@inproceedings{HildebrandWudtkeWerner,
  author    = {Hildebrand, J{\"o}rg and Wudtke, Idna and Werner, Frank},
  title     = {M{\"O}GLICHKEITEN DER MATHEMATISCHEN BESCHREIBUNG VON PHASENUMWANDLUNGEN IM STAHL BEI SCHWEIß- UND WIG-NACHBEHANDLUNGSPROZESSEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2968},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29684},
  pages     = {13},
  abstract  = {In the final decades many scientists were occupied intensively with the change of materials during a process and their mathematical descriptions. The extensive and extensive analyses were supported by the advanced computer science. A mathematical description of the phase transformation is a condition for a realistic FE simulation of the state of microstructure. It is possible to simulate the temperature and stress field also in complex construction based on the state of microstructure. In the last years a great number of mathematical models were expanded to describe the transformation between different phases. For the development of the models for transformation kinetics it is practical to subdivide into isothermal and non-isothermal processes according to the thermal conditions. Some models for the description of the transformation with non-isothermal processes represent extensions for isothermal of processes. A part of parameters for the describing equations can be derived from the time-temperature-transformation diagrams in the literature. Furthermore the two possibilities of transformation are considered by different models - diffusion controlled and not diffusion controlled. The material-specific characteristics can be simulated during the transformation for each individual phase in a realistic FE analyses. Also new materials can be simulated after a modification of the parameters in the describing equations for the phase transformation. The effects in the temperature and stress field are a substantial reason for the investigation of the phase transformation during the welding and TIG-dressing processes.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{GoebelHildebrandWerner,
  author    = {G{\"o}bel, Michael and Hildebrand, J{\"o}rg and Werner, Frank},
  title     = {NUMERISCHES MODELL F{\"U}R DIE SIMULATION EINER LASERSTRAHLSCHWEIßUNG VON QUARZGLAS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2958},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29589},
  pages     = {14},
  abstract  = {Ausgehend von den fundierten Erfahrungen, die f{\"u}r das Schweißen von verschiedensten Metallen vorliegen, wird an der Professur Stahlbau der Bauhaus-Universit{\"a}t Weimar ein neuartiges Verfahren zum CO2-Laserstrahlschweißen von Quarzglas numerisch untersucht. Dabei kommt die kommerzielle FE-Software SYSWELD® zum Einsatz. Die erforderlichen Versuche werden in Zusammenarbeit mit dem Institut f{\"u}r F{\"u}getechnik und Werkstoffpr{\"u}fung GmbH aus Jena realisiert. Die numerische Analyse wird eingesetzt, um geeignete Prozessparameter zu bestimmen und deren Auswirkungen auf die transienten thermischen und mechanischen Vorg{\"a}nge, die w{\"a}hrend des Schweißvorgangs ablaufen abzubilden. Um die aus der Simulation erhaltenen Aussagen zu {\"u}berpr{\"u}fen, ist es erforderlich, das Berechnungsmodell mittels Daten aus Versuchsschweißungen zu kalibrieren. Dabei sind die verwendeten Materialmodelle sowie die der Simulation zugrunde gelegten Materialkennwerte zu validieren. Es stehen verschiedene rheologische Berechnungsmodelle zur Auswahl, die die viskosen Materialeigenschaften des Glases abbilden. Dabei werden die drei mechanischen Grundelemente, die HOOKEsche Feder, der NEWTONsche D{\"a}mpfungszylinder und das ST.-VENANT-Element miteinander kombiniert. Die M{\"o}glichkeit, thermische und mechanische Vorg{\"a}nge innerhalb des Glases w{\"a}hrend des Schweißvorgangs und nach vollst{\"a}ndiger Abk{\"u}hlung, vorhersagen zu k{\"o}nnen, gestattet es den Schweißvorgang {\"u}ber eine Optimierung der Verfahrensparameter gezielt dahingehend zu beeinflussen, die Wirtschaftlichkeit des Schweißverfahrens zu verbessern, und ein zuverl{\"a}ssiges Schweißergebnis zu erhalten. Dabei k{\"o}nnen auch nur unter hohem experimentellen Aufwand durchf{\"u}hrbare Versuche simuliert werden, um eine Vorhersage zu treffen, ob es zweckm{\"a}ßig ist, den Versuch auch in der Praxis zu fahren. Dies f{\"u}hrt zu einer Reduzierung des experimentellen Aufwandes und damit zu einer Verk{\"u}rzung des Entwicklungszeitraumes f{\"u}r das angestrebte Verfahren.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{WudtkeWerner,
  author    = {Wudtke, Idna and Werner, Frank},
  title     = {MODELLING OF MATERIAL PHENOMENA OF STEEL IN CONSTITUTIVE RELATIONS IN CONTEXT OF WELDING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2903},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29032},
