@book{OPUS4-2182, title = {Simulationsforum 2013 - Schweißen und W{\"a}rmebehandlung}, editor = {Hildebrand, J{\"o}rg and Loose, Tobias and Sakkiettibutra, Jens and Brand, Marcus}, publisher = {F{\"o}rderverein W{\"a}rmebehandlung und Schweißen e.V.}, address = {Weimar}, isbn = {978-3-00-045902-3}, doi = {10.25643/bauhaus-universitaet.2182}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140512-21820}, pages = {234}, abstract = {Das Buch ver{\"o}ffentlicht 22 Fachbeitr{\"a}ge der Konferenz "Simulationsforum 2013 - Schweißen und W{\"a}rmebehandlung".}, subject = {Schweißen}, language = {de} } @article{AdamatzkySchubert, author = {Adamatzky, Andrew and Schubert, Theresa}, title = {Slime mold microfluidic logical gates}, series = {Materials Today}, journal = {Materials Today}, doi = {10.1016/j.mattod.2014.01.018}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31168}, pages = {86 -- 91}, abstract = {We demonstrate how logical operations can be implemented in ensembles of protoplasmic tubes of acellular slime mold Physarum polycephalum. The tactile response of the protoplasmic tubes is used to actuate analogs of two- and four-input logical gates and memory devices. The slime mold tube logical gates display results of logical operations by blocking flow in mechanically stimulated tube fragments and redirecting the flow to output tube fragments. We demonstrate how XOR and NOR gates are constructed. We also exemplify circuits of hybrid gates and a memory device. The slime mold based gates are non-electronic, simple and inexpensive, and several gates can be realized simultaneously at sites where protoplasmic tubes merge.}, subject = {Physarum polycephalum}, language = {en} } @phdthesis{Chilingaryan, author = {Chilingaryan, Naira}, title = {Industrial Heritage: In-Between Memory and Transformation}, doi = {10.25643/bauhaus-universitaet.2229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140624-22291}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Exploratory Research into Transformation Processes of Former Industrial Complexes of Leipziger Baumwollspinnerei (Leipzig) and Mattatoio di Testaccio (Rome); New Meanings of Industrial Heritage Physical manifestations of the Industrial Revolution left a permanent imprint on the complexion of cities. Abandonment that followed the deindustrialization contributed to an estrangement, turning derelict industrial spaces and run-down factories into a ballast to conjure with. At present, industrial heritage management applies flexibility and creativity, partially overcoming the essentially traditional paradigm of heritage preservation. This approach permits sustainable conservation - utilization and integration of disused industrial constructs in the contemporary urban landscape. Being a part of the European cultural stock, industrial heritage is an exciting and unique setting from many perspectives. It is defined and consumed by many markets, ranging from the industrial heritage tourism to the market of special events and festivals. Reused industrial buildings and factories come into view as products of post-industrial societies, fitting to the Western post-industrial (consumer) culture, offering a field of activities that are at an interface between the industrial history and contemporary socio-cultural milieu. Alteration of values, growth of new roles and definitions of industrial heritage, generated by functional restructuring, is a subject which is often left behind the general discussion about sustainable conservation and adaptive reuse of industrial heritage. Yet, in the modified state, industrial heritage is very complex to understand and to define. By conducting a desk and a case study research of former industrial complexes - Leipziger Baumwollspinnerei and Mattatoio di Testaccio, this doctoral thesis aims to identify industrial heritage as a contemporary (post-industrial) concept. Observation of ideas, values and definitions that emerge as a consequence of the transformation and re-conceptualization of industrial heritage are intended to raise awareness and appreciation of industrial heritage in the full richness of its contemporary interpretation.