@article{MisztalMisztal1997, author = {Misztal, S. and Misztal, G.}, title = {Anwendung von Delta-Dirac-Funktion und Heviside-Funktion zur Berechnung der inneren Kr{\"a}fte und Verschiebungen in gebogenen Balken}, doi = {10.25643/bauhaus-universitaet.530}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5308}, year = {1997}, abstract = {Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erw{\"a}hnten Funktionen dargestellt. Dar{\"u}ber hinaus wird die M{\"o}glichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle F{\"a}lle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen L{\"o}sungen geben die M{\"o}glichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen erm{\"o}glicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die M{\"o}glichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen.}, subject = {Balken}, language = {de} } @article{MenzelMahdaviHartkopfetal.1997, author = {Menzel, Karsten and Mahdavi, A. and Hartkopf, V. and Lee, S.}, title = {Information technology for construction management and building performance evaluation support - a North-American perspective}, doi = {10.25643/bauhaus-universitaet.491}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4917}, year = {1997}, abstract = {We provide a critical overview of the current status of computational support for construction the management and building performance evaluation in North-America. This overview is based on the research conducted in relation to the design and construction of the Intelligent Workplace (IW), Carnegie Mellon University, Pittsburgh, Pennsylvania, USA. With regard to the commercial software products in the field of construction management the following limitations can be identified: Although project planning, cost estimating and construction simulation are supported, tasks like bidding as well as site and material management have not received the same level of attention. Few project management software packages are integrated in a total design support software system. Little analysis or evaluation options are provided to support managerial decision making. Various research groups address the construction planning and scheduling, construction contracting, site layout generation as well as the integration of these three topics. Currently problems such as efficient material management and calculation of environmental and energy responsive site management are insufficiently addressed within the ongoing research projects. In the domain of building performance simulation and decision support one can notice that, the development and application of computational tools is industry driven. As a result the concerns addressed by the tools are mainly issues pertaining to the selection and sizing of systems and components rather than an integrated performance evaluation. Consequently, these programs are rarely used by building designers, especially in the early design stages, where the predictive capabilities of simulation tools could be of significant value. Although many research institutions address the necessity for the integration of performance simulation within the overall design support environments most of the practically available performance simulation tools still remain mono-dimensional and isolated.}, subject = {Bauausf{\"u}hrung}, language = {en} } @article{DonathPetzold1997, author = {Donath, Dirk and Petzold, Frank}, title = {Zuk{\"u}nftige Techniken f{\"u}r eine computergest{\"u}tzte Planungspraxis - applikative Tools f{\"u}r die architektonische Bestandserfassung}, doi = {10.25643/bauhaus-universitaet.496}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4962}, year = {1997}, abstract = {Der Beitrag beschreibt die Entwicklung eines Softwaresystems zur strukturierten Erfassung und Verwaltung bestehender Geb{\"a}ude in der Architektur. Die Erfassung erfolgt durch die Aufnahme von geometrischen Daten und Sachdaten in unterschiedlichen Abstraktionsstufen unter Einbeziehung einer vorangehenden Dekomposition. Basis f{\"u}r die Entwicklung eines solchen Systems ist die Analyse und Systematik der Erfassungstechniken, -abl{\"a}ufe und der Gegenstand der architektonischen Bestandsaufnahme. Parallel hierzu erfolgt die Bewertung und Nutzung aktueller Techniken und Werkzeuge der applikativen Informatik. Schwerpunkte der Forschungsarbeit sind die Ableitung einer allgemeinen Geb{\"a}ude- und Bauteilstruktur, die Einbeziehung aktueller informationstechnischer Verfahren und Werkzeuge und die Entwicklung eines entsprechenden Experimentalsystems. Auf eine Auswahl softwaretechnischer Entwicklungen wird n{\"a}her eingegangen (objektspezifische Eigenschaften, flexible Geometrieerfassung und Benutzeroberfl{\"a}chen).}, subject = {Bauaufnahme}, language = {de} } @inproceedings{Wolff1997, author = {Wolff, Ulrich}, title = {Konzept zur rechnergest{\"u}tzten integrierten Projektsteuerung im Bauwesen}, doi = {10.25643/bauhaus-universitaet.453}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4531}, year = {1997}, abstract = {Projektsteuerung gewinnt als Aufgabenfeld bei der Realisierung von Investitionsprojekten st{\"a}ndig an Bedeutung. Zur Bew{\"a}ltigung der umfangreichen und komplizierten Aufgaben des Projektsteuerers wird zunehmend Software angeboten und genutzt. Dabei ist feststellbar, daß von einer integrierten Projektsteuerung unter Ber{\"u}cksichtigung der Kriterien Leistung, Termin und Kosten nicht gesprochen werden kann, weil wesentliche theoretische und praktische Voraussetzungen fehlen. Im Beitrag werden Defizite der praktizierten Vorgehensweise und L{\"o}sungsans{\"a}tze f{\"u}r eine integrierte rechnergest{\"u}tzte Projektsteuerung vorgestellt. Durch geeignete Formen der Projektstrukturierung und eine Kopplung auf dem Mark befindlicher Standardsoftware k{\"o}nnen geeignete L{\"o}sungen gefunden werden. Problempunkte dabei stellen die Schnittstellen zwischen den Anwenderprogrammen die Datenbeschaffung und -verwaltung sowie geeignete Verfahren zur Kostenermittlung und -verfolgung dar. Im Beitrag werden eine bereits praktizierte und eine in Entwicklung befindliche L{\"o}sung vorgestellt.}, subject = {Bauwesen}, language = {de} } @inproceedings{Hoelzer2003, author = {H{\"o}lzer, Wolfgang}, title = {Advanced Planning and Scheduling Systems: Optimierungsmethoden in der interaktiven Entscheidungsunterst{\"u}tzung auf Basis von ERP und Feinplanung}, doi = {10.25643/bauhaus-universitaet.308}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3080}, year = {2003}, abstract = {Seit die Datenverarbeitung in ihrer Komplexit{\"a}t sich der Thematik des Computer Integrated Manufacturing widmet geh{\"o}rt die Produktionsplanung und Steuerung zu jenen Bereichen, in denen eine Computerunterst{\"u}tzung am vordringlichsten erschien. Sp{\"a}ter sind betriebswirtschaftliche Gesamtl{\"o}sungen entstanden, die (bis heute recht unpr{\"a}zise) als Enterprise Resource Planning (ERP)-Systeme bezeichnet werden und in ihren Logistik-Modulen auch Funktionen der Produktionsplanung abdecken. Alle bekannten MRP-, PPS- und auch ERP-Systeme beruhen auf einer Sukzessivplanung. Advanced Planning and Scheduling (APS) Systems finden seit etwa 1995 zunehmend Interesse. Neben Demand Planning, Production Planning and Scheduling, Distribution Planning, Transportation Planning und Supply Chain Planning werden L{\"o}sungen f{\"u}r Anzahl und Standorte von Produktionsst{\"a}tten und Auslieferungslagern, Zuordnung zu Produktionsst{\"a}tten, Kapazit{\"a}tsbestimmung f{\"u}r Arbeitskr{\"a}fte und Betriebsmittel je Standort, Lagerhaltung je Teil und Lager, Bestimmung ben{\"o}tigter Transportmittel und H{\"a}ufigkeit ihres Einsatzes, Zuordnung von Lagern zu Produktionsst{\"a}tten von M{\"a}rkten zu Lagern u.a.m. von APS-Systemen erwartet. D.h. APS-Systeme erg{\"a}nzen ERP-L{\"o}sungen, nutzen die bereits durch das ERP-System vorhandenen Daten und ben{\"o}tigen neuartige Algorithmen und (Meta-) Heuristiken. Im Rahmen des Vortrages werden Modelle und Echtzeitalgorithmen zur Optimierung der Logistik f{\"u}r Prozesse mit kurzfristigen Anforderungen, geographisch verteilter Produktion, Lagerhaltung der Ausgangs-, Zwischen- und Endprodukte und wechselnden Transport-Bedingungen aus der Sicht der praktischen Umsetzung und Anwendung in Form einer ASP-L{\"o}sung aufgezeigt und diskutiert.}, subject = {Produktionsplanung}, language = {de} } @inproceedings{AmezianeLasserre2003, author = {Ameziane, Farid and Lasserre, Stephane}, title = {SYSBAT - An Application to the Building ProductionBased on Computer Supported Cooperative Work}, doi = {10.25643/bauhaus-universitaet.274}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2748}, year = {2003}, abstract = {Our proposed solution is to enable partners of a construction project to share all the technical data produced and handled during the building production process by building a system through the use of internet technology. The system links distributed databases and allows building partners to access remotely and manipulate specific information. It provides an updated building representation that is being enriched and refined all along the building production process. A recent collaboration with Nemetschek France (subsidiary company of Nemetschek AG, AEC CAD software leader) focus on a building product repository available in a web context. The aim is to help building project actors to choose a technical solution that fits its professional needs, and maintain our information system with up to date information. It starts with the possibility to build on line building product catalogs, in order to link Allplan CAD entities with building technical features. This paper presents the conceptual approaches on which our information system is built. Starting from a general organization diagram organization, we focus on the product and the description branches of construction works (including last IFC model specifications). Our aim is to add decisional support to the construction works selection process. To do so, we consider the actor's role upon the system and the pieces of information each one needs to achieve a given task.}, subject = {Bauplanung}, language = {en} } @inproceedings{BerbigMenzelEisenblaetter2003, author = {Berbig, Torsten and Menzel, Karsten and Eisenbl{\"a}tter, Karin}, title = {"Mobile Computing" - Anforderungen \& Einf{\"u}hrungsstratgie aus Sicht der Baupraxis}, doi = {10.25643/bauhaus-universitaet.294}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2948}, year = {2003}, abstract = {Die Sicherung der Wettbewerbsf{\"a}higkeit im Bereich des Bauwesens, insbesondere kleinerer und mittelst{\"a}ndischer Betriebe erfordert ein aktives Handeln als Antwort auf die sich {\"a}ndernde Wettbewerbssituation. Einen wesentlichen Wettbewerbsvorteil k{\"o}nnen kleine unternehmerische Einheiten durch h{\"o}here Flexibilit{\"a}t, schnelle Reaktion auf Kundenw{\"u}nsche oder aktuelle Situationen auf der Baustelle und Marktn{\"a}he erreichen. Dazu ist es n{\"o}tig, die Informations- und Kommunikationsstr{\"o}me durch Einsatz standardisierter und kosteng{\"u}nstiger Hard- und Software wie z.B. Handhelds zu unterst{\"u}tzen und insbesondere die existierenden Hindernisse im Informationsfluss zwischen Baustelle und B{\"u}ro zu beseitigen. Am Beispiel der Projekte >IuK - SystemBau< und >eSharing< wird eine Einf{\"u}hrungsstrategie f{\"u}r >Mobile Computing< in kleinen unternehmerischen Einheiten des Bauwesens (KMU) basierend auf einer umfangreichen Anforderungsanalyse vorgestellt. Folgende Aspekte sollen beschrieben werden: durchg{\"a}ngiger Einsatz der Technik unter Beachtung der verschiedenen Qualifikationsniveaus, Einf{\"u}hrungsunterst{\"u}tzung durch Schulungen, Prozessanalyse und m{\"o}gliche Integration in bestehende Software-Umgebungen sowie Feldtests.}, subject = {Bauablauf / Ablaufplanung}, language = {de} } @inproceedings{BilekHartmann2003, author = {Bilek, Jochen and Hartmann, Dietrich}, title = {Agentenbasiertes Kooperationsmodell zur Unterst{\"u}tzung vernetzter Planungsprozesse in der Tragwerksplanung}, doi = {10.25643/bauhaus-universitaet.279}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2791}, year = {2003}, abstract = {Die heutige Situation in der Tragwerksplanung ist durch das kooperative Zusammenwirken einer gr{\"o}ßeren Anzahl von Fachleuten verschiedener Disziplinen (Architektur, Tragwerksplanung, etc.) in zeitlich befristeten Projektgemeinschaften gekennzeichnet. Bei der Abstimmung der hierdurch bedingten komplexen, dynamischen und vernetzten Planungsprozesse kommt es dabei h{\"a}ufig zu Planungsm{\"a}ngeln und Qualit{\"a}tseinbußen. Dieser Artikel zeigt auf, wie mit Hilfe der Agententechnologie L{\"o}sungsans{\"a}tze zur Verbesserung der Planungssituation erreicht werden k{\"o}nnen. Hierzu wird ein Agentenmodell f{\"u}r die vernetzt-kooperative Tragwerksplanung vorgestellt und anhand der Planung einer Fußg{\"a}ngerbogenbr{\"u}cke anschaulich demonstriert. Das Agentenmodell erfasst (1) die beteiligten Fachplaner und Organisationen, (2) die tragwerksspezifischen Planungsprozesse, (3) die zugeh{\"o}rigen (Teil-)Produktmodelle und (4) die genutzte (Ingenieur-)Software. Hieraus leiten sich die drei Teilmodelle (1) agentenbasiertes Kooperationsmodell, (2) agentenbasierte Produktmodellintegration und (3) Modell zur agentenbasierten Software-Integration ab. Der Fokus des Artikels liegt auf der Darstellung des agentenbasierten Kooperationsmodells.}, subject = {Tragwerk}, language = {de} } @inproceedings{KellerAntoniadisMenzel2004, author = {Keller, Martin and Antoniadis, George and Menzel, Karsten}, title = {Resource Management for the Construction Industry}, doi = {10.25643/bauhaus-universitaet.167}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1679}, year = {2004}, abstract = {The management of resources is an essential task in each construction company. Today, ERP systems and e-Business systems are available to assist construction companies to efficiently organise the allocation of their personnel and equipment within the company, but they cannot provide the company with the idle resources for every single task that has to be performed during a construction project. Therefore, companies should have an alternative solution to better exploit expensive resources and compensate their fixed costs, but also have them available at the right time for their own business activities. This paper outlines the approach taken by the EU funded project "e-Sharing" (IST-2001-33325) to support resource management between construction companies. It will describe requirements for the management of construction resources, its core features, and the integration approach. Therefore, we will outline the approach of an integrated resource type model supporting the management and classification of construction equipment, construction tasks and qualification profiles. The development is based on a cross-domain analysis and evaluation of existing models. ...}, subject = {Baubetrieb}, language = {en} } @inproceedings{KoenigKlingerBerkhahn2004, author = {K{\"o}nig, Markus and Klinger, Axel and Berkhahn, Volker}, title = {Structural Correctness of Planning Processes in Building Engineering}, doi = {10.25643/bauhaus-universitaet.169}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1690}, year = {2004}, abstract = {The planning of projects in building engineering is a complex process which is characterized by a dynamical composition and many modifications during the definition and execution time of processes. For a computer-aided and network-based cooperation a formal description of the planning process is necessary. In the research project "Relational Process Modelling in Cooperative Building Planning" a process model is described by three parts: an organizational structure with participants, a building structure with states and a process structure with activities. This research project is part of the priority program 1103 "Network-Based Cooperative Planning Processes in Structural Engineering" promoted by the German Research Foundation (DFG). Planning processes in civil engineering can be described by workflow graphs. The process structure describes the logical planning process and can be formally defined by a bipartite graph. This structure consists of activities, transitions and relationships between activities and transitions. In order to minimize errors at execution time of a planning process a consistent and structurally correct process model must be guaranteed. This contribution considers the concept and the algorithms for checking the consistency and the correctness of the process structure.}, subject = {Baubetrieb}, language = {de} } @inproceedings{Palm2004, author = {Palm, Johan}, title = {Integrated Engineering Workflow focused on the Structural Engineering in the Industrial Environment}, doi = {10.25643/bauhaus-universitaet.162}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1625}, year = {2004}, abstract = {The engineering and construction industry has been slow to exploit the full potential of information technology. The industry is highly fragmented, price sensitive, risk-adverse, and profit margins are small. Each project is unique with a small amount of technological innovation opportunities to capitalise on from one project to the next. Technological innovations that have been taking place are just simulating the old traditional paper workflow. Engineering information in digital form is being conveyed using traditional paper representations, which have to be interpreted by humans before the information can be used in other applications, thereby creating 'islands of information'. It can be seen that poorly implemented IT strategies are duplicating paperwork, rather than reducing or eliminating it (Crowley et al., 2000). This paper will introduce the Integrated Engineering Workflow (IEW) concept to re-organise a structural discipline working on multi-disciplinary projects so as to maximise the advantages offered by new information technology.