TY - JOUR A1 - Misztal, S. A1 - Misztal, G. T1 - Anwendung von Delta-Dirac-Funktion und Heviside-Funktion zur Berechnung der inneren Kräfte und Verschiebungen in gebogenen Balken N2 - Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erwähnten Funktionen dargestellt. Darüber hinaus wird die Möglichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle Fälle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen Lösungen geben die Möglichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen ermöglicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die Möglichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen. KW - Balken KW - Belastung KW - Mathematisches Modell KW - Computerunterstütztes Verfahren Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5308 ER - TY - JOUR A1 - Strukelj, A. T1 - Some Problems in Obtaining the Green's Function of the Layered Soil N2 - The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process KW - Bodenmechanik KW - Geschichtetes Medium KW - Green-Funktion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5388 ER - TY - JOUR A1 - Kaplinski, O. T1 - Phenomenon of inhertia in the Production Systems reliability Analysis N2 - The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve. KW - Zuverlässigkeitstheorie KW - Trägheit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5320 ER - TY - JOUR A1 - Ganev, T. A1 - Marinov, M. T1 - Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency N2 - Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed. KW - Platte KW - Optimierung KW - Freie Schwingung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5375 ER - TY - JOUR A1 - Skrinar, Matjaz T1 - Computation of Stresses and Settlements under an arbitrary Point in Homogenous, elastic, isotropic Half-Space, under the Load described by a uniform Load over a general quadrilateral N2 - The problem of the computation of stresses and settlements in the half-space under various types of loads is often presented in geotechnical engineering. In 1885 Boussinesq advanced theoretical expressions to determine stresses at a point within an ideal mass. His equation considers a point load on the surface of a semi-infinite, homogeneous, isotropic, weightless, elastic half-space. Newmark in 1942 performed the integration of Boussinesq's equations for the vertical stress under a corner of a rectangular area loaded with a uniform load. The problem of the determination of vertical stresses under a rectangular shaped footing has been satisfactorily solved with renewal integration of the Boussinesq's equation over the arbitrary rectangle on surface of the half-space, with a non-uniform load represented with piecewise linear interpolation functions. The problem of the determination of stresses in the case when the footing shape is an arbitrary quadrilateral however remains unsolved. The paper discusses an approach to the computation of vertical stresses and settlements in an arbitrary point of the half-space, loaded with a uniform load, which shape in the ground plan can be a general four noded form with straight edges. Since the form is transformed into a biunit square and all integrations are performed over this area, all solutions are valid also for an arbitrary triangle by the implementation of the degeneration rule. KW - Halbraum KW - Isotropie KW - Spannung KW - Setzung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5338 ER - TY - JOUR A1 - Kaiser, Wolfgang T1 - Die unbegrenzten Einsatzmöglichkeiten von 3D-Modellierern N2 - Der Funktionsumfang von 3D-Modellierern und die Leistung allgemein zur Verfügung stehender Rechnersysteme gestatten die Modellierung beliebiger Objekte in jeder nur denkbaren Fachdisziplin. Das potentielle Leistungsvermögen von 3D-Modellierern sollte Anreiz sein, sie so alltäglich einzusetzen, wie die etablierten Standardapplikationen. Die im Vortrag gezeigten Modelle umfassen ein kleines Spektrum der möglichen Anwendungsgebiete. Weder vom (Daten)Umfang noch von ihrem Kompliziertheitsgrad stellen sie etwas Besonderes dar. Sie sollen nur das Interesse für einen alltäglichen Einsatz von 3D-Modellierern wecken und eventuell vorhandenen Einsatzschwellen abbauen helfen. Die im Vortrag gezeigten Bildfolgen sind unter http://www.uni-weimar.de/animationen zu finden. KW - Dreidimensionales Modell KW - Anwendung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5257 ER - TY - JOUR A1 - Fischer, A. A1 - Steinhage, V. T1 - Ein modellbasiertes Konzept zur städteplanerischen Kartierung durch digitale Bildanalyse N2 - There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets KW - Stadtplanung KW - Kartierung KW - Bildanalyse KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4870 ER - TY - JOUR A1 - Voronin, V. P. T1 - Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency N2 - Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations. KW - Bauwerk KW - Rekonstruktion KW - Wirtschaftlichkeit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5296 ER - TY - JOUR A1 - Huhnt, Wolfgang T1 - Informationstechnische Integration im Bauwesen durch Nutzung fachspezifischen Anwenderwissens N2 - Im vorliegenden Beitrag wird ein Integrationskonzept vorgestellt, bei dem das fachspezifische Wissen des Anwenders integraler Bestandteil des Konzeptes ist. Grundgedanke des Konzeptes ist es, die Informationen vorerst im Kontext der Anwendung, mit der sie erstellt wurden, zu belassen. Die Interpretation der Informationen erfolgt durch den Anwender, der diese Informationen zur Integration nutzen möchte. Er weiß, welche Daten er für seine Arbeiten benötigt, und er verfügt über das erforderliche fachspezifische Wissen, um die Informationen anderer Bearbeiter verstehen zu können. Damit ist es nicht erforderlich, die internen Datenstrukturen einer Software zu verstehen und in einem neutralen Format zu beschreiben. Die Integration erfolgt interaktiv am Bildschirm durch den Anwender. Das vorgestellt Konzept wird in den Kontext der in der Literatur beschriebenen Integrationskonzepte eingegliedert. Hierzu werden die Integrationskonzepte klassifiziert. Die Klassifikation erfolgt auf der Grundlage der Software-Architekturen. Das vorgestellte Integrationskonzept wird am Beispiel der Angebotsbearbeitung im Bauwesen konkretisiert. KW - CAD KW - Dialogsystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4901 ER - TY - JOUR A1 - Ngo, D. Q. A1 - Rüppel, Uwe T1 - BINAS - Ein Entscheidungshilfesystem für die Bestandsanalyse von Bauwerken N2 - Bauwerke sind in ihrer Betriebszeit vielen nutzungseinschränkenden Einflüssen ausgesetzt. Die dadurch erforderliche Instandhaltung dient zur Gewährleistung und zur Erhöhung der geplanten Nutzungsfähigkeit sowie Dauerhaftigkeit von Bauwerken. Sie spielt eine immer größere Rolle im Bauwesen. Die Kosten der Bauwerksinstandhaltung betragen je nach Art des Bauwerkes in Deutschland pro Jahr ca. 1-6% des Wiederbeschaffungswertes. Die Reduzierung des Instandhaltungsaufwandes durch Technik- und Management-Maßnahmen ist daher wirtschaftlich sinnvoll. Der Einsatz moderner Informations- und Kommunikationstechnologie auf dem Gebiet der Bestandsaufnahme und -analyse ist erforderlich, um einerseits die Bearbeitung von multimedialen Informationen über Ist- und Soll-Zustände von Bauwerken effektiver durchzuführen und um andererseits die Analyse von Schäden im Sinne einer Entscheidungshilfe zu unterstützen. Durch den Einsatz der WWW-Technologie kann die Bearbeitung auch verteilt im Datennetz über ferne Rechner hinweg erfolgen. Im Beitrag werden die Konzeptionierung und Implementierung des WWW-fähigen DV-Systems BINAS zur Unterstützung der Bestandsaufnahme und -analyse sowie die dafür erforderlichen Methoden und Werkzeuge vorgestellt. KW - Bauwerk KW - Bauschaden KW - Instandhaltung KW - Entscheidungsunterstützungssystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4994 ER -