}, subject = {Denkmal}, language = {en} } @phdthesis{Hildebrandt, author = {Hildebrandt, Paula Marie}, title = {Staubaufwirbeln oder die Kunst der Partizipation}, doi = {10.25643/bauhaus-universitaet.2158}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140410-21589}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {262}, abstract = {Die Dissertation Staubaufwirbeln oder die Kunst der Partizipation stellt die Frage, ob und inwiefern k{\"u}nstlerische Interventionen zur Aktualisierung und Entwicklung demokratischer Teilhabe beitragen k{\"o}nnen. Im Zentrum der Untersuchung stehen sechs Projektgruppen, die experimentelle Freir{\"a}ume gestalten, in denen neue Formen von Demokratielernen, Stadtnutzung, gesellschaftlicher Repr{\"a}sentation und Symbolpolitik erprobt werden. Die Kunst der Partizipation wird in f{\"u}nf Dimensionen beschrieben: Initiative, Kollektivit{\"a}t, Inszenierung, {\"O}ffentlichkeit und Kooperation. Sie erweitert damit das Repertoire demokratischer Beteiligungsformen sowie gegenw{\"a}rtige Kunstbegriffe. Ihre heimliche Relevanz besteht darin, sich immer wieder dem Risiko auszusetzen, von allen Seiten als unzureichend betrachtet zu werden. Demokratie konstituiert sich hier als {\"a}sthetische Erfahrung. Die Kunst besteht darin, die Fl{\"u}chtigkeit demokratischer Teilhabe erfahrbar zu machen, also gestaltbar und ver{\"a}nderbar.}, subject = {Stadt}, language = {de} } @phdthesis{Kalugila, author = {Kalugila, Shubira}, title = {HOUSING INTERVENTIONS AND ITS INFLUENCE ON URBAN DEVELOPMENT: Opportunities and Challenges in Mixed Informal Settlements, in Dar es Salaam - Tanzania}, doi = {10.25643/bauhaus-universitaet.2293}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140902-22930}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {304}, abstract = {Rapid urbanisation that is not accompanied by socio-economic development strains the capacity of local and national governments to provide even basic services such as shelter. Informal settlements i.e. settlements not built or developed according to the formal regulations have become a solution to many urban dwellers in developing countries. In Tanzania informal settlements accommodate people from low, middle and high income groups. The study explores the nature of potentials and challenges posed by the existence of mixed socio-economic groups in informal settlements, including an assessment of what can be done to optimise utilisation of potentials and mitigation of conflicts. Using a case study strategy, the study was conducted in Dar es Salaam city focusing on Makongo mixed informal settlement. The results show that mixed informal settlements are as a result of several factors including uncoordinated energies of people. The urban development forces that bring change in the development of the city are stronger than the public states capacity to coordinate and manage them. Informal settlements also offer user-friendly land tenure, flexibility in house construction and proximity to livelihoods. Other factors include the nature of socio-economic living patterns and extension of urban boundaries. Community members operate using social norms. Advantages of mixed informal settlements include availability of plots according to needs and affordability while a disadvantage is, people of different socio-economic groups perceive problems differently. For policies to be effective, their formulation should be derived from what is happening on the ground i.e. addressing informal settlements according to their heterogeneity. Moreover, empowered local authorities can assist in implementing national development plans; also actors in land development including government institutions, non-governmental institutions, financial institutions, private sector, professionals, political leaders, research institutions, policy-makers and training institutions need to recognise, understand and respect each other's roles, and pull resources together to minimise problems related to informality in land development; utilise potentials and minimise challenges in mixed informal settlements in Dar es Salaam. Key words: Informal settlements, land development, urbanisation}, subject = {Verst{\"a}dterung}, language = {en} } @misc{GarischKutznerOehleretal., author = {Garisch, Mathias and Kutzner, Eva and Oehler, Vanessa and Patzer, Nicole and Schmeing, Carolin}, title = {Analyse von Terminpl{\"a}nen}, doi = {10.25643/bauhaus-universitaet.2139}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140317-21392}, pages = {61}, abstract = {Das Bachelorprojekt „Analyse von Terminpl{\"a}nen" besch{\"a}ftigt sich mit der Analyse der Abh{\"a}ngigkeiten zwischen den unterschiedlichen Vorg{\"a}ngen des Bauablaufs. Die Problematik in der Terminplanerstellung liegt darin, dass ein Terminplan nicht alle Hintergrundinformationen abbildet und es daher zu Projektverz{\"o}gerungen und Absprachefehlern kommen kann. Dieses Bachelorprojekt macht Gebrauch von bereits aufbereiteten Informationen zur genannten Problematik in Form eines vorangegangen Bachelorprojekts und eines Masterprojekts, sowie einer Umfrage des Instituts f{\"u}r Bauwirtschaft der Universit{\"a}t Kassel. In diesem Projekt werden 50 neue und 100 bereits existierende Terminpl{\"a}ne von diversen Unternehmen aus ganz Deutschland analysiert und ausgewertet. Die Analyse der Terminpl{\"a}ne basiert auf gef{\"u}hrten Experteninterviews. Das Interview ber{\"u}cksichtigt