@inproceedings{HauschildHuebler1997, author = {Hauschild, Thomas and H{\"u}bler, Reinhard}, title = {Entwicklung eines verteilbaren und kooperativ nutzbaren objektorientierten CAAD-Produktmodellierkerns}, doi = {10.25643/bauhaus-universitaet.447}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4475}, year = {1997}, abstract = {Der Fokus des Projektes liegt auf einer besseren Unterst{\"u}tzung der kooperativen Aspekte im Bauwerksentwurf und der Anwendung von ComponentWare-Techniken in der Architektur des Entwurfssystems. Es muß festgestellt werden, daß die Kooperation der Beteiligten im Entwurfsprozeß von Bauwerken durch die heute praktizierten Datenaustauschverfahren nicht oder nur unbefriedigend unterst{\"u}tzt wird und das keine L{\"o}sung dieses Problems durch die Weiterentwicklung von filebasierten Datenaustauschformaten zu erwarten ist. Im Rahmen des Projektes wird mit einer CORBA-Umgebung f{\"u}r Smalltalk-80 ein verteilbares Objektsystem realisiert. Als Architektur des Systems wurde eine hybride Herangehensweise gew{\"a}hlt, bei der allgemeine Informationen auf einem zentralen Server verwaltet werden und die eigentlichen Projektinformationen bei Bedarf repliziert werden. Wie allgemein in GroupWare - orientierten Systemen notwendig, m{\"u}ssen effektive Mechanismen der Nebenl{\"a}ufigkeitskontrolle und zur Sperrung bestimmter Modellbereiche realisiert werden. Wichtig ist f{\"u}r kooperative Entwurfssysteme die Systemunterst{\"u}tzung der Beseitigung der Folgen von kollidierenden Entwurfsintensionen durch die Bearbeiter. Dazu werden unter anderem Remote-Pointer-Mechanismen realisiert. In Abh{\"a}ngigkeit von der Rolle eines Bearbeiters werden diesem Sichten auf des Objektmodell (Partialmodelle) zugeordnet. Es werden Mechanismen zur Autorisierung des Zugriffs auf Partialmodelle implementiert, zu diesem Zweck erfolgt eine Nutzerauthentifizierung. Beziehungen zwischen Partialmodellen werden durch eine spezielle Relation im Objektsystem abgebildet. Die Konzeption des Objektsystems lehnt sich an die PREPLAN-Philosophie an. Das impliziert die Unterst{\"u}tzung von Entwurfshandlungen sowohl in Bottom-Up- als auch in Top-Down - Richtung. Benutzer k{\"o}nnen das Objektsystem um eigene Klassen erweitern bzw. existierende Klassen modifizieren und Attribute mit Defaultwerten belegen, um das System inkrementell mit Dom{\"a}nenwissen anreichern zu k{\"o}nnen. Von großer Bedeutung f{\"u}r kooperative Entwurfssysteme sind eine Versionsverwaltung und die Bereitstellung von Undo - und Redo - Mechanismen. Es ist m{\"o}glich, multimediale Daten im Objektmodell abzulegen und diese in Abh{\"a}ngigkeit von ihrem Format wiederzugeben bzw. zu bearbeiten. Das beschriebene System befindet sich derzeit in der Implementierung.}, subject = {Bauwerk}, language = {de} } @inproceedings{MahdaviMathewHartkopf1997, author = {Mahdavi, A. and Mathew, P. and Hartkopf, V.}, title = {Real-time Coupling of Multi-Domain Representational and Analytical Building Object Models via Homology-based Mapping}, doi = {10.25643/bauhaus-universitaet.446}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4461}, year = {1997}, abstract = {Ideally, multiple computational building evaluation routines (particularly simulation tools) should be coupled in real-time to the representational design model to provide timely performance feed-back to the system user. In this paper we demonstrate how this can be achieved effectively and conveniently via homology-based mapping. We consider two models as homologous if they entail isomorphic topological information. If the general design representation (i.e., a shared object model) is generated in a manner so as to include both the topological building information and pointers to the semantic information base, it can be used to directly derive the domain representations (>enriched< object models with detailed configurational information and filtered semantic data) needed for evaluation purposes. As a proof of concept, we demonstrate a computational design environment that dynamically links an object-oriented space-based design model, with structurally homologous object models of various simulation routines.}, subject = {Geb{\"a}ude}, language = {en} } @inproceedings{SariyildizSchwenck1997, author = {Sariyildiz, Sevil and Schwenck, M.}, title = {An Integrated Software Environment for the Architectural Design Process}, doi = {10.25643/bauhaus-universitaet.444}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4447}, year = {1997}, abstract = {The general motivation of this research is to develop software to support the handling of the increased complexity of architectural design. In this paper we describe a system providing general support during the whole process. Instead of only developing design tools we are also addressing the problem of the operating environment of these tools. We conclude that design tools have to be integrated in an open, modular, distributed, user friendly and efficient environment. Two major fields have to be addressed - the development of design tools and the realisation of an integrated system as their operation environment. We will briefly focus on the latter by