@article{EirinhevskyDikhnyakEirichevskyetal.1997,
  author    = {{\^E}irinhevsky, V. V. and D{\^i}khnyak, B. M. and {\^E}irichevsky, R. V. and {\^E}{\^i}zub, Y. G.},
  title     = {Determination of the Temperature of Dissipative Warming and Parameters of Fracture in Elastomers with using of Singular Finite Elements},
  doi       = {10.25643/bauhaus-universitaet.547},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5471},
  year      = {1997},
  abstract  = {For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated.},
  subject      = {Elastomer},
  language  = {en}
}
@article{HildebrandHechtBliedtneretal.,
  author    = {Hildebrand, J{\"o}rg and Hecht, Kerstin and Bliedtner, Jens and M{\"u}ller, Hartmut},
  title     = {Laser Beam Polishing of Quartz Glass Surfaces},
  series = {Physics Procedia},
  journal   = {Physics Procedia},
  doi       = {10.1016/j.phpro.2011.03.056},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170418-31366},
  pages     = {452 -- 461},
  abstract  = {The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It's a fact that the temperature developing while polishing determines the reachable surface smoothing and, as a negative result, causes material tensions. To find out which parameters are important for the laser polishing process and the surface roughness respectively and to estimate material tensions, temperature simulations and extensive polishing experiments took place. During these experiments starting and machining parameters were changed and temperatures were measured contact-free.},
  subject      = {Laser},
  language  = {en}
}
@article{AlsaadVoelker,
  author    = {Alsaad, Hayder and V{\"o}lker, Conrad},
  title     = {Der K{\"u}hlungseffekt der personalisierten L{\"u}ftung},
  series = {Bauphysik},
  volume    = {2020},
  journal   = {Bauphysik},
  number    = {volume 42, issue 5},
  publisher = {Ernst \& Sohn bei John Wiley \& Sons},
  address   = {Hoboken},
  doi       = {10.25643/bauhaus-universitaet.4272},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201020-42723},
  pages     = {218 -- 225},
  abstract  = {Personalisierte L{\"u}ftung (PL) kann die thermische Behaglichkeit sowie die Qualit{\"a}t der eingeatmeten Atemluft verbessern, in dem jedem Arbeitsplatz Frischluft separat zugef{\"u}hrt wird. In diesem Beitrag wird die Wirkung der PL auf die thermische Behaglichkeit der Nutzer unter sommerlichen Randbedingungen untersucht. Hierf{\"u}r wurden zwei Ans{\"a}tze zur Bewertung des K{\"u}hlungseffekts der PL untersucht: basierend auf (1) der {\"a}quivalenten Temperatur und (2) dem thermischen Empfinden. Grundlage der Auswertung sind in einer Klimakammer gemessene sowie numerisch simulierte Daten. Vor der Durchf{\"u}hrung der Simulationen wurde das numerische Modell zun{\"a}chst anhand der gemessenen Daten validiert. Die Ergebnisse zeigen, dass der Ansatz basierend auf dem thermischen Empfinden zur Evaluierung des K{\"u}hlungseffekts der PL sinnvoller sein kann, da bei diesem die komplexen physiologischen Faktoren besser ber{\"u}cksichtigt werden.},
  subject      = {L{\"u}ftung},
  language  = {de}
}