@phdthesis{Steffl, author = {Steffl, Jonas}, title = {Business Development and Brand Management - A Reciprocal Relationship}, doi = {10.25643/bauhaus-universitaet.6522}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240109-65221}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {170}, abstract = {Business development and brand management are core functions of a business that fuel corporate growth and drive value for consumers, for companies, and for society. Integrating the two business areas promises synergistic added value that goes beyond their individual impact spectrums. While academic research has collectively advanced our understanding of brand management, research in business development is relatively underrepresented. As a management concept that is of great importance in the corporate world today, the relevance of business development cannot be denied in academia. Moreover, the interrelationship between business development and brand management has been widely neglected. Both business fields benefit from each other, suggesting an exigency for a deeper integration between the two. Towards that goal, this dissertation presents a comprehensive overview of the reciprocal relationship of business development and brand management that further stretches the academic knowledge space. Throughout the doctoral thesis, the author structures this interrelationship, enhances theory for both business areas and their integration, suggests managerial implications and identifies future research directions that require scholarly attention. The doctoral thesis aims to align business development and brand management theory and practice with the realities of the business world. In three research papers, this thesis develops an analysis of the reciprocal relationship of business development and brand management. For this purpose, a variety of methods ranging from a systematic literature review and qualitative work to empirical research employing structural equation modeling and experimental studies are applied. Theoretically, business development, innovation management, brand management and sustainability inform the frame of this work. Finally, this research project aims at contributing to (sustainable) business and brand growth.}, subject = {Marketing}, language = {en} } @misc{Schloth, type = {Master Thesis}, author = {Schloth, Sebastian}, title = {Beitrag zum Einfluss bogenf{\"o}rmiger Deichlinien mit innenliegenden vollkommenen Dichtungssystemen auf die Grundwasserstr{\"o}mung}, doi = {10.25643/bauhaus-universitaet.6518}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240104-65186}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {274}, abstract = {Bei einigen bogenf{\"o}rmig verlaufenden Deichlinien ist es erforderlich, die Standsicherheit des Deiches mit Hilfe innenliegender vollkommener Dichtungssysteme zu verbessern. Diese Art der Deichsanierung hat jedoch Auswirkungen auf die Grundwasserstr{\"o}mung. Im Rahmen der wasserrechtlichen Genehmigungsverfahren ist der zu erwartende Aufstau bzw. die Absenkung des Grundwassers darzulegen. Die Zielsetzung dieser Masterarbeit ist es, hierzu einen Beitrag herauszuarbeiten. Dazu werden im ersten Schritt die erforderlichen Grundlagen erl{\"a}utert. In einem zweiten Schritt werden mit wasserbaulichen/wasserwirtschaftlichen Methoden der Flussverlauf des Rheins in Nordrhein-Westfalen anhand von Kartenmaterial ausgewertet und m{\"o}gliche Bogenformen ermittelt. Im dritten Schritt werden f{\"u}r diese Bogenformen unter Variation verschiedener Parameter numerische Berechnungen durchgef{\"u}hrt. Die erhaltenen Ergebnisse werden unter Ber{\"u}cksichtigung der vorhandenen analytischen Berechnungsverfahren, mit dem Ziel der Ableitung eines Berechnungsansatzes bzw. von Anwendungsdiagrammen, bewertet.}, subject = {Deich}, language = {de} } @phdthesis{Machacek, author = {Machacek, Helen}, title = {Analyse von Einflussfaktoren des Widerstands feink{\"o}rniger B{\"o}den bei hydraulischer Belastung}, doi = {10.25643/bauhaus-universitaet.6523}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240109-65232}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {356}, abstract = {Bisherige Untersuchungen zum hydraulischen Grundbruch im bindigen Baugrund haben gezeigt, dass der Versagensmechanismus durch hydraulisch induzierte Risse ausgel{\"o}st wird. Um umstr{\"o}mte Bauwerke im Grundwasser sicher zu dimensionieren, ist daher ein Nachweis gegen hydraulisch induzierte Rissentstehung unerl{\"a}sslich. Ein solcher existiert bisher jedoch nicht, da die Rissentstehung in bindigen B{\"o}den {\"a}ußerst komplex ist und die zahlreichen Einflussgr{\"o}ßen nicht ausreichend untersucht sind. Aus diesem Grund wurde im Rahmen dieser Dissertation eine Laborstudie zu hydraulisch induzierter Rissbildung in verschiedenen feink{\"o}rnigen B{\"o}den in einem neuartigen Triaxialversuch durchgef{\"u}hrt. Aus den zahlreichen Versuchsvarianten lassen sich die wichtigsten Einflussgr{\"o}ßen auf den Widerstand des Bodens gegen Rissentstehung ermitteln. Die experimentelle Arbeit wird durch eine numerische Analyse der Versuchsvariationen erg{\"a}nzt. Daraus l{\"a}sst sich eine Hypothese zur Rissentstehung in bindigen B{\"o}den ableiten, die in Einklang mit der klassischen Bruchmechanik steht.}, subject = {Hydraulischer Grundbruch}, language = {de} } @periodical{BeeKlemsteinHallmannetal., author = {Bee, Julia and Klemstein, Franziska and Hallmann, Lilli and Noeske, Jannik and Bachrach Barzilai, Yael and Bauche, Manuela and Beck, Erik and Logemann, Daniel and Marshall, Danna and Paulus, J{\"o}rg and Schl{\"u}ter, Dorothee and Schubert-Lehnhardt, Viola and Schwoch, Rebecca and Str{\"a}hle, Volker and Stubenvoll, Kerstin and Victor, Kristin and Wagner, Jens-Christian and Welch Guerra, Max}, title = {Auf dem Weg zum Erinnerungsort - das Geb{\"a}ude der NS-Medizinb{\"u}rokratie in Weimar}, editor = {Bee, Julia and Hallmann, Lilli and Klemstein, Franziska and Noeske, Jannik}, doi = {10.25643/bauhaus-universitaet.6461}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231012-64617}, abstract = {Die Bauhausstraße 11 war in der NS-Zeit Sitz von zahlreichen Institutionen der Gesundheitspolitik. Jetzt ist das Geb{\"a}ude zum Gegenstand eines Forschungsprojektes geworden, in Zukunft wird auch vor Ort an seine Einbindung in nationalsozialistische Verbrechen erinnert. Dieses Buch dokumentiert und reflektiert die Erinnerungsarbeit auf dem Campus der Bauhaus-Universit{\"a}t Weimar und dar{\"u}ber hinaus. Anhand der interdisziplin{\"a}ren Beitr{\"a}ge wird das Geb{\"a}ude in der heutigen Bauhausstraße 11 r{\"a}umlich in Weimar und Th{\"u}ringen, erinnerungspolitisch aber in einer seit Jahrzehnten erk{\"a}mpften Landschaft des Gedenkens an nationalsozialistische Verbrechen verortet.}, subject = {Kollektives Ged{\"a}chtnis}, language = {de} } @inproceedings{SchwendnerVoellmeckeHoetal., author = {Schwendner, Sascha and V{\"o}llmecke, Lars and Ho, Ai Phien and Fischer, Jens and Seim, Werner}, title = {TESTING OF CONNECTIONS TAKEN FROM OLD NAILED ROOF TRUSSES}, doi = {10.25643/bauhaus-universitaet.6362}, pages = {8}, abstract = {Experimental testing of nailed connections taken from old roof trusses is presented in this paper. To enable the further use and preservation of nailed roof trusses, it is important to understand how the nail corrosion and aging processes of steel and wood affect the load-bearing capacity and deformation behaviour of such structures. The hypothesis was investigated whether corroded nails allow an increase in load-bearing capacity. Several old and new joints were tested in a first test series, and the results were very promising regarding the initial assumption. However, more tests must be carried out to verify the results.}, subject = {Holzbau}, language = {en} } @article{RabczukZhuangOterkus, author = {Rabczuk, Timon and Zhuang, Xiaoying and Oterkus, Erkan}, title = {Editorial: Computational modeling based on nonlocal theory}, series = {Engineering with Computers}, volume = {2023}, journal = {Engineering with Computers}, number = {Volume 39, issue 3}, publisher = {Springer}, address = {London}, doi = {https://doi.org/10.1007/s00366-022-01775-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63658}, pages = {1}, abstract = {Nonlocal theories concern the interaction of objects, which are separated in space. Classical examples are Coulomb's law or Newton's law of universal gravitation. They had signficiant impact in physics and engineering. One classical application in mechanics is the failure of quasi-brittle materials. While local models lead to an ill-posed boundary value problem and associated mesh dependent results, nonlocal models guarantee the well-posedness and are furthermore relatively easy to implement into commercial computational software.}, subject = {Computersimulation}, language = {en} } @article{WiegandOsburg, author = {Wiegand, Torben and Osburg, Andrea}, title = {Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources}, series = {Polymers}, volume = {2023}, journal = {Polymers}, number = {volume 15, issue 4, article 990}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym15040990}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63745}, pages = {1 -- 12}, abstract = {Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4′-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis.}, subject = {Epoxide}, language = {en} } @article{PartschefeldTutalHalmansederetal., author = {Partschefeld, Stephan and Tutal, Adrian and Halmanseder, Thomas and Schneider, Jens and Osburg, Andrea}, title = {Investigations on Stability of Polycarboxylate Superplasticizers in Alkaline Activators for Geopolymer Binders}, series = {Materials}, volume = {2023}, journal = {Materials}, number = {Volume 16, issue 15, article 5369}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma16155369}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231026-64809}, pages = {1 -- 14}, abstract = {Calcined clays are interesting starting materials to be used as SCMs (supplementary cementitious materials) in cements or to be converted to geopolymers by activation with a high alkaline activator. The adjustment of the properties in the fresh state, especially regarding the consistency of these binders, is almost exclusively achieved by the addition of water, since commercially available superplasticizers seem to be ineffective in low-calcium geopolymer systems. The aim of this study was a systematic investigation of various PCE (polycarboxylate ester/ether) superplasticizers (methacrylate ester PCE: MPEG, isoprenol ether PCE: IPEG, methallyl ether PCE: HPEG) with respect to their stability in different alkaline activators (NaOH, KOH, sodium and potassium silicate solutions). The effectiveness of superplasticizers (SPs) in low-calcium geopolymer binders was verified by rheological tests. Size exclusion chromatography was used to investigate if structural degradation of the superplasticizers occurs. The investigated PCE superplasticizers showed a thickening effect in the low-calcium geopolymer system. Depending on the alkalinity of the activator solution, a degradation process was detected for all the PCEs investigated. The side chains of the PCEs are cleaved off the backbone by basic ester and ether hydrolysis. The highest degree of degradation was found in sodium and potassium silicate solutions. In alkaline hydroxide solutions, the degradation process increases with increasing alkalinity.}, subject = {Geopolymere}, language = {en} } @article{AlsaadSchaelteSchneeweissetal., author = {Alsaad, Hayder and Sch{\"a}lte, Gereon and Schneeweiß, Mario and Becher, Lia and Pollack, Moritz and Gena, Amayu Wakoya and Schweiker, Marcel and Hartmann, Maria and Voelker, Conrad and Rossaint, Rolf and Irrgang, Matthias}, title = {The Spread of Exhaled Air and Aerosols during Physical Exercise}, series = {Journal of Clinical Medicine}, volume = {2023}, journal = {Journal of Clinical Medicine}, number = {Volume 12, issue 4, article 1300}, publisher = {Basel}, address = {MDPI}, doi = {10.3390/jcm12041300}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230208-49262}, pages = {20}, abstract = {Physical exercise demonstrates a special case of aerosol emission due to its associated elevated breathing rate. This can lead to a faster spread of airborne viruses and respiratory diseases. Therefore, this study investigates cross-infection risk during training. Twelve human subjects exercised on a cycle ergometer under three mask scenarios: no mask, surgical mask, and FFP2 mask. The emitted aerosols were measured in a grey room with a measurement setup equipped with an optical particle sensor. The spread of expired air was qualitatively and quantitatively assessed using schlieren imaging. Moreover, user satisfaction surveys were conducted to evaluate the comfort of wearing face masks during training. The results indicated that both surgical and FFP2 masks significantly reduced particles emission with a reduction efficiency of 87.1\% and 91.3\% of all particle sizes, respectively. However, compared to surgical masks, FFP2 masks provided a nearly tenfold greater reduction of the particle size range with long residence time in the air (0.3-0.5 μm). Furthermore, the investigated masks reduced exhalation spreading distances to less than 0.15 m and 0.1 m in the case of the surgical mask and FFP2 mask, respectively. User satisfaction solely differed with respect to perceived dyspnea between no mask and FFP2 mask conditions.}, subject = {Sport}, language = {en} } @article{BrokowLogaKrueger, author = {Brokow-Loga, Anton and Kr{\"u}ger, Timmo}, title = {Potentials of Climate Emergency Declarations for degrowth transformations. The ambivalent stance of German municipalities in conflicts over a post-fossil future}, series = {Raumforschung und Raumordnung}, volume = {2023}, journal = {Raumforschung und Raumordnung}, number = {Vol. 81, No. 5}, publisher = {oekom Verlag}, address = {M{\"u}nchen}, doi = {10.14512/rur.1666}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231204-64984}, pages = {523 -- 537}, abstract = {This paper addresses the scope for action by municipalities in a climate emergency and places it in the framework of ecomodern (urban) policy. We analyse the way in which two German 'climate emergency municipalities' translate conflicts of post-fossil transformation into concrete political and planning strategies. Although more than 2,200 authorities around the world have already declared a climate emergency, research on the impact of these resolutions on the political orientation of municipalities is very limited. Our research focus is on the (potentially agonistic) treatment of conflicts in planning. We argue that in times of a socio-ecological crisis, success in conflict resolution cannot refer to appeasement and depoliticisation. Instead, we propose a framework of five criteria, based on critical theory on ecomodern strategies, planning processes and degrowth. Thus, this practice-related and explorative paper connects empirical insights from the German cities of Constance and Berlin with an innovative normative framework. The findings tell a complex story of an, at least partial, admission of the failure of previous climate mitigation strategies, a lack of social institutions of limits, an instrumental relation to nature and a disregard for social injustices. The paper discusses how municipalities, in the context of ongoing tensions over the post-fossil transformation in Germany, on the one hand hold on to business-as-usual approaches, but on the other hand also set political impulses for change.}, subject = {Stadtentwicklung}, language = {de} } @inproceedings{VoellmeckeSchwendnerHoetal., author = {V{\"o}llmecke, Lars and Schwendner, Sascha and Ho, Ai Phien and Fischer, Jens and Seim, Werner}, title = {Assessment of nailed connections in existing structures}, doi = {10.25643/bauhaus-universitaet.6361}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230609-63615}, pages = {7}, abstract = {This paper presents the development of an assessment scheme for a visual qualitative evaluation of nailed connections in existing structures, such as board trusses. In terms of further use and preservation, a quick visual inspection will help to evaluate the quality of a structure regarding its load-bearing capacity and deformation behaviour. Tests of old and new nailed joints in combination with a rating scheme point out the correlation between the load-bearing capacity and condition of a joint. Old joints of comparatively good condition tend to exhibit better results than those of poor condition. Moreover, aged joints are generally more load-bearing than newly assembled ones.}, subject = {Holzbau}, language = {en} } @article{Suhr, author = {Suhr, Maike}, title = {Diversit{\"a}t und (Anti-)Diskriminierung im Kontext journalistischer Neugr{\"u}ndungen: Eine Forschungsagenda}, series = {Global Media Journal German Edition}, volume = {2023}, journal = {Global Media Journal German Edition}, number = {Volume 13, No 1}, doi = {10.22032/dbt.57907}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231027-64836}, pages = {1 -- 19}, abstract = {Obgleich redaktionelle Diversit{\"a}t regelm{\"a}ßig als eine der Kernherausforderungen f{\"u}r den Journalismus gehandelt wird, tun sich journalistische Organisationen immer noch schwer damit, gleichberechtigte Zugangs-und Entfaltungschancen f{\"u}r Frauen, People of Color, Menschen aus Einwandererfamilien oder auf anderen Ebenen diskriminierungsbetroffene Journalist*innen zu schaffen. Stattdessen zeigt die gender-und diversit{\"a}tsbezogene Redaktionsforschung, dass Redaktionen nach wie vor in ihren Strukturen, Praktiken und in ihrer Kultur gesellschaftliche Machtverh{\"a}ltnisse widerspiegeln und (re-)produzieren. Doch im Zuge des „Entrepreneurial Journalism" entstehen heute vielerorts neue Organisationen. Diese journalistischen Neugr{\"u}ndungen zeichnen sich unter anderem durch kleinere, offenere und flexiblere Organisationsstrukturen aus. Ihr ver{\"a}nderter organisationaler Charakter wurde jedoch bislang noch nicht tiefergehend im Hinblick auf seine Potenziale und m{\"o}glichen Risiken f{\"u}r Diversit{\"a}t und (Anti-)Diskriminierung untersucht. Der Beitrag hat somit zum Ziel, journalistische Neugr{\"u}ndungen als neuen Gegenstand auf der Agenda der organisations-und diskriminierungsbezogenen Journalismusforschung zu positionieren. Dazu werden ausgew{\"a}hlte Studien zum „Entrepreneurial Journalism" im Hinblick auf Diversit{\"a}t und (Anti-)Diskriminierung aufgearbeitet und bestehende Desiderata identifiziert. Auf dieser Grundlage wird schließlich eine programmatische Forschungsagenda entwickelt, um empirische Folgeforschung zum Thema anzustoßen.}, subject = {Journalismus}, language = {de} } @phdthesis{Velte, author = {Velte, Jens Walter}, title = {Der Schl{\"u}ssel als Objekt im Wandel der Zeit}, doi = {10.25643/bauhaus-universitaet.6479}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231020-64798}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {323}, abstract = {In der Welt der Objekte z{\"a}hlt der Schl{\"u}ssel zu den wichtigsten und {\"a}ltesten Gebrauchs-gegenst{\"a}nden der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeing{\"u}ltigen Produkts der heutigen Dingwelt in den Fokus gestellt. Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schl{\"u}ssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien. Auf der Grundlage von strukturierten Daten sollen Maßnahmen f{\"u}r eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verst{\"a}ndnis f{\"u}r den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu k{\"o}nnen. Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verst{\"a}ndnis der historischen Untersuchungen, den Erkenntnissen der durchgef{\"u}hrten Studien und einem praxisorientierten Entstehungs-prozess k{\"u}nftige Ideen und Ans{\"a}tze, eine fortw{\"a}hrende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte f{\"o}rderlich zu betrachten und einsetzen zu k{\"o}nnen.}, subject = {Schl{\"u}ssel}, language = {de} } @phdthesis{Motalebi, author = {Motalebi, Mahgol}, title = {Immigrant's Home in the Making through Spatial Practice; The Case of Iranians in Berlin}, doi = {10.25643/bauhaus-universitaet.6426}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230925-64266}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {Due to the significant number of immigrants in Europe, especially Germany, integration is an ongoing subject of debate. Since the 1970s, with the emergence of the discussions on 'place,' it has also been realized that the immigrant experience is associated with location. Nevertheless, due to the challenges in capturing the place and migration relevance, there is a gap in understanding the role of the migrant's geography of experiences and its outcomes (Phillips \& Robinson, 2015). This research aims to investigate the extent to which both the process of objective integration and the socio-spatial practices of high-skilled Iranian immigrants in Berlin outline and influence their sense of belonging to Berlin as the new "home." The embedded mixed-method design had employed for this study. The quantitative analysis through Pearson's correlation technique measured the strength of the association between Iranians' settlement distribution and the characteristics of Berlins' districts. The quantitative analysis provides contextual data to get a greater level of understanding of the case study's interaction with place. The units of place intend to demonstrate the case study's presence and possible interaction with places around their settlement location that relatively shapes their perception. The qualitative analysis comprises ethnographic fieldwork and semi-structured in-depth interviews with a homogeneous sample of Iranian immigrants in Berlin that provide data on individual and ethnic behaviors and trajectories and analyze the complex interactions between the immigrant's experience and the role of place. This research uncovers that Iranian highly skilled immigrants are successful in integrating objectively; However, in regards to their state of belonging, it illustrated the following: The role of socio-ethnic culture of the case study in denotation of home and belonging; Iranian high-skilled immigrants' efforts towards reaching a level of upward mobility overshadow their attempt to shape social and spatial interaction with Berliners and Berlin itself, which manifests both in their perception and use of urban space; and finally, the identification practice and the boundary-making as an act of reassurance and self-protection against the generalization of adjacent nationalities, demonstrated in the intersection of demographical settlement distribution of Iranians in Berlin and the ethnic diversity, impact the sense of belonging and place-making.}, subject = {Migration}, language = {en} } @phdthesis{Schwalbe, author = {Schwalbe, Friederike Simone}, title = {Die Genese der Th{\"u}ringer Kunstvereinslandschaft im ausgehenden 19. und fr{\"u}hen 20. Jahrhundert}, doi = {10.25643/bauhaus-universitaet.6487}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231121-64870}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {596}, abstract = {Zu Beginn des 19. Jahrhunderts existierten in Deutschland noch keine {\"o}ffentlichen Museen, welche sich der Pr{\"a}sentation von Kunst widmeten und dem zeitgen{\"o}ssischen Kunstschaffen einen Raum bieten konnten. In den Genuss von Malerei und bildender Kunst kamen damit lediglich jene gesellschaftlichen St{\"a}nde, denen durch Macht, Prestige und Adelszugeh{\"o}rigkeit dieses Privileg zu Teil wurde. Als neue Form des Erwachens der Bourgeoisie entwickelt, repr{\"a}sentierten die sich im Entstehen befindlichen Kunstvereine erstmalig eine wirkungsvolle, dem Adel den Vormachtanspruch auf Kunst und Kultur entreißende Instanz, welche die M{\"o}glichkeit der {\"o}ffentlichen Kunstvermittlung und Pr{\"a}sentation boten. Zwischen 1860 und 1945 entstand auf dem Gebiet des heutigen Landes Th{\"u}ringen eine Unzahl an Kunstvereinen, K{\"u}nstlerb{\"u}nden und Kunstgesellschaften, welche die Gegenwartskunst und ihre lokalen K{\"u}nstler f{\"o}rderten. Nach dem Ende des Zweiten Weltkrieges verschwanden diese F{\"o}rderer jedoch g{\"a}nzlich von der Bildfl{\"a}che und ihr Wirken geriet in Vergessenheit. Bisher fand die Vergangenheit dieser Kunstvereine und -b{\"u}nde nur wenig Aufmerksamkeit in der Kunstgeschichtsbetrachtung. Daher versucht die vorliegende Dissertation die Konstitutionen, Strukturen, die Wirksamkeit und den Einsatz f{\"u}r die (moderne) Kunst von 15 Kunstvereinen, -gesellschaften und K{\"u}nstlervereinen nachzuzeichnen und damit l{\"a}ngst {\"u}berf{\"a}llige Erkenntnisse der Beitragsleistung zur Kulturt{\"a}tigkeit der Institutionen zu erbringen. Das {\"U}berblickswerk leistet einen ersten Vorstoß in die noch weithin unbekannten Kunstvereinsgefilde in Th{\"u}ringen, vor allem auch im Kontext des nationalen Gef{\"u}ges. Die historische Betrachtung, die Darstellung der Ausstellungspraxis und die finanziellen Handlungsrahmen sollen als direkte Vergleichsans{\"a}tze die prim{\"a}re Gegen{\"u}berstellung erleichtern.}, subject = {Kunstgeschichte}, language = {de} } @periodical{AinioBartetzkyGyőrffyetal., author = {Ainio, Anna and Bartetzky, Arnold and Győrffy, Rachel and Islam, Naslima and Khvadagiani, Irakli and Kibel, Jochen and Landau-Donnelly, Friederike and Leko, Kristina and Lenz, Patricia and Onuoha, Nnenna and Rathjen, Lukas and Reinsch, Natalie and Rykov, Anatol and Tajeri, Niloufar and Ullmanov{\´a}, Kl{\´a}ra}, title = {Censored? Conflicted Concepts of Cultural Heritage}, editor = {Din{\c{c}}{\c{c}}ağ Kahveci, Ay{\c{s}}eg{\"u}l and Hajdu, Marcell and H{\"o}hne, Wolfram and Jesse, Darja and Karpf, Michael and Torres Ruiz, Marta}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-304-7}, doi = {10.25643/bauhaus-universitaet.4927}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230213-49276}, pages = {181}, abstract = {Those who ask how social entities relate to the past, enter a field defined by competing interpretations and contested practices of a collectively shared heritage. Dissent and conflict among heritage communities represent productive moments in the negotiation of these varying constructs of the past, identities, and heritage. At the same time, they lead to omissions, the overwriting and amendment of existing constructs. A closer look at all that is suppressed, excluded or rejected opens up new perspectives: It reveals how social groups are formed through public disputes upon the material foundations of heritage constructs. Taking the concept of censorship, the volume engages with the exclusionary and inclusionary mechanisms that underlie the construction of heritage and thus social identities. Censorship is understood here as a discursive strategy in public debates. In current debates, allegations of censorship surface primarily in cases where the handling of a certain heritage constructs is subjected to critical evaluation, or on the contrary, needs to be protected from criticism or even destruction. The authors trace the connection between heritage and identity and show that identity constructs are not only manifested within heritage but are actively negotiated through it.