}, subject = {Baubetrieb}, language = {en} } @inproceedings{BiltchoukPahl2004, author = {Biltchouk, Irina and Pahl, Peter Jan}, title = {Interaction of Data Bases and Graphical Interfaces in Civil Engineering}, doi = {10.25643/bauhaus-universitaet.163}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1636}, year = {2004}, abstract = {Applications for civil engineering tasks usually contain graphical user interfaces for the engineering processes. Persistent objects of the applications are stored to data bases. The influence of the interaction between a graphical user interface and a data base for the development of an civil engineering application is investigated in this paper. A graphic application for the linear elastic analysis of plane frames, which was previously developed with standard tools of the Java platform, is compared to a redesigned implementation using a generalized data base for persistent objects. The investigation leads to the following results : - A strict distinction between persistent and transient objects influences the class structure of an application, in particular the class structure of a graphical user interface. - The structure of an application depends on the logic for updating of references to persistent and transient graphical objects after an application is read from a file. - The complexity of the reference management can usually be handled better by just in time referencing associated with String - identifiers rather than by automated referencing associated with Name - identifiers.}, subject = {Baubetrieb}, language = {en} } @inproceedings{Zaneldin2004, author = {Zaneldin, Essam}, title = {Investigate the Impact of Different Resource Allocation Strategies on the Design of Building Projects Using Simulation}, doi = {10.25643/bauhaus-universitaet.165}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1658}, year = {2004}, abstract = {The design of building projects involves several types of resources such as architects, structural engineers, mechanical engineers, electrical engineers, and draftsmen, among others. For design firms to stay in business in this very competitive market, they need to manage their resources in a way that improves productivity and cost effectiveness. This task, however, is not simple and requires thorough analysis of process-level operations, resource use, and productivity. Typically, these operational aspects are the responsibility of the design office manager who assigns available resources to the different design projects to save time and lower design expenses. It is noted that limited studies have been carried out in the literature to model overall organizational operations and behavioral aspects, particularly in firms specialized in the design of building projects. In an effort to simplify the modeling process, a simplified modeling and simulation tool is used in this research. A simulation model representing an actual design office was developed assuming that the office performs designs for small, medium, and large size building projects. The developed model was used to simulate several alternatives and examine various resource assignment strategies. The simulation was conducted over ten years and the resulting productivity and income was measured.}, subject = {Baubetrieb}, language = {en} } @inproceedings{Huhnt2004, author = {Huhnt, Wolfgang}, title = {Progress Measurement in Planning Processes on the Base of Process Models}, doi = {10.25643/bauhaus-universitaet.166}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1664}, year = {2004}, abstract = {This paper presents a specific modeling technique that is focused on preparing planning processes in civil engineering. Planning processes in civil engineering are characterized by some peculiarities so that the sequence of planning tasks needs to be determined for each planning project. Neither the use of optimized partial processes nor the use of lower detailed and optimized processes guarantee an optimal overall planning process. The modeling technique considers these peculiarities. In a first step, it is focused on the logic of the planning process. Algorithms based on the graph theory determine that logic. This approach ensures consistency and logical correctness of the description of a planning process at the early beginning in its preparation phase. Sets of data - the products of engineers like technical drawings, technical models, reports, or specifications - form the core of the presented modeling technique. The production of these sets of data requires time and money. This is expressed by a specific weighting of each set of data in the presented modeling technique. The introduction of these weights allows an efficient progress measurement and controlling of a planning project. For this purpose, a link between the modeling technique used in the preparation phase and the execution phase is necessary so that target and actual values are available for controlling purposes. The present paper covers the description of this link. An example is given to illustrate the use of the modeling technique for planning processes in civil engineering projects.}, subject = {Baubetrieb}, language = {en} } @inproceedings{ElRayesKandil2004, author = {El-Rayes, Khaled and Kandil, Amr}, title = {Distributed Computing for the Optimization of Large-Scale Construction Projects}, doi = {10.25643/bauhaus-universitaet.160}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1601}, year = {2004}, abstract = {Available construction time-cost trade-off analysis models can be used to generate trade-offs between these two important objectives, however, their application is limited in large-scale construction projects due to their impractical computational requirements. This paper presents the development of a scalable and multi-objective genetic algorithm that provides the capability of simultaneously optimizing construction time and cost large-scale construction projects. The genetic algorithm was implemented in a distributed computing environment that utilizes a recent standard for parallel and distributed programming called the message passing interface (MPI). The performance of the model is evaluated using a set of measures of performance and the results demonstrate the capability of the present model in significantly reducing the computational time required to optimize large-scale construction projects.}, subject = {Baubetrieb}, language = {en} } @inproceedings{RueppelKlauer2004, author = {Rueppel, Uwe and Klauer, Thomas}, title = {Internet-based Workflow-Management for Civil Engineering Projects}, doi = {10.25643/bauhaus-universitaet.164}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1647}, year = {2004}, abstract = {The growing competition pressure in the building industry increases the demands on the design and construction processes in respect to economical, technical and time aspects. These demands require efficient improvements of the value-added chain, which can be realized mainly with the usage of innovative information- and communication-technologies. To support the collaboration of all participants involved in a certain building project the Workflow-Management-System "BauKom-Online" has been developed. In the focus of the system is to support the coordination of the participants and their information exchange. Such a software-method is well suited to ensure a high quality planning process. The modelling of business-processes enables a better self-comprehension of the participants work and helps to enhance the project performance. The system architecture of BauKom-Online contains two basic components: the processmodelling tool and the workflow-engine. The process-model contains of activities and states of the planning and construction processes and their relations. These connected processes compose the workflow. Such a process-model for engineering purposes has to satisfy several needs, e.g., the consideration of planning and building alternatives, dynamic changes of the model during execution of the project and the linkage to further technical objects like costs, building structure, specifications and documentmanagement. Furthermore, the scheduling of the project can be done within the process-model and can be visualized as a Gantt-diagram. ...}, subject = {Baubetrieb}, language = {en} } @inproceedings{RueppelGutzke2004, author = {Rueppel, Uwe and Gutzke, Thomas}, title = {Groundwater-Monitoring based on dynamic co-operative eGovernment-Processes}, doi = {10.25643/bauhaus-universitaet.161}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1611}, year = {2004}, abstract = {As a result of the pilot-project "Grundwasser-Online" the supervision and the active controlling of large monitoring- and catchment-areas are realised by a co-operative integration of all related institutions, a synchronisation-process to combine all distributed data into one central server database, and a high-level eGovernment-Service to provide evaluated information over the internet. Based on this software system the local authorities are able to supervise the groundwater-levels and to find adequate decisions, which finally result in official permissions for the usage of groundwater-reservoirs by the water supply companies.}, subject = {Baubetrieb}, language = {en} } @inproceedings{FreundtBeucke2004, author = {Freundt, Martin and Beucke, Karl}, title = {A flexible model for scheduling building processes based on graph theory and fuzzy numbers}, doi = {10.25643/bauhaus-universitaet.158}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1587}, year = {2004}, abstract = {The methods currently used for scheduling building processes have some major advantages as well as disadvantages. The main advantages are the arrangement of the tasks of a project in a clear, easily readable form and the calculation of valuable information like critical paths. The main disadvantage on the other hand is the inflexibility of the model caused by the modeling paradigms. Small changes of the modeled information strongly influence the whole model and lead to the need to change many more details in the plan. In this article an approach is introduced allowing the creation of more flexible schedules. It aims towards a more robust model that lowers the need to change more than a few information while being able to calculate the important propositions of the known models and leading to further valuable conclusions.}, subject = {Baubetrieb}, language = {en} } @inproceedings{PerevalovaPahl2004, author = {Perevalova, Julia and Pahl, Peter Jan}, title = {Structural and Functional Dependence of Objects in Data Bases}, doi = {10.25643/bauhaus-universitaet.168}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1683}, year = {2004}, abstract = {Let the information of a civil engineering application be decomposed into objects of a given set of classes. Then the set of objects forms the data base of the application. The objects contain attributes and methods. Properties of the objects are stored in the attributes. Algorithms which the objects perform are implemented in the methods of the objects. If objects are modified by a user, the consistency of data in the base is destroyed. The data base must be modified in an update to restore its consistency. The sequence of the update operations is not arbitrary, but is governed by dependence between the objects. The situation can be described mathematically with graph theory. The available algorithms for the determination of the update sequence are not suitable when the data base is large. A new update algorithm for large data bases has been developed and is presented in this paper.}, subject = {Baubetrieb}, language = {en} } @inproceedings{KopytoPetersenDiaz2004, author = {Kopyto, Martin and Petersen, Michael and Diaz, Joaquin}, title = {Cost and Schedule Controlling in Relation to Liquidity Management during Construction Projects}, doi = {10.25643/bauhaus-universitaet.159}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1599}, year = {2004}, abstract = {The present paper describes a software application which can be used for relating the scheduled events of a construction project with the respective financial parameters, leading to an overall improvement in general controlling and liquidity management. For this purpose, existing construction schedules are taken and details of the assignment are recorded. Thus it becomes possible to assess a future payment status should changes in the designated schedule occur.}, subject = {Baubetrieb}, language = {en} } @inproceedings{BaitschHartmann, author = {Baitsch, Matthias and Hartmann, Dietrich}, title = {A FRAMEWORK FOR THE INTERACTIVE VISUALIZATION OF ENGINEERING MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2919}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29194}, pages = {9}, abstract = {Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new - engineering model specific - filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile.}, subject = {Architektur }, language = {en} } @inproceedings{Eickelkamp, author = {Eickelkamp, Jens Peter}, title = {LIQUIDIT{\"A}TSPLANUNG VON BAUPROJEKTEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2948}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29483}, pages = {12}, abstract = {Die Liquidit{\"a}tsplanung von Bauunternehmen XE "Liquidit{\"a}tsplanung" gilt als ein wesentliches Steuerungs-, Kontroll- sowie Informationsinstrument f{\"u}r interne und externe Adressaten und {\"u}bt eine Entscheidungsunterst{\"u}tzungsfunktion aus. Da die einzelnen Bauprojekte einen wesentlichen Anteil an den Gesamtkosten des Unternehmens ausmachen, besitzen diese auch einen erheblichen Einfluß auf die Liquidit{\"a}t und die Zahlungsf{\"a}higkeit der Bauunternehmung. Dem folgend ist es in der Baupraxis eine {\"u}bliche Verfahrensweise, die Liquidit{\"a}tsplanung zuerst projektbezogen zu erstellen und anschließend auf Unternehmensebene zu verdichten. Ziel der Ausf{\"u}hrungen ist es, die Zusammenh{\"a}nge von Arbeitskalkulation XE "Arbeitskalkulation" , Ergebnisrechnung XE "Ergebnisrechnung" und Finanzrechnung XE "Finanzrechnung" in Form eines deterministischen XE "Erkl{\"a}rungsmodells" Planungsmodells auf Projektebene darzustellen. Hierbei soll das Verst{\"a}ndnis und die Bedeutung der Verkn{\"u}pfungen zwischen dem technisch-orientierten Bauablauf und dessen Darstellung im Rechnungs- und Finanzwesen herausgestellt werden. Die Vorg{\"a}nge aus der Bauabwicklung, das heißt die Abarbeitung der Bauleistungsverzeichnispositionen und deren zeitliche Darstellung in einem Bauzeitenplan sind periodisiert in Gr{\"o}ßen der Betriebsbuchhaltung (Leistung, Kosten) zu transformieren und anschließend in der Finanzrechnung (Einzahlungen., Auszahlungen) nach Kreditoren und Debitoren aufzuschl{\"u}sseln.}, subject = {Architektur }, language = {de} } @inproceedings{StoimenovaLinsDatchevaetal., author = {Stoimenova, Eugenia and Lins, Yvonne and Datcheva, Maria and Schanz, Tom}, title = {INVERSE MODELLING OF SOIL HYDRAULIC CHARACTERISTIC FUNCTIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2985}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29858}, pages = {12}, abstract = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content θ and suction ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of θ for any position along the column and (b) give the functional form for the scanning curves.}, subject = {Architektur }, language = {en} } @inproceedings{SchapkeSchererKatranuschkov, author = {Schapke, Sven-Eric and Scherer, Raimar J. and Katranuschkov, Peter}, title = {SEMANTIC SERVICE ENVIRONMENTS FOR INTEGRATING TEXT WITH MODEL-BASED INFORMATION IN AEC/FM}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3012}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30125}, pages = {10}, abstract = {In distributed project organisations and collaboration there is a need for integrating unstructured self-contained text information with structured project data. We consider this a process of text integration in which various text technologies can be used to externalise text content and consolidate it into structured information or flexibly interlink it with corresponding information bases. However, the effectiveness of text technologies and the potentials of text integration greatly vary with the type of documents, the project setup and the available background knowledge. The goal of our research is to establish text technologies within collaboration environments to allow for (a) flexibly combining appropriate text and data management technologies, (b) utilising available context information and (c) the sharing of text information in accordance to the most critical integration tasks. A particular focus is on Semantic Service Environments that leverage on Web service and Semantic Web technologies and adequately support the required systems integration and parallel processing of semi-structured and structured information. The paper presents an architecture for text integration that extends Semantic Service Environments with two types of integration services. Backbone to the Information Resource Sharing and Integration Service is a shared environment ontology that consolidates information on the project context and the available model, text and general linguistic resources. It also allows for the configuration of Semantic Text Analysis and Annotation Services to analyse the text documents as well as for capturing the discovered text information and sharing it through semantic notification and retrieval engines. A particular focus of the paper is the definition of the overall integration process configuring a complementary set of analyses and information sharing components.