@inproceedings{YahiaouiHensenSoethout2004,
  author    = {Yahiaoui, Azzedine and Hensen, Jan and Soethout, Luc},
  title     = {Developing CORBA-based distributed control and building performance environments by run-time coupling},
  doi       = {10.25643/bauhaus-universitaet.134},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1347},
  year      = {2004},
  abstract  = {Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{WenderDonathPetzold2004,
  author    = {Wender, Katrin and Donath, Dirk and Petzold, Frank},
  title     = {Preparation and provision of building information for planning within existing built contexts},
  doi       = {10.25643/bauhaus-universitaet.182},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1829},
  year      = {2004},
  abstract  = {A prerequisite for planning within existing built contexts is precise information regarding the building substance, its construction and materials, possible damages and any modifications and additions that may have occurred during its lifetime. Using the information collected in a building survey the user should be able to "explore" the building in virtual form, as well as to assess the information contained with regard to a specific planning aspect. The functionality provided by an information module should cover several levels of information provision ranging from 'simple retrieval' of relevant information to the analysis and assessment of stored information with regard to particular question sets. Through the provision of basic functionality at an elementary level and the ability to extend this using plug-ins, the system concept of an open extendable system is upheld. Using this modular approach, different levels of information provision can be provided as required during the planning process.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{WellmannJelicBaitschHartmann2004,
  author    = {Wellmann Jelic, Andres and Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Distributed computing of failure probabilities for structures in civil engineering},
  doi       = {10.25643/bauhaus-universitaet.103},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1030},
  year      = {2004},
  abstract  = {In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@inproceedings{vanRooyenOlivier2004,
  author    = {van Rooyen, G.C. and Olivier, A. H.},
  title     = {Notes on structural analysis in a distributed collaboratory},
  doi       = {10.25643/bauhaus-universitaet.145},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1451},
  year      = {2004},
  abstract  = {The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{TsouLamWong2004,
  author    = {Tsou, Jin-Yeu and Lam, Selina and Wong, Wing Kin Gary},
  title     = {Design of Rapidly Assembled Isolation Patient Ward - IT-Supported Collaborative Design Process between Architects and Medical Officers},
  doi       = {10.25643/bauhaus-universitaet.174},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1748},
  year      = {2004},
  abstract  = {An important feature of the 2003 SARS outbreak in Canada, Singapore, and Hong Kong was that many health care workers (HCWs) developed SARS after caring for patients with SARS. This has been ascribed to inadequate or ineffective patient isolation. However, it is difficult for dense cities to provide sufficient isolation facilities within a short period of time. This has raised concerns from the public for new strategies in the planning and design of isolation facilities. Considering that SARS or other infectious diseases could seriously damage our society's development, isolation facilities that could be rapidly and economically constructed with appropriate environmental controls are essential. For this reason, the design team of the Department of Architecture collaborated with a special task force from the Faculty of Medicine, who are the frontline medical officers treating the SARS patients, to design Rapidly Assembled Isolation Patient Wards. Both architecture and medicine are well established disciplines, but they have little in common in terms of the mode of knowledge construction and practice. This induced much intellectual exploration and research interest in conducting this study. The process has provided an important reference for cross disciplinary studies between the architectural and medical domains.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{TonnWolkowiczThurow2004,
  author    = {Tonn, Christian and Wolkowicz, Christian and Thurow, Torsten},
  title     = {Plausibility in Architectural Design - DOMEdesign - Software Support for the formal shaping and architect-oriented design of shell structures},
  doi       = {10.25643/bauhaus-universitaet.181},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1812},
  year      = {2004},
  abstract  = {Complex gridshell structures used in architecturally ambitious constructions remain as appealing as ever in the public realm. This paper describes the theory and approach behind the software realisation of a tool which helps in finding the affine self-weight geometry of gridshell structures. The software tool DOMEdesign supports the formal design process of lattice and grid shell structures based upon the laws of physics. The computer-aided simulation of suspension models is used to derive structurally favourable forms for domes and arches subject to compression load, based upon the input of simple architectonic parameters. Irregular plans, three-dimensional topography, a choice different kinds of shell lattice structures and the desired height of the dome are examples of design parameters which can be used to modify the architectural design. The provision of data export formats for structural dimensioning and visualisation software enables engineers and planners to use the data in future planning and to communicate the design to the client.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{ThurowDonath2004,
  author    = {Thurow, Torsten and Donath, Dirk},
  title     = {A vision of an adaptive geometry model for computer-assisted building surveying},
  doi       = {10.25643/bauhaus-universitaet.172},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1722},
  year      = {2004},
  abstract  = {The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment.},
  subject      = {Architektur},
  language  = {en}
}
@article{SemenovBazhanMorozov2004,
  author    = {Semenov, Vitaly and Bazhan, Andrew and Morozov, Sergey},
  title     = {Distributed STEP-Compliant Platform for Multimodal Collaboration in Architecture, Engineering, and Construction},
  doi       = {10.25643/bauhaus-universitaet.261},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2616},
  year      = {2004},
  abstract  = {This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction.},
  subject      = {Framework <Informatik>},
  language  = {en}
}
@inproceedings{SchleyMejstrikHolz2004,
  author    = {Schley, Frank and Mejstrik, Marcus and Holz, K.-Peter},
  title     = {Network Based Co-operation Platform for Geotechnical Engineering},
  doi       = {10.25643/bauhaus-universitaet.143},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1431},
  year      = {2004},
  abstract  = {This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{SchinkKoch2004,
  author    = {Schink, Claus-J{\"u}rgen and Koch, Volker},
  title     = {Interdisciplinary Cooperation Modules in Mobile Networks},
  doi       = {10.25643/bauhaus-universitaet.178},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1788},
  year      = {2004},
  abstract  = {The contribution describes the didactical integration of wireless access networks for the campus of the University of Karlsruhe in the education of architects and engineers. It focuses on the development of an interdisciplinary communication network to encourage and promote the communication and collaboration between students. The project assumes that significant learning progresses in net-based learning scenarios are based upon the synchronous and asynchronous cooperation between the students themselves. The remote cooperation across borders of disciplines makes high demands on capacity in communicating and cooperating of the involved persons as well as on the supporting tools. Therefore, the collective acquisition of knowledge and cooperation has to be trained intensively during the studies. Based on the design and project oriented cooperation platform netzentwurf.de the authors developed the tools "Jobadmin" to administrate multidisciplinary workgroups, the "Swarm Knowledge Catalogue" to collect and store knowledge and "LivingCampus", an instrument providing basic services for dynamic communication.},
  subject      = {Architektur},
  language  = {en}
}