@inproceedings{Molkenthin2000,
  author    = {Molkenthin, Frank},
  title     = {WWW based Simulation Systems and Project Platforms in Civil Engineering},
  doi       = {10.25643/bauhaus-universitaet.597},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5972},
  year      = {2000},
  abstract  = {The availability of the WWW technology and the introduction of the Internet as basic resource like water, electricity or gas changes dramatically normal live, business and of course civil engineering. New technologies enable innovative technical solutions and offer new potential for improvements towards support of humans nature appropriate ways of working. This demands a new culture of work and collaboration. To contribute to theses challenges is a matter the discipline 'Bauinformatik' by supporting related research, development, education and training in civil engineering. This contribution to the IKM Conference 2000 in Weimar sketches selected research and education activities of the institutes of the authors on the topics of WWW based simulation systems (example WEASEL) and of WWW based project platforms (projects MorWin and TaiGer as well as an European education experiment). Both topics supports the collaboration by new ways of tele cooperation in international, heterogeneous and interdisciplinary engineering. Demonstration from this developments and projects will be used to illustrate the dimension of changes in civil engineering in due to modern ICT.},
  subject      = {Bauwesen},
  language  = {en}
}
@inproceedings{KuwataShinozaki2000,
  author    = {Kuwata, Hitoshi and Shinozaki, M.},
  title     = {Web-based System for Visualization of Distribution Patterns of Solar Energy and Sky Factor on Outdoor Open Spaces},
  doi       = {10.25643/bauhaus-universitaet.602},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6026},
  year      = {2000},
  abstract  = {This study aims at constructing the simulation system of distribution patterns of solar irradiance, sunshine duration and sky factor with the user-friendly interface and sharing this system with users on the Internet. The characteristics of this simulation system are as follows: (1) Web-based user interface, (2) Accessible system through the Internet and (3) Sunlight and skylight simulation based on physically accurate equations with considering various sky conditions and the reflection from the surface of objects. As a case study, impact of the development plans are analyzed and evaluated using this system. Solar irradiance, sunshine duration and sky factor are calculated at the surface of the buildings and open spaces every 10 minutes from 8 to 16 on the winter solstice. The values of these indices are expressed as the ratio to those calculated under the condition with no buildings. In conclusion, this web-based simulation system can be useful for visualizing the sunlight and skylight conditions on outdoor open spaces and the surface of the buildings to evaluate development plans objectively. Users can make access to the system from almost all of the computers connected with the Internet and modify parameters by themselves to get desirable results. Further improvement of the user interface is necessary using more advanced technology of CGI, Java and JavaScript.},
  subject      = {Sonnenstrahlung},
  language  = {en}
}
@inproceedings{ThurowDonathPetzold2003,
  author    = {Thurow, Torsten and Donath, Dirk and Petzold, Frank},
  title     = {Vision eines mitwachsenden Geometriemodells f{\"u}r die computergest{\"u}tzte Bauaufnahme},
  doi       = {10.25643/bauhaus-universitaet.365},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3655},
  year      = {2003},
  abstract  = {Die digitale Unterst{\"u}tzung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakult{\"a}t Architektur an der Bauhaus-Universit{\"a}t Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen f{\"u}r die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen f{\"u}r eine fachlich orientierte Planungsunterst{\"u}tzung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells f{\"u}r das computergest{\"u}tzte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale {\"U}bersicht zu verlieren oder entsprechende r{\"a}umliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterst{\"u}tzt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberfl{\"a}chen},
  subject      = {Bauaufnahme},
  language  = {de}
}
@inproceedings{BoukampAkinci2004,
  author    = {Boukamp, Frank and Akinci, Burcu},
  title     = {Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications},
  doi       = {10.25643/bauhaus-universitaet.131},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1315},
  year      = {2004},
  abstract  = {This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system.},
  subject      = {Bauwerk},
  language  = {en}
}
@inproceedings{Vasilkov2003,
  author    = {Vasilkov, Dmitry M.},
  title     = {Surface design based upon a combined mesh},
  doi       = {10.25643/bauhaus-universitaet.367},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3671},
  year      = {2003},
  abstract  = {The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points.},
  subject      = {Oberfl{\"a}che},
  language  = {en}
}
@inproceedings{AldaCremersBilek2004,
  author    = {Alda, Sascha and Cremers, Armin B. and Bilek, Jochen},
  title     = {Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures},
  doi       = {10.25643/bauhaus-universitaet.148},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1481},
  year      = {2004},
