@incollection{Zimprich, author = {Zimprich, Inga}, title = {K{\"o}rperstreik}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4260}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42607}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {91 -- 102}, abstract = {Feministische Gesundheitsrecherchegruppe}, subject = {Femimismus}, language = {de} } @article{WolfLondong, author = {Wolf, Mario and Londong, J{\"o}rg}, title = {Transformation der Siedlungswasserwirtschaft - Steuerungsmechanismen im Diskurs ressourcenorientierter Systemans{\"a}tze am Beispiel von Th{\"u}ringen}, series = {Raumforschung und Raumordnung}, volume = {2020}, journal = {Raumforschung und Raumordnung}, number = {Band 78, Heft 4}, publisher = {Sciendo}, doi = {10.2478/rara-2020-0012}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42731}, pages = {397 -- 411}, abstract = {Neuartige Sanit{\"a}rsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilstr{\"o}men. In den Fach{\"o}ffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanit{\"a}rsysteme als ein geeigneter Ansatz f{\"u}r die zuk{\"u}nftige Sicherung der Abwasserentsorgung in l{\"a}ndlichen R{\"a}umen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch f{\"u}r Abwasserentsorger vielf{\"a}ltige Risiken die Einf{\"u}hrung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanit{\"a}rsystems im l{\"a}ndlichen Raum Th{\"u}ringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einf{\"u}hrung von ressourcenorientierten Systemans{\"a}tzen unterst{\"u}tzt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einf{\"u}hrung innovativer L{\"o}sungsans{\"a}tze, eine Erl{\"a}uterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsans{\"a}tzen,mit denen die Einf{\"u}hrung von neuartigen Sanit{\"a}rsystemen gef{\"o}rdert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanit{\"a}rsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist.}, subject = {Raumordnung}, language = {de} } @phdthesis{Winkel, author = {Winkel, Benjamin}, title = {A three-dimensional model of skeletal muscle for physiological, pathological and experimental mechanical simulations}, doi = {10.25643/bauhaus-universitaet.4300}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201211-43002}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In recent decades, a multitude of concepts and models were developed to understand, assess and predict muscular mechanics in the context of physiological and pathological events. Most of these models are highly specialized and designed to selectively address fields in, e.g., medicine, sports science, forensics, product design or CGI; their data are often not transferable to other ranges of application. A single universal model, which covers the details of biochemical and neural processes, as well as the development of internal and external force and motion patterns and appearance could not be practical with regard to the diversity of the questions to be investigated and the task to find answers efficiently. With reasonable limitations though, a generalized approach is feasible. The objective of the work at hand was to develop a model for muscle simulation which covers the phenomenological aspects, and thus is universally applicable in domains where up until now specialized models were utilized. This includes investigations on active and passive motion, structural interaction of muscles within the body and with external elements, for example in crash scenarios, but also research topics like the verification of in vivo experiments and parameter identification. For this purpose, elements for the simulation of incompressible deformations were studied, adapted and implemented into the finite element code SLang. Various anisotropic, visco-elastic muscle models were developed or enhanced. The applicability was demonstrated on the base of several examples, and a general base for the implementation of further material models was developed and elaborated.}, subject = {Biomechanik}, language = {en} } @masterthesis{Wild, type = {Bachelor Thesis}, author = {Wild, Lena}, title = {Patient l{\"a}ndlicher Raum. Planungen und F{\"o}rdermaßnahmen zur Sicherstellung der medizinischen Versorgung in Th{\"u}ringen}, doi = {10.25643/bauhaus-universitaet.4340}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210121-43400}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {83}, abstract = {Die Sicherstellung der medizinischen Versorgung in der Bundesrepublik wird seit einigen Jahren verst{\"a}rkt diskutiert. Besonders in l{\"a}ndliche Regionen ist die Gew{\"a}hrleistung einer bedarfsgerechten medizinischen Versorgung problematisch. L{\"a}ngst ist dies zu einem gesamtgesellschaftlichen Thema geworden. Die Bachelorarbeit von Lena Wild untersucht die Schnittstelle von r{\"a}umlicher Planung und medizinischer Planung mit der Frage „Inwiefern leisten die derzeitigen Planungen und F{\"o}rderprogramme einen positiven Beitrag zur Sicherstellung der medizinischen Versorgung im l{\"a}ndlichen Raum Th{\"u}ringens?" Neben einer Literatur- und Datenanalyse stehen Expert:inneninterviews mit verschiedenen kommunalen und medizinischen Akteur:innen aus ausgew{\"a}hlten Landkreisen in Th{\"u}ringen im Fokus der Arbeit. Nach einer Einordnung der medizinischen Versorgung in den Kontext der r{\"a}umlichen Planung wird eine {\"U}bersicht {\"u}ber das Gesundheitssystem der Bundesrepublik und die Besonderheiten in Ostdeutschland gegeben. Darauffolgend werden Instrumente zur Steuerung der medizinischen Versorgung genauer untersucht. Besonders die kassen{\"a}rztliche Bedarfsplanung als zentrales Steuerungsinstrument und die F{\"o}rderm{\"o}glichkeiten in Th{\"u}ringen und deren Wirkungsweisen stehen dabei im Fokus. Im Weiteren wird auf l{\"a}ndliche R{\"a}ume und deren Herausforderungen f{\"u}r die Sicherstellung der medizinischen Versorgung und die Kommunikation und Zusammenarbeit der Akteur:innen eingegangen. Die Arbeit ist als Exkurs der Raumplanung in eine Fachplanung zu verstehen. Zwischen medizinischer Fachplanung und r{\"a}umlicher Planung bestehen Wechselwirkungen. Das Kennen von Instrumenten und Wirkungsweisen der anderen Disziplin schafft dabei einen Mehrwert, um gemeinsame Ziele, wie die fl{\"a}chendeckende medizinische Versorgung und damit einhergehend eine nachhaltige r{\"a}umliche Entwicklung, zu erreichen.}, subject = {L{\"a}ndlicher Raum}, language = {de} } @book{WellbrockBuschow, author = {Wellbrock, Christian-Mathias and Buschow, Christopher}, title = {Money for Nothing and Content for Free?}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-7489-0725-1}, doi = {10.5771/9783748907251}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201001-42475}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {209}, abstract = {Wie k{\"o}nnen journalistische Angebote nachhaltig finanziert werden? Dies bleibt die Kernfrage f{\"u}r Medienh{\"a}user und journalistische Neugr{\"u}ndungen bei der Entwicklung und beim Aufbau tragf{\"a}higer digitaler Gesch{\"a}ftsmodelle. Die Autoren des vorliegenden Bandes vermitteln einen breiten {\"U}berblick {\"u}ber den Wissensstand zum Thema Paid Content, Plattformen und Zahlungsbereitschaft im Journalismus und er{\"o}ffnen innovative Blickwinkel auf neuartige Plattformmodelle ebenso wie auf Motive und Bed{\"u}rfnisse der Nutzerinnen und Nutzer digitaljournalistischer Inhalte. Auf Grundlage empirischer Forschung werden Handlungsempfehlungen f{\"u}r die nutzerzentrierte Ausgestaltung von Paid-Content-Angeboten sowie neue Perspektiven auf Zahlungsbereitschaft im digitalen Journalismus erschlossen - relevant sowohl f{\"u}r die Wissenschaft wie auch f{\"u}r die Medienpraxis.}, subject = {Digitaljournalismus}, language = {de} } @article{WellbrockArangoKureBuschow, author = {Wellbrock, Christian-Mathias and Arango Kure, Maria and Buschow, Christopher}, title = {Competition and Media Performance: A Cross-National Analysis of Corporate Goals of Media Companies in 12 Countries}, series = {International Journal of Communication}, volume = {2020}, journal = {International Journal of Communication}, number = {Vol 14 (2020)}, publisher = {USC, University of Southern California}, address = {Annenberg, California}, doi = {10.25643/bauhaus-universitaet.4317}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201221-43175}, pages = {6154 -- 6181}, abstract = {Despite digitization and platformization, mass media and established media companies still play a crucial role in the provision of journalistic content in democratic societies. Competition is one key driver of (media) company behavior and is considered to have an impact on the media's performance. However, theory and empirical research are ambiguous about the relationship. The objective of this article is to empirically analyze the effect of competition on media performance in a cross-national context. We assessed media performance of media companies as the importance of journalistic goals within their stated corporate goal system. We conducted a content analysis of letters to the shareholders in annual reports of more than 50 media companies from 2000 to 2014 to operationalize journalistic goal importance. When employing a fixed effects regression analysis, as well as a fuzzy set qualitative comparative analysis, results suggest that competition has a positive effect on the importance of journalistic goals, while the existence of a strong public service media sector appears to have the effect of "crowding out" commercial media companies.}, subject = {{\"O}ffentlich-rechtlicher Rundfunk}, language = {en} } @misc{VollmerMichel, author = {Vollmer, Lisa and Michel, Boris}, title = {Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage: Aufruf zur Debatte}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.552}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43327}, pages = {163 -- 166}, abstract = {Die Verbindung der sozialen und der {\"o}kologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Daf{\"u}r, wie wenig das bisher gelingt, sind die {\"o}ffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der {\"o}kologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beitr{\"a}gen weiter auszuf{\"u}hren und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten.}, subject = {Wohnen}, language = {de} } @unpublished{VogelVoelkerBodeetal., author = {Vogel, Albert and V{\"o}lker, Conrad and Bode, Matthias and Marx, Steffen}, title = {Messung und Simulation der Erw{\"a}rmung von erm{\"u}dungsbeanspruchten Betonprobek{\"o}rpern}, series = {Bauphysik}, volume = {2020}, journal = {Bauphysik}, number = {Volume 42, Issue 2}, publisher = {John Wiley and Sons}, doi = {10.25643/bauhaus-universitaet.4147}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200425-41471}, pages = {86 -- 93}, abstract = {Im vorliegenden Beitrag werden Messungen und Berechnungen vorgestellt, die die Temperaturentwicklung in Betonzylindern aufgrund zyklischer Beanspruchung genau beschreiben. Die Messungen wurden in einem Versuchsstand, die Berechnungen im FEM-Programm ANSYS durchgef{\"u}hrt. Mit Hilfe der Temperaturmessungen konnten die Simulationen f{\"u}r die Temperaturentwicklung der Betonzylinder mit der verwendeten Betonrezeptur validiert werden. Die Untersuchungen lassen den Schluss zu, dass bei zyklischer Probek{\"o}rperbelastung und der einhergehenden Probek{\"o}rperdehnung Energie dissipiert wird und diese maßgeblich f{\"u}r die Erw{\"a}rmung der Probe verantwortlich ist.}, subject = {zyklische Beanspruchung}, language = {de} } @unpublished{VogelBenzVoelker, author = {Vogel, Albert and Benz, Alexander and V{\"o}lker, Conrad}, title = {Untersuchung des W{\"a}rme{\"u}bergangs von zyklisch beanspruchten Betonzylindern}, volume = {2020}, number = {Volume 42, Issue 3}, publisher = {John Wiley and Sons}, doi = {10.25643/bauhaus-universitaet.4181}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200619-41813}, pages = {131 -- 138}, abstract = {Wiederkehrende Belastungen, wie sie beispielsweise an Br{\"u}cken oder Windenergieanlagen auftreten, k{\"o}nnen innerhalb der Nutzungsdauer solcher Bauwerke bis zu 1.000.000.000 Lastwechsel erreichen. Um das dadurch eintretende Erm{\"u}dungsverhalten von Beton zu untersuchen, werden diese zyklischen Beanspruchungen in mechanischen Versuchen mit Pr{\"u}fzylindern nachgestellt. Damit Versuche mit solch hohen Lastwechselzahlen in akzeptablen Zeitdauern durchgef{\"u}hrt werden k{\"o}nnen, wird die Belastungsfrequenz erh{\"o}ht. Als Folge dieser erh{\"o}hten Belas-tungsfrequenz erw{\"a}rmen sich allerdings die Betonprobek{\"o}rper, was zu einem fr{\"u}heren, unrealistischen Versagenszeitpunkt f{\"u}hren kann, weshalb die Erw{\"a}rmung begrenzt werden muss. Um die W{\"a}rmefreisetzung in der Probe zu untersuchen, wurden Versuche und Simulationen durchgef{\"u}hrt. Im Beitrag wird die analytische und messtechnische Analyse des W{\"a}rme{\"u}bergangs an erw{\"a}rmten Betonzylindern vorgestellt. Resultierend daraus wird eine M{\"o}glichkeit zur Reduktion der Erw{\"a}rmung an zyklisch beanspruchten Betonzylindern vorgestellt.}, subject = {Zyklische Beanspruchung}, language = {de} } @article{TutalPartschefeldSchneideretal., author = {Tutal, Adrian and Partschefeld, Stephan and Schneider, Jens and Osburg, Andrea}, title = {Effects of Bio-Based Plasticizers, Made From Starch, on the Properties of Fresh and Hardened Metakaolin-Geopolymer Mortar: Basic Investigations}, series = {Clays and Clay Minerals}, volume = {2020}, journal = {Clays and Clay Minerals}, number = {volume 68, No. 5}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42860-020-00084-8}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44737}, pages = {413 -- 427}, abstract = {Conventional superplasticizers based on polycarboxylate ether (PCE) show an intolerance to clay minerals due to intercalation of their polyethylene glycol (PEG) side chains into the interlayers of the clay mineral. An intolerance to very basic media is also known. This makes PCE an unsuitable choice as a superplasticizer for geopolymers. Bio-based superplasticizers derived from starch showed comparable effects to PCE in a cementitious system. The aim of the present study was to determine if starch superplasticizers (SSPs) could be a suitable additive for geopolymers by carrying out basic investigations with respect to slump, hardening, compressive and flexural strength, shrinkage, and porosity. Four SSPs were synthesized, differing in charge polarity and specific charge density. Two conventional PCE superplasticizers, differing in terms of molecular structure, were also included in this study. The results revealed that SSPs improved the slump of a metakaolin-based geopolymer (MK-geopolymer) mortar while the PCE investigated showed no improvement. The impact of superplasticizers on early hardening (up to 72 h) was negligible. Less linear shrinkage over the course of 56 days was seen for all samples in comparison with the reference. Compressive strengths of SSP specimens tested after 7 and 28 days of curing were comparable to the reference, while PCE led to a decline. The SSPs had a small impact on porosity with a shift to the formation of more gel pores while PCE caused an increase in porosity. Throughout this research, SSPs were identified as promising superplasticizers for MK-geopolymer mortar and concrete.}, subject = {Geopolymere}, language = {en} } @phdthesis{Truemer, author = {Tr{\"u}mer, Andr{\´e}}, title = {Calcinierte Tone als Puzzolane der Zukunft - Von den Rohstoffen bis zur Wirkung im Beton}, isbn = {978-3-00-065011-6}, doi = {10.25643/bauhaus-universitaet.4096}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200214-40968}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {222}, abstract = {Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanit{\"a}t soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verf{\"u}gbarkeit sowie der {\"a}ußerst geringe rohstoffbedingte CO2-Ausstoß w{\"a}hrend der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Variet{\"a}t der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die {\"U}bertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivit{\"a}t auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung f{\"u}r die Anwendung im Beton herauszuarbeiten. In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus f{\"u}r Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivit{\"a}t der Brennprodukte als auch umgekehrt die H{\"o}he der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von r{\"o}ntgenamorph und hochreaktiv zu glasig und reaktionstr{\"a}ge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanit{\"a}t festgestellt werden. Dies best{\"a}tigte sich anschließend in Parameterversuchen, bei denen die Einfl{\"u}sse von Rohstoffqualit{\"a}t, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivit{\"a}tsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualit{\"a}ten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die f{\"u}r Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorg{\"a}ngen abh{\"a}ngige Schadmechanismen unterdr{\"u}ckt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bem{\"a}ngeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die f{\"u}r Puzzolane stark ausgepr{\"a}gte Carbonatisierungsneigung. Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bez{\"u}glich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln k{\"o}nnen. So kann selbst ein stark verunreinigter Illit-Ton die Qualit{\"a}t von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Pr{\"a}sens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanit{\"a}ten bis hin zur hochreaktiven Metakaolin-Qualit{\"a}t. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsf{\"a}higkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen f{\"u}r eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend k{\"o}nnen Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten.}, subject = {Beton}, language = {de} } @incollection{ThamerTurnheim, author = {Thamer, Florian and Turnheim, Tina}, title = {INTRAAKTIVE THEATERLABORE - Theater der Sorge im Setting des ZRM3000}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4261}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42610}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {233 -- 269}, abstract = {das Theater der sorge ist konzipiert als 3-Phasen-modell: in der 1. Phase geht es um die hersTellung einer laborsituation, in der pr{\"a}figurative lebens-, denk- und arbeitsformen in diskursiver und spielerischer weise pr{\"a}sentisch erprobt und in konstituierende Prozesse {\"u}bertragen werden k{\"o}nnen; in der 2. Phase geht es um die gemeinschaftliche Konzeption, Vorbereitung und durchf{\"u}hrung einer das labor abschließenden {\"o}ffentlichen auFsTellung, die auf den kollektiven erfahrungen und ergebnissen der labore basiert. dadurch k{\"o}nnen gesellschaftliche resonanzen erzeugt und die konstituierenden Prozesse vorl{\"a}ufig instituiert werden. in der 3.Phase geht es dann darum, Vorbereitung: alle inhaltlichen erkenntnisse und {\"a}sthetischen Versuche in eine wiederholbare Theaterinszenierung / Performance zu {\"u}berf{\"u}hren. die n{\"o}tigen Voraussetzungen und bedingungen f{\"u}r diese von uns Vorstellungen genannten Formate sind f{\"u}r die hier verhandelte Fragestellung nicht von bedeutung - respektive w{\"u}rden sie den vorhandenen rahmen {\"u}berschreiten - daher sparen wir diesen Komplex an dieser stelle aus.}, subject = {Theater}, language = {de} } @phdthesis{Sung, author = {Sung, Younkyoung}, title = {Cultural Tourism and Social Resilience: Discourse of Historic Cities in East Germany, the Case of Gotha and Eisenach}, doi = {10.25643/bauhaus-universitaet.4092}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200212-40920}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created. To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process. The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents' lives? The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience. Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants.}, subject = {Stadtmarketing}, language = {en} } @article{ShamshirbandBabanezhadMosavietal., author = {Shamshirband, Shahaboddin and Babanezhad, Meisam and Mosavi, Amir and Nabipour, Narjes and Hajnal, Eva and Nadai, Laszlo and Chau, Kwok-Wing}, title = {Prediction of flow characteristics in the bubble column reactor by the artificial pheromone-based communication of biological ants}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {volume 14, issue 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1715842}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200227-41013}, pages = {367 -- 378}, abstract = {A novel combination of the ant colony optimization algorithm (ACO)and computational fluid dynamics (CFD) data is proposed for modeling the multiphase chemical reactors. The proposed intelligent model presents a probabilistic computational strategy for predicting various levels of three-dimensional bubble column reactor (BCR) flow. The results prove an enhanced communication between ant colony prediction and CFD data in different sections of the BCR.}, subject = {Maschinelles Lernen}, language = {en} } @article{ShabaniSamadianfardSattarietal., author = {Shabani, Sevda and Samadianfard, Saeed and Sattari, Mohammad Taghi and Mosavi, Amir and Shamshirband, Shahaboddin and Kmet, Tibor and V{\´a}rkonyi-K{\´o}czy, Annam{\´a}ria R.