such as a negative Poisson's ratio. In particular, we show that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction. As a consequence, single-layered black phosphorus has a negative Poisson's ratio in the direction perpendicular to the atomic plane. As an additional demonstration of the impact of the cross-pucker interaction, we show that it is also the key factor that enables capturing the edge stress-induced bending of single-layered black phosphorus that has been reported in ab initio calculations.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhorashiLahmerBagherzadehetal.,
  author    = {Ghorashi, Seyed Shahram and Lahmer, Tom and Bagherzadeh, Amir Saboor and Zi, Goangseup and Rabczuk, Timon},
  title     = {A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials},
  series = {Engineering Geology},
  journal   = {Engineering Geology},
  abstract  = {A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangParkGalletal.,
  author    = {Jiang, Jin-Wu and Park, Harold S. and Gall, K. and Leach, A. and Rabczuk, Timon},
  title     = {A Surface Stacking Fault Energy Approach to Predicting Defect Nucleation in Surface-Dominated Nanostructures},
  series = {Journal of the Mechanics and Physics of Solids},
  journal   = {Journal of the Mechanics and Physics of Solids},
  abstract  = {A Surface Stacking Fault Energy Approach to Predicting Defect Nucleation in Surface-Dominated Nanostructures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoJiangJiaetal.,
  author    = {Zhao, Jun-Hua and Jiang, Jin-Wu and Jia, Yue and Guo, Wanlin and Rabczuk, Timon},
  title     = {A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates},
  series = {Carbon},
  journal   = {Carbon},
  doi       = {10.1016/j.carbon.2013.01.041},
  pages     = {108 -- 119},
  abstract  = {Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{SilaniTalebiZiaeiRadetal.,
  author    = {Silani, Mohammad and Talebi, Hossein and Ziaei-Rad, S. and Hamouda, A.M.S. and Zi, Goangseup and Rabczuk, Timon},
  title     = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {425 -- 431},
  abstract  = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacSilaniLahmeretal.,
  author    = {Vu-Bac, N. and Silani, Mohammad and Lahmer, Tom and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {520 -- 535},
  abstract  = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MsekhSargadoJamshidianetal.,
  author    = {Msekh, Mohammed Abdulrazzak and Sargado, M. and Jamshidian, M. and Areias, Pedro and Rabczuk, Timon},
  title     = {ABAQUS implementation of phase_field model for brittle fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {472 -- 484},
  abstract  = {ABAQUS implementation of phase_field model for brittle fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangWangRabczuk,
  author    = {Jiang, Jin-Wu and Wang, Bing-Shen and Rabczuk, Timon},
  title     = {Acoustic and breathing phonon modes in bilayer graphene with Moire-acute patterns},
  series = {Applied Physics Letters},
  journal   = {Applied Physics Letters},
  doi       = {10.1063/1.4735246},
  abstract  = {The lattice dynamics properties are investigated for twisting bilayer graphene. There are big jumps for the inter-layer potential at twisting angle θ=0° and 60°, implying the stability of Bernal-stacking and the instability of AA-stacking structures, while a long platform in [8,55]° indicates the ease of twisting bilayer graphene in this wide angle range. Significant frequency shifts are observed for the z breathing mode around θ=0° and 60°, while the frequency is a constant in a wide range [8,55]°. Using the z breathing mode, a mechanical nanoresonator is proposed to operate on a robust resonant frequency in terahertz range.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{RafieeRabczukMilanietal.,
  author    = {Rafiee, Roham and Rabczuk, Timon and Milani, Abbas S. and Tserpes, Konstantinos I.},
  title     = {Advances in Characterization and Modeling of Nanoreinforced Composites},
  series = {JOURNAL OF NANOMATERIALS},
  journal   = {JOURNAL OF NANOMATERIALS},
  doi       = {10.1155/2016/9481053},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170411-31134},
  abstract  = {This special issue deals with a range of recently developed characterization and modeling techniques employed to better understand and predict the response of nanoreinforced composites at different scales.},
  subject      = {Physikalische Eigenschaft},
  language  = {en}
}
@article{BudarapuGracieBordasetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon},
  title     = {An adaptive multiscale method for quasi-static crack growth},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  doi       = {10.1007/s00466-013-0952-6},
  pages     = {1129 -- 1148},
  abstract  = {This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom-atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenXuanLiuBordasetal.,
  author    = {Nguyen-Xuan, Hung and Liu, G.R. and Bordas, St{\´e}phane Pierre Alain and Natarajan, S. and Rabczuk, Timon},
  title     = {An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {252 -- 273},
  abstract  = {An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhMuthuZhuangetal.,
  author    = {Nguyen-Thanh, Nhon and Muthu, Jacob and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {369 -- 385},
  abstract  = {An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhRabczukNguyenXuanetal.,
  author    = {Nguyen-Thanh, Nhon and Rabczuk, Timon and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain},
  title     = {An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes},
  series = {Journal of Computational and Applied Mathematics},
  journal   = {Journal of Computational and Applied Mathematics},
  pages     = {2112 -- 2135},
  abstract  = {An alternative alpha finite element method (A?FEM) free and forced vibration analysis of solids using triangular meshes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhRabczukNguyenXuanetal.,
  author    = {Nguyen-Thanh, Nhon and Rabczuk, Timon and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain},
  title     = {An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates},
  series = {Finite Elements in Analysis \& Design},
  journal   = {Finite Elements in Analysis \& Design},
  pages     = {519 -- 535},