discussing known technologies in the field of information technology and other design disciplines that can be used to realise such an environment. Regarding the first subject we have to state the need of a detailed tool specification. As a solution we suggest a strategy where the tool functions are specified on the basis of a transformation, where a hierarchical process model is mapped into specifications of different design tools realising appropriate support for all sub-processes of architectural design. Using this strategy the main steps to develop such a support system are: implementation of a framework as basis for the integrated design system decision whether the tool specification are already implemented in available tools in this case these tools can be integrated using known methods for tool coupling otherwise new design tools have to be developed according to the framework}, subject = {Architektur}, language = {en} } @inproceedings{ChristovPetrova1997, author = {Christov, Christo T. and Petrova, Lyllia B.}, title = {Computer-Aided Static Analysis of Complex Prismatic Orthotropic Shell Structures by the Analytical Finite Strip Method}, doi = {10.25643/bauhaus-universitaet.435}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4358}, year = {1997}, abstract = {The paper describes a development of the analytical finite strip method (FSM) in displacements for linear elastic static analysis of simply supported at their transverse ends complex orthotropic prismatic shell structures with arbitrary open or closed deformable contour of the cross-section under general external loads. A number of bridge top structures, some roof structures and others are related to the studied class. By longitudinal sections the prismatic thin-walled structure is discretized to a limited number of plane straight strips which are connected continuously at their longitudinal ends to linear joints. As basic unknowns are assumed the three displacements of points from the joint lines and the rotation to these lines. In longitudinal direction of the strips the unknown quantities and external loads are presented by single Fourier series. In transverse direction of each strips the unknown values are expressed by hyperbolic functions presenting an exact solution of the corresponding differential equations of the plane straight strip. The basic equations and relations for the membrane state, for the bending state and for the total state of the finite strip are obtained. The rigidity matrix of the strip in the local and global co-ordinate systems is derived. The basic relations of the structure are given and the general stages of the analytical FSM are traced. For long structures FSM is more efficient than the classic finite element method (FEM), since the problem dimension is reduced by one and the number of unknowns decreases. In comparison with the semi-analytical FSM, the analytical FSM leads to a practically precise solution, especially for wider strips, and provides compatibility of the displacements and internal forces along the longitudinal linear joints.}, subject = {Tragwerk}, language = {en} } @inproceedings{Kovalev1997, author = {Kovalev, M.}, title = {CAD and Discrete Optimization}, doi = {10.25643/bauhaus-universitaet.421}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4214}, year = {1997}, abstract = {Review of Discrete Optimization Techniques for CAD Discrete optimization in the structure design Morphological method The alternative graph approach Convex discrete optimization without objective function Matroidal Decomposition in design Decomposition of layered matrices Discrete Optimization in Designing Packing problem Optimal arrangement of rectangles and shortest paths in L1-metrics Partition problems Discrete optimization in computational geometry and computer graphics Maxima of a point set on the plane Triangulation One of the main problems in computer graphics is removing hidden lines and surfaces}, subject = {CAD}, language = {en} } @inproceedings{VossCoulonGebhardt1997, author = {Voß, A. and Coulon, Carl-Helmut and Gebhardt, F.}, title = {KI-Methoden beim Entwurf komplexer Geb{\"a}ude}, doi = {10.25643/bauhaus-universitaet.420}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4207}, year = {1997}, abstract = {Anhand von Ergebnissen aus dem FABEL-Projekt wird gezeigt, welche Beitr{\"a}ge Methoden der K{\"u}nstlichen Intelligenz, insbesondere der Wissensverarbeitung beim Entwurf komplexer Geb{\"a}ude leisten k{\"o}nnen. Exemplarisch werden spezialisierte wissensintensive Methoden, und allgemeine fallbasierte Methoden zum Retrieval und zur Wiederverwendung fr{\"u}herer Entw{\"u}rfe vorgestellt. Es werden Fragen der Integration von Wissen, F{\"a}llen und Daten diskutiert. Der Prototyp des FABEL-Projekts verwendet die Metapher der virtuellen Baustelle, um die verschiedenen Methoden als Planungswerkzeuge in einem CAD-System integriert anzubieten. Ein Planungsmodell dient der zus{\"a}tzlichen Orientierung des Planers. Die Ergebnisse sind interessant f{\"u}r den Entwurf komplexer Unikate, d{\"u}rften aber auch als Zusatz zu elektronisch angebotenen Katalogen relevant sein.