}, title = {Modeling Pan Evaporation Using Gaussian Process Regression K-Nearest Neighbors Random Forest and Support Vector Machines; Comparative Analysis}, series = {Atmosphere}, volume = {2020}, journal = {Atmosphere}, number = {Volume 11, Issue 1, 66}, doi = {10.3390/atmos11010066}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200110-40561}, pages = {17}, abstract = {Evaporation is a very important process; it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, evaporation is considered as a complex and nonlinear phenomenon to model. Thus, machine learning methods have gained popularity in this realm. In the present study, four machine learning methods of Gaussian Process Regression (GPR), K-Nearest Neighbors (KNN), Random Forest (RF) and Support Vector Regression (SVR) were used to predict the pan evaporation (PE). Meteorological data including PE, temperature (T), relative humidity (RH), wind speed (W), and sunny hours (S) collected from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error (RMSE), correlation coefficient (R) and Mean Absolute Error (MAE). Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. The results of this study showed that at Gonbad-e Kavus, Gorgan and Bandar Torkman stations, GPR with RMSE of 1.521 mm/day, 1.244 mm/day, and 1.254 mm/day, KNN with RMSE of 1.991 mm/day, 1.775 mm/day, and 1.577 mm/day, RF with RMSE of 1.614 mm/day, 1.337 mm/day, and 1.316 mm/day, and SVR with RMSE of 1.55 mm/day, 1.262 mm/day, and 1.275 mm/day had more appropriate performances in estimating PE values. It was found that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W and S had the most accurate predictions and were proposed for precise estimation of PE. The findings of the current study indicated that the PE values may be accurately estimated with few easily measured meteorological parameters.}, subject = {Maschinelles Lernen}, language = {en} } @article{SeichterNesslerKnopf, author = {Seichter, Cosima Zita and Neßler, Miriam and Knopf, Paul}, title = {Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes}, series = {Movements. Journal for Critical Migration and Border Regime Studies}, volume = {2020}, journal = {Movements. Journal for Critical Migration and Border Regime Studies}, number = {Volume 5, Issue 1}, address = {G{\"o}ttingen}, doi = {10.25643/bauhaus-universitaet.4480}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44807}, pages = {1 -- 9}, abstract = {The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union.}, subject = {Europ{\"a}ische Union}, language = {en} } @article{Schoenig, author = {Sch{\"o}nig, Barbara}, title = {Ererbte Transformation. Kommentar zu Matthias Bernt und Andrej Holm „Die Ostdeutschlandforschung muss das Wohnen in den Blick nehmen"}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 3}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i3.620}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43296}, pages = {115 -- 122}, abstract = {Matthias Bernt und Andrej Holm weisen zu Recht darauf hin, dass es einer Forschung zu ostdeutschen St{\"a}dten als konzeptionell eigenst{\"a}ndigem Feld bedarf, die die spezifische Verr{\"a}umlichung des tiefgreifenden gesellschaftlichen Transformationsprozesses nach 1990 ins Zentrum stellt. Dabei betrachten sie insbesondere das Feld des Wohnens als produktiv, um Kenntnis {\"u}ber die Struktur und Wirkung dieses Prozesses zu erlangen. Allerdings bleiben sie vage dabei, wie eine solche spezifisch auf Ostdeutschland gerichtete Wohnungsforschung zu konzipieren w{\"a}re und in welcher Weise die Besonderheiten und Parallelit{\"a}ten ostdeutscher Entwicklungen zu den Transformationen von Wohnungs- und Stadtentwicklungspolitik in Westdeutschland, aber auch international, in Bezug zu setzen w{\"a}ren.}, subject = {Deutschland <{\"O}stliche L{\"a}nder>}, language = {de} } @article{Schoenig, author = {Sch{\"o}nig, Barbara}, title = {Paradigm Shifts in Social Housing After Welfare-State Transformation : Learning from the German Experience}, series = {International Journal of Urban and Regional Research}, volume = {2020}, journal = {International Journal of Urban and Regional Research}, publisher = {John Wiley \& Sons}, doi = {10.1111/1468-2427.12914}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200709-41966}, pages = {18}, abstract = {Welfare-state transformation and entrepreneurial urban politics in Western welfare states since the late 1970s have yielded converging trends in the transformation of the dominant Fordist paradigm of social housing in terms of its societal function and institutional and spatial form. In this article I draw from a comparative case study on two cities in Germany to show that the resulting new paradigm is simultaneously shaped by the idiosyncrasies of the country's national housing regime and local housing policies. While German governments have successively limited the societal function of social housing as a legitimate instrument only for addressing exceptional housing crises, local policies on providing and organizing social housing within this framework display significant variation. However, planning and design principles dominating the spatial forms of social housing have been congruent. They may be interpreted as both an expression of the marginalization of social housing within the restructured welfare housing regime and a tool of its implementation according to the logics of entrepreneurial urban politics.}, subject = {Deutschland}, language = {en} } @incollection{Schnurbein, author = {Schnurbein, Stefanie von}, title = {Mehr als Anerkennung. Das Schreiblabor als Resonanzraum und Assemblage}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4265}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42656}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {141 -- 164}, abstract = {Ein "how to" von Schreibtechniken f{\"u}r Seminare und Kolloquien.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @phdthesis{Schmitz, author = {Schmitz, Tonia Annick}, title = {Entwicklung und Bilanzierung eines Photobioreaktorsystems zur Makroalgenkultivierung am Standort einer landwirtschaftlichen Biogasanlage}, doi = {10.25643/bauhaus-universitaet.4177}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200604-41774}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {220}, abstract = {Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe f{\"u}r die Verwendung als Energietr{\"a}ger, Nahrungsmittel oder als Ausgangsstoff f{\"u}r Pharmazeutika. Dass die Quantit{\"a}t und Qualit{\"a}t der in nat{\"u}rlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und k{\"u}stennahen Aquakulturen in Europa gegenw{\"a}rtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabh{\"a}ngige Algenproduktion zu erm{\"o}glichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt. Im Ergebnis wird f{\"u}r den gegenw{\"a}rtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz f{\"u}r die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz f{\"u}r die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erh{\"o}ht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf j{\"a}hrlich 460.869€ f{\"u}r Ulva intestinalis, 4.010€ f{\"u}r Fucus vesiculosus und 16.913€ f{\"u}r Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gez{\"u}chteten Gr{\"u}nalge Ulva intestinalis anzustreben und die Produktivit{\"a}t der Zuchtanlage im Sinne des Optimalszenarios zu steigern.}, subject = {Makroalgen}, language = {de} } @article{SchirmerOsburg, author = {Schirmer, Ulrike and Osburg, Andrea}, title = {A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study}, series = {SN Applied Sciences}, volume = {2020}, journal = {SN Applied Sciences}, number = {Volume 2, article 2061}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42452-020-03825-5}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44729}, pages = {1 -- 11}, abstract = {The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG-MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG-MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower.}, subject = {Zement}, language = {en} } @article{SaqlaiGhaniKhanetal., author = {Saqlai, Syed Muhammad and Ghani, Anwar and Khan, Imran and Ahmed Khan Ghayyur, Shahbaz and Shamshirband, Shahaboddin and Nabipour, Narjes and Shokri, Manouchehr}, title = {Image Analysis Using Human Body Geometry and Size Proportion Science for Action Classification}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {volume 10, issue 16, article 5453}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10165453}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200904-42322}, pages = {24}, abstract = {Gestures are one of the basic modes of human communication and are usually used to represent different actions. Automatic recognition of these actions forms the basis for solving more complex problems like human behavior analysis, video surveillance, event detection, and sign language recognition, etc. Action recognition from images is a challenging task as the key information like temporal data, object trajectory, and optical flow are not available in still images. While measuring the size of different regions of the human body i.e., step size, arms span, length of the arm, forearm, and hand, etc., provides valuable clues for identification of the human actions. In this article, a framework for classification of the human actions is presented where humans are detected and localized through faster region-convolutional neural networks followed by morphological image processing techniques. Furthermore, geometric features from human blob are extracted and incorporated into the classification rules for the six human actions i.e., standing, walking, single-hand side wave, single-hand top wave, both hands side wave, and both hands top wave. The performance of the proposed technique has been evaluated using precision, recall, omission error, and commission error. The proposed technique has been comparatively analyzed in terms of overall accuracy with existing approaches showing that it performs well in contrast to its counterparts.}, subject = {Bildanalyse}, language = {en} } @phdthesis{Salavati, author = {Salavati, Mohammad}, title = {Multi-Scale Modeling of Mechanical and Electrochemical Properties of 1D and 2D Nanomaterials, Application in Battery Energy Storage Systems}, doi = {10.25643/bauhaus-universitaet.4183}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200623-41830}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {166}, abstract = {Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods. Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method. Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD. Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schr{\"o}dinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA. The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries. Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials.}, subject = {Batterie}, language = {en} } @article{SadeghzadehMaddahAhmadietal., author = {Sadeghzadeh, Milad and Maddah, Heydar and Ahmadi, Mohammad Hossein and Khadang, Amirhosein and Ghazvini, Mahyar and Mosavi, Amir Hosein and Nabipour, Narjes}, title = {Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network}, series = {Nanomaterials}, volume = {2020}, journal = {Nanomaterials}, number = {Volume 10, Issue 4, 697}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/nano10040697}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200421-41308}, abstract = {In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol-gel method. The results indicated that 1.5 vol.\% of nanofluids enhanced the thermal conductivity by up to 25\%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable. View Full-Text}, subject = {W{\"a}rmeleitf{\"a}higkeit}, language = {en} } @article{SaadatfarKhosraviHassannatajJoloudarietal., author = {Saadatfar, Hamid and Khosravi, Samiyeh and Hassannataj Joloudari, Javad and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {A New K-Nearest Neighbors Classifier for Big Data Based on Efficient Data Pruning}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {volume 8, issue 2, article 286}, publisher = {MDPI}, doi = {10.3390/math8020286}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200225-40996}, pages = {12}, abstract = {The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Roeder, author = {R{\"o}der, Nina}, title = {Formen des Lassens: Performative Strategien der Bildwerdung in der Inszenierten Fotografie}, doi = {10.25643/bauhaus-universitaet.4214}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200817-42142}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {149}, abstract = {Der Forschungsgegenstand dieser Arbeit basiert auf einer ph{\"a}nomenologischen Beobachtung internationaler fotografischer Positionen des Selbstportraits, welche seit den 1960er-Jahren verwandte Inhalte, gleichartige bild{\"a}sthetische Merkmale und {\"a}hnliche Prozesse im fotografischen Herstellungsprozess aufweisen. Gemeinsam haben die in dieser Arbeit besprochenen K{\"u}nstler*innen, dass sich ihre Bildwerdung am eigenen K{\"o}rper vollzieht und an einen durch Bewegung gekennzeichneten Handlungsablauf gekn{\"u}pft ist. Die jeweilige Bildsprache weist eine ephemere {\"A}sthetik aus, in welcher inhaltlich sowohl der physische als auch der philosophisch gemeinte Begriff des (Los-)lassens eine Rolle spielt. Die k{\"u}nstlerischen Positionen, die Gegenstand dieser Ph.D.-Arbeit sind, umfassen Arbeiten von Bas Jan Ader (1942 - 1975), Francesca Woodman (1958 - 1981), Bernhard (1937 - 2011) und Anna Blume (*1937), Antoine d'Agata (*1961) und Tom Pope (*1986).}, subject = {Fotografie}, language = {de} } @phdthesis{Rost, author = {Rost, Grit}, title = {Entwicklung eines Toolboxmodells als Planungswerkzeug f{\"u}r ein transdisziplin{\"a}res Wasserressourcenmanagement am Beispiel der Stadt Darkhan, Mongolei}, publisher = {Rhombus}, address = {Berlin}, isbn = {978-3-941216-94-5}, doi = {10.25643/bauhaus-universitaet.4287}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201113-42874}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {172}, abstract = {Im Rahmen der Dissertation wurde ein Toolboxmodell f{\"u}r transdisziplin{\"a}res Wasserressourcenmanagement entwickelt. Das Modell liefert den methodischen Rahmen Wasserressourcen nachhaltig und transdisziplin{\"a}r zu bewirtschaften. Der Begriff der Nachhaltigkeit und eine Konkretisierung der nachhaltigen Bewirtschaftung globaler Wasserressourcen scheinen un{\"u}berschaubar und suggerieren die Forderung nach einer neuen Weltformel. Die globale Bedeutung der Wasserressourcen, die f{\"u}r Regionen spezifischen Besonderheiten des nat{\"u}rlichen Wasserhaushalts und der anthropogenen Nutzung, die Zeitskala und die Kontextualisierung in alle betroffenen und benachbarten Disziplinen deuten auf die Komplexit{\"a}t der Thematik hin. Es wird eine Systematisierung des Planungsprozesses von Wasserressourcen notwendig, anhand derer eine holistische Herangehensweise mit einer Strategieentwicklung f{\"u}r Regionen spezifischer Schwerpunktprobleme erfolgt. Ziel der Arbeit ist die Erarbeitung einer Strategie zur Systematisierung nach diesen Forderungen und die Bereitstellung eines Toolboxmodelles als Planungswerkzeug f{\"u}r das transdisziplin{\"a}re Wasserressourcenmanagement. Das Toolboxmodell stellt den konzeptionellen Rahmen f{\"u}r die Bewirtschaftung von Wasserressourcen mit der Anwendung transdisziplin{\"a}rer Forschungsmethoden bereit. Wesentliche Herausforderung bei der Anwendung der transdisziplin{\"a}ren Methode sind die Implementierung verschiedener Skalenbereiche, der Umgang mit der Komplexit{\"a}t von Daten, das Bewahren von Transparenz und Objektivit{\"a}t sowie die Erm{\"o}glichung eines auf andere Regionen {\"u}bertragbaren Planungsprozesses. Die theoretischen Grundlagen naturwissenschaftlicher Forschung zur Nachhaltigkeit haben ihren Ursprung in den biologischen und geographischen Disziplinen. Das Ineinandergreifen naturr{\"a}umlicher Zusammenh{\"a}nge und der Einfluss anthropogener Nutzung und technischer Innovationen auf den Naturhaushalt sind Kern der Kausalit{\"a}t {\"u}bergreifenden Denkens und Verstehens. Mit dem Ansatz des integrierten Wasserressourcenmanagements (IWRM) erfolgt die Ber{\"u}cksichtigung wirtschaftlicher und sozio{\"o}konomischer Ziele in den Planungsprozess f{\"u}r {\"o}kologisch nachhaltige Wasserwirtschaft. Das Instrument der Wasserrahmenrichtlinie (EU-WRRL) ist auf eine Gew{\"a}sser{\"o}kologie ausgerichtete Richtlinie, welche die Integration verschiedener Interessenvertreter in den Planungsprozess vorsieht. Das Konzept der neuartigen Sanit{\"a}rsysteme basiert auf Stofffl{\"u}ssen zwischen konkurrierenden Handlungsbereichen, wie Abfall-, Ressourcen- und Landwirtschaft. Den integrierten Ans{\"a}tzen fehlt eine {\"u}bergeordnete gemeinsame Zielstrategie - eine sogenannte Phase Null. Diese Phase Null - das Lernen aller 7 Zusammenfassung 157 relevanten, konkurrierenden und harmonisierenden Handlungsfelder eines Planungshorizontes wird durch eine transdisziplin{\"a}re Perspektive erm{\"o}glicht. W{\"a}hrend bei der integralen Perspektive eine disziplinorientierte Kooperation im Vordergrund steht, verlangt die transdisziplin{\"a}re Perspektive nach einer problemorientierten Kooperation zwischen den Interessenvertretern (Werlen 2015). Die bestehenden Konzepte und Richtlinien f{\"u}r das nachhaltige Management von Wasserressourcen sind etabliert und evaluiert. Der Literatur zur Folge ist eine Weiterentwicklung nach der Perspektive der Transdisziplinarit{\"a}t erforderlich. Das Toolboxmodell f{\"u}r integrales Wasserressourcenmanagement entspricht einem Planungstool bestehend aus Werkzeugen f{\"u}r die Anwendung wissenschaftlicher Methoden. Die Zusammenstellung der Methoden/Werkzeuge erf{\"u}llt im Rahmen die Methode transdisziplin{\"a}rer Forschung. Das Werkzeug zum Aufstellen der relevanten Handlungsfelder umfasst die Charakterisierung eines Untersuchungsgebietes und Planungsrahmens, die kausale Verkn{\"u}pfung des Bewirtschaftungskonzeptes und konkurrierender sowie sich unterst{\"u}tzender Stakeholder. Mit dem Werkzeug der Kontextualisierung und Indikatorenaufstellung wird eine Methode der stufenweisen und von einer Skala unabh{\"a}ngigen Bewertung des Umweltzustandes f{\"u}r die Zielpriorisierung vorgenommen. Damit wird das Toolboxmodell dem Problem der Komplexit{\"a}t und Datenverf{\"u}gbarkeit gerecht. Anhand der eingesetzten ABC Methode, werden die Bewertungsgr{\"o}ßen differenziert strukturiert auf verschiedene Skalen und Datenressourcen (A=Ersterkennung,B=Zeigerwerte, C=Modell/Index). Die ABC-Methode erm{\"o}glicht die Planung bereits mit unsicherer und l{\"u}ckenhafter Datengrundlage, ist jederzeit erweiterbar und bietet somit eine operative Wissensgenerierung w{\"a}hrend des Gestaltungsprozesses. F{\"u}r das Werkzeug zur Bewertung und Priorisierung wird der Algorithmus der Composite Programmierung angewandt. Diese Methode der Mehrfachzielplanung erf{\"u}llt den Anspruch der permanenten Erweiterbarkeit und der transparenten und objektiven Entscheidungsfindung. Die Komplexit{\"a}t des transdisziplin{\"a}ren Wasserressourcenmanagements kann durch die Methode der Composite Programmierung systematisiert werden. Das wesentliche Ergebnis der Arbeit stellt die erfolgreiche Erarbeitung und Anwendung des Tool-boxmodells f{\"u}r das transdisziplin{\"a}re Wasserressourcenmanagement im Untersuchungsgebiet Stadt Darkhan in der Mongolei dar. Auf Grund seiner besonderen hydrologischen und strukturellen Situa-tion wird die Relevanz eines nachhaltigen Bewirtschaftungskonzeptes deutlich. Im Rahmen des Querschnittsmoduls des MoMo-Projektes wurde eine f{\"u}r das Toolboxmodell geeignete Datengrundlage erarbeitet. Planungsrelevante Handlungsfelder wurden im Rahmen eines Workshops mit verschiedenen Interessenvertretern erarbeitet. Im Ergebnis dessen wurde die Systematik eines Zielbaumes mit Hauptzielen und untergeordneten Teilzielen als Grundlage der Priorisierung nach den holistischen Anspruch der transdisziplin{\"a}ren Forschung aufgestellt. F{\"u}r die Messbarkeit, in-wieweit Teilziele erreicht sind oder Handlungsbedarf besteht, wurden Indikatoren erarbeitet. Die Indikatoren-Aufstellung erfolgte exemplarisch f{\"u}r das Handlungsfeld Siedlungswasserwirtschaft in allen Skalen des ABC-Systems. Die im BMBF-MoMo Projekt generierte umfassende Datengrundlage erm{\"o}glichte die Anwendung und Evaluierung des Toolboxmodells mit unterschiedlichem quantitativem und qualitativem Dateninput. Verschiedene Kombination von A (Ersterkennung), B (Zeigerwerte) und C (Modell/Index) als Grundlage der Priorisierung mit der Compostite Programmierung erm{\"o}glichten die Durchf{\"u}hrung und Bewertung des transdisziplin{\"a}ren Planungstools. Die er-mittelten Rangfolgen von Teilzielen mit unterschiedlichen Bewertungsvarianten ergaben {\"a}hnliche Tendenzen. Das ist ein Hinweis daf{\"u}r, dass f{\"u}r die zuk{\"u}nftige Anwendung des Toolboxmodells die operative Wissensgenerierung, d.h. das schrittweise Hinzuf{\"u}gen neu ermittelter, gesicherterer Daten, funktioniert. Eine schwierige Datenverf{\"u}gbarkeit oder eine noch im Prozess befindliche wissenschaftliche Analyse sollen keine Hindernisse f{\"u}r eine schrittweise und erweiterbare Zielpriorisierung und Maßnahmenplanung sein. Trotz der Komplexit{\"a}t des transdisziplin{\"a}ren Ansatzes wird durch die Anwendung des Toolboxmodells eine effiziente und zielorientierte Handlungspriorisierung erm{\"o}glicht. Die Effizienz wird erreicht durch ressourcenschonende und flexible, Ziel fokussierte Datenermittlung. Zeit und Kosten im Planungsprozess k{\"o}nnen eingespart werden. Die erzielte Priorisierung von letztlich Handlungsempfehlungen erfolgt individuell auf die Eigenart des Untersuchungsgebietes angepasst, was hinsichtlich seiner Wirkung als erfolgsversprechend gilt.