  abstract  = {An alternative alpha finite element method with stabilized discrete shear gap technique for analysis of Mindlin-Reissner plates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasPintodaCostaRabczuketal.,
  author    = {Areias, Pedro and Pinto da Costa, A. and Rabczuk, Timon and Queiros de Melo, F. J. M. and Dias-da-Costa, D.},
  title     = {An alternative formulation for quasi-static frictional and cohesive contact problems},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {807 -- 824},
  abstract  = {An alternative formulation for quasi-static frictional and cohesive contact problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoGuoRabczuk,
  author    = {Zhao, Jun-Hua and Guo, Wanlin and Rabczuk, Timon},
  title     = {An analytical molecular mechanics model for the elastic properties of crystalline polyethylene},
  series = {Journal of Applied Physics},
  journal   = {Journal of Applied Physics},
  doi       = {10.1063/1.4745035},
  abstract  = {We present an analytical model to relate the elastic properties of crystalline polyethylene based on a molecular mechanics approach. Along the polymer chains direction, the united-atom (UA) CH2-CH2 bond stretching, angle bending potentials are replaced with equivalent Euler-Bernoulli beams. Between any two polymer chains, the explicit formulae are derived for the van der Waals interaction represented by the linear springs of different stiffness. Then, the nine independent elastic constants are evaluated systematically using the formulae. The analytical model is finally validated by present united-atom molecular dynamics (MD) simulations and against available all-atom molecular dynamics results in the literature. The established analytical model provides an efficient route for mechanical characterization of crystalline polymers and related materials.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhangZhaoJiaetal.,
  author    = {Zhang, Yancheng and Zhao, Jun-Hua and Jia, Yue and Mabrouki, Tarek and Gong, Yadong and Wei, Ning and Rabczuk, Timon},
  title     = {An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase},
  series = {Composite Structures},
  journal   = {Composite Structures},
  pages     = {261 -- 269},
  abstract  = {An analytical solution on the interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThoiPhungVanRabczuketal.,
  author    = {Nguyen-Thoi, T. and Phung-Van, P. and Rabczuk, Timon and Nguyen-Xuan, Hung and Le-Van, C.},
  title     = {An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems},
  series = {International Journal of Computational Methods},
  journal   = {International Journal of Computational Methods},
  abstract  = {An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{PhanDaoNguyenXuanThaiHoangetal.,
  author    = {Phan-Dao, H. and Nguyen-Xuan, Hung and Thai-Hoang, C. and Nguyen-Thoi, T. and Rabczuk, Timon},
  title     = {An edge-based smoothed finite element method for analysis of laminated composite plates},
  series = {International Journal of Computational Methods},
  journal   = {International Journal of Computational Methods},
  abstract  = {An edge-based smoothed finite element method for analysis of laminated composite plates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhValizadehNguyenetal.,
  author    = {Nguyen-Thanh, Nhon and Valizadeh, Navid and Nguyen, Manh Hung and Nguyen-Xuan, Hung and Zhuang, Xiaoying and Areias, Pedro and Zi, Goangseup and Bazilevs, Yuri and De Lorenzis, Laura and Rabczuk, Timon},
  title     = {An extended isogeometric thin shell analysis based on Kirchhoff-Love theory},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {265 -- 291},
  abstract  = {An extended isogeometric thin shell analysis based on Kirchho_-Love theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MosaviNajafiFaizollahzadehArdabilietal.,
  author    = {Mosavi, Amir and Najafi, Bahman and Faizollahzadeh Ardabili, Sina and Shamshirband, Shahaboddin and Rabczuk, Timon},
  title     = {An Intelligent Artificial Neural Network-Response Surface Methodology Method for Accessing the Optimum Biodiesel and Diesel Fuel Blending Conditions in a Diesel Engine from the Viewpoint of Exergy and Energy Analysis},
  series = {Energies},
  volume    = {2018},
  journal   = {Energies},
  number    = {11, 4},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/en11040860},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180507-37467},
  pages     = {18},
  abstract  = {Biodiesel, as the main alternative fuel to diesel fuel which is produced from renewable and available resources, improves the engine emissions during combustion in diesel engines. In this study, the biodiesel is produced initially from waste cooking oil (WCO). The fuel samples are applied in a diesel engine and the engine performance has been considered from the viewpoint of exergy and energy approaches. Engine tests are performed at a constant 1500 rpm speed with various loads and fuel samples. The obtained experimental data are also applied to develop an artificial neural network (ANN) model. Response surface methodology (RSM) is employed to optimize the exergy and energy efficiencies. Based on the results of the energy analysis, optimal engine performance is obtained at 80\% of full load in presence of B10 and B20 fuels. However, based on the exergy analysis results, optimal engine performance is obtained at 80\% of full load in presence of B90 and B100 fuels. The optimum values of exergy and energy efficiencies are in the range of 25-30\% of full load, which is the same as the calculated range obtained from mathematical modeling.},
  subject      = {Biodiesel},
  language  = {en}
}
@article{SimpsonBordasTrevelyanetal.,
  author    = {Simpson, R. and Bordas, St{\´e}phane Pierre Alain and Trevelyan, J. and Kerfriden, Pierre and Rabczuk, Timon},
  title     = {An Isogeometric Boundary Element Method for elastostatic analysis},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  doi       = {10.1016/j.cma.2011.08.008},
