@article{AbbaspourGilandehMolaeeSabzietal.,
  author    = {Abbaspour-Gilandeh, Yousef and Molaee, Amir and Sabzi, Sajad and Nabipour, Narjes and Shamshirband, Shahaboddin and Mosavi, Amir},
  title     = {A Combined Method of Image Processing and Artificial Neural Network for the Identification of 13 Iranian Rice Cultivars},
  series = {agronomy},
  volume    = {2020},
  journal   = {agronomy},
  number    = {Volume 10, Issue 1, 117},
  publisher = {MDPI},
  doi       = {10.3390/agronomy10010117},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200123-40695},
  pages     = {21},
  abstract  = {Due to the importance of identifying crop cultivars, the advancement of accurate assessment of cultivars is considered essential. The existing methods for identifying rice cultivars are mainly time-consuming, costly, and destructive. Therefore, the development of novel methods is highly beneficial. The aim of the present research is to classify common rice cultivars in Iran based on color, morphologic, and texture properties using artificial intelligence (AI) methods. In doing so, digital images of 13 rice cultivars in Iran in three forms of paddy, brown, and white are analyzed through pre-processing and segmentation of using MATLAB. Ninety-two specificities, including 60 color, 14 morphologic, and 18 texture properties, were identified for each rice cultivar. In the next step, the normal distribution of data was evaluated, and the possibility of observing a significant difference between all specificities of cultivars was studied using variance analysis. In addition, the least significant difference (LSD) test was performed to obtain a more accurate comparison between cultivars. To reduce data dimensions and focus on the most effective components, principal component analysis (PCA) was employed. Accordingly, the accuracy of rice cultivar separations was calculated for paddy, brown rice, and white rice using discriminant analysis (DA), which was 89.2\%, 87.7\%, and 83.1\%, respectively. To identify and classify the desired cultivars, a multilayered perceptron neural network was implemented based on the most effective components. The results showed 100\% accuracy of the network in identifying and classifying all mentioned rice cultivars. Hence, it is concluded that the integrated method of image processing and pattern recognition methods, such as statistical classification and artificial neural networks, can be used for identifying and classification of rice cultivars.},
  subject      = {Maschinelles Lernen},
  language  = {en}
}
@article{AhmadiBaghbanSadeghzadehetal.,
  author    = {Ahmadi, Mohammad Hossein and Baghban, Alireza and Sadeghzadeh, Milad and Zamen, Mohammad and Mosavi, Amir and Shamshirband, Shahaboddin and Kumar, Ravinder and Mohammadi-Khanaposhtani, Mohammad},
  title     = {Evaluation of electrical efficiency of photovoltaic thermal solar collector},
  series = {Engineering Applications of Computational Fluid Mechanics},
  volume    = {2020},
  journal   = {Engineering Applications of Computational Fluid Mechanics},
  number    = {volume 14, issue 1},
  publisher = {Taylor \& Francis},
  doi       = {10.1080/19942060.2020.1734094},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200304-41049},
  pages     = {545 -- 565},
  abstract  = {In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for thermal performance of a photovoltaic-thermal solar collector (PV/T). In the proposed models, the inlet temperature, flow rate, heat, solar radiation, and the sun heat have been considered as the input variables. Data set has been extracted through experimental measurements from a novel solar collector system. Different analyses are performed to examine the credibility of the introduced models and evaluate their performances. The proposed LSSVM model outperformed the ANFIS and ANNs models. LSSVM model is reported suitable when the laboratory measurements are costly and time-consuming, or achieving such values requires sophisticated interpretations.},
  subject      = {Fotovoltaik},
  language  = {en}
}
@article{AlsaadVoelker,
  author    = {Alsaad, Hayder and V{\"o}lker, Conrad},
  title     = {Der K{\"u}hlungseffekt der personalisierten L{\"u}ftung},
  series = {Bauphysik},
  volume    = {2020},
  journal   = {Bauphysik},
  number    = {volume 42, issue 5},
  publisher = {Ernst \& Sohn bei John Wiley \& Sons},
  address   = {Hoboken},
  doi       = {10.25643/bauhaus-universitaet.4272},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201020-42723},
  pages     = {218 -- 225},