}, subject = {Wasserreserve}, language = {de} } @inproceedings{RinsdorfBuschow, author = {Rinsdorf, Lars and Buschow, Christopher}, title = {Validit{\"a}t durch Agilit{\"a}t: Methodische Implikationen einerpraxistheoretisch fundierten Medieninnovationsforschung}, series = {Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medien{\"o}konomie der DGPUK 2019, K{\"o}ln}, booktitle = {Innovation in der Medienproduktion und -distribution - Proceedings der Jahrestagung der Fachgruppe Medien{\"o}konomie der DGPUK 2019, K{\"o}ln}, editor = {Wellbrock, Christian and Zabel, Christian}, publisher = {SSOAR - Social Science Open Access Repository}, address = {Stuttgart}, organization = {Deutsche Gesellschaft f{\"u}r Publizistik- und Kommunikationswissenschaft e.V.}, doi = {10.25643/bauhaus-universitaet.4187}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200630-41874}, pages = {15}, abstract = {Das Innovationsmanagement von Medienorganisationen unterliegt derzeit erheblichen Ver{\"a}nderungen: Im ver{\"a}nderten Marktumfeld erweisen sich Flexibilit{\"a}t, schnelle Richtungswechsel und Anpassungsf{\"a}higkeit als zentral. Darauf muss auch die Medienmanagement-Forschung reagieren: Um die Agilit{\"a}t der gegenw{\"a}rtigen Unternehmenspraxis valide zu erforschen, ist eine ebenso agile, adaptive Forschung gefordert. Zu diesem Zweck schl{\"a}gt der Beitrag eine praxistheoretische Perspektive auf das Innovationsmanagement von Medienorganisationen vor. Empirische Forschungsdesigns, die aus einem solchen Zugriff resultieren, werden sowohl hinsichtlich ihrer methodischen Herausforderungen als auch ihres Forschungsprojektmanagements diskutiert. Der Beitrag greift außerdem neue M{\"o}glichkeitsr{\"a}ume des wissenschaftlichen Publizierens, des Universit{\"a}tsmanagements sowie der Forschungsorganisation auf, die praxistheoretisch gegr{\"u}ndete, empirische Innovationsforschung in der Medienwirtschaft einfordert.}, subject = {Medien{\"o}konomie}, language = {de} } @incollection{Reinartz, author = {Reinartz, Juli}, title = {Der perfekte Bankraub}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {B}, doi = {10.25643/bauhaus-universitaet.4259}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42591}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {209 -- 231}, abstract = {Finanzielle Unabh{\"a}ngigkeit, {\"u}berleben k{\"o}nnen, Superheld*in oder Pop-Star sein, Adrenalin-Kick, lebenslange Kompliz*innenschaft und ewige romanti- sche Verbundenheit, Verschw{\"o}rung, siegreiches {\"U}ber- listen, T{\"a}uschungstechniken - die Fantasien, die sich um die Idee des Bankraubs ranken, sind so verschieden wie die Menschen, die sie haben. Ein Bank{\"u}berfall ist wahrscheinlich der Traum Vieler, angesichts der zuneh- menden Prekarisierung pers{\"o}nlicher {\"O}konomien und - gleichzeitig oder gerade deswegen - ein spektakulari- siertes, fast popkulturelles Ereignis, das in den Medien gut dokumentiert und in unz{\"a}hligen Filmen illustriert und weitergesponnen wird.}, subject = {Theater}, language = {de} } @article{ReichertOlneyLahmer, author = {Reichert, Ina and Olney, Peter and Lahmer, Tom}, title = {Combined approach for optimal sensor placement and experimental verification in the context of tower-like structures}, series = {Journal of Civil Structural Health Monitoring}, volume = {2021}, journal = {Journal of Civil Structural Health Monitoring}, number = {volume 11}, publisher = {Heidelberg}, address = {Springer}, doi = {10.1007/s13349-020-00448-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44701}, pages = {223 -- 234}, abstract = {When it comes to monitoring of huge structures, main issues are limited time, high costs and how to deal with the big amount of data. In order to reduce and manage them, respectively, methods from the field of optimal design of experiments are useful and supportive. Having optimal experimental designs at hand before conducting any measurements is leading to a highly informative measurement concept, where the sensor positions are optimized according to minimal errors in the structures' models. For the reduction of computational time a combined approach using Fisher Information Matrix and mean-squared error in a two-step procedure is proposed under the consideration of different error types. The error descriptions contain random/aleatoric and systematic/epistemic portions. Applying this combined approach on a finite element model using artificial acceleration time measurement data with artificially added errors leads to the optimized sensor positions. These findings are compared to results from laboratory experiments on the modeled structure, which is a tower-like structure represented by a hollow pipe as the cantilever beam. Conclusively, the combined approach is leading to a sound experimental design that leads to a good estimate of the structure's behavior and model parameters without the need of preliminary measurements for model updating.}, subject = {Strukturmechanik}, language = {en} } @phdthesis{Reformat, author = {Reformat, Martin}, title = {Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften}, isbn = {978-3-00-067121-0}, doi = {10.25643/bauhaus-universitaet.4279}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201102-42794}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {224}, abstract = {Die Mahlung als Zerkleinerungsprozess stellt seit den Anf{\"a}ngen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, {\"u}ber das Aufschließen von Heilkr{\"a}utern in M{\"o}rsern bis hin zur Herstellung von Tonern f{\"u}r Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein {\"o}kologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden f{\"u}r Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben r{\"u}ckt. Die Komplexit{\"a}t der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit" ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ans{\"a}tzen gefertigt. Dar{\"u}ber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsf{\"a}hige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erf{\"u}llt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei {\"u}bergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und H{\"u}ttensand angestellt. Um eine m{\"o}glichst effektive Mahlung von Zement und Kompositmaterialien zu gew{\"a}hrleisten, ist es wichtig, die Auswirkung von M{\"u}hlenparametern zu kennen. Hierf{\"u}r wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlk{\"o}rperm{\"u}hlen und mahlk{\"o}rperlosen M{\"u}hlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengef{\"u}ge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker f{\"u}hrten ung{\"u}nstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementpr{\"u}fungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und R{\"u}hrwerkskugelm{\"u}hle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie H{\"u}ttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zus{\"a}tzliche Reaktivit{\"a}t bei gleicher Granulometrie gegen{\"u}ber der herk{\"o}mmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem H{\"u}ttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberfl{\"a}chenvergr{\"o}ßerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erh{\"o}hung der Reaktivit{\"a}t zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberfl{\"a}chendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivit{\"a}tsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgef{\"u}hrt. Im Speziellen wurde untersucht, inwieweit eine R{\"u}ckf{\"u}hrung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf m{\"o}glich ist. Die hierf{\"u}r verwendete Mahltechnik umfasst sowohl konventionelle M{\"u}hlen als auch Hochenergiem{\"u}hlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualit{\"a}t wurde der sogenannte „Aktivierungskoeffizient" eingef{\"u}hrt. Es stellte sich heraus, dass die R{\"u}ckf{\"u}hrung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abh{\"a}ngt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegen{\"u}ber dem mit Gesteinsk{\"o}rnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationsw{\"a}rmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen M{\"u}hlen aufbereitet. Die hier erzielten Ergebnisse k{\"o}nnen teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend.}, subject = {Zement}, language = {de} } @phdthesis{RadmardRahmani, author = {Radmard Rahmani, Hamid}, title = {Artificial Intelligence Approach for Seismic Control of Structures}, doi = {10.25643/bauhaus-universitaet.4135}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200417-41359}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Abstract In the first part of this research, the utilization of tuned mass dampers in the vibration control of tall buildings during earthquake excitations is studied. The main issues such as optimizing the parameters of the dampers and studying the effects of frequency content of the target earthquakes are addressed. Abstract The non-dominated sorting genetic algorithm method is improved by upgrading generic operators, and is utilized to develop a framework for determining the optimum placement and parameters of dampers in tall buildings. A case study is presented in which the optimal placement and properties of dampers are determined for a model of a tall building under different earthquake excitations through computer simulations. Abstract In the second part, a novel framework for the brain learning-based intelligent seismic control of smart structures is developed. In this approach, a deep neural network learns how to improve structural responses during earthquake excitations using feedback control. Abstract Reinforcement learning method is improved and utilized to develop a framework for training the deep neural network as an intelligent controller. The efficiency of the developed framework is examined through two case studies including a single-degree-of-freedom system and a high-rise building under different earthquake excitation records. Abstract The results show that the controller gradually develops an optimum control policy to reduce the vibrations of a structure under an earthquake excitation through a cyclical process of actions and observations. Abstract It is shown that the controller efficiently improves the structural responses under new earthquake excitations for which it was not trained. Moreover, it is shown that the controller has a stable performance under uncertainties.}, subject = {Erdbeben}, language = {en} } @phdthesis{Rabizadeh, author = {Rabizadeh, Ehsan}, title = {Goal-oriented A Posteriori Error Estimation and Adaptive Mesh Refinement in 2D/3D Thermoelasticity Problems}, doi = {10.25643/bauhaus-universitaet.4286}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201113-42864}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {In recent years, substantial attention has been devoted to thermoelastic multifield problems and their numerical analysis. Thermoelasticity is one of the important categories of multifield problems which deals with the effect of mechanical and thermal disturbances on an elastic body. In other words, thermoelasticity encompasses the phenomena that describe the elastic and thermal behavior of solids and their interactions under thermo-mechanical loadings. Since providing an analytical solution for general coupled thermoelasticity problems is mathematically complicated, the development of alternative numerical solution techniques seems essential. Due to the nature of numerical analysis methods, presence of error in results is inevitable, therefore in any numerical simulation, the main concern is the accuracy of the approximation. There are different error estimation (EE) methods to assess the overall quality of numerical approximation. In many real-life numerical simulations, not only the overall error, but also the local error or error in a particular quantity of interest is of main interest. The error estimation techniques which are developed to evaluate the error in the quantity of interest are known as "goal-oriented" error estimation (GOEE) methods. This project, for the first time, investigates the classical a posteriori error estimation and goal-oriented a posteriori error estimation in 2D/3D thermoelasticity problems. Generally, the a posteriori error estimation techniques can be categorized into two major branches of recovery-based and residual-based error estimators. In this research, application of both recovery- and residual-based error estimators in thermoelasticity are studied. Moreover, in order to reduce the error in the quantity of interest efficiently and optimally in 2D and 3D thermoelastic problems, goal-oriented adaptive mesh refinement is performed. As the first application category, the error estimation in classical Thermoelasticity (CTE) is investigated. In the first step, a rh-adaptive thermo-mechanical formulation based on goal-oriented error estimation is proposed.The developed goal-oriented error estimation relies on different stress recovery techniques, i.e., the superconvergent patch recovery (SPR), L2-projection patch recovery (L2-PR), and weighted superconvergent patch recovery (WSPR). Moreover, a new adaptive refinement strategy (ARS) is presented that minimizes the error in a quantity of interest and refines the discretization such that the error is equally distributed in the refined mesh. The method is validated by numerous numerical examples where an analytical solution or reference solution is available. After investigating error estimation in classical thermoelasticity and evaluating the quality of presented error estimators, we extended the application of the developed goal-oriented error estimation and the associated adaptive refinement technique to the classical fully coupled dynamic thermoelasticity. In this part, we present an adaptive method for coupled dynamic thermoelasticity problems based on goal-oriented error estimation. We use dimensionless variables in the finite element formulation and for the time integration we employ the acceleration-based Newmark-_ method. In this part, the SPR, L2-PR, and WSPR recovery methods are exploited to estimate the error in the quantity of interest (QoI). By using adaptive refinement in space, the error in the quantity of interest is minimized. Therefore, the discretization is refined such that the error is equally distributed in the refined mesh. We demonstrate the efficiency of this method by numerous numerical examples. After studying the recovery-based error estimators, we investigated the residual-based error estimation in thermoelasticity. In the last part of this research, we present a 3D adaptive method for thermoelastic problems based on goal-oriented error estimation where the error is measured with respect to a pointwise quantity of interest. We developed a method for a posteriori error estimation and mesh adaptation based on dual weighted residual (DWR) method relying on the duality principles and consisting of an adjoint problem solution. Here, we consider the application of the derived estimator and mesh refinement to two-/three-dimensional (2D/3D) thermo-mechanical multifield problems. In this study, the goal is considered to be given by singular pointwise functions, such as the point value or point value derivative at a specific point of interest (PoI). An adaptive algorithm has been adopted to refine the mesh to minimize the goal in the quantity of interest. The mesh adaptivity procedure based on the DWR method is performed by adaptive local h-refinement/coarsening with allowed hanging nodes. According to the proposed DWR method, the error contribution of each element is evaluated. In the refinement process, the contribution of each element to the goal error is considered as the mesh refinement criterion. In this study, we substantiate the accuracy and performance of this method by several numerical examples with available analytical solutions. Here, 2D and 3D problems under thermo-mechanical loadings are considered as benchmark problems. To show how accurately the derived estimator captures the exact error in the evaluation of the pointwise quantity of interest, in all examples, considering the analytical solutions, the goal error effectivity index as a standard measure of the quality of an estimator is calculated. Moreover, in order to demonstrate the efficiency of the proposed method and show the optimal behavior of the employed refinement method, the results of different conventional error estimators and refinement techniques (e.g., global uniform refinement, Kelly, and weighted Kelly techniques) are used for comparison.}, subject = {Mesh Refinement}, language = {en} } @misc{Pessoa, type = {Master Thesis}, author = {Pessoa, Suelen}, title = {Why do the Archives archive? A journey from the hunko to the counter-ethnography and back}, doi = {10.25643/bauhaus-universitaet.4328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210112-43280}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {A complex artistic research on the theme of cultural heritage and (neo)colonial processes of material and immaterial expropriation. Starting from the encounter with a phonographic relic at the Berliner Phonogramm-Archiv, the artist embarks on a journey to her own roots embodied in the practice of the Afro-Brazilian religion Candombl{\´e}. In the form of a theoretical treatise, an archive (photos, diagrams, maps, newspaper clippings, letters, documents), as well as a sound performance in the public space of the city of Weimar, several theoretical and performative elements are brought together in this transmedia artistic research that proposes a true decolonial practice.}, subject = {K{\"u}nstlerische Forschung}, language = {en} } @inproceedings{PaulRodehorst, author = {Paul, Debus and Rodehorst, Volker}, title = {Multi-Scale Flight Path Planning for UAS Building Inspection}, series = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, volume = {2020}, booktitle = {Proceedings of the 18th International Conference on Computing in Civil and Building Engineering}, editor = {Santos, Toledo}, publisher = {Springer}, doi = {10.25643/bauhaus-universitaet.4205}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42053}, pages = {19}, abstract = {Unmanned aircraft systems (UAS) show large potential for the construction industry. Their use in condition assessment has increased significantly, due to technological and computational progress. UAS play a crucial role in developing a digital maintenance strategy for infrastructure, saving cost and effort, while increasing safety and reliability. Part of that strategy are automated visual UAS inspections of the building's condition. The resulting images can automatically be analyzed to identify and localize damages to the structure that have to be monitored. Further interest in parts of a structure can arise from events like accidents or collisions. Areas of low interest exist, where low resolution monitoring is sufficient. From different requirements for resolution, different levels of detail can be derived. They require special image acquisition parameters that differ mainly in the distance between camera and structure. Areas with a higher level of detail require a smaller distance to the object, producing more images. This work proposes a multi-scale flight path planning procedure, enabling higher resolution requirements for areas of special interest, while reducing the number of required images to a minimum. Careful selection of the camera positions maintains the complete coverage of the structure, while achieving the required resolution in all areas. The result is an efficient UAS inspection, reducing effort for the maintenance of infrastructure.}, subject = {Drohne}, language = {en} } @article{PartschefeldWiegandBellmannetal., author = {Partschefeld, Stephan and Wiegand, Torben and Bellmann, Frank and Osburg, Andrea}, title = {Formation of Geopolymers Using Sodium Silicate Solution and Aluminum Orthophosphate}, series = {Materials}, volume = {2020}, journal = {Materials}, number = {Volume 13, issue 18, article 4202}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma13184202}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43378}, pages = {1 -- 16}, abstract = {This paper reports the formation and structure of fast setting geopolymers activated by using three sodium silicate solutions with different modules (1.6, 2.0 and 2.4) and a berlinite-type aluminum orthophosphate. By varying the concentration of the aluminum orthophosphate, different Si/Al-ratios were established (6, 3 and 2). Reaction kinetics of binders were determined by isothermal calorimetric measurements at 20 °C. X-ray diffraction analysis as well as nuclear magnetic resonance (NMR) measurements were performed on binders to determine differences in structure by varying the alkalinity of the sodium silicate solutions and the Si/Al-ratio. The calorimetric results indicated that the higher the alkalinity of the sodium silicate solution, the higher the solubility and degree of conversion of the aluminum orthophosphate. The results of X-ray diffraction and Rietveldt analysis, as well as the NMR measurements, confirmed the assumption of the calorimetric experiments that first the aluminum orthophosphate was dissolved and then a polycondensation to an amorphous aluminosilicate network occurred. The different amounts of amorphous phases formed as a function of the alkalinity of the sodium silicate solution, indicate that tetrahydroxoaluminate species were formed during the dissolution of the aluminum orthophosphate, which reduce the pH value. This led to no further dissolution of the aluminum orthophosphate, which remained unreacted.