  abstract  = {The concept of isogeometric analysis, where functions that are used to describe geometry in CAD software are used to approximate the unknown fields in numerical simulations, has received great attention in recent years. The method has the potential to have profound impact on engineering design, since the task of meshing, which in some cases can add significant overhead, has been circumvented. Much of the research effort has been focused on finite element implementations of the isogeometric concept, but at present, little has been seen on the application to the Boundary Element Method. The current paper proposes an Isogeometric Boundary Element Method (BEM), which we term IGABEM, applied to two-dimensional elastostatic problems using Non-Uniform Rational B-Splines (NURBS). We find it is a natural fit with the isogeometric concept since both the NURBS approximation and BEM deal with quantities entirely on the boundary. The method is verified against analytical solutions where it is seen that superior accuracies are achieved over a conventional quadratic isoparametric BEM implementation.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AnitescuJiaZhangetal.,
  author    = {Anitescu, Cosmin and Jia, Yue and Zhang, Yongjie and Rabczuk, Timon},
  title     = {An isogeometric collocation method using superconvergent points},
  series = {Computer Methods in Applied Mechanics and Engineer-ing},
  journal   = {Computer Methods in Applied Mechanics and Engineer-ing},
  pages     = {1073 -- 1097},
  abstract  = {An isogeometric collocation method using superconvergent points},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GuoZhuangChenetal.,
  author    = {Guo, Hongwei and Zhuang, Xiaoying and Chen, Pengwan and Alajlan, Naif and Rabczuk, Timon},
  title     = {Analysis of three-dimensional potential problems in non-homogeneous media with physics-informed deep collocation method using material transfer learning and sensitivity analysis},
  series = {Engineering with Computers},
  volume    = {2022},
  journal   = {Engineering with Computers},
  doi       = {10.1007/s00366-022-01633-6},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220811-46764},
  pages     = {1 -- 22},
  abstract  = {In this work, we present a deep collocation method (DCM) for three-dimensional potential problems in non-homogeneous media. This approach utilizes a physics-informed neural network with material transfer learning reducing the solution of the non-homogeneous partial differential equations to an optimization problem. We tested different configurations of the physics-informed neural network including smooth activation functions, sampling methods for collocation points generation and combined optimizers. A material transfer learning technique is utilized for non-homogeneous media with different material gradations and parameters, which enhance the generality and robustness of the proposed method. In order to identify the most influential parameters of the network configuration, we carried out a global sensitivity analysis. Finally, we provide a convergence proof of our DCM. The approach is validated through several benchmark problems, also testing different material variations.},
  subject      = {Deep learning},
  language  = {en}
}
@article{RabizadehSaboorBagherzadehRabczuk,
  author    = {Rabizadeh, Ehsan and Saboor Bagherzadeh, Amir and Rabczuk, Timon},
  title     = {Application of goal-oriented error estimation and adaptive mesh refinement on thermo-mechanical multifield problems},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {27 -- 44},
  abstract  = {Application of goal-oriented error estimation and adaptive mesh re_nement on thermo-mechanical multi_eld problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukDiasdaCosta,
  author    = {Areias, Pedro and Rabczuk, Timon and Dias-da-Costa, D.},
  title     = {Assumed-metric spherically-interpolated quadrilateral shell element},
  series = {Finite Elements in Analysis and Design},
  journal   = {Finite Elements in Analysis and Design},
  pages     = {53 -- 67},
  abstract  = {Assumed-metric spherically-interpolated quadrilateral shell element},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukDiasdaCosta,
  author    = {Areias, Pedro and Rabczuk, Timon and Dias-da-Costa, D.},
  title     = {Asymmetric Shell Elements Based on a Corrected Updated-Lagrangian Approach},
  series = {CMES: Computer Modeling in Engineering and Sciences},
  journal   = {CMES: Computer Modeling in Engineering and Sciences},
  abstract  = {Asymmetric Shell Elements Based on a Corrected Updated-Lagrangian Approach},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoLuRabczuk,
  author    = {Zhao, Jun-Hua and Lu, Lixin and Rabczuk, Timon},
  title     = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines},
  series = {The Journal of Chemical Physics},
  journal   = {The Journal of Chemical Physics},
  doi       = {10.1063/1.4878115},
  abstract  = {Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoJiaWeietal.,
  author    = {Zhao, Jun-Hua and Jia, Yue and Wei, Ning and Rabczuk, Timon},
  title     = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes},
  series = {Journal of Applied Mechanics},
  journal   = {Journal of Applied Mechanics},
  abstract  = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JoshiHildebrandAloraieretal.,
  author    = {Joshi, Suraj and Hildebrand, J{\"o}rg and Aloraier, Abdulkareem S. and Rabczuk, Timon},
  title     = {Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  doi       = {10.1016/j.commatsci.2012.11.029},
  pages     = {559 -- 565},
  abstract  = {This paper presents several aspects of characterization of welding heat source parameters in Goldak's double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40\% to 80\% in increments of 10\%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak's double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoJiangWangetal.,
  author    = {Zhao, Jiyun and Jiang, Jin-Wu and Wang, L. and Guo, Wanlin and Rabczuk, Timon},
  title     = {Coarse-grained potentials of single-walled carbon nanotubes},
  series = {Journal of the Mechanics and Physics of Solids},
  journal   = {Journal of the Mechanics and Physics of Solids},
  abstract  = {Coarse-grained potentials of single-walled carbon nanotubes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenXuanRabczukNguyenThoietal.,
  author    = {Nguyen-Xuan, Hung and Rabczuk, Timon and Nguyen-Thoi, T. and Tran, T. and Nguyen-Thanh, Nhon},
  title     = {Computation of limit and shakedown loads using a node-based smoothed finite element method},