  abstract  = {Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent-peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{HuebnerWalhornKoelke2003,
  author    = {H{\"u}bner, Bj{\"o}rn and Walhorn, Elmar and K{\"o}lke, Andreas},
  title     = {Simultane L{\"o}sung gekoppelter Struktur-Fluid-Systeme},
  doi       = {10.25643/bauhaus-universitaet.311},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3114},
  year      = {2003},
  abstract  = {Ein simultanes L{\"o}sungsverfahren f{\"u}r Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizit{\"a}tstheorie in total Lagrangescher Formulierung. Die Str{\"o}mung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberfl{\"a}chen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode f{\"u}hrt zu einem konsistenten Berechnungsmodell f{\"u}r das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung {\"a}ndern k{\"o}nnen, erlaubt die Methode eine nat{\"u}rliche Beschreibung des infolge der Strukturbewegung zeitver{\"a}nderlichen Str{\"o}mungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten f{\"u}r die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgew{\"a}hlte Anwendungsbeispiele zeigen die Leistungsf{\"a}higkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen L{\"o}sungsverfahrens.},
  subject      = {Bauwerk},
  language  = {de}
}
@inproceedings{LehnerHartmann2004,
  author    = {Lehner, Karlheinz and Hartmann, Dietrich},
  title     = {Scenarios for the deployment of distributed engineering applications},
  doi       = {10.25643/bauhaus-universitaet.147},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1476},
  year      = {2004},
  abstract  = {Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{Phirsof2000,
  author    = {Phirsof, Alexander},
  title     = {Research of special models describing technological processes},
  doi       = {10.25643/bauhaus-universitaet.607},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6072},
  year      = {2000},
  abstract  = {The technological processes, schedules, parallel algorithms, etc., having some technological limitations and exacting increases of efficiency of their execution can be described through digraphs, on which the appropriate optimization problem (construction of optimal scheduling of tops of digraph) can be solved. The problems, researched in the given operation, have a generally following statement: The problem 1: Under the given graph G and option value h to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, l). The problem 2: Under the given graph G and option value l to construct parallel scheduling of tops of digraph of minimum width. Let's designate the problem S(G, l, h). The problem 3: Under the given graph G, option value h and periods of execution of operations di, i=1, …, n to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, di, l). The problems 1,2,3 in a case when h-arbitrary have exponential complexity. In operation the method of solution of the problem S(T, h, di, l) is offered on the basis of choice of tops having greatest weight. The approach to solution of the problem S(G, 3, l) is offered, where G the graph satisfying property : S[i] =S [i], i=1, …, l. For obtaining a rating of width of scheduling on an available estimator of length, we offer to use iterative algorithm of polynomial complexity, on which each step the current value of width of scheduling is set, which is used for specification of length of scheduling.},
  subject      = {Ablaufplanung},
  language  = {en}
}
@inproceedings{WillenbacherHuebler2000,
  author    = {Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {Relationen zwischen Dom{\"a}nenmodellen Ansatz zur Schaffung einer integrierenden computergest{\"u}tzten Bauplanungsumgebung},
  doi       = {10.25643/bauhaus-universitaet.617},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6178},
  year      = {2000},
  abstract  = {Die zunehmend erforderliche Kooperation verschiedener Beteiligter unterschiedlicher Fachbereiche und der Einsatz hochspezialisierter Fachapplikationen in heterogenen Systemumgebungen unterstreichen die Bedeutung und Notwendigkeit neuer Konzepte und M{\"o}glichkeiten zur Schaffung einer computergest{\"u}tzten Integrationsebene. Ziel einer computergest{\"u}tzten Integrationsebene ist die Verbesserung der Kooperation und Kommunikation unter den Beteiligten. Grundlage daf{\"u}r ist die Etablierung eines effizienten und fehlerfreien Daten- und Informationsaustausches zwischen den verschiedenen Fachplanern und -applikationen. Die Basis f{\"u}r die Datenintegrationsebene bildet ein digitales Bauwerksmodell im Sinne eines >virtuellen Bauwerks<, welches alle relevanten Daten und Informationen {\"u}ber ein zu planendes oder real existierendes Bauwerk zur Verf{\"u}gung stellt. Bei der Verwirklichung einer Bauwerksmodell-orientierten Datenintegrationsebene und deren Modellverwaltung erweist sich speziell die Definition des Bauwerksmodells also die Spezifikation der relevanten auszutauschenden Daten als {\"a}ußerst komplex. Der hier vorzustellende Relationen-orientierte Ansatz, d.h. die Realisierung des Daten- und Informationsaustauschs mittels definierter Relationen und Beziehungen zwischen dynamisch modifizierbaren Dom{\"a}nenmodellen, bietet Ans{\"a}tze zur: * Verringerung und Beherrschung der Komplexit{\"a}t des Bauwerksmodells (Teilmodellbildung) * Realisierung eines effizienten Datenaustauschs (Relationenmanagement) Somit stellt der Relationenorientierte Ansatz einen ad{\"a}quaten L{\"o}sungsweg zur Modellierung eines digitalen Bauwerksmodells als Datenintegrationsebene f{\"u}r den Lebenszyklus eines Bauwerkes dar.},
  subject      = {Bauwesen},
  language  = {de}
}