}, subject = {Geopolymere}, language = {en} } @phdthesis{Oucif, author = {Oucif, Chahmi}, title = {Analytical Modeling of Self-Healing and Super Healing in Cementitious Materials}, doi = {10.25643/bauhaus-universitaet.4229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200831-42296}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {208}, abstract = {Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken. The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history. In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain. Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics. In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied.}, subject = {Schaden}, language = {en} } @phdthesis{Oevermann, author = {Oevermann, Heike}, title = {Historische Industriekomplexe in der Stadt}, doi = {10.25643/bauhaus-universitaet.4358}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210203-43582}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {168}, abstract = {Das Buch greift die enge Verkn{\"u}pfung von Industrialisierung und Urbanisierung auf, die in den letzten gut 250 Jahren Europas St{\"a}dte und ihre Stadtbaugeschichte maßgeblich gepr{\"a}gt hat. Damit stellen sich auch vielf{\"a}ltige Fragen und Aufgaben f{\"u}r die Denkmalpflege. Die Habilitationsschrift leistet einen Beitrag, um die stadtbaugeschichtlichen und stadtbildpr{\"a}genden Werte historischer Industriekomplexe zu erkennen und zu erhalten. Wie k{\"o}nnen wir die industriellen Stadtlandschaften erfassen? Wie gestalten wir Umnutzungen und Konversionen denkmalgerecht und beziehen im Rahmen eines Heritage-Managements Aspekte der nachhaltigen Stadtentwicklung ein?}, subject = {Denkmalpflege}, language = {de} } @phdthesis{Oevermann, author = {Oevermann, Heike}, title = {Historische Industriekomplexe in der Stadt}, doi = {10.25643/bauhaus-universitaet.4182}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200615-41822}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {161}, abstract = {Das Buch greift die enge Verkn{\"u}pfung von Industrialisierung und Urbanisierung auf, die in den letzten gut 250 Jahren Europas St{\"a}dte und ihre Stadtbaugeschichte maßgeblich gepr{\"a}gt hat. Damit stellen sich auch vielf{\"a}ltige Fragen und Aufgaben f{\"u}r die Denkmalpflege. Die Habilitationsschrift leistet einen Beitrag, um die stadtbaugeschichtlichen und stadtbildpr{\"a}genden Werte historischer Industriekomplexe zu erkennen und zu erhalten. Wie k{\"o}nnen wir die industriellen Stadtlandschaften erfassen? Wie gestalten wir Umnutzungen und Konversionen denkmalgerecht und beziehen im Rahmen eines Heritage-Managements Aspekte der nachhaltigen Stadtentwicklung ein?}, subject = {Denkmalpflege}, language = {de} } @article{NabipourMosaviBaghbanetal., author = {Nabipour, Narjes and Mosavi, Amir and Baghban, Alireza and Shamshirband, Shahaboddin and Felde, Imre}, title = {Extreme Learning Machine-Based Model for Solubility Estimation of Hydrocarbon Gases in Electrolyte Solutions}, series = {Processes}, volume = {2020}, journal = {Processes}, number = {Volume 8, Issue 1, 92}, publisher = {MDPI}, doi = {10.3390/pr8010092}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200113-40624}, pages = {12}, abstract = {Calculating hydrocarbon components solubility of natural gases is known as one of the important issues for operational works in petroleum and chemical engineering. In this work, a novel solubility estimation tool has been proposed for hydrocarbon gases—including methane, ethane, propane, and butane—in aqueous electrolyte solutions based on extreme learning machine (ELM) algorithm. Comparing the ELM outputs with a comprehensive real databank which has 1175 solubility points yielded R-squared values of 0.985 and 0.987 for training and testing phases respectively. Furthermore, the visual comparison of estimated and actual hydrocarbon solubility led to confirm the ability of proposed solubility model. Additionally, sensitivity analysis has been employed on the input variables of model to identify their impacts on hydrocarbon solubility. Such a comprehensive and reliable study can help engineers and scientists to successfully determine the important thermodynamic properties, which are key factors in optimizing and designing different industrial units such as refineries and petrochemical plants.}, subject = {Maschinelles Lernen}, language = {en} } @article{NabipourDehghaniMosavietal., author = {Nabipour, Narjes and Dehghani, Majid and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Short-Term Hydrological Drought Forecasting Based on Different Nature-Inspired Optimization Algorithms Hybridized With Artificial Neural Networks}, series = {IEEE Access}, volume = {2020}, journal = {IEEE Access}, number = {volume 8}, publisher = {IEEE}, doi = {10.1109/ACCESS.2020.2964584}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40796}, pages = {15210 -- 15222}, abstract = {Hydrological drought forecasting plays a substantial role in water resources management. Hydrological drought highly affects the water allocation and hydropower generation. In this research, short term hydrological drought forecasted based on the hybridized of novel nature-inspired optimization algorithms and Artificial Neural Networks (ANN). For this purpose, the Standardized Hydrological Drought Index (SHDI) and the Standardized Precipitation Index (SPI) were calculated in one, three, and six aggregated months. Then, three states where proposed for SHDI forecasting, and 36 input-output combinations were extracted based on the cross-correlation analysis. In the next step, newly proposed optimization algorithms, including Grasshopper Optimization Algorithm (GOA), Salp Swarm algorithm (SSA), Biogeography-based optimization (BBO), and Particle Swarm Optimization (PSO) hybridized with the ANN were utilized for SHDI forecasting and the results compared to the conventional ANN. Results indicated that the hybridized model outperformed compared to the conventional ANN. PSO performed better than the other optimization algorithms. The best models forecasted SHDI1 with R2 = 0.68 and RMSE = 0.58, SHDI3 with R 2 = 0.81 and RMSE = 0.45 and SHDI6 with R 2 = 0.82 and RMSE = 0.40.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Mueller, author = {M{\"u}ller, Jan Philip}, title = {Audiovision und Synchronisation. Sehen, H{\"o}ren und Gleichzeitigkeit in Anordnungen vom Observatorium {\"u}ber psychologische Experimente bis zum Tonfilm im 19. und 20. Jahrhundert}, doi = {10.25643/bauhaus-universitaet.4290}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201123-42906}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {516}, abstract = {In dieser Untersuchung wird eine Geschichte von Problemen der Gleichzeitigkeit zwischen Sehen und H{\"o}ren, beziehungsweise der Synchronit{\"a}t von Bild und Ton, bis zur Entstehung des Tonfilms rekonstruiert. Dabei werden Linien gezogen zwischen diskursiven Konfigurationen und medialen Anordnungen, in denen das Verh{\"a}ltnis von Sehen und H{\"o}ren oder Bild und Ton als zeitliches erscheint - in denen Sehen und H{\"o}ren, Bild und Ton zwischen Mannigfaltigkeit und Einheit verschmelzen, auseinanderfallen, interagieren, redundant oder spezifisch werden, einander erg{\"a}nzen, dominieren, verfehlen verdr{\"a}ngen, aufspalten… Tonfilm ist in der Kinogeschichte eben nicht nur eine Erg{\"a}nzung. Vielmehr {\"a}hnelt er dem Auftritt eines Gespensts, das das Wissen und die Techniken der Trennung der Sinne schon l{\"a}nger, vielleicht schon immer begleitet hatte. Das Auftreten des Tonfilms ist auch {\"u}berhaupt fr{\"u}her Anlass eines weitreichenden Diskurses dar{\"u}ber, was Audiovision eigentlich sein k{\"o}nnte und sollte. Noch allgemeiner k{\"o}nnte auch davon gesprochen werden, dass Tonfilm eins der ersten großen Projekte der Konvergenz technischer Medien ist, die heute - besonders angesichts des Computers - als entscheidender Aspekt von Mediengeschichte erscheint. Die Linien der Probleme von Gleichzeitigkeit/Ungleichzeitigkeit an den Schnittstellen von Wissen, Technik und {\"A}sthetik werden insbesondere durch drei Felder hindurch nachgezeichnet: 1) Die Geschichte von Intermodalit{\"a}t in Bezug auf die Frage nach Gleichzeitigkeit und Ungleichzeitigkeit als Problem und Gegenstand von Wissenschaft seit dem 19. Jahrhundert, vornehmlich in zwei Gebieten: Als Fehlerquelle im astronomischen Observatorium bei der Messung, Feststellung und Vereinheitlichung von Raum und Zeit, die auf individuelle Abweichungen Intermodaler Wahrnehmung verweist und als Problem der „pers{\"o}nlichen Gleichung" weit {\"u}ber die Astronomie hinaus Karriere macht. Als heiße Zone wahrnehmungspsychologischer Experimente und ihrer Apparate seit der Mitte des 19. Jahrhunderts, die mit dem Konzept der „Komplikation" Fragen nach einer Synthese der Sinneswahrnehmungen und damit letztlich nach der Selbstgegenwart des Menschen stellt. 2) Eine Technikgeschichte des Problems auditive und visuelle Zeitmedien - wie Phonograph und Film - zu koppeln, zu synchronisieren. Darin eskalieren zwei zeitkritische Relationen: Einerseits zwischen diskreter, intermittierender Bewegung des Films und stetiger, kontinuierlicher Bewegung des Phonographen, andererseits in Bezug darauf, an welcher Stelle - wo und wann - audiovisuelle Gegenwart des Kinos ensteht; oder auch verfehlt wird. 3) Eine Geschichte von Filmtheorie und -{\"a}sthetik, in der sich mit der Durchsetzung des Tonfilms um 1930 die Frage stellt, was dieses neue Medium sei und was damit zu tun. Diese Verhandlungen spannen sich zwischen dem formulierten Ziel einer spezifischen Illusion oder Pr{\"a}senz von Tonfilm durch Synchronit{\"a}t auf der einen Seite und der sich aus dem Verdacht des Betrugs durch Synchronit{\"a}t ergebenden Forderung nach „Asynchronismus" als kritischer Methode auf der anderen Seite auf. Ausgehend von der These, dass im 19. Jahrhundert die Sinne aufgeteilt werden, dann wird in diesen Anordnungen an irgendeiner Stelle Heterogenes gleichzeitig passieren. An welcher Stelle? Und was bedeuten diese (Un-)Gleichzeitigkeiten? Was dabei - sehr allgemein gesprochen - auf dem Spiel steht, sind M{\"o}glichkeiten einer audiovisuell geteilten - getrennten oder gemeinsamen - Welt und Gegenwart.}, subject = {Tonfilm}, language = {de} } @article{MousaviSteinkeJuniorTeixeiraetal., author = {Mousavi, Seyed Nasrollah and Steinke J{\´u}nior, Renato and Teixeira, Eder Daniel and Bocchiola, Daniele and Nabipour, Narjes and Mosavi, Amir and Shamshirband, Shahaboddin}, title = {Predictive Modeling the Free Hydraulic Jumps Pressure through Advanced Statistical Methods}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {Volume 8, Issue 3, 323}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math8030323}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41140}, pages = {16}, abstract = {Pressure fluctuations beneath hydraulic jumps potentially endanger the stability of stilling basins. This paper deals with the mathematical modeling of the results of laboratory-scale experiments to estimate the extreme pressures. Experiments were carried out on a smooth stilling basin underneath free hydraulic jumps downstream of an Ogee spillway. From the probability distribution of measured instantaneous pressures, pressures with different probabilities could be determined. It was verified that maximum pressure fluctuations, and the negative pressures, are located at the positions near the spillway toe. Also, minimum pressure fluctuations are located at the downstream of hydraulic jumps. It was possible to assess the cumulative curves of pressure data related to the characteristic points along the basin, and different Froude numbers. To benchmark the results, the dimensionless forms of statistical parameters include mean pressures (P*m), the standard deviations of pressure fluctuations (σ*X), pressures with different non-exceedance probabilities (P*k\%), and the statistical coefficient of the probability distribution (Nk\%) were assessed. It was found that an existing method can be used to interpret the present data, and pressure distribution in similar conditions, by using a new second-order fractional relationships for σ*X, and Nk\%. The values of the Nk\% coefficient indicated a single mean value for each probability.}, subject = {Maschinelles Lernen}, language = {en} } @article{MosaviShamshirbandEsmaeilbeikietal., author = {Mosavi, Amir and Shamshirband, Shahaboddin and Esmaeilbeiki, Fatemeh and Zarehaghi, Davoud and Neyshabouri, Mohammadreza and Samadianfard, Saeed and Ghorbani, Mohammad Ali and Nabipour, Narjes and Chau, Kwok-Wing}, title = {Comparative analysis of hybrid models of firefly optimization algorithm with support vector machines and multilayer perceptron for predicting soil temperature at different depths}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {Volume 14, Issue 1}, doi = {10.1080/19942060.2020.1788644}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200911-42347}, pages = {939 -- 953}, abstract = {This research aims to model soil temperature (ST) using machine learning models of multilayer perceptron (MLP) algorithm and support vector machine (SVM) in hybrid form with the Firefly optimization algorithm, i.e. MLP-FFA and SVM-FFA. In the current study, measured ST and meteorological parameters of Tabriz and Ahar weather stations in a period of 2013-2015 are used for training and testing of the studied models with one and two days as a delay. To ascertain conclusive results for validation of the proposed hybrid models, the error metrics are benchmarked in an independent testing period. Moreover, Taylor diagrams utilized for that purpose. Obtained results showed that, in a case of one day delay, except in predicting ST at 5 cm below the soil surface (ST5cm) at Tabriz station, MLP-FFA produced superior results compared with MLP, SVM, and SVM-FFA models. However, for two days delay, MLP-FFA indicated increased accuracy in predicting ST5cm and ST 20cm of Tabriz station and ST10cm of Ahar station in comparison with SVM-FFA. Additionally, for all of the prescribed models, the performance of the MLP-FFA and SVM-FFA hybrid models in the testing phase was found to be meaningfully superior to the classical MLP and SVM models.}, subject = {Bodentemperatur}, language = {en} } @article{MosaviShokriMansoretal., author = {Mosavi, Amir Hosein and Shokri, Manouchehr and Mansor, Zulkefli and Qasem, Sultan Noman and Band, Shahab S. and Mohammadzadeh, Ardashir}, title = {Machine Learning for Modeling the Singular Multi-Pantograph Equations}, series = {Entropy}, volume = {2020}, journal = {Entropy}, number = {volume 22, issue 9, article 1041}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/e22091041}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43436}, pages = {1 -- 18}, abstract = {In this study, a new approach to basis of intelligent systems and machine learning algorithms is introduced for solving singular multi-pantograph differential equations (SMDEs). For the first time, a type-2 fuzzy logic based approach is formulated to find an approximated solution. The rules of the suggested type-2 fuzzy logic system (T2-FLS) are optimized by the square root cubature Kalman filter (SCKF) such that the proposed fineness function to be minimized. Furthermore, the stability and boundedness of the estimation error is proved by novel approach on basis of Lyapunov theorem. The accuracy and robustness of the suggested algorithm is verified by several statistical examinations. It is shown that the suggested method results in an accurate solution with rapid convergence and a lower computational cost.}, subject = {Fuzzy-Regelung}, language = {en} } @article{MosaviQasemShokrietal., author = {Mosavi, Amir Hosein and Qasem, Sultan Noman and Shokri, Manouchehr and Band, Shahab S. and Mohammadzadeh, Ardashir}, title = {Fractional-Order Fuzzy Control Approach for Photovoltaic/Battery Systems under Unknown Dynamics, Variable Irradiation and Temperature}, series = {Electronics}, volume = {2020}, journal = {Electronics}, number = {Volume 9, issue 9, article 1455}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/electronics9091455}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43381}, pages = {1 -- 19}, abstract = {For this paper, the problem of energy/voltage management in photovoltaic (PV)/battery systems was studied, and a new fractional-order control system on basis of type-3 (T3) fuzzy logic systems (FLSs) was developed. New fractional-order learning rules are derived for tuning of T3-FLSs such that the stability is ensured. In addition, using fractional-order calculus, the robustness was studied versus dynamic uncertainties, perturbation of irradiation, and temperature and abruptly faults in output loads, and, subsequently, new compensators were proposed. In several examinations under difficult operation conditions, such as random temperature, variable irradiation, and abrupt changes in output load, the capability of the schemed controller was verified. In addition, in comparison with other methods, such as proportional-derivative-integral (PID), sliding mode controller (SMC), passivity-based control systems (PBC), and linear quadratic regulator (LQR), the superiority of the suggested method was demonstrated.}, subject = {Fuzzy-Logik}, language = {en} } @article{MengNomanQasemShokrietal., author = {Meng, Yinghui and Noman Qasem, Sultan and Shokri, Manouchehr and Shamshirband, Shahaboddin}, title = {Dimension Reduction of Machine Learning-Based Forecasting Models Employing Principal Component Analysis}, series = {Mathematics}, volume = {2020}, journal = {Mathematics}, number = {volume 8, issue 8, article 1233}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math8081233}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200811-42125}, pages = {15}, abstract = {In this research, an attempt was made to reduce the dimension of wavelet-ANFIS/ANN (artificial neural network/adaptive neuro-fuzzy inference system) models toward reliable forecasts as well as to decrease computational cost. In this regard, the principal component analysis was performed on the input time series decomposed by a discrete wavelet transform to feed the ANN/ANFIS models. The models were applied for dissolved oxygen (DO) forecasting in rivers which is an important variable affecting aquatic life and water quality. The current values of DO, water surface temperature, salinity, and turbidity have been considered as the input variable to forecast DO in a three-time step further. The results of the study revealed that PCA can be employed as a powerful tool for dimension reduction of input variables and also to detect inter-correlation of input variables. Results of the PCA-wavelet-ANN models are compared with those obtained from wavelet-ANN models while the earlier one has the advantage of less computational time than the later models. Dealing with ANFIS models, PCA is more beneficial to avoid wavelet-ANFIS models creating too many rules which deteriorate the efficiency of the ANFIS models. Moreover, manipulating the wavelet-ANFIS models utilizing PCA leads to a significant decreasing in computational time. Finally, it was found that the PCA-wavelet-ANN/ANFIS models can provide reliable forecasts of dissolved oxygen as an important water quality indicator in rivers.}, subject = {Maschinelles Lernen}, language = {en} } @misc{MendoncadeAlmeida, type = {Master Thesis}, author = {Mendon{\c{c}}a de Almeida, Karina}, title = {Why isn't Google welcome in Kreuzberg? Social movement and the effects of Internet on urban space}, doi = {10.25643/bauhaus-universitaet.4244}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200924-42446}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {132}, abstract = {Advances in information and communication technologies such as the Internet have driven a great transformation in the interactions between individuals and the urban environment. As the use of the Internet in cities becomes more intense and diverse, there is also a restructuring of urban space, which is experienced by groups in society in various ways, according to the specificity of each context. Accordingly, large Internet companies have emerged as new players in the processes of urbanization, either through partnerships with the public administration or through various services offered directly to urban residents. Once these corporations are key actors in the digitalization of urban services, their operations can affect the patterns of urban inequality and generate a series of new struggles over the production of space. Interested in analyzing this phenomena from the perspective of civil society, the present Master Thesis examined a social movement that prevented Google to settle a new startup campus in the district of Kreuzberg, in Berlin. By asking why Google was not welcome in that context, this study also sought to understand how internet, as well as its main operators, has affected everyday life in the city. Thus, besides analyzing the movement, I investigated the particularities of the urban context where it arose and the elements that distinguish the mobilization's opponent. In pursuit of an interdisciplinary approach, I analyzed and discussed the results of empirical research in dialogue with critical theories in the fields of urban studies and the Internet, with emphasis on Castells' definitions of urban social movements and network society (1983, 2009, 2015), Couldry's and Mejias' (2019) idea of data colonialism, Lef{\`e}bvre's (1991, 1996) concepts of abstract space and the right to the city, as well as Zuboff's (2019) theory of surveillance capitalism. The case at hand has exposed that Google plays a prominent role in the way the Internet has been developed and deployed in cities. From the perspective accessed, the current appropriation of Internet technologies has been detrimental to individual autonomy and has contributed to intensifying existing inequalities in the city. The alternative vision to this relies mainly on the promotion of decentralized solidarity networks.