  series = {International Journal for Numerical Methods in Engineering},
  journal   = {International Journal for Numerical Methods in Engineering},
  doi       = {10.1002/nme.3317},
  pages     = {287 -- 310},
  abstract  = {This paper presents a novel numerical procedure for computing limit and shakedown loads of structures using a node-based smoothed FEM in combination with a primal-dual algorithm. An associated primal-dual form based on the von Mises yield criterion is adopted. The primal-dual algorithm together with a Newton-like iteration are then used to solve this associated primal-dual form to determine simultaneously both approximate upper and quasi-lower bounds of the plastic collapse limit and the shakedown limit. The present formulation uses only linear approximations and its implementation into finite element programs is quite simple. Several numerical examples are given to show the reliability, accuracy, and generality of the present formulation compared with other available methods.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{LeNguyenXuanAskesetal.,
  author    = {Le, C.V. and Nguyen-Xuan, Hung and Askes, H. and Rabczuk, Timon and Nguyen-Thoi, T.},
  title     = {Computation of limit load using edge-based smoothed finite element method and second-order cone programming},
  series = {International Journal of Computational Methods},
  journal   = {International Journal of Computational Methods},
  abstract  = {Computation of limit load using edge-based smoothed finite element method and second-order cone programming},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiSilaniRabczuk,
  author    = {Talebi, Hossein and Silani, Mohammad and Rabczuk, Timon},
  title     = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  series = {Advances in Engineering Software},
  journal   = {Advances in Engineering Software},
  pages     = {82 -- 92},
  abstract  = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoLuZhangetal.,
  author    = {Zhao, Jun-Hua and Lu, Lixin and Zhang, Zhiliang and Guo, Wanlin and Rabczuk, Timon},
  title     = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {432 -- 438},
  abstract  = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukQueirosdeMeloetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Queiros de Melo, F. J. M. and Cesar de Sa, J.M.},
  title     = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {57 -- 72},
  abstract  = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerRabczuk,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Detection of flaws in piezoelectric structures using extended FEM},
  series = {International Journal for Numerical Methods in Engineering},
  journal   = {International Journal for Numerical Methods in Engineering},
  pages     = {373 -- 389},
  abstract  = {Detection of flaws in piezoelectric structures using extended FEM},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  pages     = {153 -- 176},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerRabczuk,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  series = {International Journal for Numerical Methods in Engineering},
  journal   = {International Journal for Numerical Methods in Engineering},
  pages     = {960},
  abstract  = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerRabczuk,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {98 -- 112},
  abstract  = {Detection of multiple flaws in piezoelectric structures using XFEM and level sets},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{KhosravaniRabczuk,
  author    = {Khosravani, M.R. and Rabczuk, Timon},
  title     = {Determiniation of shear modulus for double and multi-walled Carbon Nanotubes},
  series = {Mechanics of Composite Materials},
  journal   = {Mechanics of Composite Materials},
  abstract  = {Determiniation of shear modulus for double and multi-walled Carbon Nanotubes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{BudarapuNarayanaRammohanetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Narayana, T.S.S. and Rammohan, B. and Rabczuk, Timon},
  title     = {Directionality of sound radiation from rectangular panels},
  series = {Applied Acoustics},
  journal   = {Applied Acoustics},
  pages     = {128 -- 140},
  abstract  = {Directionality of sound radiation from rectangular panels},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ChakrabortyAnitescuZhuangetal.,
  author    = {Chakraborty, Ayan and Anitescu, Cosmin and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Domain adaptation based transfer learning approach for solving PDEs on complex geometries},
  series = {Engineering with Computers},
  volume    = {2022},
  journal   = {Engineering with Computers},
  doi       = {10.1007/s00366-022-01661-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220811-46776},
  pages     = {1 -- 20},
  abstract  = {In machine learning, if the training data is independently and identically distributed as the test data then a trained model can make an accurate predictions for new samples of data. Conventional machine learning has a strong dependence on massive amounts of training data which are domain specific to understand their latent patterns. In contrast, Domain adaptation and Transfer learning methods are sub-fields within machine learning that are concerned with solving the inescapable problem of insufficient training data by relaxing the domain dependence hypothesis. In this contribution, this issue has been addressed and by making a novel combination of both the methods we develop a computationally efficient and practical algorithm to solve boundary value problems based on nonlinear partial differential equations. We adopt a meshfree analysis framework to integrate the prevailing geometric modelling techniques based on NURBS and present an enhanced deep collocation approach that also plays an important role in the accuracy of solutions. We start with a brief introduction on how these methods expand upon this framework. We observe an excellent agreement between these methods and have shown that how fine-tuning a pre-trained network to a specialized domain may lead to an outstanding performance compare to the existing ones. As proof of concept, we illustrate the performance of our proposed model on several benchmark problems.},
  subject      = {Maschinelles Lernen},