}, subject = {Kulturerbe}, language = {en} } @phdthesis{Wuendsch, author = {W{\"u}ndsch, Charlene}, title = {Entrepreneurial Branding: Eine praxistheoretische Analyse markenbildender Strategiepraktiken bei Startups}, doi = {10.25643/bauhaus-universitaet.6468}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231016-64680}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {229}, abstract = {Gr{\"u}ndungsunternehmen stehen vor der Herausforderung, eine unternehmerische Leistung zu entwickeln und gleichzeitig eine Markenidentit{\"a}t aufzubauen. Dabei sind sie mit finanziellen, personellen und strukturellen Besonderheiten konfrontiert, aber auch mit Unbekanntheit und Kundenunsicherheit. Die Dissertation zielt darauf ab, durch die Analyse markenbildender Strategiepraktiken einen Beitrag zur wissenschaftlichen Auseinandersetzung mit der Markenbildung bei Gr{\"u}ndungsunternehmen zu leisten und praktische Implikationen f{\"u}r angehende Gr{\"u}nder:innen sowie akademische Startup-Inkubatoren abzuleiten. Der Fokus liegt dabei auf Gr{\"u}ndungsvorhaben und Startups in der Vorgr{\"u}ndungs- oder fr{\"u}hen Gr{\"u}ndungsphase aus dem Hochschulumfeld. Zur Analyse markenbildender Strategiepraktiken wird der Strategy-as-Practice Ansatz (SAP) angewendet. Die qualitative Forschungsmethodik wird genutzt, um Handlungsmuster bestimmter Akteursgruppen in diesem spezifischen Kontext zu rekonstruieren. Beobachtungen, Interviews und Dokumente im Feld dienen als Grundlage f{\"u}r die Forschung. Die Ergebnisse dieser Arbeit liefern umfassende Einblicke in die markenbildende Praxis bei Gr{\"u}ndungsunternehmen. Auf Basis dieser Erkenntnisse wurde ein Modell entwickelt, das Komponenten beschreibt, die zusammen einen Handlungsrahmen f{\"u}r die Markenbildung in emergenten Strategiekontexten wie der Unternehmensgr{\"u}ndung bilden. Dieses Modell bietet die M{\"o}glichkeit, sich vor dem Hintergrund der gr{\"u}ndungsspezifischen Rahmenbedingungen mit der Markenentwicklung in der fr{\"u}hen Gr{\"u}ndungsphase auseinanderzusetzen und sie systematisch in das Gr{\"u}ndungsvorhaben zu implementieren.}, subject = {Entrepreneurship}, language = {de} } @book{Siegler, author = {Siegler, Martin}, title = {SOS: Medien des {\"U}berlebens. Die existenzielle Bedeutung von Lebenszeichen in Notf{\"a}llen}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-107534-1}, doi = {10.1515/9783111075341}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231026-64816}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {348}, abstract = {SOS-Signale auf hoher See, Klopfzeichen in Tr{\"u}mmerfeldern, Flaschenposten am Strand: Wenn Menschen in Not geraten, m{\"u}ssen sie mit allen Mitteln auf sich aufmerksam machen. Sie m{\"u}ssen Lebenszeichen senden, um am Leben zu bleiben. Dieses Buch erforscht das Ph{\"a}nomen des Lebenszeichens erstmals aus der Perspektive von Medienkulturwissenschaft, Zeichentheorie und Existenzphilosophie. Anhand zahlreicher Katastrophenszenarien wie Erdbeben, Lawinen und Bergwerkungl{\"u}cken zeigt die Studie, warum Menschen in Not existenziell von Medien und Kommunikationsmitteln abh{\"a}ngen: Keine Lebenszeichen ohne Signalfackeln, Peilsender, Satelliten oder Infrarotsensoren. Medien in Notf{\"a}llen sind mehr als nur Mittel zur Kommunikation, sie sind Bedingungen menschlicher Existenz. Sie entscheiden, ob und wie sich Leben in Not {\"a}ußern kann, ob Lebenszeichen Geh{\"o}r finden und ob Leben gerettet wird. Damit werfen Lebenszeichen ein neues Licht auf die elementaren Bedingungen menschlichen Lebens: Sie zeigen uns, dass Menschen in Not nur {\"u}berleben, wenn sie mit Artefakten, Netzwerken und Infrastrukturen verbunden sind, die ihre Existenz erm{\"o}glichen.}, subject = {Medien}, language = {de} } @techreport{BockelmannFroelichKulik, author = {Bockelmann, Leo and Fr{\"o}lich-Kulik, Maria}, title = {Vogtland - Industriekultur und Zukunft. Perspektiven zum Umgang mit dem industriekulturellen Erbe im Vogtland}, doi = {10.25643/bauhaus-universitaet.6414}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230815-64140}, pages = {84}, abstract = {Die Brosch{\"u}re gibt einen {\"U}berblick {\"u}ber die angewandten Zug{\"a}nge und erarbeiteten Ergebnisse aus dem interdisziplin{\"a}ren Forschungsprojekt „Zukunftsindex Heimat und Baukultur 2025" der Professuren Denkmalpflege und Baugeschichte, Landschaftsarchitektur /-planung sowie Sozialwissenschaftliche Stadtforschung, durchgef{\"u}hrt 2021-2023 am Institut f{\"u}r Europ{\"a}ische Urbanistik (IfEU) der Bauhaus Universit{\"a}t Weimar.}, subject = {Industriekultur}, language = {de} } @article{BapirAbrahamczykWichtmannetal., author = {Bapir, Baban and Abrahamczyk, Lars and Wichtmann, Torsten and Prada-Sarmiento, Luis Felipe}, title = {Soil-structure interaction: A state-of-the-art review of modeling techniques and studies on seismic response of building structures}, series = {Frontiers in Built Environment}, volume = {2023}, journal = {Frontiers in Built Environment}, number = {Volume 9}, editor = {Ozturk, Baki}, publisher = {Frontiers Media}, address = {Lausanne}, doi = {10.3389/fbuil.2023.1120351}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230206-49190}, pages = {1 -- 17}, abstract = {The present article aims to provide an overview of the consequences of dynamic soil-structure interaction (SSI) on building structures and the available modelling techniques to resolve SSI problems. The role of SSI has been traditionally considered beneficial to the response of structures. However, contemporary studies and evidence from past earthquakes showed detrimental effects of SSI in certain conditions. An overview of the related investigations and findings is presented and discussed in this article. Additionally, the main approaches to evaluate seismic soil-structure interaction problems with the commonly used modelling techniques and computational methods are highlighted. The strength, limitations, and application cases of each model are also discussed and compared. Moreover, the role of SSI in various design codes and global guidelines is summarized. Finally, the advancements and recent findings on the SSI effects on the seismic response of buildings with different structural systems and foundation types are presented. In addition, with the aim of helping new researchers to improve previous findings, the research gaps and future research tendencies in the SSI field are pointed out.}, subject = {Boden-Bauwerk-Wechselwirkung}, language = {en} } @phdthesis{Remus, author = {Remus, Ricardo}, title = {Ultraschallgest{\"u}tzte Betonherstellung. Konzept f{\"u}r eine ressourcenschonende Betonproduktion}, doi = {10.25643/bauhaus-universitaet.4891}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230112-48919}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {147}, abstract = {Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und {\"O}kologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang. Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte f{\"u}hrt verst{\"a}rkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und gepr{\"u}ft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte gepr{\"u}ft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt. Aufgrund der hohen Anforderungen an Konstruktion, Qualit{\"a}t und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegen{\"u}ber Ortbeton. Die hohe Oberfl{\"a}chenqualit{\"a}t und Dauerhaftigkeit aber auch die Gleichm{\"a}ßigkeit und witterungsunabh{\"a}ngige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erw{\"a}hnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen m{\"o}glich wird. Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Fr{\"u}hfestigkeitsentwicklung. Hohe Fr{\"u}hfestigkeiten sind Voraussetzung f{\"u}r einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb erm{\"o}glicht. Oft werden zur Sicherstellung hoher Fr{\"u}hfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer W{\"a}rmebehandlung eingesetzt. Unter dieser Pr{\"a}misse ist eine {\"o}kologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht m{\"o}glich. In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingef{\"u}hrt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Dar{\"u}ber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen. In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zun{\"a}chst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitf{\"a}higkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfl{\"a}che sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am st{\"a}rksten beeinflusst wird. In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verd{\"u}nnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der L{\"o}sung abh{\"a}ngt. Je niedriger die Portlanditkonzentration, desto gr{\"o}ßer ist die Beschleunigung. Erg{\"a}nzende Untersuchungen der Ionenkonzentration der L{\"o}sung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am st{\"a}rksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verd{\"u}nnten Suspensionen best{\"a}tigen und infolge der Beschallung ein fr{\"u}heres Auftreten und einen gr{\"o}ßeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim w{\"a}hrend der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel fr{\"u}her auftreten, sondern kleiner sind und fein verteilt {\"u}ber die Oberfl{\"a}che des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft f{\"u}r den sich anschließenden regul{\"a}ren Strukturaufbau angesehen. Im n{\"a}chsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine {\"A}nderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine {\"A}nderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erh{\"a}rtungsverhalten auswirken. Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchspl{\"a}nen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erh{\"a}rtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt. Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag ver{\"a}ndert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erh{\"o}ht werden. Bei {\"U}berschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abh{\"a}ngig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden. Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, k{\"o}nnen die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abh{\"a}ngigkeit des Energieeintrages die fließmittelbedingte Verz{\"o}gerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist. Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verk{\"u}rzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann. Im n{\"a}chsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinsk{\"o}rnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung gr{\"o}ßerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Dar{\"u}ber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgef{\"u}hrt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet. Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Fr{\"u}hdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich fr{\"u}her erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines {\"U}berdruckes in der Beschallkammer oder einer K{\"u}hlung der Suspension w{\"a}hrend der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Fr{\"u}hdruckfestigkeiten der ungek{\"u}hlten beziehungsweise drucklosen Variante nicht mehr erreicht. In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-st{\"u}ndige W{\"a}rmebehandlung vollst{\"a}ndig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kiesels{\"a}ure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden. In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung st{\"a}rker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 f{\"u}r weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit h{\"o}herem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden k{\"o}nnen. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließf{\"a}higkeit bei h{\"o}heren w/z-Werten beschrieben wird. F{\"u}r diese Betonrezeptur wird ein Vergleich mit einem kommerziell erh{\"a}ltlichen Erh{\"a}rtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien f{\"u}hrt zu einer weiteren deutlichen Steigerung der Fr{\"u}hfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann. In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universit{\"a}ren Ausgr{\"u}ndung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den {\"U}berlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilit{\"a}t gelegt und gezeigt, dass das ultraschallgest{\"u}tze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung f{\"u}r eine {\"o}kologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden.}, subject = {Beton}, language = {de} } @phdthesis{Walther, author = {Walther, Tino}, title = {Ein Modell zur Optimierung der Bauleistungsfeststellung von Linienbaustellen}, publisher = {Eigenverlag der Professur Baubetrieb und Bauverfahren}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4911}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230210-49115}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {168}, abstract = {Das Wissen um den realen Zustand eines Bauprojektes stellt eine entscheidende Kernkompetenz eines steuernden bauausf{\"u}hrenden Unternehmens dar. Der bewusste Umgang mit Informationen und deren effiziente Nutzung sind entscheidende Erfolgsfaktoren f{\"u}r die zeit-, kosten- und qualit{\"a}tsgerechte Realisierung von Bauprojekten. Obwohl die erforderlichen Erfolgsfaktoren bekannt sind, sind Kosten- und Termin{\"u}berschreitungen von Bauprojekten keine Seltenheit - eher das Gegenteil ist der Fall. Zukunftsweisende Digitalisierungsprojekte aber geben Anlass zu Hoffnung. Ein Beispiel ist der bereits im Dezember 2015 vom Bundesministerium f{\"u}r Verkehr und digitale Infrastruktur ins Leben gerufene Stufenplan Digitales Planen und Bauen. Dieser hat die Aufgabe fl{\"a}chendeckend die Methodik des Building Information Modeling (BIM) im Infrastrukturbereich einzuf{\"u}hren und somit die Digitalisierung in Deutschland zukunftsweisend voranzutreiben, indem erfolgreiche Bauprojekte mit durchg{\"a}ngigen Informationsfl{\"u}ssen arbeiten. Seither existiert eine Vielzahl an Digitalisierungsprojekten, alle mit gleichen Zielen. Nachweislich lassen sich hinsichtlich dessen allerdings auch vermehrt Defizite aufzeigen. So ist der Fortschritt sehr heterogen verteilt und l{\"a}sst sich f{\"u}r die Branche nicht allgemeing{\"u}ltig festlegen. Mit einer internationalen Literaturrecherche sowie einer empirischen Studie als Untersuchungsmethode wurde in Form von Interviews mit Fachkundigen der tats{\"a}chliche Zustand der Digitalisierungs- und der BIM-Anwendungen im Straßenbau f{\"u}r den Controllingprozess der Bauleistungsfeststellung untersucht. Die erhobenen Daten wurden aufbereitet und anschließend softwaregest{\"u}tzt einer inhaltlichen Analyse unterzogen. In Kombination mit den Ergebnissen der Literaturrecherche wurden notwendige Anforderungen f{\"u}r den Controllingprozess der Bauleistungsfeststellung erhoben. Auf dieser Grundlage wurde ein Modell im Sinne der Systemtheorie zur Optimierung der Bauleistungsfeststellung entwickelt. Gegenstand der vorliegenden Arbeit ist die Integration der modellbasierten Arbeitsweise in die Prozesse der Bauleistungsfeststellung eines Bauunternehmens. Grundlage ist die objektive Auswertung des Fertigstellungsgrades (Baufortschrittes) mittels Luftbildaufnahmen. Deren Auswertung auf Basis eines Algorithmus und die systematische Identifikation des Baufortschrittes integriert in den Prozess der Bauleistungsfeststellung werden zu einem neu entwickelten Gesamtsystem mit dem Ergebnis eines optimierten Modells. Das entwickelte Modell wurde hinsichtlich Anwendbarkeit und praktischer Relevanz an ausgew{\"a}hlten Beispielszenarien untersucht und nachgewiesen.}, subject = {Building Information Modeling}, language = {de} } @phdthesis{Neupert, author = {Neupert, Max}, title = {Audiovisuelles Cut-Up}, doi = {10.25643/bauhaus-universitaet.4896}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230123-48968}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {129}, abstract = {This research identifies and examines the aesthetic phenomenon of extremely fast cut audiovisual media works. The term 'audiovisual cut-up' is proposed. The literary form of cut-up is described and compared to the characteristics of the reviewed phenomenon. A wide range of audiovisual works across different contexts is analyzed; all of which are sharing the same formal criteria of extremely short edits, including the authors contributions to the field. The technological tools facilitating the novel aesthetic are often crafted by the artists themselves because ready made solutions did not preexist. Audiovisual cut-ups are classified according to their contexts and mediums. Some observations are made regarding how audio and video essentially differ in their character, what the smallest perceivable unit is, and which role latencies and anticipation play in the perception of audiovisual media. Three main theses are made: 1. Audiovisual cut-up has the power to amplify small, previously hidden details and may be used to distort and deride the source material. 2. Technological advances have led to the development of audiovisual cut-up. 3. The aesthetic possibilities of cut-ups have become an integral part in the spectrum of possible audio-visual techniques.}, subject = {Medienkunst}, language = {de} } @misc{Sidjimovska, author = {Sidjimovska, Ivana}, title = {Out of the Periphery. Museum of Solidarity}, doi = {10.25643/bauhaus-universitaet.4902}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230228-49021}, pages = {13 -- 98}, abstract = {The artistic research work is concerned with webs of transnational artistic solidarity, especially those ingrained in the Nonaligned Movement (NAM), which embraced differences and united them in a common anti-imperialist and anti-colonial fight. Taking the museum as an artefact of historically situated solidarity, the project examines the instruments of transnational art solidarity for conceiving, developing and implementing decolonial cultural practices today. The main research question regards thinking about whether and how the emancipatory potential of the transnational art solidarity can be extracted, recuperated and translated when dealing with present issues of cultural decolonisation. Three museums founded on the bases of international solidarity and donations of artworks form the case study. Consequently, the research findings are systematised in three discourses: The Autonomous Museum; The Decolonial Museum; and The Museum in Exile.}, subject = {Kunst}, language = {en} } @article{WellbrockLobigsErbrichetal., author = {Wellbrock, Christian-Mathias and Lobigs, Frank and Erbrich, Lukas and Buschow, Christopher}, title = {Coopetition is King. {\"O}konomische Potentiale und medienpolitische Implikationen kooperativer Journalismusplattformen}, volume = {2023}, publisher = {Landesanstalt f{\"u}r Medien NRW}, address = {D{\"u}sseldorf}, doi = {10.25643/bauhaus-universitaet.4947}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230320-49473}, pages = {1 -- 48}, abstract = {Die vorliegende Studie geht der Fragestellung nach, wie sich eine anbieter{\"u}bergreifende, abonnementbasierte Plattform f{\"u}r den digitalen Journalismus, also eine Art Spotify im Journalismus, auf die Ums{\"a}tze der Anbieter journalistischer Inhalte und die Abonnements im Digitaljournalismus in Deutschland auswirken w{\"u}rde. Auf Basis drei sich erg{\"a}nzender Sch{\"a}tzmethoden f{\"u}r Zahlungsbereitschaft, die in zwei Repr{\"a}sentativbefragungen der deutschen Online-Bev{\"o}lkerung mit insgesamt 8.000 Teilnehmenden angewandt wurden, gelangt das Whitepaper zu den folgenden Schl{\"u}sselbefunden.}, subject = {Journalistik}, language = {de} } @article{LondongBarthSoebke, author = {Londong, J{\"o}rg and Barth, Marcus and S{\"o}bke, Heinrich}, title = {Reducing antimicrobial resistances by source separation of domestic wastewater}, series = {Frontiers in Environmental Health}, volume = {2023}, journal = {Frontiers in Environmental Health}, number = {Volume 2, article 1151898}, publisher = {Frontiers Media}, address = {Lausanne}, doi = {10.3389/fenvh.2023.1151898}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230403-49483}, pages = {1 -- 5}, abstract = {Antimicrobial resistances (AMR) are ranked among the top ten threats to public health and societal development worldwide. Toilet wastewater contained in domestic wastewater is a significant source of AMR entering the aquatic environment. The current commonly implemented combined sewer systems at times cause overflows during rain events, resulting in the discharge of untreated wastewater into the aquatic environment, thus promoting AMR. In this short research article, we describe an approach to transform combined sewer systems into source separation-modified combined sewer systems that separately treat toilet wastewater. We employ simulations for demonstrating that source separation-modified combined sewer systems reduce the emission of AMR- causing substances by up to 11.5 logarithm levels. Thus, source separation- modified combined sewer systems are amongst the most effective means of combating AMR. KEYWORDS}, subject = {Allgemeinheit}, language = {en} } @phdthesis{Dief, author = {Dief, Shaima}, title = {Ancient Egyptian Hybrid Deities in Visual Form as Mediator in Cultural Transmission}, doi = {10.25643/bauhaus-universitaet.4933}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230220-49337}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {170}, abstract = {The most fundamental understating of hybridization methodology takes the form of stable but dynamic notions, accumulated over time in the memory of individuals. Schematized and abstracted, the hybrids representation needs to be reproduced and reused in order to reconstruct and bring back other memories. Reinvented, or reused hybrids can support getting access to social, traditional, religious understanding of nations. In this manner, they take the form of the messenger / the mediator an innate, equivalent to the use of mental places in the art of memory. We remember mythology in order to remember other things. From individual memory perspective, or group collective memory, the act of recollection is assumed to be an individual act, biologically based in the brain, but by definition conditioned by social collectives. Following Halbwachs, this thesis does not recognize a dichotomy between individual and collective memory as two different types of remembering. Conversely, the collective is thought of as inherent to individual thought, questioning perspectives that regard individual recollection as isolated from social settings. The individual places himself in relation to the group and makes use of the collective frameworks of thought when he localizes and reconstructs the past, whether in private or in social settings. The frameworks of social relations, of time, and of space are constructs originating in social interaction and distributed in the memory of the group members. The individual has his own perspective on the collective frameworks of the group, and the group's collective frameworks can be regarded as a common denominator of the individual outlooks on the framework. In acts of remembering, the individual may actualize the depicted symbols in memory, but he could also employ precepts from the environment. The latter have been referred to as material or external frameworks of memory, suggesting their similar role as catalysts for processes of remembrance such as that of the hybrids in my paintings. It is only with reference to the hybrids, who work as messengers / mediators with a dual nature, that communicate between the past and the present, the internal and external space, that individual memory and group memory is in focus. The exhibition at the Egyptian museum in Leipzig is my practical method to create a communicative memory, using hybrids as mediators in cultural transimission, as when the act refers to informal and everyday situations in which group members informally search for the past, it takes place in the communicative 162 memory. As explained in chapter one, the exhibition at the Egyptian museum in Leipzig is an act of remembering in search for the past with support of my paintings, which then can considered as part of the cultural memory. In addition to the theoretical framework summarized above, I have applied my hypothesis practically in the form of the public exhibition, and shared the methodology with public audience from Cairo / Egypt and Leipzig / German in the form of visual art workshops and open discussions. I have also suggested an analyzed description of the meaning of hybrids in my artwork as mediators and messengers for the purpose of cultural transmission, as well as in relation to other artists' work and use of a similar concept. By using my hybrid creatures in my visual artwork, I am creating a bridge, mediators to represent both the past and the present, what we remember of the past, and how we understand the past. It is as explained in chapter two; that the hybridization methodology in terms of double membership represented in different cultures -Cairo / Egypt and Leipzig / Germany- can provide a framework which allows artistic discussions and could be individually interpreted, so individual cultures / individual memory can become transparent without losing their identities and turn into communicative memory. This transmission through the hybridization theoretical approech was explicitly clarified with the support of Kr{\"a}mer's hypothesis. The practical attempt was examined by creating a relationship between the witness -me as an artist- and the audience -the exhibition visitors-, to cross space and time, not to bridge differences, rather to represent the contrasts transparently. The Kin-making proposition is adopted by many academics and scholars in modern society and theoretical research; the topic was represented in the roots of the ancient Egyptian mindset and supported theoretically by similar understandings such as Haraway's definition of kin-making. The practical implementation of kin- making can be observed in many of my artwork and was analyzed visually and artistically in chapter three. My practical project outcome tested success by using hybrids in my paintings as mediators, it opened a communicative artistic discussion. This methodology gave a possible path of communication through paintings / visual analyses, and offered relativity through image self-interpretation.}, subject = {Kollektives Ged{\"a}chtnis}, language = {en} } @phdthesis{Wills, author = {Wills, Nadine}, title = {Modell bedarfsorientierter Leistungserbringung im FM auf Grundlage von Sensortechnologien und BIM}, publisher = {Eigenverlag der Professur Baubetrieb und Bauverfahren}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4924}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230214-49248}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {171}, abstract = {W{\"a}hrend der Digitalisierung im Bauwesen insbesondere im Bereich der Planungs- und Errichtungsphase von Bauwerken immer gr{\"o}ßere Aufmerksamkeit zuteilwird, ist das digitale Potenzial im Facility Management weit weniger ausgesch{\"o}pft, als dies m{\"o}glich w{\"a}re. Vor dem Hintergrund, dass die Bewirtschaftung von Geb{\"a}uden jedoch einen wesentlichen Kostenanteil im Lebenszyklus darstellt, ist eine Fokussierung auf digitale Prozesse im Geb{\"a}udebetrieb erforderlich. Im Facility Management werden Dienstleistungen h{\"a}ufig verrichtungsorientiert, d. h. nach statischen Intervallen, oder bedarfsorientiert erbracht. Beide Arten der Leistungserbringung weisen Defizite auf, beispielweise weil T{\"a}tigkeiten auf Basis definierter Intervalle erbracht werden, ohne dass eine Notwendigkeit besteht oder weil bestehende Bedarfe mangels M{\"o}glichkeiten der Bedarfsermittlung nicht identifiziert werden. Speziell die Definition und Ermittlung eines Bedarfs zur Leistungserbringung ist h{\"a}ufig subjektiv gepr{\"a}gt. Auch sind Dienstleister oft nicht in fr{\"u}hen Phasen der Geb{\"a}udeplanung involviert und erhalten f{\"u}r ihre Dienstleistungen notwendige Daten und Informationen erst kurz vor Inbetriebnahme des zu betreibenden Geb{\"a}udes. Aktuelle Ans{\"a}tze des Building Information Modeling (BIM) und die zunehmende Verf{\"u}gbarkeit von Sensortechnologien in Geb{\"a}uden bieten Chancen, die o. g. Defizite zu beheben. In der vorliegenden Arbeit werden deshalb Datenmodelle und Methoden entwickelt, die mithilfe von BIM-basierten Datenbankstrukturen sowie Auswertungs- und Entscheidungsmethodiken Dienstleistungen der Geb{\"a}udebewirtschaftung objektiviert und automatisiert ausl{\"o}sen k{\"o}nnen. Der Fokus der Arbeit liegt dabei auf dem Facility Service der Reinigungs- und Pflegedienste des infrastrukturellen Facility Managements. Eine umfangreiche Recherche etablierter Normen und Standards sowie {\"o}ffentlich zug{\"a}nglicher Leistungsausschreibungen bilden die Grundlage der Definition erforderlicher Informationen zur Leistungserbringung. Die identifizierten statischen Geb{\"a}ude- und Prozessinformationen werden in einem relationalen Datenbankmodell strukturiert, das nach einer Darstellung von Messgr{\"o}ßen und der Beschreibung des Vorgehens zur Auswahl geeigneter Sensoren f{\"u}r die Erfassung von Bedarfen, um Sensorinformationen erweitert wird. Um Messwerte verschiedener und bereits in Geb{\"a}uden existenten Sensoren f{\"u}r die Leistungsausl{\"o}sung verwenden zu k{\"o}nnen, erfolgt die Implementierung einer Normierungsmethodik in das Datenbankmodell. Auf diese Weise kann der Bedarf zur Leistungserbringung ausgehend von Grenzwerten ermitteln werden. Auch sind Verkn{\"u}pfungsmethoden zur Kombination verschiedener Anwendungen in dem Datenbankmodell integriert. Zus{\"a}tzlich zur direkten Ausl{\"o}sung erforderlicher Aktivit{\"a}ten erm{\"o}glicht das entwickelte Modell eine opportune Ausl{\"o}sung von Leistungen, d. h. eine Leistungserbringung vor dem eigentlich bestehenden Bedarf. Auf diese Weise k{\"o}nnen t{\"a}tigkeits{\"a}hnliche oder r{\"a}umlich nah beieinander liegende T{\"a}tigkeiten sinnvoll vorzeitig erbracht werden, um f{\"u}r den Dienstleister eine Wegstreckeneinsparung zu erm{\"o}glichen. Die Arbeit beschreibt zudem die f{\"u}r die Auswertung, Entscheidungsfindung und Auftrags{\"u}berwachung ben{\"o}tigen Algorithmen. Die Validierung des entwickelten Modells bedarfsorientierter Leistungserbringung erfolgt in einer relationalen Datenbank und zeigt simulativ f{\"u}r unterschiedliche Szenarien des Geb{\"a}udebetriebs, dass Bedarfsermittlungen auf Grundlage von Sensortechnologien erfolgen und Leistungen opportun ausgel{\"o}st, beauftragt und dokumentiert werden k{\"o}nnen.