@inproceedings{StoimenovaLinsDatchevaetal.,
  author    = {Stoimenova, Eugenia and Lins, Yvonne and Datcheva, Maria and Schanz, Tom},
  title     = {INVERSE MODELLING OF SOIL HYDRAULIC CHARACTERISTIC FUNCTIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2985},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29858},
  pages     = {12},
  abstract  = {In this paper we evaluate 2D models for soil-water characteristic curve (SWCC), that incorporate the hysteretic nature of the relationship between volumetric water content θ and suction ψ. The models are based on nonlinear least squares estimation of the experimental data for sand. To estimate the dependent variable θ the proposed models include two independent variables, suction and sensors reading position (depth d in the column test). The variable d represents not only the position where suction and water content are measured but also the initial suction distribution before each of the hydraulic loading test phases. Due to this the proposed 2D regression models acquire the advantage that they: (a) can be applied for prediction of θ for any position along the column and (b) give the functional form for the scanning curves.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{LehnerHartmann,
  author    = {Lehner, Karlheinz and Hartmann, Dietrich},
  title     = {USING INTERVAL ANALYSIS FOR STRUCTURAL ENGINEERING PROBLEMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2984},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29844},
  pages     = {10},
  abstract  = {Interval analysis extends the concept of computing with real numbers to computing with real intervals. As a consequence, some interesting properties appear, such as the delivery of guaranteed results or confirmed global values. The former property is given in the sense that unknown numerical values are in known to lie in a computed interval. The latter property states that the global minimum value, for example, of a given function is also known to be contained in a interval (or a finite set of intervals). Depending upon the amount computation effort invested in the calculation, we can often find tight bounds on these enclosing intervals. The downside of interval analysis, however, is the mathematically correct, but often very pessimistic size of the interval result. This is in particularly due to the so-called dependency effect, where a single variable is used multiple times in one calculation. Applying interval analysis to structural analysis problems, the dependency has a great influence on the quality of numerical results. In this paper, a brief background of interval analysis is presented and shown how it can be applied to the solution of structural analysis problems. A discussion of possible improvements as well as an outlook to parallel computing is also given.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Kravchenko,
  author    = {Kravchenko, Vladislav},
  title     = {NEW APPLICATIONS OF PSEUDOANALYTIC FUNCTION THEORY},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2983},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29835},
  pages     = {3},
  abstract  = {We show a close relation between the Schr{\"o}dinger equation and the conductivity equation to a Vekua equation of a special form. Under quite general conditions we propose an algorithm for explicit construction of pseudoanalytic positive formal powers for the Vekua equation that as a consequence gives us a complete system of solutions for the Schr{\"o}dinger and the conductivity equations. Besides the construction of complete systems of exact solutions for the above mentioned second order equations and the Dirac equation, we discuss some other applications of pseudoanalytic function theory.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Krasnov,
  author    = {Krasnov, Yakov},
  title     = {ANALYTIC FUNCTIONS IN OPERATOR VARIABLES AS SOLUTION TO PDES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2982},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29822},
  pages     = {16},
  abstract  = {Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KoenigTauscher,
  author    = {K{\"o}nig, Markus and Tauscher, Eike},
  title     = {BERECHNUNG VON BAUABL{\"A}UFEN MIT VERSCHIEDENEN AUSF{\"U}HRUNGSVARIANTEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2981},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29816},
  pages     = {11},
  abstract  = {Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abh{\"a}ngigkeiten. Basierend auf diesen projektspezifischen Abh{\"a}ngigkeiten wird gew{\"o}hnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabl{\"a}ufe um ein Projekt zu realisieren. Welche dieser Ausf{\"u}hrungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls {\"A};nderungen oder St{\"o}rungen w{\"a}hrend des Bauablaufs auftreten, m{\"u}ssen die davon betroffenen Aufgaben und Abl{\"a}ufe per Hand modifiziert und alternative Aufgaben sowie Abl{\"a}ufe stattdessen ausgef{\"u}hrt werden. Diese Vorgehensweise ist oft sehr aufw{\"a}ndig und teuer. Aktuelle Forschungsans{\"a}tze besch{\"a}ftigen sich mit der automatischen Generierung von Bauabl{\"a}ufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabl{\"a}ufe mit Ausf{\"u}hrungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu k{\"o}nnen. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{KoenigLang,
  author    = {K{\"o}nig, Markus and Lang, H.},
  title     = {ANWENDUNG DES CASE-BASED REASONING BEI DER ERMITTLUNG VON VARIANTEN F{\"u}R DEN OBERBAU VON VERKEHRSFL{\"A}CHEN},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2980},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29808},
  pages     = {9},
