@article{AtaollahiOshkourTalebiSeyedShirazietal.,
  author    = {Ataollahi Oshkour, Azim and Talebi, Hossein and Seyed Shirazi, Seyed Farid and Bayat, Mehdi and Yau, Yat Huang and Tarlochan, Faris and Abu Osman, Noor Azuan},
  title     = {Comparison of various functionally graded femoral prostheses by finite element analysis},
  series = {Scientific World Journal},
  journal   = {Scientific World Journal},
  doi       = {10.1155/2014/807621},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31194},
  abstract  = {This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{BaitschHartmann2004,
  author    = {Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Object Oriented Finite Element Analysis for Structural Optimization using p-Elements},
  doi       = {10.25643/bauhaus-universitaet.108},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1089},
  year      = {2004},
  abstract  = {The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@article{BanihaniRabczukAlmomani,
  author    = {Banihani, Suleiman and Rabczuk, Timon and Almomani, Thakir},
  title     = {POD for real-time simulation of hyperelastic soft biological tissue using the point collocation method of finite spheres},
  series = {Mathematical Problems in Engineering},
  journal   = {Mathematical Problems in Engineering},
  doi       = {10.1155/2013/386501},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31203},
  abstract  = {The point collocation method of finite spheres (PCMFS) is used to model the hyperelastic response of soft biological tissue in real time within the framework of virtual surgery simulation. The proper orthogonal decomposition (POD) model order reduction (MOR) technique was used to achieve reduced-order model of the problem, minimizing computational cost. The PCMFS is a physics-based meshfree numerical technique for real-time simulation of surgical procedures where the approximation functions are applied directly on the strong form of the boundary value problem without the need for integration, increasing computational efficiency. Since computational speed has a significant role in simulation of surgical procedures, the proposed technique was able to model realistic nonlinear behavior of organs in real time. Numerical results are shown to demonstrate the effectiveness of the new methodology through a comparison between full and reduced analyses for several nonlinear problems. It is shown that the proposed technique was able to achieve good agreement with the full model; moreover, the computational and data storage costs were significantly reduced.},
  subject      = {Chirurgie},
  language  = {en}
}
@inproceedings{BergerGraeffWeinberg1997,
  author    = {Berger, Hans and Graeff-Weinberg, K.},
  title     = {FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-{\"U}bergangselementen},
  doi       = {10.25643/bauhaus-universitaet.426},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4267},
  year      = {1997},
  abstract  = {Detailuntersuchungen an Tragwerken f{\"u}hren bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. W{\"a}hrend in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gew{\"a}hlt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des {\"U}bergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-{\"U}bergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits {\"u}ber nur eine Stufe erzielen l{\"a}ßt. Diese neu entwickelten sogenannten pNh-Elemente erm{\"o}glichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten f{\"u}r h-Verfeinerung). Das wird durch N st{\"u}ckweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht {\"a}quidistant sein braucht. Dar{\"u}ber hinaus ist es m{\"o}glich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der {\"U}bergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung l{\"a}ßt sich dies besonders g{\"u}nstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit {\"U}bergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten {\"U}bergangselementkonzeptes umfassend demonstriert.},
  subject      = {Tragwerk},
  language  = {de}
}
@inproceedings{BernsteinRichter2003,
  author    = {Bernstein, Swanhild and Richter, Matthias},
  title     = {The Use of Genetic Algorithms in Finite Element Model Identification},
  doi       = {10.25643/bauhaus-universitaet.276},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2769},
  year      = {2003},
  abstract  = {A realistic and reliable model is an important precondition for the simulation of revitalization tasks and the estimation of system properties of existing buildings. Thereby, the main focus lies on the parameter identification, the optimization strategies and the preparation of experiments. As usual structures are modeled by the finite element method. This as well as other techniques are based on idealizations and empiric material properties. Within one theory the parameters of the model should be approximated by gradually performed experiments and their analysis. This approximation method is performed by solving an optimization problem, which is usually non-convex, of high dimension and possesses a non-differentiable objective function. Therefore we use an optimization procedure based on genetic algorithms which was implemented by using the program package SLang...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{BrehmMost2003,