}, subject = {Soziale Bewegung}, language = {en} } @incollection{Massumi, author = {Massumi, Brian}, title = {Kollektiver Ausdruck: Eine radikale Pragmatik}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4256}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42561}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {187 -- 207}, abstract = {Das spekulative Handbuch bietet vielf{\"a}ltige Techniken f{\"u}r ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische {\"U}berlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einf{\"u}hrt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Bank{\"u}berf{\"a}llen, der Universit{\"a}t der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem K{\"o}rperstreik.}, subject = {Philosophie}, language = {de} } @phdthesis{Markert, author = {Markert, Michael}, title = {R{\"a}umliche Navigation durch richtungsgebundene Stereofonie}, doi = {10.25643/bauhaus-universitaet.4303}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201214-43038}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {394}, abstract = {Die Verbreitung mobiler Smartphones und besonders deren allgegenw{\"a}rtige Lokalisierungstechnologien ver{\"a}ndern das Navigationsverhalten im Raum nachhaltig. Parallel zur schnell voranschreitenden Entwicklung allt{\"a}glicher Ger{\"a}te, die mitgef{\"u}hrt werden, setzt der {\"U}bergang der bereits l{\"a}nger dauernden Entwicklung von Virtual-Reality-Technik in eine erweiterte und augmentierte Mixed Reality ein. In diesem Spannungsfeld untersucht die vorliegende Arbeit, inwieweit richtungsgebundene und binaural wiedergegebene Stereofonie die menschliche Bewegung im Raum beeinflussen kann und versucht zu er{\"o}rtern, welche Potenziale in der Wiederentdeckung einer relativ lange bekannten Technik liegen. Der Autor hat im Rahmen dieser Arbeit eine binaurale mobile Applikation f{\"u}r richtungsgebundene Stereofonie entwickelt, mit der virtuelle bewegte oder statische Audio-Hotspots im Raum platziert werden k{\"o}nnen. So kann links, rechts oder 30 Meter vor einer Person ein virtueller oder tats{\"a}chlicher Klang im Raum verortet sein. Durch die in Echtzeit berechnete binaurale Wiedergabe der Klangquellen mit einem Stereo-Kopfh{\"o}rer k{\"o}nnen diese r{\"a}umlich verorteten Kl{\"a}nge mit zwei Ohren dreidimensional wahrgenommen werden, {\"a}hnlich dem r{\"a}umlichen Sehen mit zwei Augen. Durch den Einsatz mehrerer lokalisierter Klangquellen als Soundscape entsteht eine augmentierte auditive Realit{\"a}t, die die physische Realit{\"a}t erweitert. Die Position und Navigation des Nutzers wird durch binaurale Lautst{\"a}rkenmodulation (die Lautst{\"a}rke nimmt bei abnehmender Distanz zur Quelle zu) und Stereopanning mit Laufzeitmodulation (die Richtung wird {\"u}ber ein Stereosignal auf beiden Ohren r{\"a}umlich links-rechts-vorne verortet) interaktiv und kybernetisch beeinflusst. Die Nutzer navigieren — durch ihr Interesse an den h{\"o}rbaren virtuellen Klangquellen geleitet — durch einen dynamisch erzeugten, dreidimensionalen akustischen Raum, der gleichzeitig ein virtueller und kybernetischer Raum ist, da die Repr{\"a}sentation der Kl{\"a}nge an die Bewegung und Ausrichtung der Nutzer im Raum angepasst wird. Diese Arbeit untersucht, ob die Bewegung von Menschen durch (virtuelle) Kl{\"a}nge beeinflusst werden kann und wie groß oder messbar dieser Einfluss ist. Dabei k{\"o}nnen nicht alle k{\"u}nstlerischen, architektonischen und philosophischen Fragen im Rahmen der vorliegenden Schrift er{\"o}rtert werden, obwohl sie dennoch als raumtheoretische Fragestellung von Interesse sind. Hauptgegenstand der vorliegenden Arbeit liegt in der Erforschung, ob richtungsgebundene Stereofonie einen relevanten Beitrag zur menschlichen Navigation, haupts{\"a}chlich zu Fuß, in urbanen Gebieten — vorwiegend im Außenraum — leisten kann. Der erste Teil gliedert sich in »Raum und Klang«, es werden raumtheoretische {\"U}berlegungen zur menschlichen Bewegung im Raum, Raumvorstellungen, r{\"a}umliche Kl{\"a}nge und Klangwahrnehmung sowie die Entwicklung stereofoner Apparaturen und Aspekte der Augmented Audio Reality besprochen. Im zweiten Teil werden drei Demonstratoren als Anwendungsszenarien und drei Evaluierungen im Außenraum vorgestellt. Die Tests untersuchen, ob sich das Verfahren zur Navigation f{\"u}r Fußg{\"a}nger eignet und inwieweit eine Einflussnahme auf das Bewegungsverhalten von Nutzern getroffen werden kann. Die Auswertungen der Tests zeigen, dass sich stereofone Kl{\"a}nge grunds{\"a}tzlich als Navigationssystem eignen, da eine große Mehrzahl der Teilnehmer die akustisch markierten Ziele leicht gefunden hat. Ebenso zeigt sich ein klarer Einfluss auf die Bewegungsmuster, allerdings ist dieser abh{\"a}ngig von individuellen Interessen und Vorlieben. Abschließend werden die Ergebnisse der Untersuchungen im Kontext der vorgestellten Theorien diskutiert und die Potenziale stereofoner Anwendungen in einem Ausblick behandelt. Bei der Gestaltung, Erzeugung und Anwendung mobiler Systeme sind unterschiedliche mentale und r{\"a}umliche Modelle und Vorstellungen der Entwickler und Anwender zu beachten. Da eine umfassende transdisziplin{\"a}re Betrachtung klare Begrifflichkeiten erfordert, werden Argumente f{\"u}r ein raumtheoretisches Vokabular diskutiert. Diese sind f{\"u}r einen gestalterischen Einsatz von richtungsgebundener Stereofonie — besonders im Kontext mobiler Navigation durch akustisch augmentierte R{\"a}ume — {\"a}ußerst relevant.}, subject = {Raum}, language = {de} } @incollection{Manning, author = {Manning, Erin}, title = {10 Propositionen f{\"u}r eine radikale P{\"a}dagogik, oder: Wie den Wert neu denken?}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4266}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42660}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {121 -- 138}, abstract = {Radikale P{\"a}dagogik richtet ihre Aufmerksamkeit sowohl auf die allt{\"a}glichen Techniken p{\"a}dagogischer Praxis - Techniken zur Aktivierung eines Begegnungsraumes, Techniken, sich um die Arbeit und einander zu k{\"u}mmern, Techniken des kultur{\"u}bergreifenden Zuh{\"o}rens, Techniken, sich dem Mehr-als zuzuwenden - als auch auf Techniken zum »{\"U}berschreiten der Schwelle«. Das {\"U}berschreiten der Schwelle h{\"a}ngt mit der Art und Weise der Anpassung (accommodation) zusammen, die es erm{\"o}glicht, das Lernen in all seinen Erscheinungsformen wertzusch{\"a}tzen.}, subject = {P{\"a}dagogik}, language = {de} } @misc{MacielCostadaSilva, type = {Master Thesis}, author = {Maciel Costa da Silva, Luiza}, title = {Smart Cities and Mobility Stations: Lessons learned from the Smarter Together in Vienna and Munich}, doi = {10.25643/bauhaus-universitaet.4270}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201012-42702}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {110}, abstract = {With an increasing urban population and urban problems arising from this unplanned growth, several projects aimed at promoting sustainable urban development have emerged. Smart mobility strategies, such as shared mobility and mobility stations, represent some of the solutions to promote changes in travel behavior. Despite its beneficial impacts, however, the implementation of such infrastructure is criticized for not contributing to current urban issues, as well as often disregarding knowledge about urban space and its functioning. In this context, the Smarter Together, a joint research and innovation project funded through the European Union program H2020, was implemented. The project selected three lighthouse cities to test and upscale innovative solutions: Vienna, Munich, and Lyon. This master thesis presents the main characteristics of the mobility stations systems implemented in Vienna and Munich in the scope of the project Smarter Together. Its main goal is to share what can be learned from their experiences while approaching critically the concept of smart cities. This master thesis identifies important aspects to take into account when planning, implementing, and operating mobility stations, and provides an understanding of smart cities and smart mobility that goes beyond the adoption of technology. Several methods were combined for the development of this master thesis, such as quantitative secondary data, observational studies, application of survey forms, explorative expert interviews, and literature review. This work has demonstrated that the Smarter Together has a cutting-edge scope and contributed greatly to research and innovation, by creating living laboratories to test the application of technology in the urban environment. However, from the perspective of the mobility stations assessment, many caveats were made. In short, many lessons could be learned and are presented throughout this work aiming at contributing to the improvement of the mobility stations implemented in the project areas in Munich and Vienna, as well as for inspiring other cities in Europe and worldwide.}, subject = {Intelligente Stadt}, language = {en} } @incollection{Linseisen, author = {Linseisen, Elisa}, title = {Medien/Denken/Um/Formatieren}, series = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4257}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42574}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {51 -- 69}, abstract = {Die medienwissenschaftliche Praxis des Um / Formatierens wurde im Wintersemester 2017 / 18 mit vierzig Bache- lor-Studierenden der Medien-, Theaterwissenschaft und den Gender Studies entwickelt und erprobt. Inhalt des Seminars waren konkrete mediale Standardformate, wie z. B. die Carte de Visite, die Schallplatte, der 16- oder 35mm Filmstreifen, digitale Dateiformate, wie das JPEG, GIF, MP3, die Videokassette oder auch Papierformate wie DIN A0 oder A8.}, subject = {Format}, language = {de} } @phdthesis{Lee, author = {Lee, Sihyo}, title = {The making of totalitarian city in Pyongyang: The spatial transition from free to ideology, and for marketization}, doi = {10.25643/bauhaus-universitaet.4173}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200526-41731}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {238}, abstract = {Space is a social product and a social producer. The main aim of this thesis is to reveal 'the process of totalitarian city making in Pyongyang', especially in the light of the interaction between the power and urban space. The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot. After the 1945 independence, Kim's regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens. After entry to the market, to keep Kim's controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives' gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang. This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society.}, subject = {Pyongyang}, language = {en} } @article{LandauToland, author = {Landau, Friederike and Toland, Alexandra}, title = {Luft sehen, sprechen, sch{\"u}tzen. Das Anthropoz{\"a}n der (post-)politischen Stadt}, series = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.579}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43305}, pages = {117 -- 136}, abstract = {Der Beitrag verbindet die Diskussion um die postpolitische Stadt mit der zunehmenden wissenschaftlichen und aktivistischen Auseinandersetzung mit dem Anthropoz{\"a}n, ein Konzept, das die {\"o}kologischen und sozialpolitischen Implikationen menschlichen Handelns auf die Erdoberfl{\"a}che beschreibt. Anhand von drei ausgew{\"a}hlten Fallstudien erkunden wir, wie die spezifisch anthropogene, also menschengemachte, Krise urbaner Luftverschmutzung in k{\"u}nstlerischen Positionen problematisiert wird. Im Kontext des potenziellen Vormarschs von Postpolitik besprechen wir, wie der ambivalente Diskurs des Anthropoz{\"a}ns einerseits Depolitisierung beg{\"u}nstigt und andererseits neue M{\"o}glichkeiten f{\"u}r die Repolitisierung globaler Umweltherausforderungen erm{\"o}glicht.}, subject = {Anthropoz{\"a}n}, language = {de} } @incollection{KynastBaute, author = {Kynast, Katja and Baute, Michael}, title = {Lekt{\"u}rem{\"o}glichkeiten schaffen, Autor*innenschaft generieren. Ein Gespr{\"a}ch zwischen Michael Baute und Katja Kynast zum studentischen Videoessay}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4268}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42688}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {313 -- 332}, abstract = {Ein Gespr{\"a}ch zwischen Michael Baute und Katja Kynast zum studentischen Videoessay}, subject = {Film}, language = {de} } @phdthesis{Kunert, author = {Kunert, Andr{\´e}}, title = {3D Interaction Techniques in Multi-User Virtual Reality : towards scalable templates and implementation patterns for cooperative interfaces}, doi = {10.25643/bauhaus-universitaet.4296}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201204-42962}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {147}, abstract = {Multi-user projection systems provide a coherent 3D interaction space for multiple co-located users that facilitates mutual awareness, full-body interaction, and the coordination of activities. The users perceive the shared scene from their respective viewpoints and can directly interact with the 3D content. This thesis reports on novel interaction patterns for collaborative 3D interaction for local and distributed user groups based on such multi-user projection environments. A particular focus of our developments lies in the provision of multiple independent interaction territories in our workspaces and their tight integration into collaborative workflows. The motivation for such multi-focus workspaces is grounded in research on social cooperation patterns, specifically in the requirement for supporting phases of loose and tight collaboration and the emergence of dedicated orking territories for private usage and public exchange. We realized independent interaction territories in the form of handheld virtual viewing windows and multiple co-located hardware displays in a joint workspace. They provide independent views of a shared virtual environment and serve as access points for the exploration and manipulation of the 3D content. Their tight integration into our workspace supports fluent transitions between individual work and joint user engagement. The different affordances of various displays in an exemplary workspace consisting of a large 3D wall, a 3D tabletop, and handheld virtual viewing windows, promote different usage scenarios, for instance for views from an egocentric perspective, miniature scene representations, close-up views, or storage and transfer areas. This work shows that this versatile workspace can make the cooperation of multiple people in joint tasks more effective, e.g. by parallelizing activities, distributing subtasks, and providing mutual support. In order to create, manage, and share virtual viewing windows, this thesis presents the interaction technique of Photoportals, a tangible interface based on the metaphor of digital photography. They serve as configurable viewing territories and enable the individual examination of scene details as well as the immediate sharing of the prepared views. Photoportals are specifically designed to complement other interface facets and provide extended functionality for scene navigation, object manipulation, and for the creation of temporal recordings of activities in the virtual scene. A further objective of this work is the realization of a coherent interaction space for direct 3D input across the independent interaction territories in multi-display setups. This requires the simultaneous consideration of user input in several potential interaction windows as well as configurable disambiguation schemes for the implicit selection of distinct interaction contexts. We generalized the required implementation structures into a high-level software pattern and demonstrated its versatility by means of various multi-context 3D interaction tools. Additionally, this work tackles specific problems related to group navigation in multiuser projection systems. Joint navigation of a collocated group of users can lead to unintentional collisions when passing narrow scene sections. In this context, we suggest various solutions that prevent individual collisions during group navigation and discuss their effect on the perceived integrity of the travel group and the 3D scene. For collaboration scenarios involving distributed user groups, we furthermore explored different configurations for joint and individual travel. Last but not least, this thesis provides detailed information and implementation templates for the realization of the proposed interaction techniques and collaborative workspaces in scenegraph-based VR systems. These contributions to the abstraction of specific interaction patterns, such as group navigation and multi-window interaction, facilitate their reuse in other virtual reality systems and their adaptation to further collaborative scenarios.}, subject = {Virtuelle Realit{\"a}t}, language = {en} } @phdthesis{Krtilova, author = {Krtilova, Katerina}, title = {Gesten des Denkens. Vil{\´e}m Flussers Medienphilosophie}, doi = {10.25643/bauhaus-universitaet.4067}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200123-40679}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {202}, abstract = {In einer systematischen Interpretation von Vil{\´e}m Flussers Werk schl{\"a}gt die Arbeit vor, Flussers Ansatz als einen medienphilosophischen zu verstehen, insofern er das „wie" der medienphilosophischen Fragestellung in den Mittelpunkt r{\"u}ckt. Medien werden nicht erst dann zu einem wesentlichen Bestandteil von Flussers Philosophie, wenn er sie explizit zum Gegenstand seiner Untersuchungen der gegenw{\"a}rtigen Kultur und Gesellschaft oder historischer R{\"u}ckblicke macht; Denken vollzieht sich immer in Medien oder medialen Praktiken, es wird nicht nur von ihnen (mit) gepr{\"a}gt - ohne Medien g{\"a}be es kein Denken und umgekehrt ver{\"a}ndert sich Philosophie mit den (jeweils) neuen Medien. Ausgehend von Begriffen oder eher Denkfiguren, die neben dem „was" des jeweils verhandelten Themas auch das „wie" der Reflexion selbst adressieren, wird der „Umbruch in der Struktur des Denkens" zugleich als Beschreibung von Medienumbr{\"u}chen verstanden - mit dem Fluchtpunkt des Sprungs in das Universum der Komputation - und als Vollzug der gegenw{\"a}rtigen Ver{\"a}nderung der „Methode des Denkens". Flussers (Ver)Suche einer Reflexion, die nicht mehr durch das Medium Schrift strukturiert ist, sondern sowohl alten Medien wie dem Bild - bzw. Praktiken des Abbildens, Darstellens, Einbildens usw. - als auch neuen Medien - dem Komputieren - Geltung verschafft, laufen auf eine widerspr{\"u}chliche Diagnose des neuen Universums der Komputation (anders: der technischen Bilder) hinaus : eine kybermetisch inspirierte Vision der frei modellierbaren Wirklichkeit(en) einerseits und die Dystopie einer Welt, in der Apparaten Denken, Wahrnehmen und Handeln beherrschen andererseits. Die Arbeit zeigt auf, wie Flusser zu dieser Aporie der Medienreflexion - die weit {\"u}ber Flussers Werk hinaus virulent bleibt - gelangt und wie sie, ausgehend von seiner Figur der Geste, im Sinne einer performativen Medienreflexion gel{\"o}st werden k{\"o}nnte.}, subject = {Medientheorie}, language = {de} } @article{KavrakovKareemMorgenthal, author = {Kavrakov, Igor and Kareem, Ahsan and Morgenthal, Guido}, title = {Comparison Metrics for Time-histories: Application to Bridge Aerodynamics}, doi = {10.25643/bauhaus-universitaet.4186}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200625-41863}, pages = {28}, abstract = {Wind effects can be critical for the design of lifelines such as long-span bridges. The existence of a significant number of aerodynamic force models, used to assess the performance of bridges, poses an important question regarding their comparison and validation. This study utilizes a unified set of metrics for a quantitative comparison of time-histories in bridge aerodynamics with a host of characteristics. Accordingly, nine comparison metrics are included to quantify the discrepancies in local and global signal features such as phase, time-varying frequency and magnitude content, probability density, nonstationarity and nonlinearity. Among these, seven metrics available in the literature are introduced after recasting them for time-histories associated with bridge aerodynamics. Two additional metrics are established to overcome the shortcomings of the existing metrics. The performance of the comparison metrics is first assessed using generic signals with prescribed signal features. Subsequently, the metrics are applied to a practical example from bridge aerodynamics to quantify the discrepancies in the aerodynamic forces and response based on numerical and semi-analytical aerodynamic models. In this context, it is demonstrated how a discussion based on the set of comparison metrics presented here can aid a model evaluation by offering deeper insight. The outcome of the study is intended to provide a framework for quantitative comparison and validation of aerodynamic models based on the underlying physics of fluid-structure interaction. Immediate further applications are expected for the comparison of time-histories that are simulated by data-driven approaches.