@misc{Baron, author = {Baron, Nicole}, title = {Verflechtungen im st{\"a}dtischen Gef{\"u}ge. Rezension zu Barbara Heer (2019): Cities of entanglements. Social life in Johannesburg and Maputo through ethnographic comparison}, series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, volume = {2021}, journal = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, number = {Band 9, Heft 1/2}, publisher = {sub\urban e. V.}, address = {Berlin}, doi = {10.36900/suburban.v9i1/2.664}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44785}, pages = {235 -- 240}, abstract = {Dieser Artikel rezensiert die {\"u}berarbeitete Version von Barbara Heers Dissertation zu st{\"a}dtischen Verflechtungen in Johannesburg und Maputo. Das Buch ist 2019 im Transcript Verlag erschienen und umfasst 337 Seiten.}, subject = {S{\"u}dafrika}, language = {de} } @article{EhlersGrimmerStracketal., author = {Ehlers, Jan and Grimmer, Janine and Strack, Veronika and Huckauf, Anke}, title = {The influence of sham feedback on physiological processing during fear-driven stimulation}, series = {PLOS ONE}, journal = {PLOS ONE}, number = {Volume 16, issue 5, article e0251211}, publisher = {PLOS}, address = {San Francisco, Calif.}, doi = {10.1371/journal.pone.0251211}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210510-44249}, pages = {1 -- 17}, abstract = {Biofeedback constitutes a well-established, non-invasive method to voluntary interfere in emotional processing by means of cognitive strategies. However, treatment durations exhibit strong inter-individual variations and first successes can often be achieved only after a large number of sessions. Sham feedback constitutes a rather untapped approach by providing feedback that does not correspond to the participant's actual state. The current study aims to gain insights into mechanisms of sham feedback processing in order to support new techniques in biofeedback therapy. We carried out two experiments and applied different types of sham feedback on skin conductance responses and pupil size changes during affective processing. Results indicate that standardized but context-sensitive sham signals based on skin conductance responses exert a stronger influence on emotional regulation compared to individual sham feedback from ongoing pupil dynamics. Also, sham feedback should forego unnatural signal behavior to avoid irritation and skepticism among participants. Altogether, a reasonable combination of stimulus features and sham feedback characteristics enables to considerably reduce the actual bodily responsiveness already within a single session.}, subject = {Biofeedback}, language = {en} } @book{BrokowLogaEckardt2021, author = {Brokow-Loga, Anton and Eckardt, Frank}, title = {Stadtpolitik f{\"u}r alle}, publisher = {Graswurzelrevolution}, address = {Heidelberg}, doi = {10.25643/bauhaus-universitaet.4390}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43904}, publisher = {Bauhaus-Universit{\"a}t Weimar}, pages = {68}, year = {2021}, abstract = {Die Corona-Krise hat die Erosion st{\"a}dtischer Solidarit{\"a}t offen zu Tage treten lassen. Dagegen bringen Anton Brokow-Loga und Frank Eckardt in dieser Schrift die praktische Utopie einer solidarischen Postwachstumsstadt „auf den Punkt". Vom Commoning {\"u}ber die Umverteilung der st{\"a}dtischen Fl{\"a}chen bis zu einer sozial-{\"o}kologischen Verkehrswende: Eine progressive Stadtpolitik f{\"u}r alle {\"u}berwindet bisheriges Schubladendenken. Sie setzt stattdessen auf heterogene Zusammenh{\"a}nge und ungew{\"o}hnliche B{\"u}ndnisse. Zu dem hier umrissenen Vorhaben geh{\"o}rt auch, eine basisdemokratisch orientierte Stadtpolitik mit dem Ziel einer umfassenden Transformation von Stadt und Gesellschaft zu verkn{\"u}pfen. Wie kann ein Blick auf die kommunale Ebene helfen, globalen Ungerechtigkeiten zu begegnen? Welchen Weg weisen munizipalistische Plattformen und Vergemeinschaftungen jenseits von Privat- oder Staatseigentum?