}, subject = {Facility-Management}, language = {de} } @phdthesis{Jaouadi, author = {Jaouadi, Zouhour}, title = {Pareto and Reliability-Oriented Aeroelastic Shape Optimization of Bridge Decks}, doi = {10.25643/bauhaus-universitaet.4935}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230303-49352}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {167}, abstract = {Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies.}, subject = {Gestaltoptimierung}, language = {en} } @phdthesis{Weise, author = {Weise, Franziska}, title = {Erfolgskritische Faktoren in exemplarischen Building Information Modeling Anwendungsf{\"a}llen: Eine Analyse unter der Beachtung schleppender Digitalisierung und organisationaler Ver{\"a}nderungen}, publisher = {Eigenverlag der Professur Baubetrieb und Bauverfahren}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4928}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230302-49281}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Die fortschreitende Digitalisierung l{\"a}sst innovative bauprojekt- und unternehmensinterne Workflows sowie Organisationssysteme entstehen. In diesem Zusammenhang ist die digitale Fortentwicklung durch Building Information Modeling [BIM] als Ver{\"a}nderungsprozess zu definieren, der Organisationsstrukturen nachhaltig umformen wird. BIM ist die f{\"u}hrende digitale Arbeitsmethodik im Bauwesen, die entwurfs-, ausf{\"u}hrungs- und bauprojektbezogenen Belangen gerecht werden kann. Die deutsche Bauwirtschaft ist im Vergleich zu anderen Branchen jedoch als digital r{\"u}ckst{\"a}ndig zu betrachten. Sie ist durch einen Markt gekennzeichnet, an dem kleine und mittelst{\"a}ndische Unternehmen [KMU] in hoher Zahl vertreten sind. Aufgrund von Anwendungsunkenntnis der kleinen und mittelst{\"a}ndischen Unternehmen fehlt der fl{\"a}chendeckende und durchg{\"a}ngige BIM-Einsatz in Projekten. Mit dem Fokus auf dem Bauprojekt als tempor{\"a}rer Organisation adressiert der vorliegende Forschungsschwerpunkt die Schaffung eines realistischen Abbilds erprobter BIM-Anwendungsf{\"a}lle in Modellprojekten. Herausgearbeitet werden derzeit bestehende BIM-Herausforderungen f{\"u}r Erstanwender, die die durchg{\"a}ngige BIM-Anwendung in Deutschland bisher hemmen. Die Forschungsarbeit fokussiert sich auf die Evaluation erfolgskritischer Faktoren [ekF] in BIM-Anwendungsf{\"a}llen [AWF] im Rahmen einer qualitativen Inhaltsanalyse. Die digitale Transformation birgt strukturrelevante Ver{\"a}nderungsdeterminanten f{\"u}r Organisationen durch die BIM-Anwendung und außerdem Herausforderungen, die in der Anwendungsfallforschung betrachtet werden. Die Zielstellung ist dreiteilig. Ein entwickeltes BIM-Strukturmodell erfasst die aktuelle Richtlinienarbeit sowie Standardisierung und stellt dadurch den Rahmen notwendiger BIM-Strukturen im Bauprojekt auf. Aus dem Strukturmodell ist ein Modell zur Pr{\"u}fung von Anwendungsfallrisiken abgeleitet worden. Dieses wird auf gezielt recherchierte BIM-Modellprojekte in Deutschland angewendet, um aus den erfolgskritischen Faktoren der darin praktizierten BIM-Anwendungsf{\"a}lle eine ekF-Risikomatrix abzuleiten. Daraus geht ein unterst{\"u}tzendes BIM-Anwendungsinstrument in Form von BPMN-Abl{\"a}ufen f{\"u}r KMU hervor. Resultierend aus der Verbindung des BIM-Strukturmodels und der Anwendungsfallanalyse wird in den einzelnen Ablauf{\"u}bersichten eine Risikoverortung je Anwendungsfall kenntlich gemacht. Unternehmen ohne BIM-Anwendungsexpertise in Bauprojektorganisationen erhalten auf diese Weise einen instrumentellen und niederschwelligen Zugang zu BIM, um die kollaborativen und wirtschaftlichen Vorteile der digitalen Arbeitsmethodik nutzen zu k{\"o}nnen.}, subject = {Building Information Modeling}, language = {de} } @phdthesis{Hunger, author = {Hunger, Francis}, title = {Die Form der Datenbank}, doi = {10.25643/bauhaus-universitaet.4936}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230306-49362}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {424}, abstract = {Datenbanken sind heute die wichtigste Technik zur Organisation und Verarbeitung von Daten. Wie wurden sie zu einer der allgegenw{\"a}rtigsten und gleichzeitig unsichtbarsten Praxis, die menschliche Zusammenarbeit erm{\"o}glicht? Diese Studie beginnt mit einer historiographischen Erkundung der zentralen medialen Konzepte von Datenbanken und m{\"u}ndet in das praxeologische Konzept der "Daten als Formation", kurz: In-Formation. Der erste Hauptteil befasst sich mit der Formatierung von Daten durch die Verarbeitung strukturierter Daten mittels relationaler Algebra. Es wird erarbeitet, auf welche Weise Struktur neues Wissen schafft. Im zweiten Teil wird er{\"o}rtert, wie Datenbanken durch den diagrammatisch-epistemischen Raum der Tabelle operationalisiert werden. Drittens untersucht die Studie Transaktionen als Erkl{\"a}rungen daf{\"u}r, wie Daten und reale Handlungen koordiniert und synchronisiert werden k{\"o}nnen. Im zweiten Hauptteil wird untersucht, wie relationale Datenbanken zunehmend zum Zentrum von Softwareanwendungen und Infrastrukturen wurden, wobei der Schwerpunkt auf wirtschaftlichen Praktiken liegt. In einem vergleichenden Ansatz wird anhand von Fallstudien in der DDR der 1970er bis 1990er Jahren die Frage gestellt, ob es eine „sozialistische" Datenbankmanagement-Software gegeben hat. Dabei werden die „westlichen" Produktionsdatenbanken BOMP, COPICS und MAPICS (IBM) sowie R2 (SAP) im Zusammenspiel mit den ostdeutschen Sachgebietsorientierten Programmiersystemen (SOPS) von Robotron diskutiert. Schließlich untersucht dieser Teil, wie die DDR ihr eigenes relationales Datenbankmanagementsystem, DABA 1600, entwickelte und dabei „westliche" Technologie neu interpretierte. Das abschließende Kapitel fasst die Konzepte der relationalen Datenbanken als heute wichtigsten Datenorganisationstechnik zusammen. Es er{\"o}rtert, inwiefern es m{\"o}glich ist, die historiographische Erz{\"a}hlung {\"u}ber die Entstehung von Datenbankmanagementsystemen und ihre Folgen f{\"u}r die Geschichte der Informatik zu dezentrieren. Es schließt mit der Erkenntnis, dass {\"o}stliche und westliche Medien der Kooperation sich in Form und Funktion erstaunlich {\"a}hnlich sind, beide wurzeln in den tiefen Genealogien von organisatorischen und wissensbildenden Datenpraktiken. Neben dieser medienwissenschaftlichen Arbeit besteht die Dissertation aus einem k{\"u}nstlerischen Teil, der dokumentiert wird: Anhand einer Reihe von Vlogs erkundet die fiktionale Figur „Data Proxy" aktuelle Daten{\"o}kologien.}, subject = {Medientheorie}, language = {de} } @phdthesis{Gapševičius, author = {Gapševičius, Mindaugas}, title = {Aesthetics of Maker Culture: the Active Role of the Audience}, doi = {10.25643/bauhaus-universitaet.4939}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230313-49396}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {206}, abstract = {In this work, practice-based research is conducted to rethink the understanding of aesthetics, especially in relation to current media art. Granted, we live in times when technologies merge with living organisms, but we also live in times that provide unlimited resources of knowledge and maker tools. I raise the question: In what way does the hybridization of living organisms and non-living technologies affect art audiences in the culture that may be defined as Maker culture? My hypothesis is that active participation of an audience in an artwork is inevitable for experiencing the artwork itself, while also suggesting that the impact of the umwelt changes the perception of an artwork. I emphasize artistic projects that unfold through mutual interaction among diverse peers, including humans, non-human organisms, and machines. In my thesis, I pursue collaborative scenarios that lead to the realization of artistic ideas: (1) the development of ideas by others influenced by me and (2) the materialization of my own ideas influenced by others. By developing the scenarios of collaborative work as an artistic experience, I conclude that the role of an artist in Maker culture is to mediate different types of knowledge and different positions, whereas the role of the audience is to actively engage in the artwork itself. At the same time, aesthetics as experience is triggered by the other, including living and non-living actors. It is intended that the developed methodologies could be further adapted in artistic practices, philosophy, anthropology, and environmental studies.}, subject = {Medienkunst}, language = {en} } @article{AnsariZachariasKoenke, author = {Ansari, Meisam and Zacharias, Christin and K{\"o}nke, Carsten}, title = {Metaconcrete: An Experimental Study on the Impact of the Core-Coating Inclusions on Mechanical Vibration}, series = {materials}, volume = {2023}, journal = {materials}, number = {Volume 16, Issue 5, article 1836}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma16051836}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230315-49370}, pages = {1 -- 18}, abstract = {Resonance vibration of structures is an unpleasant incident that can be conventionally avoided by using a Tuned Mass Damper (TMD). The scope of this paper contains the utilization of engineered inclusions in concrete as damping aggregates to suppress resonance vibration similar to a TMD. The inclusions are composed of a stainless-steel core with a spherical shape coated with silicone. This configuration has been the subject of several studies and it is best known as Metaconcrete. This paper presents the procedure of a free vibration test conducted with two small-scaled concrete beams. The beams exhibited a higher damping ratio after the core-coating element was secured to them. Subsequently, two meso-models of small-scaled beams were created: one representing conventional concrete and the other representing concrete with the core-coating inclusions. The frequency response curves of the models were obtained. The change in the response peak verified the ability of the inclusions to suppress the resonance vibration. This study concludes that the core-coating inclusions can be utilized in concrete as damping aggregates.}, subject = {Beton}, language = {en} } @article{SanderWeissermel, author = {Sander, Hendrik and Weißermel, S{\"o}ren}, title = {Urban Heat Transition in Berlin: Corporate Strategies, Political Conflicts, and Just Solutions}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6178}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63845}, pages = {361 -- 371}, abstract = {In the field of urban climate policy, heat production and demand are key sectors for achieving a sustainable city. Heat production has to shift from fossil to renewable energies, and the heat demand of most buildings has to be reduced significantly via building retrofits. However, analyses of heat transition still lack its contextualization within entangled urban politico-economic processes and materialities and require critical socio-theoretical examination. Asking about the embeddedness of heat transition within social relations and its implications for social justice issues, this article discusses the challenges and opportunities of heat transition, taking Berlin as an example. It uses an urban political ecology perspective to analyze the materialities of Berlin's heating-housing nexus, its politico-economic context, implications for relations of inequality and power, and its contested strategies. The empirical analysis identifies major disputes about the future trajectory of heat production and about the distribution of retrofit costs. Using our conceptual approach, we discuss these empirical findings against the idea of a more just heat transition. For this purpose, we discuss three policy proposals regarding cost distribution, urban heat planning, and remunicipalization of heat utilities. We argue that this conceptual approach provides huge benefits for debates around heat transition and, more generally, energy justice and just transitions.}, subject = {Berlin}, language = {en} } @article{Bockelmann, author = {Bockelmann, Leo}, title = {Impacts of Change: Analysing the Perception of Industrial Heritage in the Vogtland Region}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6025}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63814}, pages = {30 -- 38}, abstract = {Beyond metropolitan areas, many peripheral regions and their cities in Europe have, in manifold ways, been significantly shaped by industrialisation. In the context of the relocation of industrial production to other countries over the last decades, the question has been raised as to the role this heritage can play in futural regional development as well as the potential local identification with this history. Hence, this article seeks to analyse the perception of the industrial heritage in the Vogtland region, located alongside the border of three German federal states and the Czech Republic. It inquires as to the perception of the industrial heritage by the local population and related potential future narrations. Based on spontaneous and explorative interviews with local people as an empirical base, a discrepancy between the perception of the tangible and intangible dimensions of the industrial heritage can be observed. On the one hand, the tangible heritage like older factories and production complexes are seen as a functional legacy and an "eyesore" narrative is attributed to them. On the other hand, people often reference the personal and familial connection to the industry and highlight its importance for the historical development and the wealth of the region. But these positive associations are mainly limited to the intangible dimension and are disconnected from the material artefacts of industrial production.}, subject = {Vogtland}, language = {en} } @article{AbrahamczykUzair, author = {Abrahamczyk, Lars and Uzair, Aanis}, title = {On the use of climate models for estimating the non-stationary characteristic values of climatic actions in civil engineering practice}, series = {Frontiers in Built Environment}, volume = {2023}, journal = {Frontiers in Built Environment}, number = {volume 9, article 1108328}, publisher = {Frontier Media}, address = {Lausanne}, doi = {10.3389/fbuil.2023.1108328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63751}, pages = {1 -- 9}, abstract = {The characteristic values of climatic actions in current structural design codes are based on a specified probability of exceedance during the design working life of a structure. These values are traditionally determined from the past observation data under a stationary climate assumption. However, this assumption becomes invalid in the context of climate change, where the frequency and intensity of climatic extremes varies with respect to time. This paper presents a methodology to calculate the non-stationary characteristic values using state of the art climate model projections. The non-stationary characteristic values are calculated in compliance with the requirements of structural design codes by forming quasi-stationary windows of the entire bias-corrected climate model data. Three approaches for the calculation of non-stationary characteristic values considering the design working life of a structure are compared and their consequences on exceedance probability are discussed.}, subject = {Klima{\"a}nderung}, language = {en} } @article{GrimmeKollakidouSonderskovZarpetal., author = {Grimme, Sophie Alice and Kollakidou, Avgi and S{\o}nderskov Zarp, Christian and Hornecker, Eva and Kr{\"u}ger, Norbert and Graf, Phillip and Marchetti, Emanuela}, title = {Floor Cleaners as Helper Pets: Projecting Assistive Robots' Agency on Zoomorphic Affordances}, series = {SN Computer Science}, volume = {2023}, journal = {SN Computer Science}, number = {volume 4, article 372}, publisher = {Springer}, address = {Singapur}, doi = {10.1007/s42979-023-01769-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63796}, pages = {1 -- 14}, abstract = {Care of ageing adults has become a dominant field of application for assistive robot technologies, promising support for ageing adults residing in care homes and staff, in dealing with practical routine tasks and providing social and emotional relieve. A time consuming and human intensive necessity is the maintenance of high hygiene quality in care homes. Robotic vacuum cleaners have been proven effective for doing the job elsewhere, but—in the context of care homes—are counterproductive for residents' well-being and do not get accepted. This is because people with dementia manifest their agency in more implicit and emotional ways, while making sense of the world around them. Starting from these premises, we explored how a zoomorphic designed vacuum cleaner could better accommodate the sensemaking of people with dementia. Our design reconceptualises robotic vacuum cleaners as a cat-like robot, referring to a playful behaviour and appearance to communicate a non-threatening and familiar role model. Data from an observational study shows that residents responded positively to our prototype, as most of them engaged playfully with it as if it was a pet or a cat-like toy, for example luring it with gestures. Some residents simply ignored the robot, indicating that it was not perceived as frightening or annoying. The level of activity influenced reactions; residents ignored our prototype if busy with other occupations, which proves that it did not cause significant disturbance. We further report results from focus group sessions with formal and informal caregivers who discussed a video prototype of our robot. Caregivers encouraged us to enhance the animal like characteristics (in behaviour and materiality) even further to result in richer interactions and provoke haptic pleasure but also pointed out that residents should not mistake the robot for a real cat.}, subject = {Alter}, language = {en} } @article{DamirMeyerAziz, author = {Damir, Mirhan and Meyer, Martin and Aziz, Hellen}, title = {Patterns of Detachment: Spatial Transformations of the Phosphate Industry in el-Quseir, Egypt}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6053}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63805}, pages = {1 -- 16}, abstract = {The establishment of phosphate mines and processing plants by Italian entrepreneurs in el-Quseir in 1912 revitalized a town that had faced a steady decline after the opening of the Suez Canal and re-linked it to the world economy. To this day, the now defunct industrial site occupies a large section of physical el-Quseir and plays a key role in its identity. In this article, we explore the impact of the company's successive industrialization and deindustrialization based on archival research, interviews, and mapping. By tracing physical changes on-site and in the city of el-Quseir from the founding of its phosphate industry until today, as well as the historical and current interactions of citizens with the industrial facilities, we hope to better understand the "cluster value" of the industrial plant in quotidian life and the effect of the vacuum left behind after the termination of production. As machinery and buildings are slowly eroding in the absence of expressed interest by the former Italian and current Egyptian owners, we aim to discuss the relationship between the citizens and their el-Quseir phosphate plant as a crucial element of its heritage value at the local level.}, subject = {{\"A}gypten}, language = {en} } @article{AbdelnourZabel, author = {Abdelnour, Mena and Zabel, Volkmar}, title = {Modal identification of structures with a dynamic behaviour characterised by global and local modes at close frequencies}, series = {Acta Mechanica}, volume = {2023}, journal = {Acta Mechanica}, publisher = {Springer}, address = {Wien}, doi = {10.1007/s00707-023-03598-z}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230525-63822}, pages = {1 -- 21}, abstract = {Identification of modal parameters of a space frame structure is a complex assignment due to a large number of degrees of freedom, close natural frequencies, and different vibrating mechanisms. Research has been carried out on the modal identification of rather simple truss structures. So far, less attention has been given to complex three-dimensional truss structures. This work develops a vibration-based methodology for determining modal information of three-dimensional space truss structures. The method uses a relatively complex space truss structure for its verification. Numerical modelling of the system gives modal information about the expected vibration behaviour. The identification process involves closely spaced modes that are characterised by local and global vibration mechanisms. To distinguish between local and global vibrations of the system, modal strain energies are used as an indicator. The experimental validation, which incorporated a modal analysis employing the stochastic subspace identification method, has confirmed that considering relatively high model orders is required to identify specific mode shapes. Especially in the case of the determination of local deformation modes of space truss members, higher model orders have to be taken into account than in the modal identification of most other types of structures.}, subject = {Fachwerkbau}, language = {en} } @article{KreskowskiRendleFroehlich, author = {Kreskowski, Adrian and Rendle, Gareth and Fr{\"o}hlich, Bernd}, title = {Efficient Direct Isosurface Rasterization of Scalar Volumes}, series = {Computer Graphics Forum}, volume = {2022}, journal = {Computer Graphics Forum}, number = {Volume 4, Issue 7}, publisher = {Wiley Blackwell}, address = {Oxford}, doi = {10.1111/cgf.14670}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230525-63835}, pages = {215 -- 226}, abstract = {In this paper we propose a novel and efficient rasterization-based approach for direct rendering of isosurfaces. Our method exploits the capabilities of task and mesh shader pipelines to identify subvolumes containing potentially visible isosurface geometry, and to efficiently extract primitives which are consumed on the fly by the rasterizer. As a result, our approach requires little preprocessing and negligible additional memory. Direct isosurface rasterization is competitive in terms of rendering performance when compared with ray-marching-based approaches, and significantly outperforms them for increasing resolution in most situations. Since our approach is entirely rasterization based, it affords straightforward integration into existing rendering pipelines, while allowing the use of modern graphics hardware features, such as multi-view stereo for efficient rendering of stereoscopic image pairs for geometry-bound applications. Direct isosurface rasterization is suitable for applications where isosurface geometry is highly variable, such as interactive analysis scenarios for static and dynamic data sets that require frequent isovalue adjustment.}, subject = {Rendering}, language = {en} } @book{OPUS4-6378, title = {Corona und die Stadt. Kommunale Beteiligungskultur in der Krise?}, editor = {Brokow-Loga, Anton}, publisher = {transcript}, address = {Bielefeld}, isbn = {978-3-8394-6548-6}, doi = {10.14361/9783839465486}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63785}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {260}, abstract = {Die Corona-Krise stellt das st{\"a}dtische Zusammenleben auf eine harte Probe. Nicht nur sozialer Austausch, Kultur und Verkehr, sondern auch die kommunale Demokratie ist massiv beeinflusst. Wer kann in der Krise noch mitsprechen? Und wie ver{\"a}ndert sie das Zusammenspiel von Verwaltung, Politik und Zivilgesellschaft? Die Beitr{\"a}ger*innen untersuchen anhand von Fallstudien die Auswirkungen der Krise auf die kommunale Beteiligungskultur. Sie fragen mit interdisziplin{\"a}rem Blick nach der kommunalen Krisenbew{\"a}ltigung und erfolgreichen Governance-Strukturen im Kontext multipler Krisen. Ihr Ansatz der kritischen Urbanistik versteht sich dabei als Einladung zur Reflexion, Debatte und alternativen Praxis.