@inproceedings{BeranHromada,
  author    = {Beran, V{\´a}clav and Hromada, E.},
  title     = {SOFTWARE FOR PROJECT RELIABILITY ESTIMATION AND RISK EVALUATION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2925},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29255},
  pages     = {16},
  abstract  = {The contribution presents a model that is able to simulate construction duration and cost for a building project. This model predicts set of expected project costs and duration schedule depending on input parameters such as production speed, scope of work, time schedule, bonding conditions and maximum and minimum deviations from scope of work and production speed. The simulation model is able to calculate, on the basis of input level of probability, the adequate construction cost and time duration of a project. The reciprocal view attends to finding out the adequate level of probability for construction cost and activity durations. Among interpretive outputs of the application software belongs the compilation of a presumed dynamic progress chart. This progress chart represents the expected scenario of development of a building project with the mapping of potential time dislocations for particular activities. The calculation of a presumed dynamic progress chart is based on an algorithm, which calculates mean values as a partial result of the simulated building project. Construction cost and time models are, in many ways, useful tools in project management. Clients are able to make proper decisions about the time and cost schedules of their investments. Consequently, building contractors are able to schedule predicted project cost and duration before any decision is finalized.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BerbigMenzelEisenblaetter2003,
  author    = {Berbig, Torsten and Menzel, Karsten and Eisenbl{\"a}tter, Karin},
  title     = {"Mobile Computing" - Anforderungen \& Einf{\"u}hrungsstratgie aus Sicht der Baupraxis},
  doi       = {10.25643/bauhaus-universitaet.294},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2948},
  year      = {2003},
  abstract  = {Die Sicherung der Wettbewerbsf{\"a}higkeit im Bereich des Bauwesens, insbesondere kleinerer und mittelst{\"a}ndischer Betriebe erfordert ein aktives Handeln als Antwort auf die sich {\"a}ndernde Wettbewerbssituation. Einen wesentlichen Wettbewerbsvorteil k{\"o}nnen kleine unternehmerische Einheiten durch h{\"o}here Flexibilit{\"a}t, schnelle Reaktion auf Kundenw{\"u}nsche oder aktuelle Situationen auf der Baustelle und Marktn{\"a}he erreichen. Dazu ist es n{\"o}tig, die Informations- und Kommunikationsstr{\"o}me durch Einsatz standardisierter und kosteng{\"u}nstiger Hard- und Software wie z.B. Handhelds zu unterst{\"u}tzen und insbesondere die existierenden Hindernisse im Informationsfluss zwischen Baustelle und B{\"u}ro zu beseitigen. Am Beispiel der Projekte >IuK - SystemBau< und >eSharing< wird eine Einf{\"u}hrungsstrategie f{\"u}r >Mobile Computing< in kleinen unternehmerischen Einheiten des Bauwesens (KMU) basierend auf einer umfangreichen Anforderungsanalyse vorgestellt. Folgende Aspekte sollen beschrieben werden: durchg{\"a}ngiger Einsatz der Technik unter Beachtung der verschiedenen Qualifikationsniveaus, Einf{\"u}hrungsunterst{\"u}tzung durch Schulungen, Prozessanalyse und m{\"o}gliche Integration in bestehende Software-Umgebungen sowie Feldtests.},
  subject      = {Bauablauf / Ablaufplanung},
  language  = {de}
}
@inproceedings{BertholdMilbradt,
  author    = {Berthold, Tim and Milbradt, Peter},
  title     = {ARTIFICIAL NEURONAL NETWORKS IN ENVIRONMENTAL ENGINEERING: THEORY AND APPLICATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2830},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28304},
  pages     = {14},
  abstract  = {Models in the context of engineering can be classified in process based and data based models. Whereas the process based model describes the problem by an explicit formulation, the data based model is often used, where no such mapping can be found due to the high complexity of the problem. Artificial Neuronal Networks (ANN) is a data based model, which is able to "learn" a mapping from a set of training patterns. This paper deals with the application of ANN in time dependent bathymetric models. A bathymetric model is a geometric representation of the sea bed. Typically, a bathymetry is been measured and afterwards described by a finite set of measured data. Measuring at different time steps leads to a time dependent bathymetric model. To obtain a continuous surface, the measured data has to be interpolated by some interpolation method. Unlike the explicitly given interpolation methods, the presented time dependent bathymetric model using an ANN trains the approximated surface in space and time in an implicit way. The ANN is trained by topographic measured data, which consists of the location (x,y) and time t. In other words the ANN is trained to reproduce the mapping h = f(x,y,t) and afterwards it is able to approximate the topographic height for a given location and date. In a further step, this model is extended to take meteorological parameters into account. This leads to a model of more predictive character.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Bilchuk,