}, subject = {Transformation}, language = {de} } @article{CappachionePartschefeldOsburgetal., author = {Cappachione, Clotilde and Partschefeld, Stephan and Osburg, Andrea and Gliubizzi, Rocco and Gaeta, Carmine}, title = {Modified Carboxymethylcellulose-Based Scaffolds as New Potential Ecofriendly Superplasticizers with a Retardant Effect for Mortar: From the Synthesis to the Application}, series = {Materials}, volume = {2021}, journal = {Materials}, number = {volume 14, issue 13, article 3569}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma14133569}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44689}, pages = {1 -- 17}, abstract = {This article is focused on the research and development of new cellulose ether derivatives as innovative superplasticizers for mortar systems. Several synthetic strategies have been pursued to obtain new compounds to study their properties on cementitious systems as new bio-based additives. The new water-soluble admixtures were synthesized using a complex carboxymethylcellulose-based backbone that was first hydrolyzed and then sulfo-ethylated in the presence of sodium vinyl sulphonate. Starting with a complex biopolymer that is widely known as a thickening agent was very challenging. Only by varying the hydrolysis times and temperatures of the reactions was achieved the aimed goal. The obtained derivatives showed different molecular weight (Mw) and anionic charges on their backbones. An improvement in shear stress and dynamic viscosity values of CEM II 42.5R cement was observed with the samples obtained with a longer time of higher temperature hydrolysis and sulfo-ethylation. Investigations into the chemical nature of the pore solution, calorimetric studies and adsorption experiments clearly showed the ability of carboxymethyl cellulose superplasticizer (CMC SP) to interact with cement grains and influence hydration processes within a 48-h time window, causing a delay in hydration reactions in the samples. The fluidity of the cementitious matrices was ascertained through slump test and preliminary studies of mechanical and flexural strength of the hardened mortar formulated with the new ecological additives yielded values in terms of mechanical properties. Finally, the computed tomography (CT) images completed the investigation of the pore network structure of hardened specimens, highlighting their promising structure porosity.}, subject = {M{\"o}rtel}, language = {en} } @article{MeiabadiMoradiKaramimoghadametal., author = {Meiabadi, Mohammad Saleh and Moradi, Mahmoud and Karamimoghadam, Mojtaba and Ardabili, Sina and Bodaghi, Mahdi and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Modeling the Producibility of 3D Printing in Polylactic Acid Using Artificial Neural Networks and Fused Filament Fabrication}, series = {polymers}, volume = {2021}, journal = {polymers}, number = {Volume 13, issue 19, article 3219}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym13193219}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220110-45518}, pages = {1 -- 21}, abstract = {Polylactic acid (PLA) is a highly applicable material that is used in 3D printers due to some significant features such as its deformation property and affordable cost. For improvement of the end-use quality, it is of significant importance to enhance the quality of fused filament fabrication (FFF)-printed objects in PLA. The purpose of this investigation was to boost toughness and to reduce the production cost of the FFF-printed tensile test samples with the desired part thickness. To remove the need for numerous and idle printing samples, the response surface method (RSM) was used. Statistical analysis was performed to deal with this concern by considering extruder temperature (ET), infill percentage (IP), and layer thickness (LT) as controlled factors. The artificial intelligence method of artificial neural network (ANN) and ANN-genetic algorithm (ANN-GA) were further developed to estimate the toughness, part thickness, and production-cost-dependent variables. Results were evaluated by correlation coefficient and RMSE values. According to the modeling results, ANN-GA as a hybrid machine learning (ML) technique could enhance the accuracy of modeling by about 7.5, 11.5, and 4.5\% for toughness, part thickness, and production cost, respectively, in comparison with those for the single ANN method. On the other hand, the optimization results confirm that the optimized specimen is cost-effective and able to comparatively undergo deformation, which enables the usability of printed PLA objects.