}, subject = {Stadt}, language = {de} } @phdthesis{Torreiter, author = {Torreiter, Laura}, title = {St{\"a}dtebauliche Aufwertung im Leipziger Osten: Migrant:innen als Pioniere beim Erwerb und der Sanierung von Baudenkmalen}, doi = {10.25643/bauhaus-universitaet.6408}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230717-64081}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {209}, abstract = {Anhand der st{\"a}dtebaulichen und sozialen Transformation des {\"o}stlichen Gr{\"u}nderzeitgebietes von Leipzig wird die Rolle von migrantischen Hausbesitzenden und in der Bausanierung T{\"a}tigen im Aufwertungsprozess untersucht. Der Zugang zum Gegenstand verbindet Fragen der Stadtsoziologie und der Denkmalforschung. Im sozialen Feld der Stadterneuerung wird die Revitalisierung des ehemals von Leerstand und R{\"u}ckbau betroffenen Baubestandes ausgehandelt. Die Positionen der Akteur:innen im Feld werden durch ihre Ausstattung mit {\"o}konomischem, aber auch sozialem und kulturellem Kapital bestimmt. Angeh{\"o}rige der Planungs- und Denkmalbeh{\"o}rden verf{\"u}gen {\"u}ber institutionalisiertes Kulturkapital und stehen damit Kleineigent{\"u}mer:innen, h{\"a}ufig Autodidakt:innen, gegen{\"u}ber. Baudenkmale k{\"o}nnen {\"u}ber ihre Funktion als Geldanlage und Wohnraum hinaus Status repr{\"a}sentieren und symbolisch angeeignet werden. Denkmalschutz dient dem {\"o}ffentlichen Interesse am Erhalt historischer Bausubstanz. Bei Sanierungen bestehen die Herausforderungen der Vereinbarkeit von Konservierung und Modernisierung, der Finanzierbarkeit f{\"u}r Eigent{\"u}mer:innen und der Sozialvertr{\"a}glichkeit f{\"u}r Bewohnende. Eine Darstellung der historischen Entwicklung des Leipziger Ostens zu Beginn der Analyse veranschaulicht die Abh{\"a}ngigkeit kultureller, sozialer und {\"o}konomischer Werte des Baubestandes vom jeweiligen gesellschaftlichen Kontext. Planerische Konzepte f{\"u}r das Gebiet zeigen, dass eine sozio{\"o}konomische Stabilisierung und Imageverbesserung erreicht werden sollte durch das Aufgreifen von Potentialen, wie den denkmalgesch{\"u}tzten Bauten, dem zuziehenden alternativen Milieu und migrantischer {\"O}konomie. Es wird deutlich, dass nach einer initialen Ans{\"a}ssigkeit von Pionier:innen die {\"o}ffentlichen Infrastrukturmaßnahmen und Denkmalausweisungen eine Inwertsetzung v. a. durch externe Anlegende vorbereiteten. Darauf aufbauend wurden anhand einer qualitativen Befragung die Erfahrungen von st{\"a}dtischen Mitarbeitenden, Fachleuten und im Quartier Engagierten denen von lokalen migrantischen Hausbesitzenden und im Bereich Sanierung T{\"a}tigen gegen{\"u}bergestellt. Migrant:innengruppen haben den Stadtraum in einer Phase vorherrschender Abwanderung durch die Er{\"o}ffnung von Gesch{\"a}ften und Institutionen sowie den Erwerb von Immobilien f{\"u}r sich erschlossen. Strukturelle Benachteiligungen, wie Diskriminierung auf dem Arbeitsmarkt, ihre Ans{\"a}ssigkeit im sozial stigmatisierten Gebiet sowie geringes {\"o}konomisches Kapital versuchten sie durch den Einsatz von sozialem Kapital auszugleichen. Sanierungen erfolgten mit hoher Eigenleistung und R{\"u}ckgriff auf private Netzwerke. Die Analyse des Erneuerungsprozesses im Leipziger Osten zeigt, dass in einer initialen Phase Pionier:innen von Planenden und der Denkmalpflege als essentiell f{\"u}r die Entwicklung angesehen wurden. G{\"u}nstige Instandsetzungen durch Kleineigent{\"u}mer:innen wurden akzeptiert, um Geb{\"a}ude vor weiterem Verfall zu bewahren. Mit der zunehmenden Forderung nach Verwendung hochwertiger Materialen werden die Sanierungsleistungen nach {\"a}sthetischen und letztlich {\"o}konomischen Kriterien bewertet. Gegen{\"u}ber sozialen Folgen einer Aufwertung von Bausubstanz l{\"a}sst sich eine unkritische Haltung der Denkmalpflege erkennen. Bei der Vermarktung der Best{\"a}nde durch professionelle Investierende findet die Sozialgeschichte des Stadtteils wenig Ber{\"u}cksichtigung, positiv besetzte Merkmale des Quartiers, wie Multikulturalit{\"a}t werden selektiv aufgegriffen. Der Anteil migrantischer Akteur:innen an der Entwicklung wird durch die {\"O}ffentlichkeit unzureichend anerkannt. Auch die Wertsch{\"a}tzung von Planenden und im Quartier Engagierten erfolgt v. a. anhand des {\"o}konomischen Status. Hohe Erwartungen an die Gesch{\"a}ftsstruktur und die Erscheinung des Straßenbildes k{\"o}nnen nicht erf{\"u}llt werden. Migrantische Hausbesitzende und im Bereich Sanierung T{\"a}tige ben{\"o}tigen f{\"u}r die Auseinandersetzung mit der Denkmalpflege kulturelles Kapital. Sie erkennen die Bedeutung des historischen Baubestandes f{\"u}r die Stadt und die Arbeit der Institution an, kritisieren jedoch Sanierungsauflagen bzw. Mitarbeitende der Denkmalpflege und k{\"o}nnen sich z. T. gegen diese behaupten. Lokale migrantische Kleineigent{\"u}mer:innen leisten durch ihre Quartiersbindung einen Beitrag zur {\"o}konomischen und sozialen Stabilisierung. Mit ihrer Aufstiegsorientierung f{\"o}rdern sie in der Vermietungspraxis jedoch nur bedingt die Integration anderer Migrant:innen und grenzen sich von statusniedrigen Gruppen im Quartier ab. Migrantische Hausbesitzende und Unternehmende nehmen sich selbst als erfolgreiche Vorreitende in einer heterogener werdenden ostdeutschen Stadtgesellschaft wahr. Sie erkannten fr{\"u}hzeitig das Entwicklungspotential und geh{\"o}ren zu den Initiierenden und Profitierenden der Inwertsetzung.}, subject = {Leipzig}, language = {de} } @phdthesis{Ajjour, author = {Ajjour, Yamen}, title = {Addressing Controversial Topics in Search Engines}, doi = {10.25643/bauhaus-universitaet.6403}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230626-64037}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {133}, abstract = {Search engines are very good at answering queries that look for facts. Still, information needs that concern forming opinions on a controversial topic or making a decision remain a challenge for search engines. Since they are optimized to retrieve satisfying answers, search engines might emphasize a specific stance on a controversial topic in their ranking, amplifying bias in society in an undesired way. Argument retrieval systems support users in forming opinions about controversial topics by retrieving arguments for a given query. In this thesis, we address challenges in argument retrieval systems that concern integrating them in search engines, developing generalizable argument mining approaches, and enabling frame-guided delivery of arguments. Adapting argument retrieval systems to search engines should start by identifying and analyzing information needs that look for arguments. To identify questions that look for arguments we develop a two-step annotation scheme that first identifies whether the context of a question is controversial, and if so, assigns it one of several question types: factual, method, and argumentative. Using this annotation scheme, we create a question dataset from the logs of a major search engine and use it to analyze the characteristics of argumentative questions. The analysis shows that the proportion of argumentative questions on controversial topics is substantial and that they mainly ask for reasons and predictions. The dataset is further used to develop a classifier to uniquely map questions to the question types, reaching a convincing F1-score of 0.78. While the web offers an invaluable source of argumentative content to respond to argumentative questions, it is characterized by multiple genres (e.g., news articles and social fora). Exploiting the web as a source of arguments relies on developing argument mining approaches that generalize over genre. To this end, we approach the problem of how to extract argument units in a genre-robust way. Our experiments on argument unit segmentation show that transfer across genres is rather hard to achieve using existing sequence-to-sequence models. Another property of text which argument mining approaches should generalize over is topic. Since new topics appear daily on which argument mining approaches are not trained, argument mining approaches should be developed in a topic-generalizable way. Towards this goal, we analyze the coverage of 31 argument corpora across topics using three topic ontologies. The analysis shows that the topics covered by existing argument corpora are biased toward a small subset of easily accessible controversial topics, hinting at the inability of existing approaches to generalize across topics. In addition to corpus construction standards, fostering topic generalizability requires a careful formulation of argument mining tasks. Same side stance classification is a reformulation of stance classification that makes it less dependent on the topic. First experiments on this task show promising results in generalizing across topics. To be effective at persuading their audience, users of an argument retrieval system should select arguments from the retrieved results based on what frame they emphasize of a controversial topic. An open challenge is to develop an approach to identify the frames of an argument. To this end, we define a frame as a subset of arguments that share an aspect. We operationalize this model via an approach that identifies and removes the topic of arguments before clustering them into frames. We evaluate the approach on a dataset that covers 12,326 frames and show that identifying the topic of an argument and removing it helps to identify its frames.}, subject = {Informatik}, language = {en} } @article{Coenen, author = {Coenen, Ekkehard}, title = {Anti-Gewalttrainings, Gewaltwissen und die institutionelle Erzeugung gewaltbefreiter Subjekte}, series = {Soziale Passagen}, volume = {2023}, journal = {Soziale Passagen}, publisher = {VS, Verl. f{\"u}r Sozialwissenschaften/GWV-Fachverlag}, address = {Wiesbaden}, doi = {10.1007/s12592-023-00453-9}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230720-64104}, pages = {1 -- 16}, abstract = {Dieser Beitrag fragt danach, wie Wissen {\"u}ber Gewalt in Anti-Gewalttrainings produziert, vermittelt und sozial wirkm{\"a}chtig wird. Auf Basis des kommunikativen Konstruktivismus werden diese Kurse als gewaltbezogene Institutionen begriffen, in denen eine Wissensordnung der Gewalt stabilisiert wird. Sie sollen Abweichungen von institutionalisierten Wirklichkeitsvorstellungen in Bezug auf Gewalt entgegenwirken. Dabei lassen sie sich als Selbsttechniken begreifen, durch welche die Kursteilnehmer*innen eine spezifische Subjektposition ein{\"u}ben, n{\"a}mlich die des gewaltbefreiten Subjekts. Vor diesem Hintergrund wird anschließend zwischen konditionalen und konzessiven Anti-Gewalttrainings unterschieden. Erstere wenden sich an Personen, die tats{\"a}chlich von der institutionalisierten Wirklichkeitsvorstellung abgewichen sind und somit gesellschaftlich als Gewaltt{\"a}ter*innen eingestuft werden, w{\"a}hrend Letztere auf eine Klientel zielen, die potenziell von den g{\"a}ngigen Normen abweichen k{\"o}nnte, obwohl noch keine Gewalt aufgetreten sein muss. Abschließend wird gezeigt, dass den Kursleiter*innen eine wichtige Rolle im Subjektivierungsprozess und der Wissenskommunikation {\"u}ber Gewalt zukommt. Neben Wissen {\"u}ber Gewalt werden durch sie auch Wertbindungen, Legitimationen und Weltbilder vermittelt.}, subject = {Gewalt}, language = {de} } @article{VogelArnoldVoelkeretal., author = {Vogel, Albert and Arnold, J{\"o}rg and Voelker, Conrad and Kornadt, Oliver}, title = {Data for sound pressure level prediction in lightweight constructions caused by structure-borne sound sources and their uncertainties}, series = {Data in Brief}, volume = {2023}, journal = {Data in Brief}, number = {Volume 48, June 2023, article 109292}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.dib.2023.109292}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230719-64114}, pages = {1 -- 16}, abstract = {When predicting sound pressure levels induced by structure-borne sound sources and describing the sound propagation path through the building structure as exactly as possible, it is necessary to characterize the vibration behavior of the structure-borne sound sources. In this investigation, the characterization of structure-borne sound sources was performed using the two-stage method (TSM) described in EN 15657. Four different structure-borne sound sources were characterized and subsequently installed in a lightweight test stand. The resulting sound pressure levels in an adjacent receiving room were measured. In the second step, sound pressure levels were predicted according to EN 12354-5 based on the parameters of the structure-borne sound sources. Subsequently, the predicted and the measured sound pressure levels were compared to obtain reliable statements on the achievable accuracy when using source quantities determined by TSM with this prediction method.}, subject = {Bauakustik}, language = {en} } @phdthesis{Ashour, author = {Ashour, Mohammed}, title = {Electromechanics and Hydrodynamics of Single Vesicles and Vesicle Doublet Using Phase-Field Isogeometric Analysis}, doi = {10.25643/bauhaus-universitaet.6400}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230628-64003}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {175}, abstract = {Biomembranes are selectively permeable barriers that separate the internal components of the cell from its surroundings. They have remarkable mechanical behavior which is characterized by many phenomena, but most noticeably their fluid-like in-plane behavior and solid-like out-of-plane behavior. Vesicles have been studied in the context of discrete models, such as Molecular Dynamics, Monte Carlo methods, Dissipative Particle Dynamics, and Brownian Dynamics. Those methods, however, tend to have high computational costs, which limited their uses for studying atomistic details. In order to broaden the scope of this research, we resort to the continuum models, where the atomistic details of the vesicles are neglected, and the focus shifts to the overall morphological evolution. Under the umbrella of continuum models, vesicles morphology has been studied extensively. However, most of those studies were limited to the mechanical response of vesicles by considering only the bending energy and aiming for the solution by minimizing the total energy of the system. Most of the literature is divided between two geometrical representation methods; the sharp interface methods and the diffusive interface methods. Both of those methods track the boundaries and interfaces implicitly. In this research, we focus our attention on solving two non-trivial problems. In the first one, we study a constrained Willmore problem coupled with an electrical field, and in the second one, we investigate the hydrodynamics of a vesicle doublet suspended in an external viscous fluid flow. For the first problem, we solve a constrained Willmore problem coupled with an electrical field using isogeometric analysis to study the morphological evolution of vesicles subjected to static electrical fields. The model comprises two phases, the lipid bilayer, and the electrolyte. This two-phase problem is modeled using the phase-field method, which is a subclass of the diffusive interface methods mentioned earlier. The bending, flexoelectric, and dielectric energies of the model are reformulated using the phase-field parameter. A modified Augmented-Lagrangian (ALM) approach was used to satisfy the constraints while maintaining numerical stability and a relatively large time step. This approach guarantees the satisfaction of the constraints at each time step over the entire temporal domain. In the second problem, we study the hydrodynamics of vesicle doublet suspended in an external viscous fluid flow. Vesicles in this part of the research are also modeled using the phase-field model. The bending energy and energies associated with enforcing the global volume and area are considered. In addition, the local inextensibility condition is ensured by introducing an additional equation to the system. To prevent the vesicles from numerically overlapping, we deploy an interaction energy definition to maintain a short-range repulsion between the vesicles. The fluid flow is modeled using the incompressible Navier-Stokes equations and the vesicle evolution in time is modeled using two advection equations describing the process of advecting each vesicle by the fluid flow. To overcome the velocity-pressure saddle point system, we apply the Residual-Based Variational MultiScale (RBVMS) method to the Navier-Stokes equations and solve the coupled systems using isogeometric analysis. We study vesicle doublet hydrodynamics in shear flow, planar extensional flow, and parabolic flow under various configurations and boundary conditions. The results reveal several interesting points about the electrodynamics and hydrodynamics responses of single vesicles and vesicle doublets. But first, it can be seen that isogeometric analysis as a numerical tool has the ability to model and solve 4th-order PDEs in a primal variational framework at extreme efficiency and accuracy due to the abilities embedded within the NURBS functions without the need to reduce the order of the PDE by creating an intermediate environment. Refinement whether by knot insertion, order increasing or both is far easier to obtain than traditional mesh-based methods. Given the wide variety of phenomena in natural sciences and engineering that are mathematically modeled by high-order PDEs, the isogeometric analysis is among the most robust methods to address such problems as the basis functions can easily attain high global continuity. On the applicational side, we study the vesicle morphological evolution based on the electromechanical liquid-crystal model in 3D settings. This model describing the evolution of vesicles is composed of time-dependent, highly nonlinear, high-order PDEs, which are nontrivial to solve. Solving this problem requires robust numerical methods, such as isogeometric analysis. We concluded that the vesicle tends to deform under increasing magnitudes of electric fields from the original sphere shape to an oblate-like shape. This evolution is affected by many factors and requires fine-tuning of several parameters, mainly the regularization parameter which controls the thickness of the diffusive interface width. But it is most affected by the method used for enforcing the constraints. The penalty method in presence of an electrical field tends to lock on the initial phase-field and prevent any evolution while a modified version of the ALM has proven to be sufficiently stable and accurate to let the phase-field evolve while satisfying the constraints over time at each time step. We show additionally the effect of including the flexoelectric nature of the Biomembranes in the computation and how it affects the shape evolution as well as the effect of having different conductivity ratios. All the examples were solved based on a staggered scheme, which reduces the computational cost significantly. For the second part of the research, we consider vesicle doublet suspended in a shear flow, in a planar extensional flow, and in a parabolic flow. When the vesicle doublet is suspended in a shear flow, it can either slip past each other or slide on top of each other based on the value of the vertical displacement, that is the vertical distance between the center of masses between the two vesicles, and the velocity profile applied. When the vesicle doublet is suspended in a planar extensional flow in a configuration that resembles a junction, the time in which both vesicles separate depends largely on the value of the vertical displacement after displacing as much fluid from between the two vesicles. However, when the vesicles are suspended in a tubular channel with a parabolic fluid flow, they develop a parachute-like shape upon converging towards each other before exiting the computational domain from the predetermined outlets. This shape however is affected largely by the height of the tubular channel in which the vesicle is suspended. The velocity essential boundary conditions are imposed weakly and strongly. The weak implementation of the boundary conditions was used when the velocity profile was defined on the entire boundary, while the strong implementation was used when the velocity profile was defined on a part of the boundary. The strong implementation of the essential boundary conditions was done by selectively applying it to the predetermined set of elements in a parallel-based code. This allowed us to simulate vesicle hydrodynamics in a computational domain with multiple inlets and outlets. We also investigate the hydrodynamics of oblate-like shape vesicles in a parabolic flow. This work has been done in 2D configuration because of the immense computational load resulting from a large number of degrees of freedom, but we are actively seeking to expand it to 3D settings and test a broader set of parameters and geometrical configurations.}, subject = {Isogeometrische Analyse}, language = {en} } @phdthesis{Mthunzi, author = {Mthunzi, Everett}, title = {Interactive Surface Environments: Design and Implementation}, doi = {10.25643/bauhaus-universitaet.6406}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230704-64065}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {128}, abstract = {This dissertation presents three studies on the design and implementation of interactive surface environments. It puts forward approaches to engineering interactive surface prototypes using prevailing methodologies and technologies. The scholarly findings from each study have been condensed into academic manuscripts, which are conferred herewith. The first study identifies a communication gap between engineers of interactive surface systems (i.e., originators of concepts) and future developers. To bridge the gap, it explores a UML-based framework to establish a formal syntax for modeling hardware, middleware, and software of interactive surface prototypes. The proposed framework targets models-as-end-products, towards enabling a shared view of research prototypes thereby facilitating dialogue between concept originators and future developers. The second study positions itself to support developers with an open-source solution for exploiting 3D point clouds for interactive tabletop applications using CPU architectures. Given dense 3D point-cloud representations of tabletop environments, the study aims toward mitigating high computational effort by segmenting candidate interaction regions as a preprocessing step. The study contributes a robust open-source solution for reducing computational costs when leveraging 3D point clouds for interactive tabletop applications. The solution itself is flexible and adaptable to variable interactive surface applications. The third study contributes an archetypal concept for integrating mobile devices as active components in augmented tabletop surfaces. With emphasis on transparent development trails, the study demonstrates the utility of the open-source tool developed in the second study. In addition to leveraging 3D point clouds for real-time interaction, the research considers recent advances in computer vision and wireless communication to realize a modern, interactive tabletop application. A robust strategy that combines spatial augmented reality, point-cloud-based depth perception, CNN-based object detection, and Bluetooth communication is put forward. In addition to seamless communication between adhoc mobile devices and interactive tabletop systems, the archetypal concept demonstrates the benefits of preprocessing point clouds by segmenting candidate interaction regions, as suggested in the second study. Collectively, the studies presented in this dissertation contribute; 1—bridging the gap between originators of interactive surface concepts and future developers, 2— promoting the exploration of 3D point clouds for interactive surface applications using CPU-based architectures, and 3—leveraging 3D point clouds together with emerging CNN-based object detection, and Bluetooth communication technologies to advance existing surface interaction concepts.}, subject = {Mensch-Maschiene-Kommunikation}, language = {en} } @misc{Lenz, type = {Master Thesis}, author = {Lenz, Juliane}, title = {„Baus{\"u}nde" oder Denkmal? Zur Diskussion {\"u}ber den Umgang mit verschm{\"a}hten Bauwerken}, doi = {10.25643/bauhaus-universitaet.6397}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230606-63979}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {187}, abstract = {F{\"u}r die einen also „Baus{\"u}nde", f{\"u}r die anderen ein erhaltenswertes Bauwerk - wie geht man damit um? F{\"u}r wen gilt wann etwas als „Baus{\"u}nde" und wann als erhaltenswert, welche Ziele werden damit verfolgt und Konzepte aufgezeigt? Inwieweit spielen beispielsweise Aspekte wie {\"A}sthetik, Funktionalit{\"a}t oder der allgemeine gesellschaftliche Kontext bzw. Wandel sowie das jeweils aktuelle und bauzeitliche planerische Leitbild bzw. Verst{\"a}ndnis eine Rolle bei der Verwendung des Begriffs und den Umgang f{\"u}r konkrete Bauwerke? Und inwieweit steht der Erhaltungswert bzw. eine Denkmalw{\"u}rdigkeit damit im Verh{\"a}ltnis und wie kann damit planerisch umgegangen werden? Der Diskussion {\"u}ber den Umgang mit verschm{\"a}hten Bauwerken will sich die vorliegende Abschlussarbeit n{\"a}hern. Als Bauwerke werden hierbei sowohl Geb{\"a}ude und Pl{\"a}tze als auch zur Erinnerung gesetzte Objekte wie Statuen verstanden.}, subject = {Denkmalpflege}, language = {de} } @inproceedings{BaronMandavereCheruiyot, author = {Baron, Nicole and Mandavere, Melody and Cheruiyot, Roselyne}, title = {SE/ NPO Ecosystems and urban Governance in Johannesburg}, series = {ISTR, Fifteenth International Conference, Montreal, Canada}, booktitle = {ISTR, Fifteenth International Conference, Montreal, Canada}, doi = {10.25643/bauhaus-universitaet.6364}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63643}, pages = {47}, abstract = {This paper presents initial findings from the empirical analysis of community based social enterprise (SE) and non-profit organisation (NPO) ecosystems in Johannesburg. SEs and NPOs are widely recognised as contributors to the resilience of marginalised urban communities. However, the connection between these organisations , urban governance, and community resilience has not yet been sufficiently understood , particularly in African urban contexts. The 'Resilient Urban Communities' project focuses on Johannesburg as a case study to shed light on this under-researched topic. The key to exploring it is understanding SEs and NPOs as providers of public services, job creators, and promoters of good governance, all of which contribute to community resilience. Using this premise as a starting point, this paper investigates ecosystem conditions with a particular focus on state-civil society partnerships. Empirical data was generated through semi-struc-tured interviews and analysed with a grounded theory approach. Preliminary results of this ongoing research reveal that urban geography is a relevant ecosystem factor for SEs and NPOs from marginalised communities. We also suggest that co-production could be an opportunity for growth within the investigated state-civil society partnership.}, subject = {S{\"u}dafrika}, language = {en} } @misc{VollmerCalbetiEliasRaabetal., author = {Vollmer, Lisa and Calbet i Elias, Laura and Raab, Susanna and Zanders, Theresa and Kleine, Aya}, title = {Ko-Produktion. Ein Handlungsleitfaden f{\"u}r die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und {\"o}ffentlichen Verwaltungen}, edition = {Erste Auflage}, doi = {10.25643/bauhaus-universitaet.4954}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230413-49549}, pages = {57}, abstract = {Dieser Handlungsleitfaden m{\"o}chte die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und {\"o}ffentlichen Verwaltungen erleichtern. Er enth{\"a}lt allerdings kein Patentrezept, mit dem eine solche Zusammenarbeit gebacken werden kann, sondern vor allem Anst{\"o}ße, was es dabei alles zu bedenken gilt. Denn Ko-Produktionsprozesse, bei denen zivilgesellschaftliche Gruppen und Verwaltungen gemeinsam an der Umsetzung von Dienstleistungen und Infrastrukturen der Daseinsvorsorge arbeiten, sind komplexe und noch recht unerprobte Prozesse.}, subject = {Koproduktion}, language = {de} } @article{AlemuHabteLahmeretal., author = {Alemu, Yohannes L. and Habte, Bedilu and Lahmer, Tom and Urgessa, Girum}, title = {Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings}, series = {Asian Journal of Civil Engineering}, volume = {2023}, journal = {Asian Journal of Civil Engineering}, publisher = {Springer International Publishing}, address = {Cham}, doi = {10.1007/s42107-023-00640-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63677}, pages = {1 -- 11}, abstract = {As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes.}, subject = {Bodenmechanik}, language = {en} } @article{SimonRitz, author = {Simon-Ritz, Frank}, title = {"Kultur ist Reichtum an Problemen": Wie sich der Kultur-Begriff der UNESCO an Egon Friedell ann{\"a}herte}, series = {Palmbaum: Literarisches Journal aus Th{\"u}ringen}, volume = {2023}, journal = {Palmbaum: Literarisches Journal aus Th{\"u}ringen}, number = {Heft 1}, publisher = {Quartus Verlag}, address = {Bucha bei Jena}, doi = {10.25643/bauhaus-universitaet.4952}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230411-49524}, pages = {4}, abstract = {Der in H. 1/2023 erschienene Essay f{\"u}hrt Gedanken einer in H. 1/2022 des "Palmbaum" erschienene Betrachtung (https://doi.org/10.25643/bauhaus-universitaet.4628) weiter. Im Zentrum stehen dabei die Bem{\"u}hungen der UNESCO um das immaterielle Kulturerbe.