}, subject = {Architektur }, language = {en} } @inproceedings{TrummerDenzlerSuesse, author = {Trummer, Michael and Denzler, J. and S{\"u}ße, Herbert}, title = {PRECISE 3D MEASUREMENT WITH STANDARD MEANS AND MINIMIAL USER INTERACTION - EXTENDED SINGLE-VIEW RECONSTRUCTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3028}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30282}, pages = {8}, abstract = {The paper proposes a new method for general 3D measurement and 3D point reconstruction. Looking at its features, the method explicitly aims at practical applications. These features especially cover low technical expenses and minimal user interaction, a clear problem separation into steps that are solved by simple mathematical methods (direct, stable and optimal with respect to least error squares), and scalability. The method expects the internal and radial distortion parameters of the used camera(s) as inputs, and a plane quadrangle with known geometry within the scene. At first, for each single picture the 3D position of the reference quadrangle (with respect to each camera coordinate frame) is calculated. These 3D reconstructions of the reference quadrangle are then used to yield the relative external parameters of each camera regarding the first one. With known external parameters, triangulation is finally possible. The differences from other known procedures are outlined, paying attention to the stable mathematical methods (no usage of nonlinear optimization) and the low user interaction with good results at the same time.}, subject = {Architektur }, language = {en} } @inproceedings{MisyuraVolkova, author = {Misyura, E. and Volkova, Viktorija}, title = {APPLICATION OF THE MATHEMATICAL METHODS TO INVESTIGATION OF DYNAMICAL PROPERTIES OF A CABLE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3031}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30313}, pages = {7}, abstract = {The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes.}, subject = {Architektur }, language = {en} } @inproceedings{KimuraMakinoMaegaitoetal., author = {Kimura, Atsushi and Makino, Y. and Maegaito, Kentaro and Suzuki, Osamu}, title = {ITERATION DYNAMICAL SYSTEMS OF DISCRETE LAPLACIANS ON THE PLANE LATTICE (II) (THE VISUAL IMPRESSIONS GIVEN BY DESIGN-PATTERNS)}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2973}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29731}, pages = {4}, abstract = {The present study was designed to investigate the underlying factors determining the visual impressions of design-patterns that have complex textures. Design-patterns produced by "the dynamical system defined by iterations of discrete Laplacians on the plane lattice" were adopted as stimuli because they were not only complex, but also defined mathematically. In the experiment, 21 graduate and undergraduate students sorted 102 design-patterns into several groups by visual impressions. Those 102 patterns were classified into 12 categories by the cluster analysis. The results showed that the regularity of pattern was a most efficient factor for determining visual impressions of design-pattern, and there were some correspondence between visual impressions and mathematical variables of design-pattern. Especially, the visual impressions were influenced greatly by the neighborhood, and less influenced by steps of iterations.}, subject = {Architektur }, language = {en} } @inproceedings{Faustino, author = {Faustino, Nelson}, title = {FISCHER DECOMPOSITION FOR DIFFERENCE DIRAC OPERATORS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2955}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29551}, pages = {10}, abstract = {We establish the basis of a discrete function theory starting with a Fischer decomposition for difference Dirac operators. Discrete versions of homogeneous polynomials, Euler and Gamma operators are obtained. As a consequence we obtain a Fischer decomposition for the discrete Laplacian. For the sake of simplicity we consider in the first part only Dirac operators which contain only forward or backward finite differences. Of course, these Dirac operators do not factorize the classic discrete Laplacian. Therefore, we will consider a different definition of a difference Dirac operator in the quaternionic case which do factorizes the discrete Laplacian.}, subject = {Architektur }, language = {en} } @inproceedings{SeidelGasserWerner, author = {Seidel, Tilman and Gasser, Ingenuin and Werner, Bodo}, title = {CAR FOLLOWING MODELS FOR PHENOMENONS ON THE HIGHWAY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3018}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30187}, pages = {8}, abstract = {Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.}, subject = {Architektur }, language = {en} } @inproceedings{Shapiro, author = {Shapiro, Michael}, title = {ON HYPERHOLOMORPHIC POLYNOMIALS FOR THE CAUCHY-RIEMANN AND THE DIRAC OPERATORS OF CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3020}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30201}, pages = {1}, abstract = {Clifford Analysis, hyperholomorphic polynomials, Taylor Series.}, subject = {Architektur }, language = {en} } @inproceedings{ErikssonKettunen, author = {Eriksson, Sirkka-Liisa and Kettunen, Jarkko}, title = {HYPERMONOGENIC POLYNOMIALS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2950}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29509}, pages = {22}, abstract = {It is well know that the power function is not monogenic. There are basically two ways to include the power function into the set of solutions: The hypermonogenic functions or holomorphic Cliffordian functions. L. Pernas has found out the dimension of the space of homogenous holomorphic Cliffordian polynomials of degree m, but his approach did not include a basis. It is known that the hypermonogenic functions are included in the space of holomorphic Cliffordian functions. As our main result we show that we can construct a basis for the right module of homogeneous holomorphic Cliffordian polynomials of degree m using hypermonogenic polynomials and their derivatives. To that end we first recall the function spaces of monogenic, hypermonogenic and holomorphic Cliffordian functions and give the results needed in the proof of our main theorem. We list some basic polynomials and their properties for the various function spaces. In particular, we consider recursive formulas, rules of differentiation and properties of linear independency for the polynomials.}, subject = {Architektur }, language = {en} } @inproceedings{DzwigonHempel, author = {Dzwigon, Wieslaw and Hempel, Lorenz}, title = {ZUR SYNCHRONISATION VON LINIEN IM {\"O}PNV}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2944}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29442}, pages = {12}, abstract = {Wir betrachten im {\"O}PNV ({\"O}ffentlichen Personennahverkehr) diejenige Situation, daß zwei Bus- oder Straßenbahnlinien gemeinsame Haltestellen haben. Ziel unserer Untersuchungen ist es, f{\"u}r beide Linien einen solchen Fahrplan zu finden, der f{\"u}r die Fahrg{\"a}ste m{\"o}glichst viel Bequemlichkeit bietet. Die Bedarfsstruktur - die Anzahl von Personen, die die beiden Linien benutzen - setzt dabei gewisse Beschr{\"a}nkungen f{\"u}r die Taktzeiten der beiden Linien. Die verbleibenden Entscheidungsfreiheiten sollen im Sinne der Zielstellung ausgenutzt werden. Im Vortrag wird folgenden Fragen nachgegangen: - nach welchen Kriterien kann man die "Bequemlichkeit" oder die "Synchonisationsg{\"u}te" messen? - wie kann man die einzelnen "Synchronisationsmaße" berechnen ? - wie kann man die verbleibenden Entscheidungsfreiheiten nutzen, um eine m{\"o}glichst gute Synchronisation zu erreichen ? Die Ergebnisse werden dann auf einige Beispiele angewandt und mit den bereitgestellten Methoden L{\"o}sungsvorschl{\"a}ge unterbreitet.}, subject = {Architektur }, language = {de} } @inproceedings{RogożaStachonUbysz, author = {Rogoża, Agnieszka and Stachon, T. and Ubysz, Andrzej}, title = {MODELLING THE PLASTIC HINGE IN THE STATICALLY INDETERMINABLE REINFORCED CONCRETE BAR ELEMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3005}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30050}, pages = {6}, abstract = {The paper presents the example numerical model to calculate the reinforced concrete bar structures. Usually applied methods of structure dimensioning do not include the case of plastic hinges occurrence under the limit load of construction. The model represented by A. Borcz is based on the differential equation of deflection line of the beam and it includes the effects of rearrangement of the internal forces and reological effects. The experimental parameters obtained in earlier investigations describe effects resulting from the rise of plastic hinges in the proposed equation.}, subject = {Architektur }, language = {en} } @inproceedings{EngelkeSchuster, author = {Engelke, Gerald and Schuster, Otmar}, title = {OPENING THE RESERVE OF ECONOMIC EFFICIENCY IN LOGISTICAL AND FACILITY MANAGEMENT SERVICES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3017}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30177}, pages = {8}, abstract = {In many branches companies often lose the visibility of their human and technical resources of their field service. On the one hand the people in the fieldservice are often free like kings on the other hand they do not take part of the daily communication in the central office and suffer under the lacking involvement in the decisions inside the central office. The result is inefficiency. Reproaches in both directions follow. With the radio systems and then mobile phones the ditch began to dry up. But the solutions are far from being productive.}, subject = {Architektur }, language = {en} } @inproceedings{SchererGrinewitschus, author = {Scherer, Klaus and Grinewitschus, Viktor}, title = {INTEGRIERTE SYSTEMBEDIENUNG IN GEB{\"A}UDEN: KOMPLEXE TECHNIK EINFACHER HANDHABEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3013}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30132}, pages = {7}, abstract = {R{\"a}ume und Geb{\"a}ude sind heute wegen der enormen Funktionalit{\"a}t der technischen Geb{\"a}udeausr{\"u}stung (TGA) in Kombination mit der sonstigen Ausstattung und den diversen Anwendungsprozessen und Nutzergruppen ohne innovative Konzepte der integrierten Bedienung kaum noch beherrschbar bzw. optimal nutzbar. Dies gilt sowohl f{\"u}r Wohn- als auch f{\"u}r Zweckimmobilien. Die Geb{\"a}udeleittechnik (GLT) und die Geb{\"a}udeautomation (GA) k{\"o}nnen hier unter sinnvoller Integration der M{\"o}glichkeiten der Mikroelektronik, Multimedia-, Kommunikations- und Informationstechnik erheblich zu nutzbringenden Innovationen beitragen. Die Automobilindustrie hat in den letzten Jahren gezeigt, wie durch einen integralen Systemansatz und durch Einsatz von Elektronik, Kommunikations- und Informationstechnik eine sinnvolle technische Assistenz der Anwender machbar ist. Genannt sei hier das Konzept des Cockpits mit integrierter Funktionsb{\"u}ndelung und der Informationskonzentration am Armaturenbrett. Im Gegensatz zum Automobil ist der Bereich der technischen Geb{\"a}udeausstattung in Wohn- und Nutzimmobilien gekennzeichnet durch eine starke Fragmentierung in unterschiedlichste Gewerke unter Beteiligung vieler oft schlecht koordinierter Akteure. Durch das Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren neuartige Konzepte der Systemintegration heterogener Technik auf der Basis von Middleware-Plattformen und Multimedia-Technologien und -Ger{\"a}ten entwickelt, getestet und in die Anwendung getragen. Einer der ersten Systemanwendungen dieses offenen Infrastrukturkonzepts ist die integrierte Systembedienung mit zum Teil v{\"o}llig neuen Bedienkonzepten und einer starken Bedienungsvereinfachung auch komplexester Technikausr{\"u}stungen in Immobilien. Der Beitrag beschreibt nach einer Analyse der Ausgangslage die technologischen Grundz{\"u}ge der integrierten Systembedienung. Es folgen einige Anwendungsbeispiele und eine zusammenfassende Bewertung mit einem Ausblick auf weiterf{\"u}hrende Aktivit{\"a}ten.}, subject = {Architektur }, language = {de} } @inproceedings{WoszczynaKaminskiMajetal., author = {Woszczyna, Anna and Kaminski, Mieczysław and Maj, Marek and Ubysz, Andrzej}, title = {ANALYSING THE INFLUENCE OF THE REINFORCED CONCRETE CHIMNEY GEOMETRY CHANGES ON THE STRESSES IN THE CHIMNEY SHAFT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3038}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30388}, pages = {7}, abstract = {Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.}, subject = {Architektur }, language = {en} } @inproceedings{Siekierski, author = {Siekierski, Wojciech}, title = {VARIATION OF ROTATIONAL RESTRAINT IN GRID DECK CONNECTION DUE TO CORROSION DAMAGE AND STRENGTHENING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3021}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30217}, pages = {8}, abstract = {The approach to assessment of rotational restraint of stringer-to-crossbeam connection in a deck of 100-year old steel truss bridge is presented. Sensitivity of rotational restraint coefficient of the connection to corrosion damage and strengthening is analyzed. Two criteria of the assessment of the rotational restraint coefficient are applied: static and kinematic one. The former is based on bending moment distribution in the considered member, the latter one - on the member rotation at the given joint. 2D-element model of finite element method is described: webs and flanges are modeled with shell elements, while rivets in the connection - with system of beam and spring elements. The method of rivet modeling is verified by T-stub connection test results published in literature. FEM analyses proved that recorded extent of corrosion damage does not alter the initial rotational restraint of stringer-to-crossbeam connection. Strengthening of stringer midspan influences midspan bending moment and stringer end rotation in a different way. Usually restoring member load bearing capacity means strengthening its critical regions (where the highest stress levels occur). This alters flexural stiffness distribution over member length and influences rotational restraint at its connection to other members. The impact depends on criterion chosen for rotational restraint coefficient assessment.}, subject = {Architektur }, language = {en} } @inproceedings{SchoenbergerHermann, author = {Sch{\"o}nberger, Karsten and Hermann, F.}, title = {COMPUTERGEST{\"U}TZTES PORTFOLIOMANAGEMENT - EIN PRAXISBEISPIEL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3016}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30168}, pages = {10}, abstract = {Die Kommunale Wohnungsgesellschaft mbH Erfurt(KoWo) ist mit ihren rund 20.000 Wohnungen in der Landeshauptstadt das gr{\"o}ßte Wohnungsunternehmen in Th{\"u}ringen. Der Immobilienbestand ist heterogen in seinem technischen Zustand und im Bezug auf die unterschiedlichen Lagen der Objekte. Bedingt durch Leerst{\"a}nde und unterschiedliche Modernisierungsmaßnahmen und -st{\"a}nde unterscheidet sich die Wirtschaftlichkeit verschiedener Objekte deutlich. Ohne eine einheitliche Einwertung des Immobilienbestandes im Bezug auf die Objektattraktivit{\"a}t, die Standortqualit{\"a}t und die Objektwirtschaftlichkeit f{\"a}llt eine langfristige strategische Entwicklung des Immobilienportfolios schwer. {\"U}ber die Schritte der technischen Bestandserfassung, die Einwertung {\"u}ber ein Scorintmodell, die Abbildung in einem Portfoliomodell mit zugeh{\"o}riger Normstrategie bis hin zur Weiterverarbeitung der Daten in der 20-j{\"a}hrigen Instandsetzungsplanung wird praxisnah aufgezeigt, wie die Vorgehensweise bei der Einwertung des Immobilienportfolios ist.}, subject = {Architektur }, language = {de} } @inproceedings{SchererGrinewitschus, author = {Scherer, Klaus and Grinewitschus, Viktor}, title = {AMBIENT INTELLIGENCE IN RAUM UND BAU INNOVATIVE TECHNIKASSISTENZ F{\"U}R FACILITY MANAGEMENT UND ANWENDUNG}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2914}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29140}, pages = {9}, abstract = {Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsf{\"a}higkeit in kleinsten Formaten, mit geringsten Energien und zu g{\"u}nstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Ger{\"a}ten und Systemen ist nunmehr zur Selbstverst{\"a}ndlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir n{\"a}hern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der {\"u}berall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen t{\"a}glichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die gr{\"o}ßeren Computerkomponenten (z.B. PCs, Server) {\"u}ber Datenschnittstellen zu r{\"a}umlich verteilten Netzwerken verkn{\"u}pft (z.B. Internet, Intranet) und mit einer system{\"u}bergreifenden und ad{\"a}quaten Intelligenz (Software) programmiert, so k{\"o}nnen neuartige Funktionalit{\"a}ten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Geb{\"a}uden und R{\"a}umen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Geb{\"a}udephysik, technischer Geb{\"a}udeausr{\"u}stung (TGA) und Geb{\"a}udeautomation (GA) im Wege stehende Gewerketrennung zu {\"u}berwinden. Es entstehen f{\"u}r div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erl{\"a}uterte Beispiele f{\"u}r AmI-L{\"o}sungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notf{\"a}llen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im B{\"u}ro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Geb{\"a}uden. Im Duisburger inHaus-Innovationszentrum f{\"u}r Intelligente Raum- und Geb{\"a}udesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste L{\"o}sungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen M{\"o}glichkeiten f{\"u}r den Transfer dieser neuen Technologie in den Raum- und Geb{\"a}udebereich. Es folgt eine abschließende Zusammenfaßung und eine Einsch{\"a}tzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.