}, subject = {Ingenieurwissenschaften}, language = {en} } @phdthesis{Kavrakov, author = {Kavrakov, Igor}, title = {Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-284-2}, doi = {10.25643/bauhaus-universitaet.4109}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200316-41099}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {314}, abstract = {Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles' strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind-bridge interaction and suggest appropriate modeling strategies for an enhanced design.}, subject = {Br{\"u}cke}, language = {en} } @article{KarimimoshaverHajivalieiShokrietal., author = {Karimimoshaver, Mehrdad and Hajivaliei, Hatameh and Shokri, Manouchehr and Khalesro, Shakila and Aram, Farshid and Shamshirband, Shahaboddin}, title = {A Model for Locating Tall Buildings through a Visual Analysis Approach}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 17, article 6072}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10176072}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43350}, pages = {1 -- 25}, abstract = {Tall buildings have become an integral part of cities despite all their pros and cons. Some current tall buildings have several problems because of their unsuitable location; the problems include increasing density, imposing traffic on urban thoroughfares, blocking view corridors, etc. Some of these buildings have destroyed desirable views of the city. In this research, different criteria have been chosen, such as environment, access, social-economic, land-use, and physical context. These criteria and sub-criteria are prioritized and weighted by the analytic network process (ANP) based on experts' opinions, using Super Decisions V2.8 software. On the other hand, layers corresponding to sub-criteria were made in ArcGIS 10.3 simultaneously, then via a weighted overlay (map algebra), a locating plan was created. In the next step seven hypothetical tall buildings (20 stories), in the best part of the locating plan, were considered to evaluate how much of theses hypothetical buildings would be visible (fuzzy visibility) from the street and open spaces throughout the city. These processes have been modeled by MATLAB software, and the final fuzzy visibility plan was created by ArcGIS. Fuzzy visibility results can help city managers and planners to choose which location is suitable for a tall building and how much visibility may be appropriate. The proposed model can locate tall buildings based on technical and visual criteria in the future development of the city and it can be widely used in any city as long as the criteria and weights are localized.}, subject = {Geb{\"a}ude}, language = {en} } @article{KargarSamadianfardParsaetal., author = {Kargar, Katayoun and Samadianfard, Saeed and Parsa, Javad and Nabipour, Narjes and Shamshirband, Shahaboddin and Mosavi, Amir and Chau, Kwok-Wing}, title = {Estimating longitudinal dispersion coefficient in natural streams using empirical models and machine learning algorithms}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {Volume 14, No. 1}, publisher = {Taylor \& Francis}, doi = {10.1080/19942060.2020.1712260}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200128-40775}, pages = {311 -- 322}, abstract = {The longitudinal dispersion coefficient (LDC) plays an important role in modeling the transport of pollutants and sediment in natural rivers. As a result of transportation processes, the concentration of pollutants changes along the river. Various studies have been conducted to provide simple equations for estimating LDC. In this study, machine learning methods, namely support vector regression, Gaussian process regression, M5 model tree (M5P) and random forest, and multiple linear regression were examined in predicting the LDC in natural streams. Data sets from 60 rivers around the world with different hydraulic and geometric features were gathered to develop models for LDC estimation. Statistical criteria, including correlation coefficient (CC), root mean squared error (RMSE) and mean absolute error (MAE), were used to scrutinize the models. The LDC values estimated by these models were compared with the corresponding results of common empirical models. The Taylor chart was used to evaluate the models and the results showed that among the machine learning models, M5P had superior performance, with CC of 0.823, RMSE of 454.9 and MAE of 380.9. The model of Sahay and Dutta, with CC of 0.795, RMSE of 460.7 and MAE of 306.1, gave more precise results than the other empirical models. The main advantage of M5P models is their ability to provide practical formulae. In conclusion, the results proved that the developed M5P model with simple formulations was superior to other machine learning models and empirical models; therefore, it can be used as a proper tool for estimating the LDC in rivers.}, subject = {Maschinelles Lernen}, language = {en} } @article{JilteAhmadiKumaretal., author = {Jilte, Ravindra and Ahmadi, Mohammad Hossein and Kumar, Ravinder and Kalamkar, Vilas and Mosavi, Amir}, title = {Cooling Performance of a Novel Circulatory Flow Concentric Multi-Channel Heat Sink with Nanofluids}, series = {Nanomaterials}, volume = {2020}, journal = {Nanomaterials}, number = {Volume 10, Issue 4, 647}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/nano10040647}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200401-41241}, pages = {12}, abstract = {Heat rejection from electronic devices such as processors necessitates a high heat removal rate. The present study focuses on liquid-cooled novel heat sink geometry made from four channels (width 4 mm and depth 3.5 mm) configured in a concentric shape with alternate flow passages (slot of 3 mm gap). In this study, the cooling performance of the heat sink was tested under simulated controlled conditions.The lower bottom surface of the heat sink was heated at a constant heat flux condition based on dissipated power of 50 W and 70 W. The computations were carried out for different volume fractions of nanoparticles, namely 0.5\% to 5\%, and water as base fluid at a flow rate of 30 to 180 mL/min. The results showed a higher rate of heat rejection from the nanofluid cooled heat sink compared with water. The enhancement in performance was analyzed with the help of a temperature difference of nanofluid outlet temperature and water outlet temperature under similar operating conditions. The enhancement was ~2\% for 0.5\% volume fraction nanofluids and ~17\% for a 5\% volume fraction.}, subject = {Nanostrukturiertes Material}, language = {en} } @phdthesis{Jentzsch, author = {Jentzsch, Sina}, title = {Appell der Dinge. K{\"u}nstlerische Zuwendung zu den Dingen in den 1960er-Jahren}, doi = {10.25643/bauhaus-universitaet.4112}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200323-41129}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {261}, abstract = {Diese Dissertation besch{\"a}ftigt sich mit Kunstwerken, die das allt{\"a}gliche Ding in den Blick nehmen. N{\"a}hrboden dieser Kunstform sind die soziokulturellen Entwicklungen des 20. Jahrhunderts, mit denen wesentliche Ver{\"a}nderungen hinsichtlich des Verh{\"a}ltnisses von Mensch und Ding einhergingen. Daraus resultierte eine allgemeine k{\"u}nstlerische Zuwendung zu den Dingen und eine einzigartige Kulmination aus verschiedenartigen Auseinandersetzungen mit ihnen als kunstf{\"a}hige Gegenst{\"a}nde, {\"u}ber die sich die neue Dingwelt erschlossen wurde und deren Kunstwerke einen Spiegel dieser Entwicklungen darstellen. Die Dissertation stellt ebenfalls die Dinge selbst in den Fokus. Vier Aspekte von Dingen (Materialit{\"a}t, Funktionalit{\"a}t, Repr{\"a}sentationalit{\"a}t und Relationalit{\"a}t) werden gesondert ins Auge gefasst und in den theoretischen Diskurs des 20. Jahrhunderts eingeordnet, um sie als Teil der gelebten Realit{\"a}t besser zu verstehen, von der sich der {\"a}sthetische Blick nicht trennen l{\"a}sst. Anhand der k{\"u}nstlerischen Positionen von Robert Rauschenberg, Christo und Jeanne-Claude, Daniel Spoerri und Arman sowie Claes Oldenburg werden die verschiedenen Aspekte der Dinge n{\"a}her betrachtet und analysiert, wie diese speziell in den Kunstwerken thematisiert werden und welche Relevanz sie f{\"u}r deren Rezeptionserfahrung haben. Die Korrelation dieser beiden Ebenen - die Dinge als konstitutiver Bestandteil im sozialen Raum und die Dinge als Elemente in Kunstwerken -, die im Fokus der vorliegenden Untersuchung steht, erm{\"o}glicht es, die k{\"u}nstlerische Zuwendung zu den Dingen in den 1960er-Jahren neu einzuordnen. Dar{\"u}ber hinaus wird dadurch ein differenziertes Bild von der Kunst dieser Zeit sowie den Dingen in der Kunst im Allgemeinen gezeichnet.}, subject = {Ding}, language = {de} } @phdthesis{Javanmardi, author = {Javanmardi, Leila}, title = {URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979}, doi = {10.25643/bauhaus-universitaet.4597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220224-45971}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universit{\"a}t Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio-political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.}, subject = {Stadtplanung}, language = {en} } @article{IşıkBueyueksaracLeventEkincietal., author = {I{\c{s}}{\i}k, Ercan and B{\"u}y{\"u}ksara{\c{c}}, Ayd{\i}n and Levent Ekinci, Yunus and Ayd{\i}n, Mehmet Cihan and Harirchian, Ehsan}, title = {The Effect of Site-Specific Design Spectrum on Earthquake-Building Parameters: A Case Study from the Marmara Region (NW Turkey)}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7247}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207247}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42758}, pages = {23}, abstract = {The Marmara Region (NW Turkey) has experienced significant earthquakes (M > 7.0) to date. A destructive earthquake is also expected in the region. To determine the effect of the specific design spectrum, eleven provinces located in the region were chosen according to the Turkey Earthquake Building Code updated in 2019. Additionally, the differences between the previous and updated regulations of the country were investigated. Peak Ground Acceleration (PGA) and Peak Ground Velocity (PGV) were obtained for each province by using earthquake ground motion levels with 2\%, 10\%, 50\%, and 68\% probability of exceedance in 50-year periods. The PGA values in the region range from 0.16 to 0.7 g for earthquakes with a return period of 475 years. For each province, a sample of a reinforced-concrete building having two different numbers of stories with the same ground and structural characteristics was chosen. Static adaptive pushover analyses were performed for the sample reinforced-concrete building using each province's design spectrum. The variations in the earthquake and structural parameters were investigated according to different geographical locations. It was determined that the site-specific design spectrum significantly influences target displacements for performance-based assessments of buildings due to seismicity characteristics of the studied geographic location.}, subject = {Erdbeben}, language = {en} } @incollection{Hoelscher, author = {H{\"o}lscher, Stefan}, title = {Im Workshop des Sinnlichen}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4252}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42523}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {167 -- 185}, abstract = {Folgende fiktive Situation soll ein Problem markieren, das in diesem Beitrag diskutiert wird und nach Ansicht seines Autors ein an Kunsthochschulen weit verbreitetes Ph{\"a}nomen darstellt. Im Rahmen eines Mentoring-Workshops stellt eine Gruppe Studierender Arbeitsmaterial ihres aktuellen Projekts vor, um es anschließend in der Gruppe zu besprechen. Ziel des Veranstaltungsformats ist es, die Studierenden w{\"a}hrend der Entwicklung ihrer k{\"u}nstlerischen Praktiken zu begleiten und diese nicht anhand handwerklicher Kriterien {\"u}berzudeterminieren, sondern ihrer Eigenlogik zu folgen, den ihnen inh{\"a}renten {\"a}sthetischen Potentialen nachzugehen und ein Bewusstsein f{\"u}r die Kontexte und Diskurse zu schaffen, in denen sie verortet sind. Die Studierenden, die heute ihr Projekt vorstellen, haben ein Photoalbum mitgebracht, in das sie, der Anordnungslogik von Urlaubsaufnahmen folgend, eine Reihe analoger Photographien geklebt haben, die Dutzende Schnappsch{\"u}sse einer entfernten Insel zeigen, die sich hinter der den Vordergrund des Bildes einnehmenden Meeresoberfl{\"a}che abzeichnet.}, subject = {Workshop}, language = {de} } @article{Haefner, author = {H{\"a}fner, Lukas}, title = {Common Ground. Kommentar zu Lisa Vollmer und Boris Michel „Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage"}, series = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {sub\urban. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.565}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200507-41655}, pages = {177 -- 182}, abstract = {Die im Jahr 2020 in Deutschland praktizierte Siedlungs- und Wohnungspolitik erh{\"a}lt in Anbetracht ihrer Auswirkungen auf die soziale und {\"o}kologische Lage einen bitteren Beigeschmack. Arm und Reich triften weiter auseinander und einer zielgerichteten {\"o}kologischen Transformation der Art und Weise, wie Stadtentwicklung und Wohnungspolitik gestaltet werden,stehen noch immer historisch und systemisch bedingte Pfadabh{\"a}ngigkeiten im Weg. Diese werden nur durch eine integrierte Betrachtung sozialer und {\"o}konomischer Aspekte sichtbar und deuten auf eine der urspr{\"u}nglichen Fragen linker Gesellschaftsforschung hin: Die Auseinandersetzung mit dem Verh{\"a}ltnis von Eigentum und Gerechtigkeit. Im Ergebnis stehen drei wesentliche Befunde: Der Diskurs zum Schutz des Klimas und der Biodiversit{\"a}t ber{\"u}hrt direkt die Parameter Dichte, Nutzungsmischung und Fl{\"a}cheninanspruchnahme; zweitens steigt letztere relativ mit erh{\"o}htem, individuell verf{\"u}gbaren Kapital und insbesondere im selbstgenutztem Eigentum gegen{\"u}ber Mietwohnungen; und drittens w{\"a}chst der Eigentumsanteil mit fortschreitender Finanzialisierung des Wohnungsmarktes, sodass das Risiko sozialer und {\"o}kologischer Krisen sich versch{\"a}rft.}, subject = {Umweltgerechtigkeit}, language = {de} } @phdthesis{HosseinNezhadShirazi, author = {Hossein Nezhad Shirazi, Ali}, title = {Multi-Scale Modeling of Lithium ion Batteries: a thermal management approach and molecular dynamic studies}, doi = {10.25643/bauhaus-universitaet.4098}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200214-40986}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low. Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs. Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite. It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.}, subject = {Akkumulator}, language = {en} } @article{HomaeiSoleimaniShamshirbandetal., author = {Homaei, Mohammad Hossein and Soleimani, Faezeh and Shamshirband, Shahaboddin and Mosavi, Amir and Nabipour, Narjes and Varkonyi-Koczy, Annamaria R.}, title = {An Enhanced Distributed Congestion Control Method for Classical 6LowPAN Protocols Using Fuzzy Decision System}, series = {IEEE Access}, journal = {IEEE Access}, number = {volume 8}, publisher = {IEEE}, doi = {10.1109/ACCESS.2020.2968524}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40805}, pages = {20628 -- 20645}, abstract = {The classical Internet of things routing and wireless sensor networks can provide more precise monitoring of the covered area due to the higher number of utilized nodes. Because of the limitations in shared transfer media, many nodes in the network are prone to the collision in simultaneous transmissions. Medium access control protocols are usually more practical in networks with low traffic, which are not subjected to external noise from adjacent frequencies. There are preventive, detection and control solutions to congestion management in the network which are all the focus of this study. In the congestion prevention phase, the proposed method chooses the next step of the path using the Fuzzy decision-making system to distribute network traffic via optimal paths. In the congestion detection phase, a dynamic approach to queue management was designed to detect congestion in the least amount of time and prevent the collision. In the congestion control phase, the back-pressure method was used based on the quality of the queue to decrease the probability of linking in the pathway from the pre-congested node. The main goals of this study are to balance energy consumption in network nodes, reducing the rate of lost packets and increasing quality of service in routing. Simulation results proved the proposed Congestion Control Fuzzy Decision Making (CCFDM) method was more capable in improving routing parameters as compared to recent algorithms.}, subject = {Internet der dinge}, language = {en} } @article{HassannatajJoloudariHassannatajJoloudariSaadatfaretal., author = {Hassannataj Joloudari, Javad and Hassannataj Joloudari, Edris and Saadatfar, Hamid and GhasemiGol, Mohammad and Razavi, Seyyed Mohammad and Mosavi, Amir and Nabipour, Narjes and Shamshirband, Shahaboddin and Nadai, Laszlo}, title = {Coronary Artery Disease Diagnosis: Ranking the Significant Features Using a Random Trees Model}, series = {International Journal of Environmental Research and Public Health, IJERPH}, volume = {2020}, journal = {International Journal of Environmental Research and Public Health, IJERPH}, number = {Volume 17, Issue 3, 731}, publisher = {MDPI}, doi = {10.3390/ijerph17030731}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40819}, pages = {24}, abstract = {Heart disease is one of the most common diseases in middle-aged citizens. Among the vast number of heart diseases, coronary artery disease (CAD) is considered as a common cardiovascular disease with a high death rate. The most popular tool for diagnosing CAD is the use of medical imaging, e.g., angiography. However, angiography is known for being costly and also associated with a number of side effects. Hence, the purpose of this study is to increase the accuracy of coronary heart disease diagnosis through selecting significant predictive features in order of their ranking. In this study, we propose an integrated method using machine learning. The machine learning methods of random trees (RTs), decision tree of C5.0, support vector machine (SVM), and decision tree of Chi-squared automatic interaction detection (CHAID) are used in this study. The proposed method shows promising results and the study confirms that the RTs model outperforms other models.}, subject = {Maschinelles Lernen}, language = {en} } @article{HarirchianLahmerRasulzade, author = {Harirchian, Ehsan and Lahmer, Tom and Rasulzade, Shahla}, title = {Earthquake Hazard Safety Assessment of Existing Buildings Using Optimized Multi-Layer Perceptron Neural Network}, series = {Energies}, volume = {2020}, journal = {Energies}, number = {Volume 13, Issue 8, 2060}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en13082060}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200504-41575}, pages = {16}, abstract = {The latest earthquakes have proven that several existing buildings, particularly in developing countries, are not secured from damages of earthquake. A variety of statistical and machine-learning approaches have been proposed to identify vulnerable buildings for the prioritization of retrofitting. The present work aims to investigate earthquake susceptibility through the combination of six building performance variables that can be used to obtain an optimal prediction of the damage state of reinforced concrete buildings using artificial neural network (ANN). In this regard, a multi-layer perceptron network is trained and optimized using a database of 484 damaged buildings from the D{\"u}zce earthquake in Turkey. The results demonstrate the feasibility and effectiveness of the selected ANN approach to classify concrete structural damage that can be used as a preliminary assessment technique to identify vulnerable buildings in disaster risk-management programs.