  abstract  = {Personalisierte L{\"u}ftung (PL) kann die thermische Behaglichkeit sowie die Qualit{\"a}t der eingeatmeten Atemluft verbessern, in dem jedem Arbeitsplatz Frischluft separat zugef{\"u}hrt wird. In diesem Beitrag wird die Wirkung der PL auf die thermische Behaglichkeit der Nutzer unter sommerlichen Randbedingungen untersucht. Hierf{\"u}r wurden zwei Ans{\"a}tze zur Bewertung des K{\"u}hlungseffekts der PL untersucht: basierend auf (1) der {\"a}quivalenten Temperatur und (2) dem thermischen Empfinden. Grundlage der Auswertung sind in einer Klimakammer gemessene sowie numerisch simulierte Daten. Vor der Durchf{\"u}hrung der Simulationen wurde das numerische Modell zun{\"a}chst anhand der gemessenen Daten validiert. Die Ergebnisse zeigen, dass der Ansatz basierend auf dem thermischen Empfinden zur Evaluierung des K{\"u}hlungseffekts der PL sinnvoller sein kann, da bei diesem die komplexen physiologischen Faktoren besser ber{\"u}cksichtigt werden.},
  subject      = {L{\"u}ftung},
  language  = {de}
}
@article{AlsaadVoelker,
  author    = {Alsaad, Hayder and V{\"o}lker, Conrad},
  title     = {Performance evaluation of ductless personalized ventilation in comparison with desk fans using numerical simulations},
  series = {Indoor Air},
  volume    = {2020},
  journal   = {Indoor Air},
  publisher = {John Wiley \& Sons Ltd},
  doi       = {10.1111/ina.12672},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200422-41407},
  pages     = {14},
  abstract  = {The performance of ductless personalized ventilation (DPV) was compared to the performance of a typical desk fan since they are both stand-alone systems that allow the users to personalize their indoor environment. The two systems were evaluated using a validated computational fluid dynamics (CFD) model of an office room occupied by two users. To investigate the impact of DPV and the fan on the inhaled air quality, two types of contamination sources were modelled in the domain: an active source and a passive source. Additionally, the influence of the compared systems on thermal comfort was assessed using the coupling of CFD with the comfort model developed by the University of California, Berkeley (UCB model). Results indicated that DPV performed generally better than the desk fan. It provided better thermal comfort and showed a superior performance in removing the exhaled contaminants. However, the desk fan performed better in removing the contaminants emitted from a passive source near the floor level. This indicates that the performance of DPV and desk fans depends highly on the location of the contamination source. Moreover, the simulations showed that both systems increased the spread of exhaled contamination when used by the source occupant.},
  subject      = {Behaglichkeit},
  language  = {en}
}
@article{AlsaadVoelker,
  author    = {Alsaad, Hayder and V{\"o}lker, Conrad},
  title     = {Could the ductless personalized ventilation be an alternative to the regular ducted personalized ventilation?},
  series = {Indoor Air},
  volume    = {2020},
  journal   = {Indoor Air},
  publisher = {John Wiley \& Sons Ltd},
  doi       = {10.1111/ina.12720},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200805-42072},
  pages     = {13},
  abstract  = {This study investigates the performance of two systems: personalized ventilation (PV) and ductless personalized ventilation (DPV). Even though the literature indicates a compelling performance of PV, it is not often used in practice due to its impracticality. Therefore, the present study assesses the possibility of replacing the inflexible PV with DPV in office rooms equipped with displacement ventilation (DV) in the summer season. Numerical simulations were utilized to evaluate the inhaled concentration of pollutants when PV and DPV are used. The systems were compared in a simulated office with two occupants: a susceptible occupant and a source occupant. Three types of pollution were simulated: exhaled infectious air, dermally emitted contamination, and room contamination from a passive source. Results indicated that PV improved the inhaled air quality regardless of the location of the pollution source; a higher PV supply flow rate positively impacted the inhaled air quality. Contrarily, the performance of DPV was highly sensitive to the source location and the personalized flow rate. A higher DPV flow rate tends to decrease the inhaled air quality due to increased mixing of pollutants in the room. Moreover, both systems achieved better results when the personalized system of the source occupant was switched off.},
  subject      = {Str{\"o}mungsmechanik},
  language  = {en}
}
@article{AmirinasabShamshirbandChronopoulosetal.,
  author    = {Amirinasab, Mehdi and Shamshirband, Shahaboddin and Chronopoulos, Anthony Theodore and Mosavi, Amir and Nabipour, Narjes},
  title     = {Energy-Efficient Method for Wireless Sensor Networks Low-Power Radio Operation in Internet of Things},
