@article{EirinhevskyDikhnyakEirichevskyetal.1997,
  author    = {{\^E}irinhevsky, V. V. and D{\^i}khnyak, B. M. and {\^E}irichevsky, R. V. and {\^E}{\^i}zub, Y. G.},
  title     = {Determination of the Temperature of Dissipative Warming and Parameters of Fracture in Elastomers with using of Singular Finite Elements},
  doi       = {10.25643/bauhaus-universitaet.547},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5471},
  year      = {1997},
  abstract  = {For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated.},
  subject      = {Elastomer},
  language  = {en}
}
@inproceedings{ZolotovAkimov2003,
  author    = {Zolotov, Alexander B. and Akimov, Pavel},
  title     = {Discrete-continual Finite Element Method of Analysis for Three-dimensional Curvilinear Structures},
  doi       = {10.25643/bauhaus-universitaet.384},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3848},
  year      = {2003},
  abstract  = {This paper is devoted to discrete-continual finite element method (DCFEM) of analysis for three-dimensional curvilinear structures. Operational and variational formulations of the problem in the ring coordinate system are presented. The discrete-continual design model for structures with constant physical and geometrical parameters in longitudinal direction is offered on the basis of so-called curvilinear discrete-continual finite elements. Element coordinate system, approximation of nodal unknowns, construction of element nodal load vector are under consideration. Element system of differential equations is formulated with use of special generalized block-structured stiffness matrix of discrete-continual finite element. Local differential relations are formulated. Resultant multipoint boundary problem for system of ordinary differential equations is given. Method of analytical solution of multipoint boundary problems in structural analysis is offered as well. Its major peculiarities include universality, computer-oriented algorithm involving theory of distributions, computational stability, optimal conditionality of resultant systems, partial Jordan decomposition of matrix of coefficients, eliminating necessity of calculation of root vectors. Brief information concerning developed software is provided.},
  subject      = {Raumtragwerk},
  language  = {de}
}
@phdthesis{Zacharias,
  author    = {Zacharias, Christin},
  title     = {Numerical Simulation Models for Thermoelastic Damping Effects},
  doi       = {10.25643/bauhaus-universitaet.4735},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20221116-47352},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {191},
  abstract  = {Finite Element Simulations of dynamically excited structures are mainly influenced by the mass, stiffness, and damping properties of the system, as well as external loads. The prediction quality of dynamic simulations of vibration-sensitive components depends significantly on the use of appropriate damping models. Damping phenomena have a decisive influence on the vibration amplitude and the frequencies of the vibrating structure. However, developing realistic damping models is challenging due to the multiple sources that cause energy dissipation, such as material damping, different types of friction, or various interactions with the environment. This thesis focuses on thermoelastic damping, which is the main cause of material damping in homogeneous materials. The effect is caused by temperature changes due to mechanical strains. In vibrating structures, temperature gradients arise in adjacent tension and compression areas. Depending on the vibration frequency, they result in heat flows, leading to increased entropy and the irreversible transformation of mechanical energy into thermal energy. The central objective of this thesis is the development of efficient simulation methods to incorporate thermoelastic damping in finite element analyses based on modal superposition. The thermoelastic loss factor is derived from the structure's mechanical mode shapes and eigenfrequencies. In subsequent analyses that are performed in the time and frequency domain, it is applied as modal damping. Two approaches are developed to determine the thermoelastic loss in thin-walled plate structures, as well as three-dimensional solid structures. The realistic representation of the dissipation effects is verified by comparing the simulation results with experimentally determined data. Therefore, an experimental setup is developed to measure material damping, excluding other sources of energy dissipation. The three-dimensional solid approach is based on the determination of the generated entropy and therefore the generated heat per vibration cycle, which is a measure for thermoelastic loss in relation to the total strain energy. For thin plate structures, the amount of bending energy in a modal deformation is calculated and summarized in the so-called Modal Bending Factor (MBF). The highest amount of thermoelastic loss occurs in the state of pure bending. Therefore, the MBF enables a quantitative classification of the mode shapes concerning the thermoelastic damping potential. The results of the developed simulations are in good agreement with the experimental results and are appropriate to predict thermoelastic loss factors. Both approaches are based on modal superposition with the advantage of a high computational efficiency. Overall, the modeling of thermoelastic damping represents an important component in a comprehensive damping model, which is necessary to perform realistic simulations of vibration processes.},