  author    = {Bilchuk, Irina},
  title     = {GEOMETRIC IDENTIFICATION OF OBJECTS IN CIVIL ENGINEERING APPLICATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2927},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29274},
  pages     = {21},
  abstract  = {Objects for civil engineering applications can be identified with their reference in memory, their alpha-numeric name or their geometric location. Particularly in graphic user interfaces, it is common to identify objects geometrically by selection with the mouse. As the number of geometric objects in a graphic user interface grows, it becomes increasingly more important to treat the basic operations add, search and remove for geometric objects with great efficiency. Guttmann has proposed the Region-Tree (R-tree) for geometric identification in an environment which uses pages on disc as data structure. Minimal bounding rectangles are used to structure the data in such a way that neighborhood relations can be described effectively. The literature shows that the parameters which influence the efficiency of the R-trees have been studied extensively, but without conclusive results. The goal of the research which is reported in this paper is to determine reliably the parameters which significantly influence the efficiency of R-trees for geometric identification in technical drawings. In order to make this investigation conclusive, it must be performed with the best available software technology. Therefore an object-oriented software for the method is developed. This implementation is tested with technical drawings containing many thousands of geometric objects. These drawings are created automatically by a stochastic generator which is incorporated into a test bed consisting of an editor and a visualisor. This test bed is used to obtain statistics for the main factors which affect the efficiency of R-trees. The investigation shows that the following main factors which affect the efficiency can be identified reliably : number of geometric objects on the drawing the minimum und maximum number of children of a node of the tree the maximum width and height of the minimal bounding rectangles of the geometric objects relative to the size of the drawing.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BilekHartmann2003,
  author    = {Bilek, Jochen and Hartmann, Dietrich},
  title     = {Agentenbasiertes Kooperationsmodell zur Unterst{\"u}tzung vernetzter Planungsprozesse in der Tragwerksplanung},
  doi       = {10.25643/bauhaus-universitaet.279},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2791},
  year      = {2003},
  abstract  = {Die heutige Situation in der Tragwerksplanung ist durch das kooperative Zusammenwirken einer gr{\"o}ßeren Anzahl von Fachleuten verschiedener Disziplinen (Architektur, Tragwerksplanung, etc.) in zeitlich befristeten Projektgemeinschaften gekennzeichnet. Bei der Abstimmung der hierdurch bedingten komplexen, dynamischen und vernetzten Planungsprozesse kommt es dabei h{\"a}ufig zu Planungsm{\"a}ngeln und Qualit{\"a}tseinbußen. Dieser Artikel zeigt auf, wie mit Hilfe der Agententechnologie L{\"o}sungsans{\"a}tze zur Verbesserung der Planungssituation erreicht werden k{\"o}nnen. Hierzu wird ein Agentenmodell f{\"u}r die vernetzt-kooperative Tragwerksplanung vorgestellt und anhand der Planung einer Fußg{\"a}ngerbogenbr{\"u}cke anschaulich demonstriert. Das Agentenmodell erfasst (1) die beteiligten Fachplaner und Organisationen, (2) die tragwerksspezifischen Planungsprozesse, (3) die zugeh{\"o}rigen (Teil-)Produktmodelle und (4) die genutzte (Ingenieur-)Software. Hieraus leiten sich die drei Teilmodelle (1) agentenbasiertes Kooperationsmodell, (2) agentenbasierte Produktmodellintegration und (3) Modell zur agentenbasierten Software-Integration ab. Der Fokus des Artikels liegt auf der Darstellung des agentenbasierten Kooperationsmodells.},
  subject      = {Tragwerk},
  language  = {de}
}
@inproceedings{BiltchoukPahl2004,
  author    = {Biltchouk, Irina and Pahl, Peter Jan},
  title     = {Interaction of Data Bases and Graphical Interfaces in Civil Engineering},