}, subject = {Architektur }, language = {de} } @inproceedings{ErlemannHartmann, author = {Erlemann, Kai and Hartmann, Dietrich}, title = {PARALLELIZATION OF A MICROSCOPIC TRAFFIC SIMULATION SYSTEM USING MPIJAVA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2951}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29516}, pages = {8}, abstract = {Traffic simulation is a valuable tool for the design and evaluation of road networks. Over the years, the level of detail to which urban and freeway traffic can be simulated has increased steadily, shifting from a merely qualitative macroscopic perspective to a very detailed microscopic view, where the behavior of individual vehicles is emulated realistically. With the improvement of behavioral models, however, the computational complexity has also steadily increased, as more and more aspects of real-life traffic have to be considered by the simulation environment. Despite the constant increase in computing power of modern personal computers, microscopic simulation stays computationally expensive, limiting the maximum network size than can be simulated on a single-processor computer in reasonable time. Parallelization can distribute the computing load from a single computer system to a cluster of several computing nodes. To this end, the exisiting simulation framework had to be adapted to allow for a distributed approach. As the simulation is ultimately targeted to be executed in real-time, incorporating real traffic data, only a spatial partition of the simulation was considered, meaning the road network has to be partitioned into subnets of comparable complexity, to ensure a homogenous load balancing. The partition process must also ensure, that the division between subnets does only occur in regions, where no strong interaction between the separated road segments occurs (i.e. not in the direct vicinity of junctions). In this paper, we describe a new microscopic reasoning voting strategy, and discuss in how far the increasing computational costs of these more complex behaviors lend themselves to a parallelized approach. We show the parallel architecture employed, the communication between computing units using MPIJava, and the benefits and pitfalls of adapting a single computer application to be used on a multi-node computing cluster.}, subject = {Architektur }, language = {en} } @inproceedings{Muschalla, author = {Muschalla, Dirk}, title = {OPTIMIZATION OF WATER RESOURCES SYSTEMS USING MULTI-OBJECTIVE EVOLUTION STRATEGIES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2995}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29953}, pages = {10}, abstract = {This paper deals with the development of a new multi-objective evolution strategy in combination with an integrated pollution-load and water-quality model. The optimization algorithm combines the advantages of the Non-Dominated Sorting Genetic Algorithm and Self-Adaptive Evolution Strategies. The identification of a good spread of solutions on the pareto-optimum front and the optimization of a large number of decision variables equally demands numerous simulation runs. In addition, statements with regard to the frequency of critical concentrations and peak discharges require continuous long-term simulations. Therefore, a fast operating integrated simulation model is needed providing the required precision of the results. For this purpose, a hydrological deterministic pollution-load model has been coupled with a river water-quality and a rainfall-runoff model. Wastewater treatment plants are simulated in a simplified way. The functionality of the optimization and simulation tool has been validated by analyzing a real catchment area including sewer system, WWTP, water body and natural river basin. For the optimization/rehabilitation of the urban drainage system, both innovative and approved measures have been examined and used as decision variables. As objective functions, investment costs and river water quality criteria have been used.}, subject = {Architektur }, language = {en} } @inproceedings{EblingScheuermann, author = {Ebling, Julia and Scheuermann, G.}, title = {TEMPLATE MATCHING ON VECTOR FIELDS USING CLIFFORD ALGEBRA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2946}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29464}, pages = {25}, abstract = {Due to the amount of flow simulation and measurement data, automatic detection, classification and visualization of features is necessary for an inspection. Therefore, many automated feature detection methods have been developed in recent years. However, only one feature class is visualized afterwards in most cases, and many algorithms have problems in the presence of noise or superposition effects. In contrast, image processing and computer vision have robust methods for feature extraction and computation of derivatives of scalar fields. Furthermore, interpolation and other filter can be analyzed in detail. An application of these methods to vector fields would provide a solid theoretical basis for feature extraction. The authors suggest Clifford algebra as a mathematical framework for this task. Clifford algebra provides a unified notation for scalars and vectors as well as a multiplication of all basis elements. The Clifford product of two vectors provides the complete geometric information of the relative positions of these vectors. Integration of this product results in Clifford correlation and convolution which can be used for template matching of vector fields. For frequency analysis of vector fields and the behavior of vector-valued filters, a Clifford Fourier transform has been derived for 2D and 3D. Convolution and other theorems have been proved, and fast algorithms for the computation of the Clifford Fourier transform exist. Therefore the computation of Clifford convolution can be accelerated by computing it in Clifford Fourier domain. Clifford convolution and Fourier transform can be used for a thorough analysis and subsequent visualization of flow fields.}, subject = {Architektur }, language = {en} } @inproceedings{EbertLenzen, author = {Ebert, Carsten and Lenzen, Armin}, title = {OUTPUT-ONLY ANALYSIS FOR EXPERIMENTAL DAMAGE DETECTION OF A TIED-ARCH BRIDGE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2945}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29452}, pages = {13}, abstract = {In civil engineering it is very difficult and often expensive to excite constructions such as bridges and buildings with an impulse hammer or shaker. This problem can be avoided with the output-only method as special feature of stochastic system identification. The permanently existing ambient noise (e.g. wind, traffic, waves) is sufficient to excite the structures in their operational conditions. The output-only method is able to estimate the observable part of a state-space-model which contains the dynamic characteristics of the measured mechanical system. Because of the assumption that the ambient excitation is white there is no requirement to measure the input. Another advantage of the output-only method is the possibility to get high detailed models by a special method, called polyreference setup. To pretend the availability of a much larger set of sensors the data from varying sensor locations will be collected. Several successive data sets are recorded with sensors at different locations (moving sensors) and fixed locations (reference sensors). The covariance functions of the reference sensors are bases to normalize the moving sensors. The result of the following subspace-based system identification is a high detailed black-box-model that contains the weighting function including the well-known dynamic parameters eigenfrequencies and mode shapes of the mechanical system. Emphasis of this lecture is the presentation of an extensive damage detection experiment. A 53-year old prestressed concrete tied-arch-bridge in H{\"u}nxe (Germany) was deconstructed in 2005. Preliminary numerous vibration measurements were accomplished. The first experiment for system modification was an additional support near the bridge bearing of one main girder. During a further experiment one hanger from one tied arch was cut through as an induced damage. Some first outcomes of the described experiments will be presented.}, subject = {Architektur }, language = {en} } @inproceedings{SampaioHenriquesStuderetal., author = {Sampaio, Alcinia Zita and Henriques, Pedro and Studer, P. and Luizi, Rui}, title = {VIRTUAL REALITY TECHNOLOGY TO REPRESENT CONSTRUCTION ACTIVITIES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30090}, pages = {9}, abstract = {The use of virtual reality techniques in the development of educational applications brings new perspectives to the teaching of subjects related to the field of civil construction in Civil Engineering domain. In order to obtain models, which would be able to visually simulate the construction process of two types of construction work, the research turned to the techniques of geometric modelling and virtual reality. The applications developed for this purpose are concerned with the construction of a cavity wall and a bridge. These models make it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. They also support the study of the type and method of operation of the equipment necessary for these construction procedures. These models have been used to distinct advantage as educational aids in first-degree courses in Civil Engineering. Normally, three-dimensional geometric models, which are used to present architectural and engineering works, show only their final form, not allowing the observation of their physical evolution. The visual simulation of the construction process needs to be able to produce changes to the geometry of the project dynamically. In the present study, two engineering construction work models were created, from which it was possible to obtain three-dimensional models corresponding to different states of their form, simulating distinct stages in their construction. Virtual reality technology was applied to the 3D models. Virtual reality capacities allow the interactive real-time viewing of 3D building models and facilitate the process of visualizing, evaluating and communicating.}, subject = {Architektur }, language = {en} } @inproceedings{BrackxDeSchepperSommen, author = {Brackx, Fred and De Schepper, Nele and Sommen, Frank}, title = {Clifford-Hermite and Two-Dimensional Clifford-Gabor Filters For Early Vision}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2930}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29303}, pages = {22}, abstract = {Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.}, subject = {Architektur }, language = {en} } @inproceedings{BrackxDeKnockDeSchepper, author = {Brackx, Fred and De Knock, B. and De Schepper, Hennie}, title = {A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2929}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29297}, pages = {15}, abstract = {In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.}, subject = {Architektur }, language = {en} } @inproceedings{BrackxDeSchepperDeSchepperetal., author = {Brackx, Fred and De Schepper, Hennie and De Schepper, Nele and Sommen, Frank}, title = {HERMITIAN CLIFFORD-HERMITE WAVELETS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2931}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29313}, pages = {13}, abstract = {The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.}, subject = {Architektur }, language = {en} } @inproceedings{WittwerBecker, author = {Wittwer, Christof and Becker, Rainer}, title = {MODELLBASIERTE ERTRAGSKONTROLLE F{\"U}R PV ANLAGEN IN VERNETZTEN GEB{\"A}UDEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3036}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30363}, pages = {5}, abstract = {Subject of the paper is the realisation of a model based efficiency control system for PV generators using a simulation model. A standard 2-diodes model of PV generator is base of the ColSim model, which is implemented in ANSI C code for flexible code exporting. The algorithm is based on discretisized U-I characteristics, which allows the calculation of string topologies witch parallel and serial PV cells and modules. Shadowing effects can be modelled down to cell configuration using polar horizon definitions. The simulation model was ported to a real time environment, to calculate the efficiency of a PV system. Embedded System technology allows the networked operation and the integration of standard I/O devices. Futher work focus on the adaption of shadowing routine, which will be adapted to get the environment conditions from the real operation.}, subject = {Architektur }, language = {de} } @inproceedings{Geyer, author = {Geyer, Philipp}, title = {MODELS FOR MULTIDISCIPLINARY DESIGN OPTIMIZATION: AN EXEMPLARY OFFICE BUILDING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2957}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29574}, pages = {10}, abstract = {The mathematical and technical foundations of optimization have been developed to a large extent. In the design of buildings, however, optimization is rarely applied because of insufficient adaptation of this method to the needs of building design. The use of design optimization requires the consideration of all relevant objectives in an interactive and multidisciplinary process. Disciplines such as structural, light, and thermal engineering, architecture, and economics impose various objectives on the design. A good solution calls for a compromise between these often contradictory objectives. This presentation outlines a method for the application of Multidisciplinary Design Optimization (MDO) as a tool for the designing of buildings. An optimization model is established considering the fact that in building design the non-numerical aspects are of major importance than in other engineering disciplines. A component-based decomposition enables the designer to manage the non-numerical aspects in an interactive design optimization process. A fa{\c{c}}ade example demonstrates a way how the different disciplines interact and how the components integrate the disciplines in one optimization model. In this grid-based fa{\c{c}}ade example, the materials switch between a discrete number of materials and construction types. For light and thermal engineering, architecture, and economics, analysis functions calculate the performance; utility functions serve as an important means for the evaluation since not every increase or decrease of a physical value improves the design. For experimental purposes, a genetic algorithm applied to the exemplary model demonstrates the use of optimization in this design case. A component-based representation first serves to manage non-numerical characteristics such as aesthetics. Furthermore, it complies with usual fabrication methods in building design and with object-oriented data handling in CAD. Therefore, components provide an important basis for an interactive MDO process in building design.}, subject = {Architektur }, language = {en} } @inproceedings{HildebrandWudtkeWerner, author = {Hildebrand, J{\"o}rg and Wudtke, Idna and Werner, Frank}, title = {M{\"O}GLICHKEITEN DER MATHEMATISCHEN BESCHREIBUNG VON PHASENUMWANDLUNGEN IM STAHL BEI SCHWEIß- UND WIG-NACHBEHANDLUNGSPROZESSEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2968}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29684}, pages = {13}, abstract = {In the final decades many scientists were occupied intensively with the change of materials during a process and their mathematical descriptions. The extensive and extensive analyses were supported by the advanced computer science. A mathematical description of the phase transformation is a condition for a realistic FE simulation of the state of microstructure. It is possible to simulate the temperature and stress field also in complex construction based on the state of microstructure. In the last years a great number of mathematical models were expanded to describe the transformation between different phases. For the development of the models for transformation kinetics it is practical to subdivide into isothermal and non-isothermal processes according to the thermal conditions. Some models for the description of the transformation with non-isothermal processes represent extensions for isothermal of processes. A part of parameters for the describing equations can be derived from the time-temperature-transformation diagrams in the literature. Furthermore the two possibilities of transformation are considered by different models - diffusion controlled and not diffusion controlled. The material-specific characteristics can be simulated during the transformation for each individual phase in a realistic FE analyses. Also new materials can be simulated after a modification of the parameters in the describing equations for the phase transformation. The effects in the temperature and stress field are a substantial reason for the investigation of the phase transformation during the welding and TIG-dressing processes.}, subject = {Architektur }, language = {de} } @inproceedings{ChangChang, author = {Chang, Wei-Tsang and Chang, Teng-Wen}, title = {TIME-BASED FORM TRANSFORMATION WITH FOLDING SPACE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2937}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29371}, pages = {10}, abstract = {Design activity could be treated as state transition computationally. In stepwise processing, in-between form-states are not easily observed. However, in this research time-based concept is introduced and applied in order to bridge the gap. In architecture, folding is one method of form manipulation and architects also want to search for alternatives by this operation. Besides, folding operation has to be defined and parameterized before time factor is involved as a variable of folding. As a result, time-based transformation provides sequential form states and redirects design activity.