@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {Proceedings},
  booktitle = {Proceedings},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2598},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-25982},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  language  = {en}
}
@inproceedings{HijaziHusseinKoenig,
  author    = {Hijazi, Ihab Hamzi and Hussein, M. H. and K{\"o}nig, Reinhard},
  title     = {Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building},
  series = {9th 3DGeoInfo Conference},
  booktitle = {9th 3DGeoInfo Conference},
  address   = {Dubai, UAE},
  doi       = {10.25643/bauhaus-universitaet.2508},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25089},
  pages     = {4},
  abstract  = {Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building},
  subject      = {Informatik},
  language  = {en}
}
@techreport{KoenigTapiasSchmitt,
  author    = {K{\"o}nig, Reinhard and Tapias, Estefania and Schmitt, Gerhard},
  title     = {New Methods in Urban Analysis and Simulation: Documentation of teaching results from the spring semester 2015},
  organization    = {ETH Zurich},
  doi       = {10.25643/bauhaus-universitaet.2505},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25052},
  pages     = {76},
  abstract  = {Documentation of teaching results from the spring semester 2015 at the chair of Information Architecture at ETH Zurich},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {CPlan: An Open Source Library for Computational Analysis and Synthesis},
  series = {33rd eCAADe Conference},
  booktitle = {33rd eCAADe Conference},
  editor    = {Martens, Bob and Wurzer, G, Gabriel and Grasl, Tomas and Lorenz, Wolfgang and Schaffranek, Richard},
  publisher = {Vienna University of Technology},
  address   = {Vienna},
  doi       = {10.25643/bauhaus-universitaet.2503},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25037},
  pages     = {245 -- 250},
  abstract  = {Some caad packages offer additional support for the optimization of spatial configurations, but the possibilities for applying optimization are usually limited either by the complexity of the data model or by the constraints of the underlying caad system. Since we missed a system that allows to experiment with optimization techniques for the synthesis of spatial configurations, we developed a collection of methods over the past years. This collection is now combined in the presented open source library for computational planning synthesis, called CPlan. The aim of the library is to provide an easy to use programming framework with a flat learning curve for people with basic programming knowledge. It offers an extensible structure that allows to add new customized parts for various purposes. In this paper the existing functionality of the CPlan library is described.},
  subject      = {Architektur},
  language  = {en}
}
@article{KnechtKoenig,
  author    = {Knecht, Katja and K{\"o}nig, Reinhard},
  title     = {Automatische Grundst{\"u}cksumlegung mithilfe von Unterteilungsalgorithmen und typenbasierte Generierung von Stadtstrukturen},
  doi       = {10.25643/bauhaus-universitaet.2673},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160822-26730},
  abstract  = {Dieses Arbeitspapier beschreibt, wie ausgehend von einem vorhandenen Straßennetzwerk Bebauungsareale mithilfe von Unterteilungsalgorithmen automatisch umgelegt, d.h. in Grundst{\"u}cke unterteilt, und anschließend auf Basis verschiedener st{\"a}dtebaulicher Typen bebaut werden k{\"o}nnen. Die Unterteilung von Bebauungsarealen und die Generierung von Bebauungsstrukturen unterliegen dabei bestimmten stadtplanerischen Einschr{\"a}nkungen, Vorgaben und Parametern. Ziel ist es aus den dargestellten Untersuchungen heraus ein Vorschlagssystem f{\"u}r stadtplanerische Entw{\"u}rfe zu entwickeln, das anhand der Umsetzung eines ersten Softwareprototyps zur Generierung von Stadtstrukturen weiter diskutiert wird.},
  subject      = {Automatisierung},
  language  = {de}
}
@techreport{KoenigTapiasSchmitt,
  author    = {K{\"o}nig, Reinhard and Tapias, Estefania and Schmitt, Gerhard},
  title     = {New Methods in Urban Analysis and Simulation: Documentation of teaching results from the autumn semester 2013},
  doi       = {10.25643/bauhaus-universitaet.2516},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160121-25168},
  pages     = {60},
  abstract  = {Documentation of teaching results from the autumn semester 2013 at ETH Zurich},
  subject      = {St{\"a}dtebau},
  language  = {en}
}
@article{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {Computers in the design phase - Ten thesis on their uselessness},
  series = {Der Generalist},
  journal   = {Der Generalist},
  doi       = {10.25643/bauhaus-universitaet.2607},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-26075},
  abstract  = {At the end of the 1960s, architects at various universities world- wide began to explore the potential of computer technology for their profession. With the decline in prices for PCs in the 1990s and the development of various computer-aided architectural design systems (CAAD), the use of such systems in architectural and planning offices grew continuously. Because today no ar- chitectural office manages without a costly CAAD system and because intensive soſtware training has become an integral part of a university education, the question arises about what influence the various computer systems have had on the design process forming the core of architectural practice. The text at hand devel- ops ten theses about why there has been no success to this day in introducing computers such that new qualitative possibilities for design result. RESTRICTEDNESS},
  subject      = {CAD},
  language  = {en}
}
@techreport{KoenigTapiasSchmitt,
  author    = {K{\"o}nig, Reinhard and Tapias, Estefania and Schmitt, Gerhard},
  title     = {New Methods in Urban Analysis and Simulation: Documentation of the teaching results from the spring semester 2014},
  doi       = {10.25643/bauhaus-universitaet.2515},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160121-25154},
  pages     = {62},
  abstract  = {Documentation of the teaching results from the spring semester 2014 at ETH Zurich},
  subject      = {St{\"a}dtebau},
  language  = {en}
}
@article{KoenigStandfestSchmitt,
  author    = {K{\"o}nig, Reinhard and Standfest, Matthias and Schmitt, Gerhard},
  title     = {Evolutionary multi-criteria optimization for building layout planning: Exemplary application based on the PSSA framework},
  series = {32nd eCAADe Conference - Volume 2},
  journal   = {32nd eCAADe Conference - Volume 2},
  editor    = {Thompson, Emine Mine},
  doi       = {10.25643/bauhaus-universitaet.2513},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160121-25139},
  pages     = {567 -- 574},
  abstract  = {When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. Planners typically draw on past experience when subjectively prioritising which aspects to consider with which degree of importance for their planning concepts. This practice, although understandable, places power and authority in the hands of people who have varying degrees of expertise, which means that the best possible solution is not always found, because it is either not sought or the problem is regarded as being too complex for human capabilities. To improve this situation, the project presented here shows the potential of multi-criteria optimisation algorithms using the example of a new housing layout for an urban block. In addition it is shown, how Self-Organizing-Maps can be used to visualise multi-dimensional solution spaces in an easy analysable and comprehensible form.},
  subject      = {Architektur},
  language  = {en}
}
@article{KoenigKnecht,
  author    = {K{\"o}nig, Reinhard and Knecht, Katja},
  title     = {Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision},
  series = {Artificial Intelligence for Engineering Design, Analysis and Manufacturing},
  journal   = {Artificial Intelligence for Engineering Design, Analysis and Manufacturing},
  pages     = {285 -- 299},
  abstract  = {We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties.},
  subject      = {Architektur},
  language  = {en}
}