  abstract  = {F{\"u}r die Ausf{\"u}hrung des Oberbaus von Verkehrsfl{\"a}chen existiert in Abh{\"a}ngigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei {\"a}hnlichen Voraussetzungen h{\"a}ufig gleichartige Ausf{\"u}hrungsvarianten gew{\"a}hlt. Um eine m{\"o}gliche L{\"o}sungsvariante f{\"u}r den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte ber{\"u}cksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universit{\"a}t Weimar wurde die Anwendung des Case-Based Reasoning f{\"u}r die Auswahl von Ausf{\"u}hrungsvarianten f{\"u}r den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von {\"a}hnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt.},
  subject      = {Architektur <Informatik>},
  language  = {de}
}
@inproceedings{Knyziak,
  author    = {Knyziak, Piotr},
  title     = {ANALYSIS THE TECHNICAL STATE FOR LARGE-PANEL RESIDENTIAL BUILDINGS BEHIND ASSISTANCE OF ARTIFICIAL NEURAL NETWORKS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2979},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29792},
  pages     = {9},
  abstract  = {This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KnauerDammeierMeffert,
  author    = {Knauer, Uwe and Dammeier, T. and Meffert, Beate},
  title     = {THE STRUCTURE OF ROAD TRAFFIC SCENES AS REVEALED BY UNSUPERVISED ANALYSIS OF THE TIME AVERAGED OPTICAL FLOW},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2978},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29780},
  pages     = {9},
  abstract  = {The Lucas-Kanade tracker has proven to be an efficient and accurate method for calculation of the optical flow. However, this algorithm can reliably track only suitable image features like corners and edges. Therefore, the optical flow can only be calculated for a few points in each image, resulting in sparse optical flow fields. Accumulation of these vectors over time is a suitable method to retrieve a dense motion vector field. However, the accumulation process limits application of the proposed method to fixed camera setups. Here, a histogram based approach is favored to allow more than a single typical flow vector per pixel. The resulting vector field can be used to detect roads and prescribed driving directions which constrain object movements. The motion structure can be modeled as a graph. The nodes represent entry and exit points for road users as well as crossings, while the edges represent typical paths.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{Klingert,
  author    = {Klingert, Maik},
  title     = {THE USAGE OF IMAGE PROCESSING METHODS FOR INTERPRETATION OF THERMOGRAPHY DATA},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2977},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29777},
  pages     = {13},
  abstract  = {For assessment of old buildings, thermal graphic analysis aided with infra-red camera have been employed in a wide range nowadays. Image processing and evaluation can be economically practicable only if the image evaluation can also be automated to the largest extend. For that reason methods of computer vision are presented in this paper to evaluate thermal images. To detect typical thermal image elements, such as thermal bridges and lintels in thermal images respectively gray value images, methods of digital image processing have been applied, of which numerical procedures are available to transform, modify and encode images. At the same time, image processing can be regarded as a multi-stage process. In order to be able to accomplish the process of image analysis from image formation through perfecting and segmentation to categorization, appropriate functions must be implemented. For this purpose, different measuring procedures and methods for automated detection and evaluation have been tested.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{KlawitterOstrowski,
  author    = {Klawitter, Arne and Ostrowski, M.},
  title     = {INTEGRATED RAINFALL RUNOFF MODELLING IN SMALL URBANIZED CATCHMENTS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2976},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29767},
  pages     = {12},
  abstract  = {A concept for integrated modeling of urban and rural hydrology is introduced. The concept allows for simulations on the catchment scale as well as on the local scale. It is based on a 2-layer-approach which facilitates the parallel coupling of a catchment hydrology model with an urban hydrology model, considering the interactions between the two systems. The concept has been implemented in a computer model combining a grid based distributed hydrological catchment model and a hydrological urban stormwater model based on elementary units. The combined model provides a flexible solution for time and spatial scale integration and offers to calculate separate water balances for urban and rural hydrology. Furthermore, it is GIS-based which allows for easy and accurate geo-referencing of urban overflow structures, which are considered as points of interactions between the two hydrologic systems. Due to the two-layer-approach, programs of measures can be incorporated in each system separately. The capabilities of the combined model have been tested on a hypothetical test case and a real world application. It could be shown that the model is capable of accurately quantifying the effects of urbanization in a catchment. The affects of urbanization can be analyzed at the catchment outlet, but can also be traced back to its origins, due to the geo-referencing of urban overflow structures. This is a mayor advantage over conventional hydrological catchment models for the analysis of land use changes.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}