@inproceedings{ZwoelferThomasSchinketal.2004, author = {Zw{\"o}lfer, Michael and Thomas, Peter and Schink, Claus-J{\"u}rgen and Koch, Volker}, title = {Life cycle optimized system solutions for densified housing with massive wood technology}, doi = {10.25643/bauhaus-universitaet.98}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-980}, year = {2004}, abstract = {The objective of the joint project 'Life cycle optimised system solutions for densified housing with massive wood technology', short form Basys, was the development and application of an open building system for sustainable construction in a virtual enterprise. Four partners coming from building economy and a university institute developed the building system in a comprehensive planning process. By applying massive wood technology, most requirements of densified housing can be met and individual buildings can be produced on demand.}, subject = {Lebenszyklus }, language = {en} } @inproceedings{PetzoldDonath2004, author = {Petzold, Frank and Donath, Dirk}, title = {The building as a container of information : the starting point for project development and design formulation}, doi = {10.25643/bauhaus-universitaet.184}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1848}, year = {2004}, abstract = {For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. This paper discusses the concept for a modular surveying system (basic concept, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings. ...}, subject = {Architektur}, language = {en} } @article{NeubergFankEkkerlein2004, author = {Neuberg, Frank and Fank, Ernst and Ekkerlein, Christian}, title = {Integrated Life Cycle Simulation and Assessment of Buildings}, doi = {10.25643/bauhaus-universitaet.235}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2351}, year = {2004}, abstract = {Buildings require both for construction and, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. So far available knowledge about resource consumption during an entire life cycle of a building is still quite rare, because various criteria affect each other and/or overlay mutually. In this contribution a model based software concept is presented using an integrated approach for life cycle simulation and assessment of buildings. The essential point of the development consists of connecting an IFC compliant product model of a building via the Internet with data bases for the resource and energy requirement of building materials. Furthermore, numerical simulations allow calculating and minimizing the energy consumption, the resource requirement, the waste streams and also the noxious emissions. In the context of this paper we present the first release of software programs for architects and engineers, which help them to evaluate their design decisions objectively in early planning steps. Additionally the usage of the software is demonstrated by a test case study for a real world building. By applying this software in practice a substantial contribution for saving energy and natural resources can be provided in the sense of sustainable and ecological building design.}, subject = {Produktmodell}, language = {en} } @inproceedings{HaenninenLaine2004, author = {H{\"a}nninen, Reijo and Laine, Tuomas}, title = {Product Models and Life Cycle Data Management in real Projects}, doi = {10.25643/bauhaus-universitaet.152}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1528}, year = {2004}, abstract = {Building project, with many different players involved, requires open and commonly accepted standard for product model description. Product model based design tools support easy comparisons of design alternatives and optimisation of design solution technical quality. This supports client s decision-making and design target comparisons through the whole building project. Use of product models enable these tasks to meet both schedule and cost requirements Olof Granlund is using product models and interoperable software as the main tool in projects. The use and the realised benefits are illustrated by examples from 3 different real projects: University building, where product models were used already in the very early phases by the whole design team. Office building for research organisation, where product models were used in so called self-reporting building system. Headquarters for international company, where product models were widely used for building performance analysis and visualisations in design phase as well as for facilities management system configuration for operational phase.}, subject = {Produktmodell}, language = {en} } @inproceedings{ChangwanHaasCaldas2004, author = {Changwan, Kim and Haas, Carl and Caldas, Carlos}, title = {Spatial data acquisition, integration, and modeling for real-time project life-cycle applications}, doi = {10.25643/bauhaus-universitaet.128}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1280}, year = {2004}, abstract = {Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach.}, subject = {Bauwerk}, language = {en} } @inproceedings{BothKohlerGessmann2004, author = {Both, Petra von and Kohler, Niklaus and Gessmann, Robin}, title = {A virtual life cycle structured platform for building applications}, doi = {10.25643/bauhaus-universitaet.121}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1219}, year = {2004}, abstract = {The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data.}, subject = {Bauwerk}, language = {en} }