  language  = {en}
}
@article{RabczukZhuangOterkus,
  author    = {Rabczuk, Timon and Zhuang, Xiaoying and Oterkus, Erkan},
  title     = {Editorial: Computational modeling based on nonlocal theory},
  series = {Engineering with Computers},
  volume    = {2023},
  journal   = {Engineering with Computers},
  number    = {Volume 39, issue 3},
  publisher = {Springer},
  address   = {London},
  doi       = {https://doi.org/10.1007/s00366-022-01775-7},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63658},
  pages     = {1},
  abstract  = {Nonlocal theories concern the interaction of objects, which are separated in space. Classical examples are Coulomb's law or Newton's law of universal gravitation. They had signficiant impact in physics and engineering. One classical application in mechanics is the failure of quasi-brittle materials. While local models lead to an ill-posed boundary value problem and associated mesh dependent results, nonlocal models guarantee the well-posedness and are furthermore relatively easy to implement into commercial computational software.},
  subject      = {Computersimulation},
  language  = {en}
}
@article{ZhangZhaoWeietal.,
  author    = {Zhang, Yancheng and Zhao, Jiyun and Wei, Ning and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer},
  series = {Composites Part B: Engineering},
  journal   = {Composites Part B: Engineering},
  pages     = {1714 -- 1721},
  abstract  = {Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{BudarapuGracieYangetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Gracie, Robert and Yang, Shih-Wei and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Efficient Coarse Graining in Multiscale Modeling of Fracture},
  series = {Theoretical and Applied Fracture Mechanics},
  journal   = {Theoretical and Applied Fracture Mechanics},
  pages     = {126 -- 143},
  abstract  = {Efficient Coarse Graining in Multiscale Modeling of Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangParkRabczuk,
  author    = {Jiang, Jin-Wu and Park, Harold S. and Rabczuk, Timon},
  title     = {Enhancing the mass sensitivity of graphene nanoresonators via nonlinear oscillations: The effective strain mechanism},
  series = {Nanotechnology},
  journal   = {Nanotechnology},
  abstract  = {Enhancing the mass sensitivity of graphene nanoresonators via nonlinear oscillations: The effective strain mechanism},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AmaniBagherzadehRabczuk,
  author    = {Amani, Jafar and Bagherzadeh, Amir Saboor and Rabczuk, Timon},
  title     = {Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  abstract  = {Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AmaniSaboorBagherzadehRabczuk,
  author    = {Amani, Jafar and Saboor Bagherzadeh, Amir and Rabczuk, Timon},
  title     = {Error estimate and adaptive refinement in mixed discrete least squares meshless method},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  doi       = {10.1155/2014/721240},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31181},
  abstract  = {The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method.},
  subject      = {Elastizit{\"a}t},
  language  = {en}
}
@article{ChenNguyenThanhNguyenXuanetal.,
  author    = {Chen, Lei and Nguyen-Thanh, Nhon and Nguyen-Xuan, Hung and Rabczuk, Timon and Bordas, St{\´e}phane Pierre Alain and Limbert, Georges},
  title     = {Explicit finite deformation analysis of isogeometric membranes},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {104 -- 130},
  abstract  = {Explicit finite deformation analysis of isogeometric membranes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenVinhBakarMsekhetal.,
  author    = {Nguyen-Vinh, H. and Bakar, I. and Msekh, Mohammed Abdulrazzak and Song, Jeong-Hoon and Muthu, Jacob and Zi, Goangseup and Le, P. and Bordas, St{\´e}phane Pierre Alain and Simpson, R. and Natarajan, S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Extended Finite Element Method for Dynamic Fracture of Piezo-Electric Materials},
  series = {Engineering Fracture Mechanics},
  journal   = {Engineering Fracture Mechanics},
  doi       = {10.1016/j.engfracmech.2012.04.025},
  pages     = {19 -- 31},
  abstract  = {We present an extended finite element formulation for dynamic fracture of piezo-electric materials. The method is developed in the context of linear elastic fracture mechanics. It is applied to mode I and mixed mode-fracture for quasi-steady cracks. An implicit time integration scheme is exploited. The results are compared to results obtained with the boundary element method and show excellent agreement.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ChenRabczukLiuetal.,
  author    = {Chen, Lei and Rabczuk, Timon and Liu, G.R. and Zeng, K.Y. and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain},
  title     = {Extended finite element method with edge-based strain smoothing (ESm-XFEM) for linear elastic crack growth},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  doi       = {10.1016/j.cma.2011.08.013},
  abstract  = {This paper presents a strain smoothing procedure for the extended finite element method (XFEM). The resulting "edge-based" smoothed extended finite element method (ESm-XFEM) is tailored to linear elastic fracture mechanics and, in this context, to outperform the standard XFEM. In the XFEM, the displacement-based approximation is enriched by the Heaviside and asymptotic crack tip functions using the framework of partition of unity. This eliminates the need for the mesh alignment with the crack and re-meshing, as the crack evolves. Edge-based smoothing (ES) relies on a generalized smoothing operation over smoothing domains associated with edges of simplex meshes, and produces a softening effect leading to a close-to-exact stiffness, "super-convergence" and "ultra-accurate" solutions. The present method takes advantage of both the ES-FEM and the XFEM. Thanks to the use of strain smoothing, the subdivision of elements intersected by discontinuities and of integrating the (singular) derivatives of the approximation functions is suppressed via transforming interior integration into boundary integration. Numerical examples show that the proposed method improves significantly the accuracy of stress intensity factors and achieves a near optimal convergence rate in the energy norm even without geometrical enrichment or blending correction.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiaAnitescuGhorashietal.,
  author    = {Jia, Yue and Anitescu, Cosmin and Ghorashi, Seyed Shahram and Rabczuk, Timon and Dias-da-Costa, D.},
  title     = {Extended Isogeometric Analysis for Material Interface Problems},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  abstract  = {Extended Isogeometric Analysis for Material Interface Problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukCamanho,
  author    = {Areias, Pedro and Rabczuk, Timon and Camanho, P.P.},
  title     = {Finite strain fracture of 2D problems with injected anisotropic softening elements},
  series = {Theoretical and Applied Fracture Mechanics},
  journal   = {Theoretical and Applied Fracture Mechanics},
  abstract  = {Finite strain fracture of 2D problems with injected anisotropic softening elements},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczuk,
  author    = {Areias, Pedro and Rabczuk, Timon},
  title     = {Finite strain fracture of plates and shells with configurational forces and edge rotation},
  series = {International Journal for Numerical Methods in Engineering},
  journal   = {International Journal for Numerical Methods in Engineering},
  abstract  = {Finite strain fracture of plates and shells with configurational forces and edge rotation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukCesardeSaetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Garcao, J.E.},
  title     = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  series = {Finite Elements in Analysis and Design},
  journal   = {Finite Elements in Analysis and Design},
  pages     = {26 -- 40},
  abstract  = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThoiPhungVanRabczuketal.,
  author    = {Nguyen-Thoi, T. and Phung-Van, P. and Rabczuk, Timon and Nguyen-Xuan, Hung and Le-Van, C.},
  title     = {Free and forced vibration analysis using the n-sided polygonal cell-based smoothed finite element method (nCS-FEM)},
  series = {International Journal of Computational Methods},
  journal   = {International Journal of Computational Methods},
  abstract  = {Free and forced vibration analysis using the n-sided polygonal cell-based smoothed finite element method (nCS-FEM)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThoiRabczukLamPhatetal.,
  author    = {Nguyen-Thoi, T. and Rabczuk, Timon and Lam-Phat, T. and Ho-Huu, V. and Phung-Van, P.},
  title     = {Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3)},
  series = {Theoretical and Applied Fracture Mechanics},
  journal   = {Theoretical and Applied Fracture Mechanics},
  abstract  = {Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{XuMourrainGalligoetal.,
  author    = {Xu, G. and Mourrain, B. and Galligo, A. and Rabczuk, Timon},
  title     = {High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  abstract  = {High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukDiasdaCostaetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Dias-da-Costa, D. and Piresh, E.B.},
  title     = {Implicit solutions with consistent additive and multiplicative components},
  series = {Finite Elements in Analysis and Design},
  journal   = {Finite Elements in Analysis and Design},
  doi       = {10.1016/j.finel.2012.03.007},
  pages     = {15 -- 31},
  abstract  = {This work describes an algorithm and corresponding software for incorporating general nonlinear multiple-point equality constraints in a implicit sparse direct solver. It is shown that direct addressing of sparse matrices is possible in general circumstances, circumventing the traditional linear or binary search for introducing (generalized) constituents to a sparse matrix. Nested and arbitrarily interconnected multiple-point constraints are introduced by processing of multiplicative constituents with a built-in topological ordering of the resulting directed graph. A classification of discretization methods is performed and some re-classified problems are described and solved under this proposed perspective. The dependence relations between solution methods, algorithms and constituents becomes apparent. Fracture algorithms can be naturally casted in this framework. Solutions based on control equations are also directly incorporated as equality constraints. We show that arbitrary constituents can be used as long as the resulting directed graph is acyclic. It is also shown that graph partitions and orderings should be performed in the innermost part of the algorithm, a fact with some peculiar consequences. The core of our implicit code is described, specifically new algorithms for direct access of sparse matrices (by means of the clique structure) and general constituent processing. It is demonstrated that the graph structure of the second derivatives of the equality constraints are cliques (or pseudo-elements) and are naturally included as such. A complete algorithm is presented which allows a complete automation of equality constraints, avoiding the need of pre-sorting. Verification applications in four distinct areas are shown: single and multiple rigid body dynamics, solution control and computational fracture.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiKerfridenBordasetal.,
  author    = {Ghasemi, Hamid and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain and Muthu, Jacob and Zi, Goangseup and Rabczuk, Timon},
  title     = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  series = {Composite Structures},
  journal   = {Composite Structures},
  pages     = {221 -- 230},
  abstract  = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ThaiFerreiraBordasetal.,
  author    = {Thai, Chien H. and Ferreira, A.J.M. and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon and Nguyen-Xuan, Hung},
  title     = {Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory},
  series = {European Journal of Mechanics},
  journal   = {European Journal of Mechanics},
  pages     = {89 -- 108},
  abstract  = {Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ThaiNguyenXuanBordasetal.,
  author    = {Thai, Chien H. and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain and Nguyen-Thanh, Nhon and Rabczuk, Timon},
  title     = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  series = {Mechanics of Advanced Materials and Structures},