  series = {electronics},
  volume    = {2020},
  journal   = {electronics},
  number    = {volume 9, issue 2, 320},
  publisher = {MDPI},
  doi       = {10.3390/electronics9020320},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200213-40954},
  pages     = {20},
  abstract  = {The radio operation in wireless sensor networks (WSN) in Internet of Things (IoT)applications is the most common source for power consumption. Consequently, recognizing and controlling the factors affecting radio operation can be valuable for managing the node power consumption. Among essential factors affecting radio operation, the time spent for checking the radio is of utmost importance for monitoring power consumption. It can lead to false WakeUp or idle listening in radio duty cycles and ContikiMAC. ContikiMAC is a low-power radio duty-cycle protocol in Contiki OS used in WakeUp mode, as a clear channel assessment (CCA) for checking radio status periodically. This paper presents a detailed analysis of radio WakeUp time factors of ContikiMAC. Furthermore, we propose a lightweight CCA (LW-CCA) as an extension to ContikiMAC to reduce the Radio Duty-Cycles in false WakeUps and idle listening though using dynamic received signal strength indicator (RSSI) status check time. The simulation results in the Cooja simulator show that LW-CCA reduces about 8\% energy consumption in nodes while maintaining up to 99\% of the packet delivery rate (PDR).},
  subject      = {Internet der Dinge},
  language  = {en}
}
@article{ArtusKoch,
  author    = {Artus, Mathias and Koch, Christian},
  title     = {State of the art in damage information modeling for RC bridges - A literature review},
  series = {Advanced Engineering Informatics},
  volume    = {2020},
  journal   = {Advanced Engineering Informatics},
  number    = {volume 46, article 101171},
  publisher = {Elsevier Science},
  address   = {Amsterdam},
  doi       = {10.1016/j.aei.2020.101171},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220506-46390},
  pages     = {1 -- 16},
  abstract  = {In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4\% and 2\% of its construction cost per year over its entire life cycle. This means that up to 80\% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.},
  subject      = {Building Information Modeling},
  language  = {de}
}
@article{BandJanizadehChandraPaletal.,
  author    = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Chowdhuri, Indrajit and Siabi, Zhaleh and Norouzi, Akbar and Melesse, Assefa M. and Shokri, Manouchehr and Mosavi, Amir Hosein},
  title     = {Comparative Analysis of Artificial Intelligence Models for Accurate Estimation of Groundwater Nitrate Concentration},
  series = {Sensors},
  volume    = {2020},
  journal   = {Sensors},
  number    = {Volume 20, issue 20, article 5763},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/s20205763},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43364},
  pages     = {1 -- 23},
  abstract  = {Prediction of the groundwater nitrate concentration is of utmost importance for pollution control and water resource management. This research aims to model the spatial groundwater nitrate concentration in the Marvdasht watershed, Iran, based on several artificial intelligence methods of support vector machine (SVM), Cubist, random forest (RF), and Bayesian artificial neural network (Baysia-ANN) machine learning models. For this purpose, 11 independent variables affecting groundwater nitrate changes include elevation, slope, plan curvature, profile curvature, rainfall, piezometric depth, distance from the river, distance from residential, Sodium (Na), Potassium (K), and topographic wetness index (TWI) in the study area were prepared. Nitrate levels were also measured in 67 wells and used as a dependent variable for modeling. Data were divided into two categories of training (70\%) and testing (30\%) for modeling. The evaluation criteria coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and Nash-Sutcliffe efficiency (NSE) were used to evaluate the performance of the models used. The results of modeling the susceptibility of groundwater nitrate concentration showed that the RF (R2 = 0.89, RMSE = 4.24, NSE = 0.87) model is better than the other Cubist (R2 = 0.87, RMSE = 5.18, NSE = 0.81), SVM (R2 = 0.74, RMSE = 6.07, NSE = 0.74), Bayesian-ANN (R2 = 0.79, RMSE = 5.91, NSE = 0.75) models. The results of groundwater nitrate concentration zoning in the study area showed that the northern parts of the case study have the highest amount of nitrate, which is higher in these agricultural areas than in other areas. The most important cause of nitrate pollution in these areas is agriculture activities and the use of groundwater to irrigate these crops and the wells close to agricultural areas, which has led to the indiscriminate use of chemical fertilizers by irrigation or rainwater of these fertilizers is washed and penetrates groundwater and pollutes the aquifer.},
