@inproceedings{HaefnerKoenke, author = {H{\"a}fner, Stefan and K{\"o}nke, Carsten}, title = {DAMAGE SIMULATION OF HETEROGENEOUS SOLIDS BY NONLOCAL FORMULATIONS ON ORTHOGONAL GRIDS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2963}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29638}, pages = {15}, abstract = {The present paper is part of a comprehensive approach of grid-based modelling. This approach includes geometrical modelling by pixel or voxel models, advanced multiphase B-spline finite elements of variable order and fast iterative solver methods based on the multigrid method. So far, we have only presented these grid-based methods in connection with linear elastic analysis of heterogeneous materials. Damage simulation demands further considerations. The direct stress solution of standard bilinear finite elements is severly defective, especially along material interfaces. Besides achieving objective constitutive modelling, various nonlocal formulations are applied to improve the stress solution. Such a corrective data processing can either refer to input data in terms of Young's modulus or to the attained finite element stress solution, as well as to a combination of both. A damage-controlled sequentially linear analysis is applied in connection with an isotropic damage law. Essentially by a high resolution of the heterogeneous solid, local isotropic damage on the material subscale allows to simulate complex damage topologies such as cracks. Therefore anisotropic degradation of a material sample can be simulated. Based on an effectively secantial global stiffness the analysis is numerically stable. The iteration step size is controlled for an adequate simulation of the damage path. This requires many steps, but in the iterative solution process each new step starts with the solution of the prior step. Therefore this method is quite effective. The present paper provides an introduction of the proposed concept for a stable simulation of damage in heterogeneous solids.}, subject = {Architektur }, language = {en} } @inproceedings{HaefnerKoenke, author = {H{\"a}fner, Stefan and K{\"o}nke, Carsten}, title = {MULTIGRID PRECONDITIONED CONJUGATE GRADIENT METHOD IN THE MECHANICAL ANALYSIS OF HETEROGENEOUS SOLIDS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2962}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29626}, pages = {29}, abstract = {A fast solver method called the multigrid preconditioned conjugate gradient method is proposed for the mechanical analysis of heterogeneous materials on the mesoscale. Even small samples of a heterogeneous material such as concrete show a complex geometry of different phases. These materials can be modelled by projection onto a uniform, orthogonal grid of elements. As one major problem the possible resolution of the concrete specimen is generally restricted due to (a) computation times and even more critical (b) memory demand. Iterative solvers can be based on a local element-based formulation while orthogonal grids consist of geometrical identical elements. The element-based formulation is short and transparent, and therefore efficient in implementation. A variation of the material properties in elements or integration points is possible. The multigrid method is a fast iterative solver method, where ideally the computational effort only increases linear with problem size. This is an optimal property which is almost reached in the implementation presented here. In fact no other method is known which scales better than linear. Therefore the multigrid method gains in importance the larger the problem becomes. But for heterogeneous models with very large ratios of Young's moduli the multigrid method considerably slows down by a constant factor. Such large ratios occur in certain heterogeneous solids, as well as in the damage analysis of solids. As solution to this problem the multigrid preconditioned conjugate gradient method is proposed. A benchmark highlights the multigrid preconditioned conjugate gradient method as the method of choice for very large ratio's of Young's modulus. A proposed modified multigrid cycle shows good results, in the application as stand-alone solver or as preconditioner.}, subject = {Architektur }, language = {en} } @inproceedings{HaefnerVogelKoenke, author = {H{\"a}fner, Stefan and Vogel, Frank and K{\"o}nke, Carsten}, title = {FINITE ELEMENT ANALYSIS OF TORSION FOR ARBITRARY CROSS-SECTIONS}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28483}, pages = {11}, abstract = {The present article proposes an alternative way to compute the torsional stiffness based on three-dimensional continuum mechanics instead of applying a specific theory of torsion. A thin, representative beam slice is discretized by solid finite elements. Adequate boundary conditions and coupling conditions are integrated into the numerical model to obtain a proper answer on the torsion behaviour, thus on shear center, shear stress and torsional stiffness. This finite element approach only includes general assumptions of beam torsion which are independent of cross-section geometry. These assumptions essentially are: no in-plane deformation, constant torsion and free warping. Thus it is possible to achieve numerical solutions of high accuracy for arbitrary cross-sections. Due to the direct link to three-dimensional continuum mechanics, it is possible to extend the range of torsion analysis to sections which are composed of different materials or even to heterogeneous beams on a high scale of resolution. A brief study follows to validate the implementation and results are compared to analytical solutions.