@phdthesis{Budarapu,
  author    = {Budarapu, Pattabhi Ramaiah},
  title     = {Adaptive multiscale methods for fracture},
  doi       = {10.25643/bauhaus-universitaet.2391},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150507-23918},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour. Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere. Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks. Key contributions The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture. A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable. A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed.},
  subject      = {Material},
  language  = {en}
}
@phdthesis{Aurin,
  author    = {Aurin, Ingo},
  title     = {Spurencodierung und Ber{\"u}hrungsmessung},
  doi       = {10.25643/bauhaus-universitaet.2397},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150526-23975},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {148},
  abstract  = {In der vorliegenden Ph.D.-Arbeit werden die Bereiche Materialit{\"a}t, Objektkultur und Physical Computing adressiert. Der Autor erkennt nun durch die durchlaufene intensive theoretische Betrachtungsweise des Themas Materialit{\"a}t die Bedeutung von Tastsinn und Objektoberfl{\"a}chen f{\"u}r den Alltag des praktizierenden Gestalters und proklamiert eine Wende und Hinwendung der Designpraxis zu den Potenzialen von Materialit{\"a}t und deren Bedeutung f{\"u}r die Akteure. Die Aufgabe der Praxisforschung ist es, eine inklusive Optimierungsmethode des Produktdesigns zu gestalten, mit der Designentwicklungen durch {\"u}berpr{\"u}fbare Nutzungsdaten optimiert werden k{\"o}nnen. Die taktile Pilotmethode ergab auf Basis der Generierung von Nutzerkarten Erkenntnisse {\"u}ber biometrische Werte, individuelle K{\"o}rpergr{\"o}ßen und unterschiedliche Handhabungsprinzipien.},
  subject      = {Materialit{\"a}t},
  language  = {de}
}
@phdthesis{Arkarapotiwong,
  author    = {Arkarapotiwong, Piyadech},
  title     = {THE INVESTIGATION OF LIVING HERITAGE ATTRIBUTES IN LIVING HERITAGE SITES},
  doi       = {10.25643/bauhaus-universitaet.2408},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150619-24086},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {303},
  abstract  = {The conservation of living heritage sites is a highly complex process. Two factors need careful consideration in order to achieve a balance in the management of such sites: the conservation demands of conservation experts for built heritage and the needs of local people for development of their heritage living space. The complexity of factors involved make for an interesting study of living heritage, taken up by this research in its main case study of the town of Nan in Thailand. Research into the historical background of Nan and its cultural heritage reveals a living heritage site, which is both unique and diverse. Present day Nan was examined using a variety of analysis tools, which were applied to data from interviews, empirical data, field surveys, and documents, in order to better understand the nature of the living heritage site and changing trends over time. Luang Prabang in Lao PDR, a World Heritage site since 1995, was also selected as a further case study with which to compare Nan's potential World Heritage status from a point of view of changes to living heritage attributes. The outcomes of the research indicate the importance of the management of the sites, which can be at risk of losing balance by focusing on one aspect of heritage to the detriment of the other. The conservation perspective, if allowed to dominate, as in Luang Prabang, can cause irreparable damage to the social fabric, where the development needs of the town are not met. This research concludes that a balance of power amongst stakeholders in the collaborative networks managing such sites is vital to sustaining a balance of living heritage attributes.},
  subject      = {Kulturerbe},
  language  = {en}
}