  doi       = {10.25643/bauhaus-universitaet.163},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1636},
  year      = {2004},
  abstract  = {Applications for civil engineering tasks usually contain graphical user interfaces for the engineering processes. Persistent objects of the applications are stored to data bases. The influence of the interaction between a graphical user interface and a data base for the development of an civil engineering application is investigated in this paper. A graphic application for the linear elastic analysis of plane frames, which was previously developed with standard tools of the Java platform, is compared to a redesigned implementation using a generalized data base for persistent objects. The investigation leads to the following results : - A strict distinction between persistent and transient objects influences the class structure of an application, in particular the class structure of a graphical user interface. - The structure of an application depends on the logic for updating of references to persistent and transient graphical objects after an application is read from a file. - The complexity of the reference management can usually be handled better by just in time referencing associated with String - identifiers rather than by automated referencing associated with Name - identifiers.},
  subject      = {Baubetrieb},
  language  = {en}
}
@inproceedings{BockGuerlebeck,
  author    = {Bock, Sebastian and G{\"u}rlebeck, Klaus},
  title     = {A Coupled Ritz-Galerkin Approach Using Holomorphic and Anti-holomorphic Functions},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2928},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29281},
  pages     = {14},
  abstract  = {The contribution focuses on the development of a basic computational scheme that provides a suitable calculation environment for the coupling of analytical near-field solutions with numerical standard procedures in the far-field of the singularity. The proposed calculation scheme uses classical methods of complex function theory, which can be generalized to 3-dimensional problems by using the framework of hypercomplex analysis. The adapted approach is mainly based on the factorization of the Laplace operator EMBED Equation.3 by the Cauchy-Riemann operator EMBED Equation.3 , where exact solutions of the respective differential equation are constructed by using an orthonormal basis of holomorphic and anti-holomorphic functions.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BombasaroBucher,
  author    = {Bombasaro, Emanuel and Bucher, Christian},
  title     = {INVESTIGATION OF MODELING ERRORS OF DIFFERENT RANDOM FIELD BASED WIND LOAD FORMULATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2831},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28318},
  pages     = {11},
  abstract  = {In this paper the influence of changes in the mean wind velocity, the wind profile power-law coefficient, the drag coefficient of the terrain and the structural stiffness are investigated on different complex structural models. This paper gives a short introduction to wind profile models and to the approach by Davenport A. G. to compute the structural reaction of wind induced vibrations. Firstly with help of a simple example (a skyscraper) this approach is shown. Using this simple example gives the reader the possibility to study the variance differences when changing one of the above mentioned parameters on this very easy example and see the influence of different complex structural models on the result. Furthermore an approach for estimation of the needed discretization level is given. With the help of this knowledge the structural model design methodology can be base on deeper understanding of the different behavior of the single models.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{BrackxDeKnockDeSchepper,
  author    = {Brackx, Fred and De Knock, B. and De Schepper, Hennie},
  title     = {A MULTI--DIMENSIONAL HILBERT TRANSFORM IN ANISOTROPIC CLIFFORD ANALYSIS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2929},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29297},
  pages     = {15},
  abstract  = {In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}
@inproceedings{BrackxDeSchepperDeSchepperetal.,
  author    = {Brackx, Fred and De Schepper, Hennie and De Schepper, Nele and Sommen, Frank},
  title     = {HERMITIAN CLIFFORD-HERMITE WAVELETS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  doi       = {10.25643/bauhaus-universitaet.2931},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170327-29313},
  pages     = {13},
  abstract  = {The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.},
  subject      = {Architektur <Informatik>},
  language  = {en}
}