}, subject = {Architektur }, language = {en} } @inproceedings{Kisil, author = {Kisil, Vladimir}, title = {FILLMORE-SPRINGER-CNOPS CONSTRUCTION IMPLEMENTED IN GINAC}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2974}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29744}, pages = {103}, abstract = {This is an implementation of the Fillmore-Springer-Cnops construction (FSCc) based on the Clifford algebra capacities of the GiNaC computer algebra system. FSCc linearises the linear-fraction action of the Mobius group. This turns to be very useful in several theoretical and applied fields including engineering. The core of this realisation of FSCc is done for an arbitrary dimension, while a subclass for two dimensional cycles add some 2D-specific routines including a visualisation to PostScript files through the MetaPost or Asymptote software. This library is a backbone of many result published in, which serve as illustrations of its usage. It can be ported (with various level of required changes) to other CAS with Clifford algebras capabilities.}, subject = {Architektur }, language = {en} } @inproceedings{RichterDonath, author = {Richter, Katharina and Donath, Dirk}, title = {AUGMENTING DESIGNERS MEMORY - REVISAL OF THE CASE-BASED REASONING PARADIGM IN ARCHITECTURAL EDUCATION AND DESIGN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3004}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30047}, pages = {5}, abstract = {This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR.}, subject = {Architektur }, language = {en} } @inproceedings{Krasnov, author = {Krasnov, Yakov}, title = {ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2982}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29822}, pages = {16}, abstract = {Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.}, subject = {Architektur }, language = {en} } @inproceedings{LehnerHartmann, author = {Lehner, Karlheinz and Hartmann, Dietrich}, title = {USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2984}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29844}, pages = {10}, abstract = {Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given.}, subject = {Architektur }, language = {en} } @inproceedings{LourensvanRooyen, author = {Lourens, Eliz-Mari and van Rooyen, G.C.}, title = {Automating Preliminary Column Force Calculations In Multy-Storey Buildings}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2986}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29864}, pages = {10}, abstract = {In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given.}, subject = {Architektur }, language = {en} } @inproceedings{KoenigLang, author = {K{\"o}nig, Markus and Lang, H.}, title = {ANWENDUNG DES CASE-BASED REASONING BEI DER ERMITTLUNG VON VARIANTEN F{\"u}R DEN OBERBAU VON VERKEHRSFL{\"A}CHEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2980}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29808}, pages = {9}, abstract = {F{\"u}r die Ausf{\"u}hrung des Oberbaus von Verkehrsfl{\"a}chen existiert in Abh{\"a}ngigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei {\"a}hnlichen Voraussetzungen h{\"a}ufig gleichartige Ausf{\"u}hrungsvarianten gew{\"a}hlt. Um eine m{\"o}gliche L{\"o}sungsvariante f{\"u}r den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte ber{\"u}cksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universit{\"a}t Weimar wurde die Anwendung des Case-Based Reasoning f{\"u}r die Auswahl von Ausf{\"u}hrungsvarianten f{\"u}r den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von {\"a}hnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt.}, subject = {Architektur }, language = {de} } @inproceedings{KoenigTauscher, author = {K{\"o}nig, Markus and Tauscher, Eike}, title = {BERECHNUNG VON BAUABL{\"A}UFEN MIT VERSCHIEDENEN AUSF{\"U}HRUNGSVARIANTEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2981}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29816}, pages = {11}, abstract = {Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abh{\"a}ngigkeiten. Basierend auf diesen projektspezifischen Abh{\"a}ngigkeiten wird gew{\"o}hnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabl{\"a}ufe um ein Projekt zu realisieren. Welche dieser Ausf{\"u}hrungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls {\"A};nderungen oder St{\"o}rungen w{\"a}hrend des Bauablaufs auftreten, m{\"u}ssen die davon betroffenen Aufgaben und Abl{\"a}ufe per Hand modifiziert und alternative Aufgaben sowie Abl{\"a}ufe stattdessen ausgef{\"u}hrt werden. Diese Vorgehensweise ist oft sehr aufw{\"a}ndig und teuer. Aktuelle Forschungsans{\"a}tze besch{\"a}ftigen sich mit der automatischen Generierung von Bauabl{\"a}ufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabl{\"a}ufe mit Ausf{\"u}hrungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu k{\"o}nnen. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt.}, subject = {Architektur }, language = {de} } @inproceedings{Knyziak, author = {Knyziak, Piotr}, title = {ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2979}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29792}, pages = {9}, abstract = {This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.}, subject = {Architektur }, language = {en} } @inproceedings{Kravchenko, author = {Kravchenko, Vladislav}, title = {NEW APPLICATIONS OF PSEUDOANALYTIC FUNCTION THEORY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2983}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29835}, pages = {3}, abstract = {We show a close relation between the Schr{\"o}dinger equation and the conductivity equation to a Vekua equation of a special form. Under quite general conditions we propose an algorithm for explicit construction of pseudoanalytic positive formal powers for the Vekua equation that as a consequence gives us a complete system of solutions for the Schr{\"o}dinger and the conductivity equations. Besides the construction of complete systems of exact solutions for the above mentioned second order equations and the Dirac equation, we discuss some other applications of pseudoanalytic function theory.}, subject = {Architektur }, language = {en} } @inproceedings{EygelaarvanRooyen, author = {Eygelaar, Anton and van Rooyen, G.C.}, title = {ENGINEERING PROCESS MODEL SPECIFICATION AND RESOURCE LEVELING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2952}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29529}, pages = {18}, abstract = {The use of process models in the analysis, optimization and simulation of processes has proven to be extremely beneficial in the instances where they could be applied appropriately. However, the Architecture/Engineering/Construction (AEC) industries present unique challenges that complicate the modeling of their processes. A simple Engineering process model, based on the specification of Tasks, Datasets, Persons and Tools, and certain relations between them, have been developed, and its advantages over conventional techniques have been illustrated. Graph theory is used as the mathematical foundation mapping Tasks, Datasets, Persons and Tools to vertices and the relations between them to edges forming a directed graph. The acceptance of process modeling in AEC industries not only depends on the results it can provide, but the ease at which these results can be attained. Specifying a complex AEC process model is a dynamic exercise that is characterized by many modifications over the process model's lifespan. This article looks at reducing specification complexity, reducing the probability for erroneous input and allowing consistent model modification. Furthermore, the problem of resource leveling is discussed. Engineering projects are often executed with limited resources and determining the impact of such restrictions on the sequence of Tasks is important. Resource Leveling concerns itself with these restrictions caused by limited resources. This article looks at using Task shifting strategies to find a near-optimal sequence of Tasks that guarantees consistent Dataset evolution while resolving resource restrictions.}, subject = {Architektur }, language = {en} } @inproceedings{Klauer, author = {Klauer, Thomas}, title = {MOBILE FACILITY MANAGEMENT ZUR INSPEKTION UND INSTANDHALTUNG VON INGENIEURBAUWERKEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2975}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29759}, pages = {10}, abstract = {In diesem Beitrag wird eine mobile Software-Komponente zur Vor-Ort-Unterst{\"u}tzung von Bauwerkspr{\"u}fungen gem{\"a}ß DIN 1076 „Ingenieurbauwerke im Zuge von Strassen und Wegen, {\"U}berwachung und Pr{\"u}fung" vorgestellt, welche sich im praktischen Einsatz bei der Hochbahn AG Hamburg befindet. Mit Hilfe dieses Werkzeugs kann die Aktivit{\"a}t am Bauwerk in den gesamten softwaregest{\"u}tzten Gesch{\"a}ftsprozess der auwerksinstandhaltung integriert und somit die Bearbeitungszeit einer Bauwerkspr{\"u}fung von der Vorbereitung bis zur Pr{\"u}fbericht-Erstellung reduziert werden. Die Technologie des Mobile Computing wird unter Ber{\"u}cksichtigung spezieller fachlicher Randbedingungen, wie z.B. dem Einsatzort unter freiem Himmel, erl{\"a}utert und es werden Methoden zur effizienten Datenerfassung mit Stift und Sprache vorgestellt und bewertet. Ferner wird die Einschr{\"a}nkung der Hardware durch die geringere Gr{\"o}ße der Endger{\"a}te, die sich durch die Bedingung der Mobilit{\"a}t ergibt, untersucht.}, subject = {Architektur }, language = {de} } @inproceedings{BultheelJansenMaesetal., author = {Bultheel, Adhemar and Jansen, M. and Maes, J. and Van Aerschot, W. and Vanraes, E.}, title = {SUBDIVIDE AND CONQUER RESOLUTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2909}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29091}, pages = {47}, abstract = {This contribution will be freewheeling in the domain of signal, image and surface processing and touch briefly upon some topics that have been close to the heart of people in our research group. A lot of the research of the last 20 years in this domain that has been carried out world wide is dealing with multiresolution. Multiresolution allows to represent a function (in the broadest sense) at different levels of detail. This was not only applied in signals and images but also when solving all kinds of complex numerical problems. Since wavelets came into play in the 1980's, this idea was applied and generalized by many researchers. Therefore we use this as the central idea throughout this text. Wavelets, subdivision and hierarchical bases are the appropriate tools to obtain these multiresolution effects. We shall introduce some of the concepts in a rather informal way and show that the same concepts will work in one, two and three dimensions. The applications in the three cases are however quite different, and thus one wants to achieve very different goals when dealing with signals, images or surfaces. Because completeness in our treatment is impossible, we have chosen to describe two case studies after introducing some concepts in signal processing. These case studies are still the subject of current research. The first one attempts to solve a problem in image processing: how to approximate an edge in an image efficiently by subdivision. The method is based on normal offsets. The second case is the use of Powell-Sabin splines to give a smooth multiresolution representation of a surface. In this context we also illustrate the general method of construction of a spline wavelet basis using a lifting scheme.}, subject = {Architektur }, language = {en} } @inproceedings{KlawitterOstrowski, author = {Klawitter, Arne and Ostrowski, M.}, title = {INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2976}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29767}, pages = {12}, abstract = {A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes.}, subject = {Architektur }, language = {en} } @inproceedings{BeranDlask, author = {Beran, V{\´a}clav and Dlask, Petr}, title = {CONSTRUCTION SPEED AND CASH FLOW OPTIMISATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2926}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29269}, pages = {10}, abstract = {Practical examples show that the improvement in cost flow and total amount of money spend in construction and further use may be cut significantly. The calculation is based on spreadsheets calculation, very easy to develop on most PC´s now a days. Construction works, are a field where the evaluation of Cash Flow can be and should be applied. Decisions about cash flow in construction are decisions with long-term impact and long-term memory. Mistakes from the distant past have a massive impact on situations in the present and into the far economic future of economic activities. Two approaches exist. The Just-in-Time (JIT) approach and life cycle costs (LCC) approach. The calculation example shows the dynamic results for the production speed in opposition to stable flow of production in duration of activities. More sophisticated rescheduling in optimal solution might bring in return extra profit. In the technologies and organizational processes for industrial buildings, railways and road reconstruction, public utilities and housing developments there are assembly procedures that are very appropriate for the given purpose, complicated research-, development-, innovation-projects are all very good aspects of these kinds of applications. The investors of large investments and all public invested money may be spent more efficiently if an optimisation speed-strategy can be calculated.}, subject = {Architektur }, language = {en} } @inproceedings{GoebelHildebrandWerner, author = {G{\"o}bel, Michael and Hildebrand, J{\"o}rg and Werner, Frank}, title = {NUMERISCHES MODELL F{\"U}R DIE SIMULATION EINER LASERSTRAHLSCHWEIßUNG VON QUARZGLAS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2958}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29589}, pages = {14}, abstract = {Ausgehend von den fundierten Erfahrungen, die f{\"u}r das Schweißen von verschiedensten Metallen vorliegen, wird an der Professur Stahlbau der Bauhaus-Universit{\"a}t Weimar ein neuartiges Verfahren zum CO2-Laserstrahlschweißen von Quarzglas numerisch untersucht. Dabei kommt die kommerzielle FE-Software SYSWELD® zum Einsatz. Die erforderlichen Versuche werden in Zusammenarbeit mit dem Institut f{\"u}r F{\"u}getechnik und Werkstoffpr{\"u}fung GmbH aus Jena realisiert. Die numerische Analyse wird eingesetzt, um geeignete Prozessparameter zu bestimmen und deren Auswirkungen auf die transienten thermischen und mechanischen Vorg{\"a}nge, die w{\"a}hrend des Schweißvorgangs ablaufen abzubilden. Um die aus der Simulation erhaltenen Aussagen zu {\"u}berpr{\"u}fen, ist es erforderlich, das Berechnungsmodell mittels Daten aus Versuchsschweißungen zu kalibrieren. Dabei sind die verwendeten Materialmodelle sowie die der Simulation zugrunde gelegten Materialkennwerte zu validieren. Es stehen verschiedene rheologische Berechnungsmodelle zur Auswahl, die die viskosen Materialeigenschaften des Glases abbilden. Dabei werden die drei mechanischen Grundelemente, die HOOKEsche Feder, der NEWTONsche D{\"a}mpfungszylinder und das ST.-VENANT-Element miteinander kombiniert. Die M{\"o}glichkeit, thermische und mechanische Vorg{\"a}nge innerhalb des Glases w{\"a}hrend des Schweißvorgangs und nach vollst{\"a}ndiger Abk{\"u}hlung, vorhersagen zu k{\"o}nnen, gestattet es den Schweißvorgang {\"u}ber eine Optimierung der Verfahrensparameter gezielt dahingehend zu beeinflussen, die Wirtschaftlichkeit des Schweißverfahrens zu verbessern, und ein zuverl{\"a}ssiges Schweißergebnis zu erhalten. Dabei k{\"o}nnen auch nur unter hohem experimentellen Aufwand durchf{\"u}hrbare Versuche simuliert werden, um eine Vorhersage zu treffen, ob es zweckm{\"a}ßig ist, den Versuch auch in der Praxis zu fahren. Dies f{\"u}hrt zu einer Reduzierung des experimentellen Aufwandes und damit zu einer Verk{\"u}rzung des Entwicklungszeitraumes f{\"u}r das angestrebte Verfahren.}, subject = {Architektur }, language = {de} } @inproceedings{ZangSommer, author = {Zang, Di and Sommer, G.}, title = {ALGEBRAICALLY EXTENDED 2D IMAGE REPRESENTATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3039}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30396}, pages = {10}, abstract = {We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.}, subject = {Architektur }, language = {en} } @inproceedings{BauriedelDonathKoenig, author = {Bauriedel, Christian and Donath, Dirk and K{\"o}nig, Reinhard}, title = {COMPUTER-SUPPORTED SIMULATIONS FOR URBAN PLANNING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2923}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29235}, pages = {10}, abstract = {The idea about a simulation program to support urban planning is explained: Four different, clearly defined developing paths can be calculated for the rebuilding of a shrinking town. Aided by self-organization principles, a complex system can be created. The dynamics based on the action patterns of single actors, whose behaviour is cyclically depends on the generated structure. Global influences, which control the development, can be divided at a spatial, socioeconomic, and organizational-juridical level. The simulation model should offer conclusions on new planning strategies, especially in the context of the creation process of rebuilding measures. An example of a transportation system is shown by means of prototypes for the visualisation of the dynamic development process.