  journal   = {Mechanics of Advanced Materials and Structures},
  pages     = {451 -- 469},
  abstract  = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenKerfridenBordasetal.,
  author    = {Nguyen, V.P. and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon},
  title     = {Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm},
  series = {Computer-Aided Design},
  journal   = {Computer-Aided Design},
  abstract  = {Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NguyenThanhNguyenXuanBordasetal.,
  author    = {Nguyen-Thanh, Nhon and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain and Rabczuk, Timon},
  title     = {Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {1892 -- 1908},
  abstract  = {Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhangZhuangMuthuetal.,
  author    = {Zhang, Yancheng and Zhuang, Xiaoying and Muthu, Jacob and Mabrouki, Tarek and Fontaine, Micha{\"e}l and Gong, Yadong and Rabczuk, Timon},
  title     = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation},
  series = {Composites Part B Engineering},
  journal   = {Composites Part B Engineering},
  pages     = {27 -- 33},
  abstract  = {Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangRabczuk,
  author    = {Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Mechanical Oscillation of Kinked Silicon Nanowires: a Natural Nanoscale Spring},
  series = {Applied Physics Letters},
  journal   = {Applied Physics Letters},
  abstract  = {Mechanical Oscillation of Kinked Silicon Nanowires: a Natural Nanoscale Spring},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviCunibertiRabczuk,
  author    = {Mortazavi, Bohayra and Cuniberti, G. and Rabczuk, Timon},
  title     = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {285 -- 289},
  abstract  = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoWeiFanetal.,
  author    = {Zhao, Jun-Hua and Wei, Ning and Fan, Z. and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Mechanical properties of three types of carbon allotropes},
  series = {Nanotechnology},
  journal   = {Nanotechnology},
  abstract  = {Mechanical properties of three types of carbon allotropes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{KumarSinghMishraetal.,
  author    = {Kumar, S. and Singh, I. and Mishra, B.K. and Rabczuk, Timon},
  title     = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {1425 -- 1466},
  abstract  = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviPereiraJiangetal.,
  author    = {Mortazavi, Bohayra and Pereira, Luiz Felipe C. and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Modelling heat conduction in polycrystalline hexagonal boron-nitride films},
  series = {Scientific Reports},
  journal   = {Scientific Reports},
  doi       = {10.1038/srep13228},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31534},
  abstract  = {We conducted extensive molecular dynamics simulations to investigate the thermal conductivity of polycrystalline hexagonal boron-nitride (h-BN) films. To this aim, we constructed large atomistic models of polycrystalline h-BN sheets with random and uniform grain configuration. By performing equilibrium molecular dynamics (EMD) simulations, we investigated the influence of the average grain size on the thermal conductivity of polycrystalline h-BN films at various temperatures. Using the EMD results, we constructed finite element models of polycrystalline h-BN sheets to probe the thermal conductivity of samples with larger grain sizes. Our multiscale investigations not only provide a general viewpoint regarding the heat conduction in h-BN films but also propose that polycrystalline h-BN sheets present high thermal conductivity comparable to monocrystalline sheets.},
  subject      = {W{\"a}rmeleitf{\"a}higkeit},
  language  = {en}
}
@article{JiangRabczuk,
  author    = {Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Modulation of Thermal Conductivity in kinked Silicon Nanowires: Phonon interchanging and pinching effects or Reduction of thermal conductivity in kinked silicon nanowire superlattices},
  series = {Nano Letters},
  journal   = {Nano Letters},
  abstract  = {Modulation of Thermal Conductivity in kinked Silicon Nanowires: Phonon interchanging and pinching effects or Reduction of thermal conductivity in kinked silicon nanowire superlattices},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiSilaniBordasetal.,
  author    = {Talebi, Hossein and Silani, Mohammad and Bordas, St{\´e}phane Pierre Alain and Kerfriden, Pierre and Rabczuk, Timon},
  title     = {Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture},
  series = {International Journal for Multiscale Computational Engineering},
  journal   = {International Journal for Multiscale Computational Engineering},
  abstract  = {Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiangParkRabczuk,
  author    = {Jiang, Jin-Wu and Park, Harold S. and Rabczuk, Timon},
  title     = {MoS2 nanoresonators: intrinsically better than graphene?},
  series = {Nanoscale},
  journal   = {Nanoscale},
  pages     = {3618 -- 3625},
  abstract  = {MoS2 nanoresonators: intrinsically better than graphene?},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{IlyaniAkmarKramerRabczuk,
  author    = {Ilyani Akmar, A.B. and Kramer, O. and Rabczuk, Timon},
  title     = {Multi-objective evolutionary optimization of sandwich structures: An evaluation by elitist non-dominated sorting evolution strategy},
  series = {American Journal of Engineering and Applied Sciences},
  journal   = {American Journal of Engineering and Applied Sciences},
  doi       = {10.3844/ajeassp.2015.185.201},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170418-31402},
  pages     = {185 -- 201},
