@inproceedings{BaitschHartmann2004,
  author    = {Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Object Oriented Finite Element Analysis for Structural Optimization using p-Elements},
  doi       = {10.25643/bauhaus-universitaet.108},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1089},
  year      = {2004},
  abstract  = {The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@article{GalffyWellmannJelicHartmann2004,
  author    = {Galffy, Mozes and Wellmann Jelic, Andres and Hartmann, Dietrich},
  title     = {Lifetime-oriented modelling of vortex-induced across-wind vibrations on bridge tie rods},
  doi       = {10.25643/bauhaus-universitaet.253},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2536},
  year      = {2004},
  abstract  = {The influence of vortex-induces vibrations on vertical tie rods has been proved as a determinant load factor in the lifetime-oriented dimensioning of arched steel bridges. Particularly, the welded connection plates between the suspenders and the arches often exhibit cracks induced primarily rods. In this context, the synchronization of the vortex-shedding to the rod motion in a critical wind velocity range, the so-called lock-in effect, is of essential interest.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KaapkeMilbradt2004,
  author    = {Kaapke, Kai and Milbradt, Peter},
  title     = {Voronoi-based finite volume method for transport problems},
  doi       = {10.25643/bauhaus-universitaet.255},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2558},
  year      = {2004},
  abstract  = {Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KaklauskasCervenkaCervenka2004,
  author    = {Kaklauskas, Gintaris and Cervenka, Vladimir and Cervenka, Jan},
  title     = {Deflection Calculation of RC Beams: Finite Element Software versus Design Code Methods},
  doi       = {10.25643/bauhaus-universitaet.249},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2498},
  year      = {2004},
  abstract  = {The paper investigates accuracy of deflection predictions made by the finite element package ATENA and design code methods ACI and EC2. Deflections have been calculated for a large number of experimental reinforced concrete beams reported by three investigators. Statistical parameters have been established for each of the technique at different load levels, separately for the beams with small and moderate reinforcement ratio.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KashiyamaHamadaTaniguchi2004,
  author    = {Kashiyama, Kazuo and Hamada, Hidetaka and Taniguchi, Takeo},
  title     = {Large Scale Finite Element Simulation and Modeling Using GIS/CAD for Environmental Flows in Urban Area},
  doi       = {10.25643/bauhaus-universitaet.267},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2675},
  year      = {2004},
  abstract  = {A large-scale computer modeling and simulation method is presented for environmental flows in urban area. Several GIS and CAD data were used for the preparation of shape model and an automatic mesh generation method based on Delaunay method was developed. Parallel finite element method based on domain decomposition method was employed for the numerical simulation of natural phenomena. The present method was applied to the simulation of flood flow and wind flow in urban area. The present method is shown to be a useful planning and design tool for the natural disasters and the change of environments.},
  subject      = {Geoinformationssystem},
  language  = {en}
}
@article{KeJianMing2004,
  author    = {Ke, Chen and Jian Ming, Lu},
  title     = {Study of Analysis System for Bridge Test},
  doi       = {10.25643/bauhaus-universitaet.254},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2547},
  year      = {2004},
  abstract  = {Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{KwakKim2004,
  author    = {Kwak, Hyo-Gyoung and Kim, Jin-Kook},
  title     = {Efficient Shoring System in RC Frame Structures},
  doi       = {10.25643/bauhaus-universitaet.251},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2511},
  year      = {2004},
  abstract  = {In this paper, systematic analyses for the shoring systems installed to support the applied loads during construction are performed on the basis of the numerical approach. On the basis of a rigorous time-dependent analysis, structural behaviors of reinforced concrete (RC) frame structures according to the changes in design variables such as the types of shoring systems, shore stiffness and shore spacing are analyzed and discussed. The time-dependent deformations of concrete such as creep and shrinkage and construction sequences of frame structures are also taken into account to minimize the structural instability and to reach to an improved design of shoring system because these effects may increase the axial forces delivered to the shores. In advance, the influence of the column shortening effect, generally mentioned in a tall building structure, is analyzed. From many parametric studies, it has been finally concluded that the most effective shoring system in RC frame structures is 2S1R (two shores and one reshore) regardless of the changes in design variables.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{LeeLee2004,
  author    = {Lee, Kangkun and Lee, Kijang},
  title     = {Additional bending moment for shear-lag phenomenon in tube structures},
  doi       = {10.25643/bauhaus-universitaet.247},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2472},
  year      = {2004},
  abstract  = {Framed-tube system with multiple internal tubes is analysed using an orthotropic box beam analogy approach in which each tube is individually modelled by a box beam that accounts for the flexural and shear deformations, as well as the shear-lag effects. A simple numerical modeling technique is proposed for estimating the shear-lag phenomenon in tube structures with multiple internal tubes. The proposed method idealizes the framed-tube structures with multiple internal tubes as equivalent multiple tubes, each composed of four equivalent orthotropic plate panels. The numerical analysis is based on the minimum potential energy principle in conjunction with the variational approach. The shear-lag phenomenon of such structures is studied taking into account the additional bending moments in the tubes. A detailed work is carried out through the numerical analysis of the additional bending moment. The moment factor is further introduced to identify the shear lag phenomenon along with the additional moment.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MelnikovSemenov2004,
  author    = {Melnikov, B. E. and Semenov, Artem},
  title     = {Application of Multimodel Method of Elasto-Plastic Analysis for the Multilevel Computation of Structures},
  doi       = {10.25643/bauhaus-universitaet.248},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2487},
  year      = {2004},
  abstract  = {Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MilbradtSchierbaumSchwoeppe2004,
  author    = {Milbradt, Peter and Schierbaum, Jochen and Schw{\"o}ppe, Axel},
  title     = {Finite Cell-Elements of Higher Order},
  doi       = {10.25643/bauhaus-universitaet.252},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2524},
  year      = {2004},
  abstract  = {The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}