  subject      = {Werkstoffd{\"a}mpfung},
  language  = {en}
}
@phdthesis{Will1999,
  author    = {Will, Johannes},
  title     = {Beitrag zur Standsicherheitsberechnung im gekl{\"u}fteten Fels in der Kontinuums- und Diskontinuumsmechanik unter Verwendung impliziter und expliziter Berechnungsstrategien},
  doi       = {10.25643/bauhaus-universitaet.58},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20040310-613},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {1999},
  subject      = {Staumauer},
  language  = {de}
}
@article{VuBacNguyenXuanChenetal.,
  author    = {Vu-Bac, N. and Nguyen-Xuan, Hung and Chen, Lei and Lee, C.K. and Zi, Goangseup and Zhuang, Xiaoying and Liu, G.R. and Rabczuk, Timon},
  title     = {A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2013/978026},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170426-31676},
  abstract  = {This paper presents a novel numerical procedure based on the combination of an edge-based smoothed finite element (ES-FEM) with a phantom-node method for 2D linear elastic fracture mechanics. In the standard phantom-node method, the cracks are formulated by adding phantom nodes, and the cracked element is replaced by two new superimposed elements. This approach is quite simple to implement into existing explicit finite element programs. The shape functions associated with discontinuous elements are similar to those of the standard finite elements, which leads to certain simplification with implementing in the existing codes. The phantom-node method allows modeling discontinuities at an arbitrary location in the mesh. The ES-FEM model owns a close-to-exact stiffness that is much softer than lower-order finite element methods (FEM). Taking advantage of both the ES-FEM and the phantom-node method, we introduce an edge-based strain smoothing technique for the phantom-node method. Numerical results show that the proposed method achieves high accuracy compared with the extended finite element method (XFEM) and other reference solutions.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{vanRooyenOlivier2004,
  author    = {van Rooyen, G.C. and Olivier, A. H.},
  title     = {Notes on structural analysis in a distributed collaboratory},
  doi       = {10.25643/bauhaus-universitaet.145},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1451},
  year      = {2004},
  abstract  = {The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@misc{Ullrich2005,
  type      = {Master Thesis},
  author    = {Ullrich, Carmen},
  title     = {Dynamische Analyse der Sprottetalbr{\"u}cke},
  doi       = {10.25643/bauhaus-universitaet.726},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-7268},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2005},
  abstract  = {Die vorliegende Arbeit besch{\"a}ftigt sich mit der dynamischen Analyse der Sprottetalbr{\"u}cke infolge aufgetretener Asphaltsch{\"a}den. Sie beinhaltet die Erstellung eines FE-Modells, der Darstellung der theoretischen Grundlagen der Dynamik sowie die Auswertung von berechneten Eigenformen und Asphaltspannungen unter Ber{\"u}cksichtigung der derzeit g{\"u}ltigen Normen.},
  subject      = {Finite-Elemente-Methode},
  language  = {de}
}
@inproceedings{Tzanev1997,
  author    = {Tzanev, D.},
  title     = {Entwurf eines objektorientierten Modells zur Analyse von Schalentragwerken},
  doi       = {10.25643/bauhaus-universitaet.439},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4397},
  year      = {1997},
  abstract  = {In der vorliegenden Arbeit werden dickwandige Schalentragwerke unter statischen Belastungen betrachtet. Die Schale besteht aus verschiedenen Zonen und in jeder Zone wird die Schalenmittelflaeche mittels eines eigenen Geometriegleichungssystems definiert. Das Verzerrungsfeld hat allen 6 unabhaengigen Komponenten unter der Annahme, dass die Querschnittsfasern, die normal zu der Mittelflaeche der unbelasteten Schale sind, geradelinig bleiben. Ein dreidimensionales isoparametrisches finites Element wird vorgeschlagen. Die Berechnung wird mit der Hilfe der Makroelemententechnik durchgefuehrt. In der Arbeit werden die wesentliche Parameter der Schalengeometrie, sowie auch entsprechendes Anteil von Klassen des konstruktiven Modells, definiert. Ein konstruktives Informationsmodell und ein FEM-Informationsmodell, werden entwickelt. Die Informationsverbindungen zwischen den beiden Modellen werden definiert. Diese objektorientierten Modelle werden in Programmiersprache Microsoft Visual C++ v.4.0 unter Windows 95 implementiert. Als numerisches Beispiel wird ein Bogenmauertragwerk betrachtet.},
  subject      = {Bogenstaumauer},
  language  = {de}
}
@article{TolokTolokGomenyuk1997,
  author    = {Tolok, V. A. and Tolok, A. V. and Gomenyuk, S. I.},
  title     = {The instrumental System of Mechanics Problems Analysis of the deformed Solid Body},
  doi       = {10.25643/bauhaus-universitaet.536},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5361},
  year      = {1997},
  abstract  = {In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics.},
  subject      = {Festk{\"o}rpermechanik},
  language  = {en}
}
@article{TalebiZiSilanietal.,
  author    = {Talebi, Hossein and Zi, Goangseup and Silani, Mohammad and Samaniego, Esteban and Rabczuk, Timon},
  title     = {A simple circular cell method for multilevel finite element analysis},
  series = {Journal of Applied Mathematics},
  journal   = {Journal of Applied Mathematics},
  doi       = {10.1155/2012/526846},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170426-31639},
  abstract  = {A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}