}, subject = {Angewandte Informatik}, language = {en} } @article{KoenkeEckardtHaefneretal., author = {K{\"o}nke, Carsten and Eckardt, Stefan and H{\"a}fner, Stefan and Luther, Torsten and Unger, J{\"o}rg F.}, title = {Multiscale simulation methods in damage prediction of brittle and ductile materials}, series = {International Journal for Multiscale Computational Engineering}, journal = {International Journal for Multiscale Computational Engineering}, pages = {17 -- 36}, abstract = {Multiscale simulation methods in damage prediction of brittle and ductile materials}, subject = {Angewandte Mathematik}, language = {en} } @article{LahmerKoenkeBettzieche, author = {Lahmer, Tom and K{\"o}nke, Carsten and Bettzieche, Volker}, title = {Optimale Positionierung von Messeinrichtungen an Staumauern zur Bauwerks{\"u}berwachung}, series = {WASSERWIRTSCHAFT}, journal = {WASSERWIRTSCHAFT}, pages = {16 -- 16}, abstract = {Optimale Positionierung von Messeinrichtungen an Staumauern zur Bauwerks{\"u}berwachung}, subject = {Angewandte Mathematik}, language = {de} } @article{LahmerKoenkeBettzieche, author = {Lahmer, Tom and K{\"o}nke, Carsten and Bettzieche, Volker}, title = {Optimal positioning of sensors for the monitoring of water dams}, series = {WASSERWIRTSCHAFT}, journal = {WASSERWIRTSCHAFT}, pages = {16 -- 19}, abstract = {Optimal positioning of sensors for the monitoring of water dams}, subject = {Angewandte Mathematik}, language = {de} } @article{LahmerNguyenTuanKoenkeetal., author = {Lahmer, Tom and Nguyen-Tuan, Long and K{\"o}nke, Carsten and Bettzieche, Volker}, title = {Thermo-hydro-mechanische 3-D-Simulation von Staumauern-Modellierung und Validierung}, series = {WASSERWIRTSCHAFT}, journal = {WASSERWIRTSCHAFT}, pages = {27 -- 30}, abstract = {Thermo-hydro-mechanische 3-D-Simulation von Staumauern-Modellierung und Validierung}, subject = {Angewandte Mathematik}, language = {de} } @article{LutherKoenke, author = {Luther, Torsten and K{\"o}nke, Carsten}, title = {Coupled cohesive zone representations from 3D quasicontinuum simulation on aluminum grain boundaries}, series = {International Journal for Multiscale Computational Engineering}, journal = {International Journal for Multiscale Computational Engineering}, abstract = {Coupled cohesive zone representations from 3D quasicontinuum simulation on aluminum grain boundaries}, subject = {Angewandte Mathematik}, language = {en} } @inproceedings{LutherKoenke, author = {Luther, Torsten and K{\"o}nke, Carsten}, title = {INVESTIGATION OF CRACK GROWTH IN POLYCRYSTALLINE MESOSTRUCTURES}, editor = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten}, organization = {Bauhaus-Universit{\"a}t Weimar}, doi = {10.25643/bauhaus-universitaet.2988}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29886}, pages = {11}, abstract = {The design and application of high performance materials demands extensive knowledge of the materials damage behavior, which significantly depends on the meso- and microstructural complexity. Numerical simulations of crack growth on multiple length scales are promising tools to understand the damage phenomena in complex materials. In polycrystalline materials it has been observed that the grain boundary decohesion is one important mechanism that leads to micro crack initiation. Following this observation the paper presents a polycrystal mesoscale model consisting of grains with orthotropic material behavior and cohesive interfaces along grain boundaries, which is able to reproduce the crack initiation and propagation along grain boundaries in polycrystalline materials. With respect to the importance of modeling the geometry of the grain structure an advanced Voronoi algorithm is proposed to generate realistic polycrystalline material structures based on measured grain size distribution. The polycrystal model is applied to investigate the crack initiation and propagation in statically loaded representative volume elements of aluminum on the mesoscale without the necessity of initial damage definition. Future research work is planned to include the mesoscale model into a multiscale model for the damage analysis in polycrystalline materials.}, subject = {Architektur }, language = {en} } @article{LutherKoenke, author = {Luther, Torsten and K{\"o}nke, Carsten}, title = {Polycrystal models for the analysis of intergranular crack growth in metallic materials}, series = {Engineering Fracture Mechanics}, journal = {Engineering Fracture Mechanics}, pages = {2332 -- 2343}, abstract = {Polycrystal models for the analysis of intergranular crack growth in metallic materials}, subject = {Angewandte Mathematik}, language = {en} }