  author    = {Brehm, Maik and Most, Thomas},
  title     = {A Four-Node Plane EAS-Element for Stochastic Nonlinear Materials},
  doi       = {10.25643/bauhaus-universitaet.282},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2825},
  year      = {2003},
  abstract  = {Iso-parametric finite elements with linear shape functions show in general a too stiff element behavior, called locking. By the investigation of structural parts under bending loading the so-called shear locking appears, because these elements can not reproduce pure bending modes. Many studies dealt with the locking problem and a number of methods to avoid the undesirable effects have been developed. Two well known methods are the >Assumed Natural Strain< (ANS) method and the >Enhanced Assumed Strain< (EAS) method. In this study the EAS method is applied to a four-node plane element with four EAS-parameters. The paper will describe the well-known linear formulation, its extension to nonlinear materials and the modeling of material uncertainties with random fields. For nonlinear material behavior the EAS parameters can not be determined directly. Here the problem is solved by using an internal iteration at the element level, which is much more efficient and stable than the determination via a global iteration. To verify the deterministic element behavior the results of common test examples are presented for linear and nonlinear materials. The modeling of material uncertainties is done by point-discretized random fields. To show the applicability of the element for stochastic finite element calculations Latin Hypercube Sampling was applied to investigate the stochastic hardening behavior of a cantilever beam with nonlinear material. The enhanced linear element can be applied as an alternative to higher-order finite elements where more nodes are necessary. The presented element formulation can be used in a similar manner to improve stochastic linear solid elements.},
  subject      = {Nichtlineare Mechanik},
  language  = {en}
}
@inproceedings{BurghardtMeissner2000,
  author    = {Burghardt, Michael and Meißner, Udo F.},
  title     = {Dreidimensionale Finite-Element-Baugrundmodelle f{\"u}r Ingeniuerprobleme},
  doi       = {10.25643/bauhaus-universitaet.575},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5750},
  year      = {2000},
  abstract  = {Bei komplexen Gr{\"u}ndungskonstruktionen sind Planungsfehler durch eine konsistente Modellierung vermeidbar. Manuelle Berechnungsmethoden erm{\"o}glichen im allgemeinen ein dreidimensionales Vorgehen nicht. Numerische Berechnungsmethoden, wie z.B. die Finite-Element-Methode, sind ein optimales Werkzeug zur ganzheitlichen Simulation des Problems. Die f{\"u}r die Finite-Element-Analyse notwendige Diskretisierung komplexer Bau- grundstrukturen ist manuell nicht zu bew{\"a}ltigen. Der vorliegende Beitrag zeigt wie ein Finite-Element-Modell automatisch aus einem geotechnischen Modell unter Ber{\"u}cksichtigung der spezifischen Anforderungen der Baugrund-Tragwerk-Struktur und des Bauablaufes erzeugt werden kann. Hierbei wird die Ber{\"u}cksichtigung der geometrischen und der mechanischen Besonderheiten bei der Netzgenerierung dargestellt.},
  subject      = {Baugrund},
  language  = {de}
}
@inproceedings{DaniunasKomkaWerner2000,
  author    = {Daniunas, A. and Komka, A. and Werner, F.},
  title     = {ANALYSIS AND DETERMINATION OF STRENGTH IN PLASTIC STAGE OF FREE FORM STEEL SHAPES},
  doi       = {10.25643/bauhaus-universitaet.580},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5803},
  year      = {2000},
  abstract  = {The steel structure design codes require to check up the member strength when evaluating plastic deformations. The model of perfectly plastic material is accepted. The strength criteria for simple cross-sections (I section, etc.) of steel members are given in design codes. The analytical strength criteria for steel cross-sections and numerical approaches based on stepwise procedure are investigated in many articles. Another way for checking the carrying capacity of cross-sections is the use of methods that are applied for defining strain-deformed state of elastic perfectly plastic systems. In this paper non-iterative methods are suggested for checking strength of cross-sections. Carrying capacity of cross section is verified according to extremum principle of plastic fail under monotonically loading and the strain-deformed state of cross-section is defined according to extremum energy principals of elastic potential of residual stresses and complementary work of residual displacements. The mathematical expressions of these principals for discrete cross-section are formulated as problems of convex mathematical programming. The cross-section of steel member using finite element method is divided into free form plane elements. The constant distribution of stresses along the finite element is accepted. The relationships of finite elements for static formulation of the problem are formed so, that kinematics formulation relationships could be obtained in a formal way using the theory of duality. Numerical examples of determination of cross-section strength, composition of interactive curves and composition of moment-curvature curves for different axial force levels are presented.},
