@article{VogelArnoldVoelkeretal., author = {Vogel, Albert and Arnold, J{\"o}rg and Voelker, Conrad and Kornadt, Oliver}, title = {Data for sound pressure level prediction in lightweight constructions caused by structure-borne sound sources and their uncertainties}, series = {Data in Brief}, volume = {2023}, journal = {Data in Brief}, number = {Volume 48, June 2023, article 109292}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.dib.2023.109292}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230719-64114}, pages = {1 -- 16}, abstract = {When predicting sound pressure levels induced by structure-borne sound sources and describing the sound propagation path through the building structure as exactly as possible, it is necessary to characterize the vibration behavior of the structure-borne sound sources. In this investigation, the characterization of structure-borne sound sources was performed using the two-stage method (TSM) described in EN 15657. Four different structure-borne sound sources were characterized and subsequently installed in a lightweight test stand. The resulting sound pressure levels in an adjacent receiving room were measured. In the second step, sound pressure levels were predicted according to EN 12354-5 based on the parameters of the structure-borne sound sources. Subsequently, the predicted and the measured sound pressure levels were compared to obtain reliable statements on the achievable accuracy when using source quantities determined by TSM with this prediction method.}, subject = {Bauakustik}, language = {en} } @article{AbdelnourZabel, author = {Abdelnour, Mena and Zabel, Volkmar}, title = {Modal identification of structures with a dynamic behaviour characterised by global and local modes at close frequencies}, series = {Acta Mechanica}, volume = {2023}, journal = {Acta Mechanica}, publisher = {Springer}, address = {Wien}, doi = {10.1007/s00707-023-03598-z}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230525-63822}, pages = {1 -- 21}, abstract = {Identification of modal parameters of a space frame structure is a complex assignment due to a large number of degrees of freedom, close natural frequencies, and different vibrating mechanisms. Research has been carried out on the modal identification of rather simple truss structures. So far, less attention has been given to complex three-dimensional truss structures. This work develops a vibration-based methodology for determining modal information of three-dimensional space truss structures. The method uses a relatively complex space truss structure for its verification. Numerical modelling of the system gives modal information about the expected vibration behaviour. The identification process involves closely spaced modes that are characterised by local and global vibration mechanisms. To distinguish between local and global vibrations of the system, modal strain energies are used as an indicator. The experimental validation, which incorporated a modal analysis employing the stochastic subspace identification method, has confirmed that considering relatively high model orders is required to identify specific mode shapes. Especially in the case of the determination of local deformation modes of space truss members, higher model orders have to be taken into account than in the modal identification of most other types of structures.}, subject = {Fachwerkbau}, language = {en} } @article{KreskowskiRendleFroehlich, author = {Kreskowski, Adrian and Rendle, Gareth and Fr{\"o}hlich, Bernd}, title = {Efficient Direct Isosurface Rasterization of Scalar Volumes}, series = {Computer Graphics Forum}, volume = {2022}, journal = {Computer Graphics Forum}, number = {Volume 4, Issue 7}, publisher = {Wiley Blackwell}, address = {Oxford}, doi = {10.1111/cgf.14670}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230525-63835}, pages = {215 -- 226}, abstract = {In this paper we propose a novel and efficient rasterization-based approach for direct rendering of isosurfaces. Our method exploits the capabilities of task and mesh shader pipelines to identify subvolumes containing potentially visible isosurface geometry, and to efficiently extract primitives which are consumed on the fly by the rasterizer. As a result, our approach requires little preprocessing and negligible additional memory. Direct isosurface rasterization is competitive in terms of rendering performance when compared with ray-marching-based approaches, and significantly outperforms them for increasing resolution in most situations. Since our approach is entirely rasterization based, it affords straightforward integration into existing rendering pipelines, while allowing the use of modern graphics hardware features, such as multi-view stereo for efficient rendering of stereoscopic image pairs for geometry-bound applications. Direct isosurface rasterization is suitable for applications where isosurface geometry is highly variable, such as interactive analysis scenarios for static and dynamic data sets that require frequent isovalue adjustment.