}, subject = {Architektur }, language = {en} } @inproceedings{Wittenberg, author = {Wittenberg, Reinhold}, title = {AUFBAU EINES MANAGEMENT-INFORMATIONS-SYSTEMS (M-I-S) UND BAUSTELLEN-CONTROLLINGS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3035}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30356}, pages = {7}, abstract = {Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gr{\"u}nde hierf{\"u}r sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings fr{\"u}hzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation st{\"a}ndig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete m{\"o}glich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende erm{\"o}glicht, dass gravierende Ver{\"a}nderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management fr{\"u}hzeitig (im Sinne eines Fr{\"u}hwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelm{\"a}ßig gepr{\"u}ft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren {\"u}berpr{\"u}ft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht verg{\"u}tet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verf{\"u}gung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.}, subject = {Architektur }, language = {de} } @inproceedings{MelnikovSemenov, author = {Melnikov, B. E. and Semenov, Artem}, title = {MULTILEVEL COMPUTATION IN CIVIL ENGINEERING BASED ON MULTIMODEL ELASTO-PLASTIC ANALYSIS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2991}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29911}, pages = {11}, abstract = {Requires for reliability and durability of structures and their elements with simultaneous material economy have stimulated improvement of constitutive equations for description of elasto-plastic deformation processes. This has led to the development of phenomenological modelling of complex phenomena of irreversible deformation including history-dependent and rate-dependent effects. During the last several decades many works have been devoted to the development of elasto-plastic models, in order to better predict the material behavior under combined variable thermo-mechanical loading. The increase of accuracy of stress analysis and safety factors for complex structures with the help of modern finite-element packages (ABAQUS, ANSYS, COSMOS, LS-DYNA, MSC.MARC, MSC.NASTRAN, PERMAS and other) can be provided only by use of complex and special variants of plasticity theories, which are adequate for the considered loading conditions and based on authentic information about properties of materials. The areas of application of the various theories (models) are as a rule unknown to the users of finite-element packages at the existing variety loading condition sin machine-building designs. At the moment a universal theory of inelasticity is absent and even the most accomplished theories can not guarantee adequate description of deformation processes for arbitrary structure under wide range of loading programs. The classifier of materials, loading conditions, effects (phenomena) and list of basic experiments are developed by the authors. Use of these classifiers for an establishment of hierarchy of models is a first step for introduction of the multimodel analysis into computational practice. The set of the classic and modern inelasticity theories is considered, so that they are applicable for stress analysis of structures under complex loading programs. Among them there are plastic flow theories with linear and nonlinear isotropic and kinematic hardening, multisurface theories, endochronic theory, holonomic theory, rheologic models, theory of elasto-plastic processes, slip theory, physical theories (single crystal and polycrystalline models) and others. The classification of materials provides rearranging by a degree of homogeneous, chemical composition, level of strength and plasticity, behavior under cyclic loading, anisotropy of properties at initial condition, anisotropy of properties during deformation process, structural stability. The classification of loading conditions takes into consideration proportional and non-proportional loading, temperature range, combination of cyclic and monotonous loading, one-axial, two-axial and complex stress state, curvature of strain path, presence of stress concentrators and level of strain gradient. A unified general form of constitutive equations is presented for all used material models based upon the concept of internal state variables. The wide range of mentioned above inelastic material models has been implemented into finite element program PANTOCRATOR developed by authors (see for details www.pantocrator.narod.ru). Application possibility of different material models is considered both for material element and for complex structures subjected to complex non-proportional loading.}, subject = {Architektur }, language = {en} } @inproceedings{WenderWillenbacherHuebler, author = {Wender, K. and Willenbacher, Heiko and H{\"u}bler, Reinhard}, title = {BENUTZERAD{\"A}QUATE NAVIGATIONS- UND RECHERCHETECHNOLOGIEN F{\"U}R VERTEILTE DYNAMISCHE DIGITALE BAUWERKSMODELLE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3034}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30349}, pages = {13}, abstract = {Hinsichtlich der Integration einzelner Bauwerkslebensphasen und der verschiedenen Beteiligten, insbesondere innerhalb von Bauplanungs- und Revitalisierungsprozessen, bestehen aktuell entscheidende Defizite. Die generelle Zielstellung der in diesem Beitrag vorgestellten Forschungsarbeiten besteht in der Unterst{\"u}tzung und Verbesserung der Integration durch die disziplin- und lebensphasen{\"u}bergreifende Bereitstellung s{\"a}mtlicher bauwerksbezogener Informationen. Dies erfordert einerseits geeignete Ans{\"a}tze zur Modellierung und Integration der vielf{\"a}ltigen disziplinspezifischen Daten, andererseits geeignete L{\"o}sungen, die einen globalen Zugriff, Navigation und Recherche im Gesamtdatenbestand erm{\"o}glichen. Die Modellierung und Verwaltung bauwerksbezogener Daten ist seit l{\"a}ngerem Gegenstand diverser Forschungsarbeiten. Im Rahmen des SFB 524 wurde ein eigener Ansatz basierend auf einem laufzeitdynamischen Partialmodellverbund entwickelt. Dieser wird in den wesentlichen Grundz{\"u}gen anderen Ans{\"a}tzen gegen{\"u}bergestellt. Den Schwerpunkt dieses Beitrags bildet jedoch die Entwicklung einer geeigneten flexiblen Navigations- und Rechercheschicht zu Realisierung projektglobaler Informationsrecherche. Aus der Sicht der Modellierung und Datenverwaltung wie auch aus der Sicht der Informationsrecherche und Informationspr{\"a}sentation in Planungsprozessen ergeben sich verschiedene Anforderungen an derartige Recherchewerkzeuge, wobei der wesentlichste Grundsatz maximale Flexibilit{\"a}t hinsichtlich verf{\"u}gbarer Darstellungstechniken und deren freie Kombination mit Techniken formaler Suchanfragen ist. Das entwickelte Systemkonzept basiert auf einem Framework, welches verschiedene Grundtypen von Recherchemodulen und deren Interaktionsprinzipien vorgibt. Einzelne Recherchemodule werden als Auspr{\"a}gungen dieser Modultypen realisiert und k{\"o}nnen je nach Bedarf laufzeitdynamisch in die Navigationsschicht integriert werden. Die technische Realisierung des Systems erfolgt im Umfeld vorhandener Prototypen aus vorangegangenen Forschungsaktivit{\"a}ten. Dieses technische Umfeld gibt verschiedene Rahmenbedingungen vor, welche im Vorfeld prototypischer Implementierungen verschiedene Adaptionen des generellen Systemkonzepts notwendig machen. Der vorliegende Beitrag stellt den aktuellen Entwicklungsstand der Systeml{\"o}sung aus konzeptioneller und technischer Sicht sowie erste prototypische Realisierungen von Recherchemodulen vor.}, subject = {Architektur }, language = {de} } @inproceedings{GalffyBaitschWellmannJelicetal., author = {Galffy, Mozes and Baitsch, Matthias and Wellmann Jelic, Andres and Hartmann, Dietrich}, title = {LIFETIME-ORIENTED OPTIMIZATION OF BRIDGE TIE RODS EXPOSED TO VORTEX-INDUCED ACROSS-WIND VIBRATIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2956}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29561}, pages = {12}, abstract = {In recent years, damages in welded connections plates of vertical tie rods of several arched steel bridges have been reported. These damages are due to fatigue caused by wind-induced vibrations. In the present study, such phenomena are examined, and the corresponding lifetime of a reference bridge in M{\"u}nster-Hiltrup, Germany, is estimated, based on the actual shape of the connection plate. Also, the results obtained are compared to the expected lifetime of a connection plate, whose geometry has been optimized separately. The structural optimization, focussing on the shape of the cut at the hanger ends, has been carried out using evolution strategies. The oscillation amplitudes have been computed by means of the Newmark-Wilson time-step method, using an appropriate load model, which has been validated by on-site experiments on the selected reference bridge. Corresponding stress-amplitudes are evaluated by multiplying the oscillation amplitudes with a stress concentration factor. This factor has been computed on the basis of a finite element model of the system "hanger-welding-connection plate", applying solid elements, according to the notch stress approach. The damage estimation takes into account the stochastics of the exciting wind process, as well as the stochastics of the material parameters (fatigue strength) given in terms of Woehler-curves. The shape optimization results in a substantial increase of the estimated hanger lifetime. The comparison of the lifetimes of the bulk plate and of the welding revealed that, in the optimized structure, the welding, being the most sensitive part in the original structure, shows much more resistance against potential damages than the bulk material.}, subject = {Architektur }, language = {en} } @inproceedings{SpiekermannDonath, author = {Spiekermann, Christoph and Donath, Dirk}, title = {DIGITAL SUPPORT OF MATERIAL- AND PRODUCT SELECTION IN THE ARCHITECTURAL DESIGN- AND PLANNING PROCESS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3023}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30235}, pages = {10}, abstract = {Architecture is predominantly perceived over the surfaces limiting the space. The used surface materials thereby should support the design intention and have to fulfil various technical and economical requirements. If the architect wants to select the "right" or the "best" material he has to play with very different and sometimes contradicting criteria and must weight these individually for the special purpose. This selection process is supported only insufficiently by today's digital systems. If it would be possible to illustrate all the various parameters by numerical values, the method of multidimensional scaling will offer a solution for architects to find the material which is best fitting on basis of his individual weighting of criteria. By displaying the result of the architect's multidimensional query in a spatial arrangement multidimensional scaling can support an interactive selection process with additional feedback over the applied search strategy.}, subject = {Architektur }, language = {en} } @inproceedings{MusialUbyszUlatowski, author = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr}, title = {METHOD OF CALCULATION OF INTERNAL FORCES REDISTRIBUTION AND DISLOCATIONS IN REINFORCED CONCRETE BEAMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2996}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29965}, pages = {8}, abstract = {The paper is a proposal of calculation of internal forces and dislocations in the reinforced concrete beams before and after cracking. For the ideally elastic bars transfer matrix proposed by Rakowski was applied. The effects associated with cracking were introduced by means of the Borcz's theory in the spectrally way. Numerical example was shown. The presented attitude also enables to calculate dynamic problems and those connected with the stability of the compressed and bending cracked beams and columns.}, subject = {Architektur }, language = {en} } @inproceedings{Volkova, author = {Volkova, Viktorija}, title = {APPLICTION OF THE PHASE TRAJECTORIES MAPPING TO IDENTIFICATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3032}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30329}, pages = {7}, abstract = {The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration - displacement". Unlike the trajectories mapping in a plane "velocity - displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.}, subject = {Architektur }, language = {en} } @inproceedings{SzolomickiBaranski, author = {Szolomicki, Jerzy Pawel and Baranski, Jacek}, title = {COMPUTATIONAL SIMULATIONS FOR HOMOGENIZATION OF MASONRY STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3026}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30265}, pages = {7}, abstract = {In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.}, subject = {Architektur }, language = {en} } @inproceedings{Traversoni, author = {Traversoni, Leonardo}, title = {MOVEMENT DETECTION AND RECOGNITION WITH QUATERNION WAVELETS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3027}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30274}, pages = {8}, abstract = {We show how a Morlet type quaternion wavelet may be tuned to a pair of stereoscopic {\O}lms in order to detect moving objects and calculate its velocity shape volume and other characteristics. We show some practical examples of simple objects taken with normal pocket avi cameras.}, subject = {Architektur }, language = {en} } @inproceedings{SzarataStarostina, author = {Szarata, Andrzej and Starostina, T.}, title = {MAMDANI'S FUZZY INFERENCE SYSTEM AS A TOOL FOR MULTIMODAL SPLIT MODELING}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3025}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30257}, pages = {1}, abstract = {This paper presents results of applying Fuzzy Inference System for estimation of the number of potential Park and Ride users. Usually it is difficult to evaluate the number of users because it depends on human factor and data in the considered system are uncertain. In such situation the traditional mathematical approaches can not take into consideration rough data. Therefore a fuzzy approach can be applied in this case. A fuzzy methodology is treated as a proper way to describe choice of mode of transport, and especially that uncertainty accompanied of choosing process has rather fuzzy character. The proposed approach is based on the Mamdani Fuzzy Inference System and for calculation there is used Matlab software with Fuzzy Logic Toolbox. Mamdani model requires, as an input data, knowledge of the shape of membership function. These functions can be calibrated taking into consideration results of questionnaires conducted among users of Park and Ride system. Due to lack of representative sample of users, one has decided to use results of experts' questionnaires as a input data for calibration the shape of membership functions. Describing factor will be generalized cost of the trip for different modes of transport. Proposed approach consists of two main stages: modeling of share of public/private transport trips and Multimodal model estimating number of Park and Ride users. Verification of presented methodology is treated as an indirect proof. Proposed approach can be applied for estimation of bi-modal split. Then the results are compared with traditional approaches based on logit functions. Comparable results of proposed fuzzy approach with traditional logit models can be treated as a confirmation of chosen methodology.}, subject = {Architektur }, language = {en} } @inproceedings{Ubysz, author = {Ubysz, Andrzej}, title = {MATHEMATICAL DESCRIPTION OF SELF-EXCITED VIBRATIONS IN SILO WALLS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3029}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30294}, pages = {7}, abstract = {The paper contains a description of dynamic effects in the silo wall during the outflow of a stored material. The work allows for determining the danger of construction damage due to resonant vibrations and is of practical importance by determining the influence of cyclic pressures and vibro-creeping during prolonged use of a silo. The paper was devised as a result of tests on silo walls in semi-technical scale. The model is generally applicable and allows for identification of parameters in real- size silos as well.}, subject = {Architektur }, language = {en} } @inproceedings{Loemker, author = {L{\"o}mker, Thorsten Michael}, title = {SOLVING REVITALIZATION-PROBLEMS BY THE USE OF A CONSTRAINT PROGRAMING LANGUAGE}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2987}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29874}, pages = {13}, abstract = {This research focuses on an approach to describe principles in architectural layout planning within the domain of revitalization. With the aid of mathematical rules, which are executed by a computer, solutions to design problems are generated. Provided that "design" is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a problem, an exemplary method will be described to solve such problems in architectural layout planning. To avoid conflicts relating to theoretical subtleness, a customary approach adopted from Operations Research has been chosen in this work. In this approach, design is a synonym for planning, which could be described as a systematic and methodical course of action for the analysis and solution of current or future problems. The planning task is defined as an analysis of a problem with the aim to prepare optimal decisions by the use of mathematical methods. The decision problem of a planning task is represented by an optimization model and the application of an efficient algorithm in order to aid finding one or more solutions to the problem. The basic principle underlying the approach presented herein is the understanding of design in terms of searching for solutions that fulfill specific criteria. This search is executed by the use of a constraint programming language.