  subject      = {Stahlkonstruktion},
  language  = {en}
}
@inproceedings{DuckeEcksteinMontag2000,
  author    = {Ducke, M. and Eckstein, U. and Montag, U.},
  title     = {Die Eisenbahnbr{\"u}cken des Lehrter Bahnhofs in Berlin - Ein ganzheitliches FE-Berechnungskonzept},
  doi       = {10.25643/bauhaus-universitaet.581},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5812},
  year      = {2000},
  abstract  = {Der Komplexit{\"a}t moderner Br{\"u}ckenbauwerke scheinen die verwendeten Berechungsmodelle oft nicht angemessen. Tragwerksberechnungen basieren in vielen F{\"a}llen noch auf der Vorgehensweise, das Br{\"u}ckenbauwerk in Einzelbauteile zu zerlegen und mit unterschiedlichen Teilmodellen zu behandeln. Das erscheint, auch vor dem Hintergrund st{\"a}ndig wachsender Rechnerleistung, nicht mehr zeitgem{\"a}ß. Dies gilt zum Beispiel auch f{\"u}r die g{\"a}ngige Praxis, fl{\"a}chenhafte Br{\"u}cken{\"u}berbauten mit Balkenmodellen zu berechnen. Der vorliegende Beitrag stellt ein ganzheitliches Berech-nungskonzept vor, welches auf der Basis eines einzigen FE-Modells die Berechnung des Gesamtbauwerks erlaubt. Damit wird f{\"u}r alle Bauteile neben der Zustandsgr{\"o}ßenberechnung auch die Bemessung von Stahl- und Spannbetonbauteilen bis hin zu Nachweisen wie zur Beschr{\"a}nkung der Rissbreite gef{\"u}hrt. Die Anwendung dieses Berechnungskonzeptes wird am Beispiel der Eisenbahn{\"u}berf{\"u}hrung des neuen Lehrter Bahn-hofs in Berlin gezeigt. Das verwendete FE-Modell umfasst Baugrund, Fundamente, Stahl- bzw. Gußstahlunterkonstruktion sowie den Stahl- bzw. Spannbeton{\"u}berbau. Besonderheiten sind unter anderem die Modellierung des plattenbalkenartigen {\"U}berbaus durch exzentrische, vorspannbare Schalenelemente und das getrennte Vorhalten von tragwerks- und lastbezogenen Eingabefiles. Damit gelingt die sequentielle Erfassung unterschiedlicher Bettungsmoduli zur Simulation statischer und dynamischer Beanspruchungen, die Ber{\"u}cksichtigung des Anspannens und der Interaktion zwischen vorgespannten Stahlverb{\"a}nden zur Aufnahme von Horizontallasten sowie die Ber{\"u}cksichtigung unterschiedlicher statischer Systeme bei der Herstellung des Spannbeton{\"u}berbaus.},
  subject      = {Berlin},
  language  = {de}
}
@inproceedings{EbertBucher2000,
  author    = {Ebert, Matthias and Bucher, Christian},
  title     = {Modelling of changing of dynamic and static parameters of damaged R/C},
  doi       = {10.25643/bauhaus-universitaet.582},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5825},
  year      = {2000},
  abstract  = {Dynamic testing for damage assessment as non-destructive method has attracted growing in-terest for systematic inspections and maintenance of civil engineering structures. In this con-text the paper presents the Stochastic Finite Element (SFE) Modeling of the static and dy-namic results of own four point bending experiments with R/C beams. The beams are dam-aged by an increasing load. Between the load levels the dynamic properties are determined. Calculated stiffness loss factors for the displacements and the natural frequencies show differ-ent histories. A FE Model for the beams is developed with a discrete crack formulation. Cor-related random fields are used for structural parameters stiffness and tension strength. The idea is to simulate different crack evolutions. The beams have the same design parameters, but because of the stochastic material properties their undamaged state isn't yet the same. As the structure is loaded a stochastic first crack occurs on the weakest place of the structure. The further crack evolution is also stochastic. These is a great advantage compared with de-terministic formulations. To reduce the computational effort of the Monte Carlo simulation of this nonlinear problem the Latin-Hypercube sampling technique is applied. From the results functions of mean value and standard deviation of displacements and frequencies are calcu-lated. Compared with the experimental results some qualitative phenomena are good de-scribed by the model. Differences occurs especially in the dynamic behavior of the higher load levels. Aim of the investigations is to assess the possibilities of dynamic testing under consideration of effects from stochastic material properties},
  subject      = {Stahlbetonbauteil},
  language  = {en}
}