}, subject = {UNESCO}, language = {de} } @phdthesis{Dokhanchi, author = {Dokhanchi, Najmeh Sadat}, title = {Measurement of the Indoor Air Temperature Distribution using Acoustic Travel-Time Tomography}, isbn = {978-3-00-075344-2 (print)}, doi = {10.25643/bauhaus-universitaet.4956}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230414-49567}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {155}, abstract = {One of the main criteria determining the thermal comfort of occupants is the air temperature. To monitor this parameter, a thermostat is traditionally mounted in the indoor environment for instance in office rooms in the workplaces, or directly on the radiator or in another location in a room. One of the drawbacks of this conventional method is the measurement at a certain location instead of the temperature distribution in the entire room including the occupant zone. As a result, the climatic conditions measured at the thermostat point may differ from those at the user's location. This not only negatively impacts the thermal comfort assessment but also leads to a waste of energy due to unnecessary heating and cooling. Moreover, for measuring the distribution of the air temperature under laboratory conditions, multiple thermal sensors should be installed in the area under investigation. This requires high effort in both installation and expense. To overcome the shortcomings of traditional sensors, Acoustic travel-time TOMography (ATOM) offers an alternative based on measuring the transmission sound velocity signals. The basis of the ATOM technique is the first-order dependency of the sound velocity on the medium's temperature. The average sound velocity, along the propagation paths, can be determined by travel-times estimation of a defined acoustic signal between transducers. After the travel-times collection, the room is divided into several volumetric grid cells, i.e. voxels, whose sizes are defined depending on the dimension of the room and the number of sound paths. Accordingly, the spatial air temperature in each voxel can be determined using a suitable tomographic algorithm. Recent studies indicate that despite the great potential of this technique to detect room climate, few experiments have been conducted. This thesis aims to develop the ATOM technique for indoor climatic applications while coupling the analysis methods of tomography and room acoustics. The method developed in this thesis uses high-energy early reflections in addition to the direct paths between transducers for travel time estimation. In this way, reflections can provide multiple sound paths that allow the room coverage to be maintained even when a few or even only one transmitter and receiver are used. In the development of the ATOM measurement system, several approaches have been employed, including the development of numerical methods and simulations and conducting experimental measurements, each of which has contributed to the improvement of the system's accuracy. In order to effectively separate the early reflections and ensure adequate coverage of the room with sound paths, a numerical method was developed based on the optimization of the coordinates of the sound transducers in the test room. The validation of the optimal positioning method shows that the reconstructed temperatures were significantly improved by placing the transducers at the optimal coordinates derived from the developed numerical method. The other numerical method developed is related to the selection of the travel times of the early reflections. Accordingly, the detection of the travel times has been improved by adjusting the lengths of the multiple analysis time-windows according to the individual travel times in the reflectogram of the room impulse response. This can reduce the probability of trapping faulty travel times in the analysis time-windows. The simulation model used in this thesis is based on the image source model (ISM) method for simulating the theoretical travel times of early reflection sound paths. The simulation model was developed to simulate the theoretical travel times up to third-order reflections. The empirical measurements were carried out in the climate lab of the Chair of Building Physics under different boundary conditions, i.e., combinations of different room air temperatures under both steady-state and transient conditions, and different measurement setups. With the measurements under controllable conditions in the climate lab, the validity of the developed numerical methods was confirmed. In this thesis, the performance of the ATOM measurement system was evaluated using two measurement setups. The setup for the initial investigations consists of an omnidirectional receiver and a near omnidirectional sound source, keeping the number of transducers as few as possible. This has led to accurately identify the sources of error that could occur in each part of the measuring system. The second measurement setup consists of two directional sound sources and one omnidirectional receiver. This arrangement of transducers allowed a higher number of well-detected travel times for tomography reconstruction, a better travel time estimation due to the directivity of the sound source, and better space utilization. Furthermore, this new measurement setup was tested to determine an optimal selection of the excitation signal. The results showed that for the utilized setup, a linear chirp signal with a frequency range of 200 - 4000 Hz and a signal duration of t = 1 s represents an optimal selection with respect to the reliability of the measured travel times and higher signal-to-noise ratio (SNR). To evaluate the performance of the measuring setups, the ATOM temperatures were always compared with the temperatures of high-resolution NTC thermistors with an accuracy of ±0.2 K. The entire measurement program, including acoustic measurements, simulation, signal processing, and visualization of measurement results are performed in MATLAB software. In addition, to reduce the uncertainty of the positioning of the transducers, the acoustic centre of the loudspeaker was determined experimentally for three types of excitation signals, namely MLS (maximum length sequence) signals with different lengths and duration, linear and logarithmic chirp signals with different defined frequency ranges. For this purpose, the climate lab was converted into a fully anechoic chamber by attaching absorption panels to the entire surfaces of the room. The measurement results indicated that the measurement of the acoustic centre of the sound source significantly reduces the displacement error of the transducer position. Moreover, to measure the air temperature in an occupied room, an algorithm was developed that can convert distorted signals into pure reference signals using an adaptive filter. The measurement results confirm the validity of the approach for a temperature interval of 4 K inside the climate lab. Accordingly, the accuracy of the reconstructed temperatures indicated that ATOM is very suitable for measuring the air temperature distribution in rooms.}, subject = {Bauphysik}, language = {en} } @article{GuoAlajlanZhuangetal., author = {Guo, Hongwei and Alajlan, Naif and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Physics-informed deep learning for three-dimensional transient heat transfer analysis of functionally graded materials}, series = {Computational Mechanics}, volume = {2023}, journal = {Computational Mechanics}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/s00466-023-02287-x}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63666}, pages = {1 -- 12}, abstract = {We present a physics-informed deep learning model for the transient heat transfer analysis of three-dimensional functionally graded materials (FGMs) employing a Runge-Kutta discrete time scheme. Firstly, the governing equation, associated boundary conditions and the initial condition for transient heat transfer analysis of FGMs with exponential material variations are presented. Then, the deep collocation method with the Runge-Kutta integration scheme for transient analysis is introduced. The prior physics that helps to generalize the physics-informed deep learning model is introduced by constraining the temperature variable with discrete time schemes and initial/boundary conditions. Further the fitted activation functions suitable for dynamic analysis are presented. Finally, we validate our approach through several numerical examples on FGMs with irregular shapes and a variety of boundary conditions. From numerical experiments, the predicted results with PIDL demonstrate well agreement with analytical solutions and other numerical methods in predicting of both temperature and flux distributions and can be adaptive to transient analysis of FGMs with different shapes, which can be the promising surrogate model in transient dynamic analysis.}, subject = {W{\"a}rme{\"u}bergang}, language = {en} } @article{SchwenkeSoebkeKraft, author = {Schwenke, Nicolas and S{\"o}bke, Heinrich and Kraft, Eckhard}, title = {Potentials and Challenges of Chatbot-Supported Thesis Writing: An Autoethnography}, series = {Trends in Higher Education}, volume = {2023}, journal = {Trends in Higher Education}, number = {Volume 2, issue 4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/higheredu2040037}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231207-65016}, pages = {611 -- 635}, abstract = {The release of the large language model-based chatbot ChatGPT 3.5 in November 2022 has brought considerable attention to the subject of artificial intelligence, not only to the public. From the perspective of higher education, ChatGPT challenges various learning and assessment formats as it significantly reduces the effectiveness of their learning and assessment functionalities. In particular, ChatGPT might be applied to formats that require learners to generate text, such as bachelor theses or student research papers. Accordingly, the research question arises to what extent writing of bachelor theses is still a valid learning and assessment format. Correspondingly, in this exploratory study, the first author was asked to write his bachelor's thesis exploiting ChatGPT. For tracing the impact of ChatGPT methodically, an autoethnographic approach was used. First, all considerations on the potential use of ChatGPT were documented in logs, and second, all ChatGPT chats were logged. Both logs and chat histories were analyzed and are presented along with the recommendations for students regarding the use of ChatGPT suggested by a common framework. In conclusion, ChatGPT is beneficial for thesis writing during various activities, such as brainstorming, structuring, and text revision. However, there are limitations that arise, e.g., in referencing. Thus, ChatGPT requires continuous validation of the outcomes generated and thus fosters learning. Currently, ChatGPT is valued as a beneficial tool in thesis writing. However, writing a conclusive thesis still requires the learner's meaningful engagement. Accordingly, writing a thesis is still a valid learning and assessment format. With further releases of ChatGPT, an increase in capabilities is to be expected, and the research question needs to be reevaluated from time to time.}, subject = {Chatbot}, language = {en} } @article{BertramAltrock, author = {Bertram, Grischa Frederik and Altrock, Uwe}, title = {Jenseits agonistischer Planungstheorien: Die „Normalit{\"a}t"von Protesten und ihr Einfluss auf die Konfliktaustragungin der r{\"a}umlichen Planung}, series = {Raumforschung und Raumordnung}, volume = {2023}, journal = {Raumforschung und Raumordnung}, number = {Vol. 81, No. 5}, publisher = {oekom Verlag}, address = {M{\"u}nchen}, doi = {10.14512/rur.1674}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231207-64995}, pages = {493 -- 508}, abstract = {Die Planungsforschung hat sich sp{\"a}testens seit der „kommunikativen Wende" intensiv damit besch{\"a}ftigt, wie mit Konflikten umgegangen werden soll und wird. Ans{\"a}tze der „agonistischen" Planungstheorie widersprechen der normativen Pr{\"a}misse, Konsensbildung unter den Planungsbeteiligten anzustreben. Vielmehr wollen sie widerstreitende Positionen normativ f{\"u}r die r{\"a}umliche Entwicklung fruchtbar machen. Zugleich betonen sie eine vermeintliche Dualit{\"a}t von Planung und Protest, die in der neueren Protesttheorie infrage gestellt wird. Dieser Beitrag zeigt aufbauend auf einer Diskussion von planungs- und protesttheoretischen Ans{\"a}tzen und einer empirischen Analyse planungsbezogener Proteste in Deutschland, dass diese Proteste von den Planungsakteuren zwar immer st{\"a}rker als „Normalit{\"a}t" aufgefasst werden und antagonistische Partizipation trotz zunehmender Konflikthaftigkeit und vermeintlicher Infragestellung der repr{\"a}sentativen Demokratie kulturell regelgebunden bleibt. Protesthandeln ist Teil ausdifferenzierter „Partizipationsb{\"u}ndel", die situationsbezogen auch Teilnahme an Beteiligungsverfahren, direktdemokratische Verfahren und Klagen umfassen. Protestierende verfolgen dabei meist eine eher reformorientierte Agenda, die keiner „Z{\"a}hmung" bedarf. Allerdings k{\"o}nnen die zugrunde liegenden Konflikte h{\"a}ufig gar nicht „gel{\"o}st" werden. Planenden hingegen k{\"o}nnen auch innerhalb eines agonistischen Planungsumfelds rationalistische und deliberative Ans{\"a}tze zur Verf{\"u}gung stehen, die sie situationsbezogen und strategisch nutzen.}, subject = {Raumplanung}, language = {de} } @article{AnsariTartaglioneKoenke, author = {Ansari, Meisam and Tartaglione, Fabiola and K{\"o}nke, Carsten}, title = {Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration}, series = {materials}, volume = {2023}, journal = {materials}, number = {volume 16, issue 14, article 5029}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma16145029}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230818-64154}, pages = {1 -- 17}, abstract = {Structures and their components experience substantially large vibration amplitudes at resonance, which can cause their failure. The scope of this study is the utilization of silicone-coated steel balls in concrete as damping aggregates to suppress the resonance vibration. The heavy steel cores oscillate with a frequency close to the resonance frequency of the structure. Due to the phase difference between the vibrations of the cores and the structure, the cores counteract the vibration of the structure. The core-coating inclusions are randomly distributed in concrete similar to standard aggregates. This mixture is referred to as metaconcrete. The main goal of this work is to validate the ability of the inclusions to suppress mechanical vibration through laboratory experiments. For this purpose, two small-scale metaconcrete beams were cast and tested. In a free vibration test, the metaconcrete beams exhibited a larger damping ratio compared to a similar beam cast from conventional concrete. The vibration amplitudes of the metaconcrete beams at resonance were measured with a frequency sweep test. In comparison with the conventional concrete beam, both metaconcrete beams demonstrated smaller vibration amplitudes. Both experiments verified an improvement in the dynamic response of the metaconcrete beams at resonance vibration.}, subject = {Beton}, language = {en} } @phdthesis{Keller, author = {Keller, Enrico}, title = {Die Verwaltung von Dienstliegenschaften auf staatlicher Ebene - {\"U}ber das Wirken {\"o}konomischer Modelle in einem haushaltswirtschaftlichen Umfeld}, doi = {10.25643/bauhaus-universitaet.6421}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230914-64216}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {393}, abstract = {Diese Arbeit soll einen Beitrag zum Neuen Steuerungsmodell der {\"O}ffentlichen Verwaltung auf staatlicher Ebene in Deutschland leisten. Sie dient der Untersuchung zum Aufbau eines {\"o}konomischen Modells zur Koordination von Dienstliegenschaften auf staatlicher Ebene. Die Untersuchung der Dienstliegenschaften zeigt, dass diese eine interne Dienstbarkeit des Staates als Wirtschaftssubjekt an den Staat als Hoheitstr{\"a}ger fingieren. Die Untersuchung der Liegenschaftsverwaltung belegt, dass sie vor allem ein Controlling-Instrument f{\"u}r den Informationsfluss zu Entscheidungen {\"u}ber Dienstliegenschaften zwischen dem Hoheitstr{\"a}ger und dem Wirtschaftssubjekt darstellt. Die Untersuchung der Transaktionskosten beweist, dass eine Koordination am effizientesten {\"u}ber die eigene Organisation mittels dezentraler Aufgabenkonzentration in Form eines SSC erreicht werden kann. Die Untersuchung der Handlungs- und Verf{\"u}gungsrechte ergab, dass die Verf{\"u}gungsrechte an den Dienstliegenschaften weiter den Ressorts bzw. Nutzern obliegen. Allein das Handlungsrecht der Aufgabenwahrnehmung ist an die Liegenschaftsverwaltung {\"u}bergegangen. Die Untersuchung der Prinzipal-Agent-Verh{\"a}ltnisse teilt der Liegenschaftsverwaltung die Rolle eines Erf{\"u}llungsgehilfen des Wirtschaftssubjektes zu. Die monet{\"a}re Abwicklung der Ge-sch{\"a}fte zwischen dem Wirtschaftssubjekt und dem Hoheitstr{\"a}ger obliegt als zuarbeitende Organisationseinheit ohne eigene Entscheidungsgewalt der Liegenschaftsverwaltung. Aus diesen Thesen ergeben sich monet{\"a}re Handlungsm{\"o}glichkeiten, die in den Aufbau des Modells einfließen. Es r{\"u}ckt das Wirtschaftssubjekt als Entscheidungstr{\"a}ger {\"u}ber den Ressourceneinsatz in den Mittelpunkt der Betrachtung. Der Hoheitstr{\"a}ger ist hierbei nur der Forderungsberechtigte an das Wirtschaftssubjekt und die Liegenschaftsverwaltung dessen immobilienwirtschaftlicher Vertreter. Diese Konstellation ber{\"u}cksichtigend erfolgt dem Credo des NPM gem{\"a}ß die Beschreibung des Modells und des institutionellen Arrangements nach den g{\"a}ngigen Modellen aus der Privatwirtschaft. Anhand der Untersuchungsergebnisse wird eine Liegenschaftsverwaltung skizziert, welche einerseits den tats{\"a}chlichen betriebswirtschaftlichen Anforderungen der Immobilienwirtschaft und andererseits den Gegebenheiten des haushaltswirtschaftlichen Umfeldes der {\"o}ffentlichen Verwaltung gerecht werden kann. Das aufgebaute Realmodell dient gleichzeitig dem Vergleich mit dem bestehenden und in der Praxis angewandten Mieter-Vermieter-Modell als Idealmodell. Der Vergleich zeigt, dass sich aus der Untersuchung zivilrechtlicher Institutionen zwar kein schuldrechtliches, wohl aber ein dingliches Recht ableiten l{\"a}sst. Damit einher geht die Vermutung, dass es sich bei dem Mieter-Vermieter-Modell im staatlichen Bereich um einen Fall von Modellplatonismus handelt.}, subject = {Neues Steuerungsmodell}, language = {de} } @phdthesis{Velte, author = {Velte, Jens Walter}, title = {Der Schl{\"u}ssel als Objekt im Wandel der Zeit}, doi = {10.25643/bauhaus-universitaet.6424}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230921-64243}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {323}, abstract = {In der Welt der Objekte z{\"a}hlt der Schl{\"u}ssel zu den wichtigsten und {\"a}ltesten Gebrauchs-gegenst{\"a}nden der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeing{\"u}ltigen Produkts der heutigen Dingwelt in den Fokus gestellt. Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schl{\"u}ssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien. Auf der Grundlage von strukturierten Daten sollen Maßnahmen f{\"u}r eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verst{\"a}ndnis f{\"u}r den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu k{\"o}nnen. Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verst{\"a}ndnis der historischen Untersuchungen, den Erkenntnissen der durchgef{\"u}hrten Studien und einem praxisorientierten Entstehungs-prozess k{\"u}nftige Ideen und Ans{\"a}tze, eine fortw{\"a}hrende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte f{\"o}rderlich zu betrachten und einsetzen zu k{\"o}nnen.}, subject = {Schl{\"u}ssel}, language = {de} } @article{LizarazuHarirchianShaiketal., author = {Lizarazu, Jorge and Harirchian, Ehsan and Shaik, Umar Arif and Shareef, Mohammed and Antoni-Zdziobek, Annie and Lahmer, Tom}, title = {Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics}, series = {Results in Engineering}, volume = {2023}, journal = {Results in Engineering}, number = {Volume 20 (2023)}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.rineng.2023.101587}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231207-65028}, pages = {1 -- 12}, abstract = {The study presents a Machine Learning (ML)-based framework designed to forecast the stress-strain relationship of arc-direct energy deposited mild steel. Based on microstructural characteristics previously extracted using microscopy and X-ray diffraction, approximately 1000 new parameter sets are generated by applying the Latin Hypercube Sampling Method (LHSM). For each parameter set, a Representative Volume Element (RVE) is synthetically created via Voronoi Tessellation. Input raw data for ML-based algorithms comprises these parameter sets or RVE-images, while output raw data includes their corresponding stress-strain relationships calculated after a Finite Element (FE) procedure. Input data undergoes preprocessing involving standardization, feature selection, and image resizing. Similarly, the stress-strain curves, initially unsuitable for training traditional ML algorithms, are preprocessed using cubic splines and occasionally Principal Component Analysis (PCA). The later part of the study focuses on employing multiple ML algorithms, utilizing two main models. The first model predicts stress-strain curves based on microstructural parameters, while the second model does so solely from RVE images. The most accurate prediction yields a Root Mean Squared Error of around 5 MPa, approximately 1\% of the yield stress. This outcome suggests that ML models offer precise and efficient methods for characterizing dual-phase steels, establishing a framework for accurate results in material analysis.}, subject = {Maschinelles Lernen}, language = {en} } @article{PollackLueckWolfetal., author = {Pollack, Moritz and L{\"u}ck, Andrea and Wolf, Mario and Kraft, Eckhard and V{\"o}lker, Conrad}, title = {Energy and Business Synergy: Leveraging Biogenic Resources from Agriculture, Waste, and Wastewater in German Rural Areas}, series = {Sustainability}, volume = {2023}, journal = {Sustainability}, number = {volume 15, issue 24, article 16573}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/su152416573}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231222-65172}, pages = {1 -- 25}, abstract = {The imperative to transform current energy provisions is widely acknowledged. However, scant attention has hitherto been directed toward rural municipalities and their innate resources, notably biogenic resources. In this paper, a methodological framework is developed to interconnect resources from waste, wastewater, and agricultural domains for energy utilization. This entails cataloging existing resources, delineating their potential via quantitative assessments utilizing diverse technologies, and encapsulating them in a conceptual model. The formulated models underwent iterative evaluation with engagement from diverse stakeholders. Consequently, 3 main concepts, complemented by 72 sub-concepts, were delineated, all fostering positive contributions to climate protection and providing heat supply in the rural study area. The outcomes' replicability is underscored by the study area's generic structure and the employed methodology. Through these inquiries, a framework for the requisite energy transition, with a pronounced emphasis on the coupling of waste, wastewater, and agriculture sectors in rural environments, is robustly analyzed.}, subject = {Energiewende}, language = {en} } @misc{KleineCalbetiElias, author = {Kleine, Aya and Calbet i Elias, Laura}, title = {Gemeinwohlorientierte Bodennutzung in Kooperation. Ein Handlungsleitfaden f{\"u}r {\"o}ffentlich-zivielgesellschaftliche Partnerschaften}, editor = {Calbet i Elias, Laura and Vollmer, Lisa and Kleine, Aya}, edition = {Erste Auflage}, doi = {10.25643/bauhaus-universitaet.6398}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230609-63988}, pages = {56}, abstract = {Dieser Handlungsleitfaden m{\"o}chte die gemeinwohlorientierte Vergabe von R{\"a}umen und Fl{\"a}chen an zivilgesellschaftliche Gruppen st{\"a}rken. Er ist als Inspirationssammlung zu verstehen, die den Weg zu neuen Kooperationen zwischen {\"o}ffentlichen und zivilgesellschaftlichen Akteuren erleichtern soll. Wissenswertesund inspirierende Beispiele bieten eine Starthilfe, um nicht nur einzelne stadtr{\"a}umliche Experimente zu wagen, sondern die gemeinwohlorientierte Fl{\"a}chen- und Raumvergabe an zivilgesellschaftliche Gruppen kommunal zu verankern. Denn {\"o}ffentliche Liegenschaften sind nach vielen Jahren der Privatisierung eine rare Ressource, die umso mehr dem Gemeinwohl dienen sollte.}, subject = {Liegenschaftspolitik}, language = {de} } @phdthesis{Jeremejewa, author = {Jeremejewa, Jelena}, title = {Der Erfahrung auf der Spur}, publisher = {Neofelis}, address = {Berlin}, isbn = {ISBN 978-3-95808-423-0}, doi = {10.52007/9783958084742}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230822-64180}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {428}, abstract = {Dieselbe Zeit, derselbe Raum - zwei, grundverschiedene Regisseure und damit Erfahrungswelten. Aleksandr Rastorguevs und Sergei Loznitsas Dokumentarfilme der 90er und 2000er Jahre sind politische, poetische, punktgenaue Interventionen in die Gegenwart der „kleinen Menschen". Das Buch widmet sich dokumentarfilmischen Meisterwerken, die methodisch Verdr{\"a}ngtes und {\"U}bersehenes, planm{\"a}ßig Vergessenes sichtbar machen - nach dem Krieg ist vor dem Krieg. {\"A}sthetik in ihrer sozial-, geschichts- und kulturwissenschaftlichen Relevanz. Im post- und kontrafaktischen Zeitalter des allgegenw{\"a}rtigen medialen {\"U}berflusses, inmitten der Fernseh-, YouTube- und virtuellen Realit{\"a}t, erf{\"u}llen, begr{\"u}nden, erm{\"o}glichen oder schlichtweg erk{\"a}mpfen die Filme und ihre Autoren verloren gegangene R{\"a}ume f{\"u}r Widerspr{\"u}che, Fragen, die mal in ihrer Ambivalenz, mal in ihrer spr{\"o}den Eindeutigkeit ihren Aussagewert haben. Wider die marginale Rezeption r{\"u}ckt die Publikation sie in den Raum der interdisziplin{\"a}ren wissenschaftlichen Forschung und stellt sie als gleichwertige Formen der Wissens- und Erfahrungsproduktion vor. Bei all ihrer Unterschiedlichkeit, katapultieren die Filme den Zuschauer in ebenjene bekannte, aber nicht erkannte, weil nicht gesehene, {\"u}bersehene, nicht wahrgenommene Hyperrealit{\"a}t ihrer Alltagswirklichkeit. Weder der Autor noch das Werk noch der Zuschauer sind aus dem jeweiligen historischen oder soziopolitischen Diktum herausl{\"o}sbar oder gar g{\"a}nzlich frei.}, subject = {Dokumentarfilm}, language = {de} } @book{Bennke, author = {Bennke, Johannes}, title = {Obliteration. F{\"u}r eine partikulare Medienphilosophie nach Emmanuel Levinas}, publisher = {transcript}, address = {Bielefeld}, isbn = {978-3-8376-6791-2}, doi = {10.14361/9783839467916}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231207-65009}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {420}, abstract = {Es gibt keine Kreativit{\"a}t ohne Obliteration - also ohne {\"U}berschreiben und Entwerten oder Vergessen und Vernichten. Johannes Bennke setzt erstmals die Obliteration ins Zentrum der Medienphilosophie und deckt im Anschluss an Emmanuel Levinas in ihr etwas bildlich Negatives auf. Als Differenzfigur erlangt die Obliteration gestalterische Sprengkraft sowie ethische und epistemologische Relevanz. {\"U}ber Bildkonjunktionen als genuine Methode der Bildwissenschaft entsteht so eine Theorie der Kunst und eine Philosophie des Medialen nach Levinas, die sedimentierte Wissensformen ersch{\"u}ttert und im Zeichen eines Lebens mit Anderen erneuert.