}, subject = {3D-Druck}, language = {en} } @article{LondongBarthSoebke, author = {Londong, J{\"o}rg and Barth, Marcus and S{\"o}bke, Heinrich}, title = {Modeling and Simulation of Source Separation in Sanitation Systems for Reducing Emissions of Antimicrobial Resistances}, series = {Water}, volume = {2021}, journal = {Water}, number = {Volume 13, issue 23, article 3342}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/w13233342}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211202-45338}, pages = {1 -- 19}, abstract = {Antimicrobial resistance (AMR) is identified by the World Health Organization (WHO) as one of the top ten threats to public health worldwide. In addition to public health, AMR also poses a major threat to food security and economic development. Current sanitation systems contribute to the emergence and spread of AMR and lack effective AMR mitigation measures. This study assesses source separation of blackwater as a mitigation measure against AMR. A source-separation-modified combined sanitation system with separate collection of blackwater and graywater is conceptually described. Measures taken at the source, such as the separate collection and discharge of material flows, were not considered so far on a load balance basis, i.e., they have not yet been evaluated for their effectiveness. The sanitation system described is compared with a combined system and a separate system regarding AMR emissions by means of simulation. AMR is represented in the simulation model by one proxy parameter each for antibiotics (sulfamethoxa-zole), antibiotic-resistant bacteria (extended-spectrum beta-lactamase E. Coli), and antibiotic re-sistance genes (blaTEM). The simulation results suggest that the source-separation-based sanitation system reduces emissions of antibiotic-resistant bacteria and antibiotic resistance genes into the aquatic environment by more than six logarithm steps compared to combined systems. Sulfa-methoxazole emissions can be reduced by 75.5\% by keeping blackwater separate from graywater and treating it sufficiently. In summary, sanitation systems incorporating source separation are, to date, among the most effective means of preventing the emission of AMR into the aquatic envi-ronment.}, subject = {Abwasser}, language = {en} } @article{Legatiuk, author = {Legatiuk, Dmitrii}, title = {Mathematical Modelling by Help of Category Theory: Models and Relations between Them}, series = {mathematics}, volume = {2021}, journal = {mathematics}, number = {volume 9, issue 16, article 1946}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math9161946}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210817-44844}, pages = {17}, abstract = {The growing complexity of modern practical problems puts high demand on mathematical modelling. Given that various models can be used for modelling one physical phenomenon, the role of model comparison and model choice is becoming particularly important. Methods for model comparison and model choice typically used in practical applications nowadays are computationbased, and thus time consuming and computationally costly. Therefore, it is necessary to develop other approaches to working abstractly, i.e., without computations, with mathematical models. An abstract description of mathematical models can be achieved by the help of abstract mathematics, implying formalisation of models and relations between them. In this paper, a category theory-based approach to mathematical modelling is proposed. In this way, mathematical models are formalised in the language of categories, relations between the models are formally defined and several practically relevant properties are introduced on the level of categories. Finally, an illustrative example is presented, underlying how the category-theory based approach can be used in practice. Further, all constructions presented in this paper are also discussed from a modelling point of view by making explicit the link to concrete modelling scenarios.}, subject = {Kategorientheorie}, language = {en} } @misc{Vollmer, author = {Vollmer, Lisa}, title = {In die G{\"a}nge gekommen: Kooperation von Zivilgesellschaft und Stadtpolitik. Rezension zu Michael Ziehl (2020): Koproduktion urbaner Resilienz. Das G{\"a}ngeviertel in Hamburg als Reallabor f{\"u}r eine zukunftsf{\"a}hige Stadtentwicklung mittels Kooperation von Zivilgesellschaft, Politik und Verwaltung.