}, subject = {Erdbeben}, language = {en} } @article{HarirchianLahmerKumarietal., author = {Harirchian, Ehsan and Lahmer, Tom and Kumari, Vandana and Jadhav, Kirti}, title = {Application of Support Vector Machine Modeling for the Rapid Seismic Hazard Safety Evaluation of Existing Buildings}, series = {Energies}, volume = {2020}, journal = {Energies}, number = {volume 13, issue 13, 3340}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en13133340}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200707-41915}, pages = {15}, abstract = {The economic losses from earthquakes tend to hit the national economy considerably; therefore, models that are capable of estimating the vulnerability and losses of future earthquakes are highly consequential for emergency planners with the purpose of risk mitigation. This demands a mass prioritization filtering of structures to identify vulnerable buildings for retrofitting purposes. The application of advanced structural analysis on each building to study the earthquake response is impractical due to complex calculations, long computational time, and exorbitant cost. This exhibits the need for a fast, reliable, and rapid method, commonly known as Rapid Visual Screening (RVS). The method serves as a preliminary screening platform, using an optimum number of seismic parameters of the structure and predefined output damage states. In this study, the efficacy of the Machine Learning (ML) application in damage prediction through a Support Vector Machine (SVM) model as the damage classification technique has been investigated. The developed model was trained and examined based on damage data from the 1999 D{\"u}zce Earthquake in Turkey, where the building's data consists of 22 performance modifiers that have been implemented with supervised machine learning.}, subject = {Erdbeben}, language = {en} } @article{HarirchianLahmerBuddhirajuetal., author = {Harirchian, Ehsan and Lahmer, Tom and Buddhiraju, Sreekanth and Mohammad, Kifaytullah and Mosavi, Amir}, title = {Earthquake Safety Assessment of Buildings through Rapid Visual Screening}, series = {Buildings}, volume = {2020}, journal = {Buildings}, number = {Volume 10, Issue 3}, publisher = {MDPI}, doi = {10.3390/buildings10030051}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200331-41153}, pages = {15}, abstract = {Earthquake is among the most devastating natural disasters causing severe economical, environmental, and social destruction. Earthquake safety assessment and building hazard monitoring can highly contribute to urban sustainability through identification and insight into optimum materials and structures. While the vulnerability of structures mainly depends on the structural resistance, the safety assessment of buildings can be highly challenging. In this paper, we consider the Rapid Visual Screening (RVS) method, which is a qualitative procedure for estimating structural scores for buildings suitable for medium- to high-seismic cases. This paper presents an overview of the common RVS methods, i.e., FEMA P-154, IITK-GGSDMA, and EMPI. To examine the accuracy and validation, a practical comparison is performed between their assessment and observed damage of reinforced concrete buildings from a street survey in the Bing{\"o}l region, Turkey, after the 1 May 2003 earthquake. The results demonstrate that the application of RVS methods for preliminary damage estimation is a vital tool. Furthermore, the comparative analysis showed that FEMA P-154 creates an assessment that overestimates damage states and is not economically viable, while EMPI and IITK-GGSDMA provide more accurate and practical estimation, respectively.}, subject = {Maschinelles Lernen}, language = {en} } @article{HarirchianLahmer, author = {Harirchian, Ehsan and Lahmer, Tom}, title = {Improved Rapid Visual Earthquake Hazard Safety Evaluation of Existing Buildings Using a Type-2 Fuzzy Logic Model}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, Issue 3, 2375}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10072375}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200331-41161}, pages = {14}, abstract = {Rapid Visual Screening (RVS) is a procedure that estimates structural scores for buildings and prioritizes their retrofit and upgrade requirements. Despite the speed and simplicity of RVS, many of the collected parameters are non-commensurable and include subjectivity due to visual observations. This might cause uncertainties in the evaluation, which emphasizes the use of a fuzzy-based method. This study aims to propose a novel RVS methodology based on the interval type-2 fuzzy logic system (IT2FLS) to set the priority of vulnerable building to undergo detailed assessment while covering uncertainties and minimizing their effects during evaluation. The proposed method estimates the vulnerability of a building, in terms of Damage Index, considering the number of stories, age of building, plan irregularity, vertical irregularity, building quality, and peak ground velocity, as inputs with a single output variable. Applicability of the proposed method has been investigated using a post-earthquake damage database of reinforced concrete buildings from the Bing{\"o}l and D{\"u}zce earthquakes in Turkey.}, subject = {Fuzzy-Logik}, language = {en} } @article{HarirchianKumariJadhavetal., author = {Harirchian, Ehsan and Kumari, Vandana and Jadhav, Kirti and Raj Das, Rohan and Rasulzade, Shahla and Lahmer, Tom}, title = {A Machine Learning Framework for Assessing Seismic Hazard Safety of Reinforced Concrete Buildings}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7153}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207153}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42744}, pages = {18}, abstract = {Although averting a seismic disturbance and its physical, social, and economic disruption is practically impossible, using the advancements in computational science and numerical modeling shall equip humanity to predict its severity, understand the outcomes, and equip for post-disaster management. Many buildings exist amidst the developed metropolitan areas, which are senile and still in service. These buildings were also designed before establishing national seismic codes or without the introduction of construction regulations. In that case, risk reduction is significant for developing alternatives and designing suitable models to enhance the existing structure's performance. Such models will be able to classify risks and casualties related to possible earthquakes through emergency preparation. Thus, it is crucial to recognize structures that are susceptible to earthquake vibrations and need to be prioritized for retrofitting. However, each building's behavior under seismic actions cannot be studied through performing structural analysis, as it might be unrealistic because of the rigorous computations, long period, and substantial expenditure. Therefore, it calls for a simple, reliable, and accurate process known as Rapid Visual Screening (RVS), which serves as a primary screening platform, including an optimum number of seismic parameters and predetermined performance damage conditions for structures. In this study, the damage classification technique was studied, and the efficacy of the Machine Learning (ML) method in damage prediction via a Support Vector Machine (SVM) model was explored. The ML model is trained and tested separately on damage data from four different earthquakes, namely Ecuador, Haiti, Nepal, and South Korea. Each dataset consists of varying numbers of input data and eight performance modifiers. Based on the study and the results, the ML model using SVM classifies the given input data into the belonging classes and accomplishes the performance on hazard safety evaluation of buildings.}, subject = {Erdbeben}, language = {en} } @article{HarirchianJadhavMohammadetal., author = {Harirchian, Ehsan and Jadhav, Kirti and Mohammad, Kifaytullah and Aghakouchaki Hosseini, Seyed Ehsan and Lahmer, Tom}, title = {A Comparative Study of MCDM Methods Integrated with Rapid Visual Seismic Vulnerability Assessment of Existing RC Structures}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 18, article 6411}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10186411}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200918-42360}, pages = {24}, abstract = {Recently, the demand for residence and usage of urban infrastructure has been increased, thereby resulting in the elevation of risk levels of human lives over natural calamities. The occupancy demand has rapidly increased the construction rate, whereas the inadequate design of structures prone to more vulnerability. Buildings constructed before the development of seismic codes have an additional susceptibility to earthquake vibrations. The structural collapse causes an economic loss as well as setbacks for human lives. An application of different theoretical methods to analyze the structural behavior is expensive and time-consuming. Therefore, introducing a rapid vulnerability assessment method to check structural performances is necessary for future developments. The process, as mentioned earlier, is known as Rapid Visual Screening (RVS). This technique has been generated to identify, inventory, and screen structures that are potentially hazardous. Sometimes, poor construction quality does not provide some of the required parameters; in this case, the RVS process turns into a tedious scenario. Hence, to tackle such a situation, multiple-criteria decision-making (MCDM) methods for the seismic vulnerability assessment opens a new gateway. The different parameters required by RVS can be taken in MCDM. MCDM evaluates multiple conflicting criteria in decision making in several fields. This paper has aimed to bridge the gap between RVS and MCDM. Furthermore, to define the correlation between these techniques, implementation of the methodologies from Indian, Turkish, and Federal Emergency Management Agency (FEMA) codes has been done. The effects of seismic vulnerability of structures have been observed and compared.}, subject = {Erdbebensicherheit}, language = {en} } @misc{Hamzah, type = {Master Thesis}, author = {Hamzah, Abdulrazzak}, title = {L{\"o}sung von Randwertaufgaben der Bruchmechanik mit Hilfe einer approximationsbasierten Kopplung zwischen der Finite-Elemente-Methode und Methoden der komplexen Analysis}, doi = {10.25643/bauhaus-universitaet.4093}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200211-40936}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Das Hauptziel der vorliegenden Arbeit war es, eine stetige Kopplung zwischen der ananlytischen und numerischen L{\"o}sung von Randwertaufgaben mit Singularit{\"a}ten zu realisieren. Durch die inter-polationsbasierte gekoppelte Methode kann eine globale C0 Stetigkeit erzielt werden. F{\"u}r diesen Zweck wird ein spezielle finite Element (Kopplungselement) verwendet, das die Stetigkeit der L{\"o}sung sowohl mit dem analytischen Element als auch mit den normalen CST Elementen gew{\"a}hrleistet. Die interpolationsbasierte gekoppelte Methode ist zwar f{\"u}r beliebige Knotenanzahl auf dem Interface ΓAD anwendbar, aber es konnte durch die Untersuchung von der Interpolationsmatrix und numerische Simulationen festgestellt werden, dass sie schlecht konditioniert ist. Um das Problem mit den numerischen Instabilit{\"a}ten zu bew{\"a}ltigen, wurde eine approximationsbasierte Kopplungsmethode entwickelt und untersucht. Die Stabilit{\"a}t dieser Methode wurde anschließend anhand der Untersuchung von der Gramschen Matrix des verwendeten Basissystems auf zwei Intervallen [-π,π] und [-2π,2π] beurteilt. Die Gramsche Matrix auf dem Intervall [-2π,2π] hat einen g{\"u}nstigeren Konditionszahl in der Abh{\"a}ngigkeit von der Anzahl der Kopplungsknoten auf dem Interface aufgewiesen. Um die dazu geh{\"o}rigen numerischen Instabilit{\"a}ten ausschließen zu k{\"o}nnen wird das Basissystem mit Hilfe vom Gram-Schmidtschen Orthogonalisierungsverfahren auf beiden Intervallen orthogonalisiert. Das orthogonale Basissystem l{\"a}sst sich auf dem Intervall [-2π,2π] mit expliziten Formeln schreiben. Die Methode des konsistentes Sampling, die h{\"a}ufig in der Nachrichtentechnik verwendet wird, wurde zur Realisierung von der approximationsbasierten Kopplung herangezogen. Eine Beschr{\"a}nkung dieser Methode ist es, dass die Anzahl der Sampling-Basisfunktionen muss gleich der Anzahl der Wiederherstellungsbasisfunktionen sein. Das hat dazu gef{\"u}hrt, dass das eingef{\"u}hrt Basissys-tem (mit 2 n Basisfunktionen) nur mit n Basisfunktion verwendet werden kann. Zur L{\"o}sung diese Problems wurde ein alternatives Basissystems (Variante 2) vorgestellt. F{\"u}r die Verwendung dieses Basissystems ist aber eine Transformationsmatrix M n{\"o}tig und bei der Orthogonalisierung des Basissystems auf dem Intervall [-π,π] kann die Herleitung von dieser Matrix kompliziert und aufwendig sein. Die Formfunktionen wurden anschließend f{\"u}r die beiden Varianten hergeleitet und grafisch (f{\"u}r n = 5) dargestellt und wurde gezeigt, dass diese Funktionen die Anforderungen an den Formfunktionen erf{\"u}llen und k{\"o}nnen somit f{\"u}r die FE- Approximation verwendet werden. Anhand numerischer Simulationen, die mit der Variante 1 (mit Orthogonalisierung auf dem Intervall [-2π,2π]) durchgef{\"u}hrt wurden, wurden die grundlegenden Fragen (Beispielsweise: Stetigkeit der Verformungen auf dem Interface ΓAD, Spannungen auf dem analytischen Gebiet) {\"u}ber- pr{\"u}ft.}, subject = {Mathematik}, language = {de} } @incollection{HaivenThornton, author = {Haiven, Max and Thornton, Cassie}, title = {{\"U}ber die University of the Phoenix}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4264}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42640}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {271 -- 288}, abstract = {Wir haben die folgenden 13 Protokolle als Methodik entwickelt, die als Orientierungshilfe bei der Entstehung unserer Workshops und Interventionen dient.}, subject = {Kunst}, language = {de} } @phdthesis{Gretzki, author = {Gretzki, Allan}, title = {BundeskunstHall of Fame - Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext}, doi = {10.25643/bauhaus-universitaet.4215}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200818-42158}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {228}, abstract = {Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext}, subject = {Graffito}, language = {de} } @article{GenaVoelkerSettles, author = {Gena, Amayu Wakoya and V{\"o}lker, Conrad and Settles, Gary}, title = {Qualitative and quantitative schlieren optical measurement of the human thermal plume}, series = {Indoor Air}, volume = {2020}, journal = {Indoor Air}, number = {volume 30, issue 4}, publisher = {John Wiley \& Sons}, doi = {10.1111/ina.12674}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200709-41936}, pages = {757 -- 766}, abstract = {A new large-field, high-sensitivity, single-mirror coincident schlieren optical instrument has been installed at the Bauhaus-Universit{\"a}t Weimar for the purpose of indoor air research. Its performance is assessed by the non-intrusive measurement of the thermal plume of a heated manikin. The schlieren system produces excellent qualitative images of the manikin's thermal plume and also quantitative data, especially schlieren velocimetry of the plume's velocity field that is derived from the digital cross-correlation analysis of a large time sequence of schlieren images. The quantitative results are compared with thermistor and hot-wire anemometer data obtained at discrete points in the plume. Good agreement is obtained, once the differences between path-averaged schlieren data and planar anemometry data are reconciled.}, subject = {Raumklima}, language = {en} } @misc{Froehlich, type = {Master Thesis}, author = {Fr{\"o}hlich, Jan}, title = {On systematic approaches for interpreted information transfer of inspection data from bridge models to structural analysis}, doi = {10.25643/bauhaus-universitaet.4131}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200416-41310}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {82}, abstract = {In conjunction with the improved methods of monitoring damage and degradation processes, the interest in reliability assessment of reinforced concrete bridges is increasing in recent years. Automated imagebased inspections of the structural surface provide valuable data to extract quantitative information about deteriorations, such as crack patterns. However, the knowledge gain results from processing this information in a structural context, i.e. relating the damage artifacts to building components. This way, transformation to structural analysis is enabled. This approach sets two further requirements: availability of structural bridge information and a standardized storage for interoperability with subsequent analysis tools. Since the involved large datasets are only efficiently processed in an automated manner, the implementation of the complete workflow from damage and building data to structural analysis is targeted in this work. First, domain concepts are derived from the back-end tasks: structural analysis, damage modeling, and life-cycle assessment. The common interoperability format, the Industry Foundation Class (IFC), and processes in these domains are further assessed. The need for usercontrolled interpretation steps is identified and the developed prototype thus allows interaction at subsequent model stages. The latter has the advantage that interpretation steps can be individually separated into either a structural analysis or a damage information model or a combination of both. This approach to damage information processing from the perspective of structural analysis is then validated in different case studies.}, subject = {Br{\"u}ckenbau}, language = {en} } @misc{Freire, type = {Master Thesis}, author = {Freire, Kamai}, title = {Panafricanism and African Revolution in Brazilian Music}, doi = {10.25643/bauhaus-universitaet.4353}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210216-43536}, school = {Hochschule f{\"u}r Musik FRANZ LISZT}, pages = {163}, abstract = {This research departs from the teachings of Kwame Ture on the difference between mobilization and organization in the panafricanist struggle to analyze then the use of Music within the anti-racist and anti-colonialist struggle in Brazil.}, subject = {Saz}, language = {en} } @article{FathiSajadzadehMohammadiSheshkaletal., author = {Fathi, Sadegh and Sajadzadeh, Hassan and Mohammadi Sheshkal, Faezeh and Aram, Farshid and Pinter, Gergo and Felde, Imre and Mosavi, Amir}, title = {The Role of Urban Morphology Design on Enhancing Physical Activity and Public Health}, series = {International Journal of Environmental Research and Public Health}, volume = {2020}, journal = {International Journal of Environmental Research and Public Health}, number = {Volume 17, Issue 7, 2359}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ijerph17072359}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200402-41225}, pages = {29}, abstract = {Along with environmental pollution, urban planning has been connected to public health. The research indicates that the quality of built environments plays an important role in reducing mental disorders and overall health. The structure and shape of the city are considered as one of the factors influencing happiness and health in urban communities and the type of the daily activities of citizens. The aim of this study was to promote physical activity in the main structure of the city via urban design in a way that the main form and morphology of the city can encourage citizens to move around and have physical activity within the city. Functional, physical, cultural-social, and perceptual-visual features are regarded as the most important and effective criteria in increasing physical activities in urban spaces, based on literature review. The environmental quality of urban spaces and their role in the physical activities of citizens in urban spaces were assessed by using the questionnaire tool and analytical network process (ANP) of structural equation modeling. Further, the space syntax method was utilized to evaluate the role of the spatial integration of urban spaces on improving physical activities. Based on the results, consideration of functional diversity, spatial flexibility and integration, security, and the aesthetic and visual quality of urban spaces plays an important role in improving the physical health of citizens in urban spaces. Further, more physical activities, including motivation for walking and the sense of public health and happiness, were observed in the streets having higher linkage and space syntax indexes with their surrounding texture.}, subject = {Morphologie}, language = {en} } @article{FaroughiKarimimoshaverArametal., author = {Faroughi, Maryam and Karimimoshaver, Mehrdad and Aram, Farshid and Solgi, Ebrahim and Mosavi, Amir and Nabipour, Narjes and Chau, Kwok-Wing}, title = {Computational modeling of land surface temperature using remote sensing data to investigate the spatial arrangement of buildings and energy consumption relationship}, series = {Engineering Applications of Computational Fluid Mechanics}, volume = {2020}, journal = {Engineering Applications of Computational Fluid Mechanics}, number = {Volume 14, No. 1}, publisher = {Taylor \& Francis}, doi = {https://doi.org/10.1080/19942060.2019.1707711}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200110-40585}, pages = {254 -- 270}, abstract = {The effect of urban form on energy consumption has been the subject of various studies around the world. Having examined the effect of buildings on energy consumption, these studies indicate that the physical form of a city has a notable impact on the amount of energy consumed in its spaces. The present study identified the variables that affected energy consumption in residential buildings and analyzed their effects on energy consumption in four neighborhoods in Tehran: Apadana, Bimeh, Ekbatan-phase I, and Ekbatan-phase II. After extracting the variables, their effects are estimated with statistical methods, and the results are compared with the land surface temperature (LST) remote sensing data derived from Landsat 8 satellite images taken in the winter of 2019. The results showed that physical variables, such as the size of buildings, population density, vegetation cover, texture concentration, and surface color, have the greatest impacts on energy usage. For the Apadana neighborhood, the factors with the most potent effect on energy consumption were found to be the size of buildings and the population density. However, for other neighborhoods, in addition to these two factors, a third factor was also recognized to have a significant effect on energy consumption. This third factor for the Bimeh, Ekbatan-I, and Ekbatan-II neighborhoods was the type of buildings, texture concentration, and orientation of buildings, respectively.