}, subject = {Bildwissenschaft}, language = {de} } @incollection{SimonRitz, author = {Simon-Ritz, Frank}, title = {Der Bibliothek eine Stimme geben: Die Integration von Lobby-Arbeit in den beruflichen Alltag}, series = {Praxishandbuch Wissenschaftliche Bibliothekar:innen}, booktitle = {Praxishandbuch Wissenschaftliche Bibliothekar:innen}, publisher = {De Gruyter}, address = {Berlin}, doi = {10.1515/9783110790375-042}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20231102-64826}, pages = {395 -- 401}, abstract = {Dass Lobby-Arbeit auch f{\"u}r Bibliotheken und damit auch f{\"u}r Bibliothekar:innen unverzichtbar ist, hat sich als Erkenntnis mittlerweile durchgesetzt. Im Folgenden soll - ausgehend von einer kurzen Betrachtung des Stellenwerts der Lobbyarbeit in der bibliothekarischen Verbandsarbeit - aufgezeigt werden, welche Rolle Lobbyaktivit{\"a}ten im bibliothekarischen Alltag spielen k{\"o}nnten bzw. sollten.}, subject = {Bibliothek}, language = {de} } @unpublished{EngelmannSchwendnerSeim, author = {Engelmann, Iris and Schwendner, Sascha and Seim, Werner}, title = {Materialsparende Nagelbinder - Aspekte der Konstruktionsgeschichte von 1930 bis 1990}, doi = {10.25643/bauhaus-universitaet.4888}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230112-48882}, pages = {33}, abstract = {Materialsparende Holzkonstruktionen, die insbesondere w{\"a}hrend der Kriegs- und Nachkriegszeit im 20. Jahrhundert entwickelt und optimiert wurden, erlangen aktuell aus konstruktionshistorischer Sicht, aber auch aus {\"o}konomischer Sicht erneut Interesse. Der vorliegende Beitrag gibt einen {\"U}berblick angefangen von den ersten Konstruktionen Ende der 1920er Jahre bis hin zu Typenbindern der DDR, die noch bis 1990 {\"u}ber Landwirtschaftsbauten errichtet wurden und heute oft als Tragkonstruktionen f{\"u}r Photovoltaikanlagen weiterverwendet werden. Der Fokus liegt auf der chronologischen Vorstellung ausgew{\"a}hlter Konstruktionsweisen f{\"u}r Hallen- und Hausd{\"a}cher unterschieden nach Fachwerk- und Vollwandbindern. Sowohl die verantwortlichen Ingenieure und deren Herkunft, sowie wesentliche Anwendungsfelder und Beispielbauten kommen in der {\"U}berblicksdarstellung zur Sprache. Eine wesentliche Erkenntnis ist die im Betrachtungszeitraum 1930 bis 1990 zu verzeichnende Reduzierung einer Vielzahl genagelter Spar- hin zu Typenkonstruktionen, die im wesentlichen {\"a}ußerst materialeffiziente Fachwerkbinder f{\"u}r Satteld{\"a}cher hervorbrachte.}, subject = {Ingenieurholzbau}, language = {de} } @unpublished{FischerSchwendnerSeimetal., author = {Fischer, Jens and Schwendner, Sascha and Seim, Werner and Engelmann, Iris}, title = {Verbindungen mit N{\"a}geln im Holzbau - Die Erforschung und Entwicklung von Konstruktionsregeln}, doi = {10.25643/bauhaus-universitaet.4889}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230112-48893}, pages = {25}, abstract = {Der Nagel als tragendes Holzverbindungsmittel ist heute gut bekannt. Doch noch vor 100 Jahren war das anders: sein statisch konstruktiver Gebrauch war verboten. Das {\"a}nderte sich mit Beginn dessen Erforschung Ende der 1920er Jahre. Seit 1933 ist der Nagel Bestandteil der deutschen Regelwerke und findet seitdem breite Verwendung. {\"U}ber weite Teile des 20. Jahrhunderts diente er in Not- und Sparkonstruktionen wie Brett- und Bohlenbindern als hocheffizientes Verbindungsmittel der Wahl. Diese materialsparenden Tragwerke waren bei der periodisch im-mer wiederkehrenden Ressourcenknappheit sehr gefragt und sind ein wichtiger Bestandteil der Konstruktionsgeschichte des Holzbaus. In dem folgenden Beitrag wird die Erforschung des Na-geltragverhaltens und die einhergehende fortlaufende Normierung behandelt. Die Errungen-schaften einzelner Forschungsvorhaben werden vorgestellt. Anhand eines Zeitstrahls werden Zusammenh{\"a}nge zwischen Forschung und Normung gezeigt. Tabellen und Grafiken verdeutli-chen die {\"A}nderungen innerhalb der Normen von der ersten DIN 1052 im Jahr 1933 {\"u}ber die erste eigenst{\"a}ndige Holzbaunorm in der DDR, der TGL 112-0730, aus 1963 bis zur DIN 1052- 1988. Dabei wird immer Bezug zum derzeitigen Entwurf des Eurocode 5 genommen. Allgemein zeigt sich, dass ein Großteil der heutigen Kenntnisse immer noch auf die Grundlagenforschung der 1930er Jahre zur{\"u}ckgeht.}, subject = {Ingenieurholzbau}, language = {de} } @unpublished{SchwendnerFischerSeimetal., author = {Schwendner, Sascha and Fischer, Jens and Seim, Werner and Engelmann, Iris}, title = {N{\"a}gel im Holzbau - Die Erforschung des Trag- und Verformungsverhaltens}, doi = {10.25643/bauhaus-universitaet.4890}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230112-48904}, pages = {18}, abstract = {Die Tragf{\"a}higkeit von N{\"a}geln und Nagelverbindungen im Holzbau war lange Zeit ausschließlich {\"u}ber Tabellen, die auf experimentellen Untersuchungen basierten, geregelt. In den letzten 100 Jahren untersuchten unterschiedliche Forscher das Last-Verformungsverhalten dieser Verbindungen und entwickelten Modelle, mit denen auf Grundlage von analytischen Gleichungen die Tragf{\"a}higkeit und das Verformungsverhalten von N{\"a}geln berechnet werden kann. Die zun{\"a}chst in Not- und Sparkonstruktion eingesetzten N{\"a}gel werden heutzutage vor allem bei Tafelelementen verwendet. Im Bestand finden sich aber auch zahlreiche, teils weit gespannte Fachwerkkonstruktionen. In dem folgenden Beitrag werden die Erforschung und Entwicklung der Tragf{\"a}higkeit sowie des Verformungsverhaltens von genagelten Verbindungen detailliert und strukturiert erl{\"a}utert. Die zugeh{\"o}rigen Meilensteine werden genauer betrachtet. {\"U}ber unterschiedliche Methoden f{\"u}r die Bestimmung der Tragf{\"a}higkeit sowie mechanische Ph{\"a}nomene, die erst nach und nach entdeckt wurden, k{\"o}nnen in der aktuellen Normung sehr individuelle Verbindungen nachgewiesen und deren Verhalten beschrieben werden. Tabellen und Grafiken verdeutlichen die einzelnen Meilensteine der geschichtlichen Entwicklung und vergleichen konkret die normativen Regelungen seit Beginn der Einf{\"u}hrung des Nagels in den Ingenieurholzbau in Deutschland. Hierbei kann gezeigt werden, dass einige Definitionen seit 1933 bis heute noch ihre G{\"u}ltigkeit behalten.}, subject = {Ingenieurholzbau}, language = {de} } @misc{EckardtAlSadaty, author = {Eckardt, Frank and AlSadaty, Aliaa}, title = {Urban Heritage in Transformation: Physical and Non-Physical Dimensions of Changing Contexts}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No. 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6633}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63850}, pages = {4}, abstract = {Urban heritage is at the core of the process of many changes observable in the cities today. The pace of urban change in heritage contexts, however, differs widely across the globe. In some areas, it goes slowly, in others it is astonishingly rapid. In some cases, change is coupled with risks of erosion of heritage and urban areas of value and in others change is synonymous with prosperity and positive impacts. Change in urban heritage areas is not only confined to the physical and tangible aspects, but needs to be regarded as mirroring changes related socio-political practices, economic implications, and cultural impacts. In this regard, the present thematic issue looks at various patterns of the interrelationship between heritage and urban change from both the physical and the non-physical perspectives. This editorial presents the topic of urban heritage and patterns of physical and non-physical transformation in urban heritage contexts and introduces the thematic issue "Urban Heritage and Patterns of Change: Spatial Practices of Physical and Non-Physical Transformation."}, subject = {Stadt}, language = {en} } @phdthesis{Danckwerth, author = {Danckwerth, Julia}, title = {Strategien der Sichtbarkeit und Sichtbarmachung von ‚Wearable Enhancement' im Bereich Smart Health}, doi = {10.25643/bauhaus-universitaet.4576}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220202-45768}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Die vorliegende Forschungsarbeit befasst sich mit der Entwicklung und Gestaltung von k{\"o}rpernahen, tragbaren Artefakten f{\"u}r den digitalisierten Gesundheitsbereich. Unter dem entwickelten Begriff des Wearable Enhancements werden die verschiedenen Termini aus smarten Textilien, Fashion Technologies, Wearable Technologies sowie elektronischen Textilien zusammengefasst und zwei zentrale Forschungsfragen untersucht. Wie kann Wearable Enhancement im Bereich Smart Health ethisch, sozial und ökologisch entwickelt und gestaltet werden? Inwiefern können textile Schnittstellen die Wahrnehmung und die Wahrnehmbarkeit des Körpers verändern? Mit der ersten Forschungsfrage sollen vorrangig Ansätze und Strategien der Sichtbarkeit f{\"u}r die Entwicklung und Gestaltung diskutiert werden, welche Aussagen f{\"u}r die Designpraxis, den Gestaltungs- und Designforschungsprozess sowie die Designlösungen selbst generieren sollen. Die zweite Forschungsfrage zielt darauf, Formen der Sichtbarmachung von sowie f{\"u}r Wearable Enhancement zu untersuchen. Anhand von drei konkreten Fallstudien werden wesentliche Aspekte der Rezeption, Perzeption, Konstruktion, Konfiguration und Konzeption von soziotechnischen Artefakten zur Funktionssteigerung des menschlichen K{\"o}rpers untersucht und verschiedene Formen der Sichtbarkeit und Sichtbarmachung entwickelt. In der Arbeit wird ein dual-angelegter transdisziplin{\"a}rer Designforschungsansatz entwickelt und praktiziert, welcher sowohl die menschlichen Bed{\"u}rfnisse der Nutzer*innen als auch die Weiterentwicklung von Technologien ber{\"u}cksichtigt. Auf dieser Grundlage wird versucht Anregungen f{\"u}r ein zukunftsf{\"a}higes und zugleich verantwortungsorientiertes Design zu geben.}, subject = {Design}, language = {de} } @misc{PachecoAlvim, type = {Master Thesis}, author = {Pacheco Alvim, Sarah}, title = {Falsa Seringueira: Rubber Trees and the Materiality of the Unseen}, doi = {10.25643/bauhaus-universitaet.4846}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230105-48467}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {128}, abstract = {The theme of this project is the colonial history of the natural rubber industry. It focuses on two species of tropical plants: Ficus elastica and Hevea brasiliensis. Geographically their native habitat is very distant from each other, but they connect by European influence through the exploitation of latex. The many forms and outcomes from this work manifest the attempt of the artist to create an association between a common household plant, the origin of its name, and the source of rubber. As a ghostly connective tissue, the latex surrounds reconstructed history, old prints, live plants, and drawings, accepting the material's capacity to both erase and preserve the past.}, subject = {Kautschuk}, language = {en} } @phdthesis{LopezZermeno, author = {L{\´o}pez Zerme{\~n}o, Jorge Alberto}, title = {Isogeometric and CAD-based methods for shape and topology optimization: Sensitivity analysis, B{\´e}zier elements and phase-field approaches}, doi = {10.25643/bauhaus-universitaet.4710}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220831-47102}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The Finite Element Method (FEM) is widely used in engineering for solving Partial Differential Equations (PDEs) over complex geometries. To this end, it is required to provide the FEM software with a geometric model that is typically constructed in a Computer-Aided Design (CAD) software. However, FEM and CAD use different approaches for the mathematical description of the geometry. Thus, it is required to generate a mesh, which is suitable for FEM, based on the CAD model. Nonetheless, this procedure is not a trivial task and it can be time consuming. This issue becomes more significant for solving shape and topology optimization problems, which consist in evolving the geometry iteratively. Therefore, the computational cost associated to the mesh generation process is increased exponentially for this type of applications. The main goal of this work is to investigate the integration of CAD and CAE in shape and topology optimization. To this end, numerical tools that close the gap between design and analysis are presented. The specific objectives of this work are listed below: • Automatize the sensitivity analysis in an isogeometric framework for applications in shape optimization. Applications for linear elasticity are considered. • A methodology is developed for providing a direct link between the CAD model and the analysis mesh. In consequence, the sensitivity analysis can be performed in terms of the design variables located in the design model. • The last objective is to develop an isogeometric method for shape and topological optimization. This method should take advantage of using Non-Uniform Rational B-Splines (NURBS) with higher continuity as basis functions. Isogeometric Analysis (IGA) is a framework designed to integrate the design and analysis in engineering problems. The fundamental idea of IGA is to use the same basis functions for modeling the geometry, usually NURBS, for the approximation of the solution fields. The advantage of integrating design and analysis is two-fold. First, the analysis stage is more accurate since the system of PDEs is not solved using an approximated geometry, but the exact CAD model. Moreover, providing a direct link between the design and analysis discretizations makes possible the implementation of efficient sensitivity analysis methods. Second, the computational time is significantly reduced because the mesh generation process can be avoided. Sensitivity analysis is essential for solving optimization problems when gradient-based optimization algorithms are employed. Automatic differentiation can compute exact gradients, automatically by tracking the algebraic operations performed on the design variables. For the automation of the sensitivity analysis, an isogeometric framework is used. Here, the analysis mesh is obtained after carrying out successive refinements, while retaining the coarse geometry for the domain design. An automatic differentiation (AD) toolbox is used to perform the sensitivity analysis. The AD toolbox takes the code for computing the objective and constraint functions as input. Then, using a source code transformation approach, it outputs a code for computing the objective and constraint functions, and their sensitivities as well. The sensitivities obtained from the sensitivity propagation method are compared with analytical sensitivities, which are computed using a full isogeometric approach. The computational efficiency of AD is comparable to that of analytical sensitivities. However, the memory requirements are larger for AD. Therefore, AD is preferable if the memory requirements are satisfied. Automatic sensitivity analysis demonstrates its practicality since it simplifies the work of engineers and designers. Complex geometries with sharp edges and/or holes cannot easily be described with NURBS. One solution is the use of unstructured meshes. Simplex-elements (triangles and tetrahedra for two and three dimensions respectively) are particularly useful since they can automatically parameterize a wide variety of domains. In this regard, unstructured B{\´e}zier elements, commonly used in CAD, can be employed for the exact modelling of CAD boundary representations. In two dimensions, the domain enclosed by NURBS curves is parameterized with B{\´e}zier triangles. To describe exactly the boundary of a two-dimensional CAD model, the continuity of a NURBS boundary representation is reduced to C^0. Then, the control points are used to generate a triangulation such that the boundary of the domain is identical to the initial CAD boundary representation. Thus, a direct link between the design and analysis discretizations is provided and the sensitivities can be propagated to the design domain. In three dimensions, the initial CAD boundary representation is given as a collection of NURBS surfaces that enclose a volume. Using a mesh generator (Gmsh), a tetrahedral mesh is obtained. The original surface is reconstructed by modifying the location of the control points of the tetrahedral mesh using B{\´e}zier tetrahedral elements and a point inversion algorithm. This method offers the possibility of computing the sensitivity analysis using the analysis mesh. Then, the sensitivities can be propagated into the design discretization. To reuse the mesh originally generated, a moving B{\´e}zier tetrahedral mesh approach was implemented. A gradient-based optimization algorithm is employed together with a sensitivity propagation procedure for the shape optimization cases. The proposed shape optimization approaches are used to solve some standard benchmark problems in structural mechanics. The results obtained show that the proposed approach can compute accurate gradients and evolve the geometry towards optimal solutions. In three dimensions, the moving mesh approach results in faster convergence in terms of computational time and avoids remeshing at each optimization step. For considering topological changes in a CAD-based framework, an isogeometric phase-field based shape and topology optimization is developed. In this case, the diffuse interface of a phase-field variable over a design domain implicitly describes the boundaries of the geometry. The design variables are the local values of the phase-field variable. The descent direction to minimize the objective function is found by using the sensitivities of the objective function with respect to the design variables. The evolution of the phase-field is determined by solving the time dependent Allen-Cahn equation. Especially for topology optimization problems that require C^1 continuity, such as for flexoelectric structures, the isogeometric phase field method is of great advantage. NURBS can achieve the desired continuity more efficiently than the traditional employed functions. The robustness of the method is demonstrated when applied to different geometries, boundary conditions, and material configurations. The applications illustrate that compared to piezoelectricity, the electrical performance of flexoelectric microbeams is larger under bending. In contrast, the electrical power for a structure under compression becomes larger with piezoelectricity.}, subject = {CAD}, language = {en} } @phdthesis{Mojahedin, author = {Mojahedin, Arvin}, title = {Analysis of Functionally Graded Porous Materials Using Deep Energy Method and Analytical Solution}, doi = {10.25643/bauhaus-universitaet.4867}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20221220-48674}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Porous materials are an emerging branch of engineering materials that are composed of two elements: One element is a solid (matrix), and the other element is either liquid or gas. Pores can be distributed within the solid matrix of porous materials with different shapes and sizes. In addition, porous materials are lightweight, and flexible, and have higher resistance to crack propagation and specific thermal, mechanical, and magnetic properties. These properties are necessary for manufacturing engineering structures such as beams and other engineering structures. These materials are widely used in solid mechanics and are considered a good replacement for classical materials by many researchers recently. Producing lightweight materials has been developed because of the possibility of exploiting the properties of these materials. Various types of porous material are generated naturally or artificially for a specific application such as bones and foams. Like functionally graded materials, pore distribution patterns can be uniform or non-uniform. Biot's theory is a well-developed theory to study the behavior of poroelastic materials which investigates the interaction between fluid and solid phases of a fluid-saturated porous medium. Functionally graded porous materials (FGPM) are widely used in modern industries, such as aerospace, automotive, and biomechanics. These advanced materials have some specific properties compared to materials with a classic structure. They are extremely light, while they have specific strength in mechanical and high-temperature environments. FGPMs are characterized by a gradual variation of material parameters over the volume. Although these materials can be made naturally, it is possible to design and manufacture them for a specific application. Therefore, many studies have been done to analyze the mechanical and thermal properties of FGPM structures, especially beams. Biot was the pioneer in formulating the linear elasticity and thermoelasticity equations of porous material. Since then, Biot's formulation has been developed in continuum mechanics which is named poroelasticity. There are obstacles to analyzing the behavior of these materials accurately like the shape of the pores, the distribution of pores in the material, and the behavior of the fluid (or gas) that saturated pores. Indeed, most of the engineering structures made of FGPM have nonlinear governing equations. Therefore, it is difficult to study engineering structures by solving these complicated equations. The main purpose of this dissertation is to analyze porous materials in engineering structures. For this purpose, the complex equations of porous materials have been simplified and applied to engineering problems so that the effect of all parameters of porous materials on the behavior of engineering structure has been investigated. The effect of important parameters of porous materials on beam behavior including pores compressibility, porosity distribution, thermal expansion of fluid within pores, the interaction of stresses between pores and material matrix due to temperature increase, effects of pore size, material thickness, and saturated pores with fluid and unsaturated conditions are investigated. Two methods, the deep energy method, and the exact solution have been used to reduce the problem hypotheses, increase accuracy, increase processing speed, and apply these in engineering structures. In both methods, they are analyzed nonlinear and complex equations of porous materials. To increase the accuracy of analysis and study of the effect of shear forces, Timoshenko and Reddy's beam theories have been used. Also, neural networks such as residual and fully connected networks are designed to have high accuracy and less processing time than other computational methods.}, subject = {Por{\"o}ser Stoff}, language = {en} } @article{HahlbrockBraunHeideletal., author = {Hahlbrock, David and Braun, Michael and Heidel, Robin and Lemmen, Patrik and Boumann, Roland and Bruckmann, Tobias and Schramm, Dieter and Helm, Volker and Willmann, Jan}, title = {Cable Robotic 3D-printing: additive manufacturing on the construction site}, series = {Construction Robotics}, volume = {2022}, journal = {Construction Robotics}, publisher = {Springer International Publishing}, address = {Cham}, doi = {10.1007/s41693-022-00082-3}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230124-48791}, pages = {1 -- 14}, abstract = {This paper outlines an important step in characterizing a novel field of robotic construction research where a cable-driven parallel robot is used to extrude cementitious material in three-dimensional space, and thus offering a comprehensive new approach to computational design and construction, and to robotic fabrication at larger scales. Developed by the Faculty of Art and Design at Bauhaus-University Weimar (Germany), the faculty of Architecture at the University of Applied Sciences Dortmund (Germany) and the Chair of Mechatronics at the University of Duisburg-Essen (Germany), this approach offers unique advantages over existing additive manufacturing methods: the system is easily transportable and scalable, it does not require additional formwork or scaffolding, and it offers digital integration and informational oversight across the entire design and building process. This paper considers 1) key research components of cable robotic 3D-printing (such as computational design, material exploration, and robotic control), and 2) the integration of these parameters into a unified design and building process. The demonstration of the approach at full-scale is of particular concern.}, subject = {Robotik}, language = {en} } @article{Coenen, author = {Coenen, Ekkehard}, title = {Communicative Action, Objectifications, and the Triad of Violence}, series = {Human Studies}, volume = {2022}, journal = {Human Studies}, number = {45 (2022)}, publisher = {Springer Science + Business Media B.V}, address = {Dordrecht}, doi = {10.1007/s10746-022-09639-1}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230124-48828}, pages = {447 -- 468}, abstract = {This article aims to develop a social theory of violence that emphasizes the role of the third party as well as the communication between the involved subjects. For this Teresa Koloma Beck's essay 'The Eye of the Beholder: Violence as a Social Process' is taken as a starting point, which adopts a social-constructivist perspective. On the one hand, the basic concepts and the benefits of this approach are presented. On the other hand, social-theoretical problems of this approach are revealed. These deficits are counteracted by expanding Koloma Beck's approach with a communicative-constructivist framework. Thus, the role of communicative action and the 'objectification of violence' is emphasized. These aspects impact the perception, judgement and (de-)legitimation of violence phenomena and the emergence of a 'knowledge of violence'. Communicative actions and objectifications form a key to understanding violent interactions and the link between the micro and macro levels. Finally, the methodological consequences for the research of violence and Communicative Constructivism are discussed. Furthermore, possible research fields are outlined, which open up by looking at communicative action and the objectifications within the 'triads of violence'.}, subject = {Gewalt}, language = {en} } @article{Stadler, author = {Stadler, Max}, title = {Gr{\"u}nderzeit. Hightech und Alternativen der Wissenschaft in West-Berlin}, series = {NTM Zeitschrift f{\"u}r Geschichte der Wissenschaften, Technik und Medizin}, volume = {2022}, journal = {NTM Zeitschrift f{\"u}r Geschichte der Wissenschaften, Technik und Medizin}, number = {30 (2022)}, publisher = {Basel}, address = {Birkh{\"a}user}, doi = {10.1007/s00048-022-00352-9}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230124-48800}, pages = {599 -- 632}, abstract = {Zu den diversen Unternehmungen sozialbewegter „Gegenwissenschaft", die um 1980 auf der Bildfl{\"a}che der BRD erschienen, z{\"a}hlte der 1982 gegr{\"u}ndete Berliner Wissenschaftsladen e. V., kurz WILAB - eine Art „alternatives" Spin-off der Technischen Universit{\"a}t Berlin. Der vorliegende Beitrag situiert die Ausgr{\"u}ndung des „Ladens" im Kontext zeitgen{\"o}ssischer Fortschritte der (regionalen) Forschungs- und Technologiepolitik. Gezeigt wird, wie der deindustrialisierenden Inselstadt, qua „innovationspolitischer" Gegensteuerung, dabei sogar eine gewisse Vorreiterrolle zukam: {\"u}ber die Stadtgrenzen hinaus sichtbare Neuerungen wie die Gr{\"u}ndermesse BIG TECH oder das 1983 er{\"o}ffnete Berliner Innovations- und Gr{\"u}nderzentrum (BIG), der erste „Incubator" [sic] der BRD, etwa gingen auf das Konto der 1977/78 lancierten Technologie-Transferstelle der TU Berlin, TU-transfer. Anders gesagt: tendenziell bekam man es hier nun mit Verh{\"a}ltnissen zu tun, die immer weniger mit den Tr{\"a}umen einer „kritischen", nicht-fremdbestimmten (Gegen‑)Wissenschaft kompatibel waren. Latent kontr{\"a}r zur historiographischen Prominenz des wissenschaftskritischen Zeitgeists fristeten „alternativen" Zielsetzungen verpflichtete Unternehmungen wie „WILAB" ein relativ marginalisiertes Nischendasein. Dennoch wirft das am WILAB verfolgte, so gesehen wenig aussichtsreiche Anliegen, eine andere, n{\"a}mlich „humanere" Informationstechnologie in die Wege zu leiten, ein instruktives Licht auf die Aufbr{\"u}che „unternehmerischer" Wissenschaft in der BRD um 1980.