}, subject = {Rendering}, language = {en} } @article{SanderWeissermel, author = {Sander, Hendrik and Weißermel, S{\"o}ren}, title = {Urban Heat Transition in Berlin: Corporate Strategies, Political Conflicts, and Just Solutions}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6178}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63845}, pages = {361 -- 371}, abstract = {In the field of urban climate policy, heat production and demand are key sectors for achieving a sustainable city. Heat production has to shift from fossil to renewable energies, and the heat demand of most buildings has to be reduced significantly via building retrofits. However, analyses of heat transition still lack its contextualization within entangled urban politico-economic processes and materialities and require critical socio-theoretical examination. Asking about the embeddedness of heat transition within social relations and its implications for social justice issues, this article discusses the challenges and opportunities of heat transition, taking Berlin as an example. It uses an urban political ecology perspective to analyze the materialities of Berlin's heating-housing nexus, its politico-economic context, implications for relations of inequality and power, and its contested strategies. The empirical analysis identifies major disputes about the future trajectory of heat production and about the distribution of retrofit costs. Using our conceptual approach, we discuss these empirical findings against the idea of a more just heat transition. For this purpose, we discuss three policy proposals regarding cost distribution, urban heat planning, and remunicipalization of heat utilities. We argue that this conceptual approach provides huge benefits for debates around heat transition and, more generally, energy justice and just transitions.}, subject = {Berlin}, language = {en} } @article{Bockelmann, author = {Bockelmann, Leo}, title = {Impacts of Change: Analysing the Perception of Industrial Heritage in the Vogtland Region}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6025}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63814}, pages = {30 -- 38}, abstract = {Beyond metropolitan areas, many peripheral regions and their cities in Europe have, in manifold ways, been significantly shaped by industrialisation. In the context of the relocation of industrial production to other countries over the last decades, the question has been raised as to the role this heritage can play in futural regional development as well as the potential local identification with this history. Hence, this article seeks to analyse the perception of the industrial heritage in the Vogtland region, located alongside the border of three German federal states and the Czech Republic. It inquires as to the perception of the industrial heritage by the local population and related potential future narrations. Based on spontaneous and explorative interviews with local people as an empirical base, a discrepancy between the perception of the tangible and intangible dimensions of the industrial heritage can be observed. On the one hand, the tangible heritage like older factories and production complexes are seen as a functional legacy and an "eyesore" narrative is attributed to them. On the other hand, people often reference the personal and familial connection to the industry and highlight its importance for the historical development and the wealth of the region. But these positive associations are mainly limited to the intangible dimension and are disconnected from the material artefacts of industrial production.}, subject = {Vogtland}, language = {en} } @article{DamirMeyerAziz, author = {Damir, Mirhan and Meyer, Martin and Aziz, Hellen}, title = {Patterns of Detachment: Spatial Transformations of the Phosphate Industry in el-Quseir, Egypt}, series = {Urban Planning}, volume = {2023}, journal = {Urban Planning}, number = {Volume 8, No 1}, publisher = {Cogitatio Press}, address = {Lissabon}, doi = {10.17645/up.v8i1.6053}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63805}, pages = {1 -- 16}, abstract = {The establishment of phosphate mines and processing plants by Italian entrepreneurs in el-Quseir in 1912 revitalized a town that had faced a steady decline after the opening of the Suez Canal and re-linked it to the world economy. To this day, the now defunct industrial site occupies a large section of physical el-Quseir and plays a key role in its identity. In this article, we explore the impact of the company's successive industrialization and deindustrialization based on archival research, interviews, and mapping. By tracing physical changes on-site and in the city of el-Quseir from the founding of its phosphate industry until today, as well as the historical and current interactions of citizens with the industrial facilities, we hope to better understand the "cluster value" of the industrial plant in quotidian life and the effect of the vacuum left behind after the termination of production. As machinery and buildings are slowly eroding in the absence of expressed interest by the former Italian and current Egyptian owners, we aim to discuss the relationship between the citizens and their el-Quseir phosphate plant as a crucial element of its heritage value at the local level.