}, subject = {Architektur }, language = {en} } @inproceedings{HelbingKestingTreiberetal., author = {Helbing, D. and Kesting, A. and Treiber, M. and L{\"a}mmer, S. and Sch{\"o}nhof, M.}, title = {DECENTRALIZED APPROACHES TO ADAPTIVE TRAFFIC CONTROL AND AN EXTENDED LEVEL OF SERVICE CONCEPT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2910}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29107}, pages = {19}, abstract = {Traffic systems are highly complex multi-component systems suffering from instabilities and non-linear dynamics, including chaos. This is caused by the non-linearity of interactions, delays, and fluctuations, which can trigger phenomena such as stop-and-go waves, noise-induced breakdowns, or slower-is-faster effects. The recently upcoming information and communication technologies (ICT) promise new solutions leading from the classical, centralized control to decentralized approaches in the sense of collective (swarm) intelligence and ad hoc networks. An interesting application field is adaptive, self-organized traffic control in urban road networks. We present control principles that allow one to reach a self-organized synchronization of traffic lights. Furthermore, vehicles will become automatic traffic state detection, data management, and communication centers when forming ad hoc networks through inter-vehicle communication (IVC). We discuss the mechanisms and the efficiency of message propagation on freeways by short-range communication. Our main focus is on future adaptive cruise control systems (ACC), which will not only increase the comfort and safety of car passengers, but also enhance the stability of traffic flows and the capacity of the road ("traffic assistance"). We present an automated driving strategy that adapts the operation mode of an ACC system to the autonomously detected, local traffic situation. The impact on the traffic dynamics is investigated by means of a multi-lane microscopic traffic simulation. The simulation scenarios illustrate the efficiency of the proposed driving strategy. Already an ACC equipment level of 10\% improves the traffic flow quality and reduces the travel times for the drivers drastically due to delaying or preventing a breakdown of the traffic flow. For the evaluation of the resulting traffic quality, we have recently developed an extended level of service concept (ELOS). We demonstrate our concept on the basis of travel times as the most important variable for a user-oriented quality of service.}, subject = {Architektur }, language = {en} } @inproceedings{BauerKandlerWeiss, author = {Bauer, Marek and Kandler, A. and Weiß, Hendrik}, title = {MODEL OF TRAM LINE OPERATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2921}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29217}, pages = {11}, abstract = {From passenger's perspective punctuality is one of the most important features of trams operations. Unfortunately in most cases this feature is only insufficiently fulfilled. In this paper we present a simulation model for trams operation with special focus on punctuality. The aim is to get a helpful tool for designing time-tables and for analyzing the effects by changing priorities for trams in traffic lights respectively the kind of track separation. A realization of trams operations is assumed to be a sequence of running times between successive stops and times spent by tram at the stops. In this paper the running time is modeled by the sum of its mean value and a zero-mean random variable. With the help of multiple regression we find out that the average running time is a function depending on the length of the sections and the number of intersections. The random component is modeled by a sum of two independent zero-mean random variables. One of these variables describes the disturbance caused by the process of waiting at an intersection and the other the disturbance caused by the process of driving. The time spent at a stop is assumed to be a random variable, too. Its distribution is estimated from given measurements of these stop times for different tram lines in Krak{\´o}w. Finally a special case of the introduced model is considered and numerical results are presented. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.}, subject = {Architektur }, language = {en} } @inproceedings{WallFoersterNeumannetal., author = {Wall, Wolfgang A. and F{\"o}rster, Christiane and Neumann, Malte and Ramm, Ekkehard}, title = {ADVANCES IN FLUID-STRUCTURE INTERACTION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2916}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29161}, pages = {17}, abstract = {For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements. Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme.}, subject = {Architektur }, language = {en} } @inproceedings{Petrova, author = {Petrova, Lyllia B.}, title = {STATIC ANALYSIS ON MODELS OF CONTINUOUS ORTHOTROPIC THIN-WALLED PRISMATIC SHELL STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3000}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30007}, pages = {8}, abstract = {The paper presents a linear static analysis on continuous orthotropic thin-walled shell structures simply supported at the transverse ends with a random deformable contour of the cross section. The external loads can be random as well. The class of this structures involves most of the bridges, scaffold bridges, some roof structures etc. A numerical example of steel continuous structures on five spans with an open contour of the cross-section has been solved. The examination of the structure has used the following two computation models: a prismatic structure consisting of isotropic strips, a plates and ribs, with considering their real interaction, and a smooth orthotropic plate equivalent to the structure in the first model. The displacements and forces of the structure characterizing its stressed and deformed condition have been determined. The results obtained from the two solutions have been analyzed. The study on the structure is made with the force method in combination with the analytical finite strip method (AFSM) in displacements. The basic system is obtained by separating the superstructure from the understructure at the places of intermediate supports and consists of two parts. The first part is a single span thin-walled prismatic shell structure; the second part presents supports (columns, space frames etc.). The connection between the superstructure and intermediate supports is made under random supporting conditions. The forces at the supporting points in the direction of the connections removed are assumed to be the basic unknowns of the force method. The solution of the superstructure has been accomplished by the AFSM in displacements. The structure is divided in only one (transverse) direction into a finite number of plain strips connected to each other in longitudinal linear nodes. The three displacements of the points on the node lines and the rotation around those lines have been assumed to be the basic unknown in each node. The boundary conditions of each strip of the basic system correspond to the simply support along the transverse ends and the restraint along the longitudinal ones. The particular strip of the basic system has been solved by the method of the single trigonometric series. The method is reduced to solving a discrete structure in displacements and restoring its continuity at the places of the sections made in respect to both the displacements and forces. The two parts of the basic system have been solved in sequence under the action of single values of each of the basic unknowns and with the external load. The solution of the support part is accomplished using software for analyzing structures by the FEM. The basic unknown forces have been determined from system of canonic equations, the conditions of the deformations continuity on the places of the removed connections under superstructure and intermediate supports. The final displacements and forces at a random point of a continuous superstructure have been determined using the principle of superposition. The computations have been carried by software developed with Visual Fortran version 5.0 for PC.}, subject = {Architektur }, language = {en} } @inproceedings{Skowronek, author = {Skowronek, Marek}, title = {PROBABILISTIC LIMIT STATE ANALYSIS OF MONUMENTAL STRUCTURE BY MONTE CARLO SIMULATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3022}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30222}, pages = {10}, abstract = {The concept is presented of the sensitivity analysis of the limit state of the structure with respect to selected basic variables. The sensitivity is presented in the form of the probability distribution of the limit state of the structure. The analysis is performed by the problem-oriented Monte Carlo simulation procedure. The procedure is based on the problem's definition of the elementary event, as a structural limit state. Thus the sample space consists of limit states of the structure. Defined on the sample space the one-dimensional random multiplier is introduced. This multiplier refers to the dominant basic variable (group of variables) of the problem. Numerical procedure results in the set of random numbers. Normalized relative histogram of this set is an estimator of the PDF of the limit state of the structure. Estimators of reliability, or the probability of failure are statistical characteristics of this histogram. The procedure is illustrated by the example of sensitivity analysis of the serviceability limit state of monumental structure. It is the colonnade of Licheń Basilica, situated in central Poland. Limit state of the structure is examined with reference to the upper deck horizontal deflection. Wind actions are taken as dominant variables. An assumption is made that the wind load intensities acting on the lower and on the upper storey of the colonnade, respectively, are identically distributed, but correlated random variables. Three correlation variants of these variables are considered. Relevant limit state histograms are analysed thereafter. The paper ends with the conclusions referring to the method and some general remarks on the fully probabilistic design.}, subject = {Architektur }, language = {en} } @inproceedings{SeylerSchwarz, author = {Seyler, Steve and Schwarz, W.}, title = {MODERN PHOTOGRAMMETRY IN CIVIL ENGINEERING - EXAMPLES FOR MONITORING AND EVALUATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3019}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30192}, pages = {13}, abstract = {Monitoring und Bewertung sind Hauptaufgaben im Management bzw. der Revitalisierung von Bauwerken. Unterschiedliche Verfahren k{\"o}nnen bei der Akquisition der erforderlichen geometrischen Information, wie z. B. Gr{\"o}ße oder Verformung eines Geb{\"a}udes, eingesetzt werden. Da das Potenzial der digitalen Fotografie kontinuierlich w{\"a}chst, stellt die Industriephotogrammetrie heute eine bedeutende Alternative zu den klassischen Verfahren wie Dehnmessstreifen oder anderen taktilen Sensoren dar. Moderne Industriephotogrammetrie erfasst die Bilder mittels digitaler Systeme. Dies bedeutet, dass die Information digitaler Bilder mit Hilfe der digitalen Bildverarbeitung untersucht werden muss, um die Bildkoordinaten der Messpunkte zu erhalten. Eine der Aufgaben der Bildverarbeitung f{\"u}r photogrammetrische Zwecke besteht somit darin, den Mittelpunkt von kreisf{\"o}rmigen Marken zu lokalisieren. Die modernen Operatoren liefern Subpixelgenauigkeit f{\"u}r die Koordinaten des Punktes. Das optische Messverfahren der Industriephotogrammetrie erfordert hinsichtlich der Hardware in erster Linie hochaufl{\"o}sende digitale Kameras. Dabei lassen sich die Kameras in Videokameras, HighSpeed-Kameras, intelligente Kameras sowie so genannte Consumer und Professionelle Kameras unterscheiden. Die geometrische Aufl{\"o}sung digitaler HighEnd-Kameras liegt heute bei {\"u}ber 10 Megapixel. In punkto Datentransfer zum Rechner sind verschiedene Standards am Markt verf{\"u}gbar, z. B. USB2.0, GigE-Vision, CameraLink oder Firewire. Die Wahl des Standards h{\"a}ngt immer von der spezifischen Aufgabenstellung ab, da keine der Techniken eine f{\"u}hrende Position einnimmt. Die moderne Photogrammetrie bietet viele neue M{\"o}glichkeiten f{\"u}r das Monitoring und die Bewertung von Bauwerken. Sie kann ein-, zwei-, drei- oder vierdimensionale Informationen liefern, falls erforderlich auch in Echtzeit. Als ber{\"u}hrungsloses Messverfahren ist der Einsatz der Photogrammetrie noch m{\"o}glich, wenn die taktilen Sensoren z. B. aufgrund ihres Platzbedarfes nicht mehr eingesetzt werden k{\"o}nnen. Hochaufl{\"o}sende Videokameras erlauben es, selbst dynamische Untersuchungen mit großer Pr{\"a}zision durchzuf{\"u}hren.}, subject = {Architektur }, language = {de} } @inproceedings{BraunesDonath, author = {Braunes, J{\"o}rg and Donath, Dirk}, title = {COMPUTERGEST{\"U}TZTE PLANUNG IM BESTAND VON DER DIGITALEN BESTANDSERFASSUNG ZUR PLANUNGSUNTERST{\"U}TZUNG IM CAAD}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2933}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29338}, pages = {10}, abstract = {F{\"u}r eine gesicherte Planung im Bestand, sind eine F{\"u}lle verschiedenster Informationen zu ber{\"u}cksichtigen, welche oft erst w{\"a}hrend des Planungs- oder Bauprozesses gewonnen werden. Voraussetzung hierf{\"u}r bildet immer eine Bestandserfassung. Zwar existieren Computerprogramme zur Unterst{\"u}tzung der Bestandserfassung, allerdings handelt es sich hierbei ausschließlich um Insell{\"o}sungen. Der Export der aufgenommenen Daten in ein Planungssystem bedingt Informationsverluste. Trotz der potentiellen M{\"o}glichkeit aktueller CAAD/BIM Systeme zur Verwaltung von Bestandsdaten, sind diese vorrangig f{\"u}r die Neubauplanung konzipiert. Die durchg{\"a}ngige Bearbeitung von Sanierungsprojekten von der Erfassung des Bestandes {\"u}ber die Entwurfs- und Genehmigungsplanung bis zur Ausf{\"u}hrungsplanung innerhalb eines CAAD/BIM Systems wird derzeit nicht ad{\"a}quat unterst{\"u}tzt. An der Professur Informatik in der Architektur (InfAR) der Fakult{\"a}t Architektur der Bauhaus-Universit{\"a}t Weimar entstanden im Rahmen des DFG Sonderforschungsbereich 524 "Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken" in den letzten Jahren Konzepte und Prototypen zur fachlich orientierten Unterst{\"u}tzung der Planung im Bestand. Der Fokus lag dabei in der Erfassung aller planungsrelevanter Bestandsdaten und der Abbildung dieser in einem dynamischen Bauwerksmodell. Aufbauend auf diesen Forschungsarbeiten befasst sich der Artikel mit der kontextbezogenen Weiterverwendung und gezielten Bereitstellung von Bestandsdaten im Prozess des Planens im Bestand und der Integration von Konzepten der planungsrelevanten Bestandserfassung in markt{\"u}bliche CAAD/BIM Systeme.}, subject = {Architektur }, language = {de} } @inproceedings{GurtovyTynchuk, author = {Gurtovy, O. G. and Tynchuk, S.O.}, title = {RESEARCH OF DEFORMATION OF MULTILAYERED PLATES ON UNDEFORMABLE BASIS BY UNFLEXURAL SPECIFIED MODEL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2961}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29613}, pages = {6}, abstract = {Stress-strain state (SSS) of multilayered plates on undeformable foundation is investigated. The settlement circuit of transverse loaded plate is formed by symmetrical attaching of a plate concerning a surface of contact to the foundation. The plate of the double thickness becomes bilateral symmetrically loaded concerning its median surface. It allows to model only unflexural deformation that reduces amount of unknown and the general order of differentiation of resolving system of the equations. The developed refined continual model takes into account deformations of transverse shear and transverse compression in high iterative approximation. Rigid contact between the foundation and a plate, and also shear without friction on a surface of contact of a plate with the foundation is considered. Calculations confirm efficiency of such approach, allowing to receive decisions which is qualitative and quantitatively close to three-dimensional solutions.}, subject = {Architektur }, language = {en} } @inproceedings{SchleinkoferSchaefervanTreecketal., author = {Schleinkofer, Matthias and Sch{\"a}fer, T. and van Treeck, Christoph and Rank, Ernst}, title = {VOM LASERSCAN ZUM PLANUNGSTAUGLICHEN PRODUKTMODELL}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3015}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30159}, pages = {18}, abstract = {Im Bereich der Altbausanierung und der Bestandserfassung im Bauwesen ist es h{\"a}ufig notwendig, bestehende Pl{\"a}ne hinsichtlich des Bauwerkszustandes zu aktualisieren oder, wenn diese Pl{\"a}ne nicht (mehr) zug{\"a}nglich sind, g{\"a}nzlich neue Planunterlagen des Ist-Zustandes zu erstellen. Ein komfortabler Weg, diese Bauwerksdaten zu erheben, er{\"o}ffnet die Technologie der Laservermessung. Der vorliegende Artikel stellt in diesem Zusammenhang Ans{\"a}tze zur Teilautomatisierung der Generierung eines dreidimensionalen Computermodells eines Bauwerkes vor. Als Ergebnis wird ein Volumenmodell bereitgestellt, in dem zun{\"a}chst die geometrischen und topologischen Informationen {\"u}ber Fl{\"a}chen, Kanten und Punkte im Sinne eines B-rep Modells beschrieben sind. Die Objekte dieses Volumenmodells werden mit Verfahren aus dem Bereich der k{\"u}nstlichen Intelligenz analysiert und in Bauteilklassen systematisch kategorisiert. Die Kenntnis der Bauteilsemantik erlaubt es somit, aus den Daten ein Bauwerks-Produktmodell abzuleiten und dieses einzelnen Fachplanern - etwa zur Erstellung eines Energiepasses - zug{\"a}nglich zu machen. Der Aufsatz zeigt den erfolgreichen Einsatz virtueller neuronaler Netze im Bereich der Bestandserfassung anhand eines komplexen Beispiels.