}, subject = {Berlin }, language = {de} } @inproceedings{Dokhanchi, author = {Dokhanchi, Najmeh Sadat}, title = {Acoustic travel time tomography: Applicability of an array of directional sound sources}, editor = {Arnold, J{\"o}rg}, doi = {10.25643/bauhaus-universitaet.4658}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220622-46589}, abstract = {The technique of Acoustic travel-time TOMography (ATOM) allows for measuring the distribution of air temperatures throughout the entire room based on the determined sound-travel-times of early reflections, currently up to second order reflections. The number of detected early reflections in the room impulse response (RIR) which stands for the desired sound paths inside the room, has a significant impact on the resolution of reconstructed temperatures. This study investigates the possibility of utilizing an array of directional sound sources for ATOM measurements instead of a single omnidirectional loudspeaker used in the previous studies [1-3]. The developed measurement setup consists of two directional sound sources placed near the edge of the floor in the climate chamber of the Bauhaus-University Weimar and one omnidirectional receiver at center of the room near the ceiling. In order to compensate for the reduced number of sound paths when using directional sound sources, it is proposed to take high-energy early reflections up to third order into account. For this purpose, the simulated travel times up to third-order image sources were implemented in the image source model (ISM) algorithm, by which these early reflections can be detected effectively for air temperature reconstructions. To minimize the uncertainties of travel-times estimation due to the positioning of the sound transducers inside the room, measurements were conducted to determine the exact emitting point of the utilized sound source i.e. its acoustic center (AC). For these measurements, three types of excitation signals (MLS, linear and logarithmic chirp signals) with various frequency ranges were used considering that the acoustic center of a sound source is a frequency dependent parameter [4]. Furthermore, measurements were conducted to determine an optimum excitation signal based on the given condition of the ATOM measurement set-up which defines an optimum method for the RIR estimation correspondingly. Finally, the uncertainty of the measuring system utilizing an array of directional sound sources was analyzed.}, subject = {Bauphysik}, language = {en} } @phdthesis{Arganaraz, author = {Arga{\~n}araz, Cecilia Magdalena}, title = {Tiempos imaginados y espacios {\´a}ridos: controversias en torno al agua en el Valle de Catamarca (siglos XIX-XX)}, doi = {10.25643/bauhaus-universitaet.4681}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220803-46817}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it. The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime - in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion. These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history.}, subject = {Anthologie}, language = {es} } @misc{Miller, type = {Master Thesis}, author = {Miller, Martin}, title = {BIM-basierte Digitalisierung von Bestandsgeb{\"a}uden aus Sicht des FM am Beispiel von Heizungsanlagen}, doi = {10.25643/bauhaus-universitaet.4661}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220623-46616}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {101}, abstract = {Das Ziel der Arbeit ist, f{\"u}r das Facility Management relevante Informationen f{\"u}r die mit Building Information Modeling basierende Erstellung von Bestandsgeb{\"a}uden am Beispiel einer Hei- zungsanlage zu definieren. Darauf basierend sind die notwendigen Arbeitsschritte der Objek- taufnahme abgeleitet. F{\"u}r die Definition der Arbeitsschritte wurden das grundlegende Vorge- hen bei einer Objektaufnahme sowie die gesetzlichen Gegebenheiten f{\"u}r den Betrieb einer Heizungsanlage dargelegt. Dar{\"u}ber hinaus sind in der vorliegenden Ausarbeitung die Vorteile und Herausforderungen hinsichtlich des Zusammenspiels von Building Information Modeling und Facility Management analysiert. Die definierten Arbeitsschritte sind anhand eines Beispiel- projektes angewendet worden. Im Rahmen des Beispielprojekts sind die entscheidenden Be- triebsdaten je Anlagenteil in Form von Informationsanforderungen nach DIN 17412 definiert. Das Geb{\"a}udemodell ist durch Parameter mit den f{\"u}r das Facility Management relevanten In- formationen erg{\"a}nzt. Die Resultate des Beispielprojektes sind mit aussagekr{\"a}ftigen Schnitten, Pl{\"a}nen sowie 3-D-Visualisierungen dargestellt. Abschließend sind die Ergebnisse in Bezug auf das FM validiert. Aus den Arbeitsschritten und Ergebnissen ist eine Leitlinie erstellt worden f{\"u}r den Digitalisierungsprozess von Bestandsgeb{\"a}uden f{\"u}r das Facility Management.}, subject = {Facility Management}, language = {de} } @phdthesis{Drescher, author = {Drescher, Marcel}, title = {Open Innovation in KMU - Eine empirische Analyse der offenen Innovationsaktivit{\"a}ten im Kontext der Entrepreneurial Orientation}, doi = {10.25643/bauhaus-universitaet.4946}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230314-49463}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {211}, abstract = {Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivit{\"a}ten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erkl{\"a}ren, warum sich die {\"O}ffnung von Innovationsprozessen in KMU unterscheidet. Daf{\"u}r wurde auf eine multiple Fallstudienanalyse zur{\"u}ckgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesl{\"a}ndern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Ber{\"u}cksichtigung von formenden Innovationsaktivit{\"a}ten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gr{\"u}nden f{\"u}r und gegen Open Innovation vermitteln ein {\"u}ber den bisherigen Forschungsstand hinausgehendes Verst{\"a}ndnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erkl{\"a}rt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen f{\"u}r die Unternehmenspraxis.}, subject = {Open Innovation}, language = {de} } @inproceedings{KieselEngelsVoelker, author = {Kiesel, Gerd and Engels, Merit and V{\"o}lker, Conrad}, title = {Energetische Transformation im l{\"a}ndlichen Raum - Aufbau eines prozessorientierten Entwicklungs- und Moderationsmodells}, series = {Schriftenreihe des Fachgebiets Bauphysik/Energetische Geb{\"a}udeoptimierung}, booktitle = {Schriftenreihe des Fachgebiets Bauphysik/Energetische Geb{\"a}udeoptimierung}, editor = {Kornadt, Oliver and Carrigan, Svenja and Hofmann, Markus and V{\"o}lker, Conrad}, publisher = {Eigenverlag Technische Universit{\"a}t Kaiserslautern}, address = {Kaiserslautern}, isbn = {978-3-95974-176-7}, issn = {2363-8206}, doi = {10.25643/bauhaus-universitaet.4656}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220617-46566}, pages = {3}, abstract = {Kleine Kommunen im l{\"a}ndlichen Raum sind aufgrund ihrer oft eingeschr{\"a}nkten personellen und finanziellen Kapazit{\"a}ten bisher eher sporadisch in den Themenfeldern Energieeffizienz und Erneuerbare Energien aktiv. Immer wieder stellt sich daher Frage, wie die Klimaschutzstrategien des Bundes und der L{\"a}nder dort mit dem verf{\"u}gbaren Personal kosteng{\"u}nstig realisierbar sind. Vor diesem Hintergrund wird ein Werkzeug entwickelt, mit dessen Hilfe der aktive Einstieg in diese Thematik mit geringen Aufwand und {\"u}berwiegend barrierefrei m{\"o}glich ist. Der Aufbau eines prozessorientierten Entwicklungs- und Moderationsmodells zur Erprobung und Umsetzung bezahlbarer Handlungsoptionen f{\"u}r Energieeinsparungen und effizienten Energieeinsatz im {\"u}berwiegend l{\"a}ndlichen gepr{\"a}gten Raum ist der Schwerpunkt der Softwarel{\"o}sung. Kommunen werden mit deren Hilfe in die Lage versetzt, in die notwendigen Prozesse der Energie- und W{\"a}rmewende einzusteigen. Dabei soll der modulare Aufbau die regul{\"a}ren Schritte notwendiger (integrierter) Planungsprozesse nicht vollst{\"a}ndig ersetzen. Vielmehr k{\"o}nnen innerhalb der Online-Anwendung - {\"u}berwiegend automatisiert - konkrete Maßnahmenvorschl{\"a}ge erstellt werden, die ein solides Fundament der k{\"u}nftigen energetischen Entwicklung der Kommunen darstellen. F{\"u}r eine gezielte Validierung der Ergebnisse und der Ableitung potentieller Maßnahmen werden f{\"u}r die Erprobung Modellkommunen in Th{\"u}ringen, Bayern und Hessen als Reallabore einbezogen. Das Tool steht bisher zun{\"a}chst nur den beteiligten Modellkommunen zur Verf{\"u}gung. Die entwickelte Softwarel{\"o}sung soll k{\"u}nftig Schritt f{\"u}r Schritt allen interessierten Kommunen mit diversen Hilfsmitteln und einer Vielzahl anderer praktischer Bestandteile zur Verf{\"u}gung gestellt werden.}, subject = {Modellierung}, language = {de} } @article{ArtusKoch, author = {Artus, Mathias and Koch, Christian}, title = {Object-Oriented Damage Information Modeling Concepts and Implementation for Bridge Inspection}, series = {Journal of Computing in Civil Engineering}, volume = {2022}, journal = {Journal of Computing in Civil Engineering}, number = {Volume 36, issue 6}, doi = {10.1061/(ASCE)CP.1943-5487.0001030}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220826-47087}, pages = {1 -- 21}, abstract = {Bridges are designed to last for more than 50 years and consume up to 50\% of their life-cycle costs during their operation phase. Several inspections and assessment actions are executed during this period. Bridge and damage information must be gathered, digitized, and exchanged between different stakeholders. Currently, the inspection and assessment practices rely on paper-based data collection and exchange, which is time-consuming and error-prone, and leads to loss of information. Storing and exchanging damage and building information in a digital format may lower costs and errors during inspection and assessment and support future needs, for example, immediate simulations regarding performance assessment, automated maintenance planning, and mixed reality inspections. This study focused on the concept for modeling damage information to support bridge reviews and structural analysis. Starting from the definition of multiple use cases and related requirements, the data model for damage information is defined independently from the subsequent implementation. In the next step, the implementation via an established standard is explained. Functional tests aim to identify problems in the concept and implementation. To show the capability of the final model, two example use cases are illustrated: the inspection review of the entire bridge and a finite-element analysis of a single component. Main results are the definition of necessary damage data, an object-oriented damage model, which supports multiple use cases, and the implementation of the model in a standard. Furthermore, the tests have shown that the standard is suitable to deliver damage information; however, several software programs lack proper implementation of the standard.}, subject = {Building Information Modeling}, language = {en} } @phdthesis{Riechert, author = {Riechert, Christin}, title = {Hydratation und Eigenschaften von Gips-Zement-Puzzolan-Bindemitteln mit alumosilikatischen Puzzolanen}, isbn = {978-3-00-073003-0}, doi = {10.25643/bauhaus-universitaet.4707}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220825-47076}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {148}, abstract = {Reine Calciumsulfatbindemittel weisen eine hohe L{\"o}slichkeit auf. Feuchteinwirkung f{\"u}hrt zudem zu starken Festigkeitsverlusten. Aus diesem Grund werden diese Bindemittel ausschließlich f{\"u}r Baustoffe und -produkte im Innenbereich ohne permanenten Feuchtebeanspruchung eingesetzt. Eine M{\"o}glichkeit, die Feuchtebest{\"a}ndigkeit zu erh{\"o}hen, ist die Beimischung puzzolanischer und zement{\"a}rer Komponenten. Diese Mischsysteme werden Gips-Zement-Puzzolan-Bindemittel (kurz: GZPB) genannt. Mischungen aus Calciumsulfaten und Portlandzementen allein sind aufgrund der treibenden Ettringitbildung nicht raumbest{\"a}ndig. Durch die Zugabe von puzzolanischen Stoffen k{\"o}nnen aber Bedingungen im hydratisierenden System geschaffen werden, welche eine rissfreie Erh{\"a}rtung erm{\"o}glichen. Hierf{\"u}r ist eine exakte Rezeptierung der GZPB notwendig, um die GZPB-typischen, ettringitbedingten Dehnungen zeitlich zu begrenzen. Insbesondere bei alumosilikatischen Puzzolanen treten w{\"a}hrend der Hydratation gegen{\"u}ber rein silikatischen Puzzolanen deutlich h{\"o}here Expansionen auf, wodurch die Gefahr einer potenziellen Rissbildung steigt. F{\"u}r die Erstellung geeigneter GZPB-Zusammensetzungen bedarf es daher einer Methodik, um raumbest{\"a}ndig erh{\"a}rtende Systeme sicher von destruktiven Mischungen unterscheiden zu k{\"o}nnen. Sowohl f{\"u}r die Rezeptierung als auch f{\"u}r die Anwendung der GZPB existieren in Deutschland keinerlei Normen. Dar{\"u}ber hinaus sind die Hydratationsvorg{\"a}nge sowie die entstehenden Produkte nicht konsistent beschrieben. Auch auf die Besonderheiten der GZPB mit alumosilikatischen Puzzolanen wird in der Literatur nur unzureichend eingegangen. Ziel war es daher, ein grundlegendes Verst{\"a}ndnis der Hydratation sowie eine sichere Methodik zur Rezeptierung raumbest{\"a}ndig und rissfrei erh{\"a}rtender GZPB, insbesondere in Hinblick auf die Verwendung alumosilikatischer Puzzolane, zu erarbeiten. Dar{\"u}ber hinaus sollte systematisch der Einfluss der Einzelkomponenten auf Hydratation und Eigenschaften dieser Bindemittelsysteme untersucht werden. Dies soll erm{\"o}glichen, die GZPB f{\"u}r ein breites Anwendungsspektrum als Bindemittel zu etablieren, und somit vorteilhafte Eigenschaften der Calciumsulfate (geringe Schwindneigung, geringe CO2-Emission etc.) mit der Leistungs-f{\"a}higkeit von Zementen (Wasserbest{\"a}ndigkeit, Festigkeit, Dauerhaftigkeit etc.) zu verbinden. Als Ausgangsstoffe der Untersuchungen zu den GZPB wurden Stuckgips und Alpha-Halbhydrat als Calciumsulfatbindemittel in unterschiedlichen Anteilen im GZPB verwendet. Die Puzzolan-Zement-Verh{\"a}ltnisse wurden ebenfalls variiert. Als Puzzolan kam f{\"u}r den Großteil der Untersuchungen ein alumosilikatisches Metakaolin zum Einsatz. Als kalkspendende Komponente diente ein reiner Portlandzement. Das Untersuchungsprogramm gliederte sich in 4 Teile. Zuerst wurde anhand von CaO- und pH-Wert-Messungen in Suspensionen sowie dem L{\"a}ngen{\"a}nderungsverhalten von Bindemittelleimen verschiedener Zusammensetzungen eine Vorauswahl geeigneter GZPB-Rezepturen ermittelt. Danach erfolgten, ebenfalls an Bindemittelleimen, Untersuchungen zu den Eigenschaften der als geeignet eingesch{\"a}tzten GZPB-Mischungen. Hierzu z{\"a}hlten Langzeitbetrachtungen zur rissfreien Erh{\"a}rtung bei unterschiedlichen Umgebungsbedingungen sowie die Festigkeitsentwicklung im trockenen und feuchten Zustand. Im n{\"a}chsten Schritt wurde anhand zweier exemplarischer GZPB-Zusammensetzungen (mit silikatischen und alumosilikatischen Puzzolan) die prinzipiell m{\"o}gliche Phasenzusammensetzung unter Variation des Puzzolan-Zement-Verh{\"a}ltnisses (P/Z-Verh{\"a}ltnis) und des Calciumsulfatanteils im thermodynamischen Gleichgewichtszustand berechnet. Hier wurde im Besonderen auf Unterschiede der silikatischen und alumosilikatischen Puzzolane eingegangen. Im letzten Teil der Untersuchungen wurden die Hydratationskinetik der GZPB sowie die Gef{\"u}geentwicklung n{\"a}her betrachtet. Hierf{\"u}r wurden die Porenl{\"o}sungen chemisch analysiert und S{\"a}ttigungsindizes berechnet, sowie elektronenmikropische, porosimetrische und r{\"o}ntgenografische Untersuchungen durchgef{\"u}hrt. Abschließend wurden die Ergebnisse gesamtheitlich interpretiert, da die Ergebnisse der einzelnen Untersuchungsprogramme miteinander in Wechselwirkung stehen. Als haupts{\"a}chliche Hydratationsprodukte wurden Calciumsulfat-Dihydrat, Ettringit und C-(A)-S-H-Phasen ermittelt, deren Anteile im GZPB neben dem Calciumsulfatanteil und dem Puzzolan-Zement-Verh{\"a}ltnis auch deutlich vom Wasserangebot und der Gef{\"u}geentwicklung abh{\"a}ngen. Bei Verwendung von alumosilikatischen Puzzolans kommt es wahrscheinlich zur teilweisen Substitution des Siliciums durch Aluminium in den C-S-H-Phasen. Dies erscheint aufgrund des Nachweises der f{\"u}r diese Phasen typischen, folienartigen Morphologie wahrscheinlich. Portlandit wurde in raumbest{\"a}ndigen GZPB-Systemen nur zu sehr fr{\"u}hen Zeitpunkten in geringen Mengen gefunden. In den Untersuchungen konnte ein Teil der in der Literatur beschriebenen, prinzipiellen Hydratationsabl{\"a}ufe best{\"a}tigt werden. Bei Verwendung von Halbhydrat als Calciumsulfatkomponente entsteht zuerst Dihydrat und bildet die Prim{\"a}rstruktur der GZPB. In dieses existierende Grundgef{\"u}ge kristallisieren dann das Ettringit und die C-(A)-S-H-Phasen. In den GZPB sorgen entgegen der Beschreibungen in der Literatur nicht ausschließlich die C-(A)-S-H-Phasen zur Verbesserung der Feuchtebest{\"a}ndigkeit und der Erh{\"o}hung des Festigkeitsniveaus, sondern auch das Ettringit. Beide Phasen {\"u}berwachsen im zeitlichen Verlauf der Hydratation die Dihydratkristalle in der Matrix und h{\"u}llen diese - je nach Calciumsulfatanteil im GZPB - teilweise oder vollst{\"a}ndig ein. Diese Umh{\"u}llung sowie die starke Gef{\"u}geverdichtung durch die C-(A)-S-H-Phasen und das Ettringit bedingen, dass ein l{\"o}sender Angriff durch Wasser erschwert oder gar verhindert wird. Gleichzeitig wird die Gleitf{\"a}higkeit an den Kontaktstellen der Dihydratkristalle verringert. Eine rissfreie und raumbest{\"a}ndige Erh{\"a}rtung ist f{\"u}r die gefahrlose Anwendung eines GZPB-Systems essentiell. Hierf{\"u}r ist die Kinetik der Ettringitbildung von elementarer Bedeutung. Die gebildete Ettringitmenge spielt nur eine untergeordnete Rolle. Selbst ausgepr{\"a}gte, ettringitbedingte Dehnungen und hohe sich bildende Mengen f{\"u}hren zu fr{\"u}hen Zeitpunkten, wenn die Dihydratkristalle noch leicht gegeneinander verschiebbar sind, zu keinen Sch{\"a}den. Bleibt die {\"U}bers{\"a}ttigung bez{\"u}glich Ettringit und somit auch der Kristallisationsdruck allerdings {\"u}ber einen langen Zeitraum hoch, gen{\"u}gen bereits geringe Ettringitmengen, um das sich stetig verfestigende Gef{\"u}ge stark zu sch{\"a}digen. Die f{\"u}r die raumbest{\"a}ndige Erh{\"a}rtung der GZPB notwendige, schnelle Abnahme der Ettringit{\"u}bers{\"a}ttigung wird haupts{\"a}chlich durch die Reaktivit{\"a}t des Puzzolans beeinflusst. Die puzzolanische Reaktion f{\"u}hrt zur Bindung des aus dem Zement stammenden Calciumhydroxid durch die Bildung von C-(A)-S-H-Phasen und Ettringit. Hierdurch sinkt die Calcium- und Hydroxidionenkonzentration in der Porenl{\"o}sung im Verlauf der Hydratation, wodurch auch die {\"U}bers{\"a}ttigung bez{\"u}glich Ettringit abnimmt. Je h{\"o}her die Reaktivit{\"a}t des Puzzolans ist, desto schneller sinkt der S{\"a}ttigungsindex des Ettringits und somit auch der Kristallisationsdruck. Nach Unterschreiten eines noch n{\"a}her zu kl{\"a}rendem Grenzwert der {\"U}bers{\"a}ttigung stagnieren die Dehnungen. Das Ettringit kristallisiert bzw. w{\"a}chst nun bevorzugt in den Poren ohne eine weitere, {\"a}ußere Volumenzunahme zu verursachen. Um eine schadensfreie Erh{\"a}rtung des GZPB zu gew{\"a}hrleisten, muss gerade in der fr{\"u}hen Phase der Hydratation ein ausreichendes Wasserangebot gew{\"a}hrleistet werden, so dass die Ettringitbildung m{\"o}glichst vollst{\"a}ndig ablaufen kann. Andernfalls kann es bei einer Wiederbefeuchtung zur Reaktivierung der Ettringitbildung kommen, was im eingebauten Zustand Sch{\"a}den verursachen kann. Die Gew{\"a}hrleistung eines ausreichenden Wasserangebots ist im GZPB-System nicht unproblematisch. In Abh{\"a}ngigkeit der GZPB-Zusammensetzung k{\"o}nnen sich große Ettringitmengen bilden, die einen sehr hohen Wasserbedarf aufweisen. Deshalb kann es, je nach verwendeten Wasser-Bindemittel-Wert, im Bindemittelleim zu einem Wassermangel kommen, welcher die weitere Hydratation verlangsamt bzw. komplett verhindert. Zudem k{\"o}nnen GZPB-Systeme teils sehr dichte Gef{\"u}ge ausbilden, wodurch der Wassertransport zum Reaktionsort des Ettringits zus{\"a}tzlich behindert wird. Die Konzeption raumbest{\"a}ndiger GZPB-Systeme muss anhand mehrerer aufeinander aufbauender Untersuchungen erfolgen. Zur Vorauswahl geeigneter Puzzolan-Zementverh{\"a}ltnisse eignen sich die Messungen der CaO-Konzentration und des pH-Wertes in Suspensionen. Als alleinige Beurteilungsgrundlage reicht dies allerdings nicht aus. Zus{\"a}tzlich muss das L{\"a}ngen{\"a}nderungs-verhalten beurteilt werden. Raumbest{\"a}ndige Mischungen mit alumosilikatischen Puzzolanen zeigen zu fr{\"u}hen Zeitpunkten starke Dehnungen, welche dann abrupt stagnieren. Stetige - auch geringe - Dehnungen weisen auf eine destruktive Zusammensetzung hin. Mit diesem mehrstufigen Vorgehen k{\"o}nnen raumbest{\"a}ndige, stabile GZPB-Systeme konzipiert werden, so dass die Zielstellung der Arbeit erreicht wurde und ein sicherer praktischer Einsatz dieser Bindemittelart gew{\"a}hrleistet werden kann.  }, subject = {Gips}, language = {de} } @misc{CarvalhoDaher, type = {Master Thesis}, author = {Carvalho Daher, Cesar Felipe}, title = {Horoskopos: a virtual planetarium for astrology}, doi = {10.25643/bauhaus-universitaet.4718}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220930-47181}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {104}, abstract = {This report details the development of Horoskopos, a virtual planetarium for astrology. This project was an attempt to develop a learning tool for studying astrological concepts as connected to observational astronomy. The premise that astrology and observational astronomy were once inseparable from each other in ancient times guided the conceptualization of this tool as an interactive planetarium. The main references were existing software and applications for visualization in astrology and astronomy. Professional astrology teachers were consulted in order to understand better the state of astrological teaching and learning, as well as existing tools and practice. Horoskopos was built using the Unity3D development interface, which is based on the C\# programming language. It also relied on the Swiss Ephemeris coding interface from Astrodienst. The development process was experimental and many of the needed skills were developed as needed. Usability tests were performed as new features were added to the interface. The final version of Horoskopos is fully usable, with many interactive visualization features and a defined visual identity. It was validated together with professional astrologers for its effectiveness in concept and visualization.}, subject = {Mediendesign}, language = {en} } @phdthesis{Malik, author = {Malik, Irfan}, title = {An adaptive contact formulation for Isogeometric Finite Element Analysis}, doi = {10.25643/bauhaus-universitaet.4612}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220324-46129}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {124}, abstract = {Numerical simulation of physical phenomena, like electro-magnetics, structural and fluid mechanics is essential for the cost- and time-efficient development of mechanical products at high quality. It allows to investigate the behavior of a product or a system far before the first prototype of a product is manufactured. This thesis addresses the simulation of contact mechanics. Mechanical contacts appear in nearly every product of mechanical engineering. Gearboxes, roller bearings, valves and pumps are only some examples. Simulating these systems not only for the maximal/minimal stresses and strains but for the stress-distribution in case of tribo-contacts is a challenging task from a numerical point of view. Classical procedures like the Finite Element Method suffer from the nonsmooth representation of contact surfaces with discrete Lagrange elements. On the one hand, an error due to the approximate description of the surface is introduced. On the other hand it is difficult to attain a robust contact search because surface normals can not be described in a unique form at element edges. This thesis introduces therefore a novel approach, the adaptive isogeometric contact formulation based on polynomial Splines over hierarchical T-meshes (PHT-Splines), for the approximate solution of the non-linear contact problem. It provides a more accurate, robust and efficient solution compared to conventional methods. During the development of this method the focus was laid on the solution of static contact problems without friction in 2D and 3D in which the structures undergo small deformations. The mathematical description of the problem entails a system of partial differential equations and boundary conditions which model the linear elastic behaviour of continua. Additionally, it comprises side conditions, the Karush-Kuhn-Tuckerconditions, to prevent the contacting structures from non-physical penetration. The mathematical model must be transformed into its integral form for approximation of the solution. Employing a penalty method, contact constraints are incorporated by adding the resulting equations in weak form to the overall set of equations. For an efficient space discretization of the bulk and especially the contact boundary of the structures, the principle of Isogeometric Analysis (IGA) is applied. Isogeometric Finite Element Methods provide several advantages over conventional Finite Element discretization. Surface approximation with Non-Uniform Rational B-Splines (NURBS) allow a robust numerical solution of the contact problem with high accuracy in terms of an exact geometry description including the surface smoothness. The numerical evaluation of the contact integral is challenging due to generally non-conforming meshes of the contacting structures. In this work the highly accurate Mortar Method is applied in the isogeometric setting for the evaluation of contact contributions. This leads to an algebraic system of equations that is linearized and solved in sequential steps. This procedure is known as the Newton Raphson Method. Based on numerical examples, the advantages of the isogeometric approach with classical refinement strategies, like the p- and h-refinement, are shown and the influence of relevant algorithmic parameters on the approximate solution of the contact problem is verified. One drawback of the Spline approximations of stresses though is that they lack accuracy at the contact edge where the structures change their boundary from contact to no contact and where the solution features a kink. The approximation with smooth Spline functions yields numerical artefacts in the form of non-physical oscillations. This property of the numerical solution is not only a drawback for the simulation of e.g. tribological contacts, it also influences the convergence properties of iterative solution procedures negatively. Hence, the NURBS discretized geometries are transformed to Polynomial Splines over Hierarchical T-meshes (PHT-Splines), for the local refinement along contact edges to reduce the artefact of pressure oscillations. NURBS have a tensor product structure which does not allow to refine only certain parts of the geometrical domain while leaving other parts unchanged. Due to the B{\´e}zier Extraction, lying behind the transformation from NURBS to PHT-Splines, the connected mesh structure is broken up into separate elements. This allows an efficient local refinement along the contact edge. Before single elements are refined in a hierarchical form with cross-insertion, existing basis functions must be modified or eliminated. This process of truncation assures local and global linear independence of the refined basis which is needed for a unique approximate solution. The contact boundary is a priori unknown. Local refinement along the contact edge, especially for 3D problems, is for this reason not straight forward. In this work the use of an a posteriori error estimation procedure, the Super Convergent Recovery Solution Based Error Estimation Scheme, together with the D{\"o}rfler Marking Method is suggested for the spatial search of the contact edge. Numerical examples show that the developed method improves the quality of solutions along the contact edge significantly compared to NURBS based approximate solutions. Also, the error in maximum contact pressures, which correlates with the pressure artefacts, is minimized by the adaptive local refinement. In a final step the practicability of the developed solution algorithm is verified by an industrial application: The highly loaded mechanical contact between roller and cam in the drive train of a high-pressure fuel pump is considered.