}, series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, volume = {2021}, journal = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, number = {Band 9, Heft 1/2}, publisher = {sub\urban e. V.}, address = {Berlin}, doi = {10.36900/suburban.v9i1/2.681}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44798}, pages = {241 -- 247}, abstract = {Schlagworte wir Kooperation, Koproduktion und Kollaboration sind in Planungswissenschaften und Architektur schwer in Mode. Selten wird allerdings dargelegt, was diese Art(en) der Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren auf der einen Seite und staatlichen Akteuren aus Politik und Verwaltung auf der anderen Seite von gew{\"o}hnlichen Formen der Partizipation und B{\"u}rger_innenbeteiligung unterscheidet. Anders im Buch von Michael Ziehl: Ihm gelingt es, anhand eines Fallbeispiels die intensive Zusammenarbeit zwischen Aktivist_innen rund ums Hamburger G{\"a}ngeviertel und verschiedenen st{\"a}dtischen Institutionen detailliert nachzuzeichnen und damit den qualitativen Unterschied zwischen Kooperation und Beteiligung nachvollziehbar zu machen.}, subject = {Hamburg}, language = {de} } @misc{Noeske, author = {Noeske, Jannik}, title = {Die Zukunft war jetzt}, series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, volume = {2021}, journal = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung}, number = {Band 9, Nr. 3/4}, publisher = {sub\urban e. V.}, address = {Berlin}, doi = {10.36900/suburban.v9i3/4.711}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220112-45573}, pages = {397 -- 402}, abstract = {Die US-amerikanische Kulturanthropologin Christina Schwenkel legt mit Building socialism eine quellenges{\"a}ttigte ethnografische Studie {\"u}ber Zerst{\"o}rung, Wiederaufbau und Nutzungsperspektiven der vietnamesischen Stadt Vinh vor. Ein besonderes Augenmerk liegt auf den agencies der Beteiligten. Im Zentrum der Untersuchung steht ein Quartier, dessen Wohnblocks mit materieller und ideeller Unterst{\"u}tzung der DDR errichtet wurden. Nicht nur sind die methodischen Zug{\"a}nge der Untersuchung vielversprechend und gewinnbringend - angesichts des drohenden Stadtumbaus, der f{\"u}r die Bewohner:innen des Quartiers Quang Trung Abriss und Verdr{\"a}ngung bedeuten w{\"u}rde, gewinnt ihre st{\"a}dtebauhistorische Ethnografie auch an politischer Relevanz.}, subject = {Vietnam}, language = {de} } @article{AnicPenavaSarhosisetal., author = {Anic, Filip and Penava, Davorin and Sarhosis, Vasilis and Abrahamczyk, Lars}, title = {Development and Calibration of a 3D Micromodel for Evaluation of Masonry Infilled RC Frame Structural Vulnerability to Earthquakes}, series = {Geosciences}, volume = {2021}, journal = {Geosciences}, number = {Voume 11, issue 11, article 468}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/geosciences11110468}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211202-45370}, pages = {23}, abstract = {Within the scope of literature, the influence of openings within the infill walls that are bounded by a reinforced concrete frame and excited by seismic drift forces in both in- and out-of-plane direction is still uncharted. Therefore, a 3D micromodel was developed and calibrated thereafter, to gain more insight in the topic. The micromodels were calibrated against their equivalent physical test specimens of in-plane, out-of-plane drift driven tests on frames with and without infill walls and openings, as well as out-of-plane bend test of masonry walls. Micromodels were rectified based on their behavior and damage states. As a result of the calibration process, it was found that micromodels were sensitive and insensitive to various parameters, regarding the model's behavior and computational stability. It was found that, even within the same material model, some parameters had more effects when attributed to concrete rather than on masonry. Generally, the in-plane behavior of infilled frames was found to be largely governed by the interface material model. The out-of-plane masonry wall simulations were governed by the tensile strength of both the interface and masonry material model. Yet, the out-of-plane drift driven test was governed by the concrete material properties.}, subject = {Verwundbarkeit}, language = {en} }