  pages     = {16},
  abstract  = {The application of partly decoupled approach by means of continuum mechanics facilitates the calculation of structural responses due to welding. The numerical results demonstrate the ability of a qualitative prediction of welded connections. As it is intended to integrate the local effects of a joint in structural analysis of steel constructions, it is necessary to meet higher approaches towards quality. The wide array of material parameters are presented, which are affecting the thermal, metallurgical and mechanical behavior, and which have to be identified. For that purpose further investigations are necessary to analyze the sensitivity of the models towards different material properties. The experimental determination of every material parameter is not possible due to the extraordinary laborious efforts needed. Besides that, experimentally identified parameters can be applied only for the tested steel quality for measured temperature-time regimes. For that reason alternative approaches for identification of material parameters, such as optimization strategies, have to be applied. After a definition of material parameters a quantitative prediction of welded connections will also be possible. Numerical results show the effect of phase transformation, activated by welding process, on residual stress state. As these phenomena occur in local areas in the range of crystal and grain sizes, the description of microscopic phenomena and their propagation on a macroscopic level due to approaches of homogenization might be expedient. Nevertheless, one should bear in mind, the increasing number of material parameters as well as the complexity of their experimental determination. Thus the microscopic approach should always be investigated under the scope of ability and efficiency of a required prediction. Under certain circumstances a step backwards, adopting a phenomenological approach, also can be beneficial.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{VuWerner,
  author    = {Vu, Anh Tuan and Werner, Frank},
  title     = {OPTIMIZATION OF STEEL STRUCTURES BASED ON DIFFERENTIAL EVOLUTION ALGORITHM},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2900},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29007},
  pages     = {11},
  abstract  = {Steel structural design is an integral part of the building construction process. So far, various methods of design have been applied in practice to satisfy the design requirements. This paper attempts to acquire the Differential Evolution Algorithms in automatization of specific synthesis and rationalization of design process. The capacity of the Differential Evolution Algorithms to deal with continuous and/or discrete optimization of steel structures is also demonstrated. The goal of this study is to propose an optimal design of steel frame structures using built-up I-sections and/or a combination of standard hot-rolled profiles. All optimized steel frame structures in this paper generated optimization solutions better than the original solution designed by the manufacturer. Taking the criteria regarding the quality and efficiency of the practical design into consideration, the produced optimal design with the Differential Evolution Algorithms can completely replace conventional design because of its excellent performance.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{QuerengaesserWernerFirmenich2000,
  author    = {Quereng{\"a}sser, Stephan and Werner, Frank and Firmenich, Berthold},
  title     = {Durchg{\"a}ngiges Informationsmanagement f{\"u}r den Bauprozeß von Einfamilienh{\"a}usern},
  doi       = {10.25643/bauhaus-universitaet.589},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5892},
  year      = {2000},
  abstract  = {Informations-und Kommunikationtechniken haben im Bauwesen noch nicht die gew{\"u}nschten Vorteile f{\"u}r Kosten und Qualit{\"a}t von Bauobjekten erzielt. Die Vielfalt der daf{\"u}r genutzten Systeme und Formate f{\"u}hrt h{\"a}ufig zu Redundanzen und Informationsverlusten in den Planungs- und Bauprozessen sowie Problemen beim Datenaustausch zwischen den Systemen. Durch die Datenmengen, die in CAD, AVA, Terminplanung, Tabellenkalkulation, Textverarbeitung etc. durch unterschiedliche Beteiligte erzeugt werden, ist dar{\"u}ber hinaus das Risiko einer unterschiedlichen Datenaktualit{\"a}t enorm. Als Konsequenz dieser Erkenntnisse bestand die Aufgabe, eine ganzheitliche und durchg{\"a}ngige Produkt- und Prozeßstrategie f{\"u}r den preiswerten Einfamilienhausbau zu entwickeln. Die Grundlage daf{\"u}r bildet ein komplexes System von rationellen Entwurfsregeln, Konstruktionsl{\"o}sungen und Bau- und Baustofflogistikkonzepten auf der Basis moderner Informations- und Kommunikationstechnologien.},
  subject      = {Einfamilienhaus},
  language  = {de}
}