@article{JoshiHildebrandAloraieretal., author = {Joshi, Suraj and Hildebrand, J{\"o}rg and Aloraier, Abdulkareem S. and Rabczuk, Timon}, title = {Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate}, series = {Computational Materials Science}, journal = {Computational Materials Science}, doi = {10.1016/j.commatsci.2012.11.029}, pages = {559 -- 565}, abstract = {This paper presents several aspects of characterization of welding heat source parameters in Goldak's double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40\% to 80\% in increments of 10\%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak's double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters.}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiangWangetal., author = {Zhao, Jiyun and Jiang, Jin-Wu and Wang, L. and Guo, Wanlin and Rabczuk, Timon}, title = {Coarse-grained potentials of single-walled carbon nanotubes}, series = {Journal of the Mechanics and Physics of Solids}, journal = {Journal of the Mechanics and Physics of Solids}, abstract = {Coarse-grained potentials of single-walled carbon nanotubes}, subject = {Angewandte Mathematik}, language = {en} } @article{ReichertOlneyLahmer, author = {Reichert, Ina and Olney, Peter and Lahmer, Tom}, title = {Combined approach for optimal sensor placement and experimental verification in the context of tower-like structures}, series = {Journal of Civil Structural Health Monitoring}, volume = {2021}, journal = {Journal of Civil Structural Health Monitoring}, number = {volume 11}, publisher = {Heidelberg}, address = {Springer}, doi = {10.1007/s13349-020-00448-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44701}, pages = {223 -- 234}, abstract = {When it comes to monitoring of huge structures, main issues are limited time, high costs and how to deal with the big amount of data. In order to reduce and manage them, respectively, methods from the field of optimal design of experiments are useful and supportive. Having optimal experimental designs at hand before conducting any measurements is leading to a highly informative measurement concept, where the sensor positions are optimized according to minimal errors in the structures' models. For the reduction of computational time a combined approach using Fisher Information Matrix and mean-squared error in a two-step procedure is proposed under the consideration of different error types. The error descriptions contain random/aleatoric and systematic/epistemic portions. Applying this combined approach on a finite element model using artificial acceleration time measurement data with artificially added errors leads to the optimized sensor positions. These findings are compared to results from laboratory experiments on the modeled structure, which is a tower-like structure represented by a hollow pipe as the cantilever beam. Conclusively, the combined approach is leading to a sound experimental design that leads to a good estimate of the structure's behavior and model parameters without the need of preliminary measurements for model updating.}, subject = {Strukturmechanik}, language = {en} } @article{NguyenXuanRabczukNguyenThoietal., author = {Nguyen-Xuan, Hung and Rabczuk, Timon and Nguyen-Thoi, T. and Tran, T. and Nguyen-Thanh, Nhon}, title = {Computation of limit and shakedown loads using a node-based smoothed finite element method}, series = {International Journal for Numerical Methods in Engineering}, journal = {International Journal for Numerical Methods in Engineering}, doi = {10.1002/nme.3317}, pages = {287 -- 310}, abstract = {This paper presents a novel numerical procedure for computing limit and shakedown loads of structures using a node-based smoothed FEM in combination with a primal-dual algorithm. An associated primal-dual form based on the von Mises yield criterion is adopted. The primal-dual algorithm together with a Newton-like iteration are then used to solve this associated primal-dual form to determine simultaneously both approximate upper and quasi-lower bounds of the plastic collapse limit and the shakedown limit. The present formulation uses only linear approximations and its implementation into finite element programs is quite simple. Several numerical examples are given to show the reliability, accuracy, and generality of the present formulation compared with other available methods.}, subject = {Angewandte Mathematik}, language = {en} } @article{LeNguyenXuanAskesetal., author = {Le, C.V. and Nguyen-Xuan, Hung and Askes, H. and Rabczuk, Timon and Nguyen-Thoi, T.}, title = {Computation of limit load using edge-based smoothed finite element method and second-order cone programming}, series = {International Journal of Computational Methods}, journal = {International Journal of Computational Methods}, abstract = {Computation of limit load using edge-based smoothed finite element method and second-order cone programming}, subject = {Angewandte Mathematik}, language = {en} } @article{MarzbanLahmer, author = {Marzban, Samira and Lahmer, Tom}, title = {Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects}, series = {Journal of Statistical Theory and Practice}, journal = {Journal of Statistical Theory and Practice}, pages = {589 -- 611}, abstract = {Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects}, subject = {Angewandte Mathematik}, language = {en} } @article{TalebiSilaniRabczuk, author = {Talebi, Hossein and Silani, Mohammad and Rabczuk, Timon}, title = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation}, series = {Advances in Engineering Software}, journal = {Advances in Engineering Software}, pages = {82 -- 92}, abstract = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoLuZhangetal., author = {Zhao, Jun-Hua and Lu, Lixin and Zhang, Zhiliang and Guo, Wanlin and Rabczuk, Timon}, title = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {432 -- 438}, abstract = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates}, subject = {Angewandte Mathematik}, language = {en} } @article{HiguchiMacke, author = {Higuchi, Shoko and Macke, M.}, title = {Cost-benefit analysis for the optimal rehabilitation of deteriorating structures}, series = {Structural Safety}, journal = {Structural Safety}, pages = {291 -- 306}, abstract = {Cost-benefit analysis for the optimal rehabilitation of deteriorating structures}, subject = {Angewandte Mathematik}, language = {en} } @article{HiguchiMacke, author = {Higuchi, Shoko and Macke, M.}, title = {Cost-benefit based optimization of maintenance interventions for deteriorating structures}, series = {Structural Engineering/Earthquake Engineering}, journal = {Structural Engineering/Earthquake Engineering}, pages = {131 -- 147}, abstract = {Cost-benefit based optimization of maintenance interventions for deteriorating structures}, subject = {Angewandte Mathematik}, language = {en} }