  subject      = {Grundwasser},
  language  = {en}
}
@article{BandJanizadehChandraPaletal.,
  author    = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Saha, Asish and Chakrabortty, Rabbin and Shokri, Manouchehr and Mosavi, Amir Hosein},
  title     = {Novel Ensemble Approach of Deep Learning Neural Network (DLNN) Model and Particle Swarm Optimization (PSO) Algorithm for Prediction of Gully Erosion Susceptibility},
  series = {Sensors},
  volume    = {2020},
  journal   = {Sensors},
  number    = {Volume 20, issue 19, article 5609},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/s20195609},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43341},
  pages     = {1 -- 27},
  abstract  = {This study aims to evaluate a new approach in modeling gully erosion susceptibility (GES) based on a deep learning neural network (DLNN) model and an ensemble particle swarm optimization (PSO) algorithm with DLNN (PSO-DLNN), comparing these approaches with common artificial neural network (ANN) and support vector machine (SVM) models in Shirahan watershed, Iran. For this purpose, 13 independent variables affecting GES in the study area, namely, altitude, slope, aspect, plan curvature, profile curvature, drainage density, distance from a river, land use, soil, lithology, rainfall, stream power index (SPI), and topographic wetness index (TWI), were prepared. A total of 132 gully erosion locations were identified during field visits. To implement the proposed model, the dataset was divided into the two categories of training (70\%) and testing (30\%). The results indicate that the area under the curve (AUC) value from receiver operating characteristic (ROC) considering the testing datasets of PSO-DLNN is 0.89, which indicates superb accuracy. The rest of the models are associated with optimal accuracy and have similar results to the PSO-DLNN model; the AUC values from ROC of DLNN, SVM, and ANN for the testing datasets are 0.87, 0.85, and 0.84, respectively. The efficiency of the proposed model in terms of prediction of GES was increased. Therefore, it can be concluded that the DLNN model and its ensemble with the PSO algorithm can be used as a novel and practical method to predict gully erosion susceptibility, which can help planners and managers to manage and reduce the risk of this phenomenon.},
  subject      = {Geoinformatik},
  language  = {en}
}
@article{BandJanizadehSahaetal.,
  author    = {Band, Shahab S. and Janizadeh, Saeid and Saha, Sunil and Mukherjee, Kaustuv and Khosrobeigi Bozchaloei, Saeid and Cerd{\`a}, Artemi and Shokri, Manouchehr and Mosavi, Amir Hosein},
  title     = {Evaluating the Efficiency of Different Regression, Decision Tree, and Bayesian Machine Learning Algorithms in Spatial Piping Erosion Susceptibility Using ALOS/PALSAR Data},
  series = {Land},
  volume    = {2020},
  journal   = {Land},
  number    = {volume 9, issue 10, article 346},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/land9100346},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43424},
  pages     = {1 -- 22},
  abstract  = {Piping erosion is one form of water erosion that leads to significant changes in the landscape and environmental degradation. In the present study, we evaluated piping erosion modeling in the Zarandieh watershed of Markazi province in Iran based on random forest (RF), support vector machine (SVM), and Bayesian generalized linear models (Bayesian GLM) machine learning algorithms. For this goal, due to the importance of various geo-environmental and soil properties in the evolution and creation of piping erosion, 18 variables were considered for modeling the piping erosion susceptibility in the Zarandieh watershed. A total of 152 points of piping erosion were recognized in the study area that were divided into training (70\%) and validation (30\%) for modeling. The area under curve (AUC) was used to assess the effeciency of the RF, SVM, and Bayesian GLM. Piping erosion susceptibility results indicated that all three RF, SVM, and Bayesian GLM models had high efficiency in the testing step, such as the AUC shown with values of 0.9 for RF, 0.88 for SVM, and 0.87 for Bayesian GLM. Altitude, pH, and bulk density were the variables that had the greatest influence on the piping erosion susceptibility in the Zarandieh watershed. This result indicates that geo-environmental and soil chemical variables are accountable for the expansion of piping erosion in the Zarandieh watershed.},
  subject      = {Maschinelles Lernen},
  language  = {en}
}