}, subject = {Bauentwurf}, language = {de} } @inproceedings{ThurowDonathPetzold2003, author = {Thurow, Torsten and Donath, Dirk and Petzold, Frank}, title = {Vision eines mitwachsenden Geometriemodells f{\"u}r die computergest{\"u}tzte Bauaufnahme}, doi = {10.25643/bauhaus-universitaet.365}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3655}, year = {2003}, abstract = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells f{\"u}r das computergest{\"u}tzte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale {\"U}bersicht zu verlieren oder entsprechende r{\"a}umliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterst{\"u}tzt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberfl{\"a}chen}, subject = {Bauaufnahme}, language = {de} } @inproceedings{SampaioHenriques2003, author = {Sampaio, Alcinia Zita and Henriques, Pedro}, title = {Interactive project planning in construction based on virtual reality technology}, doi = {10.25643/bauhaus-universitaet.358}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3588}, year = {2003}, abstract = {This paper describes a didactic application that is part of a research project whose main aim is to develop a computer-aided system which will assist design and construction processes. It is based on the visual simulation of construction activities. Geometric modeling and virtual reality techniques are used in the visualization of the design process and to define user-friendly interfaces in order to access construction information, which could prove useful to Civil Engineering professionals. As a first step, was developed a prototype that serves as a didactic tool for Civil Engineering students of disciplines concerned with building construction. The construction of a double brick wall is the case studied. The wall is defined as a three dimensional model formed with the several components needed to edify it. Using the wall's virtual model it is possible to show, in an interactive way, the sequence of the construction process and observe from any point of view the configurations in detail of the building components. This is then a didactic tool application in construction processes domain of great interest to Civil Engineering students.}, subject = {Bauwesen}, language = {en} } @inproceedings{Sampaio2003, author = {Sampaio, Alcinia Zita}, title = {Definition of a bridge deck geometrical modelling process to automate design graphical representations}, doi = {10.25643/bauhaus-universitaet.357}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3575}, year = {2003}, abstract = {The construction of a new building interferes with the existent environment. A careful aesthetic study must be made at an early stage in the design and the visualization of a three-dimensional (3D) model of the structure is the best way to analyse it. As some structures presents a complex shape is difficult to execute a 3D model as well as the specific drawings. Using traditional graphical systems, the execution of deck specific drawings is extremely time consuming and the 3D deck model gives an approximation only of the exterior shape of the deck. The modelling scheme proposed here allows the automation of the geometric design phases related to the deck bridge element using as a means of integration a geometric database representative of the real deck shape. This concept was implemented in a computer program. This application is an important support in the process design namely at the conceptual and graphical stages. The computer application provides an important tool to the bridge designer particularly at the conceptual stage, as it allows aesthetic and structural evaluation of the bridge at an early stage in the design. The geometric modelling process and graphical results of a case study are presented.}, subject = {Br{\"u}ckenbau}, language = {en} } @inproceedings{RueppelMeissnerGreb2003, author = {R{\"u}ppel, Uwe and Meißner, Udo F. and Greb, Steffen}, title = {Vernetzte Bauprozesssteuerung auf der Basis bauteilspezifischer Prozessmuster f{\"u}r geotechnische Konstruktionselemente}, doi = {10.25643/bauhaus-universitaet.355}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3556}, year = {2003}, abstract = {Der Beitrag basiert auf den Ans{\"a}tzen und Ergebnissen des Forschungsprojekts >Prozessorientierte Vernetzung von Ingenieurplanungen am Beispiel der Geotechnik<, des DFG-Schwerpunktprogramms 1103 >Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau<. Ziel ist die Entwicklung einer netzwerkbasierten Kooperationsplattform zur Unterst{\"u}tzung von Ingenieurplanungen. Methodische Grundlagen hierf{\"u}r stellen die Petri-Netze mit individuellen Marken in Verbindung mit einer semantischen Informationsbewertung dar. Der Beitrag zeigt an einem Beispiel die grundlegenden M{\"o}glichkeiten der Petri-Netze auf und stellt die Steuerung der Planungsprozesse aufgrund von Metainformationen dar. Dar{\"u}ber hinaus wird der Ansatz verfolgt, auf der Basis bauteilorientierter Prozessmuster f{\"u}r geotechnische Konstruktionselemente den ver{\"a}nderlichen Prozessablauf zu erfassen. Abschließend wird ein Weg zur Implementierung gezeigt.}, subject = {Geotechnik}, language = {de} }