}, subject = {Fernerkung}, language = {en} } @phdthesis{Ettinger, author = {Ettinger, Ulrike}, title = {FASHIONABLY NATIONAL! ‚Volkstracht' als Ressource im sozialistischen Rum{\"a}nien aus der Perspektive von Forschung und Kunst}, doi = {10.25643/bauhaus-universitaet.4189}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200702-41891}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {176}, abstract = {Ausgehend von der vielfachen Verwertung der b{\"a}uerlichen Kleidung durch den Staat w{\"a}hrend des Sozialismus in Rum{\"a}nien wird in der Arbeit das ‚Gemacht-Sein' von Volkstrachten befragt entlang von im untersuchten Zeitraum wirkenden Diskursen, wie dem Prozess der Modernisierung oder der Hervorhebung nationaler Werte. Die k{\"u}nstlerische Forschung setzt dabei auf Simulacra (Roland Barthes). Ziel war, tradierte Formate der Wissensaufbereitung und -verbreitung zu appropriieren, so auch von Strategien, die auf der Ebene von Bildern und Sprache agieren, um eine Re-Lekt{\"u}re sowohl von ‚Volkstracht' im Sozialismus als auch von ihren Entsprechungen nach 1989 zu erm{\"o}glichen.}, subject = {Tracht}, language = {de} } @incollection{EmersonEgert, author = {Emerson, Jill and Egert, Gerko}, title = {wie den sozialen Muskel trainieren}, series = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein experimentelles Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4258}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42586}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {71 -- 89}, abstract = {Interview zum Social Muskel Club und dem "Geben und nehmen Spiel"}, subject = {Gabe}, language = {de} } @book{EgertBee, author = {Egert, Gerko and Bee, Julia}, title = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, editor = {Bee, Julia and Egert, Gerko}, publisher = {Nocturne}, address = {Weimar und Berlin}, isbn = {978-3-00-066190-7}, doi = {10.25643/bauhaus-universitaet.4249}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201005-42494}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {183}, abstract = {Das spekulative Handbuch bietet vielf{\"a}ltige Techniken f{\"u}r ein radikales Lernen und Vermitteln. Es umfasst konkrete Anleitungen, Erfahrungen und theoretische {\"U}berlegungen. Die Texte beteiligen sich an der Konzeption einer Vermittlung, die das gemeinsame Experimentieren (wieder) einf{\"u}hrt. Im Seminarraum, in Workshops, auf Festivals, in Fluren, Parks und der Stadt finden Lernen und Verlernen statt. Texte und Anleitungen u. a. zu: Filmessays, Collagen, Bank{\"u}berf{\"a}llen, der Universit{\"a}t der Toten, wildem Schreiben, konzeptuellem speed Dating, neurodiversem Lernen, Format-Denken, dem Theater der Sorge, dem Schreiblabor, dem K{\"o}rperstreik.}, subject = {Experimente}, language = {de} } @incollection{Egert, author = {Egert, Gerko}, title = {Radikale Planung}, series = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin/Weimar}, doi = {10.25643/bauhaus-universitaet.4262}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201009-42628}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {105 -- 118}, abstract = {Radikal Planen kann jede*r. Im Seminar, in der Lesegruppe, bei der Probe, im Studio, bei der politischen Aktion, bei der Textlekt{\"u}re. Man braucht nicht viel - nur viele. Denn planen macht man nicht allein. Eine Gruppe sind viele, Kommilitonen*innen wie Freund*innen, K{\"u}nstler*innen und Genoss*innen…}, subject = {Theater}, language = {de} } @incollection{EckertLinke, author = {Eckert, Lena and Linke, Maja}, title = {Pr{\"a}ludium zur {\"O}ffnung von Denkr{\"a}umen - Kritische Lehre / K{\"u}nstlerisches Forschen}, series = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, booktitle = {Experimente lernen, Techniken tauschen. Ein spekulatives Handbuch}, publisher = {Nocturne}, address = {Berlin und Weimar}, doi = {10.25643/bauhaus-universitaet.4269}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201008-42699}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {335 -- 351}, abstract = {Schreibwalzer GeradekanonischeTexteumgibteine Aura der Unantastbarkeit und es scheint, als br{\"a}uchte man eine gewisse Art der Legitimation, sich diesen auch kritisch anzun{\"a}hern oder mit eigenen Gedanken auf eine Stufe zu stellen. Im Pr{\"a}ludium tasten wir uns phy- sisch mit Schere, Bleistift, Klebestift an diese Schwer- gewichte heran und dar{\"u}ber hinaus; mit Respekt, doch ohne Einsch{\"u}chterung.}, subject = {K{\"u}nstlerische Forschung}, language = {de} } @article{DokhanchiArnoldVogeletal.2020, author = {Dokhanchi, Najmeh Sadat and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Measurement of indoor air temperature distribution using acoustic travel-time tomography: Optimization of transducers location and sound-ray coverage of the room}, series = {Measurement}, volume = {2020}, journal = {Measurement}, number = {Volume 164, article 107934}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.measurement.2020.107934}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220524-46473}, year = {2020}, abstract = {Acoustic travel-time TOMography (ATOM) allows the measurement and reconstruction of air temperature distributions. Due to limiting factors, such as the challenge of travel-time estimation of the early reflections in the room impulse response, which heavily depends on the position of transducers inside the measurement area, ATOM is applied mainly outdoors. To apply ATOM in buildings, this paper presents a numerical solution to optimize the positions of transducers. This optimization avoids reflection overlaps, leading to distinguishable travel-times in the impulse response reflectogram. To increase the accuracy of the measured temperature within tomographic voxels, an additional function is employed to the proposed numerical method to minimize the number of sound-path-free voxels, ensuring the best sound-ray coverage of the room. Subsequently, an experimental set-up has been performed to verify the proposed numerical method. The results indicate the positive impact of the optimal positions of transducers on the distribution of ATOM-temperatures.}, subject = {Bauphysik}, language = {en} } @article{DehghaniSalehiMosavietal., author = {Dehghani, Majid and Salehi, Somayeh and Mosavi, Amir and Nabipour, Narjes and Shamshirband, Shahaboddin and Ghamisi, Pedram}, title = {Spatial Analysis of Seasonal Precipitation over Iran: Co-Variation with Climate Indices}, series = {ISPRS, International Journal of Geo-Information}, volume = {2020}, journal = {ISPRS, International Journal of Geo-Information}, number = {Volume 9, Issue 2, 73}, publisher = {MDPI}, doi = {10.3390/ijgi9020073}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200128-40740}, pages = {23}, abstract = {Temporary changes in precipitation may lead to sustained and severe drought or massive floods in different parts of the world. Knowing the variation in precipitation can effectively help the water resources decision-makers in water resources management. Large-scale circulation drivers have a considerable impact on precipitation in different parts of the world. In this research, the impact of El Ni{\~n}o-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO), and North Atlantic Oscillation (NAO) on seasonal precipitation over Iran was investigated. For this purpose, 103 synoptic stations with at least 30 years of data were utilized. The Spearman correlation coefficient between the indices in the previous 12 months with seasonal precipitation was calculated, and the meaningful correlations were extracted. Then, the month in which each of these indices has the highest correlation with seasonal precipitation was determined. Finally, the overall amount of increase or decrease in seasonal precipitation due to each of these indices was calculated. Results indicate the Southern Oscillation Index (SOI), NAO, and PDO have the most impact on seasonal precipitation, respectively. Additionally, these indices have the highest impact on the precipitation in winter, autumn, spring, and summer, respectively. SOI has a diverse impact on winter precipitation compared to the PDO and NAO, while in the other seasons, each index has its special impact on seasonal precipitation. Generally, all indices in different phases may decrease the seasonal precipitation up to 100\%. However, the seasonal precipitation may increase more than 100\% in different seasons due to the impact of these indices. The results of this study can be used effectively in water resources management and especially in dam operation.}, subject = {Maschinelles Lernen}, language = {en} } @misc{Coenen, author = {Coenen, Ekkehard}, title = {Hans Ruin: Being with the Dead—Burial, ancestral politics, and the roots of historical consciousness}, series = {Human Studies}, volume = {2020}, journal = {Human Studies}, number = {Volume 43}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s10746-020-09565-0}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44712}, pages = {683 -- 689}, abstract = {How can society be thought of as something in which the living and the dead interact throughout history? In Being with the Dead. Burial, Ancestral Politics, and the Roots of Historical Consciousness, Hans Ruin turns to the relationship between the living and the dead as well as 'historical consciousness'. He is referring to the expression 'being with the dead' (Mitsein mit dem Toten). Rather en passant, Martin Heidegger (1962: 282) shaped this existential-ontological term, which so far has hardly received any consideration. But for Ruin, it now forms the starting point for his "expanded phenomenological social ontology" (p. XI). By illuminating history and historical consciousness with the category 'being with the dead,' he gains remarkable insights into the meaning of ancestrality. Concerning 'necropolitics,' Ruin shows that the political space includes the living as well as the dead and how they constitute it. The foci of his considerations are the human sciences, above all sociology, anthropology, archaeology, philology and history. Ruin's book aims at a "metacritical thanatology," which he elaborates as "an exploration of the social ontology of being with the dead mediated through critical analyses of the human-historical sciences themselves" (p. XII). As a result, in a total of seven chapters, he succeeds astonishingly in emphasizing the political and ethical importance of a scientific gaze that cultivates the interaction of the living and the dead.}, subject = {Geschichtswissenschaft}, language = {en} } @phdthesis{Chan, author = {Chan, Chiu Ling}, title = {Smooth representation of thin shells and volume structures for isogeometric analysis}, doi = {10.25643/bauhaus-universitaet.4208}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200812-42083}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {162}, abstract = {The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of "isoparametric", for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.}, subject = {Modellierung}, language = {en} } @article{CerejeirasKaehlerLegatiuketal., author = {Cerejeiras, Paula and K{\"a}hler, Uwe and Legatiuk, Anastasiia and Legatiuk, Dmitrii}, title = {Discrete Hardy Spaces for Bounded Domains in Rn}, series = {Complex Analysis and Operator Theory}, volume = {2021}, journal = {Complex Analysis and Operator Theory}, number = {Volume 15, article 4}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s11785-020-01047-6}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44746}, pages = {1 -- 32}, abstract = {Discrete function theory in higher-dimensional setting has been in active development since many years. However, available results focus on studying discrete setting for such canonical domains as half-space, while the case of bounded domains generally remained unconsidered. Therefore, this paper presents the extension of the higher-dimensional function theory to the case of arbitrary bounded domains in Rn. On this way, discrete Stokes' formula, discrete Borel-Pompeiu formula, as well as discrete Hardy spaces for general bounded domains are constructed. Finally, several discrete Hilbert problems are considered.}, subject = {Dirac-Operator}, language = {en} } @phdthesis{Camerin, author = {Camerin, Federico}, title = {THE ROLE OF THE GREAT PROPERTY IN THE EUROPEAN CITY-MAKING PROCESS IN THE LAST THIRD OF THE 20th CENTURY. MILITARY PROPERTY AS REFERENCE}, doi = {10.25643/bauhaus-universitaet.4201}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200714-42018}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {453}, abstract = {The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called 'great property' in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being 'capital in land', I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century. I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new 'areas of centrality' intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality.}, subject = {Stadtplanung}, language = {en} } @techreport{BuschowWellbrock, author = {Buschow, Christopher and Wellbrock, Christian-Mathias}, title = {Die Innovationslandschaft des Journalismus in Deutschland}, organization = {Landesanstalt f{\"u}r Medien NRW}, doi = {10.25643/bauhaus-universitaet.4240}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200924-42407}, pages = {51}, abstract = {Das vorliegende Gutachten befasst sich mit der Innovationslandschaft des deutschen Journalismus. Innovation wird als eine essenzielle Voraussetzung verstanden, um tragf{\"a}hige L{\"o}sungsans{\"a}tze f{\"u}r die gegenw{\"a}rtigen Probleme des Journa-lismus zu entwickeln. Im Mittelpunkt des Gutachtens steht die Frage, wie Innovationspolitik im Journalismus - d. h. die Unterst{\"u}tzung von Innovation durch die {\"o}ffentliche Hand - funktionst{\"u}chtig ausgestaltet werden kann. Dabei wird dem Innovationssysteme-Ansatz gefolgt, welcher Probleme, Barrieren und Hemmnisse identifiziert, die der Innovationsf{\"a}higkeit des Journalismus in Deutschland grundlegend im Wege stehen.}, subject = {Journalismus}, language = {de} } @article{Buschow, author = {Buschow, Christopher}, title = {Practice-driven journalism research: Impulses for a dynamic understanding of journalism in the context of its reorganization}, series = {Studies in Communication Sciences}, volume = {2020}, journal = {Studies in Communication Sciences}, doi = {10.24434/j.scoms.2020.02.006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200819-42162}, pages = {1 -- 15}, abstract = {This paper proposes a practice-theoretical journalism research approach for an alternate and innovative perspective of digital journalism's current empirical challenges. The practice-theoretical approach is introduced by demonstrating its explanatory power in relation to demarcation problems, technological changes, economic challenges and challenges to journalism's legitimacy. Its respective advantages in dealing with these problems are explained and then compared to established journalism theories. The particular relevance of the theoretical perspective is due to (1) its central decision to observe journalistic practices, (2) the transgression of conventional journalistic boundaries, (3) the denaturalization of journalistic norms and laws, (4) the explicit consideration of a material, socio-technical dimension of journalism, (5) a focus on the conflicting relationship between journalistic practices and media management practices, and (6) prioritizing order generation over stability.}, subject = {Journalismus}, language = {en} } @article{Buschow, author = {Buschow, Christopher}, title = {Why Do Digital Native News Media Fail? An Investigation of Failure in the Early Start-Up Phase}, series = {Media and Communication}, volume = {2020}, journal = {Media and Communication}, number = {Volume 8, Issue 2}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/mac.v8i2.2677}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200417-41347}, pages = {51 -- 61}, abstract = {Digital native news media have great potential for improving journalism. Theoretically, they can be the sites where new products, novel revenue streams and alternative ways of organizing digital journalism are discovered, tested, and advanced. In practice, however, the situation appears to be more complicated. Besides the normal pressures facing new businesses, entrepreneurs in digital news are faced with specific challenges. Against the background of general and journalism specific entrepreneurship literature, and in light of a practice-theoretical approach, this qualitative case study research on 15 German digital native news media outlets empirically investigates what barriers curb their innovative capacity in the early start-up phase. In the new media organizations under study here, there are—among other problems—a high degree of homogeneity within founding teams, tensions between journalistic and economic practices, insufficient user orientation, as well as a tendency for organizations to be underfinanced. The patterns of failure investigated in this study can raise awareness, help news start-ups avoid common mistakes before actually entering the market, and help industry experts and investors to realistically estimate the potential of new ventures within the digital news industry.}, subject = {Journalismus}, language = {en} } @phdthesis{Bunte, author = {Bunte, Andreas}, title = {Entwicklung einer ontologiebasierten Beschreibung zur Erh{\"o}hung des Automatisierungsgrades in der Produktion}, doi = {10.25643/bauhaus-universitaet.4315}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201215-43156}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {189}, abstract = {Die zu beobachtenden k{\"u}rzeren Produktlebenszyklen und eine schnellere Marktdurchdringung von Produkttechnologien erfordern adaptive und leistungsf{\"a}hige Produktionsanlagen. Die Adaptivit{\"a}t erm{\"o}glicht eine Anpassung der Produktionsanlage an neue Produkte, und die Leistungsf{\"a}higkeit der Anlage stellt sicher, dass ausreichend Produkte in kurzer Zeit und zu geringen Kosten hergestellt werden k{\"o}nnen. Durch eine Modularisierung der Produktionsanlage kann die Adaptivit{\"a}t erreicht werden. Jedoch erfordert heutzutage jede Adaption manuellen Aufwand, z.B. zur Anpassung von propriet{\"a}ren Signalen oder zur Anpassung {\"u}bergeordneter Funktionen. Dadurch sinkt die Leistungsf{\"a}higkeit der Anlage. Das Ziel dieser Arbeit ist es, die Interoperabilit{\"a}t in Bezug auf die Informationsverwendung in modularen Produktionsanlagen zu gew{\"a}hrleisten. Dazu werden Informationen durch semantische Modelle beschrieben. Damit wird ein einheitlicher Informationszugriff erm{\"o}glicht, und {\"u}bergeordnete Funktionen erhalten Zugriff auf alle Informationen der Produktionsmodule, unabh{\"a}ngig von dem Typ, dem Hersteller und dem Alter des Moduls. Dadurch entf{\"a}llt der manuelle Aufwand bei Anpassungen des modularen Produktionssystems, wodurch die Leistungsf{\"a}higkeit der Anlage gesteigert und Stillstandszeiten reduziert werden. Nach dem Ermitteln der Anforderungen an einen Modellierungsformalismus wurden potentielle Formalismen mit den Anforderungen abgeglichen. OWL DL stellte sich als geeigneter Formalismus heraus und wurde f{\"u}r die Erstellung des semantischen Modells in dieser Arbeit verwendet. Es wurde exemplarisch ein semantisches Modell f{\"u}r die drei Anwendungsf{\"a}lle Interaktion, Orchestrierung und Diagnose erstellt. Durch einen Vergleich der Modellierungselemente von unterschiedlichen Anwendungsf{\"a}llen wurde die Allgemeing{\"u}ltigkeit des Modells bewertet. Dabei wurde gezeigt, dass die Erreichung eines allgemeinen Modells f{\"u}r technische Anwendungsf{\"a}lle m{\"o}glich ist und lediglich einige Hundert Begriffe ben{\"o}tigt. Zur Evaluierung der erstellten Modelle wurde ein wandlungsf{\"a}higes Produktionssystem der SmartFactoryOWL verwendet, an dem die Anwendungsf{\"a}lle umgesetzt wurden. Dazu wurde eine Laufzeitumgebung erstellt, die die semantischen Modelle der einzelnen Module zu einem Gesamtmodell vereint, Daten aus der Anlage in das Modell {\"u}bertr{\"a}gt und eine Schnittstelle f{\"u}r die Services bereitstellt. Die Services realisieren {\"u}bergeordnete Funktionen und verwenden die Informationen des semantischen Modells. In allen drei Anwendungsf{\"a}llen wurden die semantischen Modelle korrekt zusammengef{\"u}gt und mit den darin enthaltenen Informationen konnte die Aufgabe des jeweiligen Anwendungsfalles ohne zus{\"a}tzlichen manuellen Aufwand gel{\"o}st werden.}, subject = {Ontologie}, language = {de} }