}, subject = {Architektur }, language = {de} } @inproceedings{Meis, author = {Meis, Jochen}, title = {SERVICE DESIGN AND SERVICE MANAGEMENT WITH THE SERVICE BLUEPRINTING METHODOLOGY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2990}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29908}, pages = {11}, abstract = {A new application of software technology is the application area of smart living or sustainable living. Within this area application platforms are designed and realized with the goal to support value added services. In this context value added services integrates microelectronics, home automation and services to enhance the attractiveness of flats, homes and buildings. Especially real estate companies or service providers dealing with home services are interested in an effective design and management of their services. Service Engineering is the approved approach for designing customer oriented service processes. Service engineering consists of several phases; from situation analysis to service creation and service design to service management. This article will describe how the method service blueprint can be used to design service processes. Smart living includes all actions to enlarge a flat to a smart home for living. One special requirement of this application domain is the use of local components (actuators, sensors) within service processes. This article will show how this extended method supports service providers to improve the quality of customer oriented service processes and the derivation of needed interfaces of involved actors. For the civil engineering process it will be possible to derive needed information from a built in home automation system. The aim is to show, how to get needed smart local components to fullfill later offered it-supported value added services. Value added services focused on inhabitants are grouped to consulting and information, care and supervision, leisure time activities, repairs, mobility and delivery, safety and security, supply and disposal.}, subject = {Architektur }, language = {en} } @inproceedings{Ostrowski, author = {Ostrowski, M.}, title = {INTEGRATED MATHEMATICAL MODELLING AS A BASIS FOR DECISION MAKING IN WATER MANAGEMENT}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2997}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29979}, pages = {9}, abstract = {Water resources development and management is a complex problem. It includes the design and operation of single system components, often as part of larger interrelated systems and usually on the basis of river basins. While several decades ago the dominant objective was the maximization of economic benefit, other objectives have evolved as part of the sustainable development envisaged. Today, planning and operation of larger water resources systems is practically impossible without adequate computer tools, normally being one or several models, increasingly combined with data bank management systems and multi criteria assessment procedures in decision support systems. The use of models in civil engineering already has a long history when structural engineering is considered. These design support models, however, must rather be seen as expert systems made to support the engineer with his daily work. They often have no direct link to stakeholders and the decision makers community. The scale of investigation is often much larger in water resources engineering than in structural engineering which is related to different stakeholders and decision making procedures. Still, several similarities are obvious which can be summarized as the search for a compromise solution on a complex, i.e. multiobjective and interdisciplinary decision problem. While in structural engineering e.g. aestetics, stability and energy consumption might be important evaluation criteria in addition to construction and maintenance cost other or additional criteria have to be considered in water resources planning such as political, environmental and social criteria. In this respect civil engineers tend to overemphasize technical criteria. For the future the existing expert systems should be embedded into an improved decision support shell, keeping in mind that decision makers are hardly interested in numerical modelling results. The paper will introduce into the problem and demonstrate the state of the art by means of an example.}, subject = {Architektur }, language = {en} } @inproceedings{PerepelitsaTebuevaShenkao, author = {Perepelitsa, V. A. and Tebueva, F.B. and Shenkao, Timour}, title = {SOLVABILITY EXPLORATION OF SEGMENTATION PROBLEM WITH LINEAR CONVOLUTION ALGORITHMS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2999}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29999}, pages = {13}, abstract = {The paper is dedicated to decidability exploration of market segmentation problem with the help of linear convolution algorithms. Mathematical formulation of this problem represents interval task of bipartite graph cover by stars. Vertices of the first partition correspond to types of commodities, vertices of the second - to customers groups. Appropriate method is offered for interval problem reduction to two-criterion task that has one implemented linear convolution algorithm. Unsolvability with the help of linear convolution algorithm of multicriterion, and consequently interval, market segmentation problem is proved.}, subject = {Architektur }, language = {en} } @inproceedings{Klingert, author = {Klingert, Maik}, title = {THE USAGE OF IMAGE PROCESSING METHODS FOR INTERPRETATION OF THERMOGRAPHY DATA}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2977}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29777}, pages = {13}, abstract = {For assessment of old buildings, thermal graphic analysis aided with infra-red camera have been employed in a wide range nowadays. Image processing and evaluation can be economically practicable only if the image evaluation can also be automated to the largest extend. For that reason methods of computer vision are presented in this paper to evaluate thermal images. To detect typical thermal image elements, such as thermal bridges and lintels in thermal images respectively gray value images, methods of digital image processing have been applied, of which numerical procedures are available to transform, modify and encode images. At the same time, image processing can be regarded as a multi-stage process. In order to be able to accomplish the process of image analysis from image formation through perfecting and segmentation to categorization, appropriate functions must be implemented. For this purpose, different measuring procedures and methods for automated detection and evaluation have been tested.}, subject = {Architektur }, language = {en} } @inproceedings{KnauerDammeierMeffert, author = {Knauer, Uwe and Dammeier, T. and Meffert, Beate}, title = {THE STRUCTURE OF ROAD TRAFFIC SCENES AS REVEALED BY UNSUPERVISED ANALYSIS OF THE TIME AVERAGED OPTICAL FLOW}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2978}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29780}, pages = {9}, abstract = {The Lucas-Kanade tracker has proven to be an efficient and accurate method for calculation of the optical flow. However, this algorithm can reliably track only suitable image features like corners and edges. Therefore, the optical flow can only be calculated for a few points in each image, resulting in sparse optical flow fields. Accumulation of these vectors over time is a suitable method to retrieve a dense motion vector field. However, the accumulation process limits application of the proposed method to fixed camera setups. Here, a histogram based approach is favored to allow more than a single typical flow vector per pixel. The resulting vector field can be used to detect roads and prescribed driving directions which constrain object movements. The motion structure can be modeled as a graph. The nodes represent entry and exit points for road users as well as crossings, while the edges represent typical paths.}, subject = {Architektur }, language = {en} } @inproceedings{HuhntGielsdorf, author = {Huhnt, Wolfgang and Gielsdorf, F.}, title = {TOPOLOGICAL INFORMATION AS LEADING INFORMATION IN BUILDING PRODUCT MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2911}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29110}, pages = {11}, abstract = {Digital models of buildings are widely used in civil engineering. In these models, geometric information is used as leading information. Engineers are used to have geometric information, and, for instance, it is state of the art to specify a point by its three coordinates. However, the traditional approaches have disadvantages. Geometric information is over-determined. Thus, more geometric information is specified and stored than needed. In addition, engineers already deal with topological information. A denotation of objects in buildings is of topological nature. It has to be answered whether approaches where topological information becomes a leading role would be more efficient in civil engineering. This paper presents such an approach. Topological information is modelled independently of geometric information. It is used for denoting the objects of a building. Geometric information is associated to topological information so that geometric information "weights" a topology. The concept presented in this paper has already been used in surveying existing buildings. Experiences in the use of this concept showed that the number of geometric information that is required for a complete specification of a building could be reduced by a factor up to 100. Further research will show how this concept can be used in planning processes.}, subject = {Architektur }, language = {en} } @inproceedings{Stangenberg, author = {Stangenberg, Friedhelm}, title = {LIFETIME ORIENTED DESIGN CONCEPTS UNDER ASPECTS OF DEGRADATION}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2915}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170328-29154}, pages = {25}, abstract = {Optimum technological solutions must take into account the entire life cycle of structures including design procedures as well as quality assurance, inspection, maintenance, and repair strategies. Unfortunately, current design standards do not provide a satisfactory basis to ensure expected structural lifetimes. The latter may vary from only a few years for temporary structures to over a century for bridges, water dams or nuclear repositories. Consistent scientific concepts are urgently required to cover this wide spectrum of lifetimes in structural design and maintenance. This was a motivation for a group of scientists at the Ruhr-University Bochum (RUB) to start a special research program supported by the German Research Foundation (DFG) within the Cooperative Research Center SFB 398 since 1996. Institutes of the University Wuppertal and of the University Essen-Duisburg joined the research group. The goal of the Center is to study sources of damage and deterioration in materials and structures, to develop consistent models and simulation methods, to predict structural lifetimes and finally to integrate this predictions into new lifetime-oriented design strategies. Research activities in our center are organised in three Project Groups as follows: - Modelling of lifetime effects - Methods for lifetime-oriented structural analyses - Future lifespan-oriented design strategies.}, subject = {Architektur }, language = {en} } @inproceedings{PaolucciVenturino, author = {Paolucci, Anna Maria and Venturino, Ezio}, title = {NONLINEAR DYNAMICS AND WAVELETS IN DISCRETE BIOMATHEMATICAL MODELS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2998}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29984}, pages = {25}, abstract = {A discrete ecoepidemiological model is considered. Its dynamics is studied by using wavelet decomposition.}, subject = {Architektur }, language = {en} } @inproceedings{ZolotovAkimovSidorov, author = {Zolotov, Alexander B. and Akimov, Pavel and Sidorov, Vladimir}, title = {DISCRETE-CONTINUAL BOUNDARY ELEMENT METHODS OF ANALYSIS FOR TWO-DIMENSIONAL AND THREE-DIMENSIONAL STRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3041}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30419}, pages = {22}, abstract = {The aim of this paper is to present so-called discrete-continual boundary element method (DCBEM) of structural analysis. Its field of application comprises buildings constructions, structures and also parts and components for the residential, commercial and un-inhabitant structures with invariability of physical and geometrical parameters in some dimensions. We should mention here in particular such objects as beams, thin-walled bars, strip foundations, plates, shells, deep beams, high-rise buildings, extensional buildings, pipelines, rails, dams and others. DCBEM comes under group of semianalytical methods. Semianalytical formulations are contemporary mathematical models which currently becoming available for realization due to substantial speed-up of computer productivity. DCBEM is based on the theory of the pseudodifferential boundary equations. Corresponding pseudodifferential operators are discretely approximated using Fourier analysis or wavelet analysis. The main DCBEM advantages against the other methods of the numerical analysis is a double reduction in dimension of the problem (discrete numerical division applied not to the full region of the interest but only to the boundary of the region cross section, as a matter of fact one is solving an one-dimensional problem with the finite step on the boundary area of the region), one has opportunities to carrying out very detailed analysis of the specific chosen zones, simplified initial data preparation, simplistic and adaptive algorithms. There are two methods to define and conduct DCBEM analysis developed - indirect (IDCBEM) and direct (DDCBEM), thus indirect like in boundary element method (BEM) applied and used little bit more than direct.}, subject = {Architektur }, language = {en} } @inproceedings{Kasparek, author = {Kasparek, Eva}, title = {CONVERGENCE OF A NEW CONSISTENT FOLDED PLATE THEORY}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2972}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29724}, pages = {10}, abstract = {The design of challenging space structures frequently relies on the theory of folded plates. The models are composed of plane facets of which the bending and membrane stiffness are coupled along the folds. In conventional finite element analysis of faceted structures the continuity of the displacement field is enforced exclusively at the nodes. Since approximate solutions for transverse and for in-plane displacements are not members of the same function space, separation occurs in between the common nodes of adjacent elements. It is shown that the kinematic assumptions of Bernoulli are accounted for this incompatibility along the edges in facet models. A general answer to this problem involves substantial modification of plate and membrane theory, but a straight forward formulation can be derived for simply folded plates, structures, whose folds do not intersect. A broad class of faceted structures, including models of various curved shells, belong to this category and can be calculated consistently. The additional requirements to assure continuity concern the mapping of displacement derivatives on the edges. An appropriate finite facet element provides node and edge-oriented degrees of freedom, whose transformation to system degrees of freedom, depends on the geometric configuration at each node. The concept is implemented using conform triangular elements. To evaluate the new approach, the energy norm of representative structures for refined meshes is calculated. The focus is placed on the mathematical convergence towards reliable solutions obtained from finite volume models.}, subject = {Architektur }, language = {en} } @inproceedings{Rohr, author = {Rohr, Stefan}, title = {NEUE M{\"O}GLICHKEITEN IN DER ABLAUFPLANUNG DURCH DIE EREIGNISORIENTIERTE SIMULATION VON PRODUKTIONSPROZESSEN}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.3006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-30060}, pages = {63}, abstract = {Durch die Betrachtung des Produktions-Prozesses als zentrales Transformationselement wird die Struktur der Bauproduktion realit{\"a}tsnah gefasst. Die Integration der prozessorientierten Kostendefinition setzt relevante Kostenparameter und Produktionsfaktoren so in Beziehung, dass sie im Einklang mit der realen Kostenstruktur und Kostendynamik einer Baustelle stehen. Die Beziehung zwischen Bauzeit und Kosten wird direkt erfasst und ausgewertet. Der hohen Dynamik der Bauproduktion zwischen kapazit{\"a}tsbeschr{\"a}nkten Einsatzmitteln und Produktionsprozessen wurde durch das Poolmodell und der Simulation als Berechnungsmethode Rechnung getragen. Eine einfache Modellierung von sich zyklusartig wiederholenden Arbeitsvorg{\"a}ngen (Taktplanung) ist m{\"o}glich. Die Taktbildung vollzieht sich bei der Simulation durch Kapazit{\"a}tsbeschr{\"a}nkungen ohne Zutun des Benutzers. Durch eine Optimierungsmethode kann automatisiert nach der kosteng{\"u}nstigsten oder zeitlich schnellsten Produktionsvariante gesucht werden}, subject = {Architektur }, language = {de} }