  abstract  = {In this study, an application of evolutionary multi-objective optimization algorithms on the optimization of sandwich structures is presented. The solution strategy is known as Elitist Non-Dominated Sorting Evolution Strategy (ENSES) wherein Evolution Strategies (ES) as Evolutionary Algorithm (EA) in the elitist Non-dominated Sorting Genetic algorithm (NSGA-II) procedure. Evolutionary algorithm seems a compatible approach to resolve multi-objective optimization problems because it is inspired by natural evolution, which closely linked to Artificial Intelligence (AI) techniques and elitism has shown an important factor for improving evolutionary multi-objective search. In order to evaluate the notion of performance by ENSES, the well-known study case of sandwich structures are reconsidered. For Case 1, the goals of the multi-objective optimization are minimization of the deflection and the weight of the sandwich structures. The length, the core and skin thicknesses are the design variables of Case 1. For Case 2, the objective functions are the fabrication cost, the beam weight and the end deflection of the sandwich structures. There are four design variables i.e., the weld height, the weld length, the beam depth and the beam width in Case 2. Numerical results are presented in terms of Paretooptimal solutions for both evaluated cases.},
  subject      = {Optimierung},
  language  = {en}
}
@article{ZhangNanthakumarLahmeretal.,
  author    = {Zhang, Chao and Nanthakumar, S.S. and Lahmer, Tom and Rabczuk, Timon},
  title     = {Multiple cracks identification for piezoelectric structures},
  series = {International Journal of Fracture},
  journal   = {International Journal of Fracture},
  pages     = {1 -- 19},
  abstract  = {Multiple cracks identification for piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviRabczuk,
  author    = {Mortazavi, Bohayra and Rabczuk, Timon},
  title     = {Multiscale modeling of heat conduction in graphene laminates},
  series = {Carbon},
  journal   = {Carbon},
  pages     = {1 -- 7},
  abstract  = {Multiscale modeling of heat conduction in graphene laminates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NooriMortazaviKeshtkarietal.,
  author    = {Noori, Hamidreza and Mortazavi, Bohayra and Keshtkari, Leila and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {Nanopore creation in MoS2 and graphene monolayers by nanoparticles impact: a reactive molecular dynamics study},
  series = {Applied Physics A},
  volume    = {2021},
  journal   = {Applied Physics A},
  number    = {volume 127, article 541},
  publisher = {Springer},
  address   = {Heidelberg},
  doi       = {10.1007/s00339-021-04693-5},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44756},
  pages     = {1 -- 13},
  abstract  = {In this work, extensive reactive molecular dynamics simulations are conducted to analyze the nanopore creation by nano-particles impact over single-layer molybdenum disulfide (MoS2) with 1T and 2H phases. We also compare the results with graphene monolayer. In our simulations, nanosheets are exposed to a spherical rigid carbon projectile with high initial velocities ranging from 2 to 23 km/s. Results for three different structures are compared to examine the most critical factors in the perforation and resistance force during the impact. To analyze the perforation and impact resistance, kinetic energy and displacement time history of the projectile as well as perforation resistance force of the projectile are investigated. Interestingly, although the elasticity module and tensile strength of the graphene are by almost five times higher than those of MoS2, the results demonstrate that 1T and 2H-MoS2 phases are more resistive to the impact loading and perforation than graphene. For the MoS2nanosheets, we realize that the 2H phase is more resistant to impact loading than the 1T counterpart. Our reactive molecular dynamics results highlight that in addition to the strength and toughness, atomic structure is another crucial factor that can contribute substantially to impact resistance of 2D materials. The obtained results can be useful to guide the experimental setups for the nanopore creation in MoS2or other 2D lattices.},
  subject      = {Nanomechanik},
  language  = {en}
}
@article{ArashRabczukJiang,
  author    = {Arash, Behrouz and Rabczuk, Timon and Jiang, Jin-Wu},
  title     = {Nanoresonators and their applications: a state of the art review},
  series = {Applied Physics Reviews},
  journal   = {Applied Physics Reviews},
  abstract  = {Nanoresonators and their applications: a state of the art review},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{RenZhuangOterkusetal.,
  author    = {Ren, Huilong and Zhuang, Xiaoying and Oterkus, Erkan and Zhu, Hehua and Rabczuk, Timon},
  title     = {Nonlocal strong forms of thin plate, gradient elasticity, magneto-electro-elasticity and phase-field fracture by nonlocal operator method},
  series = {Engineering with Computers},
  volume    = {2021},
  journal   = {Engineering with Computers},
  doi       = {10.1007/s00366-021-01502-8},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211207-45388},
  pages     = {1 -- 22},
  abstract  = {The derivation of nonlocal strong forms for many physical problems remains cumbersome in traditional methods. In this paper, we apply the variational principle/weighted residual method based on nonlocal operator method for the derivation of nonlocal forms for elasticity, thin plate, gradient elasticity, electro-magneto-elasticity and phase-field fracture method. The nonlocal governing equations are expressed as an integral form on support and dual-support. The first example shows that the nonlocal elasticity has the same form as dual-horizon non-ordinary state-based peridynamics. The derivation is simple and general and it can convert efficiently many local physical models into their corresponding nonlocal forms. In addition, a criterion based on the instability of the nonlocal gradient is proposed for the fracture modelling in linear elasticity. Several numerical examples are presented to validate nonlocal elasticity and the nonlocal thin plate.},
  subject      = {Bruchmechanik},
  language  = {en}
}
@article{ValizadehNatarajanGonzalezEstradaetal.,
  author    = {Valizadeh, Navid and Natarajan, S. and Gonzalez-Estrada, O.A. and Rabczuk, Timon and Tinh Quoc, Bui and Bordas, St{\´e}phane Pierre Alain},
  title     = {NURBS-based finite element analysis of functionally graded plates: static bending, vibration, buckling and flutter},
  series = {Composite Structures},
  journal   = {Composite Structures},
  pages     = {309 -- 326},
  abstract  = {NURBS-based finite element analysis of functionally graded plates: static bending, vibration, buckling and flutter},
  subject      = {Angewandte Mathematik},
  language  = {en}
}