}, subject = {{\"A}gypten}, language = {en} } @article{GrimmeKollakidouSonderskovZarpetal., author = {Grimme, Sophie Alice and Kollakidou, Avgi and S{\o}nderskov Zarp, Christian and Hornecker, Eva and Kr{\"u}ger, Norbert and Graf, Phillip and Marchetti, Emanuela}, title = {Floor Cleaners as Helper Pets: Projecting Assistive Robots' Agency on Zoomorphic Affordances}, series = {SN Computer Science}, volume = {2023}, journal = {SN Computer Science}, number = {volume 4, article 372}, publisher = {Springer}, address = {Singapur}, doi = {10.1007/s42979-023-01769-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63796}, pages = {1 -- 14}, abstract = {Care of ageing adults has become a dominant field of application for assistive robot technologies, promising support for ageing adults residing in care homes and staff, in dealing with practical routine tasks and providing social and emotional relieve. A time consuming and human intensive necessity is the maintenance of high hygiene quality in care homes. Robotic vacuum cleaners have been proven effective for doing the job elsewhere, but—in the context of care homes—are counterproductive for residents' well-being and do not get accepted. This is because people with dementia manifest their agency in more implicit and emotional ways, while making sense of the world around them. Starting from these premises, we explored how a zoomorphic designed vacuum cleaner could better accommodate the sensemaking of people with dementia. Our design reconceptualises robotic vacuum cleaners as a cat-like robot, referring to a playful behaviour and appearance to communicate a non-threatening and familiar role model. Data from an observational study shows that residents responded positively to our prototype, as most of them engaged playfully with it as if it was a pet or a cat-like toy, for example luring it with gestures. Some residents simply ignored the robot, indicating that it was not perceived as frightening or annoying. The level of activity influenced reactions; residents ignored our prototype if busy with other occupations, which proves that it did not cause significant disturbance. We further report results from focus group sessions with formal and informal caregivers who discussed a video prototype of our robot. Caregivers encouraged us to enhance the animal like characteristics (in behaviour and materiality) even further to result in richer interactions and provoke haptic pleasure but also pointed out that residents should not mistake the robot for a real cat.}, subject = {Alter}, language = {en} } @article{AbrahamczykUzair, author = {Abrahamczyk, Lars and Uzair, Aanis}, title = {On the use of climate models for estimating the non-stationary characteristic values of climatic actions in civil engineering practice}, series = {Frontiers in Built Environment}, volume = {2023}, journal = {Frontiers in Built Environment}, number = {volume 9, article 1108328}, publisher = {Frontier Media}, address = {Lausanne}, doi = {10.3389/fbuil.2023.1108328}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63751}, pages = {1 -- 9}, abstract = {The characteristic values of climatic actions in current structural design codes are based on a specified probability of exceedance during the design working life of a structure. These values are traditionally determined from the past observation data under a stationary climate assumption. However, this assumption becomes invalid in the context of climate change, where the frequency and intensity of climatic extremes varies with respect to time. This paper presents a methodology to calculate the non-stationary characteristic values using state of the art climate model projections. The non-stationary characteristic values are calculated in compliance with the requirements of structural design codes by forming quasi-stationary windows of the entire bias-corrected climate model data. Three approaches for the calculation of non-stationary characteristic values considering the design working life of a structure are compared and their consequences on exceedance probability are discussed.}, subject = {Klima{\"a}nderung}, language = {en} } @article{WiegandOsburg, author = {Wiegand, Torben and Osburg, Andrea}, title = {Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources}, series = {Polymers}, volume = {2023}, journal = {Polymers}, number = {volume 15, issue 4, article 990}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym15040990}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230524-63745}, pages = {1 -- 12}, abstract = {Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4′-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis.}, subject = {Epoxide}, language = {en} } @article{AlemuHabteLahmeretal., author = {Alemu, Yohannes L. and Habte, Bedilu and Lahmer, Tom and Urgessa, Girum}, title = {Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings}, series = {Asian Journal of Civil Engineering}, volume = {2023}, journal = {Asian Journal of Civil Engineering}, publisher = {Springer International Publishing}, address = {Cham}, doi = {10.1007/s42107-023-00640-2}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230517-63677}, pages = {1 -- 11}, abstract = {As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes.}, subject = {Bodenmechanik}, language = {en} }