}, subject = {Isogeometrische Analyse}, language = {en} } @book{OPUS4-4604, title = {Ausgr{\"u}ndung aus der Universit{\"a}t - Ein praktischer Leitfaden f{\"u}r Wissenschaftler*innen}, editor = {Zorn, Josephine}, doi = {10.25643/bauhaus-universitaet.4604}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220311-46048}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {74}, abstract = {Ob MP3-Player, Elektro-Jet oder Hochgeschwindigkeits-R{\"o}ntgendetektor - hinter erfolgreichen Produkten stehen wissenschaftliche Erfindungen und Wissenschaftler*innen, die ihre Technologien kommerzialisiert haben. Auch Ihre Forschungsergebnisse k{\"o}nnten Potenzial f{\"u}r eine Ausgr{\"u}ndung bieten. Doch vor dem Wechsel aus der Universit{\"a}t in die Selbstst{\"a}ndigkeit stehen viele Fragen: Welche Marktchancen ergeben sich f{\"u}r meine Technologie? Welche Kompetenzen ben{\"o}tige ich in meinem Gr{\"u}ndungsteam? Wie entwickle ich ein tragf{\"a}higes Gesch{\"a}ftsmodell? Und nicht zuletzt: Welche F{\"o}rderprogramme und Finanzierungsoptionen gibt es f{\"u}r forschungsbasierte Ausgr{\"u}ndungen? Das Workbook der Gr{\"u}nderwerkstatt neudeli m{\"o}chte Ihnen als Wissenschaftler*in Unterst{\"u}tzung bei der Beantwortung dieser und vieler weiterer Fragen geben. Liebevoll gestaltet durch die parzelle34 bietet das Workbook den geeigneten Einstieg zum Thema »Ausgr{\"u}ndung aus der Wissenschaft«, gibt Ihnen erste Informationen sowie weiterf{\"u}hrende Beratungsangebote an die Hand und animiert mit interaktiven Elementen dazu, direkt durchzustarten!}, subject = {Wissenschaft}, language = {de} } @article{PatzeltErfurtLudwig, author = {Patzelt, Max and Erfurt, Doreen and Ludwig, Horst-Michael}, title = {Quantification of cracks in concrete thin sections considering current methods of image analysis}, series = {Journal of Microscopy}, volume = {2022}, journal = {Journal of Microscopy}, number = {Volume 286, Issue 2}, doi = {10.1111/jmi.13091}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220811-46754}, pages = {154 -- 159}, abstract = {Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze-thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones.}, subject = {Beton}, language = {en} } @phdthesis{ShaabanMohamed, author = {Shaaban Mohamed, Ahmed Mostafa}, title = {Isogeometric boundary element analysis and structural shape optimization for Helmholtz acoustic problems}, doi = {10.25643/bauhaus-universitaet.4703}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220816-47030}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In this thesis, a new approach is developed for applications of shape optimization on the time harmonic wave propagation (Helmholtz equation) for acoustic problems. This approach is introduced for different dimensional problems: 2D, 3D axi-symmetric and fully 3D problems. The boundary element method (BEM) is coupled with the isogeometric analysis (IGA) forming the so-called (IGABEM) which speeds up meshing and gives higher accuracy in comparison with standard BEM. BEM is superior for handling unbounded domains by modeling only the inner boundaries and avoiding the truncation error, present in the finite element method (FEM) since BEM solutions satisfy the Sommerfeld radiation condition automatically. Moreover, BEM reduces the space dimension by one from a volumetric three-dimensional problem to a surface two-dimensional problem, or from a surface two-dimensional problem to a perimeter one-dimensional problem. Non-uniform rational B-splines basis functions (NURBS) are used in an isogeometric setting to describe both the CAD geometries and the physical fields. IGABEM is coupled with one of the gradient-free optimization methods, the Particle Swarm Optimization (PSO) for structural shape optimization problems. PSO is a straightforward method since it does not require any sensitivity analysis but it has some trade-offs with regard to the computational cost. Coupling IGA with optimization problems enables the NURBS basis functions to represent the three models: shape design, analysis and optimization models, by a definition of a set of control points to be the control variables and the optimization parameters as well which enables an easy transition between the three models. Acoustic shape optimization for various frequencies in different mediums is performed with PSO and the results are compared with the benchmark solutions from the literature for different dimensional problems proving the efficiency of the proposed approach with the following remarks: - In 2D problems, two BEM methods are used: the conventional isogeometric boundary element method (IGABEM) and the eXtended IGABEM (XIBEM) enriched with the partition-of-unity expansion using a set of plane waves, where the results are generally in good agreement with the linterature with some computation advantage to XIBEM which allows coarser meshes. -In 3D axi-symmetric problems, the three-dimensional problem is simplified in BEM from a surface integral to a combination of two 1D integrals. The first is the line integral similar to a two-dimensional BEM problem. The second integral is performed over the angle of revolution. The discretization is applied only to the former integration. This leads to significant computational savings and, consequently, better treatment for higher frequencies over the full three-dimensional models. - In fully 3D problems, a detailed comparison between two BEM methods: the conventional boundary integral equation (CBIE) and Burton-Miller (BM) is provided including the computational cost. The proposed models are enhanced with a modified collocation scheme with offsets to Greville abscissae to avoid placing collocation points at the corners. Placing collocation points on smooth surface enables accurate evaluation of normals for BM formulation in addition to straightforward prediction of jump-terms and avoids singularities in \$\mathcal{O} (1/r)\$ integrals eliminating the need for polar integration. Furthermore, no additional special treatment is required for the hyper-singular integral while collocating on highly distorted elements, such as those containing sphere poles. The obtained results indicate that, CBIE with PSO is a feasible alternative (except for a small number of fictitious frequencies) which is easier to implement. Furthermore, BM presents an outstanding treatment of the complicated geometry of mufflers with internal extended inlet/outlet tube as an interior 3D Helmholtz acoustic problem instead of using mixed or dual BEM.}, subject = {Randelemente-Methode}, language = {en} } @phdthesis{Cicek, author = {Cicek, Burhan}, title = {Revisiting vernacular technique: Engineering a low environmental impact earth stabilisation method}, doi = {10.25643/bauhaus-universitaet.4698}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220803-46989}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {195}, abstract = {The major drawbacks of earth as a construction material — such as its low water stability and moderate strength — have led mankind to stabilize earth. Different civilizations developed vernacular techniques mainly focussing on lime, pozzolan or gypsum stabilization. Recently, cement has become the most commonly used additive in earth stabilization as it improves the strength and durability of plain earth. Also, it is a familiar and globally available construction material. However, using cement as an additive reduces the environmental advantages of earth and run counter to global targets regarding the reduction of CO2 emissions. Alternatives to cement stabilization are currently neither efficient enough to reduce its environmental impact nor allow the possibility of obtaining better results than those of cement. As such, this thesis deals with the rediscovery of a reverse engineering approach for a low environmental impact earth stabilization technique, aiming to replace cement in earth stabilization. The first step in the method consists in a comprehensive review of earth stabilization with regards to earthen building standards and soil classification, which allows us to identify the research gap. The review showed that there is great potential in using other additives which result in similar improvements as those achieved by cement. However, the studies that have been conducted so far either use expansive soils, which are not suitable for earth constructions or artificial pozzolans that indirectly contribute to CO2 emissions. This is the main research gap. The key concept for the development in the second step of the method is to combine vernacular additives to both improve the strength and durability of plain earth and to reduce the CO2 emissions. Various earth-mixtures were prepared and both development and performance tests were done to investigate the performance of this technique. The laboratory analyses on mix-design have proven a high durability and the results show a remarkable increase in strength performance. Furthermore, a significant reduction in CO2 emissions in comparison to cement stabilization could be shown. The third step of the method discusses the results drawn from the experimental programme. In addition, the potential of the new earth mixture with regards to its usability in the field of building construction and architectural design is further elaborated on. The method used in this study is the first of its kind that allows investors to avoid the very time-consuming processes such as finding a suitable source for soil excavation and soil classification. The developed mixture has significant workability and suitability for production of stabilized earthen panels — the very first of its kind. Such a panel is practically feasible, reasonable, and could be integrated into earthen building standards in general and in particular to DIN 18948, which is related to earthen boards and published in 2018.}, subject = {Lehm}, language = {en} } @phdthesis{Damir, author = {Damir, Mirhan}, title = {Recalling the Omitted: Exploring the Spatial Development of the Modern Industrial Legacies in Egypt. The Case of Alexandria.}, doi = {10.25643/bauhaus-universitaet.4619}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220329-46196}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The modern industries of the 19th and 20th centuries had multiple effects on the spatial transformation of cities and regions. The past decade has witnessed increasing scholarly and governmental attempts toward conserving modern industrial heritage in the so-called Global North, with the goal, among others, of leveraging this heritage as a driver for urban economic development. In Egypt, the process continues to lag behind; on the one hand, this is due to the perplexing official recognition of the (in)tangible witnesses of modern industries. On the other hand, the official recognition and previous publications focus predominantly on weighing the significance of industrial structures based on their monumental architectural aesthetics. Their historical urban role and spatial attributes as part of urban heritage have yet to be seriously acknowledged. Accordingly, this hinders the integration of the extant industrial sites into the broader debate surrounding urban conservation, leaving them vulnerable to decay and destruction. This dissertation steers away from the singular investigation of selective modern industrial sites to recall their historical spatial development on a city scale. This is effected by investigating a case study - the Egyptian port city of Alexandria. With the limited secondary data available on modern industries in Alexandria, this dissertation relied predominantly on primary sources. The author collected and leveraged both quantitative and qualitative data to recontextualize modern industries in terms of their spatial dynamics, order, and rationale within cities' transformation. By recalling historical spatial development in Alexandria, the contribution of this dissertation lies in highlighting what the author refers to as the Omitted Heritage. This is defined by the modern industries in Egypt that are intentionally, unintentionally, and forgetfully excluded in terms of physical documentation, evaluation, appreciation, and integration within urban development plans. The method used excavated the richness of the established modern industries in Alexandria in terms of their quantity and diversity, which would have otherwise remained largely forgotten. The contextualization of modern industries unveiled spatial periodization, spatial dynamics, and conceptual development. The study draws on important analytical aspects that transcend the sites' boundaries, elevating their significance to the municipal, regional, national, and even global levels. Its recommendations for further research are also divided into those levels.}, subject = {{\"A}gypten}, language = {en} } @article{ZhangRen, author = {Zhang, Yongzheng and Ren, Huilong}, title = {Implicit implementation of the nonlocal operator method: an open source code}, series = {Engineering with computers}, volume = {2022}, journal = {Engineering with computers}, publisher = {Springer}, address = {London}, doi = {10.1007/s00366-021-01537-x}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220216-45930}, pages = {1 -- 35}, abstract = {In this paper, we present an open-source code for the first-order and higher-order nonlocal operator method (NOM) including a detailed description of the implementation. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combined with the method of weighed residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. The implementation in this paper is focused on linear elastic solids for sake of conciseness through the NOM can handle more complex nonlinear problems. The NOM can be very flexible and efficient to solve partial differential equations (PDEs), it's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Finally, we present some classical benchmark problems including the classical cantilever beam and plate-with-a-hole problem, and we also make an extension of this method to solve complicated problems including phase-field fracture modeling and gradient elasticity material.}, subject = {Strukturmechanik}, language = {en} } @article{Zhang, author = {Zhang, Yongzheng}, title = {Nonlocal dynamic Kirchhoff plate formulation based on nonlocal operator method}, series = {Engineering with Computers}, volume = {2022}, journal = {Engineering with Computers}, publisher = {Springer}, address = {London}, doi = {10.1007/s00366-021-01587-1}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220209-45849}, pages = {1 -- 35}, abstract = {In this study, we propose a nonlocal operator method (NOM) for the dynamic analysis of (thin) Kirchhoff plates. The nonlocal Hessian operator is derived based on a second-order Taylor series expansion. The NOM does not require any shape functions and associated derivatives as 'classical' approaches such as FEM, drastically facilitating the implementation. Furthermore, NOM is higher order continuous, which is exploited for thin plate analysis that requires C1 continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for the time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation.}, subject = {Angewandte Mathematik}, language = {en} } @phdthesis{Zhang, author = {Zhang, Yongzheng}, title = {A Nonlocal Operator Method for Quasi-static and Dynamic Fracture Modeling}, doi = {10.25643/bauhaus-universitaet.4732}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20221026-47321}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons. Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form. The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows: -The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method. -A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires \$C^1\$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. -A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved.}, subject = {Variationsprinzip}, language = {en} } @article{RabczukGuoZhuangetal., author = {Rabczuk, Timon and Guo, Hongwei and Zhuang, Xiaoying and Chen, Pengwan and Alajlan, Naif}, title = {Stochastic deep collocation method based on neural architecture search and transfer learning for heterogeneous porous media}, series = {Engineering with Computers}, volume = {2022}, journal = {Engineering with Computers}, publisher = {Springer}, address = {London}, doi = {10.1007/s00366-021-01586-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220209-45835}, pages = {1 -- 26}, abstract = {We present a stochastic deep collocation method (DCM) based on neural architecture search (NAS) and transfer learning for heterogeneous porous media. We first carry out a sensitivity analysis to determine the key hyper-parameters of the network to reduce the search space and subsequently employ hyper-parameter optimization to finally obtain the parameter values. The presented NAS based DCM also saves the weights and biases of the most favorable architectures, which is then used in the fine-tuning process. We also employ transfer learning techniques to drastically reduce the computational cost. The presented DCM is then applied to the stochastic analysis of heterogeneous porous material. Therefore, a three dimensional stochastic flow model is built providing a benchmark to the simulation of groundwater flow in highly heterogeneous aquifers. The performance of the presented NAS based DCM is verified in different dimensions using the method of manufactured solutions. We show that it significantly outperforms finite difference methods in both accuracy and computational cost.}, subject = {Maschinelles Lernen}, language = {en} } @article{ChakrabortyAnitescuZhuangetal., author = {Chakraborty, Ayan and Anitescu, Cosmin and Zhuang, Xiaoying and Rabczuk, Timon}, title = {Domain adaptation based transfer learning approach for solving PDEs on complex geometries}, series = {Engineering with Computers}, volume = {2022}, journal = {Engineering with Computers}, doi = {10.1007/s00366-022-01661-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220811-46776}, pages = {1 -- 20}, abstract = {In machine learning, if the training data is independently and identically distributed as the test data then a trained model can make an accurate predictions for new samples of data. Conventional machine learning has a strong dependence on massive amounts of training data which are domain specific to understand their latent patterns. In contrast, Domain adaptation and Transfer learning methods are sub-fields within machine learning that are concerned with solving the inescapable problem of insufficient training data by relaxing the domain dependence hypothesis. In this contribution, this issue has been addressed and by making a novel combination of both the methods we develop a computationally efficient and practical algorithm to solve boundary value problems based on nonlinear partial differential equations. We adopt a meshfree analysis framework to integrate the prevailing geometric modelling techniques based on NURBS and present an enhanced deep collocation approach that also plays an important role in the accuracy of solutions. We start with a brief introduction on how these methods expand upon this framework. We observe an excellent agreement between these methods and have shown that how fine-tuning a pre-trained network to a specialized domain may lead to an outstanding performance compare to the existing ones. As proof of concept, we illustrate the performance of our proposed model on several benchmark problems.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Nouri, author = {Nouri, Hamidreza}, title = {Mechanical Behavior of two dimensional sheets and polymer compounds based on molecular dynamics and continuum mechanics approach}, doi = {10.25643/bauhaus-universitaet.4670}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220713-46700}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {152}, abstract = {Compactly, this thesis encompasses two major parts to examine mechanical responses of polymer compounds and two dimensional materials: 1- Molecular dynamics approach is investigated to study transverse impact behavior of polymers, polymer compounds and two dimensional materials. 2- Large deflection of circular and rectangular membranes is examined by employing continuum mechanics approach. Two dimensional materials (2D), including, Graphene and molybdenum disulfide (MoS2), exhibited new and promising physical and chemical properties, opening new opportunities to be utilized alone or to enhance the performance of conventional materials. These 2D materials have attracted tremendous attention owing to their outstanding physical properties, especially concerning transverse impact loading. Polymers, with the backbone of carbon (organic polymers) or do not include carbon atoms in the backbone (inorganic polymers) like polydimethylsiloxane (PDMS), have extraordinary characteristics particularly their flexibility leads to various easy ways of forming and casting. These simple shape processing label polymers as an excellent material often used as a matrix in composites (polymer compounds). In this PhD work, Classical Molecular Dynamics (MD) is implemented to calculate transverse impact loading of 2D materials as well as polymer compounds reinforced with graphene sheets. In particular, MD was adopted to investigate perforation of the target and impact resistance force . By employing MD approach, the minimum velocity of the projectile that could create perforation and passes through the target is obtained. The largest investigation was focused on how graphene could enhance the impact properties of the compound. Also the purpose of this work was to discover the effect of the atomic arrangement of 2D materials on the impact problem. To this aim, the impact properties of two different 2D materials, graphene and MoS2, are studied. The simulation of chemical functionalization was carried out systematically, either with covalently bonded molecules or with non-bonded ones, focusing the following efforts on the covalently bounded species, revealed as the most efficient linkers. To study transverse impact behavior by using classical MD approach , Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) software, that is well-known among most researchers, is employed. The simulation is done through predefined commands in LAMMPS. Generally these commands (atom style, pair style, angle style, dihedral style, improper style, kspace style, read data, fix, run, compute and so on) are used to simulate and run the model for the desired outputs. Depends on the particles and model types, suitable inter-atomic potentials (force fields) are considered. The ensembles, constraints and boundary conditions are applied depends upon the problem definition. To do so, atomic creation is needed. Python codes are developed to generate particles which explain atomic arrangement of each model. Each atomic arrangement introduced separately to LAMMPS for simulation. After applying constraints and boundary conditions, LAMMPS also include integrators like velocity-Verlet integrator or Brownian dynamics or other types of integrator to run the simulation and finally the outputs are emerged. The outputs are inspected carefully to appreciate the natural behavior of the problem. Appreciation of natural properties of the materials assist us to design new applicable materials. In investigation on the large deflection of circular and rectangular membranes, which is related to the second part of this thesis, continuum mechanics approach is implemented. Nonlinear F{\"o}ppl membrane theory, which carefully release nonlinear governing equations of motion, is considered to establish the non-linear partial differential equilibrium equations of the membranes under distributed and centric point loads. The Galerkin and energy methods are utilized to solve non-linear partial differential equilibrium equations of circular and rectangular plates respectively. Maximum deflection as well as stress through the film region, which are kinds of issue in many industrial applications, are obtained.}, subject = {Molekulardynamik}, language = {en} } @phdthesis{Jenabidehkordi, author = {Jenabidehkordi, Ali}, title = {An Efficient Adaptive PD Formulation for Complex Microstructures}, doi = {10.25643/bauhaus-universitaet.4742}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20221124-47422}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {118}, abstract = {The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridy- namic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dy- namic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three dis- tinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions.}, subject = {Peridynamik}, language = {en} } @phdthesis{Hanna, author = {Hanna, John}, title = {Computational Fracture Modeling and Design of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique}, doi = {10.25643/bauhaus-universitaet.4746}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20221124-47467}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {125}, abstract = {Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations.}, subject = {Beton}, language = {en} } @phdthesis{CarvajalBermudez, author = {Carvajal Berm{\´u}dez, Juan Carlos}, title = {New methods of citizen participation based on digital technologies}, doi = {10.25643/bauhaus-universitaet.4712}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220906-47124}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis. The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods. The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation.}, subject = {Partizipation}, language = {en} } @phdthesis{Vogler, author = {Vogler, Verena}, title = {A framework for artificial coral reef design: Integrating computational modelling and high precision monitoring strategies for artificial coral reefs - an Ecosystem-aware design approach in times of climate change}, isbn = {978-3-00-074495-2}, doi = {10.25643/bauhaus-universitaet.4611}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220322-46115}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {243}, abstract = {Tropical coral reefs, one of the world's oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling. The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts. Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem. For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation - two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012-today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time. In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs - demonstrating the feasibility of digitally designing such 'living architecture' according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation - not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them. Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design.}, subject = {Korallenriff}, language = {en} }