Faktoren wie zum Beispiel Darstellungsformen, Detaillierungsgrade, Abh{\"a}ngigkeiten, Vorgangsdauern oder Planungsgrundlagen. Durch die Befragung von m{\"o}glichst vielen Firmen konnte festgestellt werden, dass jeder Terminplanentwickler eine Vorgehensweise entwickelt, nach welcher er arbeitet. Außerdem ist in den Gespr{\"a}chen deutlich geworden, dass das Theorie- Praxis-Gef{\"a}lle sehr groß ist. Das heißt, dass theoretische Modelle aus der Ausbildung an beispielsweise Hochschulen, in der Praxis heutzutage wenig angewandt werden. Nach der Analyse der Terminpl{\"a}ne und Auswertung der Interviews, werden die Daten in eine vom vorangehenden Masterprojekt erstellte Excel-Tabelle eingepflegt. Die vorhandenen Informationen werden dann anhand verschiedenster Diagramme verglichen und ausgewertet.}, subject = {Analyse}, language = {de} } @phdthesis{Dang, author = {Dang, Trang}, title = {Automated Detailing of 4D Schedules}, doi = {10.25643/bauhaus-universitaet.2310}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20141006-23103}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {120}, abstract = {The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30\% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization.}, subject = {Simulation}, language = {en} } @article{VoelkerMaempelKornadt, author = {V{\"o}lker, Conrad and M{\"a}mpel, Silvio and Kornadt, Oliver}, title = {Measuring the human body's micro-climate using a thermal manikin}, series = {Indoor Air}, journal = {Indoor Air}, number = {24, 6}, doi = {10.25643/bauhaus-universitaet.3815}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181025-38153}, pages = {567 -- 579}, abstract = {The human body is surrounded by a micro-climate which results from its convective release of heat. In this study, the air temperature and flow velocity of this micro-climate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the micro-climate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the micro-climate shape strongly depends not only on the body segment, but also on boundary conditions: the higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the air flow in the micro-climate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient.}, subject = {Raumklima}, language = {en} } @article{MotraHildebrandDimmigOsburg, author = {Motra, Hem Bahadur and Hildebrand, J{\"o}rg and Dimmig-Osburg, Andrea}, title = {Assessment of strain measurement techniques to characterise mechanical properties of structural steel}, series = {Engineering Science and Technology, an International Journal}, journal = {Engineering Science and Technology, an International Journal}, doi = {10.1016/j.jestch.2014.07.006}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31540}, pages = {260 -- 269}, abstract = {Strain measurement is important in mechanical testing. A wide variety of techniques exists for measuring strain in the tensile test; namely the strain gauge, extensometer, stress and strain determined by machine crosshead motion, Geometric Moire technique, optical strain measurement techniques and others. Each technique has its own advantages and disadvantages. The purpose of this study is to quantitatively compare the strain measurement techniques. To carry out the tensile test experiments for S 235, sixty samples were cut from the web of the I-profile in longitudinal and transverse directions in four different dimensions. The geometry of samples are analysed by 3D scanner and vernier caliper. In addition, the strain values were determined by using strain gauge, extensometer and machine crosshead motion. Three techniques of strain measurement are compared in quantitative manner based on the calculation of mechanical properties (modulus of elasticity, yield strength, tensile strength, percentage elongation at maximum force) of structural steel. A statistical information was used for evaluating the results. It is seen that the extensometer and strain gauge provided reliable data, however the extensometer offers several advantages over the strain gauge and crosshead motion for testing structural steel in tension. Furthermore, estimation of measurement uncertainty is presented for the basic material parameters extracted through strain measurement.}, subject = {Baustahl}, language = {en} } @inproceedings{HijaziHusseinKoenig, author = {Hijazi, Ihab Hamzi and Hussein, M. H. and K{\"o}nig, Reinhard}, title = {Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building}, series = {9th 3DGeoInfo Conference}, booktitle = {9th 3DGeoInfo Conference}, address = {Dubai, UAE}, doi = {10.25643/bauhaus-universitaet.2508}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25089}, pages = {4}, abstract = {Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building}, subject = {Informatik}, language = {en} }